2016 ASBI Annual Convention Pocket Guide · HNTB Corporation International Bridge Technologies,...

1American Segmental Bridge Institute

http://www.larsa4D.com

2 | ASBI Convention 2016

ContentsASBI CONVENTION 2016

Members 4

Convention Sponsors 5

Information 8

Schedule of Events 12

Daily Schedule

Tuesday 14

2016 Leadership Award Winners 17

Wednesday 20

Convention Center Map 26

2016 Exhibitor Showcase 28

Exhibitor Map 29

Exhibitor Directory 34

Exhibitor Showcase Profiles 37

ASBI Membership Application 45

Notes 46

2017 Convention Announcement 47

AdvertisersDoka The Formwork Experts 23Epoxy Interest Group of CRSI (EIG) 30FCC Construction Inc. Inside BackFIGG BackFinley Engineering Group, Inc. 24General Technologies, Inc. 27LARSA, Inc. Inside FrontLeader Graphic Design, Inc. 32Parsons 6US SPEC 42Watson Bowman Acme 18WSP | Parsons Brinckerhoff 10

ASBI Convention 2016 | 3

We are pleased to welcome you to the 28th Annual Convention. The program will showcase current segmental design and construction innovations, and include presentations that focus on projects in North America and abroad.

This year will feature a tour of the Gerald Desmond Bridge replacement project.

The 2016 ASBI Leadership Awards will be presented during the Tuesday luncheon by Ralph Salamie, ASBI President.

Wednesday’s luncheon will feature a presentation by Dr. Joseph L. “Joey” Hartmann, Director, Office of Bridges and Structures, FHWA.

We hope you spend some time with Exhibitors located in the Grand Ballroom. Please join us at 5:45 p.m. on Tuesday evening in the Exhibitor area for a prize drawing of 10 - $50 Visa Gift Cards.

We extend a special welcome to all accompanying spouses/guests. We hope you take advantage of the Tuesday tour of Los Angeles, Hollywood and Beverly Hills, and join us at the Welcome Reception on Tuesday evening. A complimentary spouse/guest breakfast is available Tuesday and Wednesday in the Westin’s Odessa Room from 7:00 a.m. – 8:30 a.m.

Please contact the ASBI Registration Desk if we might be of any assistance.

We are pleased that you have joined us for the 2016 ASBI Convention and enjoy your time in Long Beach!

William R. “Randy” Cox, Executive Director

William R. “Randy” Cox ASBI

4 | ASBI Convention 20164 | ASBI Convention 2015

Janssen & Spaans Engineering, Inc.

Kiewit Infrastructure West Co.

Kokosing Construction Company, Inc.

Kraemer North America, LLC

LARSA, Inc.

Leader Graphic Design, Inc.

Louisiana Department of Transportation and Development

mageba USA

Maine Department of Transportation

McElhanney Consulting Services, Inc.

McNary Bergeron & Associates

MEXPRESA

Michael Baker Corporation

Michigan Department of Transportation

Minnesota Department of Transportation

Omnipro Services, LLC

Parsons

PCL Civil Constructors, Inc.

PERI Formwork Systems, Inc.

Post-Tensioning Institute (PTI)

Precast/Prestressed Concrete Institute (PCI)

R.J. Watson, Inc.

RS&H, Inc.

Schwager Davis, Inc.

Shimmick Construction Company, Inc.

Sika Corporation

Sound Transit

Structural Technologies VSL

Strukturas DF International, Co., Ltd.

T.Y. Lin International

Texas Department of Transportation

Traylor Bros., Inc.

Unistress Corporation

VINCI Construction Grands Projets

Washington State Department of Transportation

Watson Bowman Acme

Williams Brothers Construction Co., Inc.

Williams Form Engineering Corp.

WSP | Parsons Brinckerhoff, Inc.

AECOM

American Bridge Company

Archer Western Construction, LLC

Armeni Consulting Services, LLC

Arup

Atkins

Bayshore Concrete Products Corporation

Bentley Systems, Incorporated

BERD, S.A.

Brayman Construction Corporation

California High-Speed Rail Authority

Caltrans

CH2M

Condotte America, Inc.

Connecticut Department of Transportation

Corven Engineering, Inc.

COWI North America Ltd.

Deal/Rizzani de Eccher USA, Inc.

Doka USA, Ltd.

D.S. Brown Company

Dywidag Systems International, USA, Inc. (DSI)

EFCO Corp.

Eisman & Russo

Enerpac

Epoxy Interest Group of CRSI (EIG)

FHWA, Eastern Federal Lands Highway Division

FHWA, Office of Bridge Technology

FIGG

Finley Engineering Group, Inc.

Flatiron

Florida Department of Transportation

Freyssinet, Inc.

General Technologies, Inc.

Georgia Department of Transportation

Granite Construction

HDR, Inc.

HNTB Corporation

International Bridge Technologies, Inc.

Jacobs Engineering Group, Inc.

The following Consultants, Contractors, Material Suppliers, Transportation Agencies, PCI Producer Members, and Trade Associations are ASBI members:

ASBI CONVENTION 20162016 Organizational Members


ASBI CONVENTION 2016ASBI Convention Sponsors

ASBI wishes to acknowledge the following Organizational Members as Sponsors of this year’s Convention and thank them for their continued support.

Thank YouGOLD

Bronze

www.parsons.com

Knowledge. Expertise. Resources.

Palm Jebel AliDubai, UAE

http://www.parsons.com


InformationASBI CONVENTION 2016

CONVENTION REGISTRATION DESKThe Convention Registration Desk will be open throughout the Convention. If you have any questions, please stop by the desk, the ASBI staff is eager to be of assistance.

HOTEL CHECK-OUTHotel check-out time is 11:00 a.m. so please make arrangements to have the Bell Desk hold your bags until your departure.

CELL PHONESPlease be sure to turn off your cell phone during the session. Cellular conversations and phone ringing during a presentation is very distracting to both the speaker and your colleagues.

SPECIAL MEALSIf you pre-registered for special meals, look for your ticket behind your name badge. Please present the ticket to your server at the beginning of each meal function.

PROFESSIONAL DEVELOPMENT HOURSProfessional Engineers will receive a certificate for fifteen (15) Professional Development Hours for use in meeting Professional Engineering Registration requirements. All certificates will be e-mailed after the conclusion of the Convention along with a final attendance list.

ASBI has met the standards and requirements of the Registered Continuing Education Program. Credit earned on completion of this

program will be reported to RCEP. Certificates of completion will be issued to all participants. Complaints regarding registered providers may be addressed to RCEP

at 1015 15th Street, NW, 8th Floor, Washington, DC 20005. Web site: RCEP.net.

SPEAKER POLICYIt is ASBI policy to feature only member organization presentations. Exceptions are made for case study format when held in conjunction with member presentations. This is supported by dues paying members.

SUGGESTED ATTIREConvention – Business casual is the recommended dress. The meeting rooms may be cool, so a sweater or light jacket is recommended. Name badges must be worn during all Convention events.

http://RCEP.net


Spouse/Guest Program and ASBI Hospitality SuiteSpouses and guests of Convention attendees are welcome to attend all Convention activities. A complimentary breakfast will be served to spouses and guests on Tuesday and Wednesday in the Westin's Odessa Room from 7:00 a.m. to 8:30 a.m.

Spouse/Guest TourTuesday, November 8Los Angeles, Hollywood and Beverly Hills with Lunch at the Los Angeles Farmer’s Market This is by far the best LA and Hollywood tour around! You will see all the familiar sights like the Hollywood sign, the Stars Walk of Fame, Rodeo Drive and even some stars’ homes. Your tour guide will even show you the “local” spots where the famous like to go. You will have lunch at the Los Angeles Farmers Market. We promise you won’t be disappointed!

The Los Angeles Farmers Market first opened in July 1934, it is also a historic Los Angeles landmark and tourist attraction. The Farmers Market features more than 100 restaurants, grocers, and tourist shops, and is located just south of CBS Television City. Unlike most farmers' markets, which are held only at intervals, the Farmers' Market of Los Angeles is a permanent installation and is open seven days a week. The dozens of vendors serve many kinds of food, both American cuisine from local farmers and restaurants and Los Angeles' variety of local ethnic foods.

BRIDGES: FROM INCEPTION TO INSPECTION

WSP | Parsons Brinckerho� provides a full range of services for bridges, ranging from feasibility studies and environmental permitting, through preliminary and fi nal design, to construction management, inspections and rehabilitation.

For a comprehensive approach to bridges, choose WSP | Parsons Brinckerho� .

For career opportunities visit wsp-pb.com/usa

I-95/I-295 North Interchange SE RampJacksonville, Florida

For the latest news visit: insights.wsp-pb.com

http://www.wsp-pb.com/usa


Schedule of EventsASBI CONVENTION 2016

Tuesday, November 8 (Spouse/Guest Events at the Westin)

7:00 a.m. – 8:30 a.m. Spouse/Guest Breakfast, Odessa Room

9:00 a.m. – 4:00 p.m. Spouse/Guest Tour, Hotel Lobby

LONG BEACH CONVENTION CENTER

Monday, November 7

8:00 a.m. - 10:00 a.m. Executive Committee, 203b

8:00 a.m. - 10:00 a.m. Operations & Maintenance Subcommittee, 203a

9:30 a.m. - 10:30 a.m. Coffee Service, Grand Ballroom Foyer

10:00 a.m. - 12:00 p.m. Board of Directors, 202bc

12:00 p.m. - 1:00 p.m. Board of Directors Luncheon, 201

1:00 p.m. - 3:00 p.m. Communications Committee, 202bc

1:00 p.m. - 3:00 p.m. Grouting Work Group, 203a

1:00 p.m. - 3:00 p.m. Planning and Design Subcommittee, 203b

1:00 p.m. - 4:00 p.m. Registration, Grand Ballroom Foyer

1:00 p.m. - 4:00 p.m. Exhibitor Arrival and Set Up, Grand Ballroom

1:00 p.m. - 5:00 p.m. AASHTO T-10, 202a

1:00 p.m. - 5:00 p.m. Information Management Committee, 203c

2:30 p.m. - 3:30 p.m. Coffee Service, Grand Ballroom Foyer

3:00 p.m. - 5:00 p.m. Construction Practices Work Group, 202bc

3:00 p.m. - 5:00 p.m. Membership Committee, 203b

3:00 p.m. - 10:00 p.m. Technology & Innovation Committee, 203a

5:00 p.m. - 6:00 p.m. Education Committee, 203b

6:00 p.m. - 9:00 p.m. PTI DC-40 Bridge Committee, 203b


Tuesday, November 8

7:00 a.m. - 5:00 p.m. Registration, Grand Ballroom Foyer

7:00 a.m. - 8:00 a.m. Speaker Breakfast & Orientation, 203a

7:00 a.m. - 8:30 a.m. Continental Breakfast in Exhibitor Showcase, Grand Ballroom

8:30 a.m. - 12:00 p.m. General Session, Promenade Ballroom

10:00 a.m. - 10:30 a.m. Exhibitor Showcase and Break, Grand Ballroom


Wednesday, November 9 (Spouse/Guest Events at the Westin)


12:00 p.m. - 1:15 p.m. ASBI Leadership AwardsPresenter: Ralph Salamie, ASBI President, Kiewit Infrastructure West Co., Grand Ballroom

1:30 p.m. - 5:00 p.m. General Session (con't), Promenade Ballroom

3:00 p.m. - 3:30 p.m. Exhibitor Showcase & Break, Grand Ballroom

5:00 p.m. - 6:00 p.m.

5:45 p.m.

Exhibitor Showcase, Grand Ballroom

Prize Drawing During Exhibitor Showcase6:00 p.m. - 7:00 p.m. Welcome Reception, Grand Ballroom


Wednesday, November 9

7:00 a.m. - 1:00 p.m. Registration, Grand Ballroom Foyer


8:00 a.m. - 10:00 a.m. Design Session, Promenade Ballroom

8:00 a.m. - 10:00 a.m. Construction and Maintenance Session, Promenade Ballroom

10:00 a.m. - 10:30 a.m. Exhibitor Showcase and Break, Grand Ballroom

10:30 a.m. - 12:00 p.m. International Session, Promenade Ballroom

10:30 a.m. - 12:00 p.m. Case Study: Gerald Desmond Bridge, Promenade Ballroom

12:00 p.m. - 1:15 p.m. Luncheon Presentation, Grand Ballroom“Interstate Bridges and Innovation”

Presenter: Dr. Joseph L.“Joey” Hartmann, Director, Office of Bridges and Structures, FHWA

12:00 p.m. Exhibitor Showcase Closed1:45 p.m. Bridge Tour Departs Convention Center


ASBI CONVENTION 2016Tuesday, November 8

ASBI CONVENTION 2016

LONG BEACH CONVENTION CENTER7:00 a.m. - 5:00 p.m. Registration, Grand Ballroom Foyer

7:00 a.m. - 8:00 a.m. Speaker Breakfast & Orientation, 203a


GENERAL SESSION, Promenade BallroomSession Chair: Ralph Salamie, ASBI President

Kiewit Infrastructure West Co.

8:30 a.m. Welcome Ralph Salamie, ASBI President Kiewit Infrastructure West Co.

8:30 a.m. - 9:00 a.m. Segmental Bridge Design in the United States – A Historical Perspective R. Kent Montgomery FIGG

9:00 a.m. - 9:30 a.m. Segmental Bridge Construction in the United States – Past, Present and Future John Armeni Armeni Consulting Services, LLC

9:30 a.m. - 10:00 a.m. UHPC for Segmental Bridges in Malaysia – Why Not Bring the Technology to the U.S.? Dr. Voo Yen Lei Dura Technology, Malaysia

10:00 a.m. - 10:30 a.m. Exhibitor Showcase and Break Grand Ballroom

GENERAL SESSION (con't), Promenade Ballroom Session Chair: Barton Newton, ASBI Vice President

WSP | Parsons Brinckerhoff, Inc.

10:30 a.m. - 11:00 a.m. Achieving Post-Tensioning Durability: The Value of Specifications and Training Gregory Hunsicker Structural Technologies VSL

Tuesday, November 8 (Spouse/Guest Events at the Westin)


9:00 a.m. – 4:00 p.m. Spouse/Guest Tour, Hotel Lobby


ASBI CONVENTION 2016ASBI CONVENTION 2016

11:00 a.m. - 11:30 a.m. Achieving Post-Tensioning Durability: The Value of Proper Field Performance Timothy Barry RS&H, Inc.

11:30 a.m. - 12:00 p.m. St. Croix Bridge: Construction Update and Lessons Learned Kevin Western MnDOT

12:00 p.m. - 1:15 p.m. ASBI Leadership Awards Luncheon Grand Ballroom

Presenter: Ralph Salamie, ASBI President Kiewit Infrastructure West Co.

GENERAL SESSION (con't), Promenade BallroomSession Chair: Patrick Malone, ASBI Secretary/Treasurer

PCL Civil Constructors, Inc.

1:30 p.m. - 2:00 p.m. Strategies for an On-Time/On-Budget Completion – Pearl Harbor Memorial Bridge, New Haven, CT John S. Dunham Connecticut DOT

St. Croix Bridge, Minnesota and Wisconsin

Photo Courtesy of MnDOT

Pearl Harbor Memorial Bridge, New Haven, CTPhoto Courtesy of AECOM


ASBI CONVENTION 2016Tuesday, November 8


2:00 p.m. - 2:30 p.m. California High-Speed Rail Authority– Connecting and Transforming California, Complex Structures Engineering Challenges Ofelia Alcantara and Noopur Jain California High-Speed Rail Authority

2:30 p.m. - 3:00 p.m. Bridge Deck Construction with Empty Segments Technology Pedro Pacheco BERD, S.A.

3:00 p.m. - 3:30 p.m. Exhibitor Showcase and Break Grand Ballroom

GENERAL SESSION (con't), Promenade BallroomSession Chair: Scott McNary, ASBI Executive Committee

McNary Bergeron & Associates

3:30 p.m. - 4:00 p.m. I-49 / I-220 Interchange – An Owner’s Perspective Paul Vaught LADOTD

4:00 p.m. - 4:30 p.m. Pre-Cast Piers and Footings of the New Bridge Over the Saint Lawrence River in Montreal Canada Marwan Nader T.Y. Lin International

4:30 p.m. - 5:00 p.m. Service Life Design Requirements for Alternative Project Delivery Proposals – What Owners Should Specify and Designers/Contractors Should Expect Mike Bartholomew CH2M

5:00 p.m. - 6:00 p.m.5:45 p.m.

Exhibitor Showcase, Grand Ballroom Prize Drawing During Exhibitor Showcase

6:00 p.m. - 7:00 p.m. Welcome Reception, Grand Ballroom

New Bridge Over the Saint Lawrence River, Montreal, Canada

Photo Courtesy of T.Y. Lin International


ASBI CONVENTION 2016ASBI CONVENTION 2016Leadership Award Winners


Allan BrayleyOutstanding Career Contributions Providing

Construction Engineering Services for Concrete Segmental Bridges

Philip M. HartsfieldOutstanding Career Contributions

in the Design and Delivery of Concrete Segmental Bridges

John W. Jordan, Jr.Outstanding Career Contributions

Providing Leadership in Design and Construction Support for Concrete

Segmental Bridges

R. Kent MontgomeryOutstanding Career Contributionsin the Design, Construction, and

Advancementof Concrete Segmental Bridges

Watson Bowman Acme, your strongest partner for expansion control systems.

wbacorp.com

San Francisco - Oakland Bay Bridge Custom design and manufactured Large Movement Seismic Expansion Joint System.

Convention Directory WBA-2016.indd 1 9/20/2016 1:11:00 PM

http://www.wbacorp.com


ASBI CONVENTION 2016Wednesday, November 9

LONG BEACH CONVENTION CENTER7:00 a.m. - 1:00 p.m. Registration, Grand Ballroom Foyer


DESIGN SESSION, Promenade BallroomSession Chair: John Corven, ASBI Executive Committee

Corven Engineering, Inc.

8:00 a.m. - 8:30 a.m. Innovative and Practical Uses of 4D Modeling in Segmental Bridges from Beginning to End Tim Davis and Tony Doucette McNary Bergeron & Associates

8:30 a.m. - 9:00 a.m. Design of the Houston Ship Channel Concrete Segmental Cable-Stayed Bridge John Tyler HCTRAWade Bonzon FIGG

9:00 a.m. - 9:30 a.m. ASBI Design and Construction Manual Development Patrick Malone PCL Civil Constructors, Inc. Kenneth D. Price HNTB CorporationBrawn Lausen Kiewit Infrastructure West Co.

9:30 a.m. - 10:00 a.m. Application of Seismic Isolation Devices for Segmental Bridges Carlos Mendez mageba USA


Wednesday, November 9 (Spouse/Guest Events at the Westin)




INTERNATIONAL SESSION, Promenade BallroomSession Chair: Elie Homsi, ASBI Executive Committee

Parsons

10:30 a.m. - 11:00 a.m. Design and Erection of the 3.4-Mile Long Viaduct of “Nouvelle Route du Littoral” Coastal Road in Réunion Island (France)Philippe Moine VINCI Construction Grands Projets

11:00 a.m. - 11:30 a.m. Terwillegar Park Footbridge, Alberta, CanadaDrew Micklus and Franck Chavent Freyssinet, Inc.

11:30 a.m. - 12:00 p.m. Riyadh Metro Project, Saudi Arabia Firooz PanahAECOM

CONSTRUCTION & MAINTENANCE SESSION, Promenade BallroomSession Chair: Guido Schwager, ASBI Executive Committee

Schwager Davis, Inc.

8:00 a.m. - 8:30 a.m. Update on Inspection and Rehabilitation of La Plata Cable Stayed Bridge, Puerto Rico Bob Anderson and Luis Vargas AECOM

8:30 a.m. - 9:00 a.m. Full Scale Grout Tests on Stressed 6-19 Tendons of a 40m Long Concrete Beam at VSL's Academy in Bangkok Max Meyer VSL Singapore PTE Ltd.

9:00 a.m. - 9:30 a.m. Crack Evaluation of a Large Single Cell Box Girder Bridge Dongzhou Huang Atkins

9:30 a.m. - 10:00 a.m. Construction of the Winona Bridge Crossing the Mississippi River Between Minnesota and Wisconsin John Dvorak FIGG Kevin Western MnDOT



ASBI CONVENTION 2016Wednesday, November 9

Gerald Desmond Bridge Long Beach, California

Photo Courtesy of gazettes.com

CASE STUDY, Promenade BallroomSession Chair: Mike Keever, ASBI Executive Committee

Caltrans

10:30 a.m. - 12:00 p.m. Planning, Design, and Construction of the Gerald Desmond Bridge, Long Beach, CA Contractor: Bob Schraeder SFIOwner: Duane Kenagy Port of Long BeachDesigner: Matt Carter ArupConstruction Engineer: Jeremy Johannesen McNary Bergeron & Associates

12:00 p.m. Exhibitor Showcase Closed

12:00 p.m. - 1:15 p.m. Luncheon Presentation Grand Ballroom“Interstate Bridges and Innovation”Presenter: Dr. Joseph L. “Joey” Hartmann Director, Office of Bridges and Structures, FHWA

1:30 p.m. - 5:00 p.m. Gerald Desmond Bridge Tour Convention Center Lobby

http://gazettes.com

The Formwork Experts.

It’s not just bridge pylon formwork. It’s SKE100 plus.#MoreThanFormwork

USA | 877-365-2872 | [email protected] Canada | 866-923-6629 | [email protected] www.doka.com

See us at Conexpo Booth

#G1622

Gerald Desmond Bridge, Long Beach, CA


http://www.doka.com

BRIDGING CHALLENGES WITH SOLUTIONS®

We’re searching for Senior Level Bridge Engineers, and CADDTechnicians to join our creative and innovative team.

Finley Engineering Group1589 Metropolitan Blvd, Tallahassee, FL 32308, USA

Na Morani 1750/4 Prague 2 – Nove Mesto, 12800 Czech Republic

www.finleyengineeringgroup.com +1.850.894.1600

Ironton-Russell Bridge, OH/KY

FINLEY is an Equal Opportunity Employer.Apply online atwww.finleyengineeringgroup.com

Make a difference in your career today!

finley-spread-ad-2016.indd 1 9/7/16 3:08 PM

http://www.finleyengineeringgroup.com


The Westin Long Beach Hotel333 East Ocean Blvd., Long Beach, CA 90802

888.627.8403

Hotel check-in time: 3:00 p.m. and check-out time: 11:00 a.m.

Hotel InformationASBI CONVENTION 2016

Convention Center Meeting Space(Highlighted in Yellow)

Full line Composite Bar Supports and

PT Accessories

13022 Trinity Dr. • P.O. Box 1503 • Sta�ord, Texas 77477 • Tel: (281) 240-0550 • Toll-free: (888) 255-0440Fax: (281) 240-0990 • [email protected] • www.gti-usa.net

Full line of Plastic Duct,Segmental Couplers

and Accessories

Full line of 0.5” & 0.6” EncapsulatedAnchorages

Internationally RecognizedTechnically Advanced

Innovative Products

2016 ASBI Convention Guide Ad_Print.pdf 2 9/1/16 8:34 PM

http://www.gti-usa.net


Exhibitor ShowcaseASBI CONVENTION 2016

SCHEDULE-AT-A-GLANCEPlan to visit our Exhibitor Product and Services Showcase where ASBI partners will discuss and demonstrate a wide range of complementary products, technologies, and consulting services that represents the latest and best in segmental concrete bridge design and construction.


Monday, November 7Grand Ballroom

1:00 p.m. - 4:00 p.m. Exhibitor Arrival and Set-Up

Tuesday, November 8Grand Ballroom

7:00 a.m. - 8:30 a.m. Exhibitor Showcase and Continental Breakfast with Coffee Service

10:00 a.m. - 10:30 a.m. Exhibitor Showcase and Break

3:00 p.m. - 3:30 p.m. Exhibitor Showcase and Break

5:00 p.m. - 6:00 p.m.5:45 p.m.

Exhibitor ShowcasePrize Drawings

6:00 p.m. - 7:00 p.m. Reception

Wednesday, November 9Grand Ballroom

7:00 a.m. - 8:30 a.m. Exhibitor Showcase and Continental Breakfast with Coffee Service

10:00 a.m. - 10:30 a.m. Exhibitor Showcase and Break

12:00 p.m. Exhibitor Showcase Closed

11121617181920

2122

12

34

5

67

810

EXITEXIT

EXIT

EXIT 2324

25262728

3534

33323130


ASBI CONVENTION 2016Exhibitor Showcase Floor Plan

1-2 General Technologies, Inc.3 LUSAS Bridge Analysis Software4 Epoxy Interest Group of CRSI (EIG)5 RS&H, Inc.6 BVA Hydraulics7 SOFiSTiK AG8 Wowjoint Holdings10 Freyssinet, Inc.11 Structural Technologies VSL12 MEXPRESA16 Armeni Consulting Services, LLC17 Bentley Systems, Inc.18 Watson Bowman Acme19 COWI North America20 PERI Formwork Systems, Inc.

21 Sika Corporation22 D.S. Brown Company23 Williams Form Engineering Corp.24 Doka The Formwork Experts25 Enerpac26 R.J. Watson, Inc.27 Deal/Rizzani de Eccher USA, Inc/Tensa America28 Hilman Rollers30 LARSA, Inc.31 Sumiden Wire Products Corporation32 BERD, S.A. 33 mageba USA34 Schwager Davis, Inc.35 DYWIDAG Systems International USA, Inc. (DSI)

EXHIBIT BOOTHS-AT- A-GLANCE Grand Ballroom

Main Entrance

Follow us on and

EPOXY INTEREST GROUP®

Epoxy-Coated Reinforcing Steel COST-EFFECTIVE CORROSION PROTECTION

To learn more about the many benefits of epoxy-coated reinforcing steel visit . . .

www.epoxyinterestgroup.org

40 Years of Improved and Coating Technologies.

A Better Product Using Manufacturing

http://www.epoxyinterestgroup.org

Leader Graphic Design, Inc.print A Division of Leader Graphic Design, Inc.

Interactive Twist, Inc.web

logo design

brochures

branding

websites

marketing

displays

advertisements

custom programming

We create Elegant designs with Stunning visuals

Let us give you a hand with fresh new marketing tools that leave lasting impressions.

People who demand exceptional creativity, expertise and service from their designers have made Leader Graphic Design, Inc. their choice since 1982. Association and corporate clients alike choose LGD to turn ideas into visual reality; we deliver success by building client recognition with open communication to serve as a single source consultant and designer to exceed project objectives. The people throughout Leader Graphic Design, Inc. passionately uphold the company’s reputation for creativity, integrity, client service and teamwork. Every communication challenge your business faces is an opportunity for us to assist you in achieving your goals within your marketplace.

Are you Juggling too many Projects?

Phone: 847.564.5409 • www.leadergraphics.com

http://www.leadergraphics.com



Booth No. 16Armeni Consulting Services, LLC4411 Suwanee Dam Road, Suite 850Suwanee, GA 30024John D. ArmeniTel: 770.904.4178Fax: 770.904.3671john.armeni@armeniconsulting.comwww.armeniconsulting.com

Booth No. 17Bentley Systems, Inc.510 Shotgun Road, Suite 300Sunrise, FL 33326Barbara DayTel: 919.609.7614Fax: [email protected]/bridge

Booth No. 32BERD, S.A.Edificio Olympus IAv. D. Afonso Henriques, 1462 - 2˚Brigitte RouquetTel: 351.229.399.520Fax: [email protected]

Booth No. 6BVA Hydraulics10939 N. Pomona AvenueKansas City, MO 64153Randy NuttallTel: 816.891-6390Fax: [email protected]

Booth No. 19COWI North America101 – 788 Harbourside DriveNorth Vancouver, BC V7P 3R7Kristine MajlathTel: 604.986.1222Fax: [email protected]

Booth No. 27Deal/Rizzani de Eccher USA, Inc./Tensa America1111 Kane Concourse, Suite 200Bay Harbor Islands, FL 33154Riccardo CastracaniTel: 305.866.9917Fax: [email protected], [email protected]

Booth No. 24Doka The Formwork Experts214 Gates RoadLittle Ferry, NJ 07643Bob KentTel: 877.DOKA.USAFax: [email protected]

Booth No. 22D.S. Brown Company300 East CherryNorth Baltimore, OH 45872Chris YounglessTel: 419.257.3561Fax: [email protected]

Booth No. 35DYWIDAG Systems International USA, Inc. (DSI)320 Marmon DriveBolingbrook, IL 60440Dave MartinTel: 630.739.1100Fax: [email protected]

Booth No. 25EnerpacN86 W12500 Westbrook CrossingMenomonee Falls, WI 53051Patrick GenglerTel: 262.293.1648Fax: [email protected]

EXHIBITOR DIRECTORY

mailto:[email protected]

http://www.armeniconsulting.com


http://www.bentley.com/bridge


http://www.berd.eu


http://www.bvahydraulics.com


http://www.cowi.com



http://www.rizzanideeccher.com

http://877.DOKA.USA


http://www.dokausa.com


http://www.dsbrown.com


http://www.dsiamerica.com


http://www.enerpac.com


Booth No. 4Epoxy Interest Group of CRSI (EIG)933 N. Plum GroveSchaumburg, IL 60173Danielle KleinhansTel: 630.380.5845Fax: [email protected]

Booth No. 10Freyssinet, Inc.44880 Falcon Place, Suite 100Sterling, VA 20166Marit ChasseTel: 703.378.2500Fax: [email protected]

Booth No. 1-2General Technologies, Inc.13022 Trinity DriveStafford, TX 77477Larry KrauserTel: 281.240.0550Fax: [email protected]

Booth No. 28Hilman Rollers12 Timber LaneMarlboro, NJ 07746Jeff HillTel: 732.462.6277Fax: [email protected]

Booth No. 30LARSA, Inc.68 S. Service Road, Suite 100Melville, NY 11747Ali KarakaplanJohn HornerTel: 646.532.6150Fax: [email protected]

Booth No. 3LUSAS Bridge Analysis SoftwareForge House, 66 High StreetKingston Upon ThamesSurrey KT1 1HN United KingdomPaul BelchamberTel: +44 20 8541 1999Fax: +44 20 8549 [email protected]

Booth No. 33mageba USA575 Lexington Avenue, 4th FloorNew York, NY 10022Gianni MoorTel: 212.644.3335Fax: [email protected]

Booth No. 12MEXPRESAAV Nativitas No. 429Xochimilco, D.F. Mexico 16090José-Luis QuintanaTel : +52 55 5675 7561Fax : +52 55 5676 [email protected]

Booth No. 20PERI Formwork Systems, Inc.7135 Dorsey Run RoadElkridge, MD 21075David MagnusenTel: 847.489.3394Fax: [email protected]

Booth No. 26R.J. Watson, Inc.11035 Walden AvenueAlden, NY 14004Ron WatsonTel: 716.901.7020Fax: [email protected]


http://www.epoxyinterestgroup.org


http://www.freyssinetusa.com

http://gti-usa.net

http://www.gti-usa.net


http://www.hilmanrollers.com


http://www.larsa4D.com


http://www.lusas.com


http://www.magebausa.com


http://www.mexpresa.com

http://david.magnusen

http://peri-usa.com

http://www.peri-usa.com


http://www.rjwatson.com



Booth No. 5RS&H, Inc.10748 Deerwood Park Blvd.Jacksonville, FL 32256Rita CaudellTel: 904.256.2500Fax: [email protected]

Booth No. 34Schwager Davis, Inc.198 Hillsdale AvenueSan Jose, CA 95136Guido SchwagerTel: 408.281.9300Fax: [email protected]

Booth No. 21Sika Corporation201 Polito AvenueLyndhurst, NJ 07071David White, P.E.Tel: 201.933.8800Fax: [email protected]

Booth No. 7SOFiSTiK AGBurgschmietstrasse 4090419 Nuremberg GermanyAndrea WeberTel: [email protected]

Booth No. 31Sumiden Wire Products Corporation701 Marshall Stuart DriveDickson, TN 370551412 El Pinal DriveStockton, CA 95205Jeff FeitlerTel: 209.466.8624Fax: [email protected]

Booth No. 11Structural Technologies VSL10150 Old Columbia RoadColumbia, MD 21046John CriglerTel: 410.850.7000Fax: [email protected]

Booth No. 18Watson Bowman Acme95 Pineview DriveAmherst, NY 14228Steve PabstTel: 716.691.7566Fax: [email protected]

Booth No. 23Williams Form Engineering Corp.7601 North Columbia Blvd.Portland, OR 97203Bruce JensenTel: 503.285.4548Fax: [email protected]

Booth No. 8Wowjoint Holdings1000 Bristol Street N., #17-349Newport Beach, CA 92660 Aubrye FooteTel: 949.310.9049Fax: [email protected]


http://www.rsandh.com


http://www.schwagerdavis.com

http://white.dave

http://sika-corp.com

http://www.sikausa.com


http://www.sofistik.com


http://www.sumidenwire.com


http://www.vsl.net


http://www.wbacorp.com


http://www.williamsform.com


http://www.wowjoint.com


Exhibitor Showcase ProfilesASBI CONVENTION 2016

Armeni Consulting Services, LLC Booth 16Armeni Consulting Services, LLC provides a full range of bridge construction and engineering services for owners, designers and contractors throughout the United States. Detailed contractor-style construction estimates

and project scheduling, using the latest software such as HCSS for estimating and Primavera P3 for scheduling, are the core services that we provide. We provide these services for all bridge types and specialize in marine, segmental and stay cable construction. Other services such as means and methods of temporary works, constructability reviews of preliminary and final plans, claims and disputes resolution and expert witness testimony are also offered. Armeni Consulting Services has more than twenty-five years of on-site project engineering, management and several years of estimating experience on notable bridges across the United States. We provide immediate “how to” construct knowledge to our client’s team. Armeni Consulting Services brings construction solutions to you.

Bentley Systems, Inc. Booth 17Bentley is a global leader dedicated to providing architects, engineers, geospatial professionals,

constructors, and owner-operators with comprehensive software solutions for advancing infrastructure. Founded in 1984, Bentley has more than 3,000 colleagues in over 50 countries, more than $600 million in annual revenues, and since 2008 has invested more than $1 billion in research, development, and acquisitions. www.bentley.com

BERD S.A. Booth 32BERD researches, develops and applies state-of-the-art solutions to bridge and viaducts construction methods.

Since 2006 BERD explores the OPS (Organic Prestressing System) potential.

BERD’s Movable Scaffolding Systems (cas-in-place) and Launching Gantries (precast segments) for construction of bridges and viaducts with deck lengths up to 120 meters are equipped with OPS.

Due to its accumulated experience BERD offers the possibility of building bridges with enhanced construction quality, significant cost savings and fast construction cycles.

BVA Hydraulics Booth 6BVA Industrial Hydraulics located in Kansas City, Missouri is one of the world’s leading

manufacturers of heavy duty hydraulic lifting equipment.

BVA Products have pressure ranges up to 10,000 PSI with steel and aluminum cylinder capacities of up to 1,500 Tons; manual, air, electric motor and gas/diesel engine pumps; hydraulic gear pullers, nut splitters, flange spreaders, air lifting bags, H-frame presses, bottle jacks, maintenance kits and hydraulic fittings, hoses and accessories to name a few.

COWI North America Booth 19COWI North America is a leading bridge, tunnel and marine engineering consulting group built on over

80 years of international experience. We combine sustainable innovations with global insights to create solutions that empower people and move us all forward. Our bridge group (formerly Buckland & Taylor) is recognized throughout North America and internationally as a leader in the design, evaluation, rehabilitation and construction engineering of bridges of all types and sizes.

http://www.bentley.com



Deal/Rizzani de Eccher USA, Inc./Tensa America Booth 27Rizzani de Eccher and DEAL have both placed themselves in the forefront of segmental bridge construction and supply of equipment. Rizzani de Eccher, a construction company, is a worldwide leader in the construction of pre-cast segmental bridges and Light Rail projects, with emphasis on the use of custom made equipment for the casting and erection of such projects. DEAL on the other hand, is a 100% owned subsidiary of Rizzani de Eccher, and is specialized in the design, manufacturing and supply of custom made equipment such as casting machines, straddle carriers and gantry cranes, overhead and underslung erection trusses, and all other custom made equipment that can facilitate the construction of such projects. Of note is the ability DEAL has to not only supply the contractors with equipments, but primarily to work with the contractor and find construction solutions that are “outside the box,” but within the limits of cost effective and technically feasible equipment design and manufacturing parameters.

Doka. The Formwork Experts Booth 24Formwork Concepts for All Your Construction Needs

With over 130 years’ experience Doka is one of the world’s leading full-line suppliers of innovative formwork solutions and services. What this means for you is certainty, capability and dependability in the implementation of all your construction projects.For us, the wishes and requirements of our customers are always paramount. Each and every Doka employee is committed to delivering high-performing products, systems and services so that forming operations can take place on your jobsites in a safe, fast and cost-effective way. Our advanced, highly automated production facilities ensure that we can keep you supplied with the extensive range of top-quality Doka products and services at all times. In this way, we can play a significant role in helping you carry out your construction projects profitably. All over the world, more and more construction firms are coming to rely on the long-standing experience and capability of the Doka Formwork Experts.

D.S. Brown Company Booth 22Design and manufacture engineering bridge con-

struction materials including expansion joint systems, structural bearing assemblies (elastomeric, HLMR and spherical), Cableguard elastomeric wrap (corrosion protection for bridge cables), FRP (Fiber Reinforce Polymers) and Exodermic (composite, unfilled steel grid) Bridge Decks. 1-800-848-1730 email: [email protected] www.dsbrown.com.

DYWIDAG Systems International (DSI) Booth 35A leading manufacturer and supplier of specialized construction materials and equipment including: Post-

Tensioning/Reinforcing, Stay-Cable, Geotechnical Systems, and Formwork Accessories. In addition to material supply, DSI offers the following services to the construction market, worldwide: heavy lifting, NDT and investigation, turn-key structure repairs, value-engineering and post-tensioning installation. Our mission is to provide the highest degree of technical support, customer service and superior engineered systems. Local Presence – Global Competence. Rely on DSI.

Enerpac Booth 25ENERPAC, the global leader in high force hydraulic

solutions, is exhibiting integrated systems for bridge building and rehabilitation. Whether you are constructing a signature bridge across a deep valley or lifting a national landmark for seismic retrofit, we will supply the high-force hydraulic solutions you need. ENERPAC’s broad line of standard and customized products offers the benefits of safety and efficiency to applications where high forces are required to get the job done.


http://www.dsbrown.com


EPOXY INTEREST GROUP

Epoxy Interest Group of CRSI (EIG) Booth 4The Epoxy Interest Group of CRSI is a not-for-profit trade association, promoting the use and advancing the quality

of epoxy-coated steel for concrete. The association serves the needs of specifiers, engineers, architects, fabricators and end-users with the most recent information about how and where epoxy-coated reinforcing steel is used, as well as recent technical changes, educational seminars and promotional activities. EIG members are manufacturers of coated bars and suppliers of coating products.

Freyssinet, Inc. Booth 10Freyssinet offers value added solutions, products and services including:

• Multi-Strand and Thread Bar Post-Tensioning Systems • Stay & Suspension Cable Systems • Expansion Joints, Bearings, Seismic Devices and Structural Dampers • Structural Repair/Strengthening and Monitoring Systems and Services • Heavy Lifting/Moving Solutions

Freyssinet performs as general or specialty subcontractor, and supplier of proprietary products/equipment.

General Technologies, Inc. Booth 1-2General Technologies, Inc., based in Stafford, TX manufactures the following items: Corrugated Plastic Duct: Flat for 2-4

strands & Round duct from 23mm to 145mm diameter, couplers & accessories; Heatshrink Sleeves; Grout tubing, valves & accessories; Composite Rebar Chairs from 12 -450 mm ; Slab Bolsters & Upper Slab Bolster up to 100mm; Mono & Multi-strand PT products: Zero Void Bonded Mono-strand Encapsulated Systems; SOG products; Stressing Equipment; Concrete Repair Products: Repair Anchors, Barrel Couplers.

Hilman Rollers Booth 28In the fields of bridge building and heavy construction, Hilman

Rollers offers a variety of applications for your projects to help you work smart. Whether you are transferring beams and segments, installing pilings, launching castings, or even rolling out an entire span, Hilman has the rolling system that meets your requirements. Safe, quick, and economical, Hilman Rollers’ durable high capacity, low friction designs will get the job done right the first time.

LARSA, Inc. Booth 30LARSA 4D analysis and design software from New York based LARSA, Inc. addresses the specialized needs of segmental, cable, curved, and other types of bridge structures. A standard in leading U.S. firms for

bridge design and construction analysis, LARSA 4D continually pioneers engineering technology by working closely with its clients. Staged construction with 3D nonlinearity and “4D” time effects provide a solid basis for advanced projects. The LARSA 4D Section Composer creates a platform for nonprismatic sections and composite construction. Notable recent additions to LARSA 4D are the AASHTO LRFD steel plate-girder code check module with influence surface based live load analysis, super-cable element and cable-stay bridge iterative geometry optimization.

LUSAS Bridge Analysis Software Booth 3Use LUSAS Bridge software for frequency, seismic, dynamic, nonlinear, buckling, fatigue, creep modeling, heat of hydration, prestress / post-tensioning and staged construction analysis on all bridge types. A vehicle load optimisation facility simplifies worst-case vehicle loading patterns. AASHTO and other design

codes are supported. Extensive results processing facilities are provided.



mageba USA Booth 33mageba USA is part of a leading global manufacturer

and supplier of bridge bearings, expansion joints, seismic protection devices and monitoring systems, which in recent years has contributed to the construction of major North American landmarks such as the JJ Audubon, Port Mann, Golden Ears and Deh Cho Bridges, and the Oakland Airport APM. Who we are, what we do, and where we are located can be found on our website at www.magebausa.com.

MEXPRESA Booth 12MEXPRESA develops, manufactures and provides, since 1976, the following products and services for

the construction of segmental bridges, concrete buildings, towers, tanks, earthworks and tunnels: Structural design, value and construction engineering, multistrand post-tensioning, stay cables, ground anchors, slab post-tensioning, rebar splicing (cold swage), high capacity bearings and joints, erection systems and jacking systems.

PERI Formwork Systems, Inc. Booth 20PERI is the largest manufacturer and distributor of formwork, shoring and scaffolding systems and is a skilled partner of construction

companies worldwide. With 5,400 employees in 65 countries and more than 100 stock yards across the globe, PERI provides its customers with innovative equipment solutions tailored to individual project requirements. PERI’s local sales and engineering staffs assist contractors with budgeting, design, logistics and training to realize construction projects in the most cost-effective manner possible.

R.J. Watson, Inc. Booth 26R.J. Watson designs, manufactures, and markets high load multi-rotational disc bearings, seismic isolation bearing

devices, bridge expansion joints, spray-applied bridge deck waterproofing membranes, and FRP composite systems.

RS&H, Inc. Booth 5RS&H provides fully integrated architecture, engineering, and

consulting services to help clients realize their most complex facility and infrastructure projects for land, air, and space. We are consistently ranked among the nation's top 100 design firms and have worked in over 50 countries across the globe.

Schwager Davis, Inc. Booth 34Schwager Davis (SDI) is a diversified specialty contractor. Since 1982, SDI has been committed to providing quality and innovative solutions to your post-tension and bridge erection needs. Our primary activities include design and supply of multi-strand post-

tensioning systems, structural repair and alteration of concrete structures, design and supply of erection equipment for segmental bridge construction, and design and installation of automated people mover systems for urban transportation.

Sika Corporation Booth 21Sika Corporation, Lyndhurst, NJ, is a technology leader celebrating 100 years of experience in concrete materials and restoration technology. Sika’s innovative product line includes

concrete admixtures, sealants, adhesives, corrosion inhibitors, specialty mortars, epoxy resins, structural strengthening systems, grouts, anchoring adhesives, overlays, industrial flooring, roofing systems, protective coatings and wood floor adhesive systems and installation products. Full service sales and technical offices support our customers nationwide.

http://www.magebausa.com


SOFiSTiK AG Booth 7The German company SOFiSTiK is one of the leading European suppliers of structural analysis and BIM

software and Autodesk® Industry Partner. Software solutions range from basic tools for more productive drafting to 3D analysis suites. SOFiSTiK’s Authorized Training Center BiMOTiON provides training and consulting for all aspects of implementing BIM-Workflows. www.sofistik.com.

Sumiden Wire Products Corporation Booth 31Sumiden Wire Products Corporation (SWPC) produces 7-wire strand for post-tensioning and pre-tensioning applications with two US locations: Dickson, TN and Stockton, CA. We are

also affiliated with strand producing facilities in Japan, China and Indonesia. In addition to the standard ASTM A416 7-wire prestressing steel strand, we also supply stay cable quality strand, epoxy coated strand, and indented strand along with prestressing accessories, hardware and equipment. For more information please visit our website: www.sumidenwire.com.

Structural Technologies VSL Booth 11VSL is recognized as the industry leader in providing post-tensioning and specialty reinforcement systems

that combine the reliability, durability and innovation that today’s projects demand. VSL designs, manufactures and installs systems and components for both new construction and the repair and modification of existing structures. Teams of skilled, dedicated professionals committed to industry involvement and technological advancement bring innovation to every project.

Watson Bowman Acme Booth 18Watson Bowman Acme is a leading designer and manufacturer of large movement expansion control systems for both seismic and segmentally constructed

bridge applications. Other produce offerings include a variety of small movement expansion joints, finger joints and molded steel reinforced bolt down expansion joint systems.

Williams Form Engineering Corp. Booth 23Williams Form Engineering Corporation has been providing threaded steel bars and accessories for

rock anchors, soil anchors, high capacity concrete anchors, micro piles, tie rods, tie backs, strand anchors, hollow bar anchors, post tensioning systems, and concrete forming hardware systems in the construction industry for over 80 years.

Wowjoint Holdings Booth 8Wowjoint Holdings, Inc. is a leading provider of customized heavy duty lifting and carrying machinery primarily used in such large scale

infrastructure projects such as railway, highway and bridge construction. Wowjoint’s main product lines include launching gantries, tyre trolleys, special carriers, marine hoists and special purpose equipment. The Company’s innovative design capabilities have resulted in numerous international patent grants and proprietary products. Wowjoint has extensive operational experience and long-term relationships with established blue chip customers around the world. Information on Wowjoint’s products and other relevant information are available on its website at www.wowjoint.com.

http://www.sofistik.com

http://www.sumidenwire.com

http://www.wowjoint.com

US SPEC Non-Aggregate Grouts on Bridge Projects Across the United States

WASHINGTON: Nalley Valley, Manette Bridge, SR520 Floating Bridge, SeaTac - S 200th Extension OREGON:

Tillicum Bridge MONTANA: Two Medicine River Bridge MINNESOTA: Winona Bridge, Dresbach Bridge

HAWAII: Guideway Hawaii Oahu CALIFORNIA: Folsom Dam TEXAS: West 7th over Trinity River, UTSW

Overhead Connector, Grand Parkway SH99, Keyston Lake Dam, LBJ Segment 2, SH 249 at WB 8 Connector, IH-35E COLORADO: Maroon Creek Bridge, C-470 and

Santa Fe, Proby Parkway, Shield Streeth Bridge, 6th and Federal, Pena over Picadilly, Peoria St. Bridge, I-25 and Santa Fe, Bronco Arch Bridge, Fastracks East Corridor over I-70, Pecos and I-70, I-225 and Parker Rd., Idaho

Springs Pier Caps, East Fork Salmon River Bridges, Paseo Del Norte over Jefferson, I-225 and Colfax, I-225

and Cimarron, Pine Lane Bridge

NA Grout

NA-100

Meet with a US SPEC Representative at the ASBI Convention:

Megan Lord, Business [email protected]

Bryan Smith, Technical [email protected]

www.usspec.com

US SPEC Post-Tension Grouts

High Flow, Non-Aggregate, Non-Shrink PT Grout

High Flow, Bleed Resistant, Non-Aggregate, Non-Shrink PT Grout

US SPEC’s non-aggregate grouts are designed to provide maximum flow, shrinkage compensation and extended working times in an aggregate free, thixotropic formulation. Both NA Grout and NA-100 are ideal for post-tension tendon grouting and grouting of tight clearances in areas inacces-sible with standard non-shrink grouts. For more information on these grouts, please contact a US SPEC representative or visit us online at www.usspec.com.

http://www.usspec.com


Mark the box before the appropriate Membership category. Any questions? Call (512) 523-8214.

ORGANIZATION MEMBERSHIP o Transportation Agency Membership ......................................N/C Available to federal, state, or local transportation, highway, or building

agencies. Up to five individuals can be designated by a Transportation Agency as individual members, at no additional cost.

o Associate Membership ...................................................... $1,500 Available to trade or professional associations whose members are

concerned with design or construction of concrete segmental bridges.

o Consultant Membership

o Up to ten employees .......................................................... $3,250 o More than ten employees .................................................. $6,500Dues are based on the average number of employees in the past 12 months.

Consultant Memberships are available to organizations such as professional engineers involved in the preparation of design or construction plans and specifications for concrete segmental bridges.

o Contractor Membership ...................................................$6,500 Available to contractors interested in the construction of concrete

segmental bridges.

o Material Supplier Membership .......................................$6,500 Available to organizations that supply materials and/or

material services to contractors in the construction of concrete segmental bridges.

o PCI Producer Membership ............................................. $3,250 Available to precast, prestressed concrete producers that are

PCI members.

INDIVIDUAL MEMBERSHIP o Transportation Official Membership .................................... N/C Available to individual professional employees of federal, state and local

transportation and building agencies.

o Professional Engineer Membership ................................... $95 Available to individual professional engineers, or persons deemed

qualified by the Board, or employees of an organization interested in design or construction technology of concrete segmental bridges.

ASBI dues are not a charitable donation for federal income tax purposes, but they should be deductible as a business expense.

MEMBERSHIPCATEGORY1


I hereby apply for the ASBI Membership category indicated on this page, and enclose a check made payable to the American Segmental Bridge Institute for $___________________ (in U.S. dollars only).

(See Reverse Side for Membership Dues)

Full Name

Title

Company

Address

City

State Zip Code

Country

Phone

Fax

Email Address

Web Site Address

Signature

Please provide 2-3 sentences about the products and services your company provides:

Please enclose this application form with your check for the first year’s dues and mail to:

ASBI, 142 Cimarron Park Loop, Suite F, Buda, TX 78610

MEMBERSHIPAPPLICATION1


Notes

A m e r i c a n S e g m e n t a l B r i d g e I n s t i t u t e

Join us in New York for the 2017Annual Convention!

At the New York Marriott Marquis

October 24-25

Bridge TourBayonne Bridge ProjectPhoto Courtesy of Finley Engineering Group.

http://www.asbi-assoc.org


Notes

http://www.fcc.es

http://www.fccco.es

SHAPINGTHE FUTURE

OF CONCRETESEGMENTAL

BRIDGESBridges that integrate community visions, improve quality of life, capture the spirit of the people being served, and focus on mobility and sustainability in aesthetically pleasing form.

Selmon Expressway, FLNew I-35W Bridge, MN

Sam Houston Tollway (East)Ship Channel Bridge, TX

Creating Bridges As Creating Bridges As AArrtt®®

New Winona Bridge, Connecting MN & WI

www.figgbridge.com1 800 358 3444

AirTrainJFK, NY

http://www.figgbridge.com

2016 ASBI Annual Convention Pocket Guide · HNTB Corporation International Bridge Technologies,...

Documents

Transcript of 2016 ASBI Annual Convention Pocket Guide · HNTB Corporation International Bridge Technologies,...