2014 Price List.pdf
-
Upload
candrapremana -
Category
Documents
-
view
250 -
download
0
Transcript of 2014 Price List.pdf
-
8/11/2019 2014 Price List.pdf
1/40
PRICE LIST MARCH 24, 2014
FLOMATIC CORPORATION
-
8/11/2019 2014 Price List.pdf
2/40
LOOK AT WHATS NEW!LOOK AT WHATS NEW!
High Quality Valves Built to Last... I www.flomatic.com
WHATSN
EW
AT
800.833.2040
Federal Lead Free Legislation -January 4th, 2014
Congress has passed the first lead free lawknown as the Reduction of Lead in Drinking
Water Act, reducing lead from 8% to 0.25%the amount of the lead allowed in "lead free" *plumbing fixtures inpotable water applications. This is similar to the laws in the state ofCalifornia and Vermont. Flomatic has been committed to providingproducts that meet low lead content for over 20 years.
We are lead freeMost products in this catalog have been tested and certified by IAPMO, an ANSI
accredited third party to comply with the laws and NSF 372. Flomatic puts LF on casting or an IAMPO sticker.
* The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight
Flomatic Valves is a diversified manufacturer of valves specializing in Automatic Control Valves, Butterfly Valves, Air/Vacuum Valves,Check and Foot Valves. Available in a wide range of sizes (1/2 thru 36) and materials, specifically designed for the Municipal,
Industrial, Water Well and Irrigation Markets.
Our valves are specified and installed in some of the largest water and wastewaterprojects in the country like The Big Dig in Boston, water and wastewater system inNew York City, pumping system in Los Angels to fuel systems associated with the SpaceShuttle in Texas, and irrigation systems in the heart land of the nations farm land. Inaddition Flomatic Automatic Control Valves are installed in some of the largest reclaimwater systems in the City of Orlando,Florida.
We are one of the only water and wastewater valve manufacturer in the United States thathave earned both a ISO 9001 and ISO 14001 registration as we are both passionate aboutquality in all phase of our business conduct and in the environment in which we operate.
As always, Flomatic is a dedicated valve manufacturer providing customers with high qual-ity valves built to last.
High Quality Valves Since 1933
-
8/11/2019 2014 Price List.pdf
3/40www.flomatic.com II
Model 80E-VFD Unleaded Bronze VFD Check 1 thru 4
These new, special patent pending submersible pump check valve for use with variable-frequency drive (VFD) control submersible pumps. This unique valve is designed to minimizeflow losses and hydraulic shocks in the pumping system. An exclusive stainless steel guidedpoppet system ensures that the valve automatically adjusts noiselessly from high to verylow flow rates. The valve seat allow a self-cleaning one point swiping action by theradius-edged custom molded rubber disc.
LOOK AT WHAT S NEW!LOOK AT WHAT S NEW!
Model 888S6/888S6R in stock now
The new all 316 Stainless Steel Wafer Style Check Valve is available in 2 8with metal to metal seating (888S6) or with a Buna-N option (888S6R) for adrip tight sealing. The Model 888 valve is designed for simple flange supportedinstallation and will operate equally well in any position and is dual rated forANSI 125# or 250# mounting. The double guided spring loaded poppet systemmaximizes efficiency and minimizes water hammer with an easy fieldexchangeable internal system.
See Page: 10
Model 82DI-VFD Male x MaleThese new valves feature the patent pending special VFD poppet design that worksunder low flow when the VFD ramps the pump up and down. They feature a male xmale NPT threads standard with optional short 8 round threaded inlet and outlet con-
nection for easy transition from the pump discharge end to the pipe. Available in2 12, 4 and 5.
See Page: 6 & Page 9 for Stainless Steel
High Quality Valves Built to Last...
Model 402S6/402S6R in stock nowThis Globe Style Silent Check valve has an all 316 Stainless Steel body with 150 #flange connections, with metal to metal seating and a stainless steel spring. Thisvalve is also available with an optional rubber seal.
See Page: 10
Coming soon...
-
8/11/2019 2014 Price List.pdf
4/40
THREADED UNLEADED CHECK VALVESTHREADED UNLEADED CHECK VALVESConsult factory for detailed limitations on all products and applications.
SIZEFemale x Female
MODEL
100E
Hexed Shape F x F
MODEL
80E
Threaded F x F
4030E
4201E*
4202E
MODEL
80A E
1/8'' Tap on Inlet
4040E
4041E
4042E
4043E
4044E
4045E
4046E
4047E
MODEL
80CE
4 Taps -1/8''on Inlet,2 - 1/4'' Outlet, 1/8''Outlet
4061E
4062E
4063E
4064E
4065E
4066E
4067E
MODEL
80BE
1/8'' Tap on Inlet,1/4'' on Outlet
4050E
4051E
4052E
4053E
4054E
4055E
4056E
4057E
MODEL
80XBE
2 -1/4'' Taps onOutlet
7961E
7963E
7964E
7965E
MODEL
80HTEHigh Temperature
Poppet
5118HTE
5159HTE4029HTE
4030HTE
4031HTE
4032HTE
4033HTE
4034HTE
4035HTE
4036HTE
4037HTE
MODEL
80DI
MODEL
80DIVFD
4031DI
4032DI
403DI
7937
7936
7938
7939
4089
4090
MODEL
80DIX
7938DIX
7939DIX
4089DIX
4090DIX
4091DIX
4091T
4092DIX
4092T
7937VFD
7936VFD
7938VFD
7939VFD
4089VFD
4090VFD
MODEL
80S6
4031S6
4032S6
4033S6
4034S6
7938S6
7939S6
4089S6
4090XSS
4091XSS
1/4"
3/8"1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
6"
8"
10"
10" Turbo
12"
12" Turbo
5118E
5159E4029E
4030E
4031E
4032E
4033E
4034E
4035E
4036E
4037E
Stainles s S teel D u c t i l e I r o nE n v i r o C h e c k
www.flomatic.comHigh Quality Valves Built to Last... III
8
00.833.2040
Valve Selection GuideValve Selection Guide
APPLICATIONSAPPLICATIONS
CORROSIVE
POTABLE
WATER
WASTE
WATER
IRRIGATION
ABRASIVE
FIBROUS
STRINGY
HIGH
PRESSURE
HIGHTEMP
HIGH
VELOCITY
VISCOUS
SLURRY
SUITABLE RECOMMENDED
Valve Type Page #Valve Model
Backflow Preventers
Gate Valves
Quarter Turn Ball Valves
Enviro Check Valves
Enviro Check Valves
Ductile Iron Check Valves
Stainless Steel Check Valves
Stainless Steel Check Valves
Stainless Steel Check Valves
Globe Style Silent Check Valves
Silent Wafer Check Valve
Swing Check Valves
Swing Check Valves
Ball Check Valves
Plastic Check Valves
Plastic Check Valves
Butterfly Valves
Foot Valves
Foot Valves
Foot Valves
Foot Valves
Strainers
Strainers
Control Valves
Control Valves
Control Valves
Control Valves
Control Vavles
Pump Control Regulator
Air & Vacuum Valves
DCVE, PVB, RPZE & RPZE II
NRS & OSY
605E & 601E
80E & 100E Series
80HTE Series
80DI, 82 & 100DI Series
80S6
100MSS & 80/100SS
812XTF/XFF, 816 & 816FL
402BT
888
745, 78A & 78
90/92 Series
50/508, 408,208,208B & 208T
100MP
297D/290P & 901
Sylax
Ductile Iron & Stainless Steel Disc
63, 60SE, 333E & 333DPE
104P/PS, 124P, 190DP & 193D
302BT
80S6F
16/16FL
46P/S, 6P, 6SE & 46T
C100
C200, C700 & C1000 Series
C300 & C400 Series
C500 Series
C600, C800 & C900 Series
Cycle Gard
I, II, IV & Hy-Flow
Air Release & Sewage Air Release Valves
2, 3
5
4
7,8
8
9,10,11
12
12
13
14
14
15, 16
15
17
18
18
20, 21
22, 23
22
23
23
24
24
26
26, 27
26
27
27
30, 31
32 ,33
Valve Applications Type of Fluid
33
2
3
5,6,78
8
9
10
10
11,12
11
13
14
14
16,17
18,19
1819
19
20
20
22
22,23
22
23
23
28,29
30,31
-
8/11/2019 2014 Price List.pdf
5/40
VALVES BY TYPE
Air Release/ Vacuum PageMiniair, Maxiair, Wellair 30Comboair, Sewair Series 30,31Backflush 31Auto-Drain - Model 70 3
Auto-Vac
- Model 77 13
Automatic Control Valve PageAltitude
C201, CF201,C205, CF205 22
Back Pressure C301, CF301 22
Cycle Gard CB152E,C3100, CI, CN Series, C152E 28,29Float Valve
C701, CF701 23
Flow ControlC901, CF901 24
Hydraulic CheckC1001, CF1001 24
Pressure ReducingC101, CF101, C150E 22,27
Pressure ReliefC401, CF401 23
Pump ControlC601, CF601 23
Solenoid ActuatedC801-2, CF801-2 24
Surge ArrestorC501, CF501 23
Backflow Preventers PageHose Connection Vacuum Breaker
GFHB8 32Dual Check Valve, GF8080E,
GF8080SS 32Dual Check Valve w/ Atmos. Vent
GF8200 32
Unleaded Ball Valves Page(Quarter Turn)
SS Ball Valves 24
Butterfly Valves PageAzure AWWA C504 15Kwik-Close
15
Sylax Wafer & Lug Style 16Sylax Electric Actuated 17
Break Off Plugs 5
Check Valves PageBall Check508, 408,4082,208,208T,208B 13
Globe Style Silent Check402BT, 402BTR, 402S6, 402BTR 10Hydraulic Check
C1001, CF1001 24
Drain Back 3Submersible Check
80E Series, 100E, 100XLE, 2,380DI, 80DIVFD, 80DI8R,80DI8R-VFD, 82DI8R-VFD,82DP, 80M2DI-VFD, 5,682S6-VFD, 80MS6-VFD,80S6VFD 9
Swing Check78A, 78, 90/92, 93 Series 11745, 745BF, 745PI, 745BFPI 12
Wafer & SS Check895, 848, 888, 888S6, 812X 9,10816, 816F, 816HS Series 7
Foot Valves Page60SE, 333 Series, 190 Series,124P, 104 Series, 18357, 63, 812 Series, 19302BT Series, 19Series 16, 16FL 20
Gate Valves PageNRS AWWA C515, C509 33OS&Y AWWA C509 33
Strainers Page6P, 46 Series, 6SE 20Y Strainers 20
Sales Agents by State 34VALVES BY MATERIAL
Unleaded Bronze PageY-Strainers 20
Cast Iron Page
Air Release/Vacuum 30-31Ball Check 13Foot Valve 18,19Globe Style Silent Check 10Strainer 20Swing Check 11,12Wafer Check 9,10
Ductile Iron PageCheck Valves 5-7Control Valve 21-25
Galvanized PageStrainers 20,30
Plastic PageBall Check 13In-line Check 14Insert Check 14Foot Valves 18Strainers 20Submersible Check 13
Stainless Steel PageFoot Valve 18-19Strainers 18Submersible Check 8,9Wafer Check 9
Unleaded Bronze PageFoot Valves 18In-line Check 2,3Strainers 20Submersible Check 2,3
TABLE OF CONTENTSTABLE OF CONTENTS
1www.flomatic.com High Quality Valves Built to Last.
-
8/11/2019 2014 Price List.pdf
6/40
80XBE-ENVIRO CHECK
body is cast from an unleadedalloy with two 1/4" tapped holes on the outlet side for pressureswitch and gauge. This valve features a non-spin acetal poppetwith a NITRILE (Buna-N) seal and stainless steel spring. Fordiaphragm tanks.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7961E 1.2 50 $ 63.5911/4" 7963E 1.6 36 $ 82.33
11/2" 7964E 2.8 25 $ 104.91
2" 7965E 3.2 16 $ 187.28
80CE-ENVIRO CHECK body is cast from an unleaded alloy.Control Center for Submersible Pump installations with fourtappings; one 1/8" inlet side, two 1/4" outlet sides, one 1/8"outletside with a brass plug. This valve features a non-spin acetalpoppet with a NITRILE (Buna-N) seal and stainless steel spring.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4061E 1.2 50 $ 63.5911/4" 4062E 1.8 36 $ 82.33
11/2" 4063E 2.7 25 $ 104.81
2" 4064E 3.1 16 $ 187.2821/2"* 4065E 2.7 25 $ 772.50
* Unleaded bronze poppet.
80BE-ENVIRO CHECK
body is cast from an unleaded alloywith two drilled and tapped holes; 1/8" inlet side and 1/4" outletside. This valve features a non-spin acetal (3/4"- 2") or unleadedbronze ( 21/2"- 4") poppet with a NITRILE (Buna-N) seal andstainless steel spring.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
3/4" 4050E .6 100 $ 52.841" 4051E 1 50 $ 63.45
11/4" 4052E 1.5 36 $ 78.06
11/2" 4053E 2.3 25 $ 101.112" 4054E 2.9 16 $ 156.72
21/2"* 4055E* 6.3 $ 765.683"* 4056E* 13 $ 1,081.064"* 4057E* 25 $ 1,413.12
80BE with 1/4" Tapped Holes on Both Ends
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7971E 1 50 $ 63.4511/4" 7972E 1.5 36 $ 78.06
11/2" 7973E 2.3 25 $ 101.112" 7974E 2.9 16 $ 156.72
* Unleaded bronze poppet.
80AE-ENVIRO CHECK body is cast from an unleaded alloy.This valve features a non-spin acetal (1/2"- 2") or unleaded bronze
(2 1/2"- 4") poppet with a NITRILE (Buna-N) seal and stainlesssteel spring and a 1/8" drilled and tapped hole on the inlet side.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
3/4" 4040E .7 100 $ 50.171" 4041E 1.2 50 $ 59.00
11/4" 4042E 1.5 36 $ 78.84
11/2" 4043E 2.4 25 $ 97.512" 4044E 3 16 $ 154.38
21/2"* 4045E* 6.4 $ 721.183"* 4046E* 13 $ 1,051.654"* 4047E* 25 $ 1,390.99
80AE with a 1/4" Tapped Hole on the Inlet Side
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7981E 1.2 50 $ 59.0011/4 7983E 1.5 36 $ 78.84
80XAE with a 1/4" Tapped Hole on the Outlet Side
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7982E 1.2 50 $ 59.0011/4 7984E 1.6 36 $ 78.84
* Unleaded bronze poppet.
2
80ME-ENVIRO CHECK body is cast from an unleaded alloy.This valve features a non-spin poppet, with a NITRILE (Buna-N)
seal and stainless steel spring.Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4071E .7 50 $ 48.152"M x 2"F 4079E 2.5 16 $ 152.52
* Unleaded bronze poppet.
NOTE: Reduced Ported design, see 80MDI-VFD for full ported onpage 6.
80AE Discount Code A80E Discount Code A
Patent # 6,581,633 and other patents pending
80E-ENVIRO CHECK body is cast from an unleaded alloywith threaded female x female connection. This valve features a
non-spin acetal (1/2"- 2") or unleaded bronze (21/2"- 4")poppet with a NITRILE (Buna-N) seal and a stainless steel spring.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1/4"* 5118E* .2 10 $ 58.823/8"* 5159E* .2 10 $ 59.131/2" 4029E .2 100 $ 43.033/4" 4030E .7 100 $ 43.571" 4031E 1.3 50 $ 46.77
11/4" 4032E 1.6 36 $ 65.85
11/2" 4033E 2.5 25 $ 90.552" 4034E 3.1 16 $ 144.27
21/2"** 4035E** 6.5 $ 615.683"** 4036E** 13 $ 741.944"** 4037E** 24 $ 1,289.92
* Pressure Max 200 PSI** Unleaded bronze poppet, 21/2" and larger are designed for
vertical applications. See 80DIX or 80DI-VFD for horizontal.1/4"-2 can be installed horizontal or vertical.
ALL VALVES HAVE LESS THAN 1 PSI CRACKING PRESSURE
FOR HIGHER CRACKING PRESSURE SEE PAGE 7
80CE Discount Code A 80XBE Discount Code A80BE Discount Code A
www.flomatic.com
80ME Discount Code A
ENVIROC
HECK
VALVES800.833.2
040
-
8/11/2019 2014 Price List.pdf
7/40
100E-ENVIRO CHECK body is cast from an unleaded alloy.Hex shaped for easy wrenching, this valve features a non-spinacetal poppet with a NITRILE (Buna-N) seal and stainless steelspring.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
3/4"* 4030E* .7 100 $ 43.571" 4201E 1.1 50 $ 44.40
1"** 4201LE** 1.2 50 $ 47.8211/4" 4202E 1.4 36 $ 60.85
* Same body as 80E** Longer threads
100E Discount Code A 100ME Discount Code A
100ME-ENVIRO CHECK body is cast from an unleadedalloy. Hex shaped body for easy wrenching, this valve features anon-spin acetal poppet with a NITRILE (Buna-N) seal and stainlesssteel spring.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4071E .7 50 $ 48.1511/4"M x 1"F* 4221LE* 1.4 50 $ 46.39
11/4"M x 11/4"F 4242E 1.5 50 $ 58.64
11/2"M x 11/4"F 4223E 1.5 36 $ 77.99
* Longer threads
3
80HTE-ENVIRO CHECK body with threaded female xfemale connections. Features a high temperature stainless steelpoppet and a VITON seal with a stainless steel spring. Ideal for hotwater applications.
Temp Max: 400F (150C) Pressure Max: 100 PSI
SIZE PART NO. WGT. LIST PRICE1/4" 5118HTE .2 $ 75.423/8" 5159HTE .2 $ 75.821/2" 4029HTE .2 $ 57.363/4" 4030HTE .8 $ 80.061" 4031HTE 1.4 $ 77.75
11/4" 4032HTE 1.7 $ 106.97
11/2" 4033HTE 2.7 $ 148.822" 4034HTE 4.0 $ 211.06
21/2" 4035HTE 6.5 $ 708.643" 4036HTE 13.0 $ 839.034" 4037HTE 25.0 $ 1,526.00
80HTEDiscount Code
A
70- Auto-Drain-This 1 valve is available in stainless steel,and PVC. All internal parts are engineered composite, with astainless steel disc and resilient seat.
Temp Max: 180F (80C) Pressure Max: 400 PSI
5 PSI open pressure standardMATERIAL PART NO. CASE QTY. LIST PRICE
PVC 4501PX 12 $ 58.22Stainless Steel 4501SSX 12 $ 71.96
10 PSI open pressure optionalMATERIAL PART NO. CASE QTY. LIST PRICE
PVC 4501P 12 $ 58.22Stainless Steel 4501SS 12 $ 71.96
70Discount Code
A
100XLE-ENVIRO CHECK body is cast from an unleadedalloy. Hex shaped body for easy wrenching, this valve features anon-spin acetal poppet with a NITRILE (Buna-N) seal and stainlesssteel spring. Features extra long threads for bell end PVC droppipe.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4201XLE 1 36 $ 54.7911/4"M x 11/4"F 4242XLE 1.5 36 $ 70.54
80MDI-VFD DUCTILE IRON2"M x 2"F 4084VFD 4.5 36 $ 216.84
See page 8 for stainless steel version
100XLE Discount Code A
100DPE-ENVIRO CHECK body. Dual purpose check valve,stainless steel spring and non-spin acetal poppet. 11/4" male and1" female threads on both ends with a NITRILE (Buna-N) seal.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
11/4"M & 1"F 4231E 1.1 50 $ 55.53
100DPE Discount Code A
High Quality Valves Built to Last... www.flomatic.com
Note: 10 PSI spring require minimum 5 gpm to close. Forlower flows use 5 PSI.
NEW!
Valves shown with specialbell end PVC pipe
Flomatics New Extended 1 Model 100E Submersible Pump CheckValve is now longer than any other leading brand in the industry. For yourconvenience we left the Part Number 4201E and the Price the same.
We also offer the same up-grade for our stainless steel 1 Model 100SS2Part Number 4201SS2.
More valve at no extra cost!
-
8/11/2019 2014 Price List.pdf
8/40
ENVIROC
HECK
VALVES800.833.2
040
4High Quality Valves Built to Last... www.flomatic.com
Flomatic SubmersiblePump Check Valve(Patent Pending)
MODEL 80-VFD SERIESWith Stainless Steel GuidingDelivers Longer Service Life Variable Flow Rates (VFD Controlled Pumps)
Well Water Pump Systems
Municipal/Public Water Systems
Irrigation and Sprinkler Systems
Features & Benefits Lower Friction Loss Noiseless Operation
Stainless Steel Guiding (Replaceable)
Strong Ductile Iron Valve Body (SS see page 9)
Un-Leaded Construction
Corrosion Resistant Internal Components
Pipe Lead-In section
Longer thread area (8 round optional)
Optional Break-Off Plug
Lead FreeThe Series 80-VFD Check Valves conform to the new federal lead free legislation "California
Lead Plumbing Law" or "Complies with California Lead Plumbing Law and Vermont State
certified to IAPMO R&T certification mark.
Materials Valve body: Ductile Iron (316SS see page 9)
Valve Guide: 316 Stainless Steel
Follower: Ductile Iron (316SS see page 9) Disc: Buna-N Nitrile (FDA approved)
Spring: 316 Stainless Steel
Check ValveModel 80DI-VFD
New Model80S6-VFD316SS
Model80MDI-VFD
New additional sizes and mode
flomatic vfd
-
8/11/2019 2014 Price List.pdf
9/405
80DI- High strength epoxy coated ductile iron body, disc andfollower with threaded female x female connection. Features aNITRILE (Buna-N) seal, stainless steel spring fasteners, and ductileiron poppet. 21/2" and larger are designed for vertical applica-tions. See 80DIX or 80DI-VFD for horizontal.
Note: 1" through 11/2" features acetal poppet.
Temp Max: 180F (80C) Pressure Max: 400 PSI 111/2"
600 PSI 2-8
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4031DI 2 50 $ 31.0811/4" 4032DI 1 36 $ 43.27
11/2" 4033DI 2 25 $ 59.182"* 7937 4 16 $ 115.0021/2" 7936 9 1 $ 264.923" 7938 12 5 $ 387.074" 7939 26 4 $ 596.02
5" 4088 46 $ 1,106.526" 4089 61 $ 1,374.938" 4090 93 $ 2,324.43
*Longer body with stainless steel seat, use break off plug76098-2.
To order break-off plug, add PLG to part number and add$100.00 to list price, $75.00 added for composite plug installedand add PPLG to end of part number.
80DI Discount Code A
80DIX- High strength epoxy coated ductile iron body features adouble-guided ductile iron poppet. Designed for vertical and hori-zontal applications.Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE
3" 7938DIX 13 $ 312.434"* 7939DIX* 17 $ 487.676"* 4089DIX* 51 $ 969.998"* 4090DIX* 89 $ 2,247.3810" 4091DIX 150 $ 3,561.7412" NEW 4092DIX 350 $ 7,519.59
To order with break-off plug, replace DIX with XPL in partnumber and add $100.00 to list price of valve, $75.00 addedfor composite plug installed and add PPLG to end of partnumber.
* See 80DI for high capacity flow.
100MDI- High strength epoxy coated ductile iron valve featuresmale threaded inlet and female threaded outlet. Ideal forsubmersible pumps.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE 11/4"M x 1"F 4221LDI 1 $ 25.07
11/4"M x 11/4"F 4242LDI* 1.4 $ 36.322"M x 2"F 4084VFD 4.5 $ 176.29
*Longer threads.
100MDI Discount Code A
BREAK-OFF PLUG- Stainless steel construction. Threaded 3/8"to install into valve. When broken off, riser pipe drains.
Temp Max: 180F (80C) Pressure Max: 600 PSI
SIZE PART NO. WGT. LIST PRICE
2" 76098-2 .17 $ 64.602 1/2" 76098-3 .19 $ 66.293" 76098-6 .2 $ 66.524" 76098-7 .25 $ 66.52
5"8" 76098 .3 $ 63.9610" & 12" 76098-11 .45 $ 79.96
Consult factory for 12 plugs
BREAK-OFF PLUG Discount Code A
New Pressure Rating:Model 80DI
600 PSI 2'' 8'' sizes
80DI8R-8 Round Short Threads - High strength epoxycoated ductile iron body, disc and follower with threaded female xfemale 8 round short connection. Features a NITRILE (Buna-N)seal, stainless steel spring fasteners, and ductile iron poppet.Designed for vertical applications.
Temp Max: 180F (80C) Pressure Max: 600 PSI
Short Threads - consult factory for long threads
SIZE PART NO. WGT. LIST PRICE
3" 7938-1 15 $ 483.844" 7939-1 25 $ 745.025" 4088-1 46 $ 1,383.416" 4089-1 66 $ 1,717.608" 4090-1 93 $ 2,905.81
To order with break-off plug, add PLG to part number for 3"-8" and add $100.00 to list price of valve, $75.00 added forcomposite plug installed and add PPLG to end of part number.
80DI8R Discount Code A
80DI-VFD - High strength epoxy coated ductile iron body,poppet and stainless steel guide with threaded female x femaleNPT connection. Features a NITRILE (Buna-N) with seal, stainlesssteel shaft, and a ductile iron poppet. Designed for vertical or hor-izontal applications.
Temp Max: 180F (80C) Pressure Max: 600 PSI
SIZE PART NO. WGT. LIST PRICE
2" 7937VFD 3.2 $ 141.5121/2"* 7936VFD 9.5 $ 324.96
3" 7938VFD 16 $ 475.384" 7939VFD 47 $ 732.005"* 4088VFD 49 $ 1,358.986" 4089VFD 70 $ 1,688.628" 4090VFD 98.5 $ 2,854.76
To order break-off plug, add PLG to part number and add$100.00 to list price, $75.00 added for composite plug installedand add PPLG to end of part number.
*June 2014 see 80M2DI-VFD for 21/2" male threads on
page 6.
80DI-VFD Discount Code A
COMPOSITE BREAK-OFF PLUG-Threaded 3/8" to installinto valve. When broken off, riser pipe drains.
Temp Max: 180F (80C) Pressure Max: 600 PSI
SIZE PART NO. WGT. LIST PRICE
3"8" 76098P .1 $ 25.00
Plug is pre-marked to be easily sized in the field.
COMPOSITEBREAK-OFF PLUG Discount Code A
80DIX Discount Code A
NEW!
80DI8R-VFD - 8 Round Short Threads High strengthepoxy coated ductile iron body, poppet and stainless steel guidewith 8 round short thread connection. Features a NITRILE (Buna-N) seal, with stainless steel shaft and a ductile iron poppet.Designed for vertical or horizontal applications.
Temp Max: 180F (80C) Pressure Max: 600 PSI
Short Threads - consult factory for long threads
SIZE PART NO. WGT. LIST PRICE
3" 7938-1VFD 16 $ 594.234" 7939-1VFD 47 $ 915.006" 4089-1VFD 70 $ 1,698.728" 4090-1VFD 98.5 $ 2,110.78
To order break-off plug, add PLG to part number and add$100.00 to list price, $75.00 added for composite plug installed
and add PPLG to end of part number.
80DI8R-VFD Discount Code A
NEW!
-
8/11/2019 2014 Price List.pdf
10/406
80DICL- Ductile iron check valve incorporates Certainteeds
patented groove lock type pipe connections called Certa-Lok.Fusion epoxy coated inside and out including poppet assembly,this valve is corrosion resistant and unleaded. High strength ductileiron body with stainless steel spring and NITRILE (Buna-N) seal.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE
2" 7937CLVFD 4 $ 270.253" 7938CLVFD 5 $ 374.204" 7939CLVFD 15 $ 510.115" 4088CL 14 $ 711.646" 4089CLVFD 35 $ 1,711.32
80MDICL- Ductile iron check valve uses Certainteeds patentedgroove lock type pipe connection on outlet end, and male pipethread for the inlet connection. Materials are the same as the80DICL.
SIZE PART NO. WGT. LIST PRICE 2" 7937MCLVFD 4 $ 275.473" 7938MCLVFD 5 $ 368.974" 7939MCLVFD 15 $ 538.465" 4088MCL 14 $ 716.116" 4089MCLVFD 35 $ 1,735.34
Certa-Lok is a registered trademark with CertainteedCorporation.
Note: RESTRICTED FLOW - REDUCED PORTED
Also available in all 316SS, Model 80S6CL. See Page 8.
80DI Turbo- Patented high efficiency ductile iron check valve.Threaded female x female connection. High strength ductile ironbody and poppet, stainless steel spring and screws, stainless steelshaft and with a NITRILE (Buna-N) Seal Disc. (No O-Ring Seals)
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE
6" 4089T 46 $ 2,831.0010" 4091T 155 $ 5,984.16
80DI Turbo Discount Code A 80DICL Discount Code A
82DP- Dual purpose compact ductile iron reduced ported checkvalve with male and female threads on both ends. High strengthductile iron body and poppet, with stainless st eel spring andfasteners. Designed to fit into tight fitting wells.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE
21/2" F & 3" M* 4094DP 7 $ 309.413" F & 4" M 4095DP 10 $ 411.554" F & 5" M 4096DP 25 $ 776.355" F & 6" M 4097DP 51 $ 1,560.40
Same valve as 82, extra female (internal) threads.
Note: RESTRICTED FLOW - REDUCED PORTED
* Unleaded Bronze Poppet
82DP (replaces 82) Discount Code A
100% Fusion Bonded Epoxycoated with our quality coating
operation.
High Quality Valves Built to Last... www.flomatic.com
DUCTILEIR
ONCHECKV
ALVES800.8
33.2040
80MDI- High strength epoxy coated ductile iron valve featuresmale threaded inlet and female threaded outlet. Ideal forsubmersible pumps.Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE
3"M x 3"F 4083 14 $ 346.834"M x 4"F 4077 22 $ 467.385"M x 5"F 4075 23 $ 815.986"M x 5"F 4087 48 $ 931.816"M x 6"F 4081VFD 50 $ 1,186.38
To order with break-off plug, add PLG to partnumber for 4"-6" and add $100.00 to list price of valve,$75.00 added for composite plug installed and add PPLG toend of part number.
Note: RESTRICTED FLOW - REDUCED PORTED
80MDI Discount Code A
80MDI-VFD- High strength epoxy coated ductile iron body,poppet and stainless steel guide with threaded male x female NPTconnection. Features a NITRILE (Buna-N) seal, stainless s teel shaft,and ductile iron poppet. Designed for vertical or horizontal appli-cations. Full ported valve.
Temp Max: 180F (80C) Pressure Max: 600 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
2"M x 2"F 4084VFD 4 6 $ 216.843"M x 3"F 4083VFD 14 5 $ 416.204"M x 4"F 4077VFD 22 4 $ 580.865"M x 5"F 4075VFD 23 $ 979.186"M x 5"F 4087VFD 48 $ 1,118.176"M x 6"F 4081VFD 50 $ 1,186.38
To order with break-off plug, add PLG to partnumber for 4"-6" and add $100.00 to list price of valve.
$75.00 added for composite plug installed and add pplg to endof part number.
80MDI-VFD Discount Code A
80DI-CLVFD
Shown above with Certa-Lok pipe, not included.
82DI-VFD Discount Code A
82DI-VFD - High strength epoxy coated ductile iron body,poppet and stainless steel guide with threaded male x male con-nection. Features a NITRILE (Buna-N) seal, stainless steel shaft,and ductile iron poppet. Designed for vertical or horizontal appli-cations. Full ported valve.
Temp Max: 180F (80C) Pressure Max: 600 PSI
SIZE PART NO. WGT. LIST PRICE
21/2"M x 21/2"M 4093VFD 9.5 $ 148.584"M x 4"M 4095VFD 47 $ 499.155"M x 5"M 4096VFD 49 $ 768.60
Consult factory for 8 round threads.
To order with break-off plug, add PLG to partnumber for 4"-6" and add $100.00 to list price of valve,$75.00 added for composite plug installed and add PPLG toend of part number.
-
8/11/2019 2014 Price List.pdf
11/40
80DIB- Standard high strength epoxy coated ductile iron body
with1
/8" tapped hole on inlet side and1
/4" tapped hole on theoutlet side.
Note: 1" through 11/2"features acetal poppet.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY LIST PRICE
1" 4051DI .2 50 $ 42.7011/4" 4052DI .7 36 $ 51.21
11/2" 4053DI 1.3 25 $ 68.752" 4054DI 5 16 $ 117.00
21/2"* 4055DI 7 1 $ 338.703"* 4056DIX 10 5 $ 437.004"* 4057DIX 19 4 $ 580.00
Sizes available to 10"- CONSULT FACTORY.* 80DIX double guided poppet. Can be installed vertical
or horizontal.
7
80DIA- Standard high strength epoxy coated ductile iron body
with1
/8" tapped hole on the inlet side.Note: 1" through 11/2"features acetal poppet.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4041DI .2 50 $ 42.7011/4" 4042DI .7 36 $ 51.21
11/2" 4043DI 1.3 25 $ 68.752" 4044DI 5 16 $ 117.00
21/2"* 4045DI 7 1 $ 338.703"* 4046DIX 10 5 $ 437.004"* 4047DIX 19 4 $ 580.00
Sizes available to 10"- CONSULT FACTORY.* 80DIX double guided poppet. Can be installed vertical
or horizontal.
80DIA Discount Code A 80DIB Discount Code A
visit our website
www.flomatic.comfor Flomatic product spec sheets.
www.flomatic.com High Quality Valves Built to Last.
TECHNICALTECHNICALSPEC SHEETS...SPEC SHEETS...
are available for all productsin this catalog.
www.flomatic.com
816- All 316 stainless steel threaded FNPT Y-Type check valve.Patented Spring loaded, Teflon soft-seated plunger, optionalencapsulated spring, with all 316SS internals.
Temp Max: 450F (230C) Pressure Max: 600 PSIX=1 FOR STAINLESS X=2 FOR CARBON
STAINLESS CARBON SIZE PART NO. LIST PRICE LIST PRICE 1/4" YV2501-X-0100 $ 200.21 $ 175.603/8" YV3751-X-0100 $ 200.21 $ 175.601/2" YV5001-X-0100 $ 208.87 $ 175.603/4" YV7501-X-0100 $ 265.58 $ 222.021" YV0011-X-0100 $ 297.70 $ 255.0411/4" YV1251-X-0100 $ 435.07 $ 380.47
11/2" YV0151-X-0100 $ 488.37 $ 392.212" YV0021-X-0100 $ 732.02 $ 605.01
Consult factory for pricing and other end connections andbody material options.
816HS Discount Code B
816HS- Same body as Model 816 witih heavy spring for highercracking pressure.
SIZE PART NO. CRACKING PRESSURE LIST PRICE
1 YV001110107-08 8 PSI $327.471 YV001110107-10 10 PSI $327.471 YV001110107-15 15 PSI $327.471 YV001110107-20 20 PSI $327.471 YV001110107-30 30 PSI $327.47
Consult factory for pricing and other sizes and body materials.
*Note: the last 2 digits are the weight of the spring.
816FL- All 316 stainless steel flanged Y-Type check valve.Patented Spring loaded, Teflon soft-seated plunger, optionalencapsulated spring, with all 316SS internals.
Temp Max: 450F (230C) Pressure Max: 600 PSIX=1 FOR STAINLESS X=2 FOR CARBON
STAINLESS CARBON SIZE PART NO. LIST PRICE LIST PRICE
1" YV0014-X-0100 $ 629.12 $ 538.8111/4" YV1254-X-0100 $ 790.99 $ 637.81
11/2" YV0154-X-0100 $ 936.31 $ 734.912" YV0024-X-0100 $ 1,114.75
Consult factory for pricing and other sizes and body materials.
816FL Discount Code B816 Discount Code B
-
8/11/2019 2014 Price List.pdf
12/40
80SSB-body is all 303 stainless steel one piece body with twodrilled and tapped holes; 1/8" inlet side and 1/4" outlet side.
80SSA Discount CodeA
100MSS- All 303 stainless steel body. Features a high strengthacetal poppet, stainless steel spring with a NITRILE (Buna-N) seal.Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. CASE QTY. LIST PRICE 1/2"M x 1/2"F* 4219SS* 100 $ 83.573/4"M x 3/4"F* 4218SS* 100 $ 90.411"M x 1"F* 4220SS* 81 $ 103.8911/4"M x 1"F** 4221LSS2(CAST)** 50 $ 50.98
11/4"M x 11/4"F 4242SS2 (CAST) 50 $ 63.43
11/4"M x11/4"F**4242LSS2 (CAST)** 50 $ 65.31
80SS/100SS - All 303 stainless steel one piece body. Stainless steelspring with a NITRILE (Buna-N) seal. Threaded female x female connection.
Temp Max: 180F (80C) Pressure Max: 400 PSISIZE PART NO. CASE QTY. LIST PRICE
1"* 4201SS2* 50 $ 47.621" 4031SS2 50 $ 49.491"* long 4201LSS2* 50 $ 56.0811/4"* 4202SS2* 36 $ 67.09
11/4" 4032SS2 36 $ 69.16
11/2" 4033SS2 25 $ 96.942" 4034SS2 16 $ 156.31
100XLSS Discount CodeA
80SSC Discount CodeA
100MSS Discount Code A
100XLSS - All 303 stainless steel. Hex shaped for easy wrench-ing, this valve features a non- spin acetal poppet, with a NITRILE(Buna-N) seal and stainless steel spring. Features extra longthreads for special bell end PVC pipe.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4201XLSS2 1 36 $ 60.7111/4"M x 11/4"F 4242XLSS2 1.5 36 $ 78.17
80MS6-VFD (316 STAINLESS STEEL)
2"M x 2"F* 4084S6VFD 4 36 $380.07
80SS WITH A TAPS - All 303 stainless steel one piece body.This valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainless steel spring with a 1/8" drilled and tapped holeon the inlet side.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4041SS2 1.2 50 $ 70.7211/4" 4042SS2 1.5 36 $ 98.03
11/2" 4043SS2 2.4 25 $ 120.812" 4044SS2 3 16 $ 191.28
80SSAwith a 1/4 "Tapped Hole on the Inlet Side
SIZE PART NO. WGT. CASE QTY. LIST PRICE1" 7981SS2 1.2 50 $ 70.72
11/4 7983SS2 1.5 36 $ 98.03
80SSXAwith a 1/4"Tapped Hole on the Outlet SideSIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7982SS2 1.2 50 $ 70.7211/4 7984SS2 1.6 36 $ 98.03
80SSXB Discount CodeA
80SSXB body is alll 303 stainless steel one piece body with two1/4" tapped holes on outlet side for pressure switch and gauge.This valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainless s teel spring. Use with diaphragm tanks.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7961SS2 1.2 50 $ 83.8511/4" 7963SS2 1.6 36 $104.60
80SSC-All 303 stainless steel body construction. Control Centerfor Submersible Pump installations with four tappings; one 1/8"inlet side, two 1/4" outlet sides, one 1/8" outlet side with plug.
Temp Max: 180F (80C) Pressure Max: 400 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4061SS2 1.2 50 $ 83.8511/4" 4062SS2 1.8 36 $104.60
80SSB Discount CodeA
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4051SS2 1 50 $ 78.61
11/
4" 4052SS2 1.5 36 $ 96.72
11/2" 4053SS2 2.3 25 $126.372" 4054SS2 2.9 16 $194.18
80SSB with 1/4" Tapped Holes on Both Ends
SIZE PART NO. WGT. CASE QTY. LIST PRICE1" 7971SS2 1 50 $ 78.6111/4" 7972SS2 1.5 36 $ 96.72
11/2" 7973SS2 2.3 25 $126.372" 7974SS2 2.9 16 $194.18
Temp Max: 180F (80C) Pressure Max: 400 PSI
* Made from bar stock, with a viton seal** Long BodyVITON seats optional, add 10% to list price.
*Same body style as 100 series.See page 26 for 3/8 and 1/2 316SS check valve
STAINLESS
STEELCHECK
VALVES800.833.2040
80SS/100SS Discount Code A
8
80S6CL- Stainless steel check valve incorporates Certainteedspatented groove lock type pipe connections called Certa-Lok.Stainless steel inside and out including poppet assembly. Highstrength stainless steel body and spring with a NITRILE (Buna-N)seal.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE
2" 7937S6CL 4 $ 662.373" 7938S6CL 5 $ 835.044" 7939S6CL 8 $ 916.335" 4088S6CL 25 $ 1,798.386" 4089S6CL 35 $ 3,500.97
80S6MCL- Stainless steel check valve uses Certainteedspatented groove lock type pipe connection on outlet end, andmale pipe thread for the inlet connection. Materials are thesame as the 80S6CL.
Temp Max: 180F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE
2" 7937S6MCL 4 $ 689.593" 7938S6MCL 5 $ 842.354" 7939S6MCL 8 $ 925.105" 4088S6MCL 25 $ 1,854.006" 4089S6MCL 35 $ 3,560.38
Certa-Lok is a registered trademark with Certainteed Corporation.
Note: Poppet one size smaller.
80S6CL Discount Code A
80S6MCL Discount Code A
-
8/11/2019 2014 Price List.pdf
13/40
812XT- All 316 stainless steel, threaded 3 piece check valve andbody. Metal to metal seating, teflon O-ring. 1 1/2"8" availablewith NITRILE (Buna-N) or VITON seal, add 10% to list price. 2"6"available with socket weld connection, add 25% to list.
Temp Max: Metal Seating only 400F (200C)*Pressure Max: 300 PSI*
SIZE PART NO. WGT. LIST PRICE 1/2" 2420XT .9 $ 131.033/4" 2421XT 1.5 $ 152.011" 2422XT 2.1 $ 188.51
11/4" 2423XT 3.5 $ 285.90
11/2" 2424XT 5.3 $ 366.662" 2425XT 7.5 $ 509.43
21/2" 2426XT 19 $ 628.313" 2427XT 24 $ 913.264" 2428XT 38 $ 1,515.185" 2429XT 60 $ 2,721.056" 2430XT 77 $ 3,868.538" 2431XT** 136 $ 6,456.56
Note: Add V (Viton) or R (Buna-N) to part #.
*Consult factory for temp. & pressure rating . **230 PSI Max
Also available with Butt (XB) and Socket Weld (XS) ends.
812X Discount CodeB
SIZE PART NO. WGT. LIST PRICE 1/2" 2420J .2 $ 94.923/4" 2421J .3 $ 123.211" 2422J .5 $ 144.21
11/4" 2423J .7 $ 191.06
11/2" 2424J 1.4 $ 283.262" 2425J 2.3 $ 328.89
21/2" 2426J 3.7 $ 391.043" 2427J 5.4 $ 496.114" 2428J 7.8 $ 661.55
VALVE BODY FOR 812XT(with no flanges)
812XT Discount CodeB
9
80S6- All 316 stainless steel threaded check valve body.Stainless steel spring, poppet and a Viton seal, (Buna-N) optional.
Temp Max: 400F (200C) Pressure Max: 400 PSISIZE PART NO. WGT. LIST PRICE
1" 4031S6 1.1 $ 86.35
11/4" 4032S6 1.4 $ 127.63
11/2" 4033S6 2.7 $ 167.282" 4034S6 4.0 $ 248.463" 7938S6 10 $ 868.964" 7939S6 25 $ 1,316.406" 4089S6 65 $ 4,122.558" 4090XSS 90 $ 6,703.8810" 4091XSS 170 $11,850.77
80S6 Discount CodeA
To order Model 80S6 with break-off plug, add PLG to part number for3- 10 and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add PPLG to end of part #.
80S6- All 316 stainless steel threaded check valve body.Stainless steel spring, poppet and a NITRILE (Buna-N) seal, Viton
optional.Temp Max: 400F (200C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE
2" 4034S6VFD 4.0 $ 298.153"* 7938S6VFD 10 $ 1,042.754"* 7939S6VFD 25 $ 1,579.686"* 4089S6VFD 65 $ 4,947.078"* 4090XSSVFD 90 $ 8,044.65
80S6VFD Discount CodeA
82S6VFD- All 316 stainless steel threaded male x male checkvalve body. Stainless steel spring, poppet and a NITRILE (Buna-N)
seal.Temp Max: 400F (200C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE
21/2"M x 21/2"M 4093S6VFD 4.0 $ 260.884"M x 4"M* 4095S6VFD 25 $ 912.405"M x 5"M* 4096S6VFD 58 $ 1,382.22
*Consult factory for availability
82S6VFD Discount CodeA
To order Model 80S6 with break-off plug, add PLG to part number for3- 10 and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add PPLG to end of part #.
*Consult factory for availability
812X WAFER STYLE CHECK VALVE- All 316 stainlesssteel, wafer connection ANSI 150/300. Metal to metal seating on812X model.Temp Max: -20 F (-30C) to 660 F (350C)*Pressure Max: Metal Seating 600 PSI*NSF/ANSI 61-2010 Certified by IAPMO R&T, 2-8
812X - No Flange Face SealSIZE PART NO. WGT. LIST PRICE 1/2" 2420X .2 $ 94.923/4" 2421X .3 $ 123.211" 2422X .5 $ 144.21
11/4" 2423X .7 $ 191.06
11/2" 2424X 1.4 $ 283.262" 2425X 2.3 $ 328.89
21/2" 2426X 3.9 $ 391.053" 2427X 5.4 $ 496.114" 2428X 7.8 $ 661.555" 2429X 20 $ 2,426.896" 2430X 32 $ 3,062.818" 2431X** 67 $ 5,313.418" 2432X 64 $ 5,670.30
*Consult factory for temp. & pressure rating . **230 PSI Max
80MS6VFD- All 316 stainless steel threaded male x femalecheck valve body. Stainless steel spring, poppet and VITON seal.
Temp Max: 400F (200C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE
2"M x 2"F* 4084S6VFD 4.0 $ 398.524"M x 4"F* 4077S6VFD 25 $ 1,766.006"M x 6"F* 4081S6VFD 58 $ 4,989.00
*Consult factory for availability
80MS6VFD Discount CodeA
OUR WEBSITE NOW FE TURING:
LIVE
H T
3D
NIM TIONS
SHIPMENT
TR KING
UPD TED
PRODU T
PPROV L
-
8/11/2019 2014 Price List.pdf
14/40
888R/888- New patented design. Cast iron body with epoxycoating. Wafer connection ANSI 125/250, 2-6. Metal to metalseating, for drip-tight sealing use 888R.
For stainless steel trim add ST to end of part numberand 25% to list. See picture on right.
Temp Max: 180F (80C)Pressure Max: 200 PSI ANSI 125, 400 PSI: ANSI 250
888R-Rubber seal drip-tight
SIZE PART NO. WGT. LIST PRICE
2" 2434R 5 $ 208.0021/2" 2432R 7 $ 233.003" 2435R 11 $ 239.004" 2436R 18 $ 297.005" 2433R 25 $ 515.906" 2437R 36 $ 575.008"* 2438R* 80 $ 1,031.008"** 2438R-2** 85 $ 1,375.00
10"* 2439R* 129 $ 1,722.00
888-Metal to Metal seat
SIZE PART NO. WGT. LIST PRICE
2" 2434 5 $ 189.0021/2" 2432 7 $ 212.003" 2435 11 $ 218.004" 2436 18 $ 270.005" 2433 25 $ 469.006" 2437 36 $ 523.008"* 2438* 80 $ 938.008"** 2438-2** 85 $ 1,250.00
10"* 2439* 129 $ 1,565.00
Note: 2''-6'' are dual rated to fit between both ANSI class 125 &250 flangesFor viton seal add 20% to 888 list price* ANSI 125
** 250# Flanged
SPLIT DISC- Cast iron body with epoxy coating and split discdesign. (Model 895 SS-Disc and Model 848 Bronze-Disc) Waferconnection ANSI 125 2-12 EPDM, 14-24 NITRILE (Buna-N) ,PTFE bearing. Stainless steel spring hinge pin. Lifting ring std. above 4".
Temp Max: 180F (80C) Pressure Max: 200 PSI
SIZE 895 PART NO. WGT. LIST PRICE
2 " 3000 3 $ 152.0021/2" 3001 4 $ 178.003" 3002 7 $ 191.004" 3003 8 $ 246.005" 3004 13 $ 400.006" 3005 18 $ 396.008" 3006 21 $ 595.00
10" 3007 49 $ 899.0012" 3008 75 $ 1,213.00
Bronze Disc 1424
SIZE 848 PART NO. WGT. LIST PRICE
14" 2509 120 $ 2,985.0016" 2510 170 $ 4,985.0018" 2511 180 $ 5,900.0020" 2512 250 $ 7,968.0024" 2513 360 $11,451.00
Consult Factory for larger sizes up to 48.
10
402BTR/402BT- Cast iron body with epoxy coating. Flanged
connection ANSI B16.1, class 125. Metal to metal seating withstainless steel spring.
Note: For rubber seal NITRILE (Buna-N), add R to endof part number and 10% to list price.
Temp Max: 180 F (80C)Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24"
SIZE PART NO. WGT. LIST PRICE
2" 2239BT* 13 $ 339.0021/2" 2240BT 18 $ 410.003" 2241BT 23 $ 453.004" 2242BT 40 $ 582.005" 2243BT 51 $ 880.006" 2244BT 75 $ 998.008"* 2245BT** 116 $ 1,598.00
10" 2247BT 194 $ 2,297.0012"** 2248BT** 306 $ 3,799.0014" 2249BT 380 $ 5,988.00
16" 2250BT 500 $ 8,995.0018" 2251BT 724 $ POA20" 2252BT 890 $ POA24" 2254BT 1220 $ P OA
*Optional 316 SS seat trim available, add ST to end of part #and 25% to list price.
402BTR/402BT Discount Code B
848/895 SPLIT DISC Discount Code B
www.flomatic.com
CHECKVA
LVES800.83
3.2040
402BTR2/402BT2- Cast iron body with epoxy coating.
Flanged connection ANSI B16.1, class 250. Metal to metal seatingwith stainless steel spring.
Note: For rubber seal NITRILE (Buna-N), add R to endof part number and 10% to list price.
Temp Max: 180 F (80C)Pressure Max: 400 PSI: 21/2"-12", 300 PSI: 14" & 16"
SIZE PART NO. WGT. LIST PRICE
21/2" 2240BT2 30 $ 825.003" 2241BT2 36 $ 875.004" 2242BT2 59 $ 1,122.005" 2243BT2 78 $ 1,391.006" 2244BT2 103 $ 1,838.008" 2245BT2 179 $ 3,123.0010" 2247BT2 253 $ 4,484.0012" 2248BT2 401 $ 7,063.0014" 2249BT2 511 $ 9,750.0016" 2250BT2 697 $13,407.00
402BTR2/402BT2 Discount Code B
888S6R/888S6 Discount Code B
402S6R/402S6 Discount Code B
888R/888 Discount Code B
*
402S6R/402S6- 316 stainless steel body. Flanged connection
ANSI B16.1, class 150. Metal to metal seating with a stainlesssteel spring.
Note: For rubber seal NITRILE (Buna-N), add R to endof part number and 10% to list price.
Temp Max: 180 F (80C)Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-18"
SIZE PART NO. LIST PRICE
2" 2239S6 $ 954.1021/2" 2240S6 $ 1,154.203" 2241S6 $ 1,276.004" 2242S6 $ 1,638.506" 2244S6 $ 2,906.008" 2245S6 $ 4,710.0012" 2248S6 $15,117.0014" 2249S6 POA16" 2250S6 POA18" 2251S6 POA
888S6R/888S6- New patented design, all 316 stainless steelbody. Wafer connection ANSI 150/300. Metal to metal seating.For drip-tight sealing use rubber sealing.
Temp Max: 180F (80C)Pressure Max: 200 PSI ANSI 150, 400 PSI: ANSI 300
888S6-Metal to Metal seat
SIZE PART NO. LIST PRICE
2" 2434S6 $ 456.0021/2" 2432S6 $ 618.003" 2435S6 $ 719.004" 2436S6 $ 998.006" 2437S6 $ 1,986.008" 2438S6 $ 3,698.00
888S6R-Rubber seal drip-tight
SIZE PART NO. LIST PRICE
2" 2434S6R $ 500.0021/2" 2432S6R $ 680.003" 2435S6R $ 791.004" 2436S6R $ 1,097.006" 2437S6R $ 2,184.008"* 2438S6R* $ 4,068.00
Note: 2''-6'' are dual rated to fit between both ANSI class 150 &300 flanges
For viton seal add 20% to 888 list price
-
8/11/2019 2014 Price List.pdf
15/4011
78 Discount Code B
AWWA C508-01 SWING CHECK VALVESAll 90/92 available with limit switch, add $600 to list price and add LS to end of part #.
78A Discount Code B
90LS/92LS* Discount Code B 90LW/92LW* Discount Code B 90CS/92CS* Discount Code B
High Quality Valves Built to Last...
78- Cast iron body with epoxy coating. Flanged connection ANSIB16.1, class 125. Metal reinforced neoprene swing disc. In-lineserviceable.
Temp Max: 140F (60C)Pressure Max: 175 PSI: 3"-12", 150 PSI: 14"
SIZE PART NO. WGT. LIST PRICE
21/2" 2181 35 $ 525.003" 2182 38 $ 539.004" 2183 49 $ 689.006" 2185 106 $ 1,107.008" 2186 172 $ 2,350.0010" 2187 335 $ 4,984.00
Stainless steel seats optional on Model 92 only, add 10% to list price.*92 series 4", 6" and 8.
Epoxy coated blue. Model 90 is TMEMIC red primer N-140.
Note: Other seals are available that are chemically resistant
especially to chloramines. Please consult factory.
90LW/92LW- Cast iron body with epoxy primer. Meets AWWAC508 specifications. Flanged connection ANSI B16.1, class 125.Bronze trim with stainless steel shaft. Metal to metal or NITRILE(Buna-N) seal (Please specify add R to end of part number forrubber) Features external lever and weight.
Temp Max: 180F (80C)Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30"For vertical installation add V to part number.
SIZE PART NO. WGT. LIST PRICE
2" 2704LW 41 $ 1,568.00
3" 2706LW 71 $ 1,691.004"* 3707LW* 125 $ 1,598.006"* 3709LW* 224 $ 2,091.008"* 3710LW* 401 $ 3,121.008"** 3710LW-18 380 $ 3,626.0010" 2711LW 600 $ 6,695.0012" 2712LW 843 $ 9,425.0014" 2714LW 1323 $ 13,632.0016" 2716LW 1875 $ 17,860.0018" 2718LW 2110 $ 25,214.0020" 2720LW 2841 $ 29,837.0024" 2724LW 3927 $ 41,235.0030" 2730LW 5693 $ POA
90CS/92CS- Cast iron body with epoxy primer. Meets AWWAC508 specifications. Flanged connection ANSI B16.1, class 125.Bronze trim with stainless steel shaft. Metal to metal or NITRILE(Buna-N) seal (Please specify add R to end of part number for rub-ber) Features external lever and weight. Sealed end cushion closuresystem for adjustable rate of valve closure.
Temp Max: 180F (80C)Pressure Max: 200 PSI: 3"-12", 150 PSI: 14"-30"For vertical installation add V to part number.
SIZE PART NO. WGT. LIST PRICE
2 2704CS 47 $ 2,550.003" 2706CS 98 $ 3,090.004"* 3707CS* 195 $ 3,480.006"* 3709CS* 325 $ 4,023.008"* 3710CS* 455 $ 5,139.008"** 3710CS-18 435 $ 5,598.0010" 2711CS 780 $ 8,593.0012" 2712CS 1073 $ 13,172.0014" 2714CS 1495 $ 14,088.0016" 2716CS 2119 $ 19,946.0018" 2718CS 2386 $ 27,300.0020" 2720CS 3211 $ 30,459.0024" 2724CS 4440 $ 42,850.0030" 2730CS 4975 $ POA
** Short Body 18 Face to Face.** Short Body 18 Face to Face.
78A- Ductile iron angle body with epoxy coating. Flangedconnection ANSI B16.1, class 125. Metal reinforced neopreneswing disc. In-line serviceable. (same as ANSI 90 elbow dimen-sion)
Temp Max: 140F (60C)Pressure Max: 175 PSI: 3"-12", 150 PSI: 14"
SIZE PART NO. WGT LIST PRICE
3" 2182A 38 $ 539.004" 2183A 49 $ 689.006" 2185A 106 $ 1,107.008" 2186A 172 $ 2.350.0010" 2187A 335 $ 4,984.0012" 2188A 432 $ 6,953.1014" 2189A 690 $ 9,817.50
90LS/92LS*-Cast iron body with epoxy primer. Meets AWWAC508 specifications. Flanged connection ANSI B16.1, class 125.Bronze trim with stainless steel shaft. Metal to metal or NITRILE(Buna-N) seal (Please specify add R to end of part number forrubber) Features external lever and spring.
Temp Max: 180F (80C)Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30"For vertical installation add V to part number.
SIZE PART NO. WGT. LIST PRICE
2" 2704LS 46 $ 1,568.00
3" 2706LS 72 $ 1,691.004"* 3707LS* 119 $ 1,598.006"* 3709LS* 205 $ 2,091.008"* 3710LS* 359 $ 3,121.008"** 3710LS-18 339 $ 3,626.0010" 2711LS 537 $ 6,695.0012" 2712LS 748 $ 9,425.0014" 2714LS 1165 $ 13,632.0016" 2716LS 1645 $ 17,860.0018" 2718LS 1860 $ 25,214.0020" 2720LS 2495 $ 29,837.0024" 2724LS 3440 $ 41,235.0030" 2730LS 4975 $ POA
** Short Body 18 Face to Face.
93LW Discount Code B
93LW- Swing check valve with outside lever and weight. Castiron body with epoxy coated. Meets AWWA C508 specifications.Flanged connection ANSI B16.1, class 125. Bronze trim withstainless steel shaft. Metal to metal seating standard, rubberoptional consult factory. Features external lever and weight.Imported.
Temp Max: 180F (80C)Pressure Max: 200 PSI: 2"-12"
SIZE PART NO. WGT. LIST PRICE
2" 2804LW 30 $ 910.003" 2806LW 54 $ 975.004" 2807LW 85 $ 996.006" 2809LW 137 $ 1,268.008" 2810LW 240 $ 1,989.0010" 2811LW 545 $ 3,763.0012" 2812LW 745 $ 5,395.00
ARRA compliant made in USA
-
8/11/2019 2014 Price List.pdf
16/40
SIZE PART NO. WGT. LIST PRICE 3"* 2382BFPI 40 $ 1,055.004"* 2383BFPI 68 $ 1,177.006" 2385BFPI 128 $ 1,622.008" 2386BFPI 235 $ 2,420.00
10" 2387BFPI 380 $ 3,710.0012" 2388BFPI 620 $ 5,178.0014" 2390BFPI 740 $ 7,493.0016" 2391BFPI 1,035 $ 9,610.0018" 2392BFPI 1,540 POA20" 2393BFPI 1,835 POA24" 2394BFPI 2,475 POA
SIZE PART NO. WGT. LIST PRICE
2" 2380 27 $ 418.0021/2" 2381 35 $ 495.003"* 2382 40 $ 517.004"* 2383 68 $ 581.006" 2385 128 $ 902.008" 2386 235 $ 1,540.00
10" 2387 380 $ 2,860.0012" 2388 620 $ 3,960.0014" 2390 740 $ 5,885.0016" 2391 1,035 $ 7,897.0018" 2392 1,540 $ 9,130.0020" 2393 1,835 $11,330.0024" 2394 2,475 $17,930.00
SIZE PART NO. WGT. LIST PRICE
2" 2380BF 27 $ 667.0021/2" 2381BF 35 $ 736.003"* 2382BF 40 $ 739.004"* 2383BF 68 $ 867.006" 2385BF 128 $ 1,306.008" 2386BF 235 $ 2,074.0010" 2387BF 380 $ 3,337.00
12" 2388BF 620 $ 4,790.0014" 2390BF 740 $ 7,062.0016" 2391BF 1,035 $ 9,157.0018" 2392BF 1,540 POA20" 2393BF 1,835 POA24" 2394BF 2,475 POA
SIZE PART NO. WGT. LIST PRICE 3"* 2382LS 42 $ 1,200.004"* 2383LS 70 $ 1,279.006" 2385LS 130 $ 1,631.008" 2386LS 237 $ 2,184.0010" 2387LS 382 $ 3,380.0012" 2388LS 622 $ 4,780.0014" 2390LS 742 $ 6,656.0016" 2391LS 1,037 $ 8,739.0018" 2392LS 1,542 POA20" 2393LS 1,837 POA24" 2394LS 2,477 POA
12
745 WITH POSITION INDICATOR AND BACKFLUSHDEVICE- 45 Seat Flo-Flex, Swing Check Valve Epoxy coatedDuctile Iron Body, ANSI B16.1, class 125, ANSI/AWWA C508, witha Buna-N coated Disc.
Temp Max: 140F (60C) Pressure Max: 250 PSI
745 WITH BACKFLUSH DEVICE- 45 Seat Flo-Flex,Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,class 125, ANSI/AWWA C508, with a Buna-N coated Disc.
Temp Max: 140F (60C) Pressure Max: 250 PSI
745- 45 Seat Flo-Flex, Swing Check Valve Epoxy coatedDuctile Iron Body, ANSI B16.1, class 125, ANSI/AWWA C508, withBuna-N coated Disc.
Temp Max: 140F (60C) Pressure Max: 250 PSI
745PI Discount CodeB745BF Discount CodeB745 Discount CodeB
SIZE PART NO. WGT. LIST PRICE
3"* 2382PI 40 $ 810.004"* 2383PI 68 $ 887.006" 2385PI 128 $ 1,239.008" 2386PI 235 $ 1,792.00
10" 2387PI 380 $ 2,988.0012" 2388PI 620 $ 4,388.0014" 2390PI 740 $ 6,264.00
16" 2391PI 1,035 $ 8,347.0018" 2392PI 1,540 POA20" 2393PI 1,835 POA24" 2394PI 2,475 POA
745 WITH POSITION INDICATOR- 45 Seat Flo-Flex,Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,class 125, ANSI/AWWA C508, with a Buna-N coated Disc.
Temp Max: 140F (60C) Pressure Max: 250 PSI
745BFPI Discount CodeB
High Quality Valves Built to Last... www.flomatic.com
SWINGCHECKVALVES
800.833.2040
Note: Other seals are available that are chemically resistant especially tochloramines. Please consult factory.
Fusion Epoxy Coated Ductile Iron Body Buna-N coated Disc. Optional Backflush Device Available Optional Disc Position Indicator Availab Optional Proximity Switch Model 745PS Optional Stainless Steel Fasteners
745 Features
745LS Discount CodeB
Backflush device (Model 745B
Valve Disc PositionIndicator (Model 745PI)
Limit Switch
Add S to end of part number for Stainless Steel fasteners. 10% mark up.
745 WITH LIMIT SWITCH (SPDT) - 45 Seat Flo-Flex,Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,class 125, ANSI/AWWA C508, with a Buna-N coated Disc.
Temp Max: 140F (60C) Pressure Max: 250 PSI
-
8/11/2019 2014 Price List.pdf
17/40
208T- Corrosion resistant PVC body. Threaded female x femaleconnection. NITRILE (Buna-N) self-cleaning ball E-Z access portwith NITRILE (Buna-N) seal. Also available with socket
weldchange part number from T to Ssame pricing.Temp Max: 150F (65C) Pressure Max: 100 PSI
SIZE PART NO. WGT. LIST PRICE
1" 2131T 1 $ 46.0011/4" 2132T 1 $ 47.00
11/2" 2133T 2 $ 73.002" 2134T 2 $ 73.00
Note: For BSPP threads, change part number from T to P.
NOT FOR GROUND BURIAL.
13
508- Cast iron body with epoxy coating. Threaded female xfemale connection. Standard corrosion resistant phenolic SinkingBall 2 Bolt access cover. Also available with special FloatingBall for flood control or air vent applicationadd FB to partnumber and 35% to list price.
Temp Max: 180F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE
1" 3232 3.5 $ 180.0011/4" 3233 4.5 $ 183.00
11/2" 3234 6 $ 185.002" 3235 8 $ 225.00
21/2" 3236 11.5 $ 539.003" 2044 30 $ 525.004"* 2045* 45 $ 961.00
Note: 3" and 4", has no access cover, quick disconnect valvesystem.
*Connection is flanged ANSI 125, no floating ball available.
508 Discount Code B
408 & 4082- Cast iron body with epoxy coating and access port,flanged connection ANSI B16.1, class 125. NITRILE (Buna-N) coveredmetal ball. Sinking Type, stainless steel fasteners. Also available withspecial Floating Ball for flood control or air vent applicationsadd FBto `part number and 35% to list price.
Temp Max: 180F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE
3"* 21442* 45 $ 622.004"* 21452* 62 $ 770.005" 2143 90 $ 1,525.006" 2146 102 $ 1,550.008" 2147 218 $ 2,955.0010" 2148 355 $ 6,939.0012" 2149 624 $ 9,911.0014" 2150 882 $14,864.00
*New 4082 model meets AWWA C508 flange to flange lay lengths,and are ductile iron.
408 & 4082 Discount Code B
208- Cast iron body with epoxy coating and clean-out port.
Threaded female x female connection. Features NITRILE (Buna-N)Sinking Ball.
Temp Max: 180F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE
11/4" 2141 4.5 $ 91.00
11/2" 2142-0 9.5 $ 117.002" 2142 9 $ 117.00
408PRX & 4082 PRX Discount Code B
408PRX & 4082 PRX- Model 408 ball check valve with aproximity switch.
Temp Max: 180F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE
3"* 21442PRX* 45 $ 1045.004"* 21452PRX* 62 $ 1199.005" 2143PRX 90 $ 1,947.006" 2146PRX 102 $ 2,136.008" 2147PRX 218 $ 3,380.0010" 2148PRX 355 $ 7,368.0012" 2149PRX 624 $10,399.0014" 2150PRX 882 $15,369.00
*New 4082 model meets AWWA C508 flange to flange lay lengths,and are ductile iron.
77- Auto-Vac Vacuum Breaker -This 1 valve is avail-able in stainless steel and PVC. All internal parts are engineeredcomposite, with a stainless steel disc and resilient seat. Used toprevent water hammer in wastewater valves.
Temp Max: 180F (80C) Pressure Max: 400 PSI
MATERIAL PART NO. CASE QTY. LIST PRICE
PVC 4701P 12 $ 56.52Stainless Steel 4701SS 12 $ 69.87
77 Discount Code B
208T Discount Code B208 Discount Code B
Horizontal installation
requires a 20 statichead on Ball ChecksRecommended for flow
velocity of 3 to 5per sec. For higher
flow, consult factory.
www.flomatic.com High Quality Valves Built to Last.
ARRA-Compliant
Pictured withoptional Auto-Vac.
Add 77 to the endof part number.
208B Discount Code B
208B- Same as Model 208 with bosses for rail mounting. Castiron body with epoxy coating and clean-out port. Threaded femalex female connection. Features NITRILE (Buna-N) Sinking Ball.
Temp Max: 180F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE
11/4" 2141B 5 $ 92.00
11/2" 2142-0B 10 $ 118.002" 2142B 10.5 $ 118.00
VERTICAL
MOUNTING
Seat up
HORIZONTAL
MOUNTING
Lodging of the ball belowthe axis. The arrow showsthe direction in which theliquid is rising.
OPERATION OF THE FLOATING BALL
APPLICATIONS for Model 408FBTO AVOID OVERFLOW OF WATER RISING AND ALSO ALLOW GASEVACUATION IN F ILLING OF TANKS OR PIPES (AIR-VENT).
OPTIONAL FLOATING BALL
-
8/11/2019 2014 Price List.pdf
18/4014
100MP- High-strength Noryl GTX 830 Body with NITRILE(Buna-N) seal and polypropylene follower. Threaded male xfemale connection.
Temp Max: 150F (65C) Pressure Max: 300 PSI
SIZE PART NO. CASE QTY. LIST PRICE
11/4"M x 1"F 4221MP 49 $ 19.00
11/4"M x 11/4"F 4242MP 49 $ 24.00
Note: For BSP and BSPP threads CONSULT FACTORY.
901- Non-corrosive acetal body and guide. Insert connection.Features NITRILE (Buna-N) seal and stainless steel spring.
Temp Max: 180F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE 3/8" 2011 .1 $ 9.401/2" 2000 .18 $ 9.503/4" 2001 .35 $ 11.00
1" 2030 .5 $ 16.50
100MP Discount Code A 901 Discount Code A
The 297D- is an acetal body. Threaded female x femaleconstruction. Features a VITON seal, Nylon 11 poppet andstainless steel spring.
Temp Max: 180F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE 3/8" 5359 .04 $ 28.001/2" 5239 .06 $ 35.00
The 290P is a Polypropylene body and poppet with stainlesssteel spring and VITON seal.
SIZE PART NO. WGT. LIST PRICE 3/8" 5356 .04 $ 33.001/2" 5357 .06 $ 35.003/4" 5358 .06 $ 59.00
297D/290P Discount Code A
FLOMATIC VALVES IS AN ACTIVE MEMBER INTHESE INDUSTRY ASSOCIATIONS AND OTHERS VISIT
OUR WEBSITE ATwww.flomatic.com
Updated Daily!
High Quality Valves Built to Last... www.flomatic.com
PLASTICC
HECKVALVES
800.833.20
40
Insert connection used in conjunction with a water mwhen protection from contamination is required
P R O D U C T A P P L I C A T I O N 9 0
OUR WEBSITE NOW FE TURING:
LIVE
H T
3D
NIM TIONS
SHIPMENT
TR KING
UPD TED
PRODU T
PPROV L
MODE
WATER METER
www.flomatic.com
www.watersystemscouncil.org
-
8/11/2019 2014 Price List.pdf
19/4015www.flomatic.com
KWIK-CLOSE Discount CodeB
SERIES 6000 (NICKEL PLATED DUCTILE IRON DISC)Wafer Style butterfly valve,cast iron body. Seat Liner EPDMstandard ISO top flange. 10 position lever handle.
Working Temp: Max+230F (+110C) Pressure Max: 200 PSI
SIZE SERIES 6000 WGT.LIST PRICE
LEVER HANDLE
2" 6102000 8 $ 59.003" 6103000 9 $ 82.004" 6104000 13 $ 82.006" 6106000 18 $ 138.008" 6108000 37 $ 218.0010" 6110000 51 $ 328.0012" 6112000 68 $ 438.0014"* 149U003685 80 $ 768.0016"* 149U003686 137 $ 1,056.00
SIZE PART NO. WGT. LIST PRICE (Ductile Iron Disc) WITH GEAR
3" 450100060 434" 450100070 546" 450000090 748" 450000100 13410" 450000110 18812" 450000120 26114" 450000140 38016" 450000160 41418" 450000180 53220" 450000200 65324" 450000240 739
$ 513.00
$ 615.00
$ 776.00
$ 1,111.00
$ 1,488.00
$ 2,251.00
$ 2,916.00
$ 4,088.00
$ 4,308.00
$ 4,968.00
$ 7,776.00
*Polyamide Coated DI Disc.,Gear Operated
FLANGED BUTTERFLY VALVESMunicipal Water & Waste WaterAWWA C504:
Proof of design
available upon request.
Metal certificationupon request.
Fusion epoxy paint
V-type packing
Seat Buna-N
Ductile Iron disc,316SS edge
MODEL 45 (Lever Operated) - Cast ductile iron flangedbody. ASTM A536 Cast ductile iron disc with stainless type 316edge. Seat standard NBR (EPDM optional) bonded andvulcanized. Designed to AWWA standard C504, class 150B.Electric/pneumatic actuation available.
Working Temp: Max+180F (82C) Pressure Max: 200 PSI
SIZE PART NO. LIST PRICE WITH LEVER
3" 450100061 $ 484.004" 450100071 $ 593.006" 450100091 $ 754.00
AZURE Discount CodeB
MODEL 45 - Electric actuated, Azure butterfly valve,110 vac power, manual handwheel override for open/closeservice.
SIZE PART NO. WGT. LIST PRICE (Ductile Iron Disc) WITH GEAR
3" 4501000620000 61 $2,299.004" 4501000720000 72 $2,453.006" 4500000920000 82 $3,144.008" 4500001020000 165 $4,112.0010" 4500001120000 220 $4,942.0012" 4500001220000 300 $6,015.0014" 4500001420000 530 $7,203.0016" 4500001620000 564 $10,146.0018" 4500001820000 686 $12,699.0020" 4500002020000 823 POA24" 4500002420000 910 POA
*Modulating available POA
AZUREBUTTERFLYw/ACTUATOR Discount CodeBAZURE Discount CodeB
MODEL 45 (Gear Operated) - Ductile iron flanged body.ASTM A536 ductile iron disc with stainless type 316 s teel edge.Seat, standard NBR (EPDMoptional)vulcanized.Designed to
AWWA standard C504,class 150B. Electric/pneumatic actuationavailable.
Working Temp: Max+180F (82C) Pressure Max: 200 PSI
SMART CARD Discount CodeB
SMART CARD - New digital high resolution controller foruse in the Flomatic FCEL Series Electric Actuators.
The DHC-100 is a high resolution controller/positioner:
for use in the FCEL series AC electric actuators
with operating times from 2 to 120 seconds
that can be configured for various command types (4-20mA,1-5V, 0-5V, 0-10V, or a digital command) and a fail positionon loss of signal
With its modular design a variety of options are easily pluggedin providing other features. A wide range of data is accessiblethrough a digital communications module providing additionalcontrol and information.
-
8/11/2019 2014 Price List.pdf
20/40www.flomatic.comHigh Quality Valves Built to Last...
BUTTERFLY
VALVES800.833.2040
16
SYLAX LUG (DI) Discount CodeB SYLAX WAFER (DI) Discount CodeBOPTIONS:OPTIONS:
Gear
Explosion & Water Proof
Auxiliary limit switches
Shaft extensions
Valve disc position indicator
OPTIONAL SEATS:OPTIONAL SEATS:
Buna-N
Viton
PTFE (Different valve body)
SYLAX WAFER (SS) Discount CodeBGEAROPERATOR Discount CodeB
149G (DUCTILE IRON DISC) - SYLAXFull Lug Series Castiron body with epoxy coated ductile iron disc. Seat Liner EPDM(Buna-N optional) with standard ISO top flange for directmounting of actuator.
Working Temp: Max+230F (+110C) Pressure Max: 200 PSI
SIZE PART NO. WGT LIST PRICE LIST PRICE (Ductile Iron Disc) WITH LEVER WITH GEAR
2" 149G037290 9 $ 128.58 $ 259.4921/2" 149G037291 11 $ 134.94 $ 261.003" 149G037292 12 $ 145.37 $ 280.244" 149G037293 19 $ 196.83 $ 351.605" 149G037294 22 $ 248.44 $ 376.256" 149G037295 26 $ 299.81 $ 442.058" 149G037296 51 $ 422.00 $ 603.0910" 149G037297 61 $ 577.10 $ 807.3312" 149G037299 93 $ 709.63 $ 923.91
Up to 24 available CONSULT FACTORY.
149G (DUCTILE IRON DISC)- SYLAXWafer Style SeriesCast iron body with epoxy coated ductile iron disc.Seat Liner EPDM (Buna-N optional) with standard ISOtop flange for direct mounting of actuator.
Working Temp: Max+230F (+110C) Pressure Max: 200 PSI
SIZE PART NO. WGT LIST PRICE LIST PRICE (Ductile Iron Disc) WITH LEVER WITH GEAR
2" 149G010894 8 $ 114.71 $ 225.6521/2" 149G010909 8 $ 127.41 $ 238.353" 149G010928 9 $ 141.50 $ 252.44
4" 149G010955 13 $ 164.43 $ 284.885" 149G010989 17 $ 222.15 $ 342.606" 149G011005 18 $ 252.17 $ 372.628" 149G016257 37 $ 316.10 $ 483.7710" 149G41010 51 $ 488.20 $ 655.8812" 149G023900 73 $ 644.76 $ 866.64
Up to 24 available CONSULT FACTORY.
149G (316SS DISC)- SYLAXWafer Style Series - Castiron body with 316 stainless steel disc. Seat Liner EPDM(Buna-N optional) with standard ISO top flange for directmounting of actuator.
Working Temp: Max+230 F (+110C) Pressure Max: 200 PSISIZE PART NO. WGT LIST PRICE LIST PRICE
(316SS Disc) WITH LEVER WITH GEAR
2" 149G011266 8 $ 140.85 $ 251.7921/2" 149G011287 8 $ 151.36 $ 262.293" 149G011297 9 $ 171.23 $ 282.174" 149G011316 13 $ 207.29 $ 327.745" 149G011334 17 $ 262.95 $ 383.406" 149G011343 18 $ 298.25 $ 418.698" 149G016281 37 $ 542.36 $ 684.2010" 149G013612 51 $ 908.53 $1,032.9412" 149G037310 57 $1,140.84 $1,487.97
Up to 24 available CONSULT FACTORY.
SYLAX LUG (SS) Discount CodeB
149G (316SS DISC) - SYLAXFull Lug Series - Cast ironbody with 316 stainless steel disc. Seat Liner EPDM(Buna-N optional) with standard ISO top flange for directmounting of actuator.
Working Temp:Max+230F (+110C) Pressure Max: 200 PSISIZE PART NO. WGT LIST PRICE LIST PRICE
(316SS Disc) WITH LEVER WITH GEAR
2" 149G037300 9 $ 186.33 $ 265.9221/2" 149G037302 11 $ 187.84 $ 288.043" 149G037303 12 $ 196.16 $ 305.154" 149G037305 19 $ 259.36 $ 358.395" 149G037306 22 $ 313.75 $ 416.436" 149G037307 26 $ 399.91 $ 497.728" 149G037308 51 $ 703.94 $ 864.6410" 149G037309 61 $ 936.42 $1,104.0912" 149G023904 93 $1,202.74 $1,401.04
Up to 24 available CONSULT FACTORY.
Gear Operators for Sylax Butterfly ValvesAdd G to Lever Operated part number for a gearoperated valve. With position indicator on top of gear box.
Up to 24 available CONSULT FACTORY.
-
8/11/2019 2014 Price List.pdf
21/4017www.flomatic.com High Quality Valves Built to Last.
2" $ 1,951.4021/2" $ 1,956.903" $ 1,969.004" $ 2,058.105" $ 2,083.406" $ 2,592.708" $ 3,289.00
10" $ 3,917.1012" $ 4,714.60
Up to 24 available CONSULT FACTORY.
Series 6000
SYLAX LUG ELECTRICACTUATED(DI) Discount CodeB
SYLAX LUG ELECTRICACTUATED(SS) Discount CodeB BUTTERFLY VALVE
SYLAX WAFER STYLE SERIES 149GABody: Cast IronDisc: Epoxy Coated Ductile Iron
Seat Liner: EPDM
SYLAX WAFER (DI)ELECTRIC ACTUATED Discount CodeB
SYLAX WAFER (SS)ELECTRIC ACTUATED Discount Code B
SYLAX WAFER STYLE SERIES 149GABody: Cast IronDisc: 316 Stainless SteelSeat Liner: EPDM
PNEUMATIC ACTUATED
Pneumatic Actuated
2-24Double Acting and Spring Return
Price on Application
Butterfly Valves 3"- 24"
AWWA C504
See page 15
CHAINWHEEL OPTION
Chainwheel Option
2-24
(Use with gear option)
Price on Application
SYLAX FULL LUG SERIES 149GABody: Cast IronDisc: 316 Stainless SteelSeat Liner: EPDM
2" 149G037300A21/2" 149G037302A3" 149G037303A
4" 149G037305A5" 149G037306A6" 149G037307A8" 149G037308A
10" 149G037309A12" 149G037310A
Up to 24 available CONSULT FACTORY.
333536
464653103125159
333536464653103125159
$ 1,978.90
$ 1,987.70
$ 2,002.00
$ 2,095.50$ 2,130.70
$ 2,646.60
$ 3,395.70
$ 4,109.60
$ 4,924.70
SIZE PART NO. WGT. LIST PRICE (316SS Disc)
SIZE PART NO. WGT. LIST PRICE (Ductile Iron Disc)149G010894A149G010909A149G010928A149G010955A149G010989A149G011005A149G016257A149G41010A149G023900A
2" $ 1,969.0021/2" $ 1,975.603" $ 1,991.004" $ 2,082.305" $ 2,113.106" $ 2,626.808" $ 3,356.10
10" $ 4,041.4012" $ 4,847.70
Up to 24 available CONSULT FACTORY.
32323337414598115149
SIZE PART NO. WGT. LIST PRICE (316SS Disc)
149G011266A149G011287A149G011297A149G011316A149G011334A149G011343A149G016281A149G013612A149G023904A
2" $ 1,960.2021/2" $ 1,966.803" $ 1,978.90
4" $ 2,069.105" $ 2,097.706" $ 2,609.208" $ 3,323.10
10" $ 3,978.7012" $ 4,770.70
Up to 24 available CONSULT FACTORY.
SYLAX FULL LUG SERIES 149GABody: Cast IronDisc: Epoxy Coated Ductile IronSeat Liner: EPDM
333536
464653
103125159
SIZE PART NO. WGT. LIST PRICE (Ductile Iron Disc)
149G037290A149G037291A149G037292A
149G037293A149G037294A149G037295A149G037296A149G037297A149G037299A
-
8/11/2019 2014 Price List.pdf
22/4018
333E-ENVIRO FOOT VALVE- body with high strength acetalpoppet. Tappered stainless steel strainer, end cap, spring and
fasteners. NITRILE (Buna-N) seal.Temp Max: 180F (80C) Pressure Max: 250 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4171E .6 50 $ 48.2111/4" 4172E .8 36 $ 58.16
60SE-ENVIRO FOOT VALVE- body with threaded femaleconnection. Features a NITRILE (Buna-N) seal, acetal poppet (21/2",
3" and 4" have bronze poppets) stainless steel spring and strainer.Temp Max: 180F (80C) Pressure Max: 250 PSI (1/2" size 150 PSI)
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1/2"* 5820E* .1 10 $ 35.273/4" 4100E .3 100 $ 39.381" 4101E .8 50 $ 43.76
11/4"** 4102E** .8 50 $ 50.63
11/4" 4103E 1 36 $ 52.31
11/2" 4104E 1.6 25 $ 85.242 " 4105E 2.1 16 $ 135.2221/2" 4106E 6 $ 448.123" 4107E 11 $ 617.904" 4108E 19 $ 1,028.14
*Polyethylene strainer
**Model 600S (4102E) will pass through a 2" pipe.
190D- Acetal body and strainer, Nylon 11 poppet.Stainless steel spring and NITRILE (Buna-N) seal.
193D- Similar to the 190D with one-piece acetal bodyand strainer.190P- Polypropylene body and strainer. Stainless steel springand VITON seal.
Temp Max: 140F (60C)
SIZE PART NO. MODEL WGT. CASE QTY. LIST PRICE
3/8" 5619 193D .03 10 $ 17.853/8" 5726 190P .03 10 $ 17.961/2" 5620 193D .03 10 $ 30.451/2" 5727 190P .03 10 $ 33.173/4" 5728 190P .08 10 $ 34.65
11/2" 5724 190D .28 6 $ 43.052 " 5725 190D .41 6 $ 89.25
104PS- Features rugged high-strength noryl GTX 830 valvebody with a tapered stainless steel, with a NITRILE (Buna-N) sealand polypropylene follower.
Temp Max: 140F (60C) Pressure Max: 150 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
11/4" 5733PS .21 36 $ 31.32
333DPE-ENVIRO FOOT VALVE- body, but with dual pur-pose male and female threads.
Temp Max: 180F (80C) Pressure Max: 250 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE
11/4"M x 1"F 4181E .5 50 $ 53.87
11/2"M x 11/4"F 4182E .8 36 $ 63.75
333DPE Discount CodeA333E Discount CodeA60SE Discount CodeA
124P- features a simple flow through design with corrosionresistant parts. Durable Nylon body that has a 4 in 1 combofeature (3/4" 11/2")
Temp Max: 140F (60C) Pressure Max: 150 PSI
SIZE PART NO. WGT. Enters Pipe Size LIST PRICE
3/4" - 11/2" 5728P .25 2'' $ 24.952" 5725P .33 3'' $ 43.10
FLOMATICFLOMATICFREIGHTFREIGHTPOLICYPOLICY
We offer fast delivery
A & C Code items:$1,500.00 net prepaid
B Code items: FOB Factory
Minimum Net Order of $75.00
333SS- FOOT VALVE- All 303 Stainless steel body with highstrength acetal poppet. Tappered stainless steel strainer, end cap,spring and fasteners. NITRILE (Buna-N) seal.
Temp Max: 180F (80C) Pressure Max: 250 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4171SS .6 50 $ 59.0211/4" 4172SS .8 36 $ 71.19
333SS Discount CodeA
104P- Reinforced nylon body with threaded female connection.Polyethylene strainer, polyethylene/acetal poppet. NITRILE(Buna-N) seal and stainless steel spring.
Temp Max: 150F (65C) Pressure Max: 150 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
3/4" 5731 .08 10 $ 17.281" 5732 .13 50 $ 19.95
11/4" 5733 .21 36 $ 27.30
124P Discount CodeA
190D/193D/190P Discount CodeA
High Quality Valves Built to Last... www.flomatic.com
FOOTVALVES800.833
.2040
104P Discount CodeA 104PS Discount CodeA
-
8/11/2019 2014 Price List.pdf
23/4019
812XTF- All 316 stainless steel, threaded female connection.
Metal to metal seating and teflon O-ring.2"-4" available with socket weld connection.Consult factory forpricing.11/2"-4" available with NITRILE (Buna-N) or VITON seal,add 10% to list (Model 812XRF/812XVF).
* Temp Max: 400F (200C) * Pressure Max: 300 PSI
SIZE PART NO. WGT. LIST PRICE 1/2" 2420XTF 2 $ 300.003/4" 2421XTF 4 $ 370.001" 2422XTF 5 $ 551.00
11/4" 2423XTF 9 $ 671.00
11/2" 2424XTF 12 $ 744.002" 2425XTF 14 $ 885.00
21/2" 2426XTF 14 $ 1,548.003" 2427XTF 25 $ 1,783.004" 2428XTF 39 $ 2,030.005" 2429XTF 62 $ 4,323.00
6" 2430XTF 80 $ 5,148.008" 2431XTF 140 $ 9,000.00
* Consult factory for temp. & pressure rating .
63- Cast iron body with epoxy coating. Features threaded female
connection. NITRILE (Buna-N) seal, high strength non-metallic orunleaded bronze or ductile iron poppet, stainless steel spring.Heavy duty polyethylene strainer.
Temp Max: 180F (80C) Pressure Max: 250 PSI
SIZE PART NO. WGT. LIST PRICE
2"* 4764 4 $ 82.4921/2" 4765 5 $ 135.513" 4766 9 $ 175.314" 4767 17 $ 225.65
6"** 4789VFD 36 $ 895.00
*2" Acetal guide.
2 1/2" - Unleaded bronze guide. 3"-6" Ductile iron poppet.** Galvanized Strainer Only.For Municipal applications see 302BT below
357- Cast iron body and strainer. Threaded female connection.
Hinged leather seat.Temp Max: 80F (27C) Pressure Max: 75 PSI
SIZE PART NO. WGT. LIST PRICE
11/4" 4962 3 $ 164.54
11/2" 4963 3 $ 160.142" 4964 6 $ 165.833" 4966 13 $ 272.444" 4967 20 $ 377.926" 4969 45 $ 638.658" 4970 99 $ 1,316.00
357 Discount CodeA 63 Discount CodeB 812XTF Discount CodeB
812XFF- All 316 stainless steel. Flanged connection ANSI 150.Metal to metal seating and teflon O-ring.
11/2"-4" available with NITRILE (Buna-N) or VITON seal, add10% to list (Model 812XRF/812XVF).
* Temp Max: 300F (150C) * Pressure Max: 275 PSI
SIZE PART NO. WGT. LIST PRICE 1/2" 2420XFF 2.5 $ 380.003/
4" 2421XFF 4.6 $ 488.001" 2422XFF 5.7 $ 733.0011/4" 2423XFF 9.8 $ 840.00
11/2" 2424XFF 13 $ 949.002" 2425XFF 15 $ 1,251.00
21/2" 2426XFF 13 $ 1,726.003" 2427XFF 27 $ 2,053.004" 2428XFF 43 $ 2,801.005" 2429XFF 65 $ 5,591.006" 2430XFF 85 $ 7,450.008" 2431XFF 150 $12,559.00
* Consult factory for temp. & pressure rating .
812XFF Discount CodeB
302BT- Cast iron body with epoxy coating, bronze disc and seat(2"-12"). Flanged connection ANSI B16.1, class 125. Features aBuna and stainless steel strainer.
Temp Max: 180F (80C)Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24"
SIZE PART NO. WGT. LIST PRICE
2" 4763BT 23 $ 925.0021/2" 4768BT 30 $ 935.00
3" 4769BT 37 $ 940.004" 4770BT 63 $ 1,111.005" 4771BT 80 $ 1,509.006" 4772BT 100 $ 1,694.008" 4774BT 160 $ 2,500.0010" 4775BT 260 $ 3,432.0012" 5416BT 410 $ 4,800.0014" 5417BT 500 $ 9,200.0016" 5418BT 650 $ 11,600.0018" 5419BT 850 $ POA20" 5420BT 1050 $ POA24" 5422BT 1440 $ POA
Also available as model 302S6T with 316SS trim and model 302S6all 316SS design.
302BT Discount CodeB
80S6F - Foot Valve- All 316 stainless steel threaded check valvebody. Stainless steel spring, poppet, strainer and Buna-N seal,VITON optional.
Temp Max: 400F (200C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE
1" 4031S6F 2.1 $ 238.0011/4" 4032S6F 2.4 $ 307.00
11/2" 4033S6F 5.0 $ 316.002" 4034S6F 7.0 $ 513.003" 7938S6F 15 $ 1,097.004" 7939S6F 30 $ 1,650.006" 4089S6F 75 $ 6,458.008" 4090XSSF 105 $ 8,314.0010" 4091XSSF 190 $14,500.00
80S6F Discount CodeA
www.flomatic.com High Quality Valves Built to Last.
REFER TO PAGE 34 FOR
LOCAL SALES REPS BY STATE
-
8/11/2019 2014 Price List.pdf
24/4020
6P STRAINER- Plastic (polyethylene) with male NPT threads.Converts a check valve to a foot valve, by screwing into the valvethreads.
Temp Max: 180F (80C)
STRAINER ONLY
SIZE PART NO. WGT. CASE QTY. LIST PRICE
3/4" 4300P .1 25 $ 5.751" 4301P .1 25 $ 6.02
11/4" 4302P .2 25 $ 6.77
11/2" 4303P .3 10 $ 6.77
6P STRAINER Discount CodeA
46 STRAINER- Cast iron body with epoxy coating. Flanged con-nection ANSI 125. Plastic 2"-4" stainless steel 5"-24" strainer.
SIZE PART NO. WGT. LIST PRICE
2" 5814P 4.7 $ 165.0021/2" 5815P 6.4 $ 167.003" 5816P 8.8 $ 220.004" 5817P 13 $ 350.005" 5821S 16 $ 447.006" 5822S 21 $ 488.008" 5824S 44 $ 728.0010" 5825S 55 $ 1,150.0012" 5826S 80 $ 1,589.00
14" 5827S 121 $ 2,524.0016" 5828S 166 $ 3,225.0018" 5829S 211 $ 4,043.0020" 5830S 256 $ 4,177.0024" 5832S 346 $ 5,513.00
P: Plastic 2"-4"S: Stainless steel 5"-24"
46 STRAINER Discount CodeB
46T STRAINER- Cast iron body with epoxy coating. Threadedfemale connection. Removable polyethylene strainer.
Temp Max: 180F (80C)
SIZE PART NO. WGT. LIST PRICE
2" 4364 2.5 $ 87.0021/2" 4365 4 $ 140.003" 4366 8.2 $ 147.004 " 4367 14 $ 199.00
46T STRAINER Discount CodeB
16FL STRAINER Discount CodeB
16FL STRAINER- All 316 Stainless steel body, flanged with316SS internal strainer. Standard 20 mesh replacement screensoptional 40, 60, 80 and 100 mesh s creens (fit inside of 20 mesh).ASME 150 Class.
Standard 20 Mesh if optional 40, 60, 80, or 100 add toend of part number: 40 Mesh = 040 to end of part number
60 Mesh = 060 to end of part number80 Mesh = 080 to end of part number100 Mesh = 100 to end of part number
X in part # below 1 for stainless steel and 2 for carbon
*Temp Max: 800F *Pressure Max: 600 PSI
*See temperature/pressure rating.STAINLESS CARBON
SIZE PART NO. LIST PRICE LIST PRICE
1" S0014-X-0300 $ 272.00 $ 341.0011/2" S0154-X-0300 $ 456.75 $ 525.002" S0024-X-0300 $ 637.35 $ 640.00
Strainers supplied with FNPT tapped retainer cap for blow off outlet.Strainers supplied with PTFE cap seal.Optional graphite list price cap seal adder: $15.00
16 STRAINER Discount CodeB
16 STRAINER- All 316 Stainless steel body, threaded FNPTY-Type strainer. Standard 20 mesh replaceable screens optional40, 60, 80 and 100 mesh screens ( fit inside of 20 mesh).ASME 600 Class.
Standard 20 Mesh if optional 40, 60, 80, or 100 add toend of part number: 40 Mesh = 040 to end of part number
60 Mesh = 060 to end of part number80 Mesh = 080 to end of part number100 Mesh = 100 to end of part number
X in part # below 1 for stainless steel and 2 for carbon*Temp Max: 800F *Pressure Max: 600 PSI*See temperature/pressure rating.
STAINLESS CARBON SIZE PART NO. LIST PRICE LIST PRICE
1/4" S2501-X-0300 $ 125.00 $ 132.003/8" S3751-X-0300 $ 131.25 $ 132.001/2" S5001-X-0300 $ 131.25 $ 132.003/4" S7501-X-0300 $ 157.50 $ 132.00
1" S0011-X-0300 $ 183.75 $ 157.0011/4" S1251-X-0300 $ 198.45 $ 184.00
11/2" S0151-X-0300 $ 238.35 $ 244.002" S0021-X-0300 $ 523.95 $ 260.00
Strainers supplied with FNPT t apped retainer cap for blow off outlet.Strainers supplied with PTFE cap seal. Optional graphite list price cap sealadder: $15.00 Many different types of configurations available.
STRAINER- Unleaded Bronze body, 20 mesh stainless steelstrainer. Furnished with clean out plug.
Pressure Max: 200 PSI WOG
SIZE PART NO. WGT. LIST PRICE Threaded3/8" 8711E .5 $ 32.001/2" 8712E .3 $ 35.003/4" 8713E 2 $ 55.001" 8714E 4 $ 63.00
11/4" 87142E 5 $ 112.00
11/2" 87143E 6 $ 145.002" 87144E 9 $ 250.00
21/2"* 87145* 15 $ 267.003"* 87146* 25 $ 340.004"* 87147* 95 $ 610.006"* 87148* 185 $ 987.008"* 87149* 299 $ 1,840.00
* Cast iron and flanged connection.
www.flomatic.com
FOOTVALVES&STRAIN
ERS800.83
3.2040
6SE STRAINER- Unleaded bronze body with threaded femaleconnection. Stainless steel strainer with unleaded bronze. Stainlesssteel or plastic caps.
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1/2" 4399E .1 10 $ 29.003/4" 4300E .2 100 $ 32.001" 4301E .6 49 $ 37.00
11/4"* 4302E * .6 36 $ 39.00
11/2"* 4303E * 1.2 25 $ 55.002"* 4304E * 2.4 16 $ 99.0021/2" 4305E 3 $ 262.003" 4306E 7.2 $ 379.004" 4307E 14 $ 740.00
* End caps on strainer are plastic.
6SE STRAINER Discount CodeA
6SS STRAINER- All 303 stainless steel body with threadedfemale connection. Stainless steel strainer with stainless steel orplastic caps.
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4371SS .6 49 $ 52.0011/4" 4372SS .6 36 $ 62.00
6SS STRAINER Discount CodeA
STRAINERS Discount CodeC
-
8/11/2019 2014 Price List.pdf
25/4021
Rugged Dependability
Model C, full port globe style
Model CF, reduced cavitation configuration
Model CA, angle styleAlways with these standard features...
Fusion Epoxy coating internal & external
Copper tubing (ss optional)
Control tubing shutoff valves
Gauge cocks
Valve Trim Unleaded Bronze (114''10'') orStainless Steel (12''& up)
Body drain plugs
EZ off Jack screw covers & seat ringsCan be equipped with these popular options
Dual power chamber
Built-In check feature
Unleaded Pilots or Stainless Steel
Electronic controls
New optional SS-trim
Model CA Angle body globe style
(flanged or threaded)
Model CF Reduced port globe style
(flanged or threaded)
Model C Full port globe style
(flanged or threaded)
Pressure Reducing Valve Modulating Altitude Valve Non-Modulating Altitude Valve
Back Pressure Sustaining Valve Pressure Relief Valve Surge Arrestor Valve Pump Control Valve Pilot Operated Float Valve Solenoid Control Valve Flow Control Hydraulic Check Valve
CHECK THESE
FEATURES...
SEVERAL
DIFFERENT
SERIES...
4 Different Body Configurations.
www.flomatic.com High Quality Valves Built to Last.
Up to 36''
-
8/11/2019 2014 Price List.pdf
26/40
BACK PRESSURE SUSTAINING VALVE - Sustains aminimum upstream pressure to prevent overdrafting the supply.
11/4" $1,316
11/2" $1,325 $ 1,559 $ 1,6082" $1,355 $ 1,587 $ 1,66121/2" $1,685 $ 1,743 $ 1,803 $ 1,9243" $ 1,939 $ 1,947 $ 2,0374" $ 2,043 $ 2,638 $ 2,815
6" $ 2,843 $ 3,867 $ 4,1548" $ 4,468 $ 6,325 $ 6,85510 $ 6,572 $ 8,740 $ 9,51312" $ 10,970 $ 14,233 $ 14,81314" $ 14,607 $ POA $ POA16 POA $ 23,176 $ POA18" POA $ POA $ POA20" $ 27,980 $ POA $ POA
* Reduced cavitation configuration.
22
C301/CA301 Discount CodeB
C101 THREADED/CF101/C101/CA101 C103/CA103 Discount CodeBDiscount CodeB
PRESSURE REDUCING VALVE WITH CHECK - Reduces
high upstream pressure to lower downstream pressure.
11/2" $2,330 $2,200 $2,4652"21/2"3"4"6"8"10"12"6"8"10"
12"
*Reduced cavitation configuration.
NON-MODULATING ALTITUDE VALVE - Single Acting.Level control of storage tanks, reservoirs, and basins..
SIZE THREADED C/CA C/CACF MODEL* C FLANGED C FLANGED
150# 150# 300#
*Reduced cavitation configuration.
C205/CA205 Discount Code B
C/CA C/CASIZE THREADED CF MODEL* C FLANGED C FLANGED
150# 150# 300#
SIZE C THREADED LIST PRICE CF FLANGED LIST PRICE150# 150#
11/2"
3"
4"
6"
8"
10"
12"
14"16"
18"
20"
*Reduced cavitation configuration.
SIZE C/CAC THREADED
LIST PRICE LIST PRICECF FLANGED*150#
11/4"
21/2"
2"
PRESSURE REDUCING VALVE - Reduces high upstream pressure to lower downstream pressure.
SIZE LIST PRICE LIST PRICEC/CAC FLANGED
150#
C/CAC FLANGED
300#
High Quality Valves Built to Last... www.flomatic.com
CONTROL
VALVES800
.833.2040
11/2"2"21/2"3"4"6"8"10"1214161820
11/2" $ 3,214 $ 3,446 $ 3,6872" $ 3,542 $ 3,627 $ 3,88121/2" $ 3,836 $ 3,605 $ 4,015 $ 4,2963" $ 3,729 $ 4,065 $ 4,3494" $ 4,395 $ 4,755 $ 5,0886" $ 4,946 $ 5,886 $ 6,2988" $ 6,325 $ 8,462 $ 9,05410" $ 8,545 $ 9,335 $ 9,98812" $ 12,967 $14,193 $15,18614" $ 16,101 POA POA1