2015-Marc-General

MARC SOUCY1-800-268-3508 x136

[email protected]

ATLANTIC CANADA LINECARD

[email protected] • 1-800-268-3508 • ISO 9001 CERTIFIED

INDUSTRY | Oil & GasNot all products are available in every territory. Please consult your area sales representative for more information.

ARI Air Release Valves ■ High air discharge air release valve ■ Patented conical body design ■ Threaded and flanged ends ■ Combination air/vacuum ■ Kinetic/automatic air release ■ 1” to 8”

Auma Electric Actuators and Valve Gearboxes ■ Multi-turn, quarter-turn actuators and gearboxes ■ Lever and linear actuators ■ Up to 250,000 ft-lbs.

BLAC Inc. Hydraulic Power and Control Units (HPUs/HCUs) ■ Hydraulic actuation for performance, efficiency, and control

■ Extensive upgrading capabilities for existing systems ■ Customized to suit any application ■ Available in remote mounting configuration or direct to drive cylinder assembly

Boehmer Fully Welded Ball Valves ■ Pipeline ball valve, double block & bleed ■ Natural gas transmission/distribution ■ Oil and gas ■ Emergency sealant injection, PMSS sealing system ■ 2” to 56” ■ ASME 150 to 2500 class

Boehmer District Heating Ball Valves ■ Fully welded design ■ Forged steel material with full penetration weld construction

■ Full or reduced port ■ 2” to 48” ■ ASME 150 (285 psi)

Cera Ceramic Ball and Sliding Disc Valves, Pipes and Elbows

■ For high wear, corrosive and thermal shock applications ■ Ceramic seats, balls and liners ■ On/off and control applications ■ ½” to 8” ■ ASME 150 to 300 class

Conval Camseal Ball Valves ■ Metal seated, unibody construction ■ Zero leakage ■ Top entry pressure seal ■ In-line renewable ■ ½” to 4” ■ Up to ASME 4500 class

Conval Clampseal™ Globe Valves ■ Available in angle, Y, or T pattern ■ Pressure -assisted seal bonnet ■ In-line repairable ■ ½” to 4” ■ Up to ASME 4500 class

Conval Throttling Valves ■ Easy to read position indicator ■ Pressure -assisted seal bonnet ■ Replaceable seat/venturi ■ Available in tandem configuration ■ ½” to 4” ■ Up to ASME 3500 class

Conval/HILTAP High Pressure/Temperature Vents and Drains ■ Hydrocarbon vents and drains ■ Secondary leak containment ■ Pressure -assisted seal bonnet ■ ¾” to 2” ■ Up to ASME 4500 class

General | INDUSTRY


Not all products are available in every territory. Please consult your area sales representative for more information.

Dragon 2Y Needle Valves ■ High pressure/temperature ■ Carbon and 316 stainless steel ■ Metal-to-metal seat (stellite seat available) ■ ¼”, ⅜”, ½” ■ ASME 2500 class; up to 1125°F

Fossil Power Systems

Aquarian Electronic Level Indicators ■ No moving parts ■ Solid state electronics & two-colour display ■ NEMA 4x enclosure ■ Swaged style high pressure brazed probe ■ Various electronic models available to support 1 through 48 probe levels

■ Probe rating 3000 psi @ 1200°F


Aquarian Visual Gauges ■ Bi-coloured ported gauge with LED illuminator ■ No hot retorquing ■ Double mica provides extended port life ■ Fulfills ASME Boiler & Pressure Code 1 PG-60 ■ Flat glass and reflex gauges for lower pressure ■ Up to 3000 psi


Ball Valves ■ CSA/FM/API approved ■ Automatic or manual ■ ¼” to 2” NPT, SW, and BW ■ ½” to 6” Flanged ■ Up to 300 class

HILTAP RapidLok™ Series Safety Quick Couplings ■ Metal-to-metal seal ■ Leakproof operation ■ Safe venting of residual pressure ■ ¼” to 6” ■ Equal to ASME 900/1500/2500

HORA Attemperators/Desuperheaters ■ Types: Multi-nozzle spray (standard and cooled); Steam atomized; Venturi

■ Venturi nozzles atomize spray water ■ Integral pressure control ■ Electric and pneumatic actuation ■ ASME 600 to 2500 class

HORA Automatic Pump Recirculation Valves ■ Minimum flow ■ Ensures pump protection ■ No pneumatic or electrical connections ■ 1¼” to 8”, larger sizes available ■ ASME 150 to 1500 class

HORA Control Valves ■ High and low load designs ■ Water, feedwater and steam ■ Buttweld or flange connection ■ Pneumatic, electric or hydraulic actuation ■ Up to 8” ■ ASME 300 to 2500 class

HORA Steam Conditioning Valves ■ Suitable for combined pressure reducing and desuperheating

■ Globe, angle or z-style ■ Carbon steel, stainless steel and other alloys ■ Buttweld or flanged ends ■ Up to ASME 1500 class

HORA Turbine Bypass Systems ■ Custom engineered ■ 100% of capacity of turbine ■ High/intermediate/low pressure


INDUSTRY | GeneralNot all products are available in every territory. Please consult your area sales representative for more information.

Onyx Duck Bill Check Valves ■ Exterior mount or internal installation ■ Flanged or slip-on connection ■ Open and enclosed designs ■ NSF approved ■ 1” to 60”

Onyx Expansion Joints ■ Prevents pipe displacement/stress and reduces noise and vibration

■ Customizable to suit the application ■ Single or multiple arch ■ Standard design ships from stock

Persta High Pressure Valves ■ Gate, globe, check and line blinds ■ Forged steel and alloy ■ ½” and larger ■ ASME 900 to 4500 class

SchuF/Fetterolf Cam-Set, Cam-Slide, Stacey Line Blinds ■ Positive isolation; fast changeover ■ No flange separation required for Cam-Set/Slide ■ Buttweld and flanged ends ■ Carbon and stainless steel ■ Up to 60”, largers sizes upon request ■ ASME 150 to 1500 class, higher upon request

SchuF Changeover Valves ■ Tandem changeover valve design ■ 1” to 14” ■ Up to ASME 2500 class

SchuF Disc Bottom Outlet Valves ■ Metal-to-metal positive shut-off ■ PTFE disc and seat optional ■ Disc lowering or rising design ■ Dead space free and crust breaking ■ 1” to 24” ■ Up to ASME 2500 class

Onyx Pinch Valves ■ Full round ■ Single pinch ■ Pre-pinched ■ Manual, electric, or pneumatic actuator ■ On/off and modulating service ■ ½” to 36”

Onyx Pressure Sensors ■ Modular seals for in-line maintenance ■ Up to 3 instruments per ring ■ Combinations to suit the application ■ Guaranteed to never clog or plug ■ Flanged, screw-on, tri-clover connections ■ Available with gauges, pressure switches, and transmitters

■ 1” to 42”

SchuF Liftplug Valves ■ Ideal for high temp. and highly abrasive, clogging applications

■ IsoPlug design: isolates media flow ■ SwitchPlug design: switches between 3 inlets ■ TruePlug design: double block and bleed in one enclosed body

■ Materials CS and C12A (to 36”) ■ Up to ASME 2500 class

SchuF Diverter Valves ■ 3,4,5 and multiple inlets and outlets ■ Metal-to-metal seated ■ Contoured ram, heating jacket, flushing ports optional ■ Diverse body designs ■ Dead space free ■ 1” to 18” ■ Up to ASME 2500 class

General | INDUSTRY


Not all products are available in every territory. Please consult your area sales representative for more information.

SchuF Severe Service Angle Control Valves ■ Tungsten carbide or ceramic trim ■ Cast or forged ■ Special body/trim material: titanium; Hastelloy; Inconel; tungsten carbide; ceramic

■ 1” to 36” ■ Up to ASME 2500 class

SchuF Ram Bottom Outlet Valves ■ Metal-to-metal positive shut-off ■ Self-draining and dead space free at inlet ■ Special body/trim materials: Titanium, Hastelloy, Duplex SS

■ Multistage and cage release design for pressure letdown optional

■ 1” to 24” ■ Up to ASME 2500 class

Stafsjo SLV/F/H/X Knife Gate Valves ■ Slurry and abrasive applications ■ Bi-directional ■ Full bore for max flow capacity ■ One- or two-piece body design ■ V: fully lugged F: fully flanged H: high pressure (up to 20 bar) X: higher pressure (up to 50 bar)

■ 2” to 48”

UVE - Slurry Tuff EZI-Vac Air Release/Vacuum Break Valve ■ Full bore design as standard ■ Simple design/easy maintenance ■ HDPE float ■ Carbon, stainless, duplex steel body ■ Rubber, EPDM, urethane lining ■ CWP of 20, 50 and 100 bar

UVE - Slurry Tuff Maxi-Check H High Pressure Ball Check Valve ■ For heavy duty service ■ Simple design/easy maintenance ■ Full bore design ■ Carbon, stainless steel body ■ Drip-tight sealing via primary seal ■ Rubber, EPDM, urethane lining ■ Up to 900 class

UVE - Slurry Tuff Maxi-Check I Non-return Isolation Valve ■ Two valves in one, non-return isolation ■ Simple design/easy maintenance ■ Carbon, stainless steel body ■ Drip-tight sealing via secondary seal ■ Vulcanized linings in rubber, EPDM, urethane ■ Up to 900 class

SchuF Sampling Valves ■ Metal-to-metal or PTFE positive shut-off ■ Non-clogging/dead space free ■ Ram and disc type ■ PTFE or graphite packing ■ Wafer and integral pipe design ■ Bottle systems available ■ ½” to 1½” ■ Up to ASME 600 class

Somas Ball Segment Valves ■ Control and on/off ■ Stainless steel and exotic alloys ■ Metal and soft seated ■ 1” to 10” standard, up to 28” ■ ASME 150 to 600 class

UVE - Slurry Tuff Maxi-Check L Low Pressure Ball Check Valve ■ Direct replacement for swing check face-to-face ■ Simple design/easy maintenance ■ Urethane coated ball with metal core ■ Carbon, stainless, duplex steel body ■ Rubber, EPDM, urethane lining ■ CWP of 25 bar

UVE - Slurry Tuff Penta-Wedge Slurry Gate Valve ■ Highly abrasive, wet or dry, service ■ Low maintenance/tight sealing ■ Boiler plate GR 460 body/bonnet ■ Face-to-face flexibility ■ Up to 900 class

Head Office126 Milner AvenueToronto, ON M1S 3R2tel 416-299-0780fax 416-299-0394

[email protected]

1-800-268-3508

Actuation Solutions and ServicesFrom sizing and selection to adaption and mounting, we provide a single source for complete valve assemblies for your most demanding valve applications. We have experience mounting the following brands of actuators:

Assembly and Function TestingOur technicians are factory-trained by our manufacturers and are available to perform routine maintenance and repair of Armour Valve supplied assemblies either at our warehouse or on-site at your facility.

In-house and On-site Service and RepairWe mount and stroke test all completed valve assemblies to ensure proper function and that required stroke times are met. Inspection reports are available upon request.

SERVICES

Western RegionOffice/Stocking Warehouse6, 2221-41 Avenue NECalgary, AB T2E 6P2tel 403-229-3171fax 403-245-9297

Sales RepresentativesAtlantic CanadaQuebec & LabradorOntario West/EastSaskatchewan Alberta Central/SouthFort McMurrayBritish Columbia

Ext131160133/134134161/162131137


For service, contact your local sales representative or [email protected]

2015-Marc-General

Documents

Transcript of 2015-Marc-General