2013 promo 19

#19

Super high-output

$679.95

725 ft. lbs.

CORDLESS INFINIUM 18V 1/2" IMPACT KIT

univerSal battery charger

variable-Speed trigger

led light

{

23.0ah 18v lithium-ion battery

break away from the air hose

September 14 – October 6, 2013

pr 12, 16, 20

batteries included

Kit includes: 1/2" impact wrench Universal charger (2) Lithium batteries Blow-mold case

will charge all Matco 18V, 14V, 12V, and 10.8V Infinium cordless tools

with one-hand forward/reverse switch

Convenient, trigger-activated LED light illuminates work area

drive-train engineered with one of the best power-to-weight ratio of any 1/2" cordless impact

when a bolt is tightened to 725 ft. lbs. from a torque wrench,

the mcl18lWvS can back it offof breakaway

torque

"I didn't think that a battery powered product could have enough torque to remove lug nuts and last all day. A full

charge actually lasted a few days. absolutely love not being constantly tethered to an air hose"

mcl18iWvSKb2

October is fall car care month!

to help you winterize your customers' cars

Get fall-time tools

(use with any Matco Infinium 18V tool)

Save $35

$605.95

$649.95$433.50

34.5"

39.4"

21.2"

2 www.matcotools.com

$708.95

fall

mSc4bK - blacK

mSc4Sb - Stealth blacK (flat finish)

mSc4Sva - Silver vein

6mSc4ti - titanium

HEAVY DUTY sERViCE CaRts

mSc4bl - blue

mSc4r - red

S9GRFM16

16 piece 90 tooth FleX combo metric Set ∙ Loosen or tighten any 6pt, 12pt, spline, TORX, square and even up to 50% rounded off fasteners

∙ 90 tooth head ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 4° swing arc

∙ Includes sizes: 8-19mm, 21mm, 22mm, 24mm, 25mm

MT2234

3/4" impact Wrench ∙ 1,800 ft. lbs. of breakaway torque, 1,200 ft. lbs. of maximum working torque and working torque of 100 - 1,000 ft. lbs.

∙ Quiet at 97 dBA ∙ Variable speed control with 3 stage power regulator dial behind trigger

∙ Lightweight at only 6.8 lbs.

SPL25KA2

25 piece maSter punch and chiSel Set ∙ 7 cold chisels from 5/16" to 7/8" ∙ 6 pin punches from 3/32" to 5/16" ∙ 6 starter punches from 3/32" to 1/4" ∙ 3/16" and 5/16" center punches ∙ 4 specialty punches and chisels ∙ Includes sizes: 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 7"

4 DRAwERS wITH RECESSED HANDLES and full extension roller bearing slides. includes drawer and tray liners for all surfaces.

FOUR 5" x 2" CASTERS with 2 locking and 2 non-locking

FOUR bUMPERS help prevent dents and dings

2 gAS PISTONS that serve as a lid stay as well as raising the cart lid when unlocked

TOTAL NET LOAD 500 LbS. top tray under lid: 5" deep Rows 1: 3" depth Row 2: 4" deep Row 3: 5" deep Bottom tray: 3" deep; includes removable spray can holder

COLOR OPTIONS

MSC4

into the largest amount of savings!

pr

SAVE OVER$100

Save over $150

Save over $75

Save $70

$108.95

$96.95

$140.953"

6"

12"

3

$69.95

Free bbQ Set

$134.95

$172.50

buy

get

SBXP3L

3/8" drive 3 piece locKing impact eXtenSion Set ∙ Locking mechanism specifically designed for impact use and knurled sleeve designed to encapsulate the retaining ring to protect work environment and the tool

∙ Female end of the tool has a lead in angle of 45˚ allowing for easy installation of impact gun. Recess machined into female end is designed specifically for new style impact gun

BR12FTA

3/8" drive 12" long FleX handle ratchet ∙ 5 position flex head ∙ Closed head design keeps out dust and dirt

∙ Teardrop design for easy access

C24EFHM

1/2" drive 24" long breaKer bar ∙ Busts loose stubborn bolts ∙ Ergonomic style handle design

BBQSET

2 piece torQue ii bbQ tool Set

$35.65 Value

with your choice of any tool from above

THIS

THIS

PSFW4

4 piece pro-SWivel Filter Wrench Set ∙ Contains the most popular oil band sizes for majority of oil filters in the market

∙ Bands are made from stainless steel, plated for additional corrosion resistance

∙ Contains: Pro Swivel dual-material handle, 64-76mm band, 73-83mm band, 89-99mm band, & 96-111mm band

MG2LD led teleScopic magniFying glaSS ∙ Stainless steel antenna telescopes from 14" to 36" ∙ 2" viewing diameter ∙ 4X magnifying glass strength ∙ All-angle ball joint swivels 360° for desired viewing ∙ (2) high intensity LED lights are positioned in the magnifying head

∙ Includes: (2) button cell batteries

SPA3

3 piece angled plier Set ∙ 25° angled head design provides a more comfortable working position for the hand and allows greater visibility into the work area

∙ Forged from special tool steel for greater strength and longer life ∙ Set contains three popular pliers 7" high leverage diagonal cutter 71⁄2" combination pliers 83⁄4" long nose pliers

SBM146TA

3/8" drive 14 piece metric 6 point chrome SocKet Set ∙ Includes sizes: 6mm - 19mm

pr

save 10%

save 20%

save 10%

save over $35

save 10%

$23.55 Value

for both

$68.95$200.15

24"

8"

$265.95

$245.95 $346.95

6 Point Metric

$59.50

6"

11⁄2"

4"

2"

fall car care


Sockets

AFR88T

1/4" drive 88 tooth ratchet ∙ Streamlined teardrop head and long handle pattern for improved access in the most compact areas

∙ Recessed shift lever to prevent accidental shifting to improve job efficiency

∙ "Swollen" contour handle ergonomically designed for a firm, non-slip grip with optimum comfort

CFR248LFT

1/2" drive 88 tooth locKing FleX ratchet ∙ Unique 9 position locking flex head ensures that the ratchet head maintains the desired position regardless of size or applied load

∙ Streamlined teardrop ratchet head for improved access in the most compact areas

∙ Recessed shift lever to prevent accidental shifting to improve job efficiency

TRA200F

1/4" drive torQue Wrench ∙ Audible click when torque setting is reached ∙ Detent style locking collar prevents accidental change of torque setting

∙ Factory calibration tape supplied with each torque wrench

∙ +/- 3% clockwise accuracy between 20% and 100% range

SBDM146TA

3/8" drive 14 piece metric 6 point deep chrome SocKet Set ∙ Includes sizes: 6mm - 19mm

SBUPM106TB

3/8" drive 10 piece metric 6 point univerSal impact SocKet Set ∙ Ideal for any automotive, aerospace, and heavy truck application

∙ Includes sizes: 10mm - 19mm

SAXWK4TA

1/4" drive 4 piece eXtenSion Wobble chrome Set ∙ Allows access in confined areas ∙ 5/16" shank diameter ∙ Wobbles up to 16˚ off-center

88 ratchet gear teeth produce a swing arc just over 4° allowing faster work in the most compact spaces

reduce corner round off

with Matco’s Opti-Torque

system - applies torque to the

fastener sides, not corners

pr

Tighten up nuts and bolts

Hi-visibility to identify socket sizes at a glance with over sized laser markings

Features the innovative pinless preform socket end that enables true 360˚ rotation for maximum accessibility and torque strength

Save 15%

save nearly 10%

save nearly $30

save 10%

Save

over $15

$102.95$376.95

$399.50 $234.50

12 Point Metric

12 Point Metric

your choice

5˚

$58.95

$147.50$171.50 $148.50

5

S7GRCM4

4 piece 72 tooth metric combination ratcheting Wrench Set ∙ Includes sizes: 21mm, 22mm, 24mm, 25mm

S7GRFM16

16 piece 72 tooth FleX combination metric Set ∙ Includes sizes: 8-19mm, 21mm, 22mm, 24mm, 25mm

SRFBZLM102TA

10 piece Zero degree FleX ratcheting eXtra long Wrench Set ∙ Loosen or tighten any 6pt, 12pt, spline, TORX, square and even up to 50% rounded off fasteners

∙ Extra long beam for increased access ∙ Includes sizes: 10mm-19mm

SRBZXL62T

6 piece metric 12 point eXtra long Zero degree oFFSet Wrench Set ∙ Includes sizes: 8mm x 10mm, 11mm x 12mm, 13mm x 14mm, 15mm x 16mm, 17mm x 18mm, 19mm x 20mm

save 10%

RV16

hand rivet nut Kit ∙ Works for rivet nuts in M5, M6, M8, 10-24 & 1/4-20 sizes in aluminum steel and stainless steel

∙ Hand screw design for loading and unloading the nuts

MBX5

5 piece 1/2" drive bolt eXtractor Set ∙ Size range 3/4" - 1" ∙ Left hand spiral flutes will tightly grip the damaged fasteners for quick and easy removal

∙ Extremely versatile: can be used with hand ratchets, wrenches, or pneumatic impact wrenches

TD40M metric Set TD40S Sae Set

40 piece tap & die Sets ∙ Taps: 3 - 5 chamfered threads ∙ Ideal for all general purpose threading applications ∙ Dies: 1" across flats ∙ Twist lock drive tool ∙ Tap socket for 1/4" to 1/2" and M7-1.00 to M12-1.75 taps ∙ Tap socket for 0 to 1/4" and M3-0.50 to M6-1.00 taps ∙ Die spacer ∙ T-bar ∙ High carbon steel construction

pr

∙ 72 tooth ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 5° swing arc

∙ Extra-long beam length helps reach where standard wrenches will not ∙ non-slip box end

save 5%

save over $25

save over $25

Save 10%

Save 15%

Save over $40

$30.95

Power tools

$25.50

3"

$84.95

$219.95


Use for 3/32" Use for 3/16"

Use for 3/32" Use for 3/16"

$94.95

73149

21 piece turbo maX drill bit Set ∙ Three-flatted shank design provides better chuck grip and reduces slippage. Ideal for use in keyless chucks

∙ Sizes 1/16" - 3/8"

MD113B

circuit teSter, Straight cord ∙ Designed for testing electrical circuits and locating shorts, grounds, and open circuits

∙ 5' straight cord ∙ Checks 6- and 12-volt systems

CXP3BA

1/2" drive 3" impact eXtenSion ∙ Allows access in confined areas ∙ Clearly marked for ease of identification

SRA5TC

5 piece reducing adapter Set ∙ Drive sizes from 1/4" up to 3/4" ∙ Impact adapters for heavy-duty uses ∙ Chrome adapters for detailed work

MT2332

3/32" orbit 3" palm Sander

MT2416


MT2432


anti-vibration and dust shield system protects tool for longer life

prMatco customer from:

Elizabethtown, KY, USA

3/32" pattern ideal for final sanding, finishing and prepolishing process

3/16" great for surface preparation from body filler to paint primer

“Smooth”“This is the smoothest, flatest 3" Sander I have used. Very

easy to handle and the built in regulator is a huge plus"Matco customer from: Louisville, USA

Read additional reviews online @ www.matcotools.com

tip valve variable speed design for full throttle control

low profile design at only 3.5" in height

"This product is well worth the money."

each

save nearly 10%

save 10%

save 10%

save nearly 10%

save over $15

$129.95

Matco Diagnostics

- +

$148.95

$147.50

$155.95

7

$191.95

$36.50 $49.95

BG4KIT

bg4 bloW gun Kit ∙ Kit includes two 6" extensions, three needle tips, rubber tip, quiet flow nozzle, and the xtreme-flo nozzle

SE345

Silver eagle .45 hp right angle die grinder ∙ .45 HP motor makes this mini right angle tool the most powerful on the market

∙ Ergonomic grip design gives tool great feel ∙ Built-in regulator for speed control

8052

36" air comb ∙ Blows out dust and debris from air filters, radiators, condensers and more

MT2871RK

3" heavy duty reverSing cut oFF tool Kit ∙ 0.8 HP motor for increased power ∙ Unique adjustable locking guard allows user to rotate to 16 positions

∙ Reversing collar allows user to quickly switch from forward to reverse and direct sparks away from work

CP710

500 amp carbon pile load teSter ∙ Tests batteries rated as high as 1000 CCA or 160 amp hour ∙ Use to simulate actual cranking loads ∙ Test alternators, regulators and starters ∙ Large dual meters display the battery voltage and load current simultaneously, during the test

HVVPRO

hi-viS volt pro ∙ Dynamic voltage drop testing to verify circuits ability to deliver current

∙ Min/max glitch captures intermittent spikes or drops in voltage

∙ Voltage snapshot in any mode, any time ∙ Power and ground LED indicators

MT2834

1/4" drive palm air ratchet ∙ Composite housing design for improved look and comfort

∙ Throttle lever with tapered valve provides speed control

∙ Built-in regulator to control power ∙ Tumbled cylinder and motor system provide additional speed and power

pr

check your connections with

"This product is well worth the money."

As seen in Q3 Torque magazine and videowww.matcotools.com/torque

save 10%

save nearly 20%

save over 15%

save 10%

Save

over $25

save 5%

$34.507"

10"$65.05

$555.95

$279.95

HEAVY DUTY

$189.50

$171.50

made tough enough$104.50


$22.50

WHAT’S SO GREAT ABOUT THE MT2219 MATCO AIR SAW?

PBDC10

bent diagonal cutter plierS ∙ High leverage design offers easy cutting of hardened wire

∙ Cuts up to 1/4" soft wire and 1/8" hardened steel wire

∙ 12˚ angled head design

PHDD7B

diagonal cutting plier ∙ Heavy duty plier with cushioned grip handles

SE116

Silver eagle 1" drive impact Wrench ∙ Powerful rocking dog clutch provides 1,600 ft. lbs. of torque

∙ Durable aluminum housing with matte black finish ∙ Perfect for truck shop environments

MT2219

gear driven air SaW ∙ Unstoppable! Cuts up to 6 gauge (5mm) ∙ Patent-pending gear transmitted design provides over 200% more cutting capacity than standard air saws

∙ 360˚ swivel exhaust ring directs air away from the work area

MPT4001

cooling SyStem adapter Set For large trucKS ∙ Compatible with cooling system pressure tester kits (RPT101, RPT102) and vacuum assist refillers (MCR100, MCR101, and MCR102A)

∙ Adapters included for use on international, Freightliner, Sterling, Volvo, Cascadia, Kenworth and Peterbilt trucks

98140T

triton plugSaver SparK plug Kit ∙ Kit contains all the components necessary to repair stripped or damaged sparkplug port threads in Ford Triton 4.6L, 5.4L and 6.8L truck engines

∙ Speedy repair without removing the cylinder head from the engine

∙ Kit components include reamer tap, tap extension, installation tool and inserts that provide stronger replacement threads than the original

MTM7

Full-SiZe FlaShlight m7 ∙ Eight light functions in all ∙ Powered by 4-AAA batteries, casts 220 lumens, extremely bright beam for more than 650 ft.

∙ 235 meter beam distance

70001

v7 bruSh ∙ V-shaped electrostatic bristles sweep more effectively than traditional round bristles.

∙ Bristles are oil and acid resistant

∙ Built in squeegee to remove water from many surfaces

pr

CheCK ouT The demo video

The powerful difference is within the geared mechanism that drives the saw.

Save

$30

save nearly 10%

save 10%

save over $25

save over 15%

SAve

over $30

Save

15%

$66.50

$55.50$9.50

$54.50

14"

$19.50

9"

$15.95

fall car careUnder Hood

9

$217.95

$52.50

M9038

6 piece relay bypaSS combo Set ∙ Actuates fuel pump when the engine is not running

∙ Plugs in place of relay ∙ Controls fuel pump independent of "key on" systems

∙ Operating range: 20 amp continuous, 30 amp surge (12V)

∙ Covers most domestic, Japanese, Korean and German applications

AHR481

adJuStable Style hoSe remover ∙ Quickly and easily loosens and removes hoses with a simple forward and backward motion with no damage to the hose connectors

∙ Tool consists of a main body with moving jaw that adjusts to fit hoses with diameter between 24mm to 53mm

HP2285

Fuel hoSe clampS ∙ Quick mounting, screw action clamps with strong glass-filled nylon bodies

∙ Prevents leaking ∙ Pinch fuel lines, flexible hoses including brake and vacuum lines

HP56

heavy duty hoSe pinch-oFF plier ∙ Great for radiator and heater hoses, air, water, vacuum and fuel lines

∙ Automatic, heavy-duty patented mechanism for positive hose clamping without springs or manual adjustments

∙ Features cushioned grips, 2½" OD capacity

AC98772A

dual 134a / r12 maniFold gauge Set ∙ Dual aluminum block for R-12 and R134A with two sets of 72" hoses to eliminate cross-contamination

∙ Heavy-Duty couplers to minimize refrigerant loss ∙ Flutter-free silicone dampened gauges for accurate pressure readings

radiator hoSe toolS ∙ Matco's exclusive ergonomic handle ∙ Removes radiator hose from clamps and fittings ∙ Pulls cotter pins

VH479

vacuum hoSe plier ∙ Removes 5/32" to 1/2" vacuum and fuel line hoses ∙ One jaw grasps hose; the other jaw pushes off the line

SLSK90

4 piece Steel line Stopper Kit ∙ Use to seal steel lines once disconnected ∙ Prevents fluid leaks and contamination during service ∙ Use with all automotive fluids

pr

check those hoses n' lines

mASTer KiT

rTG1mB - Green

SAVE

OVER $35

Save

15%

save 5%

save 10%save over 5%

save nearly 15%

save over 10%

save 15%

$187.95

$168.50

$29.95

$74.50

$25.95

$81.50

$42.50


$85.50

Under carfall car care

ITRT299

inner tie rod tool ∙ Slips on easily and does away with fumbling for separate size attachments, saving time and money

∙ Removes and mounts inner tie rods with patented roller and cam mechanism

∙ Grips securely on round hexagonal and octagonal tie rods from 35mm - 45mm

TRT5

large inner tie rod tool ∙ Works on inner tie rods with inaccessible wrench flats on many trucks and SUVs

∙ This tool comes with five crows feet sizes 17⁄16", 33.6mm, 38.4mm, 40mm crow foot for GM and 42mm to fit many Toyota, Nissan, Ford, Lincoln Mercury and Chevrolet truck and SUV applications

WTK5500

5 piece 1/2" drive torQue eXtenSion Set ∙ Prevents damage to wheels, drums, and rotors

get wheels winter ready

PM8026

4/5 pin toWing maintenance Kit ∙ Kit Includes: 4/5 pin trailer tester, cleaning tool for harness connectors, and a 2 ml tube of DeoxIT cleaner

∙ Quickly test, clean and repair trailer connections

ABR62

air bag removal Kit ∙ A must for steering wheel air bag removal without damage ∙ Angled tools allow you to access the air bag without removing the steering column cowl

∙ Works on Audi, BMW, Mercedes, and VW

SSB4

Suregrip Serpentine belt tool ∙ Jaws actuate to allow user to grab hold of the belt

∙ Long reach for use in tight spaces ∙ Belt will not slip from the jaws allowing easier installation of difficult serpentine belts

SPDB3K

3 piece braSS driFt punch Set ∙ Knurled surface for a better grip ∙ Brass punches are used for non-marring and non-sparking applications

∙ Set includes: 3/8", 6" long; 1/2", 7" long; 3/4", 8" long

SAE164

in-line Sae Flare tool Kit ∙ Low profile design allows for use on or off of the vehicle

∙ Designed to be used with a ratchet or wrench ∙ Used to make perfect single or double flares

pr

save nearly 15%

save 15%

save nearly $15

save nearly 5%save nearly 15%

save 10% SAve

15%

save 15%

$35.99

$24.95

$24.95

$39.95

$29.95

$24.95

$41.99

$41.99

$28.99

$39.95

$32.50

11

fall

$43.95

$26.95

$21.95

$37.99

$13.95

top hat Fire SKull PDMT256 [SiZe]

CP-030VISTA

neXt brand aSSiSted opening

PDMC245

marlin cap

PDMC255

vorteX cap

SCH104L

Schrade Folding Frame locK KniFe

SCH103S

Schrade clip Folding KniFe

IMCG [SIZE + A] (example: IMCGXXLA) Sizes: M-XXL

inSulated camo glove ∙ Dual layer Spandex top lined with a water and wind resistant lining for additional warmth

FinK truSt pocKet tee PDRMT6 [SiZe]

PDNV213

harley-davidSon® SKull coat hooK

PDNV229

matco blacK banner 8'X4' With grommetS

PDRMC6

rat FinK trucKer cap

WT-097N

Full grip machete

FRONT

BACKBACK

PDNV239

claire 16 oZ. pilSner glaSS ∙ Includes two matching tin coasters in a beautiful custom cylinder

The

sale

of c

erta

in k

nive

s is i

llega

l in

som

e st

ates

and

it is

ulti

mat

ely t

he re

spon

sibi

lity o

f the

di

strib

utor

to k

now

and

obe

y the

law

s of t

he s

tate

and

loca

litie

s whe

re h

e/sh

e re

side

s and

se

lls to

ols.

Mat

co d

oes n

ot d

efen

d or

pay

cou

rt co

sts a

ssoc

iate

d w

ith d

istri

buto

rs b

reak

ing

thei

r sta

te a

nd lo

cal l

aws a

nd th

e fe

es th

ey in

cur i

n th

e de

fens

e of

thei

r act

ions

.GEAR for

pr

PDNV74

harley-davidSon® motorcycleS bucKet SnacK Set

PDDC1 – White pacKPDDC2 – blacK pacK

PDHHRNV2 hot rod banner - 5' X 3'

PDNV237

Flying eagle – it screams too!

PDNV46

matco toolS belt bucKle

Small decal 6.25" X 3.5"

PDNV99

16 oZ. double Wall tumbler ∙ Insulated acrylic tumbler with straw

Free beanie

with purchase!

∙ Sizes: M-XL $24.95 ∙ Sizes: XXL-XXXL $28.95

∙ Sizes: M-XL $35.95 ∙ Sizes: XXL-XXXL $43.95

save nearly 20%

$529.95

ask your distributor for a demonstration!

falling

$199.95

12v cordleSS inFinium 1/4" impact Wrench and ScreWdriver Kit

ScreWdriver

led FlaShlight2.0ah 12v lithium battery (2)

impact Wrech

with PiVoting hEadwith Built-in fuEl gaugE foR suPERioR Run timE

with 60 ft. lBs. of max toRquEwith two sPEEds - 400 & 1600 RPm (low/high)

PR1913RED

The products on Matco’s National Promo are limited in quantity and subject to availability. Matco

reserves the right to correct printing errors.

Save $60

MUC1238R

12v cordleSS inFinium 3/8" ratchet

save $20

Join us on facebook for fan exclusive deals! facebook.com/matcotools

2.0 ah batterythan the current 1.5 Ah batteries33% MORE RUN TIME

Matco customer from: Sparta, TN, USA

∙ One of the smallest tools on the market ∙ Ergonomic variable speed trigger provides precise control

∙ Trigger activated LED light ∙ Use with impact sockets

∙ High torque drivetrain with 12-speed adjustable clutch ∙ Precise variable-speed trigger with one hand forward/reverse switch

∙ Industry exclusive bit retainer holds both 1" regular bits and power bits

∙ 3W LED light provides focused beam ∙ 136 lumen rating

∙ Class leading long lasting Li-Ion 2.0Ah battery ∙ Battery is compatible with all Matco 12V tools as well as previous generation of 10.8V tools

MUC122COMBO

∙ Small head design (1" wide) for superior access in tight areas

∙ Variable speed comfort trigger gives user precise feel ∙ 30 ft. lbs. of torque, 25 ft. lbs. of working torque ∙ Trigger activated LED light helps illuminate work area in poorly lit environments

∙ **Battery and charger not included**

Stop over air hoses!Make the switch to cordless

"BEST I havE EvEr uSEd"Just got mine in a few days ago. Been using a similarly-designed unit from another mfr. That one PALES in comparison to this Matco

unit. Nothing I do not like about this piece.

2013 promo 19

Documents

Transcript of 2013 promo 19