2014 Dropsafe Catalogue
-
Upload
hamzadarbar -
Category
Documents
-
view
214 -
download
0
Transcript of 2014 Dropsafe Catalogue
-
8/10/2019 2014 Dropsafe Catalogue
1/15
-
8/10/2019 2014 Dropsafe Catalogue
2/15
In the offshore Oil & Gas industry, approximately 88% of dropped objects are equipment
parts or unsecured objects. 42% of dropped objects are due to failed fixtures and fittings
or inadequate securing.
- Source: Dropped Object Prevention Scheme, www.dropsonline.com
DropsafeNet 5
DropsafePouch 9
DropsafeBarrier 11
How to Order 14
Contents
-
8/10/2019 2014 Dropsafe Catalogue
3/15
Dropsafehas pioneered Oil & Gas Industry adopted safety solutions for securing overhead fixtures like lights,
speakers, CCTV cameras and other items located or used at height on Oil & Gas facilities.
Dropsafeproducts are safety devices designed to prevent a DROPS situation. This is where items, equipment
or fixtures at height come loose and fall because of wear, fatigue, corrosion, poor maintenance, human error,
vibration, impact or being poorly secured. This situation may then result in the injury or death of any personnel in
or near the impact zone, or damage of equipment with further consequences, with severe negative implications
to personnel and facility stakeholders.
Since 1997, we have been designing innovative and award winning mesh-safety and mesh-security solutions
for customers worldwide. We work in partnership with HSE professionals and Asset Managers in the Oil & Gas
Industry to provide unique and effective solutions to enhance workplace safety.
About Us
DropsafeProduct Range
DropsafeNet
DropsafeNets are safety nets that enclose and tether fixtures to prevent DROPS situations.
DropsafeNets are designed for use in any area where overhead fixtures are located posing
a potential DROPS hazard, especially high-risk structures such as derricks and crane
booms.
DropsafePouch
DropsafePouches are safety devices that are attached to the user, designed to securely
enclose and tether two-way radios, gas detectors, multimeters, aerosol cans and other
items used at height.
DropsafeBarrier
Dropsafe
Barriers are mesh panels designed as Safety Barriers to reduce DROPS hazardsor Security Barriers to prevent unauthorised access. Safety Barriers can be installed along
side & under stairwells and along walkways to prevent items falling. Security Barriers can be
installed inside jack-up rig legs to prevent unauthorised access.
Custom Designs
We make mesh panels in custom sizes and wire diameters to meet a variety of requirements
from helideck perimeter netting to securing aging ventilation ducting systems on vessels still
in service. Custom design panels can be supplied with adjustable perimeter securing cables
to facilitate installations.
-
8/10/2019 2014 Dropsafe Catalogue
4/15
DROPSAFENET ON OVERHEAD
FLOODLIGHT FIXTURE
-
8/10/2019 2014 Dropsafe Catalogue
5/15
The patented DropsafeNets are secondary retention safety devices that enclose and tether overhead fixtures
(e.g. lights, beacons, speakers, self-retracting lifelines, CCTV cameras, anodes, pipe clamps) located above
personnel or important equipment.
The products are specifically designed and tested to reduce the risk of a DROPS situation. This is where items,
equipment or fixtures at height come loose and fall because of wear, fatigue, corrosion, poor maintenance,
human error, vibration, impact or being poorly secured. This situation may then result in the injury or death of
any personnel in or near the impact zone, or damage to equipment with further consequences.
How the DropsafeNet works
The DropsafeNet fully encloses the item being secured, preventing both the item and fixture components
to become a DROPS hazard. The integrated securing cable attaches around a structural attachment point to
retain and tether both the item and if applicable the fixture mounting bracket.
Fixtures located above personnel
Fixtures on mobile equipment (e.g. crane booms)
Fixtures in potential impact zones of mobile equipment
Fixtures and mountings prone to vibration, wear and fatigue
Fixtures prone to internal or external corrosion
Fixtures located above important or expensive equipment
Fixtures located in areas difficult to access for maintenance or inspection
Where to use DropsafeNets
DropsafeNet
-
8/10/2019 2014 Dropsafe Catalogue
6/15
DropsafeNet Key Benefits
Provides an instant safety solution for your personnel
Readily enhances any dropped object prevention system or similar
Easy to install, no tools required
Full traceability
Fully encloses and tethers fixture being secured
Retains loose or dislodged items
Safer handling for fixture maintenance and change out of fixture
Products are designed and tested to over five times (5X) the product Safe Working Load (SWL)
Maximum SWL up to 50 kg (110 lbs) for large products
Withstands extreme high temperatures up to 500C (932F)
Withstands extreme low temperatures down to -40C (-40F)
Able to retain most fixture mounting brackets (if SWL not exceeded)
SUS/AISI 316 stainless wire and components
Available in different sizes (custom designs also available)
DropsafeNet Specifications
- Tim Marsh (Director of QHSE-APR, Seadrill)
The introduction of the DropsafeNet has provided us with a significantly improved safety tool for
our Dropped Object Prevention Program in our offshore workplaces. The provision of adequate secondary
retention of fixtures at height was a critical short-coming in ours and in many other offshore environments,
a problem now only effectively addressed through the innovation and introduction of this piece of safety
equipment. This product has met our key requirements in that it allows a dramatic improvement in the
safety of our workplaces, it positively enhances our Dropped Object Prevention Program and in doing
so, contributes to our overall safety performance, as measured by ourselves and more significantly by our
clients.
-
8/10/2019 2014 Dropsafe Catalogue
7/15
Fixture Types
DropsafeNets are designed and tested to fit a variety of fixture types. Some examples are illustrated below.
Speakers / Horns
Pipe Clamps Anodes
Junction Boxes, Heat,
Smoke and CO2
Detector
Flood Lights
CCTV Cameras
Fluorescent Lights
Self-Retracting Lifelines
Nav / Strobe Lights
-
8/10/2019 2014 Dropsafe Catalogue
8/15
-
8/10/2019 2014 Dropsafe Catalogue
9/15
Where to use the DropsafePouch
All areas where work or access is required at height and where single hand use of a item is required and there
is risk of dropping, damaging or losing an item.
DropsafePouch Key Benefits
DropsafePouches are safety devices designed to secure two-way radios, portable gas detectors, aerosol
spray cans, multimeters and other items used while working at height. The DropsafePouch fully encloses the
item being secured and tethers the item to the user preventing it from becoming a DROPS hazard.
Instant Safety Solution (no tools required)
Provides a 5:1 Safety Factor
Fully captures and tethers item being secured
Heavy duty belt clip allows versatile use of item being secured
Products are designed and tested to over five times (5X) the product Safe Working Load (SWL)
TPU coated wires and POM coated mesh joining clips
Safety carabiner with spring secured gate nut
Available in different sizes to fit a variety of items
SUS/AISI 316 stainless wire and components
DropsafePouch Specifications
DropsafePouch
-
8/10/2019 2014 Dropsafe Catalogue
10/15
DROPSAFEBARRIER FOR BOTH
ACCESS AND DROPS PREVENTION
Security Barriers Inside Jack-Up Legs
Around Walkways at Height
Along Safety Barriers
Helipad Fall Prevention Barriers
-
8/10/2019 2014 Dropsafe Catalogue
11/15
How the DropsafeBarrier works
DropsafeBarriers are mesh panels which securely attach to railings around walkways and stairwells or the
internal perimeter structure of a jack-up leg. The barriers fill the open spaces preventing access from below or
fall protection from above.
Safety Barrier
DropsafeSafety Barriers are mesh panels designed to prevent DROPS situations, and to assist containing
loose items to a particular area or deck level. Safety barriers can be installed along side & under stairwells,
along walkways and to railings around deck openings to prevent items falling from height - considerably
improving safety on the facility. DropsafeBarriers can be installed and used during maintenance periods or as
permanent installations during normal operations.
Security Barrier
DropsafeSecurity Barriers are designed to prevent unauthorised access, the large mesh panels are installed
horizontally, at deck level of jack-up rig legs to prevent unauthorised access from below. Having this deck level
barrier in place also helps contain loose items that may fall into the area of the jack up leg opening.
DropsafeBarrier Key Benefits
Provides an instant safety solution for your personnel
DROPS Prevention
Readily enhances your DROPS prevention program
Access Prevention
Products are designed and tested to over five times (5X) the product Safe Working Load (SWL)
Withstands extreme high temperatures up to 500C (932F)
Withstands extreme low temperatures -40C (-40F)
SUS/AISI 316 stainless steel wire and components
Available in different sizes (custom designs also available)
DropsafeBarrier Specifications
DropsafeBarrier
-
8/10/2019 2014 Dropsafe Catalogue
12/15
Prevents Potentially Serious Incident During Crane OperationsThe crane operator and signaler were assigned to install a platform for covering the BOP gantry crane rail.Whilst the operator was lifting the platform from the riser deck to the drill oor, the platform swung during
landing, hitting the light xtures support above the drill oor. As a result, the light support was broken but wasprotected by a DROPSAFENET.
Provides a 5:1 Safety
FactorInstant Safety Solution
(no tools required)
SUS/AISI 316
Dropsafe
The Industrys most widely adopted DROPS prevention solution for overhead xtures
-
8/10/2019 2014 Dropsafe Catalogue
13/15
Notes
-
8/10/2019 2014 Dropsafe Catalogue
14/15
Side-mounted:
Bracket mounted on side of fixture
Rear-mounted:
Bracket mounted on rear of fixture
Use the Product Guide to find a matching DropsafeProduct for the fixture / item you want to secure.
How to Order if you can match a DropsafeProduct
DropsafeNet
To match a DropsafeNet model the following criteria must be met:
1. One sideof fixture does not exceed the measurements of the reference fixture by more than 15%
2. Two sidesof fixture do not exceed the measurements of the reference fixture by more than 10%
3. Fixture weight does not exceed the stated product Safe Working Load (SWL)
4. Fixture must have same side- or rear-mounted configuration(see example below)
DropsafePouch
To match a DropsafePouch model the following criteria must be met:
1. Item to be secured meets the minimum circumference requirements of Pouch model
2. Item to be secured does not exceed the maximum length of Pouch model
If you can find a matching product please complete the Data Collection Sheet A and email to [email protected].
How to Order if you cannot match a DropsafeProduct
DropsafeNet
If you cannot find a matching DropsafeNet provide the following and email to [email protected]:
1. Completed Data Collection Sheet B
2. One or more image(s) of the fixture you want to secure
DropsafePouch
If you cannot find a matching DropsafePouch for the item you want to secure provide us with the following
information:
1. Item type, make and model 4. Item image(s)
2. Item dimensions 5. Any special requirements
3. Item weight 6. Quantity required
How to Order DropsafeProducts
-
8/10/2019 2014 Dropsafe Catalogue
15/15
Newmar Limited
15A, Cheung Fat Industrial Building
No. 7-9 Hill Road, Shek Tong Tsui
Hong Kong
T : + 852 3664 8350
F : + 852 2572 [email protected]
MEMBER OF
Dropsafe is a trademark licensed to Newmar Ltd., registered in U.S., Europe (Community
trademark), China and other countries.
Patented in: U.S. 8,714,308; China ZL201120015015.7; Singapore pub. n169926. Additional
patents pending.
Enhancing Overhead Safety
Drops Prevention Devices