2016 Training Center
Transcript of 2016 Training Center
-
8/15/2019 2016 Training Center
1/16
-
8/15/2019 2016 Training Center
2/162
EDITORIAL
Having skilled teams that fully understand their products to maintain optimum production
conditions is a priority for engineering or maintenance departments.
For the last thirty years, the Leroy-Somer Training Center has been helping its clients develop their teams’
skills.
Every year we train over 2000 people in our Training Center in Angoulême.
The sessions are held in well-equipped facilities where role-playing exercises in close to real-life situations
are organized in complete safety.
Our trainers all have extensive in-company experience enabling them to devise training modules that meet
your needs. Training sessions can also be held on-site.
The Leroy-Somer Training Center has signed the FIECC* Quality Commitment Charter. It guarantees the
high quality of the entire training program preparation process.
We hope this new catalogue will provide you with the training solutions you need. We look forward to
meeting you either in our Training Center or on your own premises.
* Federation of electrical, electronic and communication industries
Alain BONDOUX Product Training Manager
-
8/15/2019 2016 Training Center
3/163
Table of content
GENERAL TRAINING - THEORETICAL
SPECIFIC PRODUCT TRAINING - PRACTICAL
CUSTOMIZED TRAINING
PRACTICAL INFORMATION
FIT 300 - Vibration analysis and noise analysis on a rotating machine .................................................... 4
ALT 1 - Alternators specication and selection - Basics ........................................................................... 5
ALT 2 - Alternators specication and selection - Advanced ...................................................................... 6
AVR 1 - Analog AVRs for low voltage alternators ..................................................................................... 7
AVR 2 - Digital AVRs for low voltage alternators ...................................................................................... 8
AVR 3 - Analog AVRs for medium & high voltage alternators (R600) ....................................................... 9
AVR 4 - Digital AVRs for medium & high voltage alternators (D600) ...................................................... 10
AVR 5 - Integrated generator set AVR/controller (ControlReg 200/200P) ................................................. 11
ALT 3 - Alternators maintenance ............................................................................................................ 12
Customized training courses .................................................................................................................. 13
Practical information and registration ..................................................................................................... 14
General training terms and conditions .................................................................................................... 15
Theme
Items
SELECTION
OPERATION
MAINTENANCE
-
8/15/2019 2016 Training Center
4/164
PRODUCTSEL
ECTION
Vibration analysis and noise analysis on a rotating machine
FIT 300
Level: Basics
After the training, the trainees will be able to:
- Identify the terms of the vibration analysis and their applications
- Analyse a specications sheet specic to noise - vibrations
- Determine a design process taking vibration constraints into consideration
- Perform a pre-analysis based on a vibration measurement report
OBJECTIVES
Price: €850 excl. tax/trainee
Duration: 2 days
Attendance*: 3 to 4 participants
Prerequisites: None
Location: Angoulême, France
Distribution: 30% practical -70% theoretical
AUDIENCE
- Design ofce technician
- Maintenance technician
CONTENT
- Denitions, measurement units, measurement points and
associated standards in vibration
- Spectral analysis, denitions, examples, settings
- Diagnostic process from spectrums in vibration and noise
- Resonance: denition, measurement and calculation
- Denitions, measurement units, measurement points and
associated standards in acoustics
- Design approach: methodology, acceptance criteria, global
process
- Case studies on application with motor / alternator
RELATED PRODUCTS
- Alternators - Electric motors
*The Course is confrmed once at least 3 inter and/or intra company participants have signed up.
Training booking and information:
http://lrsm.co/training-epg-en
-
8/15/2019 2016 Training Center
5/16
-
8/15/2019 2016 Training Center
6/166
PRODUCTSEL
ECTION
Alternators specication and selection
ALT 2
Level: Advanced
After the training, the trainees will be able to:
- Understand the excitation and regulation principles of the alternators
- Identify the details of the electrical parameters and mechanical congurations
- Select an alternator according to a specications sheet
OBJECTIVES
Price: €1313 excl. tax/trainee
Duration: 3 days
Attendance*: 4 to 8 participants
Prerequisites: Knowledge inelectrical engineering (basics)
Location: Angoulême, France
Distribution: 30% practical -70% theoretical
AUDIENCE
- Design ofce technician
- Sales engineer - Genset manufacturer
CONTENT
- Reminder on the basics of the different excitation systems
- Presentation of the operating modes and parallel running
- Discovery of help options: LAM, U/F, equalisation, AREP, ...
- Presentation of electrical engineering basics about alternators
(insulation, temperature rises, harmonics, neutral point,
reactance, PQ diagram, IEEE diagram, curves, etc)
- Presentation of mechanical aspects: construction (IM),
protection (IP), cooling (IC), main bearings, terminal box
- Study of real-world cases based on trainee experiences
RELATED PRODUCTS
- Synchronous alternators of the Leroy-Somer range
*The Course is confrmed once at least 4 inter and/or intra company participants have signed up.
Training booking and information:
http://lrsm.co/training-epg-en
-
8/15/2019 2016 Training Center
7/167
S P E C I F I C
P R
O D U C T
Analog AVRs for low voltage alternators
AVR 1
Level: Intermediate
OBJECTIVES
AUDIENCE
- Maintenance technician
- Design ofce technician- After-sales department technician
- User/Operator
- Genset manufacturer
- Services Centre
CONTENT
- Detail of the excitation systems
- Presentation of the AVR global range
- Presentation, parameter details, connections of the AVR
- Presentation of AVRs and additional modules
- Practical cases of use: voltage regulation, power factor,
KVAr, stability parameters
RELATED PRODUCTS
- AVRs: R220, R250, R438, R450, R449, ...
- Additional modules: R726, R731
Price: €978 excl. tax/trainee
Duration: 2 days
Attendance*: 2 to 4 participants
Prerequisites: ALT1recommended + Knowledgeelectrical basics and electricalrisks habilitation
Location: Angoulême, France
Distribution: 75% practical -25% theoretical
After the training, the trainees will be able to:
- Connect AVRs (AVR range for low voltage alternators)
- Adjust analog AVRs
- Diagnose incorrect AVR operation
*The Course is confrmed once at least 2 inter and/or intra company participants have signed up.
Training booking and information:
http://lrsm.co/training-epg-en
-
8/15/2019 2016 Training Center
8/168
SPECIFIC
PR
ODUCT
Digital AVRs for low voltage alternators
AVR 2
Level: Intermediate
After the training, the trainees will be able to:
- Connect the digital AVR for low voltage range
- Adjust the digital AVR
- Diagnose incorrect AVR operation
- Use the Easyreg© software
OBJECTIVES
Price: €978 excl. tax/trainee
Duration: 2 days
Attendance*: 2 to 4 participants
Prerequisites: ALT1recommended + Knowledgeelectrical basics and electricalrisks habilitation
Location: Angoulême or Orléans,
France
Distribution: 75% practical -25% theoretical
AUDIENCE
- Maintenance technician
- Design ofce technician- After-sales department technician
- User/Operator
- Genset manufacturer
- Services Centre
CONTENT
- Details of the excitation systems
- Presentation, parameter details, connections of the D510C
- Practical cases of use: voltage regulation, power factor,
KVAr, stability parameters and manual mode
RELATED PRODUCTS
- Digital AVR: D510C
*The Course is confrmed once at least 2 inter and/or intra company participants have signed up.
Training booking and information:
http://lrsm.co/training-epg-en
-
8/15/2019 2016 Training Center
9/169
S P E C I F I C
P R
O D U C T
Analog AVRs for medium & high voltage alternators (R600)
AVR 3
Level: Intermediate
OBJECTIVES
AUDIENCE
- Maintenance technician
- Design ofce technician- After-sales department technician
- User/Operator
- Genset manufacturer
- Services Centre
CONTENT
- Details of the excitation systems
- Presentation of the analog range
- Parameters and connections of the AVR
- Practical cases of use: voltage regulation, power factor,
KVAr, stability parameters
RELATED PRODUCTS
- Analog AVRs of the R610 and R630 range
For medium & high voltage alternators
Price: €978 excl. tax/trainee
Duration: 2 days
Attendance*: 2 to 4 participants
Prerequisites: ALT1recommended + Knowledgeelectrical basics and electricalrisks habilitation
Location: Orléans, France
Distribution: 75% practical -25% theoretical
After the training, the trainees will be able to:
- Connect AVRs (R610 and R630)
- Adjust analog AVRs
- Diagnose incorrect AVR operation
*The Course is confrmed once at least 2 inter and/or intra company participants have signed up.
Training booking and information:
http://lrsm.co/training-epg-en
-
8/15/2019 2016 Training Center
10/1610
SPECIFIC
PR
ODUCT
Digital AVRs for medium & high voltage alternators (D600) AVR 4
Level: Intermediate
After the training, the trainees will be able to:
- Connect and adjust digital AVRs for medium & high voltage (D610 and D630)
- Congure digital AVRs with SUPD600
- Diagnose incorrect AVR operation
OBJECTIVES
Price: €978 excl. tax/trainee
Duration: 2 days
Attendance*: 2 to 4 participants
Prerequisites: ALT1recommended + Knowledgeelectrical basics and electricalrisks habilitation
Location: Orléans, France
Distribution: 75% practical -25% theoretical
AUDIENCE
- Maintenance technician
- Design ofce technician- After-sales department technician
- User/Operator
- Genset manufacturer
- Services Centre
CONTENT
- Details of the excitation systems
- Presentation of the digital range
- Parameters and connections of the AVR
- Operation of the SUPD600 software
- Practical cases of use: voltage regulation, power factor,
KVAr, stability parameters
RELATED PRODUCTS
- Analog AVRs of the D600 range (D610 and D630)
For medium & high voltage alternators
*The Course is confrmed once at least 2 inter and/or intra company participants have signed up.
Training booking and information:
http://lrsm.co/training-epg-en
-
8/15/2019 2016 Training Center
11/1611
S P E C I F I C
P R
O D U C T
Integrated generator set AVR/controller (ControlReg 200/200P)
AVR 5Level: Basics
AUDIENCE
- Services Centre
- Genset manufacturer - User
CONTENT
- Reminder on electrical magnitudes
- Basics on regulation
- Basic functions on communication with motor (CAN)
- Details on the LS Utility Software
- Details on conguring ControlReg 200/200P
- Use on generator set
RELATED PRODUCTS
- Low Voltage Shunt excitation range alternator
(excitation current below 4 A)
- ControlReg 200
Price: €400 excl. tax/trainee
Duration: 1 day
Attendance*: 4 participants
Prerequisites: Knowledge
Electrical engineering andoperating principle of thealternator
Location: Angoulême, France
Distribution: 50% practical -50% theoretical
After the training, the trainees will be able to:
- Congure the ControlReg 200/200P
- Prepare starting up and installation on site
- Understand the Utility Software
- Run a fault diagnostic
OBJECTIVES
*The Course is confrmed once at least 4 inter and/or intra company participants have signed up.
Training booking and information:
http://lrsm.co/training-epg-en
-
8/15/2019 2016 Training Center
12/1612
T A I L O R E D
T R
A I N I N G
SPECIFIC
PR
ODUCT
Alternators maintenance
ALT 3
AUDIENCE
- Maintenance technician
- After-sales department technician- Services Centre
- Design ofce technician
- User, Operator
- Genset manufacturer
CONTENT
A exible program adapted to your needs, focused on
maintenance of alternators in our workshops, for example:
- Maintenance program recommended
- Taking measurements
- Dismantling/reassembling alternators
- Using manuals, etc
RELATED PRODUCTS
- Type of alternator to be dened according to your request
CUSTOMIZED TRAINING
For more information (objectives, program, price, duration, attendance, location)
Contact us on +33 (0)5 45 94 59 03
Training booking and information:
http://lrsm.co/training-epg-en
-
8/15/2019 2016 Training Center
13/1613
C U S T O M I Z E D T R
A I N I N G
Customized training courses
CUSTOMIZED TRAINING
We can design and organize custom trainings on the denition, selection, operation and maintenance of
alternators and AVRs products in order to meet your specic needs, whatever the context: new hires,
special projects, reinforcement on core competencies…
The training can also focus on specic themes including:
- Grid Code
- Marine specications
- Oil & Gas specications
- Hydro specications
- Maintenance optimization
For those tailored trainings we will work in close relationship with you to answer your needs and bring you
the very best of our expertise and know-how.
Those tailored trainings can be held at the Training Centre, at one of our factories or on your premises,
for groups up to 6 people.
-
8/15/2019 2016 Training Center
14/16
-
8/15/2019 2016 Training Center
15/1615
P R A C T I C A L I N F O R
M A T I O N
General conditions of training
I- SCOPE OF APPLICATION
The Moteurs Leroy-Somer training centre (referred to hereinafter as
the "Centre") designs, offers and conducts intercompany and
intracompany training courses with a classroom-based learning or E-
Learning format.
The Centre also offers companies audit and operational advisoryservices. These services are collectively referred to as the "Centre's
Service Offer".
II- PURPOSE
These General Terms of Sale of Training Services (referred to
hereinafter as the "Terms of Sale") apply to all the Centre's Service
Offers pertaining to orders placed with the Centre by any professional
customer (referred to hereinafter as the "Customer").
By placing an order, the Customer fully and unreservedly accepts these
Terms of Sale.
The Customer acknowledges that he has received sufficient information
and advice from the Centre to be able to form a decision as to whether
the Service Offer meets his needs.
III- TRAINING SERVICES
1- Enrolment on any training course will only be recorded after the
Centre has received a signed training agreement. The Centre will
process enrolment applications in their order of receipt until the course
is full. When a training course is intended for accredited electricians,
the trainees must provide proof of accreditation before the start of the
course in order to be able to work on live electrical equipment. The
Centre reserves the right to prohibit any trainee who has failed to
prove accreditation from working on live electrical equipment; the
Centre will not accept liability under any circumstances, in particular
for any physical accident.
2- For each training course a training agreement will be sent in
duplicate, which must be signed and returned to the Centre. The
Customer will receive an attendance certificate on completion of the
training course. The Centre reserves the right to modify the content
of a training course at any time without advance notice, in which case
no compensation will be payable.3- When a training course is to be covered by a professional training
funding body (organisme paritaire collecteuragréé), the Customer
must apply for funding before the start of the course and
confirmation of funding must be enclosed with the training agreement.
If a course is partially funded, the Customer will be responsible for
paying the balance. If confirmation of funding is not received by the
training course start date, the Centre will charge the Customer the full
amount.
4- Postponement by the Centre. If an insufficient number of trainees
sign up for a course, the Centre reserves the right to postpone the
course before the start date, in which case no compensation will be
payable.
Cancellation or postponement of training by the Customer: If the
Customer cancels or postpones a scheduled training course he must
compensate the Centre on the following basis: i) postponement or
cancellation more than 30 days before the start date: no compensation;ii) postponement or cancellation within 30 days and more than 15
days before the start date: 30% of the cost of the training will be
charged; iii) postponement or cancellation within 15 days of the start
date: the Customer will be charged 70% of the cost of the training.
IV- ORDERS
The Centre will detail its training offer and prices in a Service Offer,
which will remain valid for one month after receipt of the Offer. On
receipt of the orderor signature of the order form included in the Offer,
the Centre will draw up a training agreement.
V- PRICE-PAYMENT
Invoices are payable cash by bank draft or truncated bill of exchange, on
receipt and within 30 (thirty) days of the end of the month in which the
invoice was issued.
A formal demand for payment will be sent in the event of non-payment
of any invoice on its due date; if payment is still not forthcoming the
Centre will charge:
- a late-payment penalty calculated from the due date on the basis ofthe total amount owed including VAT (if VAT is payable),
- compensation for collection costs of at least €40, and all current
services will be suspended.
The late-payment penalty will correspond to the most recent European
Central Bank refinancing rate plus 10 points.
If legal proceedings are necessary to collect payment, the outstanding
amount will be increased by 15% (fifteen percent) or by at least €500
(five hundred euros) excluding VAT, plus any applicable taxes.
VI- CONFIDENTIALITY
Both parties undertake to treat as confidential all technical,
commercial, financial and other information received from the other
party by word-of-mouth, in writing or by any other means of
communication during the negotiation and/or fulfillment of any
order.This confidentiality obligation will apply throughout the fulfilment of
the order and for a further 5 (five) years after its expiry or termination,
irrespective of the reason.
VII- INTELLECTUAL PROPERTY
The Centre is the owner of the intellectual property rights to the training
courses it offers. All the materials and content used by the Centre,
irrespective of their form, shall remain the sole property of the Centre.
The Customer is not entitled to use, reproduce, transform, or exploit the
training materials within or outside of its company without the Centre's
prior written agreement. The Customer also undertakes not to duplicate
the training by dispensing it to another person, unless expressly
authorized to do so.
VIII- DATA PROCESSING
The personal data that the Customer provides to the Centre pursuant to
and in fulfilment of the orders and/or sales may be sent to the Centre's
contractual partners for fulfilment of the orders. The French data
protection regulations (namely the data protection act [loi informatique
et libertés] of 6 January 1978) entitle the Customer to query, access and
correct personal data and to object to its use on legitimate grounds, by
sending an e-mail to: [email protected]
IX- DISPUTES
THIS CONTRACT IS GOVERNED BY FRENCH LAW.
IF THE PARTIES FAIL TO REACH AN AMICABLE AGREEMENT, AND
NOTWITHSTANDING ANY CLAUSE TO THE CONTRARY, ANY DISPUTE
RELATING TO THE INTERPRETATION AND/OR FULFILMENT OF AN ORDER
SHALL BE REFERRED TO THE COURTS WITH JURISDICTION IN ANGOULEME
(FRANCE), NOTWITHSTANDING THE INTRODUCTION OF THIRD
PARTIES OR THE EXISTENCE OF MULTIPLE DEFENDANTS.
Prices are stated exclusive of VAT and are valid for the term of the
Offer or until a new catalogue is issued.If training takes place outside the Centre, all associated costs such as
travel expenses incurred by consultants and trainers, room rental costs,
the cost of documentation and of and the rental of training equipment
(such as video recorders), etc. will be charged in addition.
CL /AB /15.05.2015V4
-
8/15/2019 2016 Training Center
16/16
www.emersonindustrial.comwww.emerson.com/epg
© Emerson 2014. The information contained in this brochure is for guidance only and does notform part of any contract. The accuracy cannot be guaranteed as Emerson have an ongoingprocess of development and reserve the right to change the specication of their productswithout notice. Moteurs Leroy-Somer SAS. Headquarters: Bd Marcellin Leroy, CS 10015, 16915 AngoulêmeCedex 9, France. Share Capital: 65 800 512 €, RCS Angoulême 338 567 258.