2015 PRICE LIST - Industrial & Commercial Custom Air Filters price book reduced.pdf · Thickness:...
Transcript of 2015 PRICE LIST - Industrial & Commercial Custom Air Filters price book reduced.pdf · Thickness:...
PRICE LIST TO ORDER:
CALL TOLL FREE: 1-800-882-8012
EMAIL: [email protected]
FAX: 1-847-434-1429
OFFICE HOURS: 8:00 AM - 4:30 PM CST
AIR FILTRATION PRODUCTS
WWW.PERMATRON.COM
Celebrating Over 50 Years 1957 2015
Washable
Electrostatic
Metal Mesh 3-Dimensional Air Intake
Screen
Experts in Effective Air Filtration Solutions...
Permatron’s Capabilities—
OEM & Custom Filters Design assistance Prototype Production of finished goods
Prefilters & Protective Screens Woven synthetics, non-woven synthetics, foam, expanded metal mesh, wire cloth, impregnated
media Built to specification
Washable Filters Woven electrostatic media options with various filtration efficiencies and airflow resistance levels Metal mesh filters Framing in stainless, galvanized and painted steel, aluminum, molded plastic, flexible vinyl or
elastic edged, sonic welded and cut-to-fit
Odor & Fume Adsorption Activated carbons, zeolite, anti-microbial, activated aluminum, potassium carbonates, silica gel Panels, pleats, pads, high density packs in steel or beverage board frames, carbon filled trays for
V-bank housing
Media & Media Fabrication Bulk media, metals, cut-to-size pads, service rolls Slitting, piece cutting, product assembly
Extended Surface Filters High, medium and low efficiency non-woven media Pleats, bags, rigid filters
TECHNICAL ASSISTANCE
1-800-882-8012 or [email protected]
Permatron’s Product Applications
Corrosive Environments Mass Transit Cars
Marine Environments Telecommunications Enclosures
Scientific Equipment HVAC Systems
Chiller Equipment Laboratory Equipment
Condenser Protection Portable Air Cleaners
Heavy Particulate Processing Electronic Air Cleaners
Food Processing Equipment PTAC Units
Restaurant Equipment Air Conditioners
Ice Makers Split Duct Units
Transportation Vehicles EMI/RFI Shielding
PERMATRON CORPORATION
PRICE BOOK / ORDERING INFORMATION HOW TO ORDER
When ordering Permatron filters, the following information should be conveyed:
Give the complete BILL TO and SHIP TO address and any special labeling instructions. We request a PO NUMBER or the NAME of the individual
ordering.
Indicate QUANTITY, MODEL (see pricing pages for model names), and FILTER SIZE. Specify EXACT or NOMINAL.
Indicate filter thickness (i.e. 1/4”, 1/2”, 1”, or 2”). 1/2” models use 1” SPECIAL SIZE pricing
Indicate additional items you wish noted on the order, such as wire reinforcement or stainless steel frames, etc.
Unless otherwise specified, all small shipments will go ground service. Shipments required by truck are sent by the carrier of choice. FedEx
charges an additional $15.00 for overnight pickups.
To keep lead times short, custom orders must be revised or cancelled within 24 hours of ordering or you will incur materials and labor
costs.
Minimum order amount $50.00 may apply to custom products
Filters under 8” on either dimension will incur a $16.50 handcut charge
FILTER SIZING
Nominal Filters: All standard sizes and any custom whole number size requested, are undersized 1/2” less than the stated size.
Exact filters: FRACTIONAL SIZES cut to your specifications. All sizes containing a fraction are cut exact.
Thickness: Most filters are available in 1/8”, 1/4”, 1/2”, 1”, and 2”
ALL FILTERS ± 1/8” TOLERANCE. SPECIAL SIZES ARE NOT RETURNABLE.
FILTERS OVER 650 SQUARE INCHES—OVERSIZED FILTERS
We do not encourage filters over 650 square inches. The span is difficult to handle in normal use, requires a custom shipping carton, and is
easily damaged. We suggest using two or more filters rather than one large filter. All filters over 650 square inches will contain wire for support.
PERMATRON DOES NOT WARRANTY FILTERS OVER 1,000 SQUARE INCHES. Rigid filters over 650 square inches are subject to a
$6.00 per order special packaging charge. Rigid filters over 1,000 square inches are subject to a $12.00 per order special packaging charge.
FILTER RETURNS
A RETURN AUTHORIZATION NUMBER from Permatron Customer Service Department is required.
Freight prepaid
Filters are returned unused, in resalable condition, within 90 days of purchase.
Standard sizes are subject to a 25% restocking fee.
MODEL U’s (1/8”) are all custom and NOT RETURNABLE.
SPECIAL SIZE filters are NOT RETURNABLE.
STANDARD SIZES
10X20 14X20 16X24 18X30
12X12 14X24 16X25 20X20
12X20 14X25 18X18 20X24
12X24 14X30 18X20 20X25
12X30 15X20 18X24 20X30
12X36 16X20 18X25 24X24
25X25
SHIPPING DAMAGE CLAIM PROCEDURE
ALL SHIPPING CLAIMS ARE HANDLED THROUGH THE ORIGINAL SHIPPER—PERMATRON
Notify Permatron of damage within 24 hours. We immediately replace damaged goods to avoid
delays while claim is processed.
Keep the merchandise in the original shipping carton, as inspection by the carrier is necessary.
Call 1-800-882-8012 for instructions on handling filters damaged in transit.
This procedure refers also to product drop shipped to your customer. Make sure your customers
know to contact you any time there is damage—this will enable you to keep track of what action is
taken.
TERMS
Payment terms, Net 30. All prices are in US Dollars
Applicable freight charges will be added
Accounts unpaid after 30 days, are subject to an additional 1.5% per month late fee (annual
rate of 18%)
Accounts unpaid after 60 days, will be credit frozen until payment is received, new
orders will not be processed
All prices subject to change without notice
MasterCard, Visa, and American Express accepted
1-800-882-8012
Permatron Corporation
2020 Touhy Avenue
Elk Grove Village, IL 60007
Standard sizes are in stock and have a
24-48 hour turnaround
PERMATRON CORPORATION TABLE OF CONTENTS
RESIDENTIAL PAGE
Washable Electrostatic Air Filters
DustEater® and DustEater® Easy Flow…………………………………………………………………………………………..3
LifeStyle® Plus Models LR & MF…………………………………………………………………………………………………..4
DustPlus® Odors…………………………………………………………………………………………………………………….5
Adjustable Electrostatic……………………………………………………………………………………………………………..5
Foam………………………………………………………………………………………………………………………………….6
PermaFlo® Rigid Pad……………………………………………………………………………………………………………….6
Electonic Air Cleaner & Induct Filters
Electronic Air Cleaner Prefilter & After Filter Upgrade Kits……………………………………………………………………..7
Conversion Kit for Filter Housing Cabinets……………………………………………………………………………………….7
Cut-To-Fit Air Filters
Appliance Cut-to-Fit..………………………………………………………………………………………………………………..8
RESIDENTIAL/COMMERCIAL
PREVENT® Equipment Protection
Cut-to-fit Vent, Appliance, Electronic & Computer Filters……………………………………………………………………….9
Wrap Around Air Conditioner Filter………………………………………………………………………………………………..10
3-Dimensional Bonnet Style Fan Guard, Vent Cap, Fan Shroud, Ceiling Diffuser, Sock Filter…...………………………..11-12
Steel Framed Equipment Protection Filter MODEL R…………………………………………………………………………...13
Customized PreVent® Model R Worksheet………………………………………………………………………………………14
Flexible Edged Equipment Protection Filter MODEL U & BHA…………………………………………………………………15-16
Customized PreVent® MODEL U >2000 SQ IN Worksheet……………………………………………………………………17
HailStop® Hail Guard……………………………………………………………………………………………………………….18
MARINE/CORROSIVE ENVIRONMENT FILTERS
Duraloft®……………………………………………………………………………………………………………………………...19
Durafoam™…………………………………………………………………………………………………………………………..19
Duraflo™……………………………………………………………………………………………………………………………...19
COMMERCIAL/INDUSTRIAL
Washable Electrostatic Air Filters
Model IN………………………………………………………………………………………………………………………………20
Model HFA……………………………………………………………………………………………………………………………20
Model SME…………………………………………………………………………………………………………………………...21
Metal Filters
Metal Mesh Filter…………………………………………………………………………………………………………………….22
Mist Eliminator……………………………………………………………………………………………………………………….22
Aluminum Rangehood Filter………………………………………………………………………………………………………..23
Activated Carbon/Aluminum Rangehood Filter…………………………………………………………………………………..23
Grease Baffle Filter………………………………………………………………………………………………………………….24
Disposable Filters
Pleat 25-30% Efficiency (MERV 8)………………………………………………………………………………………………...25
Pleat Plus 40-45% Efficiency (MERV 11)…………………………………………………………………………………………25
Odor/Fume/Gas Adsorbing Air Filters
DustPlust® 2” & Replacement Carbon Pad..……………………………………………………………………………………..26
Panel and Pleat………………………………………………………………………………………………………………………27
High Density Carbon Packs or Alumina with Potassium Permanganate……………………………………………………...28
Disposable Honeycomb—Granular Carbon or Potassium Permanganate Filled…………………………………………….29
Bulk Carbon or Zeolite with Potassium Permanganate Filled V Bank Tray..………………………………………………….30
BULK MEDIA, PADS & SERVICE ROLLS…………………………………………………………………………………………………31-37
STABILIZING & HOLDING FRAMES, FRAMES & CHANNELS………………………………………………………………………...38
AIR FILTER ACCESSORIES
Bail Handles, Ringhanger Pull Tab, Vinyl Pull Tab….…………………………………………………………………………...39
Galvanized Steel Protection Screen……………………………………………………………………………………………….39
RESIDENTIAL ELECTROSTATIC AIR FILTERS
Ultimate Allergy Relief
Avg. Arrestance Efficiency 91%
Dust Holding Capacity 160 gm.
Initial Air Flow Resistance 0.16” w.g.
Low Airflow Resistance
Avg. Arrestance Efficiency 82%
Dust Holding Capacity 105 gm.
Initial Air Flow Resistance 0.11” w.g.
Combination polypropylene and non-woven
polyester media, wire reinforced, triple frame
construction
Stainless steel frames with drain holes
Exclusive ACCUMULATOR CHAMBER®
design for maximum performance and easy
cleanability
DE-1/4” can be used as a prefilter
UL Classified as to Flammability Only
Lifetime Warranty
Multiple layers of polypropylene media, wire
reinforced, triple frame construction
Stainless steel frame with drain holes
Exclusive ACCUMULATOR CHAMBER®
design for maximum performance and easy
cleanability
UL Classified as to Flammability Only
Lifetime Warranty
Recommended for heat pumps, sensitive
90+ furnaces and older systems with limited
airflow
-3-
Filters >650 square inches are subject to a $6.00 per order handling charge
Filters >1000 square inches are subject to a $12.00 per order handling charge (NOT UNDER WARRANTY, NEED PRIOR APPROVAL)
STANDARD SIZES
MODEL LIST $
DE-1” 87.92
DE-2” 98.74
DE-1/4” * 48.43
SPECIAL SIZES
MODEL SIZE LIST $
DE-1”, 1/2” 0-650 sq in
650-1000 sq in
100.63
112.04
DE-2” 0-650 sq in
650-1000 sq in
111.46
122.86
DE-1/4” * 0-650 sq in
650-1000 sq in
56.97
68.36
STANDARD SIZES
MODEL LIST $
EF-1” 64.55
EF-2” 75.37
SPECIAL SIZES
MODEL SIZE LIST $
EF-1”, 1/2” 0-650 sq in
650-1000 sq in
77.26
89.36
EF-2” 0-650 sq in
650-1000 sq in
88.10
99.49
Easy Flow
*Also available with flexible vinyl edge
RESIDENTIAL ELECTROSTATIC AIR FILTERS
Maximum Allergy Relief
Avg. Arrestance Efficiency 90%
Dust Holding Capacity 123 gm.
Initial Air Flow Resistance 0.19” w.g.
Combination of woven polypropylene
and non-woven polyester
Wire reinforced
Stainless steel frame
Designed for maximum particulate
removal
UL Classified as to Flammability Only
Lifetime Warranty
-4-
Filters >650 square inches are subject to a $6.00 per order handling charge
Filters >1000 square inches are subject to a $12.00 per order handling charge (NOT UNDER WARRANTY, NEED PRIOR APPROVAL)
SPECIAL SIZES
MODEL SIZE LIST $
LR-1” & MF-1” 0-649 sq in 57.60
650-1000 sq in 69.37
Low Resistance to Air Flow
Avg. Arrestance Efficiency 74%
Dust Holding Capacity 110 gm.
Initial Air Flow Resistance 0.07” w.g.
Combination woven polypropylene and
unique corrugated steel
Wire reinforced
Stainless steel frame
Ideal for heat pumps, sensitive 90+ fur-
naces and systems with limited air flow
UL Classified as to Flammability Only
Lifetime Warranty
STANDARD SIZES
MODEL LIST $
LR-1” & MF-1” 44.31
MODEL LR MODEL MF
RESIDENTIAL ELECTROSTATIC AIR FILTERS
Allergy Relief Plus Odor Control
Avg. Arrestance Efficiency 78%
Dust Holding Capacity 115 gm.
Initial Air Flow Resistance 0.19” w.g.
ADJUSTABLE AIR FILTER
One Filter Fits Multiple Sizes
Peak Arrestance Efficiency 83%
Initial Air Flow Resistance 0.12” w.g.
Washable electrostatic prefilter for particulate remov-
al; replaceable back panel of non-woven polyester
impregnated with Activated Carbon for odor/fume
removal
Galvanized steel frame; wire reinforced
Exclusive ACCUMULATOR CHAMBER®
design for maximum performance
Replacement odor panels sold in 4-packs
UL Classified as to Flammability Only
Lifetime Warranty (prefilter)
Model CH150: Activated Carbon for organic odors
(afterfilter)
Fits all sizes 14” X 20” to 20” X 25” X 1”
Multiple layers of electrostatic media
supported within a sturdy plastic frame
and outer support grids
Easy installation with scissors and tape
measure; no screws needed
Sold in cases of 10
UL Classified as to Flammability Only
Lifetime Warranty
-5-
Filters >650 square inches are subject to a $6.00 per order handling charge
Filters >1000 square inches are subject to a $12.00 per order handling charge (NOT UNDER WARRANTY, NEED PRIOR APPROVAL)
STANDARD SIZES
MODEL LIST $
DPCH-1” with CH150 80.89
DPCH-2” with CH150 84.94
MODEL LIST $
ADJ2025-1” 482.79/cs (48.28 ea)
SPECIAL SIZES
MODEL LIST $ SIZE
DPCH-1” 94.38
113.37
0-650 sq in
650-1000 sq in
DPCH-2” 99.10
119.03
0-650 sq in
650-1000 sq in
REPLACEMENT ODOR PANEL
MODEL SIZE LIST $
CH150 4-Pack 0-650 sq in
650-1000 sq in 84.36*
-Back panel can be replaced with 1/4” DustEater® if odor/
fume adsorption is no longer necessary.
* Refer to Model CHAR-WR Page 27
RESIDENTIAL AIR FILTERS
FOAM FILTER
Permanent/Washable
Polyester Rigid Pad
20 PPI Urethane foam media supported by
expanded metal mesh on both sides
Model FFA—1/4”, 1/2” or 1” thick aluminum
frame and expanded aluminum mesh support
Model FFG—1/4”, 1/2” or 1” thick galvanized
frame and expanded metal mesh support
UL Classified as to Flammability Only
A unique alternative to hogs hair
Available in pads or rolls
1/2” or 1” thick rigid construction, needs no
frame
Cleans easily with water—fibers unaffected
by moisture
Safe to handle, no fiberglass or sharp edges
Bi-directional air flow
UL Classified as to Flammability Only,
FMVSS302
MODEL PADS PER CASE LIST $
PFLO1524-1/2
15” X 24” X 1/2”
Bulk Packed
18 163.08/cs
(9.06 ea)
PFLO2025-1
20” X 25” X 1”
Bulk Packed
18 182.34/cs
(10.13 ea)
PFLO2025-8PK
20” X 25” X 1”
Display Packed
8 108.00/cs
(13.50 ea)
Avg. Arrestance Efficiency 1/2” - 69%
1” - 84%
Dust Holding Capacity 1/2” - 359 gm.
1” - 229 gm.
Initial Air Flow Resistance 1/2” - 0.03” w.g.
1” - 0.09” w.g.
FFA-1” Initial Air Flow Resistance 0.13” w.g.
SIZE
SQ IN
MODEL FFA
1/4” LIST $
MODEL FFA
1/2” LIST $
MODEL FFA
1” LIST $
0-100 32.11 39.50 52.49
101-200 32.11 39.50 52.49
201-300 43.57 50.91 57.33
301-400 52.54 60.53 71.51
401-500 54.64 65.20 81.84
501-600 63.41 73.97 90.93
601-700 77.95 93.81 114.80
701-800 92.31 112.29 145.08
Both dimensions over 24” add 30%; over 30” add 10%, over 50” add 20%
Over 800 square inches call for pricing
-6-
SIZE
SQ IN
MODEL FFG
1/4” LIST $
MODEL FFG
1/2” LIST $
MODEL FFG
1” LIST $
0-100 27.81 30.24 33.04
101-200 31.97 34.77 38.00
201-300 37.64 40.17 45.78
301-400 45.33 48.56 54.47
401-500 56.25 59.31 62.28
501-600 63.50 77.61 85.82
601-700 69.46 87.72 99.92
701-800 72.06 96.63 113.31
ELECTRONIC AIR CLEANER UPGRADES
CONVERSION KIT
FILTER HOUSING CABINET
1” Filter for Ducted Cabinets
EAC PREFILTER & AFTERFILTER
Upgrade Kit
For Electronic Air Cleaners
Kit includes conversion materials, air filter
and installation instructions
Specify filter size & air cleaner brand
(General, Space-Gard®, Air Bear™, etc.) &
model number
UL Classified as to Flammability Only (filter)
Lifetime Warranty (filter)
Permanent, washable and electrostatically
charged polypropylene prefilter removes
larger particles to increase working efficiency
of air cleaner; reduces arcing; reduces
maintenance requirements
Initial resistance to airflow 0.09” w.g.
Disposable activated carbon afterfilter re-
moves odors, ozone and ash brush-off that
otherwise goes back into the system
Independent testing shows 43% increase in
average arrestance efficiency over metal
mesh prefilter
Standard aluminum mesh prefilter available
-7-
CONVERSION KIT WITH FILTER CHOICE
MODEL LIST $
CKIT-DE 94.22
CKIT-DPCH 87.20
CKIT-EF 70.86
CKIT-LR 49.22
CKIT-MF 49.22 MODEL LIST $
EAC-KIT
Polypropylene
Prefilter & Afterfilter Kit
53.56
EAC-R
Polypropylene Prefilter 35.65
EAC-AC4
Carbon Afterfilter 4-Pack 88.60
EAC-MM-SPEC
Aluminum Mesh Prefilter 42.00
Install a Conversion Kit into customer’s existing
ducted filter housing cabinet to accommodate a 1”
electrostatic air filter by Permatron. The Permatron
Conversion Kit makes it easy to convert induct
pleat or electronic cell space to hold 1” filters by
creating a slide in channel.
Measure existing filter for exact dimensions.
CUT-TO-FIT APPLIANCE AIR FILTERS
Reduces airborne dust particles in Wall or Window Air Conditioning Units,
PTAC Units, Rangehoods, Electronic Air Cleaners and Furnaces
Simply cut to fit with scissors and install
Disposable Cut-To-Fit Air Filter
Contains 2 (15” X 24” X 1/4”) sheets of non-woven polyester filter media in peg board bag or bulk packaged
PermaCool® Permanent Electrostatic Cut-To-Fit Air Filter
Contains 1 (15” X 24” X 1/4”) sheet of washable corrugated polypropylene filter media in peg board bag
Available in master rolls, see bulk media page
Odor Removing Cut-To-Fit Air Filter
Contains 2 (15” X 24” X 1/8”) sheets of activated carbon impregnated non-woven polyester filter media in a peg
board bag or bulk packaged
Foam Cut-To-Fit Air Filter
Contains 1 (15” X 24” X 1/4”) sheet of 20 PPI foam filter media in a peg board bag or bulk packaged
Aluminum Mesh Cut-To-Fit Air Filter
Contains 1 (15” X 19” X 1/4”) sheet of bonded aluminum mesh or bulk packed
MODEL LIST $
CTF-NWPE10 Display Packaged—10 pack 50.40/cs (5.04/ea)
CTF-NWPE30 Commercial Bulk—30 pieces 43.20/cs (1.44/ea)
MODEL LIST $
PCOOL1524-20 Display Packaged—20 pack 258.00/cs (12.90/ea)
PCOOLROLL20 20” X 10’ Roll 97.25/ea
PCOOLROLL30 30” X 10’ Roll 129.87/ea
PCOOLROLL36 36” X 10’ Roll 145.72/ea
MODEL LIST $
CTF-ACF10 Display Packaged—10 pack 115.45/cs (11.54/ea)
CTF-ACF30 Commercial Bulk—30 pieces 247.61/cs (8.25/ea)
-8-
MODEL LIST $
CTF-FOAM10 Display Packaged—10 pack 77.47/cs (7.75/ea)
CTF-FOAM30 Commercial Bulk—30 pieces 95.71/cs (3.19/ea)
MODEL LIST $
CTF-RANGEHOOD10 Display Packaged—10 pack 186.69/cs (18.67/ea)
CTF-RANGEHOOD30 Commercial Bulk—30 pieces 430.06/cs (14.34/ea)
CUT-TO-FIT PREVENT® AIR FILTERS
-9-
Keep dirt out of ductwork
Simply cut-to-fit with
scissors and install filter
under deflector
Disposable Register Vent Filter Kit
Contains 3 (12” X 16”) sheets of non-woven polyester filter media
Enough for up to 12 standard register vents
MODEL LIST $
VF-NWPE10 Display Packaged—10 kits 66.20/cs (6.62/ea)
VF-NWPE30 Display Packaged—30 kits 178.50/cs (5.95/ea)
Permanent Electrostatic Register Vent Filter Kit
Contains 3 (12” X 16”) sheets of washable polypropylene filter media
Enough for up to 12 standard register vents
MODEL LIST $
VF-BHB10 Display Packaged—10 kits 102.90/cs (10.29/ea)
VF-BHB30 Display Packaged—30 kits 277.20/cs (9.24/ea)
Odor Removing Register Vent Filter Kit
Contains 3 (12” X 16”) sheets of activated carbon impregnated non-woven polyester filter media
Enough for up to 12 standard register vents
MODEL LIST $
VF-ACF10 Display Packaged—10 kits 111.90/cs (11.19/ea)
VF-ACF30 Display Packaged—30 kits 302.15/cs (10.07/ea)
Keeps dust from invading sensitive home or office electronics, audio visual equipment, refrigerators, laboratory equipment or
computer controlled equipment
Simply cut-to-fit with scissors and install filter over vent or air intake fan cover
Appliance & Electronics Protection Filter Kit
Kit contains: 4 (12” X 12”) sheets of disposable non-woven polyester filter media 4 (12”) strips of hook & loop mounting tape
MODEL LIST $
CTF-ELEC10 Display Packaged—10 kits 128.40/cs (12.84/ea)
CTF-ELEC30 30 Pc Bulk & 120 Pc Hook & Loop 346.50/cs (11.55/ea)
For use with CPU’s and other electronics to protect against invasion of dirt and dust which may impede unit performance
Simply attach hook & loop strips and install filter over air intake
High loft/low density media maximizes air permeability and prevents airflow restriction
Computer Protection Filter Kit
Kit contains: 6 (4-1/4” X 4-1/2”) sheets of disposable non-woven polyester filter media 4 (4”) strips of adhesive backed hook &
loop mounting tape
MODEL LIST $
PREVENT10 Display Packaged—10 Kits 79.10/cs (7.91/ea)
PREVENT50 50 Pc Bulk Kit
200 Pc Hook & Loop 165.00/cs (3.30/ea)
PREVENT100 100 Pc Media Replacement 77.00/cs (0.77.ea)
PREVENT® EQUIPMENT PROTECTION
Patented permanent, washable filter designed to protect any central air conditioning unit
No system modifications needed, filter simply wraps around the outside of the air intake grill and is held
in place across the rear of the unit by 3-20” bungee cords (included)
Comes in BHA—black high abrasion media that can be easily cut-to-fit with scissors
Low .02 in. w.g. resistance to air flow
Available in a case of 12
UL Classified as to Flammability only
UV Protected
5 Year Warranty
BHA Cut-to-Fit Style
Patents No. US 7,547,341; 7,332,011; 5,809,800; 6,793,715
-10-
Model Size QTY LIST $
PREVENTWA3-12C 38” X 110” 12 539.41/cs
WRAP-AROUND AIR CONDITIONER FILTER
PREVENT® 3 DIMENSIONAL EQUIPMENT PROTECTION
BONNET STYLE FAN GUARDS
PreVent bonnet filters are made to fit any fan guard, the bonnets are manufactured to the EXACT
size ordered, so measure carefully. Filters are not returnable. For price, round up to next whole # and
convert to square inches.
Model# BONNET—Black or White washable 3-dimensional polypropylene bonnet with
elastic edges. When measuring for the fit of a Bonnet or Fan guard filter, measure UP
AND OVER THE FRONT HALF OF GRILL.
MERV 8 & MERV 11 DISPOSABLE BONNETS AVAILABLE
UPON REQUEST—CALL FOR PRICING
Model# FANGUARD—Black or White washable 3-D polypropyl-
ene rear mount bonnet with elastic edges with center moto cut-out
and hook-loop closure. Measure for BONNET, as shown above. In
addition, measure the motor diameter (on the back of the fan) for
the center cut-out and hook/loop closure. For price, round up to
next whole # and convert to square inches. Cut-Out & Hook/Loop
included in price. Motor diameter required on order.
Motor Diameter
*Must be
purchased
in Case of 12
-11-
Model# FANSHROUD—White disposable non-woven polyester rear mount bonnet with elastic edge and
hook closure—12 pc per carton.
SIZE SQ IN MODEL BONNET
LIST $ 601-700 34.22
0-100 26.05 701-800 35.93
101-200 27.36 801-900 37.73
201-300 27.95 901-1000 39.61
301-400 29.54 1001-1200 41.59
401-500 31.43 1201-1300 43.68
501-600 32.59 1401-1500 65.17
SIZE
SQ IN
MODEL FANGUARD
LIST $
300 63.85
600 72.54
900 82.33
1200 92.20
1500 103.26
1800 115.66
2100 129.54
BLADE
DIAMETER
MODEL
FANSHROUD*
LIST $
MODEL
FANSHROUDHD*
LIST $
CAGE
MEASUREMENT
18 199.30/cs 209.04/cs Up to 26”
24 228.86/cs 257.18/cs 27” to 31”
26 230.98/cs 257.18/cs 32” to 34”
30 247.63/cs 265.63/cs 34” to 37”
32 247.63/cs 265.63/cs 37” to 39”
36 256.42/cs 285.79/cs 39” to 43”
42 264.48/cs 308.40/cs 44” to 50”
Model# FANSHROUD HD— Blue/White disposable tack type heavy duty non-woven polyester rear
mount bonnet with elastic edge and hook closure—12 pc per carton.
Cage Measurement
PREVENT® 3 DIMENSIONAL EQUIPMENT PROTECTION
VENT CAPS / CEILING DIFFUSERS / SOCK FILTERS
Model# VENTCAP E—Black or White washable 3-dimensional polypropylene cap
with elastic edges. Measure VENTCAP top length and top width. For VENTCAP
side height, specify desired filter height (standard height 4”). For price, round up to
next whole # and convert to square inches. Up to 4” side height included in price.
Model# DIFFUSER—Black or White washable 3-dimensional polypropylene
diffuser with a flexible vinyl edge and magnetic stripping. For metal grid system
ceiling air diffusers. CALL FOR PRICING.
Model# BONNETSOCK—Black or White washable 3-dimensional polypropylene with elastic edges. For
drop down ceiling vents or rooftop exhausts. CALL FOR PRICING.
SIZE SQ IN MODEL VENTCAP E
LIST $
0-300 63.85
301-600 72.54
601-900 82.33
901-1200 92.20
1201-1500 103.26
1501-1800 115.66
1801-2100 129.54
PreVent vent caps are made to fit any ventilation exhaust opening or air intake opening, the vent caps
are manufactured to the EXACT size ordered, so measure carefully. Filters are not returnable. For
price, round up to next whole # and convert to square inches.
-12-
PREVENT® EQUIPMENT PROTECTION
RIGID FRAME AIR INTAKE FILTERS
Electronic Equipment, Air Curtains, Air Intakes, Condenser Coils & Fins, Compressors, Package Terminal
Units, Air Conditioning Units, Chillers, Refrigerated Displays, Reach In Coolers, Ice Machines, Freezers
Model R 1/8” - 3/8” Thick with Steel Frame Design
R-1 has a single layer of washable three dimensional electrostatic black honeycomb polypropylene BHC;
R-2 contains two layers of BHC; Fits any equipment, specify size
1/8” - 5/16” thick galvanized steel frame is standard (stainless steel or aluminum frame add 23%, painted
black metal frame add 20%; painted metal not covered by warranty)
Can be converted to 1/2” or 1” frame by adding a “C” frame
Filter can be affixed to unit with magnetic stripping; add pull-tab for easy removal
Wire reinforcement included in filters 650 sq. in. and up; wire support can be added to smaller filters
UL Classified as to Flammability Only
UV Protected (black media)
Standard Model R—5 Year Warranty—Magnetic Filter Attachment—2 Year Warranty
R1 R2
Avg. Arrestance Efficiency 42% 72%
Dust Holding Capacity 67 gm. 100 gm.
Initial Air Flow Resistance 0.02” w.g. 0.05” w.g.
SIZE
SQ IN
MODELR1
LIST $
MODEL R2
LIST $
0-100 24.14 26.59
101-200 27.00 29.37
201-300 29.19 31.96
301-400 31.89 35.10
401-500 34.62 38.46
501-600 38.08 42.32
601-700 52.08 57.87
701-800 55.50 61.67
801-900 66.94 74.38
901-1000 68.93 76.59
Customize your PreVent®
Filter with installation
components
(see page 14)
NO WARRANTY ON FILTERS OVER 1,000 SQ. IN. CUT FILTER IN HALF TO CREATE 2 PIECES AND
USE SIDE BY SIDE MOUNT BRACKET Z
PreVent® Filter By Size
-13-
Filters over 650 square inches are subject to a $6.00 per order handling charge
Filters >1000 square inches are subject to a $12.00 per order handling charge (NOT UNDER WARRANTY, NEED PRIOR APPROVAL)
PREVENT® EQUIPMENT PROTECTION
CALCULATING YOUR CUSTOMIZED PREVENT STEEL
FRAMED FILTER UP TO 1,000 SQUARE INCHES-MODEL R
PRICE YOUR PREVENT FILTER—4 EASY STEPS ITEM
COST LIST
PRICED
PER
QTY.
NEEDED
TOTAL
COST LIST
Calculate the surface area of your filter, i.e., 12” X 12” = 144 SQ IN
Calculate linear inch for total perimeter, i.e., 12” + 12” + 12” + 12” = 48 LIN
Round dimensions up to the nearest inch
STEP 1—CHOOSE MEDIA (1/4” Galvanized Steel Frame Included)
R1-SINGLE LAYER BHC BLACK POLYPROPYLENE MEDIA Page 13 SQ IN
R2-DOUBLE LAYER BHC BLACK POLYPROPYLENE MEDIA Page 13 SQ IN
WHITE POLYPROPYLENE MEDIA (not UV protected) Available Upon Request—No Additional Cost
STEP 2– CHOOSE FINISHED EDGE 1/4” Galvanized Steel Frame Standard—NO Additional Cost
1/8”-5/16” STAINLESS STEEL FRAME +23% EA
1/8”-5/16” ALUMINUM FRAME +23% EA
1/8”-5/16” BLACK METAL FRAME +20% EA
C FRAME (< 650SQ IN) (#FRAMEC<650) $9.21 EA
C FRAME (> 650 SQ IN) (#FRAMEC>650) $9.21 EA
WIRE REINFORCED (#EXPMETAL-CUSTOM) FILTERS <650 SQ IN $0.02 SQ IN
WIRE REINFORCEMENT INCLUDED IN FILTERS >650 SQ IN No Additional Cost
PULL TAB VINYL (#PULLTAB-VINYL) 3/8” W x 1-1/2” L (Attached into Frame) $1.71 EA
PULL TAB CLOTH (#PULLTAB-CLOTH) 1” W x 1-1/2” L (Attached into Frame) $5.06 EA
STEP 3– CHOOSE MOUNTING OPTION
SNAP MOUNT (2PC) MOUNT KIT-R (#MOUNTINGKIT-R) $20.71 EA
SIDE BY SIDE MOUNT BRACKET-Z (#MOUNTBRACKETZ48) $34.88 EA
MAGNETIC STRIPPING $0.28 LIN
1/2” W x 1/8” thick stripping installed on steel frame with adhesive & rivets
#MAGSTRIP1/2 & #MAGSTRIP3/4
STEP 4—ADDITIONAL CUSTOM HANDLING CHARGES
OVER SIZED HANDLING (Any filter >650 SQ IN) $12.00 PER ORDER $
OVER SIZED HANDLING (Any filter >1,000 SQ IN)* $24.00 PER ORDER $
*FILTERS OVER 1,000 SQ IN ARE NOT UNDER WARRANTY,
NEED PRIOR APPROVAL
TOTAL LIST PRICE $
LESS DISTRIBUTOR DISCOUNT (If Applicable) -00%
FILTER COST $
-14-
PREVENT® EQUIPMENT PROTECTION
FLEXIBLE FRAMED AIR INTAKE FILTERS
Package Terminal Units—Air Conditioning Units—Chillers—Refrigerated Displays—Electronic Equipment
Ground Louvers—Air Intakes—Condenser Coils & Fins
Model U Wrap-Around Style with Flexible Edge Design
U-1 is single layer of washable three dimensional electrostatic black honeycomb polypropylene (BHC); U-2 has
two layers of BHC
BHA is a single layer of multi polymer coated polyester mesh used for high abrasion and oversized applications
Filter can be affixed to unit with hook/loop stripping, grommets or elastic bungee hooks
Fits any equipment, specify size
Special pattern cutting charge will apply to any filter not rectangular
Sewn 2.5” vinyl edge is standard for flexible filters 0-2000 square inches; sonic welded edges are available for
an additional cost
Single stitch standard; double stitch available—no extra charge
UL Classified as to Flammability Only
UV Protected (black media)
5 Year Warranty; extended warranty available
U1 U2 BHA
Avg. Arrestance Efficiency 42% 72% N/A
Dust Holding Capacity 67 gm 100 gm N/A
Initial Air Flow Resistance 0.02” w.g. 0.05” w.g. 0.02” w.g.
-15-
SIZE SQ.
IN.
MODEL
U-1
LIST $
MODEL
U-2
LIST $
MODEL
BHA
LIST $
0-100 39.78 47.08 51.36
101-200 42.11 49.42 53.92
201-300 44.44 51.77 56.46
301-400 46.80 54.10 59.02
401-500 49.13 56.43 61.57
501-600 51.46 58.78 64.12
601-700 53.81 68.43 74.77
701-800 56.15 70.76 77.20
801-900 58.48 73.11 79.75
901-1000 60.83 75.45 82.30
SIZE SQ.
IN.
MODEL
U-1
LIST $
MODEL
U-2
LIST $
MODEL
BHA
LIST $
1001-1100 63.17 92.41 100.80
1101-1200 65.50 94.74 103.36
1201-1300 67.85 97.09 105.91
1301-1400 70.18 99.42 108.47
1401-1500 72.52 101.76 111.02
1501-1600 74.87 104.11 113.57
1601-1700 77.20 106.44 116.12
1701-1800 79.54 108.78 118.66
1801-1900 81.89 111.13 121.22
1901-2000 84.22 113.46 123.79 Patent No. US 6,793,715;
7,547,341; 7,332,011;
5,809,800
PreVent® FILTER BY SIZE
Customize your
PreVent® Filter
with installation
components like
grommets or hook/
loop attachments.
See page 17 for
pricing.
Filters over 2000 square inches see
page 16 for pricing.
Round dimensions up to nearest inch.
Ask about Flexible
Magnetic Filters.
PREVENT® EQUIPMENT PROTECTION
CUSTOMIZED PREVENT WRAP-AROUND FILTER
OVER 2000 SQUARE INCHES
Package Terminal Units—Fan Guard Bonnets—Air Conditioning Units—Chillers—Refrigerated Displays—
Electronic Equipment—Ground Louvers—Air Intakes—Condenser Coils & Fins
-16-
To price filters over 2,000 square inches, start with the media costs below and add
optional/customized installation components.
1. Vinyl Binding by Linear inch
2. Sonic Welded Edge instead of
Vinyl Binding
3. Grommets
4. Hook & Loop (regular or high
performance)
5. Quick Mounting self tapping
slotted screws
6. Plastic Mount Kit
7. Anchored Mounting Jack-Nut
kits
8. Bungee Cords
9. Center Seam for Filters with
both dimensions >60”
10. Pattern Cutting for Filters not
Rectangular
SIZE SQ.
IN.
U1 SINGLE U2 DOUBLE BHA MESH
SINGLE
LIST $ POLYPROPYLENE LIST $
2001-2500 42.05 84.08 79.75
2501-3000 50.45 100.91 95.71
3001-3500 58.87 117.71 111.65
3501-4000 67.25 134.52 127.61
4001-4500 75.68 151.33 143.55
4501-5000 84.08 168.15 159.50
5001-6000 92.49 184.96 175.46
6001-7000 100.89 201.77 191.40
7001-8000 109.32 218.60 207.36
8001-9000 117.71 235.41 223.30
9001-10000 126.12 252.23 239.26
10001-15000 134.52 269.03 255.21
15001-20000 142.94 285.85 271.15
20001-25000 151.33 302.66 287.11
25001-30000 159.40 319.48 303.05
MEDIA COST ONLY
WARNING/ATTENTION
Hook/loop not
recommended for extreme
temperature applications.
For outdoor mounting
supplement with grommet/
screw mount.
Adhesive should be applied
at room temperature 68° or
higher. Wipe surface with
alcohol. Should be dry and
free of oils.
Standard Grommets use
10-12” placement. Custom
grommet placement require
1 Pattern Cutting handling
charge—$30.00 LIST
Use page 17 to calculate
customized finishing options.
Filters greater
than 60” wide both
dimensions will
require center
seam.
PREVENT® EQUIPMENT PROTECTION
CALCULATING YOUR CUSTOMIZED PREVENT WRAP-AROUND
FILTER OVER 2000 SQUARE INCHES—MODEL U
PRICE YOUR PREVENT FILTER—4 EASY STEPS ITEM
COST LIST
PRICED
PER
QTY.
NEEDED
TOTAL
COST
LIST
Calculate the surface area of your filter, i.e., 12” X 12” = 144 SQ IN
Calculate linear inch for total perimeter, i.e., 12” + 12” + 12” + 12” = 48 LIN
STEP 1—CHOOSE MEDIA
U1—SINGLE LAYER POLYPROPYLENE MEDIA Page 15 SQ IN
U2—DOUBLE LAYER POLYPROPYLENE MEDIA Page 15 SQ IN
BHA—SINGLE LAYER HIGH ABRASION MEDIA Page 15 SQ IN
STEP 2—CHOOSE FINISHED EDGE
2.5 VINYL BINDING (#VINYL-BLK2.5) FINISHED EDGE 1-1/4” (2.5” Folded Vinyl) $0.30 LIN
GROMMET 3/8” ID - 13/16” OD STAINLESS (#GROMMET3/8SS)
***GROMMETS SHOULD BE SPACED @ 10-12” LENGTHS $2.16 EA
SONIC WELD (Instead of Vinyl Binding) $0.20 LIN
STEP 3—CHOOSE MOUNTING OPTION
LOOP (#VELLOOP1-NOADH) (Sewn on Filter) $0.16 LIN
HOOK (#VELHOOK1-ADH) (With Adhesive) $0.16 LIN
MOUNT KITS12 (#MOUNTKIT-S12) $24.96 12-PK
MOUNT KITD12 (#MOUNTKIT-D12) $27.96 12-PK
QUICK MOUNT—SELFTAPPING SLOTTED SCREWS (#SCREW12X3/4) $3.55 10-PK
ANCHORED MOUNT—JACK-NUT MOUNTING KITS (#MOUNTINGKIT3/8) $26.58 12-PK
5” BUNGEES—3 PACK (#BUNGEEKIT-5) $5.20 EA
10” BUNGEES—3 PACK (#BUNGEEKIT-10) $5.89 EA
20” BUNGEES—3 PACK (#BUNGEEKIT-20) $9.96 EA
STEP 4—ADDITIONAL CUSTOM HANDLING CHARGES
OVER SIZED HANDLING (Any filter >5000 SQ IN or both dimensions >60”) $30.00 PER ORDER
OVER SIZED HANDLING (Any filter >15000 sq in) $40.00 PER ORDER
PATTERN CUTTING (Any filter not rectangular or with cutouts) $31.39 EA
VINYL CENTER SEAM (#VINYL-CTRSEAM) (If both dimensions >60”) $0.20 LIN
TOTAL LIST PRICE $
LESS DISTRIBUTOR DISCOUNT (If Applicable) -00%
FILTER COST $
-17-
HAILSTOP® HAIL GUARD
RIGID BLACK POLYPROPYLENE NETTING & PLASTIC MOUNTING KIT
Media is a rigid black plastic netting with 3/8” diamond shaped openings
Lightweight and easily cleaned, netting is used to deflect airborne objects and debris such as hail
Can be used alone as hail guard or layered behind PreVent® Model U Equipment Protection Filter (see
page 15) for added air intake protection
Available in 54” wide by 50 foot length master roll
Available in complete kits for installation on equipment up to 10-20 tons
Can be cut with scissors or utility knife
UV Protected
Rot, weather, abrasion and corrosion resistant
Can be installed with our plastic mounting kit:
MOUNT KIT—SINGLE: Hail Guard Alone
MOUNT KIT—DOUBLE: Hail Guard & PreVent® Model U Media Filter
-18-
MODEL SIZE DESCRIPTION QTY LIST $
HailStop10
Kit for equipment up to 10
ton
54” X 10’ 1 Roll Netting, 12 Single Mount Clips & Screws
per kit
4 Kits per
Case*
85.74
per kit
HailStop20
Kit for equipment up to 20
ton
54” X 20’ 1 Roll Netting, 12 Zip Ties, 24 Single Mount
Clips & Screws per kit
3 Kits per
Case*
150.96
per kit
HailStop50 54” X 50’ 1 Master Roll Netting 1 Roll 233.58
Media-BPN54HG 54” X LFT Netting Sold by Linear Foot TBD 4.02/LFT
Mount KitS12 Single Height 12 Mount Clips & Screws 1 Bag 24.96
Mount KitD12 Double Height 12 Mount Clips & Screws 1 Bag 27.96
Mount KitS100 Bulk Pack 100 Single Height Mount Clips & Screws 1 Bag 183.52
*Shipping rates are based on box dimensions. It is recommended that you consolidate your purchase to the case quantity above to
save on freight. HailStop10-case dimensions 11” X 11” X 55” HailStop20-case dimensions 14” X 11” X 55”
Note: When purchasing hail guard by the linear foot it is recommended that you have enough media to shift sideways one or
two openings to accommodate matching plastic mounts with the diamond openings. Volume Precut Pieces available by
OEM quote only.
MARINE & CORROSIVE ENVIRONMENT AIR FILTERS
Marine environments can be very unforgiving places to operate costly equipment and maintain
occupant safety and comfort. Extreme weather conditions and sea salt sprays often create a
corrosive environment. Common complaints in the luxury boating/shipping industry include a build
up of airborne dust particles, bacteria & molds.
-19-
MODEL DURALO™: Contains polypropylene media and plastic grid.
Woven media is manufactured from non porous filament, which will not absorb or
retain moisture, and does not encourage the growth of mold, bacteria, viruses,
yeast or fungi. Containing our exclusive ACCUMULATOR CHAMBER®
construction, this filter is designed to work in applications requiring very low
resistance to airflow or high velocity air flow.
MODEL DURAFOAM™: Contains a combination of polypropylene and
urethane foam. Used for applications needing greater arrestance efficiency.
Holds up well in wet environments including salt water, and can also be used for
pond and water filters
MODEL DURALOFT®: Contains rigid high loft PermaFlo® polyester media. Used for applications
needing greater moisture condensation surface area.
All three filter models are encased in a front and rear black plastic grid for added support
All plastic filters are made to withstand corrosive environments, including thorough cleaning practices that
include chlorine bleach
5 Year Warranty
SIZE
SQ IN
MODEL DF1/2”
DURAFOAM
LIST $
MODEL DF1”
DURAFOAM
LIST $
MODEL DL1”
DURALOFT
LIST $
MODEL DL 2”
DURALOFT
LIST $
MODEL DLO1”
DURALO
LIST $
MODEL DLO2”
DURALO
LIST $
0-100 45.44 60.37 38.13 59.52 50.04 62.88
101-200 47.41 62.98 42.60 74.36 57.40 68.74
201-300 58.56 65.93 48.75 83.82 62.14 73.62
301-400 69.61 82.24 56.89 95.98 67.05 78.51
401-500 74.98 94.13 65.39 106.68 79.22 90.70
501-600 85.06 104.57 82.10 118.42 84.11 95.59
601-700 107.89 132.01 96.40 146.04 92.54 105.16
MODEL # FILTER MEDIA FRAME ACCUMULATOR
CHAMBER DE-
INITIAL AIR
FLOW
MERV
RATING
DURAFOAM-1/2” Plastic Screen Netting, 20 PPI Foam Media Stainless Steel No 0.09” N/A
DURAFOAM-1” Plastic Screen Netting, 20 PPI Foam Media Black Plastic or Stainless Steel No 0.08” 6
DURALO-1” Plastic Screen Netting, Black Polypropylene Media Stainless Steel Yes 0.05” N/A
DURALO-2” Plastic Screen Netting, Black Polypropylene Media Stainless Steel Yes 0.06” N/A
DURALOFT-1” Plastic Screen Netting, Rigid Polyester Media Black Plastic or Stainless Steel No 0.05” 5
DURALOFT-2” Plastic Screen Netting, Rigid Polyester Media Stainless Steel No 0.12” 5
Specify black plastic or stainless steel frame option where available, same cost of both.
Model IN with a stainless steel frame can also be used in corrosive environments, see page 20
Filters >650 square inches are subject to a $6.00 per order handing charge
Filters >1,000 square inches are subject to a $12.00 per order handling charge (NOT UNDER WARRANTY, NEED PRIOR APPROVAL)
COMMERCIAL/INDUSTRIAL ELECTROSTATIC AIR FILTERS
MODEL IN
Low Resistance & Easy Cleanability
Avg. Arrestance Efficiency 78%
Dust Holding Capacity 130 gm.
Initial Air Flow Resistance 0.11” w.g.
MODEL HFA
High Efficiency Particle Removal
Avg. Arrestance Efficiency 89%
Dust Holding Capacity 120 gm.
Initial Air Flow Resistance 0.20” w.g.
Multiple layers of industrial polypropylene media with wire
reinforcement
Exclusive ACCUMULATOR CHAMBER® design for maximum
performance
Filter comes in galvanized steel frame; stainless steel or
aluminum frames available; add 23%
Model IN with a stainless steel frame recommended for
caustic or corrosive environments
Compatible with systems where high velocity air is pushed through limited filter surface areas
FDA approved materials
UL Classified as to Flammability Only
5 Year Warranty
SIZE
SQ IN
MODEL IN
1/2” & 1”
LIST $
MODEL IN
2”
LIST $
0-100 43.51 54.67
101-200 49.82 59.77
201-300 54.05 64.02
301-400 58.30 68.26
401-500 68.89 78.86
501-600 73.15 83.12
601-700 80.46 91.44
701-800 88.51 100.59
801-900 97.36 110.66
901-1000 107.10 121.73
Combination industrial polypropylene and non-woven
polyester media
Exclusive ACCUMULATOR CHAMBER® design for
maximum performance
Filter comes in galvanized steel frame; stainless steel or
aluminum frames available; add 23%
A combination of electrostatic and impingement filtration for optimal effectiveness
UL Classified as to Flammability Only
5 Year Warranty
SIZE
SQ IN
MODEL
HFA 1/4”
LIST $
MODEL
HFA 1/2 & 1”
LIST $
MODEL
HFA 2”
LIST $
0-100 34.32 58.81 69.97
101-200 38.44 66.79 76.75
201-300 40.29 71.04 81.01
301-400 42.24 75.08 85.24
401-500 46.56 83.78 93.76
501-600 48.52 88.02 97.98
601-700 53.39 96.83 107.78
701-800 58.71 106.51 118.56
801-900 64.58 117.16 130.40
901-1000 71.04 128.88 143.43
-20-
Filters >650 square inches are subject to a $6.00 per order handling charge
Filters >1000 square inches are subject to a $12.00 per order handling charge (NOT UNDER WARRANTY, NEED PRIOR APPROVAL)
COMMERCIAL/INDUSTRIAL ELECTROSTATIC AIR FILTERS
SYNTHETIC MIST ELIMINATOR—COALESCING FILTER
Reduce the amount of mist, aerosols and
fumes in atmosphere
2” stainless steel outer frame, reinforced
with steel interior panels
Multiple layers of honeycombed, corrugated
and tubular monofilament polypropylene
media creates significant surface area for
coalescing to occur
Greater affinity to other synthetic polymer
based by-products
Not for use in heat applications exceeding
250° Fahrenheit
Nonporous and nonreactive to chemicals
and corrosive environments
Drain holes positioned for easy cleaning
SIZE MODEL SME LIST $
12 X 24 X 2 155.34
24 X 24 X 2 209.66
CUSTOM SIZES AVAILABLE UPON REQUEST
CALL FOR PRICING
-21-
Filters >650 square inches are subject to a $6.00 per order handling charge
Filters >1,000 square inches are subject to a $12.00 per order handling charge (NOT UNDER WARRANTY, NEED PRIOR APPROVAL)
METAL MESH AIR FILTERS
ALUMINUM, GALVANIZED OR STAINLESS
CORRUGATED METAL MESH
Model MMA: MMA-1” Initial air flow resistance 0.03 in w.g., MMA-2” Initial air flow resistnace 0.04 in. w.g., Light
Weight Aluminum supported by expanded mesh, maximum temperature 240°F
Model MMH: Heavy Duty Aluminum, retains 585 grams of dust per 2.25 sq. ft., initial resistance 0.077 in w.g.,
maximum temperature 275° F
Model MMG: Galvanized Steel, retains 290 grams of dust per 2.25 sq. ft., initial resistance 0.05 in. w.g., maximum
temperature 425° F
Model MMS: Stainless Steel, recommended final resistance is 0.5” w.g., UL 900 Class 1
Use Stainless Steel Metal Mesh for caustic or corrosive environments or utilize Model IN in stainless steel frame;
see Model IN page 20
UL Classified as to Flammability Only
OIL MIST OR WATER DROPLET ELIMINATOR Model MME: Multiple layers of aluminum slit and expanded into mesh with wire support held in an
aluminum frame
Captures oil mist found in return air in industrial machine shops and water droplets from cooling coils
and evaporative media or unevaporated moisture downstream from humidifiers
Frame contains drain holes on all sides
MME-1” Initial air flow resistance
0.05 in w.g.
MME-2” Initial air flow resistance
0.06 in w.g.
UL Classified as to Flammability
Only
STANDARD SIZES
SIZE MODEL MMA
LIST $
12 X 24 X 1 39.28
16 X 20 X 1 39.28
16 X 25 X 1 45.65
20 X 20 X 1 45.65
20 X 25 X 1 48.07
24 X 24 X 1 49.00
10 X 20 X 2 45.84
12 X 24 X 2 47.11
16 X 20 X 2 47.11
16 X 25 X 2 50.30
20 X 20 X 2 50.30
20 X 25 X 2 53.64
24 X 24 X 2 59.45
SPECIAL SIZES
SIZE SQ IN MME LIST $ MMA LIST $ MMH LIST $ MMG LIST $ MMS LIST $
1”
0-100 35.59 30.26 49.82 35.13 125.49
101-200 40.53 38.00 59.85 35.32 152.11
201-300 49.45 45.36 72.63 38.78 180.25
301-400 55.36 53.72 83.66 47.26 223.69
401-500 64.01 61.90 90.57 59.49 233.88
501-600 89.04 70.15 102.69 61.78 260.32
601-700 92.99 78.34 148.80 79.64 403.90
2”
0-100 40.96 41.00 55.09 40.74 142.81
101-200 50.22 45.77 66.55 39.63 173.24
201-300 62.11 56.20 80.83 46.73 194.53
301-400 72.76 70.53 94.51 53.93 245.11
401-500 84.16 80.60 104.03 61.77 269.52
501-600 109.80 92.01 112.56 65.45 296.62
601-700 123.44 103.41 162.65 94.15 471.94
Model MMA & MME >700 square inches use multiplier: 1” = 0.15 LIST X SQ IN; 2” = 0.19 LIST X SQ IN
Dimensions over 30” add 10%; dimensions over 50” add 20%; dimensions over 70” add 30%
MMA filters available in 1/2” use MMA 1” prices
3 week lead time on MMH/MMS filters
-22-
Filters >650 square inches are subject to a $6.00 per order handling charge
Filters >1,000 square inches are subject to a $12.00 per order handling charge (NOT UNDER WARRANTY, NEED PRIOR APPROVAL)
APPLIANCE FILTERS
1/8” - 1/2” APPLIANCE FILTERS
Reduces airborne dust particles and grease
Contains multiple layers of bonded aluminum in
an aluminum frame
UL Classified as to Flammability Only
5 Year Warranty
Range Hoods—Microwave Ovens—Bath Fans
-23-
Bonded Aluminum Model RH
Initial Airflow Resistance 0.06 in w.g.
Odor/Fume Removal Model RHAC
Collects cooking odors, dust and grease in
ductless range hoods
Coconut shell carbon impregnated non-woven
polyester media with fire retardant supported by
light weight aluminum mesh in an aluminum
frame
UL Classified as to Flammability Only
Disposable
SIZE
SQ IN
MODEL RH
1/8”—1/4”
MODEL RH
1/2”
MODEL RHAC
1/8” -1/4”
MODEL
RHAC 1/2”
0-100 22.93 32.29 33.80 49.37
101-200 28.78 42.77 36.98 53.47
201-300 41.77 45.20 39.95 56.82
301-400 43.15 58.87 45.57 63.50
401-500 54.61 72.92
501-600 59.93 82.94
Specify thickness
when ordering
Dimension over 30”
add 10%
METAL FILTERS
BAFFLE GREASE FILTERS
-24-
MODEL GFG
Galvanized Steel MODEL GFA Aluminum
MODEL GFS
Stainless Steel
Two layers of roll formed
baffles are equally
spaced
Spacing creates an air
flow which causes
grease to collect, drain
down the baffle and into
collecting trough
Designed to prevent
flame from passing
through the filter
Maximum temperature
450° F
Classified by UL (grease)
NFPA std. 96
All aluminum baffle filter
with unique roll formed
baffles
Designed to prevent
flame from passing
through the filter into duct
work
Maximum temperature
250° F
Two layers of 304
stainless steel roll
formed baffles are
equally spaced
Spacing creates an air
flow which causes
grease to collect, drain
down the baffles and
into collecting trough
Designed to prevent
flames from passing
through the filter
Maximum temperature
900° F
Also available in 430
stainless steel
SIZE MODEL GFG
LIST $
MODEL GFA
LIST $
MODEL GFS
LIST $
16 X 20 X 2 48.60 74.10 224.70
16 X 25 X 2 54.00 81.60 246.30
20 X 16 X 2 48.00 73.50 222.00
20 X 20 X 2 52.80 79.80 242.00
20 X 25 X 2 67.50 100.20 307.50
25 X 20 X 2 66.90 99.00 303.90
25 X 16 X 2 52.80 90.90 242.70
24 X 24 X 2 77.40 111.90 348.60
10 X 20 X 2 43.50 68.70 202.80
16 X 16 X 2 48.48 74.10 224.70
25 X 25 X 2 77.40 114.90 348.60
Custom sizes available—call for pricing
3 week lead time
When ordering state vertical dimension
first
Handles sold on page 39
Actual size of filters are undercut (i.e. 16”
X 20” X 2” comes 15 1/2” X 19 1/2” X 1
7/8”)
1” thick baffle filter available upon request
DISPOSABLE PLEATED AIR FILTERS
STANDARD
CAPACITY
PLEAT 25-30%
EFFICIENCY
Merv 8 Extended Surface
HIGH
CAPACITY
PLEAT 40-45%
EFFICIENCY
Merv 11 Extended Surface
High-performance 100% synthetic media,
bonded to a metal grid on the air exiting side
Deep configuration pleats allow maximum
air flow and dust holding capacity
1”=13 pleats 2”=10 pleats, 4”=9 pleats per
lft.
Durable moisture-resistant die cut frame
Diagonal and horizontal stabilizer face grids
and metal grid support
Initial air flow resistance 1” - 0.15”;
2” - 0.12”; 4” - 0.10” w.g.
UL 900 Classified as to Flammability Only
A unique, high performance, 100%
synthetic media, bonded to a metal grid
on the air exiting side
1”=12 pleats; 2”=12 pleats, 4”=11
pleats per ft.
Frame is moisture resistant heavy duty
beverage board
Initial air flow resistance 1” - 0.17”;
2” - 0.15”; 4” - 0.10” w.g.
UL 900 Classified as to Flammability
Only
Greater than 200 dust holding capacity
@1.5” w.g.
Initial efficiency greater than 74% on
1-3 million particles
-25-
STANDARD SIZES
SIZE
MODEL
PL30-1”
LIST $
MODEL
PL30-2”
LIST $
CASE
QTY
MODEL
*PL30-4”
LIST $
CASE
QTY
MODEL
*PL30
PLUS-1”
LIST $
CASE
QTY
MODEL
*PL30
PLUS-2”
LIST $
CASE
QTY
MODEL
*PL30
PLUS-4”
LIST $
CASE
QTY
12 X 24 7.95 EA 8.40 EA 12 14.18 EA 12 9.63 EA 12 12.10 EA 12 18.67 EA 12
16 X 20 7.95 8.40 12 14.18 6 9.63 12 12.10 12 18.67 6
16 X 25 8.65 9.50 12 15.91 6 10.38 12 13.17 12 18.98 6
20 X 20 8.65 9.50 12 15.91 6 10.38 12 13.17 12 18.98 6
20 X 25 9.50 10.92 12 17.84 6 11.78 12 15.48 12 22.02 6
24 X 24 10.41 12.44 12 19.46 6 12.55 12 16.78 12 27.10 6
High Efficiency Pleats
Mini Pleats Rigid Filters
Bag Filters HEPA Filters
Ring Panels Link Filters
*Priced individually—must order by full case
ADDITIONAL FILTERS AVAILABLE UPON REQUEST— CALL FOR PRICING
PARTICULATE + ODOR/FUME ADSORPTION AIR FILTER
COMMERCIAL / INDUSTRIAL
Particulate Removal + Activated
Carbon for Fume Removal
Avg. Arrestance Efficiency 89%
Dust Holding Capacity 108 gm.
Initial Air Flow Resistance 0.23” w.g.
Permanent/washable electrostatic prefilter of woven
polypropylene with wire reinforcement; 0.06” initial
pressure drop without carbon back panel
Replaceable fill options include high density carbon
pack: (CWC-300) 300 grams of granular carbon per
square foot in flexible mesh; or (CWB-375) 375 grams
of granular carbon and alumina with potassium
permanganate for light gases
UL Classified as to Flammability Only
CHEMICAL COMPOUNT AFFINITY CHART
Acetic Acid CWC & CWB Hydrogen Sulfide CWB
Acetone CWC Mercaptan CWC & CWB
Acrolein CWB Methyl Alcohol CWC
Aldehydes CWC & CWB Methylene Chloride CWC
Amines CWB Methyl Ethyl Ketone CWC
Ammonia CWB Nitric Oxide CWB
Benzene CWC Nitrogen Dioxide CWB
Chlorine CWC Ozone CWC
Ethyl Alcohol CWC Sulfur Dioxide CWB
Formaldehyde CWB Sulfur Trioxide CWB
Gluteraldehyde CWB Toluene CWC
Hydrogen
Cyanide
CWB Volatile Organic
Compounds
CWC
2”
STANDARD & SPECIAL SIZES
MODEL
DP2CW300
CWCPO300
PAD INCLUDED
MODEL
DP20G375
CWBPO375
PAD INCLUDED
SIZE LIST $ LIST $
12X24X2” 113.91 138.77
16X20X2” 119.41 151.59
16X25X2” 127.49 153.38
18X24X2” 130.05 157.48
20X20X2” 127.49 153.38
20X24X2” 134.16 163.39
20X25X2” 136.47 165.94
24X24X2” 1472.98 175.94
Special Sizes
0-650 sq in
>650 sq in
219.05
Call for quote
247.21
Call for quote
REPLACEMENT PADS
MODEL
CWCPO300
ODORS/
FUMES
MODEL
CWBPO375
ODORS/LIGHT
GASES
SIZE LIST $ LIST $
12X24 63.61 85.89
16X20 69.25 98.97
16X25 77.53 100.83
18X24 80.14 104.99
20X20 77.53 100.83
20X24 84.31 109.15
20X25 86.66 113.62
24X24 93.34 123.84
Special Sizes
Call for quote Call for quote
-Stainless steel frame available; add 23%
-2 week lead time
-26-
ODOR/FUME ADSORBING AIR FILTERS
Model # Filter Media
Initial
Air Flow
Resistance
Avg.
Arrestance
Efficiency
Dust
Holding
Capacity
MERV
Rating
Carbon/
Sq. Ft.
Alumina/
Sq. Ft.
UL 900
Class Frame
CHARWR-4PK Activated Carbon 0.14” 81% 80 gms N/A 15.1 gms None 2 Steel
CHARPL-1” Activated Carbon 0.14” 75% + 58 gms 7 100 gms None 2 Bev Board
CHARPL-2” Activated Carbon 0.16” 75% + 141 gms 7 200 gms None 2 Bev Board
CHARPL-4” Activated Carbon 0.12” N/A N/A N/A 100 gms None 2 Bev Board
CHARPLBX-1” Carbon, Alumina,
Potassium Permanganate
0.31” N/A N/A N/A 125 gms 125 gms 2 Bev Board
CHARPLBX-2” Carbon, Alumina,
Potassium Permanganate
0.25” N/A N/A N/A 250 gms 250 gms 2 Bev Board
CHARPLBX-4” Carbon, Alumina,
Potassium Permanganate
0.25” N/A N/A N/A 375 gms 375 gms 2 Bev Board
STANDARD SIZES
SIZE
MODEL
CHARPL-1”
LIST $
MODEL
CHARPL-2”
LIST $
MODEL
CHARPL-4”
LIST $
MODEL
CHARPLBX-1”
LIST $
MODEL
CHARPLBX-2”
LIST $
MODEL
CHARPLBX-4”
List $
12X24 51.19 EA 51.76 EA 59.45 EA 55.00 EA 85.81 EA 117.38 EA
16X20 52.88 EA 53.53 EA 61.84 EA 58.25 EA 89.50 EA 126.35 EA
16X25 57.46 EA 58.81 EA 69.44 EA 67.43 EA 103.28 EA 148.31 EA
20X20 58.48 EA 59.36 EA 77.85 EA 67.54 EA 106.41 EA 150.11 EA
20X25 63.38 EA 63.53 EA 79.53 EA 77.50 EA 122.54 EA 176.53 EA
24X24 65.52 EA 68.43 EA 82.00 EA 81.99 EA 128.14 EA 197.03 EA
12 PER CASE 12 PER CASE 6 PER CASE 12 PER CASE 6 PER CASE 3 PER CASE
ALL SIZES
SIZE
SQ IN
MODEL CHAR-WR
LIST $
SIZE
SQ IN
MODEL CHAR-WR
LIST $
0-100 72.30/4-PK 18.08 EA 601-700 141.78/4-PK 35.45 EA
101-200 85.98/4-PK 21.49 EA 701-800 162.04/4-PK 40.51 EA
201-300 92.97/4-PK 23.24 EA 801-900 182..29/4-PK 45.57 EA
301-400 99.96/4-PK 24.99 EA 901-1000 202.54/4-PK 50.64 EA
401-500 106.94/4-PK 26.74 EA 1001-1100 222.80/4-PK 55.70 EA
501-600 130.35/4-PK 32.59 EA 1101-1200 243.05/4-PK 60.76 EA
Convert to 1/2” or 1” by adding a “C” frame; add $9.21. Allow 2 week lead time for pleated filters, order by full case count. Special sizes are available ;
call for quote.
DISPOSABLE CARBON PANELS & DISPOSABLE CARBON & ALUMINA EXTENDED SURFACE PLEATS
3.2 ounce non-woven polyester impregnated 150% with activated carbon
Quality, gas phase, 60% minimum activity activated carbon, carbon weight 4.8+/- 0.72 oz/sq yd
Air permeability 900 +/- 100 CFM @ 0.5” w.g.
Model CHARWR is a 1/8-1/4” thick disposable activated carbon panel filter highly effective for organic odors, framed in galvanized steel. Filters
over 600 sq in must have wire support, see below for pricing. Standard package includes 4 filters
Model CHARPL is a 1”-4” thick disposable activated carbon extended surface pleated filter, highly effective for organic odors, framed with a
moisture resistant beverage board die cut frame with stabilizer face grids and wire reinforcement
Model CHARBXPL is a disposable extended surface pleated filter, highly effective for removing organic odors, particulates and light gases,
framed with a moisture resistant beverage board die cut frame with stabilizer face grids and wire reinforcement. Adsorbents comprised of equal
values of 60% activity granular activated carbon and activated alumina with 5% potassium permanganate. Light gas removal includes Ammonia,
Formaldehyde, Hydrogen Sulfide and Sulfur Dioxide
1” pleated type has approximately 3X the effective media surface of a 1/4” panel filter
-27-
ODOR/FUME/GAS ADSORBING AIR FILTERS
HIGH DENSITY CARBON PACKS &
HIGH DENSITY CARBON OR ALUMINA WITH POTASSIUM PERMANGANATE
Model #CWC contains granular carbon in flexible nylon mesh, that will not settle
Gas phase, 60% minimum activity, granular carbon with nearly 5 million square foot of surface area per pound
Moisture resistant beverage board die cut frame with stabilizer face grids and wire reinforcement available
Three stage filtration—some models come with 3/4” polyester prefilter for particulates and polyurethane foam after-filter to capture remaining
particulates and prevent carbon from entering air stream
Model #CWB contains two types of sorptive media, equal amounts of impregnated activated alumina with potassium permanganate and activated
carbon bonded within a media for a uniform bed
Light gas removal includes Ammonia, Formaldehyde, Hydrogen Sulfide and Sulfur Dioxide
Odor removal includes organic based odors
UL Classified as to Flammability Only
-28-
Model # Filter Media Initial Air Flow
Resistance
Avg. Arrestance
Efficiency
Dust Holding
Capacity
Carbon/
Sq. Ft.
Alumina/
Sq. Ft.
CWC 300 Carbon 0.23”/0.22” * N/A N/A 300 gms None
CWC 600 Carbon 0.43” N/A N/A 600 gms None
CWB 375 Carbon/Alumina/
KMN04
0.25”/0.31” * 80-86% 235 gms 150 gms 225 gms
CWB 750 Carbon/Alumina/
KMN04
0.47” N/A N/A 300 gms 450 gms
*Resistance with polyester prefilter
SIZE
#CWCPO300
UNFRAMED
PAD
LIST $
#CWCCO300
FRAMED
PAD
LIST $
#CWCCC300
FRAMED PRE/
AFTERFILTER
LIST $
#CWBPO375
UNFRAMED
PAD
LIST $
#CWBCO375
FRAMED
PAD
LIST $
12X24X1” 63.61 99.32 75.25 85.89 104.99
16X20X1” 69.25 112.55 80.91 98.97 121.61
16X25X1” 77.53 115.98 82.08 100.83 122.04
18X24X1” 80.14 119.68 83.52 104.99 126.86
20X20X1” 77.53 115.98 82.08 100.83 122.04
20X24X1” 84.31 125.67 86.66 109.15 134.72
20X25X1” 86.66 127.97 87.33 113.62 137.74
24X24X1” 93.34 140.00 93.34 123.84 149.76
SIZE
#CWCPO600
UNFRAMED
PAD
LIST $
#CWCCO600
FRAMED
PAD
LIST $
#CWBCC375
FRAMED PRE/
AFTERFILTER
LIST $
#CWBPO750
UNFRAMED
PAD
LIST $
#CWBCO750
FRAMED
PAD
LIST $
12X24X2” 104.22 116.07 118.17 131.71 157.61
16X20X2” 114.79 136.30 137.24 153.63 185.72
16X25X2” 129.47 150.93 139.24 157.68 189.96
18X24X2” 133.27 146.53 143.69 162.58 197.80
20X20X2” 129.47 141.26 139.24 157.68 189.96
20X24X2” 143.07 155.72 152.37 175.19 210.51
20X25X2” 146.87 159.52 155.32 180.47 216.55
24X24X2” 160.73 188.77 170.44 199.45 241.41
ODOR/FUME ADSORBING AIR FILTERS
DISPOSABLE GRANULAR FILLED
Disposable Honeycomb
Granular Carbon or Potassium Permanganate Filled
Initial Air Flow Resistance 1/2” 0.06” w.g.
1” 0.16” w.g.
2” 0.28” w.g.
3/8”, 1/2”, 1” and 2” thick filters
Filters contain fill percent of 50% (higher fill is available):
C—Granular Carbon for general odor control and removal of volatile organic compounds
ZK—Potassium Permanganate for gaseous contaminants including hydrogen sulfide, sulfur dioxide,
formaldehyde, ethylene, mercaptan and alcohol; applications include cold fruit storage, compressor
intakes, exhaust systems and general HVAC applications
Constructed of corrugated kraft cell and surrounded by a galvanized metal frame; sealed with adhesive
UL Classified as to Flammability Only
ALL SIZES
ACTIVATED CARBON FILTER
SIZE SQ IN 3/8” MODEL LIST $ 1/2” MODEL LIST $ 7/8” MODEL LIST $ 1-7/8” MODEL LIST $
0-100 HCC100-3/8 35.95 HCC100-1/2 35.95 HCC100-1 35.95 HCC100-2 35.95
101-200 HCC200-3/8 35.95 HCC200-1/2 35.95 HCC200-1 42.52 HCC200-2 60.26
201-300 HCC300-3/8 35.95 HCC300-1/2 40.06 HCC300-1 62.89 HCC300-2 91.48
301-400 HCC400-3/8 41.01 HCC400-1/2 47.84 HCC400-1 76.36 HCC400-2 121.86
401-500 HCC500-3/8 48.75 HCC500-1/2 57.28 HCC500-1 92.85 HCC500-2 138.80
501-600 HCC600-3/8 52.44 HCC600-1/2 62.92 HCC600-1 100.43 HCC600-2 146.20
601-700 HCC700-3/8 58.08 HCC700-1/2 68.76 HCC700-1 114.33 HCC700-2 174.52
POTASSIUM PERMANGANATE FILTER
SIZE SQ IN 3/8” MODEL LIST $ 1/2” MODEL LIST $ 7/8” MODEL LIST $ 1-7/8” MODEL LIST $
0-100 HCZK100-3/8 35.95 HCZK100-1/2 35.95 HCZK100-1 35.95 HCZK100-2 35.95
101-200 HCZK200-3/8 35.95 HCZK200-1/2 35.95 HCZK200-1 48.85 HCZK200-2 64.58
201-300 HCZK300-3/8 37.38 HCZK300-1/2 43.15 HCZK300-1 73.01 HCZK300-2 102.01
301-400 HCZK400-3/8 44.32 HCZK400-1/2 51.79 HCZK400-1 89.27 HCZK400-2 125.00
401-500 HCZK500-3/8 52.83 HCZK500-1/2 61.99 HCZK500-1 109.03 HCZK500-2 150.41
501-600 HCZK600-3/8 57.28 HCZK600-1/2 67.11 HCZK600-1 116.24 HCZK600-2 159.80
601-700 HCZK700-3/8 63.16 HCZK700-1/2 74.89 HCZK700-1 145.09 HCZK700-2 200.17
-29-
ODOR/FUME ADSORBING AIR FILTERS
BULK CARBON & ZEOLITE FILLED TRAYS
V-Bank Housing Trays and Replacement Carbon
Adsorbent filled filters for heavy duty air cleaners, fume hoods & special odor control applications
100% filled trays (packed beds) can be used in both front and side access housings
Bulk carbon is available in 25 lb Activated Carbon & 40 lb Zeolite with Potassium
Carbon products available in:
Model AC—Carbon for general odors including VOC’s and Ozone
Model ZK6—Zeolite with Potassium Permanganate (5-6%) for light gas including Hydrogen Sulfide,
Sulfur Dioxide, Formaldehyde, Ethylene, Mercaptan and Alcohol
V-Bank configuration provides an even bed thickness and reduces bypass
CHEMICAL COMPOUND AFFINITY CHART
Acetic Acid AC ZK6
Acetone AC
Acrolein ZK6
Aldehyde AC ZK6
Amines ZEO
Ammonia ZEO
Benzene AC
Chlorine AC
Ethyl Alcohol AC
Formaldehyde ZK6
Gluteraldehyde ZK6
Hydrogen Cyanide ZK6
Hydrogen Sulfide ZK6
Methyl Alcohol AC
Mercaptqan AC ZK6
Methylene Chloride AC
Methyl Ethyl Ketone AC
Nitric Oxide ZK6
Nitrogen Dioxide ZK6
Ozone AC
Sulfur Dioxide ZK6
Sulfur Trioxide ZK6
Toluene AC
Volatile Organic Compounds AC
BULK REPLACEMENTS
MODEL LIST $
ACCS-BULK Coconut Shell Carbon
25 lbs/5 gal Pail
6.07/lb
ACCP-BULK Coal Pellet Carbon
25 lbs/5 gal Pail
5.37/lb
ZEO-BULK Zeolite
40 lbs/5 gal Pail
6.41/lb
ZK6-BULK Zeolite with Potassium Permanganate
40 lbs/5 gal Pail
12.87/lb
V BANK METAL FILLED TRAYS
MODEL SIZE LIST $
VB2424-1 24X24X1” 8# Carbon/Tray 148.31
VB1224-1 12X24X1” 4# Carbon/Tray 98.88
VB2424-2 24X24X2” 17# Carbon/Tray 216.78
VB1224-2 171.13 12X24X2” 8.5# Carbon/Tray
VBSPEC1 Custom Sizes 1” CALL
VBSPEC2 Custom Sizes 2” CALL
-30-
ODOR/FUME ADSORBING MEDIA-PADS & SERVICE ROLLS
ACTIVATED CARBON COATED NON-WOVEN POLYESTER—3.2-150
ACTIVATED CARBON COATED NON-WOVEN POLYESTER—6.0-150
-31-
SERVICE ROLL PART #
LIST $
LYD 28.43
ROLL 2,843.57
ACF-3.2-150-48”
PAD CUT-TO-FIT SIZE PART #
LIST MULTIPLIER*/SQ IN
PAD-ACF3.2
0.017
SERVICE ROLL PART #
ACF-6.0-150-48”
LINEAR FOOT PART #
PAD-ACF6.0
0.018
Multiply square inches by multiplier; discounts apply
Minimum net price per pad $1.00
Minimum order amount $50.00
Custom slitting $30.25/roll LIST—full roll only
Other media coatings available on request-call for pricing
UL Classification: As to Flammability Only
Coating Weight: 4.8 +/- 0.72 ounces carbon per sq yd
Media Thickness: .187”
Total Product Weight: 8.0 +/- 1.2 ounces per sq yd
Media Color: Black
Coated Thickness: 3/16” nominal +/- 0.03 inches
Media Weight: 3.2 ounces polyester per sq yd
Roll Size: Approx. 48” wide by 100 linear yards
Air Perm. (CFM) 650 +/- 100 CFM @ 0.5 in. w.g.
UL Classification: As to Flammability Only
Coating Weight: 6.0 +/- 1.35 ounces carbon per sq yd
Media Thickness: .45”
Total Product Weight: 15.0 +/- 2.25 ounces per sq yd
Media Color: Black
Coated Thickness: 1/2” nominal +/- 0.07 inches
Media Weight: 6.0 ounces polyester per sq yd
Roll Size: Approx. 48” wide by 50 linear yards
Air Perm. (CFM) 650 +/- 100 CFM @ 0.5 in. w.g.
LIST $
LYD 32.00
ROLL 1,600.16
LIST MULTIPLIER*/SQ IN
NON-WOVEN POLYESTER MEDIA—PADS & SERVICE ROLLS
NON-WOVEN POLYESTER—1/4” DRY TYPE
NON-WOVEN POLYESTER—1/2” DRY TYPE
NON-WOVEN POLYESTER—1” DRY TYPE
UL Classification: As to Flammability Only
Media Thickness: .25”
Media Weight: 3.4 ounces/square yard
Temperature Rating: Melting 230° F
Media Color: White
Roll Sizes: Approx. 60” wide by 90 linear yards
Approx. 30” wide by 90 linear yards
Initial Resistance: 0.06 in. w.g.
SERVICE ROLL PART #
60” LIST $
LYD 8.36
ROLL 752.40
NWPEWHT-.25-60”
NWPEWHT-.25-30”
PAD CUT-TO-FIT SIZE PART #
LIST MULTIPLIER*/SQ IN
PAD-NWPEWHT.25
.0053
NWPEWHT.50
SERVICE ROLL PART #
LIST $
LYD 9.22
ROLL 414.90
PAD-NWPEWHT.50
PAD CUT-TO-FIT SIZE PART #
LIST MULTIPLIER*/SQ IN
.0053
NWPEWHT-.75-60”
NWPEWHT-.75-30”
SERVICE ROLL PART #
60” LIST $
LYD 11.21
ROLL 320.45
LIST MULTIPLIER*/SQ IN
PAD-NWPEWHT.75
.0063
Multiply square inches by multiplier; discounts apply
Minimum net price per pad $1.00
Minimum order amount $50.00
Custom slitting $30.25/roll LIST—full roll only
-32-
30” LIST $
LYD 4.12
ROLL 370.80
UL Classification: As to Flammability Only
Media Thickness: .50”
Media Weight: 3.2 ounces/square yard
Temperature Rating: Melting 230° F
Media Color: White
Roll Sizes: Approx. 60” wide by 45 linear yards
Initial Resistance: 0.13 in. w.g.
UL Classification: As to Flammability Only
Media Thickness: .75” - 1.0”
Media Weight: 5.9 ounces/square yard
Temperature Rating: Melting 230° F
Media Color: White
Roll Sizes: Approx. 60” wide by 30 linear yards
Approx. 30” wide by 30 linear yards
Initial Resistance: 0.17 in. w.g.
30” LIST $
LYD 5.50
ROLL 157.24
PAD CUT-TO-FIT SIZE PART #
NON-WOVEN POLYESTER MEDIA—PADS & SERVICE ROLLS
NON-WOVEN POLYESTER—1/2” TACK TYPE
NON-WOVEN POLYESTER—1” TACK TYPE
NON-WOVEN POLYESTER—2” TACK TYPE
UL Classification: As to Flammability Only
Media Thickness: .50”
Media Weight: 4.8 ounces/square yard
Temperature Rating: Melting 230° F
Media Color: Blue/White
Roll Sizes: Approx. 92” wide by 45 linear yards
Initial Resistance: 0.11 in. w.g.
UL Classification: As to Flammability Only
Media Thickness: 1.0”
Media Weight: 6.4 ounces/square yard
Temperature Rating: Melting 230° F
Media Color: Blue/White
Roll Sizes: Approx. 92” wide by 30 linear yards
Initial Resistance: 0.18 in. w.g.
UL Classification: As to Flammability Only
Media Thickness: 2.0”
Media Weight: 10 ounces/square yard
Temperature Rating: Melting 230° F
Media Color: Blue/White
Roll Sizes: Approx. 92” wide by 20 linear yards
Initial Resistance: 0.16 in. w.g.
-33-
SERVICE ROLL PART #
LIST $
LYD 9.81
ROLL 441.45
NWPEB/W.5”
PAD CUT-TO-FIT SIZE PART #
LIST MULTIPLIER*/SQ IN
PAD-NWPEB/W-.5”
.0053
SERVICE ROLL PART #
LIST $
LYD 11.04
ROLL 331.20
NWPEB/W1”
PAD CUT-TO-FIT SIZE PART #
LIST MULTIPLIER*/SQ IN
PAD-NWPEB/W1.0”
.0074
SERVICE ROLL PART #
LIST $
LYD 26.34
ROLL 526.80
NWPEB/W-2”
PAD CUT-TO-FIT SIZE PART #
LIST MULTIPLIER*/SQ IN
PAD-NWPEB/W2.0”
.011
Multiply square inches by multiplier; discounts apply
Minimum net price per pad $1.00
Minimum order amount $50.00
Custom slitting $30.25/roll LIST—full roll only
WOVEN ELECTROSTATIC MEDIA– PADS & SERVICE ROLLS
BLACK POLYPROPYLENE—HUCKABACK
PERMACOOL® BLACK CORRUGATED POLYPROPYLENE
-34-
BHB12
SERVICE ROLL PART #
LIST $
LYD 9.94
ROLL 2,982.00
PAD CUT-TO-FIT SIZE PART #
LIST MULTIPLIER*/SQ IN
PAD-BHB12
.008
Type of Weave: Huckaback
Initial Resistance: 0.02 in. w.g.
UL Classification: As to Flammability Only, FMVSS302
Avg. Arrestance Efficiency: 42%
Yarn Diameter: 12 mil
Dust Holding Capacity: 59 grams
Yarn Count (warp/fill): 30/20
Air Perm. (CFM): 1350
Media Thickness: 45 mils
Media Weight: 4.3 ounces per sq yd
Temperature Rating: Operating 180° F; Melting 325-350° F
Roll Size: Approx. 60” wide by 300 linear yards
Multiply square inches by multiplier; discounts apply
Minimum net price per pad $1.00
Minimum order amount $50.00
Sonic Sewing: $.20/Linear inch-LIST ($10.00 minimum charge)
Edges of media can be finished with varying width sonic sewn edges priced by linear inch.
To calculate linear inch total length of all sides of filter edges, i.e. 12” X 24” Filter = 12 + 12 + 24 + 24 = 72 linear inches = $14.40 per filter LIST
SERVICE ROLL PART #
LIST $
LYD 106.41
ROLL 3,724.35
PCOOLMEDIA
PAD CUT-TO-FIT SIZE PART #
LIST MULTIPLIER*/SQ IN
PAD-PCOOL
.042
Type of Weave: 3-D Waffle Corrugated
Initial Resistance: 0.04 in. w.g.
UL Classification: As to Flammability Only
Avg. Arrestance Efficiency: 63%
Yarn Diameter: 10 mil
Dust Holding Capacity: 100 grams
Yarn Count (warp/fill): 65/74
Air Perm. (CFM): 1230
Media Thickness: .25”
Media Weight: 10.1 ounces per sq yd
Temperature Rating: Operating 180° F; Melting 325-350° F
Roll Size: Approx. 90” wide by 35 linear yards
WOVEN ELECTROSTATIC MEDIA-PADS & SERVICE ROLLS
BLACK OR NATURAL POLYPROPYLENE—HONEYCOMB
NATURAL POLYPROPYLENE—HI LOFT HONEYCOMB
-35-
SERVICE ROLL PART #
LIST $
LYD 13.98
ROLL 4,194
BHC12
PAD CUT-TO-FIT SIZE PART #
LIST MULTIPLIER*/SQ IN
PAD-BHC12
.0088
SERVICE ROLL PART #
MEDIA-WHC20
PAD CUT-TO-SIZE PART #
LIST MULTIPLIER*/SQ IN
PAD-WHC20
.022
Multiply square inches by multiplier; discounts apply
Minimum net price per pad $1.00
Minimum order amount $50.00
Sonic Sewing: $.20/Linear inch-LIST ($10.00 minimum charge)
Edges of media can be finished with varying width sonic sewn edges priced by linear inch.
To calculate linear inch total length of all sides of filter edges, i.e. 12” X 24” Filter = 12 + 12 + 24 + 24 = 72 linear inches = $14.40 per filter LIST
Type of Weave: Honeycomb
UL Classification: As to Flammability Only
Yarn Diameter: 12 mil
Yarn Count (warp/fill): 30/32
Media Thickness 70 mils
Temperature Rating: Operating 180° F; Melting 325-350° F
Roll Sizes: Approx. 62” wide by 300 linear yards
Roll Weight: Approx. 170 lbs.
Roll Dimensions: Approx. 30” diameter x 65” length
(33.75 cu. ft)
Initial Resistance: 0.02 in. w.g.
Avg. Arrestance Efficiency: 38%
Dust Holding Capacity: 55 grams
Air Perm. (CFM): 1230
WHC12
PAD-WHC12
Type of Weave: Honeycomb
Yarn Diameter: 20 mil
Media Thickness: .50”
Media Weight: 10.1 oz/yd²
Temperature Rating: Operating 180° F; Melting 325-350° F
Roll Sizes: Approx. 80” wide by 50 linear yards
Roll Weight: Approx. 107 lbs
Roll Dimensions: Approx. 19” diameter x 84” length
(60.42 cu. ft.)
Air Perm. (CFM): 1300
UL Classification: As to Flammability Only
LIST $
LYD 21.74
ROLL 1,087.00
HIGH ABRASION & HAIL GUARD NETTING
BLACK PVC COATED HIGH ABRASION MEDIA
BLACK HAIL GUARD NETTING
-36-
SERVICE ROLL PART #
LIST $
LYD 16.99
ROLL 1,699.02
BHA9X9
PAD CUT-TO-FIT SIZE PART #
LIST MULTIPLIER*/SQ IN
BHA9X9
.010
SERVICE ROLL PART #
LIST $
ROLL 233.58
HAILSTOP50
LINEAR FOOT PART #
LIST/LFT*
MEDIA-BPN54HG
$4.02
Multiply square inches by multiplier; discounts apply
Minimum net price per pad $1.00
Minimum order amount $50.00
Type of Weave: 9x9 1000 Denier Multi Polymer Coated
Polyester Mesh
Media Weight: 3.3 oz/yd²
Media Construction: 18x18 PPI UV Protected
Yarn Type: 12 mil FR Green PP
UL Classification As to Flammability Only
High Grab Tensil Strength: MD 115/CD 105-ASTM D 4632
Test Method
High Trapexoid Tear Strength: MD 55/CD 40-ASTM D 4633
Test Method
Mullen Burst Strength: 240—ASTM D 3786 Test Method
Roll Size: Approx. 61” wide by 100 linear yards
Roll Weight: Approx. 98 lbs
Roll Dimensions: Approx. 10” diameter x 61” length
Type of Weave: Rigid plastic netting with 3/8”
diamond shape openings
Media Weight: 3.3 oz/yd²
Media Construction:
UV Protected
Rot Resistant
Weather Resistant
Abrasion & Corrosion Resistant
Roll Size: Approx. 54” wide by 50 linear feet
Roll Weight: Approx. 30 lbs
Roll Dimensions: Approx. 10” diameter x 55” length
*1 Linear foot is 54” wide X 12” length
Volume pre cut to size pieces available by OEM quote only
BULK MEDIA—PADS & SERVICE ROLLS
20 PPI FOAM—1/4”, 1/2”, 3/8”
ALUMINUM—1/8”, 1/4”, 5/8”
-37-
PERMAFLO® - ALTERNATIVE TO HOGS HAIR
SERVICE ROLL
PART # THICKNESS
ROLL
SIZE
LIST $/
ROLL
FOAM-20 PPI-.25 .25” 48” X 120” 61.66
FOAM-20 PPI-.5 .50” 48” X 120” 90.23
FOAM-15 PPI-.375 .375” 48” X 100” 81.48
PAD CUT-TO-SIZE
PART # THICKNESS
LIST MULTIPLIER*/
SQ IN
PAD-FOAM.25 .25” .011
PAD-FOAM.5 .50” .023
PAD-FOAM.375 .375” .021
UL Classification: UL 900 As to Flammability
Only –Non Fire Retardant
Media: Polyether Polyurethane
Foam
Media Color: Charcoal
Cell Count: 20 (+/-5) Pores
Density, Apparent: 1.20 (+/-.20) lbs. pcf
Tensile Strength: 18 lbs. psi minimum
Tear Strength: 5.0 lbs. psi minimum
Volumetric Air Flow Rate: 18 (+/-3) cfm
SERVICE ROLL
PART # THICKNESS ROLL SIZE
LIST $/
LFT
LIST $/
ROLL
ALUMCOR.125-19” .125” corrugated 19.5” X 178’ 2.25 400.50
ALUMCOR.125-24” .125” corrugated 24.5” X 178’ 2.82 501.96
ALUMCOR.25-19” .25” corrugated 19.5” X 146’ 2.74 400.04
ALUMCOR.25-24” .25” corrugated 24.5” X 146’ 3.44 502.24
ALUMCOR.625-24” .625” corrugated 24.5” X 100’ 3.01 301.00
ALUMMESHFLAT-19” flat 19.125” X 200’ 2.27 454.00
ALUMMESHFLAT-24” flat 24.5” X 200’ 2.86 572.00
ALUM.25-19” .25” bonded 19.5” X 50’ 5.09 254.50
ALUM.25-24” .25” bonded 24.5” X 50’ 6.78 339.00
ALUM.25-40” .25” bonded 40” X 50’ 8.56 428.00
ALUM.625-19” .625” bonded 19.5” X 50’ 9.28 464.00
ALUM.625-24” .625” bonded 24.5” X 50’ 11.73 586.50
ALUM.625-40” .625” bonded 40” X 50’ 13.49 674.50
UL Classification: As to Flammability Only
Media: 20 Gauge Corrugated Aluminum,
Aluminum Mesh, Bonded
PAD CUT-TO-
SIZE PART # THICKNESS
LIST MULTIPLIER*/
SQ IN
PAD-ALUM.25 .25” bonded .038
PAD-ALUM.625 .625” bonded .065
SERVICE ROLL
PART # THICKNESS
ROLL
SIZE
LIST $/
ROLL
PFLO1/2-ROLL25 .50” 25” X 48’ 191.02
PFLO1/2-ROLL48 .50” 48” X 48’ 366.64
PFLO1-ROLL25 1.00” 25” X 36’ 153.09
PFLO1-ROLL30 1.00” 30” X 36’ 183.71
PFLO1-ROLL48 1.00” 48” X 36’ 293.93
PFLO1-ROLL72 1.00” 72” X 36’ 440.88
PAD CUT-TO-
SIZE PART # THICKNESS
LIST MULTIPLIER*/
SQ IN
PAD-PFLO.5” .50” .032
PAD-PFLO1” 1.00” .036
UL Classification: As to Flammability
Only FMVSS302
Media: Polyester
Media Color: Blue
Media Density: Rigid Pad, Needs No
Frame
Initial Resistance: 1/2” Thick: 0.03” w.g. 1” Thick: 0.09” w.g.
Avg. Arrestance
Efficiency: 1/2” Thick: 69% 1” Thick: 84%
Dust Holding
Capacity: 1/2” Thick: 359 gm. 1” Thick: 229 gm.
Multiply square inches by multiplier; discounts apply—Minimum net price per pad $1.00
Minimum order amount $50.00—Custom slitting $30.25/roll LIST—full roll only
STABILIZING AND HOLDING FRAMES
-38-
PAD STABILIZING FRAME
SIZE
SQ IN
MODEL
STAB 1/2”
& 1”
LIST $
MODEL
STABHD
1/2” & 1”
LIST $
MODEL
STAB
2”
LIST $
MODEL
STABHD
2”
LIST $
0-100 17.13 20.30 17.35 23.50
101-200 18.27 23.50 18.60 27.67
201-300 19.41 27.67 20.09 33.63
301-400 20.47 32.45 21.84 38.02
401-500 21.76 35.23 22.52 41.78
501-600 28.21 38.02 32.65 44.99
601-700 37.96 44.77 38.57 50.34
701-800 38.62 52.62 44.61 58.36
801-900 46.02 72.84 47.26 82.13
901-1000 48.88 80.59 49.61 90.89
Stabilizing Frame For Any Type Of Filter Media
.02 gauge (MODEL STAB) or heavy duty 24 gauge
(MODEL STABHD) galvanized steel frame with expanded
metal support grid on one side
Use in filtration application involving media pad change
outs
2 criss crossed wire supports to hold media pad into stabi-
lizing frame
Add 23% for stainless steel or aluminum
5 Year Warranty
-STABHD lead time 3 weeks—Filters over 30” add 10%; 50” add
20%; 70” add 30%
-Cut media pads are available—see Bulk Media pages 31-37 for
pricing. Foam, Non-woven Polyester, Activated Carbon, Perma-
Flo, Aluminum, Polypropylene
FILTER CHANNEL
Channel List Price per Linear Ft—8’ Std Length
MODEL MATERIAL
1/4”
LIP
LIST $
1/2”
U
LIST $
1”
U
LIST $
2”
U
LIST $
CHANNELGALV Galvanized 0.84 0.99 1.06 1.16
CHANNELSS Stainless 1.86 2.28 2.51 2.69
CHANNELALUM Aluminum 2.09 2.57 2.89 3.08
Rigid Installation of Filter Banks
NS-50
Holding frame designed for small banks and individual use
where straight sides are required on a holding frame
16 gauge galvanized steel, the frame is pre-punched for
bolt at assembly (aluminum and stainless steel available
upon request)
NS-100
Holding frame designed for building either small or large
filter banks to hold a wide range of filters; straight or “V”
bank construction
An interlocking lip provides a solid, durable, vibrationless
filter bank, simple yet economical to erect
Lip construction on two sides of frame join with male sides
of adjacent frames for rigidity
Foam gasket included to apply on inside lip preventing air
by-pass between the frame and the filter
16 gauge galvanized steel with galvanized Ludwig clips
spring loaded to hold filter firmly in place (16 gauge alumi-
num available upon request)
SIZE
MODEL
NS-50
MODEL
NS-100
16X20X2 1/8” 23.15 33.81
16X25X2 1/8” 24.49 36.64
20X20X2 1/8” 24.49 36.64
20X24X2 1/8” 25.98 40.31
20X25X2 1/8” 25.98 40.31
24X24X2 1/8” 26.65 44.81
12X24X2 1/8” 21.98 33.81
FILTER HOLDING FRAMES
-Special sizes available—call for pricing
-All sizes are made to the exact size. Filters are generally under-
sized by approximately 1/2” so the holding frame is full sized
-Channels longer than 8’ must ship Common Carrier
-1/4” channel requires press down to finished size
AIR FILTER ACCESSORIES AND SCREENS
-39-
VINYL PULL TABS
Vinyl cloth strip—3/8” W X 1-1/2” L
Installation included
PROTECTION SCREENS
Galvanized Steel Wire Mesh
Rectangular wire mesh with various wire thickness
1/4” galvanized steel frame standard
Model EPS-XM—strong/economical .030” expanded
mesh; 1-1/4” X 5/8” open grid pattern
Aluminum & stainless frames available; call for pricing
SIZE SQ IN
MODEL
EPS-XM
LIST $
0-100 9.37
101-200 14.34
201-300 16.71
301-400 18.45
401-500 20.21
501-600 22.05
601-700 23.57
701-800 25.13
801-900 26.88
901-1000 28.55
-Convert to 1/2” or 1” thick “C” frame; add $9.21
-2 week lead time on .063 mesh
-Custom screen framing available
HANDLE—BAIL
Handles may be used on most permanent type
filters and are easily attached to filter with rivets
Manufactured with heavy galvanized steel wire and
shaped into an oval that can be laid flat against filter
or pulled out so it can be easily grasped
3-5 day installation
MODEL LIST $
Handle Bail (Attached) 3.23/ea
Handle Rigid (Attached) 10.85/ea
RINGHANGER PULL TABS
Small Pull Tab
for 1/4” or 1/2”
framed filter
Large Pull Tab for 1”
framed filter
Zinc plated metal
Installation included
MODEL LIST $
PULLTAB-RING.5
Small Pull Tab Attached
1.72
PullTAB-RING1
Large Pull Tab Attached
1.90
Permatron, a pioneer in the electrostatic air filtration field, combines precision engineering and product
diversification to effectively meet indoor air quality challenges. A privately owned business, Permatron
provides manufacturing services through an experienced staff, specializing in the design and production of air
filtration products. The result is a complete line of standard and custom sized particulate and odor/fume
removing air filters for OEM, commercial, industrial and residential applications.
From the paper mills on the west coast to the textile mills on the east coast, Permatron manufactures the
original industrial workhorses of permanent, washable electrostatic air filtration. Utilizing the principle of a
unitized filter bank, our Models IN and HFA outperform and outlast metal mesh filters in many heavy-duty
industrial applications. The benefits of cleanability and long-term durability in high velocity systems or caustic
environments gives customers the least cost over useful life, energy efficiency and an environmentally
friendly solution to their air filtration needs.
Unique filter construction sets us apart from look alike competitors. Manufactured the same way since being
introduced in 1957, many of our filters feature an exclusive Accumulator Chamber® design. Engineered with
a three-stage filtration process, the air filter maintains a high dirt holding capacity without face loading or
restricting airflow requirements. Multiple filtration panels are encased within an outer steel frame building a
multi-stage filter bank. The first panel acts as a prefilter. When particulates build-up on the prefilter, airflow
causes them to break off and be swept into the Accumulator Chamber® where turbulence and electrostatic
forces cause agglomeration into even larger particulates. These particulates are too large to pass through the
second panel. The afterfilter attracts and holds smaller particulates that may have escaped the prefilter, or did
not respond to an electrostatic charge. The filter design is easy to clean and usually outlasts the system that
it’s been installed in.
From the simple to the complex, prototype to high volume production, we maintain a tradition of quality,
performance, and on-time delivery. Our manufacturing capabilities include a variety of metal forming,
fabricating and assembly processes. We produce air filters in a variety of materials including plastic, vinyl,
aluminum, galvanized, painted, and stainless steel. A diverse range of synthetic media is available, including
wool, polyester, polypropylene, rayon nylon, and other synthetic fibers and foams. Synthetic media substrates
can also be impregnated with finely ground coatings for odor/fume removing applications. Customized
filtration needs can be met by varying the densities, number of layers and types of media depending on
airflow restriction, efficiencies required and budget parameters. Expertise in filtration, assisting in product
design, and manufacture of product to precise specifications are what keep long-term customers coming back
with new applications.
1-800-882-8012
www.permatron.com
E-mail: [email protected]
Effectively Cleaning the Air Since 1957.
See case histories at www.permatron.com
©2015 Permatron Corporation PRICE BOOK