2014 new Products Brochure 082014--... · King Crimp Style Ferrules Hose ID Hose OD Carbon Steel...
Transcript of 2014 new Products Brochure 082014--... · King Crimp Style Ferrules Hose ID Hose OD Carbon Steel...
New Product Supplement tothe DGCL2014 Catalogue
2014
MA
NU
F AC
TUR
ING
• Q
UA
LITY
• SE
RVI
CE
• MA
NU
FAC
TUR
ING
• Q
UA
LITY
• SE
RVI
CE
• MA
NU
FAC
TUR
ING
• Q
UA
LITY
• SE
RVI
CE
• MA
NU
FAC
TUR
IN
877.963.4966Customer Service:dixongroupcanada.com •
®
King Crimp Style Short Frac Ferrules
Carbon SteelThicknessTo Part #
CFS800-1CSCFS800-2CSCFS800-3CSCFS800-4CSCFS800-5CSCFS800-6CSCFS800-7CSCFS800-8CS
Features:•• see page 19 of the DGCL2014 catalogue and stems
Carbon Steel Sleeve Sleeve
Thickness
Sleeve
Part #S830X875X120CSS838X600X120CSS850X650X120CSS875X600X120CSS898X875X120CSS900X400X090CSS900X400X120CSS900X600X120CSS910X400X120CSS912X600X120CSS915X600X120CSS925X600X120CSS925X400X120CSS950X400X120CSS950X600X120CSS975X600X120CSS1025X750X120CSS1050X750X120CSS1100X600X120CSS1175X600X120CS
•
King Crimp Style Sleeves
King Crimp Fittings
see page 19 of the DGCL2014 catalogue sleeve and stems
1 DGCL2014NPS877.963.4966 - dixongroupcanada.com
TTMA Flange x King Crimp Style King Combination Nipples
Carbon SteelPart #
TTFST35CSTTFST40CS
Feature:•
King Crimp Style Nipples for Lap Joint Flanges
Plated Carbon Steel 316 SSPart # Part #N25CS RN25CSN35CS RN35CSN40CS RN40CSN60CS RN60CS
Feature:•
King Crimp Fittings
• see page 891 of the DGCL2014 catalogue Lap Joint Flanges
• see page 4 Crimp Ferrules
• see pages 3 & 4 for crimp ferrules.
King Crimp Sanitary StemsFeatures:• used with Dixon King Crimp ferrules as shown on pages 3 & 4.• wetted surfaces meet governmental and independent regulatory standards
Hose ID316 Stainless Steel
Part #1" CSSR100CS
1½" CSSR150CS2" CSSR200CS3" CSSR300CS4" CSSR400CS
DGCL2014NPS 877.963.4966 - dixongroupcanada.com 2
King Crimp Fittings
King Crimp Style Ferrules
HoseID
Hose OD Carbon Steel 304 Stainless Steel Work. PressureFerrule
IDFerrule
WallThickness
FerruleOverallLengthFrom To Part # Part # 1
KC2
1"
1 13/64 1 16/64 CF100-1CS CF100-1SS 250 400 1.313 .062 2-13/16"1 17/64 1 20/64 CF100-2CS CF100-2SS 250 400 1.375 .062 2-13/16"1 21/64 1 24/64 CF100-3CS CF100-3SS 250 400 1.438 .062 2-13/16"1 25/64 1 28/64 CF100-4CS CF100-4SS 250 400 1.500 .062 2-13/16"1 29/64 1 32/64 CF100-5CS CF100-5SS 250 400 1.563 .062 2-13/16"1 33/64 1 36/64 CF100-6CS CF100-6SS 250 400 1.625 .062 2-13/16"1 37/64 1 40/64 CF100-7CS CF100-7SS 250 400 1.688 .062 2-13/16"1 41/64 1 44/64 CF100-8CS CF100-8SS 250 400 1.750 .062 2-13/16"1 45/64 1 48/64 CF100-9CS CF100-9SS 250 400 1.813 .062 2-13/16"1 49/64 1 52/64 CF100-10CS CF100-10SS 250 400 1.875 .062 2-13/16"
1½"
1 41/64 1 44/64 CF150-1CS CF150-1SS 250 350 1.750 .062 2-13/16"1 45/64 1 48/64 CF150-2CS CF150-2SS 250 350 1.813 .062 2-13/16"1 49/64 1 52/64 CF150-3CS CF150-3SS 250 350 1.875 .062 2-13/16"1 53/64 1 56/64 CF150-4CS CF150-4SS 250 350 1.938 .062 2-13/16"1 57/64 1 60/64 CF150-5CS CF150-5SS 250 350 2.000 .062 2-13/16"1 61/64 2 CF150-6CS CF150-6SS 250 350 2.063 .062 2-13/16"2 1/64 2 4/64 CF150-7CS CF150-7SS 250 350 2.125 .062 2-13/16"2 5/64 2 8/64 CF150-8CS CF150-8SS 250 350 2.188 .062 2-13/16"2 9/64 2 12/64 CF150-9CS CF150-9SS 250 350 2.250 .062 2-13/16"2 13/64 2 16/64 CF150-10CS CF150-10SS 250 350 2.313 .062 2-13/16"2 17/64 2 20/64 CF150-11CS CF150-11SS 250 350 2.375 .062 2-13/16"2 21/64 2 24/64 CF150-12CS CF150-12SS 250 350 2.438 .062 2-13/16"
2"
2 13/64 2 16/64 CF200-1CS CF200-1SS 250 300 2.313 .062 3-1/8"2 17/64 2 20/64 CF200-2CS CF200-2SS 250 300 2.375 .062 3-1/8"2 21/64 2 24/64 CF200-3CS CF200-3SS 250 300 2.438 .062 3-1/8"2 25/64 2 28/64 CF200-4CS CF200-4SS 250 300 2.500 .062 3-1/8"2 29/64 2 32/64 CF200-5CS CF200-5SS 250 300 2.563 .062 3-1/8"2 33/64 2 36/64 CF200-6CS CF200-6SS 250 300 2.625 .062 3-1/8"2 37/64 2 40/64 CF200-7CS CF200-7SS 250 300 2.688 .062 3-1/8"2 41/64 2 44/64 CF200-8CS CF200-8SS 250 300 2.750 .062 3-1/8"2 45/64 2 48/64 CF200-9CS CF200-9SS 250 300 2.813 .062 3-1/8"2 49/64 2 52/64 CF200-10CS CF200-10SS 250 300 2.875 .062 3-1/8"2 53/64 2 56/64 CF200-11CS CF200-11SS 250 300 2.938 .062 3-1/8"2 57/64 2 60/64 CF200-12CS CF200-12SS 250 300 3.000 .062 3-1/8"
Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other
pages 1190-1195 of the DGCL2014 catalogue.
* consult Dixon for pressure rating1 based on using crimp cam and groove shanks2 based on using King combination nipples
DGCL2014NPS3 877.963.4966 - dixongroupcanada.com
King Crimp Style Ferrules
HoseID
Hose OD Carbon Steel 304 Stainless Steel Work. PressureFerrule
IDFerrule
WallThickness
FerruleOverallLengthFrom To Part # Part # 1
KC2
3"
3 13/64 3 16/64 CF300-1CS CF300-1SS 150 300 3.313 .090 4"3 17/64 3 20/64 CF300-2CS CF300-2SS 150 300 3.375 .090 4"3 21/64 3 24/64 CF300-3CS CF300-3SS 150 300 3.438 .090 4"3 25/64 3 28/64 CF300-4CS CF300-4SS 150 300 3.500 .090 4"3 29/64 3 32/64 CF300-5CS CF300-5SS 150 300 3.563 .090 4"3 33/64 3 36/64 CF300-6CS CF300-6SS 150 300 3.625 .090 4"3 37/64 3 40/64 CF300-7CS CF300-7SS 150 300 3.688 .090 4"3 41/64 3 44/64 CF300-8CS CF300-8SS 150 300 3.750 .090 4"3 45/64 3 48/64 CF300-9CS CF300-9SS 150 300 3.813 .090 4"3 49/64 3 52/64 CF300-10CS CF300-10SS 150 300 3.875 .090 4"3 53/64 3 56/64 CF300-11CS CF300-11SS 150 300 3.938 .090 4"3 57/64 3 60/64 CF300-12CS CF300-12SS 150 300 4.000 .090 4"3 61/64 4 CF300-13CS CF300-13SS 150 300 4.063 .090 4"4 1/64 4 4/64 CF300-14CS CF300-14SS 150 300 4.125 .090 4"4 5/64 4 8/64 CF300-15CS CF300-15SS 150 300 4.188 .090 4"4 9/64 4 12/64 CF300-16CS CF300-16SS 150 300 4.250 .090 4"
4"
4 13/64 4 16/64 CF400-1CS CF400-1SS 150 300 4.313 .090 4"4 17/64 4 20/64 CF400-2CS CF400-2SS 150 300 4.375 .090 4"4 21/64 4 24/64 CF400-3CS CF400-3SS 150 300 4.438 .090 4"4 25/64 4 28/64 CF400-4CS CF400-4SS 150 300 4.500 .090 4"4 29/64 4 32/64 CF400-5CS CF400-5SS 150 300 4.563 .090 4"4 33/64 4 36/64 CF400-6CS CF400-6SS 150 300 4.625 .090 4"4 37/64 4 40/64 CF400-7CS CF400-7SS 150 300 4.688 .090 4"4 41/64 4 44/64 CF400-8CS CF400-8SS 150 300 4.750 .090 4"4 45/64 4 48/64 CF400-9CS CF400-9SS 150 300 4.813 .090 4"4 49/64 4 52/64 CF400-10CS CF400-10SS 150 300 4.875 .090 4"4 53/64 4 56/64 CF400-11CS CF400-11SS 150 300 4.938 .090 4"4 57/64 4 60/64 CF400-12CS CF400-12SS 150 300 5.000 .090 4"4 61/64 5 CF400-13CS CF400-13SS 150 300 5.063 .090 4"5 1/64 5 4/64 CF400-14CS CF400-14SS 150 300 5.125 .090 4"5 5/64 5 8/64 CF400-15CS CF400-15SS 150 300 5.188 .090 4"5 9/64 5 12/64 CF400-16CS CF400-16SS 150 300 5.250 .090 4"
Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other
pages 1190-1195 of the DGCL2014 catalogue.
* consult Dixon for pressure rating1 based on using crimp cam and groove shanks2 based on using King combination nipples
DGCL2014NPS
King Crimp Fittings
877.963.4966 - dixongroupcanada.com 4
Dixon One-Piece Frac Fittings
Application:• used in the fast paced transfer of water, chemicals and sand slurry to a hydraulic fracturing
site
Features:• one-piece stem design eliminates the leak path common with two-piece threaded systems•• 400 PSI 1
• 150 PSI• 150 PSI
1
pressure••
excellent test results with the standard King CF400-xxCS
Materials:••
•
Description Part #
male/female assembly HUMF100300CSHUF100300CSHUM100300CSSTC35CS
wing nut HU100300Nmale/female assembly HUMF100400CS
HUF100400CSHUM100400CSSTC40CSHD
wing nut HU100400Nmale/female assembly HUMF100600CS
HUFALL600CSHUM100600CSSTC60CS
wing nut HU100600Nmale/female assembly HUMF100800CS
HUFALL800CSHUM100800CSSTC80CS
wing nut HU100800N
Figure 100
• see pages 15 -20 of the DGCL2014 catalogue crimp sleeves and ferrules
5 DGCL2014NPS877.963.4966 - dixongroupcanada.com
Boss LPS (Low Pressure Systems)
Dixon One-Piece Frac Fittings
Description Part #
male/female assembly HUMF206300CSHUF206300CSHUM206300CSSTC35CS
wing nut HU206300NO238BU
male/female assembly HUMF206400CSHUF206400CSHUM206400CSSTC40CSHD
wing nut HU206400NO347BU
male/female assembly HUMF206600CSHUFALL600CSHUM206600CSSTC60CS
wing nut HU206600NO440BU
male/female assembly HUMF206800CSHUFALL800CSHUM206800CSSTC80CS
wing nut HU206800NO447BU
Figure 206
8" female8" f l
8" male
8" male NPT
Dixon One-Piece Hammer Union NutsFeatures:• long lasting and dependable nut• all nuts are interchangeable with reliable brands• 2,000 PSI•
Material:•
Description Part #HU100300NHU206300NHU100400NHU206400NHU100600NHU206600NHU100800NHU206800N
see pages 15 -20 of the DGCL2014 catalogue crimp sleeves and ferrules
DGCL2014NPS 877.963.4966 - dixongroupcanada.com 6
Boss LPS (Low Pressure Systems)
Dixon Two-Piece Hammer Union Nuts
Description Part #HU200400RNHU100600RNHU200600RNHU100800RNHU200800RN
®
Applications:• replacement for damaged hammer union nuts•
Features:• lug design provides enlarged surface area to hammer• repair nut is pinned and bolted for perfect alignment• nut can be installed on pre-existing hammer union assembly• 2,000 PSI•••
Dixon One-Piece Flange AdaptersApplication:• used in the transfer of water, brine, water-based chemicals, water-based
acids, and • used with two-piece nutFeatures:••• no welds or pipe threads to deteriorate and cause premature leakage• two-piece nut is pinned and bolted for perfect alignment••
Materials:•
•
Material:•
Description Part #
HUF206400FLG
short HUF206400FLG-ST
HUF206400FLG-45
HUM206400FLG
HUM206400FLG-ST
HUM206400FLG-45
HU200400RN
7 DGCL2014NPS877.963.4966 - dixongroupcanada.com
Boss LPS (Low Pressure Systems)
Dixon One-Piece 150# Flange to Weld AdaptersApplication:•
Features:• no welds or pipe threads to deteriorate and cause premature leakage•• formed butt weld provides accurate alignment•
Materials:•
Description Weldable Cast SteelPart #
WA4FL12X750-1WA4FL12X750-2WA4FL12X1050-1WA4FL12X1050-2
1-Hole Pattern 2-Hole Pattern
Hammer Union Caps and Plugs
Application:•
service or in transit to an alternate location
Features:• forged steel construction ensures longevity, reliability, and performance• caps are designed with larger lugs for easier installation and disassembling• cap design includes a threaded bolt hole for attaching chain or cable• plugs are designed with larger handle for easier installation and disassembling• plug design includes a handle hole to attach chain or cable
Material:•
Description Part #hammer union cap HUC207400hammer union plug HUP207400
10½"
cap
plug
cap
DGCL2014NPS 877.963.4966 - dixongroupcanada.com 8
Boss LPS (Low Pressure Systems)
Vent-Lock Cam and Groove Couplings(Safety Cam and Groove)
Type CType A
Application:•
Features:• safety release cam and groove couplings permit the release of static pressure when disconnecting hose assemblies•• rated to 250 PSI 70°F ) (21 C) with standard
Materials:• 316 stainless steel• consult Dixon for availability of other materials
Attachment:• ferrules, sleeves, bands, and other reliable options
316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless SteelType DP
316 Stainless SteelPart # Part # Part # Part # Part #
L100-A-SS L100-C-SS L100-E-SS L100-DC-SS L100-DP-SSL200-A-SS L200-C-SS L200-E-SS L200-DC-SS L200-DP-SS
Type DC Type DP
Railroad Tank Car ConnectionsFeatures:• parts are produced as a welded fabrication• pressure rating is based on the seal of the mating part, see ratings on page 23 of the DGCL2014 catalogue
Dixon x Coupler Tank Car
Male Tank AluminumPart #
400DWX5TC
EZ Boss-Lock x Coupler Tank Car
Male Tank AluminumPart #
AD400ALEZMTC
°
9 DGCL2014NPS877.963.4966 - dixongroupcanada.com
Cam & Groove Fittings
Dry Quick Disconnect CouplersFeatures:• coupler has built-in swivel• stainless steel ball bearings• stainless steel shaft journal embedded in PTFE to eliminate
seizure• riveted piston pin to minimize the risk for failure under extreme
pressure conditions• the protective ring is a specially formulated, weather resistant
and electrically conductive rubber compound
• all wetted parts are stainless steel• stainless steel couplers: rollers are Hastelloy C276 on the
stainless steel shaft• aluminum and brass couplers: rollers are aluminum-bronze on
the stainless steel shaft• Composite (Polyeten PE-HD 300) plugs to provide very good
protection against corrosion and withstand hot and cold environments.
TTMA Flange Body Size AluminumPart #
4" 164 mm DDC400AL164TTMA
see pages 70-72 of the DGCL2014 catalogue additional products•
DGCL2014NPS
Adapters with Abrasion Resistant Inserts
Description400-A-ALINSERT
Part #
400-A-BRINSERT400-A-MIINSERT400-A-SSINSERT
aluminum adapter with insertbrass adapter with insertiron adapter with insertstainless steel adapter with insert
Application:• for extending the life of cam & groove adapters when transferring abbrassive productsFeatures:• abrasion resistance extends life of adaptersMaterials:• insert: UHMW polyethylene• adapters: aluminum, brass, iron, stainless steel
Size:• 4"
877.963.4966 - dixongroupcanada.com 10
Cam & Groove Fittings
Dry Disconnects Fittings
TTMA Flange Screen
TTMA Flange Spacer with ½" Port
Description AluminumPart #
TTFS4AL-FP50
Description Stainless SteelPart #
TTFS4SS
Feature:•
DBA500TADBA500LTADB600TADB600LTADB605LTA
Connection Type Overall height Overall Length
DB500TA DB500LTA DB600TA
DB605LTADB600LTA
Features:• High flow design and the largest mixing chamber in the industry• Thick wall for abrasion resistanceMaterial:• Durable A356 T6 heat treated aluminum
Dixon "Bayco" High Flow Hopper Teesfor Dry Bulk Tankers
877.963.4966 - dixongroupcanada.com11 DGCL2014NPS
Tank Truck Fittings
Features:
4"
VR4040CS-AL VR4040CS-4MNPT
Part # Description
VR4040CS-ALVR4040CS-4MNPTVR4040CSRK1VR4040CSRK2
4" coupler x 4" hose connection, aluminum4" coupler x 4" MNPT connection, aluminumseal repair kitcam arm repair kit
•••••••
4" Vapor CouplerDesigned with a high flow poppet design
and stainless paddle handles for easy coupling.
see page 1074 of the DGCL2014 catalogue additional products•
877.963.4966 - dixongroupcanada.com 12DGCL2014NPS
Tank Truck Fittings
Short Crimp Sleeves
HoseID
Hose OD Carbon Steel SleeveID
SleeveWall
Thickness
SleeveOverallLengthFrom To Part #
1"
1-21/64" 1-24/64" CSS100-3CS 1.438" .062" 1½"1-25/64" 1-28/64" CSS100-4CS 1.500" .062" 1½"1-29/64" 1-32/64" CSS100-5CS 1.563" .062" 1½"1-33/64" 1-36/64" CSS100-6CS 1.625" .062" 1½"1-37/64" 1-40/64" CSS100-7CS 1.688" .062" 1½"1-41-64" 1-44/64" CSS100-8CS 1.750" .062" 1½"
1½"
1-41/64" 1-44/64" CSS150-1CS 1.750" .062" 1¾"1-45/64" 1-48/64" CSS150-2CS 1.813" .062" 1¾"1-49/64" 1-52/64" CSS150-3CS 1.875" .062" 1¾"1-53/64" 1-56/64" CSS150-4CS 1.938" .062" 1¾"1-57/64" 1-60/64" CSS150-5CS 2.000" .062" 1¾"1-61/64" 2" CSS150-6CS 2.063" .062" 1¾"2-1/64" 2-4/64" CSS150-7CS 2.125" .062" 1¾"2-5/64" 2-8/64" CSS150-8CS 2.188" .062" 1¾"2-9/64" 2-12/64" CSS150-9CS 2.250" .062" 1¾"
2"
2-21/64" 2-24/64" CSS200-3CS 2.438" .062" 2"2-25/64" 2-28/64" CSS200-4CS 2.500" .062" 2"2-29/64" 2-32/64" CSS200-5CS 2.563" .062" 2"2-33/64" 2-36/64" CSS200-6CS 2.625" .062" 2"2-37/64" 2-40/64" CSS200-7CS 2.688" .062" 2"2-41/64" 2-44/64" CSS200-8CS 2.750" .062" 2"2-45/64" 2-48/64" CSS200-9CS 2.813" .062" 2"2-49/64" 2-52/64" CSS200-10CS 2.875" .062" 2"2-53/64" 2-56/64" CSS200-11CS 2.938" .062" 2"2-57/64" 2-60/64" CSS200-12CS 3.000" .062" 2"
3"
3-13/64" 3-16/64" CSS300-1CS 3.313" .090"3-17/64" 3-20/64" CSS300-2CS 3.375" .090"3-21/64" 3-24/64" CSS300-3CS 3.438" .090"3-25/64" 3-28/64" CSS300-4CS 3.500" .090"3-29/64" 3-32/64" CSS300-5CS 3.563" .090"3-33/64" 3-36/64" CSS300-6CS 3.625" .090"3-37/64" 3-40/64" CSS300-7CS 3.688" .090"3-41/64" 3-44/64" CSS300-8CS 3.750" .090"3-45/64" 3-48/64" CSS300-9CS 3.813" .090"3-49/64" 3-52/64" CSS300-10CS 3.875" .090"3-53/64" 3-56/64" CSS300-11CS 3.938" .090"3-57/64" 3-60/64" CSS300-12CS 4.000" .090"
4"
4-29/64" 4-32/64" CSS400-5CS 4.563" .090" 3-15/32"4-33/64" 4-36/64" CSS400-6CS 4.625" .090" 3-15/32"4-37/64" 4-40/64" CSS400-7CS 4.688" .090" 3-15/32"4-41/64" 4-44/64" CSS400-8CS 4.750" .090" 3-15/32"4-45/64" 4-48/64" CSS400-9CS 4.813" .090" 3-15/32"4-49/64" 4-52/64" CSS400-10CS 4.875" .090" 3-15/32"4-53/64" 4-56/64" CSS400-11CS 4.938" .090" 3-15/32"4-57/64" 4-60/64" CSS400-12CS 5.000" .090" 3-15/32"
Features:• for use with King Combination Nipples as shown on pages 288-292 of the DGCL2014 catalogue• a reliable alternative to band clamps• not for use with Dixon King Crimp Style Shanks
Shank / Water Fittings
Longer crimp sleeves can be found on page 15 of the DGCL2014 catalogue•
13 DGCL2014NPS877.963.4966 - dixongroupcanada.com
King Safety Whipsock
• used in high pressure applications such as air, water, hydraulic and slurry
• King Safety Whipsocks keep the hose under control in the event of a high-pressure hose assembly failure.
•• be sure the anchoring points are rated for the application• galvanized steel woven stockings extend down the hose to grip securely over a larger area
preventing whip, abrasion and wear• contact Dixon with questions regarding working pressure, available options or custom
Size OD Range Length Max. WorkingPressure PSI
Galvanized SteelPart #
.315" - .5512" 15.75" 5000 KSW06½" .5512" - .7874" 21.65" 3000 KSW08¾" .7874" - 1.181" 25.20" 2000 KSW121" 1.181" - 1.575" 34.25" 1500 KSW16
1¼" 1000 KSW201½" 700 KSW242" 2.362" - 2.756" 51.18" 1300 KSW32
2½" 2.756" - 3.346" 53.15" 800 KSW403" 72.44" 750 KSW48
3½" 72.05" 550 KSW564" 4.724" - 5.512" 86.61" 550 KSW646" 5.512" - 7.087" 250 KSW96
Wilkerson Modular Coalescing Filters
Features:•
particulate contaminants down to 0.01 mg/m3 with minimum pressure drop
• modern design and appearance• light weight•• 4 oz. bowl• maximum operating conditions:
150 PSIG (10.3 bar) and 32°F to 125°F (0°C to 52°C)
Size Flow(SCFM)
With Compact Transparent Bowl and GuardAutomatic Drain Manual Drain
Part # Part #40.0 M18-02A M18-02M44.0 M18-03A M18-03M48.0 M18-04A M18-04M
with guard
5.98
8.00
DPI2.36
1.90
.18" (4.8 mm)I.D. TubeBarb Fitting
• King Safety cables can be found on page 117 of the DGCL2014 catalogue
• Our full selection of modular coalescing filters can be found on page 220 of the DGCL2014 catalogue
DGCL2014NPS 877.963.4966 - dixongroupcanada.com 14
Air Fittings
Wilkerson Modular Coalescing Filters••• 0.5 micron type B and 0.003 micron type D elements are optional• differential pressure indicator changes from green to red with pressure loss
Features:•
particulate contaminants down to 0.01 mg/m3 with minimum pressure drop
• modern design and appearance• light weight•• 6 oz. bowl• maximum operating conditions:
150 PSIG (10.3 bar) and 32°F to 125°F (0°C to 52°C)
with guard
2.90
1.90
6.999.02
DPI
.18" (4.8 mm)I.D. Tube
Wilkerson Combination UnitsFeatures:•
• components integrated into single unit• modern design and appearance• quick disconnect bowl / bowl guard• maximum operating conditions:
- transparent bowl: 150 PSIG (10.3 bar) and 32°F to 125°F(0°C to 52°C)
- metal bowl: 250 PSIG (17.2 bar) and 32°F to 150°F(0°C to 65.5°C)
• 5 micron element• 4.09 oz. bowl/lubricator
Regulator• 0-125 PSI adjusting range• self-relieving
• supplied with gauge•
SCFM ratings at 150 PSIG inlet pressure.
Size Flow(SCFM)
With Transparent Bowl and Guard With Metal Bowl / Sight GaugeManual Drain Manual Drain
Part # Part #150 D18-04M D18-04MMB
with transparent bowl and guard
5.06
10.00
2.53
3.66
6.34
.19" (4 mm) I.D. TubeBarb Fitting
B����em��a�
��earan�e
1.62
Size Flow(SCFM) Automatic Drain Manual Drain
Part # Part #M28-03AM28-04AM28-06A
M28-03MM28-04MM28-06M
82.090.098.0
With Standard Transparent Bowl and Guard
Air Fittings
• Our full selection of modular coalescing filters can be found on page 220 of the DGCL2014 catalogue
• Our full selection of Wilkerson combination units can be found on pages 231-233 of the DGCL2014 catalogue
15 DGCL2014NPS877.963.4966 - dixongroupcanada.com
with metal bowl
Wilkerson Jumbo Combination Units
Features:•
• components integrated into single unit• modern design and appearance• quick disconnect bowl / bowl guard• maximum operating conditions:
- 250 PSIG (17.2 bar) and 32°F to 150°F (0°C to 65.5°C)• 5 micron element• 6.11 oz. bowl/lubricator
Regulator• 0-125 PSI adjusting range• self-relieving
• supplied with gauge•
Size Flow (SCFM)With Metal Bowl and Sight Gauge
Manual DrainPart #
110 D28-04MMB175 D28-06MMB
6.103.05
11.44
4.10
7.34
.19" (4 mm) I.D. TubeBarb Fitting
BowlRemoval
Clearance
2.00
SCFM ratings given at 120 PSIG inlet pressure.
Wilkerson Exhaust
Features:
on top.
one inlet port5 micron elementquick disconnect clamp ring for easy bowl removalmanual drainoperating:maximum pressure: 150 PSIG (10.3 bar)temperature range: 32°F to 125°F (0°C to 52°C)
Size Flow @ 90 PSI Transparent Bowl with GuardPart #
240 SCFM F23-04M
3.83
8.29
6.23
2.06
PRESS
TURN
FRL's are designed for air service only, unless otherwise indicated.
Our full selection of Wilkerson combination units can be found on pages 231-233 of the DGCL2014 catalogue
DGCL2014NPS 877.963.4966 - dixongroupcanada.com 16
Air Fittings
Wilkerson Lockout ValvesApplication:
procedures of pneumatically (air) operated equipment.
Features:• used to comply with OSHA 29 CFR part 1910•• inline or surface mountable• yellow cast aluminum body with red handle• pressure range: 15-300 PSI• temperature range: 40°F to 175°F (4.4°C to 18.6°C)
Port In/Out Port Exhaust Part #LV4N6DLV6N6DLV6NADLV8NAD
Push-On Hose Fittingswith Garden Hose Threads
Lok-On (push-on style) hose only. No hose clamps or ferrules are needed. Push-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
Hose ID GHT Thread Brass Part #½" ¾" 574-0812
¾" 574-1012¾" ¾" 574-1212
Hose ID GHT Thread Brass Part #½" ¾" 575-0808
¾" 575-1010¾" ¾" 575-1212
Hose ID GHT Thread Brass Part #½" ¾" 572-0812
¾" 572-1012¾" ¾" 572-1212
Air Fittings
Our full selection of Brass barbed garden hose fittings can be found on pages 334-336 of the DGCL2014 catalogue
17 DGCL2014NPS877.963.4966 - dixongroupcanada.com
Garden Hose & Washdown Accessories
Quick Weld Ferrules
Features:• 304 stainless construction• just slip onto sanitary OD tube and weld• butt weld is not needed
Breakaway Coupling - ClampApplications:• Minimizes spillage and damage associated with pull away and drive away incidents
Features:•• coupling breaks away with an excessive load• EPDM standard clamp gasket• working pressure: 350 PSI @ 70°F• 13kN break load bolts standard, other break loads available• 316 stainless steel polished to standard <32Ra
• other sizes, gaskets and connections available, contact Dixon
Size316 Stainless Steel
Part #3" SBC-E300CC13
TubeOD
Dimensions 304 Stainless SteelA B C Part #
1" 0.290" 1.005" 0.870" 14QMP-G1001½" 0.199" 1.505" 1.370" 14QMP-G1502" 0.205" 2.005" 1.870" 14QMP-G200
2½" 0.210" 2.505" 2.370" 14QMP-G2503" 0.257" 3.005" 2.870" 14QMP-G3004" 0.235" 4.005" 3.834" 14QMP-G4006" 0.321" 6.005" 5.782" 14QMP-G600
Breakaway Coupling Dimensions
Sanitary Fittings
• Our full selection of sanitary weld ferrules can be found on pages 527-528 of the DGCL2014 catalogue
(21°C)
DGCL2014NPS 877.963.4966 - dixongroupcanada.com 18
Breakaway Coupling - Bevel Seat
Applications:• Minimizes spillage and damage associated with pull away and drive away incidents
Features:•• coupling breaks away with an excessive load• bevel seat connection standard• EPDM standard clamp gasket• working pressure: 350 PSI @ 70°F• 13kN break load bolts standard, other break loads available• 316 stainless steel polished to standard <32Ra
• other sizes, gaskets and connections available, contact Dixon
Size316 Stainless Steel
Part #3" SBC-E300TP13
Breakaway Coupling Dimensions
Unpolished Weld Neck Flanges - B38W
TubeOD
Dimensions Number &DiameterBolt Holes
BoltCircle
316L Stainless Steel
A B C D Part #1" .375" 4.250" 1.000" .500" 4/.625" 3.125" B38W-R100
1½" .375" 5.000" 1.500" .500" 4/.625" 3.875" B38W-R1502" .500" 6.000" 2.000" .625" 4/.750" 4.750" B38W-R200
2½" .500" 7.000" 2.500" .625" 4/.750" 5.500" B38W-R2503" .500" 7.500" 3.000" .625" 4/.750" 6.000" B38W-R3004" .500" 9.000" 4.000" .625" 8/.750" 7.500" B38W-R4006" .500" 11.000" 6.000" .625" 8/.875" 9.500" B38W-R6008" .500" 13.500" 8.000" .625" 8/.875" 11.750" B38W-R800
(21°C)
19 DGCL2014NPS877.963.4966 - dixongroupcanada.com
Sanitary Fittings
Air & Vacuum Relief Tank Vent Valve
Features:
emptying a tank.2" and 3" clamp connections on the same valvedome helps in preventing external contaminationlight weight, robust PVC and 304 stainless steel constructioncan use any clamp gasket
vacuum break: .1 PSIpressure relief: .1 PSI
Dimensions
Assembly Vent Flow Pipes Pressure Analysis
Size 304 Stainless SteelPart #
2" - 3" TVPC200-300
Male Tube x Male 37° JIC
Tube OD Male 37° JIC SteelPart #
¼" ¼" FLC2402-04-04FLC2402-06-06
½" ½" FLC2402-08-08¾" ¾" FLC2402-12-12
Hydraulic Fittings
• Our full selection of hyrdaulic adapters can be found on pages 480-498 of the DGCL2014 catalogue
DGCL2014NPS 877.963.4966 - dixongroupcanada.com 20
Sanitary Fittings
Foot Valve Strainers
Features:•••
Anodized Aluminum
2" NST (NH) N-FTVLST-20F2" NPSH N-FTVLST-20S
Lead Free Brass Ball ValvesFeatures:•
that have a weighted average lead content = 0.25%. Source: California Health & Safety Code (116875). Vermont Act 193*171NLF
•• maximum temperature: 366°F•
Size Brass
½" full LFV50¾" full LFV751" full LFV100
1¼" full LFV1251½" full LFV1502" full LFV200
Fire Fittings
21 DGCL2014NPS877.963.4966 - dixongroupcanada.com
Valves
Dixon Eagle Bellows Seal Valves
Applications:
regulated media.
Features:• all valves 100% tested in the USA••• reduces monitoring costs• three stem seals for safety: metallic bellows, graphite packing, backseat in open position• all valves 100% tested• 5 year bellows warranty•
e-mail [email protected]
Dixon Eagleph: 401.732.0333 • toll free 800.314.9246 • fx: 401.732.2201
entering the process, minimize maintenance and reduce life cycle costs in process plants including steam, cryogenic, heat
Agency.
H & W series gate valves F & G series globe valves L series gate valve
GY series globe valveJ series globe valve
Valves
DGCL2014NPS 877.963.4966 - dixongroupcanada.com 22
Hammer Unions400 Series
Features:•• 4,000 PSI NSCWP•
Forged Steel
4000 HU4002004000 HU4003004000 HU400400
High Density Polyethylene (HDPE) CouplingsApplications:
Features:•• •
Ductile Ironw/ EPDM gasket
Ductile Ironw/ Buna-N gasket
C3 5 ' 4-5/8" 4 HDPE200 HDPE200BU4 " 6 " 4-5/8" 4 HDPE300 HDPE300BU5 " 8" 5-3/4" 4 HDPE400 HDPE400BU7 " 11" 5-7/8" 4 HDPE600 HDPE600BU
CB
A
• Our full selection of Hammer Unions can be found on page 885 of the DGCL2014 catalogue
Reelcraft® Static Discharge ReelsApplications:•
Features:• supplied with a 3/32" OD steel aircraft cable• DC resistance is approximately one ohm per 50' of steel cable
Description Part #single 7" x 7" stranded steel G3050
Swivels & Rack Equipment
23 DGCL2014NPS877.963.4966 - dixongroupcanada.com
Pipe & Welding Fittings
Tank Truck Fittings
HoseID Thread
316 Stainless SteelPart #
½"¾" NPT
BSPT1" NPT
MR0808MR1212MR1212AMR1616
for use with clampsfor crimping
DEF Automatic Shutoff Nozzle
Features:• Automatic shutoff nozzle designed for diesel
• aluminum body double coated inside and out with PTFE baked on at 500°F
BSPPInlet
SpoutOutlet
Weightt(lbs)
Approximate Flow Rate at 20 PSI (GPM) Part #
¾" 13/16" 2½ 14 DEFN075
• stainless steel spout• maximum operating pressure: 50 PSI•• FKM-A seals
Dixon Products for DEF Service
Designed for Diesel Exhaust Fluid applications
Hose Fittings
Thread To Part #
58 2 R8P2SS1 6 1 12 R12P1250
1 12 R12P1250A1 1 1 22 R12P1370
1 22 R12P1370A1 30 1 38 R16P16201 38 1 46 R16P1770
/
3/4"
NPTNPTNPT
BSPTNPT
BSPTNPTNPT
1 6
1 1
316 Stainless Steel
• 316 Stainless steel stem, 304 stainless steel ferrule. Please contact Dixon for Crimp Specifications
Other fitting sizes available, please contact Dixon•
DGCL2014NPS 877.963.4966 - dixongroupcanada.com 24
Torque Wrenches
Micrometer Adjustable C Series Torque Wrenches
Part # DriveRange
LengthIn-Lb Ft-LbC1001 ¼" 20 - 100 --- 11"C2001 ¼" 40 - 200 --- 16"C1002 --- 15 - 100 17"C1503 ½" --- 20 - 150 24"C2503 ½" --- 30 - 250 24"
Features:• 36 tooth quick release ratchet head••
National Institute of Standards Technology (NIST)• accurate to ±3% and ±5% CCW of full scale
Micrometer Adjustable Heavy Duty Industrial Torque Wrenches
Part # Drive RangeFt-Lb Length
C4504 ¾" 50 - 450C6004 ¾" 100 - 600C7504 ¾" 150 - 750C6005 1" 100 - 600C7505 1" 150 - 750
Features:• 24 tooth quick release ratchet head• click type wrench•• precision roll marked scale•• fully repairable and easily calibrated• calibrated to +/-3% at any setting•
Electronic Torque WrenchesFeatures:• 24 tooth quick release ratchet head•••• mode: Peak Hold• torque setting from 5% to 100% of full scale• accuracy torque ±1% both CW and CCW from 10%-100% of Indicate value• 2 AA batteries provide up to 500 hours of continuous use• ISO-6789-2003 and ASME B107-2005 Standard compliant•
Part # DriveRange
LengthIn-Lb Ft-LbDW2501 ¼" 13"DW1002 60 - 1200 5 - 100 18"DW2503 ½" 150 - 3000
Maintenance & Repair
25 DGCL2014NPS877.963.4966 - dixongroupcanada.com
Torque and Angle Meter Pro
Torque and Angle Meters
Torque Meters
Part # DriveRange
Length x WidthIn-Lb Ft-LbSPA502 30 - 600SPA1002 60 - 1200 5 - 100SPA1503 ½" 90 - 1800SPA2503 ½" 150 - 3000SPA4004 ¾" 240 - 4800 20 - 400SPA6004 ¾" 360 - 7200 30 - 600
Features:••••• torque setting from 5% to 100% of full scale• accuracy torque ±1% both CW and CCW from 10% - 100% of Indicate value• accuracy angle: ±1° of reading ±1° from 1° to 360°•• Li-Ion rechargeable battery provides up to 200 hours use per charge• ISO-6789-2003 and ASME B107-28-2005 Standard compliant•
Part # DriveRange
Length x WidthIn-Lb Ft-LbTA502 30 - 600TA1002 60 - 1200 5 - 100TA1503 ½" 90 - 1800TA2503 ½" 150 - 3000
Features:•••• Mode: Peak Hold and Angle• torque setting from 5% to 100% of full scale• accuracy torque ±2% both CW and CCW from 10% - 100% of Indicate value• accuracy angle: ±1° of reading from 1° to 180°•• 3 AAA battery provides up to 200 hours of continuous use• ISO-6789-2003 and ASME B107-28-2005 Standard compliant•
Part # DriveRange
Length x WidthIn-Lb Ft-LbTM502 30 - 600TM1002 60 - 1200 5 - 100TM1503 ½" 90 - 1800TM2503 ½" 150 - 3000
Features:•••• Mode: Peak Hold and Angle• torque setting from 5% to 100% of full scale• accuracy torque ±2% both CW and CCW from 10% - 100% of Indicate value• 3 AAA battery provides up to 400 hours of use per charge• ISO-6789-2003 and ASME B107-28-2005 Standard compliant•
Torque Wrenches
Maintenance & Repair
DGCL2014NPS 877.963.4966 - dixongroupcanada.com 26
Dixon Group Canada Limited
536 Avenue Lepine, Dorval, QC H9P 2V6 Phone: 514-422-9292 • Toll-Free 877-963-4966
Fax: 866-422-0166
2315 Bowman Street, Innisfil, ON L9S 3V7 Phone: 705-436-1125 • Toll-Free 877-963-4966 Fax: 877-436-6251
7011-68 Avenue, Edmonton, AB T6B 3E3 Phone: 780-469-5444 • Toll-Free 877-963-4966 Fax: 877-463-9205
www.dixongroupcanada.com
Through its divisions and affiliated companies, Dixon is recognized as the premier man-
ufacturer and supplier of hose fittings and accessories spanning a wide range of indus-
trial uses. Dixon’s reach includes products for food, dairy processing, beverage and
brewery, mobile tankers, mining, construction, chemical processing, petroleum, oilfields,
refining, nuclear and manufacturing.
Dixon pays strict attention to the values that have formed the core of its suc-
cess for decades: unmatched customer service, quality products, and the core values of
responsibility, respect, caring, citizenship, trust, and fairness.
dixongroupcanada.com
®
DGCL2014NPS Printed in Canada