2008 Sandvik DS420C Bolting Rig Rebuilt
16
ADN Group Management Pty Ltd t/as Global Equipment Solutions Suite 7 / 401 Oxford Street Mount Hawthorn, Western Australia 6016 PO Box 570, Floreat, 6014 Western Australia p: +61 (0) 8 9201 1142 | www.g-es.net | email: [email protected] ABN 28 593 584 022 | DL: MD23768 2008 Sandvik DS420C Bolting Rig Rebuilt Make Sandvik Model DS420 Year 2008 Hours 1850 As at 01/07/2021 Mileage km As at Serial/VIN 108B13355-1 Engine Serial Details 2008 Sandvik DS420C Bolting Rig Rebuilt. Showing 2 percussion hours and 1 hour on the compressor since rebuild, this bolting rig presents in exceptional condition with all items either rebuilt or new as per the scope of work available from GES. Offered for sale via online auction in "As Is" condition, running to drive on to buyers transport ex site Caboolture region, Qld. Australia. Asking price AUD Under review - call for pricing Ex site Australia, Queensland, Wamuran Service history Showing 2 percussion hours and 1 hour on the compressor since rebuild, this bolting rig presents in exceptional condition.
Transcript of 2008 Sandvik DS420C Bolting Rig Rebuilt
ADN Group Management Pty Ltd t/as Global Equipment SolutionsSuite 7 / 401 Oxford Street Mount Hawthorn, Western Australia 6016
PO Box 570, Floreat, 6014 Western Australiap: +61 (0) 8 9201 1142 | www.g-es.net | email: [email protected]
ABN 28 593 584 022 | DL: MD23768
2008 Sandvik DS420C Bolting Rig Rebuilt
Make Sandvik Model DS420Year 2008 Hours 1850 As at 01/07/2021Mileage km As atSerial/VIN 108B13355-1 Engine Serial
Details
2008 Sandvik DS420C Bolting Rig Rebuilt.Showing 2 percussion hours and 1 hour on the compressor since rebuild, this bolting rig presents in exceptional condition with all items either rebuilt or new as per the scope of work available from GES.Offered for sale via online auction in "As Is" condition, running to drive on to buyers transport ex site Caboolture region, Qld. Australia.
Asking price AUD Under review - call for pricingEx site Australia, Queensland, Wamuran
Service history
Showing 2 percussion hours and 1 hour on the compressor since rebuild, this bolting rig presents in exceptional condition.
ADN Group Management Pty Ltd t/as Global Equipment SolutionsSuite 7 / 401 Oxford Street Mount Hawthorn, Western Australia 6016
PO Box 570, Floreat, 6014 Western Australiap: +61 (0) 8 9201 1142 | www.g-es.net | email: [email protected]
ABN 28 593 584 022 | DL: MD23768
For further details, to make an offer or book an inspection, contactGlobal Equipment Solutions on Office: 08 9201 1142
ADN Group Management Pty Ltd t/as Global Equipment SolutionsSuite 7 / 401 Oxford Street Mount Hawthorn, Western Australia 6016
PO Box 570, Floreat, 6014 Western Australiap: +61 (0) 8 9201 1142 | www.g-es.net | email: [email protected]
ABN 28 593 584 022 | DL: MD23768
ADN Group Management Pty Ltd t/as Global Equipment SolutionsSuite 7 / 401 Oxford Street Mount Hawthorn, Western Australia 6016
PO Box 570, Floreat, 6014 Western Australiap: +61 (0) 8 9201 1142 | www.g-es.net | email: [email protected]
ABN 28 593 584 022 | DL: MD23768
ADN Group Management Pty Ltd t/as Global Equipment SolutionsSuite 7 / 401 Oxford Street Mount Hawthorn, Western Australia 6016
PO Box 570, Floreat, 6014 Western Australiap: +61 (0) 8 9201 1142 | www.g-es.net | email: [email protected]
ABN 28 593 584 022 | DL: MD23768
ADN Group Management Pty Ltd t/as Global Equipment SolutionsSuite 7 / 401 Oxford Street Mount Hawthorn, Western Australia 6016
PO Box 570, Floreat, 6014 Western Australiap: +61 (0) 8 9201 1142 | www.g-es.net | email: [email protected]
ABN 28 593 584 022 | DL: MD23768
ADN Group Management Pty Ltd t/as Global Equipment SolutionsSuite 7 / 401 Oxford Street Mount Hawthorn, Western Australia 6016
PO Box 570, Floreat, 6014 Western Australiap: +61 (0) 8 9201 1142 | www.g-es.net | email: [email protected]
ABN 28 593 584 022 | DL: MD23768
ADN Group Management Pty Ltd t/as Global Equipment SolutionsSuite 7 / 401 Oxford Street Mount Hawthorn, Western Australia 6016
PO Box 570, Floreat, 6014 Western Australiap: +61 (0) 8 9201 1142 | www.g-es.net | email: [email protected]
ABN 28 593 584 022 | DL: MD23768
ADN Group Management Pty Ltd t/as Global Equipment SolutionsSuite 7 / 401 Oxford Street Mount Hawthorn, Western Australia 6016
PO Box 570, Floreat, 6014 Western Australiap: +61 (0) 8 9201 1142 | www.g-es.net | email: [email protected]
ABN 28 593 584 022 | DL: MD23768
Model: DS420 Serial No: 108B13355-1
Year 1-May-08 Plant No: TBA
MOB: 0402 516 700 Eng Hrs: 1850
Percussion HR : 2 Compressor HR ` 1
Description Rebuilt/New
Cabin
Glass New
Drivers Console Rebuilt
Panels/ Switches Replaced as required
Mounts/CAB New
Door Handles New
Pressure Gauges /Lines New
Stainless Cab Yes
Gui Panel Rebuilt
Wiper Motors/ Arms New
Electrical
Trailing Cable Tested
HV Power Pck Rebuilt
High Voltage All Tested
Din Leads New
Front Harnesses New
Rear module Harnesses Replaced as required
Alternator New
Starter Motor New
Lights New
Engine / Cooling system
Cooler Pack Rebuilt
Induction Hoses New
Clamps New
Cooling hoses New
Drive Belt New
Turbo New
Exhaust system New
exhaust System clamps New
Belt Tensioner New
PowerTrain
Front Axel Rebuilt
Rear Axel Rebuilt
Transmission 1850HR
Drive Shafts Rebuilt
Breathers New
Sandvik 2008 DS420 Cable Bolter Scope
Hydraulics
Hydraulic Hoses New
SLU Rebuilt
Lift /Swing Cylinder Rebuilt
Jack Lef Cylinders Rebuilt
Feed Cylinder New
Zoom Cylinder Rebuilt
Rail Exstension Rebuilt
DPU Swing/ Tilt Cylinders Rebuilt
Rod Handler Cylinders Rebuilt/New
DCV Valves New
Hydraulic Cooler New
Front Module
HL510 Rebuilt
Feed Rail Inspected
Pins / Bushes New
Carousel/Rodhandler Rebuilt
Feed Beam SS strips New
Slide Bodys/ Slide pieces New
Feed Ropes New
Rollover Rebuilt
Pito Assembly Rebuilt
Grout Hose feeder Assymbly Rebuilt
Wire Feeder Assyembly Rebuilt
Zoom Buttons New
Zoom Wear plates New
Feed cylinder Guides and pulleys New
brake accumulators New
Grout Hose Reel Rebuilt
Grout Hose New
Pressure Cleaner /Hose Reel New
Form Oiler/Hose Reel New
Side Platforms Rebuilt
DPU Rebuilt
Rear Module
Center Hitch Pins / Bushes New
Compressor Rebuilt
A/C Unit Rebuilt
Water Boost Pump New
Fire Suppression System New
Tyres New ( Solid Filled)
Pressure Switches New
Water Hose Reel Rebuilt
Water Hose New
Cassete Swing Cylinder Rebuilt
Cassete Reel Rollers New
Cement Bowl Rebuilt
Bowl Dump Cylinder New
Cement Pump New
Bowl Extraction Fan/ Hose New
Hydraulic Cooler New
Paint
Decals New
Paint 2K New
Sand Blasted complete
Commission
2000HR Service Completed
1000V Tested Completed
Sandvik DS420Pioneer in cable bolting
Sandvik DS420
Available features
is a sophisticated cable bolting jumbo for rock re-inforcement inunderground mines and tunnels with small and medium cross sections.
Sandvik has the longest experience in making cable bolting rigs on the market, withmore than fifty units delivered around the world. This unit is a combination of provenlonghole drill components and innovative bolting solutions.
The full bolting cycle can be done safely by one operator located under the canopyor in soundproof, air-condtioned cabin. The correct water/cement ratio and hole locationcan be easily controlled by the operator. Automatic grout hose washing, bolting head oilerand easy mixer cleaning of the machine minimize maintenance time. The onboardinstrumentation with depth measurement for hole length, cement hose and steel strandensures high quality, long-lasting end result.
Max. cable bolt length 25 mAir-conditioned, soundproof cabinTC7 carrier with excellent serviceability
l
l
l
Sandvik DS420-C
www.sandvik.com
Main dimensions, Sandvik DS420
Bolting areas
3350
4540 3475
9285
12480
W1
W2
DS420
SANDVIK
360°
3190 (CBH-4)3495 (CBH-5)3800 (CBH-6)
55°35°
55°
25°
Sandvik DS420 series products
3.4 x 3.4 (11.2 x 11.2)
3.4 x 3.4 (11.2 x 11.2)
Cable (Steel strand)
Cable (Steel strand)
Up to 25 (82)
Up to 25 (82)
3.4 - 8.4 (11 - 28)
3.4 - 8.4 (11 - 28)
Canopy
Cabin
Min drift size
(height x width) / m (ft) Bolt type Bolt length / m (ft)
Working
height / m (ft)
DS420
DS420-C
Model Canopy / cabin
CBH-4
CBH-6CBH-5
4 ft5 ft6 ft
740080008400
340037004000
340037004000
RodLength
BoltingHead
H2 W1H1
H1 = Minimum operating height (mm)*H2 =W1 =W2 =
Maximum operating height (mm)Minimum operating width (mm)*Maximum operating width (mm)
89101012010730
W2
* included 100 mm clearance on each side of bolting head
80°
3270
3920
30°
30°
23°
35°5340
2050
1200
780
1700
H1
H2
1200zoom
600zoom
600zoom
