2014 Kamco Fastener Catalog
-
Upload
kamcosupply -
Category
Documents
-
view
290 -
download
2
description
Transcript of 2014 Kamco Fastener Catalog
L & W Supply is the distributor for the high quality fasteners you’vecome to expect out of Posi-Grip® and Posi-Set® screws. We also sellmany of the tools and other supplies used on the job site every day.
Nationwide StrengthLocal Commitment
L&WSUPPLY
Alexandria, VA5860 Farrington Avenue Alexandria, VA 22304 1-703-823-8700 – phone 1-703-823-9841 – fax
Hampton, VA305 E Street Hampton, VA 23661 1-757-262-0980 – phone 1-757-262-0984 – fax
Washington, DC2100 West Virginia Ave NE Washington, DC 20002 1-202-636-1701 – phone 1-202-832-9611 – fax
Kamco Building Supply Corp is the distributor for the high quality fasteners you’ve come to expect out of Posi-Grip® and Posi-Set® screws. We also sell
many of the tools and other supplies used on the job site every day.
1
Posi-Grip® Screws:
Markets:
Application:
Product:
Solution:
Posi-Set® Screws:
Posi-Fit® Nails:
These screws are internationally recognized as a premier quality fas-tener and are manufactured under strict guidelines in an ISO 9002approved factory. Our sharp point screws meet and exceed ASTM C-1002-93 Standards and our self-drilling screws meet and exceedASTM C-954-86 Standards.
Professional Drywall, General Construction, HVAC & Electrical
For efficiently and cost effectively attaching a wide variety of steel,steel stud, metal & wood decking, standard lumber, cement board &Exterior Insulation Finish Systems (EIFS).
Posi-Grip® Screws: 250 different combinations of size and finish,including: all purpose, hi-thread, deck screws, acoustical lags, trimscrews, ceramic coated, stainless steel, concrete screws, and manyvarieties of specialty self-drilling screws.
Posi-Grip® products provide the end user with: faster work speed,improved cost efficiency and high-level performance and quality.
These standard grade drywall, concrete & tek screws provide our cus-tomers with a consistent quality product at a competitive price thatthey need to complete in today’s marketplace.
These superior quality common nails & collated nails provide ourcustomers with a wide variety of framing, roofing, finishing & staplingoptions that fit most brand name pneumatic tools.
POSI-GRIP®, POSI-SET®, POSI-FIT®
• POSI-GRIP®, POSI-SET®, POSI-FIT® are registered trade names of Star Sales & Distributing Corp. •
®
001Balt 4/17/03 12:04 PM Page 1
Valley Interior is the distributor for the high quality fasteners you’ve come to expect out of Posi-Grip® and Posi-Set® screws. We also sell many of the tools and other supplies used on the job site every day.
Valley Interior Products, Inc350 Hermitage Avenue
Nashville, TN 37210Tel #(615)259-2900
2
DRYWALL SCREWSBugle Head Sharp
Multi-purpose screwused for fastening dry-wall to 20-25 gaugemetal studs. Phil. recess.
• Twin lead point for increased holding and faster penetration.• Available in Black Phosphate or Zinc Coating. (1”-3”)
Approx.Size Part No. Qty./Box Wt./Box
6 x 1 SS100 10 M 31 lbs6 x 1 1/8 SS118 10 M 32 lbs6 x 1 1/4 SS114 8 M 30 lbs6 x 1 5/8 SS158 5 M 24 lbs6 x 2 SS200 3.5 M 21 lbs6 x 2 1/4 SS214 3 M 20 lbs7 x 2 SS200X 3.5 M 23 lbs8 x 2 1/2 SS212 2.5 M 25 lbs8 x 3 SS300 2 M 23 lbs10 x 3 1/2 SS312 1.5 M 27 lbs10 x 3 3/4 SS334 1.5 M 30 lbs10 x 4 SS400 1.5 M 32 lbs10 x 4 1/2 SS412 1 M 36 lbs10 x 5 SS500 1 M 27 lbs10 x 6 SS600 1 M 29 lbs
Coarse Hi ThreadThe most complete line ofcoarse thread drywall screws.Used in many applications,wood to wood, drywall to wood,
cabinet installation, and outdoor wood decks. Phil. recess.• Available in Black Phosphate, Zinc, or Zinc Yellow Dichromate.
Approx.Size Part No. Qty./Box Wt./Box
6 x 1 C100B 10 M 31 lbs6 x 1 1/8 C118B 10 M 32 lbs6 x 1 1/4 C114B 8 M 30 lbs6 x 1 1/2 C112B 6 M 26 lbs6 x 1 5/8 C158B 5 M 24 lbs6 x 2 C200B 3.5 M 21 lbs6 x 2 1/4 C214B 3 M 20 lbs7 x 1 3/4 C134B 4 M 21 lbs7 x 2 C200BX 3.5 M 23 lbs8 x 2 1/2 C212B 2.5 M 25 lbs8x 3 C300B 2 M 23 lbs10 x 3 1/2 C312B 1.5 M 27 lbs10 x 4 C400B 1.5 M 32 lbs
Wafer Lath SharpFor attaching metal lath or k-lathto metal studs 20 to 25 gauge.Zinc finish, Phil. recess.• 9/16 also available in Black
Phosphate.
Approx.Size Part No. Qty./Box Wt./Box
8 x 9/16 W916Z 10 M 33 lbs8 x 3/4 W034Z 8 M 38 lbs8 x 1 W100Z 5 M 26 lbs8 x 1/4 W114Z 5 M 31 lbs8 x 1-5/8 W158Z 4 M 30 lbs8 x 2 W200Z 2.5 M 25 lbs
Laminating Screw
A temporary fastener for attchingdrywal to drywall. Phil. recess.
Approx.Size Part No. Qty./Box Wt./Box
10 x 1/2 L112 5 M 38 lbs
Pan Framing SharpFor attaching steel studs to steel track up to20 gauge.• Serrations under head to prevent spinning.
Approx.Size Part No. Qty./Box Wt./Box
6 x 7/16 SS6716 15 M 35 lbs7 x 7/16 SS7716 15 M 38 lbs
Trim Head SharpFor attaching wood trim andbase to metal studs.• Square drive.
Approx.Size Part No. Qty./Box Wt./Box
6 x 1 TS100 10 M 30 lbs6 x 1 5/8 TS158 5 M 21 lbs6 x 2 1/4 TS214 3 M 20 lbs8 x 3 TS300 2 M 22 lbs
Accoustical Eye Lag ScrewFor hanging tie wire towood beams for acous-tical ceiling and otherapplications.
Approx.Size Part No. Qty./Box Wt./Box
1/4 x 3 LAG300 1 M 26 lbs1/4 x 4 LAG400 1 M 29 lbs1/4 x 5 LAG500 5 C 35 lbs
002Balt 4/16/03 3:39 PM Page 2
Valley Interior is the distributor for the high quality fasteners you’ve come to expect out of Posi-Grip® and Posi-Set® screws. We also sell many of the tools and other supplies used on the job site every day.
Valley Interior Products, Inc350 Hermitage Avenue
Nashville, TN 37210Tel #(615)259-2900
3
DRYWALL SELF DRILLING SCREWSBugle Head Self-Drill
Used for fastening dry-wall to 14-20 gaugemetal studs.• Posi-Grip drill point pro-
vides easier cutting andfaster penetration.
• Available in Black Phosphate or Zinc plated.
Approx.Size Part No. Qty./Box Wt./Box
6 x 1 SD100 10 M 33 lbs6 x 1 1/8 SD118 10 M 34 lbs6 x 1 1/4 SD114 8 M 30 lbs6 x 1 5/8 SD158 5 M 23 lbs6 x 1 7/8 SD178 4 M 27 lbs8 x 2 3/8 SD238 3 M 24 lbs8 x 2 5/8 SD258 2.5 M 24 lbs8 x 3 SD300 2 M 25 lbs10 x 3 1/2 SD312 1 M 18.1 lbs10 x 4 SD400 .5 M 10.3 lbs
Wood Screws/Flat Square Head/Coarse Thread
For cabinet installationand other hard wood towood applications.Square drive creates
more positive driving. Type 17 point. Nibbs under head.• Phillips and square drive.• Black or Zinc finish.
Approx.Size Part No. Qty./Box Wt./Box
8 x 1 CS8100 10 M 38 lbs8 x 1/2 CS8112 6 M 32 lbs8 x 1 3/4 CS8134 4 M 26 lbs8 x 2 CS8200 3.5 M 25 lbs8 x 2 1/4 CS8214 3 M 21 lbs8 x 2 1/2 CS8212 2.5 M 23 lbs8 x 3 CS8300 2 M 24 lbs
Self-Piercing (Slotted) HexWasher Head Needle Point
Used in light metal assembly such aselectrical outlets, framing, and variousother sheet metal applications. Slottedhead. Zinc Plated.
• Extra sharp point for faster penetration.• Twin lead thread makes for easier installation.
Approx.Size Part No. Qty./Box Wt./Box
8 x 1/2 HSS8012 15 M 45 lbs8 x 3/4 HSS8034 10 M 43 lbs8 x 1 HSS8100 7.5 M 37 lbs8 x 1 1/4 HSS8114 6 M 36 lbs8 x 1 1/2 HSS8112 5 M 37 lbs8 x 2 HSS8200 3 M 30 lbs10 x 1/2 HSS10012 14 M 50 lbs10 x 3/4 HSS10034 7.5 M 35 lbs10 x 1 HSS10100 5 M 34 lbs10 x 1 1/2 HSS10112 3 M 35 lbs10 x 2 HSS10200 2 M 35 lbs
Wafer Lath Self-DrillFor attaching metal lath to heavy gauge(14-20) metal studs.• Zinc plated, Phil drive.
Approx.Size Part No. Qty./Box Wt./Box
8 x 1/2 WD012Z 10 M 41 lbs8 x 3/4 WD034Z 8 M 44 lbs8 x 1 WD100Z 5 M 29 lbs8 x 1/4 WD114Z 5 M 34 lbs8 x 5/8 WD158Z 4 M 34 lbs
Cement Board Self-Drill ScrewsFor attachingcement board to14-20 gauge metalstuds. Special
exterior coating provides over 500 salt spray hours.• Self-Drill.• Type “S” point.
Approx.Size Part No. Qty./Box Wt./Box
8 x 1 1/4 DR114 5 M 34 lbs8 x 1 5/8 DR158 4 M 35 lbs8 x 2 1/4 DR214 2 M 22 lbs8 x 1 1/4 SR114 5 M 34 lbs8 x 1 5/8 SR158 4 M 35 lbs
Trim Head Self-DrillUsed for attachingwood trim or base to14-20 gauge metalstuds. Zinc coating.
• Square drive.
Approx.Size Part No. Qty./Box Wt./Box
6 x 1 TSD100Z 10 M 30 lbs6 x 1 5/8 TSD158Z 5 M 22 lbs7 x 2 1/4 TSD7214Z 3 M 19 lbs
003Balt 4/16/03 3:39 PM Page 3
Valley Interior is the distributor for the high quality fasteners you’ve come to expect out of Posi-Grip® and Posi-Set® screws. We also sell many of the tools and other supplies used on the job site every day.
Valley Interior Products, Inc350 Hermitage Avenue
Nashville, TN 37210Tel #(615)259-2900
4
DRYWALL SELF-DRILLINGSCREWS
Pan Framing Self-Drill
For attaching steel track to 14-20 gauge metalstuds.• Available in Black Phosphate or Zinc plated.
Phil Drive.
Approx.Size Part No. Qty./Box Wt./Box
6 x 7/16 SD6716 15 M 35 lbs7 x 7/16 SD7716 15 M 38 lbs10 x 9/16 SD10916 10 M 49 lbs
ALL WEATHER COARSE DECK SCREWS
Dacro CoatedUse in fence, decks, wood sid-ing, gazebos, or any exposedexterior application. *Use stain-less deck screws for cedar andredwood applications.
Approx.Size Part No. Qty./Box Wt./Box
6 x 1 C100D 10 M 31 lbs6 x 1 1/4 C114D 8 M 30 lbs6 x 1 5/8 C158D 5 M 24 lbs6 x 2 C200D 3.5 M 21 lbs8 x 2 1/2 C212D 2.5 M 25 lbs8 x 3 C300D 2 M 23 lbs10 x 3 1/2 C312D 1.5 M 27 lbs10 x 4 C400D 1.5 M 32 lbs
302 Stainless Deck Screws(Square Drive) Type 17 Pt.
For the best possible corrosion resistance use 302 stainlessdeck screws. Large diameter prevents snapping. Square driveprevents stripping of recess and provides superior drivingpower. Especially good for cedar and redwood applicationswhere Dacro coating may cause bleeding.• #2 square drive.
Approx.Size Part No. Qty./Box Wt./Box
8 x 1 1/4 DS114 5 M 28 lbs8 x 1 5/8 DS158 4 M 29 lbs8 x 2 DS200 3 M 25 lbs10 x 2 1/2 DS212 2 M 25 lbs10 x 3 DS300 1.5 M 23 lbs10 x 3 1/2 DS312 1 M 18 lbs10 x 4 DS400 1 M 21 lbs7 x 1 5/8 TS158S 5 M 25 lbs7 x 2 1/4 TS214S 3 M 21 lbs8 x 3 TS300S 2 M 23 lbs
METAL TO WOODFASTENER
Hi-Low ThreadAttaching metal siding towood.• Milled.• Type 17 point.
Approx.Size Part No. Qty./Box Wt./Box
10-16 x 1 TG10100 2.5 M 20 lbs10-16 x 1 1/2 TG10112 2.5 M 26 lbs10-16 x 2 TG10200 2 M 24 lbs10-16 x 2 1/2 TG10212 1.5 M 23 lbs10-16 x 3 TG10300 1 M 17 lbs
• Bugle Head
• Trim Head
• Type 17 point
Ceramic Coated Deck Screws1000 hours salt spray tested.Ceramic coating provides highercorrosion resistance. Squaredrive with Type 17 point to pre-vent wood splits. Silver color.Nibs under head to better lockscrew.
Approx.Size Part No. Qty./Box Wt./Box
6 x 1 1/4 CS114CD 8 M 28 lbs8 x 1 3/4 CS134CD 4 M 27.1 lbs8 x 2 CS200CD 3.5 M 26.3 lbs8 x 2 1/2 CS8212CD 2.5 M 23 lbs8 x 3 CS300CD 2 M 22.2 lbs10 x 3 1/2 CS312CD 1 M 18.1 lbs10 x 4 CS400CD 1 M 19.9 lbs
004Balt 4/16/03 3:40 PM Page 4
Valley Interior is the distributor for the high quality fasteners you’ve come to expect out of Posi-Grip® and Posi-Set® screws. We also sell many of the tools and other supplies used on the job site every day.
Valley Interior Products, Inc350 Hermitage Avenue
Nashville, TN 37210Tel #(615)259-2900
5
SPECIALTY SELF-DRILL SCREWS
Phil Flat Self-Drill With WingsFor attaching wood toheavy gauge metal .
• With shank slot and wings, #4 point.• Zinc plated #3 Phil. Recess.
Approx. Max.Size Part No. Qty./Box Wt./Box Drill Cap.
12-24 x 2 FD12200 2 M 36 lbs .37512-24 x 2 1/2 FD12212 1.5 M 29 lbs .3751/4-20 x 2 3/4 FD14234 1 M 31 lbs .3751/4-20 x 3 FD14300 1 M 34 lbs .3751/4-20 x 3 1/4 FD14314 9 C 30 lbs .3751/4-20 x 3 1/2 FD14312 5 C 19 lbs .3751/4-20 x 3 3/4 FD14334 5 C 21 lbs .375
Thin Wafer Plymetal Self-DrillWith Wings
For attaching plywood to metal.• Wings prevent plywood from
climbing up threads.• Wings bore out and relieve
wood chips before breakingoff at metal.
• Zinc plated #3 point. #2 Phil.Recess.
Approx. Max.Size Part No. Qty./Box Wt./Box Drill Cap.
10-24 x 1-7/6 1024176 4 M 37 lbs .220
Thin Wafer Plymetal Self-DrillFor attaching plywood to metal with.220 max. thickness. Good for flooringand trailer bed applications.• Zinc plated #3 point. #2 Phil. Recess.
Approx. Max.Size Part No. Qty./Box Wt./Box Drill Cap.
10-16 x 3/4 1016034 7 M 42 .22010-24 x 3/4 1024034 7 M 42 .22010-24 x 1 1024100 5 M 34 .220
10-24 x 1 1/4 1024114 3.5 M 31 .22010-24 x 1 1/2 1024112 3 M 31 .220
Approx. Max.Size Part No. Qty./Box Wt./Box Drill Cap.
8 x 3/4 WHD8034Z 7 M 46 lbs .1048 x 1 WHD8100Z 5 M 38 lbs .1048 x 1-1/4 WHD8114Z 4 M 30 lbs .1048 x 1-1/2 WHD8112Z 3.5 M 33 lbs .10410 x 3/4 WHD10034Z 5 M 42 lbs .17910 x 1 WHD10100Z 4 M 39 lbs .17910 x 1-1/4 WHD10114Z 3.5 M 35 lbs .17910 x 1-1/2 WHD10112Z 3 M 36 lbs .17912 x 3/4 WHD12034Z 3.5 M 37 lbs .22012 x 1 WHD12100Z 3 M 35 lbs .220
Approx. Max.Size Part No. Qty./Box Wt./Box Drill Cap.
12 x 1-1/4 WHD12114Z 3 M 44 lbs .22012 x 1-1/2 WHD12112Z 2.5 M 37 lbs .22012 x 2 WHD12200Z 1.5 M 27 lbs .22012 x 3 WHD12300Z 1 M 26 lbs .22014 x 3/4 WHD14034Z 3 M 46 lbs .25014 x 1 WHD14100Z 2.5 M 44 lbs .25014 x 1-1/4 WHD14114Z 2 M 41 lbs .25014 x 1-1/2 WHD14112Z 2 M 46 lbs .25014 x 2 WHD14200Z 1.5 M 42 lbs .25014 x 3 WHD14300Z 1 M 38 lbs .250
METAL BUILDING SCREWSHex Washer Head Self-Drill With Bonded Washer
For attaching light gauge metal, metal siding, flashing, etc. to steel structure. Neoprene bonded sealingwasher keeps out moisture and prevents bleeding.• With preassembled Neoprene bonded sealing washer.• Zinc plated.
Hex Head Self-DrillUse a #4 point formetal to steel appli-cations up to 3/8”thick. #5 point formetal to steel up to1/2” thick.
Approx. Max.Size Part No. Qty./Box Wt./Box Drill Cap.
*12-24 x 7/8 1224078 5 M 48 lbs .37512-24 x 1 1/4 1224114 4 M 48 lbs .50012-24 x 1 1/2 1224112 2 M 26 lbs .50012-24 x 2 1224200 2 M 36 lbs .500
• #4 point* • #5 point* • Zinc plated.
005Balt 4/16/03 3:40 PM Page 5
Valley Interior is the distributor for the high quality fasteners you’ve come to expect out of Posi-Grip® and Posi-Set® screws. We also sell many of the tools and other supplies used on the job site every day.
Valley Interior Products, Inc350 Hermitage Avenue
Nashville, TN 37210Tel #(615)259-2900
6
SELF-DRILL ZINC PLATED SCREWS
410STAINLESS STEEL
SELF-DRILL
Approx. Max.Size Part No. Qty./Box Wt./Box Point No. Drill Cap.
6 x 1/2 HD6012 15 M 42 lbs 2 .1046 x 3/4 HD6034 10 M 35 lbs 2 .1048 x 1/2 HD8012 10 M 33 lbs 2 .1048 x 5/8 HD8058 10 M 37 lbs 2 .1048 x 3/4 HD8034 10 M 43 lbs 2 .1048 x 1 HD8100 7.5 M 38 lbs 2 .1048 x 1-1/4 HD8114 5 M 32 lbs 2 .1048 x 1-1/2 HD8112 5 M 39 lbs 2 .1048 x 2 HD8200 3 M 27 lbs 2 .104
10 x 1/2 HD10012 10 M 49 lbs 2 .11010 x 5/8 HD10058 7.5 M 44 lbs 3 .17910 x 3/4 HD10034 7 M 45 lbs 3 .17910 x 1 HD10100 5 M 37 lbs 3 .17910 x 1-1/4 HD10114 3.5 M 31 lbs 3 .17910 x 1-1/2 HD10112 3 M 33 lbs 3 .17910 x 2 HD10200 2 M 23 lbs 3 .17910 x 3 HD10300 1.5 M 25 lbs 3 .17912 x 3/4 HD12034 5 M 42 lbs 3 .22012 x 1 HD12100 3.5 M 35 lbs 3 .22012 x 1-1/4 HD12114 3.5 M 41 lbs 3 .22012 x 1-1/2 HD12112 2.5 M 33 lbs 3 .22012 x 2 HD12200 2 M 33 lbs 3 .22012 x 2-1/2 HD12212 1 M 21 lbs 3 .22012 x 3 HD12300 1 M 22 lbs 3 .22014 x 3/4 HD14034 3.5 M 43 lbs 3 .25014 x 1 HD14100 2.5 M 30 lbs 3 .25014 x 1-1/4 HD14114 2 M 35 lbs 3 .25014 x 1-1/2 HD14112 2 M 39 lbs 3 .25014 x 2 HD14200 1.5 M 36 lbs 3 .25014 x 2-1/2 HD14212 1 M 28 lbs 3 .25014 x 3 HD14300 1 M 32 lbs 3 .25014 x 4 HD14400 9 C 33 lbs 3 .25014 x 5 HD14500 5 C 28 lbs 3 .250
Approx. Max.Size Part No. Qty./Box Wt./Box Point No. Drill Cap.
6 x 3/8 PD6038 15 M 27 lbs 2 .1046 x 1/2 PD6012 15 M 31 lbs 2 .1046 x 5/8 PD6058 10 M 24 lbs 2 .1046 x 3/4 PB6034 10 M 29 lbs 2 .1046 x 1 PD6100 10 M 35 lbs 2 .1048 x 1/2 PD8012 10 M 32 lbs 2 .1048 x 5/8 PD8058 10 M 35 lbs 2 .1048 x 3/4 PD8034 10 M 38 lbs 2 .1048 x 1 PD8100 7.5 M 37 lbs 2 .1048 x 1-1/4 PD8114 5 M 29 lbs 2 .1048 x 1-1/2 PD8112 5 M 34 lbs 2 .1048 x 2 PD8200 3 M 31 lbs 2 .104
10 x 1/2 PD10012 10 M 45 lbs 2 .11010 x 5/8 PD10058FH 8 M 41 lbs 3 .17910 x 3/4 PD10034 7.5 M 45 lbs 3 .17910 x 1 PD10100 5 M 38 lbs 3 .17910 x 1-1/4 PD10114 3.5 M 32 lbs 3 .17910 x 1-1/2 PD10112 3 M 28 lbs 3 .179
Hex Washer Head Self-Drill Pan Head Self-DrillAttaches back upplates, fixtures,door frames, andlathers channel tostructural studs,and metal decks upto 12 gauge.• Zinc finish.
Attaching steel strapping (bridging) orfurring channel to steel joist.• Zinc finish. Phillips recess.
Screw Min. Min. Avg. Avg.Diameter Tension Tortional Shear Pullout
6 1150 25 840 6708 1575 42 1055 705
2100 6110
2350 651496 786
2800 9212
3250 1002015 842
3850 15014
4275 1682585 910
Specifications apply to most STAR and POSI-GRIP screws.Tested in .16 gauge metal.
SELF-DRILL SCREW SPECIFICATIONS
Hex Washer HeadSelf-Drill
For exterior metal to metal applications thatrequire a high degree of corrosion resistance.
• 410 Stainless Steel• Available with preassembled stainless
Neoprene bonded sealing washer.
Available upon request.
Visit our website:www.starsales.com
006Balt 4/16/03 3:41 PM Page 6
Valley Interior is the distributor for the high quality fasteners you’ve come to expect out of Posi-Grip® and Posi-Set® screws. We also sell many of the tools and other supplies used on the job site every day.
Valley Interior Products, Inc350 Hermitage Avenue
Nashville, TN 37210Tel #(615)259-2900
Nationwide Strength
Local CommitmentL&WSUPPLY
Top Ramset Powder Actuated Tools
VIPER
COBRA
R25
TRACKFAST
T3MAG
Ramset Gas Fastening Tools
Powder Actuated Pins T3 Pins Trackfast Pins
POWDER ACTUATED LOADS
PART # DESCRIPTION BUNDLE SIZE
PT412 4’ PRE-TIED 1 ¼” PIN & ANGLE CLIP 100
PT612 6’ PRE-TIED 1 ¼” PIN & ANGLE CLIP 100
PT812 8’ PRE-TIED 1 ¼” PIN & ANGLE CLIP 100
PT1012 10’ PRE-TIED 1 ¼” PIN & ANGLE CLIP 100
PT1212 12’ PRE-TIED 1 ¼” PIN & ANGLE CLIP 100
The above parts numbers represent 12 gauge wire. 9 and 8 gauge wire are available upon request.
AL-14-3 3” EYE LAG WOOD SCREW 1M/BX AL-14-4 4” EYE LAG WOOD SCREW 1M/BX AL-14-5 5” EYE LAG WOOD SCREW 1M/BX AL-14-3C 3” EYE LAG WOOD SCREW 100/BX AL-14-4C 4” EYE LAG WOOD SCREW 100/BX AL-14-5C 5” EYE LAG WOOD SCREW 100/BX
LAG SD2 2” SELF-DRILLING EYE LAG 1M/BX LAG SD3 3” SELF-DRILLING EYE LAG 1M/BX LAG SD2C 2” SELF-DRILLING EYE LAG 100/BX LAG SD3C 3” SELF-DRILLING EYE LAG 100/BX
4247 4” TOGGLE BOLT
Dewalt DW087K Specifications: • Power Supply 3 "AA" batteries • Self-Leveling Range 5 degrees • Indoor Visibility Range 50 ft • Laser Class II • 3 (AA) batteries for 20+ hours run-time • Kit box
Porter Cable 7800 Specifications: • Power: 120 VAC, 60 HZ • Motor Amps: 3.4 Amp AC Only • Speed: Variable 1,400-2,000 RPM • Pad Size: 8-7/8" • Pad Type: Foam-Backed • Pad Mount: Compression Type • Length: 62
Dewalt DW130V Specifications: • Chuck Size 1/2 " • No Load Speed 0-550 rpm • Max Watts Out 600 W • Gear Reduction Triple
Dewalt DW272 Specifications: • 6.3 Amps • No Load Speed 0-4,000 rpm • Clutch Standard • Torque 81 in-lbs • Max Fastener Size #8
Dewalt DW660 Specifications: • 5.0 Amps • No Load Speed 30,000 rpm • Collet Diameter 1/8, 1/4 " • Adjustable Guide Yes • Spindle Lock
Dewalt DC825KA Specifications: • Voltage: 18V • Drive Size: 1/4" hex shank quick release in • No Load Speed: 0-2,400 RPM • Impacts/Min: 0-2,700 BPM • Max Torque: 1,330 in-lbs (111 ft-lbs) • Tool Length: 5-3/4" • Weight (Tool only): 4.6 lbs Dewalt DW304PK Specifications:
• 10.0 Amps • Strokes/Min 0-2,800 spm • Stroke Length 1-1/8" • Keyless Blade Clamp Lever • 4 Position Blade Clamp • Variable Speed Trigger :
• 15.0 Amps • Spindle Lock • Quick Lock Vise • Wheel Arbor 1" • Wheel Diameter 14 " • Capacity (Round) 4-1/2", (Rectangular) 4-3/4 x 5-1/3" • Horsepower 4.0 HP
Dewalt D28700
Item # Grit Pack Out 100012-240 Fine (100) 24 sponges/box (10 boxes/ctn) 100012-250 Fine (100) 250 sponges bulk 100029-240 Medium (60) 24 sponges/box (10 boxes/ctn) 100029-250 Medium (60) 250 sponges bulk 100036-240 Coarse (36) 24 sponges/box (10 boxes/ctn) 100036-250 Coarse (36) 250 sponges bulk
366012-240 Med/Coarse 24 sponges/box (10 boxes/ctn) 366012-250 Med/Coarse 250 sponges bulk 601007-240 Med/Fine 24 sponges/box (10 boxes/ctn) 601007-250 Med/Fine 250 sponges bulk
500010-240 Fine + (120) 24 sponges/box (10 boxes/ctn) 500010-250 Fine + (120) 250 sponges bulk 500027-240 Medium (60) 24 sponges/box (10 boxes/ctn) 500027-250 Medium (60) 250 sponges bulk
400013-240 Fine (100) 24 sponges/box (10 boxes/ctn) 400013-250 Fine (100) 250 sponges bulk 400020-240 Medium (60) 24 sponges/box (10 boxes/ctn) 400020-250 Medium (60) 250 sponges bulk 400037-240 Med/Fine (60/100) 24 sponges/box (10 boxes/ctn) 400037-250 Med/Fine (60/100) 250 sponges bulk
Standard Block - 2 5/8" x 3 7/8"
Z-Foam - 2 5/8" x 3 7/8"
Single Slant Block - 3" x 5"
Double Slant - 3" x 5"
Sanding Solutions For The Advanced Drywall Professional
Nationwide StrengthLocal Commitment
L&WSUPPLY
Alexandria, VA5860 Farrington Avenue Alexandria, VA 22304 1-703-823-8700 – phone 1-703-823-9841 – fax
Hampton, VA305 E Street Hampton, VA 23661 1-757-262-0980 – phone 1-757-262-0984 – fax
Washington, DC2100 West Virginia Ave NE Washington, DC 20002 1-202-636-1701 – phone 1-202-832-9611 – fax
www.kamcosupply.com