2013 Banjo Catalog

Liquid Handling Products

Effective September 24, 2012

Catalog #54

Valves!5-Way ValveFEATURES FKM (viton type) seals. PTFE self-lubricating stem bush ings and ball seats cannot stick or bind. Precision molded in polypropylene. Polypropylene is reinforced with fiberglass for additional strength. Self-aligning ball moves freely against the PTFE seats for smooth operation. The valve opens and closes with very little pressure on the handle. Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats. Handle locks into place. Mounting options.

NEW

2013 NEW2" Full Port Manifold Stubby Valves w/SSFEATURES Stainless steel ball, handle and stem. Locking handle. 100 P.S.I. PTFE ball seats. Glass filled polypropylene. FKM (viton type) body seals. Stainless steel bolts.

Padlock Capable!

4 BOLT 5 Way VALVEPART NO MV225CF MAX PIPE OPENING QTY DESCRIPTION PSI SIZE THRU BALL 2" Full Port Flange 5 Way Valve 200 2" 2" 1 PRICE $391.34

2" FULL PORT MANIFOLD STUBBY VALVES W/SSPART NO DESCRIPTION 2" FP NPT x 2" Flange MVSMT220HSFP w/SS Ball, Stem & Handle MAX PIPE OPENING QTY PSI SIZE THRU BALL 100 2" 2" PRICE 1 $196.22

See pages 60 & 64 for our other valve choices!

i

PRODUCTS2" Full Port 316 SS Stubby ValvesFEATURES 100% PTFE ball seats. Unique compact design. All TFE seals. No elastomers.

2" Full Port 316 SS SweepFEATURES Direct replacement for standard 90 flanged couplings.

Fl oved M a xo w f o r GPM !

Imp

r

2" FULL PORT STAINLESS STEEL STUBBY VALVEPART NO DESCRIPTION PIPE OPENING SIZE THRU BALL QTY 2" 2" 1 PRICE $328.13 PART NO 2" FP Male Adapter x 2" NPT VSFMT220SS Stainless Steel Stubby Valve

2" FULL PORT STAINLESS STEEL SWEEPDESCRIPTION 2" Full Port SS Flange x Flange Sweep QTY 1 PRICE $110.47 M220SWP90SS

2" FULL PORT MANIFOLD STAINLESS STEEL STUBBY VALVESPART NO DESCRIPTION 2" FP Flange x 2" FP Flange MVS220SS Stainless Steel Stubby Valve 2" FP Flange x 2" Male Adapter MVSF220SS Stainless Steel Stubby Valve 2" FP Male NPT x 2" FP Flange MVSMT220SS Stainless Steel Stubby Valve PIPE OPENING QTY SIZE THRU BALL 2" 2" 2" 2" 2" 2" 1 1 1 PRICE $328.13 $328.13 $328.13

See page 71 for our poly sweeps!

ii

2013 NEW3" Check ValvesFEATURES One piece construction. 150 P.S.I. maximum. 1-2 P.S.I. spring. Glass reinforced polypropylene. 316 stainless steelsprings. EPDM gasket.

CHECK VALVEPART NO CV300 DESCRIPTION 3" Full Port Threaded Poly Check Valve MAX PIPE QTY PSI SIZE 150 3" 1 PRICE $41.10 PART NO MCV300

FLANGED CHECK VALVEDESCRIPTION 3" Full Port Flanged Poly Check Valve MAX PIPE QTY PSI SIZE 150 3" 1 PRICE $42.49

Bolted Flange ClampsFEATURES Strong positive connections. 316 stainless steel construction. 2" clamps pressure to 150 P.S.I. at 70F. 3" clamps pressure to 125 P.S.I. at 70F. Ideal for high torque applications. Stainless steel bolt

T-Bolt Flange ClampsFEATURES Strong positive connections. 316 stainless steel construction. 2" clamps pressure to 150 P.S.I. at 70F. 3" clamps pressure to 125 P.S.I. at 70F.

T-Bolt

Bolted Teflon coated SS nut

FLANGE CLAMPSPART NO FC220B FC300B DESCRIPTION 2" Full Port Bolted Flange Clamp 3" Bolted Flange Clamp TORQUE QTY PRICE $43.50 $48.50 PART NO FC220TB FC300TB 90-100 in/lbs 1 90-100 in/lbs 1

T-BOLT FLANGE CLAMPSDESCRIPTION 2" Full Port Hi-Torque T-Bolt Flange Clamp 3" Full Port Hi-Torque T-Bolt Flange Clamp TORQUE 125 in/lbs 125 in/lbs QTY PRICE 10 $30.79 10 $32.17

2

PRODUCTSManifold Inductor SystemFEATURES Installed after pump; suction completely empties inductor tank. Keeps tank free of chemicals. 2" &3" full port flow by-pass. Easy assembly/installation with manifold connections.

*Note: Tank not included.

Draws wettable powders or liquids from inductor tank for thorough chemical mixing!

Choose Valve!Choose Connections!

Flow

Flow

MANIFOLD INDUCTOR SYSTEMPART NO MIS220 MIS300 DESCRIPTION 2" Full Port Flange xFlange-Assembled 3" Flange xFlange-Assembled QTY PRICE 1 $530.23 1 $923.62

Full Port By-Pass!

See page 58 for 2" FP stubby valve choices! See pages 74 -75 for connections!

3

2" Full Port!FEATURES 316 stainless steel construction. FKM (viton type) standard, EPDM face seals available. 100%PTFE ball seats. 300 P.S.I. maximum operating pressure. 300F maximum operating temperature. Spillage data: Less than 1cc. Filled valve for no product residue. 20 Degrees rotation either direction to ease coupling male and female halves. When liquid is flowing, Dry-Mate halves cannot be uncoupled without turning handles to closed position. When Dry-Mate halves are apart, handles cannot be turned to open position.

2013 NEWpatented

APPLICATIONS

Agriculture Industrial Pharmaceutical Chemical processing

Available with Female NPT or BSP Threads

SIZES Sizes: 2" Full Port (Female NPT &BSP Threads) PREVENTS ACCIDENTAL SPILLS AND EXPOSURE!Male & Female shown coupled together. Male & Female sold separately as shown below.

2" FULLPORT STAINLESS STEEL DRY-MATEPART NO DESCRIPTION MAX PIPE OPENING QTY PSI SIZE THRU BALL 300 2" 300 2" 300 2" 300 2" 300 2" 300 2" 2" 2" 2" 2" 2" 2" PRICE 2" FP Male x NPT Threads w/ DM220ASS all PTFESeals 2" FP Female x NPT Threads DM220DSS w/ FKM (viton type) Seals 2" FP Female x NPT Threads DM220DSSE w/EPDM Seals 2" FP Male x BSP Threads w/ DM220ABSS all PTFESeals FP Female x BSP Threads DM220DBSS 2" w/ FKM (viton type) Seals FP Female x BSP Threads DM220DBSSE 2" w/EPDMSeals 1 $1,188.30 1 $1,803.65 1 $1,803.65 1 $1,188.30 1 $1,803.65 1 $1,803.65

New face seal design for easy seal interchange! No need to disassemble the valve to change face seals.

Male Dry-Mate

Female Dry-Mate

Male & Female Sold Separately4

PRODUCTS11 12 2 5 14 152 21 22

1

1026 19

11 12 24 25 27

7

8

9

27

9

17

6

8

16

7

13 4

3

3

5

4

6

14

23 10

17

15

20

13

18

16

26

REPLACEMENT PARTS DM220DSS REPLACEMENT PARTS DM220ASSITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO DB20281 DM220CAP DM25151SS DM25155SS DM25204SS* Button Spring DustCap Stem MaleHandle Interlock Body Shim DM25153SSM 2" Male Handle DESCRIPTION QTY 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PRICE $3.49 $55.07 $77.19 $57.94 $48.37 $11.27 $748.42 $183.77 $153.72 $18.17 $2.26 $2.26 $1.81 $16.18 $6.03 $119.80 $126.57 $266.10 ITEM 2 3 4 5 6 6 6 7 8 9 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 26 27 PART NO DB20281 DM220PL DM25001 DM25002 MLS234G MLS234GV* DM25294 DM25004 DM25009 DM25010 DM25010A DM25151SS DM25153SSF DM25154SS DM25204SS* DM25254FSS DM25255SSHF DM25256SS DM25258FV1* DM25258FV2* DM25288FSS DM25289SS VSS15020 VSS15021 VSS15060* VSS15159 VSS15160* DM25018 DM25018A DM25020 DM222SS Button Spring DustPlug Seal Ring Snap Ring EPDM 234 O-Ring (old style) FKM(viton type)234 O-Ring (old style) Groove Pin Clamp Arm Clamp Lever (old style) Clamp Lever (new style) Stem Female Handle FemaleHandle Interlock Body Shim Body Ball End Plate Filled Valve Body Seat PTFE Filled Valve Body Plate Seat PTFE Interlock Button Locking Yoke5 8" 5 8"

DESCRIPTION

QTY 2 1 1 1 1 1 2 2 2 2 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 4 4 4 1

PRICE $3.49 $70.66 $9.61 $28.25 $1.74 $6.30 $42.00 $10.79 $29.11 $29.11 $38.70 $57.94 $55.07 $53.45 $11.27 $911.65 $144.78 $153.72 $119.80 $126.57 $18.17 $93.13 $2.26 $2.26 $1.81 $16.18 $6.03 $13.42 $8.50 $6.31 $346.79

2" FP FKM(viton type) Face Seal (new style) 1

DM25254MSS Body DM25255SSH Ball DM25256SS VSS15020 VSS15021 VSS15060* VSS15159 VSS15160* End Plate5 8" 5 8"

DM25288MSS Safety Button - 20 Jam Nut Lock Washer

Stem Packing Packing Nut Stem Shim

DM25258FV1* Filled Valve Body Seat DM25258FV2* Filled Valve End Plate Seat DM221SS Repair Kit

- 20 Jam Nut Lock Washer

Stem Packing Packing Nut Stem Shim Cam LeverPin (old style) Cam Lever Pin (new style) #10- 24 x 5 16" Set Screw Repair Kit

Valve repair kits contain items marked with asterisk *. 5

N/S

2013 NEWEPA IBC Tank Lid & PlugFEATURES Precision molded in polypropylene. Polypropylene is reinforced with fiberglass for additional strength. Meets EPA standards.

Clear T Line Strainer BowlsFEATURES Precision molded in polycarbonate. Allows for easy visibility of product.

Slot for tamper evident device! (not provided)

6" IBC TANK LIDS W/VENTED 2" PLUGPART NO DESCRIPTION GASKET EPDM QTY 1 PRICE $21.58 PART NO LST100BCB LST150BCB TL652EPA 6" EPA Tank Lid w/Vented 2" Plug

CLEAR T LINE STRAINER BOWLSDESCRIPTION " & 1" Clear Bowl 1" & 1" Clear Bowl QTY 1 1 PRICE $23.18 $30.39

231EPA

See page 120 & 121 for T line strainers.

Slot for tamper evident device! (not provided)13778

075MPTL*

*Non-removable once inserted into plug.2" VENTED BUNG PLUGPART NO 231EPA 075MPTL 13778 DESCRIPTION EPA plug with Non-Removable Vent " non-removal vent EPDM O-ring for vent QTY 1 1 1 PRICE $8.02 $2.28 $1.86

6

PRODUCTS2" Manifold Poly PumpsFEATURES Precision molded construction. Lightweight. Corrosion resistant. Superior design. Low maintenance. EPDM Standard, FKM (viton type) available.

NEW!

DO NOT USE WITH FLAMMABLE LIQUIDS.

CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS. NOTE: Engine warranty service available at authorized Briggs & Stratton and Honda dealers.

2" MANIFOLD POLY PUMPS W/GAS ENGINESPART NO M220P6PRO M220PH5 DESCRIPTION 2" Manifold Poly Pump w/6.5 HP Briggs & Stratton Pro Series Engine 2" Manifold Poly Pump w/5.5 HP Honda Engine HP QTY 6.5 1 5.5 1 PRICE $1,112.86 $1,900.76

See page 74 & 75 for fittings and clamps.

7

VALVES

C

O

R

P

O

R

A

T

I

O

N

LIQUIDHANDLINGPRODUCTS Banjo Corporation specializes in injection molding of glass reinforced polypropylene with an excellent reputation for high quality. Key properties of glass-reinforced polypropylene include being rigid and lightweight, having excellent chemical and corrosion resistance, stress cracking resistance, low moisture absorption and high impact resistance. Banjo prides itself on innovative designs, skillful engineering and precise manufacturing. APPLICATIONS FOR BANJO POLYPROPYLENE LIQUID HANDLING PRODUCTS*: Agricultural Fertilizers, Herbicides, Pesticides, Insecticides O rganic & Inorganic Chemicals Industrial Chemicals P ulp & Paper Reverse Osmosis D eionized Water Inks, Paints, Coatings A dhesives, Lubricants, Resins Soaps & Detergents A lkalis, Acids, Solvents, Corrosives Water Treatment, Wastewater T extiles Plating C ircuit Board Chemistry Pharmaceuticals T ank Trucks, Rotomolded Tanks, IBCs (Intermediate Bulk Containers) *All recommendations as to use of parts and materials mentioned in this catalog assume that the buyer will ascertain their suitability and that all safety and health standards are met. PRODUCT CHANGES Banjo Corporation reserves the right to make design changes for the improvement of a product without notice. TECHNICAL SUPPORT SERVICES Banjo Corporation has technical service personnel who are always ready to assist you with your questions and concerns about Banjo Liquid Handling Products and your specific application. We are committed to being your resource for quality products and efficient technical service. QUALITY Banjo Corporation is dedicated to providing quality products and services that satisfy our customers needs. Quality is the responsibility of every employee. Our focus is on continuous improvement and innovation of quality products. Due to our policy of continuous improvement all specifications are subject to change without notice. PRICING Banjo Corporation is dedicated to providing quality products, however our pricing is subject change without notice.

PIPE FITTINGS

CAM LEVER COUPLINGS

IBC/TANK ACC.

DRY-DISCONNECTS

MANIFOLD SYSTEMS

ELECTRIC VALVES

PUMPS

LINE STRAINERS

Let BANJOMAN point you in the right direction with his helpful tips and guides to our brand new products. Look for BANJOMAN throughout our catalog to assist you.

C

O

R

P

O

R

A

T

I

O

N

REFERENCE

A unit of

Catalog No. 54-00 20138

www.banjocorp.com

ORDERING INFORMATION

[email protected]

HOW TO ORDER Contact your local Banjo Distributor or Banjo Corporation: BANJO CORPORATION 150 Banjo Drive Crawfordsville, Indiana 47933 USA Telephone: (765) 362-7367 Fax: (800) 458-0232 International Fax: (765) 362-0744 E-Mail Technical Questions: [email protected] E-Mail Orders: [email protected] Website: www.banjocorp.com Please order in bag/box quantities for quick and easy shipping/ receiving of your order. Use BANJO Part Numbers when ordering. All items priced each, not per bag or box quantity. MINIMUM ORDER Banjo Corporation requires a $50.00 net minimum order, air shipments excluded. Orders less than $50.00 net will not be accepted. CONDITIONS OF SALETERMS AND DELIVERY Terms are 1% 15, net 30 days upon credit approval. Delivery is F.O.B. Crawfordsville, Indiana unless otherwise specifically provided in writing. All orders will be shipped freight collect except orders shipped U.P . S. On U.P . S. shipments the actual freight charges will be prepaid and added to the invoice. CLAIMS & RETURNS All returns must have an accompanying Return Goods Authorization number (RGA Number) regardless of reason for return. Please contact Banjo Corporation for an RGA number prior to returning goods to the above address. Inspect all shipments for damage upon receipt. If any cartons are damaged, do not sign for or accept them without driver making a notation on the freight bill or receipt. After receiving the shipment, remove the goods and thoroughly inspect immediately. If any concealed damage is discovered, notify the delivering carrier at once in writing. Do not move damaged merchandise until further inspection has been made. Save carton and packing material for inspection. Do not order carrier to return merchandise to our factory without contacting Banjo.

Claims for shortages or inaccurate filling of orders must be made within 30 days after receipt of goods. Return shipments must be prepaid. C.O.D. or Freight Collect shipments will not be accepted. There will be a 30% restocking charge on any items returned for credit or exchange when the error is not ours. Goods must be in new and original condition without labels, stickers or markings, other than Banjo Corporation. RETURN FOR REPAIR POLICY 1. Items returned for repair will not be accepted without prior approval and a return authorization number. 2. Defective warranty items will be replaced or repaired at manufacturers option on a no charge basis. 3. The customer will be charged for the appropriate parts and labor charges for all non-warranty work. 4. The manufacturer will not provide replacement parts at no charge while repairs are being made. 5. A description of the application (media, temperature, pressure) and performance of the items must accompany the return. Please specify type of failure and exact location of failure. 6. Prior to returning, items must be cleaned and neutralized. Items which have not been cleaned and neutralized will not be inspected or repaired. WARRANTY Please contact Banjo Corporation for warranty evaluation. Banjo Corporation is not responsible for product damage resulting from accident, misuse or abuse, or lack of reasonable care. Upon confirmation of defects, Banjo Corporation will repair or replace defective products without charge. No responsibility is assumed for labor, or any special, incidental or consequential damages. We recommend that anyone intending to rely on any recommendation or to use any parts or material mentioned in this catalog should satisfy themselves as to such suitability and that all applicable safety and health standards are met. The only reliable means for making a final selection is actual field testing under the conditions of intended use.

BANJOPUMPRETURNSUPONRECEIPTOFPUMPS: 1. Inspect pump for damage! 2. If a pum p is damaged, do not sign for or accept damaged cartons without driver making a notation on freight bill or receipt. 3. Do not move damaged merchandise any further until inspection has been made. Save carton and packing material for inspection. 4. Do not order carrier to return merchandise to our factory without contacting Banjo Corporation. WHENRETURNINGPUMPS: 1. Gasoline Engines must be empty of fuel! 2. Pumps must be cleaned and neutralized. 3. Pack pump in heavy-duty carton with sufficient packing to protect bottom and all sides. 4. Specify type of failure and exact location of failure. 5. A description of the application (media, temperature, pressure) and performance of the items must accompany the return. 6. The manufacturer will not provide free replacement parts or pumps while repairs are being made. 7. The customer will be charged for the appropriate parts and labor charges for all non-warranty work. 9 8. Defective pumps will be replaced or repaired at manufacturers option. 9. Banjo Corporation is not responsible for pump/engine damage resulting from accident, misuse or abuse, or lack of reasonable care. 10. No responsibility is assumed for labor, or any special, incidental or consequential damages. 11. Engine warranty service and engine parts/accessories available at authorized Honda and Briggs & Stratton Dealers. ENGINEWARRANTY The engines, hydraulic motors, and electric motors are warranted by the Engine Manufacturer, notby Banjo Corporation. Please see engine/motor owners manual. Engine/ motor repair, engine replacement parts, and engine warranty claims must be handled through an authorized engine dealer in your locality.

INDEXVALVESVALVES

DRY-DISCONNECTS

ELECTRIC VALVES

p. 11

p. 81

PINCH VALVES

IBC/TANK ACCESSORIESp. 31

MANIFOLD SYSTEMS

CHECK VALVES CAM LEVER COUPLINGSp. 32/72

p. 91

DRY-DISCONNECTS

ELECTRIC VALVES

IBC/TANK ACC.

p. 102

PIPE FITTINGSp. 33

CAM LEVER COUPLINGS

MANIFOLD SYSTEMSp. 111

PIPE FITTINGS

p. 48

GARDEN HOSE FITTINGS

PRESSURE RELIEF VALVES LINE STRAINERS

p. 117

LINE STRAINERS

p. 54

FLOW METERSPUMPS

p. 118 p. 70

PUMPS

BOOM NOZZLE PIPE ADAPTERSREFERENCE

p. 7210

p. 129

www.banjocorp.com

FEATURES

Polypropylene Micro Valves

VALVES

[email protected]

90 rotating handle. Precision molded polypropylene is reinforced with fiberglass for additional strength. Standard FKM (viton type) seats and O-rings. Maximum operating pressure 300 P.S.I.

LV038050MTV

LV038MTV

VAL VES

LV050100MTV

POLYMICRO VALVESPART NO LV025V LV038V LV050V3 8"

POLYMICRO VALVESPART NO LV025MTV LV038MTV MAX THREAD OPENING QTY PRICE PSI SIZE THRU BALL 3 " " Female x Male NPT Micro Valve 300 " 1 $16.12 8 DESCRIPTION3 3 8" Female 8" 3 3 15 15 8" 8" 32" 32"

DESCRIPTION

" Female NPT Micro ValveFemale NPT Micro Valve

MAX THREAD OPENING QTY PRICE PSI SIZE THRU BALL 3 " 1 $16.12 300 " 8 300 3003 8" 3 15 8" 32"

1 1

$16.12 $17.18

" Female NPT Micro Valve

"

x Male NPT Micro Valve 300 3 8" Female x "Male NPT Micro 300 38"x" LV038050MTV Valve " Female x Male NPT Micro Valve 300 " LV050MTV " Female x 1" Male NPT Micro 300 " LV050100MTV Valve

1 $16.12 1 $17.18 1 $17.18 1 $17.18

LVHB038050MTV

POLYMICRO VALVESPART NO LVHB025V LVHB038V LVHB050V LVHB075V MAX THREAD OPENING QTY PRICE PSI SIZE THRU BALL 3 " " Hose Barb Micro Valve 300 " 1 $16.12 8 DESCRIPTION3 8"

Hose Barb Micro Valve 300 300 300

3

8"

3 15 15

8" 32" 32"

1 1 1

$16.12 $17.18 $17.18

" Hose Barb Micro Valve " Hose Barb Micro Valve

" "

LVHB075100MTV

POLYMICRO VALVESPART NO DESCRIPTION3 8" Hose Barb x

" Male NPT 300 LVHB038050MTV Micro Valve " Hose Barb x 1" Male NPT LVHB075100MTV Micro Valve 300 11

MAX THREAD OPENING QTY PRICE PSI SIZE THRU BALL3 8" 3 15 8" 32"

1 1

$17.18 $17.18

"

Polypropylene Bolted Ball ValvesFEATURES FKM (viton type) seals. Precision molded polypropylene is reinforced with fiberglass for additional strength. Self-aligning ball moves freely against the PTFE seats for smooth operation. The valve opens and closes with very little pressure on the handle. Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats. PTFE self-lubricating stem bushings and seats cannot stick or bind. Stainless steel bolts.VALVES

4 BOLT VALVESPART NO V050 V075 V100 V100FP V125 V125FP V150 V200 DESCRIPTION

" Full Port Valve " Full Port Valve1" Standard Port Valve 1" Full Port Valve 1" Standard Port Valve 1" Full Port Valve 1" Full Port Valve 2" Standard Port Valve

MAX PSI 150 150 150 150 150 150 150 150

PIPE SIZE

OPENING THRU BALL

QTY

PRICE

" "1" 1" 1" 1" 1" 2"

" " "1" 1" 1 " 1 " 1"

24/box $39.68 24/box $39.68 24/box $39.68 24/box $43.75 24/box $43.75 24/box $56.24 24/box $56.24 24/box $56.24

FEATURES FOR LOCKING DEVICE 304 Stainless steel construction. Installs under valve handle. Comes complete with handle and locking device. Padlock not included*

LOCKING DEVICEPART NO VL20153* DESCRIPTION Locking Device VALVE USED V125FP, V150 & V200 QTY 1 PRICE $15.12

VL20153

FEATURES FOR MOUNTING BRACKETS 316 Stainless steel construction. Straight and 90 available.

MOUNTING BRACKETSPART NO V10270 V10271 V25270 V25271 DESCRIPTION Straight Mounting Bracket 90 Mounting Bracket Straight Mounting Bracket 90 Mounting Bracket VALVE USED V100FP & V125 V100FP & V125 V150 & V200 V150 & V200 QTY 1 1 1 1 PRICE $8.95 $8.95 $14.95 $17.63

V10271

V10270

V25270

V25271

FEATURES FOR REMOVABLE HANDLE KIT Removable handle deters opening the valve for safety, vandalism and theft. VRH200K

REMOVABLE HANDLE KITPART NO VRH200K DESCRIPTION Removable Handle Kit VALVE USED V125FP, V150 & V200 QTY 1 PRICE $30.78

FEATURES FOR HANDLE RISERS Allows extra clearance between handle and body for tight spaces.

3 Piece Kit

HANDLE RISERSPART NO V10153138 DESCRIPTION 1" x 138" Handle Offset VALVE USED V075BL & V100BL V100FP, V125, V075SL & V100SL MV200BL, V125BL & V150BL V125FP, V150, V200 V125SL, V150SL V200FP & V200SL QTY PRICE 1 1 1 1 1 $6.62 $6.62 $6.62 $6.62 $6.62 $6.62 V10153138BL 1" x 138" Handle Offset

HANDLE RISER

V20153138BL 2" x 138" Handle Offset V20153138 V25153138 2" x 138" Handle Offset 138" Handle Offset 2" FP x 138" Handle Offset

V25153138BL 2" FP x

MV220BL & MV300BL 1

12

www.banjocorp.com

VALVES13 14 9 12 11 1 2 8 15 10

[email protected]

12ITEM 1 2 3 4 5 5 5 6 7 8 9 10 11 12 13 14 15 N/S PART NO V07151A V10153A V07254 V07155* V05256 V07257 V07256 V07264* V07159* V07060* V07017 V07018 V07019 V10020A V07021A V07163* V07200 Stem Handle Valve Body Valve Ball

11

5

4

7QTY 1 1 1 1 2 2 2 2 2 1 1 4 4 4 1 1 1 1

6

3ITEM 1 2 3 4 5 5 6 7 8 9 10 11 12 13 14 15 N/S N/S N/S

6

7PART NO V10151A V10153A V10254 V10155* V10257 V10256 V10264 V10159* V10060* V10117 V10118 V10119 V10020A V07021A V10163* V10200 V10270 V10271

5

10

REPLACEMENT PARTS V050-V075-V100DESCRIPTION PRICE $3.76 $4.30 $8.17 $6.47 $9.41 $9.42 $9.42 $4.78 $4.78 $2.29 $2.29 $1.12 $0.42 $0.42 $1.03 $0.42 $1.46 $23.08

REPLACEMENT PARTS V100FP-V125DESCRIPTION Stem Handle Valve Body Valve Ball 1" Full Port End Plate 1" End Plate FKM (viton type) Valve Body O-Ring Upper Stem Bushing Thrust Washer516" 516" 516"

QTY 1 1 1 1 2 2 2 2 1 1 4 4 4 1 1 1 1 1 1

PRICE $4.30 $4.30 $8.46 $7.09 $11.31 $11.31 $6.11 $5.83 $2.51 $1.53 $1.38 $0.42 $0.56 $1.03 $0.42 $2.11 $27.62 $8.95 $8.95

VAL VES

" End Plate " End Plate1" End Plate FKM (viton type) Valve Body O-Ring Upper Stem Bushing Thrust Washer

V10258A* Ball Seat

V07258A* Ball Seat

x 3" SS Body Bolt SS Lock Washer SS Nut

" x 3" SS Body Bolt " SS Lock Washer " SS Nut #10 x " SS Handle BoltSS Handle Washer FKM(viton type) Stem O-Ring Repair Kit

#10 x " SS Handle Bolt SS Handle Washer FKM(viton type) Stem O-Ring Repair Kit Straight Mounting Bracket 90 Mounting Bracket

REPLACEMENT PARTS V125FP-V150-V200ITEM 1 2 2 N/S 3 4 5 5 5 6 7 8 9 10 11 12 13 14 15 N/S PART NO V20151M V20153 V20353T V20353C V20254 V20256 V20257 V20267 V20264* V20159* V20060* V20017 V20018 V20019 V20020 V20021 V20163* V20200 Stem Handle T Handle 11 8" Plug for T-Handle (Cap Plug) Valve Body 2" End Plate 1" End Plate 1" Full Port End Plate FKM (viton type) Valve Body O-Ring Upper Stem Bushing Thrust Washer3 8" 3 8" 3 8"

DESCRIPTION

QTY 1 1 1 1 1 1 2 2 2 2 2 1 1 4 4 4 1 1 1 1

PRICE $8.62 $8.62 $8.62 $2.11 $12.08 $11.81 $12.58 $12.58 $12.58 $9.59 $9.59 $3.06 $2.11 $1.72 $0.42 $1.03 $0.84 $0.42 $2.64 $41.44

V20255A* Valve Ball

DIMENSION CHART IN INCHES (REFER TO DRAWING ABOVE)PART NO V050 V075 V100 V100FP V125 V125FP V150 V200 DESCRIPTION Full Port Valve Full Port Valve Standard Port Valve Full Port Valve Standard Port Valve Full Port Valve Full Port Valve Standard Port Valve A 3.44 3.44 3.44 4.19 4.19 4.72 4.72 4.72 B 3.37 3.37 3.37 3.31 3.31 5.90 5.90 5.90 C 2.06 2.06 2.06 2.44 2.44 2.70 2.70 2.70 D 1.25 1.25 1.25 1.81 1.81 1.92 1.92 1.92 E 2.50 2.50 2.50 3.50 3.50 3.50 3.50 3.50

V20258A* Ball Seat

x 4" SS Body Bolt SS Lock Washer 16 SS Hex Nut

" x " SS Handle BoltSS Handle Washer FKM(viton type) Stem O-Ring Repair Kit

*Valve repair kits contain items marked with asterisk : 1 Ball 2 Body O-Rings 1 Thrust Washer 2 Ball Seats 1 Upper Stem Bushing 1 Stem O-Ring

13

FEATURESVALVES

Polypropylene Bolted Ball Valves

FKM (viton type) seals. PTFE self-lubricating stem bushings and seats cannot stick or bind. Precision molded in polypropylene. Polypropylene is reinforced with fiberglass for additional strength. Self-aligning ball moves freely against the PTFE seats for smooth operation. Valve opens and closes with very little pressure on the handle. Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats. Stainless steel bolts.

6 BOLT VALVESPART NO V200FP V300 V300FP V400 DESCRIPTION 2" Full Port Valve 3" Standard Port Valve 3" Full Port Valve 4" Standard Port Valve MAX PSI 150 100 100 75 PIPE SIZE 2" 3" 3" 4" OPENING THRU BALL QTY 2" 8/box 2" 3" 3" PRICE $79.20

8/box $127.49 6/box $189.26 4/box $413.65

6 BOLT VALVES w/ F ADAPTERPART NO VFMT200FP MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 2" Full Port Valve w/F Adapter 150 2" 2" 6/box $92.09 DESCRIPTION 2" 6/box $92.09

VFMT200FPSH 2" Full Port Valve w/F Adapter 150 2"

VFMT200FP

FEATURES FOR LOCKING HANDLE Stainless steel hardware. Locks in open and closed positions. Locking handle replaces standard handle.** Padlock not included.*

(shown w/ long handle)

LOCKING HANDLE FEATURESPART NO VL25153* DESCRIPTION Locking Handle VALVE USED QTY PRICE V200FP, V300, V300FP, V400 1 $29.16 VFMT200FP & VFMT200FPSH

VL25153

**Sold separately. FEATURES FOR MOUNTING BRACKETS 316 Stainless steel construction. Straight and 90 available. V25270 V25271

MOUNTING BRACKETSPART NO V25270 V25271 VALVE USED QTY PRICE V300, V300FP, V400 1 $14.95 Straight Mounting Bracket V200FP, VFMT200FP & VFMT200FPSH V200FP, V300, V300FP, V400 1 $17.63 90 Mounting Bracket VFMT200FP & VFMT200FPSH DESCRIPTION

FEATURES FOR REMOVABLE HANDLE KIT Removable handle deters opening the valve for safety, vandalism and theft.

VRH220K

REMOVABLE HANDLE KITPART NO VRH220K DESCRIPTION Removable Handle Kit VALVE USED V200FP, V300 & V300FP QTY PRICE 1 $31.91

3 Piece Kit DIMENSION CHART IN INCHES (REFER TO DRAWING ON LEFT)PART NO V200FP V300 V300FP V400 VFMT200FP DESCRIPTION Full Port Valve Standard Port Valve Full Port Valve Standard Port Valve Full Port Valve A 3.25 3.53 4.25 4.50 3.38 3.38 B 2.38 2.69 3.25 3.60 2.38 2.38 C 5.44 6.28 7.35 8.19 5.44 5.44 D 9.25 9.25 9.25 9.25 9.25 5.25 E 5.50 6.06 6.40 7.88 8.30 8.30

VFMT200FPSH Full Port Valve

14

www.banjocorp.com

VALVES13 2 11 9 1 14 8 15

[email protected]

12

5

7

6

4

3

6 7

5

10

VAL VES

V200FP-VFMT200FP-VFMT200FPSH-V300-V300FP-V400ITEM 1 2 8 9 11 12 13 14 15 N/S N/S PART NO V25151B V25153 V25160* V25060* V20018 V20019 V25020 V25121 V25163* V25271 V25270 Stem Handle Upper Stem Bushing Thrust Washer DESCRIPTION QTY 1 1 1 1 4 4 1 1 1 1 1 PRICE $13.20 $13.18 $4.16 $2.11 $0.42 $1.03 $1.72 $0.56 $3.61 $17.63 $14.95

REPLACEMENT PARTS

REPLACEMENT PARTS V300ITEM 3 4 5 6 7 10 N/S PART NO V30254 V30255* V30264 V30258A* V30265* V30017 V30200 Valve Body Valve Ball 3" End Plate Ball Seat FKM (viton type) Valve Body O-Ring3 8"

DESCRIPTION

QTY 1 1 2 2 2 6 1

PRICE $24.31 $22.56 $33.48 $12.64 $11.26 $3.48 $76.78

" SS Lock Washer3 8"

16 SS Hex Nut

x 5" SS Body Bolt

#10 x " SS Handle Bolt SS Handle Washer FKM (viton type) Stem O-Ring 90 Mounting Bracket Fits V150, V200, V200FP, V300 & V300FP Straight Mounting Bracket Fits V150, V200, V200FP, V300 & V300FP

Repair Kit

REPLACEMENT PARTS V300FPITEM 3 4 5 6 7 PART NO V35254 V35255A* V35264 V35258A* V35265* V35017 V35200 Valve Body Valve Ball 3" FP End Plate Ball Seat FKM (viton type) Valve Body O-Ring3 8"

DESCRIPTION

QTY 1 1 2 2 2 6 1

PRICE $33.67 $36.81 $47.93 $20.50 $13.76 $4.87 $140.96

V200FP-VFMT200FP-VFMT200FPSHITEM 2 3 4 5 5 5 6 7 10 N/S PART NO V25153SH V25254 V25255A* V25256 VMT25256 VF25256 V25258A* V25264* V25017 V25200 Valve Body Valve Ball 2" End Plate Female NPT 2" End Plate Male NPT 2" End Plate Male Adapter Ball Seat FKM (viton type) Valve Body O-Ring3 8"

REPLACEMENT PARTSDESCRIPTION

10 N/S QTY 1 1 1 2 1 1 2 2 6 1 PRICE $13.18 $16.39 $12.64 $18.48 $37.84 $37.84 $11.66 $9.81 $2.36 $54.54 ITEM 3 4 5&6 7 10 N/S

x 6" SS Body Bolt

Repair Kit

Short Handle for VFMT200FPSH

REPLACEMENT PARTS V400PART NO V40254 V40255* V40264 V40265* V40017 V40200 Valve Body Valve Ball End Plate w/PTFE Ball Seat FKM (viton type) Valve Body O-Ring3 8"

DESCRIPTION

QTY 1 1 2 2 6 1

PRICE $44.81 $47.93 $61.80 $16.68 $13.88 $162.90

x 4" SS Body Bolt Repair Kit

x 7" SS Body Bolt Repair Kit

1 Ball

*Valve repair kits contain items marked with asterisk : 2 Body O-Rings 1 Thrust Washer 2 Ball Seats 1 Upper Stem Bushing 1 Stem O-Ring

15

2" Full Port Polypropylene Bolted Ball ValvesFEATURESVALVES

FKM (viton type) seals. Stainless steel bolts. PTFE self-lubricating stem bushings and seats cannot stick or bind. Precision molded in polypropylene. Polypropylene is reinforced with fiberglass for additional strength. Self-aligning ball moves freely against the PTFE seats for smooth operation. Valve opens and closes with very little pressure on the handle. Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats. Maximum operating pressure 150 P.S.I. @ 70F & 75 P.S.I.@ 150F.

4 BOLT FULL PORT VALVESPART NO V204FP DESCRIPTION 2" Full Port Valve Full Port Valve Male NPT x VFMT204FP 2" Male Adapter MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 2" 2" 8/box $75.08 150 2" 2" 6/box $83.93

2" Full Port ANSI Flange Bolted Ball ValvesFEATURES 100% PTFE seats. FKM (viton type) seals. Glass-filled polypropylene. Unique compact design. Lightweight. Maximum operating pressure 100 P.S.I. @ 70F & 75 P.S.I.@ 150F.

FULL PORT ANSI FLANGE VALVESPART NO DESCRIPTION MAX PIPE OPENING QTY PSI SIZE THRU BALL 2" 2" PRICE Full Port Valve Male Adapter 100 2" VSF200FPAF 2" x 2" ANSI Flange Full Port Valve Male NPT x 100 2" VSMT200FPAF 2" x 2" ANSI Flange 6/box $175.65 6/box $175.65

See our 2" ANSI flange gaskets on page 101!

16

www.banjocorp.com

VALVES

[email protected]

2 4 12 13 11 3

6

10

9

7

1

7

5

14

8

VAL VES

REPLACEMENT PARTS VFMT204FPITEM 1 2 3 4 5 6 7 8 9 10 11 11 12 13 14 15 PART NO V25254 V25160 V25264 V25258A V20019 V25020 V25017 V25060 V20018 V25255A VF25356 VMT25356 V25163 V25151B V25121 V25153 DESCRIPTION 2" FP Valve Body Upper Stem Bushing FKM (viton type) Body O-Ring 2" FP Ball Seat3 8"

REPLACEMENT PARTS VSF200FPAFQTY 1 1 2 2 4 1 4 1 4 1 1 1 1 1 1 1 PRICE $16.39 $4.16 $9.81 $11.66 $1.03 $1.72 $2.36 $2.11 $0.42 $12.64 $31.26 $31.26 $3.61 $13.20 $0.56 $13.18 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO V25255A V25020 VS25151B V25121 VF25256 V20019 V25258A V20010 V25264 V25245 V25153SH V25160 V25163 V20018 2" FP Ball3 8"

DESCRIPTION x " Handle Bolt

QTY 1 1 1 1 1 6 2 6 1 1 1 1 1 6

PRICE $12.64 $1.72 $13.18 $0.56 $37.84 $1.03 $11.66 $1.03 $9.81 $73.59 $13.18 $4.16 $3.61 $0.42

Stem Handle Washer 2" FP "F" End Plate3 8"-16

16 SS Hex Nut x " Handle Bolt x 4" SS Body Bolt SS Lock Washer

3 8" 3 8" 3 8"

SS Hex Nut x 2" HHCS

2" FP Ball Seat3 8"-16

Thrust Bushing 2" Ball 2" End Plate Male Adapter 2" MPT End Plate FKM (viton type) Stem O-Ring Stem Handle Washer Handle

FKM (viton type) Body O-Ring 2" FP ANSI Flange Valve Body Handle Upper Stem Bushing FKM (viton type) Stem O-Ring3 8"

SS Lock Washer

REPLACEMENT PARTS V204FPITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO V25254 V25160 V25264 V25258A V20019 V25020 V25017 V25060 V20018 V25255A V25456 V25163 V25151B V25121 V25153 DESCRIPTION 2" FP Valve Body Upper Stem Bushing FKM (viton type) Body O-Ring 2" FP Ball Seat3 8"

REPLACEMENT PARTS VSMT200FPAFQTY 1 1 2 2 4 1 4 1 4 1 2 1 1 1 1 PRICE $16.39 $4.16 $9.81 $11.66 $1.03 $1.72 $2.36 $2.11 $0.42 $12.64 $18.48 $3.61 $13.20 $0.56 $13.18 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO V25255A V25020 VS25151B V25121 VMT25256 V20019 V25258A V20010 V25264 V25245 V25153SH V25160 V25163 V20018 2" FP Ball Handle Bolt Stem Handle Washer 2" FP Male Thread End Plate3 8"-16

DESCRIPTION

QTY 1 1 1 1 1 6 2 6 1 1 1 1 1 6

PRICE $12.64 $1.72 $13.18 $0.56 $37.84 $1.03 $11.66 $1.03 $9.81 $73.59 $13.18 $4.16 $3.61 $0.42

16 SS Hex Nut x " Handle Bolt x 4" SS Body Bolt SS Lock Washer

3 8" 3 8" 3 8"

SS Hex Nut x 2" HHCS

2" FP Ball Seat3 8"-16

Thrust Bushing 2" Ball 2" Full Port End Plate FKM (viton type) Stem O-Ring Stem Handle Washer Handle

FKM (viton type) Body O-Ring 2" FP ANSI Flange Valve Body Handle Upper Stem Bushing FKM (viton type) Stem O-Ring3 8"

SS Lock Washer

17

VALVES

2" Standard Port Ball Valves Stubby Valve PATENTED

FEATURES Stainless steel bolts. Glass filled polypropylene. Multiple design options. Unique patented compact design. Lightweight. Maximum operating pressure 100 P.S.I. @ 70F & 75 P.S.I. @ 150F. All PTFE seals

VSF200

VSMT200

VSFMT200

VSFHB200

2" STANDARD PORT STUBBY VALVESPART NO VSF200 VSMT200 MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 1" 2" Male Adapter x 2" Female NPT 100 2" 24/box $61.91 DESCRIPTION 2" Male NPT x 2" Female NPT 100 2" 100 2" 100 2" 1" 1" 1" 24/box $61.91 24/box $65.88 24/box $68.64 A

VSFMT200 2" Male Adapter x 2" Male NPT VSFHB200 2" Male Adapter x 2" Hose Barb

B

C

DIMENSION CHART IN INCHES (REFER TO DRAWING ABOVE)PART NO VSF200 VSMT200 VSFMT200 VSFHB200 DESCRIPTION 2" Male Adapter x 2" Female NPT 2" Male NPT x 2" Female NPT 2" Male Adapter x 2" Male NPT 2" Male Adapter x 2" Hose Barb A 4.38 4.38 4.38 4.38 B 4.72 4.50 5.88 6.90 C 3.56 3.56 3.56 3.56

18

www.banjocorp.com

VALVES9 11 4 2 3 10

[email protected]

7 6

5

12

14

13

12

1

8

VAL VES

*Valve repair kits contain items marked with asterisk:1 Ball 2 Ball Seats 1 Upper Stem Bushing 1 Body Gasket 1 Thrust Bearing

NOTE: End plates and body style may vary from picture.

REPLACEMENT PARTS VSF200-VSMT200-VSFMT200-VSFHB200ITEM 2 3 4 6 7 8 9 10 11 12 13 14 N/S PART NO V20021 V20020 V20018 V20019 V20010SS V20060* V20060* VS20151 VS20258A* VS20255* V21204* VS20200 DESCRIPTION Handle Washer Handle Bolt Lock Washer3 8"

REPLACEMENT PARTS VSF200-VSFMT200ITEM 1 5 PART NO VF20254 2" F Body DESCRIPTION QTY 1 1 PRICE $20.83 $26.04

QTY 1 1 1 4 4 4 1 1 1 2 1 1 1

PRICE $8.62 $0.42 $0.84 $0.42 $1.03 $1.03 $2.11 $2.11 $9.59 $9.59 $10.41 $4.33 $46.51

VS20152SH 2" Short Style Handle

VSMT20256 2" Male NPT End Plate

16 SS Hex Nut

SS Body Bolt Upper Stem Bushing Thrust Bearing Stem Seat Ball Body Gasket Repair Kit

REPLACEMENT PARTS VSFHB200ITEM 1 5 PART NO VF20254 2" F Body DESCRIPTION QTY 1 1 PRICE $20.83 $26.45

VSHB20256 2" Hose Barb End Plate

REPLACEMENT PARTS VSMT200ITEM 1 5 PART NO VS20256 DESCRIPTION 2" Female End Plate QTY 1 1 PRICE $20.83 $12.58 VSMT20254 2" Male NPT Body

19

VALVES

FEATURES

2" Full Port Ball Valves Stubby Valve PATENTED

Stainless steel bolts. 100% PTFE ball seats. Glass-filled polypropylene. FKM (viton type) body seals. Unique compact design. 100 P.S.I. @ 70F and 75 P.S.I.@ 150F. Lightweight. VSMT204FP

VSF204FP

VS204FP

VSFMT204FP

VSFMT204HSFPA

B

C

2" FULL PORT STUBBY VALVESPART NO VSMT204FP VSF204FP VS204FP VSFMT204FP DESCRIPTION MAX PIPE OPENING PSI SIZE THRU BALL QTY 2" 2" 2" 2" 2" PRICE 2" Male NPT x 2" Female NPT 100 2" 2" Male Adapter x 2" Female NPT 100 2" 2" Female NPT x 2" Female NPT 100 2" 18/box $74.74 18/box $74.74 18/box $74.74 18/box $74.74 18/box $196.22

DIMENSION CHART IN INCHES (REFER TO DRAWING ABOVE)PART NO VSMT204FP DESCRIPTION A 6.38 5.94 6.38 6.38 6.38 B 5.72 6.50 5.91 5.19 6.50 C 4.25 4.25 4.25 4.25 4.25 2" Male NPT x 2" Female NPT 2" Male Adapter x 2" Male NPT VSMT204HSFP w/ SS Ball, Stem & handle VSF204FP 2" Male Adapter x 2" Female NPT VS204FP VSFMT204FP 2" Female NPT x 2" Female NPT 2" Male Adapter x 2" Male NPT

2" Male Adapter x 2" Male NPT 100 2" 2" FP Male Adapter x 2" Male VSFMT204HSFP NPT w/ SS Ball, Stem & Handle 100 2"

20

www.banjocorp.com

VALVES12 3 10 11

4

[email protected]

7

2DESCRIPTION 2" FPEnd Plate Stem 2" FP Stubby Handle 2" FP Stubby Ball3 8" 3 8" 3 8"

6

5

13

6

1

8

9

VSMT204FP-VSF204FP-VS204FP-VSFMT204FPITEM 2 3 4 5 6 7 8 9 10 11 12 13 PART NO VSMT25356 VS20151 VS25153 VS25255 V20010SS V20018 V20019 V20020 V20021 V20060 V25214V QTY 1 1 1 1 2 4 4 4 1 1 2 1 PRICE $18.48 $9.59 $13.18 $12.64 $5.56 $1.03 $0.42 $1.03 $0.84 $0.42 $2.11 $5.40

REPLACEMENT PARTS


15 14 9 7 4 12

VAL VES

VS25258AR1 2" FP Stubby Seat - 16 x 2" SSBolt SS Lock Washer 16 SS Hex Nut

Retaining Bearing Handle Washer PFTEBearing Gasket FKM (viton type) Body Seal

6 3 2

416

11

10

11 5

13

1

REPLACEMENT PARTS VSMT204FPITEM 1 2 PART NO VFT25254 DESCRIPTION 2" FP Stubby Female NPT Body QTY 1 1 PRICE $18.48 $18.48

8

VSMT25356 2" FPStubby MPT End Plate

REPLACEMENT PARTS VSFMT204HSFP REPLACEMENT PARTS VSFMT204FPITEM 1 2 PART NO VFT25254 VS25356 DESCRIPTION 2" FP Stubby Female NPT Body 2" FPStubby Female NPT End Plate QTY 1 1 PRICE $18.48 $18.48 ITEM 1 2 3 4 5 6 7 8 QTY 1 1 PRICE $17.35 $18.48 9 10 11 12 13 14 15 QTY 1 1 PRICE $17.35 $18.48 16 PART NO V20010SS V20018 V20019 V20060 V25214V VF25254 VS20101SS VS20151SS VS25153SS VS25255SS VS25258AR1 VS20102SS VSMT25356 VSS15020 VS20021 VS201633 8" 3 8" 3 8"

DESCRIPTION - 16 x 2" SSBolt SS Lock Washer 16 SS Hex Nut

QTY 4 4 4 2 1 1 1 1 1 1 2 1 1 1 1 2

PRICE $1.03 $0.42 $1.03 $2.11 $5.40 $17.35 $29.75 $39.05 $30.83 $74.62 $5.56 $14.42 $18.48 $2.26 $1.34 $1.79

PFTEBearing Gasket FKM (viton type) Body Seal 2" Full Port Male Adapter Body SS Handle Stop SS Stem SS Handle 2" FP SS Ball 2" FP Stubby Seat SS Handle Lock 2" FPStubby MPT End Plate SS Handle Nut Washer FKM (viton type) O-ring

REPLACEMENT PARTS VSF204FPITEM 1 2 PART NO VF25254 VS25356 DESCRIPTION 2" FP Stubby Male Quick Connect Body 2" FPStubby Female NPT End Plate

REPLACEMENT PARTS VS204FPITEM 1 2 PART NO VF25254 DESCRIPTION 2" FP Stubby Male Quick Connect Body

VSMT25356 2" FPStubby MPT End Plate

21

VALVES

FEATURES

3" Standard Port Ball Valves Stubby Valve PATENTED

Stainless steel bolts. Glass filled polypropylene. FKM (viton type) body seals. Three design options for standard and one for full port. Unique patented compact design. 100 P.S.I. @ 70F and 75 P.S.I.@ 150F. Lightweight. All PTFE ball seats.

VSMT300

VSF300

VSFMT300

3" STANDARD PORT STUBBY VALVESPART NO VSMT300 VSF300 DESCRIPTION 3" Female NPT x 3" Male NPT MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 100 3" 2" 6/box $159.09 2" 2" 6/box $152.77 6/box $152.77C D

3" Female NPT x 3" Male Adapter 100 3" 100 3"

VSFMT300 3" Male NPT x 3" Male Adapter

A E B

DIMENSION CHART IN INCHES (REFER TO DRAWING ABOVE)PART NO VSMT300 VSF300 VSFMT300 DESCRIPTION 3" Female NPT x 3" Male NPT 3" Male NPT x 3" Male Adapter A B C* D E 3.63 2.84 5.25/9.25 4.60 5.09 3.63 2.84 5.25/9.25 4.60 7.84

3" Female NPT x 3" Male Adapter 3.63 2.84 5.25/9.25 4.60 5.65

*Short handles: Add SH to end of part number. Dimension C = 5.25"

22

www.banjocorp.com

VALVES

[email protected]


10 11 7 12

8 9 14 4 13 4 3 2 6 5

1VAL VES

REPLACEMENT PARTS VSMT300-VSF300-VSFMT300ITEM 3 4 5 6 7 8 9 10 11 12 13 14 PART NO VS25151B VS30258* V20010SS V20018 V20019 V25020 V25121 V25153 V25160* V25163* VS30255* V30265* Short Stem 3" Stubby Seat3 8" 3 8" 3 8"

REPLACEMENT PARTS VSFMT300PRICE $13.18 $4.45 $1.03 $0.42 $1.03 $1.72 $0.56 $13.18 $4.16 $3.61 $21.48 $11.26 ITEM 1 2 PART NO VS30254 ITEM 1 2 PART NO VSF30264 DESCRIPTION 3" Stubby F End Plate QTY 1 1 PRICE $31.87 $27.06 VSMT30254 3" MPT Stubby Body

DESCRIPTION

QTY 1 2 6 6 6 1 1 1 1 1 1 1

- 16 x 2" SS Bolt SS Lock Washer 16 SS Hex Nut x " Handle Bolt

3 8"

Handle Washer Handle-Straight Upper Stem Bushing FKM (viton type) Stem O-Ring 3" Ball FKM (viton type) Body O-Ring

REPLACEMENT PARTS VSMT300DESCRIPTION 3" Stubby Body QTY 1 1 PRICE $31.87 $33.06

VSMT30264 3" Stubby Male NPT End Plate

REPLACEMENT PARTS VSF300ITEM 1 2 PART NO VS30254 VSF30264 DESCRIPTION 3" Stubby Body 3" Stubby F End Plate QTY 1 1 PRICE $31.87 $27.06

*Valve repair kits contain items marked with asterisk : 1 Ball 2 Body O-Rings 2 Ball Seats 1 Upper Stem Bushing 1 Stem O-Ring

23

VALVES

FEATURES

3" Full Port Ball Valves 3" Stubby Valve PATENTED

Stainless steel bolts. Glass filled polypropylene. FKM (viton type) body seals. Three design options for standard and one for full port. Unique patented compact design. 100 P.S.I. @ 70F and 75 P.S.I.@ 150F. Lightweight. All PTFE ball seats.

VSFMT300FP

VSFMT300HSFP

3" FULL PORT PORT STUBBY VALVESMAX PIPE OPENING QTY PRICE PART NO DESCRIPTION PSI SIZE THRU BALL VSFMT300FP 3" FP Male Adapter x 3" Male NPT 100 3" 3" 6/box $193.42 PART NO

3" FULL PORT STUBBY VALVES w/SSDESCRIPTION 3" FP Male Adapter x 3" Male VSFMT300HSFP NPT w/SS ball, Stem & Handle 100 3" MAX PIPE OPENING QTY PSI SIZE THRU BALL 3" PRICE 6/box $367.71

NEW

C

D

A E B

DIMENSION CHART IN INCHES (REFER TO DRAWING ABOVE)PART NO VSFMT300FP DESCRIPTION A B C* 7.31 7.31 D E 3" FP Male Adapter x 3" Male NPT 9.25 8.19 3" FP Male Adapter x 3" Male VSFMT300HSFP NPT w/SS ball, Stem & Handle 9.88 8.19 0.91 7.34 0.88 7.31

*Short handles: Add SH to end of part number. Dimension C = 5.25"

24

www.banjocorp.comD

VALVES8

7

6

5

4

3

[email protected] 17

10 11 7 12

8 9C

12 13 1

14

4

13 4

3

2 6

5

2

4

14

B

17

9 5 16 11

10

5 6 8

A

THIS DR INFORM ARE THE BANJO C

UNLESS DRAWIN THIS DR CHANGE8 7 6 5 4 3

VAL VES

REPLACEMENT PARTS VSMFT300FPITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO VSF35254 VSMT35256 VS25151B VS35258 V20010SS V20018 V20019 V25020 V25121 V25153 V25160* V25163* V35255A V35265 DESCRIPTION 3" FP Stubby F Body 3" FP Stubby Male NPT End Plate Short Stem 3" FP Stubby Seat3 8" 3 8" 3 8"

REPLACEMENT PARTS VSFMT300HSFPQTY 1 1 1 1 6 6 6 1 1 1 1 1 1 1 PRICE $50.61 $46.30 $13.18 $22.66 $1.03 $0.42 $1.03 $1.72 $0.56 $13.18 $4.16 $3.61 $36.81 $13.76 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO V20018 V20019 V25163 V25160 VS35258 V35265 VSF35254 V20010SS V35255ASS VS30151SS VS30153SS VS30101SS VS30102SS VSS30020 V25060 VS300213 8" 3 8"

DESCRIPTION SS Lock Washer 16 SS Hex Nut

QTY 6 6 1 1 2 1 1 1 6 1 1 1 1 1 1 1 1

PRICE $0.42 $1.03 $3.61 $4.16 $22.66 $13.76 $50.61 $46.30 $1.03 $131.84 $52.53 $44.29 $31.93 $11.85 $4.22 $2.11 $4.22

FKM (viton type) Stem O-Ring Upper Stem Bushing 3" FP Stubby Seat FKM (viton type) Valve Body O-Ring 3" FP Stubby F Body3 8"

- 16 x 2" SS Bolt SS Lock Washer 16 SS Hex Nut x " Handle Bolt

3 8"

VSMT35256 3" FP Stubby MPT End Plate - 16 x 2" SS Bolt 3" FP SS Ball SS Stem SS Handle SS Handle Stop SS Handle Lock

Handle Washer Handle-Straight Upper Stem Bushing FKM (viton type) Stem O-Ring 3" Ball FKM (viton type) Body O-Ring

"-16 SS Jam NutThrust Washer Washer

25

FEATURES VALVES

3-Way Poly Ball Valves

Stainless steel bolts. Precision molded in polypropylene. Polypropylene is reinforced with fiberglass for additional strength. Self-aligning ball moves freely against the PTFE seats for smooth operation. Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats. PTFE self-lubricating stem bushings and seats. Maximum operating pressure 100 P. S.I. FKM (viton type) seats.

V075BL V100BL

V125BL V150BL

V200BL

3 WAY BOTTOM LOAD VALVESHANDLE QTY MAX PIPE OPENING PRICE PART NO DESCRIPTION TYPE PSI SIZE THRU BALL V075BL " 3-Way Bottom Load Poly Valve 100 " 1" T 18/box $57.29 V100BL 1" 3-Way Bottom Load Poly Valve 100 1" 1" 1" 1" 2" 2" T T T T 18/box $57.29 12/box $74.09 12/box $74.09 8/box $113.06 V125BL 1" 3-Way Bottom Load Poly Valve 100 1" V150BL 1" 3-Way Bottom Load Poly Valve 100 1" V200BL 2" 3-Way Bottom Load Poly Valve VT200BL 2" 3-Way Bottom Load Poly Valve 100 2" 100 2"

BOTTOM LOAD: Directional flow, right orleft. Valve can be turned off to stop flow.

Straight 8/box $113.06

V075SL V100SL 3 WAY SIDE LOAD VALVESPART NO V075SL V100SL V125SL V150SL V200SL DESCRIPTION

V125SL V150SL

V200SL VT200SL

" 3-Way Side Load Poly Valve1" 3-Way Side Load Poly Valve

HANDLE QTY MAX PIPE OPENING PRICE TYPE PSI SIZE THRU BALL 100 " 1" Straight 18/box $57.29 100 100 1" 1" 1" 1" 1" 1" 2" 2" Straight 18/box $57.29 T T T T 18/box $58.43 12/box $74.09 12/box $74.09 8/box $113.06

SIDE LOAD: Directional flow, right or left.Valve cannot be turned off.

VT100SL 1" 3-Way Side Load Poly Valve

1" 3-Way Side Load Poly Valve 100 1" 1" 3-Way Side Load Poly Valve 100 1" 2" 3-Way Side Load Poly Valve 100 100 2" 2"

Straight 8/box $113.06

VT200SL 2" 3-Way Side Load Poly Valve

26

www.banjocorp.com4 3 8 9 7

VALVES8 3 2

[email protected]

9

2

7

6 2

6 2 10 10 5

NOTE: Handle style will vary from picture.

6 10 5 1

6 10

1

Bottom Load 3-Way Poly Ball ValvesREPLACEMENT PARTS V075BL-V100BLITEM 1 1 2 2 3 4 5 6 7 8 9 10 PART NO V07354B V10354B V07357 V10257 V10151A V10353TB V10355B V10258 V10060 V10159 V10163 V10264 1" Valve Body DESCRIPTION QTY 1 1 2 2 1 1 1 2 1 1 1 2 PRICE $10.41 $10.62 $11.31 $11.31 $4.30 $4.30 $7.09 $6.11 $1.53 $2.51 $2.11 $5.83

Side Load 3-Way Poly Ball ValvesREPLACEMENT PARTS V075SL-V100SL-VT100SLITEM 1 1 2 2 3 4 4 5 6 7 8 9 10 PART NO V07354S V10354S V07357 V10257 V10151A V10153A V10353TS V10355S V10258 V10060 V10159 V10163 V10264 1" Valve Body DESCRIPTION QTY 1 1 2 2 1 1 1 1 2 1 1 1 2 PRICE $10.62 $10.62 $11.31 $11.31

" Valve Body " End Plate1" End Plate Stem Handle -T Ball Seats Thrust Bushing Upper Stem Bushing FKM (viton type) Stem O-Ring FKM (viton type) Body O-Ring

" Valve Body " End Plate1" End Plate Stem Handle -Straight Handle-T Ball Seats Thrust Bushing Upper Stem Bushing FKM (viton type) Stem O-Ring FKM (viton type) Body O-Ring

VAL VES

$4.30 $4.30 $4.30 $7.09 $6.11 $1.53 $2.51 $2.11 $5.83

REPLACEMENT PARTS V125BL-V150BLITEM 1 1 2 2 3 4 5 6 7 8 9 10 PART NO V20344B V20354B V20267 V20257 V20151M V20353TB V20355B VE20258A V20060 V20159 V20163 V20264 DESCRIPTION 1" Valve Body 1" Valve Body 1" End Plate 1" End Plate Stem Handle -T Ball Seats Thrust Bushing Upper Stem Bushing FKM (viton type) Stem O-Ring FKM (viton type) Body O-Ring QTY 1 1 2 2 1 1 1 2 1 1 1 2 PRICE $15.61 $15.61 $12.58 $12.58 $8.62 $8.62 $11.81 $10.43 $2.11 $3.06 $2.64 $9.59 ITEM 1 1 2 2 3 4 4 5 6 7 8 9 10 V20344S V20354S V20267 V20257 V20151M

REPLACEMENT PARTS V125SL-V150SLPART NO DESCRIPTION 1" Valve Body 1" Valve Body 1" End Plate 1" End Plate Stem Handle -T Handle-Straight Ball Seats Thrust Bushing Upper Stem Bushing FKM (viton type) Stem O-Ring FKM (viton type) Body O-Ring QTY 1 1 2 2 1 1 1 1 2 1 1 1 2 PRICE $15.61 $15.61 $12.58 $12.58 $8.62 $8.62 $8.62 $11.81 $10.43 $2.11 $3.06 $2.64 $9.59

V20353TS V20153 V20355S VE20258A V20060 V20159 V20163 V20264

REPLACEMENT PARTS V200BL-VT200BLITEM 1 2 3 4 4 5 6 7 8 9 10 PART NO V25354B V25356 V25151B V25353B V25353TB V25355B V25258 V25060 V25160 V25163 V25264 2" Valve Body 2" End Plate Stem Handle-Straight Handle -T Ball Seats Thrust Bushing Upper Stem Bushing FKM (viton type) Stem O-Ring FKM (viton type) Body O-Ring DESCRIPTION QTY 1 2 1 1 1 1 2 1 1 1 2 PRICE $16.39 $18.48 $13.20 $13.18 $13.18 $15.41 $11.66 $2.11 $4.16 $3.61 $9.81 ITEM 1 2 3 4 4 5 6 7 8 9 10 PART NO V25354S V25356 V25151B V25153SH V25353TS V25355S V25258 V25060 V25160 V25163 V25264

REPLACEMENT PARTS V200SLDESCRIPTION 2" Valve Body 2" End Plate Stem Handle-Straight Handle -T Ball Seats Thrust Bushing Upper Stem Bushing FKM (viton type) Stem O-Ring FKM (viton type) Body O-Ring QTY 1 2 1 1 1 1 2 1 1 1 2 PRICE $16.39 $18.48 $13.20 $13.18 $13.18 $15.41 $11.66 $2.11 $4.16 $3.61 $9.81

27

Polypropylene Nozzle ValvesVALVES

FEATURES Lightweight hose end valve for convenient transfer of liquids into drums, tanks, etc. Angled end flange with 8" long polypropylene fill spout. All stainless bolts.

1" & 2"

2" Full Port

VA150 VA200/150 VA200

VA200FP

1" & 2" POLY NOZZLE VALVES W/90 ELBOWPART NO VA150 VA200 DESCRIPTION 1" Nozzle Valve w/90 Elbow 2" Nozzle Valve w/90 Elbow MAX PIPE OPENING FEMALE QTY PRICE PSI SIZE THRU BALL NPT 150 1"x 8" 1" 1" 12/box $67.71 1" 1" 2" 2"x1" 12/box $67.71 2" 2" 12/box $67.71 6/box $101.29 150 2" x 8" 150 2" x 8"

VA200/150 2" x 1" Nozzle Valve w/90 Elbow 150 1"x 8" VA200FP 2" FP Nozzle Valve w/90 Elbow

FEATURES Lightweight hose end valve for convenient transfer of liquids into drums, tanks, etc. Angled end flange with 8" long polypropylene fill spout. All stainless bolts.

1"

1"

VA100

UVA100FP

1" POLY NOZZLE VALVES W/45 ELBOWMAX PIPE OPENING FEMALE QTY PRICE PSI SIZE THRU BALL NPT VA100 1" Nozzle Valve w/45 Elbow 150 1" 1" 24/box $46.32 " UVA100FP 1" FP EPDM Nozzle Valve w/45 Elbow 100 1" 1" 1" 1 $39.72 PART NO DESCRIPTION

Poly Dispensing NozzleFEATURES Glass filled polypropylene. 304 stainless steel handle, spring and pin. FKM (viton type) rubber parts only. Resists corrosion. 75 P. S.I. Maximum.

1"

VN100 1" POLY DISPENSING NOZZLEPART NO VN100 DESCRIPTION 1" Poly Dispensing Nozzle MAX PIPE OPENING FEMALE QTY PRICE PSI SIZE THRU BALL NPT 75 1" N/A 1" 1 $72.24

28

www.banjocorp.com

VALVES

[email protected]

REPLACEMENT PARTS VA150-VA200-VA200/150PART NO V20151M V20152 V20254 V20255A* V20256 V20257 V20258A* V20264* V20159* V20060* V20261 V20262 V20163* V20166 V25165 V20017 V20018 V20019 V20020 V20021 V20200 Stem Red Angle Handle Body Ball 2" FPT End Plate 1" End Plate Ball Seat FKM (viton type) Body O-RIng Upper Stem Bushing Thrust Washer 2" FP Angle End Flange 1" FP Angle End Flange FKM (viton type) Stem O-Ring 1" x 8" Nozzle Pipe 2" x 8" Nozzle Pipe3 8" 3 8" 3 8"

REPLACEMENT PARTS VA200FPPRICE $8.62 $8.62 $12.08 $11.81 $12.58 $12.58 $9.59 $9.59 $3.06 $2.11 $26.04 $26.04 $2.64 $6.66 $7.09 $1.72 $0.42 $1.03 $0.84 $0.42 $41.44 PART NO V25151B V25152 V25254 V25255A* V25256 V25261 V25258A* V25264* V25160* V25060* V25163* V25017 V20018 V20019 V25020 V25121 V25165 V25200 Stem Red Angle Handle Body Ball 2" FPT End Plate 2" FP Angle End Flange Ball Seat FKM (viton type) Body O-RIng Upper Stem Bushing Thrust Washer FKM (viton type) Stem O-Ring3 8" 3 8" 3 8"

DESCRIPTION

QTY 1 1 1 1 2 2 2 2 1 1 1 1 1 1 1 4 4 4 1 1 1

DESCRIPTION

QTY 1 1 1 1 2 1 2 2 1 1 1 6 6 6 1 1 1 1

PRICE $13.20 $13.18 $16.39 $12.64 $18.48 $40.69 $11.66 $9.81 $4.16 $2.11 $3.61 $2.36 $0.42 $1.03 $1.72 $0.56 $7.09 $54.54

x 4" SS Bolt SS Lock Washer 16 SS Hex Nut x " Handle Bolt

3 8"

VAL VES

x 4" SS Bolt SS Lock Washer 16 SS Hex Nut x " Handle Bolt

S.S. Handle Washer 2" x 8" Nozzle Pipe Repair Kit

3 8"

S.S. Handle Washer Repair Kit

REPLACEMENT PARTS UVA100FPPART NO UV10150 DESCRIPTION 1" Union End Cap 1" Union Stem 1" Union Handle 1" Union Stem EPDM O-Ring 1" Union Valve Body 1" Union Valve Seat 1" Union End Plate 1" Union Valve Seat 1" Union Body EPDM O-Ring 1" Poly Nozzle Pipe QTY 1 1 1 2 1 1 1 2 1 1 PRICE $5.64 $4.90 $4.90 $1.51 $6.73 $6.73 $4.90 $3.97 $2.81 $13.54

REPLACEMENT PARTS VA100PART NO V07151A V10153A V07254 V07155* V07256 V07258A* V07264* V07159* V07060* V07163* V07017 V07018 V07019 V10020A V07021A V10161 V07200 Stem Handle Body Ball 1" End Plate Ball Seat FKM (viton type) Body O-RIng Upper Stem Bushing Thrust Washer FKM (viton type) Stem O-Ring DESCRIPTION QTY 1 1 1 1 2 2 2 1 1 1 4 4 4 1 1 1 1 PRICE $3.76 $4.30 $8.17 $6.47 $9.42 $4.78 $4.78 $2.29 $2.29 $1.46 $1.12 $0.42 $0.42 $1.03 $0.42 $13.54 $23.08

UV10151 UV10153 UV10163 UV10254 UV10255 UV10256 UV10258 UV10264 V10161

" x 4" SS Bolt " SS Lock Washer " SS Body Nut #10 x 1" SS Handle BoltS.S. Handle Washer 1" Poly Nozzle Pipe Repair Kit

REPLACEMENT PARTS VN100PART NO VN10253 VN10254 VN10263* VN10264* VN10265* VN10269 VN10270* VN10271* DESCRIPTION 1" Valve Nozzle Handle 1" Valve Nozzle Body 1" Valve Nozzle Stem O-Ring 1" Valve Nozzle Body O-Ring Snap Ring for Valve Nozzle 1" Valve Nozzle Plug 1" Valve Nozzle Poppet 1" Valve Nozzle Gasket 1" Valve Nozzle Pin 1" Valve Nozzle Spring Repair Kit (Includes asterick * items) QTY 1 1 2 1 1 1 1 1 1 1 1 PRICE $6.25 $20.97 $1.12 $1.94 $1.26 $2.11 $2.11 $5.42 $6.25 $6.52 $24.37

*Valve repair kits contain items marked with asterisk : 1 Ball 2 Ball Seats 2 Body O-Rings 1 Thrust Washer 1 Upper Stem Bushing 1 Stem O-Ring

VN10273 VN10274* VN10200

29

Single Union Polypropylene Ball ValveVALVES

FEATURES Precision molded in glass reinforced polypropylene, for strength and chemical resistance. PTFE seats for smooth operation and proper sealing characteristics. EPDM O-rings to handle most fertilizers and many chemicals. Double O-rings in stem area for extra sealing protection. Interlocking body and end plate to allow easy thread connection when installing valves. Maximum operating pressure 100 P. S.I. at 70F.

SINGLE UNION POLY VALVESPART NO SUV050FP SUV075FP SUV100FP SUV125FP SUV150FP SUV200FP DESCRIPTION

" Full Port Union Valve " Full Port Union Valve1" Full Port Union Valve 1" Full Port Union Valve 1" Full Port Union Valve 2" Full Port Union Valve

MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 100 " 1 $19.88 " 100 100

"1"

"1" 1" 1" 2"

1 1 1 1 1

$19.88 $24.84 $42.67 $42.39 $53.80

100 1" 100 100 1" 2"

Spin Weld Polypropylene Ball ValveFEATURES One piece construction. Precision molded in durable polypropylene, for strength and chemical resistance. PTFE seats for smooth operation and proper sealing characteristics. Quality with economy. Maximum operating pressure 150 P. S.I. at 70F. Handle closes in either direction.

SPINWELD POLY VALVESPART NO WV050FP WV050FPB WV075FP WV075FPB WV100FP WV125FP WV150FP WV200FP DESCRIPTION

" Poly Spinweld Valve " BSP Poly Spinweld Valve " Poly Spinweld Valve " BSP Poly Spinweld Valve1" Poly Spinweld Valve 1" Poly Spinweld Valve 1" Poly Spinweld Valve 2" Poly Spinweld Valve

STEM MAX PIPE OPENING QTY PRICE O-RING PSI SIZE THRU BALL EPDM 150 " " 1 $17.96 EPDM 150 EPDM 150 EPDM 150

" " "

" " "1" 1" 1" 1" 1" 1" 2" 2"

1 1 1 1 1 1 1 1 1 1 1

$17.96 $17.96 $17.96 $22.46 $22.46 $38.64 $38.64 $38.64 $38.64 $48.65 $48.65

EPDM 150 1" EPDM 150 1" EPDM 150 1" EPDM 150 1" EPDM 150 2" EPDM 150 2"

WV100FPB 1" BSP Poly Spinweld Valve

WV125FPB 1" BSP Poly Spinweld Valve EPDM 150 1" WV150FPB 1" BSP Poly Spinweld Valve EPDM 150 1" WV200FPB 2" BSP Poly Spinweld Valve

SPINWELD POLY VALVESSTEM MAX PIPE OPENING O-RING PSI SIZE THRU BALL QTY PRICE 2" Male Adapter x 2" FKM WSFMT200 1 $53.07 1" Male NPT Standard Port (viton type) 150 2" 2" Male Adapter x 2" FKM 2" 1 $58.00 WSFMT200FP Male NPT Full Port (viton type) 150 2" PART NO DESCRIPTION

30

www.banjocorp.com

VALVES

[email protected]

Poly Air Actuated Shutoff ValvesFEATURES Open position allows full, unobstructed flow, 50-60 GPM. Air pressure collapses the internal rubber sleeve to provide positive shut off. Standard EPDM rubber bladder seal, FKM (viton type) available. Female NPT Threads. Maximum air pressure 100 P. S.I.

POLY PINCH VALVESPART NO PV075 PV075V PV100 PV100V PV100-075 PIPE PRESSURE GASKET MAX PSI SIZE DIFFERENCE QTY PRICE " x " Poly Pinch Valve EPDM 70 " 15 to 20 PSI 1 $86.48 DESCRIPTION

" Poly Pinch Valve1" x 1" Poly Pinch Valve

FKM (viton type) 70

"1" 1"

15 to 20 PSI 1 $140.65 15 to 20 PSI 1 $86.48 15 to 20 PSI 1 $140.65

EPDMFKM

70

Attention: The polypropylene air actuated valve is normally an open valve, and has a maximum liquid pressure of 70 P.S.I. The pressure differential (pressure it takes to close valve) of the valve is 15 to 20 P.S.I.

1" x 1" Poly Pinch Valve (viton type) 70 1" x " Poly Pinch Valve EPDMFKM

70 1"x " 15 to 20 PSI 1 $86.48

VAL VES

PV100-075V 1" x " Poly Pinch Valve (viton type) 70 1"x " 15 to 20 PSI 1 $140.65 1" x " Poly Pinch Valve EPDM 70 1"x " 15 to 20 PSI 1 $101.36 PV100-075B Female Coupler 1" x " Female Coupler FKM PV100-075BV Poly Pinch Valve (viton type) 70 1"x " 15 to 20 PSI 1 $148.24

4 2 5 3

1

1

REPLACEMENT PARTS PV075 - PV100 - PV100-075 - PV100-075BPV100V - PV100-075V - PV100-075BVDESCRIPTION Body ITEM 2 4 5 PART NO PV10254 12723 12724 QTY 1 1 1 PRICE $41.18 $1.93 $0.42

" Drain PlugEPDM O-Ring for Drain Plug

REPLACEMENT PARTS PV075ITEM 1 3 PART NO PV07257 PV10265 DESCRIPTION QTY 2 1 PRICE $13.49 $15.81 ITEM 1 3 PART NO PV07257 PV10265V

REPLACEMENT PARTS PV075VDESCRIPTION QTY 2 1 PRICE $13.49 $49.93

" End PlateEPDM Rubber Bladder Seal

" End PlateFKM (viton type) Rubber Bladder Seal

REPLACEMENT PARTS PV100 - PV100-075ITEM 1 1 3 PART NO PV07256 PV07257 PV10265 1" End Plate DESCRIPTION QTY 2 1 1 PRICE $13.49 $13.49 $15.81 ITEM 1 1 3

REPLACEMENT PARTS PV100V - PV100-075VPART NO PV07256 PV07257 PV10265V 1" End Plate DESCRIPTION QTY 2 1 1 PRICE $13.49 $13.49 $49.93

" End Plate (1 only)EPDM Rubber Bladder Seal

" End Plate (1 only)FKM (viton type) Rubber Bladder Seal

REPLACEMENT PARTS PV100-075BITEM 1 1 3 PART NO PV07256 PV07257B PV10265 1" End Plate DESCRIPTION QTY 2 1 1 PRICE $13.49 $32.82 $15.81 ITEM 1 1 3 PART NO PV07256 PV07257B PV10265V

REPLACEMENT PARTS PV100-075BVDESCRIPTION 1" End Plate QTY 1 1 1 PRICE $13.49 $32.82 $49.93

" Pinch Valve Female Coupler EndEPDM Rubber Bladder Seal

" Pinch Valve Female Coupler EndFKM (viton type) Rubber Bladder Seal

31

Polypropylene Check ValveVALVES

FEATURES One piece construction. 150 P.S.I. maximum. 1-2 P.S.I. spring. Glass reinforced polypropylene. 316 stainless steel springs. EPDM gasket.

MINI CHECK VALVEPART NO CV100MT DESCRIPTION 1" Male x Female NPT MAX PIPE QTY PSI SIZE 150 1" 1 PRICE $20.15

NEW!PART NO CV300

CHECK VALVEDESCRIPTION 3" Full Port Check Valve MAX PIPE QTY PSI SIZE 150 3" 1 PRICE $41.10

See flange clamps and gaskets on page 75. See page 72 for our manifold version.

316 Stainless Steel Two Piece Ball ValvesFEATURES 316 stainless steel. Blow out proof stem. All valves 100% tested by air, underwater at 100 P . S.I. in open and closed positions. Latch locking handle performs in both open and closed positions. Mounting pad. PTFE seals and seats. All full port design. Valves rated at 1,000 P . S.I.

316 SS FULL PORT BALL VALVESHANDLE MAX PIPE OPENING QTY TYPE PSI SIZE THRU BALL VSS025 " SS Full Port Ball Valve Straight 1000 " 1 " PART NO DESCRIPTION VSS038 38" SS Full Port Ball Valve VSS050 VSS075 Straight 1000 Straight 10003 " 8 3 " 8

PRICE $85.24 $85.24 $101.07 $120.12 $145.55 $209.81 $265.62 $349.23

1 1 1 1 1 1 1

" SS Full Port Ball Valve Straight 1000 " SS Full Port Ball Valve

" "

" "1" 1" 1" 2" 3"

VSS100 1" SS Full Port Ball Valve

Straight 1000 1"

VSS125 1" SS Full Port Ball Valve Straight 1000 1" VSS150 1" SS Full Port Ball Valve Straight 1000 1" VSS200 2" SS Full Port Ball Valve VSS300 3" SS Full Port Ball Valve Straight 1000 2" Straight 1000 3"

1 $1,205.43

REPLACEMENT PARTS HANDLESPART NO VSS05153 VSS07153 VSS10153 VSS15153 VSS20153 VSS35153 DESCRIPTION Handle for VSS025, VSS038 & VSS050 Handle for VSS075 Handle for VSS100 & VSS125 Handle for VSS150 Handle for VSS200 Handle for VSS300 QTY 1 1 1 1 1 1 PRICE $14.31 $14.31 $19.71 $22.89 $22.89 $49.30 PART NO VSS02500 VSS05200 VSS07200 VSS10200 VSS12500 VSS15200 VSS25200 VSS35200

REPLACEMENT PARTSDESCRIPTION QTY 1 1 1 1 1 1 1 1 PRICE $13.97 $18.61 $18.91 $20.92 $36.11 $36.89 $57.72 $138.73

" & 38" Repair Kit (Includes all PTFE seals & seats) " Repair Kit (Includes all PTFE seals & seats) " Repair Kit (Includes all PTFE seals & seats)1" Repair Kit (Includes all PTFE seals & seats) 1" Repair Kit (Includes all PTFE seals & seats) 1" Repair Kit (Includes all PTFE seals & seats) 2" Repair Kit (Includes all PTFE seals & seats) 3" Repair Kit (Includes all PTFE seals & seats)

32

www.banjocorp.com

ELECTRIC VALVESStainless Steel and EPDM Indicator Shaft Seal

[email protected]

s nlesall i a t S el B Ste Stem &Heavy Duty Motor

Open/Closed Indicator Corrosion Resistant Polypropylene Construction

EPDM Cable Seal

EL ECTR I C VAL VES

Motor Housing Double Sealed with EPDM

All Metal Gears

Stainless Steel Loaded Stem PTFE Flange Clamp for Easy Motor/Valve Separation EPDM PTFE

FEATURES 316 stainless steel ball & stem. Fiberglass reinforced polypropylene. Glass reinforced PTFE seats. All FKM (viton type) Body O-rings. 12-volt DC, (24-volt available). 150 P.S.I. maximum pressure @ 70F. Internally fused/automatic reset. Weep hole between valve and actuator.

Stainless Steel Ball

Stainless Steel Bolts

FKM (viton type) Body O-Rings

Glass Reinforced PTFE Ball Seats

33

Electric Valves ," 1," 1" ThreadedFEATURES 316 stainless steel ball & stem. Stainless steel hardware. Fiberglass reinforced polypropylene. Glass reinforced PTFE seats. FKM (viton type) or EPDM O-rings. 12-volt DC operated. 24-volt available in most models. 150 P.S.I. maximum pressure @ 70F. Easily repairable. Open/closed indicator.ELECTRIC VALVES

Second Response TimePART NO EV075 EV100FP EV125 DESCRIPTION MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 " 1" 1 $464.27 150 1" 1" 1" 1 1 $464.27 $464.27 150 1"OPE OPE NCLOS ED

CLOS

ED

" Electric Valve1" Full Port Electric Valve 1" Electric Valve

BA

O NJ

On/Off Wiring Diagram

4 Second Response Time "-1" REGULATING ELECTRIC VALVESPART NO EVR075 EVR125 DESCRIPTION MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 " 1" 1 $642.76 150 1" 1" 1" 1 1 $642.76 $642.76 150 1"

" Electric Valve1" Electric Valve

EVR100FP 1" Full Port Electric Valve

Regulating Wiring Diagram

Note: 2 wire regulating and other response times available. Contact our Sales Team for part number and availability of valves.

34

N

"-1" ON/OFF ELECTRIC VALVES

www.banjocorp.com14 14 20 23 14 21 15 18

ELECTRIC VALVES

[email protected]/16

315/16

BANJO

73/8

.

16 22 19 17 24Fast repair replacement options. Assembly Specs: Body bolt tightening torque: 75 in-lb Max stem turning torque: 75 in-lb421/32.

125/32

.

EL ECTR I C VAL VES

9 13Body style may vary

Endplate pictured is Manifold Style

8

6

4 3 2 1

13

5 10

7 12 11 12 10 5

8

6

EV075-EVR075-EV100FP-EVR100FP-EV125-EVR125ITEM 1 1 1 2 3 4 4 4 5 5 5 6 7 8 9 10 11 PART NO EV075XR1 EV100XR1 EV125XR1 MVE004 FC100 EV3100 EVR3100 EVR3102 VE07357 VE10257A VE10256A V10119 V10118 DESCRIPTION QTY 1 1 1 1 1 1 1 1 2 2 2 4 1 4 1 2 1 PRICE $136.75 $136.75 $136.75 $0.40 $9.90 $305.18 $305.18 $305.18 $21.60 $14.47 $14.47 $0.56 $27.11 $0.42 $61.27 $9.93 $14.33 ITEM 12 13 14 15 16 16 16 17 18 19 20 21 22 23 24 25

REPLACEMENT PARTS

EV075-EVR075-EV100FP-EVR100FP-EV125-EVR125PART NO VE10264 V10117 VE15220 MEV10102A VE4984 VE4983 VE4985 MVE105 MVE002 MVE104 VE109E MVE007 MVE106 VE107A MEV10101 EV10210 DESCRIPTION 1" FKM (viton type) Body O-Ring 516" x 3" SS Body Bolt Housing Screw Housing Top for Small Motor QTY 2 4 6 1 1 1 1 1 1 1 1 1 1 1 1 1 PRICE $6.05 $1.38 $0.28 $40.31 $323.91 $395.88 $323.91 $0.40 $0.82 $3.02 $4.58 $1.03 $2.67 $7.20 $55.42 $76.94

REPLACEMENT PARTS

" Electric Valve Sub Assembly1" Electric Valve Sub Assembly 1" Electric Valve Sub Assembly Electric Valve Flange Gasket 1" Flange Clamp

Second 3 Wire On/Off Motor4 Second 4 Wire HT On/Off Motor 8 Second 2 Wire HT Regulating Motor Motor Shaft Gasket Heyco " Threaded Bushing Outer Housing Gasket Indicator Seal 3mm x 5mm FKM (viton type) O-Ring Inner Housing Gasket Flow Indicator Housing Bottom for Small Motor Repair Kit (Includes items 2, 9, 10, 12)

Second 3 Wire Motor AssemblyRegulating 4 Wire, 4 Second Regulating 2 Wire, 8 Second

" Threaded End Plate1" Threaded End Plate 1" Threaded End Plate 516" SS Body Nut

VE10155SSH 1" 316 SS Hollow Ball 516" SS Lock Washer MEV10151 1" SS Stem w/Seals 1" Electric Ball Seat 1" Body

VE10258A MEV10254A

35

Electric Valves 1," 2" ThreadedFEATURES 316 stainless steel ball & stem. Stainless steel hardware. Fiberglass reinforced polypropylene. Glass reinforced PTFE seats. FKM (viton type) or EPDM O-rings. 12-volt DC operated. 24-volt available in most models. 150 P.S.I. maximum pressure @ 70F. Easily repairable. Open/closed indicator.ELECTRIC VALVES

ON/OFF Electric Valves - 1 Second Response Time 1"-2" ON/OFF ELECTRIC VALVESPART NO EV150 EV200 DESCRIPTION 1" Electric Valve 2" Electric Valve MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 1" 1 $680.57 1 " 1 $680.57 150 2" 1"

CLOS

ED

BA

O NJ


REGULATING Electric Valves - 4 Second Response Time 1"-2" REGULATING ELECTRIC VALVESPART NO EVR150 EVR200 DESCRIPTION 1" Electric Valve 2" Electric Valve MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 1" 1 $809.11 1 " 1 $809.11 150 2" 1"

OPE

N

CLOS

ED

Note: 2 wire regulating and other response times available. Contact our Sales Team for part number and availability of valves.


36

OPE

N

www.banjocorp.com

ELECTRIC VALVES

[email protected]

14

14

20

23 14 21 18

65/16

315/16

15BANJO

73/8

.


125/32

.

EL ECTR I C VAL VES



8

6

4 3 2 1

13

5 10

7 12 11 12 10 5

8

6

REPLACEMENT PARTS EV150-EV200-EVR150-EVR200ITEM 1 1 2 3 4 4 4 5 5 6 7 8 9 10 11 12 PART NO EV150XR1 EV200XR1 MVE004 FC100 EV4100 EVR4100 EVR4102 VE20257 VE20256A V20019 DESCRIPTION 1" Full Port Electric Valve Sub Assembly 2" Electric Valve Sub Assembly Electric Valve Flange Gasket 1" Flange Clamp 1 Second 3 Wire Motor Assembly Regulating 4 Wire, 4 Second Regulating 2 Wire, 6 Second 1" Threaded End Plate 2" Threaded End Plate3 8"

REPLACEMENT PARTS EV150-EV200-EVR150-EVR200ITEM 13 14 15 16 16 16 17 18 19 20 21 22 23 24 25 PART NO V20017 VE15220 MVE25102 VE4987 VE4988 VE49892 MVE107 MVE002 MVE104 VE109E MVE007 MVE106 VE107A MEV25101 EV20210 DESCRIPTION 3 8" x 4" SS Body Bolt Housing Screw Housing Top for Large Motor 1 Second Hi Torque On/Off Motor 4 Second 12 Volt Wire High Torque Motor 6 Second 12 Volt Wire High Torque Motor Motor Shaft Gasket Heyco " Threaded Bushing Outer Housing Gasket Indicator Seal 3mm x 5mm FKM (viton type) O-Ring Inner Housing Gasket Flow Indicator Housing Bottom for Large Motor Repair Kit (Includes items 2, 9, 10, 12) QTY 4 6 1 1 1 1 1 1 1 1 1 1 1 1 1 PRICE $1.72 $0.28 $40.31 $395.88 $384.33 $384.33 $0.40 $0.82 $3.02 $4.58 $1.03 $2.67 $7.20 $55.42 $86.40

QTY 1 1 1 1 1 1 1 2 2 4 1 4 1 2 1 2

PRICE $251.92 $251.92 $0.40 $9.90 $417.90 $313.43 $313.43 $13.03 $13.03 $1.03 $52.54 $0.42 $61.27 $10.43 $17.22 $6.03

16 SS Hex Nut

VE20255SSH 2" 316 SS Hollow Ball 3 8" SS Lock Washer V20018 MEV10151 VE20258 MEV20254A VE20264 1" SS Stem w/Seals 1" & 2" Electric Ball Seat 1" & 2" Body 2" FKM (viton type) Body O-Ring

37

Electric Valves 2" Full Port ThreadedFEATURES 316 stainless steel ball & stem. Stainless steel hardware. Fiberglass reinforced polypropylene. Glass reinforced PTFE seats. FKM (viton type) or EPDM O-rings. 12-volt DC operated. 24-volt available in most models. 150 P.S.I. maximum pressure @ 70F. Easily repairable. Open/closed indicator.ELECTRIC VALVES

ON/OFF Electric Valves - 1 Second Response TimeCLOS ED

2" FULL PORT ON/OFF ELECTRIC VALVESPART NO EV204FP DESCRIPTION 2" Full Port Electric Valve MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 2" 2" 1 $718.37

BA

O NJ


REGULATING Electric Valves - 4 Second Response Time 2" FULL PORT REGULATING ELECTRIC VALVESPART NO DESCRIPTION EVR204FP 2" Full Port Electric Valve MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 2" 2" 1 $854.47OPE N

CLOS

ED

Regulating Wiring DiagramNote: 2 wire regulating and other response times available. Contact our Sales Team for part number and availability of valves.

38

OPE

N

www.banjocorp.com

ELECTRIC VALVES

[email protected]

14

14

20

23 14 21 18

65/16

315/16

15BANJO

73/8

.


125/32

EL ECTR I C VAL VES

.



8

6

4 3 2 1

13

5 10

7 12 11 12 10 5

8

6

REPLACEMENT PARTS EV204FP-EVR204FPITEM 1 2 3 4 4 4 5 6 7 8 9 10 11 12 PART NO EV204XR1 MVE004 FC100 EV4100 EVR4100 EVR4102 VE25356A V20019 V20018 DESCRIPTION 2" Full Port Electric Valve Sub Assembly Electric Valve Flange Gasket 1" Flange Clamp 1 Second 3 Wire Motor Assembly Regulating 4 Wire, 4 Second Regulating 2 Wire, 6 Second 2" Full Port Threaded End Plate3 8"

REPLACEMENT PARTS EV204FP-EVR204FPPRICE $307.32 $0.40 $9.90 $417.90 $313.43 $313.43 $19.15 $1.03 $53.12 $0.42 $68.19 $10.43 $20.24 $9.81 ITEM 13 14 15 16 16 17 18 19 20 21 22 23 24 25 PART NO V25017 VE15220 MVE25102 VE4987 VE4988 MVE107 MVE002 MVE104 VE109E MVE007 MVE106 VE107A MEV25101 EV25210 DESCRIPTION 3 8" x 4" SS Body Bolt Housing Screw Housing Top for Large Motor 1 Second Hi Torque On/Off Motor 4 Second 12 Volt Wire High Torque Motor Motor Shaft Gasket Heyco " Threaded Bushing Outer Housing Gasket Indicator Seal 3mm x 5mm FKM(viton type) O-Ring Inner Housing Gasket Flow Indicator Housing Bottom for Large Motor Repair Kit (Includes items 2, 9, 10, 12) QTY 4 6 1 1 1 1 1 1 1 1 1 1 1 1 PRICE $2.36 $0.28 $40.31 $395.88 $384.33 $0.40 $0.82 $3.02 $4.58 $1.03 $2.67 $7.20 $55.42 $98.56

QTY 1 1 1 1 1 1 2 4 1 4 1 2 1 2

16 SS Hex Nut

VE25255SSH 2" 316 SS Hollow Ball 3 8" SS Lock Washer 1" SS Stem w/Seals 1" & 2" Electric BallSeat 1" & 2" Body 2" FKM(viton type) Body O-Ring

MEV25151 VE25258A MEV25254A V25264

39

Electric Valves 3" Full Port ThreadedFEATURESELECTRIC VALVES

Stainless steel hardware. Fiberglass reinforced polypropylene. Glass reinforced PTFE seats. FKM (viton type) or EPDM O-rings. 12-volt DC operated. 100 P.S.I. maximum pressure @ 70F.

NEW!

ON/OFFElectric Valves - 3 Second Response Time 3 Wire 3" FULL PORT ON/OFF ELECTRIC VALVESPART NO EV300FP DESCRIPTION 3" Full Port Electric Valve MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 100 3" 3" 1 $1,958.86

CLOS

ED

BA

O NJ

Note:4 wire regulating & 11 0 Volt AC, 9 Seconds response times available. Contact our sales team for part number and availability of valves.


40

OPE

N

www.banjocorp.com

ELECTRIC VALVES

[email protected]

EL ECTR I C VAL VES

REPLACEMENT PARTS EV00FPITEM 1 2 3 4 5 6 7 8 9 10 11 PART NO V35254 V25060 V25160 V35264 V20018 V20019 V35017 V25163 V35265 V35255A VE30151SS 3" Body Stem Shim Upper Stem Bushing 3" Threaded End Plate 3 8" SS Lock Washer3 8"

REPLACEMENT PARTS EV300FPQTY 1 1 1 2 6 6 4 1 2 1 1 PRICE $33.67 $2.11 $4.16 $47.93 $0.42 $1.03 $4.87 $3.61 $13.76 $36.81 $58.77 ITEM 12 13 14 15 16 17 18 19 20 21 22 PART NO VE35188 VE35189 V10119 V10118 17019 VE35258A VE30022 VE30121 VE5630 VE30021 V35018 DESCRIPTION Actuator Bracket-Large Actuator Bracket-Small 5 16" Hex Nut5 16" Lock Washer

DESCRIPTION

QTY 1 1 2 6 6 2 1 1 1 2 2

PRICE $104.66 $90.67 $0.56 $0.42 $1.17 $20.50 $7.56 $6.99 $805.93 $0.56 $10.00

Hex Bolt Ball Seat 1" Snap Ring Stem Washer 3 Sec, 12VDC Motor Washer 3 8" SS Bolt

16 SS Hex Nut

3 8" SS Bolt

Stem O-Ring 3" FKM(viton type) Body O-Ring 3" Electric Ball SS Stem w/Out Seals

41

3-Way Electric Valves ," 1," 1" Threaded w/Flanged InletFEATURES 316 stainless steel ball &stem. Stainless steel hardware. Fiberglass reinforced polypropylene. Glass reinforced PTFE seats. FKM (viton type) or EPDM O-rings. 24-volt available in most models. 12-volt DC operated. 150 P.S.I. maximum pressure @ 70F. Easily repairable. Open/closed indicator. Dont forget the manifold connections for inlets on pages 72-75.Attention: 3-Way regulating valves are not shown, but are available. Standard 3-Way valves use the On/Off wiring diagram. ELECTRIC VALVES

BOTTOM LOAD

Second Response Time"-1" BOTTOM LOAD ON/OFF ELECTRIC VALVESPART NO EV075BL EV100BL EV125BL DESCRIPTION MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 " 1" 1 $521.75 150 1" 1" 1" 1 1 $521.75 $521.75 150 1"

" Electric Valve1" Electric Valve 1" Electric Valve

BOTTOMLOAD: Directional flow right or left. Valve flow cannot be turned off.

Second Response Time"-1" SIDE LOAD REGULATING ELECTRIC VALVESPART NO EV075SL EV100SL EV125SL DESCRIPTION MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 " 1" 1 $521.75 150 1" 1" 1" 1 1 $521.75 $521.75 150 1"

" Electric Valve1" Electric Valve 1" Electric Valve

SIDELOAD: Directional flow right or left. Valve flow cannot be turned off.OPE N

SIDE LOAD

OPE

N

CLOS

ED

CLOS

ED

BA

O NJ



42


ELECTRIC VALVES

[email protected]/16

315/16

BANJO

73/8

.


125/32

.

EL ECTR I C VAL VES



8

6

4 3 2 1

13

5 10

7 12 11 12 10 5

8

6

EV075SL-EV075BL-EV100SL-EV100BL-EV125SL-EV125BLITEM 1 1 1 1 1 1 2 3 4 4 5 5 5 6 7 8 9 10 PART NO EV075SLXR1 EV100SLXR1 EV125SLXR1 EV075BLXR1 EV100BLXR1 EV125BLXR1 MVE004 FC100 EV3100 EVR3100 VE07357 VE10257A VE10256A V10119 VE10355 V10118 MEV10151 VE10258A DESCRIPTION QTY 1 1 1 1 1 1 1 1 1 1 2 2 2 4 1 4 1 2 PRICE $194.33 $194.33 $194.33 $194.33 $194.33 $194.33 $0.40 $9.90 $305.18 $305.18 $21.60 $14.47 $14.47 $0.56 $87.82 $0.42 $61.27 $9.93 ITEM 11 11 12 13 14 15 16 16 17 18 19 20 21 22 23 24 25

REPLACEMENT PARTS

EV075-EVR075-EV100FP-EVR100FP-EV125-EVR125PART NO MEV10354AB MEV10354AS VE10264 V10117 VE15220 MEV10102A VE4984 VE4983 MVE105 MVE002 MVE104 VE109E MVE007 MVE106 VE107A MEV10101 EV10210 DESCRIPTION QTY 1 1 2 4 6 1 1 1 1 1 1 1 1 1 1 1 1 PRICE $19.45 $19.45 $6.05 $1.38 $0.28 $40.31 $323.91 $395.88 $0.40 $0.82 $3.02 $4.58 $1.03 $2.67 $7.20 $55.42 $76.94

REPLACEMENT PARTS

" Electric Valve Sub Assembly1" Electric Valve Sub Assembly 1" Electric Valve Sub Assembly

"-1" Bottom Load Body "-1" Side Load BodyFKM (viton type) Body O-Ring 516" x 3" SS Body Bolt Housing Screw Housing Top for Small Motor

" Electric Valve Sub Assembly1" Electric Valve Sub Assembly 1" Electric Valve Sub Assembly Electric Valve Flange Gasket 1" Flange Clamp

Second 3 Wire On/Off Motor4 Second 4 Wire HTOn/Off Motor Motor Shaft Gasket Heyco " Threaded Bushing Outer Housing Gasket Indicator Seal 3mm x 5mm FKM(viton type) O-Ring Inner Housing Gasket Flow Indicator Housing Bottom for Small Motor Repair Kit (Includes items 2, 9, 10, 12)

Second 3 Wire Motor AssemblyRegulating 4 Wire, 4 Second

" Threaded End Plate1" Threaded End Plate 1" Threaded End Plate 516" SS Body Nut 1" 316 SS Hollow Ball 516" SS Lock Washer 1" SS Stem w/Seals 1" Electric BallSeat

43

3-Way Electric Valves 1", 2" Threaded w/Flanged InletFEATURES 316 stainless steel ball &stem. Stainless steel hardware. Fiberglass reinforced polypropylene. Glass reinforced PTFE seats. FKM (viton type) or EPDM O-rings. 12-volt DC operated. 24-volt available in most models. 150 P.S.I. maximum pressure @ 70F. Easily repairable. Open/closed indicator. Dont forget the manifold connections for inlets on pages 72-75.Attention: 3-Way regulating valves are not shown, but are available. Standard 3-Way valves use the On/Off wiring diagram. ELECTRIC VALVES

BOTTOM LOAD1 SECOND RESPONSE TIME

1"-2" BOTTOM LOAD ON/OFF ELECTRIC VALVESPART NO EV150BL EV200BL DESCRIPTION 1" Electric Valve 2" Electric Valve MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 1" 1 $753.16 1 " 1 $753.16 150 2" 1"

BOTTOMLOAD: Directional flow right or left. Valve flow cannot be turned off. 1 SECOND RESPONSE TIME

1"-2" SIDE LOAD REGULATING ELECTRIC VALVESPART NO EV150SL EV200SL DESCRIPTION 1" Electric Valve 2" Electric Valve MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 1" 1 $753.16 1 " 1 $753.16 150 2" 1"

SIDELOAD: Directional flow right or left. Valve flow cannot be turned off.

SIDE LOAD

OPE OPECLOS

N

CLOS

ED

BA

O NJ


N

ED


44

www.banjocorp.com

ELECTRIC VALVES

[email protected]

14

14

20

23 14 21 18

65/16

315/16

15BANJO

73/8

.


125/32

.

EL ECTR I C VAL VES



8

6

4 3 2 1

13

5 10

7 12 11 12 10 5

8

6

EV150SL-EVR150BL-EV200SL-EVR200BLITEM 1 1 1 1 2 3 4 4 5 5 6 7 8 9 10 11 11 PART NO EV150SLXR1 EV200SLXR1 EV150BLXR1 EV200BLXR1 MVE004 FC100 EV4100 EVR4100 VE20257 VE20256A V20019 VE20355 V20018 MEV10151 VE20258A DESCRIPTION 1" Electric Valve Sub Assembly 2" Electric Valve Sub Assembly 1" Electric Valve Sub Assembly 2" Electric Valve Sub Assembly Electric Valve Flange Gasket 1" Flange Clamp 1 Second 3 Wire Motor Assembly Regulating 4 Wire, 4 Second 1" Threaded End Plate 2" Threaded End Plate3 8"

REPLACEMENT PARTS

EV150SL-EVR150BL-EV200SL-EVR200BLQTY 1 1 1 1 1 1 1 1 2 2 4 1 4 1 2 1 1 PRICE $323.13 $323.13 $323.13 $323.13 $0.40 $9.90 $417.90 $313.43 $13.03 $13.03 $1.03 $105.09 $0.42 $61.27 $10.43 $20.07 $20.07 ITEM 12 13 14 15 16 16 17 18 19 20 21 22 23 24 25 PART NO VE20264 V20017 VE15220 MVE25102 VE4987 VE4988 MVE107 MVE002 MVE104 VE109E MVE007 MVE106 VE107A MEV25101 EV202103 8"

REPLACEMENT PARTSDESCRIPTION

QTY 2 4 6 1 1 1 1 1 1 1 1 1 1 1 1

PRICE $6.03 $1.72 $0.28 $40.31 $395.88 $384.33 $0.40 $0.82 $3.02 $4.58 $1.03 $2.67 $7.20 $55.42 $86.40

2" FKM (viton type) Body O-Ringx 4" SS Body Bolt

Housing Screw Housing Top for Large Motor 1" High Torque On/Off Motor 4 Second 12 Volt High Torque Motor Motor Shaft Gasket Heyco " Threaded Bushing Outer Housing Gasket Indicator Seal 3mm x 5mm FKM(viton type) O-Ring Inner Housing Gasket Flow Indicator Housing Bottom for Large Motor Repair Kit (Includes items 2, 9, 10, 12)

16 SS Hex NutSS Lock Washer

2" 316 SS Hollow Ball3 8"

1" SS Stem w/Seals 1" & 2" Electric BallSeat

MEV20354AB 1" & 2" Bottom Load Body MEV20354AS 1" & 2" Side Load Body

45

3-Way Electric Valves 2" Full Port Threaded w/Flanged InletFEATURES 316 stainless steel ball &stem. Stainless steel hardware. Fiberglass reinforced polypropylene. Glass reinforced PTFE seats. FKM (viton type) or EPDM O-rings. 12-volt DC operated. 24-volt available in most models. 150 P.S.I. maximum pressure @ 70F. Easily repairable. Open/closed indicator. Dont forget the manifold connections for inlets on pages 72-75.Attention: 3-Way regulating valves are not shown, but are available. Standard 3-Way valves use the On/Off wiring diagram. ELECTRIC VALVES

BOTTOM LOAD

1 SECOND RESPONSE TIME

2" FULL PORT BOTTOM LOAD ON/OFF ELECTRIC VALVESPART NO DESCRIPTION EV204BLFP 2" Full Port Electric Valve MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 2" 2" 1 $809.11

BOTTOMLOAD: Directional flow right or left. Valve flow cannot be turned off. 1 SECOND RESPONSE TIME

2" FULL PORT SIDE LOAD REGULATING ELECTRIC VALVESPART NO DESCRIPTION EV204SLFP 2" Full Port Electric Valve MAX PIPE OPENING QTY PRICE PSI SIZE THRU BALL 150 2" 2" 1 $809.11

SIDELOAD: Directional flow right or left. Valve flow cannot be turned off.

SIDE LOAD

OPE OPECLOS

N

CLOS

ED

BA

O NJ


N

ED


46


ELECTRIC VALVES

[email protected]

65/16

315/16

BANJO

73/8

.


125/32

.

EL ECTR I C VAL VES



8

6

4 3 2 1

13

5 10

7 12 11 12 10 5

8

6

EV204SLFP-EVR204BLFPITEM 1 1 2 3 4 4 5 6 7 8 9 10 11 11 12 PART NO EV204SLXR1 EV204BLXR1 MVE004 FC100 EV4100 EVR4100 VE25356A V20019 VE25355 V20018 MEV25151 VE25258A DESCRIPTION 2" Full Port Electric Valve Sub Assembly 2" Full Port Electric Valve Sub Assembly Electric Valve Flange Gasket 1" Flange Clamp 1 Second 3 Wire Motor Assembly Regulating 4 Wire, 4 Second 2" Full Port Threaded End Plate3 8"

REPLACEMENT PARTS

EV204SLFP-EVR204BLFPQTY 1 1 1 1 1 1 2 4 1 4 1 2 1 1 2 PRICE $387.64 $387.64 $0.40 $9.90 $417.90 $313.43 $19.15 $1.03 $139.65 $0.42 $68.19 $10.43 $21.32 $21.32 $9.81 ITEM 13 14 15 16 16 17 18 19 20 21 22 23 24 25 PART NO V25017 VE15220 MVE25102 VE4987 VE4988 MVE107 MVE002 MVE104 VE109E MVE007 MVE106 VE107A MEV25101 EV252103 8"

REPLACEMENT PARTSDESCRIPTIONx 4" SS Body Bolt

QTY 4 6 1 1 1 1 1 1 1 1 1 1 1 1

PRICE $2.36 $0.28 $40.31 $395.88 $384.33 $0.40 $0.82 $3.02 $4.58 $1.03 $2.67 $7.20 $55.42 $98.56

Housing Screw Housing Top for Large Motor 1" High Torque On/Off Motor 4 Second 12 Volt High Torque Motor Motor Shaft Gasket Heyco " Threaded Bushing Outer Housing Gasket Indicator Seal 3mm x 5mm FKM(viton type) O-Ring Inner Housing Gasket Flow Indicator Housing Bottom for Large Motor Repair Kit (Includes items 2, 9, 10, 12)

16 SS Hex NutSS Lock Washer

2" 316 SS Hollow Ball3 8"

1" SS Stem w/Seals 1" & 2" Electric BallSeat

MEV25354AB 1" & 2" Bottom Load Body MEV25354AS 1" & 2" Side Load Body V25264 2" FKM (viton type) Body O-Ring

47

k Quicasy & Embly Asse

Manifold Systems

No Thr No ea eads lant No PiS pe Tap e

MANIFOLD SYSTEMS

Make the Right Connection!

FEATURESQuick &Easy Assembly Positive Seals 360 Orientation Easy On/Off Hose Connections No Threads, No Sealant &No Pipe Tape Heavy Duty Glass Filled Polypropylene

APPLICATIONSAgricultural Sprayers Plant Fertilizers Industrial Plumbing Chemical Processing

SIZESM100 Series - 1" Full Port Flow M200 Series - 2"Standard Port M220 Series - 2" Full Port Flow M300 Series - 3" Full Port Flow

For use with non-positive DisplacementPump (centrifugal pump)Agitation Tube (back to tank)

To Regulating Valve (1" Minimum return back to suction side of pump)

Pressure Hose (from pump) Spike Relief Valve (return back to suction side of pump)

Boom Hose Boom Hose (Section 1) (Section 2)

Boom Hose (Section 3)

48

www.banjocorp.com

MANIFOLD SYSTEMS

[email protected]

1" Banjo Electric Manifold Valve Assemblies2 Valve Manifold 3 Valve Manifold

MANI FOL D SYSTEMS

2 VALVE MANIFOLD ASSEMBLY (M200 SERIES)PART NO MEV102CF DESCRIPTION 1" Manifold Valve Assembly 2" Inlet Flanges, 1" Outlet Flanges MAX PSI PIPE QTY SIZE 2" In 1 150 1" Out PRICE $967.90

3 VALVE MANIFOLD ASSEMBLY (M200 SERIES)PART NO MEV103CF DESCRIPTION 1" Manifold Valve Assembly 2" Inlet Flanges, 1" Outlet Flanges MAX PSI PIPE QTY PRICE SIZE 2" In 150 1" Out 1 $1,429.18

3 VALVE MANIFOLD ASSEMBLY (M200 SERIES) W/ MOUNTING BRACKETSPART NO MEV103MB DESCRIPTION 1" Manifold Valve Assembly 2" Inlet Flanges, 1" Outlet Flanges w/ Mounting Brackets MAX PSI PIPE QTY PRICE SIZE 2" In 150 " 1 $1,468.84 1 Out

FLANGED MOUNTING BRACKET TEEPART NO M200100TEEB DESCRIPTION 2" x 1" Standard Port Flanged Tee w/ Mounting Bracket MAX PIPE QTY PSI SIZE 2" In 1 150 1" Out PRICE $18.44

4 Valve Manifold

5 Valve Manifold



49

1"-3" Elec

2013 Banjo Catalog

Documents

Transcript of 2013 Banjo Catalog