2016 ITE CET Prospectus

2018PROSPECTUSCONTINUING EDUCATION & TRAINING

Higher Nitec Nitec ISC

2018

PR

OS

PE

CTU

S C

ON

TINU

ING

ED

UC

ATIO

N &

TRA

ININ

G

Updated 26.09.17INSTITUTE OF TECHNICAL EDUCATION

ITE PROSPECTUS 2018Main Cover: Final Layout358mmW x 250mmH X 8mmS (Open)175mmW x 250mmH (Closed)

All information contained in this Prospectus is correct at the time of publication (1 Feb 18). ITE reserves the right to amend any part of the contents of this Prospectus without prior notice.

Not all the modules listed in this Prospectus are offered at every intake exercise.Applicants may apply only for modules that are advertised for the particular intake.

© Institute of Technical Education

2

Section 1 Introduction ............................................................................................................................................ 5- Our Mission, Vision and Values- About ITE – Educational Excellence in a Global Economy

Section 2 ITE’s New Certificate of Competency Courses for SkillsFuture Series ............................................ 9

Section 3 General Information ............................................................................................................................ 11- ITECETCertificationSystem- ITETrainingSystem- e-Learning- Module Exemption- Academic Regulations- Getting a Place in ITE- Application and Formation of Classes- Entry Requirements for Higher NitecinServices/Higher Nitec in Technology Courses- Entry Requirements for NitecinServices/NitecinTechnology/ISC Courses- Fees- TrainingSupport- Progression Opportunities- Bridging Programme for Admission to Polytechnics- Bridging Programme for Admission to ITE Technical Engineer Diploma

Section 4 Higher Nitec in Services Courses ...................................................................................................... 39- Accounting- BankingServices- EventManagement- Hospitality Operations- Human Resource & Administration-InteractiveDesign- Logistics for International Trade - Maritime Business- Performance Production- SpaceDesignTechnology- Visual Merchandising

Higher Nitec in Technology Courses ................................................................................................. 62- Chemical Technology- Civil&StructuralEngineeringDesign- Electrical Engineering- Electronics Engineering- Facility Management- Games Art & Design- GamesProgramming&Development- ITSystems&Networks- Marine & Offshore Technology- Mechanical Engineering- Mechatronics Engineering- Offshore & Marine Engineering Design- SecuritySystemIntegration

Section 5 Nitec in Services Courses ................................................................................................................... 90- Beauty & Wellness- BusinessServices- Digital Animation- Pastry & Baking- RetailServices- SpaceDesign(Interior&Exhibition)- Travel&TourismServices- Visual Communication

CONTENTS

3

Nitec in Technology Courses ............................................................................................................ 107- Aerospace Machining Technology- AutomotiveTechnology(HeavyVehicles)- AutomotiveTechnology(LightVehicles)- Chemical Process Technology- ElectricalTechnology(Power&Control)- Electronics,ComputerNetworking&Communications- FacilityTechnology(AirConditioning&Refrigeration)- FacilityTechnology(Mechanical&ElectricalServices)- FacilityTechnology(VerticalTransportation)- Infocomm Technology - Mechanical Technology- Mechatronics- SecurityTechnology- SocialMedia&WebDevelopment

Section 6 ITE Skills Certificate (ISC) Courses ................................................................................................. 135- Electrical Wiring- Gas Tungsten Arc Welding- Residential Air-Conditioning- Residential Plumbing- ShieldedMetalArcWelding

Section 7 Location of ITE Headquarters and Colleges ................................................................................... 141

Section 8 Feedback Form .................................................................................................................................. 143

6

Our Mission

To Create Opportunities for Studentsand Adult Learners to

Acquire Skills, Knowledge andValues for Employability and

Lifelong Learning

Our Vision

A Trailblazer in Career and Technical Education

Our Values

IntegrityTeamworkExcellenceCare

7

ABOUT ITE – EDUCATIONAL EXCELLENCE IN A GLOBAL ECONOMY

ABOUT ITETheInstituteofTechnicalEducation(ITE)isapost-secondaryeducationinstitutionestablishedin 1992 under the Ministry of Education. As a principal provider of career and technicaleducation,andakeydeveloperofnationaloccupationalskillscertificationandstandards,ITE'sMissionistocreateopportunitiesforstudentsandadultlearnerstoacquireskills,knowledgeandvaluesforemployabilityandlifelonglearning.ITE'sVisionistobeATrailblazerinCareerand Technical Education. Our Values are Integrity, Teamwork, Excellence and Care. ITEcomprises the ITE Headquarters and three ITE Colleges – ITE College Central, ITE College East and ITE College West.

SINGAPORE QUALITY AWARD WITH SPECIAL COMMENDATIONInrecognitionofourefforts,wereceivedtheprestigiousSingaporeQualityAwardwithSpecialCommendationin2011,becomingthefirsteducationinstitutioninSingaporetodoso.

TheAwardisafurtheraffirmationofoursuccessfuljourneyoftransformationatITE.Togetherwithourpartners,staffandstudents,wehavetransformedourbrandoftechnicaleducationtoonethatisworld-class,capableofsettingnewglobalbenchmarks.Newcoursesrelevantto the changing world, state-of-the-art learning facilities, and our passion for impartingmarket-relevantskills,knowledgeandvalues,havetransformedthelivesofourstudentsandSingapore’sworkforce.Thisfocushas,inturn,inspiredusinourcontinuingjourneytowardsglobal leadership and excellence in technical education.

The Singapore QualityAward with Special Commendation is a testament to our continualcommitment to organisational excellence, as we work towards becomingA Trailblazer in Career and Technical Education.

LIFELONG LEARNING FOR A GLOBAL ECONOMYAsSingaporeisanopeneconomy,ITE’smandateistomeetthemanpowerneedsandskillrequirementsforSingaporetocompeteinternationally.Todothis,ITEpromoteslifelonglearning,including in-employment learning, for ITE graduates and other adult learners to enhance their employabilityandkeepupwiththedynamicneedsofindustry.

ITEprovidesauniqueHands-On, Minds-On and Hearts-On®educationthroughawiderangeofflexiblecertificationsforpeopleofallskilllevels.Ourcertificationsaimtoofferprofessionaltrainingandupgradingofskillstoequiplearnerswiththerightskillsset,goodknowledgeandpositiveattitude toexcel in their careers.Foremployersandemployees,an ITEeducationisrelevanttorealworldworkrequirementsandisatestamenttoqualityskillsdeliveryinthedynamicworkplace.

PROFESSIONAL ENDORSEMENT OF ITE PROGRAMMESToensurethatourtrainingsyllabusescontinuallymeettheneedsandstandardsofindustry,wehaveinplaceawell-establishedsystemtovalidateeachcoursesyllabus.Withinthesystem,AcademicAdvisory Committees (AACs) are set up to examine and approve syllabuses ofcourses for the respective industries or occupational clusters.TheAACsmeet regularly to

8

discussandreviewthesyllabuses,providefeedbackonchangesinindustry,aswellasprovidespecialist advice on technological trends. EachAAC comprises employer representatives,professionalsandspecialistsfromtherespectiveindustries.

ENRICHING LEARNING ENVIRONMENTITE’sthreeCollegesarecentresofexcellencefortotaleducation.AllCollegespromotemulti-disciplinaryandcross-level learning.As theCollegescapitaliseon their strengths, theywillspecialiseinanddeveloptheirownnicheareas.

Tohelpstudentslearnbetter,eachITECollegeisequippedwithup-to-dateeducationalandmulti-media facilities. Practical lessons are conducted in authentic learning environmentswhich includemodern,well-equippedworkshops, laboratoriesandstudios.Theorysessionsare conducted in lecture and tutorial rooms, which are equipped with computers and acomprehensiverangeofteachingaids.ITECollegesalsohaveawiderangeofothersportingfacilitieslikegymnasiumsandlearningfacilitieslikelibraries.EachCollegeisdesignedwithaholisticenvironmenttomaximiseeverystudent’spotential.

COMPETENT AND CARING LECTURERSAspartofprovidinggoodqualitytechnicaltraining,webelieveinhavingcompetentstaffwhoareeffectiveanddedicatedtotheirprofession.Ourlecturersarequalifiedprofessionalswhoareequippedwithboththetechnicalexpertiseandthepedagogicknow-how.Throughenhancedopportunitiesforcareergrowthandcapabilitydevelopment,wedevelopourstaffandnurturethemamidstacultureofinnovationandexcellence.

Apartfromstaffdevelopmentprogrammesforlecturerstoupdateandupgradetheirskillsandknowledge,weencourageCollege-wideconnectivityforcollaborativeteachingandlearning.Inaddition,lecturersundergoindustryattachmentsatregularintervalstokeepintouchwithdevelopmentsandchangesinindustryandattheworkplace.

9

ITE’S NEW CERTIFICATE OF COMPETENCY COURSES FOR SKILLSFUTURE SERIES About CoC Courses & SkillsFuture SeriesTheCertificateofCompetency(CoC)isanewformalITEcertificatetocatertoworkingadultsseekingshort,industry-relevanttrainingforcareerprogression/transitionortokeepabreastofnewskillsets.

The CoC will be awarded to courses offered under the national SkillsFuture Series. TheSkillsFutureSeriescomprisesaseriesofshortandmodularcoursesfocusingoneightemergingareas - Cybersecurity, DataAnalytics, Entrepreneurship, Finance, Tech-Enabled Services,DigitalMedia,AdvancedManufacturing,andUrbanSolutions.

ITEandtheSingaporeInstituteofTechnologyareboththeleadtrainingprovidersforUrban Solutions.ITEwillalsoofferrelevantCoCcoursesinsupportoftheothersectors.

DurationThe duration of CoC courses ranges from 20 to 60 hours, including assessment.

Entry RequirementIn general, there is no entry requirement for CoC courses. In some cases, applicants may be advisedtopossesspre-requisiteworkknowledgeorexperienceinrelevantareas.

Award of CertificateTheCoCwillbeawardedtocourseparticipantswhohaveattainedatleast75%attendanceand passed the assessment.

Funding and SubsidySingapore Citizens / Singapore Permanent Residents (SC/SPRs) are eligible for trainingsubsidyof70%ofthecoursefee.Thefollowingenhancedfundingschemesalsoapply:- Mid-CareerEnhancedSubsidy(MCES)scheme:90%coursefeesubsidyforSCsaged40

andabove;and- WorkfareTrainingSupport(WTS)scheme:95%coursefeesubsidyforSCsaged35and

above,andearning$2000orlesspermonth

SC/SPRswhorepeatacourseandforeignerswithvalidworkpasswillpaythefullfee.

EmployerswhosponsorworkersfortrainingunderMCESorWTSwillenjoyenhancedcoursefee and absentee payroll funding. Theymay submit their claims to SkillsFuture Singapore(SSG)viatheirSkillsConnectaccount.

IntakeThereare4intakesyearlyinJanuary,April,JulyandOctober.SelectedCoCcourseswillbeoffered at each intake.

10

CoC Courses for Urban SolutionsUrbanSolutionscomprisesasuiteofsolutionswhichisaimedatimprovingthequalityoflifethroughbuildingsustainableandliveablecities.Itextendstothedevelopment,implementationand maintenance of intelligent transport systems, system engineering, sustainable built environmentandadoptionofcleanenergysolutionsandmore.

ITEwillbeofferinganincreasingrangeofCoCcoursescateringto2integralaspectsofUrbanSolutionsinUrban Transport and Urban Living.

Urban TransportCoCinHumanFactorinAviationMaintenanceCoCinIntroductiontoAvionicsWorkshopOperationsCoC in Introduction to Marine Diesel EnginesCoCinIntroductiontoRapidTransitElectricalSystemCoCinQualityAssurance&ControlforMarineIndustriesCoCinRapidTransitElectricalControlSystemCoCinRapidTransitPowerSystemCoCinVTOLAircraft(Drone)Repair,Operation&Maintenance

Urban LivingCoC in Architectural DetailingCoCinArchitecturalDrawings&TechniquesCoC in Basic Lift InstallerCoCinBuildingDrawings&SubmissionCoCinBuildingInformationModelling(Basic)CoCinBuildingInformationModelling(Intermediate)CoCinComputerNetworking-Switching&RoutingCoCinCyberSecurityFundamentalsCoCinDigitalSpaceVisualization(Architecture)CoCinDigitalSpaceVisualization(Interior)CoC in Electrical Principles and InstallationsCoCinElectricalSwitchboardTesting&MaintenanceCoCinIntelligentBuildingControlSystemCoC in Interior ApplicationsCoC in Interior ConstructionCoC in Intrusion & Access Control Technology - Workplace ProtectionCoCinLiftSystem&EquipmentMaintenanceCoC in Plumbing MaintenanceCoCinSmartHomeSystemsCoCinSmartLivingSolution-HomeProtectionCoCinSurveillanceTechnology-WorkplaceProtection

CoC Courses for Advanced ManufacturingCoC in Cloud Computing Essentials CoC in Data Visualisation Fundamentals CoC in Practical Robotics

Coursedetailsareavailableathttps://www.ite.edu.sg/wps/portal/pts.

12

ITE CET CERTIFICATION SYSTEMTheITECETCertificationSystemcomprisesfivecertificationsasfollows:

• Specialist Nitec for training courses that require Higher Nitec/Nitec in Services/Technology or Higher Nitec/Nitecqualificationsasanentryrequirement;

• Higher National ITE Certificate (Higher Nitec) in Services/Technology for trainingcoursesthatrequireGCE‘O’withpre-requisitesasanentryrequirement;

• National ITE Certificate (Nitec)inServices/Technologyfortrainingcoursesthatrequire

completionofGCE‘N’orGCE‘O’asanentryrequirement;and

• ITE Skills Certificate (ISC) for training courses that require completion of primary educationasanentryrequirement;and

• ITE Certificate of Competency (CoC)forbite-sizedtrainingcoursesthatdonotrequireformalqualificationforadmission.

13

ITE TRAINING SYSTEM SEMESTER-BASED CREDIT TRAINING SYSTEM FOR CET COURSESCETcoursesareconductedonaSemester-basedCreditSystemofTraining(SCT).InSCT,coursesarestructuredandofferedasindividualmoduleswherecreditsareassignedtoeachmodule,basedontraininghoursandeffort.Amoduleisaself-containedunitofstudy,coveringselectedtopicsofasubjectarea.Dependingonthedemand,notallthemodulesintheCETcourseswillbeofferedineachintake.Wherethemodulesareofferedandthereisinsufficientenrolment,theclasseswillbecancelledandafullrefundwillbegiventotheaffectedstudents.

A student can enroll for the modules according to his training needs. Each module is to be completedwithina6-monthterm.

ASSESSMENT AND EXAMINATIONSAssessmentforeachmodulewillbebasedonthefollowingmodes:

• In-Course assessment• End-of-Module examination

Generally,thepassmarkforeachmoduleis50%(orothermarksasdeterminedbythecourse)andisbasedontheweightedaggregatescoreofthein-courseassessmentsandend-of-moduleexamination.Theweightageforin-courseassessmentsandend-of-moduleexaminationvariesfor each module.

IN-COURSE ASSESSMENTIn-courseassessmentsareintendedtogiverecognitiontothecontinuouslearningofstudentsin studying the module. In-course assessments encompass different modes of assessments suchasclass test,writtenassignment,phase test,practicalassignment, roleplay,portfolioassignment,projectandoralpresentation.Thenumberofin-courseassessmentsvariesfromcoursetocourseandmaybecompletedindividuallyoringroups.

Besideshavingtoattainaminimumscoretopassthemoduleasdeterminedbythecourse,students are also required to pass all critical skills stipulated for the module.

END-OF-MODULE EXAMINATIONEnd-of-moduleexaminationisasummativetestingofcompetenciescoveredinthemodule.Itistoassesshowwellstudentscanintegratethevariouscompetenciesandknowledgeacquiredin the module.

MINIMUM ATTENDANCE RATEStudentsmustachieveaminimumof80%moduleattendanceratetobeeligibletositfortheend-of-moduleexamination.Studentswhodidnotsatisfythemoduleattendanceratewillbedebarredforthemoduleanddeemedtohavefailedthemodule.

CREDITSWhenstudentspassedamodule,theywillearncreditsofthemodule.

14

GRADE POINT AVERAGETheGradePointAverage(GPA)representsastudent’scurrentstandinginthecourseofstudy.Itistheratioofthetotalgradepointsearnedtothetotalcreditsattemptedtodate.ThefinalGPAscoreatthepointofgraduationdeterminestheoverallperformanceofthestudentinthecourse of study.

GRADING SYSTEMPerformanceinamodulewillbegradedinoneofthefollowinggradingsystems:

Grade Grade Scale DescriptionDistinction 4 Distinction

A 4 ExcellentB 3 Very GoodC 2 GoodD 1 PassF 0 Fail

Grade Grade Scale DescriptionDS NotApplicable DistinctionP NotApplicable PassF NotApplicable Fail

IF YOU FAIL A MODULEStudentswhofailamodulewillberequiredtorepeatthemodule.Studentsarenotallowedtorepeatthemodulethattheyhavepassedtogetabettergrade. Studentsarealloweduptothe14thweek*ofcoursestartdatetowithdrawfromthemoduletheyenrolled.Thereafter,studentswhodonotcompletethemodulewillbedeemedashavingattemptedandfailedthemodule.ThisfailedmodulewillbeaccountedintheGPA.

RELEASE OF EXAMINATION RESULTSThe date of the release of examination results is posted on the ITE Home Page at the end ofeachterm.StudentscanviewtheirexaminationresultsviaITEStudentPortalorSMS(ifstudentshavesubscribedforSMSservices)fromthedateofthereleaseofexaminationresults.

AStatementofResultswillalsobeissuedtothestudents.TheStatementofResultsshowsthegradesandcreditsearnedinallthemodulesthatthestudentshavetakeninthatterm,aswellastheircurrentandcumulativeGPA.

CERTIFICATIONAModuleCertificateforaHigher NitecinServices/TechnologyorNitecinServices/Technologycourseofstudywillbeawarded for themodule(s) thatastudentpassed inanexaminationseries.Studentswhomeetthecertificationrequirementsofcourseofstudyinthesamemodeoftrainingwithin6yearsfromthefirstexamination,maybeawardedtheHigher NitecinServices/Technology or NitecinServices/TechnologyorISCfullcertificateandanacademictranscript.

StudentsshouldseekadvicefromtheDepartmentoftheCollegeofferingtheCETcourse,onthemodulesthatneedtobecompleted,toqualifyforafullcertificate.

*ExcludesITEvacationweeks

15

APPLICATION FOR CERTIFIED STATEMENT, STATEMENT OF RESULTS OR ACADEMIC TRANSCRIPTStudentsmayapplyforaCertifiedStatement(noreplacementoforiginalcertificate)oracopyoftheStatementofResultsorAcademicTranscriptusingtheprescribedapplicationformwithpaymentof$10pertypeofstatementrequested,atITECustomer&VisitorCentre.

COLLECTION OF CERTIFICATESGraduatesandstudentswillbeinformedintheStatementofResultstocollecttheircertificatefromtheAdministrationOffice/Customer&VisitorCentreoftheircollegeofstudyduringofficehoursorat theCollegeGraduationCeremonyasadvisedby theirCollege.Certificatesnotcollectedwithin 1 year from the date of issue,will be destroyed andwill not be re-issued.PleaserefertoITEWebsiteforthetelephonenumbersandofficehoursoftheAdministrationOffice/Customer&VisitorCentre. Ifgraduatesorstudentsareunable tocollect theircertificatepersonally, theycanauthoriseanotherpersontocollectthecertificateontheirbehalf.Duringthecollection,theauthorisedperson (Proxy) needs to produce anAuthorisation form signed by the graduate/student, aphotocopy of graduate/student’s NRIC/Employment Pass/Work Permit and a photocopy ofProxy’sNRIC/EmploymentPass/WorkPermit.Theauthorisedperson(Proxy)isalsorequiredtoshowhis/heroriginalNRIC/EmploymentPass/WorkPermit.

CERTIFICATE OF MERITCertificateofMerit(COM)isgenerallyawardedtothetop5%ofthegraduatesfromacourse.Graduatesmusthavepassedallmodulesatthefirstattemptwithinnormalcoursedurationandhaveachievedoutstandingperformanceintheircourseofstudy,withacumulativeGPAof3.5orabove,atthepointofgraduation.

COURSE MEDALTheCourseMedalsareawardedtotheoutstandingCOMholdersineachcourse.ThenumberofCourseMedalsawardedforeachcourseisbasedonthenumberofgraduatesofthecourse,subjecttoamaximumof3medalspercourse.

Graduates will be awarded Gold, Silver or Bronze Course Medal, based on their overallperformance in their course of study and other contributions.

TOP GRADUATE AWARDCET graduate with outstanding performance and displayed exemplary qualities of lifelonglearningandupgradingefforts,willbeconsideredforoneoftheTopGraduateAwards.

16

e-LEARNING e-LEARNING AND ITS BENEFITSe-Learningaimstoenablestudents tohavemoreflexibility in ‘when’and ‘where’ they learnthrough the use of technology.Studentsmay also participate in learning activities such asgroupdiscussions,attemptonline testsandquizzes tocheck theirprogressor reviewwhattheyhavelearned. Under e-Learning, the Theory hours will be scheduled into face-to-face and self-directedlearning(SDL)sessions.

• During the face-to-face sessions, the lecturer will be present in class to guide thestudents’learning.

• DuringtheSDLsessions,studentswillaccessonlinematerialsontheirownusingITE’smyConnexionsystemandanyotherlearningresourcesprovidedbythelecturer.Therewillbenoclassroomlessons.Studentsmayemailtheirlecturersiftheyneedhelp.

Toextendthebenefitsofe-learningtostudents,SDLsessionsareincorporatedforallHigher Nitec and Nitec modules.

REQUIREMENTS OF e-LEARNING Studentsneed tohave Internetaccess inorder toaccessmyConnexion. IfstudentsdonothaveaccesstotheInternet,self-accessroomswouldbemadeavailableattheCollege.Yourlecturerwillinformyouoftheschedulewhenthetermstarts.

ATTENDANCE COMPUTATIONSDLhoursareincludedinthetotalattendancehourstodeterminestudents’eligibilitytositfortheend-of-moduleexamination.However,SDLhoursarenotclaimableunderSSG’sAbsenteePayroll funding.

ACCESS TO WI-FI SERVICE StudentsmayaccessWi-FiservicewhileonITEcampus.TologintotheWi-Fiservice,simplygotoyourITEStudentPortalaccountathttps://myportal.ite.edu.sg and click on "myEmail" to obtainyourloginIDandpassword.

17

MODULE EXEMPTION Studentscanapplyforexemptionfromoneormoremodulesinacourseofstudy,basedontheirrelevantpriorlearningacquiredfromITEorotherrecognisedinstitutions.

MODULE EXEMPTION BASED ON NON-ITE CERTIFICATIONS Thenumberofmodulestobegrantedexemptionbasedonrelevantpriorlearningacquiredfromotherrecognisedinstitutions,shallnotexceed50%ofthetotalcreditsrequiredforcertificationofthecourse.Forexample,foracoursethatrequires72creditsforcertification,maximummoduleexemption(s)willnotexceed36credits.

ForWSQholders,thenumberofmoduleexemption(s)grantedshallnotexceed75%ofthetotalcreditsrequiredforcertificationofthecourse.

EVALUATION CRITERIA Applicantswillneedtoproduceevidenceoftheirpriorlearning.Applicationswillbeevaluatedbasedon:

• Certifiedlearningacquiredisstillrelevantandcurrent;

• Relevantworkexperienceacquiredfromlocalcompanies,ifany;and

• Aone-offpracticaltesttobetakenbyapplicants,ifdeemednecessaryatthediscretionof ITE.

APPLICATION RULES Tobeeligibletoapplyformoduleexemption,applicantsmustobservethefollowingrules:

• ApplicantsaretoapplyformoduleexemptionafterregisteringforaCETcourseofstudyand beforethecoursestarts.Youwillnotbeabletoapplyformoduleexemptionafterthecourse has begun.

• Applicants should not apply for the same module exemption at different colleges.Unsuccessfulapplicantsmayre-applyforexemptionforthesamemodule,iftheyhaveacquiredadditionalrelevantlearningand/orqualification(s)duringthecourseofstudy.

HOW TO APPLY?Application formodule exemptionmust be submitted to the applicants’Customer&VisitorCentre, beforethestartofthemoduletraining.Takethefollowingsteps:

• Downloadtheapplicationformfromwww.ite.edu.sg/wps/portal/pts.hn.admission(Higher Nitec)orwww.ite.edu.sg/wps/portal/pts.ni.admission(Nitec / ISC)orobtainasetfromthe Customer & Visitor Centre of their college of study.

• Submit completed application form to applicants’ college of study, with supportingdocumentsasfollow:

- Certifiedtruecopiesofrelevantcertificates.Certificatesissuedbyforeigninstitutionsmustbeendorsedbytherelevantembassies;

- Detailedresults;

18

- Relevantsyllabus(es)withbreakdownofcurriculumdurationfortheorylessonsandpracticaltraining;

- Typeandmodeofassessmentofthecertifiedlearning;- Pre-requisite(s)forthecertifiedlearning,ifany;and- Relevantlocalworkexperience,ifany,andendorsedbyemployer(s).

All supporting documents must be in English. Documents in other languages will not beconsideredintheevaluation.

• Pay a non-refundable evaluation fee of $50 permodule at the point of submission.Payment may be made by cheque, made payable to “Institute of Technical Education” or usingNETSorcreditcard.

• Whererequiredintheevaluationprocess,applicantsmayhaveto:- Attendaninterview;and/or- Take a practical test of 1 to 2-hour duration for a module applied. An additional test

feeof$70permodulehastobepaidonthedayofthetest,andthereceiptproducedbefore taking the test.

Failuretoturnupfortheintervieworthepracticaltest,whichwillbeconductedduringofficehours,ormakepaymentforthepracticaltest,willrendertheapplicationvoidandinvalid.

NOTIFICATION OF RESULTS Applicantswillbenotifiedoftheoutcomeoftheirapplicationbypostwithinonemonthfromdate of application for module exemption.

MODULE FEE PAYABLE BY SUCCESSFUL APPLICANTS Successfulapplicantscanapplyforarefundofmodulefeeiftheyhaveenrolledinthemoduleforwhichexemptionisgiven.TherefundapplicationissubjecttoITE’sprevailingrefundpolicy.

MODULE EXEMPTION/MODULE TRANSFER BASED ON ITE CERTIFICATIONS StudentswhocompletedsomemodulesfromtheirpreviousITEcourseunderothermodesofITEtraining(Full-timeorTraineeship),mayapplytocontinuetheiroutstandingmodulesinarelatedcourseunderCETandgraduatewithaCETCertificate.Toqualify,applicantsmustbeat least 18 years old, and haveaccumulatedatleastoneyearofworkexperience. They must completetheCETcoursewithina6-yeartimeframefromthedateoffirstexaminationtaken.

19

ACADEMIC REGULATIONSEXAMINATION REGULATIONSAllstudentstakingexaminationsoftheInstituteofTechnicalEducation(ITE)mustcomplywiththefollowingrules.Studentswhofailtoobserveanyoftheserulesmaybedisqualifiedfromthe examinations.

Examination ScheduleStudents are responsible for presenting themselves for examination on the date and timeshown in theexaminationschedule,and reportat least20minutesbefore theexaminationtime.

Before Start of the ExaminationOnlystudentswhohaveregisteredfortheexaminations,arepermittedtoentertheexaminationcentre.

Studentsmust bring with them their photo ID (e.g. NRIC,Work or Dependant’s Pass) foridentification. International students whose Employment Pass or Work Pass have expiredbefore the examination, can seek approval from their Section Head to use Passport foridentificationinstead.ThestudentsmuststillwritetheirWorkorDependant’sPassnumberontheanswerscripts.

StudentsaretoplacetheirphotoIDontheirdesksthroughouttheexaminationforverificationbyInvigilators.Iftheidentityofthestudentisindoubt,Invigilatorsmaytakeaphotographofthestudentforseparateverification.

Studentsshallbeliabletoexpulsionfromtheexaminationcentreiftheiridentificationdocumentsdo not belong to them.

Studentsmustbeproperlyattiredwhentheyappearfortheexamination.Otherwise,theymaybe barred from the examination.

Students in theexaminationcentrearenotallowedtopossessbooks,documents,pictures,notesandanyunauthorisedmaterialsotherthanthoseprovidedbytheexaminationcentre.Electronic and communication devices (e.g. mobile phones, cameras, tablets, smart wristwatches/glasses,andpenswithimagecapturingcapabilities)thatarecapableofdisplayingvisualorverbal informationarealsonotallowed.Anystudent found tobe inpossessionofsuchmaterialsordevices,areconsideredasdishonestandliabletothesamepenaltyasthosedetectedfordishonestyduringexaminations.Ifcommunicationdevicesareleftatthefrontorbackoftheexaminationroom,theymustbeswitchedoff.ITEwillnotberesponsibleforanyloss of personal belongings.

Studentsarenotallowedtoborrowstationeryandmathematical instrumentssuchasrulersand calculators, from other students during examination.

Studentsarepermitted touseonlynon-programmableelectroniccalculators thataresilent.Calculators thatgiveout sound,needexternalpowersupplyor transmit signalsarestrictlyprohibited.Calculatorsmustnotbeusedfortheretrievalofstoragedata,textorinstructionsorfor the graphical representation of functions and data.

20

Students are not allowed to bring instruction manuals, external storage media and otherperipherals into the examination centre.

Studentsarenotpermittedtoeat,drinkorsmokeintheexaminationcentre.

Studentsaregivenabout10minutesbeforethetimescheduledforthestartofexaminationto read thequestionpaper.Studentsmust not startwritinguntil instructed todo soby thePresidingExaminerorInvigilator.

StudentsmustinformthePresidingExaminerorInvigilatorimmediatelyiftheyare: i) Issuedaquestionpapertheyhavenotregisteredfor,ORii) Issuedaquestionpaper thatdoesnotcontain thenumberofpagesspecifiedon the

coverpage,ORiii) Issuedaquestionpapernotscheduledtotakeplaceatthattime,ORiv) Notissuedsupplementarymaterials(e.g.diskettes)indicatedinthequestionpaper.

During the ExaminationNostudentsareallowedtoentertheexaminationcentreafter30minuteshavelapsedfromthescheduled start time of the examination.

Studentsmayleavetheexaminationcentreafter30minuteshavelapsedfromthestartoftheexamination.TheywillnotbeallowedtoreturntotheexaminationcentreunlessanInvigilatororapersonauthorisedby thePresidingExaminerhasaccompanied themwhile theywereaway.

Nostudentsareallowed to leave theexaminationcentreduring the last15minutesof theexamination.

Studentsarenotallowedtoplaceanydocumentsincluding‘InstructionstoStudents’ontheirdesks during the examination.

Studentsmustnot,foranyreason,communicatewithanyotherstudentsduringtheexamination.Students shall not do anything which causes unnecessary distraction to other students.Studentswhoareguiltyofimproperconductormisbehavethemselves,maybeexpelledfromthe examination centre.

AnystudentwhowishestocommunicatewithanInvigilatormustremainseatedandraisehis/her hand.

Studentswillbestoppedfromproceedingfurtherinthepracticaltestiftheycontinuetoadoptanunsafeordangerousmethodofoperationdespitewarning.Anunsafeordangerousmethodofoperationisonewhichmayinjurestudentsorcausedamagetomachinesorequipment.

Students are liable for any damage to machines, tools and equipment arising from theirnegligence.

Students should note that legible handwriting is taken into account in theawardofmarks.Studentsshoulduseblackorblueballpointpenduringtheexaminations.Studentsarealsoreminded to usea soft-leadpencil (e.g. 2B) to shade their answers in theMultipleChoice

21

Answer Sheets.A soft eraser should be used for erasure if studentswish to change theiranswers.ItistheresponsibilityofthestudentstoensurethatanswersarepresentedclearlyintheAnswerSheet/AnswerScriptsformarking.

At the End of the ExaminationStudentsshouldstopwriting/workingimmediatelywheninstructedbythePresidingExaminerorInvigilator.

Studentsshouldremainseatedwhiletheanswerscripts/practicalworksarebeingcollected.Students can leave theexamination centre only after theyhavebeen told to do soby thePresidingExaminerorInvigilator.

Forexaminationswheremorethanonerelayiscarriedout,studentsarenotallowedtoleaveuntiltheendoftheexaminationsunlessotherwiseinstructedbythePresidingExaminer.

Students should not take question paper, used and unused answer booklets or any itemsissuedbytheInvigilatoroutoftheexaminationhall/roomunlessotherwisestated.

DishonestyAstudentisguiltyofdishonestyifhe/shecheatsorattemptstocheat,duringtheexamination.

Studentsfoundguiltyofdishonestywillbegraded‘Fail’andmayfacedisciplinaryaction.

Posting of Examination Material OnlineStudentsarenotallowedtopostanyexamination-relatedcopyrightmaterial(e.g.wholeorpartofquestion(s),questionpaper,answerscript)onanysocialmediaorwebpage.Studentswhoarefounddoingsowillbesubjectedtodisciplinaryaction.

Deferment of ExaminationStudentswhoareunabletositforexaminationbuthaveavalidreason,canseekfordefermenttothenextexaminationseries.StudentsaretosubmittheirrequesttotheirSectionHeadforapprovalbeforethedateofexamination.

Forreasonofabsencethatcannotbeknownbeforehand,studentsmustsubmittheirapplicationswithinthenext two working days from the date of examination. The supporting documents shouldpreferablybetheoriginalcopy.However,incaseswherethesupportingdocumentisrequiredbymorethanoneparty(e.g.morethanonecollege/departmentforexaminationsatdifferentcolleges),aphotocopyofthesupportingdocumentcanbeaccepted.ThephotocopymustbecertifiedastruecopybyITEstaffwhoaredesignatedasLecturersandabove,afteroriginal copy is sighted.

Absence from ExaminationStudentswhoareabsentfromanendofmoduleexaminationwithoutITE’sapproval,willbeconsideredtohavefailedthemodule.

Infectious Diseases and Hospitalised StudentsStudentswhoaresufferingfromanyinfectiousdisease(e.g.chickenpox,SARS,H1N1)arenot allowed to sit for examination in their usual examination centre. Arrangement for a hospitalised candidatetositforexaminationwillbeconsideredonacase-by-casebasis.

22

Major Train Service DisruptionIn the event ofmajor train service disruption, students should stillmake their way to theirexaminationcentres.Studentsmaybeallowedtotakeexaminationswithfulldurationgiveniftheyarrivebeforetheendoftheexaminationandprovidednootherstudentshavelefttheexaminationcentre.Otherwise,studentsmaybeallowedtotakemake-upexaminations.

APPEALS REGULATIONStudentsmayappealtoreviewtheirmoduleresults,iftheyhavereasonstobelievethatthemodulegradeawardedforaparticularmoduleshouldhavebeenbetter.AppealsmustbemadebeforetheclosingdateshownontheITEWebsite.Lateappealswillnotbeentertained.

Appealsmustbemadeonprescribed formswithpaymentofadepositof$20 (inclusiveofGST)permoduleatanyITECustomer&VisitorCentre.Iftheappealresultsinachangeofthemodulegrade,thedepositwillberefunded.

StudentswillbeinformedinwritingofITE’sdecisionontheappeal.ThedecisionofITEfortheappealisfinal.

23

GETTING A PLACE IN ITEAGE CRITERIONApplicants must be at least 18 years old as at 1 January of intake year.

Theofferofan ITEcourse toapplicants is subject to thembeingphysically,medicallyandmentallyfittopursuethecourse.ThisistoensurethatallstudentscanbenefitfromITEtraininginasafeandconduciveenvironment.ApplicantsorstudentsassessedbyITEasbeingunfitcanbewithdrawnfromthecourse.Whereappropriate,theymaybeconsideredforothercoursesif there are suitable ones.

ApplicantswhoarenotSingaporeCitizensorSingaporePermanentResidentsmayapplyforCET programmes offered by ITE.

ACADEMIC QUALIFICATIONApplicantswhodonotmeettheacademicentryrequirementsfortheCETcoursescanupgradetheiracademicqualificationthroughtheGeneralEducation(GE)programme.

The GE ProgrammeoffersawiderangeofsubjectsfromSecondaryOneNormal(Academic)toGCE‘N’andGCE‘O’levels.Generally,classesrunfromMarchtoOctobereachyear,andlessonsareheldonceaweekforeachsubject.

ENTRANCE TESTFor skills courses, applicants can also register and sit for an Entrance Test conducted by ITE at afeeof$10(inclusiveof7%GST).TheEntranceTest(ofabout1hour40minutesduration)isavailableonlineforwalk-inapplicantsatanyITECustomer&VisitorCentre.Thetestresultisknownonthesamedayofthetest.Thereisnoneedtopre-registerforthetest.

FOR MORE INFORMATIONFor more information, please contact any ITE Customer & Visitor Centre.

24

APPLICATION AND FORMATION OF CLASSESCOUNTER APPLICATIONNew applicants who are not Singapore Citizens or Singapore Permanent Residents arerequiredtoregisteroverthecounteratanyITECustomer&VisitorCentre.Applicantsmustproducethefollowingoriginaldocumentsforregistration:

• Applicationform,dulycompleted;• NRIC/WorkPassorDependant’sPass;and• EducationalCertificate,ModuleCertificate,EntranceTestResultSlip(whereapplicable).

Applicants are to pay the course, examination and registration fees upfront at the point of registration.Feesmaybepaidbycheque,creditcard,NETSorPostSecondaryEducationAccount(PSEA).

For cheque payment, the cheque should be crossed and made payable to “Institute of Technical Education”or“ITE”.Applicantsaretowritetheirname,NRIC/FINandcontactnumberattheback of the cheque.

WEB APPLICATIONNewapplicantswhoareSingaporeCitizens/SingaporePermanentResidentsareencouragedtoapplythroughtheWebfromanyInternet-readyPCduringtheadvertisedapplicationperiods.Please refer to the section on “Web Application Guide” for details.

Applicantsarenotallowedtorepeatamoduleinwhichtheyhaveobtainedapassgrade.

VERIFICATION OF DOCUMENTSStudentswhoenrolledintoanITEcourseforthefirsttimeovertheWeb,willberequiredtosubmitdocumentaryproofsofentryqualificationsandcitizenshipduringofficehoursatanyITECustomer&VisitorCentre(CVC)ortheirCollegeofstudyforverificationduringthefollowingperiods:

i) ApplicationperiodatCVCs;orii) Re-applicationperiodatCVCs;oriii) WithintwoweeksaftertermcommencementattheCollege.

Applicantsmaybewithdrawnfromthecourse,iftheyareadmittedonthebasisofanyfalseorinaccurateinformation.Therefundpolicywillapplyforsuchwithdrawal.

HOTLINE FOR TECHNICAL ASSISTANCEShouldyouexperienceanytechnicaldifficultieswhenapplyingonline:• Youmaycallour24-hourITHelpDeskon65902188and68721188.• Alternatively,youmayreportyourtechnicalproblembyemailingtoithelpdesk@ite.edu.sg

withyourname,NRIC/FINandcontactnumber.

25

CUSTOMER SERVICE HOTLINE Forotherformsofassistance,pleasecallourCustomerServiceHotline,1800-2222111duringofficehours(Mon–Fri:8.30amto6pm).

FORMATION OF CLASSESITEmaytransfer,combineorcancelaclasswhenenrolmentislow.Wheremodulesareofferedandthereis insufficientenrolment,classesmaybecancelledandafullrefundwillbegivento the affected students. Please log on to www.ite.edu.sg to check your training schedule one weekbeforetheclasscommencementdate.

26

WEB APPLICATION GUIDE

Go to www.ite.edu.sg.

Are you applying to this programme for the first time?

WEB APPLICATION GUIDE ̂

Search and add available class(es .)

Yes

Start

No

1. Click on “APPLY for ITE Courses” icon 2. Click on “Application for CET Higher Nitec / Nitec / ISC Course” link.

Click on “Apply online”. Click “HERE .”

htriB fo etaD ,CIRN ruoy ni yeK .ssaPgniS esU ro nottub ’’TRATS“ no kcilc dna

Key in your qualification, personal particulars, contact details (address, phone, email address)

.nottub ’’TIMBUS SEY“ no kcilc yllanif dna

.drowssaP dna DI resU ruoy nwod ekaTProceed to enrol in module class(es .)

No

Yes

Click on “iStudent .knil ”

End

Do you have a User ID and

Password?

drowssaP dna DI resU ruoy ni yeK .nottub ”NIGOL“ no kcilc dna

No

Go to https://myportal.ite.edu.sg.

.nottub ”tuO ngiS“ eht kcilC

Yes

Please call any of the following Customer & Visitor Centres to obtain your User ID and Password: ITE HQ Tel: 1800-2222 111 ITE College Central Tel: 6590 2211 ITE College East Tel: 6590 2262 ITE College West Tel: 6590 2628

Are you a Singapore Citizen or SPR?

Class(es) added successfully?

Yes

Apply at ITE

Customer & Visitor Centre

No

Yes

Click on “Enrol” link under .noitceS ”scimedacA“

View Fee Payment Details/Make Payment

Click on “Online Payment” link to view “Account .sutats tnemyap/tnuoma tnemyap fo ”yrammuS

dna drowssaP ,DI resU ruoy ni yeK .nottub ”NIGOL“ no kcilc

Go to https://myportal.ite.edu.sg.

End

Click on “iStudent .knil ”

Upon course registration, fees must be paid in full by the stipulated deadline#.

tnemyaP enilnO roF*

asiV/draCretsaMCredit/Debit Card

(Click on “Make Online Payment” to link you to

payment pages.)

For Payment at ITE Customer & Visitor Centre

Cheque/Credit Card/NETS/PSEA

View Fee Payment Details/Make Payment

^CET Higher Nitec, Nitec and ISC courses are SkillsFuture .sesruoc devorppa tiderC Applicants can apply for CET courses using SkillsFuture Credit at any ITE Customer & Visitor Centre. For details on SkillsFuture Credit, please visit www.skillsfuture.sg/credit. *Online payment will be updated in student’s financial account 3 working days later. #Higher Nitec: Please visit www.ite.edu.sg/wps/portal/pts.hn.admission for actual deadline. Nitec / ISC: Please visit www.ite.edu.sg/wps/portal/pts.ni.admission for actual deadline.

1. Click on “My Class Schedule” to view your class schedule. 2. Print a copy of the Enrolment Confirmation Letter. 3. Click on “View Account/Make Payment” to view payment amount/make online payment.

^CET Higher Nitec, Nitec and ISC courses are SkillsFuture Credit approvedcourses.

Applicants can apply for CET courses using SkillsFuture Credit at any ITECustomer & Visitor Centre. For details on SkillsFuture Credit, please visit www.skillsfuture.sg/credit.

*Onlinepaymentwillbeupdatedinstudent’sfinancialaccount3workingdayslater.#Higher Nitec:Pleasevisitwww.ite.edu.sg/wps/portal/pts.hn.admission for actual deadline.

Nitec / ISC: Please visit www.ite.edu.sg/wps/portal/pts.ni.admission for actual deadline.

27

Note:Nitec /NTC-2graduateswithat leastagrade ‘B’canapply forexemptionofmodules in therelevantHigher Nitec course.Youmayobtaintheapplicationformformoduleexemptionandsubmitthecompletedformtogetherwithacopyof your NitecorNTC-2certificateandfinaltranscript,totheCollegeofferingyourchoiceofcourse.

# Applicantapplyingforthesecoursesmustbefreefromcolourappreciationdeficiency.@ Applicantmustbefreefromcolourappreciationdeficiencyandcriminalrecord.++ Applicantwillberequiredtoattendaninterviewandpassaheightphobiatestforadmission.* Biology / Biotechnology / Chemistry / Combined Science / Engineering Science / Human & Social Biology

/ IntegratedScience / Physical Science / Physics / Science (Chemistry/Biology) / Science (Physics/Biology) /Science(Physics/Chemistry)/Science(Physics/Biology/Chemistry).

** Biology/Biotechnology/Chemistry/CombinedScience/ComputerStudies/Design&Technology/EngineeringScience/FundamentalsofElectronics/Human&SocialBiology/IntegratedScience/PhysicalScience/Physics/ Science (Chemistry/Biology) / Science (Physics/Biology) / Science (Physics/Chemistry) / Science (Physics/Biology/Chemistry).

ENTRY REQUIREMENTS FOR HIGHER NITEC IN SERVICES /HIGHER NITEC IN TECHNOLOGY COURSES

Course Title Entry Requirements

Higher Nitec in Services- Accounting- BankingServices- EventManagement- Human Resource &

Administration- Logistics for International

Trade- Maritime Business

3GCE‘O’LevelGrades:Grade 1-7 in English LanguageGrade 1-8 in Mathematics (ElementaryorAdditional)orPrinciples of AccountsGrade1-7inoneothersubject

Applicants must have sat for Mathematics (Elementary or Additional).

OR

NitecinServicesqualifications(excludingNitecinServices- Digital Animation, Product Design,SpaceDesign,VisualCommunication)

Nitecqualifications[business/servicesskills]

Higher Nitec in Services- Hospitality Operations

3GCE‘O’LevelGrades:Grade 1-7 in English LanguageGrade1-7intwoothersubjects


Higher Nitec in Services- InteractiveDesign#

3GCE‘O’LevelGrades:Grade 1-8 in English LanguageGrade 1-7 in Mathematics (ElementaryorAdditional)orPrinciplesofAccounts;andGrade1-8inoneothersubject


OR

NitecinServices/Technologyqualifications

NitecqualificationsHigher Nitec in Services- Performance Production#++

3GCE‘O’LevelGrades:Grade 1-7 in English LanguageGrade 1-8 Mathematics (ElementaryorAdditional)orPrinciples of AccountsGrade1-7inoneothersubject


28

Course Title Entry Requirements

Higher Nitec in Services-SpaceDesignTechnology#

3GCE‘O’LevelGrades:Grade 1-8 in English LanguageGrade 1-7 in Mathematics (ElementaryorAdditional)Grade1-8inanapprovedsubject**

OR

NitecinServices/Technologyqualifications

NitecqualificationsHigher Nitec in Services- Visual Merchandising#

3GCE‘O’LevelGrades:Grade 1-7 in English LanguageGrade1-8inanytwosubjects


Higher Nitec in Technology- Chemical Technology

3GCE‘O’LevelGrades:Grade 1-8 in English LanguageGrade 1-7 in Mathematics (ElementaryorAdditional)Grade 1-8 in one of the approvedsubjects*

OR

Nitec in Technology qualifications

Nitecqualifications[technicalskills]

Higher Nitec in Technology- Civil&Structural

Engineering Design- Electrical Engineering#

- Electronics Engineering#

- Facility Management#

- Games Art & Design- Games Programming & Development

- ITSystems&Networks- Marine & Offshore

Technology- Mechanical Engineering- Mechatronics Engineering#

- Offshore & Marine Engineering Design

- SecuritySystemIntegration@

3GCE‘O’LevelGrades:Grade 1-8 in English LanguageGrade 1-7 in Mathematics (ElementaryorAdditional)Grade 1-8 in one of the approvedsubjects**

Note:Nitec /NTC-2graduateswithat leastagrade ‘B’canapply forexemptionofmodules in therelevantHigher Nitec course.Youmayobtaintheapplicationformformoduleexemptionandsubmitthecompletedformtogetherwithacopyof your NitecorNTC-2certificateandfinaltranscript,totheCollegeofferingyourchoiceofcourse. # Applicantapplyingforthesecoursesmustbefreefromcolourappreciationdeficiency.@ Applicantmustbefreefromcolourappreciationdeficiencyandcriminalrecord.++ Applicantwillberequiredtoattendaninterviewandpassaheightphobiatestforadmission.* Biology / Biotechnology / Chemistry / Combined Science / Engineering Science / Human & Social Biology

/ IntegratedScience / Physical Science / Physics / Science (Chemistry/Biology) / Science (Physics/Biology) /Science(Physics/Chemistry)/Science(Physics/Biology/Chemistry).

** Biology/Biotechnology/Chemistry/CombinedScience/ComputerStudies/Design&Technology/EngineeringScience/FundamentalsofElectronics/Human&SocialBiology/IntegratedScience/PhysicalScience/Physics/ Science (Chemistry/Biology) / Science (Physics/Biology) / Science (Physics/Chemistry) / Science (Physics/Biology/Chemistry).

29

ENTRY REQUIREMENTS FOR NITEC IN SERVICES / NITEC IN TECHNOLOGY / ISC COURSES

Anapplicantwouldbenefitmorefromthecourseifheisemployedintherelevanttrade.Thespecificentryrequirementsforeachcoursearegivenbelow.

Course Title Entry RequirementsNitec in Services- BusinessServices- Pastry&Baking*##

- Travel&TourismServices- Visual Communication#+

- 2GCE‘O’LevelGrades(Grade1-8)inanytwosubjects OR

- 3GCE‘N’LevelPasses(GradeA-DorGrade1-5)inEnglishLanguageandtwoothersubjects

OR- WorkplaceLiteracy(WPL)Level5inSpeaking

andListening,andLevel4inReading,WritingandNumeracy

Nitec in Services- SpaceDesign(Interior&Exhibition)#+

Nitec in Technology- Electrical Technology (Power&Control)*#

- SocialMedia&WebDevelopment

- 2GCE‘O’LevelGrades(Grade1–8)inanytwosubjects

OR- 3GCE‘N’LevelPasses(GradeA-DorGrade1-5)

inMathematicsandtwoothersubjects OR- WorkplaceLiteracy&Numeracy(WPLN)Level5

inSpeakingandListening,andLevel4inReadingandNumeracy

Nitec in Technology- Chemical Process Technology#

- Aerospace Machining Technology- Electronics,ComputerNetworking&Communications*#

- Infocomm Technology

- 2GCE‘O’LevelGrades(Grade1–8)inanytwosubjects

OR- 3GCE‘N’LevelPasses(GradeA-DorGrade1-5)

inMathematicsorScienceandtwoothersubjects OR- WorkplaceLiteracy&Numeracy(WPLN)Level5

inSpeakingandListening,andLevel4inReadingandNumeracy

* PleaserefertorespectivecourseinformationpageforrelevantISCcertificatesforprogression.# Applicantmustbefreefromcolourappreciationdeficiency.@ Applicantmustbefreefromcolourappreciationdeficiencyandcriminalrecord.## Applicantmustpassaninterviewandmedicalcheck-upforadmission.^ Applicantmustattendaninterviewforadmission.+ Applicantwillberequiredtoattendaninterviewandpassadrawingtestforadmission.

30

Course Title Entry RequirementsNitec in Services- Beauty&Wellness*^- Digital Animation#+

- RetailServices

Nitec in Technology- Mechatronics*#

- SecurityTechnology@

- CompletedGCE‘O’Level OR- CompletedGCE‘N’Level OR- WorkplaceLiteracy&Numeracy(WPLN)Level5inSpeakingandListening,andLevel4inReadingandNumeracy

Nitec in Technology- AutomotiveTechnology(HeavyVehicles)*- AutomotiveTechnology(LightVehicles)*- FacilityTechnology(AirConditioning&Refrigeration)*#

- FacilityTechnology(Mechanical&ElectricalServices)*#

- FacilityTechnology(VerticalTransportation)*#

- MechanicalTechnology*

- CompletedGCE‘O’Level OR- CompletedGCE‘N’Level OR- PassedBESTModule4Mathematics(forthosewithworkexperience)

OR- Accumulated at least 60 hours of structured On-the-JobTrainingundertheCertifiedOn-the-JobTrainingCentre(COJT)system.TheOJTmustberelevanttothe course applied for

OR- WorkplaceLiteracy&Numeracy(WPLN)Level5inSpeakingandListening,andLevel4inReadingandNumeracy

ISC- Electrical Wiring#

- Gas Tungsten Arc Welding- Residential Air-Conditioning#

- Residential Plumbing- ShieldedMetalArcWelding

- Completed primary education OR- PassedBESTModule4inEnglishorMathematics OR- Haveminimum1yearofrelevantworkingexperience OR- WorkplaceLiteracy(WPL)Level4inReadingand

Listening OR- WorkplaceNumeracy(WPN)Level4inNumeracy

* PleaserefertorespectivecourseinformationpageforrelevantISCcertificatesforprogression.# Applicantmustbefreefromcolourappreciationdeficiency.@ Applicantmustbefreefromcolourappreciationdeficiencyandcriminalrecord.## Applicantmustpassaninterviewandmedicalcheck-upforadmission.^ Applicantmustattendaninterviewforadmission.+ Applicantwillberequiredtoattendaninterviewandpassadrawingtestforadmission.

31

FEESAllapplicantsaretopaythetotalfees(inclusiveof7%GST)upfrontatthepointofregistration.

SingaporeCitizensandSingaporePermanentResidentswhorepeatamodulewillneedtopaythefullfeesforarepeatmodule.ThisappliestoSingaporeCitizenandSingaporePermanentResidentstudentswhowithdrawfromamodulefromthecommencementofthetermorfailamodule.

TOTAL FEES PAYABLE PER MODULE (WITH EFFECT FROM 1 APR 2018 TERM)

Course

Total Fees Per Module

SingaporeCitizen(SC)

SingaporePermanent

Resident(SPR)

SC/SPRModuleRepeater* Others

NetFee(AfterSubsidy)

NetFee(AfterSubsidy) Full Fees Full Fees

Higher Nitec $74.00 $455.00 $1,336.00 $1,336.00

Nitec $72.00 $447.00 $1,277.00 $1,277.00

ITE Skills Certificate $63.00 $413.00 $1,173.00 $1,180.00

* Studentwhohascompletedthemodulebefore.

Notes:1) TotalfeespayableincludeTuition,ExaminationandRegistrationFees.2)Feesaresubjecttorevision.3) Fees are charged based on Citizenship at the point of term commencement. Students who have officially

informedITEoftheirCitizenshipchangetoSingaporeCitizenorSingaporePermanentResidentbeforethetermcommencement, will have their fees adjusted to the SingaporeCitizen / Singapore Permanent Resident rateforthatterm.However,forstudentswhoinformITEofficiallyoftheirCitizenshipchangetoSingaporeCitizenorSingaporePermanentResidentafterthetermcommencement,theirfeeswillbeadjustedtotheSingaporeCitizen/SingaporePermanentResidentrateonlywitheffectfromthenextterm.

PAYMENT OF FEESStudentswhohavesuccessfullyregisteredinacourseofstudyinITE,willbeissuedaUserIDandPassword.Youmayviewthefeespayableimmediatelyafterenrollingintoclass(es)byclickingonthe‘ViewAccount/MakePaymentlink’.YoumayalsoaccesstheonlineITEStudentPortal at https://myportal.ite.edu.sgonthenextworkingdaywiththeUserIDandPassword,toviewthefeespayable.Pleaserefertotheflowchartonpage26fortheprocedureonhowtoaccessyourFinancialAccountsthroughtheITEStudentPortal.

Youmaypaythefeesthroughthefollowingmodes:

(i) PostSecondaryEducationAccount(PSEA)(ii) OnlinePayment(forCredit&DebitCard)(iii) SkillsFutureCredit(forSingaporeansaged25andabove)[pleaserefertothesectionon

“ApplicantsUsingSkillsFutureCredit”fordetails](iv) Cheque,CreditCardandNETSpaymentatITECustomer&VisitorCentre(feestobe

paidinfullupfront)

32

(i) PAYMENT BY PSEA Uponwebenrolment,youneedtosubmitthe“AdHocApplicationfortheUseofPSEA”

Form to any ITE Customer & Visitor Centre by the stipulated deadline#.PleasevisittheMOEwebsiteatwww.moe.gov.sg/education/post-secondary/post-secondary-education-accountformoreinformationonPSEAandtodownloadtheAdHocPSEAForm.

(ii) ONLINE PAYMENT Upononline course registration, youhave tomakeonlinepayment by the stipulated

deadline#. If you do not make full payment by the stipulated deadline#, you are deemed tohavewithdrawnfromthemodule(s)thatyouhaveregisteredfor.Yourtrainingplacewillthenbeofferedtootherapplicants.

Ifyouhavemadeonlinepayment,yourpaymentrecordwillbeupdatedinyourFinancialAccount3workingdayslater.

(iii) APPLICANTS USING SKILLSFUTURE CREDIT CET Higher Nitec, Nitec and ISC courses areSkillsFutureCredit approved courses.

Applicantsmay use SkillsFutureCredit to pay for theCET course fees (specifically,tuitionfeesandexaminationfees).PleasenotethatregistrationfeesarenotacceptedforSkillsFutureCreditclaim.[Youmayvisitwww.skillsfuture.sg/credit for more details on SkillsFutureCredit.]

ApplicantsusingSkillsFutureCredittoapplyforCETcoursesaretoapplyatanyITECustomer&VisitorCentre.UponsuccessfulregistrationofCETcoursesandpaymentoftheregistrationfees*,applicantswillbeissuedaPaymentAdvicebyITE.ApplicantsneedtoaccesstheirSkillsFutureCreditaccountviawww.skillsfuture.sg/credit to submit theirclaimtoITE,forusingSkillsFutureCredittopaytheremainingfee.Applicantswhodonotsubmittheirclaimbythespecifiedtimeline^aredeemedtohavewithdrawnfromthemodule(s)registeredfor.

*If the available credit in your SkillsFuture Credit account is insufficient to cover the course fees, you will need to pay the balance (in addition to registration fees) upfront at registration at ITE Customer & Visitor Centre.

^Refer to the deadline for submission of SkillsFuture Credit claim indicated in the payment advice issued upon successful course application at any ITE Customer & Visitor Centre. Applicants whose SkillsFuture Credit claims are not approved in SkillsFuture Credit Portal (http://www.skillsfuture.sg/credit) on/before course start date will have to pay their full course fees by other available modes (e.g. NETS) within one week of course start date. Applicants not paying course fees will be withdrawn from their courses.

(iv) CHEQUE, CREDIT CARD AND NETS PAYMENT AT ITE CUSTOMER & VISTOR CENTRES

Uponcourseregistration,youhavetopaythefeesinfullupfront.

TocheckwhetherITEhasreceivedyourpayment,pleaseaccesstheonlineITEStudentPortaltoviewyourFinancialAccountstatus.

# Higher Nitec: Please visit www.ite.edu.sg/wps/portal/pts.hn.admission for actual deadline. Nitec / ISC: Please visit www.ite.edu.sg/wps/portal/pts.ni.admission for actual deadline.

33

WITHDRAWAL FROM MODULE(S) AND REFUNDWithdrawal from themodules is not encouraged. Studentswhowish towithdraw from themodule(s)theyhaveregisteredin,maysubmittheirapplicationforwithdrawaloverthecounteratanyCustomer&VisitorCentreortotheCollegetheyhaveenrolledin. Theamountoffeesrefundableisbasedonthedateofapplicationforrefundasfollows:

Application for Refund Remarks

Ifapplicationforrefundisreceived2weeksormorebeforethestartofcourse 100%refundoffees

Ifapplicationforrefundisreceivedlessthan2weeksbeforethestartofcourse 50%refundoffees

Ifapplicationforrefundisreceivedafterstartofcourse Norefund

Refundisnotanautomaticprocess.ApplicantmustapplyforrefundbeforeITEwillprocesstherequest.AllrequestsforrefundarenotguaranteedandaresubjecttoapprovalbyITE

ForstudentswhohadusedSkillsFutureCreditforpartial/wholepaymentofCETcoursefeesearlier,pleasenotethatSkillsFutureCreditisnotrecognisedforfeepayment/refundpurposearising from course withdrawal on or before course start date. Depending on the coursewithdrawaldate,andtheproportionoffeespaidusingSkillsFutureCredit,theapplicantmayhavetopayfeesarisingfromthecoursewithdrawal.

34

TRAINING SUPPORTMOE BURSARY SCHEME TheMinistryofEducation (MOE)offersaBursaryScheme forSingaporeCitizenspursuingNitecinServices/TechnologyandHigher NitecinServices/TechnologycoursesatITE.

WitheffectfromApril2018,theannualMOEBursaryquantumis$140.Tobeeligibleforthebursary,adultlearners:

• MustbeSingaporeCitizenswhoarepursuingNitecinServices/TechnologyandHigher NitecinServices/TechnologymodulesatITEandpayingsubsidisedfees;

• Shouldhaveagrossmonthlyhouseholdincome(GHI)1of≤$9,000oragrossmonthlyhouseholdpercapitaincome(PCI)2of≤$2,250;

• MustnothavebeenawardedtheMOEBursaryforthepastyear;and

• Mustnotconcurrentlyholdfullscholarship,butmayconcurrentlyholdpartialscholarshipsandbursaries.Ascholarshipwithannualandotherallowance(excludingcourse feespayment)ofmorethan$5,000ayearwillbedeemedasafullscholarship.

Nitec in Services/Technology andHigher Nitec in Services/Technology adult learners mayapplyfortheMOEBursarywithinamonthfromthecommencementofcourseforeachintakethrough the College of study. The bursary application form can be obtained from the College.

AdultlearnerswhoaresuccessfulintheirapplicationswillbegiventhebursarythroughtheirbankaccountsviaGIRO.

1 The GHI refers to the total gross monthly household income of immediate and non-immediate family members.

For unmarried students, (i) Immediate family members include parents who may or may not be living together with the student(ii) Non-immediate family members include grandparents, siblings, spouses of siblings, siblings of parents, and any other relatives

who are living together with the student.

For married/divorced/separated students, (iii) Immediate family members include spouse and all children who may or may not be living together with the student(iv) Non-immediate family members include parents, grandparents, siblings, spouses of siblings, siblings of parents, and any other

relatives who are living together with the student.

(v) Income = gross income contributions from self-employment, business or salaried employment (which includes basic salary, allowances, employee’s CPF contribution, overtime pay, etc.) as well as other sources of income (e.g. rent, alimony or maintenance allowance). Bonuses declared should be one twelfth of the annual wage supplements and bonuses received in the last 12 months. Payments-in-kind, reimbursement for transport and other expenses and National Service (NS) allowance earned by NS men are excluded.

2 PCI is computed based on total GHI divided by the number of immediate family members, and non-immediate family members living in the same household.

ABSENTEE PAYROLL FUNDING FOR EMPLOYERSTheabsenteepayroll funding is fundedby theSkillsFutureSingaporewith theobjectiveofdefrayingthemanpowercostsincurredbyemployerswhentheysendtheirworkersfortraining.To apply for absentee payroll funding, please go to www.skillsconnect.gov.sg.

35

PROGRESSION OPPORTUNITIES FOR CET GRADUATES

*Need to complete bridging programme for admission to the polytechnics.(Please refer to the following section on ‘Bridging Programme for Admission to Polytechnics’ for details).

PROGRESSION OPPORTUNITIES FOR CET GRADUATES

*Need to complete bridging programme for admission to the polytechnics. (Please refer to the following section on ‘Bridging Programme for Admission to Polytechnics’ for details).

Degree

GCE ‘A’

GCE ‘O’

GCE ‘N’

ISC

Entrance Test

Workplace Literacy & Numeracy (WPLN) Qualification

No Formal Qualification

Polytechnic Diploma

Specialist Nitec

Gen

eral

Edu

catio

n

ITE

CET

Cou

rse

Higher Nitec in Services /

Higher Nitec in Technology*

Nitec in Services /Nitec in Technology*

Gen

eral

Edu

catio

n

36

BRIDGING PROGRAMME FOR ADMISSION TO POLYTECHNICSENTRY REQUIREMENTS TO CET DIPLOMA COURSESHoldersof the ITECETqualificationsmayapply for provisional admission toCETdiplomacourses offered at the 5 polytechnics during the application periods for their April or October intakes.

Applicantswho are granted provisional admission by the polytechnics need to complete abridging programme conducted by ITE. Applicants are required to pass the bridging programme withinthevalidityperiodstatedintheletterforprovisionaladmissionissuedbythepolytechnicsbefore they can be admitted to the diploma course.

Theentryrequirementsandrequiredbridgingprogrammeareasfollows:

ITE CET Qualification

Entry Requirements

CET Diploma CourseApplied For

Bridging Programme (60 hours per Module)

Higher Nitec inServices/Technology

1yearrelevantworkexperience

RelevantCETDiplomaCourses

a) English b) Mathematics

NitecinServices/Technology

• GPA≥3.5• 2yearsrelevantworkexperience

Diploma in Engineering a) Englishb) Mathematicsc) Engineering

Mathematics

Diploma in Business PracticeDiplomainSportDiploma in Infocomm

a) Englishb) Mathematicsc) Business

Communication

DiplomainAppliedScience a) Englishb) Mathematicsc) Chemistry

EXEMPTION FROM BRIDGING MODULESApplicantswhohaveobtainedaminimumgradeofC6intherelevantGCE‘O’level,subjectmayseekmoduleexemption(seetablebelow)atthepointofapplicationtothepolytechnicswithrelevantdocuments.

GCE ‘O’ Level Subject Minimum Grade Bridging Module(s) Exempted

English At least C6 EnglishBusiness Communication

Elementary Mathematics At least C6 Mathematics

Additional Mathematics At least C6 Engineering Mathematics

37

APPLYING FOR BRIDGING MODULES AT ITEApplicants for bridgingmodulesmust produce the letter for provisional admission from thepolytechnics.ThebridgingmoduleswillbeofferedinAprilandOctoberyearly.

Registration for the bridging modules must be done personally during the registration period at anyITECustomer&VisitorCentreattheCollegesandITEHQduringofficehours.

FEES FOR BRIDGING MODULES

Bridging Modules Singapore Citizen (SC)

Singapore Permanent Resident (SPR)

Others including Repeat Learners*

English $67 $392 $1,116

Mathematics $65 $360 $1,019

Engineering Mathematics $72 $445 $1,276

Business Communication $72 $445 $1,276

Chemistry $86 $600 $1,747

*Studentwhohasfailedthemodulebefore.

Notes:1) TotalfeespayableincludeTuition,ExaminationandRegistrationFees.2) Feesaresubjecttorevision.3) Feesarechargedbasedoncitizenshipatthepointoftermcommencement.Studentswhohaveofficially informedITEoftheir

CitizenshipchangetoSingaporeCitizenorSingaporePermanentResidentbeforethetermcommencement,willhavetheirfeesadjusted to theSingaporeCitizen / SingaporePermanentResident rate for that term.However, for studentswho inform ITEofficiallyoftheirCitizenshipchangetoSingaporeCitizenorSingaporePermanentResidentafterthetermcommencement,theirfeeswillbeadjustedtotheSingaporeCitizen/SingaporePermanentResidentrateonlywitheffectfromthenextterm.

38

BRIDGING PROGRAMME FOR ADMISSION TO ITE TECHNICAL ENGINEER DIPLOMAENTRY REQUIREMENTS TO ITE TECHNICAL ENGINEER DIPLOMA COURSES (TED)HoldersoftheITECETqualificationsmayapplyforthefull-timeTechnicalEngineerDiplomainMachineTechnologyandTechnicalEngineerDiplomainAutomotiveEngineeringofferedbyITE during the application period for the April intake.

Theentryrequirementstothe2TEDcoursesareasfollows:

Directly Related and Less Directly Related CET

QualificationsGrade Point Average (GPA) Bridging Programme

(60 hours)

Higher NitecinServices/Technology

≥GPA2.0plus2yearsofrelevantworkexperience

MathematicsNitecinServices/Technology ≥GPA3.0plus2yearsofrelevantwork

experience

Applicantswhoaregrantedprovisionaladmissiontothefull-timeTEDcourseneedtocompleteBridging Mathematics.

Please see page 37 on “Applying for Bridging Modules at ITE” and “Fees for Bridging Modules” for more details.

EXEMPTION FROM BRIDGING MODULESApplicantswhohaveobtainedaminimumgradeofC6inGCE'O'ElementaryMathematicsneed not go through Bridging Mathematics.

40

HIGHER NITEC IN SERVICES – ACCOUNTINGCourseCode:HSACN

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgeinaccountingandrelatedareasforworkinthecommercial,industrialandpublicsectorsofthejobmarket.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Essential

Communication and IT90hrs(T)30hrs(P)Credits:5Prerequisite:Nil

BS4007FPR On completion of the module, students should be able to apply the communication skills to build successful working relationships in workplacesettings and to produce documents using appropriatesoftwareapplications.

EquivalentCodeOA4012PA

C2 Accounting Fundamentals90hrs(T)30hrs(P)Credits:6Prerequisite:Nil

AC4003FP On completion of the module, students should be able to record business transactions, prepare bank reconciliation statements, control accounts, Statement of Comprehensive Income andStatementofFinancialPosition.

EquivalentCodesOA4010PA AC4003PAAC4001FP

AC4001FPR

C3 Intermediate Accounting80hrs(T)40hrs(P)Credits:6Prerequisite:AdvisedtocompleteAC4003FP

AC4004FP On completion of the module, students should be abletocomputethedepreciationoffixedassets,determine the value of stock using variousmethods of valuation, correct various typesof errors through journal entries, and prepareadjusted final accounts for sole proprietorshipsand non-trading organisations.

EquivalentCodesAC4004PAAC4002FP

AC4002FPR

C4 Advanced Accounting80hrs(T)40hrs(P)Credits:7Prerequisite:AdvisedtocompleteAC4003FP & AC4004FP

AC5005FP On completion of the module students should be able to apply knowledge on professionalethics in accounting professions, prepare financial statements for partnerships and limitedcompanies. In addition, studentswill also learnto prepare cash-flow statements and cashbudgets, and to use and maintain a computerised accounting system.


AC5001FPR

C5 Costing80hrs(T)40hrs(P)Credits:5Prerequisite:AdvisedtocompleteAC4003FP & AC4004FP

AC5006FP On completion of the module, student should be able to apply costing principles and methods to ascertain the costs of labour, materials and overheadsforajobprocessorservice.


AC5002FPR

Abbreviations:T-Theory,P–Practical

41

CREDITS FOR CERTIFICATION Total of 29 credits from successful completion of 5 modules.

VENUE ITE College Central, ITE College West

Note:1) Thetrainingscheduleoflessonsissubjecttochange.2) Dependingonthedemand,notallthemodulesintheCETHigher NitecinServicescourses

willbeoffered ineach intake.Where themodulesareofferedand there is insufficientenrolment, theclasseswillbecancelledanda full refundwillbegiven to theaffectedstudents.

42

HIGHER NITEC IN SERVICES – BANKING SERVICESCourseCode:HSBNS

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgeinprovidingfrontlinebankingandfinancialservicestoindividuals,associationsandinstitutions.

COURSE STRUCTURE

S/N Module Details Module Code Module Objectives

C1 Essential Communication and IT90hrs(T)30hrs(P)Credits:5Prerequisite:Nil

BS4007FPR On completion of the module, students should beable to communicate effectively andhandlecommunicationrequiredinabusiness/workplaceenvironment as well as in social and crosscultural settings. In addition, they should be able to produce, format and organise business documents and spreadsheets using commonly usedsoftwarepackages.


C2 Accounting Fundamentals90hrs(T)30hrs(P)Credits:6Prerequisite:Nil

AC4003FP On completion of the module, students should be able to record business transactions, prepare bank reconciliation statements, control accounts, Statement of Comprehensive Income andStatementofFinancialPosition.

EquivalentCodesOA4010PAAC4003PAAC4001FP

AC4001FPR

C3 Banking Products and Services80hrs(T)40hrs(P)Credits:5Prerequisite:Nil

BK5006FP On completion of the module, students should be abletoidentifythedifferentbankingandfinancialservicesby localandforeignbanksandsimilarfinancial institutions. Students would also beable to apply skills and knowledge in variousbankingproductsandservicesofferedtobanks’clients.

EquivalentCodesEB4007PABK5001FP

C4 Personal Financial Planning70hrs(T)20hrs(P)Credits:5Prerequisite:Nil

BK5007FP On completion of the module, students should be able to apply principles of finance to themonetarydecisionsofanindividual,andmanagewaysinwhichoneobtains,budgets,savesandspends monetary resources, taking into account thevariousfinancialrisksforfuturelifeevents.


C5 Banking Operations80hrs(T)40hrs(P)Credits:5Prerequisite:Nil

BK5008FP On completion of the module, students should be able to apply skills and knowledge in thebank operations and handle various bankingtransactions such as deposits, withdrawals, billpayments,andothercashandnon-cashfinancialinstruments.


Abbreviations:T-Theory,P-Practical

43


VENUE ITE College Central

Note:1) Thetrainingscheduleoflessonsissubjecttochange.2) Dependingonthedemand,notallthemodulesintheCETHigher Nitec inServicescourses


44

HIGHER NITEC IN SERVICES – EVENT MANAGEMENTCourseCode:HSEVM

COURSE OBJECTIVE This course provides students with the skills and knowledge to conceptualising, planniingandexecutingeventsforthe“Meetings,Incentives,ConventionsandExhibitions”(MICE)andEventsindustry.

COURSE STRUCTURE



BS4007FPR On completion of the module, students should be able to apply the communication skills to build successful working relationships in theworkplace settings and to produce documentsusingappropriatesoftwareapplications.


C2 Event Planning and Management80hrs(T)40hrs(P)Credits:5Prerequisite:Nil

EV5006FP On completion of the module, students should be able to prepare an event concept, performdetailedplanning,handleeventset-up,manageonsiteactivitiesandmanagepost-eventactivities.

EquivalentCodesEV5001FP

EV5001FPR

C3 Principles of Marketing40hrs(T)20hrs(P)Credits:5Prerequisite:Nil

BS4006FPR On completion of the module, students should be able to understand the basic concepts of marketing mix and apply these concepts at the workplace.

EquivalentCodesOA5009PABS4006FP

C4 Facilities and Venue Management80hrs(T)40hrs(P)Credits:5Prerequisite:Nil

EV5007FP On completion of the module, students should be able to plan andmanage event venue facilitiesandinventory,procuresupplies,handleloanandbookingsystems,provideadvicetocustomersonset-up of temporary structures, and coordinate AV and lighting requirements.

EquivalentCodesEV5002FP

EV5002FPR

C5 Meetings, Incentives, Conventions and Exhibitions80hrs(T)40hrs(P)Credits:5Prerequisite:Nil

EV5008FP On completion of the module, students should be able to differentiate the processes for meetings, incentives,conventions,andexhibitions(MICE),develop business opportunities, market MICEprogrammes, manage sponsorships, coordinate MICE logistics, perform risk assessments and handlepost-MICEeventactivities.

EquivalentCodesEV5006PAEV5003FP

EV5003FPR

Abbreviations:T–Theory,P-Practical

45


VENUE ITE College Central



46

HIGHER NITEC IN SERVICES - HOSPITALITY OPERATIONSCourseCode:HSHSO

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgetoperformarangeofoperationalfunctionswithinanaccommodationestablishmentbyprovidingserviceat the frontofficeandexecutive lounge,maintaining rooms andmanaging sales and events tomeet the needs ofguestsforacomfortableandenjoyablestay. COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Hospitality Service

and Communication60hrs(T)30hrs(P)Credits:8Prerequisite:Nil

TS4006FP On completion of this module, students should beabletohandleoralandwrittencommunicationattheworkplace,displayprofessionalimageandservice etiquette, cultivate rapport with guests,handle guests from different cultures, manage guests’ expectations and perform servicerecovery.

EquivalentCodeNil

C2 Executive Lounge Operations40hrs(T)50hrs(P)Credits:7Prerequisite:Nil

TS4008FP On completion of this module, students should be able to perform pre- and post-service F&Bactivities, prepare beverages, and serve foodorders at the Executive Lounge, as well asprovidebutlerservice.

EquivalentCodeNil

C3 Front Office Operations60hrs(T)60hrs(P)Credits:6Prerequisite:Nil

TS5004FP On completion of this module, students should be able to handle the arrival and departure ofguests, room the guests, perform cashiering functions, and provide concierge and businesscentreservices.

EquivalentCodesTS40020TS50050TS40060

C4 Hospitality IT Systems40hrs(T)80hrs(P)Credits:6Prerequisite:Nil

TS5005FP On completion of this module, students should be able to create reservations, maintain customerdatabase and check out guest using a property management system,aswell asproduceworddocuments, spreadsheets and presentation slides.

EquivalentCodeNil

C5 Housekeeping Services60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

TS5006FP On completion of this module, students should beable toserviceand inspectguestroomsandpublic areas, perform night turndown service,follow up on crash/periodic programmes andhandle linen and laundry operations.

EquivalentCodesTS40050TS50010TS50100


47

CREDITS FOR CERTIFICATIONTotal of 34 credits from successful completion of 5 modules.

VENUEITE College West



48

HIGHER NITEC IN SERVICES – HUMAN RESOURCE & ADMINISTRATION

CourseCode:HSHRA

COURSE OBJECTIVEThis course provides studentswith the skills and knowledge to support a range of humanresource administrative functions in an establishment. It covers topics in recruitment, on-boarding and off-boarding, training administration, processing claims and employee relations and communication.

COURSE STRUCTURE



BS4007FPR On completion of the module, students should beable to communicate effectively andhandlecommunicationrequiredinabusiness/workplaceenvironment as well as in social and crosscultural settings. In addition, they should be able to produce, format and organise business documents and spreadsheets using commonly usedsoftwarepackages.


C2 Recruitment and Selection40hrs(T)50hrs(P)Credits:5Prerequisite:Nil

HR5001FPR On completion of the module, students should be abletoprovidesupportinrecruitment,selection,pre-boarding, on-boarding and off-boarding activities.

EquivalentCodeNil

C3 Human Resource Information and Administration40hrs(T)50hrs(P)Credits:5Prerequisite:Nil

HR5002FPR On completion of the module, students should beabletoprocessandsetupnewhire’sforms,process employee claims and payroll and update the Human Resource Information System(HRIS).

EquivalentCodeNil

C4 Training Administration40hrs(T)20hrs(P)Credits:5Prerequisite:Nil

HR5003FPR On completion of the module, students should be able to support the training administrativefunction in an organisation, providing logisticssupport, processing training claims and maintain training records and the training calendar.

EquivalentCodeNil

C5 Employee Relations and Communication40hrs(T)20hrs(P)Credits:5Prerequisite:Nil

HR5004FPR On completion of the module, students should be able to attend to basic employee queries and coordinate a range of staff-related programmes such as employee recognition and employee well-being programmes as well as employeebenefits.Studentsshouldalsobeabletohandlearangeofassociatedadministrativetasks.

EquivalentCodeNil


49


VENUEITE College Central, ITE College East



50

HIGHER NITEC IN SERVICES – INTERACTIVE DESIGN

CourseCode:HSIDN/PlanCode:HSIDN

COURSE OBJECTIVEThiscourseprovidesstudentswithskillsandknowledge todesignanddevelop responsivewebsitesanddesignforapplications,userinterfacesfordigitalplatformsandproducedigitalassets.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Visual Design

Principles 20hrs(T)100hrs(P)Credits:7Prerequisite:Nil

DM4005FP On completion of the module, students should be abletoapplybasicdrawingskillsandfoundationin design.

EquivalentCodeNil

C2 Digital Photography and Imaging 30hrs(T)90hrs(P)Credits:7Prerequisite:Nil

DM4006FP On completion of the module, students should be able to acquire and manipulate digital images for variousoutputs;printandwebplatforms.

EquivalentCodeNil

C3 Interactive User Experience Design 20hrs(T)100hrs(P)Credits:7Prerequisite:Nil

DM4007FP On completion of the module, students should be able to apply the user interface design process and demonstrate understanding of the fundamentalsanduseoftypographyforweb.

EquivalentCodeNil

C4 Digital Content Design 30hrs(T)90hrs(P)Credits:7Prerequisite:Nil

DM4008FP On completion of the module, students should be able to integrate digital media such as audio andvideoelements,animationandothermediaformats into user centred experience.

EquivalentCodeNil

C5 Web Design and Development 20hrs(T)100hrs(P)Credits:7Prerequisite:AdvisedtocompleteDM4007FP

DM5006FP On completion of the module, students should be able to apply the fundamentals of webdevelopmentusinghypertextmark-uplanguage(HTML)andcascadingstylesheets(CSS).

EquivalentCodeNil

C6 Responsive Web Design for Application 20hrs(T)100hrs(P)Credits:7Prerequisite:AdvisedtocompleteDM4007FP

DM5008FP On completion of the module, students should be able to apply responsive design frameworksuchasflexiblegridsandlayouts,imagesandanintelligentuseofHTML5,JavascriptandCSS3media queries.

EquivalentCodeNil

Abbreviations:T–Theory,P–Practical

51


VENUEITE College Central

Note:1) Applicantmustbefreefromcolourappreciationdeficiency.2) Thetrainingscheduleoflessonsissubjecttochange.3) Dependingonthedemand,notallthemodulesintheCETHigher NitecinServicescourses


52

HIGHER NITEC IN SERVICES – LOGISTICS FOR INTERNATIONAL TRADECourseCode:HSLIT

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgetoco-ordinatethemovementofgoods, both imports and exports. It covers topics in the concept of logistics,warehousing,inventory,freight,anddistributiontechniques.

COURSE STRUCTURE



BS4007FPR On completion of the module, students should be able to communicate effectively and handlecommunicationrequiredinabusiness/workplaceenvironment as well as in social and crosscultural settings. In addition, they should be able to produce, format and organise business documents and spreadsheets using commonly usedsoftwarepackages.


C2 Logistics and Supply Chain Management80hrs(T)10hrs(P)Credits:5Prerequisite:Nil

LG4002FPR On completion of the module, students should be abletoexplaintheconceptsoflogistics,objectivesandkeyactivitiesoflogistics,thevariouspartiesinvolvedinprovidinglogisticsservicesandknowthe trends and challenges facing the logistics industry. Inaddition,studentswillbe trainedonbasic supply chain management concepts.

EquivalentCodesLG4004PA LG4002FP

C3 Freight Operations and Distribution Management90hrs(T)30hrs(P)Credits:5Prerequisite:Nil

LG4001FPR On completion of the module, students should be able to explain the freight process and the cost involved ineffectingashipment, toprepare thevariousshippingdocumentsneeded in thesea,airfreightandmulti-modalenvironment.Studentsare trained to explain the documentation used and the procedure for local distribution, the local clearance at the sea and airport in Singaporewhich will cover both containerised andconventionaltransportation.

EquivalentCodesLG4005PALG4001FP

C4 Warehousing and Inventory Management 80hrs(T)40hrs(P)Credits:5Prerequisite:Nil

LG4003FPR On completion of the module, students should be able to explain the various functions ofa warehouse and to perform the varioustransactionsandactivitiesinatypicalwarehouseenvironment.Inaddition,studentswillbetrainedtoexplaintheotheraspectsofwarehousingwhichwill include inventory control andmanagement,the measurements of warehouse performanceand,safetyandsecurityissuesinawarehouse.

EquivalentCodesLG4006PA LG4003FP

53

S/N Module Details Module Code Module ObjectivesC5 Cargo

Documentation and Practices70hrs(T)20hrs(P)Credits:5Prerequisite:Nil

LG5001FPR On completion of the module, students should be able to explain the trade procedure, interpret international trading terms, identify customs documentation and procedures, handle dangerous goods shipment, insurance and security issues in exporting cargo to USA. Inaddition, studentswill be trained to explain thetradeprocedurespecifictoSingaporeandbeabletodeclarepermitsusingtheTradeNetsystem.

EquivalentCodesLG5003PALG5001FP



VENUEITE College East



54

HIGHER NITEC IN SERVICES – MARITIME BUSINESSCourseCode:HSMBS

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgeinmaritimecargotransportation.Itcoverstopicsinshipandportoperations,cargoandshipmanagementandcoordinationwithvariousmaritimestakeholderssuchasportauthorities,shipownersandcharterers,shippingagencies,logisticsprovidersandsuppliers.

COURSE STRUCTURE



BS4007FPR On completion of the module, students should be able to communicate effectively and handlecommunicationrequiredinabusiness/workplaceenvironment as well as in social and crosscultural settings. In addition, they should be able to produce, format and organise business documents and spreadsheets using commonly usedsoftwarepackages.


C2 Introduction to Maritime Industry60hrs(T)30hrs(P)Credits:5Prerequisite:Nil

SH4001FP On completion of the module, students should have a foundational understanding of themaritime industry in terms of maritime geography, ships and cargo, maritime terminology, careers and challenges facing the industry.

EquivalentCodeNil

C3 Shipping and Port Operations80hrs(T)40hrs(P)Credits:5Prerequisite:Nil

SH5006FP On completion of the module, students should be able to support key shipping and port operations activities.Theywouldalsobe introduced to theconcepts of maritime cargo transportation and equipped with an understanding of the trendsand challenges facing the industry.

EquivalentCodeNil

C4 Shipping Documentation 60hrs(T)60hrs(P)Credits:5Prerequisite:Nil

SH5007FP On completion of the module, students should be able to identify and apply for the different typesofdocumentsrelatedtocargomovement.Studentswouldalsobeequippedwiththeskillsand knowledge to assist customers in cargoshipment.

EquivalentCodeNil

C5 Ship Agency and Operations80hrs(T)40hrs(P)Credits:6Prerequisite:Nil

SH5008FP On completion of the module, students should be able to support a ship manager/agent inthe management of maritime commercial vessels. Students would also be equippedwith the knowledge and skills to carry out shipagency functions relating to vessel operations,management, and cargo shipment.

EquivalentCodeNil


55





56

HIGHER NITEC IN SERVICES – PERFORMANCE PRODUCTIONCourseCode:HSPPZ

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandtechnicalknowledgetointerpretproductiondocumentsaswellastomanageperformanceproductionresources.Theywillbeabletosetupandoperateproductionequipmentandsystems(lighting,sound,multimediaandstaging),coordinateproductionelementsandsetstoensureefficientandsmoothrunningofaproduction.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Lighting for

Production I18hrs(T)102hrs(P)Credits:6Prerequisite:Nil

PF4002FP On completion of the module, students should be able to interpret lighting document, set up and operate lighting equipment and systems in accordance with work safety and healthrequirements and regulations.

EquivalentCodeNil

C2 Sound for Production I 18hrs(T)102hrs(P)Credits:6Prerequisite:Nil

PF4003FP On completion of the module, students should be able to interpret sound document, set up and operate sound system and equipment in accordance with work safety and healthrequirements and regulations.

EquivalentCodeNil

C3 Stage Craft and Staging System 30hrs(T)90hrs(P)Credits:8Prerequisite:Nil

PF4004FP On completion of the module, students should be able to interpret staging and set documents, set up, test and operate staging systems in accordance with work safety and healthrequirements and regulations. They should also be able to fabricate the necessary items in line with the creative direction of the performanceproduction.

EquivalentCodeNil

C4 Visual Multimedia 30hrs(T)90hrs(P)Credits:7Prerequisite:Nil

PF5001FP On completion of the module, students should be abletosetup,testandprogramvisualmultimediaequipment in accordance with work safety andhealth requirements and regulations.

EquivalentCodeNil

C5 Lighting for Production II 18hrs(T)102hrs(P)Credits:7Prerequisite:AdvisedtocompletePF4002FP

PF5002FP On completion of the module, students should be able to execute programming of the lighting desk, use lighting software to create lighting effectsand documents for a performance production. They should also be able to maintain lighting equipment and system.

EquivalentCodeNil

57

S/N Module Details Module Code Module ObjectivesC6 Sound for

Production II18hrs(T)102hrs(P)Credits:7Prerequisite:AdvisedtocompletePF4003FP

PF5003FP On completion of the module, students should be able to mic up for any type of band set up, operate sound console, use sound softwareto edit and record sound for a performance production. They should also be able to maintain sound equipment and system.

EquivalentCodeNil




Note:1) Applicantmustbefreefromcolourappreciationdeficiency.2) Applicant will be required to attend an interview and pass a height phobia test for

admission.3) Thetrainingscheduleoflessonsissubjecttochange.4) Dependingonthedemand,notallthemodulesintheCETHigher NitecinServicescourses


58

HIGHER NITEC IN SERVICES – SPACE DESIGN TECHNOLOGYCourseCode:HSSDT

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandtechnicalknowledgetodeveloparchitecturaldetailingandspecifications,preparearchitecturalprojectdocumentationandtocheckthatthearchitecturaldrawingsareincompliancewiththestandards,codesandregulationsthroughtheuseoftechnologytofacilitatetheefficientflowofinformation.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Architectural

Drawing 18hrs(T)102hrs(P)Credits:7Prerequisite:Nil

SD4009FP On completion of the module, students should be able to apply concepts of spatial composition and knowledge of architectural drawing techniquesand conventions to produce architecturalsketches, perspectives, architectural buildingdrawings and presentation boards for furtherdesigndevelopment.

EquivalentCodesSD4001FPRSD4005FPR

C2 Architectural Presentation 18hrs(T)102hrs(P)Credits:7Prerequisite:Nil

SD4010FP On completion of the module, students should be able to produce a consolidated architectural presentationpackagecompletewithprojectbrief,presentationdrawings,3Drendering,animationsand multi-media presentation.

EquivalentCodesSD4002FPRSD4006FPR

C3 Architectural Design Process 18hrs(T)102hrs(P)Credits:7Prerequisite:AdvisedtocompleteSD4009FP&SD4010FP

SD4007FPR On completion of the module, students should be able to collate information on applicable building regulationsandrequiredtechnicalspecificationsfor a chosen project typology. They should beable to produce a complete set of architectural working drawings for the chosen typology,withrelevant architectural details and schedules, inaccordance to prevailing Code of Practice byapplyingknowledgeoflocalbuildingregulations.

EquivalentCodeSD4003FPR

C4 Architectural Application 18hrs(T)102hrs(P)Credits:7Prerequisite:AdvisedtocompleteSD4009FP&SD4010FP

SD4008FPR On completion of the module, students should beabletoproduceasetofsubmissiondrawingsand perform Buildability Score calculations.They should also be able to produce complete sets of architectural tender and construction drawing packages incorporating all requireddrawings, details, technical specifications anddocumentation necessary for calling of tender andconstructionofbuildingsonsiterespectively.

EquivalentCodeSD4004FPR

59

S/N Module Details Module Code Module ObjectivesC5 Architectural BIM

Design30hrs(T)90hrs(P)Credits:7Prerequisite:Nil

SD5004FP On completion of the module, students should be able to assist the Architects to carry out analysisanddetaileddesignalongwithselectionof materials and fixtures, for enhancement ofbuildingperformanceforGreenMarkcertificationand implementation of sustainable design practices.

EquivalentCodeSD5001FPSD5001FPR

C6 Green Mark and Universal Design 30hrs(T)90hrs(P)Credits:7Prerequisite:Nil

SD5002FPR On completion of the module, students should be able to assist the Architects to carry out analysisanddetaileddesignalongwithselectionof materials and fixtures, for enhancement ofbuildingperformanceforGreenMarkcertificationand implementation of sustainable design practices.

EquivalentCodeSD5002FP


CREDITS FOR CERTIFICATIONTotal of 42 credits from successful completion of 6 modules. VENUEITE College Central



60

HIGHER NITEC IN SERVICES – VISUAL MERCHANDISINGCourseCode:HSVSM

COURSE OBJECTIVEThis course provides students with the skills and knowledge to conceptualise, design andimplementwindowandin-storedisplays.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Arts and Design

15hrs(T)105hrs(P)Credits:6Prerequisite:Nil

DM4001FP On completion of the module, students should be able to apply the fundamental drawingtechniques to express their perception of forms using various mediums. They should also beable to apply design elements and principles into compositionsthatcreativelyexpresstheirideas.

EquivalentCodeDM4001PA

C2 Visual Merchandising Graphics39hrs(T)81hrs(P)Credits:6Prerequisite:Nil

DM4003FP On completion of the module, students should be able to apply different types of material used and the application of visual graphics to affectconsumer’s choice. Students should also beable to create and retouch graphics for the production of signage and graphics.


C3 Retail Marketing 78hrs(T)42hrs(P)Credits:7Prerequisite:Nil

DM4004FP On completion of the module, students should be able to apply the core principles and practices of marketing in a retail context and to identify the retail marketing mix, consumer buying behaviour,retailtrendsandstrategies.


C4 Visual Merchandising Design 39hrs(T)81hrs(P)Credits:6Prerequisite:AdvisedtocompleteDM4001FP & DM4003FP

DM5001FP On completion of the module, students should be able to design a product presentation that iscohesivewithmarketingstrategies.Studentsshouldalsobeabletomakeuseofenvironment,lighting, fixtures and forms to enhance thepresentation.


C5 Retail Space Design39hrs(T)81hrs(P)Credits:6Prerequisite:AdvisedtocompleteDM4001FP & DM4003FP

DM5002FP On completion of the module, students should beabletoapplytheknowledgeofspacedesign,retail space techniques and principles to reinforce branding and enhance retail experiences.


C6 Applied Visual Merchandising 39hrs(T)81hrs(P)Credits:6Prerequisite:AdvisedtocompleteDM5001FP

DM5003FP On completion of the module, students should be able to analyse the current presentation practices and techniques, methodology, themes and inherentqualitiesof varyingclassificationsof merchandise and translate them into studio setups which include propping and showcasedisplay.



61





62

HIGHER NITEC IN TECHNOLOGY – CHEMICAL TECHNOLOGYCourseCode:HTCHT

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgetocarryoutprescribedproceduresand techniques required for sample processing and analyses of chemicals applicable to the pharmaceutical,petrochemical/chemical,polymer,foodandenvironmentalindustries.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Introductory

Chemistry39hrs(T)81hrs(P)Credits:6Prerequisite:Nil

LS4001FPR On completion of the module, students should be able to identify the common elements of organic molecules, nomenclature used, chemical structure and bonding, common functional groups, as well as the properties associatedwith the various functional groups of organiccompounds.

EquivalentCodesLS4005PALS4001FP

C2 Analytical Chemistry39hrs(T)81hrs(P)Credits:6Prerequisite:Nil

LS4002FPR On completion of the module, students should be able to carry out laboratory procedures in preparation of reagents and media, as wellas applications in maintaining and handling glassware, performing sampling methodologyandvariousseparationtechniques.


C3 Quality Control and Assurance39hrs(T)81hrs(P)Credits:6Prerequisite:Nil

LS4004FPR On completion of the module, students should be able to illustrate game play elements, process digital imaging and basic multimedia using 2D graphics technologies for developing casualcomputer games.


C4 Sample Handling and Processing39hrs(T)81hrs(P)Credits:4Prerequisite:Nil

LS5005FPR On completion of the module, students should be able to perform common sample pre-treatment methodologies,aswellassamplingactivitiesandprocesseswhichcomplywithindustrialstandardssuch as cGMP and GLP.


C5 Basic Instrumental Analysis39hrs(T)81hrs(P)Credits:7Prerequisite:AdvisedtocompleteLS4001FP&LS4002FP

LS5006FPR On completion of the module, students should be abletoperformvariousmodesofspectroscopy,which include ultra-violet and infraredspectrometry, atomic absorption spectrometry, andtheapplicationsofinductive-coupledplasmaandthermalbenchinstruments.Theywillalsobeable to troubleshoot and maintain spectroscopic and thermal bench instruments.


C6 Advanced Instrumental Analysis39hrs(T)81hrs(P)Credits:7Prerequisite:AdvisedtocompleteLS5006FP

LS5007FPR On completion of the module, students should be able to perform the various modes ofchromatography,whichincludeHighPerformanceLiquid Chromatography (HPLC), GasChromatography (GC), LC-Mass Spectrometryand GC–Mass Spectrometry. They will also beable to troubleshoot and conduct basic routine maintenance for chromatographic instruments.



63



Note:1) Thetrainingscheduleoflessonsissubjecttochange.2) Dependingonthedemand,notall themodulesintheCETHigher Nitec in Technology

courses will be offered in each intake. Where the modules are offered and there isinsufficientenrolment,theclasseswillbecancelledandafullrefundwillbegiventotheaffected students.

64

HIGHER NITEC IN TECHNOLOGY – CIVIL & STRUCTURAL ENGINEERING DESIGNCourseCode:HTCSZ

COURSE OBJECTIVEThiscourseprovidesstudentswiththetechnicalskillsandknowledgetoprepareBIMmodels,steel structural drawings, reinforced concrete drawings and civil engineering drawingsaccordingtodesigner'ssketchesandspecificationsincompliancewitharchitecturaldrawingsandrelevantCodesofPractices.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Engineering

Graphics 39hrs(T)81hrs(P)Credits:6Prerequisite:Nil

ED4001FP On completion of the module, students should be able to produce technical sketches, engineering detaileddrawings,3Dsolidmodelling,assemblydrawingsinaccordancewithISOstandards.

EquivalentCodeED4001PA

C2 Building Information Modelling39hrs(T)81hrs(P)Credits:7Prerequisite:AdvisedtocompleteED4001FP

ED4007FP On completion of the module, students should be able to create 3D models, extract information, perform taking-off from BIM model and produce BIM components.

EquivalentCodeNil

C3 Building Structures and External Works60hrs(T)60hrs(P)Credits:8Prerequisite:AdvisedtocompleteED4001FP

ED4004FP On completion of the module, students should be able to produce foundation layout plans and schedules of footing and staircase, reinforced concrete drawings of floor, staircase, andstructural components such as foundations, retaining walls and detailed drawings ofexternalworkssuchasdrains,sewers,culverts,carriageway,drainageandseweragesystems.

EquivalentCodeNil

C4 Reinforced Concrete Detailing and Design 40hrs(T)80hrs(P)Credits:8Prerequisite:AdvisedtocompleteED4001FP

ED5001FP On completion of the module, students should beabletocreate3DmodelsusingBIM,todrawstructuraldrawingsforpiling,pilecaps,reinforcedconcretecorewalls,preparecolumnschedulesand detailed drawings of reinforced concretebeams and slabs, precast concrete components andprecastbeamandslabdrawings.

EquivalentCodeNil

C5 Steel Structure Detailing and Design 60hrs(T)60hrs(P)Credits:7Prerequisite:AdvisedtocompleteED4001FP

ED5003FP On completion of the module, students should be able to create 3D steel structure models using BIMsoftwareand toproducestructureworkingdrawings with detailed connections of steelmembers.



65





66

HIGHER NITEC IN TECHNOLOGY – ELECTRICAL ENGINEERINGCourseCode:HTELE

COURSE OBJECTIVEThiscourseprovidesstudentswithbroad-basedskillsandknowledgeinelectricalengineeringthat includes the operation, monitoring and maintenance of electrical installations and control systems in residential, commercial and industrial premises according to engineering specifications,codesofpracticeandregulations.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Electrotechnology

and Motor Control 78hrs(T)42hrs(P)Credits:7Prerequisite:Nil

EE4001FPR On completion of the module, students should be able to connect, test and analyse DC and AC circuits and networks, electromagnetic circuits,electrical motors and motor control circuits.

EquivalentCodesEE4006PAEE4010PAEE4001FP

C2 Electrical Installations and Design 36hrs(T)90hrs(P)Credits:6Prerequisite:Nil

EE4002FPR On completion of the module, students should be able to install, control and maintain domestic, commercial,industrialaswellasspecialelectricalinstallations, design and produce electrical drawings and diagrams in compliance with therelevantcodesofpractice.


C3 Intelligent Control Systems and Programming12hrs(T)108hrs(P)Credits:6Prerequisite:Nil

EE5001FPR On completion of the module, students should be able to program, test and commission an open protocol system for residential, commercial and industrial control and automation applications and write simple computer programs to solveengineering problems.


C4 Electrical Machines and Drives 72hrs(T)48hrs(P)Credits:7Prerequisite:AdvisedtocompleteEE4001FPR

EE5002FPR On completion of the module, students should beable to startup,operate, testand/or controlthe speed of DC and AC machines and electrical equipment, explain their construction, principles of operation, operating characteristics and applications.


C5 Instrumentation and Control Systems 36hrs(T)84hrs(P)Credits:5Prerequisite:Nil

EE5003FPR On completion of the module, students should be able to operate and calibrate process instruments and equipment, implement PLC projects andmaintain process control systems.


C6 Electrical Power Systems 75hrs(T)45hrs(P)Credits:7Prerequisite:AdvisedtocompleteEE4002FPR

EE5004FPR On completion of the module, students should beabletooperateandmaintainelectricalpowersystemsandequipment, includingpower factorcorrection equipment, motor control centres, electrical switchboards, protective relays,switchgears, auto mains failure control anduninterruptiblepowersupplies.



67


VENUEITE College East, ITE College West

Note:1) Applicantmustbefreefromcolourappreciationdeficiency.2) Thetrainingscheduleoflessonsissubjecttochange.3) Dependingonthedemand,notall themodulesintheCETHigher Nitec in Technology


68

HIGHER NITEC IN TECHNOLOGY – ELECTRONICS ENGINEERINGCourseCode:HTECEIC

COURSE OBJECTIVEThis course provides students with the skills and knowledge to install, configure, test andmaintainsensorsdevicesandcontrollerstosupporttheInternet-of-Things(IoT)architectureplatform.Studentswilllearntoprogrammicrocontroller-basedsystems,performsensorsandcommunicationnetworksinterfacingwhichcouldbedeployedinthehealthcare,transportation,logistics, retail, etc. industries.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Analogue Principles

and Applications 60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

EC4105FP On completion of the module, students should be able to interpret, construct, test and analyse variousanaloguecircuitsanddevices.

EquivalentCodesEC4002PAEC4008PAEC4101FP

EC4101FPR

C2 Digital Principles and Applications60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

EC4106FP On completion of the module, students should be able to interpret, design, construct, test and troubleshoot digital electronic circuits and devices.


EC4102FPR

C3 Communications and Networking 60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

EC4107FP On completion of the module, students should be able to set up and maintain wired andwireless Local Area Network (LAN) and radiocommunication systems. They should be able to perform troubleshooting on networks andsystems.


EC4103FPRC4 Microcontroller

Applications 30hrs(T)90hrs(P)Credits:6Prerequisite:Nil

EC4108FP On completion of the module, students should be able to interpret system requirements, create algorithmsanddevelopmicrocontrollerprogramtocontrolandmonitorexternaldevices.


EC4104FPRC5 Devices and

Applications60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

EC5501FP On completion of the module, students should beabletoidentifyandapplythevarioustypesofsensors for different applications.

EquivalentCodeNil

C6 IoT Integration30hrs(T)90hrs(P)Credits:6Prerequisite:Nil

EC5502FP On completion of the module, students should beabletosetupandintegratesensors/actuatorswith controllers; configure and test wired/wirelesssensornetworkstoperformusefultasks.StudentswillalsobeabletodeployIoTinareassuch as Healthcare, Logistics and Transport.

EquivalentCodeNil


69


VENUEITE College Central, ITE College East, ITE College West



70

HIGHER NITEC IN TECHNOLOGY – FACILITY MANAGEMENTCourseCode:HTFCM

COURSE OBJECTIVEThiscourseprovidesstudentswithknowledgeandskillsinsupervisingbuildingmaintenanceworkandcoordinatetheexecutionoffacilitymanagementactivitiesinadditiontoperformingmaintenance duties.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Mechanical

Systems and Services72hrs(T)48hrs(P)Credits:6Prerequisite:Nil

CB4001PAR On completion of the module, students should be able to interpret building system plan, verify parts replacement, maintain standbygenerators, pumps, operate and maintain fire-fighting equipment such as fire-alarm systems,hose-reel installations, sprinkler systems, fire-fighting hydrants, portable fire extinguishers,emergency voice communication systemsand fire suppression systems in the industrial,commercial and residential buildings.

EquivalentCodeCB4001PA

C2 Electrical Systems and Services 72hrs(T)48hrs(P)Credits:7Prerequisite:Nil

CB4002PAR On completion of the module, students should be able to interpret electrical circuit diagrams, conduct insulation resistance and continuity tests, coordinate/install conduits and trunking,maintain power and lighting circuits, standbygenerators and emergency lightings and audio visualsystem.


C3 Air-conditioning Systems 72hrs(T)48hrs(P)Credits:7Prerequisite:Nil

CB4003PAR On completion of the module, students should be able to supervise the installation, maintenanceand first line troubleshooting of unitary-typeand split-type residential air-conditioning units, packaged units, air-cooled and water-cooledcentralised air-conditioning system and cold room.


C4 Building Management System 72hrs(T)48hrs(P)Credits:6Prerequisite:Nil

CB4004PAR On completion of the module, students should beable to interpret thevarious typesofcontrolsystemslinkedtoBMS,conductwellnesscheck,operatetheBMS,identifythecommoncausesoffaults and compile system reports.


C5 Building Services Systems Analysis and Management 72hrs(T)48hrs(P)Credits:8Prerequisite:Nil

CB5002PAR On completion of the module, students should be able to interpret architectural and structural drawings, maintenance of masonrywork, inspection of painting work and drain forstagnantwater,identificationoffaultyfittingsandfixtures, water-proofing breaches, monitoringtheinstallation,maintenanceandrepairofwatersupply,plumbingandsanitarysystems,supervisepestcontrol,landscapingandcleaningactivities.Students should also be familiarwith the basictechniques of troubleshooting faulty systems.


71

S/N Module Details Module Code Module ObjectivesC6 Project

Management and Supervision 72hrs(T)48hrs(P)Credits:5Prerequisite:Nil

CB5003PAR On completion of the module, students should be able to plan for resource deployment and work schedule, supervision of project activitiesand staff, resolving site issues and conflicts,ensuring compliance to safety, security and statutory requirementsand communicationwithstakeholders to ensure co-operation among stakeholdersforsmoothcompletionofproject.







72

HIGHER NITEC IN TECHNOLOGY – GAMES ARTS & DESIGNCourseCode:HTGAD

COURSE OBJECTIVEThis course provides students with the skills and knowledge to create art assets for theproductionofgamesonvariousplatforms.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Games Design


GD4101FP On completion of the module, students should be able to create a complete game design or a technicaldesigndocumentfollowingtheindustryrequirements. He/she should also be able tomanage the game development process, fromconceptualisation to the final release of thegame.

EquivalentCodeGD4005PA

C2 Games Level Design 48hrs(T)72hrs(P)Credits:7Prerequisite:Nil

GD5101FP On completion of the module, students should be abletodesignandeditgamelevelsofdifferentgame genres for playability.EquivalentCode

GD4006PA

C3 2D Games Asset Creation 36hrs(T)84hrs(P)Credits:7Prerequisite:Nil

GD4203FP On completion of the module, students should be able to illustrate game play elements, process digital imaging and basic multimedia using 2D graphics technologies for developing casualcomputer games.


C4 3D Modelling and Texturing for Games 24hrs(T)96hrs(P)Credits:6Prerequisite:Nil

GD4204FP On completion of the module, students should be abletodevelopathoroughunderstandingofthe3Dworkflow, learning how to create, edit, andrefine polygonmodels, add textures and applyUVmapsacrosscomplex,inorganicenvironmentmodels and organic game character models.


C5 3D Rigging and Animation for Games 36hrs(T)84hrs(P)Credits:7Prerequisite:Nil

GD5202FP On completion of the module, students should be able to create rigs for game models and then animate game models in seamless looping cyclesbasedonthevariousgamestatesofthe3D models.


C6 Games Portfolio Development 36hrs(T)84hrs(P)Credits:7Prerequisite:Nil

GD5203FP On completion of the module, students should be abletoapplydesignprinciplestodevelopabasicportfolio package comprising resume, name card, portfolio pieces and portfolio demo reel for thevarioustracksinthegameindustry.



73





74

HIGHER NITEC IN TECHNOLOGY – GAMES PROGRAMMING & DEVELOPMENTCourseCode:HTGPD

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgetowritegamecodesusingscriptingandprogramminglanguagestosupportgamedevelopmentonvariousplatforms.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Games Design


GD4101FP On completion of the module, students should be able to create a complete game design or a technicaldesigndocumentfollowingtheindustryrequirements. He/she should also be able tomanage the game development process, fromconceptualisation to the final release of thegame.


C2 Games Level Design 48hrs(T)72hrs(P)Credits:7Prerequisite:Nil

GD5101FP On completion of the module, students should be abletodesignandeditgamelevelsofdifferentgame genres for playability.EquivalentCode

GD4006PA

C3 Programming Fundamentals 36hrs(T)84hrs(P)Credits:7Prerequisite:Nil

GD4102FP On completion of the module, students should be able to apply object-oriented concepts andmodular techniques to develop programme forcomputer applications.


C4 Games Development Techniques 24hrs(T)96hrs(P)Credits:6Prerequisite:Nil

GD4104FP On completion of the module, students should be able to develop 2D games using 2D gameauthoring tool and 2D game developingtechniques.


C5 Games Programming 36hrs(T)84hrs(P)Credits:7Prerequisite:Nil

GD4103FP Uponcompletionofthemodule,studentsshouldbeabletodesignanddevelop2Dand3Dgamesusinggamedevelopmentengines.EquivalentCode

GD5204PA

C6 Mobile Games Development 36hrs(T)84hrs(P)Credits:7Prerequisite:Nil

GD5102FP On completion of the module, students should beabletodesign,developanddeploygamesformobiledevices.EquivalentCode

GD5205PA


75





76

HIGHER NITEC IN TECHNOLOGY – IT SYSTEMS & NETWORKSCourseCode:HTISN

COURSE OBJECTIVEThiscourseprovidesstudentswithskillsandknowledgetosetup,maintainandtroubleshootend-user computing devices, network, server and application in a hybrid infrastructureenvironment;implementwirelessLAN,networksecurity,andsupportITprojectdevelopmenttoensuresmoothoperationsofInfocommhardwareandsoftwareintheorganisation.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Computer

Maintenance and Operating Systems 39hrs(T)81hrs(P)Credits:7Prerequisite:Nil

IT4041FP On completion of the module, students should beabletoperforminstallationandconfigurationof operating system and application softwareon end user computing devices. In addition,they should be able to install and configureperipherals,performendusercomputingdevicesmaintenance and troubleshooting of hardwareandsoftwareproblems.

EquivalentCodesIT4006PAIT4022PAIT4101FP

IT4101FPR

C2 Networking Technology 39hrs(T)81hrs(P)Credits:7Prerequisite:Nil

IT4042FP On completion of the module, students should be able to apply the fundamentals of computer networking in relation to the OSI model. Theyshouldalsobeabletosetupandconfigurewiredlocal area network (LAN) including IP addresscalculation,switching, routing, routingprotocolsandvirtuallocalareanetworks(VLANs).


IT4102FPR

C3 System Administration 39hrs(T)81hrs(P)Credits:7Prerequisite:Nil

IT4043FP On completion of the module, students should be able to install and set up server operatingsystems and perform system administration tasks such as user management, resource sharing, security management, preventivemaintenance, and performance tuning on these systems.Studentswill thenproceedtoperformvalue-added features such as implementingserversecurityandhigh-availabilitysystems.

EquivalentCodesIT5103PAIT5103PRIT5105PAIT4103FP

IT4103FPR

C4 Virtualization 27hrs(T)93hrs(P)Credits:6Prerequisite:Nil

IT4044FP On completion of the module, students should be abletosetupahypervisorwithvirtualmachines(VMs)andconfigureclients’accesstotheseVMs.They should also be able to perform backup and recovery of VMs, monitor resource utilisationon the hypervisor, troubleshoot performanceand connectivity issues as well as assisting insecuringthevirtualisedinfrastructure.Theywillbe introduced to commercially available cloudservicesandbeabletoutilisethem.

EquivalentCode

77

S/N Module Details Module Code Module ObjectivesC5 Advanced

Networking 27hrs(T)93hrs(P)Credits:6Prerequisite:AdvisedtocompleteIT4042FP

IT5040FP On completion of the module, students should beabletoconfigureadvancedrouting,switchingand IP services, set upWANLinks, implementnetworkaccesscontrol,monitorandadministeranetwork,andtroubleshootnetworkconnectivity.


IT5104FPR






78

HIGHER NITEC IN TECHNOLOGY – MARINE & OFFSHORE TECHNOLOGYCourseCode:HTMRO

COURSE OBJECTIVEThiscourseprovidesstudentswithbroad-basedskillsandknowledgetoperformmarineandoffshorevesselfabricationworksinvolvingpreliminarydesignofpiperoutingplan,testingandinspection activities ofmachinery alignment, supervision onwelding and fabricationworks,dimension control of fabrication, assisting in system testing, commissioning, and planning of workactivities.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Quality Engineering


MR4007FP On completion of the module, students should be able to conduct preliminary safety inspection, perform hazard identification andriskassessment.Students shouldalsobeabletoverifygeneralarrangementdrawings,monitorqualitycontrolsystems,performinspectionworkon brazed joints, heat treatment of materials,cable arrangement, electrical circuits, and perform dimensional checks of engineering components.

EquivalentCodesMR4003PAMR4007PA

MR4007PAR

C2 Ship Systems 60hrs(T)60hrs(P)Credits:8Prerequisite:Nil

MR4008FP On completion of the module, students should be abletoservice,maintainpropulsioncomponentssystem, pneumatic and hydraulic control systems components; perform inspection work on deckmachinery and alignment of marine machinery.


MR4008PAR

C3 Welding Technology 60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

MR4009FP On completion of the module, students should beabletointerpretweldingprocedures,performbutt, fillet, grooveweld joints using submergedarcwelding,shieldmetalarcwelding,flux-coredarc welding, gas tungsten arc welding in flat,horizontalandverticalpositions.Studentsshouldalso be able to rectify weld defects, performnon-destructive tests on weld metals and dooperationalcalibrationofweldingmachine.


MR5006PAR

C4 Fabrication Technology 70hrs(T)50hrs(P)Credits:8Prerequisite:Nil

MR4011FP On completion of the module, students should be abletoproduce2-DCADdrawingsandsketchesof3-Dassemblydrawings.Studentsshouldalsobeable toplan resourcesandworkschedules,perform structural markings, read lines plan drawings, carry out development of plates andpipes, material surface inspections, nesting and take-off and prepare load for lifting operations.


MR5008PAR

79

S/N Module Details Module Code Module ObjectivesC5 Pipe Design and

Systems 50hrs(T)70hrs(P)Credits:7Prerequisite:Nil

MR5007FP On completion of the module, students should beable to produceP& IDdrawings, isometricdrawingsofpiperoutingplanandpreparepipescutting plans. Students should also be able toperform pipe spool assembly, dimension checks on pipe spools, and perform leak tests on piping systems.


MR5007PAR

C6 Offshore Technology 70hrs(T)50hrs(P)Credits:9Prerequisite:Nil

MR5009FP On completion of the module, students should be able to produce electrical single-line drawings,maintain DC and AC equipment, perform dimension control and level checks of offshorestructures, co-ordinate the erection of temporary supports,performleakandwatertightnesstestsand assist in system testing and commissioning.


MR5009PAR





courses will be offered in each intake. Where the modules are offered and there isinsufficientenrolment,theclasseswillbecancelledandafullrefundwillbegiventotheaffected students

80

HIGHER NITEC IN TECHNOLOGY – MECHANICAL ENGINEERINGCourseCode:HTMEC

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandtechnicalknowledgetocarryout technicalsupport functions in mechanical engineering design and operations, perform fault diagnosis andmaintenanceofinstrumentationandcontrolequipmentaswellasintegrationofmechanicalcomponents and sub-systems.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 Mathematics

and Engineering Systems 75hrs(T)45hrs(P)Credits:7Prerequisite:Nil

ME4005PAR On completion of the module, students should beabletosolveengineeringproblemsinvolvingalgebra, indices, graphs, trigonometry and statistics, and to perform electrical installation as wellasconnectpneumaticandhydrauliccontrolsystems.

EquivalentCodeME4005PA

C2 CAD and Engineering Design 45hrs(T)75hrs(P)Credits:6Prerequisite:Nil

ME4006PAR On completion of the module, students should be able to create 2D drawings of engineeringcomponents using a CAD system as well asproduce 3D solid models and also to design a mechanicalsystemcomprisingvariousmachineelements.

EquivalentCodesME4002PAME4006PA

C3 Quality Engineering 75hrs(T)45hrs(P)Credits:7Prerequisite:Nil

ME4007PAR On completion of the module, students should be abletointerprettheWorkshopSafetyandHealth(WSH)regulations,therequirementsofISO9001and14001underQualityManagementSystem,LeanSixSigma,andapplyfundamentalqualitytools and techniques for problem solving andquality inspection and also the use of precision measuring tools with statistical process controlcapabilities.


C4 Engineering Materials and Mechanics 75hrs(T)45hrs(P)Credits:7Prerequisite:Nil

ME4008PAR On completion of the module, students should be able to classify engineering materials, conduct destructiveandnon-destructivetestingandalsoable toapply the lawsandprinciplesof staticsand dynamics to design engineering systems.


C5 Instrumentation and Controls 75hrs(T)45hrs(P)Credits:7Prerequisite:Nil

ME5008PAR On completion of the module, students should be able to perform testing, calibration, fault diagnosis and maintenance of instrumentation andcontrolequipment,andtoperformsizingandselectionofcomponentsforfluidsystems.


81


Development and Applications 45hrs(T)75hrs(P)Credits:6Prerequisite:AdvisedtocompleteME4006PAR

ME5009PAR On completion of the module, students should be able to carry out design and developmentactivities including applications of designconcepts for a sustainable environment, verifyproduct design, perform rapid prototyping, as wellascarryoutproductdesignchangeprocessand enhancement of product design.







82

HIGHER NITEC IN TECHNOLOGY – MECHATRONICS ENGINEERINGCourseCode:HTMCE

COURSE OBJECTIVEThiscourseprovidesstudentswithbroad-basedskillsandknowledgeinelectrical,electronicsandmechanical discipline to enable them to performwork involving assembling, installing,testing, commissioning and troubleshooting industrial automated equipment and systems.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 CAD and Electro-

Mechanical Practices45hrs(T)63hrs(P)Credits:6Prerequisite:Nil

MC4001FPR On completion of the module, students should be able to read, interpret and produce common geometrical and mechanical drawings usingComputer-Aided Drafting (CAD) software;use common tools and equipment to fabricate and service simple mechanical elements andassemblealuminiumprofilestructures; interpretelectrical diagram, wire-up simple electricalcontrol and power circuits and apply the basiclaws, theorems and concepts of electricalengineeringtoelectricalwork.

EquivalentCodesMC4011PAMC4001FP

C2 Industrial Electronics 54hrs(T)54hrs(P)Credits:7Prerequisite:Nil

MC4002FPR On completion of the module, students should be able to interpret, design, construct, test and troubleshoot electronic circuits which includeanalogue devices and digital componentssuch as diodes, bipolar transistors, logic gates, counters, shift registers and other integrated-circuits.


C3 Pneumatics and Automation 45hrs(T)63hrs(P)Credits:6Prerequisite:Nil

MC4003FPR On completion of the module, students should be able to apply electro-mechanical control systems,includingcommoninput/outputdevices,pneumatics and electro-pneumatics systems in industrial automation.


C4 PLC and Motor Control27hrs(T)81hrs(P)Credits:6Prerequisite:Nil

MC4004FPR On completion of the module, students should be able to apply Programmable Logic Controller (PLC)programmingtointerfaceandcontrolPLC-controlledapplicationsandtouseadvancedPLCinstructions to program PLC intelligent modules for industrial automations.


C5 Flexible Manufacturing System 54hrs(T)54hrs(P)Credits:7Prerequisite:Nil

MC5001FPR On completion of the module, students should be able to troubleshoot and maintain the sub-systemsassociatedwithaFlexibleManufacturingSystem, such as machine vision, automatedguidedvehicle,automaticstorageandretrieval,conveyor,industrialcommunicationsandvision.


83

S/N Module Details Module Code Module ObjectivesC6 Robotics and

Mechanics 84hrs(T)24hrs(P)Credits:8Prerequisite:Nil

MC5002FPR On completion of the module, students should be able to program, operate, troubleshoot and maintainaroboticsystem,andsolveengineeringproblems involving statistics, dynamics andstrength of materials.




VENUEITE College Central, ITE College West



84

HIGHER NITEC IN TECHNOLOGY – OFFSHORE & MARINE ENGINEERING DESIGNCourseCode:HTOMZ

COURSE OBJECTIVEThiscourseprovidesstudentswithbroad-basedskillsandknowledge indesigning,draftingand modelling of marine hull and structure, marine mechanical system, piping system and electricalsystemusingthelatest3DCADsoftwareandCADprogramming.

COURSE STRUCTURE


Graphics39hrs(T)81hrs(P)Credits:6Prerequisite:Nil

ED4001FP On completion of the module, students should be able to produce technical sketches, engineering detailed drawings, 3D solid modelling, andassembly drawings in accordance with ISOstandards.


C2 Offshore and Marine Structure Design 60hrs(T)60hrs(P)Credits:8Prerequisite:AdvisedtocompleteED4001FP

ED4008FP On completion of the module, students should be able to use the latest 3D CAD software toperform offshore and marine initial design and to prepare general arrangement and structural drawings in accordance to the standards andclassificationsocietyrequirements.


C3 Offshore and Marine Electrical System Design 60hrs(T)60hrs(P)Credits:6Prerequisite:AdvisedtocompleteED4001FP

ED4009FP On completion of the module, students should be abletousethelatest3DCADsoftwaretodesignelectrical system of a ship, including control and communication system, and to prepare the drawings in accordance to the standards andclassificationsocietyrequirements.


C4 Offshore and Marine Piping System Design60hrs(T)60hrs(P)Credits:8Prerequisite:AdvisedtocompleteED4001FP

ED5011FP On completion of the module, students should be able to use the latest 3D CAD softwareto design mechanical piping, marine system, life safety and fire fighting appliance of a ship,and to prepare drawings in accordance to thestandards, classification society, Safety of Lifeat Sea (SOLAS) and International MaritimeOrganization(IMO)requirements.


C5 Offshore and Marine HVAC System Design 60hrs(T)60hrs(P)Credits:6Prerequisite:AdvisedtocompleteED4001FP

ED5014FP On completion of the module, students should be able to estimate the cooling load of a ship, use the latest 3D CAD software to design air-conditioningandmechanicalventilationducting,heatingsystemandtoprepareworkingdrawingsfor ducting layouts and related pipe work inaccordance to the standards and classificationsociety requirements.



85





86

HIGHER NITEC IN TECHNOLOGY – SECURITY SYSTEM INTEGRATIONCourseCode:HTSSN

COURSE OBJECTIVEUponcompletionofthiscourse,studentsshouldbeabletomanagetheinstallation,integration,commissioningandservicingofsecuritysystems.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesC1 System

Administration and Storage60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

SY4005FP On completion of the module, students should be able to install, configure and performadministration tasks on Windows-basedoperating systems and storage systems.

EquivalentCodesSY4001FPSY4001FPR

C2 Network Technology 60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

SY4006FP On completion of the module, students should be able toplan, install, configureand troubleshootcomputer network system for the wired andwirelessLANenvironment.

EquivalentCodesEC4018PASY4002FPSY4002FPR

C3 Intrusion and Access Control 60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

SY4007FP On completion of the module, students should be able to design, maintain and troubleshoot intrusionandaccesscontrolsystemsinvarioussecurityenvironments.


C4 Video Surveillance60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

SY4008FP On completion of the module, students should be able to design, maintain and troubleshoot video surveillance system in various securityenvironments.


C5 Project Management 45hrs(T)75hrs(P)Credits:7Prerequisite:Nil

SY5004FP On completion of the module, students should be able to plan and manage security systems projects.EquivalentCodes

EC5009PASY5001FPSY5001FPR

C6 Integrated Security System Design 30hrs(T)90hrs(P)Credits:7Prerequisite:AdvisedtocompleteSY4006FP,SY4007FP&SY4008FP

SY5005FP On completion of the module, students should be able to design and integrate a security system solution to meet customers’ need andrequirements.



87



Note:1) Applicantmustbefreefromcolourappreciationdeficiencyandcriminalrecord.2) Thetrainingscheduleoflessonsissubjecttochange.3) Dependingonthedemand,notall themodulesintheCETHigher Nitec in Technology


90

NITEC IN SERVICES – BEAUTY & WELLNESS CourseCode:NSBTW/PlanCode:NSBTW

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgetoprovideafullrangeofbeautyandspatreatmentstoclientsthatwillenhancetheiroverallaestheticappearance.

COURSE STRUCTURE

S/N Module Details Module Code Module Objectives

M1 Basic Facial Treatments 40hrs(T)80hrs(P)Credits:5Prerequisite:Nil

AW2002FP On completion of the module, students should beabletoprovidebasicfacialtreatment,shapeeyebrows, and perform head, neck, décolletéand shoulder massage.

EquivalentCodesAW20260AW20320

AW20320R

M2 Make-up Applications40hrs(T)80hrs(P)Credits:6Prerequisite:Nil

AW2001FP On completion of this module, students should be able to provide different types of make-up,includingcosmeticcamouflagemake-up.

EquivalentCodesAW20310

AW20310R

M3 Manicure and Pedicure 40hrs(T)80hrs(P)Credits:5Prerequisite:Nil

AW2003FP On completion of the module, students should be abletoprovidemanicure,pedicure,handandfootmassageandparaffinhandandfoottreatment.

EquivalentCodesAW20270AW20330

AW20330R

M4 Aesthetic Therapy40hrs(T)80hrs(P)Credits:6Prerequisite:AW2002FP

AW3001FP On completion of the module, students should be able to provide advanced facial treatments,provide high frequency treatment, and providewaxingforfacialandbodyhairremoval.


AW30210R

M5 Massage Therapy40hrs(T)80hrs(P)Credits:8Prerequisite:Nil

AW3002FP On completion of the module, students should be able to provide seated chairmassage, performSwedishmassageandHotStoneMassage.EquivalentCodes

AW30220AW30220R

M6 Spa Treatments40hrs(T)60hrs(P)Credits:4Prerequisite:Nil

AW3003FP On completion of the module, students should beable toprovidebody scrub,maskandwraptreatment, thermal treatments, and hydrotherapy bathtreatmentswithVichyshower.


AW30230R Abbreviations:T–Theory,P–Practical

91


OTHER ENTRY REQUIREMENTS• PassedISC in Hairdressing


Note:1) Applicantmustattendaninterviewforadmission,andprovideaself-declarationofmedical

condition at the start of each module.2) Thetrainingscheduleoflessonsissubjecttochange.3) Dependingonthedemand,notallthemodulesintheCETNitecinServicescourseswillbe

offeredineachintake.Wherethemodulesareofferedandthereisinsufficientenrolment,theclasseswillbecancelledandafullrefundwillbegiventotheaffectedstudents.

92

NITEC IN SERVICES – BUSINESS SERVICES CourseCode:NSBSS/PlanCode:NSBSS

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgetoperformarangeofadministrativetaskstosupporttheoperationaleffectivenessandefficiencyofabusinessunit.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Customer Service


BS2002FPR On completion of the module, students should be able to display professional image and etiquette, cultivatecustomer rapport, respond to requestsand enquiries, manage needs and expectations, handle customers from diverse backgrounds,handleservicebreakdownandrecovery,provideinformationonproductsandservices,approachsales prospects and promote products and services, close a sale, and obtain customerfeedback.

EquivalentCodeBS2002FP

M2 Software Applications10hrs(T)50hrs(P)Credits:4Prerequisite:Nil

BS2003FPR On completion of the module, students should be able to produce office document usingword processing, spreadsheet and powerpointsoftware. In addition, students will be able tohandle file management and have a basicappreciation of the user level maintenance ofhardware.


M3 Fundamentals of Communication II 40hrs(T)20hrs(P)Credits:4Prerequisite:Nil

BS3001FPR On completion of the module, students should be able to apply the essential communication skillsinlistening,speaking,readingandwriting,to build good relationships in social aswell asworkplacesettings.


M4 Elements of Business50hrs(T)10hrs(P)Credits:4Prerequisite:Nil

BS3002FPR On completion of the module, students should be able to provide an overview of the generalenvironment in which businesses operate aswell as business ethics and corporate socialresponsibility.


M5 Business Event Organisation40hrs(T)20hrs(P)Credits:4Prerequisite:Nil

BS3003FPR On completion of the module, students should be able to plan an event, send invitations,handle registration and perform guest relations activities,handlethelogisticarrangementsforaneventandeventclose-downactivities.


M6 Introduction to Accounting80hrs(T)40hrs(P)Credits:5Prerequisite:Nil

BS3005FPR On completion of the module students should be able to record simple business transactions, prepare journals and ledgers, maintain pettycashandpreparetrialbalanceandfinalaccountsfor a sole-proprietorship business.



93



Note:1) Thetrainingscheduleoflessonsissubjecttochange.2) Dependingon thedemand,not all themodules in theCETNitec inServices courses


94

NITEC IN SERVICES – DIGITAL ANIMATION CourseCode:NSDAN/PlanCode:NSDANAC/NSDAN3D

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandtechnicalknowledgetoassisttheDigitalArtist,CGArtist,and/orAnimatortoprepareandperformrelatedtasksfrompre-productiondesigntodigital asset creation, animation production and post-production in 3D lighting, compositing and rendering using CGI techniques to support the media industry in their animation production.

Thiscourseprovidestraininginoneofthe2specialisations:

Asset Creation(PlanCode:NSDANAC)Thisspecialisationprovidesstudentswiththeskillsandabilityneededtocreateassetsforthemedia industry.

3D Animation(PlanCode:NSDAN3D)Thisspecialisationprovidesstudentswiththeskillsandabilityneededtoproduce3Danimationfor the media industry.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Drawing


DM2105FP On completion of the module, students should be abletoapplythefundamentalsofdrawingskills,composition and its techniques for the creation of stilllifedrawing,figuredrawing,perspective,andgesturedrawingforcharacters.

EquivalentCodesDM2013PA

DM2013PAR

M2 Classical Animation Principles30hrs(T)90hrs(P)Credits:8Prerequisite:Nil

DM2106FP On completion of the module, students should be able to apply the principles of classical animationtothedrawingofkeyposesinaction.Theyarealso trained todevelopdrawingskillsspecifically for animation through hands-onexperience inperforming in-betweensandgainknowledgeofspacingandtiming.Theyareableto animate using key poses, cut-out animation and character animation based on a dialogue with bodymechanics, gestures, lip synch, andfacial expressions. They are also trained on advanced animation principles utilizing actingto enhance the performance of the characters beinganimatedviaexperimentalanimation.

EquivalentCodeNil

M3 Animation Design and Layout12hrs(T)108hrs(P)Credits:6Prerequisite:Nil

DM2107FP On completion of the module, students should be able to apply the basic principles of form, composition, shapes and colour to create key layout and background designs. They are also trained in the creative processes for contentcreation in digital animation such as character and background designs, costume, accessories and props, etc. They are also trained to create background colour scheme, render background art and colour grading of background art.


DM2016PAR

95

S/N Module Details Module Code Module ObjectivesM4 Essentials of 3D

Animation12hrs(T)108hrs(P)Credits:5Prerequisite:Nil

DM2108FP On completion of the module, students should be able to perform basic 3D asset creation involving modelling, texturing, rigging, lightingand rendering. They are also taught the basic 3D animation such as body mechanics, animation rigs and facial animation. At the end of the module, thestudentswill understand theentire3Dproductionworkflow.

EquivalentCodeNil

AND - Choose Group A or B

Group A – Asset Creation

S/N Module Details Module Code Module ObjectivesM5A Asset Creation

12hrs(T)108hrs(P)Credits:8Prerequisite:AdvisedtocompleteDM2108FP before attempting DM3109FP

DM3109FP On completion of the module, students should be able to perform the various stages of 3Dasset creation, namely surface and polygonal modelling, creating textures and shaders, painting weights and rigs, 3D lighting and rendering.They are also taught via hands-on training inprocesses revolving the 3D environment. Atthe end of the module, the students apply the acquiredtechnicalknowledgetocreateaseriesof 3D rendered images.

EquivalentCodeNil

M6A Asset Creation Portfolio 12hrs(T)108hrs(P)Credits:6Prerequisite:Advisedto complete all the other core modules.

DM3110FP On completion of the module, students should be able to apply all the acquired knowledgethroughout the course to produce a 3D asset demo reel such as 3D model turntable, character and creature models, 3D props, hard surface and soft surface assets in their portfolio. Studentsare also trained to prepare their 3D portfolio for futureinterviewmaterials.

EquivalentCodeNil

Group B – 3D Animation

S/N Module Details Module Code Module ObjectivesM5B 3D Animation

12hrs(T)108hrs(P)Credits:8Prerequisite:AdvisedtocompleteDM2108FP before attempting DM3209FP.

DM3209FP On completion of the module, students should be able to perform the various stages in 3Danimation, namely modeling, texturing, rigging, animating, lighting and rendering. They are also taught via hands-on training in processesrevolvingthe3Denvironment.Attheendofthemodule, the students apply the acquired technical knowledgebycreatingshort3Danimationshots.


DM3203PAR

M6B 3D Animation Portfolio 12hrs(T)108hrs(P)Credits:6Prerequisite:Advisedto complete all the other core modules.

DM3210FP On completion of the module, students should be able to apply all the acquired knowledgethroughout the course to produce a 3D animation reelofcharacteranimationusingadvancedbodymechanics, pantomime, and facial animation withlipsync.Studentsarealsotrainedtopreparetheir3Dportfolioforfutureinterviewmaterials.


DM3204PAR


96



Note:1) Applicantmustbefreefromcolourappreciationdeficiency.2) Applicantwillberequiredtoattendaninterviewandpassadrawingtestforadmission.3) Thetrainingscheduleoflessonsissubjecttochange.4) Dependingon thedemand,not all themodules in theCETNitec inServices courses

willbeoffered ineach intake. Wherethemodulesareofferedandthere is insufficientenrolment, theclasseswillbecancelledanda full refundwillbegiven to theaffectedstudents.

97

NITEC IN SERVICES – PASTRY & BAKING CourseCode:NSPBK/PlanCode:NSPBK

COURSE OBJECTIVEThiscourseistoprovidestudentswiththeskillsandknowledgetoproducearangeofbreads,pastries, cakes and other dessert specialties in accordance with given recipes using theappropriate method and equipment.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Introduction to

Baking Science 52hrs(T)20hrs(P)Credits:4Prerequisite:Nil

FB2034FP On completion of this module, students should be able to process and store basic baking ingredients.

EquivalentCodesFB2001FP

FB2001FPR

M2 Pastry Basics30hrs(T)90hrs(P)Credits:5Prerequisite:Nil

FB2035FP On completion of this module, students should beabletoprepareaspecifiedrangeofdifferenttypesofpastryproducts,aswellas toprepare,evaluateandstorepastryfillings.


FB2002FPR

M3 Cake Mixing and Baking30hrs(T)90hrs(P)Credits:5Prerequisite:Nil

FB2036FP On completion of this module, students should be able to prepare, decorate and display different types of cakes.


FB2003FPR

M4 Bread Production30hrs(T)90hrs(P)Credits:5Prerequisite:Nil

FB2037FP On completion of this module, students should be able to prepare different types of bread products.EquivalentCodes

FB2004FPFB2004FPR

M5 Desserts and Petit Fours30hrs(T)90hrs(P)Credits:5Prerequisite:Nil

FB2038FP On completion of this module, students should be abletoprepareaspecifiedrangeofdessertsandpetitfours,aswellastoassembleandevaluatedesserts.


FB3001FPR

M6 Decorative Work28hrs(T)80(P)Credits:4Prerequisite:Nil

FB3020FP On completion of this module, students should be abletoperformdecorativeworkusingprinciplesof good cake design and hands-on display techniques.


FB3002FPR Abbreviations:T–Theory,P–Practical CREDITS FOR CERTIFICATIONTotal of 28 credits from successful completion of 6 modules.

OTHER ENTRY REQUIREMENTS• PassedISC in Baking Practices• PassedISCinHospitalityServices• PassedISCinFoodPreparation&Services

98


Note:1) Applicantsmustpassaninterviewandamedicalcheck-upforadmission.2) Thetrainingscheduleoflessonsissubjecttochange.3) Dependingon thedemand,not all themodules in theCETNitec inServices courses


99

NITEC IN SERVICES – RETAIL SERVICES CourseCode:NSRSS/PlanCode:NSRSS

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgetopromoteandsellmerchandise,displaymerchandise,performcashieringandservecustomersintheretailoutlet.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Fundamentals of

Communication II40hrs(T)20hrs(P)Credits:4Prerequisite:Nil

BS3001FPR On completion of the module, students should be able to apply the essential communication skills in listening,speaking,readingandwriting,to build good relationships in social as well asworkplacesettings.


M2 Customer Service 40hrs(T)20hrs(P)Credits:4Prerequisite:Nil

BS2002FPR On completion of the module, students should be able to display professional image and etiquette, cultivatecustomer rapport, respond to requestsand enquiries, manage needs and expectations, handle customers from diverse backgrounds,handleservicebreakdownandrecovery,provideinformationonproductsandservices,approachsales prospects and promote products and services, close a sale, and obtain customerfeedback.


M3 Retail and Online Selling70hrs(T)40hrs(P)Credits:5Prerequisite:Nil

RS2005FP On completion of the module, students should be able to perform sales duties by identifying the needs of the customers and applying selling techniques when handling the sales process.In addition, students are expected to be more aware of how technology is transforming theretail selling function.

EquivalentCodesRS2001FPRS2001FPR

M4 Retail Operations80hrs(T)40hrs(P)Credits:5Prerequisite:Nil

RS2006FP On completion of the module, students should be able to handle a range of core retail operations such as receiving, pricing, replenishing andcashiering.


M5 Retail Promotion and e-Marketing50hrs(T)70hrs(P)Credits:5Prerequisite:Nil

RS2007FP On completion of the module, students should be able to engage in the promotion of goods and servicesandbeawareof theextenttechnologyis transforming retail promotion and marketing landscape.


M6 Visual Merchandising50hrs(T)70hrs(P)Credits:4Prerequisite:Nil

RS3003FP On completion of the module, students should be abletodevelopbasicvisualmerchandisingskillsinexecutingavisualpresentation toenhancearetailstore’simage,service,andmerchandisetoits customers.



100





101

NITEC IN SERVICES – SPACE DESIGN (INTERIOR & EXHIBITION)CourseCode:NSSDN/PlanCode:NSSDNI

COURSE OBJECTIVE

This course provides students with the skills and technical knowledge to prepare layoutplans,constructiondrawings,presentationdrawings,illustrationsandgraphicsusingrelevantcomputersoftwareforpresentationandconstruction.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Architectural

Graphics10hrs(T)110hrs(P)Credits:6Prerequisite:Nil

SD2101FPR On completion of the module, students should be able to apply the principles of drawing andcomposition with focus on the processes andunderstandingofcreativity toproducesketchesanddrawings.

EquivalentCodesSD2001PASD2101FP

M2 Digital Building Drafting30hrs(T)90hrs(P)Credits:6Prerequisite:AdvisedtocompleteSD2101FPR

SD2102FPR On completion of the module, students should beabletoapplytheknowledgeoforthographicdrawingandarchitecturaldrawingconventionstoprepareasetofbuildingdrawingsusingrelevantcomputersoftware.


M3 Presentation Package10hrs(T)110hrs(P)Credits:6Prerequisite:Nil

SD2103FPR On completion of the module, students should be able to prepare a set of 2D and 3D building presentation drawings including virtual walk-through,usingrelevantcomputersoftware.


M4 Construction Drawing20hrs(T)100hrs(P)Credits:7Prerequisite:AdvisedtocompleteSD2101FPR&SD2102FPR

SD2104FPR On completion of the module, students should be able to draw the construction details ofstaircases, doors, windows and ceilings usingrelevantcomputersoftware.


M5 Design Elements30hrs(T)90hrs(P)Credits:7Prerequisite:AdvisedtocompleteSD2101FPR

SD3202FPR On completion of the module, students should be abletoapplyknowledgeofcurrentlocaldraftingstandards and building regulations to prepare sets of detailed drawings of floor, ceiling, wallfinishes, furnituredesignandcabinetryworkingdrawings for client'sapprovalandconstruction,usingrelevantcomputersoftware.


M6 Project 120hrs(P)Credits:7Prerequisite:Advisedto complete all other core modules

SD3204FPR On completion of the module, students should be able to apply and integrate the technical, social and methodological competencies in carrying outaprojectrelatedtotheirfieldofstudy.



102





103

NITEC IN SERVICES – TRAVEL & TOURISM SERVICESCourseCode:NSTNT/PlanCode:NSTNT

COURSE OBJECTIVEThis course provides students with the skills and knowledge to sell tourism products andservices,handlereservationsandticketing,coordinatetours,performattractionshostingandguiding,aswellaspromoteandsetupforeventstomeettherecreationalandtravelneedsofcustomers.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Introduction to

Tourism90hrs(T)30hrs(P)Credits:7Prerequisite:Nil

TS2005FP On completion of the module, students should be able to provide an overview of the tourismindustry, explain the economic, social and culturalimpactsoftourism,differentiatebetweenphysical and human geography and appreciate thetouristappealofmajortouristdestinations.

EquivalentCodeNil

M2 Customer Service and Communication60hrs(T)60hrs(P)Credits:5Prerequisite:Nil

TS2006FP On completion of this module, students should be able to apply communication skills in speaking, listening, interpreting and responding face-to-face, over the telephone and in writinginacustomerservicesetting,buildrapportwithcustomers,selltourismproductsandservicesaswellashandleservicebreakdownandrecovery.

EquivalentCodeNil

M3 Attractions Operations and Services90hrs(T)30hrs(P)Credits:7Prerequisite:Nil

TS2007FP On completion of this module, students should be able to providewarmandpersonalised servicetovisitors,handlebasicrideoperations,performattractions hosting and guiding, control crowdsandprovideassistance to visitors in distressedand emergency situations.

EquivalentCodesTS20470TS3003FPTS3003FPR

M4 Tour Operations and Ticketing60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

TS3006FP On completion of this module, students should be able to propose and sell tour packages, handle airlineandnon-airlinereservationsandticketingusingspecialisedsoftware,aswellascoordinateand facilitate inbound and outbound tours.

EquivalentCodeNil

M5 Event Promotion and Operations90hrs(T)30hrs(P)Credits:7Prerequisite:Nil

TS3007FP On completion of this module, students should be able to prepare for private and corporatefunctions in an attraction establishment, coordinate and carry out event day as well asend-of-eventlogistics.

EquivalentCodeNil


104





105

NITEC IN SERVICES – VISUAL COMMUNICATIONCourseCode:NSVSC/PlanCode:NSVSC

COURSE OBJECTIVEThis course provides students with the skills and knowledge to plan and create themosteffectivevisualsolutionstogetmessagesacross inprint,electronicandfilmmediausingavarietyofmethodssuchascolour,type,illustration,photographyandvariousprintandlayouttechniques.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Drawing

Fundamentals18hrs(T)102hrs(P)Credits:6Prerequisite:Nil

DM2005FPR On completion of the module, students should be able to apply the fundamental drawingtechniques to express their perception of forms usingvariousmediums.

EquivalentCodesDM2001PADM2005FP

M2 Design Principles36hrs(T)84hrs(P)Credits:6Prerequisite:Nil

DM2006FPR On completion of the module, students should be able to interpret design briefs and apply design elements like form, shapes, lines, colour, andtype intocompositions thatcreativelymeetclient’srequirements.


M3 Digital Imaging36hrs(T)84hrs(P)Credits:6Prerequisite:Nil

DM2008FPR On completion of the module, students should be able to create graphics and illustrations using digital imaging software. Studentswill also beable to digitally manipulate and retouch images according to the specific styles and genresrequired.


M4 Graphics and Typography18hrs(T)102hrs(P)Credits:6Prerequisite:Nil

DM3005FPR On completion of the module, students should beabletocreatepictogramsandapplyeffectivetypography onto design layouts and compositions usingsoftwareprogramme.


M5 Prepress Technology36hrs(T)84hrs(P)Credits:6Prerequisite:Nil

DM3006FPR On completion of the module, students should be abletoperformpresscheckanddevelopartworkforfinaloutputindesktoppublishing.


M6 Project18hrs(T)102hrs(P)Credits:6Prerequisite:Nil

DM3008FP On completion of the module, students should be able to carry out the design workflow andimplement a project using the knowledge andskills acquired.



106





107

NITEC IN TECHNOLOGY – AEROSPACE MACHINING TECHNOLOGYCourseCode:NTASM/PlanCode:NTASM

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgetoproduceaerospacecomponentsby planning and carrying out the operations using CAD/CAM system and multi-axis CNCmachining centres.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Engineering

Drawing and Inspection Techniques42hrs(T)78hrs(P)Credits:6Prerequisite:Nil

MT2101FP On completion of the module, students should be abletointerprettechnicaldrawingsandperformdimensional inspections for the machined componentsinaccordancewithISOstandards.

EquivalentCodeNil

M2 Engineering Process (Turning)42hrs(T)78hrs(P)Credits:6Prerequisite:Nil

MT2102FP On completion of the module, students should be abletosetupandoperatecentrelathesandCNClathes to produce components in accordance withgivenspecifications.

EquivalentCodeNil

M3 Engineering Process (Milling)42hrs(T)78hrs(P)Credits:6Prerequisite:Nil

MT2103FP On completion of the module, students should be able to set up and operate conventionalmillingmachines andCNCmillingmachines toproduce components in accordance with givenspecifications.

EquivalentCodeNil

M4 3D CAD/CAM Applications42hrs(T)78hrs(P)Credits:6Prerequisite:Nil

MT2104FP On completion of the module, students should beabletointerpretengineeringdrawings,create3DCADmodelsandgenerate&verifyCNCpartprograms using a CAD/CAM system for CNClathesandCNCmillingmachines.

EquivalentCodeMT2002PA

M5 Aerospace Machining42hrs(T)78hrs(P)Credits:6Prerequisite:AdvisedtocompleteMT2101FP, MT2102FP, MT2103FP & MT2104FP

MT3102FP On completion of the module, students should be abletodeveloppartprogramforaerospaceparts,setupandoperateCNChighspeedmachiningcentres to manufacture engine and structural aerospace parts and components.


108

S/N Module Details Module Code Module ObjectivesM6 Multi-Axis

Programming and Machining42hrs(T)78hrs(P)Credits:6Prerequisite:AdvisedtocompleteMT2101FP, MT2102FP, MT2103FP & MT2104FP

MT3103FP On completion of the module, students should beable todevelopmulti-axispartprogram,setupandoperate5-axisCNCuniversalmachiningcentres to manufacture components in a single set up for the aerospace and, oil & gas industries.


Abbreviations:T–Theory,P–Practical CREDITS FOR CERTIFICATIONTotal of 36 credits from successful completion of 6 modules.


Note:1) Thetrainingscheduleoflessonsissubjecttochange.2) Dependingonthedemand,notallthemodulesintheCETNitec in Technology courses


109

NITEC IN TECHNOLOGY – AUTOMOTIVE TECHNOLOGY (HEAVY VEHICLES)CourseCode:NTATT/PlanCode:NTATTHV

COURSE OBJECTIVEThiscourseprovidesstudentswith theskillsandknowledgeto troubleshoot,service, repairandmaintainmediumandheavycommercialvehicles.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Automotive

Principles and Systems30hrs(T)90hrs(P)Credits:4Prerequisite:Nil

AT2101FP On completion of the module, students should beabletoobserveworkplacehealthandsafety,extract technical information, select and use lifting equipment and hand tools to disassemble andreassembleautomotivecomponentsaswellastheproperdisposalofautomotivewastes.

EquivalentCodeNil

M2 Basic Chassis and Drivetrain Technology 45hrs(T)75hrs(P)Credits:8Prerequisite:Nil

AT2102FP On completion of the module, students should be able to service and replace automotivedrivetrain and chassis components likemanualtransmission clutch and brakes.

EquivalentCodeNil

M3 Basic Engine Technology 30hrs(T)90hrs(P)Credits:4Prerequisite:Nil

AT2103FP On completion of the module, students should beabletoserviceenginesystemcomponentsofspark ignition and compression ignition engines.

EquivalentCodeAT2001PA

M4 Autotronics45hrs(T)75hrs(P)Credits:8Prerequisite:Nil

AT2104FP On completion of the module, students should be able to interpret measure, diagnose and rectify faults in vehicle electrical systems, electroniccircuits and air-conditioning systems.

EquivalentCodeNil

M5 Chassis and Drivetrain Technology (Heavy Vehicles)45hrs(T)75hrs(P)Credits:8Prerequisite:AdvisedtocompleteAT2102FP

AT3202FP On completion of the module, students should be able to diagnose and rectify faults in steering, suspension,brakingsystemsaswellasdrivelinesystem components.

EquivalentCodeNil

110

S/N Module Details Module Code Module ObjectivesM6 Engine Technology

and Powertrain Management (Heavy Vehicles)45hrs(T)75hrs(P)Credits:8Prerequisite:AdvisedtocompleteAT2103FP

AT3203FP On completion of the module, students should be able to diagnose and rectify faults in engine and powertrainmanagementsystems.

EquivalentCodeNil


OTHER ENTRY REQUIREMENTS• Passed ISCinMechanicalServicing




111

NITEC IN TECHNOLOGY – AUTOMOTIVE TECHNOLOGY (LIGHT VEHICLES)CourseCode:NTATT/PlanCode:NTATTLV

COURSE OBJECTIVEThiscourseprovidesstudentswith theskillsandknowledgeto troubleshoot,service, repairandmaintain light vehicles suchaspassenger cars, vans,SportUtilityVehicles andMulti-Purpose Vehicles.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Automotive

Principles and Systems30hrs(T)90hrs(P)Credits:4Prerequisite:Nil

AT2101FP On completion of the module, students should beabletoobserveworkplacehealthandsafety,extract technical information, select and use lifting equipment and hand tools to disassemble andreassembleautomotivecomponentsaswellastheproperdisposalofautomotivewastes.

EquivalentCodeNil

M2 Basic Chassis and Drivetrain Technology 45hrs(T)75hrs(P)Credits:8Prerequisite:Nil

AT2102FP On completion of the module, students should be able to service and replace automotivedrivetrain and chassis components likemanualtransmission clutch and brakes.

EquivalentCodeNil

M3 Basic Engine Technology 30hrs(T)90hrs(P)Credits:4Prerequisite:Nil

AT2103FP On completion of the module, students should beabletoserviceenginesystemcomponentsofspark ignition and compression ignition engines.EquivalentCode

AT2001PA

M4 Autotronics45hrs(T)75hrs(P)Credits:8Prerequisite:Nil

AT2104FP On completion of the module, students should be able to interpret measure, diagnose and rectify faults in vehicle electrical systems, electroniccircuits and air-conditioning systems.

EquivalentCodeNil

M5 Chassis and Drivetrain Technology (Light Vehicles)45hrs(T)75hrs(P)Credits:8Prerequisite:AdvisedtocompleteAT2102FP

AT3102FP On completion of the module, students should be able to diagnose and rectify faults in steering, suspension,brakingsystemsaswellasdrivelinesystem components.

EquivalentCodeNil

M6 Engine Technology and Powertrain Management (Light Vehicles)45hrs(T)75hrs(P)Credits:8Prerequisite:AdvisedtocompleteAT2103FP

AT3103FP On completion of the module, students should be able to diagnose and rectify faults in engine and powertrainmanagementsystems.EquivalentCode

Nil

Abbreviations: T - Theory, P - Practical

112


OTHER ENTRY REQUIREMENTS• Passed ISCinMechanicalServicing




113

NITEC IN TECHNOLOGY – CHEMICAL PROCESS TECHNOLOGYCourseCode:NTCPZ/PlanCode:NTCPZ

COURSE OBJECTIVEThe biopharmaceuticals, chemicals and process industries in Singapore are fast growing,fuelled by international investment locally and driven by increased demand internationally. These industries comprise biologics, petrochemicals, chemicals, pharmaceuticals and process instrumentation sectors. Join us if you aspire to gain the skills set that can be applied to these sectors.

The Chemical Process Technology course offers students a broad background in skills and knowledgeforthebiopharmaceuticalsandchemicalindustries.Thecoursecombinesscienceswithengineeringconcepts.

Youcanchooseoneofthefollowingfouroptionstofurtherdevelopyourinterest:

a. Biologicsb. Petrochemicalsc. Pharmaceuticalsd. Process Instrumentation

All options can lead you for a full spectrum of varied employment opportunities in thebiopharmaceuticals, chemicals and process industries.

Someof the job titlesheldbygraduates includeProcessTechnician,OperationTechnician,Plant Maintenance Technician, Process Instrument Technician, Instrumentation Technician and EngineeringAssistant.Thereareexcellentopportunitiesforcareeradvancementtosupervisorypositionsandbeyond.Thechallengeisforstudentstopreparethemselvesbyupgradingtheirtechnicalskillsandknowledgebytakinguphigher-levelcourses.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Health, Safety,

Security and Environment Management60hrs(T)60hrs(P)Credits:6Prerequisite:Nil

CE2102FPR On completion of the module, students should be abletoapplyskillsandknowledgeinmonitoringand treating waste effluent, collect samplesandperformwater testing.Theyare taught theimportance of housekeeping, selecting and operating safety equipment, rendering first aidand responding to emergency situations; andmonitor process plant security.

EquivalentCodesCE2011

CE2002PCE2006PCE2001PACE2102FP

M2 Process Instrumentation and Control I60hrs(T)60hrs(P)Credits:8Prerequisite:Nil

CE2103FPR On completion of the module, students should be able to interpret piping and instrument diagrams and identify and locate process components. They also learn to measure and record operational parameters, perform valve by-passandswitchingoperation,isolatepipingsystembyusingblindsandinstallpackingintostuffingboxofagatevalve.


CE2003PCE2007PCE2002PACE2002PRCE2103FP

114

S/N Module Details Module Code Module ObjectivesM3 Process Equipment

and Operation60hrs(T)60hrs(P)Credits:8Prerequisite:Nil

CE2104FPR On completion of the module, students should be abletoapplyskillsandknowledgetostart-upandshut down pumps and compressors, maintainstorage facilities and commission process equipment. They also learn to monitor and controlprocessparametersaswellashandlingproducts.



M4 Processes Fundamentals and Quality Assurance60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

CE2105FPR On completion of the module, students should be able to apply principles of physics and chemical reaction to perform routine analytical testing correctly and safely. Basic knowledgeof electricity, electrical concepts and common measuring instruments are studied.

EquivalentCodesCE2101PACE2105FP

M5 Plant Processes60hrs(T)60hrs(P)Credits:5Prerequisite:AdvisedtocompleteCE2104FPR

CE3101FPR On completion of the module, students should beabletoapplyskillsandknowledgetostart-upandshutdownofboilers,reboilers,commissionvarious units like distillation columns andevaporators.



Choose ONLY one of the following modules:

M6a GMP and Biologics Processes60hrs(T)60hrs(P)Credits:8Prerequisite:AdvisedtocompleteCE2104FPR

CE3102FPR On completion of the module, students should be abletoapplyskillsandknowledgeinoperating,monitoring and controlling bioreactors, filtrationand chromatography systems.


M6b Equipment Maintenance and Utilities60hrs(T)60hrs(P)Credits:8Prerequisite:AdvisedtocompleteCE2104FPR

CE3201FPR On completion of the module, students should beabletoapplyskillsandknowledgetolubricateequipment, check pumps and compressors, prepare boilers, pumps, compressors and heat exchangersformaintenanceaswellasoperatetheUtilitiesinaprocessplant.



M6c GMP and Pharmaceutical Processes 60hrs(T)60hrs(P)Credits:8Prerequisite:AdvisedtocompleteCE2104FPR

CE3301FPR On completion of the module, students should beabletoapplyskillsandknowledgetolubricateequipment, check pumps and compressors, prepare boilers, pumps, compressors and heat exchangers for maintenance. They also learn the fundamental aspects of drug processing such asmaterials handling, purewater systemsandperform operation of the equipment used in both the primary and secondary production plants of the pharmaceutical industry.

EquivalentCodesCE3005PCE3008PCE3201PACE3301FP

115

S/N Module Details Module Code Module ObjectivesM6d Process

Instrumentation and Control II60hrs(T)60hrs(P)Credits:8Prerequisite:AdvisedtocompleteCE2103FPR

CE3401FPR On completion of the module, students should be abletoapplyskillsandknowledgeinmonitoring,calibrating process and control equipment, installing and testing a range of instrumentation and control equipment. It includes the selection and use of appropriate tools and techniques to position, connect, set and calibrate the equipment,andconnecttotherequiredservices.





Note:1) Applicantmustbefreefromcolourappreciationdeficiency.2) Thetrainingscheduleoflessonsissubjecttochange.3) Dependingondemand,notallthemodulesintheCETNitecinTechnologycourseswillbe


116

NITEC IN TECHNOLGY – ELECTRICAL TECHNOLOGY (POWER & CONTROL)CourseCode:NTELT/PlanCode:NTELTPC

COURSE OBJECTIVEThiscourseprovidesstudentswith the technicalskillsandknowledge tomaintainelectricalinstallations,equipmentandsystemsaswellastelecommunicationanddatacablingsystemsin domestic premises, commercial buildings and industrial plants according to engineering specificationsandrelevantcodesofpractice.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Electrical Circuits

and Principles60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

EE2101FPR On completion of the module, students should be able to explain the basic principles of electricity, connect simple electrical circuits and use measuring instruments to measure and monitor electrical quantities.


M2 Electrical Installations and Testing60hrs(T)60hrs(P)Credits:6Prerequisite:Nil

EE2102FPR On completion of the module, students should be able to install electrical wiring systems inresidential premises, commercial and industrial buildings in compliance with relevant localstandards, regulations and codes of practice.

EquivalentCodesEE2002PAEE2006PAEE2013PAEE2102FP

M3 Electrical Machines and Control30hrs(T)90hrs(P)Credits:5Prerequisite:Nil

EE2103FPR On completion of the module, students should beabletoinspect,operate,maintainandserviceelectrical motors including installations of variousstartersforelectricalrotatingmachines.In addition, students are also trained to select, connect, troubleshoot and rectify faults in motor control circuits.

EquivalentCodesEE2004PAEE2004PREE2008PAEE2103FP

M4 Electrical Drafting and Design18hrs(T)102hrs(P)Credits:5Prerequisite:Nil

EE2104FPR On completion of the module, students should be able touseCADsoftware toproduceelectricaldrawings and diagrams in compliance withregulations and codes of practice.

EquivalentCodesEE3004PAEE3004PREE3010PAEE2104FP

M5 Special Installations and Equipment Maintenance39hrs(T)81hrs(P)Credits:6Prerequisite:Nil

EE3101FPR On completion of the module, students should be able to diagnose and troubleshoot faults in electrical appliances and equipment, install and maintain temporary and special electrical installationsinaccordancewithcodesofpractice.

EquivalentCodesEE3017PAEE3101FP

117

S/N Module Details Module Code Module ObjectivesM6 Electrical Power

and Switchboards30hrs(T)90hrs(P)Credits:6Prerequisite:Nil

EE3102FPR On completion of the module, students should be abletoinstall,testandmaintainlowvoltage(LV)electricalswitchboardsandequipment.



OTHER ENTRY REQUIREMENTS• Passed ISC/CoCinElectricalWiring;or• Passed ISC/CoCinElectricalFitting;or• Passed ISC/CoCinElectricalMotorManufacturing;or• Passed ISC/CoCinInstrumentFitting;or• Passed ISC/CoCinLiftAdjustment&Maintenance;or• Passed ISC/CoCinLiftInstallation;or• Passed ISCinElectricalServicing.


Note:1) Applicantmustbefreefromcolourappreciationdeficiency.2) For information on application for Installer Licence, contact IMDA, Licensing Department

onTel:62111936or62111948,andonapplicationforElectricalWorkerLicence,contactEnergyMarketAuthorityonTel:68358075.

3) Depending on demand, not all the modules in the CET NitecinTechnologycourseswillbeofferedineachintake.Wherethemodulesareofferedandthereisinsufficientenrolment,theclasseswillbecancelledandafullrefundwillbegiventotheaffectedstudents.

118

NITEC IN TECHNOLOGY – ELECTRONICS, COMPUTER NETWORKING & COMMUNICATIONSCourseCode:NTECZ/PlanCode:NTECZ

COURSE OBJECTIVEThis course provides students with the skills and knowledge in installing, maintaining andservicingelectronicdevices,programmable-andmicrocontroller-controlledsystemstosupporta broad range of applications.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Electrical Principles

and Measurements60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

EC2001FP On completion of the module, students should be able to apply the basic principles of electrical and electronics to connect and test electrical circuits. They should also be able to construct prototype electronicprojectonprintedboard.


EC2101FPR

M2 Digital Electronics60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

EC2002FP On completion of the module, students should be able to interpret, construct, test and troubleshoot basic digital electronic circuits. They should also be able to construct prototype digital electronic circuits.


EC2102FPR

M3 Analogue Electronics 60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

EC2003FP On completion of the module, students should be able to interpret, construct, test and troubleshoot analogue electronic circuits. They should be able to construct prototype analogue electronic projects.


EC2103FPR

M4 Computer Networking Principles60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

EC2004FP On completion of the module, students should be abletosetupandtestwiredandwirelessLocalAreaNetworkforresourcessharing.Theyshouldalso be able to identify the various networktopologies and protocol; and troubleshootnetworkconnectivityfaults.

EquivalentCodeNil

M5 Electronic Communications System48hrs(T)72hrs(P)Credits:6Prerequisite:Nil

EC3002FP On completion of the module, students should be able to apply the knowledge and skills oninformation transmission and reception in analogue, digital and optical communication for system performance testing and maintenance.

EquivalentCodeNil


119


OTHER ENTRY REQUIREMENTS• Passed ISC/CoCinElectronicsManufacturing;or• Passed ISC/CoCinWaferFabrication.




120

NITEC IN TECHNOLOGY – FACILITY TECHNOLOGY (AIR CONDITIONING & REFRIGERATION)CourseCode:NTFCT/PlanCode:NTFCTACR

COURSE OBJECTIVEThis course provides students with the technical skills and knowledge to install, maintain,repair and service residential and commercial air-conditioning, and refrigeration systems inaccordancewith installation specifications,manufacturers’ recommendations, and statutoryrequirementsforrefrigerant,water,electricity,healthandsafety,buildingcontrolandplumbingregulationstoensuresafeandefficientoperation.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Electrical Services


CB2101FPR On completion of the module, students should be able to interpret electrical circuit diagrams, install lightingsandpowercircuitswithconduitsand trunkings, replace lightings and accessories, rectify faults in lighting and power circuits,conduct insulation resistance and continuity tests and inspect lighting protection system.

EquivalentCodesCB2005PA CB2101FP

M2 Residential Air-Conditioning Services60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

CB2103FPR On completion of the module, students should be abletofabricaterefrigerationpiping;performleaktesting,evacuationandchargingofrefrigerationsystem;routinemaintenance,partsreplacement,installand test residentialair-conditioningunits;performpreventivemaintenanceforwatercoolerand dehumidifier; troubleshoot, repair andserviceair-cooledair-conditioningequipment.


M3 Integrated Building Management Systems60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

CB3101FPR On completion of the module, students should be ableto install,diagnoseandservicethecontrolcircuitsofchilledwatersystems,inductionmotors,air-handlingunits,DirectDigitalControllers(DDC)andotherrelatedcomponents;troubleshootandrepairdefectivecomponentsofwatercooledair-conditioningequipmentandchilledwatercontrolsystem; and maintain cooling tower. They arealso trained to operate and monitor the Building AutomationSystems.


M4 Commercial Air-Conditioning Systems36hrs(T)84hrs(P)Credits:4Prerequisite:Nil

CB3202FPR On completion of the module, students should be able to install,maintain, service and repair air-cooledandwater-cooledair-conditioningsystemfor commercial applications including system usingvariablerefrigerantvolume;repaircoolingtowerassembly;interpretrefrigerationpipingandwiring circuits; replace faulty components; andperform routine and predictivemaintenance forair-conditioning equipment.


121

S/N Module Details Module Code Module ObjectivesM5 Air-Conditioning

Distribution Systems36hrs(T)84hrs(P)Credits:4Prerequisite:Nil

CB3203FPR On completion of the module, students should be able to interpret the air distribution, ducting and piping layout diagrams for air-conditioning systemsincludingductandpipesizing;installationof centrifugal pumps and piping; balancingof air and water; production of the workingdrawings;repairairhandlingunitassemblyandair distribution system; andmeasure indoor airquality.


M6 Commercial Refrigeration Systems60hrs(T)60hrs(P)Credits:6Prerequisite:Nil

CB3204FPR On completion of the module, students should be able to troubleshoot faults in refrigeration equipment; install refrigeration systems forcold storage applications including refrigeration compressorsandevaporators,capacitycontrols,operation of commercial refrigeration system, piping arrangement, defrosting methods and electricalcontrol;andreplacefaultycomponentsof commercial refrigeration equipment.



OTHER ENTRY REQUIREMENTSPassed ISCinElectricalServicing;orPassed ISCinMechanicalServicing;orPassed ISCinFacilityServices;orPassed ISCinResidentialAir-Conditioning;orPassed ISCinResidentialPlumbing;orPassed ISC in Electrical Wiring.




122

NITEC IN TECHNOLOGY – FACILITY TECHNOLOGY (MECHANICAL & ELECTRICAL SERVICES)CourseCode:NTFCT/PlanCode:NTFCTMES

COURSE OBJECTIVEThis course provides students with the technical skills and knowledge to perform first-linemaintenance work, carry out planned maintenance, and undertake servicing work on air-conditioningsystems,plumbingandsanitarysystems,firefightingandfireprotectionsystems,electricalandemergencyservices,amenities,fittingsandfixtures,wall,ceilingandfloorfinishesfor commercial, industrial, institutional and residential buildings.

COURSE STRUCTURE





M2 Mechanical Services60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

CB2102FPR On completion of the module, students should be able to interpret blueprint drawings, carryout bench-fitting work, fabricate and repairmetal components, perform shielded metal arc welding up to horizontal welding position (2G),carryout preventivemaintenanceofmachineryandengines,smalldiesel-drivengeneratorsandpumps.

EquivalentCodesCB2006PACB2102FP

M3 Residential Air-Conditioning Services 60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

CB2103FPR On completion of the module, students should be abletofabricaterefrigerationpiping;performleaktesting,evacuationandchargingofrefrigerationsystem;routinemaintenance,partsreplacement,installand test residentialair-conditioningunits;performpreventivemaintenanceforwatercoolerand dehumidifier; troubleshoot, repair andserviceair-cooledair-conditioningequipment.


M4 Piping and Plumbing Services60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

CB2104FPR On completion of the module, students should be able to maintain, troubleshoot, service,repair and fabricate domestic and industrial piping system; replace plumbing and sanitaryappliances,fittings,heaters(instantandstoragetype);andpreparepiping layoutand landscapeirrigationdrawings.

EquivalentCodesCB2008PACB2009PACB2010PACB2104FP

123

S/N Module Details Module Code Module ObjectivesM5 Fire Detection and

Protection Systems 60hrs(T)60hrs(P)Credits:6Prerequisite:Nil

CB3102FPR On completion of the module, students should be able to service and maintain fire-fightingequipment such as fire-alarm and detectionsystems, hose-reel system, automated sprinkler systems, private hydrant systems and firesuppression systems; inspect portable fireextinguishers, one and two-ways emergencyvoicecommunicationsystems in the industrial,commercial and residential buildings.


M6 Facility and System Maintenance 60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

CB3103FPR On completion of the module, students should be abletomaintainvariouscomponentsinafacilitysuchaswaterpumpingcontrolsystem,standbygenerators plus emergency lightings, audio visual system, public address system, closedcircuittelevisionsystem,accesscontrolsystem,auto door, door locks plus closers, painting and masonryworks.





Note:1) Applicantmustbefreefromcolourappreciationdeficiency.2) Thetrainingscheduleoflessonsissubjecttochange.3) Depending on demand, not all the modules in the CET NitecinTechnologycourseswillbe


124

NITEC IN TECHNOLOGY – FACILITY TECHNOLOGY (VERTICAL TRANSPORTATION)CourseCode:NTFCT/PlanCode:NTFCTVT

COURSE OBJECTIVEThiscourseprovidesstudentswith the technical skillsandknowledge tomaintain, service,troubleshoot, repair and inspect traction lifts and escalators in residential and commercial buildingsinaccordancewithcodesofpractice,statutoryrequirementsandservicemanualstoensure that the lifts and escalators are operated safely.

COURSE STRUCTURE





M2 Mechanical Services60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

CB2102FPR On completion of the module, students should beable to interpretblueprintdrawings,carryoutbench-fitting work, fabricate and repair metalcomponents,performshieldedmetalarcweldingup to horizontal welding position (2G), carryout preventive maintenance of machinery andengines, small diesel-driven generators andpumps.


M3 Lift and Escalator Systems and Equipment Maintenance36hrs(T)84hrs(P)Credits:7Prerequisite:Nil

CB3401PAR On completion of the module, students should be able to identify and explain the operation, interpret lift drawings andmaintain, service andrepair mechanical equipment and components of liftandescalatorsystems inaccordancewith liftengineeringspecificationsandcodesofpractice.


M4 Lift and Escalator Power and Control Systems Maintenance40hrs(T)80hrs(P)Credits:7Prerequisite:Nil

CB3402PAR On completion of the module, students should be abletomaintain,serviceandrepairliftcontrollersand electrical equipment, cables, components, safety switches of lift and escalator systems inaccordancewithliftengineeringspecificationsandcodes of practice.


M5 Lift Inspection and Commissioning30hrs(T)90hrs(P)Credits:4Prerequisite:Nil

CB3403PAR On completion of the module, students should beable to inspectandevaluate theconditionofa lifthoistway,oversee thecorrect installationoflift equipment and components and carry out heat run and commissioning tests on lift systems in accordancewithliftengineeringspecificationsandcodes of practice.


125

S/N Module Details Module Code Module ObjectivesM6 Lift Maintenance

Management30hrs(T)90hrs(P)Credits:4Prerequisite:Nil

CB3404PAR On completion of the module, students should be able to troubleshoot, adjust and carry outroutine and periodic maintenance of lift systems and equipment and also identify and recommend upgradingandimprovementworkstoclients.





Note:1) Applicantmustbefreefromcolourappreciationdeficiency.2) Thetrainingscheduleoflessonsissubjecttochange.3) Depending on demand, not all the modules in the CET NitecinTechnologycourseswillbe


126

NITEC IN TECHNOLOGY – INFOCOMM TECHNOLOGYCourseCode:NTICT/PlanCode:NTICT

COURSE OBJECTIVEThiscourseequipsstudentswithskillsandknowledgetosetup,maintainandtroubleshootend-usercomputingdevices,network,serverandapplicationinahybridinfrastructureenvironmenttoensuresmoothoperationsofallinfocommhardwareandsoftwareintheorganisation.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 IT Essentials and

PC Support60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

IT2034FP On completion of the module, students should be able to set up, install and maintain computer hardwareandoperatingsystem.Theywilllearntotroubleshoothardwareandsoftwareproblems.


IT2101FPR

M2 Networking Essentials60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

IT2035FP On completion of the module, students should be abletosetup,configure,maintainandtroubleshootnetwork system, and build peer-to-peer andwireless network for small office environment.Theyshouldbeable toprovidenetworksupportandconfigurenetworkdevicessuchasswitches,routersandwirelessaccesspoints.


IT2103FPR

M3 Internetworking Technology60hrs(T)60hrs(P)Credits:7Prerequisite:AdvisedtocompleteIT2035FP

IT2036FP On completion of the module, students should be abletoconfigureandimplementroutingprotocolsused in Local Area Network (LAN) as well astroubleshoot basic routing issues.

EquivalentCodesIT3020PAIT3101FP

M4 Server Essentials60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

IT2037FP On completion of the module, students should be abletoinstall,configureandmanageadministrationofserveroperatingsystems,serversandservices.They should also be able to perform backup and recovery of systems files and configurations aswellasmonitorsystemperformance.


IT2104FPR

M5 Internet Applications24hrs(T)96hrs(P)Credits:6Prerequisite:Nil

IT3034FP On completion of this module, students should be abletoinstall,configureandmaintainwebserversandbrowsers.Theywilllearntocreatesimplewebpages using authoring tools. They should also be abletodevelopanddeploywebapplications.


IT2102FPR


127



Note:1) Thetrainingscheduleoflessonsissubjecttochange.2) Depending on demand, not all the modules in the CET NitecinTechnologycourseswillbe


128

NITEC IN TECHNOLOGY – MECHANICAL TECHNOLOGYCourseCode:NTMET/PlanCode:NTMET

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgetoperformpreventiveandpredictivemaintenance courses, maintain basic automation control systems and ensure the smooth operationofindustrialandmechanicalequipment.Italsoprovidesgroundingintheapplicationof computerised machine conditioning monitoring system and laser alignment techniques.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Industrial Piping

and Valve System48hrs(T)60hrs(P)Credits:6Prerequisite:Nil

ME2002FPR On completion of the module, students should be able to carry out minor repair and replacement offluidsupplypipesandfittingsandtomaintain,troubleshootandrepairfluidvalves.

EquivalentCodeME2002FP

M2 Machinery Maintenance48hrs(T)60hrs(P)Credits:6Prerequisite:Nil

ME2003FPR On completion of the module, students should be able to carry out a preventivemaintenanceprogramme, maintain and service bearingsand basic engineering mechanisms, lubrication systemsandmechanical transmissionsystems;liftandmoveloadssafely.


M3 Industrial Pneumatics and Hydraulics48hrs(T)60hrs(P)Credits:6Prerequisite:Nil

ME2004FPR On completion of the module, students should be able to install, maintain and troubleshoot pneumatic and hydraulic systems in plant machinery and equipment.


M4 Electro Pneumatics and Hydraulics48hrs(T)60hrs(P)Credits:6Prerequisite:AdvisedtocompleteME2004FPR

ME3001FPR On completion of the module, students should be able to install, maintain and troubleshoot electro-pneumatic and electro-hydraulic systems in plant machinery and auxiliary equipment.


M5 Machinery and Electrical System Maintenance48hrs(T)60hrs(P)Credits:6Prerequisite:AdvisedtocompleteME2003FPR

ME3002FPR On completion of the module, students should be able to maintain, troubleshoot and repair machinery, equipment and electrical accessories, connect up simple electrical circuits and carry out a planned maintenance programme.


129

S/N Module Details Module Code Module ObjectivesM6 Plant Equipment

Maintenance48hrs(T)60hrs(P)Credits:6Prerequisite:AdvisedtocompleteME2002FPR

ME3003FPR On completion of the module, students should be able to install, maintain, troubleshoot and repair air compressor system, mechanical conveyorsystemandindustrialfluidpumps.



OTHER ENTRY REQUIREMENTS• Passed ISCinMechanicalServicing;or• Passed ISCinShieldedMetalArcWelding;or• Passed ISC in Gas Tungsten Arc Welding.

VENUEITE College Central, ITE College East

Note:1) Thetrainingscheduleoflessonsissubjecttochange.2) Depending on demand, not all the modules in the CET NitecinTechnologycourseswillbe


130

NITEC IN TECHNOLOGY – MECHATRONICSCourseCode:NTMCE

COURSE OBJECTIVEThiscourseprovidesstudentswithmulti-disciplinaryskillsandknowledge to install, setup,operate,maintainandserviceindustrialautomatedproductionequipmentandsystems.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Pneumatics


MC2001FPR On completion of the module, students should be able to install, maintain and troubleshoot pneumatics, and electro-pneumatic systems.


M2 Electrical Installation48hrs(T)60hrs(P)Credits:6Prerequisite:Nil

MC2002FPR On completion of the module, students should be able to carry out installation and test of electrical trunking,andconductsystemwiringofamachinecontrol.


M3 Electronics48hrs(T)60hrs(P)Credits:6Prerequisite:Nil

MC2003FPR On completion of the module, students should be able to check and test industrial electronic components and simple electronic circuits using common test instruments; and constructprototypeelectronicprojectonprintedboard.


M4 Drives and Motor Controls48hrs(T)60hrs(P)Credits:6Prerequisite:Nil

MC3001FPR On completion of the module, students should be able to install, maintain, troubleshoot and modify AC and DC motor control circuits.


M5 Automation and Basic Robotics27hrs(T)81hrs(P)Credits:6Prerequisite:Nil

MC3002FPR On completion of the module, students should beable toprogramarobot tocarryoutspecificoperations and maintain an automated control system.


M6 PLC and Sensors Technology30hrs(T)78hrs(P)Credits:6Prerequisite:Nil

MC3003FPR On completion of the module, students should be able to carry out installations, operations and troubleshooting of programmable logic controller & sensors systems in an automated system.

EquivalentCodeMC3003FP


131


OTHER ENTRY REQUIREMENTS• Passed ISC/CoCinAutonomousMaintenance;or• Passed ISCinElectricalServicing.




132

NITEC IN TECHNOLOGY – SECURITY TECHNOLOGY CourseCode:NTSYT/PlanCode:NTSYT COURSE OBJECTIVEThiscourseprovidesstudentswithintegratedskillsandknowledgeininstalling,commissioning,troubleshooting and upgrading security systems. COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Electronics


SY2005FP On completion of the module, students should be able to explain basic principles of electricity and electronics, use electrical measuring instruments as well as to apply the operating principles ofvarious electronics components to interpret thecircuitries used in security systems.

EquivalentCodesEC2013PAEC2105PAEC2021PASY2001FP

M2 Wired and Wireless Network60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

SY2008FP On completion of the module, students should be able to install, configure and troubleshootcomputer network system for the wired andwirelessLANenvironment.

EquivalentCodesEC2022PASY2002FP

M3 Cabling Technology45hrs(T)75hrs(P)Credits:6Prerequisite:Nil

SY2007FP On completion of the module, students should be able to use cabling test equipment to perform testing and diagnosis and to certify the performanceofnetworkcables.

EquivalentCodesEC2023PASY2003FP

M4 Intrusion and Access Control Technology60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

SY3005FP On completion of the module, students should be able to design, maintain and troubleshoot intrusionandaccesscontrolsystemsinvarioussecurityenvironments.

EquivalentCodesEC3018PAEC3027PASY3002FP

M5 Surveillance Technology60hrs(T)60hrs(P)Credits:7Prerequisite:Nil

SY3006FP On completion of the module, students should be able to design, maintain and troubleshoot video surveillance system in various securityenvironments.

EquivalentCodesEC3017PAEC3028PASY3003FP



Note:1) Applicantmustbefreefromcolourappreciationdeficiencyandcriminalrecord.2) Thetrainingscheduleoflessonsissubjecttochange.3) Dependingondemand,notallthemodulesintheCETNitecinTechnologycourseswillbe


133

NITEC IN TECHNOLOGY – SOCIAL MEDIA & WEB DEVELOPMENTCourseCode:NTSWD/PlanCode:NTSWD

COURSE OBJECTIVEThis course provides students with the skills and knowledge to support development andmaintenance of interactive web content, set up andmaintenance of content managementsystemaswellas integrationof interactivemedia toensureeffective interactiveexperienceandefficientdisplayofinformation.

COURSE STRUCTURE

S/N Module Details Module Code Module ObjectivesM1 Digital Media


IT2030FP On completion of the module, students should be able to edit image and texture, using media processing techniques.

EquivalentCodeIT2030PA

M2 Web Authoring48hrs(T)72hrs(P)Credits:7Prerequisite:Nil

IT2031FP On completion of the module, students should be able to create HTML documents, design simple web pages using authoring tools and performbrowsercompatibility tests.Studentsshouldbeable to verify the web contents that meet thetechnicalprotocolsandstandards(W3C).


M3 Software Development and Programming Fundamentals39hrs(T)81hrs(P)Credits:7Prerequisite:Nil

IT2033FP On completion of the module, students should be able to analyse application requirements and develop programs for interactive and animatedapplications.


M4 Interactive Authoring21hrs(T)99hrs(P)Credits:6Prerequisite:Nil

IT3030FP On completion of the module, students should be able to develop interactive applications ondifferent platforms.


M5 Mobile Web Development21hrs(T)99hrs(P)Credits:6Prerequisite:Nil

IT3032FP On completion of the module, students should be abletodevelopanddeployresponsiveinteractivewebapplications.


M6 Interactive Application Project120hrs(P)Credits:5Prerequisite:AdvisedtocompleteIT2030FP, IT2031FP & IT3030FP

IT3033FP On completion of the module, students should be able to create, test and deploy interactiveapplicationproject.



134



Note:1) Thetrainingscheduleoflessonsissubjecttochange.2) Dependingondemand,notallthemodulesintheCETNitecinTechnologycourseswillbe


136

ISC IN ELECTRICAL WIRINGCourseCode:C4EWG

COURSE OBJECTIVEThis course provides students with the skills and knowledge to install, test and maintainelectricalcircuitsunderthesupervisionofaLicensedElectricalWorker(LEW)inresidential,commercial and industrial premises.

COURSE STRUCTURE

ITE Skills Certificate Module

Module Details Module Code Module ObjectivesElectrical Wiring 26hrs(T)100hrs(P)Credits:NAPrerequisite:Nil

EE1101FP On completion of the module, students should be able to install, test and maintain electrical circuits in residential, commercial and industrial premises under the supervision of a licensedelectricalworker.

EquivalentCodeNil

Abbreviations: T - Theory, P – Practical

AWARD OF CERTIFICATIONTheITESkillsCertificateinElectricalWiringisawardedtocandidateswhoachieveaminimumaggregatescoreof60%forboththeoryandpracticalassessments.


Note:1) Applicantmustbefreefromcolourappreciationdeficiency.2) Thetrainingscheduleoflessonsissubjecttochange.3) ThisISCcoursewillbeofferedonlyifthereissufficientdemandtoformaclass.Where

thereisinsufficientenrolment,theclass/coursewillbecancelledandafullrefundwillbegiventotheaffectedstudents.

137

ISC IN GAS TUNGSTEN ARC WELDINGCourseCode:C4TIG

COURSE OBJECTIVEThiscourseprovidesstudentswiththeskillsandknowledgetoweldferrousandnon-ferrousmetalplates,pipesandprofilesectionsinflatandhorizontalpositionsusinggastungstenarcweldingprocesstoformpermanentlyassembledstructuresinaccordancewithinternationally-accepted welding standards (ASME). Adult learners who complete this course can workindependently for construction, marine andmanufacturing companies to carry out weldingworksusingthegastungstenarcweldingprocess.

COURSE STRUCTURE


Module Details Module Code Module ObjectivesGas Tungsten Arc Welding21hrs(T)99hrs(P)Credits:NAPrerequisite:Nil

ME1101FP On completion of the module, students should be abletoweldferrousandnon-ferrousmetalplates,pipes and profile sections in flat and horizontalpositionsusinggastungstenarcweldingprocessto form permanently assembled structures in accordancewithinternationally-acceptedweldingstandards(ASME).

EquivalentCodeNil

Abbreviations:T-Theory,P–Practical

AWARD OF CERTIFICATIONTheITESkillsCertificateinGasTungstenArcWeldingisawardedtocandidateswhoachieveaminimumaggregatescoreof60%forboththeoryandpracticalassessments.

VENUEITE College Central Note:1) Thetrainingscheduleoflessonsissubjecttochange.2) ThisISCcoursewillbeofferedonlyifthereissufficientdemandtoformaclass.Where


138

ISC IN RESIDENTIAL AIR-CONDITIONINGCourseCode:C4RAC

COURSE OBJECTIVEThis course provides students with the skills and knowledge to perform simple electricalinstallation, routine maintenance, parts replacement, install and test a residential air-conditioning unit. Adult learners who had completed this course is able to work for air-conditioningcompaniestoinstallandserviceresidentialair-conditioningunits.

COURSE STRUCTURE


Module Details Module Code Module ObjectivesResidential Air-Conditioning22hrs(T)108hrs(P)Credits:NAPrerequisite:Nil

CB1101FP On completion of the module, students should be able to perform simple electrical installation, routine maintenance, parts replacement, install and test a residential air-conditioning unit.

EquivalentCodeNil

Abbreviations: T - Theory, P – Practical AWARD OF CERTIFICATIONTheITESkillsCertificateinResidentialAir-Conditioningisawardedtocandidateswhoachieveaminimumaggregatescoreof60%forboththeoryandpracticalassessments.


Note:1) Applicantmustbefreefromcolourappreciationdeficiency.2) Thetrainingscheduleoflessonsissubjecttochange.3) ThisISCcoursewillbeofferedonlyifthereissufficientdemandtoformaclass.Where


139

ISC IN RESIDENTIAL PLUMBINGCourseCode:C4RPB

COURSE OBJECTIVEThis course provides students with the skills and knowledge to install, repair and serviceresidential piping systems and fixtures of water service and sanitary plumbing systems inresidentialbuildingsinaccordancewithmanufacturers'guidelines,statutoryrequirementsandrespectivecodesofpractices.Adultlearnerswhocompletethiscourse,canworkforplumbingor building maintenance companies to install and service residential plumbing under thesupervisionofalicensedplumber.

COURSE STRUCTURE


Module Details Module Code Module ObjectivesResidential Plumbing36hrs(T)84hrs(P)Credits:NAPrerequisite:Nil

CB10130 On completion of the module, students should beable to install, repair and service residentialpipingsystemsandfixturesofwaterserviceandsanitary plumbing systems in residential buildings in accordance with manufacturers' guidelines,statutory requirements and respective codes ofpractices.

EquivalentCodeNil


AWARD OF CERTIFICATIONThe ITESkillsCertificate inResidentialPlumbing isawarded to candidateswhoachieveaminimumaggregatescoreof60%forboththeoryandpracticalassessments.


Note:1) Thetrainingscheduleoflessonsissubjecttochange.2) ThisISCcoursewillbeofferedonlyifthereissufficientdemandtoformaclass.Where


140

ISC IN SHIELDED METAL ARC WELDINGCourseCode:C4SMA

COURSE OBJECTIVEThis course provides students with the skills and knowledge to weld ferrousmetal plates,structuresandpipesinflat,horizontalandverticalpositionsusingtheshieldedmetalarcweldingprocesstoformpermanentlyassembledmetalstructuresinaccordancewithinternationally-accepted welding standards (ASME). Adult learners who complete this course can workindependently for construction, marine andmanufacturing companies to carry out weldingworksusingtheshieldedmetalarcweldingprocess.

COURSE STRUCTURE


Module Details Module Code Module ObjectivesShielded Metal Arc Welding24hrs(T)75hrs(P)Credits:NAPrerequisite:Nil

ME1102FP On completion of the module, students should beable toweld ferrousmetalplates,structuresandpipesinflat,horizontalandverticalpositionsusingtheshieldedmetalarcweldingprocesstoform permanently assembled metal structures in accordancewithinternationally-acceptedweldingstandards(ASME).

EquivalentCodeNil


AWARD OF CERTIFICATIONTheITESkillsCertificateinShieldedMetalArcWeldingisawardedtocandidateswhoachieveaminimumaggregatescoreof60%forboththeoryandpracticalassessments.


Note:1) Thetrainingscheduleoflessonsissubjecttochange.2) ThisISCcoursewillbeofferedonlyifthereissufficientdemandtoformaclass.Where


141

LOCATION OF ITE HEADQUARTERS AND COLLEGES ITE HEADQUARTERS

2AngMoKioDrive Singapore567720

Customer & Visitor CentreTel: 1800 - 2222 111Fax: 6590 2578Email: [email protected] www.ite.edu.sg

ITE COLLEGE CENTRAL2AngMoKioDriveSingapore567720

Customer & Visitor CentreTel: 6590 2211 Fax: 6590 2578www.ite.edu.sg/college_central How To Get There • NearestMRTStation:AngMoKio(NS16)andYioChuKang(NS15)• BusServicestoITEHeadquartersandITECollegeCentral SBSTransit:50,72,88and159(alightalongAngMoKioAvenue5) 45(alightalongAngMoKioAvenue10)

ITE COLLEGE EAST10SimeiAvenueSingapore486047

Customer & Visitor CentreTel: 6590 2262Fax: 6544 9111www.ite.edu.sg/college_east

How To Get There• NearestMRTStation:Expo (CG1/DT35)• BusServicestoITECollegeEast Go-Ahead: 118(alightalongSimeiAvenue) 2(alightalongUpperChangiRoad) 12(alightalongUpperChangiRoadEast) SBSTransit: 31(alightalongSimeiAvenue) 24,38(alightalongUpperChangiRoadEast)

142

ITE COLLEGE WEST1ChoaChuKangGroveSingapore688236

Customer & Visitor CentreTel: 6590 2628Fax: 6411 1022www.ite.edu.sg/college_west

How To Get There• NearestMRTStation:BukitPanjang(DT1) ChoaChuKang(NS4)• NearestLRTStation: TeckWhyeLRT(BP4)• BusServicestoITECollegeWest SBSTransit: 160(alightalongBukitBatokRoad) SMRTBuses: 67,188(alightalongChoaChuKangWay) 308,983(alightalongChoaChuKangGrove) 180,187,188,982E,985(alightalongBukitBatokRoad)

143

CET STUDENT FEEDBACK FORM

Student Particulars & Course Information

Name: NRIC/FIN:EmailAddress: Tel:Course: College:

Feedback

DateSubmitted:_______________

Pleaseattachadditionalsheetsifthereisinsufficientspaceforyourfeedback.

Thank you for your feedback

This form may take you 5 to 15 minutes to complete. Please hand in the completed formtotheCETSupervisorortheCETManagerattheCollegewhereyouarestudying.Alternatively,youmaysendtheformtoCETDivisionat2AngMoKioDrive,[email protected]. Thank you.

All information contained in this Prospectus is correct at the time of publication (1 Feb 18). ITE reserves the right to amend any part of the contents of this Prospectus without prior notice.

Not all the modules listed in this Prospectus are offered at every intake exercise.Applicants may apply only for modules that are advertised for the particular intake.

© Institute of Technical Education

2018PROSPECTUSCONTINUING EDUCATION & TRAINING

Higher Nitec Nitec ISC

2018

PR

OS

PE

CTU

S C

ON

TINU

ING

ED

UC

ATIO

N &

TRA

ININ

G

Updated 26.09.17INSTITUTE OF TECHNICAL EDUCATION

ITE PROSPECTUS 2018Main Cover: Final Layout358mmW x 250mmH X 8mmS (Open)175mmW x 250mmH (Closed)

2016 ITE CET Prospectus

Documents

Transcript of 2016 ITE CET Prospectus