TECNISen.tecnoma.com/wp-content/uploads/2016/05/TECNIS-II-GB... · 2016-05-30 · TECNIS 3500 -...
Transcript of TECNISen.tecnoma.com/wp-content/uploads/2016/05/TECNIS-II-GB... · 2016-05-30 · TECNIS 3500 -...
TECNIS 3500 - 4500 - 6000
www.tecnoma.com
Chassis with optimal clearance
2 high capacity AXAIR chambers
A « self propelled » chassis conception
U profile drawbar
TECNIS 3500 - 4500 - 6000 :Yield �AXAIR suspension �Suspended boom on nitrogen accumulator + ALBATROSS suspension �Different tank capacity for autonomy �25 and 40 km/h version
Simplicity and user-friendly �Easy operating, no risk of errors, with easy safety access to the tanks �Fully enclosed jack stand in the drawbar when in work �Adaptable and adjustable drawbars to suit every hitch type
Robustness and reliability �Chassis « Self propelled » type built on double UPN profile beams �Chassis fully suspended on AXAIR to protect the structure �Rotomoulded high density polyethylene tanks with integrated anti- UV for chemical and shock resistance. �Booms fitted on suspended parallelogram
Good practice and environmentally friendly �Tanks with smooth internal walls to limit waste residues to enable easy cleaning �Equipped for efficient waste management in the aim to limit the environmental impacts �Access to GPS options for precision farming
Accuracy �DPAE regulation based on TECNOMA flow meters and precision farming ready �Return regulation circuit (NOVATOP) �Permanent boom circulation with pneumatic anti-drop system (AGP)
THE CHASSIS Robustness, comfort, crops protection, manageability « Self-propelled » type conception, the chassis of the TECNIS is designed around the wide angle steering axle. Built with double straight beams, it ensures extreme robustness, rigidity and performance from the suspension for increased stability. The chassis axle fixment is designed with the prolongation of the main chassis in mind, which also allows for perfect clearance from the drawbar to the axle to protect the crops.
The boom parallelogram system is fully suspended on nitrogen accumulators and is fitted with only one centralhigh capacity ram allowing high lift to suit every crop.
2 AXAIR high capacity chambers centrally located on the axle ensures direct suspension for increased chassis and crop protection.
The hitching U profile drawbar allows total enclosure of the jack when the Tecnis is hitched. The drawbar can be adjusted in height in the aim to suit all tractors.
The drawbar is equipped with a fixed ring as standard with optional 40 and 50 diameters, swivelling ring and spherical hitch.
Option : - Tracking and steering axle : user friendly, only linked to the tractor by a gyroscope (no mechanical or electrical link). It is driven by a proportional hydraulic valve to optimize the progressiveness and softness in the field.
Tank access with overfilling canal
Platform access
Integrated storage area in the hand wash tank
Integrated storage area included in the rinsing tank
Inside of the main tank
THE APPLICATION
TANKS
Environmental advantages from smart functional tank design Light compact and resistant tanks, Rotomoulded with high density polyethylene. Tecnoma develops pioneering plastics with high technology equipment for Rotomoulding and injection, process know-how. Smooth tank wall to limit waste residues and easy cleaning. Integrated tank into the chassis to protect all equipment
The tanks symmetrical conception insures perfect stability. Access to the tanks is done via the removable ladder with an anti-slip platform and security handrail. The smart location of the rinse tank on the lowest part of the machine allows for a very low centre of gravity to ensure a perfect stability in working conditions.
Main tank : 3500, 4500 and 6000 ℓ (with a minimum of 5 % over capacity)It is designed to optimize the rinsing, allowing minimal sump residues and ensures a perfect agitation.
�4 rotating washing nozzles : Lav’ton for complete rinsing �4 agitators for a perfect chemical mixture �A Rotomoulded anti surge baffle is built in to give strength to the tank and ensure perfect rigidity. �The increased height of the tank lid secures the operator when filling. A runoff canal protects the user in case of accidental overfilling �Dry sight gauge
Option : - Electronic Gauge
Rinsing tank : 450 and 600 ℓ Its capacity allows for a full dilution of the main tank, boom and spraying circuit for responsible waste management. A storage area is also located above it for accessories and tools.
Hand wash tank : 20 ℓAccessible even if the operating area is closed. With built in storage area
2 multi-way valves
20 Ltr induction hopper fitted with Can wash
Hand lance, hose reel and washing kit (option)
NOVAFLOW controller (option)
Autonet (option)
Rinse tank
Transfert valve
Main tank
Tractor electric circuit
Quantity of water
transferred
Quantity of spray mixture
Dose of MA
Concentra-tion
1st dilution 100 ℓ 120 ℓ 64.8 g 0.54 g/ℓ2nd dilution 50 ℓ 55 ℓ 2.7 g 0.05 g/ℓ
3nd dilution 50 ℓ 55 ℓ 0.25 g 0.005 g/ℓ
4nd dilution 50 ℓ 55 ℓ 0.01 g 0.0005 g/ℓ
Example: bottom of 20 litre tank (Autonet option)
OPERATING A conception for smart, intuitive and safe use From the implementation to the application and up to the waste management, the TECNIS performs all these operations : 2 unique multi-way valves for simple and intuitive use. This smart conception, with universal pictograms, ensures an easy use to avoid the risk of mistakes.
�The operating area is perfectly integrated into the Tecnis design and is fully protected by its security cover from the working environment �The 20 Liters low level induction hopper is fitted with a Lav’box and a rinsing gun. All the cleaning and can rinsing operations are done with clean water and can be operated when filling
2 filling modes :
�O’Clear system for the main tank filling from the rinsing tank. Hyper O’Clear with 300 l/min fast filling as standard �Filling by suction with 50 mm coupling
PumpThe self priming PTO driven pump is fully integrated into the sprayer design: high performance pump and limited dead volume.
�Piston diaphragm pump PM 500 240 ℓ/min - 15 bars (for booms < 30 m) �Piston diaphragm pump PM 700 290 ℓ/min - 15 bars (for booms ≥ 30 m)
For the operator security and the environment, TECNOMA offers specific options - Hose reel and lance : the user can rinse the outside of the sprayer after the application and before leaving the field
- Autonet for the sequential dilution : this system brings an economic and simple solution for waste management.
At the end of the field or at the end of the application, the user stops and activates the « Autonet » function. He indicates the quantity of clean water that he wants to transfer to the main tank. After that, the diluted chemicals will be sprayed on the field. This operation can be done many times with a small quantity of water (cf.Autonet chart).
Safe filling : - TECFLOW : anti-overfilling security. An anti overfilling sensor is linked to a buzzer and to the filling valve. When the tank is full, the sensor automatically closes the circuit
- NOVAFLOW : manages main and rinse tank filling. It consists of a console, a 2’’ flowmeter, a 2’’ motorized valve and a full tank sensor.
The user records the quantity required in the tank and starts the filling process. When the quantity selected is reached, the valve is automatically closed.As far as the anti-overfilling sensor is concerned, it automatically closes the valve as soon as the tank is full and whatever the quantity recorded.This personal assistant also helps the user to operate the multi-way valves by showing him the different operations.
- NOVAFLOW PA : it offers the same functionalities as the NOVAFLOW but offers more in terms of assistance by using electronically controlled valves.
- Boom cleaning without tank return.
TECTRONIC controller
NOVATOP controller
NOVATEC controller
NOVATOP VISIO controller
Variable rate application Guidance screen
Automatic boom section control
Multi grip
THE REGULATION TECTRONIC/NOVATEC/NOVATOP
The regulation, the heart of the sprayer for a quality applicationWhatever your application, TECNOMA offers, for the TECNIS range, DPAE regulation.
TECTRONIC �Regulation proportional to the forward speed (DPAE). �Only one parameter to enter : Rate/Ha
NOVATEC / NOVATOP/NOVATOP VISIO / ITOP �With the NOVATEC (canbus technology) and NOVATOP and ITOP (ISOBUS 11783 technology) both are available as DPAE regulation with flowmeter. Only one control box in the cab (touchscreen for the ITOP) integrating ll regulation, hydraulic and spraying functions. Display during the application : field, rate/ha, flow, under/over dosage, forward speed. 20 fields records : surface, volume, distance sprayed �Multi-functional joystick : all functions in your hand
Option : precision farming with GPS (guidance, automatic boom section control, and mapping)
How does the TECNOMA DPAE work.All the TECNOMA DPAE regulations work with a flowmeter. Different flows are measured through the flowmeter, insensitive to pressure, viscosity or density variation. The user just needs to program the volume/ha.
DPAE NOVATEC, NOVATOP and ITOP regulations offer a « return regulation circuit ». Thanks to this system, even if the boom sections are closed, the circuit continues to regulate, so, with accuracy and immediate effect to the chemicals being applied, pressure and flow will be maintained irrespective to the numbers of boom sections in use.
The 100 mm pressure gauge is mounted direct to the spraying circuit with return to tank to avoid blockages to ensure an accurate reading at all times.
The + NOVATOP/ITOP :
Precision farming ready with GPS ALL IN ONE BY TECNOMA �Guidance �Automatic boom sections control �Traceability �Variable rate application
Additional equipments required for GPS functions EGNOS receiver, OmniSTAR and RTK �The antenna is necessary for all options requiring a sprayer localization in the field �The signal accuracy is +/- 30 cm (DGPS), 5 to 10 cm (OMNISTAR) and from 2 to 3 cm (RTK) �The DGPS EGNOS is free of charge without subscription
Guidance software (with EGNOS receiver and NOVATOP/ITOP controller)This system is compatible with the ISOBUS NOVATOP control box. The user can see the automatic guidance bar integrated in the screen with 30 cm of accuracy as soon as the connection to the EGNOS receiver is done : ability to work with straight or curved lines.
Moreover, it’s also possible to plug on the NOVATOP another external guidance bar with LED for increased accuracy.
EGNOS antenna OMNISTAR antenna
RTK antenna
Parallelogram with suspension
L3S boom at work
Texte
Nozzle holders integrated within the boom + recirculation AGP option
PUMP ENTRY
POMPE:PUMP EXIT
Pneumatic solenoid valvesFlowmeterentry
Return �owmeter
Valve to close
the return
- Circulation with 2 �owmeters- Anti-drip with 2 diaphragms
Return calibrated
Recirculation system with AGP
Automatic boom sections control (with EGNOS receiver, NOVATOP/ITOP controller and guidance software)Automatic function to switch on/off the correct sections in the aim to spray the right zone in the field. The boom sections control is fully automatic.
Variable rate application (with EGNOS receiver, NOVATOP/ITOP controller and software guidance)This tool is very useful to follow recommendation maps in the aim to ensure farm agronomic management. This option requires farm management software.
THE BOOMS �Fitted on wide angle suspended parallelograms, all TECNOMA booms are able to work in all fields whatever the crop and conditions �Hydraulic functions by mean of electro-distributors (Hydraulic pump of 8 cm3 and 11 cm3 if steering axle) �Hydraulic pump and tank as standard equipment �All booms are equipped with stainless steel spray lines for a good longevity �The PENTAJET with anti-drop diaphragms is fitted with 4 nozzles in the NOZAL range (www.nozal.fr)
All booms are fitted with :
�Hydraulic lift by mean of suspended parallelogram on nitrogen accumulator �Tilt correction and partial fold �Variable geometry and ¾ fold (Standard from 30 m) �Albatross boom suspension
LVS, LVX and L3S booms are fitted with a main frame equipped with a specific transfer box « Anti-Yaw system ».
Option :Permanent boom circulation with AGP (AGP : pneumatic anti-drop system).With a permanent boom circulation, the distribution is done by pneumatic valves able to switch on/off all the nozzle holders with pneumatic anti-drip. Consequently, the product will circulate permanently in the boom. The return flow is calibrated and measured exactly with a return flowmeter. The user doesn’t need to calibrate the nozzles or even to specify the circulation mode selected.The only thing to indicate is the application rate.
L3S boom folded
LVS boom at work
Description 3500 4500 6000
Cha
ssis
Chassis Straight
25 km/h axle 2 ½ adjustable axles - 8 holes - 100 2 ½ adjustable axles - 10 holes - 110
40 km/h axle 2 ½ adjustable axles - 8 holes - 100 2 ½ adjustable axles - 10 holes - 110
Hydraulic and park brakes Standard on 25 km/h versionPneumatic brakes with charge correction and park brakes Standard on 40 km/h version
AXAIR Suspension. Compressor and blower StandardMechanical track adjustment 25 km/h 1,80 m to 2,25 m 1,80 m to 2 mMechanical track adjustment 40 km/h 1,80 m to 2,10 m 1,80 m to 2,25 m 2 m to 2,10 m
Tyres on 25 km/h version 12.4R46 18.4R38
Tyres on 40 km/h version 12.4R46 12.4R52 18.4R48
Dra
wba
r Fix ring drawbar 50 mm diam StandardHeight adjustment Standard
Mechanical drawbar pre-adjust, fully foldable Standard
Tank
s
Main tank polyethylene 3500 ℓ 4500 ℓ 6000 ℓDry gauge Standard
Total drain valve StandardLav’Ton 4
Hydro-injectors 4Rinsing tank polyethylene 450 ℓ 600 ℓ
Hand wash tank polyethylene 20 ℓ
Ope
ratin
g ar
ea
Multi-way valves Standard20 ℓ removable induction hopper Standard
O’Clear circuit StandardHyper O’Clear with fast filling 400 ℓ/min Standard
Piston diaphragm pump PM 500 (240 ℓ/min - 15 bars) for boom 24 and 28 mPM 700 (290 ℓ/min - 15 bars) for boom > 28/16 m
PTO driven StandardFast filling 400 ℓ/min at 540 tr/min Standard
FiltrationFilling filter 500 microns
Suction filter 365 and 594 microns2 pressure filters 365 microns
Regu
latio
n DPAE TECTRONIC / NOVATEC / NOVATOP NOVATOPJoystick with NOVATEC and NOVATOP
Distribution TECNOMA solenoid valvesManometer 100 mm Diam with circulation
Noz
zles
ho
lder
an
d no
zzle
s Nozzle holder PENTAJET with anti-drop system with diaphragmsStainless steel spray lines Standard
Nozzles 4 within the NOZAL range and 1 blind cap
Boom
s
LVS STEEL 24/12 - 28/15 - 28/16 - 30/16 - 32/17 - 33/18 - 36/18LVX ALU 28/16 - 30/16 - 32/16
L3S STEEL 32 - 35 - 36L3X 30/22/12 - 32/22/12 - 33/32/24/14 - 36/35/26/14 - 36/26/14 - 38/36/26/14
GVS STEEL 36 -38GVX ALU 36 - 38 - 40 - 42
OPTIONS
Cha
ssis
opt
ion
Wide track 1,90 to 2,25 m (40 km/h version) 2 to 2,25 m (25 km/h version)2,25 m (40 km/h version)
Pneumatic brakes on 25 km/h versionSet of 2 mud guards x
Tracking and steering axle xSOFTEC drawbar xSpecific hitching xHydraulic jack x
Ope
ratin
g op
tions
Piston diaphragm pump PM 700ILO PM 500Hose reel and hand lance x
Electronic gauge xSequential dilution AUTONET by a dedicated pump
Boom cleaning from the cab with NOVATOPNOVAFLOW and NOVAFLOW PA x
Boom
s op
tions
Working lights 2 or 4 according to the boom widthVariable geometry and ¾ fold According to the boom width
Automatic boom height adjustment at the headlands xTOPFIELD x
Boom extensions 0,5 and 1 m according to the widthSupplementary sections From 9 to 18 sections according to the boom width and circulation system
Semi-continuous circulation xPermanent boom circulation With pneumatic anti-drop system
Boom end nozzles x
GPS
opt
ions
Antenna EGNOS / OMNISTAR / RTKGuidance x
Automatic section control xExternal guidance bar x
Variable rate application xFarm mapping x
Benefits : - no deposit in the pipe lines - low volume application very accurate - nozzles blockages are considerably reduced - immediate priming at the beginning of the field - complete dilution : tank residues + water circuit volume + boom pipes
Boom Composition Total workingWidth/partial Sections Tilt
correctorVariable geometry ¾ fold Transport
width Compatibility
LVS Steel
24/12 4 /6 (option) Standard Option Option
2,55 m TECNIS 3500 4500 6000
28/15 7 Standard Option Option28/16 8 Standard Standard Standard30/16 8 Standard Standard Standard32/17 8 Standard Standard Standard33/18 8 Standard Standard Standard36/18 8 Standard Standard Standard
38/36/19 8 Standard Standard Standard
LVX Aluminium28/16 7 Standard Standard Standard
2,55 mTECNIS 3500
4500 6000
30/16 8 Standard Standard Standard32/16 8 Standard Standard Standard
L3S Steel32 8 Standard Standard Standard
2,55 m TECNIS 3500 4500 600035 10 Standard Standard Standard
36 8 Standard Standard Standard
L3X Aluminium
30/22/12 8 Standard Standard Standard
2,55 m TECNIS 3500 4500 6000
32/22/12 8 Standard Standard Standard33/32/24/14 8 Standard Standard Standard36/35/26/14 8 Standard Standard Standard
36/26/14 8 Standard Standard Standard38/36/26/14 8 Standard Standard Standard
GVS Steel36 8 Standard Standard Standard
3 m TECNIS 4500 600038 8 Standard Standard Standard
GVX Aluminium
36 8 Standard Standard Standard
3 m TECNIS 4500 6000
38 8 Standard Standard Standard40 8 Standard Standard Standard42 8 Standard Standard Standard
TECNoma SErvICES A worldwide network
Component parts, spare parts CD and NOZAL nozzles range www.nozal.fr
Dealer stamp
S.A.S. - Capital 1 174 400 euros - R.C.S. EPERNAY B 350 484 309 - 54 rue Marcel PAUL - F - 51206 EPERNAY CEDEX Tél. 33 (0)3 26 51 99 99 - Fax 33 (0)3 26 51 83 51 - Site : www.tecnoma.com - Email : [email protected]
january 2015
WEIGHT AND DIMENSIONS
Join us on
http://fr-fr.facebook.com/groupe.tecnoma
Weight on the axle
Weight on the hitching point
H1
H3
H2
L3 L1 L2
Dimensions (mm)
L1 Hitching
point / axle
L2 Axle / Boom
(rear)
L3 Hitching point /
Boom (front)
H1 Boom height
(front)
H2 Boom supports
height
H3 Parallelogram height (rear)
TECNIS 3532 LVS 5200 mm 2500 mm 900 mm 3600 mm 3700 mm 3600 mm
TECNIS 4538 L3S 5400 mm 2500 mm -900 mm 3900 mm 3800 mm 3700 mm
TECNIS 6038 L3S
5700 ou 6000 mm 2500 mm -1600 mm 3995 mm 3700 mm 3700 mm
Weight and load transfer
Total weight (empty) Boom position Load on axle
(empty)
Load on hitching point
(empty)
Load on axle (full)
Load on hitching point
(full)TECNIS 3532
LVS / 13.6R48 4607 kgFolded 3700 kg 907 kg 6285 kg 2224 kg
unfolded 4124 kg 483 kg 6991 kg 1518 kgTECNIS 4538 L3S / 20.8R42 5084 kg
Folded 4430 kg 654 kg 7610 kg 2260 kgunfolded 4846 kg 238 kg 8036 kg 1834 kg
TECNIS 6038 L3S / 18.4R46 5314 kg
Folded 4580 kg 734 kg 8905 kg 2788 kgunfolded 5023 kg 291 kg 9278 kg 2415 kg
Variable according to the parallelogram position