2016 Membership Directory and Showcase

Precast Concrete Manufacturers' Association of Texas

2015-2016 Membership Directory

Quality takes Shape in the Form

Before the first piece is cast, a form is designed and built that brings the designer’s vision to life. It’s here — inside well-built, dimensionally accurate, durable forms – that precast integrity, intrinsic value and quality are born.

For more than 40 years, Hamilton Form Company has delivered quality forms for precast/prestressedconcrete production. During that time our signature blue forms have come to symbolized the precaster’s commitment to quality and have brought vision to reality.

7009 Midway Road, Fort Worth, Texas 76118 817.590.2111 • www.hamiltonform.com

Hamilton Form Company, Ltd.

Custom forms. Custom equipment. Practical solutions.

Your vision – our forms

PCMA • 3

PresidentCarlos D. CernaManco Structures, Ltd.Schertz, Texas

Vice PresidentDavid MalaerValley Prestress Products, Inc..Eagle Lake, Texas

Immediate Past PresidentGill HeldenfelsHeldenfels Enterprises, Inc.San Marcos, Texas

Executive DirectorChris J. LechnerPO Box 310358New Braunfels, Texas [email protected]

’m not particularly fond of change. I have my processes and my products;they work well and I like them the way they are. But, just because I amnot a fan of change doesn’t mean I don’t make changes. I started workingwith prestressed concrete in 1979. At that time the precast/prestressedconcrete industry was well under way, although most folks engaged inprecast and prestressed concrete were still figuring it out. e PCI Design Handbook for Precast/Prestressed Concrete was only around an inch thick.

But things change. A driver of change in our industry is the person whoasks, “Can we do this?’; “Why don’t we try this?” And, my favorite, “If we did it this way, we could…” From simple questions an industry has evolved, innovated, and changed. Among other advances, we haveembraced longer spans, higher concrete strengths, a variety of texturesand finishes and unique forming applications. In its seventh edition, the PCI Design Handbook is now twice as thick, and is regularly accompanied by numerous technical works, papers and publications regarding the industry. Many times over the amount of information isnow available; and all on a thumb drive if you so desire. Ahhh, anotherchange! Technology! I can ramble on about the design innovationscomputer analysis has brought to precast/ prestressed concrete; but I’m not going there. I’m going somewhere bigger, Texas. Yes, Texas is changing, too.

Texas is growing, rapidly. According to a report from Texas' Office of the State Demographer, the state’s population is expected to double by 2050. at would be over 54 million people! at growth requireshousing, hospitals, schools, roads, bridges and parking. Yes, we got thatand our industry is ready to move Texas forward. In the last ten years,PCMA of Texas’ membership has doubled, but PCMA’ s basic premisehasn’t changed. It remains a group of dedicated precast concrete manufacturers, suppliers and design professionals who set aside the competitive nature of the business to concentrate on the industry’s

growth. PCMA focuses on technical manufacturing innovation and education of design and construction professionals. Our producer members are all TxDOT Approved or PCI Certified. We share information throughinvolvement in manynational and international groups such as Precast/ Prestressed ConcreteInstitute (PCI), National Precast Concrete Association (NPCA),American Concrete Institute (ACI), American Society for Testing andMaterials (ASTM), American Association of State Highway and Transportation Officials (ASHTO) among many others.

Our Members’ involvement brings multiple benefits to project owners anddesigners. Flexibility, expanding aesthetics, high performance products,production efficiencies and environmental protections all contribute tostructures that meet the demands of durability, life safety and energy efficiency. Changing markets, customer demands and opportunities constantly raise the bar and yes, compel us to change and to continuallyimprove our products.

For all the changes, I rest easy because precast concrete remains a businessniche that relies on passionate involvement. PCMA’s membership caresabout our industry. Partnerships of owners, designers, precasters andsuppliers continue to collaborate on the projects you see in this publication.From iconic buildings to practical structures, precast concrete delivers aunique construction system that provides unmatched design freedomand inherent economy.

Please enjoy our Directory and Member Showcase and call any of ourmembers for valuable input on your next project. We will be happy tohelp, because within the precast/prestressed concrete industry, the morethings change, the more they stay the same.

I

The More Things Change, the More Things Stay the SameCarlos D. Cerna, President, PCMA of Texas

Precast Concrete Manufacturers' Association of Texas

2015-16 MEMBERSHIP

Austin PrestressBexar Concrete Works I, Ltd.Coreslab Structures (OKLA) Inc.Coreslab Structures (Texas) Inc.East Texas Precast Co.Flexicore of TexasGate Precast Co.Heldenfels Enterprises, Inc.Manco Structures, Ltd.NAPCO Precast, LLCTexas Concrete Partners, L.P.Tindall CorporationTricon Precast, Ltd.Valley PreStress Products, Inc.

PCMA • 4

Consult with Gate Precast

WWW.GATEPRECAST.COM(888) 470-3450

Precast Cladding Producer of Perot Museum

of Nature and Science

“With its Cartesian cube and its free-flowing, lavalike plinth, the Perot Museum is one of Morphosis’s most remarkable works to date.”

-— ARCHITECTURAL RECORD

Gate Precast Company

Expand your understanding of how Gate Precast used Design Assist and BIM to build this iconic structure.

Learn & EarnThe Building of the Perot MuseumRegister: (888) 470-3450Register: (888) 470-3450

www.gateprecast.com

Perot Museum of Nature and ScienceDallas, Texas

PCMA • 5

High Performance Buildings and Precast Concrete

High performance building designs are becoming essential to meet new code requirements, as well as the expectations of funding entities,owners, and developers. State-of-the-art building designs require high performance building materials and building enclosure systems. Precast concrete is a high performance material that integrates easily with other systems and inherently provides the versatility, efficiency,and resiliency needed to meet the multi-hazard requirements and long-term demands of high performance structures. Precast concreteconstruction offers project stakeholders a whole host of benefits which will help optimize a structure, improve performance, and reducelife-cycle costs. A summary of the key attributes and benefits that precast concrete provides is shown below. (Continued on page 7)

High Performance Precast Concrete Building EnclosuresBy Brian Miller, PE, LEED AP

Attributes and Benefits of Precast Concrete

VERSATILE EFFICIENT RESILIENT

Aesthetic VersatilityVirtually any color, form and texture

Facade integrationHistoric compatibilityStructural Versatility

Load-bearing envelopesEconomical sectionsLong open spansUse VersatilityRecyclable

Deconstructive reuseAdaptive reuse

Site EfficiencyMinimal site disturbance

Negligible wasteAccelerated construction

Energy and Operational EfficiencyScalable performanceThermally efficientLow life-cycle costsRisk ReductionDesign assist

Reduced detailing and tradesEnhanced profitability

Structure DurabilityLong service life

Barrier wall systemFunctional resilience

Multi-Hazard ProtectionStorm resistance

Earthquake resistanceBlast resistance

Life Safety and HealthIndoor environmental quality

Passive fire resistanceMeets FEMA 361

Brian D. Miller, P.E., LEED AP

Brian D. Miller, P.E., LEED AP is themanaging director of business development for the Precast/Prestressed Concrete all over theU.S. including office, retail, residential, institutional and parking structures.

PCMA • 6

PCMA • 7

Building Efficiency and Thermal ManagementA core goal of high performance buildings is to reduce energy consumption. A key component in accomplishing this goal is to optimize enclosure systems to provide excellent thermal management.

Heat is typically managed through insulation, or materials that have a high resistanceto heat flow (R-value). Precast concrete enclosure systems allow for continuous insulation (ci), running edge-to-edge in wall panels, which meets ASHRAE’s 90.1code requirement. Furthermore, most precast concrete enclosure systems, such as insulated sandwich wall panels, use composite or coated connectors to attach theouter wythe of concrete to the inner wythe. ese connectors do not thermally conduct, so thermal bridging through the wall panel is essentially eliminated.

Another benefit more unique to concrete is that of thermal mass. Precast concretehas a high heat capacity, which means it stores and releases heat slowly. is allowsan enclosure system to work like a battery storing up heat energy. Heat comes fromseveral sources beyond the heating, ventilating and air conditioning (HVAC) systemincluding the sun, lights, equipment, and occupants. When proper insulation is combined with very little thermal bridging, an enclosure system slows down heattransfer, which reduces the energy needed to heat and cool a structure. Howeverwhen combined with thermal mass, a portion of the internal heat energy is storedand made available to help maintain the desired indoor temperature. is further reduces the amount of energy needed to heat and cool a structure, thus improvingenergy efficiency even more. e result can be a significant reduction in the amountof energy needed to heat and cool a building – more than 30% relative to baselinecodes. is translates to less money spent in operating costs.

Another benefit of thermal mass is a delay in when the inside peak heating and cooling times occur. is is the result of thermal lag, or the time it takes for heat

to transfer. As temperatures rise and fall throughout a 24-hour period, there is apoint when the outside temperature peaks both high and low. e inside of thestructure is always trying to “catch-up” with the outside temperature. e greater thedifference in temperatures, the more energy required to maintain the indoor temper-ature. If the inside peak times can be shied to when the difference in temperature isless, the result will be less energy needed to accomplish the same task. Note: hot airalways flows towards cold air (second law of thermodynamics), so whether it’s hotteror colder only influences the direction of heat flow.

Combined EffectIt is important to evaluate the net effect of all of these components. Oen R-valuesfor an enclosure’s section are determined by calculating the material R-value, which issimply the summation of the component R-values. However, this approach does nottake into account thermal bridging and thermal mass. To better reflect the actual performance of an enclosure section an effective or performance R-value should bedetermined. ere are several soware programs available to run this type of analysis.Insulation providers and precast producers can also to help with this type of analysisas well.

Precast concrete systems usually have a greater effective R-value than their materialR-value, due to negligible thermal bridging, thermal mass, etc. By using the effectiveR-value for determining heating and cooling loads, HVAC designers may be able to reduce the size of their equipment and hence reduce first costs for a structure. is results in the systems operating more efficiently, further reducing life-cycle costs.

When combined with the benefits of precast concrete being an air barrier and avapor retarder at three-inches thick or greater, high performance precast provides all three (c.i., air barrier and vapor retarder) in one efficient system.

High Performance Precast Concrete Building Enclosures (Continued)

PCMA • 8

PCMA • 9

PO Box 18833 Austin, TX 78760

Bryan Villas

512.243.1090

HIGHWAYS/BRIDGES

Prestressed Deck Panels

Sound Walls

Retaining Walls

AUSTIN PRESTRESS

TxDot Approved

PCMA Member Profile/Showcase

PCMA • 10

located in San Antonio, Texas, is the largest independently owned precast concrete company in Texas. Precast concrete is our only business, and our 35 years of expertise reflects that singular concentration. We design and manufacture standard and custom precast concrete products to meet large-scale infrastructure demands for highway construction, railroad bridge construction and products for the Petro Chemical markets.

Since 1977, we have been on the cutting edge of concrete technology, combining proven manufacturing techniques with new technologies to provide customers with proven reliability.

Our staff of engineers and technicians work with Engineers, Owners, Contractors and Universities in research and testing,to advance the industry and continue to push the envelope in bridge component manufacturing. Our employees stand committed to upholding core values of reliability, quality and service in cutting edge ways. Every day they provide outstanding customer service and custom engineered solutions. Our reliability and attention to detail that has earned us scores of satisfied clients.

Bexar Concrete Works,

Bexar Concrete Works I, Ltd.

HIGHWAYS/BRIDGES

Deck Slabs/Box Girders

AASHTO I Beams

Full Depth & Sip Deck Panels

Sound Walls

Precast Substructures

Retaining Walls

PO Box 700250

San Antonio, TX 78270

Contact: Jorge Hinojosa, P.E.

210.497.3773

[email protected]

TxDot Approved


PCMA • 11

Coreslab Structures (OKLA) Inc.

817 SE 55th Street

Oklahoma City, OK. 73129

PCMA Representative:

Sales & PCMA Rep:

Robert Shade

405.632.4944

[email protected]

BUILDING SYSTEMS

Parking Structures

Office Buildings

Above-ground Storm Shelters

Sports/Stadiums Facilities

Data Centers

Health Care Facilities

Manufacturing Facilities

Food Processing Facilities

Correctional Facilities

Bridge/Highway

BUILDING PRODUCTS

Architectural Walls

Architectural Insulated Walls

Insulated Walls

Sadium Risers

Structural Preast

Precast Stairs

Precast shelter-ICC-500 Design

AASHTO I Beams

Office Tower at One PlaceTulsa, Oklahoma

At Coreslab Structures we arecommitted to a future of strength and sustainability, by serving the design community, contractors and owners to meet the building needs of our market,and have gained a reputation for innovation, environmentally sound concreteproducts and customer service. We have been involved in many premier projectsin the state of Oklahoma, southern Kansas, northern Texas and western Arkansas.Our plant produces a full range of structural and architectural precast concreteproducts for use in office buildings, parking structures, correctional facilities,healthcare facilities, and sport stadiums.

Our specialties include:AASHTO bridge I-beamsEducational buildings used as above ground storm shelters

Coreslab Structures (OKLA), Inc.


PCI Plant Certification40 Year Recognition

Above Ground Storm ShelterNewcastle Activity Center Newcastle, Oklahoma

Multiple Span Bridge Tulsa, Oklahoma

PCMA • 12


Coreslab Structures (Texas) Inc.

15916 Anderson Mill Road

Cedar Park,TX 78613


Monty Oehrlein

Sales & PCMA Alternate Rep:

Bob McGee

512.250.0755

[email protected]

BUILDING SYSTEMS

Parking Structures

Commercial Office Buildings


Industrial Facilities


Educational Facilities

Sports/Stadium Facilities

Data Centers

BUILDING PRODUCTS

Architectural Walls


Insulated Wall Panels

Structural Precast

Prominent Pointe Parking GarageAustin, Texas

Architectural finish on spandrels and columns to match office building.

Marriot HotelThe Woodlands, Texas

At Coreslab Structures we believe in the TEAM approach. Our goal is to initiate construction solutions at the beginning of a project to enhance the value of the final structure for theowner/developer. Our TEAM approach in handling today’s increasingly complex construction challenges, includes providing our customers with up frontbudgeting, consultation and input from our experienced in-house, engineering,plant and field staff, which time and again have produced innovative, cost effective results.

Our capabilities vary from total precast office buildings and data centers, to intricate architectural cladding for hospitals and universities, to parking garages of all sizes and finishes, to stadiums and air traffic control towers.

Coreslab Structures (Texas), Inc.

PCMA • 13


East Texas Precast Co. (ETP), located in Hempstead, TX, has been specializing in structural precastcomponents since 1982. Within close proximity to I-10, we are in a primelocation to serve both Houston and the I-35 corridor, as well as WesternLouisiana. With our large production capacity, we are able to manufacture over 20 structures a year. Since our inception, we have provided services to a variety of industries including; Commercial, Medical, Education, Energy, Manufacturing, and more.

East Texas Precast attributes it success to three principles. First, providing a quality product to meet our client’s needs.Second, direct, accurate, and fluid information transfer from ETP to our clients. ese first two principles allow us to achieve our third principle, building long standing relationships with our customers. is principle is what allows us to go beyond just bidding a project because we understand our customer’s preferences as well as they do. When we canachieve this with one of our clients, everyone benefits.

East Texas Precast Company, Ltd.

Mailing Address:

East Texas Precast Co., Ltd.

P.O. Box 579

Waller, TX 77484

Sales:

Chris Romani

281-063-0654

[email protected]

www.easttexasprecast.net

BUILDING SYSTEMS

Parking Structures

Commercial Facilities





Housing Facilities

Sports Stadium Facilities

BUILDING PRODUCTS

Architectural Walls



Structural Precast

Precast Stairs

East Texas Precast Company, Ltd.

PCMA


of Texas is a precast/prestressed company that was established in 1953 in Houston, Texas. We offer many precast/prestressed products custom-designed to meet your business needs. Flexicore has always, and continues to be run by a highly responsive team of motivated employees who provide a wealth of construction and engineering knowledge.

At Flexicore, the quality of our work is paramount. Our comprehensive quality control programs are consistently compliant with TxDOT and numerous other government and private sector agencies. Simply put, if it́ s not right it will not be shipped. We also take your schedule seriously and will work to have products available when you need them.We understand that on the construction site, time is money and we feel it is our job to deliver the right product in theright place at the right time.

Call a Flexicore of Texas representative today and know first-hand that you have a new ally in the success of your business.

FLEXICORE

Flexicore of Texas

P.O. Box 450049

Houston, TX 77245

www.flexicoreoftexas.com

Sales: Gary Fisher

281.437.5700

[email protected]

BUILDING SYSTEMS


Marine Structures


BUILDING PRODUCTS

Structural Precast

Precast Piles

HIGHWAYS/BRIDGES




TxDot Approved

Bridges on New TerritoryBoulevard on prestressedconcrete pile with prestressed concrete box beams.

PCMA • 15


in Hillsboro, TX, manufactures architecturalprecast in its 57,000-square-foot enclosed production facility and is PCI (A1) certified. Gate Precast offers a complete range of in-house preconstruction and construction services includingBIM-trained engineers and a full-time project management team.

Gate Precast

Architectural Precast

1220 Highway 77 North

Hillsboro, Texas 76645

Phone: (254) 582-7200

Operations:

Todd Petty, VP

[email protected]

Sales:

Michael Trosset

Regional Sales & Marketing Manager

Cell: (254) 2665-0526

[email protected]

Bradly Williams

Sales and Marketing

Cell: (254) 221-2983

[email protected]

www.gateprecast.com(888) [email protected]

GATE PRECAST COMPANY

Gate Precast, Hillsboro, TX produced the award-winningPerot Museum of Nature and Science in Dallas, TX.Architect: Morphosis ArchitectsContractor: Balfour Beatty

Observe how precast concrete is designed, fabricatedand installed while earning AIA/CES LUs at Gate’s Precast Concrete Design Center.”

in Pearland, TX, has produced hollow core slabs for over 40 years. e PCI (C2) certified plant, locatedsouth of Houston, produces 4”, 6”, 8”, 10” and 12” thick planks. Gate Precast has the capability to produce 2.4 million sq. .of hollow core annually and has a full-time project management staff.

Gate Precast

Hollow Core3201 Veterans Drive

Pearland, TX

Phone: (281) 485-3273

Operations:

Jim Stini, VP

[email protected]

Sales:

Chris Lodico

Hollow Core Sales

and Estimating

[email protected]

Project Management:

Jim Stini

gatetexas@

mindspring.com

Images: Travis Van Buren

Eight Locations:

Monroevill, AL

Jacksonville, FL

Kissimmee, FL

Winchester, KY

Oxford, NC

Ashland City, TN

Pearland, TX

Hillsboro, TX

PCMA • 16

With manufacturing plants in Corpus Christi and San Marcos,Heldenfels Enterprises fabricates and installs precast prestressed concrete structures for the highway, marine/industrial and building construction markets.

Heldenfels Enterprises, Inc. is the successor to an eminentSouth Texas family business backed by over a century of construction experience - from ship building to highway construction. Its predecessor, Heldenfels Brothers, wasfounded in 1909 by brothers F.W. Heldenfels Sr. and C.A.Heldenfels as a lumber materials business in Beeville, Texas.

As the company grew, it expanded into the construction ofmilitary bases, airports and ever larger highways.

And as their sons and grandsons joined them, HeldenfelsBrothers continued broadening into new markets and capital-izing on technological innovation, always maintaining thestandard of excellence associated with the family Name.

Fred Heldenfels IV, President and CEO of Heldenfels Enterprises, sums it up best: “If we practice good stewardshipthrough our core values of integrity, dependability and inno-vation, we will help foster the growth of new ideas, new markets and new structural innovations. In this way, we willhelp our industry become an ever-more vital part of the nation’s construction markets”.

Heldenfels Enterprises, Inc.

Heldenfels Enterprises, Inc.

5700 IH 35 South,

San Marcos, TX 78666

www.heldenfels.com


Fred Heldenfels, IV

PCMA Alternate Representative &

Contact: Gil Heldenfels

512.396.2376

[email protected]

BUILDING SYSTEMS

Parking StructuresCommercial FacilitiesHealth Care FacilitiesCorrectional FacilitiesEducational FacilitiesMarine StructuresSports/Stadiums FacilitiesGovernment Facilities

BUILDING PRODUCTS

Insulated Wall PanelsStadium Seating RisersStairsDouble TeesBeamsColumns

HIGHWAYS/BRIDGES

TX GirdersSlab BeamsBox BeamsU BeamsPilingCaps

TxDot Approved


W

H Its predecessor, Heldenfels Brothers, was founded in 1909 by brothers

F

Texas A&M Kyle Field Stadium - College Station, TX West 7th Street Bridge Fort Worth, TX Courtesy Nissan Maintenance Facility - Richardson, TX

SH 99 - Grand Parkway Valero Eagle Ford Pipe Racks, Corpus Christi, TX Texas State University Wood Street Parking Garage, San Marcos, TX

PCMA • 17


also known as MANCO, is a leadingspecialty trade contractor specializing in the design, manufacture and installation of precast/prestressed concrete structures since 1968.

Located in Schertz, Texas in the northeast quadrant of the San Antonio metropolitan area, MANCO has provided precast concrete throughout the State of Texas for a variety of structures including parking garages, office buildings, manufacturing facilities, sports arenas, warehouses, schools,industrial plants and detention facilities. MANCO was recently recognizedby the Precast/Prestressed Concrete Institute (PCI) for thirty continuousyears of participation in their Certified Plant Program.

MANCO Structures, Ltd.

Manco Structures, Ltd.

BUILDING SYSTEMS

Parking StructuresCommercial FacilitiesHealth Care FacilitiesCorrectional FacilitiesEducational FacilitiesIndustrial FacilitiesMarine StructuresSports/Stadium Facilities

BUILDING PRODUCTS

Precast Wall PanelsInsulated Wall PanelsHollowcore SlabsStructural PrecastDouble TeesColumnsIT BeamsSpandrelsPrecast StairsPrecast Stadium SeatingSpecialty Precast Products

6106 FM 3009

Schertz, TX 78154

210.690.1705

www.manco-satx.com

PCMA of Texas Representative:

Carlos Cerna

Alternate Representative:

Ruben Valadez

[email protected]

PCMA

, founded in 1994, is located in San Antonio, Texas. PCI Certified for the manufacturing of structural and architectural precast concrete, NAPCO’s 43-acre manufacturing facility incorporates 18 steel casting beds capable ofproducing in excess of 150,000 square feet per week of finished precast products. NAPCO is the recognized leader inparking garages for the multi-family/residential housing market; and the innovator of the ‘Texas Donut’ wrap-aroundparking garage. NAPCO has built more than a dozen stadiums/arenas throughout the state of Texas, including TCU’sAmon Carter Stadium (shown below). We are also one of the leadingproducers of insulated precast concrete productsover the last 15 years. NAPCO’s experienced sales and design staff provides assistance during the conceptual stage; our in-house Engineering and Draing Department delivers unparalleled service in the developmental phase; and our project managers oversee the completion of the construction phase. For more information please visit our website at www.napcosa.com and contact one of our representatives.

NAPCO

The renovation project at TCU’s AmonCarter Stadium began in March of 2011and was completed in May of 2012. The 1,527 precast members were erectedin three distinct phases as scheduled bythe project’s General Contractor, AustinCommercial, L.P. NAPCO produced 100 architectural spandrels and 383 architec-tural walls, together with 916 structuralstadium-seat risers, 9 beams, and 119stair-risers for the project.

NAPCO Precast, LLC

6949 Low Bid Lane


Sales: Lewis Elkins

817.266.1444

[email protected]

Sales: Alvaro Iragorri

210.710.8475

[email protected]

Sales: Kevin Medlin

713.407.0392

[email protected]

Estimating: Ron Olfers

210.424.4363

[email protected]

BUILDING SYSTEMS

Parking Structures






Housing Facilities


BUILDING PRODUCTS

Architectural Walls



Structural Precast

Precast Stairs


PCMA • 19


is a long-running supplier of pre-stressed concrete. We provide service toa variety of owners, such as : Texas Department of Transportation, Phillips Petroleum, ExxonMobil and Dow Chemical.

TCP was established in 1948 and produced the first prestressed girders used by the Texas Department of Transportation in1956. Since that time we have been in continuous production of prestressed/precast products for the state, counties, citiesand various other governmental agencies. In an effort to service the North Texas area, a sister plant was opened in Waco infall of 1970. Both companies were in continuous production until being acquired by new owners and the facilities becameknown as Texas Concrete Partners, L.P. in the fall of 2005. In 2012, TCP’s parent company, Gulf Coast Pre-Stress Partners,LTD. (GCP), offered additional support specifically in the areas of engineering, sales and accounting, which has improvedefficiencies, as well as presented TCP with unmatched resources and experience.

TCP is interested in innovation and participates regularly in major research projects. roughout the years, research projects have included working with the University of Nebraska, University of Houston,Texas A&M University, University of Texas, the Federal Highway Administration and the State of Texas.

TCP has had the opportunity of working on many of thelargest and most aggressively scheduled design build projectsTXDOT has constructed. North Tarrant Express, LBJ635, and IH35E Managed Lanes required not only elevated production and shipping schedules, but the ability to effectively communicate and forecast with ourclients to promote a safe quality experience.

We continue our support of growth to the precast/prestressed industry through offering knowledge, in-tegrity and reliability with competitive confidence andthat each inquiry or project is of the upmost importance.

Texas Concrete Partners, L.P. (TCP)

City of Addison Arapaho Bridge

Texas Concrete Partners, L.P.

Elm Mott – PO Box 336, TX 76640

Michael Spruill, COO

[email protected]

254-822-1351

Victoria – PO Box 1070, TX 77902

Rusty Smith, General Manager

[email protected]

361.573.9145

BUILDING PRODUCTS

Structural Precast

Precast Piles

HIGHWAYS/BRIDGES


AASHTO I Beams

Precast Pile

Spun Cast Concrete Cylinder Pile


TxDot Approved

PCMA • 20


is a richly diverse industry leader inthe design, manufacture and erection of precast, prestressed concretesystems for industrial, mixed-use, educational, commercial, stadiumsand parking structures. We are also a leading supplier of under-ground structures and fully up-fitted modular prison cells.

Tindall efficiently and economically designs, manufactures anderects total precast systems that exceed customer requirements. We resolve structural challenges, engineer unique designs and deliver every project on time, in budget and to exacting specifications.

Why Total Precast? Total precast projects provide a faster track tooccupancy and revenues by compressing schedules, increasing productivity and minimizing waste.

Precast Sustainability - Tindall precast, prestressed concrete productshelp add crucial points toward attaining LEED certification andproviding safer, more energy efficient, Greener environments. We also support renewable energy resources.

As demands increase for fast design-build schedules, Green buildingmethods and sustainable structures, precast, prestressed concrete systems are fast becoming the most effective way of achieving thesegoals. at is where Tindall comes in.

• We have an exceptional depth of both practical and industry expertise

• Our knowledge, scale and experience allow us to creatively solve structural issues quickly, competently and economically

• We are passionate about taking on challenges and delivering quality precast systems

Tindall is committed to gaining a clear understanding of the customer’s requirements and conforming to them. We will fulfill all of these requirements by delivering defect-free products and services.

Tindall Corporation

Tindall Corporation

www.tindallcorp.com

Headquarters:3076 N. Blackstock Rd.Spartanburg, SC 29301

Factory:

222 W. Malone Ave.


Over 120,000 square foot covered production area on a 48 acre site.

Phillip Iverson, Sales Manager

210. 248.2349 office

404.694.9390 cell

[email protected]

BUILDING SYSTEMS

Parking Structures






Housing Facilities

Marine Structures

BUILDING PRODUCTS

Architectural Walls



Structural Precast


PCMA • 21


Founded in 1987, Tricon Precast Ltd. provides innovative Walling and Bridge Systems throughout North America. With its headquartersin Houston, Tricon currently operates two large state of theart plants in Texas - Houston serving the Gulf Coast regionand San Antonio serving the Central Texas region makingit one of the largest precast concrete manufacturers in thestate. Tricon’s unique patented systems are also producedand offered by a growing number of precast affiliate partners throughout North America. Tricon EngineeringGroup, based in Grand Rapids, MI, provides civil and structural engineering services for projects nationwide.

But there is much more to Tricon Precast than quality products. ere’s theproven ability to work closely with you on a wide range of public infrastructureprojects and programs – from small country road bridges to classic D.O.T. highway construction. Only Tricon Precast offers the responsiveness necessaryto meet the demands of today's largest design-build projects.

A network of precast concrete manufactures, through licensing agreements, enables the Tricon systems to be available nationally and internationally. Tricon supports ongoing research and design of prestressed and precast concrete, along with construction and installation best practices. is, in combination with civil, structural and geotechnical engineering support from our Tricon Engineering Group, makes Tricon Precast the right choice for your next project.

Tricon Precast Ltd.

Tricon Precast Ltd.

HIGHWAYS/BRIDGES

Sound Walls


Retaining Walls

Traffic Barriers

www.triconprecast.com

15055 Henry Rd.

Houston, TX 77060


Gilbert Flores

PCMA Alternate Rep:

Robert May

Sales: Robert May

281.931.9832

[email protected]

TxDot Approved

PCMA • 22


is a privately held precast prestress concrete manufacturer supplying a single contractor customer. Primarily a transportation products manufacturer, Valley carries out its Prestress operations in Eagle Lake, Texas and also has precast operations in Houston and additional Prestress capacity in the Dallas metro area.Valley Prestress prides itself on a philosophy of innovation and regularly opens its plants for the purpose of educatingother precasters as well as universities and departments of transportation.

Valley Prestress is heavily involved in precast prestressed concrete research having completed numerous research studieswith University of Texas, Texas A&M, University of Houston and others. Research and development leading to the advancement of concrete mixtures, fabrication techniques and bridge design keep Valley at the forefront of precast prestress transportation products. Valley Prestress was the first TxDOT approved precaster to be allowed use of Self Consolidating Concrete (SCC) in all of its products at all of its plants. Additiionally, Valley participates with numerous industry groups including PCMA of Texas, Precast Prestressed Concrete Institute (PCI) and Associated General Contractors (AGC).

Valley Prestress Products

PO Box 309

Eagle Lake, TX 77434


David Malaer 979.234.7899

PCMA Alternate Rep: Brian Malaer

HIGHWAYS/BRIDGES

Deck Slabs/Bax Girders

AASHTO I Beams


ValleyPRESTRESSValley Prestress Products, Inc.

TxDot Approved

PCMA • 23

Announcing PCI’s

Webinar Series

Earn CE credits at our

free one-hour webinars.

PCI webinars are free, one-hour long, and

provide a noon start time in each time zone

in the contiguous United States. PCI is a

registered continuing education provider

with AIA, NCEES, and USGBC, and offers

continuing education credit accepted in

all 50 states. Mark your calendar and

join us for our upcoming webinars.

Check our webinar webpage for dates

and more information.

Visit www.pci.org/webinars formore information and to register.

Suite 2100 I Chicago, IL 60606-5230P

Chicago, IL 60606

P


60606

P


60606

P

I Fax: 312-621-1114 I www.pci.org

2

I Fax: 312-621-1114 I www.pci.org

2

200 West Adams Street I Suite 2100 I Chicago, IL 60606-5230Phone: 312-786-0300 I Fax: 312-621-1114 I www.pci.org

2

Precast/Prestressed Concrete Institute

CONTINU

I NG E D U C A T I O

N

PCMA • 24

PCMA ASSOCIATE MEMBERS

BR ARCHITECTS, INC. www.brarchitects.com

2007 N. Collins Blvd., Suite 507Richardson, TX 75080

Representative: Bradford Russell, AIA, P.E.Architect / Structural Engineer / LEED APDirector of Architecture / EngineeringPh: 972-235-9308Fx: 972-235-9388

Architects & Structural Engineers

ALAMO CEMENT COMPANYPO Box 34807San Antonio, TX 78265800-292-5510210-208-1880

Representatives: Ed Broach [email protected] Williams [email protected] Kidder [email protected]

BASF CONSTRUCTION CHEMICALS LLC www.basf.com/usa

7104 Wright Road Houston, TX 77041

Representatives: Dave Martin, [email protected] Harry Tormey, [email protected], 281-703-6110 Joel Tucker, [email protected], 713-213-0337 Mark Sinicrope, [email protected] 512-461-8212

BASF Construction Chemicals LLC includes the MasterBuilders line of chemical admixtures for concrete.

BORAL MATERIAL TECHNOLOGIES, INCwww.boralmti.com

Corporate Office:45 Northeast Loop 410, Suite 700San Antonio, Texas 78216800-964-0951 Email: [email protected]

Full Line of Utility and Engineering Services.Your Source for Fly Ash and Coal Combustion Products.

ATHANOR STEELwww.athanorsteel.com

2550 Gray Falls Drive, Suite 216Houston, Texas 77077281-741-1265

Representatives: Patrick Gregoire, CEOCarine Lion, VP

Engineering: Mill supportedCoverage: Domestic PLI

Athanor Steel - A416 5/16", 3/8", 1/2",1/2” OVERSIZED,0.6" 270k and 300k black and galvanized, A4215/7/9mm & A881 5/7/9mm Type A - Type B

PCMA of Texas Appreciates our AssociateMembers for their experience, knowledgeand commitment to the precast prestressedconcrete industry.

They are our Partners and their products helpbring designs to life. Please support themwhen you can.

1ST ON-SITE SERVICE, LLC4401 Hickory Tree RoadBalch Springs, Texas 75180Ph: [email protected]

Representatives: Alan ThompsonChuck Wehring

Rubber Tire Gantry Cranes

1st ON-SITE

PCMA • 25

CAM EQUIPMENT SALESCONCRETE ACCESSORY MFG.www.camsales.com

PO Box 603Ludington, MI 494311-800-338-0715 (231-845-0547)

Representative: Jim Wright [email protected]

CAM manufactures concrete reinforcement accessories,and is the US representative for BFS/Casagrande, MBKCage welders for beams, columns and pilings, IMER/ORU mixing/batching and EuroBend Wire and Rebar equipment.


CAPITOL AGGREGATES, INC.www.capitolaggregates.com

12625 Wetmore Road, Suite 301San Antonio, TX 78247210-871-6100

Representative: David Brodhacker [email protected] and Engineering: David Brodhacker [email protected] Service: Rusty Winters [email protected] Darnell, [email protected]

Capitol Aggregates, Inc. products: Portland cement,masonry cement, oil well cement, crushed limestoneproducts, sand and gravel materials.

CHRYSO INC.www.chrysoinc.com

PO Box 190Rockwall, TX 75087-0190800-936-7553

Representatives: Lew Cook [email protected] Terry [email protected]

For over 60 years Chryso® has developed, manufacturedand serviced innovative admixtures solutions based on the needs of leading precast producers around the world.

CONAC www.conacweb.com

4475 River Green Parkway, #100Duluth GA 30096800-336-2598

Representatives: Mike Azarin, President/OwnerTauna Prince, Regional Sales Manager702-755-0999, [email protected]

Lifting Anchors - DR Anchor (dogbone style), FEA erectionanchor), coils, ferrule connectors, insulated wall panel system,plastic rebar/mesh Spacers and miscellaneous accessories.

Associate Products: Anchors & Accessories, Chairs and Spacers,Concrete Accessories, Connection Devices, Embeds, Inserts,Lifting Systems and Accessories, Magnets, Plastic Shims,Rebar Accessories.

CONCRETE REINFORCING PRODUCTSwww.CRPSteel.com

1381 Sawgrass Corporate ParkwaySunrise, FL 33323Ph: 954-561-3607

Representatives: Joanne JacobsJames Perdiue

Our expansive, on-the-ground inventory allows for same-day fulfillment on most orders from our many nationwide locations.With a focus on rebar and PC strand and including tubular and long products, we areamong the largest independent wholesalesteel distributors in the country.

PCMA • 26


CRESSET CHEMICAL COMPANYwww.Cresset.com

One Cresset Center, Box 367Weston, OH 43569800-367-2020 or 419-669-2041

Representative: Mike Baty, [email protected]

Cresset manufactures environmentally friendly chemicalproducts developed for the concrete construction industry. Products include form release agents, curingcompounds, concrete sealers, industrial hand cleaners,form treatments, and spray application equipment.

CUSTOM ROCK FORMLINERwww.customrock.com

2020 West Seventh StreetSaint Paul, MN 55116651-699-1345

Representatives: John Fallenstein, CEO; [email protected] Kluck; [email protected]

Manufacturer of Urethane Formliner

customrockFORMLINER

GERDAU AMERISTEEL WELDED WIRE REINFORCING DIVISIONwww.gerdauameristeel.com

220 Avenue ABeaumont, TX 77701800-365-MESH (6374)

Gerdau is the leading company in the productionof long steel in the Americas and one of the majorsuppliers of specialty long steel in the world.

EUCLID CHEMICAL www.euclidchemical.com

19215 Redwood RoadCleveland, Ohio 44110

Representative: Ruben [email protected]

The Euclid Chemical Company is a leading supplier ofa wide range of quality construction products andchemical admixtures to the precast concrete industry.

GOSCO EQUIPMENT INC.www.gosco.us

5720 Hogue, Houston TX 77087Ph: 713-643-1964Fx: 713-643-6283

PCMA Representative: Randy Goshorn832-435-0365PCMA Alternate Representative: Russel Goshorn713-643-1964

Gosco is a concrete accessories company. We carrychemicals (form release, epoxy, and cures), inserts,lifters, hand & specialty tools, and many more Items.

CONSULTING ENGINEERS GROUP (CEG)www.cegengineers.com

16302 Pleasantville Road, Suite 100San Antonio, TX 210-637-0977

Representatives:Larbi Sennour, PE, SE – [email protected] Arthur, PE, SE – [email protected] Nasser, PE – [email protected]

CEG is the leading precast concrete engineers andconsultants in the US with 50 years of experienceand growing.

PCMA • 27


GRACE, W.R., & CO.GRACE CONSTUCTION PRODUCTSwww.graceconstruction.com

11613 Prince Andrew CourtMontgomery, TX 77316

Representatives: Brad Nelson, [email protected] Miller, 817-287-1222

Grace Construction Products offers a wide range of innovative specialty construction chemicals and materials that includes: concrete admixtures andfibers, products for architectural concrete, cement processing additives, concrete masonry products, air and vapor barriers, roofing underlayments, self-adhered window, door and deck flashings, structural waterproofing systems and fire protection products.

HAMILTON FORM COMPANY, LTDwww.hamiltonform.com

7009 MidwayFort Worth, TX 76118Ph: 817-590-2111

Representatives: Bill Daily, [email protected] Mansel, [email protected] Representative: Marianne Methven, [email protected]

Hamilton Form fabricates custom steel forms, self-stressing architectural tables, stressing equipment,form cleaning machines, embed and beveled plates,steel and magnetic chamfer, vibrators, magnets,screeds, blankets, tarps, utility machines and blanketrollers for precast/prestressed concrete production.

HEADWATERS RESOURCES, INCwww.headwaters.com

2460 Smithers Lake Rd.Thompsons, TX, 77481281-343-0077

Representative: Bob [email protected]

Concrete MaterialsClass “F” and Class “C” Fly Ash

HELSER INDUSTRIESwww.helser.com

10750 SW Tualatlin RoadPO Box 1569 Tualatin, OR 97062503-692-6909

Representative: Max Helser

For over 58 years Helser has engineered and manufactured precise custom steel forms to meet the unique requirements of their customers.Helser’s expertise was utilized in the constructionof the Las Vegas monorail. Whether your projectrequires precise architectural detail, structural elements or transportation application, Helser Industries is on track to get it done right and get it done on time!

INSTEEL WIRE PRODUCTSwww.insteel.com

1510 Carter StreetMount Airy, NC 27030336-403-8602

Representatives: Tammy Hiatt,[email protected] Plit, [email protected]

Manufacture of Prestressing Strand and Structural Mesh.

HOUSTON FOAM PLASTICSwww.houstonfoam.com

2019 Brooks StreetP.O. Box 1615Houston, TX 77251-1615(800)231-1752

Representative: Scott Jones

HFP has been serving the Construction and Packagingmarkets since 1970. We produce expanded polystyrene(EPS) concrete accessory products including: void filler,geofoam, knock outs/block outs, bedding strips, slabinsulation, joint filler, and architectural profiles. As a Dow Chemical Top 25 Inner Circle Partner with a Master Distributorship in North America, HFP stocksa wide range of commercial


JVIwww.jvi-inc.com

JVI Headquarters7131 North Ridgeway Lincolnwood, IL 60712847-675-1560800-742-8127

Southeast Sales Mgr: Billy Jolly864-439-1677 or [email protected]

EMI/RFI Shielding Gaskets, BeCu Gaskets, Conductive Elastomers Fingerstock and Vent Panel Gaskets

MI-JACK PRODUCTSwww.mi-jack.com

15222 McLead DriveMesquite, TX 75149-4502

Representative:Brian [email protected]

Mi-Jack Products, Inc. is recognized as an industry leader and innovator in Travelift® and Translift®rubber tire gantry crane manufacturing, sales, service and support.

OKLAHOMA STEEL & WIREwww.okbrandwire.com

PO Box 220Madill,OK 73446800-654-4164

Representative:Dave Blackwell [email protected]

Manufactures of welded wire fabric for all your precast needs.

PHILLIPS CONSULTING AND MARKETINGRepresentative: Joe Phillips [email protected]

Bringing 25+ years precast/prestressed concrete design, sales, and manufacturing plus 40+ years project management experience in transportation, industrial, commercial concrete construction to help solve your problems.

MEADOW BURKEwww.meadowburke.com

Representatives:Larry Vines, 214-533-1121Greg Arnett, 205-492-0711

Meadow Burke is a leading manufacturer of precast, tilt-up, forming, reinforcing and bridgeconcrete accessories. Our products are sold anddistributed throughout NorthAmerica to helpconnect, form, reinforce and lift concrete.

PCMA • 28

NATIONAL WIRE L.L.C.www.nationalwirellc.com

12262 F.M. 3083Conroe, TX 77301936-760-2040

Representatives:Scott Zwahr, [email protected] Zapata, [email protected] Valentine, [email protected]

National Wire is a manufacturer of welded wirereinforcement. We produce a wide variety of itemsfrom industry standard to complete customization..

Shuttleliftwww.shuttlelift.com

49 E Yew St.Sturgeon Bay, WI 54235Ph: 920.743.8650Fx: 830.743.1522

Representatives: Kurt Minten, [email protected] Reinholtz, 920.743.8650 [email protected]

Shuttlelift manufacturers mobile gantry cranesthat provide a quality material handling solutionfor quality concrete products.

C O R P O R A T E D


PRECAST ERECTORS, INC.www.precasterectors.com

P.O. Box 17483500 Valley Vista Dr.Hurst, Texas 76053817-684-9080817-689-6314Representative: [email protected]

Erectors of precast concrete structures.

SEISMIC ENERGY PRODUCTS, L.Pwww.sepbearings.com

518 Progress WayAthens, TX 75751903-675-8571

Representatives: Steve Bate [email protected] Bowman [email protected]

Seismic Energy Products, L.P. (SEP) provides custom fabricated structural bearings for buildings, bridges and infrastructure world wide.

SIKA CORPORATIONusa.sika.com

315 North Ebrite St.Mesquite, Texas 75249

Representatives: Gordon Bryan281-802-0439

Sika is recognized as the global industry leaderin repair and protection. Many years of researchand development has enabled Sika to providesystems to restore and rehabilitate concretestructures that have deteriorated due to corrosion,structural damage, water infiltration, freeze/thaw,and seismic activity.

SPLICE SLEEVE NORTH AMERICA, INC.www.splicesleeve.com38777 West Six Mile Road, Suite 106Livonia, MI 48152 USA

Representative: TOSHI [email protected] or 734-620-8263 (cell)

NMB Splice-Sleeve® has been the most effective Type 2 grouted mechanical rebar splice with morethan 21,000,000 perfect connections worldwide for the last 40 years.

STRUCTURAL ENGINEERING ASSOCIATES, [email protected]

3838 NW Loop 410San Antonio, TX 78229210-735-9202

Representatives: David T. [email protected] A. [email protected]

Structural Engineering Associates, Inc. specializesin structural design of buildings, bridges, pre-stressed-precast concrete products, prestressingbeds, and other miscellaneous structures.

PCMA • 29


TRINITY INDUSTRIESwww.trinityesc.com

Representatives: Eric Reinhart, [email protected] Sinclair, [email protected] LeJeune, 225-627-4255 [email protected]

Trinity Expanded Shale & Clay produces anddistributes rotary-kiln expanded shale (ES&C)lightweight aggregates and has been serving the precast concrete industry for over sixty years.

UNINTECH CONSULTING ENGINEER, INC.www.unintech.com

2431 E. Evans RoadSan Antonio, TX, 78259210-641-6003

Representatives: Brad Aldridge, P.E. [email protected] Hew, P.E. [email protected]

UNINTECH provides precast design and detailing services, structural and civil engineering, and surveying services. UNINTECH strives to provide quality, cost conscious solutions to our customers.

US FORMLINERwww.USFormliner.com

370 Commerce Blvd.Bogart, GA 30622

Representatives:Ray Clark, General [email protected] [email protected]

WIRE MESH CORPORATIONwww.WMC-US.com

18490 Main StreetConroe, TX 77385877-WMC-WIRE (877- 962-9473)678-633-7091

Representatives: Dan [email protected] [email protected]

WMC is a domestic producer of PC Strandand welded wire reinforcing products(mesh), supplying quality products to theprecast prestressed concrete industry.

Precast Concrete Manufacturers’Association of TexasPO Box 310358, New Braunfels, Texas 78131www.PCMATexas.org • 866.944.7262

Makes designing with precast concrete easy.

PCMA Hosts Seminars

PCMA of Texas offers a complete lineup of (PCI) Precast/Prestressed Concrete Institute’s Box Lunch Programmingand published material to make an easy transition to Precast concrete.

Contact us today for more information on Precast Concrete or to schedule a box lunch presentation.

[email protected] • PCMATexas.org • 866.944.7262

PCMA • 30

2016 Membership Directory and Showcase

Documents

Transcript of 2016 Membership Directory and Showcase