Home appliances based embedded project

Code Project titlesNT 01 GPS based Vehicle Tracking System and guided robot to the target with shortest

path estimation.

NT 02 Embedded Based Car digital Dashboard

NT 03 Direction detector of an emergency vehicle with safety warning system.

NT 04 Design of 1-wire digital thermometer and inter integrated circuit I2C protocol with

Real time clock.

NT 05 Wireless Networking of smoke detector with voice alerts.

NT 06 Embedded based clap operated home Appliances control

NT 07 DTMF based home automation control from mobile phone

NT 08 Density based intelligent traffic light controller with PC data base

NT 09 Embedded based Coin operated mobile charging system.

NT 10 Vehicle over speed control & drunken drive alert system.

NT 11 Embedded system based Electronic globe

NT 12 RFID based vehicle authentication system

NT 13 Improved railway controller application programming.

NT 14 Embedded based automatic toll gate collector with PC

NT 15 PIC and PC based Intelligent Bus Fare Information System

NT 16 Bank Locker Security With Mobile Alert through voice announce

NT 17 Embedded based Irrigation control with dry run prevention

NT 18 Embedded based gas leakage identification with power inter lock

Robotics ProjectsCode Project titles

RA01 Embedded based Hazardous robot for industry

RA02 Telephone operated Robot with help of DTMF and PIC

RA03 Spy robot using PIC and PC

RA04 PC based Robot for different position control.

RA05 Fabrication of Pneumatic Pick and Place Robot in textile industry.

RA06 Crack detector Robot in Railway Department.

RA07 Solar panel Tracking Robot

RA08 Fingerprint operated multipurpose robot in industrial and nuclear plants

RA09 Crane operating Robot through PC

RA10 Object Tracking Robot using Sensor.

RA11 Artificial intelligent (Fuzzy logic)based Automatic path finding Robot

RA12 Embedded based wireless missile launcher for war field applications

RA13 RF Based Vehicle Tracking System by using robot.

RA14 Microcontroller based multipurpose stepper motor action controller for Robots.

RA15 Embedded based conveyer controlled robot in mine and industry.

RA16 PC operated solar based multi purpose robot

RA17 War field tanker controlled robot with human finger print security

Bio-Metric based Projects

Code Project titlesBM01 Finger Print Based Medical Information System For Patient

BM02 ATM theft identification using human finger print

BM03 Car security system using authorized human finger print

BM04 Bank security system using human finger print

BM05 Wireless data cryptography using human finger print in communication field

BM06 Railway / flight ticket reservation using human finger print

Wireless Communication System

Code Project titlesWC01 Wireless based distribution Transformer Monitoring and control System from

substation

WC02 Vehicle Accident Identification System with auto dialer using DTMF.

WC03 Bio signal Monitoring and control System

WC04 Encryption and decryption based Secured Communication For Military

Applications

WC05 Intelligent Controller For thermal plants

WC06 Embedded based boiler automation in thermal plants

WC07 Smart Antenna & Low Power RF Transceiver

Security System

Code Project titlesSS01 Embedded based electric fencing

SS02 GSM based industrial security system

SS03 RFID based shopping trolley

SS04 RFID based air port travel bag identification

PC Interactive Projects

Code Project titlesPC01 Stepper motor control via parallel port of PC.

PC02 8- Character Running message display with help of LCD.

PC03 Data Acquisition using PC

PC04 PC Based Soft Starter

PC05 Voice Enabled Robotic Activation using RF

Bio-Medical based Projects

Code Project titlesBMD1 Heart Beat Checker for patient in ICU.

BMD2 IGBT Based High Frequency Water Purifier.

Code Project Titles Year

BT01 A Wrist and Finger Force Sensor Module for Use during Movements of the Upper Limb in Chronic Hemi paretic Stroke

2009

BT02 Circuit and Coil Design for In-Vitro Magnetic Neural Stimulation Systems

2008

BT03 A Wireless-Implantable Micro system for Continuous Blood Glucose Monitoring

2008

BT04 Determination of Sit-to-Stand Transfer Duration Using Bed and Floor Pressure Sequences

2008

BT05 Wireless E jacket for multi parameter Bio-physical Monitoring and telemedicine application

2009

General Monitoring, Control and Automation

Code Project titlesGMC01 Agriculture plant water supply and dry run prevention.

GMC02 Personalized Identifier and access control system-using PC.

GMC03 Yarn Lee Strength Measurement

GSM based Projects

Code Project titlesGSM01 Data acquisition using GSM

GSM02 Car security system using GSM

GSM03 Railway Accident avoid Monitoring system

GSM04 Home security system using GSM

GSM05 GSM based Home automation

GSM06 Electricity Billing through GSM

GSM07 Voting Machine through GSM

GSM08 Industrial monitoring system using GSM

PLC based project

Code Project titlesPLC01 Elevator control system

PLC02 Escalator control system

PLC03 Material handling system

PLC04 SCADA-PLC interfacing design solution

Electrical projects

Code Project titlesEP01 Embedded based cyclo converter

EP02 Embedded based Boost converter

EP03 Embedded based Buck Converter

EP04 Embedded based voltage commutated chopper

EP05 Embedded based DC motor speed control using SCR

EP06 Embedded based AC motor speed control using SCR

PLCC based application

Code Project titlesPLCC01 PLCC based data acquisition system

PLCC02 PLCC based networking

PLCC03 Intelligent based traffic signaling system

PLCC05 Device control using PLCC

PLCC06 Security system using PLCC

PLCC07 Biomedical data collection system through PLCC

PLCC08 Microcontroller based paying system through PLCC

PLCC09 Overflow indication of tanks in dams through PLCC

PLCC10 Microcontroller based stepper motor action control through PLCC

PLCC11 Sequential process control through PLCC

PLCC12 Data communication using PLCC

PLCC13 Voice communication using PLCC

PLCC14 Railway signaling system using PLCC

PLCC15 PLCC intercom

PLCC16 Closed loop control system

PLCC17 Accident identification system

PLCC18 Street light control system

PLCC19 PLCC remote controller

PLCC20 Alarm system for college

Industry based Embedded Project

Code Project titlesIEO1 Furnace/gas leakage monitoring and control for industrial application

IE02 Microcontroller to microcontroller communication with lcd using MSSP

IE03 Embedded based multiple parameter measurement system in windmill

IE04 Microcontroller based automatic boiler temperature controller for industry

IE05 Advanced security system for industry with encryption technic using microcontroller

IE06 Public address system with specific target speech processing technic

IE07 First fault announcing system for industries with voice announcement

IE08 Fire detection and extinguishing system for industrial safety

IE09 Microcontroller based data acquisition system to pc

IE10 Automatic fluid level monitoring on/off control with dry alert Bottle filling machine with automatic variable quantity filling system

IE11 Lift control automation

IE12 Hi tech car parking system with priority based slot allocating system

IE13 I2c based multipheripherals interfacing system

IE14 I2c based distributed embedded system

IE15 Dc motor speed control system using PWM

IE16 Wireless controller for dc motor

IE17 Fuzzy logic based quality control conveyer with identification of good and bad product

IE18 Embedded based energy saving conveyor control system for industries

IE19 Embedded based frequency monitor control system for economic power management

IE20 Microcontroller based maximum demand controller for industries with Lcd displays

IE21 Microcontroller based induction motor speed controller through wireless communication

IE22 Microcontroller based fault recognition in power transmission lines

IE23 Closed loop control for stepper motor

IE24 Production monitoring/control system through pc

IE25 Embedded based diagnosis of failed distribution transformer with fault status indicator

IE26 Embedded based energy saver using pressure controller

IE27 Embedded based finger print recognisation for industrial/college attendance system

IE28 Security integrated system based on wireless acess protocol for remote monitoring control

IE29 Intelligent road transport monitoring system

IE30 Extensible embedded web server architecture for internet based data acquisition and control

IE31 Smart telephone design a concept to integrator to integrate the services of telephone voice and web browser

IE32 Web server based energy measurement & controlling unit

IE33 Implementation of wireless based attendance register

IE34 Web server based intelligent temperature monitoring and alert system

IE35 Power plant monitor and control system

IE36 Automatic chemical drip level controller for biomedical applications

IE37 Embedded based motor speed control using PWM method

IE38 Embedded based V/F method induction motor speed control

IE39 Air pollution, velocity monitor in environmentIE40 Embedded based automatic jogging ,breaking, plugging for motors

IE41 Embedded based automatic phase changer in industries

IE42 Embedded based centralized wireless monitoring in textile industries

IE43 Multipoint temperature controller using PC and microcontroller

IE44 Bi-directional DC motor speed controller

IE45 Security system for boiler temperature management system

IE46 Weather monitoring system

IE47 Multi channel motor speed monitoring/control

IE48 Embedded networking using RS232 port

IE49 Industrial automation and security system using RS232 standard

IE50 Thermal power station automation using embedded technology

IE51 Control and monitoring of production flow and power consumption

IE52 Microcontroller based first fault announcing using speech

IE53 Boiler management and control system

IE54 Multi channel emergency indicator

IE55 Lift control system with positioning monitoring

IE56 Pressure control system based on piezoelectric transducer

IE57 Sequential control system for conveyer system

IE58 Temperature controller through fiber cable

IE59 PC based protection- monitoring system for textile industry

IE60 PC based boiler control system

IE61 Intelligent security system for industries

IE62 Digital counter using proximity sensors

IE63 Multi channel heating system with different set points

IE64 Microcontroller based boiler management system

IE65 PC based programmable temperature controller for furnaces

IE66 Microcontroller based position control for stepper motor

IE67 Security system with auto dialer & remote monitor

IE68 Power room monitor with data logger

IE69 Programmable multi channel water level controller

IE70 Object detection using ultrasonic waves

IE71 Air leakage detection based on pressure sensor

IE72 Modular IR remote control for industrial automation

DSP application projects

CODE PROJECT TITLE YEAR

EML001 Design of Online Surface Inspection System of Hot Rolled Strips 2009

EML002 Coherent Multi-scale Image Processing using Dual tree Quaternion

Wavelets

2008

EML003 Minimum Variance Optimal Rate Allocation for Multiplexed H

264/AVC Bit streams

2008

EML004 Noise and Signal Estimation in Magnitude MRI Rician Distributed

Images: A LMMSE algorithm

2008

EML005 Analysis and Compensation of Rolling Shutter Effect 2008

EML006Texture Analysis and Classification with Linear Regression Model

based Wavelet Transform

2008

EML007Dynamic De-noising of Tracking Sequences

2008

EML008Efficient Non-local mean for De-noising of Textural Patterns

2008

EML009Wavelet, Ridge lets, and curve lets for Poisson Noise Removal

2008

EML010Universal Impulse Noise Filter Based on Genetic Programming

2008

EML011Phase Shifting for Non-separable 2 D Hear Wavelets

2008

EML012 Reversible integer color transform 2007

EML013 A universal noise remove algorithm with an impulse detector 2007

EML014

Feature based wavelet shrinking algorithm for image denoising 2007

EML015

Image sharing using visual cryptography 2007

EML016

A fast method automated detection of blood vessel and lesions in retinal

images

2007

Power Electronics projects

Code Project Title Year

1. A Novel Robust Control Method for the Series–Parallel Resonant

Converter

2009

2. A Review of the State of the Art of Power Electronics for Wind Turbines 2009

3. A ZCS Current-Fed Full-Bridge PWM Converter With Self-Adaptable

Soft-Switching Snubber Energy

2009

4. Balanced Driving System for Multiple Cold-Cathode Fluorescent Lamps 2009

5. Pulse width Modulations for the Comprehensive Capacitor Voltage

Balance of n-Level Two-Leg Diode-Clamped Converters

2009

6. PWM Resonant Single-Switch Isolated Converter 2009

7. Improved Z-Source Inverter With Reduced Z-Source Capacitor Voltage

Stress and Soft-Start Capability

2009

8. A New Analog Controller for Three-Phase Four-Wire Voltage Generation

Inverters

2009

9. Design of a 5-kW, 1-U, 10-kW/dm3 Resonant DC–DC Converter for

Telecom Applications

2009

10. Digital Carrier Modulation and Sampling Issues of Matrix Converters 2009

11. Magnetic Resonant Coupling As a Potential Means for Wireless Power

Transfer to Multiple Small Receivers

2009

12. New Techniques for Measuring Impedance Characteristics of Three-Phase

AC Power Systems

2009

13. Operational Analysis and Modulation Control of Three-Level Z-Source 2009

Inverters With Enhanced Output Waveform Quality

14. Selective Harmonic Elimination PWM Control Scheme on a Three-Phase

Four-Leg Voltage Source Inverter

2009

15. Three-Level AC–DC–AC Z-Source Converter Using Reduced Passive

Component Count

2009

16. Topological Design and Modulation Strategy for Buck–Boost Three-Level

Inverters

2009

17. A Modular Fuel Cell, Modular DC–DC Converter Concept for High

Performance and Enhanced Reliability

2009

18. Capacitor Ripple Current in an Interleaved PFC Converter 2009

19. Design and Implementation of a Robust Current

Controller for VSI Connected to the Grid Through an LCL Filter

2009

20. Optimal Geometric Control of Power Buffers 2009

21. A Multipulse-Structure-Based Bidirectional PWM Converter for High-

Power Applications

2009

22. A Novel Three-Phase Three-Leg AC/AC Converter Using Nine IGBTs 2009

23. Bidirectional Switch Commutation for a Matrix Converter Supplying a

Series Resonant Load

2009

24. Digital Combination of Buck and Boost Converters to Control a Positive

Buck–Boost Converter and Improve the Output Transients

2009

25. Single-Phase Multilevel PWM Inverter Topologies Using Coupled

Inductors

2009

26. A Generalized Theory of Boundary Control for a Single-Phase Multilevel

Inverter Using Second-Order Switching Surface

2009

27. A Reduced-Part, Triple-Voltage DC–DC Converter for EV/HEV

Power Management

2009

28. A Soft-Switching Scheme for an Isolated DC/DC Converter With

Pulsating DC Output for a Three-Phase High-Frequency-Link PWM

Converter

2009

29. Characteristics and Design of an Asymmetrical Duty-Cycle-Controlled

LCL-T Resonant Converter

2009

30. Comprehensive Relationship Between Carrier-Based PWM and Space

Vector PWM in a Five-Phase VSI

2009

31. Three-Level ZVS Active Clamping PWM for the DC–DC Buck Converter 2009

32. Three-Port Series-Resonant DC–DC Converter

to Interface Renewable Energy Sources With Bidirectional Load and

Energy Storage Ports

2009

33. A Input-Series- and Output-Parallel-Connected Inverter System for High-

Input-Voltage Applications

2009

34. A Physically Based Fluorescent Lamp Model for a SPICE or a Simulink

Environment

2009

35. DC-link Voltage Control of a Full Power Converter for Wind Generator

Operating in Weak-Grid Systems

2009

36. Diode-Assisted Buck–Boost Voltage-Source Inverters 2009

37. Evaluation of Three-Phase Transformerless Photovoltaic Inverter

Topologies

2009

38. Passivity-Based Control for an Interleaved Current-Fed Full-Bridge

Converter With a Wide Operating Range Using the Brayton–Moser Form

2009

39. Zero-Voltage-Switching Control for a PWM Buck Converter Under

DCM/CCM Boundary

2009

40. FPGA-Based Digital Pulsewidth Modulator With Time Resolution Under

2 ns

2008

41. Maximum Boost Control of the Z-Source Inverter 2008

42. A Cascade Multilevel Converter Topology With Reduced Number of

Switches

2008

43. A Family of Isolated Interleaved Boost and Buck Converters With

Winding-Cross-Coupled Inductors

2008

44. LED Driver With Self-Adaptive Drive Voltage 2008

45. Loop Gain Measurement of Paralleled DC–DC Converters With Average-

Current-Sharing Control

2008

46. Optimal Winding Arrangements of a Bearingless Switched Reluctance 2008

Motor

47. An Improved Topology of SEPIC Converter With Reduced Output

Voltage Ripple

2008

48. Topological and Modulation Design of Three-Level Z-Source Inverters 2008

49. Design and Development of Z- Source Inverter for photo voltaic

applications

2008

50. Design and Development of Matrix converter. 2008

51. Design and Development of Luo converter for photo voltaic applications 2008

52. Simulation and Development of high frequency dc-dc converter

automobile lighting applications

2008

53. Simulation and Development of Cuk converter for dc drive applications 2008

54. Simulation and Development of high frequency Inverter for Solar cell

supplied street lighting applications

2008

55. Simulation and Development of three phase four wire four leg inverter for

inverter for UPS application

2008

56. Modeling and analysis of Double fed induction generator for wind turbine

applications

2008

57. Simulation and Development of power converters for hybrid power system

applications

2008

58. Simulation and implementation of seven level cascaded multi level inverter 2008

59. Simulation and implementation of seven level diode clamped multi level

inverter

2008

60. Simulation and implementation of seven level Hybrid multi level inverter 2008