The Bohning Company LTD.7361 N. 7 Mile Rd. Lake City, MI. 49657Phone: 231-229-4247 / Fax : 231-229-4615

www.bohning.com

The Bohning Company LTD.7361 N. 7 Mile Rd.Lake City, MI. 49657

Phone: 231-229-4247Fax : 231-229-4615www.bohning.com

Premium Paint For Jigs & Lures

Drying TimeOur paint will dry to the touch in about 10 min-

utes. Allow a minimum of 2 hours

between coats to allow solvents to evaporate. An

increase in temperature will speed up the drying

time. Temperatures of 130̊F to 140̊F will allow

solvents to “flash” off and decrease the drying time

of lures.

Safety PrecautionBohning Lure-Lac is a solvent based lacquer and is Bohning Lure-Lac is a solvent based lacquer and is

extremely flammable. Never paint in an area where

open flame is present.

This includes pilot lights on furnaces or gas hot

water heaters. Always work in a well

ventilated area. Use a NIOSH/MSHA

approved respirator for paints and organic vapors. approved respirator for paints and organic vapors.

Exhaust ventilation must beprovided with certi-

fied fans. Lure-Lac vapors are heavier than air and

will settle at floor level. Bohning Lure-Lac carries a

1 year shelf life. Use opened paint as soon as pos-

sible.

Bohning Lure-Lac can be sprayed or dipped. Both

methods will give you excellent results. Finish with

Bohning “Super Coat”, and you will have an armor

plated jig or lure. If your ready to give your jigs and

lures the best fish catching coat in the industry,

call us today.

Premium Lacquer Paint

For Jigs & Lures

Bohning Lure-Lac is a specially formulated lacquer Bohning Lure-Lac is a specially formulated lacquer

paint designed for both spraying and dipping jigs and

lures. This fast drying lacquer contains a high impact

polymer that bonds to a variety of surfaces including

lead and

lead-free jigs, plastic lure bodies, wood lure bodies and

many types of metal.

It’s even “worm-proof”!It’s even “worm-proof”!

Lure-Lac provides the finest, most durable finish avail-

able in the fishing lure industry. Tackle manufacturers

across the country are switching to Lure-Lac because of

its ability to withstand the toughest conditions...

and look great doing it!

With Bohning Lure-Lac, you’ll have the best

dressed jigs and lures in the business!

Base Coat ApplicationLure-Lac “Base White” functions as aprimer and is designed to cover in one coat.A base coat is highly recommended whenusing fluorescent colors due to their

translucent nature.

Top Coat ApplicationTop Coat ApplicationLure-Lac “Super Coat” is a chip-proofclear coat. It is used as a final coat overall Lure-Lac paints to enhance both

quality and durability.

Spinner Blades & SpoonsPlated or unplated spinner blades andspoons should be primed with a clearspoons should be primed with a clearprimer prior to painting. Apply clear

primer with an airbrush. We recommend using a Binks Wrenairbrush set at 30 psi. Allow 2-3 hoursdrying time between coats.

Fletch-Lac Clear Primer provides asuperior bonding surface for allsuperior bonding surface for allBohning lacquers and top coats.

Standard and Retarder ThinnerAvailable in Pints, Quarts, Gallons &

5 Gallons.

*Always use Bohning Lure-Lacthinner with Lure-Lac paint.Incompatibilities may occur fromIncompatibilities may occur fromusing thinners not suitedfor Lure-Lac paint.

DippingOur paint is shipped ready for dipping.Paint will perform best when storedat a temperature of 65̊F to 75̊F.Always stir paint well before dipping.Shaking will create excessive air bubbles.After stirring, allow 10-15 minutes for anyAfter stirring, allow 10-15 minutes for any

air bubbles to dissipate.

Airbrushing ApplicationWhen airbrushing with Lure-Lac paints,find the correct combination ofthinning levels, line pressure andenvironmental conditions.

•Lure-Lac Base White:Thin at a 1:1 ratio, with line pressure ofThin at a 1:1 ratio, with line pressure of

40 to 60 psi.

•Metallics:Thin at a 1:1 ratio, with line pressure of

20 to 30 psi.

•Flats, Fluorescents & Gloss:Thin at a 1:1.5 (thinner) ratio, with line

pressure of 20 to 30 psi.pressure of 20 to 30 psi.

Item # Size Price Retail

1700 1/2 Pint $7.84 $15.34

1701 Pint $12.65 $24.75

1702 Quart $22.19 $43.41

1703 Gallon $67.60 $132.26

17035 5-Gallon $304.20 $595.17

Item # Size Price Retail

1715 1/2 Pint $10.70 $20.93

1716 Pint $18.40 $35.99

1717 Quart $26.21 $51.29

1718 Gallon $97.56 $190.87

17185 5-Gallon $439.02 $858.92

Item # Size Price Retail

1705 1/2 Pint $7.84 $15.34

1706 Pint $12.65 $24.75

1707 Quart $22.19 $43.41

1708 Gallon $67.60 $132.26

17085 5-Gallon $304.20 $595.17

Base Coat : White Primer (WH)

Gloss : Black (BK), Blue (BL), Green (MG), Orange (OR), Red (RD), White (WH), Yellow (YE)

Fluorescent : Aurora Pink (AP), Blaze Orange (BO), Chartreuse (CH), Rocket Red (RR), Signal Green (SG), Saturn Yellow (SY)

Item # Size Price Retail

1720 1/2 Pint $9.00 $17.61

1721 Pint $14.56 $28.48

1722 Quart $25.59 $50.06

1723 Gallon $87.45 $171.10

17235 5-Gallon $393.52 $769.95

Item # Size Price Retail

1730 1/2 Pint $6.92 $13.55

1731 Pint $11.67 $22.84

1732 Quart $19.39 $37.94

1733 Gallon $55.19 $107.98

17335 5-Gallon $248.36 $485.91

Item # Size Price Retail

1711 Pint $8.54 $16.72

1712 Quart $12.78 $25.00

1713 Gallon $37.56 $73.49

17135 5-Gallon $168.53 $330.71

Thinner : Retarder Thinner (RT), Standard Thinner (ST)

Metallic : Copper (CO), Gold (GO), Pearl (PL), Silver (SL)

Supercoat (SC)