2011 Catalog Rescue Equipment

Rescue Equipment

Contents

2

About Holmatro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Holmatros Testing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Innovations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

CORE Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4000 Series Rescue Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

New Car Technology Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Mini Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Combi Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Spreaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Telescopic Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Extendo Ram XR 4360 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Hand Operated Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Hand Operated Power Wedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Compact Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Multi Tool Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Mini Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Specialty Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Hoses & Hose Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

CORE Technology Bulkhead Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Self Contained Rescue Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Rescue Assist Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

High Pressure Lifting Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Low Pressure Lifting Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Lifting Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

PowerShore Stabilization Systems . . . . . . . . . . . . . . . . . . . . . . . . . . 34

PowerShore Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Training Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

About Holmatro

3

Holmatro has been in the high pressure hydraulic business for more than 40 years . Founded in The Netherlands in 1967 as Holland

Machine Trading Organization, our primary focus has always been on high pressure hydraulic equipment . Initially our product

offering catered to the industrial ship building market in Holland, but over the years, it has expanded to include hydraulic systems for

emergency services and performance sailing applications . Today, the Holmatro Group operates three product divisions:

Rescue equipment Industrial equipment Marine equipment

Holmatro remains a privately held company, driven to serve our customers through innovation . By continuously investing profit back

into research and development, Holmatro has established a world renowned reputation for being one of the most innovative producers

of high pressure hydraulic equipment and the quality of our products is considered among the best available .

With the Holmatro Group headquarters in the Netherlands, Holmatro has manufacturing plants in the Netherlands, and United

States and sales offices in the United Kingdom, Poland, and the Peoples Republic of China . Our worldwide dealer network provides

after sales service on every continent .

Holmatro Group and Worldwide Dealer Network Locations

Holmatro USAHolmatro China

Holmatro PolandHolmatro UK Holmatro Netherlands

Holmatros Testing Program

4

Since Holmatro is the only company in the world to offer UL Listed rescue tools, the most frequently asked question we receive is:

Whats the difference between UL Listed rescue tools and rescue tools that UL tests to the NFPA 1936 standard?

The simple answer is that our UL Listed rescue tools are subjected to all of the NFPA 1936 requirements, plus additional testing not required by NFPA 1936 .

When testing a manufacturers product to a third party stan-dard, like NFPA 1936, if the product is found to be compliant the product is not UL Listed, it is UL Classified and may be labeled with a mark similar to the one below:

UL Listed Rescue Tools (SYAA) are investigated in accor-dance with the requirements of Underwriters Laboratories Subject 1964, Outline of Investigation for Rescue Equip-ment . These tools carry a UL Listed mark similar to the one below:

It is safe to say that obtaining a UL listing for a rescue tool is more difficult than meeting the minimum standards set by NFPA 1936 . To date, Holmatro, Inc . is the only company in the world able to offer UL Listed rescue tools .

Why are Holmatros UL Listed tools not shown in the list of NFPA Compliant tools?

UL does not list a given tool twice . In the general information page for UL Listed rescue tools it clearly states that: The basic requirements used to investigate products in this category are contained in UL Subject 1964, Outline of Investigation for Rescue Equipment . UL Subject 1964 includes the requirements contained in ANSI/NFPA 1936 .

As a result, Holmatros UL Listed Rescue Tools had to be proven to be NFPA 1936 Compliant before they could become UL Listed .

The following table provides a quick comparison of some of the differences between UL Subject 1964 (required to achieve a UL Listing) and NFPA 1936 . For more examples and information, visit our website at www.holmatro-usa.com

UL and NFPA Testing

test1 UL Subject 1964 NFPA Standard 19362

sudden pressure loss and creep test(spreading & pulling)

Measure results of sudden power loss . Load equal to1 .1 x HSF* (HPF*) or rated load .Max . creep 0 .1875 in . (4 .76 mm) after 10 min .

Measure results of sudden power loss . Load equal to1 .1 x HSF* (HPF*) or rated load Max . creep 0 .197 in . (5 mm) after 9 min .

endurance test1000 cycles at 100% rated pressure . Apply 1 .1 x max . force or rated load at max . load tip opening and measure creep (pull & spread mode) .

1000 cycles at 80% rated pressure . Apply 1 .1 x max . force or rated load at max . load tip opening and measure creep (pull & spread mode) .

hydrostatic strength testSubject pressurized parts to 2 x rated pressure for 1 min . without failing .

Not required .

deadman endurance test 6000 cycles at no load (open/close) without failure .5000 cycles at no load (open/close), check that control returns to neutral, then perform sudden pressure loss test .

relief device endurance test 100 cycles at required relief pressure without failure . Not required .

* Highest spreading force; Highest pulling force1 Not all NFPA 1936 or Underwriters Laboratories tests are included .2 Contact NFPA to receive the full text of the 1936 standard .

Innovations

5

Holmatros Past Innovations

1975 High pressure rescue tools

1985 Combi tool

1993 First UL Listed Rescue Tools

1994 First Personal Power Unit

1996 Mini Telescopic Ram

1997 3000 Series Tools

1999 First NFPA 1936 Compliant Rescue Tools

ISO9002 Certified in US

2000 Personal Power PPU15

2002 New Car Technology blade design

Self Contained Rescue Tools

2003 DPU30 Lightest Duo Pump

2005 3050 NCT Cutter

4000 Series Tools

CORE Technology

DPU31 Compact Duo Pump

2006 CORE Technology Bulkhead Fittings

2009 SMC 4006

BCT 4120

4055 NCT Cutter

2010 CU 4007 mini-cutter

HPW 4624 Hand Operated Power Wedge

SP 10

SPU 16 PC

XR 4360 Extendo Ram

Holmatro strongly believes in the power of innovation . Throughout the years we have been at the forefront of technological devel-opments in the field of hydraulic rescue equipment . Continuous market research and in-house research & development have led to many revolutionary innovations . These new Holmatro products and technologies have helped rescuers all over the world do their demanding jobs in a quicker, safer and easier way .

Some of Holmatros past innovations:

6For the past 30 years, Holmatro Rescue Equipment has been at the forefront of many product technology improvements . After decades of innovative firsts, Holmatro now introduces a revolutionary new technology that is sure to be one of the most important innovations in the field of extrication, ever:

What is CORE Technology?CORE Technology is a hydraulic system that employs COaxial Rescue Equipment hose, couplers, pumps and tools . At the core of this system is our revolutionary fluid path technology . This coaxial hose design consists of a high pressure core, surrounded and protected by the low pressure return .

What makes our coaxial hydraulic hose possible is our patented CORE Technology coupler . These couplers have a built-in, automatic return valve that eliminates the need for a dump valve on the pump, simply connect the hose and youre ready to go .

Why CORE Technology?CORE Technology is a revolutionary turning point in rescue tool technology . More than just a new tool, hose or power unit, CORE Technology is a new hydraulic system that fundamentally changes the extrication process . When lives are at stake, it's all about speed and safety .

CORE Technology is significantly faster, easier and safer, allowing rescuers to focus on the rescue operation, not the rescue equipment . Once you work with CORE Technology and discover the unprecedented benefits, you won't want to go back to a twin line system .

Hot-Swappable Change tools without returning to the power unit .

ConnectandGo There is no need to unroll a CORE Technology hose before

making your connections . No more twisted or kinked hoses .

ErrorProofConnections Male & female connectors cannot be connected incorrectly

or in the wrong order . Female couplers always connect to the tool and male couplers always connect to the power unit . CORE Technology hoses also include icons and arrows for quick and easy identification .

ContinuousSwivels 360 swivels on both ends of the hose

prevent twisting or kinking .

PackingUp Rolling up a CORE Technology hose is simple . With a

couple of overhand or underhand flicks of the wrist, the hose is coiled and ready for storage .

Reduced Weight & Space Compared to a twin line

hose of equal length, CORE Technology hose weighs approx . 40% less and the flexible design allows it to be coiled into a much tighter roll, making it easier to manage and store . Without pigtails, CORE Technology tools take up less compartment space and weigh less .

ProtectedPower With CORE Technology hoses, the high pressure line is completely protected by the low pressure return line . The maximum a rescuer could be exposed to is 363 psi (25 bar) .

Para-AramidYarnReinforced A CORE Technology hose does not use any steel wire for reinforcement, making it highly flexible and kink resistant .

Both inner and outer hoses have a 4:1 safety ratio .

FewerHosesinTheActionCircle A single smooth hose, compared to twin line hoses with Oetiker clamps, reduces trip hazards and snag points .

Hot-swappable power allows multiple tool operation from one hose, and prevents unnecessary travel to and from the power unit .

CORE Technology

10,500 psi(720 bar) max .

363 psi(25 bar) max .Faster

Safer

Easier

7The Holmatro 4000 Series holds a number of benefits that elevate Holmatro rescue tools to the next level in terms of user-friendliness, performance and working speed . Of course, CORE Technology is a standard feature on the 4000 Series, with traditional twin line hoses also available .

In addition, Holmatro introduces three new features:

Standard on all Holmatro 4000 Series cutters, combi-tools, and spreaders, these bright LEDs prevent you from ever working in your own shadow again . Whether at night, or during the daytime when bright sunshine can cause dark shaded areas, the integrated LEDs provide illumination where its needed most . Even when scene lighting is absent, these bright lights enable you to work for about 12 continuous hours on a single AA battery .

Standard on all 4000 Series cutters and combi-tools, the integrated i-Bolt construction is characterized by its sleek, low profile design that allows the bolt to be recessed into the blade holders .

The low profile i-Bolt design provides better access innarrow spaces .

Thisinnovative,designisalsomoreefficientanduseslesstorque . Instead of compressing the blades between the softer aluminum blade holders and steel shims, the i-Bolt squeezes directly on the blades, resulting in less blade separation and a more efficient cutting process .

Thei-Boltandbladeholdersareprotected by a stainless steel cover, helping to protect them during the extrication process .

Comparedtoconventionalnuts and bolts, the i-Bolt provides improved performance with reduced size and weight .

Standard on all Holmatro 4000 Series spreaders and rams, the innovative speed valve allows spreaders to open up to 65% faster and rams open up to 35% faster . This speed valve automatically increases the opening speed of the tool, allowing for faster and more efficient tool placement, thus shortening the extrication process .

Built into the tool, not the power unit, this technology will work with your existing Holmatro power unit, and does not affect the speed or operation of other tools running on the same power unit .

When the tool meets resistance and pressure builds to 2,178 psi (150 bar), the valve automatically switches the tool back to normal speed .

Of course with the precision control of Holmatros proportional control valve, the rescuer always has the ability to feather the control handle for slow, smooth, controlled movements whenever necessary .

Up to65%

faster

4000 Series Rescue Tools

Typicalconstruction

i-Bolt technology

Integrated LED Lighting

i-Bolt Technology

Speed Valve

New Car Technology Cutters

8

NCT Cutters

specifications 4035NCT 4050NCT 4055NCT

max . blade opening 511/16 (144 mm) 71/8 (181 mm) 85/8 (219 mm)

max . cutting force 57,320 lbs (255 kN) 208,000 lbs (927 kN) 228,855 lbs (1018 kN)

weight, ready for use (twin) 34 lbs (15 .4 kg) 43 lbs (19 .5 kg) 45 lbs (20 .4 kg)

dimensions - L x W x H (twin)31 x 95/16 x 7

(799 x 236 x 190 mm)33 x 103/8 x 75/8

(858 x 264 x 194 mm)35 x 103/8 x 75/8

(895 x 264 x 194 mm)

weight, ready for use (CORE) 31 lbs (14 .1 kg) 40 lbs (18 .1 kg) 43 lbs (19 .5 kg)

dimensions - L x W x H (CORE)28 x 95/16 x 7

(731 x 236 x 190 mm)31 x 103/8 x 75/8

(789 x 264 x 194 mm)32 x 103/8 x 75/8

(825 x 264 x 194 mm)

UL Listed & UL Classified to NFPA 1936

UL Listed & NFPA Compliant



4035NCT 4050NCT

4055NCT

NCT - New Car Technology

9

114 tcutting force

More hydraulic cutting force

In rescue operations, one needs power to cut hardened materials

in modern vehicles . In addition, rescue operations require fast

working equipment that is easy to use . Holmatro engineers

designed the NCT cutter range to offer more usable cutting

force, while still utilizing the same maximum working pressure

of 720 bar (10,500 psi) . In addition, through innovative design,

manufacturing techniques and lightweight materials these NCT

cutters are stronger yet weigh less .

How does Holmatro stay at the forefront of advances

in materials and vehicle construction?

Holmatro acquires its knowledge of new car technology from a

number of sources . First and foremost, we stay in close contact

with leading manufacturers of passenger and heavy goods

vehicles . We would like to express our gratitude to all of the

manufacturers who continue to help us stay up to date on the

latest construction and design developments .

Another valuable source of information is the racing world .

Holmatro is the Official Rescue Tool of INDYCAR . New materials

and construction methods used to make cars lighter and safer are

often used first used in race cars before ending up in production

vehicles .

Last but not least, we receive input from training institutes and

rescuers worldwide about their practical experiences . Combined

with our in-house engineering knowledge, these sources help us

develop rescue tools that are able to face the reality of modern

vehicle extrication .

INDYCAR is a registered trademark of Brickyard Trademarks, Inc ., used with permission .

Cutters

10

4031

3010

4020

4035

Cutters

11

Cutters

specifications 3010 4020 4031 4035

max . blade opening 5 (146 mm) 5 (134 mm) 12 (305 mm) 93/8 (238 mm)

max . cutting force 56,920 lbs (253 kN) 63,400 lbs (282 kN) 67,600 lbs (301 kN) 67,600 lbs (301 kN)

weight, ready for use (twin) 21 lbs (9 .5 kg) 27 lbs (12 .3 kg) 33 lbs (15 kg) 34 lbs (15 .4 kg)

dimensions - L x W x H (twin) 273/16 x 81/16 x 67/16 (691 x 205 x 163 mm)

30 x 95/16 x 7 (769 x 236 x 190 mm)

32 x 95/16 x 7 (830 x 236 x 190 mm)

33 x 95/16 x 7 (851 x 236 x 190 mm)

weight, ready for use (CORE) 18 lbs (8 .2 kg) 24 lbs (10 .9 kg) 30 lbs (13 .6 kg) 31 lbs (14 .1 kg)

dimensions - L x W x H (CORE)247/16 x 81/16 x 67/16 (622 x 205 x 163 mm)

27 x 95/16 x 7 (686 x 236 x 190 mm)

30 x 95/16 x 7 (760 x 236 x 190 mm)

30 x 95/16 x 7 (781 x 236 x 190 mm)


-UL Listed &

NFPA CompliantUL Listed &

NFPA CompliantUL Listed &

NFPA Compliant

Features / Benefits

Deadmans Handle - improved one-hand operation with positive grip - accurate spring return to neutral position - proportional operation for more precise control

Non-Slip Carrying Handle - perfect grip for operation in all weather conditions

Anodized Aluminum Parts for Corrosion Protection

Rubber Sleeve Around Blade Levers - safe for operator

Unique Full Protection Against Overload

CORE Technology Standard - optional twin line

Lighted Handles* - integrated LED lights - recessed on/-off switch - light the action area and reduce shadows

i-Bolt Technology* - reduces the profile of the blade holder - more efficient cutting with less torque - helps reduce blade separation - maintains factory torque setting

*4000 Series only, not applicable for 3010 Cutter

typical construction i-Bolt technology

Mini Cutters

12

HMC 8U

CU 4007

Mini Cutters

specifications CU 4007 SMC 4006 HMC 8Ublade opening 23/16" (55 mm) 1 (25 .4 mm) 1 (40 mm) square

cutting force 49,458 lbf (220 kN) 43,500 lbf (193 .5 kN) 17,600 lbs (78 .3 kN)

weight, ready for use* 8 .5 lbs (3 .9 kg) 14 .5 lbs (6 .5 kg) 7 lbs (3 kg)

weight, ready for use(twin)

10 lbs (4 .5 kg) 16 .8 lbs (7 .6 kg) -

dimensions - L x W x H*15" x 213/16" x 55/16"

(380 x 72 x 135 mm)153/8 x 4 x 9

(389 x 114 x 234 mm)9 3/8 x 3

(240 x 75 mm)

dimensions - L x W x H(twin)

1513/16" x 213/16" x 55/16"(402 x 72 x 135 mm)

18 x 4 x 9(457 x 114 x 234 mm)

-

*single line hose, CORE Technology hose except for HMC 8U

Features / Benefits

Compact, Lightweight Design - easy to use in confined spaces

SMC 4006

Adjustable Rotating Carry Handle - simplifies cutting at various angles

Designed to Cut Round Hardened Materials - saves your rescue cutter blades

CU 4007

Blades Optimized for Both Round and Flat Profiles - suitable for many different applications, e .g . cutting car pedals, head restraints and (in USAR operations) re-bar

Push-Button Control - easy one-handed positioning and operation

HMC 8U Manual Cutter Kit

Cuts Steering Wheel Spokes, Rebar, etc.

Creates More Space Quickly and Easily

Complete Self Contained Kit - includes cutter head, hand pump, 6 foot hose and storage box

SMC 4006

Combi Tools

13

3120 4150

Combi Tools

specifications 3120 4150

spreading distance 10 (268 mm) 14 (362 mm)

spreading force 11,690 lbs (52 kN) 16,166 lbs (71 .9 kN)

cutting opening 7 (191 mm) 9 (228 mm)

cutting force in recess 49,000 lbs (218 .3 kN) 67,600 lbs (300 .7 kN)

weight, ready for use (twin) 20 .5 lbs (9 .3 kg) 34 lbs (15 .5 kg)

dimensions - L x W x H (twin) 293/8 x 81/16 x 67/16(746 x 205 x 163 mm)

33 x 95/16 x 7 (857 x 236 x 190 mm)

weight, ready for use (CORE) 17 .5 lbs (7 .9 kg) 31 lbs (14 kg)

dimensions - L x W x H (CORE)265/8 x 81/16 x 67/16(677 x 205 x 163 mm)

31 x 95/16 x 7 (787 x 236 x 190 mm)


-UL Listed &

NFPA Compliant

Features / Benefits

Multifunctional - cutting, spreading, squeezing and pulling with one tool


Unique New Blade Design - optimal cutting results, perfect spreading grip

CORE Technology Standard - optional twin line

Lighted Handles* - integrated LED lights - recessed on/-off switch - light the action area and reduce shadows

i-Bolt Technology* - reduces the profile of the blade holder - more efficient cutting with less torque - helps reduce blade separation

*4000 Series only, not applicable for 3120 Combi Tool

Spreaders

14

4240

4242

4260

4280

Spreaders

15

Spreaders


max . spreading force (at back of tip)

33,625 lbs (150 kN) 19,595 lbs (87 .2 kN) 33,000 lbs (146 .8 kN) 58,000 lbs (258 .0 kN)

max . spreading travel 273/8 (695 mm) 27 (692 mm) 32 (832 mm) 26 (675 mm)

weight, ready for use (twin) 44 .5 lbs (20 .2 kg) 42 lbs (19 kg) 58 lbs (26 .3 kg) 62 lbs (28 kg)

dimensions - L x W x H (twin)331/16 x 1111/16 x 81/8 (840 x 297 x 206 mm)

331/8 x 11 x 81/8 (842 x 297 x 206 mm)

37 x 12 x 9 (952 x 322 x 227 mm)

34 x 12 x 9 (870 x 318 x 235 mm)

weight, ready for use (CORE) 41 .5 lbs (18 .8 kg) 39 lbs (17 .7 kg) 55 lbs (24 .9 kg) 59 lbs (26 .6 kg)

dimensions - L x W x H (CORE)303/8 x 11 x 81/8

(771 x 297 x 206 mm)30 x 11 x 81/8

(773 x 297 x 206 mm)34 x 12 x 9

(883 x 322 x 227 mm)31 x 12 x 9

(801 x 318 x 235 mm)





-

1 . spreading tip2 . cutting tip3 . pulling tips with hooks4 . pulling chain set5 . storage case

1 23

4 5

Features / Benefits

Serrated Tips for Perfect Grip During Spreading and Squeezing

Quick Interchangeable Tips/Accessories


Built-In Double Check Valve



Core Technology Standard - optional twin line

Patent Pending Speed Valve for Up to 65% Faster Opening Speeds

Lighted Handles - integrated LED lights - recessed on/-off switch - light the action area and reduce shadows

Spreader Accessories

spreading pulling squeezing cutting

Up to65%

faster

Rams

16

Ram Supports

specifications HRS 22 HRS 22 NCTmax . load 49,145 lbs (218 .6 kN) 49,458 lbf (220 kN)

dimensions - L x W x H15 x 41/8 x 9

(400 x 105 x 240 mm)17 x 57/8 x 11

(450 x 150 x 280 mm)

weight, ready for use 19 lbs (8 .7 kg) 32 .75 lbs (14 .9 kg)

HRS 22HRS 22 NCT

Features / Benefits

Wider Ram Support* - for wider door sills and B-pillars of new model cars

Teeth Provide Grip* - ensures that the ram support will not slip or tilt - aids on smaller sills and B-pillars of older model cars

Crossbar Recess Helps Keep Rams Centered* - prevents tilting of ram support

Quick and Easy to Position Either Vertically or Horizontally

Contains Multiple Positioning Bars - for different ram angles

Suitable for use with all Holmatro Rams*HRS 22 NCT only

4331

4321 4322

4332

17

Rams

Rams


spreading force 36,460 lbs (162 .2 kN) 36,460 lbs (162 .2 kN) 36,460 lbs (162 .2 kN) 36,460 lbs (162 .2 kN)

number of plungers 1 2 1 2

stroke 9 (248 mm) 2 x 9 (2 x 249 mm) 13 (350 mm) 2 x 13 (2 x 350 mm)

max . length 29 (756 mm) 48 (1239 mm) 375/8 (956 mm) 64 (1639 mm)

weight, ready for use (twin) 27 lbs (12 .2 kg) 37 lbs (16 .8 kg) 31 lbs (14 .1 kg) 43 lbs (19 .5 kg)

dimensions - L x W x H (twin)1915/16 x 16 x 413/16 (507 x 407 x 122 mm)

293/16 x 16 x 413/16 (742 x 407 x 122 mm)

237/8 x 16 x 413/16 (607 x 407 x 122 mm)

371/16 x 16 x 413/16 (942 x 407 x 122 mm)

weight, ready for use (CORE) 24 lbs (10 .9 kg) 34 lbs (15 .4 kg) 28 lbs (12 .7 kg) 40 lbs (18 .1 kg)

dimensions - L x W x H (CORE)1915/16 x 135/16 x 413/16

(507 x 338 x 122 mm)293/16 x 135/16 x 413/16 (742 x 338 x 122 mm)

237/8 x 135/16 x 413/16 (607 x 338 x 122 mm)

371/16 x 135/16 x 413/16 (942 x 338 x 122 mm)





-

1110

98

7

6

54321

Features / Benefits

Rotational Grip Heads - perfect grip in any situation






Ram Accessories

1 . base plate2 . piercing point3 . wedge head4 . spare cross head5 . pulling attachment set6 . chains with hooks

Extension pipes can only be mounted on the fixed base of the 4321 and 4331

7 . extension pipe, 6 .58 . extension pipe, 139 . extension pipe, 23 .510 . storage box, small11 . storage box, large

18

Telescopic Rams

43504340

Telescopic Rams

specifications 4340 4350

max . spreading force 1st section 49,145 lbs (218 .6 kN) 49,145 lbs (218 .6 kN)

max . spreading force 2nd section 18,210 lbs (81 kN) 18,210 lbs (81 kN)

max . spreading distance 111/16 (281 mm) 2813/16 (732 mm)

piston length 1st Section 63/16 (157 mm) 1415/16 (380 mm)

piston length 2nd Section 47/8 (124 mm) 1313/16 (352 mm)

max . extended length 231/8 (588 mm) 4915/16 (1269 mm)

weight, ready for use (twin) 26 .5 lbs (12 kg) 39 .5 lbs (17 .9 kg)

dimensions - L x W x H (twin)121/16 x 16 x 5(307 x 419 x 133 mm)

211/8 x 16 x 5(537 x 419 x 133 mm)

weight, ready for use (CORE) 23 .5 lbs (10 .7 kg) 36 .5 lbs (16 .6 kg)

dimensions - L x W x H (CORE)121/16 x 13 x 5(307 x 350 x 133 mm)

211/8 x 13 x 5(537 x 350 x 133 mm)

UL Classified to NFPA 1936 NFPA Compliant NFPA Compliant

Features / Benefits

Rotational Grip Heads - perfect grip in any situation






19

Extendo Ram XR 4360

Manually Extendable - for quicker positioning - enables more precise positioning - allows you to start spreading almost immediately

Large Manual Stroke - also quickly positioned in large door openings

Manual Extension with Auto-Lock System - easy: no need to lock manually - safe: 2-step unlocking system helps avoid accidental unlocking

Unique Adjustable Carrying Handle - can be turned to left or right: easy use of ram on both sides of the vehicle

22,481 lbs Pushing Force at Every Length - no loss of power over full stroke

Compact Dimensions with Large Stroke - suitable for situations where little space is available and a large stroke is required - easy to store - fits in any opening created by any Holmatro spreader

Lightweight (compared to 4350)

Small Oil Requirement

Works on All Holmatro Mini Pumps

Features / Benefits

Unlockingstep 1: press button to left or rightstep 2: push ram in upward directionbefore pulling it down

Extendo Ram

specifications XR 4360max . working pressure 10,500 psi (720 bar)

max . spreading force 22,481 lbf (100 kN)

mechanical stroke 11" (300 mm)

hydraulic stroke 13" (350 mm)

total stroke 25" (648 mm)

retracted length 24" (622 mm)

extended length 50" (1,270 mm)

weight, ready for use (CORE) 29 .5 lbs (13 .4 kg)

weight, ready for use (twin) 32 .5 lbs (14 .8 kg)

dimensions - L x W x H24" x 8" x 65/8"

(622 x 209 x 168 mm)

oil volume required for opening 22 in (356 cc)

XR 4360

20

Hand Operated Tools

HCU 3010HCT 3120

Hand Operated Tools

specifications HCT 3120 HCU 3010

max . spreading distance 10 (268 mm) -

max . spreading force 11,690 lbs (52 kN) -

max . cutting opening 7 (191 mm) 5 (146 mm)

max . cutting force 49,000 lbs (218 kN) 56,920 lbs (253 kN)

weight, ready for use 23 lbs (10 .5 kg) 22 lbs (10 .1 kg)

folded dimensions - L x W x H 27 x 81/16 x 67/16(698 x 205 x 163 mm)

25 x 81/16 x 67/16(645 x 205 x 163 mm)

Features / Benefits

Pump and Tool in One - very compact, fits in a small space - lightweight, easy to carry and transport - easy to use

Two Stage Pump - without load higher operating speed for faster rescue operation - with load lower force needed, less fatigue

Pump Handle Foldable and Rotatable - easy carrying and storage - versatile - easy to use in confined spaces

Non-Slip Carry Handle - excellent grip in all weather conditions

Built in Double Check Valve - load will be held


Can Be Used Underwater

Multifunctional* - spreading, cutting, pulling, crushing

* HCT 3120 only

Easy to store, easy to operate in any position .

Hand Operated Power Wedge

21

Small Insertion Height with High Spreading Force - creates initial gap for other lifting or spreading equipment such as combi tools, spreaders, lifting bags, or jacks

Self Contained - pump integrated in tool, so no additional pump and hose(s) needed - easy to carry to remote locations - easy to use in confined spaces

Ergonomic Operation - tool is operated by pushing handle forward, which is a natural and efficient motion

Pump Handle Foldable and Rotatable - easy carrying and storage - versatile - easy to use in confined spaces

Hand Operated Power Wedge

specifications HPW 4624

min . insertion height " (6 mm)

max . lifting height 2" (51 mm)

spreading force 56,877 lbf (253 kN)

wedge angle 15

weight, ready for use 26 lbs (11 .8 kg)

folded dimensions - L x W x H281/16" x 105/8" x 7"

(713 x 270 x 197 mm)

Easy to store, easy to operate in any position .

HPW 4624

Features / Benefits

Compact Pumps

22

DPU 31

equipped with CORE Technology

max . working pressure 10,500 psi (720 bar)

engine 4 stroke Honda

noise level* 69 .3 dB

number of tools that can be operated simultaneously 2

capacity fuel tank 1 .3 qts (1,250 cc)

usable hydraulic oil 2 .6 qts (2,490 cc)

number of hours of continuous usage (no load) 4

output 1st stage (2x)171-183 in/min

(2,800-3,000 cc/min)

output 2nd stage (2x)34-37 in/min

(550-600 cc/min)

dimensions - L x W x H 235/8 x 117/16 x 16(600 x 290 x 425 mm)

weight, ready for use 55 lbs (25 kg)

UL Classified to NFPA 1936 NFPA Compliant

* Noise level with 2 tools at max . pressure, acc . to EN 13204: 81 .2 dB

DPU 30

DPU 30


pump type 2x two stage radial piston pumps

capacity fuel tank 1 .5 qts (1 .4 liters)

usable hydraulic oil 3 .2 qts (3 .0 liters)

output 1st stage 2 x 131 in3/min (2 x 2150 cc/min)

output 2nd stage 2 x 27 .5 in3/min (2 x 450 cc/min)

dimensions - L x W x H 195/8 x 13 x 16

(500 x 337 x 406 mm)

weight, ready for use (twin) 61 lbs (27 .6 kg)


UL Classified to NFPA 1936 NFPA Compliant

DPU 31

SPU 16

SPU16

equipped with CORE Technology

number of tool connections 1



capacity fuel tank 1 .06 qt (1,000 cc)

continuous operation 3 hours

usable hydraulic oil 1 .80 qt (1,700 cc)

pump type three stage axial

output 1st stage201-220 in/min

(3,300-3,600 cc/min)

output 2nd stage59-69 in/min

(975-1,125 cc/min)

output 3rd stage40-46 in/min

(650-750 cc/min)

weight, ready for use 37 .8 lbs (17 .15 kg)

dimensions - L x W x H207/8" x 101/4" x 15"

(530 x 260 x 380 mm)

23

Multi Tool Pumps

DPU 60 PH

DPU 60 E

MPU 60 P

DPU 60 P

specifications DPU 60 P DPU 60 PHengine 4 stroke Briggs & Stratton 4 stroke Honda

pump type 2x two stage radial piston 2x two stage radial piston

capacity fuel tank 1 .06 qts (1 .0 liters) 1 .48 qts (1 .4 liters)

usable hydraulic oil 4 .23 qts (4 .0 liters) 4 .23 qts (4 .0 liters)

output 1st stage2 x 134 in3/min

(2 x 2,200 cc/min)2 x 162 in3/min

(2 x 2,655 cc/min)

output 2nd stage2 x 30 in3/min

(2 x 490 cc/min)2 x 30 in3/min

(2 x 490 cc/min)

dimensions - L x W x H19 x 15 x 21 (502 x 400 x 553 mm)

19 x 17 x 21 (502 x 432 x 553 mm)

weight, ready for use (twin) 103 lbs (46 .8 kg) 109 lbs (49 .4 kg)

weight, ready for use (CORE) 100 lbs (45 .4 kg) 106 lbs (48 kg)


DPU 60 E

specifications DPU 60 E 115 V DPU 60 E 230 V

motor Electric motor 2 .0 hp 115V 60 Hz Electric motor 3 .0 hp 230V 60 Hz

pump type 2x two stage radial piston 2x two stage radial piston

usable hydraulic oil 4 .23 qts (4 .0 liters) 4 .23 qts (4 .0 liters)

output 1st stage 2 x 134 in3/min

(2 x 2,200 cc/min) 2 x 162 in3/min

(2 x 2,655 cc/min)

output 2nd stage 2 x 30 in3/min

(2 x 490 cc/min) 2 x 30 in3/min

(2 x 490 cc/min)

dimensions - L x W x H19 x 15 x 21 (502 x 400 x 553 mm)

19 x 15 x 21 (502 x 400 x 553 mm)

weight, ready for use (twin) 110 lbs (50 kg) 123 lbs (56 kg)

weight, ready for use (CORE) 107 lbs (48 .5 kg) 120 lbs (54 .5 kg)


MPU 60

specifications MPU 60 P MPU 60 PH MPU 60 E

motor / engine4 stroke Briggs &

Stratton4 stroke Honda

230 VAC, 12 amp, 3 .0-hp

pump type 3x two stage radial piston pump

capacity fuel tank 1 .06 qts (1 .0 liters) 1 .06 qts (1 .0 liters) -

usable hydraulic oil 5 .3 qts (5 .0 liters)

output 1st stage 3 x 129 in3/min (3 x 2,110 cc/min)

output 2nd stage 3 x 40 in3/min (3 x 660 cc/min)

dimensions - L x W x H 19 x 15 x 21 (502 x 400 x 553 mm)

weight, ready for use(twin or CORE)

111 lbs (50 .3 kg) 116 lbs (52 .5 kg) 137 lbs (62 kg)

Mini Pumps

24

2035 GU

motor 115V, 1 .5 hp 60 Hz

pump typetwo stage

radial piston pump

usable hydraulic oil 2 .1 qts (2 liters)

output 1st stage139 in3/min

(2,270 cc/min)

output 2nd stage35 in3/min

(574 cc/min)

dimensions - L x W x H19 x 143/8 x 155/8(496 x 366 x 397 mm)

weight, ready for use (twin) 74 .5 lbs (33 .8 kg)

weight, ready for use (CORE) 75 lbs (34 kg)

with twin line M105 valve 76 .5 lbs (35 kg)

UL Classified to NFPA 1936 NFPA Compliant2035 GU

TP 10 P

SP 10 P

SP 10 P(C) / TP 10 P

specifications SP 10 PC SP 10 P TP 10 Pequipped with CORE twin line twin line

number of tool connections 1 1 2

number of tools working simultaneously 1 1 1



capacity fuel tank 0 .81 qt (770 cc)

continuous operation 4 hours

usable hydraulic oil 2 .81 qt (2,660 cc)

pump type 2 x two stage radial

output 1st stage 150 in/min (2,450 cc/min)

output 2nd stage 38 in/min (620 cc/min)

weight, ready for use33 .75 lbs(15 .3 kg)

34 .25 lbs(15 .5 kg)

35 .5 lbs(16 .1 kg)

dimensions - L x W x H15" x 123/8" x 161/8"(395 x 315 x 410 mm)

SP 10 PC

Features / Benefits

Lightweight - easy to carry by one person

Compact Dimensions - easy to store

Robust Frame - protects pump during use and storage

Large Hydraulic Oil Content - pump can be used with any tool - contains enough oil to operate multiple tools successively

Hydraulic Oil Level Indication

25

Specialty Pumps

Manual Pumps

specifications HTW 300 ABU HTW 700 ABU FTW 1800 HTW 1800 HTT 1800

pump 2 stage hand 2 stage hand 2 stage foot 2 stage hand 3 stage hand

max . output per stroke 0 .3 in3 / stroke 0 .6 in3 / stroke 1 .7 in3 / stroke 1 .7 in3 / stroke 1 .7 in3 / stroke

usable oil contents 0 .32 qts 0 .74 qts 1 .9 qts 1 .9 qts 1 .9 qts

weight, ready for use 9 lbs 17 .5 lbs 25 .3 lbs 25 .3 lbs 39 lbs

Air Powered Pump

specifications AHS 1400 FDU

pump type air-powered hydraulic pump

max . output per stroke 58 in3 / min

usable oil contents 1 .5 qts

weight, ready for use 15 lbs

HTW 300 ABU HTW 700 ABU FTW 1800 HTW 1800 HTT 1800

AHS 1400 FDU

Diesel Powered Pumps

specifications 2075 Diesel Duo

engine Yanmar diesel engine

pump type 2 stage radial piston pump

usable oil contents 2 .6 qts (2 .5 liters)

fuel tank capacity 0 .66 gal (2 .5 liters)

output 1st stage67 - 79 in/min

(1,100 - 1,300 cc/min)

output 2nd stage30 - 37 in/min

(500 - 600 cc/min)

dimensions - L x W x H221/8 x 17 x 22(562 x 451 x 565 mm)


Two Stage Pump - enables faster tool operation when possible and maximum power when needed

High Stability

Balanced Oil Flow

Constant Working Pressure

Non-Toxic Mineral Oil

Perfect for Shipboard Operations

Features / Benefits

2075

26

Hoses & Hose Reels

CORE Technology Hydraulic Hose

bend restrictors black injection molded rubber

standard available lengths 16, 32 & 50 ft (5, 10 & 15 m)

primary featuresshielded pressure CORE & auto return valve

built into coupler

available colors orange, green, blue, black

complies with NFPA 1936 YES

Electric Rewind Hose Reels

specifications DHR60C DHR100C DHR100

weight, ready for use (including hose) 74 lbs (33 .6 kg) 89 lbs (40 .5 kg) 78 lbs (35 .4 kg)

motor 12VDC 12VDC 12VDC

dimensions - L x W x H19 x 175/8 x 181/8

(483 x 448 x 460 mm)19 x 21 x 181/8

(483 x 546 x 460 mm)20 x 19 x 181/8

(521 x 583 x 460 mm)

finish available painted or polished steel painted or polished steel painted or polished steel

length of hose 60 ft (18 m) 100 ft (30 m) 100 ft (30 m)

availability CORE Technology CORE Technology twin line

DHR100DHR100CDHR60C

Black Rubber Hydraulic Hose

bend restrictors plastic type in five colors

standard available lengths 16, 32 & 50 ft . (5, 10 & 15 m)

primary feature excellent flexibility, even in cold weather

available colors black with color coded bend restrictors


Thermoplastic Hydraulic Hose

bend restrictors spring type

standard available lengths 16, 32 & 50 ft . (5, 10 & 15 m)

primary feature excellent abrasion & cut resistance

available colors red, green, blue, black


Bend Restrictors

CORE Technology Bulkhead Fitting

27

Available in Two Versions - straight or 90 design for maximum versatility and customization

Ultra Compact - saves compartment space

Allows Remote Connection - in bumper - inside compartments - on outside of apparatus - with or without cover

Easy Installation - installation template included in instruction manual

Allows Plug and Play - connect any standard length CORE Technology hose and rescue tools

Features / Benefits

Straight Bulkhead Fitting 90 Bulkhead Fitting

For external applications we recommend the use of the cover & mounting plate to protect the coupler from road dirt and debris .

Typical Installations

Mounting plate (spacer) located on the outside of the truck wall or bumper . With the 90 bulkhead fit-ting, this configuration requires only 2 depth behind the wall .

Mounting plate (spacer) located on the inside of truck wall . Cover is flush with the truck body .

28


7 . Carry Strap8 . Soft Carry Pack9 . DC Power Cord (12V - 24V DC input)10 . Pulling Chains11 . Pulling Adapters12 . Mil . Spec . Cable

1 . Additional Batteries2 . Battery Pouch3 . Pelican Case4 . Soft Side Case5 . 12V DC Battery Charger6 . 120V AC Battery Charger

1

11109

8765

432


specifications BCT 4120 Combi BCU 4010 Cutter

max . spreading travel 10 (268 mm) -

max . spreading force ( at back of tips) 11,690 lbs (52 kN) -

max . cutting force (in notch) 49,000 lbs (218 kN) 56,920 lbs (253 kN)

max . cutting force (blade center) 18,660 lbs (83 kN) 22,930 lbs (102 kN)

max . pulling force 6,600 lbs (29 .3 kN) -

max . pulling distance 127/8 (327 mm) -

dimensions - L x W x H 28 x 12 x 9

(712 x 305 x 230 mm)26 x 12 x 9

(659 x 305 x 230 mm)

weight, ready for use 34 lbs (15 .4 kg) 33 lbs (14 .7 kg)

Packages

package qty. componentdescription

Standard

1 BCT 4120 Combi or BCU 4010 Cutter

1 120V AC Charger

2 24 Volt Batteries

1 Carry Strap

Deluxe

1 Standard Package

1 Pelican Case withcustom inserts

1 DC Power Cord

BCT 4120 BCU 4010

Accessories

12

29

Rescue Assist Tools

Hydraulic Door Opener

specifications HDO 100

stroke 51/8 (130 mm)

spreading force 22,500 lbs (100 kN)

weight, ready for use* 14 .5 lbs (6 .6 kg)

dimensions - L x W x H*11 x 4 x 4

(299 x 120 x 102 mm)

*tool only

HDO 100

Concrete Crusher

specifications CC 20


max . opening 91/16" (230 mm)

squeezing force 15,287 lbf (68 kN)

weight, ready for use (CORE) 50 lbs (22 .6 kg)

weight, ready for use (twin) 53 lbs (24 kg)

dimensions - L x W x H (CORE)345/8" x 175/16" x 8"

(880 x 440 x 210 mm)

dimensions - L x W x H (twin)36" x 175/16" x 8"

(915 x 440 x 210 mm)

Heavy-Duty - designed to quickly break away large, thick pieces of concrete

Limited Dust - supports a clear view at the rescue scene

No Vibrations - reduces risk of secondary collapse

Low Noise

Features / Benefits

Complete Self Contained Kit - HDO100 Door Opener - HTW300 Hand Pump with 6 (2 m) hose - storage case

Rotating Hose Connection - pigtail hose with continuous swivel and locking quick-connect coupler - swivel handle

Features / Benefits

CC 20

30

High Pressure Lifting Bags


modelmax. effectivelifting force*

max. inflation height

dimensions(L x W)

weight thickness air volume

HLB1 2,247 lbs (1 t) 3 .1 (80 mm)6 x 6

(150 x 150 mm)1 .3 lbs(0 .6 kg)

7/8 (22 mm) 6 .3

HLB3 7,866 lbs (3 .6 t) 5 .1 (130 mm)9 x 9

(228 x 228 mm)3 .3 lbs(1 .5 kg)

7/8 (22 mm) 16 .2

HLB5 11,237 lbs (5 .1 t) 5 .9 (150 mm)11 x 11

(270 x 270 mm)4 .4 lbs(2 kg)

7/8 (22 mm) 22 .5

HLB10 22,473 lbs (10 .2 t) 8 .5 (215 mm)15 x 15

(380 x 380 mm)8 .4 lbs(3 .8 kg)

1 (25 mm) 76 .5

HLB12 26,968 lbs (12 .2 t) 8 .9 (225 mm)16 x 16

(408 x 408 mm)11 lbs(5 kg)

1 (25 mm) 90

HLB18 40,452 lbs (18 .3 t) 9 .4 (240 mm)26 x 15

(660 x 360 mm)15 lbs

(6 .8 kg)1 (25 mm) 171

HLB20 44,754 lbs (20 .3 t) 11 .4 (290 mm)20 x 20

(508 x 508 mm)14 .8 lbs(6 .7 kg)

1 (25 mm) 189

HLB24 53,793 lbs (24 .4 t) 8 .5 (215 mm)13 x 40

(310 x 1000 mm)20 .9 lbs(9 .5 kg)

1 (25 mm) 216

HLB32 71,914 lbs (32 .6 t) 15 (380 mm)26 x 26

(658 x 658 mm)28 .7 lbs(13 kg)

1 (25 mm) 450

HLB40 89,728 lbs (40 .7 t) 15 .9 (405 mm)28 x 28

(708 x 708 mm)33 .3 lbs(15 .1 kg)

1 (25 mm) 558

HLB67 149,914 lbs (68 t) 20 .5 (520 mm)36 x 36

(908 x 908 mm)51 .8 lbs(23 .5 kg)

1 (25 mm) 1206

* All ton specifications for lifting bags are listed in metric tons . A metric ton is 2,204 lbs


HLB1

HLB3

HLB5

HLB10

HLB12

HLB20

HLB32

HLB40

HLB67

HLB18

HLB24

31

Bags Included in Packages

pkg . # HLB1 HLB3 HLB5 HLB10 HLB12 HLB18 HLB20 HLB24 HLB32 HLB40 HLB67

pkg . 9 1 1 1

pkg . 32 1 1

pkg . 42 1 1

pkg . 44 1 1

pkg . 52 1 2

pkg . 56 1 1 1

pkg . 64 1 1 1

pkg . 120 1 1 1 2

pkg . 245 1 1 1 1 2 1 1

model accessories

SORV10Ushut-off hoses with built in pressure relief valve

PRV 120 Upressure regulator for low pressure SCBA only

HPRV 120 Upressure regulator for high pressure SCBA only

SCV 10 U single control unit

DCV 10 U dual control unit

HDC 10 U heavy duty dual control unit

SORV 10U

HPRV 120 U

SCV 10 U DCV 10 U

HDC 10 U


High Pressure Lifting Bag Accessories

Air hoses available with or without shut-off & pressure relief valve, in 10 ft (3 m),16 ft (5 m), 32 ft (10 m) lengths .

air hoses

Eleven Sizes Available - a lifting bag for every job

Now with Reflective Markings for Better Night Visibility

Revolutionary New Non-Slip Design - maximum grip on all surfaces - interlocking when 2 bags are used on top of each other

Unique Low Profile Edges - easy insertion with minimal clearance

Reinforced with 3 Para-Aramid Inlays - lightweight - highly flexible - proven durability

Centering Cross on Both Sides

Chemical and Ozone Resistant

Carrying Straps on HLB 40 and HLB 67 are Mounted in Threaded

Connection Holes

Features / Benefits

storage case

Low Pressure Lifting Bags

32


specifications LAB 4 U LAB 6 U LAB 9 U LAB 16 U

lifting capacity (per pair) 8,800 lbs 13,250 lbs 19,850 lbs 35,300 lbs

dimensions in storage bag (L x W) 27 x 27 33 x 33 411/3 x 411/3 52 x 52

weight, per pair 20 lbs 42 lbs 61 lbs 154 lbs

height deflated 21/3 21/3 21/3 21/3

height inflated 243/8 243/8 243/8 243/8

air contents (per pair) 16 ft 25 ft 36 ft 65 ft

contents item quantity

storage bag A 1

lifting bags of equal capacity B 2

special low pressure hose C 2

10 ft . yellow air hose D 1

twin air flow control unit E 1

pressure regulator for SCBA bottle F 1

repair kit G 1

A B

C D

E G

4 Sizes Available - a lifting bag for every job

Top and Bottom Surface Reinforced - wear-resistant - non-slip

High Chemical Resistance

Features / Benefits

Low Pressure Lifting Bag Accessories


F

33

Power Wedge

specifications 3624

min . insertion (6 mm)

lifting height 2 (50 mm)

lifting force 48,100 lbs (214 kN)

weight, ready for use (twin) 24 .25 lbs (11 kg)


dimensions - L x W x H (twin) 28 x 9 x 8 (711 x 230 x 203 mm)

dimensions - L x W x H (CORE) 25 x 9 x 8 (642 x 230 x 203 mm)

3624

Lifting Solutions

Aluminum Jacks

specifications HLJ 50 A 6 HLJ 50 A 10

lifting capacity 114,750 lbs (510 kN) 114,750 lbs (510 kN)

closed length 6 (150 mm) 7 (196 mm)

stroke 23/8 (61 mm) 4 (104 mm)

weight, ready for use 15 .5 lbs (7 kg) 20 lbs (9 kg)

Toe-Jack

specifications TJ3610

max . capacity (in the middle of saddle)

26,500 lbs (12 metric tons)

max . force (on toe) 22,000 lbs (10 metric tons)

lifting height / plunger stroke 10 (250 mm)

closed height 175/8 (448 mm)

min . insertion height toe 2 (56 mm)


set A

set B

HLJ 50 A6 HLJ 50 A10

TJ 3610

Chocks & Blocks

componentapprox. dimensions

(L x W x H)set A qty.

set B qty.

step chock24 x 6 x 10

(622 x 152 x 273 mm)2 -

small 3 (75 mm) wedge9 x 3 x 3

(229 x 76 x 76 mm)2 2

large 6 (150 mm) wedge9 x 6 x 3

(229 x 152 x 76 mm)2 2

thin lock block9 x 9 x 1

(229 x 229 x 25 mm)- 2

medium lock block9 x 9 x 2

(229 x 229 x 51 mm)- 2

thick lock block9 x 9 x 3

(229 x 229 x 76 mm)- 2

34

PowerShore Stabilization Systems

Struts with Hydraulic Cylinder

modelretracted

lengthstroke weight

working pressure

force at working pressure

oil contents @ max. stroke

HS 1 Q 5 FL 25 (632 mm) 10 (252 mm) 22 .7 lbs (10 .3 kg) 10,500 psi (720 bar) 22,400 lbf (99 .8 kN) 21 .11 in (346 cc)

HS 1 Q 10 FL 43 (1,092 mm) 10 (252 mm) 28 .7 lbs (13 kg) 10,500 psi (720 bar) 22,400 lbf (99 .8 kN) 21 .11 in (346 cc)

HS 1 L 5 + 22 .6 (575 mm) 10 (252 mm) 20 .3 lbs (9 .2 kg) 10,500 psi (720 bar) 22,400 lbf (99 .8 kN) 21 .11 in (346 cc)

HS 1 L 10 + 41 (1,035 mm) 10 (252 mm) 26 .2 lbs (11 .9 kg) 10,500 psi (720 bar) 22,400 lbf (99 .8 kN) 21 .11 in (346 cc)

Struts with Pneumatic Cylinder

modelretracted

lengthstroke weight

working pressure

force at working pressure

max. air contents @

116 psi (8 bar)

AS 3 Q 5 FL 25 (632 mm) 10 (252 mm) 18 .5 lbs (8 .4 kg) 116 psi (8 bar) 900 lbf (4 kN) 0 .72 ft3 (20 .4 )

AS 3 Q 10 FL 43 (1,092 mm) 10 (252 mm) 24 .7 lbs (11 .2 kg) 116 psi (8 bar) 900 lbf (4 kN) 0 .72 ft3 (20 .4 )

AS 3 L 5 + 22 .6 (575 mm) 10 (252 mm) 16 .1 lbs (7 .3 kg) 116 psi (8 bar) 900 lbf (4 kN) 0 .72 ft3 (20 .4 )

AS 3 L 10 + 41 (1,035 mm) 10 (252 mm) 22 .3 lbs (10 .1 kg) 116 psi (8 bar) 900 lbf (4 kN) 0 .72 ft3 (20 .4 )

PowerShore is a patented and versatile shoring system consisting of many lightweight components that can be coupled quickly . A broad range of accessories and many cylinder and extension pipe lengths allows for quick and easy shoring of vehicles, trenches and buildings . Cylinders are available with integrated pneumatic and mechanical struts, or powerful hydraulic cylinders with tremendous lifting capacity . All struts have female socks on both ends for quick attachment of our snap-on system saddles and extensions .

Struts with Pneumatic CylinderStruts with an integrated pneumatic cylinder have a maximum working pressure of only 116 psi, making them suitable for use with bottled air or compressors . The pneumatic operation offers rapid placement as well as limited lifting capacity .

Struts with Hydraulic CylinderStruts with an integrated hydraulic cylinder are activated using an external, single acting hand pump for precise control . With a maximum working pressure of 10,500 psi (720 bar) these struts have incredible lifting capacity of up to 22,400 lbf (99 .8 kN) . Retracting the cylinder is assisted by a spring return when hydraulic pressure is released, using a needle valve on the pump .

Pneumatic and Hydraulic Struts come in two versions:

Q Quick lock versions incorporate a plunger with an automatic locking mechanism in 9 mm steps (3/8) . The integrated spacer, a spring operated flex mechanism, has a 13 mm stroke . This space is compressed to overcome one step of the quick lock system, pretensioning the strut to a maximum of 900 lbf (4 kN) . Releasing the locking mechanism is required before retracting the plunger .

L Lock Nut versions have a threaded plunger and lock nut . When the plunger is extended the lock nut may be manually secured at virtually any length . This provides positive locking at virtually any length and the cylinder pressure may be released without destabilizing the strut . Axial displacementper rotation of the lock nut is 16 .5 mm .

HS 1 Q 5 FL

HS 1 L 5+

AS 3 Q 5 FL

AS 3 L5+

35

Extension Pipes

modelapprox. length

color code

weight working load

SX 1 5 (125 mm) white 3 .3 lbs (1 .5 kg) 11 .2 t (100 kN)*

SX 2 10 (250 mm) blue 4 .19 lbs (1 .9 kg) 11 .2 t (100 kN)*

SX 5 20 (500 mm) yellow 6 .17 lbs (2 .8 kg) 11 .2 t (100 kN)*

SX 10 39 (1,000 mm) green 10 .14 lbs (4 .6 kg) 11 .2 t (100 kN)*

SX 15 59 (1,500 mm) red 14 .11 lbs (6 .4 kg) 11 .2 t (100 kN)*

FX 1 5 (125 mm) - 3 lbs (1 .4 kg) 11 .2 t (100 kN)*

* depending on total length

Mechanical Struts

modellocking system

retracted length

stroke weight

MS 2 L 2 + thread 9 .8 (250 mm) 4 .7 (120 mm) 7 .7 lbs (3 .5 kg)

MS 2 L 5 + lock nut 22 .6 (575 mm) 10 (252 mm) 14 .8 lbs (6 .7 kg)

PowerShore Stabilization Systems

Mechanical StrutsWith no air or hydraulics required, mechanical struts offer quick, adjustable placement and stabilization . Female receptors on both ends allow mechanical struts to be used with extensions and snap-on saddles .

ThreadThe strut is extended and retracted via integral threads, making it self-retaining . Axial displacement per strut rotation is 16 .5 mm (5/8) .

Lock NutThe plunger is manually extended and the lock nut is used to secure the strut in place . Axial displacement per lock nut rotation is 16 .5 mm (5/8) .

Extension PipesExcept for the FX 1, all extensions are equipped with a male snap-lock on one end and a female on the other . The FX 1 is a double female that is used for connecting saddles to the male end of an extension pipe . This is useful for making a fixed strut using only extension pipes and saddles .

MS 2 L 5+

MS 2 L 2+

SX 1

FX 1

SX 2

SX 5

SX 10

PowerShore Sets

PowerShore Vehicle Stabilization KitThe vehicle stabilization kit includes base plates tensioning belts and a variety of extension pipes, connectors and saddles . Assemble to length and cinch the belts for rapid vehicle stabilization . All components may be used to expand the capabilities of other kits .

PowerShore Trench KitUsing a PowerShore air strut trench kit offers rescuers the ability to shore a trench before getting into it . Using the included Velcro straps to lower the assembled struts, remote air controllers extend the struts in place before rescuers enter . Lock nuts mechanically secure the air struts in place so air pressure is no longer required and hoses may be removed . PowerShore Structural Collapse KitsTwo structural collapse kits are available to serve a variety of needs . The basic pneumatic kit comes complete with air struts . For greater lifting capacity we also offer a kit that combines mechanical struts with hydraulic struts . All kits are complete with extensions, saddles, wrenches and the required hoses and controllers needed to operate the included struts .

PowerShore Accessories

36

PowerShore Accessories

description photo description photo

Flat Head - AluminumFor support against flat surfaces .

0 .66 lbs (0 .3 kg), 3 .5 (89 mm)

Pointed HeadFor use in narrow gaps .

1 .3 lbs (1 .2 kg), 3 .5 (89 mm)

Flat Head with Nailing Plate - AluminumFor support against flat surfaces, with nailing holes .

1 .76 lbs (0 .8 kg), 6 x 6 (150 x 150 mm)

Base Support PlateCan support 3 swivel heads and is suitable for the use of up to 3 tensioning belts to create a stable triangle .

3 .2 lbs (2 .8 kg)

Tilting Head - AluminumFor support on uneven or tilting surfaces . Max . angle 45 in all directions .

3 .75 lbs (1 .7 kg), 3 x 3 (95 x 95 mm)

Trench Support Plate - Zinc Plated SteelCan be nailed to wooden plates to support 2 swivel heads in a trench .

2 lbs (0 .9 kg), 11 x 4 .3 x 3 (280 x 110 x 75 mm)

Tilting Head with Nailing Plate - AluminumFor support on uneven or tilting surfaces . Max . angle 45 in all directions .

5 .5 lbs (2 .5 kg), 6 x 6 (150 x 150 mm)

Tensioning BeltLength 4 m, width 25 mmweight 1 .4 kg, load 10 kN

Beam Support HeadFor use with beams up to 4 (100 mm), with nailing holes .

2 .65 lbs (1 .2 kg)

Adjustable Hook WrenchTo create a pre-load with the MS 2 L 2+ . Two pieces are advised .

Beam Support HeadFor use with beams up to 6 (150 mm), with nailing holes .

3 .75 lbs (1 .7 kg)

Storage/Carrying Bag for Accessories

L-Support HeadFor use with wide beams, with nailing holes .

2 .2 lbs (1 kg)

Storage/Carrying Bag for Struts and Extensions

Swivel Head - AluminumCan be placed in almost any position and against each other for mutual support .

4 .4 lbs (2 kg)

Anti-Roll BlockPrevents struts and extensions from rolling on uneven surfaces and protects against dirt and damage .

V-Block Head Small - AluminumFor support of pipes .

1 .5 lbs (0 .7 kg), 3 .5 (89 mm)

3-Way Swivel HeadContains 3 integrated swivel heads for use with up to 3 shoring lines in various directions .

V-Block Head Large - AluminumFor support of pipes .

3 .75 lbs (1 .7 kg), 5 x 4 (141 x 100 mm)

2-Way BlockTo support 2 tilting heads .

Cone HeadFor support on concrete or steel surfaces .

1 .1 lbs (0 .5 kg), 3 .5 (89 mm)

Field Service KitKit includes the following items in a storage box: Tools, Couplers, Velcro Straps, Spare Parts, Hook Wrench

Cross HeadFor use on many kinds of surfaces .

2 .2 lbs (1 .1 kg)

Base Plate with Shackle AttachmentA stable and economical anchor point for tensioning straps .

All accessories to be used on struts and extension pipes are equipped with a male snap lock system .

Training Materials

37

Vehicle Extrication Techniques (VET) CD-ROM

Full menu navigation allows this multimedia CD-ROM to function as an instructors guide . A complete course in basic extrication and rescue tool handling . Perfect accompaniment to the VET book . Includes photos, diagrams and video footage of the most up-to-date extrication techniques .

Vehicle Extrication Techniques (VET) Book

A guide to rescue tool handling and extrication techniques . 100 pages of step-by-step instruction in vehicle extrication using photos and custom diagrams . Excellent self study reference guide . Also available in Spanish and Portuguese .

Emergency Shoring and Lifting Techniques Book

Designed to be used by any department that has shoring equipment, the graphics and diagrams cover all aspects of the shoring system as well as situation specific step-by-step rescue procedures . Whether your department will be using shoring primarily for vehicle stabilization, collapse rescue or trench rescue, all of the latest techniques are covered in detail . This is a great resource for in-service training or ongoing refresher training .

Rescuers Guide Book & CD-ROM Bundle

With over 1,000 pages, this book details the location of potential hazards on vehicles sold in North America since 1985 through 2009 . The book also comes bundled with a free copy of the CD-ROM version . CD-ROM is also available separately .

New Vehicle Safety Systems Training DVD

Emergency responders need to be aware of the complexities and risks presented by vehicle safety systems . This training aid provides an overview of the hazards found in todays automobiles .

For more information or to purchase please visit:http://www.holmatro-usa.com/t-materials

Service by Holmatro

Rescue equipment, more than any other type of equipment, must be reliable and perform well under all circumstances . That is why Holmatro rescue tools comply with all important international safety norms such as NFPA 1936 and EN 13204 . In many countries occupational health and safety legislation holds employers responsible for the safety of the equipment used by their staff . To ensure the reliability and safe operation of our products during their whole lifespan we support users of Holmatro rescue tools worldwide through our well-trained global dealer service network . This reflects our philosophy of being more than just a supplier: we strongly believe in long-term partnerships with our customers . Holmatro dealers are factory trained and certified, authorizing them to provide service according to our high-quality standards .

AdvantagesRegular testing and maintenance of your rescue equipment by an authorized Holmatro dealer offers you many advantages: It ensures the safety of your rescue equipment for years to come . It allows your tools to work longer for you and makes your investment last longer . Holmatro dealers work with original, high-quality spare parts . Holmatro dealers have their own spare parts stock (and quick access to the large stock at Holmatro) which minimizes the down time of your tools . Holmatro dealers are factory trained, know the latest technological developments and have direct contact with factory engineers; they are the best rescue tool service specialists in the market . Last but not least, by outsourcing service you can keep focusing on your core business: saving lives!

Training & Certification of DealersConsidering rescuers critical tasks they deserve the best pos-sible service when it comes to the selection, use and mainte-nance of their equipment . Therefore every Holmatro dealer is factory trained . Our compulsory training program includes not only repair & maintenance training, but also product & applica-tion training and basic rescue technique education . Training sessions are organized on a regular basis to ensure that Hol-matro dealers stay up-to-date with the latest developments . Successful completion of these sessions is required to remain a Holmatro certified dealer service technician .

Holmatro dealers can help you select the right equipment for specific application and provide services that help ensure op-timal functionality and safety of your rescue tools . Periodic check-ups help prevent expensive repairs and keep you oper-ating with safe and reliable equipment .

Service

38

How can a Holmatro dealer help you?Your local Holmatro dealer is more than a sales outlet for res-cue equipment . Every Holmatro dealer is your local resource and partner who can offer you a wide range of services .

Advice on the best tools for specific applications . Warranty repairs, modifications and upgrades for your

Holmatro rescue equipment . Your resource for genuine Holmatro spare parts and

maintenance supplies . A partner who can show you how to perform daily main-

tenance checks of your rescue equipment, helping ensure that your rescue tools are always in ready-for-use condi-tion (maintenance after every use) .

Hands-on rescue tool training . Basic vehicle extrication techniques training . Emergency stabilization and shoring techniques training . Demonstrations of the latest products, innovations and

techniques, to help keep you current . Presentations on special applications or other rescue re-

lated topics . For example, a presentation on the impact of new car technology on rescue tools and techniques .

Service

39

Some Holmatro dealers can provide service on location .

Periodic testing and maintenance of your equipment ensures optimal safety and performance throughout its lifespan .

For more information, please contact your local dealer:See www.holmatro-usa.com/locate

Holmatro 2011 - 988 .000 .014 - 0611 Technical modifications reserved .

Holmatro NetherlandsRaamsdonksveer, The NetherlandsManufacturing, Sales & Service

Holmatro PolandWarsaw, PolandSales & Service

www .holmatro-usa .com

Holmatro ChinaShanghai, ChinaSales & Service

Holmatro, Inc.Manufacturing, Sales & Service

505 McCormick DriveGlen Burnie, MD 21061

tel: 410-768-9662fax: 410-768-4878

Holmatro Group HeadquartersRaamsdonksveer, The Netherlands

Holmatro UKNottingham, EnglandSales & Service

About HolmatroHolmatros Testing ProgramInnovationsCORE Technology4000 Series Rescue ToolsNew Car Technology CuttersCuttersMini CuttersCombi ToolsSpreadersRamsTelescopic RamsExtendo Ram XR 4360Hand Operated ToolsHand Operated Power WedgeCompact PumpsMulti Tool PumpsMini PumpsSpecialty PumpsHoses & Hose ReelsCORE Technology Bulkhead FittingSelf Contained Rescue ToolsRescue Assist ToolsHigh Pressure Lifting BagsLow Pressure Lifting BagsLifting SolutionsPowerShore Stabilization SystemsPowerShore AccessoriesTraining MaterialsService

2011 Catalog Rescue Equipment

Documents

Transcript of 2011 Catalog Rescue Equipment