2013 04-17 - prez piseo jth - eng
16
Company Profile
description
This is the presentation of a newly created French innovation platform dedicated to LED lighting. The platform is located nearby Lyon, France.
Transcript of 2013 04-17 - prez piseo jth - eng
Company Profile
National Lighting Innovation Platform
• Initiated in spring 2010 by CEA-LETI & Cluster Lumière members
• Selected as Technological Platform and granted for public funding by the French Ministry of Industry on September 23rd, 2011
• Created as a private company on November, 30th 2011, with 700 000€ capital, owned by 30 shareholders
• 3,6 millions € investment spread on 2012 – 2013 – 2014
• 1,6 million € support from French State and local authorities
Historic
Lighting : unprecedented challenges• Technological rupture (LED & OLED)
– Lots of new products, new form factors– Full avantages of electronics– Lack of performance criterias (norms, …)– Fast improvement rate (276 lm/W en labo)– New entrants (asian, electronics)
• Environmental, legal and financial pressure– Need for more efficient solutions, Energy Performance Contracting– New legal standards (RT 2012, EU 1194/2012,…)– Less public investments, Private Funded Initiatives (PFI)– Need for more attractive business places
• Social pressure– People ageing– Health and well being considerations
• Biological effect of light– Depressivness– Alertness
Context
To support actors of the value chain in the lighting revolution
Bring answers to :
• Technological rupture of LED & OLED• System reliability• Smart lighting• Norms and standards• Energy efficiency• New lighting usage• Changes in job contents
Mission
Market
Manufacturers LED Luminaires
Retrofit LED lamps
Specifiers et usersProperty developpers : buildings, streets,
shops,…Contractors : architects, lighting designers,
engineering offices,…Retailers InstallersTenants
Needs : Manufacturers
(re) Design Development Industrialization Commercialization
LED & modulescharacterisation
Norms and legalscouting
Training
BenchmarkingReverse engineering
Reverse costing
Prototype testing
Performanceverification
of prototypes
Prototype demonstrations In real situation
for pre-commercial validation
Performance verification
of pilot serie products
Performance verification of
regular production products
Demonstration of products in real
situation
Needs : Specifiers & Users
Project development Quotations Operation
Norms and legalscouting
Simulations
Engineering To Order product prototypes testing
Performance verification of chosen products
Built-in lighting solutions
prototypes testing
Performance verification
of the lighting installation
Lighting installation diagnostic
Execution
Performance verification of catalogue products
Training
Performance of LED Systems
Electrical
Reliability
Photo-metry
Luminous flux
Colour point
Colour temperature
Colour rendering
Light distribution
Flux maintenance
Consummed power
Voltage
Current
Efficacité lumineuse
Power factor
Colour shift
Early failures
Harmonics distorsion
PISEO Offer 2013
Photometry• Luminous flux • Spectral and colour analysis (Colour point, CCT, CRI)• Light distribution• 2D luminance distribution
Electrical parameters• Consummed power• Luminous efficacy• Cos ϕ, Power factor• Harmonic distortion• Flicker
Thermal characeristics• Thermal imaging with IR camera• LED junction temperature in running mode
Half and full day lab sessions
PISEO Offer 2013
Reliability testing• Design and manufacturing process evaluation :
• Critical visual inspection of electronics (vs state of the art)
• Potential failure detection by thermal cyscling• On / Off cycles• Photometry after testing (flux, CCT, colour point,
CRI)
• LED integration vs manufacturer recommendations
• Flux maintenance, CCT and colour shift after 25% specified life time with 6000h max
PISEO Offer 2013
Verification of legal and norms requirements• Evaluation of photobiological risk according to EN 62471
(Application of European directive 2006/25/EC)• Evaluation of compliancy with Europan Regulation
1194/2012 (Eco-design and performance of LED lamps, modules and luminaires)
• Evaluation of compliancy with IEC 62612 (Perfomance of LED lamps >50V)
• Evaluation of compliancy with IEC 62717 (performance LED modules)
• Evaluation of compliancy with IEC 62722-2-1 (performance LED luminaires)
• CE marking• Legal and norms scouting
PISEO Offer 2013
Safety and environmental tests (partenship)• Electrical safety • IP & IK tests• EMC tests• Endurance tests
Training, symposiums• Legal and norms• Electronic systems reliability• FMEA• Organisation of symposiums
Unique concentration of photometrical, electrical & thermal imaging equipment
Equipement
Photo-Goniometere LMT GO DS 2000 type C
Gonio-photomter MAJANTYS for retrofit lamps
2 m Integrating sphere INSTRUMENT SYSTEMS equipped with CAS 120spectrometer
Thermal camera INFRATEC 50 cm integrating sphere MAJANTYS (or 5cm for LED sources) equipped B&WTEK spectrometer
Photobilogical test bench OST-300 EVERFINE(200nm-3000nm)
Video-luminancemeter LUMETRIX
Non exhaustive pictures
Quality as our foundation
• Quality approach according to ISO 17025• High precision equipments verified by accredited laboratories
(METAS, LNE)• Test performed according to international standards (NF EN
13032-1 et NF PREN 13032-4)• Participation to the IEA international inter-laboratory
comparaison program of SSL products
Quality
Team
Competences
Technical Partners
Cédric DOGERManaging Director
Lydie BLANCBusiness
Development
Stéphane ROBERTTechnical Manager
Dan BRETONLighting & Optical
Engineer
Joël THOMESenior Consultant
Senior consultant Responsable TechniqueJoël Thomé Stéphane ROBERTPort. 06 69 42 55 41 Tel. 04 26 83 02 [email protected] Port. 06 69 42 55 30
www.piseo.fr
Contactez nous
