Transcript of 2010 Buick Lucerne Brochure Rochester
T:18”T
:11.125”
B:18.25”B
:11.375”
2010 BUICK LUCERNE
51240_MM_2010 Lucerne-E.indd 1 8/24/09 1:11:40 PM
Bob Hastings Buick-GMC, Inc.800 Panorama TrailRochester, NY 14625(585) 586-6940www.bobhastings.com
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”
T:11.125”
B:18.25”
B:11.375”
WHAT YOU DRIVE IS THE PRODUCT OF WHO YOU ARE.
51240_MM_2010 Lucerne-E.indd 2 8/24/09 1:12:04 PM
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”T
:11.125”
B:18.25”B
:11.375”
You don’t define your identity based on the type of vehicle you drive. Instead, you select a vehicle based on how accurately
it expresses your character – and embodies your journey. Lucerne is the intelligent luxury sedan that projects the quiet
confidence of its owner – with restrained yet assured styling, an array of advanced technology and sophisticated
performance. The elegance of its exterior lines is complemented by the cabin’s exceptional level of craftsmanship
and quiet. The full story is only revealed when you get behind the wheel and feel the robust power, enhanced driver
control and refined road manners. The automobile you were always meant to drive: THE 2010 BUICK LUCERNE.
For more information about Lucerne, visit buick.gm.ca
51240_MM_2010 Lucerne-E.indd 3 8/24/09 1:12:18 PM
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”
T:11.125”
B:18.25”
B:11.375”
EXTERIOR
04 EXTERIOR
51240_MM_2010 Lucerne-E.indd 4 8/24/09 1:12:26 PM
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”T
:11.125”
B:18.25”B
:11.375”
INTEGRATED DESIGN MEETS INTEGRATED TECHNOLOGY. Your first impression of Lucerne is created by its
exterior design – how its fluid lines flow together seamlessly. They demonstrate how all the distinct design elements
– from Buick’s signature waterfall grille and portholes to its road-hugging stance – carry a unified style. Every line
is resolved – every detail is given meticulous attention. The same can be said for Lucerne’s technology. Systems
like the standard full-function traction control, four-wheel ABS and available StabiliTrak® electronic stability control
react in tandem to enhance driver control. Design and technology are integrated flawlessly in Lucerne.
Lucerne CXL, shown in Quicksilver Metallic with available equipment.
51240_MM_2010 Lucerne-E.indd 5 8/24/09 1:12:34 PM
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”
T:11.125”
B:18.25”
B:11.375”
SUPER
V8 POWER MEETS MAGNETIC HANDLING. Take Lucerne’s graceful form and then add another
dimension with inspiring performance. The quintessential Lucerne – Super. Equipped with the
renowned 292 horsepower 32-valve High Output 4.6L Northstar V8 engine that responds with
conviction, whether you are accelerating from a standing start or executing a crisp passing
manoeuvre. The assured handling heightens your feeling of command, with a Magnetic Ride
Control® suspension that reads the road 1000 times a second and automatically adjusts
shock absorber damping accordingly. And the feel is more precise, thanks to
the Magnasteer® speed-sensitive, variable-assist power steering system.
Power and control in perfect harmony – Lucerne Super.
06 SUPER
51240_MM_2010 Lucerne-E.indd 6 8/24/09 1:12:46 PM
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”T
:11.125”
B:18.25”B
:11.375”
Lucerne Super, shown in Quicksilver Metallic with available equipment.
51240_MM_2010 Lucerne-E.indd 7 8/24/09 1:12:54 PM
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”
T:11.125”
B:18.25”
B:11.375”
INTERIOR
08 INTERIOR
EXQUISITE DESIGN MATCHED BY EXQUISITE CRAFTSMANSHIP. Lucerne’s cabin is
defined by spaciousness, quiet, the quality of materials and meticulous craftsmanship.
The quiet is the product of Buick’s exclusive QuietTuning™ technologies and tactics
that reduce, block and absorb noise. The exclusive feeling this hushed environment
51240_MM_2010 Lucerne-E.indd 8 8/24/09 1:13:10 PM
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”T
:11.125”
B:18.25”B
:11.375”
Lucerne Super, shown with perforated leather-appointed seating in Ebony with available equipment.
creates is then further enhanced with premium materials such as the perforated leather-
appointed seating surfaces and suede inserts that are standard with Super and available
on CXL. The seats feature French seams, demonstrating an impeccable attention to detail.
It is a cabin designed and appointed to create an exquisite level of comfort and luxury.
51240_MM_2010 Lucerne-E.indd 9 8/24/09 1:13:21 PM
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”T
:11.125”
B:18.25”B
:11.375”
THE GENIUS IS IN THE DETAILS. Every aspect of your driving experience
in Lucerne has been anticipated and provided for. That begins with
such fundamental elements as the cabin’s temperature control. Heated
front seats and steering wheel, as well as automatic dual-zone climate
controls are included in CXL and Super. And to help you find your
optimal seating position, all models include front seats featuring power
adjusters. Music then takes centre stage – particularly if you opt for
the premium harman/kardon® nine-speaker amplified audio system
that’s standard on Super and available on CXL. You can also connect
to 130 channels of programming with XM Satellite Radio™,* which is
standard on CXL and Super and available on CX. There’s no need to
focus on the details, because we already did.
*Available in 10 Canadian provinces and the 48 contiguous United States. Subscription sold separately after trial period.
AT LEFT. Walnut Burl accents set the tone on Super’s heated steering wheel.
TOP. The available leather-appointed seating features French stitching and
perforated suede inserts.
AT RIGHT ABOVE. The premium harman/kardon nine-speaker amplified 280-watt
audio system is standard in Super and available on CXL.
AT RIGHT BELOW. The available voice and touch-screen activated DVD-based
Navigation System covers more than 10 million kilometres of North American roads.
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”
T:11.125”
B:18.25”
B:11.375”
TECHNOLOGY
TECHNOLOGY WITH VERY PRACTICAL ADVANTAGES. Lucerne’s sophisticated array of
technology serves a number of different functions. Engine management features like Variable
Valve Timing (VVT) on the 227 horsepower 3.9L V6 engine help optimize both output and
fuel efficiency. Further enhancing your convenience is the remote vehicle starter system that’s
standard on Super and available on CX and CXL. The safety technology is also advanced,
DOES YOUR VEHICLE HAVE A HELP BUTTON? With OnStar,* you can get the help you need at the push of a button. If you’re in a collision, you don’t even need to ask for help – sensors around your vehicle can automatically alert an OnStar Advisor. If your vehicle is stolen, we can use GPS technology to help police find it. OnStar with 1 year of the Directions & Connections Plan is included on all Lucerne models. Also included with the Directions & Connections Plan is Turn-by-Turn Navigation.** It’s the simplest and smartest navigation system available. Just push the OnStar button and tell the Advisor where you want to go, then turn-by-turn directions are downloaded to your vehicle. No one offers more ways to help you on the road. Learn more at onstar.ca
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”T
:11.125”
B:18.25”B
:11.375”
with the comprehensive OnStar® system that is standard equipment. Helping you see the
unseen are the available Side Blind Zone Alert that informs you when a vehicle is entering
your blind spot – and the Lane Departure Warning system, which reads road markings when
you are driving above 56 km/h (35mph), sending visual and audible cues when you stray
from the lane. Sight and sound in very clear focus – in Lucerne.
Lucerne CXL, shown in Quicksilver Metallic with available equipment.
* OnStar services require vehicle electrical system (including battery), wireless service and GPS satellite signals to be available and operating for features to function properly. OnStar acts as a link to existing emergency service providers. Subscription service agreement required. Ability to locate stolen vehicles varies with conditions. Call 1.888.4ONSTAR (1.888.466.7827) or visit onstar.ca for OnStar’s Terms and Conditions, Privacy Statement, and details and system limitations.
**Turn-by-Turn Navigation not available in certain areas. Visit onstar.ca for coverage map.
51240_MM_2010 Lucerne-E.indd 13 8/27/09 10:56:42 AM
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”
T:11.125”
B:18.25”
B:11.375”
LUCERNE MODEL OVERVIEW
LUCERNE CXLucerne CX features include:
•227hp3.9LV6enginewith Variable Valve Timing (VVT) and FlexFuel capability
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”T
:11.125”
B:18.25”B
:11.375”
OTHER OWNERSHIP PRIVILEGES AND PROGRAMS:†
•GM Protection Plan (GMPP)–theonlyextendedserviceplanbackedbytheresourcesandcommitmentofGeneralMotors;GMPPmaybepurchasedatthetimeofyoursaleorsubsequentlyduringtheNewVehicleLimitedwarrantyperiod
INFORMATION RESOURCES:YoucanfindmoreinformationabouttheseprogramsfromyourGMdealer,orattheseinformationcentres:•TheGMwebsiteatgm.ca•TheGMCustomerCommunicationMarketingCentreat1-800-GM-DRIVE
A WORD ABOUT THIS BROCHURESomeoftheequipmentshownordescribedthroughoutthisbrochuremaybeavailableatextracost.Wehavetriedtomakethisbrochurecomprehensiveandfactual.Wereservetheright,however, tomakechangesatanytime,withoutnotice, in prices, colours, materials, equipment, specifications, models and availability. Specifications, dimensions,measurements,ratingsandothernumbersin thisbrochureandotherprintedmaterialsprovidedat thedealershiporaffixedtovehiclesareapproximatesbasedupondesignandengineeringdrawingsandprototypesandlaboratorytests.Yourvehiclemaydifferduetovariationsinmanufactureandequipment.Sincesomeinformationmayhavebeenadaptedsincethetimeofprinting,pleasecheckwithyourGMdealerforcompletedetails.GeneralMotorsofCanadaLimitedreservestherighttolengthenorshortenthemodelyearforanyproduct,foranyreason,ortostartandendmodelyearsatdifferenttimes.
A WORD ABOUT ASSEMBLYGM vehicles are equipped with engines and components produced and assembled by different operating units ofGeneralMotors, itssubsidiariesandsuppliersand theseenginesandcomponentsmaychangeorbeobtained fromdifferentsources fromtimeto time.Allsuchenginesandcomponentsareapprovedforuse inGMvehicles.Certainequipmentorderedmaybeunavailableatthetimeofassemblyandwesuggestthatyouverifythatyourvehicleincludestheequipmentyouordered,oriftherearechanges,thattheyareacceptabletoyou.
The same care that goes into the design, engineering and craftsmanship of every Buick is also applied to the ownership experience. It encompasses everything from long-lasting quality and dependability, to the high level of confidence you’ll gain from the knowledge that Lucerne is backed by the best coverage in Canada:•4-year/80,000kmNewVehicleLimitedWarranty**•5-year/160,000kmPowertrainComponentLimitedWarrantywith
$0 deductible on repairs and the warranty is fully transferable at no charge**
powertrain control modules (PCMs).****Whichevercomesfirst.Conditionsandlimitationsapply.Seedealerfordetails.
AN EVEN MORE EXCLUSIVE LUCERNE. The 2010 Buick Lucerne offers a style all its own, coupled with advanced functionality. You can take those characteristics one step further with the addition of available dealer-installed Buick Accessories. An advanced remote two-way start/monitoring system not only enables you to start your Lucerne from a distance, but also keeps track of tire pressure and fuel level. The dual head restraint DVD entertainment system features twin flat-screen monitors mounted in the back of each front-seat head restraint. For a finishing touch, 18-in. chrome wheels provide added style.
Why Buick Accessories? They are the only ones that were integrated into Lucerne’s comprehensive vehicle development process, ensuring excellent fit, finish and functionality. And they are the only accessories backed by Buick’s 4-year/80,000 km New Vehicle Limited Warranty.* Ask your sales consultant for a complete list of Buick Accessories for Lucerne, or visit gm.ca
*Whichever comes first, when permanently installed by the dealer at the time you purchased your new vehicle, or for the remainder of the New Vehicle Limited Warranty if installed after the time of your vehicle purchase, but no less than 12 months.
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
dual-depth with automatic air bag suppression Passenger Sensing System S S SAir bags – driver and front-passenger, seat-mounted side-impact S S SAir bags – front-to-rear, head curtain side-impact S S SBrake/transmission shift interlock S S SDoor locks – power, programmable with lock-out protection S S SDoor locks – rear, child-security S S SHeadlights – halogen, Daytime Running Lights with automatic light control
(includes Twilight Sentinel® with delay feature) S S SKeyless entry system – remote, programmable S S SLane Departure Warning and Side Blind Zone Alert1 – includes integrated
turn signals – O1 OOnStar In-Vehicle Communications and Assistance Service – includes 1 year
of the Directions & Connections Plan* and Turn-by-Turn Navigation** S S SSafety restraints – LATCH (Lower Anchors and top Tethers for Children),
rear seats S S SStabiliTrak – electronic stability control system O2 O2 STheft-deterrent system – audible/visible, content theft system O2 O2 STheft-deterrent system – electronic immobilizer S S STraction control – electronic, full-function, all-speed S S SUltrasonic rear parking assist – rear obstacle detection system with
audible warning O2 O2 S
EXTERIOR CX CXL SUPERFog lights – projector beam S S SGlass – Solar-Ray®, tinted S S SLights – front cornering S S SMirrors – manual folding, power remote control, heated with driver-side
auto-dimming feature S S SMouldings – bodyside, body-colour with chrome inserts and body-colour rockers S S SMouldings – lower deck lid, chrome – O3 SSunroof – power, sliding glass panel with express-open feature O4 O OTires – P235/55R17 all-season† S S –Tires – P245/50R18 all-season† – – SWheels – 17" x 7" aluminum, Bright Silver finish (A) S S –Wheels – 17" x 7" aluminum, chrome-plated finish (B) O O5 –Wheels – 17" x 7" aluminum, chrome-clad (C) – O3 –Wheels – 18" x 7.5" aluminum, Bright Silver finish (D) – – SWheels – 18" x 7.5" aluminum, chrome-plated finish (E) – – OWindshield wipers – flat-blade, 2-speed with variable delay (intermittent) S S SCXL Special Edition Package – includes chrome deck lid moulding, CXL
Special Edition badging, 17" chrome-clad aluminum wheels, custom perforated suede-appointed seating and premium embroidered floor mats – O6 –
Driver Confidence Package – includes StabiliTrak electronic stability control system, ultrasonic rear parking assist with audible warning system, audible/visible content theft alarm and remote vehicle starter system O O –
MECHANICAL
Battery – with run-down protection S S SBrakes – power, 4-wheel disc S S SBrakes – 4-wheel anti-lock braking system (ABS) S S SDrive – front-wheel S S SEngine – 3.9L V6 VVT with SFI, FlexFuel (E85 capable)
Horsepower – 227 @ 5700 rpm; Torque – 237 lb.-ft. @ 3200 rpm S S –Engine – Northstar 4.6L High Output V8 with SFI
Horsepower – 292 @ 6300 rpm; Torque – 288 lb.-ft. @ 4500 rpm – – SEngine – block heater O O OExhaust system – aluminized stainless steel S S SExhaust system – single with chrome tip S S – Exhaust system – dual with chrome tips – – SSteering – power, rack-and-pinion S S –Steering – power, Magnasteer magnetic variable-assist, rack-and-pinion – – SSuspension – 4-wheel independent, Ride & Handling S S –Suspension – 4-wheel independent, Super with Magnetic Ride Control – – SSuspension – automatic rear-level control S S STransmission – 4-speed automatic with overdrive S S SVehicle starter system – remote O2 O2 S
INTERIOR
Air conditioning – manual, single-zone with particulate filter S – –Air conditioning – automatic, dual-zone, with particulate filter, includes
exterior temperature display and rear-seat outlets O7 S SArmrest – rear-seat, centre with pass-through and dual cupholders S S SCargo convenience net O7 S SConsole – front floor with armrest, dual cupholders and storage S S SCruise control – electronic, steering-wheel-mounted with resume, coast and
decelerate/accelerate features S S SFloor mats – front and rear, carpeted S S –Floor mats – front and rear, embroidered carpet – – SInstrumentation – analogue cluster with Driver Information Centre
(includes speedometer, tachometer, coolant temperature and fuel gauge, GM Oil Life Monitoring System, low fuel and low windshield washer fluid level indicators)8 S S S
Instrumentation – tire pressure monitoring system S S SLighting – delayed entry/exit, theatre dimming, front courtesy, glovebox, front
map, rear courtesy reading and trunk S S SMirror – rear-view with auto-dimming feature S S –Mirror – rear-view with auto-dimming feature and compass – – SRetained accessory power S S SSteering column – tilt adjustable S S –Steering column – power tilt adjustable and telescopic – – SSteering wheel – leather-wrapped with cruise and sound system controls S – –Steering wheel – heated, leather-wrapped with cruise and sound system controls – S –Steering wheel – Walnut Burl wood finish, heated (includes wood shifter
on 5-passenger) – O SSunshades – LH and RH padded; sliding extendable, with illuminated
vanity mirrors S S STrunk – release, power remote S S SUniversal home remote – 3-channel transmitter O7 S SWindows – power, driver’s express-down feature S S SComfort & Convenience Package – includes automatic dual-zone climate
controls, Bluetooth mobile phone connectivity, cargo convenience net and universal home remote transmitter O – –
Memory Package – automatically recalls settings for 2 drivers based on their individual remote access key fob: the recall function remembers the position of the driver’s seat and exterior rear-view mirror preferences – S S
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”T
:11.125”
B:18.25”B
:11.375”
DIMENSIONS
SEATS CX CXL SUPERCloth front bucket seats with centre floor console S – –Heated leather-appointed front bucket seats with power 2-way lumbar
adjusters and centre floor console – S9 –Heated perforated suede-appointed front bucket seat inserts with power 4-way
lumbar adjusters and centre floor console – O3 SHeated and cooled perforated suede-appointed front bucket seat inserts with
power 4-way lumbar adjusters and centre floor console – O O40/20/40 divided cloth bench front seat (6-passenger) O – –40/20/40 divided leather-appointed heated front bench seat (6-passenger) – O10 –Power 6-way driver and front-passenger seat adjusters S – –Power 8-way driver and front-passenger seat adjusters – S S
SOUND SYSTEMS
All Lucerne sound systems include an electronically tuned AM/FM stereo with MP3 playback compatible, seek, scan, auto tone control, speed-compensated volume control, Radio Data System® (RDS), TheftLock®, auxiliary input jack and digital clock S S S
AM/FM stereo with CD player S – –AM/FM stereo with in-dash 6-disc CD changer – O SAM/FM stereo with single CD player, DVD-based touch-screen
navigation system†† – O11 OBluetooth – in-vehicle mobile phone connectivity system O7 S S6-speaker sound system S S –harman/kardon 9-speaker premium 280-watt sound system – O SXM Satellite Radio‡ O S S
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”
T:11.125”
B:18.25”
B:11.375”
tt
INTERIOR FABRIC COLOURS
EXTERIOR/INTERIOR COLOUR COMPATIBILITY
18 COLOURS & WHEELS
39B – Cashmere 194 – Ebony392/393 – Cashmere
CX Cloth Super & CXL Special Edition SuedeCXL Leather
83B – Titanium 404 – Shale402/403 – Shale
832/833 – Titanium
*Available at extra cost.1 – Not available on Super.2 – Not available on CXL Special Edition.
Ebony interior is accented with Ebony trim.Cashmere and Shale interiors are accented with Cocoa trim.Titanium interior is accented with Dark Titanium trim.
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
T:18”T
:11.125”
B:18.25”B
:11.375”
tt
EXTERIOR COLOURS
WHEELS
A – 17" Bright Silver finish aluminum wheel
B – 17" chrome-plated aluminum wheel
C – 17" chrome-clad aluminum wheel
E – 18" chrome-plated aluminum wheel
D – 18" Bright Silver finish aluminum wheel
The exterior colours in this brochure are as close to the actual vehicle production colours as the printing process allows. For more accurate colour samples, ask your sales consultant to see the dealer showroom vehicle colour display.
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
WE’LL TAKE YOU EXACTLY WHERE YOU WANT TO GO.
You demand more from a vehicle than ever before. Exactly the same can be said of Buick. For starters, you’re looking
for greener driving choices – Buick offers a range of vehicles that incorporate technology that helps reduce fuel
consumption, like Variable Valve Timing and Direct Injection, and reduce emissions with FlexFuel engines that can
run on E85 ethanol. Down the road, there are plug-in electric vehicles and other emerging technologies that point the
way to a future of zero-emissions driving.
At Buick, we take pride in more than the quality of our vehicles. We are also proud to be the Official Vehicle of the
Vancouver 2010 Olympic and Paralympic Winter Games. It is an honour and a privilege to be able to support the
2010 Winter Games and assist in the delivery of an extraordinary Olympic and Paralympic experience for Canada.
We invite you to share the passion.
For more information about Buick visit buick.gm.ca
Bob Hastings Buick-GMC, Inc.Corner of Rte. 441 and Panorama Trail in Penfield
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 3.0.81 Copyright 2005 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): USSheetfedCoated.icc RGB Image: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: AdobeRGB1998.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 5.0%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: no Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no