201-300
description
Transcript of 201-300
MediaWare No: 160 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 201 2-DEC-05 10:36:36 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
1603L(+)-Histidine’BAKER ANALYZED’ Biochemical
A NHCH:NCH:CCH2CH(NH2)COOH
M = 1 55. 16 g/mol
CAS NO. 7 1 -00- 1
EINECS 200-745-3
NC CODE 2933 29 90
Assay (dried basis) 98.5- 10 1 .5%
Arsenic (As) max. 0.0003%
Ash (sulfated) max. 0. 1%
Heavy Metals (as Pb) max. 0.002%
Iron (Fe) max. 0.003%
Loss on Drying at 105°C max. 0.2%
Specific Rotation [a] 25 (dried basis, c=1
in 6N HCl) +12.6° to +14.0°
PRODUCT PACKING CONT.
NO. BOX
1603.0025 25 g Glass
CL-Histidine MonohydrochlorideSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
CHomidium bromideSee Ethidium Bromide
CHPLC ColumnsSee for detailed information section Chromatography products, page 448
CHPLC Solvents and ReagentsSee for detailed information section HPLC Solvents and Reagents, page 64
7255Hyamine 16220.004 mol/l / ’BAKER ANALYZED’ / for determination of anionic tensides
CAS NO. 1 2 1 -54-0
EINECS 204-479-9
NC CODE 2923 90 00
Titer (mol/l) 0.0039-0.004 1 PRODUCT PACKING CONT.
NO. BOX
7255.1000 1 l 6
7255.2500 2.5 l
Volumetric Solution, ready for use.
8899HYDRA-POINT Buffer’BAKER ANALYZED’ / Buffer for stabilizing pH during Karl Fischer titration
1 l = 1 .0 kg
NC CODE 3822 00 00
UN/ID NO. 3286
ADR/RID 3 FTC
IMDG 3/I
R: 1 1 -23/24/25-34-39/23/24/25-63
S: 1 6-26-36/37/39-45-7/9
0F
highlyflammable
3T
toxic
Buffer capacity min. 5 mmol acid/ml PRODUCT PACKING CONT.
NO. BOX
8899.0500 500 ml 6
8899.1000 1 l 6
Contains: imidazole, sulfur dioxide, methanol.
8891HYDRA-POINT Composite 2’BAKER ANALYZED’ / Pyridine free one-component reagent for volumetric Karl Fischer titration
1 l = 1 . 1 kg
NC CODE 3822 00 00
UN/ID NO. 2922
ADR/RID 8 CT1
IMDG 8/III
R: 20-34-63
S: 26-36/37/39-45
1C
corrosive
To be used with HYDRA-POINT Methanol dryproduct no. 8898Titer (mg H2O/ml)1) min. 2.001) At time of lot release.
PRODUCT PACKING CONT.
NO. BOX
8891.1000 1 l 6
8891.2500 2.5 l 4
Contains: imidazole, iodine, sulfur dioxide.
HYDRA
201
MediaWare No: 161 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 202 2-DEC-05 10:36:36 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
8890HYDRA-POINT Composite 5’BAKER ANALYZED’ / Pyridine free one-component reagent for volumetric Karl Fischer titration
1 l = 1 .2 kg
NC CODE 3822 00 00
UN/ID NO. 2922
ADR/RID 8 CT1
IMDG 8/III
R: 20-34-63
S: 26-36/37/39-45
1C
corrosive
To be used with HYDRA-POINT Methanol dryproduct no. 8898Titer (mg H2O/ml)1) min. 5.001) At time of lot release.
PRODUCT PACKING CONT.
NO. BOX
8890.1000 1 l 6
8890.2500 2.5 l 4
Contains: imidazole, iodine, sulfur dioxide.
8892HYDRA-POINT Composite 5K’BAKER ANALYZED’ / Pyridine free one-component reagent for volumetric Karl Fischer titration of ketones
NC CODE 3822 00 00
UN/ID NO. 1 760
ADR/RID 8 C9
IMDG 8/III
R: 20-34-63
S: 26-36/37/39-45
1C
corrosive
To be used with HYDRA-POINT Methanol dryproduct no. 8898Titer (mg H2O/ml) min. 5.00
PRODUCT PACKING CONT.
NO. BOX
8892.1000 1 l 6
8892.2500 2.5 l 4
Contains: imidazole, iodine, sulfur dioxide.
8862HYDRA-POINT Coulometric An’BAKER ANALYZED’ / Anolyte for coulometric Karl Fischer determinations with diafragm.
1 l = 1 .20 kg
FLASHPOINT a2 1 °C
NC CODE 3822 00 00
UN/ID NO. 3286
ADR/RID 3 FTC
IMDG 3/II
R: 1 1 -23/24/25-34-39-40
S: 26-36/37/39-45
0F
highlyflammable
3T
toxic
Suitability for coulometric Karl Fischer
titration passes test
PRODUCT PACKING CONT.
NO. BOX
8862.0500 500 ml 6
Contains: methanol, imidazole, sulphur dioxide, iodine,
chloroform.
8863HYDRA-POINT Coulometric Cat’BAKER ANALYZED’ / Catholyte for coulometric Karl Fischer determinations with diafragm.
1 l = 0.98 kg
FLASHPOINT a2 1 °C
NC CODE 3822 00 00
UN/ID NO. 3286
ADR/RID 3 FTC
IMDG 3/II
R: 1 1 -23/24/25-34-39/23/24/25-40-
48/23-59-63
S: 26-36/37/39-45
oN
dangerousfor theenvironment
0F
highlyflammable
3T
toxic
Suitability for coulometric Karl Fischer
titration passes test
PRODUCT PACKING CONT.
NO. BOX
8863.0025 25 ml 6
Contains: methanol, imidazole, sulphur dioxide,
diethanolamine, tetrachloromethane.
HYDRA
202
MediaWare No: 162 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 203 2-DEC-05 10:36:37 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
8860HYDRA-POINT Coulometric Gen’BAKER ANALYZED’ / Halogen free reagent for coulometric Karl Fischer determinations without diafragm.
1 l = 0.98 kg
FLASHPOINT a2 1 °C
NC CODE 3822 00 00
UN/ID NO. 3286
ADR/RID 3 FTC
IMDG 3/II
R: 1 1 -23/24/25-34-39/23/24/25-63
S: 26-36/37/39-45
0F
highlyflammable
3T
toxic
Suitability for coulometric Karl Fischer
titration passes test
PRODUCT PACKING CONT.
NO. BOX
8860.0500 500 ml 6
Contains: methanol, 1 -hexanol, imidazole, sulphur
dioxide, iodide.
8861HYDRA-POINT Coulometric Oven’BAKER ANALYZED’ / Halogen free reagent for coulometric Karl Fischer determinations without diafragm.
1 l = 1 .04 kg
FLASHPOINT a2 1 °C
NC CODE 3822 00 00
UN/ID NO. 3286
ADR/RID 3 FTC
IMDG 3/II
R: 1 1 -23/24/25-34-39/23/24/25-63
S: 26-36/37/39-45
0F
highlyflammable
3T
toxic
Suitability for coulometric Karl Fischer
titration passes test
PRODUCT PACKING CONT.
NO. BOX
8861.0500 500 ml 6
Contains: methanol, imidazole, sulphur dioxide, iodine,
propylene glycol.
8898HYDRA-POINT Methanol Dry’BAKER ANALYZED’ / Dry methanol is a working medium for Karl Fischer titration
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 3822 00 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
To be used with HYDRA-POINT Composite 2product no. 8891 or HYDRA-POINT Composite 5product no. 8890Water (H2O) max. 0.0 1%
PRODUCT PACKING CONT.
NO. BOX
8898.1000 1 l 6
8898.2500 2.5 l 4
8855HYDRA-POINT Solvent G’BAKER ANALYZED’ / Pyridine free solvent for volumetric Karl Fischer titration
1 l = 0.93 kg
FLASHPOINT 1 1 °C
NC CODE 3822 00 00
UN/ID NO. 1 992
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-36/38-39/23/24/25-
63
S: 1 6-26-36/37/39-45-7/9
0F
highlyflammable
3T
toxic
To be used with HYDRA-POINT Titrant 2 productno. 8845 or HYDRA-POINT Titrant 5 product no.8844Suitability for Karl Fischer titration passes test
PRODUCT PACKING CONT.
NO. BOX
8855.1000 1 l 6
8855.2500 2.5 l 4
Contains: imidazole, sulfur dioxide, methanol.
HYDRA
203
MediaWare No: 163 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 204 2-DEC-05 10:36:37 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
8845HYDRA-POINT Titrant 2 mg H2O/ml’BAKER ANALYZED’ / Titrant for volumetric Karl Fischer titration
FLASHPOINT 1 1 °C
UN/ID NO. 1 992
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7/9
0F
highlyflammable
3T
toxic
To be used with HYDRA-POINT Solvent K productno. 8840 or HYDRA-POINT Solvent G product no.8855Titer (mg H2O/ml)1) min. 2.001) At time of lot release.
PRODUCT PACKING CONT.
NO. BOX
8845.1000 1 l 6
8845.2500 2.5 l 4
Contains: methanol, iodine.
8844HYDRA-POINT Titrant 5 mg H2O/ml’BAKER ANALYZED’ / Titrant for volumetric Karl Fischer titration
FLASHPOINT 1 1 °C
NC CODE 3822 00 00
UN/ID NO. 1 992
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7/9
0F
highlyflammable
3T
toxic
To be used with HYDRA-POINT Solvent K productno. 8840 or HYDRA-POINT Solvent G product no.8855Titer (mg H2O/ml)1) min. 5.001) At time of lot release.
PRODUCT PACKING CONT.
NO. BOX
8844.1000 1 l 6
8844.2500 2.5 l 4
Contains: methanol, iodine.
6010Hydrobromic Acid47-49% / ’BAKER ANALYZED’ / ACS
A HBr
M = 80.92 g/mol
1 l = 1 .49 kg
CAS NO. 1 0035- 10-6
EINECS 233- 1 13-0
NC CODE 28 1 1 1 9 10
EC NO. 35 002 0 1 8
UN/ID NO. 1 788
ADR/RID 8 C1
IMDG 8/II
R: 34-37
S: 26-45-7/9
1C
corrosive
Exceeds ACS SpecificationsAssay 47.0-49.0%
Chloride (Cl) max. 0.05%
Iodide (I) max. 0.003%
Phosphate (PO4) max. 0.00 1%
Residue after Ignition max. 0.002%
Sulfate and Sulfite (as SO4) max. 0.003%
Trace Impurities (in ppm):
Arsenic (As) max. 0.5
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 1
Selenium (Se) max. 0.0 1
PRODUCT PACKING CONT.
NO. BOX
6010.1000 1 l
6010.9200 200 l
HYDRA
204
MediaWare No: 164 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 205 2-DEC-05 10:36:38 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
6081Hydrochloric Acid37-38% (max. 5 ppb Hg) / ’BAKER ANALYZED’
A HCl
M = 36.46 g/mol
1 l = 1 . 1 9 kg
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
EC NO. 1 7 002 0 1 0
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/II
R: 34-37
S: 26-45
1C
corrosive
Assay 37-38%
Ammonium (NH4) max. 3 ppm
Free Chlorine max. 0.5 ppm
Mercury (Hg) max. 5 ppb
Residue after Ignition max. 5 ppm
Sulfate (SO4) max. 1 ppm
Sulfite (SO3) max. 2 ppm
Trace Impurities (in ppm):
Aluminium (Al) max. 0.05
Arsenic (As) max. 0.05
Barium (Ba) max. 0.02
Beryllium (Be) max. 0.0 1
Cadmium (Cd) max. 0.02
Calcium (Ca) max. 0. 1
Chromium (Cr) max. 0.05
Cobalt (Co) max. 0.0 1
Copper (Cu) max. 0.0 1
Germanium (Ge) max. 0. 1
Iron (Fe) max. 0.05
Lead (Pb) max. 0.05
Lithium (Li) max. 0.0 1
Magnesium (Mg) max. 0.05
Manganese (Mn) max. 0.0 1
Molybdenum (Mo) max. 0.02
Nickel (Ni) max. 0.05
Potassium (K) max. 0.05
Silver (Ag) max. 0.0 1
Sodium (Na) max. 0.05
Strontium (Sr) max. 0.0 1
Thallium (Tl) max. 0.05
Titanium (Ti) max. 0.05
Vanadium (V) max. 0.0 1
Zinc (Zn) max. 0.5
Zirconium (Zr) max. 0.05
PRODUCT PACKING CONT.
NO. BOX
6081.1000 1 l 6
6081.2500 2.5 l 4
6081.2500PE 2.5 l HDPE 4
6081.9025 25 l
6081.9200 200 l
Hydro
205
MediaWare No: 165 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 206 2-DEC-05 10:36:38 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
6011Hydrochloric Acid37% / ’BAKER ANALYZED’ / ACS
A HCl
M = 36.46 g/mol
1 l = 1 . 1 9 kg
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
EC NO. 1 7 002 0 1 0
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/II
R: 34-37
S: 26-45
1C
corrosive
Meets ACS Specifications. Meets ReagentSpecifications for testing USP/NF monographsAssay 36.5-38.0%
Appearance passes test
Bromide (Br) max. 0.005%
Color (APHA) max. 10
Extractable Organic Substances max. 5 ppm
Free Chlorine max. 1 ppm
Residue after Ignition max. 3 ppm
Specific Gravity at 60°/60°F 1 . 1 85- 1 . 1 92
Trace Impurities (in ppb):
Aluminium (Al) max. 100
Arsenic and Antimony (as As) max. 5
Boron (B) max. 50
Calcium (Ca) max. 200
Chromium (Cr) max. 100
Copper (Cu) max. 100
Gold (Au) max. 100
Heavy Metals (as Pb) max. 100
Iron (Fe) max. 100
Lead (Pb) max. 50
Magnesium (Mg) max. 300
Manganese (Mn) max. 300
Mercury (Hg) max. 5
Nickel (Ni) max. 100
Potassium (K) max. 300
Sodium (Na) max. 300
Tin (Sn) max. 300
Titanium (Ti) max. 300
Zinc (Zn) max. 100
Trace Impurities (in ppm):
Ammonium (NH4) max. 3
Phosphate (as PO4) max. 1
Sulfate (SO4) max. 0.5
Sulfite (SO3) max. 0.8
PRODUCT PACKING CONT.
NO. BOX
6011.0500 500 ml 6
AHydrochloric Acid 37% MOS, VLSI GradeSee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
Hydro
206
MediaWare No: 166 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 207 2-DEC-05 10:36:38 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
9530Hydrochloric Acid36.5-38% / ’BAKER INSTRA-ANALYZED’ / for Trace Metal Analysis / ACS
A HCl
M = 36.46 g/mol
1 l = 1 . 1 9 kg
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
EC NO. 1 7 002 0 1 0
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/II
R: 34-37
S: 26-45
1C
corrosive
Meets ACS SpecificationsAssay (by acid-base titration) 36.5-38.0%
Appearance passes test
Bromide (Br) max. 0.005%
Color (APHA) max. 10
Extractable Organic Substances max. 5 ppm
Free Chlorine max. 0.5 ppm
Residue after Ignition max. 3 ppm
Specific Gravity at 60°/60°F 1 . 1 85- 1 . 1 92
Trace Impurities (in ppb):
Aluminium (Al) max. 10
Arsenic and Antimony (as As) max. 5
Barium (Ba) max. 1
Beryllium (Be) max. 1
Bismuth (Bi) max. 10
Boron (B) max. 20
Cadmium (Cd) max. 1
Calcium (Ca) max. 50
Chromium (Cr) max. 1
Cobalt (Co) max. 1
Copper (Cu) max. 1
Gallium (Ga) max. 1
Germanium (Ge) max. 3
Gold (Au) max. 4
Heavy Metals (as Pb) max. 100
Iron (Fe) max. 15
Lead (Pb) max. 1
Lithium (Li) max. 1
Magnesium (Mg) max. 10
Manganese (Mn) max. 1
Mercury (Hg) max. 0.5
Molybdenum (Mo) max. 10
Nickel (Ni) max. 4
Niobium (Nb) max. 1
Potassium (K) max. 9
Selenium (Se) act. value reported
Silicon (Si) max. 100
Silver (Ag) max. 1
Sodium (Na) max. 100
Strontium (Sr) max. 1
Tantalum (Ta) max. 1
Thallium (Tl) max. 5
Tin (Sn) max. 5
Titanium (Ti) max. 1
Vanadium (V) max. 1
Zinc (Zn) max. 5
Zirconium (Zr) max. 1
Trace Impurities (in ppm):
Ammonium (NH4) max. 3
Phosphate (PO4) max. 0.05
Sulfate (SO4) max. 0.5
Sulfite (SO3) max. 0.8
PRODUCT PACKING CONT.
NO. BOX
9530.0500 500 ml 6
9530.2500 2.5 l 4
6012Hydrochloric Acid35-39% / ’BAKER’
A HCl
M = 36.46 g/mol
1 l = 1 . 1 9 kg
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
EC NO. 1 7 002 0 1 0
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/II
R: 34-37
S: 26-45
1C
corrosive
Assay 35.0-39.0%
Appearance of solution passes test
Free Chlorine max. 4 ppm
Heavy Metals (as Pb) max. 2 ppm
Identification passes test
Residue after Evaporation max. 0.0 1%
Sulfates (as SO4) max. 20 ppm
PRODUCT PACKING CONT.
NO. BOX
6012.1000 1 l
6012.2500 2.5 l 4
6012.5000 5 l 4
6012.9025 25 l
Hydro
207
MediaWare No: 167 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 208 2-DEC-05 10:36:39 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
6900Hydrochloric Acid33-36% / ULTREX II Ultrapure Reagent
A HCl
M = 36.46 g/mol
1 l = 1 . 1 9 kg
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
EC NO. 1 7 002 0 1 0
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/II
R: 34-37
S: 26-45
1C
corrosive
Certificate Provided Reporting Actual Lot AnalysisAssay 33-36% (w/w)
Trace Impurities (in ppt) (pg/g):
Aluminium (Al) max. 20
Antimony (Sb) max. 20
Arsenic (As) max. 50
Barium (Ba) max. 10
Beryllium (Be) max. 10
Bismuth (Bi) max. 10
Boron (B) max. 100
Cadmium (Cd) max. 10
Calcium (Ca) max. 20
Cerium (Ce) max. 10
Cesium (Cs) max. 10
Chromium (Cr) max. 20
Cobalt (Co) max. 10
Copper (Cu) max. 20
Dysprosium (Dy) max. 1
Erbium (Er) max. 1
Europium (Eu) max. 1
Gadolinium (Gd) max. 1
Gallium (Ga) max. 10
Gold (Au) max. 100
Hafnium (Hf) max. 10
Holmium (Ho) max. 1
Indium (In) max. 1
Iron (Fe) max. 20
Lanthanum (La) max. 1
Lead (Pb) max. 10
Lithium (Li) max. 10
Lutetium (Lu) max. 10
Magnesium (Mg) max. 10
Manganese (Mn) max. 10
Mercury (Hg) max. 100
Molybdenum (Mo) max. 10
Neodymium (Nd) max. 1
Nickel (Ni) max. 50
Niobium (Nb) max. 1
Palladium (Pd) act. value reported
Platinum (Pt) act. value reported
Potassium (K) max. 10
Praseodymium (Pr) max. 1
Rhenium (Re) max. 10
Rhodium (Rh) max. 10
Rubidium (Rb) max. 10
Ruthenium (Ru) max. 10
Samarium (Sm) max. 1
Scandium (Sc) max. 10
Selenium (Se) act. value reported
Silver (Ag) max. 10
Sodium (Na) max. 10
Strontium (Sr) max. 10
Tantalum (Ta) act. value reported
Tellurium (Te) max. 1
Terbium (Tb) max. 1
Thallium (Tl) max. 10
Thorium (Th) max. 1
Thulium (Tm) max. 1
Tin (Sn) max. 20
Titanium (Ti) max. 20
Tungsten (W) max. 10
Uranium (U) max. 1
Vanadium (V) max. 10
Ytterbium (Yb) max. 1
Yttrium (Y) max. 1
Zinc (Zn) max. 20
Zirconium (Zr) max. 10
PRODUCT PACKING CONT.
NO. BOX
6900.0500 500 ml Fluoropolymer, pre-leached
6900.1000 1 l Fluoropolymer, pre-leached
6900.2000 2 l Fluoropolymer, pre-leached
Hydro
208
MediaWare No: 168 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 209 2-DEC-05 10:36:39 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
6070Hydrochloric Acid32% / ’BAKER ANALYZED’
A HCl
M = 36.46 g/mol
1 l = 1 . 1 6 kg
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
EC NO. 1 7 002 0 1 0
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/II
R: 34-37
S: 26-45
1C
corrosive
Assay min. 32%
Ammonium (NH4) max. 1 ppm
Free Chlorine max. 0.5 ppm
Residue after Ignition max. 5 ppm
Sulfate (SO4) max. 1 ppm
Sulfite (SO3) max. 2 ppm
Trace Impurities (in ppm):
Aluminium (Al) max. 0.5
Arsenic (As) max. 0. 1
Barium (Ba) max. 0. 1
Beryllium (Be) max. 0. 1
Cadmium (Cd) max. 0. 1
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0. 1
Cobalt (Co) max. 0. 1
Copper (Cu) max. 0. 1
Germanium (Ge) max. 0. 1
Iron (Fe) max. 0.5
Lead (Pb) max. 0. 1
Lithium (Li) max. 0. 1
Magnesium (Mg) max. 0.5
Manganese (Mn) max. 0. 1
Molybdenum (Mo) max. 0. 1
Nickel (Ni) max. 0. 1
Potassium (K) max. 0. 1
Silver (Ag) max. 0. 1
Sodium (Na) max. 0.5
Strontium (Sr) max. 0. 1
Thallium (Tl) max. 0. 1
Titanium (Ti) max. 0. 1
Vanadium (V) max. 0. 1
Zinc (Zn) max. 0.5
Zirconium (Zr) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
6070.1000 1 l
6070.2500 2.5 l 4
6070.9025 25 l
6070.9200 200 l
Hydro
209
MediaWare No: 169 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 210 2-DEC-05 10:36:39 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
9600Hydrochloric Acid30% / ’BAKER INSTRA-ANALYZED’ / for Trace Metal Analysis
A HCl
M = 36.46 g/mol
1 l = 1 . 1 9 kg
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
EC NO. 1 7 002 0 1 0
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/II
R: 34-37
S: 26-45
1C
corrosive
Actual lot analysis at time of lot releaseAssay 29-3 1%
Color max. 10 Hazen
Trace Impurities:
Aluminium (Al) max. 1 ppb
Ammonium (NH4) max. 0.5 ppm
Antimony (Sb) max. 1 ppb
Arsenic (As) max. 1 ppb
Barium (Ba) max. 1 ppb
Beryllium (Be) max. 1 ppb
Bismuth (Bi) max. 1 ppb
Boron (B) max. 1 ppb
Bromide (Br) max. 10 ppm
Cadmium (Cd) max. 1 ppb
Calcium (Ca) max. 1 ppb
Chromium (Cr) max. 1 ppb
Cobalt (Co) max. 1 ppb
Copper (Cu) max. 1 ppb
Free Chlorine max. 0.5 ppm
Gallium (Ga) max. 1 ppb
Germanium (Ge) max. 1 ppb
Gold (Au) max. 1 ppb
Indium (In) max. 1 ppb
Iron (Fe) max. 1 ppb
Lead (Pb) max. 1 ppb
Lithium (Li) max. 1 ppb
Magnesium (Mg) max. 1 ppb
Manganese (Mn) max. 1 ppb
Mercury (Hg) max. 1 ppb
Molybdenum (Mo) max. 1 ppb
Nickel (Ni) max. 1 ppb
Potassium (K) max. 1 ppb
Selenium (Se) max. 1 ppb
Silver (Ag) max. 1 ppb
Sodium (Na) max. 1 ppb
Strontium (Sr) max. 1 ppb
Thallium (Tl) max. 1 ppb
Thorium (Th) max. 1 ppb
Tin (Sn) max. 1 ppb
Titanium (Ti) max. 1 ppb
Total Phosphorus max. 0.0 1 ppm
Total Sulfur max. 0.3 ppm
Uranium (U) max. 1 ppb
Vanadium (V) max. 1 ppb
Zinc (Zn) max. 1 ppb
Zirconium (Zr) max. 1 ppb
PRODUCT PACKING CONT.
NO. BOX
9600.1000PE 1 l HDPE 6
HDPE bottle with dosing cap.
Hydro
210
MediaWare No: 170 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 211 2-DEC-05 10:36:40 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
6167Hydrochloric Acid25% / ’BAKER ANALYZED’
A HCl
M = 36.46 g/mol
1 l = 1 . 1 2 kg
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
EC NO. 1 7 002 0 1 0
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/II
R: 34-37
S: 26-45
1C
corrosive
Assay min. 25%
Ammonium (NH4) max. 3 ppm
Free Chlorine max. 0.5 ppm
Residue after Ignition max. 5 ppm
Sulfate (SO4) max. 1 ppm
Sulfite (SO3) max. 2 ppm
Trace Impurities (in ppm):
Aluminium (Al) max. 0.5
Arsenic (As) max. 0. 1
Barium (Ba) max. 0. 1
Beryllium (Be) max. 0. 1
Cadmium (Cd) max. 0. 1
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0. 1
Cobalt (Co) max. 0. 1
Copper (Cu) max. 0. 1
Germanium (Ge) max. 0. 1
Iron (Fe) max. 0.5
Lead (Pb) max. 0. 1
Lithium (Li) max. 0. 1
Magnesium (Mg) max. 0.5
Manganese (Mn) max. 0. 1
Molybdenum (Mo) max. 0. 1
Nickel (Ni) max. 0. 1
Potassium (K) max. 0. 1
Silver (Ag) max. 0. 1
Sodium (Na) max. 0.5
Strontium (Sr) max. 0. 1
Thallium (Tl) max. 0. 1
Titanium (Ti) max. 0. 1
Vanadium (V) max. 0. 1
Zinc (Zn) max. 0.5
Zirconium (Zr) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
6167.2500 2.5 l
6167.9025 25 l
CHydrochloric Acid 18.5% VLSISee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
7655Hydrochloric Acid18% / ’BAKER’
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/II
R: 36/37/38
S: 26-45
4Xi
irritant
Assay 18- 19% PRODUCT PACKING CONT.
NO. BOX
7655.1000PE 1 l HDPE 6
Hydro
21 1
MediaWare No: 171 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 212 2-DEC-05 10:36:40 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
7219Hydrochloric Acid10% / ’BAKER’
A HCl
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
EC NO. 1 7 002 0 1 0
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/III
R: 36/37/38
S: 26-45
4Xi
irritant
Assay 9.5 - 10.5%
Appearance passes test
Free Chlorine max. 1 ppm
Heavy Metals (as Pb) max. 2 ppm
Identification passes test
Residue after Evaporation max. 0.0 1%
Sulfates (as SO4) max. 5 ppm
PRODUCT PACKING CONT.
NO. BOX
7219.9010 10 l Polycube
7219.9060 60 l
7212Hydrochloric Acid3.57 mol/l, 1/0.28 mol/l / ’BAKER ANALYZED’
A HCl
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/II
R: 36/37/38
S: 26-45
4Xi
irritant
Titer (mol/l) 3.55-3.59 PRODUCT PACKING CONT.
NO. BOX
7212.9010 10 l Polycube
Volumetric Solution, ready for use.
7230Hydrochloric Acid2 mol/l / ’BAKER ANALYZED’
A HCl
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
Titer (mol/l) 1 .99-2.0 1 PRODUCT PACKING CONT.
NO. BOX
7230.1000 1 l 6
Volumetric Solution, ready for use.
7088Hydrochloric Acid1 mol/l / ’BAKER ANALYZED’
A HCl
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
Titer (mol/l) 0.997- 1 .003
Trace Impurities (in ppm):
Ammonium (NH4) max. 3
Heavy Metals (as Pb) max. 0.5
Iron (Fe) max. 0. 1
Sulfate (SO4) max. 1
PRODUCT PACKING CONT.
NO. BOX
7088.1000 1 l 6
7088.9010 10 l Polycube
7088.9020 20 l Polycube
Volumetric Solution, ready for use.
Each lot of this product is standardized potentiometrically
against NIST tracable reference standard.
7111Hydrochloric Acid0.5 mol/l / ’BAKER ANALYZED’
A HCl
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
Titer (mol/l) 0.4975-0.5025
Trace Impurities (in ppm):
Ammonium (NH4) max. 3
Heavy Metals (as Pb) max. 0.5
Iron (Fe) max. 0. 1
Sulfate (SO4) max. 1
PRODUCT PACKING CONT.
NO. BOX
7111.1000 1 l 6
7111.9010 10 l Polycube
7111.9020 20 l Polycube
Volumetric Solution, ready for use.
Each lot of this product is standardized potentiometrically
against NIST tracable reference standard.
Hydro
212
MediaWare No: 172 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 213 2-DEC-05 10:36:40 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
7477Hydrochloric Acid0.357 mol/l, 13.021 g HCl/l, 1/2.8 N / ’BAKER ANALYZED’
A HCl
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
Titer (mol/l) 0.355-0.359 PRODUCT PACKING CONT.
NO. BOX
7477.9010 10 l Polycube
Volumetric Solution, ready for use.
7651Hydrochloric Acid0.2 mol/l / ’BAKER ANALYZED’
A HCl
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
Titer (mol/l) 0. 1 990-0.20 10 PRODUCT PACKING CONT.
NO. BOX
7651.9010 10 l
Volumetric Solution, ready for use.
7038Hydrochloric Acid0.1 mol/l / ’BAKER ANALYZED’
A HCl
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
Titer (mol/l) 0.0997-0. 1003
Trace Impurities (in ppm):
Ammonium (NH4) max. 3
Heavy Metals (as Pb) max. 0.5
Iron (Fe) max. 0. 1
Sulfate (SO4) max. 1
PRODUCT PACKING CONT.
NO. BOX
7038.1000 1 l 6
7038.2500 2.5 l 4
7038.9010 10 l Polycube
7038.9020P 20 l Polycube
Volumetric Solution, ready for use.
7211Hydrochloric Acid0.0357 mol/l, 1/28 mol/l / ’BAKER ANALYZED’
A HCl
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
Titer (mol/l) 0.0350 - 0.0370 PRODUCT PACKING CONT.
NO. BOX
7211.9010 10 l Polycube
7211.9020 20 l Polycube
Volumetric Solution, ready for use.
7493Hydrochloric Acid0.01 mol/l / ’BAKER ANALYZED’
A HCl
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
Titer (mol/l) 0.0095-0.0 105 PRODUCT PACKING CONT.
NO. BOX
7493.9020 20 l Polycube
Volumetric Solution, ready for use.
Each lot of this product is standardized potentiometrically
against NIST tracable reference standard.
4657Hydrochloric Acid1 mol/l / 1 equiv. = 36.46g; 1N / DILUT-IT
A HCl
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/III
R: 36/37/38
S: 26-45
4Xi
irritant
PRODUCT PACKING CONT.
NO. BOX
4657 1 amp. 6
Volumetric Concentrate, for dilution to 1 l.
Hydro
213
MediaWare No: 173 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 214 2-DEC-05 10:36:41 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
4654Hydrochloric Acid0.5 mol/l / 1/2 equiv. = 18.23g; 0.5 N / DILUT-IT
A HCl
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/II
R: 36/37/38
S: 26-45
4Xi
irritant
PRODUCT PACKING CONT.
NO. BOX
4654 1 amp. 6
Volumetric Concentrate, for dilution to 1 l.
4655Hydrochloric Acid0.1 mol/l / DILUT-IT
A HCl
M = 36.46 g/mol
CAS NO. 7647-0 1 -0
EINECS 23 1 -595-7
NC CODE 2806 10 00
UN/ID NO. 1 789
ADR/RID 8 C1
IMDG 8/III
PRODUCT PACKING CONT.
NO. BOX
4655 1 amp. 6
Volumetric Concentrate, for dilution to 1 l.
4867Hydrochloric Acid0.01 mol/l / DILUT-IT
A HCl
M = 36.46 g/mol
EINECS 23 1 -595-7
NC CODE 2806 10 00
PRODUCT PACKING CONT.
NO. BOX
4867 1 amp. 6
Volumetric Concentrate, for dilution to 1 l.
AHydrochloric AcidSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
AHydrochloric Acid SolutionsSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
AHydrocortisone, MicronizedSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
Hydro
214
MediaWare No: 174 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 215 2-DEC-05 10:36:41 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
6904Hydrofluoric Acid49% / ULTREX II Ultrapure Reagent
A HF
M = 20.0 1 g/mol
1 l = 1 . 1 6 kg
CAS NO. 7664-39-3
EINECS 23 1 -634-8
NC CODE 28 1 1 1 1 00
EC NO. 9 003 00 1
UN/ID NO. 1 790
ADR/RID 8 CT1
IMDG 8/II
R: 26/27/28-35
S: 26-36/37-45-7/9
1C
corrosive3
T+
very toxic
Certificate Provided Reporting Actual Lot AnalysisAssay 47-5 1% (w/w)
Trace Impurities (in ppt) (pg/g):
Aluminium (Al) max. 20
Antimony (Sb) max. 20
Arsenic (As) max. 50
Barium (Ba) max. 10
Beryllium (Be) max. 10
Bismuth (Bi) max. 10
Boron (B) max. 100
Cadmium (Cd) max. 10
Calcium (Ca) max. 20
Cerium (Ce) max. 10
Cesium (Cs) max. 10
Chromium (Cr) max. 20
Cobalt (Co) max. 10
Copper (Cu) max. 20
Dysprosium (Dy) max. 1
Erbium (Er) max. 1
Europium (Eu) max. 1
Gadolinium (Gd) max. 1
Gallium (Ga) max. 10
Germanium (Ge) max. 10
Gold (Au) max. 20
Hafnium (Hf) max. 10
Holmium (Ho) max. 1
Indium (In) max. 1
Iron (Fe) max. 20
Lanthanum (La) max. 10
Lead (Pb) max. 10
Lithium (Li) max. 10
Lutetium (Lu) max. 1
Magnesium (Mg) max. 10
Manganese (Mn) max. 10
Mercury (Hg) max. 100
Molybdenum (Mo) max. 10
Neodymium (Nd) max. 1
Nickel (Ni) max. 50
Niobium (Nb) max. 10
Palladium (Pd) max. 20
Platinum (Pt) max. 20
Potassium (K) max. 10
Praseodymium (Pr) max. 1
Rhenium (Re) max. 10
Rhodium (Rh) max. 20
Rubidium (Rb) max. 20
Ruthenium (Ru) max. 20
Samarium (Sm) max. 1
Scandium (Sc) max. 10
Selenium (Se) act. value reported
Silver (Ag) max. 10
Sodium (Na) max. 10
Strontium (Sr) max. 10
Tantalum (Ta) act. value reported
Tellurium (Te) max. 1
Terbium (Tb) max. 1
Thallium (Tl) max. 10
Thorium (Th) max. 1
Thulium (Tm) max. 1
Tin (Sn) max. 20
Titanium (Ti) max. 50
Tungsten (W) max. 20
Uranium (U) max. 1
Vanadium (V) max. 10
Ytterbium (Yb) max. 1
Yttrium (Y) max. 1
Zinc (Zn) max. 20
Zirconium (Zr) max. 10
PRODUCT PACKING CONT.
NO. BOX
6904.0500 500 ml Fluoropolymer, pre-leached
6904.1000 1 l Fluoropolymer, pre-leached
Hydro
215
MediaWare No: 175 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 216 2-DEC-05 10:36:42 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
9563Hydrofluoric Acid48-51% / ’BAKER INSTRA-ANALYZED’ / for Trace Metal Analysis / ACS
A HF
M = 20.0 1 g/mol
1 l = 1 . 1 6 kg
CAS NO. 7664-39-3
EINECS 23 1 -634-8
NC CODE 28 1 1 1 1 00
EC NO. 9 003 00 1
UN/ID NO. 1 790
ADR/RID 8 CT1
IMDG 8/II
R: 26/27/28-35
S: 26-36/37-45-7/9
1C
corrosive3
T+
very toxic
Meets ACS Specifications. Meets ReagentSpecifications for testing USP/NF monographsAssay (acidimetric) 48.0-5 1 .0%
Color (APHA) max. 10
Fluorsilicic Acid (H2SiF6) max. 0.0 10%
Residue after Ignition max. 5 ppm
Trace Impurities (in ppb):
Aluminium (Al) max. 50
Arsenic and Antimony (as As) max. 30
Barium (Ba) max. 50
Beryllium (Be) max. 20
Bismuth (Bi) max. 100
Boron (B) max. 50
Cadmium (Cd) max. 10
Calcium (Ca) max. 50
Chromium (Cr) max. 10
Cobalt (Co) max. 5
Copper (Cu) max. 5
Gallium (Ga) max. 20
Germanium (Ge) max. 50
Gold (Au) max. 10
Heavy Metals (as Pb) max. 100
Iron (Fe) max. 100
Lead (Pb) max. 20
Lithium (Li) max. 20
Magnesium (Mg) max. 50
Manganese (Mn) max. 50
Mercury (Hg) max. 10
Molybdenum (Mo) max. 50
Nickel (Ni) max. 10
Potassium (K) max. 100
Silver (Ag) max. 20
Sodium (Na) max. 200
Strontium (Sr) max. 20
Tantalum (Ta) max. 100
Tin (Sn) max. 50
Titanium (Ti) max. 50
Vanadium (V) max. 50
Zinc (Zn) max. 20
Zirconium (Zr) max. 20
Trace Impurities (in ppm):
Chloride (Cl) max. 5
Nitrate (NO3) max. 3
Phosphate (PO4) max. 1
Sulfate and Sulfite (as SO4) max. 5
PRODUCT PACKING CONT.
NO. BOX
9563.0500 500 ml
AHydrofluoric Acid 49% CMOS, Finyte, Finyte-1 GradeSee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
Hydro
216
MediaWare No: 176 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 217 2-DEC-05 10:36:42 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
6013Hydrofluoric Acid48% / ’BAKER ANALYZED’ / ACS
A HF
M = 20.0 1 g/mol
1 l = 1 . 1 6 kg
CAS NO. 7664-39-3
EINECS 23 1 -634-8
NC CODE 28 1 1 1 1 00
EC NO. 9 003 00 1
UN/ID NO. 1 790
ADR/RID 8 CT1
IMDG 8/II
R: 26/27/28-35
S: 26-36/37-45-7/9
1C
corrosive3
T+
very toxic
Exceeds ACS SpecificationsAssay min. 48.0-5 1 .0%
Chloride (Cl) max. 5 ppm
Fluorsilicic Acid (H2SiF6) max. 0.0 1%
Heavy Metals (as Pb) max. 0.5 ppm
Phosphate (PO4) max. 1 ppm
Residue after Ignition max. 5 ppm
Sulfate and Sulfite (as SO4) max. 5 ppm
Trace Impurities (in ppm):
Aluminium (Al) max. 0.05
Arsenic and Antimony (as As) max. 0.05
Barium (Ba) max 0. 1
Beryllium (Be) max 0.0 1
Cadmium (Cd) max 0.02
Calcium (Ca) max 0.5
Chromium (Cr) max 0. 1
Cobalt (Co) max 0.0 1
Copper (Cu) max 0.0 1
Iron (Fe) max 0. 1
Lead (Pb) max 0.05
Lithium (Li) max 0.02
Magnesium (Mg) max 0. 1
Manganese (Mn) max 0.0 1
Molybdenum (Mo) max 0.02
Nickel (Ni) max 0.05
Potassium (K) max 0. 1
Silver (Ag) max 0.02
Sodium (Na) max 0.5
Strontium (Sr) max 0.02
Thallium (Tl) max 0.05
Titanium (Ti) max 0. 1
Vanadium (V) max 0.0 1
Zinc (Zn) max. 0.05
Zirconium (Zr) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
6013.1000 1 l 6
CHydrofluoric Acid 40% VLSISee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
Hydro
217
MediaWare No: 177 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 218 2-DEC-05 10:36:42 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
6079Hydrofluoric Acid38% / ’BAKER ANALYZED’
A HF
M = 20.0 1 g/mol
1 l = 1 . 1 3 kg
CAS NO. 7664-39-3
EINECS 23 1 -634-8
NC CODE 28 1 1 1 1 00
EC NO. 9 003 00 1
UN/ID NO. 1 790
ADR/RID 8 CT1
IMDG 8/II
R: 26/27/28-35
S: 26-36/37-45-7/9
1C
corrosive3
T+
very toxic
Assay 38-40%
Chloride (Cl) max. 5 ppm
Fluorsilicic Acid (H2SiF6) max. 0.005%
Phosphate (PO4) max. 2 ppm
Residue after Ignition max. 5 ppm
Sulfate and Sulfite (as SO4) max. 5 ppm
Trace Impurities (in ppm):
Aluminium (Al) max. 0.05
Arsenic and Antimony (as As) max. 0.05
Barium (Ba) max. 0. 1
Beryllium (Be) max. 0.0 1
Cadmium (Cd) max. 0.02
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0. 1
Cobalt (Co) max. 0.0 1
Copper (Cu) max. 0.0 1
Iron (Fe) max. 0. 1
Lead (Pb) max. 0.05
Lithium (Li) max. 0.02
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.0 1
Molybdenum (Mo) max. 0.02
Nickel (Ni) max. 0.05
Potassium (K) max. 0. 1
Silver (Ag) max. 0.02
Sodium (Na) max. 0.5
Strontium (Sr) max. 0.02
Thallium (Tl) max. 0.05
Titanium (Ti) max. 0. 1
Vanadium (V) max. 0.0 1
Zinc (Zn) max. 0.05
Zirconium (Zr) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
6079.1000 1 l 6
6079.2500 2.5 l 4
AHydrofluoric Acid 25% VLSISee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
AHydrofluoric Acid 5% VLSISee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
7048Hydrogen Peroxide35% / ’BAKER’
A H2O2
M = 34.0 1 g/mol
1 l = 1 . 1 3 kg
CAS NO. 7722-84- 1
EINECS 23 1 -765-0
NC CODE 2847 00 00
EC NO. 8 003 00 9
UN/ID NO. 20 14
ADR/RID 5. 1 OC1
IMDG 5. 1 /II
R: 22-37/38-4 1
S: 26-36/37/39
4Xn
harmful
Assay1) min. 35%1) At time of lot release.
PRODUCT PACKING CONT.
NO. BOX
7048.1000 1 l 6
7048.2500PE 2.5 l HDPE 4
7048.9025 25 l
For safe handling of 25 l tin cans, see Self-closing tap.
Hydro
218
MediaWare No: 178 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 219 2-DEC-05 10:36:43 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
5155Hydrogen Peroxide30% / ULTREX II Ultrapure Reagent
A H2O2
M = 34.0 1 g/mol
1 l = 1 . 1 1 kg
CAS NO. 7722-84- 1
EINECS 23 1 -765-0
NC CODE 2847 00 00
EC NO. 8 003 00 9
UN/ID NO. 20 14
ADR/RID 5. 1 OC1
IMDG 5. 1 /II
R: 22-4 1
S: 26-36/39
4Xn
harmful
Meets ACS Ultratrace SpecificationsAssay 25.0-35.0%
Appearance passes test
Free acid (meq/g) max. 0.5
Trace Impurities (in ppm):
Ammonium (NH4) max. 5
Chloride (Cl) max. 1
Nitrate (NO3) max. 2
Phosphate (PO4) max. 2
Sulfate (SO4) max. 5
Trace Impurities (in ppt):
Aluminium (Al) max. 100
Antimony (Sb) max. 1000
Arsenic (As) max. 1000
Barium (Ba) max. 50
Beryllium (Be) max. 1000
Bismuth (Bi) max. 1000
Boron (B) max. 1000
Cadmium (Cd) max. 50
Calcium (Ca) max. 100
Chromium (Cr) max. 50
Cobalt (Co) max. 50
Copper (Cu) max. 50
Gallium (Ga) max. 1000
Iron (Fe) max. 100
Lead (Pb) max. 100
Lithium (Li) max. 50
Magnesium (Mg) max. 50
Manganese (Mn) max. 50
Mercury (Hg) max. 1000
Molybdenum (Mo) max. 1000
Nickel (Ni) max. 50
Potassium (K) max. 100
Silicon (Si) max. 10000
Silver (Ag) max. 50
Sodium (Na) max. 100
Strontium (Sr) max. 50
Tin (Sn) max. 50
Titanium (Ti) max. 1000
Vanadium (V) max. 1000
Zinc (Zn) max. 50
Zirconium (Zr) max. 1000
PRODUCT PACKING CONT.
NO. BOX
5155.0450 450 ml PE
Hydro
219
MediaWare No: 179 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 220 2-DEC-05 10:36:43 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
7047Hydrogen Peroxide30% / ’BAKER ANALYZED’ / ACS
A H2O2
M = 34.0 1 g/mol
1 l = 1 . 1 1 kg
CAS NO. 7722-84- 1
EINECS 23 1 -765-0
NC CODE 2847 00 00
EC NO. 8 003 00 9
UN/ID NO. 20 14
ADR/RID 5. 1 OC1
IMDG 5. 1 /II
R: 22-4 1
S: 26-36/39
4Xn
harmful
Exceeds ACS SpecificationsAssay1) 30.0-32.0%
Ammonium (NH4) max. 5 ppm
Chloride (Cl) max. 1 ppm
Color (APHA) max. 10
Heavy Metals (as Pb) max. 1 ppm
Nitrate (NO3) max. 2 ppm
Phosphate (PO4) max. 2 ppm
Residue after Evaporation max. 0.002%
Sulfate (SO4) max. 2 ppm
Titrable Acid (meq/g) max. 0.0006
Trace Impurities (in ppm):
Aluminium (Al) max. 0.05
Arsenic (As) max. 0.05
Barium (Ba) max. 0.02
Beryllium (Be) max. 0.0 1
Cadmium (Cd) max. 0.02
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0. 1
Cobalt (Co) max. 0.0 1
Copper (Cu) max. 0.0 1
Germanium (Ge) max. 0.05
Iron (Fe) max. 0. 1
Lead (Pb) max. 0.05
Lithium (Li) max. 0.0 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.0 1
Molybdenum (Mo) max. 0.02
Nickel (Ni) max. 0.05
Potassium (K) max. 0. 1
Silver (Ag) max. 0.0 1
Sodium (Na) max. 0.5
Strontium (Sr) max. 0.0 1
Thallium (Tl) max. 0.05
Titanium (Ti) max. 0. 1
Vanadium (V) max. 0.0 1
Zinc (Zn) max. 0.05
Zirconium (Zr) max. 0. 11) At time of lot release.
PRODUCT PACKING CONT.
NO. BOX
7047.0250 250 ml
7047.1000 1 l 6
7047.2500PE 2.5 l HDPE
AHydrogen Peroxide 30% CMOS, Finyte, Finyte-1, Ultryte GradeSee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
AHydrogen Peroxide 30% MOS, VLSI, SLSI GradeSee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
AHydrogen Peroxide SolutionSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
Hydro
220
MediaWare No: 180 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 221 2-DEC-05 10:36:43 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
1115Hydroquinone’BAKER’
A C6H4(OH)2
M = 1 1 0. 1 1 g/mol
FLASHPOINT 1 65 °C
CAS NO. 1 23-3 1 -9
EINECS 204-6 17-8
NC CODE 2907 22 00
EC NO. 604 005 00 4
UN/ID NO. 2662
ADR/RID 6. 1 T2
IMDG 6. 1 /III
R: 22-40-4 1 -43-50
S: 26-36/37/39-6 1
oN
dangerousfor theenvironment
4Xn
harmful
Heavy Metals (as Pb) max. 0.00 1%
Melting Point 172- 174°C
Residue after Ignition max. 0.05%
PRODUCT PACKING CONT.
NO. BOX
1115.0250 250 g
CHydroxyacetic AcidSee Glycollic Acid
Co-HydroxybenzaldehydeSee Salicylaldehyde
C(2-Hydroxyethl)mercaptanSee 2-Mercaptoethanol
CHydroxylamine HydrochlorideSee Hydroxylammonium Chloride
1116Hydroxylammonium Chloride(max. 0.05 ppm Hg) / ’BAKER ANALYZED’ / ACS
A HONH3Cl
M = 69.49 g/mol
CAS NO. 5470- 1 1 - 1
EINECS 226-798-2
NC CODE 2825 10 00
EC NO. 6 12 123 00 2
UN/ID NO. 3260
ADR/RID 8 C2
IMDG 8/III
R: 22-36/38-43-48/22-50
S: 22-24-37-6 1
oN
dangerousfor theenvironment
4Xn
harmful
Exceeds ACS SpecificationsAssay min. 99.0%
Ammonium (NH4) max. 0. 1%
Clarity of alcohol solution passes test
Residue after Ignition max. 0.0 1%
Sulfur Compounds (as SO4) max. 0.005%
Titrable Free Acid max. 0.25 meq/g
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 5
Mercury (Hg) max. 0.05
PRODUCT PACKING CONT.
NO. BOX
1116.9050 50 kg
2195Hydroxylammonium Chloride’BAKER ANALYZED’ / ACS
A HONH3Cl
M = 69.49 g/mol
CAS NO. 5470- 1 1 - 1
EINECS 226-798-2
NC CODE 2825 10 00
EC NO. 6 12 123 00 2
UN/ID NO. 3260
ADR/RID 8 C2
IMDG 8/III
R: 22-36/38-43-48/22-50
S: 22-24-37-6 1
oN
dangerousfor theenvironment
4Xn
harmful
Exceeds ACS SpecificationsAssay min. 99.0%
Ammonium (NH4) max. 0. 1%
Clarity of alcohol solution passes test
Residue after Ignition max. 0.0 1%
Sulfur Compounds (as SO4) max. 0.005%
Titrable Free Acid max. 0.25 meq/g
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 5
PRODUCT PACKING CONT.
NO. BOX
2195.0100 100 g
2195.0250 250 g 6
2195.1000 1 kg
2195.9050 50 kg
Hydro
221
MediaWare No: 181 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 222 2-DEC-05 10:36:44 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
H
1521Hydroxylammonium Chloride’BAKER’
A HONH3Cl
M = 69.49 g/mol
CAS NO. 5470- 1 1 - 1
EINECS 226-798-2
NC CODE 2825 10 00
EC NO. 6 12 123 00 2
UN/ID NO. 3260
ADR/RID 8 C2
IMDG 8/III
R: 22-36/38-43-48/22-50
S: 22-24-37-6 1
oN
dangerousfor theenvironment
4Xn
harmful
Assay min. 99% PRODUCT PACKING CONT.
NO. BOX
1521.9050 50 kg
A4-Hydroxy-4-Methyl-2-Pentanone MOS GradeSee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
6016Hypophosphorous Acid50% / ’BAKER’
A H3PO2
M = 66.00 g/mol
1 l = 1 .25 kg
CAS NO. 6303-2 1 -5
EINECS 228-60 1 -5
NC CODE 28 1 1 1 9 80
UN/ID NO. 3264
ADR/RID 8 C1
IMDG 8/III
R: 34
S: 26-27-36/37/39-45
1C
corrosive
Assay 49-52%
Heavy Metals (as Pb) max. 0.002%
Identification passes test
Phosphate (PO4) max. 0.0 1%
PRODUCT PACKING CONT.
NO. BOX
6016.0500 500 ml
AICP CCV Solution I & IISee CCV Solution I & II
AICP ICS Solution AB-1&AB-2See ICS Solution AB-1 & AB-2
AICP ICV Solution I & IISee ICV Solution I & II
AICP Interference Check Standard ISee Interference Check Standard I
AICP Interference Check Standard IISee Interference Check Standard II
AICP Interference Check Standard IVSee Interference Check Standard IV
AICP Mixed Calibration Standard IIISee Mixed Calibration Standard III
AICP Mixed Calibration Standard IVSee Mixed Calibration Standard IV
AICP Mixed Calibration Standard VSee Mixed Calibration Standard V
Hydro
222
MediaWare No: 182 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 223 2-DEC-05 10:36:44 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
I
CICP Primary Drinking Water Std ISee Primary Drinking Water Standard I
CICP Trace Metal Standard ISee Trace Metal Standard I
CICP Trace Metal Standard IIISee Trace Metal Standard III
CICP Water Standard I & IISee Water Standard I & II
6119-01ICS Solution AB-1 & AB-2Matrix I : 5% nitric acid - Matrix II: 20% HCl / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
NC CODE 3822 00 00
UN/ID NO. 3264
ADR/RID 8 C1
IMDG 8/III
R: 34
S: 23-26-36/37/39-45
1C
corrosive
Kit contains one bottle of each solutionElement Concentrations of Solution I (mg/ml):
Beryllium (Be) 50
Cadmium (Cd) 100
Cobalt (Co) 50
Copper (Cu) 50
Lead (Pb) 100
Manganese (Mn) 50
Nickel (Ni) 1 00
Silver (Ag) 100
Zinc (Zn) 100
Element Concentrations of Solution II (mg/ml):
Barium (Ba) 50
Chromium (Cr) 5
Vanadium (V) 50
PRODUCT PACKING CONT.
NO. BOX
6119-01 100 ml x 2
For use in EPA Contract Laboratory Program (CLP).
Traceable to NIST.
6103-01ICV Solution I & IIMatrix I : 5% nitric acid - Matrix II: 20% HCl / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
NC CODE 3822 00 00
UN/ID NO. 3264
ADR/RID 8 C1
IMDG 8/III
R: 34
S: 23-26-36/37/39-45
1C
corrosive
Kit contains one bottle of each solutionElement Concentrations of Solution I (mg/ml):
Barium (Ba) 100
Beryllium (Be) 40
Cadmium (Cd) 50
Cobalt (Co) 100
Copper (Cu) 100
Iron (Fe) 100
Lead (Pb) 100
Manganese (Mn) 100
Nickel (Ni) 1 00
Silver (Ag) 20
Thallium (Tl) 1 00
Zinc (Zn) 100
Element Concentrations of Solution II (mg/ml):
Aluminium (Al) 1 00
Antimony (Sb) 100
Arsenic (As) 100
Calcium (Ca) 1000
Chromium (Cr) 100
Magnesium (Mg) 1000
Potassium (K) 1000
Selenium (Se) 100
Sodium (Na) 1000
Vanadium (V) 100
PRODUCT PACKING CONT.
NO. BOX
6103-01 100 ml x 2
For use in EPA Contract Laboratory Program (CLP).
Traceable to NIST.
ICV
223
MediaWare No: 183 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 224 2-DEC-05 10:36:45 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
I
1747Imidazole’BAKER ANALYZED’
A NHCH:NCH:CH
M = 68.08 g/mol
CAS NO. 288-32-4
EINECS 206-0 19-2
NC CODE 2933 29 90
UN/ID NO. 3263
ADR/RID 8 C8
IMDG 8/III
R: 22-34-63
S: 22-26-36/37/39-45
1C
corrosive
Assay min. 99.5%
Heavy Metals (as Pb) max. 0.00 1%
Iron (Fe) max. 0.00 1%
Melting Point 88-90°C
Residue after Ignition max. 0. 1%
PRODUCT PACKING CONT.
NO. BOX
1747.0100 100 g
1747.9010 10 kg
3058Immuno PBS20x concentrated / Histology
NC CODE 3822 00 00 PRODUCT PACKING CONT.
NO. BOX
3058.9010 10 l Polycube
Dilute 20 times before use.
6011-01Interference Check Standard I(Matrix: 5% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
NC CODE 3822 00 00
UN/ID NO. 3264
ADR/RID 8 C1
IMDG 8/III
R: 36/38-45
S: 26-37-45-53
3T
toxic
Elemental Concent (mg/ml):
Arsenic (As) 1000
Barium (Ba) 300
Beryllium (Be) 100
Cadmium (Cd) 300
Chromium (Cr) 300
Cobalt (Co) 300
Copper (Cu) 300
Lead (Pb) 1000
Manganese (Mn) 200
Mercury (Hg) 50
Nickel (Ni) 300
Potassium (K) 20000
Selenium (Se) 500
Silver (Ag) 300
Thallium (Tl) 1 000
Vanadium (V) 300
Zinc (Zn) 300
PRODUCT PACKING CONT.
NO. BOX
6011-01 100 ml
For use in EPA SW-846 Methods 60 10 and 200.7.
Traceable to NIST.
6012-01Interference Check Standard II(Matrix: 5 % nitric acid plus a trace of hydrofluoric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
UN/ID NO. 3264
ADR/RID 8 C1
IMDG 8/III
R: 34
S: 23-26-36/37/39-45
1C
corrosive
Elemental Concent (mg/ml):
Boron (B) 500
Molybdenum (Mo) 300
Silicon (Si) 230
Titanium (Ti) 1 000
PRODUCT PACKING CONT.
NO. BOX
6012-01 100 ml
For use in EPA SW-846 Methods 60 10 and 200.7.
Traceable to NIST.
Imida
224
MediaWare No: 184 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 225 2-DEC-05 10:36:45 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
I
6014-01Interference Check Standard IV(Matrix: 5% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
NC CODE 3822 00 00
UN/ID NO. 3264
ADR/RID 8 C1
IMDG 8/III
R: 34
S: 23-26-36/37/39-45
1C
corrosive
Elemental Concent (mg/ml):
Aluminium (Al) 1 200
Calcium (Ca) 6000
Iron (Fe) 5000
Magnesium (Mg) 3000
Sodium (Na) 1000
PRODUCT PACKING CONT.
NO. BOX
6014-01 100 ml
For use in EPA SW-846 Methods 60 10 and 200.7.
Traceable to NIST.
4876Iodide/Iodate1/128 mol/l / DILUT-IT
EINECS 23 1 -659-4
NC CODE 3822 00 00
PRODUCT PACKING CONT.
NO. BOX
4876 1 amp. 6
Volumetric Concentrate, for dilution to 1 l.
1118Iodinesublimed / ’BAKER ANALYZED’ / ACS
A I2M = 253.8 1 g/mol
CAS NO. 7553-56-2
EINECS 23 1 -442-4
NC CODE 280 1 20 00
EC NO. 53 00 1 00 3
UN/ID NO. 1 759
ADR/RID 8 C10
IMDG 8/III
R: 20/2 1 -50
S: 23-25-6 1
oN
dangerousfor theenvironment
4Xn
harmful
Exceeds ACS SpecificationsAssay min. 99.8%
Chloride and Bromine (as Cl) max. 0.003%
Non-volatile Matter max. 0.0 1%
PRODUCT PACKING CONT.
NO. BOX
1118.0100 100 g 6
1118.0250 250 g 6
1118.1000 1 kg
1118.5000 5 kg
0132Iodine’BAKER’
A I2M = 253.8 1 g/mol
CAS NO. 7553-56-2
EINECS 23 1 -442-4
NC CODE 280 1 20 00
EC NO. 53 00 1 00 3
UN/ID NO. 1 759
ADR/RID 8 C10
IMDG 8/III
R: 20/2 1 -50
S: 23-25-6 1
oN
dangerousfor theenvironment
4Xn
harmful
Assay 99.5- 100.5%
Bromides and Chlorides max. 250 ppm
Identification passes test
Non-volatile substances max. 0. 1%
PRODUCT PACKING CONT.
NO. BOX
0132.9050 50 kg
CIodineSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
Iodin
225
MediaWare No: 185 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 226 2-DEC-05 10:36:46 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
I
7577Iodine Solution0.5 mol/l 1N / ’BAKER ANALYZED’
M = 253.8 1 g/mol
1 l = 1 .26 kg
CAS NO. 7553-56-2
EINECS 23 1 -44 1 -9
NC CODE 280 1 20 00
R: 20/2 1 /22
S: 26-36/37
4Xn
harmful
Molarity (titration with Na2S2O3) 0.5M ± 0.5% PRODUCT PACKING CONT.
NO. BOX
7577.1000 1 l
Volumetric Solution, ready for use.
7463Iodine Solution0.1 mol IBr/l; 0.2N / ’BAKER ANALYZED’ / According to Hanus
FLASHPOINT 40 °C
NC CODE 280 1 20 00
UN/ID NO. 2789
ADR/RID 8 CF1
IMDG 8/II
R: 1 0-35
S: 26-36/37/39-45
1C
corrosive
Titer (N) 0. 19-0.2 1 PRODUCT PACKING CONT.
NO. BOX
7463.1000 1 l
Volumetric Solution, ready for use.
Each lot of this product is standardized potentiometrically
against NIST tracable reference standard.
6124Iodine Solution0.1 mol ICl/l, 0.2N solution / ’BAKER’ / According to Wijs
1 l = 1 .2 1 kg
FLASHPOINT 40 °C
UN/ID NO. 2920
ADR/RID 8 CF1
IMDG 8/II
R: 23/24/25-34-40-48/23-52/53-59
S: 26-36/37/39-45
oN
dangerousfor theenvironment
3T
toxic
Titer (N) 0.2 PRODUCT PACKING CONT.
NO. BOX
6124.1000 1 l 6
Keep in a cool place and tightly closed.
7210Iodine Solution0.05 mol/l 0.1N / ’BAKER ANALYZED’
EINECS 23 1 -44 1 -9
NC CODE 280 1 20 00
Titer (N) 0.0997-0. 1003 PRODUCT PACKING CONT.
NO. BOX
7210.1000 1 l
7210.2500 2.5 l
Volumetric Solution, ready for use.
Each lot of this product is standardized potentiometrically
against Sodium Thiosulfate.
7128Iodine Solution0.05 mol/l 0.1N / ’BAKER ANALYZED’
EINECS 23 1 -44 1 -9
NC CODE 280 1 20 00
Titer (N) 0.0997-0. 1003 PRODUCT PACKING CONT.
NO. BOX
7128.1000 1 l
7128.2500 2.5 l
Volumetric Solution, ready for use.
Each lot of this product is standardized potentiometrically
against Arsenic Trioxide (primary standard).
Iodin
226
MediaWare No: 186 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 227 2-DEC-05 10:36:46 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
I
4662Iodine (Iodine-Iodide)0.05 mol I2/l / DILUT-IT / 1/10 equiv. = 12.6905g; 0.1N
A I2M = 253.8 1 g/mol
CAS NO. 7553-56-2
EINECS 23 1 -44 1 -9
NC CODE 3822 00 00
PRODUCT PACKING CONT.
NO. BOX
4662 1 amp. 6
Volumetric Concentrate, for dilution to 1 l.
4660Iodine (Iodine-Iodide)0.005 mol I2/l / DILUT-IT / 1/100 equiv. = 1.269g; 0.01N
A I2M = 253.8 1 g/mol
CAS NO. 7553-56-2
EINECS 23 1 -44 1 -9
NC CODE 3822 00 00
PRODUCT PACKING CONT.
NO. BOX
4660 1 amp.
Volumetric Concentrate, for dilution to 1 l.
4601Ion Exchange Resin, Anion, IONAC NA-38’BAKER ANALYZED’
NC CODE 39 14 00 00 (strong base, alkyl quaternary ammoniumpolystyrene copolymer)Moisture 55-65%
Total Exchange Capacity (wet volume),
(meq/ml) min. 0.9
Mesh (Wet Screen Analysis):
On U.S. No. 16 Sieve max. 5%
Thru U.S. No. 50 Sieve max. 5%
PRODUCT PACKING CONT.
NO. BOX
4601.0500 500 g
OH− Form, Type I, Beads ( 16-50 Mesh).
1099Ion exchange Resin, Cation, Dowex C-211’BAKER ANALYZED’
NC CODE 39 14 00 00 Identification passes test
Total Exchange Capacity (wet volume),
(meq/ml) min. 1 .8
Mesh (Wet Screen Analysis):
On U.S. No. 16 Sieve max. 5%
Thru U.S. No. 50 Sieve max. 1%
PRODUCT PACKING CONT.
NO. BOX
1099.0500 500 g
H+ Form, Spherical Beads ( 16-50 Mesh).
1100Ion exchange Resin, Cation, Dowex HCR-W2’BAKER ANALYZED’
NC CODE 39 14 00 00 (strong acid; styrene-DVB copolymer; nuclearsulfonic acid active group)Identification passes test
Total Exchange Capacity (dry basis),
meq/g act. value reported
Total Exchange Capacity (wet volume),
(meq/ml) min. 1 .9
Mesh (Wet Screen Analysis):
On U.S. No. 16 Sieve max. 5%
Thru U.S. No. 40 Sieve max. 5%
PRODUCT PACKING CONT.
NO. BOX
1100.0500 500 g
Na+ Form, Spherical Beads ( 16-40 Mesh).
4631Ion exchange Resin, Mixed bed, IONAC NM-60’BAKER ANALYZED’
NC CODE 39 14 00 00 (strong acid/strong base; sulfonated/alkylquaternary ammonium polystyrenes)Column Capacity, kgr/cf min. 12.0
Column Capacity, meq/ml min. 0.55
Effluent Greater than 15 Megohms min. 50%
Moisture 50-60%
Mesh (Wet Screen Analysis):
On U.S. No. 16 Sieve max. 5%
Thru U.S. No. 50 Sieve max. 5%
PRODUCT PACKING CONT.
NO. BOX
4631.0500 500 g
H+/OH− Form, Type I, Beads ( 16-50 Mesh).
Ion
227
MediaWare No: 187 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 228 2-DEC-05 10:36:46 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
I
0134IronPowder / ’BAKER ANALYZED’
A Fe
M = 55.85 g/mol
CAS NO. 7439-89-6
EINECS 23 1 -096-4
NC CODE 7205 29 00
Assay min. 96.0%
Insoluble in H2SO4 max. 0.2%
Lead (Pb) max. 0.005%
Sulfide (S) max. 0.03%
Water Soluble Substances max. 0.03%
Trace Impurities (in ppm):
Arsenic (As) max. 5
PRODUCT PACKING CONT.
NO. BOX
0134.0500GL 500 g Glass
0135IronPowder / ’BAKER’ / reduced by hydrogen
A Fe
M = 55.85 g/mol
CAS NO. 7439-89-6
EINECS 23 1 -096-4
NC CODE 7205 29 00
Assay min. 96%
Acid Insoluble Substances max. 1 .25%
Lead (Pb) max. 0.003%
Trace Impurities (in ppm):
Arsenic (As) max. 8
Mercury (Hg) max. 5
PRODUCT PACKING CONT.
NO. BOX
0135.2500 2.5 kg
5764Iron 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Fe
M = 55.85 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26
4Xi
irritant
Certificate Provided Reporting Actual Lot AnalysisIron (Fe) 998- 1002 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5764.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within ± 0.2%. Typically 1000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
6929Iron 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Atomic Absorption Standard
A Fe
M = 55.85 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26-37
4Xi
irritant
Iron (Fe) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6929.0100 100 ml
6929.0500 500 ml
Prepared by dissolution of high purity raw materials (min.
99.99% spectral purity). Assays are verified by ICP against
standards traceable to NIST. Standard Reference Material
numbers (SRM) are printed on each label.
6812Iron 1000 mg/ml’BAKER ANALYZED’ / Atomic Absorption Standard
A Fe
M = 55.85 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26-37
4Xi
irritant
Iron (Fe) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6812.0100 100 ml
6812.0500 500 ml
Iron(III)nitrate in nitric acid 0.5 mol/l.
Iron
228
MediaWare No: 188 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 229 2-DEC-05 10:36:47 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
I
5731Iron 10000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Fe
M = 55.85 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26
4Xi
irritant
Certificate Provided Reporting Actual Lot AnalysisIron (Fe) 9980- 10020 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5731.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within 0.2 %. Typically 10000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
CIron Ammonium SulfateSee Ammonium Iron (II) Sulfate Hexahydrate
0125Iron(II) Chloride Tetrahydrate’BAKER ANALYZED’
A FeCl2.4H2O
M = 1 98.8 1 g/mol
CAS NO. 1 3478- 10-9
EINECS 2 13-843-4
NC CODE 2827 33 00
UN/ID NO. 3260
ADR/RID 8 C2
IMDG 8/III
R: 22-38-4 1
S: 26-39
4Xn
harmful
Assay min. 99.0%
Appearance of solution passes test
Arsenic (As) max. 0.00 1%
Copper (Cu) max. 0.005%
Insoluble Matter max. 0.0 1%
Phosphate (PO4) max. 0.00 1%
Sulfate (SO4) max. 0.0 1%
Zinc (Zn) max. 0.005%
PRODUCT PACKING CONT.
NO. BOX
0125.0250 250 g
0125.9050 50 kg
9051Iron(III) Chloride Anhydrous’BAKER’
A FeCl3M = 1 62.22 g/mol
CAS NO. 7705-08-0
EINECS 23 1 -729-4
NC CODE 2827 33 00
UN/ID NO. 1 773
ADR/RID 8 C2
IMDG 8/II
R: 22-34-4 1
S: 26-36/39-45
1C
corrosive
Assay min. 98% PRODUCT PACKING CONT.
NO. BOX
9051.1000 1 kg
0119Iron(III) Chloride HexahydrateLump / ’BAKER ANALYZED’ / ACS
A FeCl3.6H2O
M = 270.30 g/mol
CAS NO. 1 0025-77- 1
EINECS 23 1 -729-4
NC CODE 2827 33 00
R: 22-38-4 1
S: 26-39
4Xn
harmful
Meets ACS SpecificationsAssay (by Iodometry) 97.0- 102.0%
Calcium (Ca) max. 0.0 1%
Copper (Cu) (by AAS) max. 0.003%
Ferrous Iron (as Fe) max. 0.002%
Insoluble Matter max. 0.0 1%
Magnesium (Mg) max. 0.005%
Nitrate (NO3) max. 0.0 1%
Phosphorus Compounds (as PO4) max. 0.0 1%
Potassium (K) max. 0.005%
Sodium (Na) max. 0.05%
Sulfate (SO4) max. 0.0 1%
Zinc (Zn) (by AAS) max. 0.003%
PRODUCT PACKING CONT.
NO. BOX
0119.0100 100 g
0119.1000 1 kg 6
IronI
229
MediaWare No: 189 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 230 2-DEC-05 10:36:47 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
I
0121Iron(III) Nitrate Nonahydrate’BAKER ANALYZED’ / ACS
A Fe(NO3)3.9H2O
M = 404.00 g/mol
CAS NO. 7782-6 1 -8
EINECS 233-899-5
NC CODE 2834 29 80
UN/ID NO. 1 466
ADR/RID 5. 1 O2
IMDG 5. 1 /III
R: 36/38-8
S: 26
4Xi
irritant2
O
oxidizing
Exceeds ACS SpecificationsAssay (by Iodometry) 98.0- 10 1 .0%
Insoluble Matter max. 0.005%
Manganese (Mn) max. 0.0 1%
pH of 5% Solution at 25°C 1 .5-2.5
Substances not Precipitated by NH4OH (as
SO4) max. 0. 1%
Sulfate (SO4) max. 0.0 1%
Trace Impurities (in ppm):
Chloride (Cl) max. 5
PRODUCT PACKING CONT.
NO. BOX
0121.1000 1 kg
0122Iron(III) Oxide’BAKER ANALYZED’
A Fe2O3
M = 1 59.69 g/mol
CAS NO. 1 309-37- 1
EINECS 2 15- 168-2
NC CODE 282 1 10 00
Assay (by Iodometry) min. 98.0%
Copper (Cu) (by AAS) max. 0.0 1%
Insoluble in HCl max. 0.2%
Manganese (Mn) (by AAS) max. 0.05%
Phosphate (PO4) max. 0.02%
Sulfate (SO4) max. 0.2%
Zinc (Zn) (by AAS) max. 0.0 1%
PRODUCT PACKING CONT.
NO. BOX
0122.0500 500 g
0122.9012 12 kg PE Pail
AIron ReducedSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
0123Iron(III) Sulfate n-Hydrate’BAKER ANALYZED’
A Fe2(SO4)3.nH2O
CAS NO. 1 5244- 10-7
EINECS 233-072-9
NC CODE 2833 29 50
R: 22-4 1
S: 26
4Xn
harmful
Assay (Fe2(SO4)3) min. 73.0%
Chloride (Cl) max. 0.002%
Copper (Cu) max. 0.005%
Ferrous Iron (as Fe) max. 0.02%
Insoluble Matter max. 0.02%
Nitrate (NO3) max. 0.0 1%
Substances not Precipitated by NH4OH (as
SO4) max. 0. 1%
Zinc (Zn) max. 0.005%
PRODUCT PACKING CONT.
NO. BOX
0123.1000 1 kg
0126Iron(II) Sulfate Heptahydrate’BAKER ANALYZED’ / ACS
A FeSO4.7H2O
M = 278.02 g/mol
CAS NO. 7782-63-0
EINECS 23 1 -753-5
NC CODE 2833 29 50
R: 22-4 1
S: 26
4Xn
harmful
Meets ACS SpecificationsAssay (by KMnO4 titrn.) min. 99.0%
Calcium (Ca) max. 0.005%
Chloride (Cl) max. 0.00 1%
Copper (Cu) max. 0.005%
Ferric ion (Fe+) max. 0. 1%
Insoluble Matter max. 0.0 1%
Magnesium (Mg) max. 0.002%
Manganese (Mn) max. 0.05%
Phosphate (PO4) max. 0.00 1%
Potassium (K) max. 0.002%
Sodium (Na) max. 0.02%
Zinc (Zn) max. 0.005%
PRODUCT PACKING CONT.
NO. BOX
0126.0500 500 g 6
IronI
230
MediaWare No: 190 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 231 2-DEC-05 10:36:48 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
I
0127Iron(II) Sulfate Heptahydrate’BAKER’
A FeSO4.7H2O
M = 278.02 g/mol
CAS NO. 7782-63-0
EINECS 23 1 -753-5
NC CODE 2833 29 50
R: 22-4 1
S: 26
4Xn
harmful
Assay 98.0- 105.0%
Appearance of solution passes test
Chlorides (as Cl) max. 300 ppm
Ferric Ions max. 0.5%
Heavy Metals (as Pb) max. 50 ppm
Identification passes test
Manganese (Mn) max. 0. 1%
pH 3.0-4.0
Zinc (Zn) max. 500 ppm
PRODUCT PACKING CONT.
NO. BOX
0127.1000 1 kg
0127.9050 50 kg
CIron SesquinoxideSee Iron(III) Oxide
8010Isoamyl Alcohol’BAKER ANALYZED’
A (CH3)2CHCH2CH2OH
M = 88. 15 g/mol
1 l = 0.8 1 kg
FLASHPOINT 43 °C
CAS NO. 1 23-5 1 -3
EINECS 204-633-5
NC CODE 2905 15 00
UN/ID NO. 1 1 05
ADR/RID 3 F 1
IMDG 3/III
R: 1 0-20
S: 24/25
4Xn
harmful
Assay (by GC) min. 98%
Acids and Esters (as Amyl Acetate) max. 0.06%
Aldehydes passes test
Boiling Range 128- 132°C
Color (APHA) max. 5
Residue after Evaporation max. 0.003%
Substances Darkened by H2SO4 passes test
Titrable Acid (meq/g) max. 0.002
Water (H2O) max. 0.2%
Trace Impurities (in ppm):
Aluminium (Al) max. 0.5
Barium (Ba) max. 0. 1
Boron (B) max. 0.02
Cadmium (Cd) max. 0.05
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0.02
Cobalt (Co) max. 0.02
Copper (Cu) max. 0.02
Iron (Fe) max. 0. 1
Lead (Pb) max. 0. 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.02
Nickel (Ni) max. 0.02
Tin (Sn) max. 0. 1
Zinc (Zn) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
8010.1000 1 l 6
8010.9010 10 l Jerrycan
8010.9025 25 l
8010.9200 200 l
For safe handling of 25 l tin cans, see Self-closing tap.
9048-03Isobutyl Alcohol’BAKER HPLC ANALYZED’ / For use in High Performance Liquid Chromatography
A (CH3)2CHCH2OH
M = 74. 12 g/mol
1 l = 0.80 kg
FLASHPOINT 27 °C
CAS NO. 78-83- 1
EINECS 20 1 - 148-0
NC CODE 2905 14 90
EC NO. 603 004 00 6
UN/ID NO. 1 2 12
ADR/RID 3 F 1
IMDG 3/III
R: 1 0-22-37/38-4 1 -67
S: 1 3-26-37/39-46-7/9
4Xn
harmful
Assay (by GC) (corrected for water) min. 99.5%
Residue after Evaporation max. 5 ppm
Water (by KF, coulometric) max. 0.05%
Ultraviolet Absorbance (1.00-cm path vs water):
at 254 nm max. 0.05
at 280 nm max. 0.02
at 350 nm max. 0.0 1
UV Cut-off, nm max. 220
PRODUCT PACKING CONT.
NO. BOX
9048-03 4 l Glass
Isobu
231
MediaWare No: 191 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 232 2-DEC-05 10:36:48 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
I
8056Isobutyl Alcohol’BAKER ANALYZED’
A (CH3)2CHCH2OH
M = 74. 12 g/mol
1 l = 0.80 kg
FLASHPOINT 27 °C
CAS NO. 78-83- 1
EINECS 20 1 - 148-0
NC CODE 2905 14 90
EC NO. 603 004 00 6
UN/ID NO. 1 2 12
ADR/RID 3 F 1
IMDG 3/III
R: 1 0-22-37/38-4 1 -67
S: 1 3-26-37/39-46-7/9
4Xn
harmful
Assay (by GC) min. 99.0 %
Carbonyl Compounds max. 0. 1%
Color (APHA) max. 10
Residue after Evaporation max. 0.00 1%
Solubility in Water passes test
Titrable Acid (meq/g) max. 0.0005
Water (H2O) max. 0. 1%
Trace Impurities (in ppm):
Aluminium (Al) max. 0.5
Barium (Ba) max. 0. 1
Boron (B) max. 0.02
Cadmium (Cd) max. 0.05
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0.02
Cobalt (Co) max. 0.02
Copper (Cu) max. 0.02
Iron (Fe) max. 0. 1
Lead (Pb) max. 0. 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.02
Nickel (Ni) max. 0.02
Tin (Sn) max. 0. 1
Zinc (Zn) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
8056.1000 1 l 6
8210Isobutyl Alcohol’BAKER’
A (CH3)2CHCH2OH
M = 74. 12 g/mol
1 l = 0.80 kg
FLASHPOINT 27 °C
CAS NO. 78-83- 1
EINECS 20 1 - 148-0
NC CODE 2905 14 90
EC NO. 603 004 00 6
UN/ID NO. 1 2 12
ADR/RID 3 F 1
IMDG 3/III
R: 1 0-22-37/38-4 1 -67
S: 1 3-26-37/39-46-7/9
4Xn
harmful
Boiling Range 106- 109°C
Residue after Evaporation max. 0.005%
Water (H2O) max. 0.5%
PRODUCT PACKING CONT.
NO. BOX
8210.2500 2.5 l
8210.9025 25 l
For safe handling of 25 l tin cans, see Self-closing tap.
AL-IsoleucineSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
AIso-OctaneSee 2,2,4-Trimethylpentane
AIsopropyl AlcoholSee 2-Propanol
AIsopropyl AlcoholSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
AIsopropyl Alcohol 70% Solution, SterileSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
Isobu
232
MediaWare No: 192 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 233 2-DEC-05 10:36:49 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
K
8821Isopropylamine’BAKER’
A (CH3)2CHNH2
M = 59. 1 1 g/mol
1 l = 0.69 kg
FLASHPOINT −37 °C
CAS NO. 75-3 1 -0
EINECS 200-860-9
NC CODE 292 1 19 30
EC NO. 6 12 007 00 1
UN/ID NO. 1 22 1
ADR/RID 3 FC
IMDG 3/I
R: 1 2-36/37/38
S: 1 6-26-29
0F+
extremelyflammable
4Xi
irritant
Boiling Point 3 1 -32°C PRODUCT PACKING CONT.
NO. BOX
8821.0100 100 ml
CKaolinSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
8792Karl Fischer Reagent5.0 mg H2O/ml / ’BAKER ANALYZED’ / Titrant for moisture determination.
1 l = 1 . 1 8 kg
FLASHPOINT A2 1 °C
NC CODE 3822 00 00
UN/ID NO. 1 993
ADR/RID 3 F 1
IMDG 3/III
R: 1 0-20/2 1 /22-60-6 1
S: 23-36/37-45-53
3T
toxic
Titer (mg H2O/ml) min. 5.0 PRODUCT PACKING CONT.
NO. BOX
8792.1000 1 l 6
8792.2500 2.5 l 4
Solution Stabilized.
Contains Pyridine, 2-Methoxyethanol and Sulfur Dioxide.
One component reagent.
8834Karl Fischer Reagent2.0 mg H2O/ml / ’BAKER ANALYZED’ / Titrant for moisture determination.
FLASHPOINT 2 1 °C
NC CODE 3822 00 00
UN/ID NO. 1 993
ADR/RID 3 F 1
IMDG 3/III
R: 1 0-20/2 1 /22-60-6 1
S: 23-36/37-45-53
3T
toxic
Titer (mg H2O/ml) min. 2.0 PRODUCT PACKING CONT.
NO. BOX
8834.1000 1 l
8834.2500 2.5 l
Solution stabilized.
Contains Pyridine, 2-Methoxyethanol and Sulfur Dioxide.
One component reagent.
CKarl Fischer ReagentsSee for detailed information section Karl Fischer reagents, page 195
Karl
233
MediaWare No: 193 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 234 2-DEC-05 10:36:49 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
K
8387Kerosene’BAKER’
1 l = 0.79 kg
FLASHPOINT 72 °C
CAS NO. 64742-96-7
EINECS 265-200-4
NC CODE 27 10 1 1 25
EC NO. 649 406 00 5
UN/ID NO. 1 223
ADR/RID 3 F 1
IMDG 3/III
R: 65
S: 23-24-62
4Xn
harmful
Boiling Range 194-250°C PRODUCT PACKING CONT.
NO. BOX
8387.5000 5 l EcoTainer
8387.9200 200 l
0116Kieselguhr’BAKER’ / For filtration
NC CODE 3802 90 00
R: 40/20
S: 22
4Xn
harmful
Appearance passes test PRODUCT PACKING CONT.
NO. BOX
0116.1000 1 kg
6069DL-Lactic Acid’BAKER ANALYZED’
A CH3CHOHCOOH
1 l = 1 .25 kg
CAS NO. 598-82-3
EINECS 20 1 - 196-2
NC CODE 29 18 1 1 00
R: 36/38
S: 24/25
4Xi
irritant
Assay (C3H6O3) 85.0-90.0%
Chloride (Cl) passes test
Citric, Oxalic, Phosphoric or Tartaric Acids passes test
Identification passes test
Readily Carbonisable Substances passes test
Residue after Ignition max. 0.05%
Specific Rotation [a]25D -0.05 to +0.05°
Sugars passes test
Sulfate (SO4) passes test
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 10
Iron (Fe) max. 10
PRODUCT PACKING CONT.
NO. BOX
6069.4000 4 l Glass
6069.9060 60 l
ADL-Lactic AcidSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
6017Lactic Acid’BAKER ANALYZED’ / ACS
A CH3CHOHCOOH
M = 90.08 g/mol
1 l = 1 .25 kg
FLASHPOINT 1 1 0 °C
CAS NO. 79-33-4
EINECS 20 1 - 196-2
NC CODE 29 18 1 1 00
R: 38-4 1
S: 24-26-37/39
4Xi
irritant
Meets ACS SpecificationsAssay 85.0-90.0%
Chloride (Cl) max. 0.00 1%
Residue after Ignition max. 0.02%
Substances Darkened by H2SO4 passes test
Sulfate (SO4) max. 0.002%
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 5
PRODUCT PACKING CONT.
NO. BOX
6017.1000 1 l
Keros
234
MediaWare No: 194 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 235 2-DEC-05 10:36:49 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
L
6060Lactic Acid’BAKER’
A CH3CHOHCOOH
M = 90.08 g/mol
1 l = 1 .25 kg
FLASHPOINT 1 1 0 °C
CAS NO. 79-33-4
EINECS 20 1 - 196-2
NC CODE 29 18 1 1 00
R: 38-4 1
S: 24-26-37/39
4Xi
irritant
Assay (C3H6O3) 88.0-90.5%
Appearance passes test
Calcium (Ca) max. 200 ppm
Citric, oxalic or phosphoric acid passes test
Ether-insoluble Substances passes tes
Identification passes test
Sugars and other Reducing Substances passes test
Sulfated Ash max. 0.05%
Sulfates (as SO4) max. 200 ppm
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 10 ppm
PRODUCT PACKING CONT.
NO. BOX
6060.1000 1 l
CLactic AcidSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
CLactic Acid, Sodium SaltSee Sodium Lactate
0138D(+)-Lactose Monohydrate’BAKER ANALYZED’ Biochemical / ACS
A C12H22O1 1.H2O
M = 360.32 g/mol
CAS NO. 1 0039-26-6
EINECS 200-559-2
NC CODE 1 702 1 1 00
Exceeds ACS SpecificationsDextrose passes test
Insoluble Matter max. 0.005%
Residue after Ignition max. 0.03%
Sucrose passes test
Water (H2O) 4.0-6.0%
Trace Impurities (in ppm):
Dextrin, Starch max. 5
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 5
PRODUCT PACKING CONT.
NO. BOX
0138.1000 1 kg
CLactose, MonohydrateSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
CLanolinSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
6947Lanthanum 1% (w/v)lanthanum chloride (99.999%) in 0.3M hydrochloric acid / ’BAKER INSTRA-ANALYZED’ / Atomic Absorption Standard
NC CODE 3822 00 00 Chloride (Cl) passes test
Lanthanum Content (La) 0.95- 1 .05%
PRODUCT PACKING CONT.
NO. BOX
6947.0500 500 ml
Prepared by dissolution of high purity raw materials (min.
99.99% spectral purity). Assays are verified by ICP against
standards traceable to NIST. Standard Reference Material
numbers (SRM) are printed on each label.
6948Lanthanum 1% (w/v)lanthanum nitrate (99.999%) in 0.3M nitric acid / ’BAKER INSTRA-ANALYZED’ / Atomic Absorption Standard
NC CODE 3822 00 00
R: 36/38
S: 26-3 1
4Xi
irritant
Lanthanum (La) 0.95- 1 .05%
Nitrate (NO3) passes test
PRODUCT PACKING CONT.
NO. BOX
6948.0500 500 ml
Prepared by dissolution of high purity raw materials (min.
99.99% spectral purity). Assays are verified by ICP against
standards traceable to NIST. Standard Reference Material
numbers (SRM) are printed on each label.
Lanth
235
MediaWare No: 195 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 236 2-DEC-05 10:36:50 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
L
6949Lanthanum 1000 mg/ml0.10% (w/v) / (Matrix: 1% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Atomic Absorption Standard
A La
M = 1 38.90 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26
4Xi
irritant
Lanthanum (La) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6949.0100 100 ml
6949.0500 500 ml
Prepared by dissolution of high purity raw materials (min.
99.99% spectral purity). Assays are verified by ICP against
standards traceable to NIST. Standard Reference Material
numbers (SRM) are printed on each label.
0383Lanthanum Chloride 7-Hydrate’BAKER ANALYZED’ / for Atomic Absorption / Flame Photometric Methods / ACS
A LaCl3.7H2O
M = 37 1 .38 g/mol
CAS NO. 1 0099-58-8
EINECS 233-237-5
NC CODE 2846 90 00
Exceeds ACS SpecificationsAssay (LaCl3) 64.5-70.0%
Calcium (Ca) max. 0.00 1%
Insoluble Matter max. 0.0 1%
Trace Impurities (in ppm):
Magnesium (Mg) max. 1
PRODUCT PACKING CONT.
NO. BOX
0383.0025 25 g Glass 6
0383.0100 100 g
0597Lanthanum Nitrate Hexahydrate’BAKER’ / for Atomic Absorption / Flame Photometric Methods
A La(NO3)3.6H2O
M = 433.02 g/mol
CAS NO. 1 0277-43-7
EINECS 233-238-0
NC CODE 2846 90 00
UN/ID NO. 1 477
ADR/RID 5. 1 O2
IMDG 5. 1 /II
R: 4 1 -8
S: 26-39
4Xi
irritant2
O
oxidizing
Calcium (Ca) (by AAS) max. 0.00 1% PRODUCT PACKING CONT.
NO. BOX
0597.0100 100 g
4991Lanthanum OxidePowder / ULTREX Ultrapure Reagent
A La2O3
M = 325.84 g/mol
CAS NO. 1 3 12-8 1 -8
EINECS 2 15-200-5
NC CODE 2846 90 00
Certificate Provided Reporting Actual Lot AnalysisActual Lot Analysis Lot. No. B32431Assay (by EDTA titrn.) 99.3%
Loss on Ignition at 1 1 50°C 0.6%
Particulate Matter a 0.000 1%
Metallic Impurities in parts per million (mg/g):
Aluminium (Al) a 1
Calcium (Ca) a 0.5
Copper (Cu) a 1
Iron (Fe) a 1
Lead (Pb) a 1 0
Magnesium (Mg) a 0.3
Potassium (K) a 0.5
Rare Earths a 1 0
Silver (Ag) a 1
Sodium (Na) a 0.3
Tin (Sn) a 1 0
Non-Metallic Impurities in parts per million (mg/g):
Halide (as Cl) 5
Silicon (Si) a 1
Sulfur Compounds (as SO4) 3
PRODUCT PACKING CONT.
NO. BOX
4991.0100 100 g PE
For Laboratory, Research or Manufacturing Use.
ALauryl AlcoholSee 1-Dodecanol
Lanth
236
MediaWare No: 196 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 237 2-DEC-05 10:36:50 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
L
5765Lead 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Pb
M = 207.2 1 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26
4Xi
irritant
Certificate Provided Reporting Actual Lot AnalysisLead (Pb) 998- 1002 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5765.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within ± 0.2%. Typically 1000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
6930Lead 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Atomic Absorption Standard
A Pb
M = 207.20 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26-37
4Xi
irritant
Lead (Pb) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6930.0100 100 ml
6930.0500 500 ml
Prepared by dissolution of high purity raw materials (min.
99.99% spectral purity). Assays are verified by ICP against
standards traceable to NIST. Standard Reference Material
numbers (SRM) are printed on each label.
6813Lead 1000 mg/ml’BAKER ANALYZED’ / Atomic Absorption Standard
A Pb
M = 207.2 1 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26-37
4Xi
irritant
Lead (Pb) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6813.0100 100 ml
6813.0500 500 ml
Lead(II)nitrate in nitric acid 0.5 mol/l.
5732Lead 10000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Pb
M = 207.2 1 g/mol
NC CODE 3822 00 00
R: 22-33-36/38-52/53-6 1
S: 26-45-6 1
3T
toxic
Certificate Provided Reporting Actual Lot AnalysisLead (Pb) 9980- 10020 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5732.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within 0.2 %. Typically 10000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
0142Lead Acetate Basic Anhydrous’BAKER ANALYZED’ / For sugar analysis / ACS
CAS NO. 1 335-32-6
EINECS 2 15-630-3
NC CODE 29 15 29 00
EC NO. 82 007 00 9
UN/ID NO. 1 6 16
ADR/RID 6. 1 T5
IMDG 6. 1 /III
R: 33-40-48/22-50/53-6 1 -62
S: 45-53-60-6 1
oN
dangerousfor theenvironment
3T
toxic
Exceeds ACS SpecificationsBasic Lead (PbO) min. 33.0%
Calcium (Ca) max. 0.0 1%
Chloride (Cl) max. 0.002%
Copper (Cu) max. 0.002%
Insoluble in Dilute Acetic Acid max. 0.02%
Insoluble in Water max. 1 .0%
Iron (Fe) max. 0.002%
Loss on Drying at 105°C max. 1 .5%
Nitrate and Nitrite (as NO3) max. 0.003%
Potassium (K) max. 0.02%
Sodium (Na) max. 0.05%
PRODUCT PACKING CONT.
NO. BOX
0142.1000 1 kg 6
Lead
237
MediaWare No: 197 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 238 2-DEC-05 10:36:51 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
L
0141Lead(II) Acetate Trihydrate’BAKER ANALYZED’ / ACS
A Pb(CH3COO)2.3H2O
M = 379.33 g/mol
CAS NO. 6080-56-4
EINECS 206- 104-4
NC CODE 29 15 29 00
EC NO. 82 005 00 8
UN/ID NO. 1 6 16
ADR/RID 6. 1 T5
IMDG 6. 1 /III
R: 33-48/22-50/53-6 1 -62
S: 45-53-60-6 1
oN
dangerousfor theenvironment
3T
toxic
Exceeds ACS SpecificationsAssay 99.0- 103.0%
Calcium (Ca) max. 0.005%
Copper (Cu) max. 0.002%
Insoluble Matter max. 0.0 1%
Iron (Fe) max. 0.00 1%
Nitrate and Nitrite (as NO3) max. 0.005%
pH of 5% Solution at 25°C 5.5-6.5
Potassium (K) max. 0.005%
Sodium (Na) max. 0.0 1%
Trace Impurities (in ppm):
Chloride (Cl) max. 5
PRODUCT PACKING CONT.
NO. BOX
0141.0250 250 g
0145Lead(II) Chloride’BAKER ANALYZED’
A PbCl2M = 278. 10 g/mol
CAS NO. 7758-95-4
EINECS 23 1 -845-5
NC CODE 2827 39 80
EC NO. 82 00 1 00 6
UN/ID NO. 229 1
ADR/RID 6. 1 T5
IMDG 6. 1 /III
R: 20/22-33-50/53-6 1 -62
S: 45-53-60-6 1
oN
dangerousfor theenvironment
3T
toxic
Assay (by EDTA titrn.) min. 99.0%
Copper (Cu) max. 0.005%
Insoluble Matter max. 0.0 1%
Iron (Fe) max. 0.00 1%
Nitrate (NO3) max. 0.005%
Sulfate (SO4) max. 0.0 1%
PRODUCT PACKING CONT.
NO. BOX
0145.0500 500 g
0148Lead(II) Nitrate’BAKER ANALYZED’
A Pb(NO3)2
M = 33 1 .20 g/mol
CAS NO. 1 0099-74-8
EINECS 233-245-9
NC CODE 2834 29 80
EC NO. 82 00 1 00 6
UN/ID NO. 1 469
ADR/RID 5. 1 OT2
IMDG 5. 1 /II
R: 20/22-33-50/53-6 1 -62
S: 45-53-60-6 1
oN
dangerousfor theenvironment
3T
toxic
Exceeds ACS SpecificationsAssay (by EDTA titrn.) min. 99.0%
Calcium (Ca) max. 0.005%
Chloride (Cl) max. 0.00 1%
Copper (Cu) max. 0.002%
Insoluble Matter max. 0.005%
Iron (Fe) max. 0.00 1%
pH of 5% Solution at 25°C 3.5-4.2
Potassium (K) max. 0.005%
Sodium (Na) max. 0.02%
PRODUCT PACKING CONT.
NO. BOX
0148.0100 100 g
0148.9050 50 kg
LeadI
238
MediaWare No: 198 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 239 2-DEC-05 10:36:51 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
L
2338Lead(II) Oxide (Litharge)powder / ’BAKER ANALYZED’ / ACS
A PbO
M = 223. 19 g/mol
CAS NO. 1 3 17-36-8
EINECS 2 15-267-0
NC CODE 2824 10 00
EC NO. 82 00 1 00 6
UN/ID NO. 229 1
ADR/RID 6. 1 T5
IMDG 6. 1 /III
R: 20/22-33-50/53-6 1 -62
S: 45-53-60-6 1
oN
dangerousfor theenvironment
3T
toxic
Meets ACS SpecificationsAssay min. 99.0%
Average Particle Diameter, mm (APD) act. value reported
Bulk Density (g/cc)(typical) act. value reported
Calcium (Ca) max. 0.005%
Chloride (Cl) max. 0.002%
Copper (Cu) max. 0.005%
Insoluble in CH3COOH max. 0.02%
Nitrate (NO3) max. 0.0 1%
Potassium (K) max. 0.005%
Silicon (Si) act. value reported
Sodium (Na) max. 0.02%
Specific Surface Area, m2/g (typical) act. value reported
Mesh (Wet Screen Analysis):
On U.S. No. 325 Sieve act. value reported
Trace Impurities (in ppm):
Iron (Fe) max. 5
Silver (Ag) max. 5
PRODUCT PACKING CONT.
NO. BOX
2338.0500PE 500 ml HDPE
CLead SubacetateSee Lead Acetate Basic Anhydrous
3879LeishmanHematology
1 l = 0.79 kg
FLASHPOINT 1 1C °C
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
Leihsmans stain for differential blood picturestaining
PRODUCT PACKING CONT.
NO. BOX
3879.1000 1 l Glass
3879.2500 2.5 l Glass
3813Leishman StainHematology
CAS NO. 1 2627-53- 1
EINECS 235-732- 1
R: 36
S: 26
4Xi
irritant
Leihsmans stain for differential blood picturestaining
PRODUCT PACKING CONT.
NO. BOX
3813.0025 25 g Glass
CL-LeucineSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
CLevuloseSee D(-)Fructose
5766Lithium 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Li
M = 6.94 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26
4Xi
irritant
Certificate Provided Reporting Actual Lot AnalysisLithium (Li) 998- 1002 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5766.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within ± 0.2%. Typically 1000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
Lithi
239
MediaWare No: 199 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 240 2-DEC-05 10:36:52 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
L
6931Lithium 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Atomic Absorption Standard
A Li
M = 6.94 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26-37
4Xi
irritant
Lithium (Li) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6931.0100 100 ml
6931.0500 500 ml
Prepared by dissolution of high purity raw materials (min.
99.99% spectral purity). Assays are verified by ICP against
standards traceable to NIST. Standard Reference Material
numbers (SRM) are printed on each label.
6814Lithium 1000 mg/ml’BAKER ANALYZED’ / Atomic Absorption Standard
A Li
M = 6.94 g/mol
NC CODE 3822 00 00
Lithium (Li) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6814.0100 100 ml
6814.0500 500 ml
Lithium chloride in water.
5733Lithium 10000 mg/ml(Matrix: 7% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Li
M = 6.94 g/mol
NC CODE 3822 00 00
UN/ID NO. 203 1
ADR/RID 8 CO1
IMDG 8/II
R: 34
S: 20-23-26-36/37/39-45
1C
corrosive
Certificate Provided Reporting Actual Lot AnalysisLithium (Li) 9980- 10020 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5733.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within 0.2 %. Typically 10000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
0382Lithium meta-Borate’BAKER ANALYZED’ / ACS
A LiBO2
M = 49.75 g/mol
CAS NO. 1 3453-69-5
EINECS 236-63 1 -5
NC CODE 2840 20 90
Exceeds ACS Specifications. Meets ReagentsSpecifications for testing USP/NF monographsAssay (LiBO2) 98.0- 102.0%
Aluminium (Al) max. 0.00 1%
Bulk Density min. 0.25 g/ml
Calcium (Ca) max. 0.0 1%
Heavy Metals (as Pb) max. 0.00 1%
Insoluble Matter max. 0.0 1%
Iron (Fe) max. 0.00 1%
Loss on Fusion at 950°C max. 2.0%
Phosphorus Compounds (as PO4) max. 0.004%
Potassium (K) max. 0.005%
Silicon (Si) max. 0.005%
Sodium (Na) max. 0.005%
Trace Impurities (in ppm):
Magnesium (Mg) max. 5
PRODUCT PACKING CONT.
NO. BOX
0382.0100 100 g
The formula weight of this reagent is likely to deviate from
the value cited above, since the natural distribution of 6Li
and 7Li isotopes is often altered in current sources of
lithium compounds.
Lithi
240
MediaWare No: 200 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 241 2-DEC-05 10:36:52 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
L
0155Lithium Carbonate’BAKER ANALYZED’
A Li2CO3
M = 73.89 g/mol
CAS NO. 554- 13-2
EINECS 209-062-5
NC CODE 2836 9 1 00
R: 22-38
S: 22
4Xn
harmful
Assay min. 99.0%
Calcium (Ca) max. 0.0 1%
Chloride (Cl) max. 0.005%
Heavy Metals (as Pb) max. 0.002%
Insoluble in HCl max. 0.0 1%
Iron (Fe) max. 0.002%
Potassium (K) max. 0.005%
Sodium (Na) max. 0.0 1%
Total Sulfur (as SO4) max. 0.2%
Trace Impurities (in ppm):
Ammonium (NH4) max. 5
Nitrate (NO3) max. 5
PRODUCT PACKING CONT.
NO. BOX
0155.0100 100 g
0155.9050 50 kg
4002Lithium Chloride’BAKER ULTRAPURE BIOREAGENT’
A LiCl
M = 42.39 g/mol
CAS NO. 7447-4 1 -8
EINECS 23 1 -2 12-3
NC CODE 2827 39 80
R: 22-36/38
S: 24
4Xn
harmful
Assay (argentometric titrn.) min. 99.0%
Calcium (Ca) (by FES) max. 0.0 1%
DNase Activity none detected
Heavy Metals (as Pb) max. 0.002%
Insoluble Matter max. 0.0 1%
Iron (Fe) max. 0.00 1%
Loss on Drying at 105°C max. 1 .0%
Potassium (K) (by FES) max. 0.0 1%
Protease Activity none detected
RNase Activity none detected
Sodium (Na) (by FES) max. 0.2%
Titrable Base (meq/g) max. 0.008
PRODUCT PACKING CONT.
NO. BOX
4002.0500 500 g
4002.2500 2.5 kg
0156Lithium Chloride’BAKER ANALYZED’ / ACS
A LiCl
M = 42.39 g/mol
CAS NO. 7447-4 1 -8
EINECS 23 1 -2 12-3
NC CODE 2827 39 80
R: 22-36/38
S: 24
4Xn
harmful
Meets ACS SpecificationsAssay min. 99%
Barium (Ba) max. 0.003%
Calcium (Ca) max. 0.0 1%
Heavy Metals (as Pb) max. 0.002%
Insoluble Matter max. 0.0 1%
Iron (Fe) max. 0.00 1%
Loss on Drying at 105°C max. 1 .0%
Nitrate (NO3) max. 0.00 1%
Potassium (K) max. 0.0 1%
Sodium (Na) max. 0.20%
Sulfate (SO4) max. 0.0 1%
Titrable Base (meq/g) max. 0.008
PRODUCT PACKING CONT.
NO. BOX
0156.0100 100 g 6
0156.1000 1 kg
0156.5000 5 kg
0156.9050 50 kg
0157Lithium Chloride’BAKER’
A LiCl
M = 42.39 g/mol
CAS NO. 7447-4 1 -8
EINECS 23 1 -2 12-3
NC CODE 2827 39 80
R: 22-36/38
S: 24
4Xn
harmful
Assay (argentometric titrn.) min. 98.0%
Heavy Metals (as Pb) max. 0.0 1%
Insoluble Matter max. 0.05%
pH of 5% Solution at 25°C 6.0-9.0
Sodium (Na) max. 0.2%
PRODUCT PACKING CONT.
NO. BOX
0157.0250 250 g
0157.9050 50 kg
Lithi
241
MediaWare No: 201 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 242 2-DEC-05 10:36:53 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
L
0158Lithium Nitrate’BAKER ANALYZED’
A LiNO3
M = 68.94 g/mol
CAS NO. 7790-69-4
EINECS 232-2 18-9
NC CODE 2834 29 80
UN/ID NO. 2722
ADR/RID 5. 1 O2
IMDG 5. 1 /III
R: 8
S: 1 7-24/25
2O
oxidizing
Assay (acidimetric) min. 97.0%
Barium (Ba) max. 0.002%
Calcium (Ca) (by FES) max. 0.02%
Chloride (Cl) max. 0.002%
Heavy Metals (as Pb) max. 0.00 1%
Insoluble Matter max. 0.0 1%
Iron (Fe) max. 0.00 1%
Potassium (K) (by FES) max. 0.05%
Sodium (Na) (by FES) max. 0.05%
Sulfate (SO4) max. 0. 1%
PRODUCT PACKING CONT.
NO. BOX
0158.0500 500 g 6
1465Lithium Tetraborate’BAKER INSTRA-ANALYZED’
A Li2B4O7
M = 1 69. 12 g/mol
CAS NO. 1 2007-60-2
EINECS 234-5 14-3
NC CODE 2840 20 90
Assay (dried basis) min. 99.5%
Loss on Drying at 285°C max. 1%
Metallic and Non-metallic Impurities (by DC-arc
Spectrography) (in ppm):
Aluminium (Al) max. 30
Calcium (Ca) max. 100
Chromium (Cr) max. 20
Cobalt (Co) max. 50
Copper (Cu) max. 20
Iron (Fe) max. 30
Lead (Pb) max. 20
Magnesium (Mg) max. 10
Manganese (Mn) max. 50
Nickel (Ni) max. 20
Potassium (K) max. 50
Silicon (Si) max. 80
Sodium (Na) max. 150
PRODUCT PACKING CONT.
NO. BOX
1465.0500 500 g
Flux Grade.
AL-Lysine HydrochlorideSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
1120MagnesiumChips / ’BAKER’
A Mg
M = 24.30 g/mol
CAS NO. 7439-95-4
EINECS 23 1 - 104-6
NC CODE 8 104 30 00
EC NO. 1 2 002 00 9
UN/ID NO. 1 869
ADR/RID 4. 1 F3
IMDG 4. 1 /III
R: 1 1 - 1 5
S: 43A-7/8
0F
highlyflammable
Assay min. 99% PRODUCT PACKING CONT.
NO. BOX
1120.0500 500 g
Lithi
242
MediaWare No: 202 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 243 2-DEC-05 10:36:53 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
5767Magnesium 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Mg
M = 24.3 1 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26
4Xi
irritant
Certificate Provided Reporting Actual Lot AnalysisMagnesium (Mg) 998- 1002 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5767.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within ± 0.2%. Typically 1000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
6932Magnesium 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Atomic Absorption Standard
A Mg
M = 24.3 1 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26-37
4Xi
irritant
Magnesium (Mg) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6932.0100 100 ml
6932.0500 500 ml
Prepared by dissolution of high purity raw materials (min.
99.99% spectral purity). Assays are verified by ICP against
standards traceable to NIST. Standard Reference Material
numbers (SRM) are printed on each label.
6815Magnesium 1000 mg/ml’BAKER ANALYZED’ / Atomic Absorption Standard
A Mg
M = 24.3 1 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26-37
4Xi
irritant
Magnesium (Mg) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6815.0100 100 ml
6815.0500 500 ml
Magnesium nitrate in nitric acid 0.5 mol/l.
5734Magnesium 10000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Mg
M = 24.3 1 g/mol
NC CODE 3822 00 00
R: 36/38
S: 24/25-26-37
4Xi
irritant
Certificate Provided Reporting Actual Lot AnalysisMagnesium (Mg) 9980- 10020 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5734.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within 0.2 %. Typically 10000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
0160Magnesium Acetate Tetrahydrate’BAKER ANALYZED’ / ACS
A Mg(CH3COO)2.4H2O
M = 2 14.46 g/mol
CAS NO. 1 6674-78-5
EINECS 205-554-9
NC CODE 29 15 29 00
Meets ACS SpecificationsAssay 98.0- 102.0%
Barium (Ba) max. 0.00 1%
Calcium (Ca) max. 0.0 1%
Chloride (Cl) max. 0.00 1%
Insoluble Matter max. 0.005%
Manganese (Mn) max. 0.00 1%
Potassium (K) max. 0.005%
Sodium (Na) max. 0.005%
Strontium (Sr) max. 0.005%
Sulfate (SO4) max. 0.005%
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 5
PRODUCT PACKING CONT.
NO. BOX
0160.0250 250 g
Magne
243
MediaWare No: 203 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 244 2-DEC-05 10:36:54 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
AMagnesium CarbonateSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
0161Magnesium Carbonate n-Hydrate’BAKER ANALYZED’
A 4MgCO3.Mg(OH)2.nH2O
CAS NO. 1 2 125-28-9
EINECS 235- 192-7
NC CODE 2836 99 1 1
Assay (as MgO) 40.0-45.0%
Appearance of solution passes test
Arsenic (As) max. 2 ppm
Calcium (Ca) max. 0.75%
Chlorides (as Cl) max. 0.07%
Heavy Metals (as Pb) max. 20 ppm
Iron (Fe) max. 400 ppm
Soluble Substances max. 1 .0%
Substances Insoluble in Acetic Acid max. 0.05%
Sulfates (as SO4) max. 0.3%
PRODUCT PACKING CONT.
NO. BOX
0161.0250 250 g
4003Magnesium Chloride Hexahydrate’BAKER ULTRAPURE BIOREAGENT’
A MgCl2.6H2O
M = 203.30 g/mol
CAS NO. 779 1 - 18-6
EINECS 232-094-6
NC CODE 2827 3 1 00
Assay 99.0 - 102.0%
Ammonium (NH4) max. 0.002%
Calcium (Ca) max. 0.0 1%
DNase Activity none detected
Insoluble Matter max. 0.005%
Potassium (K) max. 0.005%
Protease Activity none detected
RNase Activity none detected
Sodium (Na) max. 0.005%
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 5
Manganese (Mn) max. 5
PRODUCT PACKING CONT.
NO. BOX
4003.0500 500 g
4003.2500 2.5 kg
0162Magnesium Chloride Hexahydrate’BAKER ANALYZED’ / ACS
A MgCl2.6H2O
M = 203.30 g/mol
CAS NO. 779 1 - 18-6
EINECS 232-094-6
NC CODE 2827 3 1 00
Meets ACS SpecificationsAssay 99.0- 102.0%
Ammonium (NH4) max. 0.002%
Barium (Ba) max. 0.005%
Calcium (Ca) max. 0.0 1%
Insoluble Matter max. 0.005%
Nitrate (NO3) max. 0.00 1%
Potassium (K) max. 0.005%
Sodium (Na) max. 0.005%
Strontium (Sr) max. 0.005%
Sulfate (SO4) max. 0.002%
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 5
Manganese (Mn) max. 5
Phosphate (PO4) max. 5
PRODUCT PACKING CONT.
NO. BOX
0162.0250 250 g 6
0162.1000 1 kg 6
0163Magnesium Chloride Hexahydrate’BAKER’
A MgCl2.6H2O
M = 203.30 g/mol
CAS NO. 779 1 - 18-6
EINECS 232-094-6
NC CODE 2827 3 1 00
Assay min. 98.5%
Heavy Metals (as Pb) max. 0.00 1%
Insoluble Substances max. 0.0 1%
pH of 5% Solution at 25°C 4.5-7.0
PRODUCT PACKING CONT.
NO. BOX
0163.1000 1 kg
AMagnesium Chloride, 6-HydrateSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
AMagnesium HydroxideSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
Magne
244
MediaWare No: 204 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 245 2-DEC-05 10:36:54 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
0164Magnesium Nitrate Hexahydrate’BAKER ANALYZED’ / ACS
A Mg(NO3)2.6H2O
M = 256.4 1 g/mol
CAS NO. 1 3446- 18-9
EINECS 233-826-7
NC CODE 2834 29 80
UN/ID NO. 1 474
ADR/RID 5. 1 O2
IMDG 5. 1 /III
R: 8
S: 24/25
2O
oxidizing
Exceeds ACS SpecificationsAssay 98.0- 102.0%
Ammonium (NH4) max. 0.002%
Barium (Ba) max. 0.002%
Calcium (Ca) max. 0.0 1%
Chloride (Cl) max. 0.00 1%
Insoluble Matter max. 0.005%
pH of 5% Solution at 25°C 5.0-7.0
Potassium (K) max. 0.005%
Sodium (Na) max. 0.005%
Strontium (Sr) max. 0.005%
Sulfate (SO4) max. 0.005%
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 5
Manganese (Mn) max. 5
Phosphate (PO4) max. 5
PRODUCT PACKING CONT.
NO. BOX
0164.0500 500 g 6
1122Magnesium Oxide’BAKER ANALYZED’ / ACS
A MgO
M = 40.30 g/mol
CAS NO. 1 309-48-4
EINECS 2 15- 17 1 -9
NC CODE 25 19 90 10
S: 22
Exceeds ACS Specifications. Meets ReagentsSpecifications for testing USP/NF monographsBarium (Ba) max. 0.005%
Calcium (Ca) max. 0.05%
Chloride (Cl) max. 0.0 1%
Heavy Metals (as Pb) max. 0.003%
Insoluble in Dilute HCl max. 0.02%
Iron (Fe) max. 0.0 1%
Loss on Ignition max. 2.0%
Manganese (Mn) max. 5 ppm
Nitrate (NO3) max. 0.005%
Potassium (K) max. 0.005%
Sodium (Na) max. 0.5%
Strontium (Sr) max. 0.005%
Sulfate and Sulfite (as SO4) max. 0.02%
Water Soluble Substances max. 0.4%
Product Information (not specifications):
Average Particle Diameter, mm (APD) (by
Sedigraph)(typical) 4
Bulk Density (g/cc)(typical) 0.5
Specific Surface Area, m2/g (typical) 7
PRODUCT PACKING CONT.
NO. BOX
1122.1000 1 kg
1122.9050 50 kg
CMagnesium OxideSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
CMagnesium PerchlorateSee Anhydrone
CMagnesium Silicate, ActivatedSee Florisil
CMagnesium StearateSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
Magne
245
MediaWare No: 205 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 246 2-DEC-05 10:36:54 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
0366Magnesium Sulfate Anhydrous’BAKER ANALYZED’
A MgSO4
M = 1 20.37 g/mol
CAS NO. 7487-88-9
EINECS 23 1 -298-2
NC CODE 2833 2 1 00
Assay (after ignition) min. 99.0%
Ammonium (NH4) max. 0.004%
Calcium (Ca) max. 0.06%
Chloride (Cl) max. 0.00 1%
Heavy Metals (as Pb) max. 0.00 1%
Iron (Fe) max. 0.00 1%
Loss on Ignition max. 2.0%
Manganese (Mn) max. 0.00 1%
Nitrate (NO3) max. 0.004%
Trace Impurities (in ppm):
Arsenic (As) max. 1
PRODUCT PACKING CONT.
NO. BOX
0366.0500 500 g 6
AMagnesium Sulfate AnhydrousSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
0168Magnesium Sulfate Heptahydrate’BAKER ANALYZED’ / ACS
A MgSO4.7H2O
M = 246.47 g/mol
CAS NO. 1 0034-99-8
EINECS 23 1 -298-2
NC CODE 2833 2 1 00
Exceeds ACS SpecificationsAssay (by EDTA titrn.) 99.0- 102.0%
Ammonium (NH4) max. 0.002%
Calcium (Ca) max. 0.02%
Insoluble Matter max. 0.005%
Nitrate (NO3) max. 0.002%
pH of 5% Solution at 25°C 5.0-7.0
Potassium (K) max. 0.005%
Sodium (Na) max. 0.005%
Strontium (Sr) max. 0.005%
Trace Impurities (in ppm):
Chloride (Cl) max. 5
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 5
Manganese (Mn) max. 5
PRODUCT PACKING CONT.
NO. BOX
0168.0500 500 g 6
0169Magnesium Sulfate Heptahydrate’BAKER’
A MgSO4.7H2O
M = 246.47 g/mol
CAS NO. 1 0034-99-8
EINECS 23 1 -298-2
NC CODE 2833 2 1 00
Assay (dried basis) 99.0- 100.5%
Acidity or Alkalinity passes test
Appearance of solution passes test
Arsenic (As) max. 2 ppm
Chlorides (as Cl) max. 300 ppm
Heavy Metals (as Pb) max. 10 ppm
Identification passes test
Iron (Fe) max. 20 ppm
Loss on Drying 48.0-52.0%
PRODUCT PACKING CONT.
NO. BOX
0169.5000 5 kg 4
0169.9050 50 kg
AMagnesium Sulfate, 7-HydrateSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
1325Malachite Green Oxalate’BAKER ANALYZED’
A C52H54N4O12
M = 927.00 g/mol
CAS NO. 2437-29-8
EINECS 2 19-44 1 -7
NC CODE 3204 13 00
UN/ID NO. 28 1 1
ADR/RID 6. 1 T2
IMDG 6. 1 /III
R: 2 1 /22
S: 24/25
4Xn
harmful
Appearance passes test PRODUCT PACKING CONT.
NO. BOX
1325.0100 100 g
C.I. 42000.
Certified Stain for Use in Histology and Bacteriology.
Magne
246
MediaWare No: 206 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 247 2-DEC-05 10:36:55 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
2790Maleic Acid’BAKER ANALYZED’
A HOCOCH:CHCOOH
M = 1 1 6.07 g/mol
CAS NO. 1 1 0- 16-7
EINECS 203-742-5
NC CODE 29 17 19 90
EC NO. 607 095 00 3
UN/ID NO. 326 1
ADR/RID 8 C4
IMDG 8/III
R: 22-36/37/38
S: 26-28-37
4Xn
harmful
Assay (acidimetric) min. 99.0%
Chloride (Cl) max. 0.002%
Heavy Metals (as Pb) max. 0.00 1%
Iron (Fe) max. 0.00 1%
Melting Point 132- 135°C
Residue after Ignition max. 0. 1%
Sulfate (SO4) max. 0.0 1%
PRODUCT PACKING CONT.
NO. BOX
2790.0500 500 g
1124Malonic Acid’BAKER ANALYZED’
A CH2(COOH)2
M = 1 04.06 g/mol
CAS NO. 1 4 1 -82-2
EINECS 205-503-0
NC CODE 29 17 19 10
R: 22-36
S: 22-24
4Xn
harmful
Assay min. 99.0%
Heavy Metals (as Pb) max. 0.00 1%
Iron (Fe) max. 0.005%
Melting Range 133- 134°C
Residue after Ignition max. 0.3%
PRODUCT PACKING CONT.
NO. BOX
1124.0100 100 g
5793Manganese 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Mn
M = 54.94 g/mol
NC CODE 3822 00 00
R: 36/37/38
S: 26-28-45
4Xi
irritant
Certificate Provided Reporting Actual Lot AnalysisManganese (Mn) 998- 1002 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5793.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within ± 0.2%. Typically 1000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
6933Manganese 1000 mg/ml0.10% (w/v) / (Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Atomic Absorption Standard
A Mn
M = 200.59 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26-37
4Xi
irritant
Manganese (Mn) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6933.0100 100 ml
6933.0500 500 ml
Prepared by dissolution of high purity raw materials (min.
99.99% spectral purity). Assays are verified by ICP against
standards traceable to NIST. Standard Reference Material
numbers (SRM) are printed on each label.
6816Manganese 1000 mg/ml’BAKER ANALYZED’ / Atomic Absorption Standard
A Mn
M = 54.94 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26-37
4Xi
irritant
Manganese (Mn) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6816.0100 100 ml
6816.0500 500 ml
Manganese(II)nitrate in nitric acid 0.5 mol/l.
Manga
247
MediaWare No: 207 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 248 2-DEC-05 10:36:55 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
5735Manganese 10000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Mn
M = 54.94 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26
4Xi
irritant
Certificate Provided Reporting Actual Lot AnalysisManganese (Mn) 9980- 10020 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5735.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within 0.2 %. Typically 10000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
0172Manganese(II) Carbonate’BAKER ANALYZED’
A MnCO3
M = 1 1 4.95 g/mol
CAS NO. 598-62-9
EINECS 209-942-9
NC CODE 2836 99 18
S: 22-24/25
Assay (as Mn) min. 43.0%
Average Particle Diameter, mm (APD) max. 3
Calcium (Ca) max. 0.0 1%
Chloride (Cl) max. 0.02%
Insoluble in HCl max. 0.0 1%
Iron (Fe) max. 0.02%
Magnesium (Mg) max. 0.0 1%
Other Heavy Metals (as Pb) max. 0.005%
Potassium (K) max. 0.0 1%
Sodium (Na) max. 0.02%
Sulfate (SO4) max. 0.005%
Zinc (Zn) max. 0.05%
PRODUCT PACKING CONT.
NO. BOX
0172.0500 500 g
0172.9012 12 kg
0173Manganese(II) Chloride Tetrahydrate’BAKER ANALYZED’ / ACS
A MnCl2.4H2O
M = 1 97.9 1 g/mol
CAS NO. 1 3446-34-9
EINECS 23 1 -869-6
NC CODE 2827 39 90
R: 22
S: 24
4Xn
harmful
Meets ACS SpecificationsAssay (by EDTA titrn.) 98.0- 10 1 .0%
Calcium (Ca) max. 0.005%
Insoluble Matter max. 0.005%
Magnesium (Mg) max. 0.005%
pH of 5% Solution at 25°C 3.5-6.0
Potassium (K) max. 0.0 1%
Sodium (Na) max. 0.05%
Sulfate (SO4) max. 0.005%
Zinc (Zn) max. 0.005%
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 5
PRODUCT PACKING CONT.
NO. BOX
0173.0500 500 g 6
AManganese DioxideSee Manganese(IV) Oxide
0170Manganese(IV) Oxide’BAKER ANALYZED’
A MnO2
M = 86.94 g/mol
CAS NO. 1 3 13- 13-9
EINECS 2 15-202-6
NC CODE 2820 10 00
EC NO. 25 00 1 00 3
R: 20/22
S: 25
4Xn
harmful
Assay (by EDTA titrn.) min. 99.0%
Chloride (Cl) max. 0.0 1%
Insoluble in HCl max. 0.03%
Iron (Fe) max. 0.05%
Nitrate (NO3) max. 0.05%
Sulfate (SO4) max. 0.08%
PRODUCT PACKING CONT.
NO. BOX
0170.1000 1 kg
Manga
248
MediaWare No: 208 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 249 2-DEC-05 10:36:56 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
0174Manganese(II) Sulfate Monohydrate’BAKER ANALYZED’ / ACS
A MnSO4.H2O
M = 1 69.0 1 g/mol
CAS NO. 1 0034-96-5
EINECS 232-089-9
NC CODE 2833 29 90
EC NO. 25 003 00 4
UN/ID NO. 3077
ADR/RID 9 M7
IMDG 9/III
R: 48/20/22-5 1 /53
S: 22-6 1
oN
dangerousfor theenvironment
4Xn
harmful
Exceeds ACS SpecificationsAssay 98.0- 10 1 .0%
Calcium (Ca) max. 0.005%
Chloride (Cl) max. 0.00 1%
Heavy Metals (as Pb) max. 0.002%
Insoluble Matter max. 0.0 1%
Iron (Fe) max. 0.00 1%
Loss on Ignition 10.0- 12.0%
Magnesium (Mg) max. 0.005%
Potassium (K) max. 0.005%
Sodium (Na) max. 0.005%
Zinc (Zn) max. 0.005%
Trace Impurities (in ppm):
Copper (Cu) max. 5
Nickel (Ni) max. 5
Substances Reducing KMnO4 max. 5
PRODUCT PACKING CONT.
NO. BOX
0174.1000 1 kg
1125Mannitol’BAKER ANALYZED’ / ACS
A HOCH2(CHOH)4CH2OH
M = 1 82. 17 g/mol
CAS NO. 69-65-8
EINECS 200-7 1 1 -8
NC CODE 2905 43 00
Meets ACS SpecificationsInsoluble Matter max. 0.0 1%
Loss on Drying at 105°C max. 0.05%
Reducing Sugars passes test
Residue after Ignition max. 0.0 1%
Specific Rotation [a] 25D +23.3° to +24.3°
Titrable Acid (meq/g) max. 0.0008
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 5
PRODUCT PACKING CONT.
NO. BOX
1125.0250 250 g
1125.1000 1 kg 6
1998Mannitol’BAKER’
A HOCH2(CHOH)4CH2OH
M = 1 82. 17 g/mol
CAS NO. 69-65-8
EINECS 200-7 1 1 -8
NC CODE 2905 43 00
Assay (dried basis) 96.0- 10 1 .5%
Acidity passes test
Arsenic (As) max. 1 ppm
Chloride (Cl) max. 0.007%
Identification passes test
Loss on Drying at 105°C max. 0.3%
Melting Range 164- 169°C
Reducing Sugars passes test
Specific rotation +137- +145°
Sulfate (SO4) max. 0.0 1%
PRODUCT PACKING CONT.
NO. BOX
1998.1000 1 kg 6
1998.9050 50 kg
CMannitolSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
CMarshall’s ReagentSee N-(1-Naphthyl) Ethylenediamine Dihydrochloride
3814May GrünwaldPowder / HEMATOLOGY/CYTOLOGY/HISTOLOGY
NC CODE 3204 12 00
R: 22-36
S: 22-26
4Xn
harmful
Non oxidized Methylene Blue/Eosine Y Stain,suitable for staining blood smears
PRODUCT PACKING CONT.
NO. BOX
3814.0025 25 g Glass
May
249
MediaWare No: 209 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 250 2-DEC-05 10:36:56 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
3855May GrünwaldHEMATOLOGY/CYTOLOGY/HISTOLOGY
1 l = 0.79 kg
FLASHPOINT 1 1 °C
NC CODE 3204 12 00
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39-39/23/24/25
S: 1 6-36/37/39-45
0F
highlyflammable
3T
toxic
May-Grünwalds Eosine-Methylene Blue Solutionmodified for Microscopy (contains Methanol)
PRODUCT PACKING CONT.
NO. BOX
3855.0100 100 ml Glass
3855.0500 500 ml Glass
3855.1000 1 l Glass
3855.2500 2.5 l Glass
3855.9020PE 20 L jerrycan
AMayer’s HematoxylineSee Hematoxyline
AMentholSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
Alevo-MentholSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
40492-Mercaptoethanol’BAKER ULTRAPURE BIOREAGENT’
A HSCH2CH2OH
M = 78. 13 g/mol
1 l = 1 . 1 1 kg
FLASHPOINT 74 °C
CAS NO. 60-24-2
EINECS 200-464-6
NC CODE 2930 90 70
UN/ID NO. 2966
ADR/RID 6. 1 T 1
IMDG 6. 1 /II
R: 22-24-34-5 1 /53
S: 26-28A-36/37/39-45-6 1
oN
dangerousfor theenvironment
3T
toxic
For Electrophoresis and other Molecular BiologyApplicationsAssay (by GC) min. 99.0%
Appearance passes test
DNase Activity none detected
Protease Activity none detected
RNase Activity none detected
Trace Impurities (in ppm):
Copper (Cu) max. 10
Iron (Fe) max. 5
Lead (Pb) max. 5
Zinc (Zn) max. 5
PRODUCT PACKING CONT.
NO. BOX
4049.0100 100 g
4049.0500 500 g
9006Mercury’BAKER ANALYZED’ / ACS
A Hg
M = 200.59 g/mol
CAS NO. 7439-97-6
EINECS 23 1 - 106-7
NC CODE 2805 40 90
EC NO. 80 00 1 00 0
UN/ID NO. 2809
ADR/RID 8 C9
IMDG 8/III
R: 23-33-50/53
S: 45-60-6 1 -7
oN
dangerousfor theenvironment
3T
toxic
Meets ACS SpecificationsAppearance passes test
Non-volatile Matter max. 5 ppm
PRODUCT PACKING CONT.
NO. BOX
9006.0500 500 g
9006.1000 1 kg
May
250
MediaWare No: 210 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 251 2-DEC-05 10:36:57 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
5768Mercury 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Hg
M = 200.59 g/mol
NC CODE 3822 00 00
EC NO. 7 004 00 1
R: 20/2 1 /22-33-36/38
S: 26-36/37
4Xn
harmful
Certificate Provided Reporting Actual Lot AnalysisMercury (Hg) 998- 1002 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5768.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within ± 0.2%. Typically 1000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
6934Mercury 1000 mg/ml0.10% (w/v) / (Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Atomic Absorption Standard
A Hg
M = 200.59 g/mol
NC CODE 3822 00 00
R: 20/2 1 /22-33-36/38
S: 26-36/37
4Xn
harmful
Mercury (Hg) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6934.0100 100 ml
6934.0500 500 ml
Prepared by dissolution of high purity raw materials (min.
99.99% spectral purity). Assays are verified by ICP against
standards traceable to NIST. Standard Reference Material
numbers (SRM) are printed on each label.
6817Mercury 1000 mg/ml’BAKER ANALYZED’ / Atomic Absorption Standard
A Hg
M = 200.59 g/mol
NC CODE 3822 00 00
R: 20/2 1 /22-33-36/38
S: 26-36/37
4Xn
harmful
Mercury (Hg) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6817.0100 100 ml
6817.0500 500 ml
Mercury(II)nitrate in nitric acid 0.5 mol/l.
5736Mercury 10000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Hg
M = 200.59 g/mol
NC CODE 3822 00 00
EC NO. 7 004 00 1
R: 23/24/25-33-36/38-52/53
S: 26-36/37-45
3T
toxic
Certificate Provided Reporting Actual Lot AnalysisMercury (Hg) 9980- 10020 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5736.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within 0.2 %. Typically 10000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
Mercu
251
MediaWare No: 211 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 252 2-DEC-05 10:36:57 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
1128Mercury(II) Acetate’BAKER ANALYZED’ / ACS
A Hg(CH3COO)2
M = 3 18.68 g/mol
CAS NO. 1 600-27-7
EINECS 2 16-49 1 - 1
NC CODE 29 15 29 00
EC NO. 80 004 00 7
UN/ID NO. 1 629
ADR/RID 6. 1 T5
IMDG 6. 1 /II
R: 26/27/28-33-50/53
S: 1 3-28-36-45-60-6 1
oN
dangerousfor theenvironment
3T+
very toxic
Meets ACS SpecificationsAssay min. 98.0%
Chloride (Cl) max. 0.005%
Insoluble Matter max. 0.0 1%
Iron (Fe) max. 0.00 1%
Mercurous Mercury (as Hg) max. 0.4%
Nitrate (NO3) max. 0.005%
Other Heavy Metals (as Pb) max. 0.002%
Residue after Reduction max. 0.02%
Sulfate (SO4) max. 0.005%
PRODUCT PACKING CONT.
NO. BOX
1128.0500 500 g
1131Mercury(II) Chloride’BAKER ANALYZED’ / ACS
A HgCl2M = 27 1 .50 g/mol
CAS NO. 7487-94-7
EINECS 23 1 -299-8
NC CODE 2827 39 80
EC NO. 80 0 10 00 0
UN/ID NO. 1 624
ADR/RID 6. 1 T5
IMDG 6. 1 /II
R: 28-34-48/24/25-50/53
S: 36/37/39-45-60-6 1
oN
dangerousfor theenvironment
3T+
very toxic
Meets ACS SpecificationsAssay min. 99.5%
Iron (Fe) max. 0.002%
Residue after Reduction max. 0.02%
Solution in Ethyl Ether passes test
PRODUCT PACKING CONT.
NO. BOX
1131.0100 100 g
1131.0500 500 g
1133Mercury(II) Iodide, Red’BAKER ANALYZED’ / ACS
A HgI2M = 454.40 g/mol
CAS NO. 7774-29-0
EINECS 23 1 -873-8
NC CODE 2827 60 00
EC NO. 80 002 00 6
UN/ID NO. 1 638
ADR/RID 6. 1 T5
IMDG 6. 1 /II
R: 26/27/28-33-50/53
S: 1 3-28-45-60-6 1
oN
dangerousfor theenvironment
3T+
very toxic
Meets ACS SpecificationsAssay min. 99.0%
Mercurous Mercury (as Hg) max. 0. 1%
Solubility in Potassium Iodide Solution passes test
Soluble Mercury Salts (as Hg) max. 0.05%
PRODUCT PACKING CONT.
NO. BOX
1133.0100 100 g
Mercu
252
MediaWare No: 212 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 253 2-DEC-05 10:36:58 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
1134Mercury(II) Nitrate Monohydrate’BAKER ANALYZED’
A Hg(NO3)2.H2O
M = 342.62 g/mol
CAS NO. 1 0045-94-0
EINECS 233- 152-3
NC CODE 2834 29 30
EC NO. 80 002 00 6
UN/ID NO. 1 625
ADR/RID 6. 1 T5
IMDG 6. 1 /II
R: 26/27/28-33-50/53
S: 1 3-28-45-60-6 1
oN
dangerousfor theenvironment
3T+
very toxic
Assay min. 99.0%
Chloride (Cl) max. 0.002%
Iron (Fe) max. 0.00 1%
Mercurous Mercury (as Hg) max. 0. 1%
Residue after Ignition max. 0.0 1%
Sulfate (SO4) max. 0.002%
PRODUCT PACKING CONT.
NO. BOX
1134.0100 100 g
7252Mercury (II) Nitrate0.05 mol/l / ’BAKER ANALYZED’
A Hg(NO3)2
M = 342.62 g/mol
1 l = 1 .00 kg
NC CODE 2834 29 30
UN/ID NO. 2024
ADR/RID 6. 1 T4
IMDG 6. 1 /II
R: 23/24/25-33-52/53
S: 26-36/37-45
3T
toxic
Titer (mol/l) 0.0495-0.0505 PRODUCT PACKING CONT.
NO. BOX
7252.1000 1 l
1136Mercury(II) Oxide, Red’BAKER ANALYZED’ / ACS
A HgO
M = 2 16.59 g/mol
CAS NO. 2 1908-53-2
EINECS 244-654-7
NC CODE 2825 90 50
EC NO. 80 002 00 6
UN/ID NO. 1 64 1
ADR/RID 6. 1 T5
IMDG 6. 1 /II
R: 26/27/28-33-50/53
S: 1 3-28-45-60-6 1
oN
dangerousfor theenvironment
3T+
very toxic
Meets ACS SpecificationsAssay min. 99.0%
Chloride (Cl) max. 0.025%
Insoluble in Dilute HCl max. 0.03%
Iron (Fe) max. 0.005%
Nitrogen Compounds (as N) max. 0.005%
Residue after Reduction max. 0.025%
Sulfate (SO4) max. 0.0 15%
PRODUCT PACKING CONT.
NO. BOX
1136.0100 100 g
Mercu
253
MediaWare No: 213 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 254 2-DEC-05 10:36:58 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
1140Mercury(II) Sulfate’BAKER ANALYZED’ / ACS
A HgSO4
M = 296.65 g/mol
CAS NO. 7783-35-9
EINECS 23 1 -992-5
NC CODE 2833 29 70
EC NO. 80 002 00 6
UN/ID NO. 1 645
ADR/RID 6. 1 T5
IMDG 6. 1 /II
R: 26/27/28-33-50/53
S: 1 3-28-45-60-6 1
oN
dangerousfor theenvironment
3T+
very toxic
Meets ACS SpecificationsAssay min. 99.0%
Chloride (Cl) max. 0.003%
Iron (Fe) max. 0.003%
Mercurous Mercury (as Hg) max. 0. 1 5%
Nitrate (NO3) max. 0.005%
Residue after Reduction max. 0.02%
Suitable for COD det. acc. NEN (max. 0.8 g
Hg(II)SO4/20 ml) passes test
PRODUCT PACKING CONT.
NO. BOX
1140.0100 100 g 6
1140.0500 500 g 6
7464Mercury(II) Sulfate200 g/l in dilute sulfuric acid / ’BAKER ANALYZED’ / for the COD determination according DIN 38409-H43
EINECS 23 1 -992-5
NC CODE 2833 29 70
UN/ID NO. 3289
ADR/RID 6. 1 TC3
IMDG 6. 1 /II
R: 26/27/28-33-36/38-5 1 /53
S: 28-29-36/37-45
oN
dangerousfor theenvironment
3T+
very toxic
PRODUCT PACKING CONT.
NO. BOX
7464.1000 1 l 6
7464.2500 2.5 l
Volumetric Solution, ready for use.
7135Mercury(II) Sulfate80 g/l in 0.020 mol/l K2Cr2O7 solution in sulfuric acid. / ’BAKER ANALYZED’ / For COD determination according DIN 38409-H41.
1 l = 1 . 1 9 kg
CAS NO. 7783-35-9
EINECS 23 1 -992-5
NC CODE 2833 29 70
UN/ID NO. 3289
ADR/RID 6. 1 TC3
IMDG 6. 1 /II
R: 26/27/28-33-35-43-45-46-5 1 /53
S: 26-28A-29-36/37/39-45-53
oN
dangerousfor theenvironment
3T+
very toxic
Identity (Hg+) passes test
Molarity (K2Cr2O7) (M) 0.0 198-0.0202
PRODUCT PACKING CONT.
NO. BOX
7135.1000 1 l 6
7135.2500 2.5 l 4
Volumetric Solution, ready for use.
7642Mercury(II) Sulfate80 g/l in 0.04 mol/l K2Cr2O7 solution in sulfuric acid / ’BAKER ANALYZED’ / for the COD determiniation according AFNOR NF T 90-101
1 l = 1 . 1 9 kg
CAS NO. 7783-35-9
NC CODE 2833 29 70
UN/ID NO. 3289
ADR/RID 6. 1 TC3
IMDG 6. 1 /II
R: 26/27/28-33-35-43-46-49-5 1 /53
S: 26-28-29-36/37/39-45-53-57
oN
dangerousfor theenvironment
3T+
very toxic
Molarity (M) 0.0396 - 0.0404 PRODUCT PACKING CONT.
NO. BOX
7642.1000 1 l 6
7642.2500 2.5 l 4
Mercury(II)Sulfate 80 g/l in Sulfuric acid / Potassium
dichromate 0.04 mol/l.
AMES Monohydrate, Free AcidSee 2-(N-Morpholino)-ethanesulfonic Acid Monohydrate
Mercu
254
MediaWare No: 214 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 255 2-DEC-05 10:36:59 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
CMetaphosphoric AcidSee meta-Phosphoric Acid
CMethanalSee Formaldehyde solution
CMethanoic AcidSee Formic Acid
9077Methanol’BAKER ULTRA RESI-ANALYZED’ / Absolute, suitable for Purge and Trap analysis
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/25
S: 1 6-24-45-7
0F
highlyflammable
3T
toxic
Assay (by GC) (corrected for water) min. 99.9%
Residue after Evaporation max. 1 ppm
Titrable Acid (meq/g) max. 0.0003
Titrable Base (meq/g) max. 0.000 1
Water (H2O) max. 0.08%
Volatile Organic Trace Analysis. Gas
Chromatography with Purge and Trap
Concentration. EPA Contract Required Quantitation
Limit-CRQL.:
Electroconductivity Detection, Below CRQL passes test
Photoionization Detection, Below CRQL passes test
PRODUCT PACKING CONT.
NO. BOX
9077.1000 1 l 6
9263Methanol’BAKER ULTRA RESI-ANALYZED’ / for Organic Residue Analysis
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/25
S: 1 6-24-45-7
0F
highlyflammable
3T
toxic
Assay (by GC) (corrected for water) min. 99.8%
Acetone max. 0.00 1%
Color (APHA) max. 10
Residue after Evaporation max. 1 ppm
Substances Darkened by H2SO4 passes test
Titrable Acid (meq/g) max.0.0003
Titrable Base (meq/g) max.0.000 1
Water (H2O) max. 0.08%
ECD Sensitive Impurities (as Heptachlor Epoxide):
Single Impurity Peak (pg/ml) max. 10
FID-Sensitive Impurities (as 2-Octanol):
Single Impurity Peak (ng/ml) max. 5
PRODUCT PACKING CONT.
NO. BOX
9263.1000 1 l 6
9263.2500 2.5 l 4
Metha
255
MediaWare No: 215 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 256 2-DEC-05 10:36:59 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
9822MethanolBAKER ANALYZED LC-MS Reagent
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
Certificate Provided Reporting Actual Lot AnalysisAssay (by GC) min. 99.8%
Residue after Evaporation max. 1 ppm
Water (H2O) max. 0.02%
LC-Gradient-Diode Array Detection (a.u.), test
solution is modified with 0.1% (v/v) formic acid:
at 235 nm max. 0.005
at 254 nm max. 0.00 1
LC-MS Gradient Suitability Test (TIC, 100 to 2000
m/z), test solution is modified with 0.1% (v/v)
formic acid:
Positive ESI-MS Sensitive Impurities (as
Reserpine) max. 50 ng/ml
Product Information (not specifications):
Density (g/ml) at 20°C 0.79
Trace Impurities (in ppb):
Aluminium (Al) max. 50
Calcium (Ca) max. 50
Iron (Fe) max. 50
Magnesium (Mg) max. 50
Sodium (Na) max. 50
Ultraviolet Absorbance (1.00-cm path vs water):
at 225 nm max. 0.20
at 254 nm max. 0.02
at 280 nm max. 0.0 1
PRODUCT PACKING CONT.
NO. BOX
9822.1000GL 1 l Glass 6
Element concentrations are at time of lot release.
8402Methanol’BAKER HPLC ANALYZED’ / HPLC Gradient Grade
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
Assay (by GC) (corrected for water) min. 99.8%
Acetone max. 0.00 1%
Residue after Evaporation (in ppm) max. 2
Titrable Acid (meq/g) max. 0.0003
Titrable Base (meq/g) max. 0.000 1
Water (H2O) max. 0.02%
Fluorescence Trace Impurities (as quinine base),
ppb:
Measured at 450 nm max. 0.3
Measured at Emission Maximum for
Solvent Impurities max. 1 .0
Gradient Elution Test Ultraviolet Absorbance (a.u.):
at 235 nm max. 0.005
at 254 nm max. 0.00 1
Ultraviolet Absorbance (1.00-cm path vs water):
at 225 nm max. 0. 17
at 280 nm max. 0.0 1
at 350 nm max. 0.0 1
UV Cut-off, nm max. 206
PRODUCT PACKING CONT.
NO. BOX
8402.1000 1 l 6
8402.2500 2.5 l 4
8402.5000 5 l EcoTainer 4
Filtered through a 0.2 micron filter.
Packaged under Nitrogen.
Metha
256
MediaWare No: 216 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 257 2-DEC-05 10:37:00 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
8404Methanol’BAKER HPLC ANALYZED’ / HPLC Isocratic Grade
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
Assay (by GC) min. 99.8%
Color (APHA) max. 10
Residue after Evaporation max. 5 ppm
Titrable Acid (meq/g) max. 0.0003
Titrable Base (meq/g) max. 0.0002
Water (H2O) max. 0.05%
Ultraviolet Absorbance (1.00-cm path vs water):
at 225 nm max. 0.30
at 240 nm max. 0. 10
at 265 nm max. 0.0 1
PRODUCT PACKING CONT.
NO. BOX
8404.1000 1 l 6
8404.2500 2.5 l 4
8404.5000 5 l EcoTainer 4
8404.9010RC 10 l Returnable Container
8404.9030RC 30 l Returnable Container
8404.9200RC 200 l Returnable Container
8046Methanol’BAKER ANALYZED’ / Ultraviolet Spectrophotometry / ACS
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
Exceeds ACS SpecificationsAssay (by GC) min. 99.8%
Appearance clear
Carbonyl Compounds passes test
Color (APHA) max. 10
Residue after Evaporation max. 5 ppm
Solubility in Water passes test
Substances Darkened by H2SO4 passes test
Substances Reducing KMnO4 passes test
Titrable Acid (meq/g) max. 0.0003
Titrable Base (meq/g) max. 0.0002
Water (H2O) max. 0. 1 0%
Ultraviolet Absorbance (1.00-cm path vs water):
at 205 nm max. 1 .00
at 2 10 nm max. 0.80
at 220 nm max. 0.40
at 230 nm max. 0.20
at 240 nm max. 0. 10
at 260 nm max. 0.04
at 280-400 nm max. 0.0 1
PRODUCT PACKING CONT.
NO. BOX
8046.1000 1 l 6
8046.2500 2.5 l 4
9097MethanolBakerDRY / Low Water Solvent / ACS
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
Meets ACS SpecificationsAssay (CH3OH)(by GC,corrected for water) min. 99.8%
Appearance passes test
Color (APHA) max. 10
Residue after Evaporation max. 1 ppm
Solubility in Water passes test
Substances Darkened by H2SO4 passes test
Substances Reducing Permanganate passes test
Titrable Acid (meq/g) max. 0.3
Titrable base (meq/g) max. 0.2
Water (by KF, coulometric) max. 30 ppm
Carbonyl Compounds:
Acetaldehyde max. 0.00 1%
Acetone max. 0.00 1%
Formaldehyde (HCHO) max. 0.00 1%
PRODUCT PACKING CONT.
NO. BOX
9097.1000 1 l
Metha
257
MediaWare No: 217 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 258 2-DEC-05 10:37:00 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
9091Methanol’BAKER BIO-ANALYZED’ / For Biotechnology Applications
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
Assay (CH3OH)(by GC,corrected for water) min. 99.8%
Acetone max. 0.00 1%
Residue after Evaporation max. 2.0 ppm
Titrable Acid (meq/g) max. 0.0003
Titrable Base (meq/g) max. 0.000 1
Water (by KF, coulometric) max. 0.005%
Gradient Elution Test (a.u.):
at 254 nm max. 0.005
Physical Data (not specifications):
Density (g/ml) at 20°C 0.79 1
Ultraviolet Absorbance (1.00-cm path vs water):
at 225 nm max. 0. 15
at 254-400 nm max. 0.0 1
UV Cut-off, nm max. 205
PRODUCT PACKING CONT.
NO. BOX
9091.4000GL 4 l Glass
9049Methanolmax. 0.01% H2O / ’BAKER ANALYZED’ / Dried / ACS
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
Exceeds ACS SpecificationsAssay min. 99.8%
Appearance clear
Carbonyl Compounds passes test
Color (APHA) max. 10
Residue after Evaporation max. 0.00 1%
Solubility in Water passes test
Substances Darkened by H2SO4 passes test
Substances Reducing KMnO4 passes test
Titrable Acid (meq/g) max. 0.0003
Titrable Base (meq/g) max. 0.0002
Water (H2O) max. 0.0 1%
Trace Impurities (in ppm):
Aluminium (Al) max. 0.5
Barium (Ba) max. 0. 1
Boron (B) max. 0.02
Cadmium (Cd) max. 0.05
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0.02
Cobalt (Co) max. 0.02
Copper (Cu) max. 0.02
Iron (Fe) max. 0. 1
Lead (Pb) max. 0. 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.02
Nickel (Ni) max. 0.02
Tin (Sn) max. 0. 1
Zinc (Zn) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
9049.1000 1 l 6
9049.1000S 1 l EcoTainer
9049.2500 2.5 l 4
EcoTainer, the metal solvent can for more safety in the lab.
Metha
258
MediaWare No: 218 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 259 2-DEC-05 10:37:01 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
8045Methanol’BAKER ANALYZED’ / ACS
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
Exceeds ACS SpecificationsAssay min. 99.8%
Appearance clear
Carbonyl Compounds passes test
Color (APHA) max. 10
Residue after Evaporation max. 0.00 1%
Resistivity (megaohm-cm) min. 0. 1
Solubility in Water passes test
Substances Darkened by H2SO4 passes test
Substances Reducing KMnO4 passes test
Titrable Acid (meq/g) max. 0.0003
Titrable Base (meq/g) max. 0.0002
Water (H2O) max. 0.05%
Trace Impurities (in ppm):
Aluminium (Al) max. 0.5
Barium (Ba) max. 0. 1
Boron (B) max. 0.02
Cadmium (Cd) max. 0.05
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0.02
Cobalt (Co) max. 0.02
Copper (Cu) max. 0.02
Iron (Fe) max. 0. 1
Lead (Pb) max. 0. 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.02
Nickel (Ni) max. 0.02
Tin (Sn) max. 0. 1
Zinc (Zn) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
8045.1000 1 l 6
8045.2500 2.5 l 4
8045.2500PE 2.5 l HDPE 4
8045.5000 5 l EcoTainer 4
8045.9010RC 10 l Returnable Container
8045.9025 25 l 4
8045.9030RC 30 l Returnable Container
8045.9200 200 l
EcoTainer, the metal solvent can for more safety in the lab.
For safe handling of 25 l tin cans, see Self-closing tap.
2685Methanol’BAKER ANALYZED’ / ACS, PhEur
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
Exceeds ACS Specifications. Meets Ph.Eur.Reagent SpecificationsA.C.S. Specification(s):
Appearance clear
Assay min. 99.8%
Carbonyl Compounds passes test
Color (APHA) max. 10
Residue after Evaporation max. 0.00 1%
Resistivity (megaohm-cm) min. 0. 1
Solubility in Water passes test
Substances Darkened by H2SO4 passes test
Substances Reducing KMnO4 passes test
Titrable Acid (meq/g) max. 0.0003
Titrable Base (meq/g) max. 0.0002
Water (H2O) max. 0.05%
Ph. Eur. Reagent Specification(s):
Acetone, Aldehydes (as Acetone) max. 0.00 1%
Appearance passes test
PRODUCT PACKING CONT.
NO. BOX
2685.9200ST 200 l Steel Drum
Metha
259
MediaWare No: 219 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 260 2-DEC-05 10:37:01 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
8047Methanol’BAKER’
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
Assay min. 99.5%
Acetone, Aldehydes (as Acetone) max. 0.002%
Boiling Range (initial to dry point) max. 2°C
Residue after Evaporation max. 0.002%
Titrable Acid (meq/g) max. 0.0003
Titrable Base (meq/g) max. 0.0002
Water (H2O) max. 0. 1%
PRODUCT PACKING CONT.
NO. BOX
8047.1000 1 l
8047.2500 2.5 l 4
8047.5000 5 l EcoTainer
8047.9025 25 l 4
8047.9200 200 l
EcoTainer, the metal solvent can for more safety in the lab.
For safe handling of 25 l tin cans, see Self-closing tap.
3400Methanol99.5% / HISTO GRADE
A CH3OH
M = 32.04 g/mol
1 l = 0.79 kg
FLASHPOINT 1 1 °C
CAS NO. 67-56- 1
EINECS 200-659-6
NC CODE 2905 1 1 00
EC NO. 603 00 1 00 0
UN/ID NO. 1 230
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7
0F
highlyflammable
3T
toxic
PRODUCT PACKING CONT.
NO. BOX
3400.0500PE 500 ml HDPE
3400.5000 5 l Jerrycan
3400.9010 10 l Jerrycan
3400.9025 25 l Jerrycan
Histo-Grade implicates that this reagent is specially tested
and therefore solely intended for use in histo-pathology
applications. This reagent is of an analytical quality.
AMethanolSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
AMethanol MOS, VLSI, ULSI GradeSee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
AMethenamineSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
AL-MethionineSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
AMethotrexateSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
AMethoxybenzeneSee Anisole
Metha
260
Reagents for DNA/RNA synthesis
Major fields of application for reagents:
• Biotechnology
We offer a complete range:
• Synthesis reagents
• DNA/RNA purifi cation and analysis
Synthesis reagents available
for the following DNA/RNA Synthesisers:
• ABI series 390Z, 392, 394, 3900 and 3948
• Milligen – Biosearch System 8800
• Expedite 8905 and 8909
We offer a complete range of
synthesis solvents and reagents:
• Acetonitrile
(<30 ppm bottles; <10 ppm CYCLE-TAINER System)
• Dichloromethane (< 30 ppm)
• Deblock
• Activator: besides 1H-Tetrazole we have available
5-Ethylthio-1H-tetrazole (ETT) and
4,5-Dicyanoimidazole (DCI)
• Capping A
• Capping B
• Oxidising
Reagents for DNA/RNA purification and analysis
• HPLC Solvents and reagents
• BAKERBOND spe
• BAKERBOND Speedisk
The critical flushing solvent: Acetonitrile
Product Name Description Product Code Content
Acetonitrile Acetonitrile low water in CYCLE-TAINER (< 10 ppm) 8134 20, 50, 200, 1400 L
Acetonitrile Acetonitrile low water in bottles (< 30 ppm) 8144 2,5 and 4 L
261
MediaWare No: 221 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 262 2-DEC-05 10:37:01 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
80842-Methoxyethanol’BAKER ANALYZED’
A CH3OCH2CH2OH
M = 76. 10 g/mol
1 l = 0.96 kg
FLASHPOINT 39 °C
CAS NO. 1 09-86-4
EINECS 203-7 13-7
NC CODE 2909 42 00
EC NO. 603 0 1 1 00 4
UN/ID NO. 1 1 88
ADR/RID 3 F 1
IMDG 3/III
R: 1 0-20/2 1 /22-60-6 1
S: 45-53
3T
toxic
Assay (by GC) min. 98%
Boiling Range 123- 125°C
Color (APHA) max. 10
Density (g/ml) at 20°C 0.964-0.966
Peroxide passes test
Residue after Evaporation max. 0.002%
Water (H2O) max. 0.2%
Trace Impurities (in ppm):
Aluminium (Al) max. 0.5
Barium (Ba) max. 0. 1
Boron (B) max. 0.02
Cadmium (Cd) max. 0.05
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0.02
Cobalt (Co) max. 0.02
Copper (Cu) max. 0.02
Iron (Fe) max. 0. 1
Lead (Pb) max. 0.2
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.02
Nickel (Ni) max. 0.02
Tin (Sn) max. 0. 1
Zinc (Zn) max. 1 .0
PRODUCT PACKING CONT.
NO. BOX
8084.1000 1 l 6
8084.9025 25 l
For safe handling of 25 l tin cans, see Self-closing tap.
AMethyl AlcoholSee Methanol
AMethyl AlcoholSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
2794p-(Methylamino)phenol Sulfate’BAKER ANALYZED’ / ACS
A (CH3NHC6H4OH)2.H2SO4
M = 344.39 g/mol
CAS NO. 55-55-0
EINECS 200-237- 1
NC CODE 2922 29 00
EC NO. 650 03 1 00 4
UN/ID NO. 3077
ADR/RID 9 M7
IMDG 9/III
R: 22-43-48/22-50/53
S: 36/37-46-60-6 1
oN
dangerousfor theenvironment
4Xn
harmful
Meets ACS SpecificationsAssay 99.0- 10 1 .5%
Residue after Ignition max. 0. 1%
Suitability for Phopshate Determination passes test
PRODUCT PACKING CONT.
NO. BOX
2794.0500 500 g
8123Methyl Benzoate’BAKER’
A C6H5COOCH3
M = 1 36. 15 g/mol
1 l = 1 .09 kg
FLASHPOINT 83 °C
CAS NO. 93-58-3
EINECS 202-259-7
NC CODE 29 16 3 1 00
R: 22
S: 23-24/25
4Xn
harmful
Assay (by GC) min. 99%
Acidity (as C6H5COOH) passes test
Boiling Range 197-200°C
PRODUCT PACKING CONT.
NO. BOX
8123.1000 1 l
Metho
262
MediaWare No: 222 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 263 2-DEC-05 10:37:02 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
81132-Methylbutane’BAKER’
A CH3CH2CH(CH3)2
M = 72. 15 g/mol
1 l = 0.62 kg
FLASHPOINT −55 °C
CAS NO. 78-78-4
EINECS 20 1 - 142-8
NC CODE 290 1 10 00
EC NO. 60 1 006 00 1
UN/ID NO. 1 265
ADR/RID 3 F 1
IMDG 3/I
R: 1 2-5 1 /53-65-66-67
S: 1 6-29-33-6 1 -62-9
oN
dangerousfor theenvironment
0F+
extremelyflammable
4Xn
harmful
Assay (by GC) min. 99%
Boiling Point 27.5-28.5°C
Residue after Evaporation max. 0.005%
PRODUCT PACKING CONT.
NO. BOX
8113.1000 1 l 6
8113.9025 25 l
For safe handling of 25 l tin cans, see Self-closing tap.
C3-Methyl-1-butanolSee Isoamyl Alcohol
9043Methyl tert-Butyl Ether’BAKER ULTRA RESI-ANALYZED’ / for Organic Residue Analysis
A (CH3)COCH3
M = 88. 15 g/mol
1 l = 0.74 kg
FLASHPOINT −28 °C
CAS NO. 1 634-04-4
EINECS 2 16-653- 1
NC CODE 2909 19 00
UN/ID NO. 2398
ADR/RID 3 F 1
IMDG 3/II
R: 1 2
S: 1 6-29-33-9
0F+
extremelyflammable
Assay (corrected for H2O) min. 99.0%
Peroxide (as H2O2) (in ppm) max. 1 ppm
Residue after Evaporation (in ppm) max. 2 ppm
Water (H2O) max. 0.05%
ECD Sensitive Impurities (as Heptachlor Epoxide):
Single Impurities (pg/ml) max. 10
FID-Sensitive Impurities (as 2-Octanol):
Single Impurity Peak (ng/ml) max. 10
PRODUCT PACKING CONT.
NO. BOX
9043.1000 1 l
9043.4000 4 l Glass
9042Methyl tert-Butyl Ether’BAKER HPLC ANALYZED’ / for use in High Performance Liquid Chromatography
A (CH3)3COCH3
M = 88. 15 g/mol
1 l = 0.74 kg
FLASHPOINT −28 °C
CAS NO. 1 634-04-4
EINECS 2 16-653- 1
NC CODE 2909 19 00
UN/ID NO. 2398
ADR/RID 3 F 1
IMDG 3/II
R: 1 2
S: 1 6-29-33-43A-9
0F+
extremelyflammable
Assay min. 99.0%
Fluorescence Trace Impurities (as quinine base),
ppb:
Measured at 450 nm value on certificate
Measured at Emission Maximum value on certificate
Maximum Limits of Impurities:
Peroxide (as H2O2) 1 ppm
Residue after Evaporation 3 ppm
Water (H2O) 0.05%
Product Information (not specifications):
Density (g/ml) at 20°C 0.740
Ultraviolet Absorbance (1.00-cm path vs water):
at 254 nm max. 0. 1
at 280 nm max. 0.02
at 350 nm max. 0.0 1
UV Cut-off, nm max. 2 15
PRODUCT PACKING CONT.
NO. BOX
9042.1000 1 l 6
9042.2500 2.5 l 4
9042.5000 5 l EcoTainer
EcoTainer, the metal solvent can for more safety in the lab.
Packaged under Nitrogen.
CMethyl CyanideSee Acetonitrile
Methy
263
MediaWare No: 223 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 264 2-DEC-05 10:37:02 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
8050Methylcyclohexane’BAKER ANALYZED’
A CH3CH(CH2)4CH2
M = 98. 19 g/mol
1 l = 0.77 kg
FLASHPOINT −4 °C
CAS NO. 1 08-87-2
EINECS 203-624-3
NC CODE 2902 19 80
EC NO. 60 1 0 18 00 7
UN/ID NO. 2296
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -38-5 1 /53-65-67
S: 1 6-33-6 1 -62-9
oN
dangerousfor theenvironment
4Xn
harmful0
F
highlyflammable
Assay (by GC) min. 99%
Identification (by IR) passes test
Residue after Evaporation max. 0.00 1%
Product Information (not specifications):
Boiling Point (typical) 1 0 1 .0°C
Density (g/ml) at 25°C (typical) 0.765
PRODUCT PACKING CONT.
NO. BOX
8050.0500 500 ml
A4-Methyl-1,3-dioxolan-2-oneSee Propylene Carbonate
4031N,N’-Methylenbisacrylamide’BAKER ULTRAPURE BIOREAGENT’
A CH2(NHCOCH:CH2)2
M = 1 54.20 g/mol
CAS NO. 1 1 0-26-9
EINECS 203-750-9
NC CODE 2924 19 00
R: 22
4Xn
harmful
Crosslinking Agent for Polyacrylamide GelsAssay min. 99.5%
Acrylic acid (CH2:CHCOOH) max. 0.0 1%
Conductivity of 2% Solution (mmho) max. 10
DNAase none detected
pH of 1% Solution at 25°C min. 5.3
Protease none detected
RNAase none detected
Absorbance of a 1% Solution (1-cm path vs water):
at 290 nm max. 0.2
PRODUCT PACKING CONT.
NO. BOX
4031.0025 25 g Glass
4031.0100 100 g
1329Methylene Blue’BAKER ANALYZED’
A C16H18CIN3S.nH2O
M = 3 19.86 g/mol
CAS NO. 6 1 -73-4
EINECS 200-5 15-2
NC CODE 2934 30 90
R: 22
S: 22-24/25
4Xn
harmful
Appearance passes test
Solubility passes test
Zinc (Zn) passes test
PRODUCT PACKING CONT.
NO. BOX
1329.0025 25 g Glass 6
1329.0100GL 100 g Glass
AMethylenechlorideSee Dichloromethane
Methy
264
MediaWare No: 224 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 265 2-DEC-05 10:37:03 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
9214Methyl Ethyl Ketone’BAKER HPLC ANALYZED’ / for use in High Performance Liquid Chromatography
A CH3CH2COCH3
M = 72. 1 1 g/mol
1 l = 0.80 kg
FLASHPOINT −1 °C
CAS NO. 78-93-3
EINECS 20 1 - 159-0
NC CODE 29 14 12 00
EC NO. 606 002 00 3
UN/ID NO. 1 1 93
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -36-66-67
S: 1 6-9
0F
highlyflammable
4Xi
irritant
Assay (by GC) min. 99.5%
Residue after Evaporation (in ppm) max. 3
Water (H2O) max. 0.03%
Fluorescence Trace Impurities (as quinine base),
ppb:
Measured at 450 nm information only
Measured at Emission Maximum for
Solvent Impurities information only
Physical Data (not specifications):
Density (g/ml) at 20°C 0.805
Ultraviolet Absorbance (1.00-cm path vs water):
at 340 nm max. 0.07
at 350 nm max. 0.0 1
at 362 nm max. 0.0 1
UV Cut-off, nm max. 330
PRODUCT PACKING CONT.
NO. BOX
9214.2500 2.5 l
Filtered through a 0.2 micron filter.
Packaged under Nitrogen.
8052Methyl Ethyl Ketone’BAKER ANALYZED’
A CH3CH2COCH3
M = 72. 1 1 g/mol
1 l = 0.80 kg
FLASHPOINT −1 °C
CAS NO. 78-93-3
EINECS 20 1 - 159-0
NC CODE 29 14 12 00
EC NO. 606 002 00 3
UN/ID NO. 1 1 93
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -36-66-67
S: 1 6-9
0F
highlyflammable
4Xi
irritant
Assay (by GC) min. 99%
Acidity (as CH3COOH) max. 0.003%
Boiling Range max. 1 .5°C
Density (g/ml) at 25°C 0.797-080 1
Recorded Boiling Point 79.6°C
Residue after Evaporation max. 0.00 1%
Water (H2O) max. 0.2%
Trace Impurities (in ppm):
Aluminium (Al) max. 0.5
Barium (Ba) max. 0. 1
Boron (B) max. 0.02
Cadmium (Cd) max. 0.05
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0.02
Cobalt (Co) max. 0.02
Copper (Cu) max. 0.02
Iron (Fe) max. 0. 1
Lead (Pb) max. 0. 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.02
Nickel (Ni) max. 0.02
Tin (Sn) max. 0. 1
Zinc (Zn) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
8052.1000 1 l 6
8052.2500 2.5 l 4
8052.9025 25 l
8052.9200 200 l
For safe handling of 25 l tin cans, see Self-closing tap.
8053Methyl Ethyl Ketone’BAKER’
A CH3CH2COCH3
M = 72. 1 1 g/mol
1 l = 0.80 kg
FLASHPOINT −1 °C
CAS NO. 78-93-3
EINECS 20 1 - 159-0
NC CODE 29 14 12 00
EC NO. 606 002 00 3
UN/ID NO. 1 1 93
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -36-66-67
S: 1 6-9
0F
highlyflammable
4Xi
irritant
Acidity (as CH3COOH) max. 0.005%
Boiling Range max. 2°C
Density (g/ml) at 25°C 0.797-0.80 1
Residue after Evaporation max. 0.005%
PRODUCT PACKING CONT.
NO. BOX
8053.1000 1 l 6
8053.2500 2.5 l
8053.9025 25 l
8053.9200 200 l
For safe handling of 25 l tin cans, see Self-closing tap.
CMethyl Ethyl Ketone MOS, VLSI GradeSee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
Methy
265
MediaWare No: 225 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 266 2-DEC-05 10:37:03 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
4855Methyl Isobutyl KetoneULTREX Ultrapure Reagent / for Trace Metal Analysis
A CH3COCH2CH(CH3)2
M = 1 00. 16 g/mol
1 l = 0.80 kg
FLASHPOINT 1 7 °C
CAS NO. 1 08- 10- 1
EINECS 203-550- 1
NC CODE 29 14 13 00
EC NO. 606 004 00 4
UN/ID NO. 1 245
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -20-36/37-66
S: 1 6-29-9
4Xn
harmful0
F
highlyflammable
Certificate Provided Reports Actual Lot AnalysisAssay (by GC) (corrected for water) 99.0- 100.0%
Density (g/ml) at 25°C act. value reported
Residue after Evaporation act. value reported
Titrable Acid (meq/g) act. value reported
Water (H2O) act. value reported
Metallic Impurities (in ppb)(ng/g):
Bismuth (Bi) max. 1
Cadmium (Cd) max. 1
Chromium (Cr) max. 2
Cobalt (Co) max. 2
Copper (Cu) max. 1
Gallium (Ga) max. 1
Iron (Fe) max. 2
Lead (Pb) max. 1
Manganese (Mn) max. 1
Mercury (Hg) max. 5
Molybdenum (Mo) max. 1
Nickel (Ni) max. 1
Silver (Ag) max. 1
Thallium (Tl) max. 1
Tin (Sn) max. 1
Vanadium (V) max. 1
Zinc (Zn) max. 10
Zirconium (Zr) max. 1
Ultraviolet Absorbance (1.00-cm path vs water;
curve smooth throughout stated range with no
extraneous impurity peaks):
at 335 nm act. value reported
at 340 nm act. value reported
at 350 nm act. value reported
at 360 nm act. value reported
at 380 nm act. value reported
at 400 nm act. value reported
Windows of Infrared Transmittance (0.1-mm path,
50-100% T), mm:
2.5-2.9 passes test
3.6-5.5 passes test
6.2-6.4 passes test
9.2-9.9 passes test
10.9- 1 1 .7 passes test
12.0- 15.0 passes test
PRODUCT PACKING CONT.
NO. BOX
4855.1000 1 l
Methy
266
MediaWare No: 226 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 267 2-DEC-05 10:37:04 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
8224Methyl Isobutyl KetonePHOTREX Reagent / For Spectrophotometry / ACS
A CH3COCH2CH(CH3)2
M = 1 00. 16 g/mol
1 l = 0.80 kg
FLASHPOINT 1 7 °C
CAS NO. 1 08- 10- 1
EINECS 203-550- 1
NC CODE 29 14 13 00
EC NO. 606 004 00 4
UN/ID NO. 1 245
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -20-36/37-66
S: 1 6-29-9
4Xn
harmful0
F
highlyflammable
Meets ACS SpecificationsAssay (by GC) (corrected for water) min. 98.5%
Appearance passes test
Color (APHA) max. 10
Residue after Evaporation max. 0.00 1%
Titrable Acid (meq/g) max. 0.002
Water (H2O) max. 0.05%
Product Information (not specifications):
Boiling Point (typical) 1 1 5.5°C
Density (g/ml) at 25°C (typical) 0.796
Ultraviolet Absorbance (1.00-cm path vs water):
at 335 nm max. 1 .00
at 340 nm max. 0.50
at 350 nm max. 0.25
at 360 nm max. 0. 15
at 380 nm max. 0.02
at 400 nm max. 0.0 1
Windows of Infrared Transmittance (0.1-mm path,
50-100% T), mm:
2.5-3.2 passes test
3.6-5.5 passes test
6.2-6.4 passes test
9.2-9.9 passes test
10.9- 1 1 .7 passes test
12.0- 15.0 passes test
PRODUCT PACKING CONT.
NO. BOX
8224.0500 500 ml
8049Methyl Isobutyl Ketone’BAKER ANALYZED’ / ACS
A CH3COCH2CH(CH3)2
M = 1 00. 16 g/mol
1 l = 0.80 kg
FLASHPOINT 1 7 °C
CAS NO. 1 08- 10- 1
EINECS 203-550- 1
NC CODE 29 14 13 00
EC NO. 606 004 00 4
UN/ID NO. 1 245
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -20-36/37-66
S: 1 6-29-9
4Xn
harmful0
F
highlyflammable
Exceeds ACS SpecificationsAssay (by GC) min. 99%
Appearance clear
Color (APHA) max. 15
Residue after Evaporation max. 0.002%
Titrable Acid (meq/g) max. 0.002
Water (H2O) max. 0. 1%
Trace Impurities (in ppm):
Aluminium (Al) max. 0.5
Barium (Ba) max. 0. 1
Boron (B) max. 0.02
Cadmium (Cd) max. 0.05
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0.02
Cobalt (Co) max. 0.02
Copper (Cu) max. 0.02
Iron (Fe) max. 0. 1
Lead (Pb) max. 0. 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.02
Nickel (Ni) max. 0.02
Tin (Sn) max. 0. 1
Zinc (Zn) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
8049.1000 1 l 6
8049.2500 2.5 l 4
8049.5000 5 l EcoTainer
8049.9025 25 l
8049.9200 200 l
EcoTainer, the metal solvent can for more safety in the lab.
For safe handling of 25 l tin cans, see Self-closing tap.
CMethyl Isobutyl Ketone MOS, VLSI GradeSee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
7136Methyl Orange0.1% in H2O / ’BAKER ANALYZED’
NC CODE 3204 13 00 Visual Transition Interval:
pH 3.2 pink or red
pH 4.4 yellow
PRODUCT PACKING CONT.
NO. BOX
7136.0250 250 ml
7136.1000 1 l
Solution, ready for use.
Methy
267
MediaWare No: 227 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 268 2-DEC-05 10:37:04 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
1145Methyl Orange Sodium Salt’BAKER ANALYZED’ / ACS
A 4-(CH3)2NC6H4N:NC6H4-4-SO3Na
M = 327.34 g/mol
CAS NO. 547-58-0
EINECS 208-925-3
NC CODE 2927 00 00
UN/ID NO. 3 143
ADR/RID 6. 1 T2
IMDG 6. 1 /III
R: 25
S: 22-24/25-45
3T
toxic
Meets ACS SpecificationsClarity of Solution passes test
Visual Transition Interval:
pH 3.2 pink or red
pH 4.4 yellow
PRODUCT PACKING CONT.
NO. BOX
1145.0100 100 g
C.I. 1 3025.
AMethyloxiraneSee Propylene Oxide
AMethylparabenSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
A4-Methyl-2-pentanoneSee Methyl Isobutyl Ketone
AMethyl Phenyl EtherSee Anisole
A2-Methyl-1-propanolSee Isobutyl Alcohol
92611-Methyl-2-pyrrolidone’BAKER BIO-ANALYZED’
A C5H9NO
M = 99. 13 g/mol
1 l = 1 .03 kg
FLASHPOINT 95 °C
CAS NO. 872-50-4
EINECS 2 12-828- 1
NC CODE 2933 79 00
EC NO. 606 02 1 00 7
R: 36/38
S: 4 1
4Xi
irritant
Assay (C5H9NO) min. 99.5%
Color (APHA) max. 20
Free Amines (as CH3NH2) max. 0.0 1%
Heavy Metals (as Pb) max. 0. 1 ppm
Residue after Ignition max. 10 ppm
Water (H2O) max. 200 ppm
Ultraviolet Absorbance (1.00-cm path vs water):
at 300 nm max. 0.5
at 325 nm max. 0. 1
at 350 nm max. 0.03
at 400 nm max. 0.0 1
UV Cut-off, nm max. 285
PRODUCT PACKING CONT.
NO. BOX
9261.4000GL 4 l Glass
93451-Methyl-2-pyrrolidone’BAKER ANALYZED’ / For peptide synthesis
A C5H9NO
M = 99. 13 g/mol
1 l = 1 .03 kg
FLASHPOINT 95 °C
CAS NO. 872-50-4
EINECS 2 12-828- 1
NC CODE 2933 79 00
EC NO. 606 02 1 00 7
R: 36/38
S: 4 1
4Xi
irritant
Assay min. 99.5%
Color (APHA) max. 20
Free Amines (as CH3NH2) max. 0.0 1%
Water (H2O) max. 200 ppm
PRODUCT PACKING CONT.
NO. BOX
9345.4000GL 4 l Glass
A1-Methyl-2-Pyrrolidone (NMP) CMOS, Finyte GradeSee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
Methy
268
MediaWare No: 228 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 269 2-DEC-05 10:37:05 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
1146Methyl Red’BAKER ANALYZED’
A (CH3)2NC6H4N:NC6H4COOH
M = 269.3 1 g/mol
CAS NO. 493-52-7
EINECS 207-776- 1
NC CODE 2927 00 00
Insoluble Matter in Alcohol passes test
Visual Transition Interval:
pH 4.2 pink
pH 6.2 yellow
PRODUCT PACKING CONT.
NO. BOX
1146.0025 25 g Glass
C.I. 1 3020.
7137Methyl Red0.1% in ethanol / ’BAKER ANALYZED’
1 l = 0.80 kg
FLASHPOINT 1 1 °C
NC CODE 2927 00 00
UN/ID NO. 1 1 70
ADR/RID 3 F 1
IMDG 3/II
R: 1 1
S: 1 6-7/9
0F
highlyflammable
Visual Transition Interval:
pH 4.2 pink
pH 6.2 yellow
PRODUCT PACKING CONT.
NO. BOX
7137.0250 250 ml
Excluding excise.
Solution, ready for use.
CMethyl SalicylateSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
CMethylsulfoxideSee Dimethyl Sulfoxide
CMetolSee p-(Methylamino)phenol Sulfate
CMineral OilSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
6003-01Mixed Calibration Standard III(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
NC CODE 3822 00 00
R: 36/38
S: 26-37
4Xi
irritant
Elemental Concent (mg/ml):
Arsenic (As) 500
Molybdenum (Mo) 100
Silicon (Si) 1 00
PRODUCT PACKING CONT.
NO. BOX
6003-01 100 ml
For use in EPA SW-846 Methods 60 10 and 200.7.
Traceable to NIST.
6004-01Mixed Calibration Standard IV(Matrix: 5% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
NC CODE 3822 00 00
UN/ID NO. 3264
ADR/RID 8 C1
IMDG 8/III
R: 34
S: 23-26-36/37/39-45
1C
corrosive
Elemental Concent (mg/ml):
Aluminium (Al) 200
Calcium (Ca) 1000
Chromium (Cr) 20
Nickel (Ni) 20
Potassium (K) 400
Sodium (Na) 200
PRODUCT PACKING CONT.
NO. BOX
6004-01 100 ml
For use in EPA SW-846 Methods 60 10 and 200.7.
Traceable to NIST.
Mixed
269
MediaWare No: 229 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 270 2-DEC-05 10:37:05 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
6005-01Mixed Calibration Standard VMatrix: 5% HNO3 and a trace of tartaric acid / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
NC CODE 3822 00 00
UN/ID NO. 3264
ADR/RID 8 C1
IMDG 8/III
R: 34
S: 23-26-36/37/39-45
1C
corrosive
Elemental Concent (mg/ml):
Antimony (Sb) 200
Boron (B) 100
Magnesium (Mg) 1000
Silver (Ag) 50
Thallium (Tl) 200
PRODUCT PACKING CONT.
NO. BOX
6005-01 100 ml
For use in EPA SW-846 Methods 60 10 and 200.7.
Traceable to NIST.
AMohr’s SaltSee Ammonium Iron (II) Sulfate Hexahydrate
1569Molecular Sieve 3Å8-12 mesh / ’BAKER ANALYZED’
NC CODE 3824 90 15 Loss on Drying at 300°C max. 5% PRODUCT PACKING CONT.
NO. BOX
1569.1000 1 kg
0810Molecular Sieve 4Å8-12 mesh / ’BAKER ANALYZED’
NC CODE 3824 90 15 Loss on Drying at 300°C max. 5% PRODUCT PACKING CONT.
NO. BOX
0810.1000 1 kg
Activated.
5769Molybdenum 1000 mg/ml(Matrix 2% ammonium hydroxide) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Mo
M = 95.94 g/mol
NC CODE 3822 00 00
Certificate Provided Reporting Actual Lot AnalysisMolybdenum (Mo) 998- 1002 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5769.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within ± 0.2%. Typically 1000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
6935Molybdenum 1000 mg/ml(Matrix 2% ammonium hydroxide) / ’BAKER INSTRA-ANALYZED’ / Atomic Absorption Standard
A Mo
M = 95.94 g/mol
NC CODE 3822 00 00
Molybdenum (Mo) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6935.0100 100 ml
6935.0500 500 ml
Prepared by dissolution of high purity raw materials (min.
99.99% spectral purity). Assays are verified by ICP against
standards traceable to NIST. Standard Reference Material
numbers (SRM) are printed on each label.
6818Molybdenum 1000 mg/ml’BAKER ANALYZED’ / Atomic Absorption Standard
A Mo
M = 95.94 g/mol
NC CODE 3822 00 00
Molybdenum (Mo) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6818.0100 100 ml
6818.0500 500 ml
Ammonium heptamolybdate in ammoniumhydroxide 0.5
mol/l.
Mixed
270
MediaWare No: 230 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 271 2-DEC-05 10:37:06 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
5737Molybdenum 10000 mg/ml(Matrix: 4% Ammonium Hydroxide) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Mo
M = 95.94 g/mol
NC CODE 3822 00 00
Certificate Provided Reporting Actual Lot AnalysisMolybdenum (Mo) 9980- 10020 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5737.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within 0.2 %. Typically 10000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
0176Molybdic Acidpowder / ’BAKER ANALYZED’ / ACS
CAS NO. 7782-9 1 -4
EINECS 23 1 -970-5
NC CODE 2825 70 00
UN/ID NO. 3288
ADR/RID 6. 1 T5
IMDG 6. 1 /III
R: 36/37-48/20/22
S: 22-25
4Xn
harmful
Meets ACS SpecificationsAssay (as MoO3) min. 85.0%
Arsenate, Phosphate and Silicate (as SiO2) max. 0.00 1%
Chloride (Cl) max. 0.002%
Heavy Metals (as Pb) max. 0.003%
Insoluble in Dilute NH4OH max. 0.0 1%
Sulfate (SO4) max. 0.2%
Trace Impurities (in ppm):
Phosphate (PO4) max. 5
PRODUCT PACKING CONT.
NO. BOX
0176.0250 250 g
Molybdic Acid Reagent is commonly known as Molybdic
Acid 85% and consists largely of ammonium molybdate.
CMonochloroacetic AcidSee Chloroacetic Acid
CMonochlorobenzeneSee Chlorobenzene
CMonoethanolamineSee Ethanolamine
C3-(4-Morpholine)propanesulfonic acid, sodium saltSee MOPS, Sodium salt
40142-(N-Morpholino)-ethanesulfonic Acid Monohydratecrystalline / ’BAKER ULTRAPURE BIOREAGENT’
A CH2CH2OCH2CH2NCH2CH2SO3H.H2O
M = 2 13.25 g/mol
CAS NO. 4432-3 1 -9
EINECS 224-632-3
NC CODE 2934 90 96
Buffer for Liquid Chromatography and otherMolecular Biology ApplicationsAssay min. 98%
Appearance passes test
Colour of a 1M Alkaline Solution passes test
DNase Activity none detected
Identification (by IR) passes test
Loss on Drying at 130°C 7- 10%
Protease Activity none detected
RNase Activity none detected
Product Information (not specifications):
pKa at 20°C 6. 15
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 2
PRODUCT PACKING CONT.
NO. BOX
4014.0020 20 g
4014.0200 200 g
4014.1000 1 kg
Morph
271
MediaWare No: 231 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 272 2-DEC-05 10:37:06 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
M
4004Morpholinopropane Sulfonicacid’BAKER ULTRAPURE BIOREAGENT’
A C7H15NO4S
M = 209.26 g/mol
CAS NO. 1 1 32-6 1 -2
EINECS 2 14-478-5
NC CODE 2934 99 90
Assay (dried basis) min. 99%
Appearance passes test
DNase Activity none detected
Loss on Drying max. 1%
pH of 1% Solution at 25°C 2.5-4.5
Protease Activity none detected
RNase Activity none detected
Solution ( 10% in water) passes test
Absorbance of a 0.1M Solution (1-cm path vs
water):
at 260 nm max. 0.02
Trace Impurities (in ppm):
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 5
PRODUCT PACKING CONT.
NO. BOX
4004.0100 100 g
4004.0500 500 g
4004.2500 2.5 kg
4163MOPS, Sodium salt’BAKER ULTRAPURE BIOREAGENT’
A C7H14NNaO4S
M = 23 1 .25 g/mol
CAS NO. 7 1 19-22-7
NC CODE 2934 99 90
Assay (dried basis) min. 99.0%
Appearance passes test
DNase Activity none detected
Heavy Metals (as Pb) max. 5 ppm
Identification (by IR) passes test
Insoluble Matter max. 1 .0%
Loss on Drying max. 1 .0%
pH of 0. 1 M Solution at 25°C 10.0- 1 1 .0
Protease Activity none detected
RNase Activity none detected
Solubility passes test
Absorbance of a 0.1 M Solution, Maximum (1-cm
path vs water):
at 260 nm max. 0.03
Product Information (not specifications):
pKa at 20°C 7.20
PRODUCT PACKING CONT.
NO. BOX
4163.0025 25 g Glass
4163.0100 100 g
4163.2500 2.5 kg
AMOS chemicalsSee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
AMounting mediumSee UltraKitt
3904MountingClearHISTO GRADE
1 l = 0.69 kg
FLASHPOINT −12 °C
CAS NO. 540-84- 1
NC CODE 290 1 10 00
EC NO. 60 1 009 00 8
UN/ID NO. 1 262
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -38-50/53-65-67
S: 1 6-29-33-9
oN
dangerousfor theenvironment
4Xn
harmful0
F
highlyflammable
Intended for use as a Alcohol-Mountantintermediate during coverslipping in Histology andCytologyAromates (by UV) not detected
Assay (by GC)(2,2,4 Trimethylpentane) min. 90% (w/w)
Color (APHA) max. 10
PRODUCT PACKING CONT.
NO. BOX
3904.2500 2.5 l Glass
AMulticompendial ProductsSee for detailed information section Pharmaceutical Products, page 36
AMulti-Element CCV Solution I & IISee CCV Solution I & II
Morph
272
MediaWare No: 232 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 273 2-DEC-05 10:37:06 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
N
CMulti-Element ICS Solution AB-1&AB-2See ICS Solution AB-1 & AB-2
CMulti-Element ICV Solution I & IISee ICV Solution I & II
CMulti-Element Interference Check Standard ISee Interference Check Standard I
CMulti Element Interference Check Standard IISee Interference Check Standard II
CMulti-Element Interference Check Standard IVSee Interference Check Standard IV
CMulti-Element Mixed Calibration Standard IIISee Mixed Calibration Standard III
CMulti-Element Mixed Calibration Standard IVSee Mixed Calibration Standard IV
CMulti-Element Mixed Calibration Standard VSee Mixed Calibration Standard V
CMulti-Element Primary Drinking Water Std ISee Primary Drinking Water Standard I
CMulti-Element Trace Metal Standard ISee Trace Metal Standard I
CMulti-Element Trace metal Standard IIISee Trace Metal Standard III
CMulti-Element Water Standard I & IISee Water Standard I & II
1149Murexide’BAKER ANALYZED’
A C8H8N6O6.H2O
M = 302.22 g/mol
CAS NO. 305 1 -09-0
EINECS 22 1 -266-6
NC CODE 2933 54 00
Sensitivity as Indicator passes test PRODUCT PACKING CONT.
NO. BOX
1149.0025 25 g Glass
11501-Naphthol’BAKER ANALYZED’
A C10H7OH
M = 1 44. 17 g/mol
CAS NO. 90- 15-3
EINECS 20 1 -969-4
NC CODE 2907 15 10
EC NO. 604 029 00 5
R: 2 1 /22-37/38-4 1
S: 22-26-37/39
4Xn
harmful
Assay min. 99%
Melting Point 93-96°C
Residue after Ignition max. 1%
PRODUCT PACKING CONT.
NO. BOX
1150.0100 100 g
Napht
273
MediaWare No: 233 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 274 2-DEC-05 10:37:07 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
N
1341N-(1-Naphthyl) Ethylenediamine Dihydrochloride’BAKER ANALYZED’ / For Nitrogen Dioxide Determination (ASTM D-1607) / ACS
A C10H7NHCH2CH2NH2.2HCl
M = 259. 18 g/mol
CAS NO. 1 465-25-4
EINECS 2 15-98 1 -2
NC CODE 292 1 59 90
R: 36/38
S: 24/25-26
4Xi
irritant
Meets ACS Specifications. Meets ReagentSpecifications for testing USP/NF monographsSensitivity for Sulfanilamide passes test
Solubility passes test
Suitability for Nitrogen Dioxide
Determination(ASTM D1607) passes test
Water (H2O) max. 5%
PRODUCT PACKING CONT.
NO. BOX
1341.0025 25 g Glass
Marshall’s Reagent.
ANeocuproine HydrochlorideSee 2,9-Dimethyl-1,10 phenanthroline Hydrochloride
ANiacinSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
5770Nickel 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Ni
M = 58.69 g/mol
NC CODE 3822 00 00
EC NO. 7 004 00 1
R: 36/37/38
S: 26-37
4Xi
irritant
Certificate Provided Reporting Actual Lot AnalysisNickel (Ni) 998- 1002 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5770.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within ± 0.2%. Typically 1000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
6936Nickel 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Atomic Absorption Standard
A Ni
M = 58.69 g/mol
NC CODE 3822 00 00
EC NO. 7 004 00 1
R: 36/38
S: 26-37
4Xi
irritant
Nickel (Ni) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6936.0100 100 ml
6936.0500 500 ml
Prepared by dissolution of high purity raw materials (min.
99.99% spectral purity). Assays are verified by ICP against
standards traceable to NIST. Standard Reference Material
numbers (SRM) are printed on each label.
6819Nickel 1000 mg/ml’BAKER ANALYZED’ / Atomic Absorption Standard
A Ni
M = 58.69 g/mol
NC CODE 3822 00 00
EC NO. 7 004 00 1
R: 36/38
S: 26-37
4Xi
irritant
Nickel (Ni) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6819.0100 100 ml
6819.0500 500 ml
Nickel nitrate in nitric acid 0.5 mol/l.
Napht
274
MediaWare No: 234 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 275 2-DEC-05 10:37:07 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
N
5738Nickel 10000 mg/ml1 .00% (w/v) / (Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Ni
M = 58.69 g/mol
NC CODE 3822 00 00
EC NO. 7 004 00 1
R: 36/38
S: 26
4Xi
irritant
Certificate Provided Reporting Actual Lot AnalysisNickel (Ni) 9980- 10020 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5738.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within 0.2 %. Typically 10000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
0179Nickel(II) Acetate 4-hydrate’BAKER ANALYZED’
A (CH3COO)2Ni.4H2O
M = 248.86 g/mol
CAS NO. 373-02-4
EINECS 206-76 1 -7
NC CODE 29 15 29 00
R: 22
S: 24
4Xn
harmful
Assay (by EDTA titrn.) min. 97.0%
Chloride (Cl) max. 0.00 1%
Cobalt (Co) max. 0.2%
Copper (Cu) max. 0.0 1%
Insoluble Matter max. 0.005%
Iron (Fe) max. 0.002%
Lead (Pb) max. 0.005%
Nitrogen Compounds (as N) max. 0.005%
pH of 5% Solution at 25°C 6.0-7.0
Sulfate (SO4) max. 0.005%
Zinc (Zn) max. 0.02%
PRODUCT PACKING CONT.
NO. BOX
0179.9050 50 kg
0181Nickel(II) Carbonate’BAKER ANALYZED’
CAS NO. 3333-67-3
EINECS 222-068-2
NC CODE 2836 99 18
EC NO. 28 0 10 00 0
R: 22-40-43-50/53
S: 22-36/37-60-6 1
oN
dangerousfor theenvironment
4Xn
harmful
Assay (as Ni) (by EDTA titrn.) min. 45.0%
Chloride (Cl) max. 0.002%
Cobalt (Co) (by AAS) max. 0. 1%
Copper (Cu) (by AAS) max. 0.0 1%
Insoluble in HCl max. 0.0 1%
Iron (Fe) (by AAS) max. 0.004%
Lead (Pb) (by AAS) max. 0.002%
Nitrogen Compounds (as N) max. 0.02%
Sulfate (SO4) max. 0.0 1%
Zinc (Zn) (by AAS) max. 0.0 1%
PRODUCT PACKING CONT.
NO. BOX
0181.0500 500 g
0182Nickel(II) Chloride Hexahydrate’BAKER ANALYZED’
A NiCl2.6H2O
M = 237.7 1 g/mol
CAS NO. 779 1 -20-0
EINECS 23 1 -743-0
NC CODE 2827 35 00
UN/ID NO. 3288
ADR/RID 6. 1 T5
IMDG 6. 1 /III
R: 23/24/25E-45
S: 22-36/37-44
3T
toxic
Assay (by EDTA titrn.) min. 97.0%
Barium (Ba) max. 0.005%
Calcium (Ca) max. 0.005%
Cobalt (Co) max. 0.002%
Insoluble Matter max. 0.005%
Iron (Fe) max. 0.002%
Lead (Pb) max. 0.00 1%
Magnesium (Mg) max. 0.005%
Nitrogen Compounds (as N) max. 0.005%
pH of 5% Solution at 25°C 4.0-7.0
Potassium (K) max. 0.00 1%
Sodium (Na) max. 0.0 1%
Sulfate (SO4) max. 0.005%
Trace Impurities (in ppm):
Copper (Cu) max. 5
Lithium (Li) max. 1
Zinc (Zn) max. 50
PRODUCT PACKING CONT.
NO. BOX
0182.9050 50 kg
Nicke
275
MediaWare No: 235 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 276 2-DEC-05 10:37:08 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
N
0183Nickel(II) Chloride Hexahydrate’BAKER’
A NiCl2.6H2O
M = 237.7 1 g/mol
CAS NO. 779 1 -20-0
EINECS 23 1 -743-0
NC CODE 2827 35 00
UN/ID NO. 3288
ADR/RID 6. 1 T5
IMDG 6. 1 /III
R: 23/24/25E-45
S: 22-36/37-44
3T
toxic
Assay (by EDTA titrn.) min. 96%
Insoluble Substances max. 0.0 1%
Lead (Pb) max. 0.0 1%
pH of 5% Solution at 25°C 3.0-7.0
PRODUCT PACKING CONT.
NO. BOX
0183.2500 2.5 kg
0184Nickel(II) Nitrate Hexahydrate’BAKER ANALYZED’
A Ni(NO3)2.6H2O
M = 290.8 1 g/mol
CAS NO. 1 3478-00-7
EINECS 236-068-5
NC CODE 2834 29 20
UN/ID NO. 2725
ADR/RID 5. 1 O2
IMDG 5. 1 /III
R: 22-43-8
S: 24-36/37
4Xn
harmful
Assay (by EDTA titrn.) min. 99.0%
Ammonium (NH4) max. 0.05%
Chloride (Cl) max. 0.00 1%
Cobalt (Co) (by AAS) max. 0.05%
Insoluble Matter max. 0.005%
Iron (Fe) (by AAS) max. 0.00 1%
Lead (Pb) (by AAS) max. 0.002%
pH of 5% Solution at 25°C 3.5-5.5
Sulfate (SO4) max. 0.003%
Zinc (Zn) (by AAS) max. 0.0 1%
Trace Impurities (in ppm):
Copper (Cu) (by AAS) max. 5
PRODUCT PACKING CONT.
NO. BOX
0184.0500 500 g
1153Nickel(II) Oxide GreenPowder / ’BAKER ANALYZED’
A NiO
M = 74.7 1 g/mol
CAS NO. 1 3 13-99- 1
EINECS 2 15-2 15-7
NC CODE 2825 40 00
EC NO. 28 003 00 2
R: 43-49-53
S: 45-53-6 1
3T
toxic
Assay (by EDTA titrn.) min 99.0%
Aluminium (Al) max. 0.005%
Average Particle Diameter, mm (APD) (by
Sedigraph)(typical) max. 3
Calcium (Ca) max. 0.005%
Chloride (Cl) max. 0.00 1%
Cobalt (Co) max. 0.2%
Copper (Cu) max. 0.005%
Iron (Fe) max. 0.0 1%
Lead (Pb) max. 0.0 1%
Nitrogen Compounds (as N) max. 0.005%
Potassium (K) max. 0.005%
Silicon (Si) max. 0.0 1%
Sodium (Na) max. 0.02%
Total Sulfur (S) max. 0.0 1%
Zinc (Zn) max. 0.02%
PRODUCT PACKING CONT.
NO. BOX
1153.2500 2.5 kg
Nicke
276
MediaWare No: 236 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 277 2-DEC-05 10:37:08 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
N
0185Nickel(II) Sulfate Hexahydrate’BAKER ANALYZED’ / ACS
A NiSO4.6H2O
M = 262.86 g/mol
CAS NO. 1 0 10 1 -97-0
EINECS 232- 104-9
NC CODE 2833 24 00
EC NO. 28 009 00 5
R: 22-40-42/43-50/53
S: 22-36/37-60-6 1
oN
dangerousfor theenvironment
4Xn
harmful
Exceeds ACS SpecificationsAssay 98.0- 102.0%
Calcium (Ca) max. 0.005%
Chloride (Cl) max. 0.00 1%
Cobalt (Co) max. 0.002%
Copper (Cu) max. 0.005%
Insoluble Matter max. 0.005%
Iron (Fe) max. 0.00 1%
Lithium (Li) max. 1 ppm
Magnesium (Mg) max. 0.005%
Manganese (Mn) max. 0.002%
Nitrogen Compounds (as N) max. 0.002%
pH of 5% Solution at 25°C 3.0-5.0
Potassium (K) max. 0.00 1%
Sodium (Na) max. 0.0 1%
Zinc (Zn) max. 50 ppm
PRODUCT PACKING CONT.
NO. BOX
0185.0250 250 g
0185.1000 1 kg
5771Niobium 1000 mg/ml(Matrix: H2O plus a trace of hydrofluoric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Nb
M = 92.9 1 g/mol
NC CODE 3822 00 00
R: 20/2 1 /22-36
S: 26-36/37
4Xn
harmful
Certificate Provided Reporting Actual Lot AnalysisNiobium (Nb) 998- 1002 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5771.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within ± 0.2%. Typically 1000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
5760Niobium 10000 mg/ml1 .00% (w/v) / (Matrix: H2O plus a trace of hydrofluoric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Nb
M = 92.9 1 g/mol
NC CODE 3822 00 00
R: 20/2 1 /22-36
S: 26-36/37
4Xn
harmful
Certificate Provided Reporting Actual Lot AnalysisNiobium (Nb) 9980- 10020 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5760.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within 0.2 %. Typically 10000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
Niobi
277
MediaWare No: 237 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 278 2-DEC-05 10:37:09 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
N
6901Nitric Acid70% / ULTREX II Ultrapure Reagent
A HNO3
M = 63.0 1 g/mol
1 l = 1 .4 1 kg
CAS NO. 7697-37-2
EINECS 23 1 -7 14-2
NC CODE 2808 00 00
EC NO. 7 004 00 1
UN/ID NO. 203 1
ADR/RID 8 CO1
IMDG 8/II
R: 35
S: 23-26-36-45
1C
corrosive
Certificate Provided Reporting Actual Lot AnalysisAssay 67-70% (w/w)
Trace Impurities (in ppt) (pg/g):
Aluminium (Al) max. 20
Antimony (Sb) max. 10
Arsenic (As) max. 20
Barium (Ba) max. 10
Beryllium (Be) max. 10
Bismuth (Bi) max. 10
Boron (B) max. 20
Cadmium (Cd) max. 10
Calcium (Ca) max. 20
Cerium (Ce) max. 10
Cesium (Cs) max. 10
Chromium (Cr) max. 20
Cobalt (Co) max. 10
Copper (Cu) max. 20
Dysprosium (Dy) max. 1
Erbium (Er) max. 1
Europium (Eu) max. 1
Gadolinium (Gd) max. 1
Gallium (Ga) max. 10
Germanium (Ge) max. 10
Gold (Au) max. 20
Hafnium (Hf) max. 10
Holmium (Ho) max. 1
Indium (In) max. 1
Iron (Fe) max. 20
Lanthanum (La) max. 1
Lead (Pb) max. 10
Lithium (Li) max. 10
Lutetium (Lu) max. 1
Magnesium (Mg) max. 10
Manganese (Mn) max. 10
Mercury (Hg) max. 100
Molybdenum (Mo) max. 10
Neodymium (Nd) max. 1
Nickel (Ni) max. 50
Niobium (Nb) max. 1
Palladium (Pd) max. 20
Platinum (Pt) max. 20
Potassium (K) max. 10
Praseodymium (Pr) max. 1
Rhenium (Re) max. 10
Rhodium (Rh) max. 10
Rubidium (Rb) max. 10
Ruthenium (Ru) max. 20
Samarium (Sm) max. 1
Scandium (Sc) max. 10
Selenium (Se) act. value reported
Silver (Ag) max. 10
Sodium (Na) max. 10
Strontium (Sr) max. 10
Tantalum (Ta) act. value reported
Tellurium (Te) max. 1
Terbium (Tb) max. 1
Thallium (Tl) max. 10
Thorium (Th) max. 1
Thulium (Tm) max. 1
Tin (Sn) max. 20
Titanium (Ti) max. 10
Tungsten (W) max. 10
Uranium (U) max. 1
Vanadium (V) max. 10
Ytterbium (Yb) max. 1
Yttrium (Y) max. 1
Zinc (Zn) max. 20
Zirconium (Zr) max. 10
PRODUCT PACKING CONT.
NO. BOX
6901.0500 500 ml Fluoropolymer, pre-leached
6901.1000 1 l Fluoropolymer, pre-leached
6901.2000 2 l Fluoropolymer, pre-leached
ANitric Acid 70% CMOS, Finyte GradeSee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
Nitri
278
MediaWare No: 238 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 279 2-DEC-05 10:37:09 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
N
9598Nitric Acid69.0-70.0 % / ’BAKER INSTRA-ANALYZED’ / for Trace Metal Analysis / ACS
A HNO3
M = 63.0 1 g/mol
1 l = 1 .42 kg
CAS NO. 7697-37-2
EINECS 23 1 -7 14-2
NC CODE 2808 00 00
EC NO. 7 004 00 1
UN/ID NO. 203 1
ADR/RID 8 CO1
IMDG 8/II
R: 35
S: 23-26-36-45
1C
corrosive
Meets ACS SpecificationsAssay 69.0-70.0%
Appearance passes test
Color (APHA) max. 10
Residue after Ignition max. 2 ppm
Specific Gravity at 60°/60°F 1 .4 16- 1 .420
Trace Impurities (in ppb):
Aluminium (Al) max. 30
Arsenic and Antimony (as As) max. 5
Barium (Ba) max. 1
Beryllium (Be) max. 1
Bismuth (Bi) max. 1
Boron (B) max. 4
Cadmium (Cd) max. 1
Calcium (Ca) max. 50
Chromium (Cr) max. 10
Cobalt (Co) max. 1
Copper (Cu) max. 1
Gallium (Ga) max. 20
Germanium (Ge) max. 4
Gold (Au) max. 4
Heavy Metals (as Pb) max. 100
Iron (Fe) max. 10
Lead (Pb) max. 0.5
Lithium (Li) max. 1
Magnesium (Mg) max. 7
Manganese (Mn) max. 1
Mercury (Hg) max. 0.5
Molybdenum (Mo) max. 5
Nickel (Ni) max. 1
Niobium (Nb) max. 1
Potassium (K) max. 5
Silicon (Si) max. 20
Silver (Ag) max. 1
Sodium (Na) max. 200
Strontium (Sr) max. 1
Tantalum (Ta) max. 2
Thallium (Tl) max. 5
Tin (Sn) max. 5
Vanadium (V) max. 1
Zinc (Zn) max. 5
Zirconium (Zr) max. 1
Trace Impurities (in ppm):
Chloride (Cl) max. 0.04
Phosphate (PO4) max. 0. 1
Sulfate (SO4) max. 0.4
PRODUCT PACKING CONT.
NO. BOX
9598.0500 500 ml 6
9598.2500 2.5 l 4
Nitri
279
MediaWare No: 239 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 280 2-DEC-05 10:37:09 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
N
6019Nitric Acid69.0-70.0 % / ’BAKER ANALYZED’ / ACS
A HNO3
M = 63.0 1 g/mol
1 l = 1 .42 kg
CAS NO. 7697-37-2
EINECS 23 1 -7 14-2
NC CODE 2808 00 00
EC NO. 7 004 00 1
UN/ID NO. 203 1
ADR/RID 8 CO1
IMDG 8/II
R: 35
S: 23-26-36-45
1C
corrosive
Meets ACS Specifications. Meets ReagentSpecifications for testing USP/NF monographsAssay 69.0-70.0%
Appearance passes test
Color (APHA) max. 10
Residue after Ignition max. 4 ppm
Specific Gravity at 60°/60°F 1 .4 16 - 1 .420
Trace Impurities (in ppb):
Aluminium (Al) max. 100
Arsenic and Antimony (as As) max. 4
Boron (B) max. 50
Calcium (Ca) max. 200
Chromium (Cr) max. 100
Copper (Cu) max. 50
Gold (Au) max. 200
Heavy Metals (as Pb) max. 100
Iron (Fe) max. 100
Lead (Pb) max. 100
Magnesium (Mg) max. 100
Manganese (Mn) max. 100
Mercury (Hg) max. 5
Nickel (Ni) max. 50
Potassium (K) max. 300
Tin (Sn) max. 200
Titanium (Ti) max. 200
Zinc (Zn) max. 200
Trace Impurities (in ppm):
Chloride (Cl) max. 0. 1
Phosphate (PO4) max. 0.2
Sulfate (SO4) max. 0.5
PRODUCT PACKING CONT.
NO. BOX
6019.2500 2.5 l 4
6019.2500PE 2.5 l HDPE 4
ANitric Acid, 69.0-70.0%See for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
Nitri
280
MediaWare No: 240 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 281 2-DEC-05 10:37:10 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
N
6080Nitric Acid65% (max. 5 ppb Hg) / ’BAKER ANALYZED’
A HNO3
M = 63.0 1 g/mol
1 l = 1 .40 kg
CAS NO. 7697-37-2
EINECS 23 1 -7 14-2
NC CODE 2808 00 00
EC NO. 7 004 00 1
UN/ID NO. 203 1
ADR/RID 8 CO1
IMDG 8/II
R: 35
S: 23-26-36/37/39-45
1C
corrosive
Assay min. 65%
Chloride (Cl) max. 0.5 ppm
Dithizone determination passes test
Mercury (Hg) max. 5 ppb
Residue after Ignition max. 5 ppm
Sulfate (SO4) max. 1 ppm
Trace Impurities (in ppm):
Aluminium (Al) max. 0.05
Arsenic (As) max. 0.05
Barium (Ba) max. 0.02
Beryllium (Be) max. 0.0 1
Cadmium (Cd) max. 0.02
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0. 1
Cobalt (Co) max. 0.0 1
Copper (Cu) max. 0.0 1
Germanium (Ge) max. 0.05
Iron (Fe) max. 0. 1
Lead (Pb) max. 0.05
Lithium (Li) max. 0.0 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.0 1
Molybdenum (Mo) max. 0.02
Nickel (Ni) max. 0.05
Potassium (K) max. 0. 1
Silver (Ag) max. 0.0 1
Sodium (Na) max. 0.5
Strontium (Sr) max. 0.0 1
Thallium (Tl) max. 0.05
Titanium (Ti) max. 0. 1
Vanadium (V) max. 0.0 1
Zinc (Zn) max. 0.05
Zirconium (Zr) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
6080.1000 1 l 6
6080.2500 2.5 l 4
6080.2500PE 2.5 l HDPE 4
6080.9025 25 l
CNitric Acid 65% CMOS, Finyte GradeSee for detailed information section Microelectronic materials page 32 or the website www.jtbaker.com/micro
7119Nitric Acid2 mol/l / ’BAKER ANALYZED’
A HNO3
M = 63.0 1 g/mol
CAS NO. 7697-37-2
EINECS 23 1 -7 14-2
NC CODE 2808 00 00
UN/ID NO. 203 1
ADR/RID 8 CO1
R: 34
S: 26-36/39-45
1C
corrosive
Titer (mol/l) 1 .995 - 2.005 PRODUCT PACKING CONT.
NO. BOX
7119.1000 1 l 6
7119.5000 5 l
7119.9020 20 l
Volumetric Solution, ready for use.
Nitri
281
MediaWare No: 241 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 282 2-DEC-05 10:37:10 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
N
7622Nitric Acid1 mol/l / ’BAKER ANALYZED’
A HNO3
M = 63.0 1 g/mol
CAS NO. 7697-37-2
EINECS 23 1 -7 14-2
NC CODE 2808 00 00
UN/ID NO. 203 1
ADR/RID 8 CO1
IMDG 8/II
R: 34
S: 26-36/39-45
1C
corrosive
Titer (mol/l) 0.995- 1 .005 PRODUCT PACKING CONT.
NO. BOX
7622.5000 5 l HDPE
7622.9020 20 l Polycube
Volumetric Solution, ready for use.
4868Nitric Acid1 mol/l / DILUT-IT
1 l = 1 .38 kg
NC CODE 2808 00 00
UN/ID NO. 203 1
ADR/RID 8 CO1
IMDG 8/II
R: 35
S: 23A-26-36/39-45
1C
corrosive
PRODUCT PACKING CONT.
NO. BOX
4868 1 amp. 6
Volumetric Concentrate, for dilution to 1 l.
4712Nitric Acid0.1 mol/l / DILUT-IT
A HNO3
M = 63.0 1 g/mol
CAS NO. 7697-37-2
EINECS 23 1 -7 14-2
NC CODE 2808 00 00
EC NO. 7 004 00 1
UN/ID NO. 203 1
ADR/RID 8 CO1
IMDG 8/II
R: 34
S: 23-26-36-45
1C
corrosive
PRODUCT PACKING CONT.
NO. BOX
4712 1 amp.
Volumetric Concentrate, for dilution to 1 l.
3351p-Nitrophenylphosphate, Disodium Salt’BAKER ANALYZED’
A NO2C6H4OPO3Na2.6H2O
M = 37 1 . 1 5 g/mol
CAS NO. 4264-83-9
EINECS 224-246-5
NC CODE 29 19 00 90
Assay about 70%
Free p-nitrophenol max. 0.07%
PRODUCT PACKING CONT.
NO. BOX
3351.0005 5 g
3351.0025 25 g Glass
Nitri
282
MediaWare No: 242 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 283 2-DEC-05 10:37:10 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
O
8280n-Nonane’BAKER’
A CH3(CH2)7CH3
M = 1 28.26 g/mol
1 l = 0.72 kg
FLASHPOINT 3 1 °C
CAS NO. 1 1 1 -84-2
EINECS 203-9 13-4
NC CODE 290 1 10 00
UN/ID NO. 1 920
ADR/RID 3 F 1
IMDG 3/III
R: 1 0-5 1 /53
S: 1 6-6 1
oN
dangerousfor theenvironment
Assay (by GC) min. 99%
Boiling Point 150- 15 1 °C
Density (g/ml) at 20°C 0.7 17-0.7 18
PRODUCT PACKING CONT.
NO. BOX
8280.2500 2.5 l
COctadecanoic AcidSee Stearic Acid
Ccis-9-Octadecenoic AcidSee Oleic Acid
Ciso-OctaneSee 2,2,4-Trimethylpentane
8159n-Octane’BAKER ANALYZED’
A CH3(CH2)6CH3
M = 1 1 4.23 g/mol
1 l = 0.70 kg
FLASHPOINT 1 2 °C
CAS NO. 1 1 1 -65-9
EINECS 203-892- 1
NC CODE 290 1 10 00
EC NO. 60 1 009 00 8
UN/ID NO. 1 262
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -38-50/53-65-67
S: 1 6-29-33-60-6 1 -62-9
oN
dangerousfor theenvironment
4Xn
harmful0
F
highlyflammable
Assay (by GC) min. 98%
Boiling Point 125- 126°C
PRODUCT PACKING CONT.
NO. BOX
8159.0500 500 ml
28181-Octanesulfonic Acid Sodium Salt’BAKER ANALYZED’
A CH3(CH2)7SO3Na
M = 2 16.27 g/mol
CAS NO. 5324-84-5
EINECS 226- 195-4
NC CODE 2904 10 00
R: 36/38
S: 26
4Xi
irritant
For Ion-Pair ChromatographyAssay (acidimetric) min. 98.0%
UV Absorbance of 0.25M Solution:
at 200 nm max. 0. 10
at 2 10 nm max. 0.05
at 220 nm max. 0.04
at 230 nm max. 0.03
at 240 nm max. 0.02
at 250 nm max. 0.02
at 260 nm max. 0.02
PRODUCT PACKING CONT.
NO. BOX
2818.0025 25 g Glass
Octan
283
MediaWare No: 243 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 284 2-DEC-05 10:37:11 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
O
70601-Octanol’BAKER ANALYZED’
A CH3(CH2)6CH2OH
M = 1 30.23 g/mol
1 l = 0.82 kg
FLASHPOINT 8 1 °C
CAS NO. 1 1 1 -87-5
EINECS 203-9 17-6
NC CODE 2905 16 80
R: 36/38
S: 23
4Xi
irritant
Assay (by GC) min. 99%
Boiling Range 193- 195°C
Density (g/ml) at 20°C 0.824-0.825
Water (H2O) max. 0. 1%
PRODUCT PACKING CONT.
NO. BOX
7060.1000 1 l
7060.9025 25 l
For safe handling of 25 l tin cans, see Self-closing tap.
70592-Octanol’BAKER’
A CH3(CH2)5CHOHCH3
M = 1 30.23 g/mol
1 l = 0.82 kg
FLASHPOINT 74 °C
CAS NO. 1 23-96-6
EINECS 204-667-0
NC CODE 2905 16 20
R: 36/38
S: 23
4Xi
irritant
Boiling Point 178- 18 1 °C
Density (g/ml) at 25°C 0.8 12-0.8 18
PRODUCT PACKING CONT.
NO. BOX
7059.0100 100 ml
7059.1000 1 l
AOil of CedarwoodSee Cedarwood Oil
6035Oleic Acid’BAKER’
A CH3(CH2)7CH:CH(CH2)7COOH
M = 282.47 g/mol
1 l = 0.89 kg
FLASHPOINT 1 89 °C
CAS NO. 1 1 2-80- 1
EINECS 204-007- 1
NC CODE 29 16 15 00
Acid Value 196-204
Congealing Temperature max. 10°C
Iodine Value 85-95
Mineral Acids passes test
Neutral Fat or Mineral Oil passes test
Residue on Ignition max. 0.0 1%
Specific Gravity 0.889-0.895
PRODUCT PACKING CONT.
NO. BOX
6035.1000 1 l
AOleic AcidSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
AOleic Acid Sodium SaltSee Sodium Oleate
4425Orange G’BAKER ANALYZED’ / Certified Stain
A C16H10N2Na2O7S2
M = 452.38 g/mol
CAS NO. 1 936- 15-8
EINECS 2 17-705-6
NC CODE 3204 12 00
Certified for Use in Histology (C.I. 16230)Absorbance at maximum (3.0 mg/200 ml
in H2O, 1 -cm path) act. value reported
Absorbance Maximum, nm act. value reported
Biological Test passes test
Total Dye Content act. value reported
PRODUCT PACKING CONT.
NO. BOX
4425.0025 25 g Glass
Certified by the Biological Stain Commission.
AOrange IIISee Methyl Orange Sodium Salt
AOrthoperiodic AcidSee Periodic Acid
Octan
284
MediaWare No: 244 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 285 2-DEC-05 10:37:11 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
O
COrthophosphoric AcidSee Phosphoric Acid
7141Oxalic Acid0.05 mol/l 0.1N / ’BAKER ANALYZED’
EINECS 205-634-3
NC CODE 29 17 1 1 00
Titer (mol/l) 0.0497-0.0503 PRODUCT PACKING CONT.
NO. BOX
7141.1000 1 l
7141.9020 20 l Polycube
Volumetric Solution, ready for use.
Each lot of this product is standardized potentiometrically
against NIST tracable reference standard.
4665Oxalic Acid0.05 mol/l / DILUT-IT / 1/10 equiv. = 4.502g; 0.1 N
A HOCOCOOH
M = 90.04 g/mol
EINECS 205-634-3
NC CODE 29 17 1 1 00
PRODUCT PACKING CONT.
NO. BOX
4665 1 amp.
Volumetric Concentrate, for dilution to 1 l.
0187Oxalic Acid Dihydrate’BAKER ANALYZED’ / ACS
A HOCOCOOH.2H2O
M = 1 26.07 g/mol
CAS NO. 6 153-56-6
EINECS 205-634-3
NC CODE 29 17 1 1 00
EC NO. 607 006 00 8
R: 2 1 /22
S: 24/25
4Xn
harmful
Exceeds ACS SpecificationsAssay 99.5- 102.5%
Insoluble Matter max. 0.005%
Nitrogen Compounds (as N) max. 0.00 1%
Residue after Ignition max. 0.0 1%
Substances Darkened by Hot H2SO4 passes test
Sulfate (SO4) max. 0.002%
Trace Impurities (in ppm):
Calcium (Ca) max. 5
Chloride (Cl) max. 5
Heavy Metals (as Pb) max. 5
Iron (Fe) max. 2
PRODUCT PACKING CONT.
NO. BOX
0187.1000 1 kg 6
0187.9025 25 kg
9488Oxidizing (ABI)’BAKER ANALYZED’ / for DNA/RNA synthesis
FLASHPOINT −14 °C
NC CODE 3822 00 00
UN/ID NO. 1 993
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 - 1 9-20/2 1 /22-36/37
S: 1 6-23-25-36/37-9
4Xn
harmful0
F
highlyflammable
Suitable for Oligonucleotide SynthesisAssay Pyridine 18.5-2 1 .0% (v/v)
Molarity (Iodine) 0.0 18-0.022
PRODUCT PACKING CONT.
NO. BOX
9488.0200 200 ml Glass
9488.0450 450 ml Glass
9488.2000 2 l Glass
9488.2500 2.5 l Glass
9519Oxidizing (ABI)’BAKER ANALYZED’ / for DNA/RNA synthesis
FLASHPOINT −21 °C
NC CODE 3822 00 00
UN/ID NO. 1 993
ADR/RID 3,3b
IMDG 3. 1 /II
R: 1 1 - 1 9-36/37
S: 1 6-26-33-9
0F
highlyflammable
4Xi
irritant
Suitable for Oligonucleotide SynthesisAssay Iodine (g/l) 3.87 - 4.73
Assay Iodine (mol/l) 0.0 15 - 0.0 19
PRODUCT PACKING CONT.
NO. BOX
9519.0200 200 ml Glass
9519.0450 450 ml Glass
9519.0900 900 ml Glass
Oxidi
285
MediaWare No: 245 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 286 2-DEC-05 10:37:12 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
O
AOxidizing reagents for use in DNA synthesisSee for detailed information section Reagents for DNA/RNA Synthesis, page 261
AOxidizing reagents for use in DNA/RNA synthesisSee for detailed information section Reagents for DNA/RNA Synthesis, page 261
85642,2’-Oxydiethanol’BAKER’
A HOCH2CH2OCH2CH2OH
M = 1 06. 12 g/mol
1 l = 1 . 1 1 kg
FLASHPOINT 1 24 °C
CAS NO. 1 1 1 -46-6
EINECS 203-872-2
NC CODE 2909 4 1 00
Boiling Point 242-250°C PRODUCT PACKING CONT.
NO. BOX
8564.2500 2.5 l
APackaging OptionsSee for detailed information section Packaging Options, page 12
5772Palladium 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Pd
M = 1 06.42 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26
4Xi
irritant
Certificate Provided Reporting Actual Lot AnalysisPalladium (Pd) 998- 1002 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5772.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within ± 0.2%. Typically 1000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
6953Palladium 1000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Atomic Absorption Standard
A Pd
M = 1 06.42 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26
4Xi
irritant
Palladium (Pd) 998- 1002 mg/ml PRODUCT PACKING CONT.
NO. BOX
6953.0100 100 ml
6953.0500 500 ml
Prepared by dissolution of high purity raw materials (min.
99.99% spectral purity). Assays are verified by ICP against
standards traceable to NIST. Standard Reference Material
numbers (SRM) are printed on each label.
5739Palladium 10000 mg/ml(Matrix: 2% nitric acid) / ’BAKER INSTRA-ANALYZED’ / Plasma Standard
A Pd
M = 1 06.42 g/mol
NC CODE 3822 00 00
R: 36/38
S: 26-37
4Xi
irritant
Certificate Provided Reporting Actual Lot AnalysisPalladium (Pd) 9980- 10020 mg/ml
PRODUCT PACKING CONT.
NO. BOX
5739.0100 100 ml
Prepared from the highest purity raw material available,
generally greater than 99.999% spectral purity. The
content of the solution is confirmed to be accurate to
within 0.2 %. Typically 10000 mg/ml.
The certificate of analysis provided reports actual lot
analysis. The certificate also lists the trace impurities.
1156PANPowder / ’BAKER ANALYZED’
A C5H4NN:NC10H6OH
M = 249.28 g/mol
CAS NO. 85-85-8
EINECS 20 1 -637-9
NC CODE 2933 39 95
Sensitivity as Indicator passes test PRODUCT PACKING CONT.
NO. BOX
1156.0001 1 g
Oxidi
286
MediaWare No: 246 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 287 2-DEC-05 10:37:12 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
CPancreatinSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
3864Papanicolaou solution 2a, Orange G solution OG6Cytology
FLASHPOINT 1 2 °C
NC CODE 2207 10 00
UN/ID NO. 1 992
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -20/2 1 /22-68/20/2 1 /22
S: 1 6-36/37-7/9
4Xn
harmful0
F
highlyflammable
Staining solution used in the Papanicolaouprocedure. For cytological cancer and cyclediagnosis
PRODUCT PACKING CONT.
NO. BOX
3864.1000 1 l Glass
3864.2500 2.5 l Glass
CPapanicolaou 2a Orange GSee for detailed information www.jtbaker.com and select Clinical
3865Papanicolaou solution 2b, Orange II solutionCytology
FLASHPOINT 1 2 °C
NC CODE 2207 10 00
UN/ID NO. 1 992
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -20/2 1 /22-68/20/2 1 /22
S: 1 6-36/37-7/9
4Xn
harmful0
F
highlyflammable
Staining solution used in the Papanicolaouprocedure. For cytological cancer and cyclediagnosis
PRODUCT PACKING CONT.
NO. BOX
3865.1000 1 l Glass
3865.2500 2.5 l Glass
Excluding excise.
CPapanicolaou 2b Orange IISee for detailed information www.jtbaker.com and select Clinical
3866Papanicolaou solution 3b, Polychrome solution EA 50Cytology
FLASHPOINT 1 2 °C
NC CODE 2207 10 00
UN/ID NO. 1 992
ADR/RID 3 FT1
IMDG 3/II
R: 1 1 -23/24/25-39/23/24/25
S: 1 6-36/37-45-7/9
0F
highlyflammable
3T
toxic
Staining solution used in the Papanicolaouprocedure. For cytological cancer and cyclediagnosis
PRODUCT PACKING CONT.
NO. BOX
3866.1000 1 l Glass
3866.2500 2.5 l Glass
CPapanicolaou 3b Polychrome SolutionSee for detailed information www.jtbaker.com and select Clinical
7160ParaffinLiquid / ’BAKER’
1 l = 0.88 kg
FLASHPOINT 1 99 °C
CAS NO. 80 12-95- 1
EINECS 232-384-2
NC CODE 27 12 20 10
Color (APHA) max. 20
Identification (by IR) passes test
PRODUCT PACKING CONT.
NO. BOX
7160.1000 1 l 6
7160.5000 5 l EcoTainer
7160.9200 200 l
Paraf
287
MediaWare No: 247 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 288 2-DEC-05 10:37:12 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
9513ParaffinPellets / ’BAKER’
CAS NO. 8002-74-2
EINECS 232-3 15-6
NC CODE 27 12 20 10
Melting Point 52-54°C PRODUCT PACKING CONT.
NO. BOX
9513.1000 1 kg
9513.9025 25 kg
3451Paraffin CleanerHISTO GRADE
FLASHPOINT 57 °C
NC CODE 3822 00 00
UN/ID NO. 1 993
ADR/RID 3 F 1
IMDG 3/III
R: 4 1 -65-67
S: 1 6-23-26-39
4Xn
harmful
PRODUCT PACKING CONT.
NO. BOX
3451.1500 125 ml glass x 12
AParaffin for HistologySee UltraPar (54-56°C)
AParaffin pellets for HistologySee for detailed information www.jtbaker.com and select Clinical
1157Paraformaldehyde’BAKER’
A (CH2O)n
M = 30.03 g/mol
FLASHPOINT 70 °C
CAS NO. 30525-89-4
EINECS 200-00 1 -8
NC CODE 29 12 60 00
UN/ID NO. 22 13
ADR/RID 4. 1 F 1
IMDG 4. 1 /III
R: 20/22-36/37/38-40-43
S: 22-26-36/37
4Xn
harmful
Assay min. 95%
Reaction passes test
Residue after Ignition max. 0. 1%
Solubility in Ammonium Hydroxide passes test
PRODUCT PACKING CONT.
NO. BOX
1157.1000 1 kg
8239PentaneMixed Isomers / ’BAKER’
A C5H12
M = 72. 15 g/mol
1 l = 0.62 kg
FLASHPOINT −40 °C
CAS NO. 1 09-66-0
EINECS 203-692-4
NC CODE 290 1 10 00
EC NO. 60 1 006 00 1
UN/ID NO. 1 265
ADR/RID 3 F 1
IMDG 3/I
R: 1 2-5 1 /53-65-66-67
S: 1 6-29-33-6 1 -62-9
oN
dangerousfor theenvironment
0F+
extremelyflammable
4Xn
harmful
Boiling Range 34-37°C PRODUCT PACKING CONT.
NO. BOX
8239.2500 2.5 l
8239.9200 200 l
Aiso-PentaneSee 2-Methylbutane
Paraf
288
MediaWare No: 248 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 289 2-DEC-05 10:37:13 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
9333n-Pentane’BAKER ULTRA RESI-ANALYZED’ / for Organic Residue Analysis
A CH3(CH2)3CH3
M = 72. 15 g/mol
1 l = 0.62 kg
FLASHPOINT −40 °C
CAS NO. 1 09-66-0
EINECS 203-692-4
NC CODE 290 1 10 00
EC NO. 60 1 006 00 1
UN/ID NO. 1 265
ADR/RID 3 F 1
IMDG 3/I
R: 1 2-5 1 /53-65-66-67
S: 1 6-29-33-6 1 -62-9
oN
dangerousfor theenvironment
0F+
extremelyflammable
4Xn
harmful
Assay (by GC) (corrected for water) min. 99.0%
Color (APHA) max. 10
Residue after Evaporation max. 1 ppm
Substances Darkened by H2SO4 passes test
Water (by KF, coulometric) max. 100 ppm
Neat Solvent Front Characterization:
ECD-Sensitive Impurities (as Ethylene
Dibromide) Single Impurity Peak (ng/ml) max. 5
Trace Organic Residues:
ECD-Sensitive Impurities (as Heptachlor
Epoxide) Single Impurity Peak (pg/ml) max. 10
FID-Sensitive Impurities (as 2-Octanol)
Single Impurity Peak (ng/ml) max. 5
PRODUCT PACKING CONT.
NO. BOX
9333.1000 1 l 6
9333.4000 4 l Glass 4
9331n-Pentane’BAKER HPLC ANALYZED’ / for use in High Performance Liquid Chromatography
A CH3(CH2)3CH3
M = 72. 15 g/mol
1 l = 0.62 kg
FLASHPOINT −40 °C
CAS NO. 1 09-66-0
EINECS 203-692-4
NC CODE 290 1 10 00
EC NO. 60 1 006 00 1
UN/ID NO. 1 265
ADR/RID 3 F 1
IMDG 3/I
R: 1 2-5 1 /53-65-66-67
S: 1 6-29-33-6 1 -62-9
oN
dangerousfor theenvironment
0F+
extremelyflammable
4Xn
harmful
Assay (by GC) min. 98.0%
Residue after Evaporation (in ppm) max. 2
Substances Darkened by H2SO4 passes test
Water (H2O) max. 0.0 1%
Fluorescence Trace Impurities (as quinine base),
ppb:
Measured at 450 nm max. 0.5
Measured at Emission Maximum for
Solvent Impurities max. 1 .5
Physical Data (not specifications):
Density (g/ml) at 20°C 0.626
Ultraviolet Absorbance (1.00-cm path vs water):
at 2 10 nm max. 0.4
at 220 nm max. 0. 10
at 254 nm max. 0.0 1
at 280 nm max. 0.0 1
UV Cut-off, nm max. 190
PRODUCT PACKING CONT.
NO. BOX
9331.1000 1 l
9331.2500 2.5 l 4
Filtered through a 0.2 micron filter.
Packaged under Nitrogen.
8287n-Pentane’BAKER ANALYZED’ / Ultraviolet Spectrophotometry
A CH3(CH2)3CH3
M = 72. 15 g/mol
1 l = 0.62 kg
FLASHPOINT −40 °C
CAS NO. 1 09-66-0
EINECS 203-692-4
NC CODE 290 1 10 00
EC NO. 60 1 006 00 1
UN/ID NO. 1 265
ADR/RID 3 F 1
IMDG 3/I
R: 1 2-5 1 /53-65-66-67
S: 1 6-29-33-6 1 -62-9
oN
dangerousfor theenvironment
0F+
extremelyflammable
4Xn
harmful
Assay (by GC) min. 99%
Residue after Evaporation max. 5 ppm
Water (H2O) max. 0.0 1%
Ultraviolet Absorbance (1.00-cm path vs water):
at 205 nm max. 1 .00
at 2 10 nm max. 0.30
at 220 nm max. 0. 10
at 245-400 nm max. 0.0 1
PRODUCT PACKING CONT.
NO. BOX
8287.1000 1 l
Penta
289
MediaWare No: 249 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 290 2-DEC-05 10:37:13 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
8114n-Pentane’BAKER ANALYZED’
A CH3(CH2)3CH3
M = 72. 15 g/mol
1 l = 0.62 kg
FLASHPOINT −40 °C
CAS NO. 1 09-66-0
EINECS 203-692-4
NC CODE 290 1 10 00
EC NO. 60 1 006 00 1
UN/ID NO. 1 265
ADR/RID 3 F 1
IMDG 3/I
R: 1 2-5 1 /53-65-66-67
S: 1 6-29-33-6 1 -62-9
oN
dangerousfor theenvironment
0F+
extremelyflammable
4Xn
harmful
Assay (by GC) min. 99%
Boiling Range 35-37°C
Density (g/ml) at 20°C 0.624-0.626
Residue after Evaporation max. 0.00 1%
Sulfur Compounds (as S) max. 0.005%
Water (H2O) max. 0.0 1%
Trace Impurities (in ppm):
Aluminium (Al) max. 0.5
Barium (Ba) max. 0. 1
Boron (B) max. 0.02
Cadmium (Cd) max. 0.05
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0.02
Cobalt (Co) max. 0.02
Copper (Cu) max. 0.02
Iron (Fe) max. 0. 1
Lead (Pb) max. 0. 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.02
Nickel (Ni) max. 0.02
Tin (Sn) max. 0. 1
Zinc (Zn) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
8114.1000 1 l 6
8114.2500 2.5 l 4
8114.5000 5 l EcoTainer
8114.9025 25 l
8114.9200 200 l
EcoTainer, the metal solvent can for more safety in the lab.
For safe handling of 25 l tin cans, see Self-closing tap.
8685n-Pentane’BAKER’
A CH3(CH2)3CH3
M = 72. 15 g/mol
1 l = 0.62 kg
FLASHPOINT −40 °C
CAS NO. 1 09-66-0
EINECS 203-692-4
NC CODE 290 1 10 00
EC NO. 60 1 006 00 1
UN/ID NO. 1 265
ADR/RID 3 F 1
IMDG 3/I
R: 1 2-5 1 /53-65-66-67
S: 1 6-29-33-6 1 -62-9
oN
dangerousfor theenvironment
0F+
extremelyflammable
4Xn
harmful
Assay (by GC) min. 95%
Residue after Evaporation max. 0.00 1%
PRODUCT PACKING CONT.
NO. BOX
8685.2500 2.5 l 4
8685.9200 200 l
28411-Pentanesulfonic Acid Sodium Salt Monohydrate’BAKER HPLC ANALYZED’
A CH3(CH2)6SO3Na.H2O
M = 220.26 g/mol
CAS NO. 22767-49-3
EINECS 245-208-4
NC CODE 2904 10 00
For Ion-Pair Chromatography of Basic CompoundsAssay (acidimetric) min. 98.0%
UV Absorbance of 0.25M Solution:
at 200 nm max. 0.2
at 2 10 nm max. 0.08
at 220 nm max. 0.06
at 230 nm max. 0.05
at 240 nm max. 0.05
at 250 nm max. 0.05
PRODUCT PACKING CONT.
NO. BOX
2841.0025 25 g Glass
2841.0100 100 g
A1-PentanolSee n-Amyl Alcohol
Penta
290
MediaWare No: 250 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 291 2-DEC-05 10:37:14 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
4806Perchloric Acid70% / ULTREX II Ultrapure Reagent
A HClO4
M = 1 00.46 g/mol
1 l = 1 .67 kg
CAS NO. 760 1 -90-3
EINECS 23 1 -5 12-4
NC CODE 28 1 1 1 9 80
EC NO. 1 7 006 00 4
UN/ID NO. 1 873
ADR/RID 5. 1 CO1
IMDG 5. 1 /I
R: 35-5-8
S: 23-26-36-45
1C
corrosive2
O
oxidizing
Certificate Provided Reporting Actual Lot AnalysisAssay 65-7 1%
Trace Impurities (in ppt) (pg/g):
Aluminium (Al) max. 100
Antimony (Sb) max. 100
Arsenic (As) max. 100
Barium (Ba) max. 100
Beryllium (Be) max. 100
Bismuth (Bi) max. 10
Cadmium (Cd) max. 10
Calcium (Ca) max. 100
Cerium (Ce) max. 10
Cesium (Cs) max. 10
Cobalt (Co) max. 100
Copper (Cu) max. 100
Dysprosium (Dy) max. 10
Erbium (Er) max. 10
Europium (Eu) max. 10
Gadolinium (Gd) max. 10
Gallium (Ga) max. 10
Hafnium (Hf) act. value reported
Holmium (Ho) max. 10
Indium (In) max. 10
Iron (Fe) max. 100
Lanthanum (La) max. 10
Lead (Pb) max. 10
Lithium (Li) max. 100
Lutetium (Lu) max. 10
Magnesium (Mg) max. 100
Manganese (Mn) max. 100
Molybdenum (Mo) max. 100
Neodymium (Nd) max. 10
Nickel (Ni) max. 100
Niobium (Nb) act. value reported
Palladium (Pd) max. 10
Platinum (Pt) max. 100
Potassium (K) max. 100
Praseodymium (Pr) max. 10
Rhodium (Rh) max. 10
Rubidium (Rb) max. 10
Samarium (Sm) max. 10
Scandium (Sc) max. 100
Silver (Ag) max. 100
Sodium (Na) max. 100
Strontium (Sr) max. 100
Tantalum (Ta) act. value reported
Tellurium (Te) max. 10
Terbium (Tb) max. 10
Thallium (Tl) max. 100
Thorium (Th) max. 10
Thulium (Tm) max. 10
Tin (Sn) max. 100
Titanium (Ti) max. 100
Tungsten (W) act. value reported
Uranium (U) max. 10
Vanadium (V) max. 100
Ytterbium (Yb) max. 10
Yttrium (Y) max. 10
Zinc (Zn) max. 100
Zirconium (Zr) max. 100
PRODUCT PACKING CONT.
NO. BOX
4806.0500 500 ml
Perch
291
MediaWare No: 251 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 292 2-DEC-05 10:37:14 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
6022Perchloric Acid70-72% / ’BAKER ANALYZED’ / ACS
A HClO4
M = 1 00.46 g/mol
1 l = 1 .67 kg
CAS NO. 760 1 -90-3
EINECS 23 1 -5 12-4
NC CODE 28 1 1 1 9 80
EC NO. 1 7 006 00 4
UN/ID NO. 1 873
ADR/RID 5. 1 OC1
IMDG 5. 1 /I
R: 35-5-8
S: 23-26-36-45
1C
corrosive2
O
oxidizing
Exceeds ACS SpecificationsAssay 70.0-72.0%
Chloride (Cl) max. 0.0003%
Color (APHA) max. 10
Free Chlorine max. 5 ppm
Insoluble in Ethanol max. 0.00 1%
Nitrogen Compounds (as N) max. 0.00 1%
Residue after Ignition max. 0.003%
Silicate and Phosphate (as SiO2) max. 5 ppm
Sulfate (SO4) max. 0.00 1%
Trace Impurities (in ppm):
Aluminium (Al) max. 0.05
Arsenic (As) max. 0.05
Barium (Ba) max. 0.02
Beryllium (Be) max. 0.0 1
Cadmium (Cd) max. 0.02
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0.3
Cobalt (Co) max. 0.0 1
Copper (Cu) max. 0.0 1
Germanium (Ge) max. 0.05
Heavy Metals (as Pb) max. 1
Iron (Fe) max. 1
Lead (Pb) max. 0.05
Lithium (Li) max. 0.0 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.0 1
Molybdenum (Mo) max. 0.02
Nickel (Ni) max. 0.05
Potassium (K) max. 0. 1
Silver (Ag) max. 0. 1 0
Sodium (Na) max. 0.5
Strontium (Sr) max. 0.0 1
Thallium (Tl) max. 0.05
Titanium (Ti) max. 0. 1
Vanadium (V) max. 0.0 1
Zinc (Zn) max. 0.05
Zirconium (Zr) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
6022.1000GL 1 l Glass 6
6022.2500 2.5 l 4
Perch
292
MediaWare No: 252 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 293 2-DEC-05 10:37:15 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
9653Perchloric Acid69-72 % / ’BAKER INSTRA-ANALYZED’ / for Trace Metal Analysis / ACS
A HClO4
M = 1 00.46 g/mol
1 l = 1 .67 kg
CAS NO. 760 1 -90-3
EINECS 23 1 -5 12-4
NC CODE 28 1 1 1 9 80
EC NO. 1 7 006 00 4
UN/ID NO. 1 873
ADR/RID 5. 1 CO1
IMDG 5. 1 /I
R: 35-5-8
S: 23-26-36-45
1C
corrosive2
O
oxidizing
Meets ACS SpecificationsAssay 69.0-72.0%
Color (APHA) max. 10
Manganese (Mn) (by AAS) max. 0.005 ppm
Residue after Ignition max. 10 ppm
Trace Impurities (in ppm):
Aluminium (Al) max. 0.05
Barium (Ba) max. 0. 1
Cadmium (Cd) max. 0.005
Calcium (Ca) max. 1
Chloride (Cl) max. 10
Chromium (Cr) max. 0.05
Cobalt (Co) max. 0.005
Copper (Cu) max. 0.05
Heavy Metals (as Pb) max. 0. 1
Iron (Fe) max. 0.05
Lead (Pb) max. 0.0 1
Lithium (Li) max. 0. 1
Magnesium (Mg) max. 0.05
Mercury (Hg) max. 0.005
Nickel (Ni) max. 0.005
Nitrogen Compounds (as N) max. 10
Potassium (K) max. 0.5
Silicate and Phosphate (as SiO2) max. 5
Silicon (Si) max. 0. 1
Silver (Ag) max. 0.005
Sodium (Na) max. 1
Strontium (Sr) max. 0.02
Sulfate (SO4) max. 10
Tin (Sn) max. 0.0 1
Zinc (Zn) max. 0.05
PRODUCT PACKING CONT.
NO. BOX
9653.0500 500 ml 6
Perch
293
MediaWare No: 253 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 294 2-DEC-05 10:37:15 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
6023Perchloric Acid60-62% / ’BAKER ANALYZED’ / ACS
A HClO4
M = 1 00.46 g/mol
1 l = 1 .54 kg
CAS NO. 760 1 -90-3
EINECS 23 1 -5 12-4
NC CODE 28 1 1 1 9 80
EC NO. 1 7 006 00 4
UN/ID NO. 1 873
ADR/RID 5. 1 CO1
IMDG 5. 1 /I
R: 35-5-8
S: 23-26-36-45
1C
corrosive2
O
oxidizing
Exceeds ACS SpecificationsAssay 60.0-62.0%
Chloride (Cl) max. 0.00 1%
Color (APHA) max. 10
Nitrogen Compounds (as N) max. 0.00 1%
Residue after Ignition max. 0.003%
Silicate and Phosphate (as SiO2) max. 5 ppm
Sulfate (SO4) max. 0.00 1%
Trace Impurities (in ppm):
Aluminium (Al) max. 0.05
Arsenic (As) max. 0.05
Barium (Ba) max. 0.02
Beryllium (Be) max. 0.0 1
Cadmium (Cd) max. 0.02
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0.3
Cobalt (Co) max. 0.0 1
Copper (Cu) max. 0.0 1
Germanium (Ge) max. 0.05
Heavy Metals (as Pb) max. 1
Iron (Fe) max. 1
Lead (Pb) max. 0.05
Lithium (Li) max. 0.0 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.0 1
Molybdenum (Mo) max. 0.02
Nickel (Ni) max. 0.05
Potassium (K) max. 0. 1
Silver (Ag) max. 0. 1 0
Sodium (Na) max. 0.5
Strontium (Sr) max. 0.0 1
Thallium (Tl) max. 0.05
Titanium (Ti) max. 0. 1
Vanadium (V) max. 0.0 1
Zinc (Zn) max. 0.05
Zirconium (Zr) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
6023.1000 1 l 6
6023.2500 2.5 l 4
7221Perchloric acid in anhydrous acetic acid0.5 mol/l / ’BAKER ANALYZED’
NC CODE 3822 00 00
UN/ID NO. 2789
ADR/RID 8 CF1
IMDG 8/II
R: 1 0-35
S: 23-26
1C
corrosive
Titer (mol/l) 0.49-0.5 1 PRODUCT PACKING CONT.
NO. BOX
7221.1000 1 l
Volumetric Solution, ready for use.
7142Perchloric acid in anhydrous acetic acid0.1 mol/l / ’BAKER ANALYZED’
NC CODE 3822 00 00
UN/ID NO. 2789
ADR/RID 8 CF1
IMDG 8/II
R: 1 0-35
S: 23-26
1C
corrosive
Titer (mol/l) 0.098-0. 102 PRODUCT PACKING CONT.
NO. BOX
7142.1000 1 l 6
Volumetric Solution, ready for use.
APerchloroethyleneSee Tetrachloroethylene
Perch
294
MediaWare No: 254 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 295 2-DEC-05 10:37:15 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
1366Periodic Acid’BAKER ANALYZED’
A H5IO6
M = 227.94 g/mol
CAS NO. 1 0450-60-9
EINECS 233-937-0
NC CODE 28 1 1 1 9 80
UN/ID NO. 3085
ADR/RID 5. 1 OC2
IMDG 5. 1 /I
R: 34-8
S: 26-36/37/39-45
1C
corrosive2
O
oxidizing
Assay min. 99.5%
Insoluble Matter max. 0.005%
Iodide (I) max. 0.00 1%
Residue after Ignition max. 0.5%
Sulfate (SO4) max. 0.0 1%
PRODUCT PACKING CONT.
NO. BOX
1366.0025 25 g Glass
1366.0100 100 g
9272Petroleum Ether20-40°C / ’BAKER ANALYZED’
1 l = 0.59 kg
FLASHPOINT −50 °C
CAS NO. 8032-32-4
EINECS 232-453-7
NC CODE 27 10 1 1 2 1
UN/ID NO. 1 268
ADR/RID 3 F 1
IMDG 3/II
R: 1 2-5 1 /53-65
S: 1 6-29-33-9
oN
dangerousfor theenvironment
0F+
extremelyflammable
4Xn
harmful
Acidity passes test
Appearance and Color passes test
Boiling Range 20-40°C
Heavy Oils and Fats passes test
Odor (faint) passes test
Residue after Evaporation max. 0.002%
PRODUCT PACKING CONT.
NO. BOX
9272.4000S 4 l Safetainer
9265Petroleum Ether30-60°C / ’BAKER ULTRA RESI-ANALYZED’ / for Organic Residue Analysis
1 l = 0.64 kg
FLASHPOINT −57 °C
CAS NO. 8032-32-4
EINECS 232-453-7
NC CODE 27 10 1 1 2 1
UN/ID NO. 1 268
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -38-5 1 /53-65-67
S: 1 6-23-24-29-33-6 1 -62-9
oN
dangerousfor theenvironment
4Xn
harmful0
F
highlyflammable
Boiling Range (initial to dry point) 30-60°C
Color (APHA) max. 10
Residue after Evaporation max. 5 ppm
Water (by KF, coulometric) max. 0.05%
ECD Sensitive Impurities (as Heptachlor Epoxide):
Single Impurity Peak (pg/ml) max. 10
FID-Sensitive Impurities (as 2-Octanol):
Single Impurity Peak (ng/ml) max. 5
Neat solvent front characterization: ECD-Sensitive
Impurities (as Ethylene Dibromide):
Single Impurity Peak (ng/ml) max. 5
PRODUCT PACKING CONT.
NO. BOX
9265.1000 1 l
9265.2500 2.5 l 4
9266Petroleum Ether30-60°C / ’BAKER ANALYZED’ / For Hydrocarbon Oil Index determination
1 l = 0.64 kg
FLASHPOINT −57 °C
CAS NO. 8032-32-4
EINECS 232-453-7
NC CODE 27 10 1 1 2 1
UN/ID NO. 1 268
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -38-5 1 /53-65-67
S: 1 6-23-24-29-33-6 1 -62-9
oN
dangerousfor theenvironment
4Xn
harmful0
F
highlyflammable
Color (APHA) max. 10
Residue after Evaporation max. 5 ppm
Water (H2O) max. 0.05%
Hydrocarbon oil index concentration (as RIVM oil
reference standard):
Total peaks between n-decane (C10H22)
and n-tetracontane (C40H82) max. 0.5 mg/l
PRODUCT PACKING CONT.
NO. BOX
9266.2500 2.5 l
Suitable for determination of Hydrocarbon Oil Index
according to ISO 9377-2 and NEN 5733.
Petro
295
MediaWare No: 255 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 296 2-DEC-05 10:37:16 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
9270Petroleum Ether35-60°C / ’BAKER ANALYZED’ / Ultraviolet Spectrophotometry
1 l = 0.64 kg
FLASHPOINT −57 °C
CAS NO. 8032-32-4
EINECS 232-453-7
NC CODE 27 10 1 1 2 1
UN/ID NO. 1 268
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -38-5 1 /53-65-67
S: 1 6-23-24-29-33-6 1 -62-9
oN
dangerousfor theenvironment
4Xn
harmful0
F
highlyflammable
Acidity passes test
Boiling Range 35-60°C
Color (APHA) max. 10
Residue after Evaporation max. 0.00 1%
Ultraviolet Absorbance (1.00-cm path vs water):
at 220 nm max. 1 .0
at 230 nm max. 0.20
at 250 nm max. 0.05
at 270 nm max. 0.0 1
at 400 nm max. 0.0 1
PRODUCT PACKING CONT.
NO. BOX
9270.1000 1 l
9270.4000 4 l Glass
8115Petroleum Ether40-65°C / ’BAKER ANALYZED’
1 l = 0.64 kg
FLASHPOINT −60 °C
CAS NO. 8032-32-4
EINECS 232-453-7
NC CODE 27 10 1 1 2 1
UN/ID NO. 1 268
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -38-5 1 /53-65-67
S: 1 6-23-24-29-33-6 1 -62-9
oN
dangerousfor theenvironment
4Xn
harmful0
F
highlyflammable
Boiling Range 40-65°C
Residue after Evaporation max. 0.00 1%
Water (H2O) max. 0.02%
Trace Impurities (in ppm):
Aluminium (Al) max. 0.5
Barium (Ba) max. 0. 1
Boron (B) max. 0.02
Cadmium (Cd) max. 0.05
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0.02
Cobalt (Co) max. 0.02
Copper (Cu) max. 0.02
Iron (Fe) max. 0. 1
Lead (Pb) max. 0. 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.02
Nickel (Ni) max. 0.02
Tin (Sn) max. 0. 1
Zinc (Zn) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
8115.1000 1 l
8115.5000 5 l EcoTainer
8115.9025 25 l
8115.9030RC 30 l Returnable Container
8115.9200 200 l
EcoTainer, the metal solvent can for more safety in the lab.
For safe handling of 25 l tin cans, see Self-closing tap.
8240Petroleum Ether40-65°C / ’BAKER’
1 l = 0.64 kg
FLASHPOINT −60 °C
CAS NO. 8032-32-4
EINECS 232-453-7
NC CODE 27 10 1 1 2 1
UN/ID NO. 1 268
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -38-5 1 /53-65-67
S: 1 6-23-24-29-33-6 1 -62-9
oN
dangerousfor theenvironment
4Xn
harmful0
F
highlyflammable
Appearance passes test
Residue after Evaporation max. 0.002%
Appearance at 0°C passes test
Distillation Range 40-65°C
PRODUCT PACKING CONT.
NO. BOX
8240.1000 1 l
8240.5000 5 l EcoTainer
8240.9025 25 l
8240.9200 200 l
EcoTainer, the metal solvent can for more safety in the lab.
For safe handling of 25 l tin cans, see Self-closing tap.
Petro
296
MediaWare No: 256 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 297 2-DEC-05 10:37:17 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
8116Petroleum Ether60-100°C / ’BAKER ANALYZED’
1 l = 0.67 kg
FLASHPOINT −32 °C
CAS NO. 8032-32-4
EINECS 232-453-7
NC CODE 27 10 1 1 2 1
UN/ID NO. 1 268
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -38-5 1 /53-65-67
S: 1 6-23-24-29-33-57-60-9
oN
dangerousfor theenvironment
4Xn
harmful0
F
highlyflammable
Boiling Range 60- 100°C
Residue after Evaporation max. 0.00 1%
Water (H2O) max. 0.02%
Trace Impurities (in ppm):
Aluminium (Al) max. 0.5
Barium (Ba) max. 0. 1
Boron (B) max. 0.02
Cadmium (Cd) max. 0.05
Calcium (Ca) max. 0.5
Chromium (Cr) max. 0.02
Cobalt (Co) max. 0.02
Copper (Cu) max. 0.02
Iron (Fe) max. 0. 1
Lead (Pb) max. 0. 1
Magnesium (Mg) max. 0. 1
Manganese (Mn) max. 0.02
Nickel (Ni) max. 0.02
Tin (Sn) max. 0. 1
Zinc (Zn) max. 0. 1
PRODUCT PACKING CONT.
NO. BOX
8116.1000 1 l
8116.5000 5 l EcoTainer
8116.9025 25 l
EcoTainer, the metal solvent can for more safety in the lab.
For safe handling of 25 l tin cans, see Self-closing tap.
8241Petroleum Ether60-100°C / ’BAKER’
1 l = 0.67 kg
FLASHPOINT −32 °C
CAS NO. 8032-32-4
EINECS 232-453-7
NC CODE 27 10 1 1 2 1
UN/ID NO. 1 268
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -38-5 1 /53-65-67
S: 1 6-23-24-29-33-57-60-9
oN
dangerousfor theenvironment
4Xn
harmful0
F
highlyflammable
Boiling Range 60- 100°C
Residue after Evaporation max. 0.002%
PRODUCT PACKING CONT.
NO. BOX
8241.9025 25 l
8241.9200 200 l
For safe handling of 25 l tin cans, see Self-closing tap.
8242Petroleum Ether80-1 10°C / ’BAKER’
1 l = 0.70 kg
FLASHPOINT −5 °C
CAS NO. 8032-32-4
EINECS 232-453-7
NC CODE 27 10 1 1 2 1
UN/ID NO. 1 268
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -38-5 1 /53-65-67
S: 1 6-23-24-29-33-57-60-6 1 -9
oN
dangerousfor theenvironment
4Xn
harmful0
F
highlyflammable
Boiling Range 80- 1 10°C
Residue after Evaporation max. 0.002%
PRODUCT PACKING CONT.
NO. BOX
8242.1000 1 l
8242.9025 25 l
Petro
297
MediaWare No: 257 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 298 2-DEC-05 10:37:17 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
8243Petroleum Ether100-140°C / ’BAKER’
1 l = 0.73 kg
FLASHPOINT 0 °C
CAS NO. 8032-32-4
EINECS 232-453-7
NC CODE 27 10 1 1 2 1
UN/ID NO. 1 268
ADR/RID 3 F 1
IMDG 3/II
R: 1 1 -38-5 1 /53-65-67
S: 1 6-23-24-29-33-57-60-9
oN
dangerousfor theenvironment
4Xn
harmful0
F
highlyflammable
Boiling Range 100- 140°C
Residue after Evaporation max. 0.002%
PRODUCT PACKING CONT.
NO. BOX
8243.1000 1 l
8243.5000 5 l EcoTainer
8243.9025 25 l
8243.9200 200 l
EcoTainer, the metal solvent can for more safety in the lab.
For safe handling of 25 l tin cans, see Self-closing tap.
APharmaceutical ProductsSee for detailed information section Pharmaceutical Products, page 36
11581,10-Phenanthroline monohydrate’BAKER ANALYZED’ / ACS
A C12H8N2.H2O
M = 1 98.23 g/mol
CAS NO. 66-7 1 -7
EINECS 200-629-2
NC CODE 2933 99 90
EC NO. 6 13 092 00 8
UN/ID NO. 28 1 1
ADR/RID 6. 1 T2
IMDG 6. 1 /III
R: 25-50/53
S: 45-60-6 1
oN
dangerousfor theenvironment
3T
toxic
Meets ACS SpecificationsSuitability as Redox Indicator passes test
Suitability for determining Iron passes test
PRODUCT PACKING CONT.
NO. BOX
1158.0005 5 g 6
1158.0025 25 g Glass
A1,10-Phenanthroline-Iron(II) Salt SolutionSee Ferroin Solution 1/40 M
13681,10-Phenanthrolinium Chloride 1aq’BAKER ANALYZED’
A C12H8N2HCl.H2O
M = 234.69 g/mol
CAS NO. 3829-86-5
EINECS 223-325- 1
NC CODE 2933 99 90
UN/ID NO. 28 1 1
ADR/RID 6. 1 T2
IMDG 6. 1 /III
R: 25
S: 45
3T
toxic
Assay min. 99%
Residue after Ignition max. 0.05%
Suitability as Redox Indicator passes test
Suitability for determining Iron passes test
Water (H2O) about 9%
PRODUCT PACKING CONT.
NO. BOX
1368.0005 5 g
1368.0025 25 g Glass
Petro
298
MediaWare No: 258 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 299 2-DEC-05 10:37:17 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
4056Phenolwhite fused crystal / ’BAKER ULTRAPURE BIOREAGENT’
A C6H5OH
M = 94. 1 1 g/mol
FLASHPOINT 79 °C
CAS NO. 1 08-95-2
EINECS 203-632-7
NC CODE 2907 1 1 00
EC NO. 604 00 1 00 2
UN/ID NO. 1 67 1
ADR/RID 6. 1 T2
IMDG 6. 1 /II
R: 24/25-34
S: 28-45
3T
toxic
Contains no preservativeSuitable for Extraction of Nucleic Acids:
Appearance passes test
Assay min. 99%
DNase Activity none detected
Heavy Metals (as Pb) max. 0.00 1%
Melting Point 39-4 1 °C.
pH (saturated) 4.5-6.0
RNase Activity none detected
Water (H2O) max. 0.4%
PRODUCT PACKING CONT.
NO. BOX
4056.0100 100 g
4056.0500 500 g
0188Phenolcrystal / ’BAKER ANALYZED’ / ACS
A C6H5OH
M = 94. 1 1 g/mol
FLASHPOINT 79 °C
CAS NO. 1 08-95-2
EINECS 203-632-7
NC CODE 2907 1 1 00
EC NO. 604 00 1 00 2
UN/ID NO. 1 67 1
ADR/RID 6. 1 T2
IMDG 6. 1 /II
R: 23/24/25-34-48/20/2 1 /22-68
S: 24/25-26-28C-36/37/39-45
1C
corrosive3
T
toxic
Exceeds ACS SpecificationsAssay (by GC) min. 99.0%
Clarity of Solution passes test
Freezing Point min. 40.5°C, dry basis
Residue after Evaporation max. 0.03%
Water (H2O) max. 0.2%
PRODUCT PACKING CONT.
NO. BOX
0188.0500 500 g
0188.1000 1 kg 6
0505Phenolcrystal / ’BAKER’
A C6H5OH
M = 94. 1 1 g/mol
FLASHPOINT 79 °C
CAS NO. 1 08-95-2
EINECS 203-632-7
NC CODE 2907 1 1 00
EC NO. 604 00 1 00 2
UN/ID NO. 1 67 1
ADR/RID 6. 1 T2
IMDG 6. 1 /II
R: 23/24/25-34-48/20/2 1 /22-68
S: 24/25-26-28C-36/37/39-45
1C
corrosive3
T
toxic
Assay 99.0- 100.5%
Acidity passes test
Appearance of solution passes test
Freezing Point min. 39.5°C
Identification passes test
Residue on Evaporation max. 0.05%
PRODUCT PACKING CONT.
NO. BOX
0505.1000 1 kg 6
0505.9025 25 kg
Stored in an airtight container.
Stored protected from light.
Pheno
299
MediaWare No: 259 File: ALFA_BRI-E Job: ALFA_BRI-E User: GV Page: 300 2-DEC-05 10:37:18 K
ABCDEFGHIJKLMNOPQRSTUVWXYZ
P
1480Phenolliquefied / ’BAKER ANALYZED’
A C6H5OH
M = 94. 1 1 g/mol
1 l = 1 . 1 0 kg
FLASHPOINT 79 °C
CAS NO. 1 08-95-2
EINECS 203-632-7
NC CODE 2907 1 1 00
EC NO. 604 00 1 00 2
UN/ID NO. 282 1
ADR/RID 6. 1 T2
IMDG 6. 1 /II
R: 23/24/25-34-48/20/2 1 /22-68
S: 24/25-26-28-36/37/39-45
1C
corrosive3
T
toxic
Assay (C6H5OH) min. 89.0%
Appearance passes test
Residue after Evaporation max. 0.05%
Solubility and Reaction passes test
Suitability for Amino Acid Determination passes test
Water (H2O) act. value reported
PRODUCT PACKING CONT.
NO. BOX
1480.0500 500 ml
Contains about 20 ppm Citric Acid as a Preservative.
Preserve in tight, light-resistant glass containers.
APhenolSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
1159Phenolphthalein’BAKER ANALYZED’ / ACS
A C6H4COOC(C6H4-OH)2
M = 3 18.33 g/mol
CAS NO. 77-09-8
EINECS 20 1 -004-7
NC CODE 2932 29 10
Meets ACS SpecificationsClarity of alcohol solution passes test
Visual Transition Interval:
pH 10.0 red
pH 8.0 colorless
PRODUCT PACKING CONT.
NO. BOX
1159.0100 100 g 6
APhenolphthaleinSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
7143Phenolphtalein1% solution in ethanol / ’BAKER ANALYZED’
1 l = 0.80 kg
FLASHPOINT 1 1 °C
NC CODE 2207 10 00
UN/ID NO. 1 1 70
ADR/RID 3 F 1
IMDG 3/II
R: 1 1
S: 1 6-7
0F
highlyflammable
Visual Transition Interval:
pH 10.0 red
pH 8.0 colorless
PRODUCT PACKING CONT.
NO. BOX
7143.0250 250 ml 6
Excluding excise.
Solution, ready for use.
AL-PhenylalanineSee for qualities meeting the requirements of cGMP, USP/NF, BP/Ph.Eur, JP or FCC, page 36
AN-PhenylanilineSee Diphenylamine
A(Phenylazo) formic Acid 2-PhenylhydrazideSee Diphenylcarbazone
APhenylmethanolSee Benzyl Alcohol
Pheno
300