2010 - CMI Environment Hungary Kft. · 2010. 2 BAMO: European company since 1978 Testing All...
-
Upload
hoangquynh -
Category
Documents
-
view
214 -
download
0
Transcript of 2010 - CMI Environment Hungary Kft. · 2010. 2 BAMO: European company since 1978 Testing All...
European company for industrial instrumentation
Phone: +33 (0) 130 258 320 – http://www.bamo.eu
pHChlorine
ConductivityTurbidity
LevelFlow
Plastic devices
2010
2
BAMO: European company since 1978
Testing
All electrical and electronic devices are subjected to strict,individual testing.Adherence to documented inspection procedures results in a flawlessfunctioning of all subassemblies and components during production,as well as after final assembly. Additional tests prior to shipmentprovides you, with assurance that our products meet the highestquality requirements
Reliability is our forceCalibration and operation testing
BSM 500 - Testing electricaland mechanical operation
Manufacturing and assembly
All of the necessary technologies are available in thefactory.This guarantees us the flexibility we need to producecustom devices in the shortest time. Well trainedemployees, as well as documented procedures and workdirectives which have been implemented within theframework of the DIN EN ISO 9001:2000 standard,assure that the quality you expect is continuouslymaintained and documented.
We guarantee it.TIG welding for stainless steel Ultrasonic welding
Electronics R&D
R&D
Product development is conducted in accordance withDIN EN ISO 9001:2000 procedures, as well as allapplicable legal requirements and European standards.Testing in our own EMC lab, as well as by externalapproval authorities (i.e. TÜV, DIBt etc.), fulfills theprerequisites for application of the CE mark, as well asWHG and ATEX requirements.
For Your Safety.
Contact us if you have any question! Custom productsfor special requirements are part of our know-how.
We are with the listening of your needs.Development and Test laboratory
Delivery
Are you in a rush?Quick shipments are a service we managedaily. All standard units and components whichare not OEM are almost always available forimmediate shipment.Let us know your required shipping date.
We'lI find the solution.Standard shipping procedures, multiple inspections and determination of exact weight complete ourtotal quality procedures.
Contact
A modern system assures that our lines are always available for you. Prompt order processing, quotations and technical studies; exact control of orders means that the shortest possible lead-times can be reached.
3
BAMO: European company since 1978
Visit our Website http://www.bamo.eu
Our warehouse
Ready for dispatching
One of our machine tools
BAMO MESURES SAS was founded in 1978 by its current president: Mr Yannick Moinet. Activities of the company are the development, manufacturing and distribution of instruments for the measurement and monitoring of liquids.
Its structure is now very strong with a capital of 400 000 €, large buildings, highly qualified staff and a very good reputation on the market.
Since the beginning, the company has undergone a rapid development focused on industrial pH and conductivity meters.In the years 1990, the firm expanded rapidly through new developments in level measurement. Through the purchase of various companies specialized in the control of fluids, BAMO offers a range of skills in research, development andmanufacture of level sensors.The companies acquired most recently are:CIEMA, well known in France for RedOx probes (Bougies REDOX) IER Mess und Regeltechnik in Germany, known for MAXIMAT overfill and leakage sensors.
The head office is located in the Paris area, 15 km to the north of PARIS, 20 km from Roissy Charles de Gaulle Airport, close to the motorwayA15 (Paris – Cergy-Pontoise). With its leading edge machine tools, its control systems and its large storage facilities, the company offices and factory cover around 2000square meters in Argenteuil and 1500 square meters in Mannheim.
The company has a very highly qualified staff and therefore is able to offer the best possible service to its customers.
Our employees have the right experience and technical expertise to meet your requirements in the challenge of the 21st Century. Becausemost of our range is in stock, we can reduce delivery times and many of our products are available immediate despatch.
Updated permanently, our website is a genuine working tool at your disposal.
We employ 48 people, 5 of them are involved in development, 17 in production and 26 in sales department, logistic, administration and management.
BamoPHOX
Test us; we shall be proud if you are satisfied!
Tel.: +33 (0) 130 258 320E-mail: [email protected]
4
9300Immersion probe holderDesigned for pH, ORP and conductivityelectrodes, plus temperature probeVarious fittings are available for immersionat the point of measurement
OPTION: Self cleaning system
pH Conductivity Chlorine
Industrial electrodespH or ORP measurementCombined electrodesUniversal S7-head,Connection: 13.5 Pg thread
BamoPHOX 106pH/mV-monitor
Measurement of pH or ORP (RedOx) in industrialprocess.2 lines display, alphanumerical for simulta-neous indication of the measured value plusthe temperatureRange: 0…14 pH and ±1000 mV programmable Automatic or manual temperature compensationOutput signal (2): 0/4 - 20 mA (parameter and T°)
Relay output: 4 alarm contacts
FACTORY OPTIONS: - Data-logger and RS 422 interface- Integrated web server communication
Conductivity probesConductivity measuring of liquidsin containers or open drainsCell constant: 0.01...10
OPTION: integrated Pt 100 probeDifferent materials
9240In-line electrode holderfor pH and ORPelectrodesPVC materialVarious processconnectionsavailable
BamoCHLORChlorine monitoringComplete packages of controlling,water monitoring, dosing and disinfectantsystems in the water and waste watertreatment field. Wide range of amperometric sensorssuch as chlorine, chlorine dioxide,ozone, hydrogen peroxideand peracetic acid.
Complete assembly
5
In-line turbidity monitorUsing absorption and 90° scattered light technology in accordance with ISO 7027Measuring range: 0.01 - 2000 FNU / FAUOutput signal: 4-20 mA
Suitable with turbidity measurement of:
l Drinking water plants
l Raw and waste water
l Flavor concentration
l Diatomaceous earth dosing
l Flocculent dosing
l Phase separation, filtration
Immediate connection to BamoPHOX monitor,data logger and regulator
Turbidity
TRUBOMAT® GS3Turbidity controllerNo effect of day light Output relay
- Control on phase separation milk/water - Drinking water quality survey - Diaphragm filtration efficiency- Survey on separation, centrifugation
TRUBOMAT® GA In line turbidity sensorMaterials: Stainless steel 1.4301PVC, PP
BamoPHOX turbidity monitoring
CP1Immersion probefor turbidity controlFor open channel flumesand sludge level monitoring
To be used with a TRUBOMAT® GS3
TURBISENSTurbidity transmitter,Immersion ProbeCompact transmitter 4-20 mAMeasurement according to ISO 70276 selectable ranges in FNU, (0...2000)High resolution from 0.01 FNU
Integrated 4 digits display for: - Actual value - Programming - Settings
Integrated colour/dirt compensation(switchable)
Power supply: 10...30 V DCOutput signal: 4-20 mA
MudLine® TGS Portable sludge blanket level monitorBattery poweredMud level detection in primaryand secondary clarifier, thickenerand other applications.Useful also in rotten black sludgeSludge level monitoringin small sewage plants
Immersion depth: 10 m as a maximum
6
Safety systems
LISALeakage, inundation and humidity detectionLISA system or “Liquid Intrusion Safe Alarming”, is designed for alarming as soon as humidity or a drop of water is detected on a ribbon alike.The fail safe alarming system LISA includes, as a minimum, one ribbon alike or one-point detector, plus one alarm relay ES5000.
LISA system is dedicated for leakage detection on water distribution (pipes, sprinklers) and alarming in case of water, condensates or humidityin areas where water is prejudicial for equipments:
l Computers, electronic devices, machinery
l High electric power station
l Computer rooms, medical equipments
l HVAC moisture prevention - Museum - Stores, etc...
MAXITOPCompact overfill sensorUniversal use for electrically conductive,non-flammable water endangering liquids
MAXITOP LW-CLeakage detection sensor
MAXIMAT® TC4Signalling deviceIndicator controller 1 to 4 unit monitoring
According WHG § 19 in Germany,the serie is called MAXIMAT® C.
According WHG § 19 in Germany,the serie is called MAXIMAT® LW-C.
No moving parts
Process connection2" G, PVC, sliding -
Stem PEHD, Ø 40 mm
Adjustableimmersion depth -
Stem: PEHD, Ø 40 mm
With fastening angle andadjustable thread joint
or
With cap and adjustablethread joint
7
Safety systems
NIVOIL®
Alarm system for oil-water separatorDesigned for the monitoring of hydrocarbon fluids separators, theconverter NivOil® may be connected to 1, 2, or 3 sensors. The 3 sensors may be connected to any input.
Hydrocarbon fluid layer thickness sensor to detect when themaximum thickness is reached.
Overfill sensor to detect when the fluids are on the highest level
Sludge layer sensor to alarm when maintenance is necessary.
- ATEX certification- Main power supply 230 V AC / 50 Hz, or 10...27 V DC- 3 inputs, for any NIVOIL probes - Automatic recognition of type probe - 3 relay outputs - Audible alarm disable by DIP switch - Front system drawing with lightning alarms- Wall mounting cabinet, IP 65 - Suspended cable probes with 10 m long cable
BAMOBOX SOLAR (BBS)Autonomous system for oil-water separatorA complete system BBS will power an alarm unit NivOil® 10...27 V DCwhen no main power supply exists in the field.
- Autonomous complete system - Field installation - Solar panel powered and battery - Pole clamp fitting or wall mounting- Battery protection against discharge and overload - Solar panel own fitting support
OPTIONS:- Flashing light (Short distance survey)- GSM (Large distance survey)
Oil-water separator
Overfilling sensorOil layer thickness sensor
Sludge layer sensor
8
Level detectors
MNR 6, MNR 7.., MNR 7/EXMagnetic float level controllers1 to 6 changeover contactsLength up to 3000 mm,PVC, PP, PVDF, Stainless steel,Certification for category 1 (Zone 0)
ES 2001Level control relay For electrically conductive liquids
- On/Off level controller using 2 rods - Level regulation using 3 rods - Pump automation, protection - Alarm signals
NIVOSTOP®
Switch level floats Large rangeFor waste water and sewage pumping systems, sumps shafts etc...With built-in ballastWith different cablesWith different shapes
TVI - HE - STE - STSProbes for resistive level controlEven for aggressive liquids.1 to 5 electrodes,PVC, PP, PVDF or Stainless steel, PTFE coatingMaxima: 220 °C / 200 barConnections to relay ES 2001
BSM 501 - BSM 515Level switchesMounting on Stainless steel, PVC and PP tubesFixing: Stainless steel or plastic collar for pipes,For diameter: 32 or 63 mm.1 changeover contact: 500 VA ...
With built-in ballast
9
Sommaire
MEMPRO®
Hydrostatic level transmitterUniversal use in open tanksReliable operation, even with aggressive, highly viscous,contaminated and crystallising liquidsThe measuring cell is not in contact with the medium. Range from 200 mm up to 10 m WCWetted parts: PVC, PP or stainless steelMeasuring cell: CeramicOutput signal: 4-20 mA
Switching point: MEMPRO S6 with 4 adjustable relays
BAMOBULLevel measurementAir bubble principleWall mounting housing IP 55, with pressure sensorAir generator with flow rate regulator for level measurementin open channel flumesConvenient for charged or foaming effluentsMeasuring range: 0 to 500 mm WCOutput signal: 4-20 mA
Level transmitters
RTMContinuous level transmitterSignal output: 4-20 mAStep: 10 mmThe RTM is adaptedto our level indicatorsMAGTOP, SFA, MNR 6 and MNR 7.
MEMPRO® Ex CEEx ia IIC T6 ZONE 0High-grade steel execution
NIVAPRESSHydrostatic level transmitterConvenient for measuring clear liquids, stored in tanks and wells. It is recommended for monitoring and controlof submersible pumps systems.
Sensor and probe: Stainless steel 316 L Diaphragm: Hastelloy C276 Cable: PUR (polyurethane) Output signal: 4 to 20 mA, (2 wire technique),or 0 to 10 V (3 wire technique)Scale range available from 1 to 500 m WCVersion ATEX available: ATEX Ex II 1G EEx ia IIC T4 / T5 / T6
10
GNR5 / KNRLocal indicator,level controlGlass or transparent PVC tubeMagnet float: PPFlange or BSP threadedconnection
Level indicators
FS4Local indicator,Tank top fitting For liquids,with or without particlesMaterials: PVC or PP
MAGTOP LineIndirect readingHigh mechanical resistance and totally safeFor dangerous products: hot water, alkalis or acids, etc...Materials: Stainless steel, PVC, PP, PVDFConnection: Flange or BSP threaded connectionOutput signal: 4-20 mA and/or level switches
MAGTOP withContinuous level transmitter,
Output signal: 4-20 mA
11
Accessories:A complete set for your level indicatorsFloats, magnet counterweights, pulleys and graduated rulersFit the SFA, GNR 5 series and MAGTOP systems
Counterweightswith magnet
Pulley
SFA seriesCable operated level indicator- Standard model- Gas tight cable operated level indicator- Reduced path model
OPTIONAL ACCESSORIES:- Bi-stable level switches: BSM 501 or BRK 60- Continuous level transmitter: 4-20 mA output- Graduated rulers: %, Height, Volume
JARStainless steel Cat & Mouse Level indicator with metallic parts Wide scale Graduated in %, m3, L Long height possible Protected pulleys with a no jump system Sections of 1500 mm, adjustable total length
Level indicators
BamoPHOX 759 Flow calculatorProgrammable for level,instantaneous flow,daily volume, permanentcumulated volumeAlso within memorizedcurves for VENTURI,V or U overflow weirInput signal: 0/4-20 mA Output signal: 0/4-20 mA 4 adjustable limit relaysWall mounting housing IP 65
FACTORY OPTIONS:- Data-logger and RS 422 interface- Integrated Web Server
communication device
12
Flow
DEBITBACOverflow weirStandard: ISO 1438/1-1980Measuring range: 1 m3/h to 400 m3/hV-angle from 20° to 90°Materials: PVC or PE
DEBITFLO Venturi channel
Flow-rate measurement in open channel flumesStandard: ISO 4359
Long-lasting composite materialAvailable in a range of 10 sizes, from 7 m3/h to 2500 m3/h
With or without approach channel
V-notch Weir plates & VENTURIFlow-rate measurementin open channel flumesPVC or PEHD material
FACTORY OPTION: - integration in plastic
housing for a simpleand mobile installation
BAMOBULLevel measurementAir bubble principleFor level measurement in open channel flumes Direct link with BamoPHOX 759Wall mounting housing IP 55 with pressure sensorAir generator with flow-rate regulator Convenient for charged effluentsMeasuring range: 0 to 500 mm WCAccuracy: ±1%Output signal: 4 to 20 mA
VENTURI chanelwith or without approach chanel.
Ultrasonictransmitter
BIF 6040Flow-rate and counterFor flow meters with pulse outputInput: NPN, PNP, TTL-contactMain power: 95 to 265 V AC2 or 4 alarm relaysOutput signal: 4-20 mASensor power supply: 24 V DC
13
Flow
DEBIXFlow-rate measuring probeDifferential pressure on liquids, gases and steamVery low pressure loss Permanent accuracy: ±1%Excellent repeatability: 0.1% Range: 0 to 400 bar within 0 - 400°CConstruction: Stainless steel 316 LND 50 to ND 2000 mm
BAMOMATICElectromagnetic flow meterl The most competitive on the market
l Calibrated individually on the test benchto a precision better than ±5 pulses /1000
l Convenient for small flow rates between 0.1 and 150 l/min
No pressure lossOnly for conductive liquids (minimum 20 μS/cm) No influence of density, neither of viscosity, temperature or pressure Wetted parts: electrodes, stainless steel 316 L – process, POM or PVDF
BAMOFLUMagnet paddlewheel flow meterLow pressure lossConstruction: PP, PVDF or stainless steelFit pipes from ND 15 to ND 600Flow speed from 0.8 to 6 m/sSupply voltage: 24 V DC
DBPlastic orifice plateflow meter For large diametersLocal direct flow indicator ND 50 ... ND 200Wetted parts: PVC and EPDMMeasuring range: 2 to 350 m3/hMaximal pressure: 10 bar at 20°C
OPTION:- Flowless alarm with a reed contact
For DEBIX and DBbefore quotation, please confirm: - fluid and concentration, specific weight, - process pressure and temperature, - maximum flow expected, - pipe diameter, thickness and material.
Flow direction: vertically up or down, horizontally to the rightor to the left and the best position for reading by the end-user.
14
SP 800Jet pumpTo pump, to mixt and to create vacuumContruction: PVC - PPH - PVDFND 10 to ND 80Driving fluid: 100 to 20 000 l/h (water)Vacuumed fluid: 0 to 14 000 l/h (water) 0 to 23 000 Nl/h (gas)
Plastic valves and devices
TS11 - TS13Pt 100 Ω sensorsMaterial: PVC, PP, PVDFT° range: -20...+140 °CSignal output: 4-20 mAor 3 wires
IDP - PDPVariable areaflow indicatorsFor aggressive or neutral fluidsCorrosion and shockproofConstruction: All in plastic materials- PVC - Trogamid (PA) - Polysulfon (PSU) - PVDFFor air - HCl - NaOH - ... Direct reading plus 2 set point indicators Alarm contacts in option Accuracy: Class 4 Radial mounting: Vertical, ascending flow
IDP model: 0-50 m3/h water in 14 scalesPDP model: 3 to 1500 l/h water in 9 scales
EV 1602/2 Way Plastic Solenoid ValveMaterial housing: PVC, PPH, PTFESealings: EPDM, FPMKv: 0,3 to 750 l/mnDirect operation, or with pressure lineassistanceNO or NC functionPower supply: 230 V AC / 50 Hz, 24 V DC
DBPlastic orifice plate flow meter For large diametersLocal direct flow indicator ND 50 ... ND 200Wetted parts: PVC and EPDMMeasuring range: 2 to 350 m3/hMaximal pressure: 10 bar at 20°C
OPTION:- Flowless alarm with a reed contact
15
Plastic valves and devices
SPM 903Gauge guards, all in plastic To replace costly, heavy and rusty metallic gauge guards
Materials:- PVC- PP- PVDFDiaphragm: PTFE
l To protect pressure sensors or gauges
l To prevent contamination
SDDPressure relief valvesComplete process system protectionAgainst continuous over pressure ND 10 to ND 50 mm Union end or flange connectionAdjustable from 0.2 to 10 bar Materials:- PVC- PP- PVDFDiaphragm: PTFE
RDPPressure reducing valvesComplete process system protection Continuous regulated downstream pressure ND 10 to ND 50 mm Union end or flange connectionAdjustable pressure from 0.2 to 10 bar Materials:- PVC- PP- PVDFDiaphragm: PTFE
Our Germany factory since 41 years in Mannheim
Our facilities
It has 1500 m2 of floor spacewhich enables us to be well organised
and satisfy our customers.
n Technical centre
n Delivery centre
n Training centre
n Manufacturing centre
BAMO MESURES SASFactory & offices
22, Rue de la Voie des Bans - Z.I. de la Gare - 95100 ARGENTEUIL - FRANCEPhone: +33 (0) 130 258 320 - http://www.bamo.euFax: +33 (0) 134 101 605 - E-mail: [email protected]
Registered capital: 400 000 € - APE 2651B - SIREN 314 055 864 - FR 08 314 055 864
Our manufacturein France since 32 years
N°1 of the pH-meterand conductivity-meter
Since the beginning, the companyhas undergone a rapid development
focused on industrial pHand conductivity-meters.