2008 Pricing Supplement · Thank you for acquiring Gagemaker’s September 2008 Price Supplement....

2008 Pricing Supplement

September 2008

Thank you for acquiring Gagemaker’s September 2008 Price Supplement. This booklet is a supplement to Gagemaker’s 2008 Product Catalog. It contains the prices for all of our products and services found in the catalog. INSTRUCTIONS In this booklet, the products are listed in alphanumeric order by model number. In addition to their price, the products are listed with their description and corresponding catalog page number for easy reference. As shown below, the catalog page number (Cat. Pg.) is the first column on the left. Then, the model number (Model No.) is the next column to the right and followed by the description. Finally, the last column contains the product price (Price Ea.) in US dollars ($).

Cat. Model Description Price Pg. No. Ea. (US$)

18 BXP-169 Go / NoGo Profile Gage BX-169 552.00


CALIBRATION AND REPAIR SERVICES Calibration and Repair Services prices are provided in the supplement. These prices are also found in easy-to-read tables on pages 45 and 46 of our 2008 product catalog. CONTACT If you have any questions about the layout, the products, or the pricing, please contact Gagemaker directly by phone, (713) 472-7360, or by email, [email protected]. Visit our website www.gagemaker.com for more information on any of our products, our company, or our contact information.


3 *Prices subject to change without notice*

42 863 Indicator- RG-7000 Series, TH-3004, TH-3006, TH-3008, TH-3009, TH-3010, SRG-7000, CA-9001, MRP-5000 Series, SPG-6000 .500”/.0005”

114.00

21 1014 Thread Height Standards- 8 & 10 Round Threads 144.00

21 1015 Thread Height Standards- 8 & 11½ Pitch “V” Threads 144.00

21 1017 Thread Height Standards- 13 3/8” & Smaller Buttress, ¾” TPF 97.00

21 1018 Thread Height Standards- 16” & Larger Buttress, 1” TPF 199.00

43 101214 Bezel Clamp Screw (Black “F” Type) 3.29

43 192683 Bezel Assembly (Black “F” Type) 17.95

43 193592 Bezel Clamp Washer 2.59

43 193690 Bezel Clamp Screw 1.95

43 900527 Mitutoyo Lifting Lever 27.95

21 1014S Thread Height Standards- 8 & 10 Round Threads (Crest to Pitchline “Shave”) 97.00

21 10322-RS Thread Height Standards- V.032, 2 TPF Rotary Shouldered Connectors, 6 TPI, to be used with T034 pt.

228.00


228.00


228.00

21 10403-RS Thread Height Standards- V-0.040, 3 TPF Rotary Connectors, 5 TPI, to be used with T034 pt.

228.00

42 1044SRGA (CONT) Indicator- Metric Mechanical 5mm 132.00

42 1045SGA (BAL) Indicator- Metric Mechanical 5mm 132.00


228.00


228.00

21 10551.5-RS Thread Height Standards- V-0.076, 1.5 TPF Rotary Shouldered Connection, 6TPI, to be used with T072 pt.

228.00

21 10761.5-RS Thread Height Standards- V-0.076, 1.5 TPF Rotary Shouldered Connection, 4 TPI to be used with T072 pt.

228.00

21 10H90-2 Thread Height Standards- 2” TPF H-90 Connection, 3.5 TPI, to be used with T072 pt. 228.00

21 10H90-3 Thread Height Standards- 3” TPF H-90 Connection, 3.5 TPI, to be used with T072 pt. 228.00

42 2047SGA (BAL) Indicator- Metric Mechanical 10mm 115.00

43 21AAB162 Bezel Clamp Screw 2.79

43 21AAB364 Bezel Clamp Washer 2.79

43 21AZB151 Mitutoyo Lifting Lever 27.95

43 21AZB161 Bezel Assembly (Blue “S” Type) 17.95

43 21AZB353 Bezel Assembly (Blue “S” Type) 17.95

43 21BA083 Bezel Clamp Washer (Black “F” Type) 2.97

43 21BAA147A Bezel Assembly (Black “F” Type) 17.95

43 21RZA065 Bezel Clamp Assembly (Blue “S” Type) 12.95

42 2358B-MRP Indicator- All MRP Gages 256.00

42 2358SGA Indicator- General Application Mechanical .500”/.0001” 256.00

42 2358SGRA Indicator- General Application Mechanical .500”/.0001” 256.00

42 2776FB Indicator- General Application Mechanical 1.00”/.0005” 172.00

42 2902SRGA (CONT) Indicator- Metric Mechanical 10mm 115.00

42 543-683B Indicator- Electronic/Digital .500”/.0005” 298.00

42 80-0400 Indicator- LG-5003, LG-5002 .025”/.0001” 212.00

42 80-0403 Indicator- LG-5003, LG-5002 .100”/.0005” 146.00

42 801 (BAL) Indicator- BR-2001 .250”/.001” 108.00

42 801I (BAL) Indicator- TH-3002R, TH-3002V .250”/.001” 108.00



42 802 (CONT) Indicator- WT-9000 Series .250”/.001” 108.00

42 802I (CONT) Indicator- TH-3001R, TH-3001V, PD-3003 .250”/.001” 108.00

42 803 (BAL) Indicator- PN-3000 Series, BX-1000, BXG-1000 .125”/.0005” 132.00

42 803I (BAL) Indicator- TH-3002B, TH-3003B, TS-4000 .125”/.0005” 132.00

42 805 (BAL) Indicator- General Application Mechanical .100”/.0005” 108.00

42 83-0582 Indicator- MRP-2000, MRP-2500, MRP-3000 .500”/.0005” 115.00

42 83-0584 Indicator- MRP-2000, MRP-2500, MRP-3000 .500”/.001” 115.00

42 862I (CONT) Indicator- IT-6001, PD-3004 .500”/.001” 113.00

42 862L (CONT) Indicator- ET-7000 Series w/ Lever .500”/.001” 136.00

42 863I (BAL) Indicator- PD-6000, PD-6001, PG-6000 Series, TS-1000, IT-5100, MRP-5500 .500”/.0005”

114.00

42 863L (BAL) Indicator- PD-8000 Series w/ Lever .500”/.0005” 136.00

42 87-070 Indicator- MRP-1000, MRP-1500 .125”/.0005” 132.00

42 882I (CONT) Indicator- IT-6000 1.00”/.001” 113.00

42 882L (CONT) Indicator- ET-7003, ET-7005, ET-7007 1.00”/.001” 136.00

43 A12517 Bezel Assembly 17.95

43 A225601 Bezel Clamp Washer 11.95

43 A22561 Bezel Clamp Screw 10.95

43 A22573 Bezel Assembly 17.95

9 AWH-100 Allen wrench holder with wrenches 97.00

40 BB-7000 Back-of-Box Seal Diameter Gage 844.00

26 Blade .008” Thickness, .170 Diameter Blade Point 37.00

41 BR-2001 Buttress Runout Gage 356.00

41 BRB-2001 Buttress Runout Base Only 306.00

41 BRS-2001 Buttress Runout Replacement Shoes (2) 116.00

41 BX-1000 6B Groove Diameter Gage w/ T188 Points, BX, R, RX Grooves to 13” 733.00

41 BX-900 Ball Mic Gage w/ .250 balls (no dial indicator) 2.6” - 13” diameter 533.00

41 BXG-1000 Groove width gage Groove widths, .376” - 1.5” 733.00

41 BXG-1002 Groove Width Gage, Groove Widths, 2.0” 816.00



























41 BX-R13 Optional extension rod for BX-1000, 13” Groove diameters to 13” 113.00




40 CA-9001 Coupling Alignment Gage 786.00

12 CAL-PAK Complete calibration package Includes: TF-1F, TF-IND, TF-DG, TF-CA, TF-SA, TF-TI, TF-SV, TF-SS, TF-VN, and storage case

2593.00

43 CASE-1 Standard Case, 16” X 11” X 3” Call43 CASE-2 Standard Case, 14” X 10” X 3” Call

43 CASE-3 Standard Case, 9” X 12½” 2¾” Call

43 CASE-4 Standard Case, 7” X 4” X 2” Call

43 CASE-5 Standard Case, 21½” X 14½” X 6⅝” Call

43 CASE-6 Standard Case, 8⅝” X 5⅝” X 3⅛” Call

43 CASE-7 Standard Case, 21” X 14” X 6” Call

43 CD-177-16 Lifting lever Left Hand 27.95

43 CD-177-R Lifting lever Right Hand 27.95

6 CERTIFI CERTIFI is a gage calibration software program 1250.00

45 CG-1001 Bench Calibrator Gage calibration 89.00

12 CG-1001 Bench Calibrator Gage, .0001” resolution, Mechanical 2328.00

12 CG-1001E Electronic Bench Calibrator Gage w/ SPC Output, .00005”/.001” mm Resolution, Digital

2772.00

39 CL-1001 CamLock Micrometer - 25°, 0” - 1” 737.00




45 CMM Contract Insp. CMM Contract Inspection 175.00

12 CRC-MT3000 Complete procedural documentation for the calibration of handheld inspection equipment including; O.D. & I.D. micrometers, calipers, depth micrometers, ring and plug gages, and more.

595.00

9 CRC-MT4000 Complete procedural documentation for the calibration of handheld inspection equipment including; O.D. & I.D. micrometers, calipers, depth micrometers, ring and plug gages, and more.

595.00

25 DB-1800 Internal deep reach bore gage 18” reach min. bore travel 1.700” 1260.0025 DB-2400 Internal deep reach bore gage 24” reach min. bore travel 1.700” 1996.00

18 DBBX-150 Dog Bone Ring Groove Gage BX-150 774.00


























18 DB-R20 Dog Bone Ring Groove Gage R-RX20 774.00



18 DB-R25 Dog Bone Ring Groove Gage RX-25 774.00




































38 DG-1000-B Blade Contact 109.00

38 DG-1000-GV Groove Locator, .100” thick 116.00

38 DG-1000-R16 16” Extension Arm 267.00


38 DG-1000-R36 Stabilizer for larger diameters 188.00


38 DG-1008 Depth Gage w/ digital display (in/mm), .0005” resolution, 0” - 8” 869.00



38 DG-1208 Depth Gage w/ digital display (in/mm), .0005” resolution, 0” - 8”, 12” base 869.00







45 Dial Indicators Calibration 39.00

14 DPG-1 Diameter extension arm 3.00” to 4.300” dia. 397.00

14 DPG-12R Handle extension assembly 12” reach 665.00






14 DPG-6000 Deep bore thread roll gage assembly for 4 pitch and finer threads only 3” to 4.300” dia., 6” reach

2628.00

14 DPG-6R Handle extension assembly 6” reach 598.0014 DPG-7 Diameter extension arm 8.300” to 9.100” dia. 442.00

14 DPG-8R Handle extension assembly 8” reach 598.00

26 E-Line Contact Point, .063 R, Extreme Line, TH-3003E 19.00

25 ET-7001 External Taper, ½” travel 0” - 6” 474.00


25 ET-7003 External Taper, 1” travel 0” - 10” 511.00





41 FSBX-150 Setting Master for BX-150 502.00












41 FSBX-160 Setting Master for BX-160 978.0041 FSBX-161 Setting Master for BX-161 1048.0041 FSBX-162 Setting Master for BX-162 1033.0041 FSBX-163 Setting Master for BX-163 1101.0041 FSBX-164 Setting Master for BX-164 1101.0041 FSBX-165 Setting Master for BX-165 1101.0041 FSBX-166 Setting Master for BX-166 1166.0041 FSBX-167 Setting Master for BX-167 1262.0041 FSBX-168 Setting Master for BX-168 1262.0041 FSBX-169 Setting Master for BX-169 798.0041 FSBX-170 Setting Master for BX-170 841.0041 FSBX-171 Setting Master for BX-171 869.0041 FSBX-172 Setting Master for BX-172 921.0041 FSBX-303 Setting Master for BX-303 1336.0033 FSTD-1034B-B Frame Style Setting Standard- 10¾” Buttress 574.0033 FSTD-1034B-P Frame Style Setting Standard- 10¾” Buttress 553.0033 FSTD-1034S-32-B Frame Style Setting Standard- 10¾” - 32.75# 8R STC 574.0033 FSTD-1034S-32-P Frame Style Setting Standard- 10¾” - 32.75# 8R STC 543.0033 FSTD-1034S-O-B Frame Style Setting Standard- 10¾” - Other 8R STC 574.0033 FSTD-1034S-O-P Frame Style Setting Standard- 10¾” - Other 8R STC 543.0033 FSTD-1134B-B Frame Style Setting Standard- 11¾” Buttress 582.0033 FSTD-1134B-P Frame Style Setting Standard- 11¾” Buttress 577.0033 FSTD-1134S-B Frame Style Setting Standard- 11¾” 8R STC 582.0033 FSTD-1134S-P Frame Style Setting Standard- 11¾” 8R STC 577.0033 FSTD-1338B-B Frame Style Setting Standard- 13⅜” Buttress 598.0033 FSTD-1338B-P Frame Style Setting Standard- 13⅜” Buttress 577.0033 FSTD-1338S-B Frame Style Setting Standard- 13⅜” 8R STC 598.0033 FSTD-1338S-P Frame Style Setting Standard- 13⅜” 8R STC 577.0033 FSTD-16B-B Frame Style Setting Standard- 16” Buttress 621.0033 FSTD-16B-P Frame Style Setting Standard- 16” Buttress 595.0033 FSTD-16S-B Frame Style Setting Standard- 16” 8R STC 621.0033 FSTD-16S-P Frame Style Setting Standard- 16” 8R STC 646.0033 FSTD-1858B-B Frame Style Setting Standard- 18⅝” Buttress 646.0033 FSTD-1858B-P Frame Style Setting Standard- 18⅝” Buttress 624.0033 FSTD-1858S-B Frame Style Setting Standard- 18⅝” 8R STC 646.0033 FSTD-1858S-P Frame Style Setting Standard- 18⅝” 8R STC 624.0033 FSTD-20B-B Frame Style Setting Standard- 20” Buttress 658.0033 FSTD-20B-P Frame Style Setting Standard- 20” Buttress 637.0033 FSTD-20L-B Frame Style Setting Standard- 20” 8R LTC 658.0033 FSTD-20L-P Frame Style Setting Standard- 20” 8R LTC 573.0033 FSTD-20S-B Frame Style Setting Standard- 20” 8R STC 658.0033 FSTD-20S-P Frame Style Setting Standard- 20” 8R STC 637.0033 FSTD-238E-B Frame Style Setting Standard- 2⅜” EUE 437.0033 FSTD-238E-P Frame Style Setting Standard- 2⅜” EUE 437.0034 FSTD-238IF-B Frame Style Setting Standard- 2⅜” API Internal Flush 580.0034 FSTD-238IF-P Frame Style Setting Standard- 2⅜” API Internal Flush 580.0033 FSTD-238N-B Frame Style Setting Standard- 2⅜” NUE 437.0033 FSTD-238N-P Frame Style Setting Standard- 2⅜” NUE 437.0034 FSTD-238PAC-B Frame Style Setting Standard- 2⅜” P.A.C. Connections 580.00



34 FSTD-238PAC-P Frame Style Setting Standard- 2⅜” P.A.C. Connections 580.0034 FSTD-238REG-B Frame Style Setting Standard- 2⅜” API Regular 580.0034 FSTD-238REG-P Frame Style Setting Standard- 2⅜” API Regular 580.0034 FSTD-238SH-B Frame Style Setting Standard- 2⅜” Hughes Slim Hole 580.0034 FSTD-238SH-P Frame Style Setting Standard- 2⅜” Hughes Slim Hole 580.0034 FSTD-238SL-B Frame Style Setting Standard- 2⅜” Hughes Slim Line H-90 580.0034 FSTD-238SL-P Frame Style Setting Standard- 2⅜” Hughes Slim Line H-90 580.0034 FSTD-23NC-B Frame Style Setting Standard- #23 API No. Connections 580.0034 FSTD-23NC-P Frame Style Setting Standard- #23 API No. Connections 580.0034 FSTD-26 NC-B Frame Style Setting Standard- #26 API No. Connections 580.0034 FSTD-26 NC-P Frame Style Setting Standard- #26 API No. Connections 580.0033 FSTD-278E-B Frame Style Setting Standard- 2⅞” EUE 437.0033 FSTD-278E-P Frame Style Setting Standard- 2⅞” EUE 437.0034 FSTD-278IF-B Frame Style Setting Standard- 2⅞” API Internal Flush 580.0034 FSTD-278IF-P Frame Style Setting Standard- 2⅞” API Internal Flush 580.0033 FSTD-278N-B Frame Style Setting Standard- 2⅞” NUE 437.0033 FSTD-278N-P Frame Style Setting Standard- 2⅞” NUE 437.0034 FSTD-278PAC-B Frame Style Setting Standard- 2⅞” P.A.C. Connections 580.0034 FSTD-278PAC-P Frame Style Setting Standard- 2⅞” P.A.C. Connections 580.0034 FSTD-278REG-B Frame Style Setting Standard- 2⅞” API Regular 580.0034 FSTD-278REG-P Frame Style Setting Standard- 2⅞” API Regular 580.0034 FSTD-278SH-B Frame Style Setting Standard- 2⅞” Hughes Slim Hole 580.0034 FSTD-278SH-P Frame Style Setting Standard- 2⅞” Hughes Slim Hole 580.0034 FSTD-278SL-B Frame Style Setting Standard- 2⅞” Hughes Slim Line H-90 580.0034 FSTD-278SL-P Frame Style Setting Standard- 2⅞” Hughes Slim Line H-90 580.0033 FSTD-312E-B Frame Style Setting Standard- 3½” EUE 457.0034 FSTD-312EH-B Frame Style Setting Standard- 3½” Hughes Extra Hole 597.0034 FSTD-312EH-P Frame Style Setting Standard- 3½” Hughes Extra Hole 597.0033 FSTD-312E-P Frame Style Setting Standard- 3½” EUE 457.0034 FSTD-312FH-B Frame Style Setting Standard- 3½” API Full Hole 597.0034 FSTD-312FH-P Frame Style Setting Standard- 3½” API Full Hole 597.0034 FSTD-312H90-B Frame Style Setting Standard- 3½” Hughes H-90 597.0034 FSTD-312H90-P Frame Style Setting Standard- 3½” Hughes H-90 597.0034 FSTD-312IF-B Frame Style Setting Standard- 3½” API Internal Flush 597.0034 FSTD-312IF-P Frame Style Setting Standard- 3½” API Internal Flush 597.0033 FSTD-312N-B Frame Style Setting Standard- 3½” NUE 457.0033 FSTD-312N-P Frame Style Setting Standard- 3½” NUE 457.0034 FSTD-312REG-B Frame Style Setting Standard- 3½” API Regular 597.0034 FSTD-312REG-P Frame Style Setting Standard- 3½” API Regular 597.0034 FSTD-312SH-B Frame Style Setting Standard- 3½” Hughes Slim Hole 597.0034 FSTD-312SH-P Frame Style Setting Standard- 3½” Hughes Slim Hole 597.0034 FSTD-312SL-B Frame Style Setting Standard- 3½” Hughes Slim Line H-90 597.0034 FSTD-312SL-P Frame Style Setting Standard- 3½” Hughes Slim Line H-90 597.0034 FSTD-31NC-B Frame Style Setting Standard- #31 API No. Connections 597.0034 FSTD-31NC-P Frame Style Setting Standard- #31 API No. Connections 597.0034 FSTD-35NC-B Frame Style Setting Standard- #35 API No. Connections 597.0034 FSTD-35NC-P Frame Style Setting Standard- #35 API No. Connections 597.0034 FSTD-38NC-B Frame Style Setting Standard- #38 API No. Connections 597.0034 FSTD-38NC-P Frame Style Setting Standard- #38 API No. Connections 597.0034 FSTD-40NC-B Frame Style Setting Standard- #40 API No. Connections 597.00



34 FSTD-40NC-P Frame Style Setting Standard- #40 API No. Connections 597.0033 FSTD-412B-B Frame Style Setting Standard- 4½” Buttress 498.0033 FSTD-412B-P Frame Style Setting Standard- 4½” Buttress 498.0033 FSTD-412E-B Frame Style Setting Standard- 4½” EUE 898.0034 FSTD-412EH-B Frame Style Setting Standard- 4½” Hughes Extra Hole 597.0034 FSTD-412EH-P Frame Style Setting Standard- 4½” Hughes Extra Hole 597.0033 FSTD-412E-P Frame Style Setting Standard- 4½” EUE 597.0034 FSTD-412FH-B Frame Style Setting Standard- 4½” API Full Hole 597.0034 FSTD-412FH-P Frame Style Setting Standard- 4½” API Full Hole 597.0034 FSTD-412H90-B Frame Style Setting Standard- 4½” Hughes H-90 597.0034 FSTD-412H90-P Frame Style Setting Standard- 4½” Hughes H-90 597.0034 FSTD-412IF-B Frame Style Setting Standard- 4½” API Internal Flush 597.0034 FSTD-412IF-P Frame Style Setting Standard- 4½” API Internal Flush 597.0033 FSTD-412L-B Frame Style Setting Standard- 4½” 8R LTC 498.0033 FSTD-412L-P Frame Style Setting Standard- 4½” 8R LTC 498.0033 FSTD-412N-B Frame Style Setting Standard- 4½” NUE 597.0033 FSTD-412N-P Frame Style Setting Standard- 4½” NUE 620.0034 FSTD-412REG-B Frame Style Setting Standard- 4½” API Regular 597.0034 FSTD-412REG-P Frame Style Setting Standard- 4½” API Regular 597.0033 FSTD-412S-9-B Frame Style Setting Standard- 4½” - 9.50# 8R STC 498.0033 FSTD-412S-9-P Frame Style Setting Standard- 4½” - 9.50# 8R STC 498.0034 FSTD-412SH-B Frame Style Setting Standard- 4½” Hughes Slim Hole 597.0034 FSTD-412SH-P Frame Style Setting Standard- 4½” Hughes Slim Hole 597.0033 FSTD-412S-O-B Frame Style Setting Standard- 4½” - Other 8R STC 498.0033 FSTD-412S-O-P Frame Style Setting Standard- 4½” - Other 8R STC 498.0034 FSTD-44NC-B Frame Style Setting Standard- #44 API No. Connections 597.0034 FSTD-44NC-P Frame Style Setting Standard- #44 API No. Connections 597.0034 FSTD-46NC-B Frame Style Setting Standard- #46 API No. Connections 597.0034 FSTD-46NC-P Frame Style Setting Standard- #46 API No. Connections 597.0034 FSTD-4FH-B Frame Style Setting Standard- 4” API Full Hole 597.0034 FSTD-4FH-P Frame Style Setting Standard- 4” API Full Hole 597.0034 FSTD-4H90-B Frame Style Setting Standard- 4” Hughes H-90 597.0034 FSTD-4H90-P Frame Style Setting Standard- 4” Hughes H-90 597.0034 FSTD-4IF-B Frame Style Setting Standard- 4” API Internal Flush 597.0034 FSTD-4IF-P Frame Style Setting Standard- 4” API Internal Flush 597.0034 FSTD-4SH-B Frame Style Setting Standard- 4” Hughes Slim Hole 597.0034 FSTD-4SH-P Frame Style Setting Standard- 4” Hughes Slim Hole 597.0034 FSTD-50NC-B Frame Style Setting Standard- #50 API No. Connections 680.0034 FSTD-50NC-P Frame Style Setting Standard- #50 API No. Connections 680.0033 FSTD-512B-B Frame Style Setting Standard- 5½” Buttress 526.0033 FSTD-512B-P Frame Style Setting Standard- 5½” Buttress 498.0034 FSTD-512FH-B Frame Style Setting Standard- 5½” API Full Hole 680.0034 FSTD-512FH-P Frame Style Setting Standard- 5½” API Full Hole 680.0034 FSTD-512H90-B Frame Style Setting Standard- 5½” Hughes H-90 680.0034 FSTD-512H90-P Frame Style Setting Standard- 5½” Hughes H-90 680.0034 FSTD-512IF-B Frame Style Setting Standard- 5½” API Internal Flush 680.0034 FSTD-512IF-P Frame Style Setting Standard- 5½” API Internal Flush 680.0033 FSTD-512L-B Frame Style Setting Standard- 5½” 8R LTC 526.0033 FSTD-512L-P Frame Style Setting Standard- 5½” 8R LTC 498.0034 FSTD-512REG-B Frame Style Setting Standard- 5½” API Regular 680.00



34 FSTD-512REG-P Frame Style Setting Standard- 5½” API Regular 680.0033 FSTD-512S-B Frame Style Setting Standard- 5½” 8R STC 526.0033 FSTD-512S-P Frame Style Setting Standard- 5½” 8R STC 498.0034 FSTD-56NC-B Frame Style Setting Standard- #56 API No. Connections 680.0034 FSTD-56NC-P Frame Style Setting Standard- #56 API No. Connections 680.0033 FSTD-5B-B Frame Style Setting Standard- 5” Buttress 519.0033 FSTD-5B-P Frame Style Setting Standard- 5” Buttress 498.0034 FSTD-5EH-B Frame Style Setting Standard- 5” Hughes Extra Hole 680.0034 FSTD-5EH-P Frame Style Setting Standard- 5” Hughes Extra Hole 680.0034 FSTD-5H90-B Frame Style Setting Standard- 5” Hughes H-90 680.0034 FSTD-5H90-P Frame Style Setting Standard- 5” Hughes H-90 680.0033 FSTD-5L-B Frame Style Setting Standard- 5” 8R LTC 519.0033 FSTD-5L-P Frame Style Setting Standard- 5” 8R LTC 498.0033 FSTD-5S-11-B Frame Style Setting Standard- 5” - 11.50# 8R STC 519.0033 FSTD-5S-11-P Frame Style Setting Standard- 5” - 11.50# 8R STC 498.0033 FSTD-5S-O-B Frame Style Setting Standard- 5” - Other 8R STC 519.0033 FSTD-5S-O-P Frame Style Setting Standard- 5” - Other 8R STC 498.0034 FSTD-61C-B Frame Style Setting Standard- #61 API No. Connections 680.0034 FSTD-61C-P Frame Style Setting Standard- #61 API No. Connections 680.0033 FSTD-658B-B Frame Style Setting Standard- 6⅝” Buttress 541.0033 FSTD-658B-P Frame Style Setting Standard- 6⅝” Buttress 516.0034 FSTD-658FH-B Frame Style Setting Standard- 6⅝” API Full Hole 680.0034 FSTD-658FH-P Frame Style Setting Standard- 6⅝” API Full Hole 680.0034 FSTD-658H90-B Frame Style Setting Standard- 6⅝” Hughes H-90 680.0034 FSTD-658H90-P Frame Style Setting Standard- 6⅝” Hughes H-90 680.0034 FSTD-658IF-B Frame Style Setting Standard- 6⅝” API Internal Flush 680.0034 FSTD-658IF-P Frame Style Setting Standard- 6⅝” API Internal Flush 680.0033 FSTD-658L-B Frame Style Setting Standard- 6⅝” 8R LTC 541.0033 FSTD-658L-P Frame Style Setting Standard- 6⅝” 8R LTC 516.0034 FSTD-658REG-B Frame Style Setting Standard- 6⅝” API Regular 680.0034 FSTD-658REG-P Frame Style Setting Standard- 6⅝” API Regular 680.0033 FSTD-658S-B Frame Style Setting Standard- 6⅝” 8R STC 541.0033 FSTD-658S-P Frame Style Setting Standard- 6⅝” 8R STC 516.0034 FSTD-70NC-B Frame Style Setting Standard- #70 API No. Connections 797.0034 FSTD-70NC-P Frame Style Setting Standard- #70 API No. Connections 797.0033 FSTD-758B-B Frame Style Setting Standard- 7⅝” Buttress 549.0033 FSTD-758B-P Frame Style Setting Standard- 7⅝” Buttress 529.0034 FSTD-758H90-B Frame Style Setting Standard- 7⅝” Hughes H-90 797.0034 FSTD-758H90-P Frame Style Setting Standard- 7⅝” Hughes H-90 797.0033 FSTD-758L-B Frame Style Setting Standard- 7⅝” 8R LTC 549.0033 FSTD-758L-P Frame Style Setting Standard- 7⅝” 8R LTC 476.0034 FSTD-758REG-B Frame Style Setting Standard- 7⅝” API Regular 797.0034 FSTD-758REG-P Frame Style Setting Standard- 7⅝” API Regular 797.0033 FSTD-758S-B Frame Style Setting Standard- 7⅝” 8R STC 549.0033 FSTD-758S-P Frame Style Setting Standard- 7⅝” 8R STC 529.0034 FSTD-77NC-B Frame Style Setting Standard- #77 API No. Connections 797.0034 FSTD-77NC-P Frame Style Setting Standard- #77 API No. Connections 797.0033 FSTD-7B-B Frame Style Setting Standard- 7” Buttress 544.0033 FSTD-7B-P Frame Style Setting Standard- 7” Buttress 520.0034 FSTD-7H90-B Frame Style Setting Standard- 7” Hughes H-90 797.0034 FSTD-7H90-P Frame Style Setting Standard- 7” Hughes H-90 797.0033 FSTD-7L-B Frame Style Setting Standard- 7” 8R LTC 544.0033 FSTD-7L-P Frame Style Setting Standard- 7” 8R LTC 468.00



33 FSTD-7S-17-B Frame Style Setting Standard- 7” - 17.00# 8R STC 544.0033 FSTD-7S-17-P Frame Style Setting Standard- 7” - 17.00# 8R STC 520.0033 FSTD-7S-O-B Frame Style Setting Standard- 7” - Other 8R STC 544.0033 FSTD-7S-O-P Frame Style Setting Standard- 7” - Other 8R STC 520.0033 FSTD-858B-B Frame Style Setting Standard- 8⅝” Buttress 554.0033 FSTD-858B-P Frame Style Setting Standard- 8⅝” Buttress 534.0034 FSTD-858H90-B Frame Style Setting Standard- 8⅝” Hughes H-90 797.0034 FSTD-858H90-P Frame Style Setting Standard- 8⅝” Hughes H-90 797.0033 FSTD-858L-B Frame Style Setting Standard- 8⅝” 8R LTC 554.0033 FSTD-858L-P Frame Style Setting Standard- 8⅝” 8R LTC 481.0034 FSTD-858REG-B Frame Style Setting Standard- 8⅝” API Regular 797.0034 FSTD-858REG-P Frame Style Setting Standard- 8⅝” API Regular 797.0033 FSTD-858S-24-B Frame Style Setting Standard- 8⅝” - 24.00# 8R STC 554.0033 FSTD-858S-24-P Frame Style Setting Standard- 8⅝” - 24.00# 8R STC 534.0033 FSTD-858S-O-B Frame Style Setting Standard- 8⅝” - Other 8R STC 554.0033 FSTD-858S-O-P Frame Style Setting Standard- 8⅝” - Other 8R STC 534.0033 FSTD-958B-B Frame Style Setting Standard- 9⅝” Buttress 563.0033 FSTD-958B-P Frame Style Setting Standard- 9⅝” Buttress 543.0033 FSTD-958L-B Frame Style Setting Standard- 9⅝” 8R LTC 563.0033 FSTD-958L-P Frame Style Setting Standard- 9⅝” 8R LTC 489.0033 FSTD-958S-B Frame Style Setting Standard- 9⅝” 8R STC 563.0033 FSTD-958S-P Frame Style Setting Standard- 9⅝” 8R STC 543.0025 IT-5104 Internal Taper & Groove Dia. Gage 4” Depth, 1½” - 10” Dia. 897.0025 IT-5104-04 Replacement Lower Arm 4¼” Length 219.0025 IT-5106 Internal Taper & Groove Dia. Gage 6” Depth, 1½” - 10” Dia. 928.0025 IT-5106-06 Replacement Lower Arm 6” Length 243.0025 IT-5108 Internal Taper & Groove Dia. Gage 8” Depth, 1½” - 10” Dia. 952.0025 IT-5108-08 Replacement Lower Arm 8” Length 277.0025 IT-5112 Internal Taper & Groove Dia. Gage 12” Depth, 1½” - 10” Dia. 995.0025 IT-5112-12 Replacement Lower Arm 12” Length 310.0024 IT-6000 Internal Taper Gage 4¼” Depth, 1½” - 9” Dia. 783.0024 IT-6000-07 Replacement Arm Set 4¼” Length 330.0024 IT-6001 Internal Taper Gage Any Depth, 4½” - 24” Dia. 483.0024 IT-6001-01C Cap - CDI Indicator 48.0024 IT-6001-01M Cap - Mitutoyo Indicator 48.0024 IT-6001-01-VM Short Cap 48.0024 IT-6001-04 Point Adapter .062” 29.0024 IT-6001-06 5” Extension .226 29.0024 IT-6001-07 5½” Extension .908” 29.0024 IT-6001-09 6⅝” Extension 2.030” 36.0024 IT-6001-10 7” Extension 2.400” 36.0024 IT-6001-11 7⅝” Extension 3.026” 36.0024 IT-6001-12 8⅝” Extension 4.032” 38.0024 IT-6001-13 9⅝” Extension 5.032” 38.0024 IT-6001-14 10¾” Extension 6.154” 38.0024 IT-6001-15 11¾” Extension 7.154” 42.0024 IT-6001-16 13⅜” Extension 8.781” 42.0024 IT-6001-VM Internal Seal diameter gage. 3.4275 Min dia. 253.00

45 Lead Gage Calibration 39.00

45 Lead Standards Calibration 43.00

22 LG-5002 2Pt. Lead gage ½” - 4” Thread leads 732.00



22 LG-5002-1 2Pt. Lead gage .0001 dia. ½” - 4” Thread leads 895.00

22 LG-5002-1J Lead Gage 2-point, Contact point spacing .193” 818.00

22 LG-5002-J Lead Gage 2-point, Contact point spacing .193” 732.00

22 LG-5003 3Pt. Lead gage ½” - 4” Thread leads 661.00

22 LG-5003-1 Lead gage 3-point, .0001 grad 818.00

22 LG-5003-1J Lead Gage 3-point, Contact point spacing .193” 818.00

22 LG-5003-J Lead Gage 3-point, Contact point spacing .193” 661.00

22 LG-5003-L Special Load to Load lead gage 1029.00

22 LG-5003-S Special Stab to Stab lead gage 1029.00

23 LS-1001 ¾” TPF, 8 & 10 TPI Lead Setting Standard 199.00

23 LS-1002 Straight, 8 & 10 TPI Lead Setting Standard 199.00

23 LS-1003 ¾” TPF, 11½ TPI Lead Setting Standard 199.00

23 LS-1004 Straight, 11½ TPI Lead Setting Standard 199.00

23 LS-1005 ¾” TPF, 5 TPI Lead Setting Standard 243.00

23 LS-1006 1” TPF, 5 TPI Lead Setting Standard 243.00




23 LS-1010 1½” TPF, 4 TPI Lead Setting Standard 243.00

23 LS-1011 2” TPF, 3½ TPI Lead Setting Standard 243.00

23 LS-1012 3” TPF, 3½ TPI Lead Setting Standard 243.00

23 LS-1013 1¼” TPF, 3 TPI Lead Setting Standard 243.00

23 LS-1027 1⅛” TPF, 5 TPI Lead Setting Standard 243.00

23 LS-1032 1⅛” TPF, 6 TPI Lead Setting Standard 243.00

23 LS-5001 1 - 5 pitch, 4” length 240.00

23 LS-5002 6 - 18 pitch, 4” length 240.00

45 MIC 360 Large Diameter gage calibration 289.00

39 MM-0-6 Minor diameter micrometer 0” - 6” 829.00

45 MRP Gages Calibration 47.00

45 MRP Standard Set Calibration 43.00

29 MRP-.625E External Thread Shoe, ⅝” long 58.00

29 MRP-.625I Internal Thread Shoe, ⅝” long 58.00

29 MRP-.875 Thread Shoe, ⅞” long 58.00

29 MRP-1.00 Thread Shoe, 1.00” long 58.00

28 MRP-1000 Internal / External PD Gage Internal 1½” - 4½”, External 1½” - 4½” 1100.00

28 MRP-1001 External Pitch Diameter Gage. 4½” reach, 1½” - 4½” dia. 1100.00

28 MRP-1000-45 Internal Seal Diameter Gage. Contacts on a 45° angle. ⅜" upper arms, ⅜" lower arms. Internal 1” - 4½”

1895.00

28 MRP-1007 Internal Seal Diameter Gage. Contacts on a 45° angle. Arms- .740" upper, ½" lower, Internal 1½” - 4½”

1895.00

28 MRP-1008 Internal Seal Diameter Gage. Contacts on a 45° angle. Arms- .740" upper, .740" lower, Internal 1½” - 4½”

1595.00

28 MRP-1009 Internal Seal Diameter Gage. Contacts on a 45° angle. Arms- .740" upper, .500" lower, Internal 1½” - 4½”

1595.00

28 MRP-1012-TSS Internal/External Pitch Diameter Gage with Standard Arm and Contact Points for Two Step Seal, 1½” to 4½” Dia.

1895.00

28 MRP-1012-TST Internal/External Pitch Diameter Gage, Extended Travel for Two Step Thread, 4½” Reach, 1½” to 4½” Dia.

1895.00

32 MRP-1034B-B 10¾” Buttress Rod Style Internal Setting Standards 160.0032 MRP-1034B-P 10¾” Buttress Rod Style External Setting Standards 142.00



32 MRP-1034S-32-B 10¾” - 32.75# 8R STC Rod Style Internal Setting Standards 160.00

32 MRP-1034S-32-P 10¾” - 32.75# 8R STC Rod Style External Setting Standards 142.00

32 MRP-1034S-O-B 10¾” - Other 8R STC Rod Style Internal Setting Standards 160.00

32 MRP-1034S-O-P 10¾” - Other 8R STC Rod Style External Setting Standards 142.00

29 MRP-10BL MRP 1000 Block Set 638.00

29 MRP-10KB-L MRP-1000 Knob - Long 5.00

29 MRP-10KB-S MRP-1000 Knob - Short 4.00

29 MRP-10LA MRP-1000 Lower Arm 88.00

29 MRP-10SLA MRP-1000 Special Arm 1” longer 94.00

29 MRP-10SP MRP-1000 Spring Plunger 9.00

29 MRP-10UA MRP-1000 Upper Arm 417.00

29 MRP-10WP MRP-1000 Wear Pad Set 156.00

32 MRP-1134B-B 11¾” Buttress Rod Style Internal Setting Standards 160.00

32 MRP-1134B-P 11¾” Buttress Rod Style External Setting Standards 142.00

32 MRP-1134S-B 11¾” 8R STC Rod Style Internal Setting Standards 160.00

32 MRP-1134S-P 11¾” 8R STC Rod Style External Setting Standards 142.00

32 MRP-1338B-B 13⅜” Buttress Rod Style Internal Setting Standards 160.00

32 MRP-1338B-P 13⅜” Buttress Rod Style External Setting Standards 142.00

32 MRP-1338S-B 13⅜” 8R STC Rod Style Internal Setting Standards 160.00

32 MRP-1338S-P 13⅜” 8R STC Rod Style External Setting Standards 142.00

28 MRP-1500 Internal/External PD Gage Internal 1½” - 4½” External 1½” - 4½” 1100.00

32 MRP-16B-B 16” Buttress Rod Style Internal Setting Standards 172.00

32 MRP-16B-P 16” Buttress Rod Style External Setting Standards 156.00

32 MRP-16S-B 16” 8R STC Rod Style Internal Setting Standards 172.00

32 MRP-16S-P 16” 8R STC Rod Style External Setting Standards 156.00

32 MRP-1858B-B 18⅝” Buttress Rod Style Internal Setting Standards 172.00

32 MRP-1858B-P 18⅝” Buttress Rod Style External Setting Standards 156.00

32 MRP-1858S-B 18⅝” 8R STC Rod Style Internal Setting Standards 172.00

32 MRP-1858S-P 18⅝” 8R STC Rod Style External Setting Standards 156.00

28 MRP-2001 External PD Gage, w/ 4¼” reach, 2⅜” - 20” 1200.00

28 MRP-2001-10 External PD Gage, w/ 10” reach, 2⅜” - 20” 1800.00

28 MRP-2001-7 External PD Gage, w/ 7” reach, 2⅜” - 20” 1500.00

28 MRP-2001-S External Pitch Diameter Gage. 4½” reach, Straight Arms 2⅜” - 20” dia 1200.00

28 MRP-2002 Internal PD Gage, w/ 4¼” reach, 2⅜” - 20” 1595.00

28 MRP-2002-10 Internal PD Gage, w/ 10” reach, 2⅜” - 20” 2195.00

28 MRP-2002-7 Internal PD Gage, w/ 7” reach, 2⅜” - 20” 1895.00

28 MRP-2002-S Internal Pitch Diameter Gage. 4½” reach, Straight Arms 2⅜” - 20” dia 1595.00

28 MRP-2003 Internal / External PD Gage, w/ 4¼” reach 1895.00

28 MRP-2003-10 Internal / External PD Gage, w/10” reach 2495.00

28 MRP-2003-7 Internal / External PD Gage, w/ 7” reach 2195.00

28 MRP-2003-S Internal/External Pitch Diameter Gage. 4½” reach, Straight Arms 2⅜” - 20” dia 1895.00

28 MRP-202 Internal ¾ TPF - Rolls not included 1100.00

32 MRP-20B-B 20” Buttress Rod Style Internal Setting Standards 172.00

29 MRP-20BL MRP-2000 Block Set 671.00

32 MRP-20B-P 20” Buttress Rod Style External Setting Standards 156.00

29 MRP-20KB MRP-2000 Knob 5.00

32 MRP-20L-B 20” 8R LTC Rod Style Internal Setting Standards 172.00

29 MRP-20LB-1 MRP-2000 Lower Block w/ 1” Hole 336.00



32 MRP-20L-P 20” 8R LTC Rod Style External Setting Standards 156.00

32 MRP-20S-B 20” 8R STC Rod Style Internal Setting Standards 172.00

29 MRP-20SP MRP-2000 Spring Plunger 9.00

32 MRP-20S-P 20” 8R STC Rod Style External Setting Standards 156.00


29 MRP-20WPEX MRP-2000 Extended Wear Pad Set 178.00

29 MRP-20WP-7 MRP-2000 Wear Pad Set, 7” reach 156.00

29 MRP-20WP-10 MRP-2000 Wear Pad Set, 10” reach 156.00


29 MRP-21LA-10 MRP-2001 10” Lower Arm 194.00



29 MRP-21UA-10 MRP-2001 10” Upper Arm 217.00








32 MRP-238EUE-B 2⅜” EUE Rod Style Internal Setting Standards 118.00

32 MRP-238EUE-P 2⅜” EUE Rod Style External Setting Standards 98.00

32 MRP-238NUE-B 2⅜” NUE Rod Style Internal Setting Standards 118.00

32 MRP-238NUE-P 2⅜” NUE Rod Style External Setting Standards 98.00

28 MRP-2511 External PD Gage, w/ 7” reach, 4½” - 9⅝” 1175.00

28 MRP-2511-7 External PD Gage, w/ 7” reach, 4½” - 9⅝” 1475.00

28 MRP-2512 Internal PD Gage, w/ 3⅜” reach, 4½” - 9⅝” 1565.00

28 MRP-2512-7 Internal PD Gage, w/ 7” reach, 4½” - 9⅝” 1865.00

28 MRP-2512-7 Internal PD Gage, w/ 10” reach, 4½” - 9⅝” 2165.00

28 MRP-2513 Internal / External PD Gage, w/ 3⅜” reach, 4½” - 9⅝” 1865.00

28 MRP-2521 External PD Gage, w/ 4” reach, 4½” - 13⅜” 1200.00

28 MRP-2522 Internal PD Gage, w/ 3⅜” reach, 4½” - 13⅜” 1595.00

28 MRP-2523 Internal / External PD Gage, w/ 3⅜” reach, 4½” - 13⅜” 1895.00

32 MRP-278EUE-B 2⅞” EUE Rod Style Internal Setting Standards 118.00

32 MRP-278EUE-P 2⅞” EUE Rod Style External Setting Standards 98.00

32 MRP-278NUE-B 2⅞” NUE Rod Style Internal Setting Standards 118.00

32 MRP-278NUE-P 2⅞” NUE Rod Style External Setting Standards 98.00

28 MRP-3001 External PD Gage, w/ 3⅜” reach, 8⅝” - 24” 2037.00

28 MRP-3002 Internal PD Gage, w/ 3⅜” reach, 8⅝” - 24” 2337.00

28 MRP-3003 Internal/External PD Gage, w/ 3⅜” reach, Internal 8⅝” - 24”, External 8⅝” - 24” 2547.00

28 MRP-3004 Internal/External PD Gage, w/ 3⅜” reach, Internal 20” - 36”, External 20” - 36” 2947.00

29 MRP-30RS-18 MRP-3000 Rail Set, 18” Max. 687.00

29 MRP-30RS-24 MRP-3000 Rail Set, 24” Max. 822.00


29 MRP-30WPEX MRP-3000 Extended Wear Pad Set 178.00

32 MRP-312EUE-B 3½” EUE Rod Style Internal Setting Standards 118.00

32 MRP-312EUE-P 3½” EUE Rod Style External Setting Standards 98.00

32 MRP-312NUE-B 3½” NUE Rod Style Internal Setting Standards 118.00



32 MRP-312NUE-P 3½” NUE Rod Style External Setting Standards 98.00

28 MRP-3501 External PD Gage w/ 6¼” reach 8⅝” - 24” 2037.00

28 MRP-3502 Internal PD Gage w/ 6¼” reach 8⅝” - 24” 2337.00

28 MRP-3503 Internal/External PD Gage w/ 6¼” reach Internal 8⅝” - 24” External 8⅝” - 24” 2547.00

32 MRP-412B-B 4½” Buttress Rod Style Internal Setting Standards 118.00

32 MRP-412B-P 4½” Buttress Rod Style External Setting Standards 98.00

32 MRP-412EUE-B 4½” EUE Rod Style Internal Setting Standards 118.00

32 MRP-412EUE-P 4½” EUE Rod Style External Setting Standards 98.00

32 MRP-412L-B 4½” 8R LTC Rod Style Internal Setting Standards 118.00

32 MRP-412L-P 4½” 8R LTC Rod Style External Setting Standards 98.00

32 MRP-412NUE-B 4½” NUE Rod Style Internal Setting Standards 118.00

32 MRP-412NUE-P 4½” NUE Rod Style External Setting Standards 98.00

32 MRP-412S-9-B 4½” - 9.50# 8R STC Rod Style Internal Setting Standards 118.00

32 MRP-412S-9-P 4½” - 9.50# 8R STC Rod Style External Setting Standards 98.00

32 MRP-412S-O-B 4½” - Other 8R STC Rod Style Internal Setting Standards 118.00

32 MRP-412S-O-P 4½” - Other 8R STC Rod Style External Setting Standards 98.00

32 MRP-4EUE-B 4” EUE Rod Style Internal Setting Standards 118.00

32 MRP-4EUE-P 4” EUE Rod Style External Setting Standards 98.00

32 MRP-4NUE-B 4” NUE Rod Style Internal Setting Standards 118.00

32 MRP-4NUE-P 4” NUE Rod Style External Setting Standards 98.00

30 MRP-5001 Internal/External Tubing and Casing 2⅜” - 5½” connectors, Internal Tool Joints 2759.00

30 MRP-5002 Internal/External Tubing and Casing, 2⅜” - 13⅜” connectors, Internal Tool Joints 2859.00

30 MRP-5003 Internal/External Tubing and Casing, 13⅜” - 20” connectors, Internal Tool Joints 3459.00

30 MRP-5004 Internal/External Tubing and Casing, 2⅜” - 9⅝” connectors, Internal Tool Joints Indicator .0001” resolution

2985.00

31 MRP-5012 Internal Tunneling Drill Pipe ¾” - 2” Diameter - Rolls not included 1950.00

30 MRP-501 External Sizes by Taper, Single Taper Gage, One set of rolls included 2192.00

30 MRP-502 Internal Sizes by Taper, Single Taper Gage, One set of rolls included 2192.00

30 MRP5-10 Positioning Springs (Set of 2) 9.00

30 MRP5-10T 1” TPF Taper Arms (Set of 2) 532.00

30 MRP5-11 Retainer Washers (Set of 2) 0.95

30 MRP5-12 Lock Screw (Set of 2) 0.95

30 MRP5-125T 1¼” TPF Taper Arms (Set of 2) 532.00

32 MRP-512B-B 5½” Buttress Rod Style Internal Setting Standards 118.00

32 MRP-512B-P 5½” Buttress Rod Style External Setting Standards 98.00

32 MRP-512L-B 5½” 8R LTC Rod Style Internal Setting Standards 118.00

32 MRP-512L-P 5½” 8R LTC Rod Style External Setting Standards 98.00

32 MRP-512S-B 5½” 8R STC Rod Style Internal Setting Standards 118.00

32 MRP-512S-P 5½” 8R STC Rod Style External Setting Standards 98.0030 MRP5-15T 1½” TPF Taper Arms (Set of 2) 532.0030 MRP5-20T 2” TPF Taper Arms (Set of 2) 532.0030 MRP5-30T 3” TPF Taper Arms (Set of 2) 532.0031 MRP-5501 External Tool Joints, 2⅜” - 4½” 2385.0031 MRP-5502 External Tool Joints, 4½” - 7⅝” 2475.0031 MRP-5503 External Tool Joints, 8⅝” 2685.0031 MRP-5512 External Tunneling Drill Pipe ¾” - 2” Diameter - Rolls not included 1950.0031 MRP55-125T 1¼” TPF Taper Arm 441.0031 MRP55-15T 1½” TPF Taper Arm 441.0031 MRP55-20T 2” TPF Taper Arm 441.00



31 MRP55-30T 3” TPF Taper Arm 441.0030 MRP5-75T ¾” TPF Taper Arms (Set of 2) 532.00

32 MRP-5B-B 5” Buttress Rod Style Internal Setting Standards 118.0032 MRP-5B-P 5” Buttress Rod Style External Setting Standards 98.0032 MRP-5L-B 5” 8R LTC Rod Style Internal Setting Standards 118.0032 MRP-5L-P 5” 8R LTC Rod Style External Setting Standards 98.0032 MRP-5S-11-B 5” - 11.50# 8R STC Rod Style Internal Setting Standards 118.0032 MRP-5S-11-P 5” - 11.50# 8R STC Rod Style External Setting Standards 98.0032 MRP-5S-O-B 5” - Other 8R STC Rod Style Internal Setting Standards 118.0032 MRP-5S-O-P 5” - Other 8R STC Rod Style External Setting Standards 98.0032 MRP-658B-B 6⅝” Buttress Rod Style Internal Setting Standards 133.0032 MRP-658B-P 6⅝” Buttress Rod Style External Setting Standards 113.0032 MRP-658L-B 6⅝” 8R LTC Rod Style Internal Setting Standards 133.0032 MRP-658L-P 6⅝” 8R LTC Rod Style External Setting Standards 113.0032 MRP-658S-B 6⅝” 8R STC Rod Style Internal Setting Standards 133.0032 MRP-658S-P 6⅝” 8R STC Rod Style External Setting Standards 113.0032 MRP-758B-B 7⅝” Buttress Rod Style Internal Setting Standards 133.0032 MRP-758B-P 7⅝” Buttress Rod Style External Setting Standards 113.0032 MRP-758L-B 7⅝” 8R LTC Rod Style Internal Setting Standards 133.0032 MRP-758L-P 7⅝” 8R LTC Rod Style External Setting Standards 113.0032 MRP-758S-B 7⅝” 8R STC Rod Style Internal Setting Standards 133.0032 MRP-758S-P 7⅝” 8R STC Rod Style External Setting Standards 113.0032 MRP-7B-B 7” Buttress Rod Style Internal Setting Standards 133.0032 MRP-7B-P 7” Buttress Rod Style External Setting Standards 113.0032 MRP-7L-B 7” 8R LTC Rod Style Internal Setting Standards 133.0032 MRP-7L-P 7” 8R LTC Rod Style External Setting Standards 113.0032 MRP-7S-17-B 7” - 17.00# 8R STC Rod Style Internal Setting Standards 133.0032 MRP-7S-17-P 7” - 17.00# 8R STC Rod Style External Setting Standards 113.0032 MRP-7S-O-B 7” - Other 8R STC Rod Style Internal Setting Standards 133.0032 MRP-7S-O-P 7” - Other 8R STC Rod Style External Setting Standards 113.0032 MRP-858B-B 8⅝” Buttress Rod Style Internal Setting Standards 146.0032 MRP-858B-P 8⅝” Buttress Rod Style External Setting Standards 123.0032 MRP-858L-B 8⅝” 8R LTC Rod Style Internal Setting Standards 146.0032 MRP-858L-P 8⅝” 8R LTC Rod Style External Setting Standards 123.0032 MRP-858S-24-B 8⅝” - 24.00# 8R STC Rod Style Internal Setting Standards 146.0032 MRP-858S-24-P 8⅝” - 24.00# 8R STC Rod Style External Setting Standards 123.0032 MRP-858S-O-B 8⅝” - Other 8R STC Rod Style Internal Setting Standards 146.0032 MRP-858S-O-P 8⅝” - Other 8R STC Rod Style External Setting Standards 123.0032 MRP-958B-B 9⅝” Buttress Rod Style Internal Setting Standards 146.0032 MRP-958B-P 9⅝” Buttress Rod Style External Setting Standards 123.0032 MRP-958L-B 9⅝” 8R LTC Rod Style Internal Setting Standards 146.0032 MRP-958L-P 9⅝” 8R LTC Rod Style External Setting Standards 123.0032 MRP-958S-B 9⅝” 8R STC Rod Style Internal Setting Standards 146.0032 MRP-958S-P 9⅝” 8R STC Rod Style External Setting Standards 123.0029 MRP-GSS MRP Gage Setting Stand 595.00

29 MRP-RAIL-12 MRP-2000 12” Cross Rail 78.00



44 MT-3012 Cal FL Calibration Force-Lok 12” 389.00

44 MT-3012 Cal NF Calibration Non Force-Lok 12” 319.00



44 MT-3012 w/ SLEC File Calibration 425.00

10 MT-3012-50 MIC TRAC Base Unit w/ DRO and TF-PL Blocks, Internal -0” to12”, External -1½” to 13½”

7950.00

10 MT-3012F-10-USBC High Resolution MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal - 0” to 12”, External -1½” to 13½”

12600.00

10 MT-3012F-50-USBC MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal - 0” to 12”, External -1½” to 13½”

11650.00

10 MT-3012F-50 MIC TRAC Base Unit w/ Force-Lok, DRO and TF-PL Blocks, Internal - 0” to 12”, External - 1½” to 13½”

8950.00




10 MT-3024-50 MIC TRAC Base Unit w/ DRO and TF-PL Blocks, Internal- 0” to 24”, External- 1½” to 25½”

9450.00

10 MT-3024F-10-USBC High Resolution MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal- 0” to 24”, External- 1½” to 25½”

14100.00

10 MT-3024F-50-USBC MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal- 0” to 24”, External- 1½” to 25½”

13150.00

10 MT-3024F-50 MIC TRAC Base Unit w/ Force-Lok, DRO and TF-PL Blocks, Internal - 0” to 24”, External -1½” to 25½”

10450.00

44 MT-3036 Cal FL Calibration Force-Lok 36” 527.0044 MT-3036 Cal NF Calibration Non Force-Lok 36” 457.0044 MT-3036 w/ SLEC File Calibration 549.00

10 MT-3036-50 MIC TRAC Base Unit w/ DRO and TF-PL Blocks, Internal- 0” to 36”, External 1½” to 37½”

13970.00

10 MT-3036F-10-USBC High Resolution MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks Internal- 0” to 36”, External- 1½” to 37½”

18628.00

10 MT-3036F-50-USBC MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks Internal- 0” to 36”, External- 1½” to 37½”

17678.00

10 MT-3036F-50 MIC TRAC Base Unit w/ Force-Lok, DRO and TF-PL Blocks, Internal- 0” to 36” External- 1½” to 37½”

14970.00


44 MT-3048 Cal NF Calibration Non Force-Lok 48” 527.0044 MT-3048 w/ SLEC File Calibration 721.00

10 MT-3048-50 MIC TRAC Base Unit w/ DRO and TF-PL Blocks, Internal- 0” to 48”, External 1½” to 49½”

23684.00


28334.00


27384.00

10 MT-3048F-50 MIC TRAC Base Unit w/ Force-Lok, DRO and TF-PL Blocks, Internal- 0” to 48”, External-1½” to 49½”

24684.00




10 MT-3060-50 MIC TRAC Base Unit w/ DRO and TF-PL Blocks, Internal- 0” to 60”, External- 1½” to 61½”

36021.00


40671.00


39721.00

10 MT-3060F-50 MIC TRAC Base Unit w/ Force-Lok, DRO and TF-PL Blocks, Internal- 0” to 60”, External- 1½” to 61½”

37021.00

10 MT-3090F-10-USBC MIC TRAC Base Unit w/ Desktop Computer, MT-4-USB, and TF-PL Blocks, Internal- 0” to 90”, External- 1½” to 61½”, Scale .00025um

48721.00

44 MT-4012 Calibration 12” 533.00



8 MT-4012-10 MIC TRAC Base Unit w/ digital readout software, desktop computer, andTF-2R Blocks, Internal- 0” to12”, External- 1½” to 13½”

22389.00

44 MT-4024 Calibration 24” 617.00

8 MT-4024-10 MIC TRAC Base Unit w/ digital readout software, desktop computer, and TF-2R Blocks Internal- 0” to 24”, External- 1½” to 25½”

25389.00

44 MT-4036 Calibration 36” 687.00

8 MT-4036-10 MIC TRAC Base Unit w/ digital readout software, desktop computer, and TF-2R Blocks, Internal- 0” to 36”, External- 1½” to 37½”

29389.00

44 MT-4048 Calibration 48” 899.00

8 MT-4048-10 MIC TRAC Base Unit w/ digital readout software, desktop computer, and TF-2R Blocks, Internal- 0” to 48”, External- 1½” to 49½”

36758.00

6 MT-4-USB w/Readout Digital readout software module with digital data acquisition card. 2297.0018 Overlay Overlays for above profile gages 132.0026 P-500 TH-3001R, Flat Face Contact 19.00

26 PA-45 45° Point adapter 34.00

20 PD-3000B Pit Depth Gage BASE ONLY 120.00

20 PD-3000BF Pit Depth Gage Flat BASE ONLY 120.00

20 PD-3000BF-6 Pit Depth Gage 6” Wide Flat BASE ONLY 170.00

20 PD-3000BV Pit Depth Gage V BASE ONLY 120.00

20 PD-3000BV-6 Pit Depth Gage 6” Wide V BASE ONLY 170.00

20 PD-3000BX Setting BX/BXG Gage, 1/2” x 1/2” U-notch 297.00

20 PD-3003 Pit Depth Gage, AGD #1, 0-100 170.00

20 PD-3004 Pit Depth Gage, AGD #2, 0-100 170.00

20 PD-3005 Pit Depth Gage w/ flat base, AGD #2, 0-100 170.00

20 PD-3006 Pit Depth Gage w/ 6” long flat base, AGD #2, 0-100 249.00

20 PD-3007 Pit Depth Gage w/ 6” long V base, AGD #2, 0-100 249.00

24 PD-6000 Internal pitch diameter gage (“V” & ACME) 1½” to 9” 838.00

24 PD-6000-02 Replacement arm set 2½” length 330.00

24 PD-6000-07 Replacement arm set 4½” length 330.00

24 PD-6001 Internal pitch diameter gage 6” to 24” 483.00

24 PD-6001-24E Internal pitch diameter gage extension rod 24” length 108.00

24 PD-6001-36E Internal pitch diameter gage extension rod 36” length 116.00

24 PD-6001-PD1 Contact point adapter 29.00

24 PD-6001-PD2 Adjustment cap 67.00

24 PD-6001-PD3 Adjustment cap lock nut 20.00

24 PD-6001-PD4C Cap - CDI Indicator 48.00

24 PD-6001-PD4M Cap - Mitutoyo Indicator 48.00

24 PD-6001-PDA Extension rod .430” 29.00

24 PD-6001-PDB Extension rod .860” 29.00

24 PD-6001-PDC Extension rod 1.290” 36.00

24 PD-6001-PDD Extension rod 1.720” 36.00

24 PD-6001-PDE Extension rod 3.440” 36.00

24 PD-6001-PDF Extension rod 5.590” 38.00

24 PD-6001-PDG Extension rod 7.740” 42.00

24 PD-6001-PDH Extension rod 10.320” 46.00

25 PD-8001 External ball pitch diameter gage 0” to 6” 521.00













26 PE-.300 Point extensions .300” 19.00

26 PE-.500 Point extensions .500” 19.0026 PE-.750 Point extensions .750” 19.0026 PE-1.00 Point extensions 1.000” 19.0043 PEL-1400 Pelican case 12¼” X 9¼” X 5¼” Call43 PEL-1450 Pelican case 15” X 10⅜” X 6” Call43 PEL-1500 Pelican case 17⅞” X 11¾” X 6⅛” Call43 PEL-1550 Pelican case 19⅞” X 13¼” X 7¾” Call43 PEL-1600 Pelican case 22” X 17” X 8” Call43 PEL-1700 Pelican case 36” X 13½” X 5” Call43 PEL-1750 Pelican case 50¾” X 13½” X 5” Call14 PG-6000 Internal thread roll gage 1½” to 9” 944.0014 PG-6000-17 Locking T-nut for arms 7.9514 PG-6000-SA Replacement arm set 2½” reach 297.0014 PG-6000-XA Extended reach arm set 4½” reach 398.0014 PG-6001 Internal thread roll gage 9” to 16” 1026.0014 PG-6002 Internal thread roll gage 16” to 24” 1257.0014 PG-6003 Internal Thread roll gage 24” to 32” 1997.008 PGC-12-W2 Precision Calibration Package 29997.008 PGC-24-W2 Above calibration package with MT-4024-10 MIC TRAC 0” - 24” range 32997.008 PGC-36-W2 Above calibration package with MT-4036-10 MIC TRAC 0” - 36” range 36997.008 PGC-48-W2 Above calibration package with MT-4048-10 MIC TRAC 0” - 48” range 44366.0037 PN-3000/T.04087 Pin Seal Standoff Plate, 0.04087” (1.038 mm) thick 217.0037 PN-3000/T.044 Pin Seal Standoff Plate, 0.0440” (1.12 mm) thick 217.0037 PN-3000/T.0472 Pin Seal Standoff Plate, 0.0472” (1.20 mm) thick 217.0037 PN-3000/T.0591 Pin Seal Standoff Plate, 0.0591” (1.50 mm) thick 217.0037 PN-3000/T.064 Pin Seal Standoff Plate, 0.0640” (1.62 mm) thick 217.0037 PN-3000/T.072 Pin Seal Standoff Plate, 0.0720” (1.83 mm) thick 217.0037 PN-3000/T.0748 Pin Seal Standoff Plate, 0.0748” (1.90 mm) thick 217.0037 PN-3000/T.078 Pin Seal Standoff Plate, 0.0780” (1.9812 mm) thick 217.0037 PN-3000/T.0787 Pin Seal Standoff Plate, 0.0787” (2.00 mm) thick 217.0037 PN-3000/T.0811 Pin Seal Standoff Plate, 0.0811” (2.06 mm) thick 217.0037 PN-3000/T.0815 Pin Seal Standoff Plate, 0.0815” (2.07 mm) thick 217.0037 PN-3000/T.094 Pin Seal Standoff Plate, 0.0940” (2.39” mm) thick 217.0037 PN-3000/T.100 Pin Seal Standoff Plate, 0.1000” (2.54 mm) thick 217.0037 PN-3000/T.114 Pin Seal Standoff Plate, 0.1140” (2.90 mm) thick 217.0037 PN-3000/T.1181 Pin Seal Standoff Plate, 0.1181” (3.00 mm) thick 217.0037 PN-3000/T.121 Pin Seal Standoff Plate, 0.1210” (3.07 mm) thick 217.0037 PN-3000/T.122 Pin Seal Standoff Plate, 0.1220” (3.10 mm) thick 217.0037 PN-3000/T.1221 Pin Seal Standoff Plate, 0.1221” (3.10 mm) thick 217.0037 PN-3000/T.1378 Pin Seal Standoff Plate, 0.1378” (3.50 mm) thick 217.0037 PN-3000/T.171 Pin Seal Standoff Plate, 0.1710” (4.34 mm) thick 217.0037 PN-3000/T.1969 Pin Seal Standoff Plate, 0.1969” (5.00 mm) thick 217.00



37 PN-3000/T.200 Pin Seal Standoff Plate, 0.2000” (5.08 mm) thick 217.0037 PN-3000/T.3149 Pin Seal Standoff Plate, 0.3149” (8.00 mm) thick 247.0037 PN-3000/T.350 Pin Seal Standoff Plate, 0.3500” (8.89 mm) thick 247.0036 PN-3001 Pin Nose Diameter Gage, (0” - 5.750”) 983.0036 PN-3002 Pin Nose Diameter Gage, (0” - 9.750”) 1011.0036 PN-3003 Pin Nose Diameter Gage, (0” - 13.750”) 1039.0037 PN-31VM-30 30° Internal/External Apex Seal Diameter “V”, Int. 2⅜” - 6⅝”/ Ext. 4” - 6⅝” 1798.0037 PN-33VM-30 30° Internal/External Apex Seal Diameter “V”, Int. 2⅜” - 14”/ Ext. 4” - 14” 2217.0036 PNA-3001-VMA 30° External Apex Diameter Gage, Anvils 2⅜” - 5½” 1886.00

36 PNA-3002-VMA 30° External Apex Diameter Gage, Anvils 6” - 9⅝” 1908.00

36 PNA-3003-VMA 30° External Apex Diameter Gage, Anvils 10” - 13⅜” 1930.00

36 PNI-3001-VMB Internal “Ball Contact” Seal Diameter Gage 2⅜” - 5½” 1441.00

36 PNI-3002-VMB Internal “Ball Contact” Seal Diameter Gage 6” - 9⅝” 1463.00

36 PNI-3003-VMB Internal “Ball Contact” Seal Diameter Gage, 10” - 13⅜” 1486.00

37 PNS-3000 Pin Nose Gage Setting Standard, 2⅜” - 13⅜” 528.00

45 Profile Gage Calibration 34.00

40 PT-4000 Power Tight Make-up Gage 231.00

26 RC-375 .375” Dia. Roller Contact 34.00

14 RG-7000 External thread roll gage 1” to 4” 836.00

45 RG-7000, PG-6000 Diameter gage calibration 89.00






19 RP-310-469 R-RX Groove Profile R23 to R45, R49, R53, R57, R65, R69, R82, R84, & R99 552.00

19 RP-440-656 R-RX Groove Profile R50, R54, R66, R86, R87 552.00

19 RP-500-781 R-RX Groove Profile R47, R70, R74, R88 552.00

19 RP-620-1063 R-RX Groove Profile R63 552.00


19 RP-250-344 R-RX Groove Profile R 20 552.00

19 RP-380-531 R-RX Groove Profile R46, R73, R85, 552.00


26 S021 0.021” Dia. Contact Point 53.00










26 S105T 0.105” Dia. Contact Point 34.00









40 SE-1000 Straight Edge 1285.00

40 SES-1000 Replacement Straight Edge Standard 837.00

40 SG-8001 Saddle Gage 798.00

21 SL-H90 1.25 TPF, 3 TPI to be used with T072 pt. 228.00

17 SP-032 Pitch Diameter Contact Point, 18 - 20 pitch 18.75

17 SP-032 Pitch Diameter Contact Point, 1 - 1.25mm pitch 18.75

17 SP-032T Pitch Diameter Contact Point,16 pitch 34.00

17 SP-041 Pitch Diameter Contact Point, 13 -16 pitch 18.75

17 SP-041 Pitch Diameter Contact Point, 1.5 - 2mm pitch 18.75

17 SP-041T Pitch Diameter Contact Point, 12 - 14 pitch 34.00

17 SP-050 Pitch Diameter Contact Point, 11.5 - 12 pitch 18.75

17 SP-050T Pitch Diameter Contact Point, 10 pitch 34.00

17 SP-057 Pitch Diameter Contact Point, 10 pitch 18.75

17 SP-057 Pitch Diameter Contact Point, 2.5mm pitch 18.75



17 SP-072 Pitch Diameter Contact Point, 3.5 - 3mm pitch 18.75



17 SP-096 Pitch Diameter Contact Point, 4 - 4.25mm pitch 18.75

17 SP-105 Pitch Diameter Contact Point, 5 pitch 18.75

17 SP-105 Pitch Diameter Contact Point, 4.5 - 4.75mm pitch 18.75


17 SPA-265 Pitch Diameter Contact Point Arms, .265” dia., 1” long 219.00

17 SPA-375 Pitch Diameter Contact Point Arms,.375” dia., 1.25” long 219.00

17 SPA-437 Pitch Diameter Contact Point Arms,.437” dia., 1.50” long 219.00

45 Spec Long Form Cert Special Long Form Certificates 35.00

16 SPG-6000 Internal Thread Roll/Pitch Diameter Gage 5/8” to 1½” 786.00

16 SRMI-175P ISO Metric Thread Rolls, 1.75mm pitch 389.00


16 SRMI-2P ISO Metric Thread Rolls, 2mm pitch 389.00




16 SRVI-10P UN Series Thread Rolls, 10 pitch internal 60° “V” 389.00














16 SRVI-7P UN Series Thread Rolls, 7 pitch internal 60° “V” 389.0016 SRVI-8P UN Series Thread Rolls, 8 pitch internal 60° “V” 389.0016 SRVI-9P UN Series Thread Rolls, 9 pitch internal 60° “V” 389.0039 ST-7001 Indicator Standoff Gage and Setting Standard, .615” - .635” 1008.0039 STS-7001 Setting Standard Replacement, .625” width 499.00

26 T021 0.021” Dia. Contact Point 53.00


27 T03125T 0.032” Dia. Contact Point, Truncated 34.00




27 T041T 0.041” Dia. Contact Point, Truncated 34.0026 T043 0.043” Dia. Contact Point 22.0026 T044 0.044” Dia. Contact Point 22.0026 T045 0.045” Dia. Contact Point 22.0026 T050 0.050” Dia. Contact Point 22.0027 T050T 0.050” Dia. Contact Point, Truncated 34.0026 T057 0.057” Dia. Contact Point 22.0026 T059 0.059” Dia. Contact Point 22.0026 T060 0.060” Dia. Contact Point 22.0026 T062 0.062” Dia. Contact Point 22.0027 T0625T 0.062” Dia. Contact Point, Truncated 34.0026 T068 0.068” Dia. Contact Point 22.0026 T071 0.071” Dia. Contact Point 22.0026 T072 0.072” Dia. Contact Point 22.0027 T072T 0.072” Dia. Contact Point, Truncated 34.0027 T082 0.082” Dia. Contact Point 22.0026 T086 0.086” Dia. Contact Point 22.0026 T087 0.087” Dia. Contact Point 22.0026 T090 0.090” Dia. Contact Point 22.0027 T090T 0.090” Dia. Contact Point, Truncated 34.0026 T092 0.092” Dia. Contact Point 22.0026 T096 0.096” Dia. Contact Point 22.0026 T098 0.098” Dia. Contact Point 22.0026 T100 0.100” Dia. Contact Point 22.0027 T105T 0.105” Dia. Contact Point, Truncated 34.0026 T115 0.115” Dia. Contact Point 22.0026 T116 0.116” Dia. Contact Point 22.0026 T118 0.118” Dia. Contact Point 22.0026 T125 0.125” Dia. Contact Point 22.0026 T128 0.128” Dia. Contact Point 22.0027 T128T 0.128” Dia. Contact Point, Truncated 34.0026 T1335 0.1335” Dia. Contact Point 22.0026 T144 0.144” Dia. Contact Point 22.0027 T144T 0.144” Dia. Contact Point, Truncated 34.0026 T150 0.150” Dia. Contact Point 22.0026 T155 0.155” Dia. Contact Point 22.0026 T156 0.156” Dia. Contact Point 22.0026 T157 0.157” Dia. Contact Point 22.0026 T160 0.160” Dia. Contact Point 22.0026 T165 0.165” Dia. Contact Point 22.0026 T176 0.176” Dia. Contact Point 22.00



27 T1875T 0.188” Dia. Contact Point, Truncated 43.0026 T188 0.188” Dia. Contact Point 23.0026 T200 0.200” Dia. Contact Point 23.0027 T219T 0.219” Dia. Contact Point, Truncated 43.0026 T235 0.235” Dia. Contact Point 23.0026 T250 0.250” Dia. Contact Point 23.0026 T266 0.266” Dia. Contact Point 23.0027 T266T 0.266” Dia. Contact Point, Truncated 43.0027 T288 0.288” Dia. Contact Point 37.0026 T295 0.295” Dia. Contact Point 37.0026 T300 0.300” Dia. Contact Point 37.0026 T325 0.325” Dia. Contact Point 37.0026 T344 0.344” Dia. Contact Point 37.0027 T344T 0.344” Dia. Contact Point, Truncated 43.0026 T350 0.350” Dia. Contact Point 37.0026 T360 0.360” Dia. Contact Point 37.0026 T375 0.375” Dia. Contact Point 37.0026 T430 0.430” Dia. Contact Point 37.0026 T4375 0.4375” Dia. Contact Point 37.0026 T475 0.475” Dia. Contact Point 37.0026 T500 0.500” Dia. Contact Point 37.0026 T500C 50° Cone, V -Threads, TH-3001V, TH-3002V, TH-3004 19.0026 T501 50° Cone, Self-centering, TH-3001R, TH-3002R 19.0026 T502 Self-centering sleeve for use with T501, T503 19.0026 T503 50° Cone, V-Threads, TH-3006 19.0027 T531T 0.531” Dia. Contact Point 59.0027 T5625 0.5625” Dia. Contact Point 37.0026 T625 0.625” Dia. Contact Point 37.0026 T750 0.750” Dia. Contact Point 37.004 TDWIN Thread Disk for Windows® software program 425.005 TDWIN-2-Taper Thread Disk for Taper Threads Software Call5 TDWIN-2-Taper-LIC10 Floating site license agreement, 10 users Call5 TDWIN-2-Taper-LIC5 Floating site license agreement, 5 users Call4 TDWIN-LIC10 Floating site license agreement, 10 users 2242.004 TDWIN-LIC5 Floating site license agreement, 5 users 1297.004 TDWIN-RP TDWIN Replacement disk 53.004 TDWIN-UP Upgrade to TDWIN from TD-100 225.0011 TF-.5F Carbide Flat Face Setting Blocks (1.000” outside dim.) 885.0011 TF-.75T ¾” Taper Blocks, 8 & 10 Round, ¾” TPF Buttress, Line Pipe 958.0011 TF-1.0T 1” Taper Blocks, 1” TPF Buttress 958.0011 TF-1.12T 1⅛” Taper Blocks, 1.125 TPF Connectors 958.0011 TF-1.25RSC 1¼” Taper Blocks, 1.25 TPF Rotary Shouldered Connectors 958.0011 TF-1.5RSC 1½” Taper Blocks, 1.50 TPF Rotary Shouldered Connectors 958.0011 TF-1.75T 1¾” Taper Blocks, 1.75 TPF Connectors 958.0011 TF-10 Tapered setting blocks 10° half angle 547.0011 TF-15 Tapered setting blocks 15° half angle 547.0011 TF-1F Flat face setting block set (2 blocks) 1.5000” outside dimension (also on pg. 12) 496.0045 TF-1F, TF-2R-CAL Setting Blocks calibration 59.0011 TF-1F-T Flat face setting blocks to accept riser block (T-Shape) 886.0011 TF-1V 1-5 pitch 60° “V” thread setting blocks 547.0011 TF-2.0RSC 2” Taper Blocks, 2.0 TPF Rotary Shouldered Connectors 958.0011 TF-20 Tapered setting blocks 20° half angle 547.009 TF-2R ⅜” dia. carbide anvil set 886.0011 TF-2V 6-20 pitch 60° “V” thread setting blocks 547.00



11 TF-3.0RSC 3” Taper Blocks, 3.0 TPF Rotary Shouldered Connectors 958.0011 TF-30 Tapered setting blocks 30° half angle 547.0011 TF-45 Tapered setting blocks 45° half angle 547.0012 TF-BA Base support block for setting dial bore gages 328.0012 TF-BI Base support plate for setting dial bore gages 441.0011 TF-BX 23° BXR Ring Groove Diameter / Width Setting Blocks 551.0045 TF-BX-CAL Setting Blocks calibration 59.00

12 TF-CA Caliper calibration accessory dial, digital and vernier calipers. Includes TF-SA support arm.

476.00

12 TF-CG Universal clamping fixture for calibration of indicators and gages 663.00

9 TF-CP Ball contact holders, .500 ID measurement. 441.00

9 TF-CR Set of 3 fixtures for measuring cylindrical ring gages and bores.CR-1 (.170”-.230”), CR-2 (.250”-.875”), CR-3 (.880”-Larger)

1697.00

12 TF-DG Calibration fixture for depth micrometer 524.00

12 TF-IND AGD dial indicator calibration fixture (includes .375” and 8 mm bushing and TF-2F block)

181.00

9 TF-IT Internal threaded ring ball P.D. module (for solid style rings) 1795.0012 TF-LG-2 Lead gage calibration fixture for either Allen or Gagemaker gages 252.0012 TF-LG-3 Lead gage calibration fixture 252.00

11 TF-PL Flat face Setting Blocks 496.00

11 TF-RISER1 1.00” Riser Block (Set of 2) 173.00



12 TF-SA Support Arm for TF-CA 197.00

9 TF-SB Adjustable height support table 1997.00

9 TF-SB-1 Bearing Rail Support Base 1997.00

9 TF-SP-5 For vertically holding gage pins .062 - .500 581.00

9 TF-SP-75 For vertically holding gage pins .062 - .750 581.00

12 TF-SS Straight support accessory for support of extended probes 327.00

11 TF-STR Straight Blocks 958.00

12 TF-SV V Support accessory for calibrating micrometers and standards 552.00

12 TF-TI Test indicator calibration block 169.00

9 TF-TP Calibration fixture for NPT, NPTF, and ANPT tapered plug gages, Includes wire for 27, 18, 14, & 11½ pitch threaded plugs.

1197.00

45 TF-TP-CAL Calibration Fixture calibration 79.0012 TF-VB V block fixture for calibration of Gagemaker's TH-3004 and MRP-2002 Upper arms 265.0012 TF-VN V blocks for calibration of axial travel probes and bore gages 367.009 TF-WHA-XX 29° thread wire holder modules with wires 4 pitch to 20 pitch 257.009 TF-WHA-XX 29° thread wire holder modules with wires 2 pitch, 3 pitch 284.009 TF-WHM-XX Metric thread wire holder modules with wires 1.0 mm -4.5mm pitch 183.009 TF-WHM-XX Metric thread wire holder modules with wires .5mm-.8mm, 5mm-6mm pitch 183.009 TF-WHV-XX 60° thread wire holder modules with wires 5 pitch to 48 pitch 183.009 TF-WHV-XX 60° thread wire holder modules with wires 1-4 pitch, 56-72 pitch 197.00

9 TF-WS Set of thread wire holder modules with wires for 6, 8,10,12,14,16,18, 20,24,28 and 32 pitch “V” threads (Requires TF-2R blocks)

1849.00

9 TF-WSA Thread wire holder set. Contains wires and holders for 4, 5, 6, 8,10,12, 14 and 16 pitch Acme 29° threads (Requires TF-2R blocks)

1995.00

9 TF-WSM Thread wire holder set. Contains wires and holders for .6,.75,1.0,1.25,1.5, 2.0,3.0,4.0 and 5.0 pitch Metric 60° threads (Requires TF-2R blocks)

1895.00

45 TF-XXRSC Taper Blocks Calibration Service 89.00

45 TF-XXT Taper Blocks Calibration Service 59.009 TF-XYT Adjustable height, X axis & Y axis support base 3995.00



20 TH-3000RSC External Thread Height, 0-50-0, Tool Joint 258.0021 TH-3001PD Now sold as TH-3001V 258.0020 TH-3001R External Thread Height, 0-100, 8-Round (T501) 297.0020 TH-3001S External Thread Shave Gage, 0-100, 8-Round (T072) 297.00

20 TH-3001V External Thread Depth/Height gage, 0-100, UN, ACME, Stub ACME, Line Pipe (.196 travel), (Same as TH-3001PD)

258.00

20 TH-3002B External Thread Height Gage, 0-25-0 ¾” TPF Buttress (T072) 313.0020 TH-3002BB External Thread Height Base Only, ¾” TPF Buttress 264.0020 TH-3002R External Thread Height Gage, 0-50-0, 8-Round (T501) 297.0020 TH-3002RB External Thread Height Base Only, 8-Round (T501) 240.0020 TH-3002V External Thread Height Gage, 0-50-0, Line Pipe/Tool Joint 258.0020 TH-3002VB External Thread Height Base Only, Line Pipe/Tool Joint 216.0020 TH-3003B External Thread Height Gage, 0-25-0, Step Base, 1” Buttress 338.0020 TH-3003BB External Thread Height Base Only, 1” Buttress 264.0021 TH-3004 Internal Thread Height Gage, 0-25-0, .0005, Line Pipe 838.0021 TH-3004DD Doug Dunford Special Clip Gage 957.0021 TH-3006 Internal Thread Height Gage, 0-25-0, .0005, 8-Round 860.0021 TH-3008 Internal Thread Height Gage, 0-25-0, 8-Round 640.00

21 TH-3009 Internal Thread Height/Depth Gage, 0-25-0, ¾” TPF Buttress (T072) UN, ACME, Stub ACME (.250 travel), (Same as aTH-3009PD)

640.00

25 TH-3009PD Now sold as TH-3009 640.0021 TH-3010 Internal Thread Height Gage, 0-25-0, 1” Base Length 640.0021 TH-3012 Internal Thread Height Gage, 0-25-0 ¾” - 2” NPT 577.0041 Thread Data Chart Thread Data Chart 7.0045 Thread Height Standards Calibration 34.0045 Thread Rolls Calibration 59.0019 TI-60 Tapered Insert Identifiers V032, V038R, V040, V050, V055, V066, V076 169.0019 TI-90 Tapered Insert Identifiers A-0.094, 90-V-0.050, 90-V-0.050, 90-V-0.084 169.0039 TM12-0-1 T-Mic for Stator major diameter 0” - 1” with ½” wide x 12” long base 665.0039 TM12-1-2 T-Mic for Stator major diameter 1” - 2” with ½” wide x 12” long base 665.0039 TM12-2-3 T-Mic for Stator major diameter 2” - 3” with ½” wide x 12” long base 665.0039 TM12-3-4 T-Mic for Stator major diameter 3” - 4” with ½” wide x 12” long base 694.0039 TM12-4-5 T-Mic for Stator major diameter 4” - 5” with ½” wide x 12” long base 766.0039 TM12-5-6 T-Mic for Stator major diameter 5” - 6” with ½” wide x 12” long base 810.0039 TM12-6-7 T-Mic for Stator major diameter 6” - 7” with ½” wide x 12” long base 886.0039 TM18-0-1 T-Mic for Stator major diameter 0” - 1” with ½” wide x 18” long base 752.0039 TM18-1-2 T-Mic for Stator major diameter 1” - 2” with ½” wide x 18” long base 752.0039 TM18-2-3 T-Mic for Stator major diameter 2” - 3” with ½” wide x 18” long base 752.0039 TM18-3-4 T-Mic for Stator major diameter 3” - 4” with ½” wide x 18” long base 781.0039 TM18-4-5 T-Mic for Stator major diameter 4” - 5” with ½” wide x 18” long base 853.0039 TM18-5-6 T-Mic for Stator major diameter 5” - 6” with ½” wide x 18” long base 897.0039 TM18-6-7 T-Mic for Stator major diameter 6” - 7” with ½” wide x 18” long base 973.0019 TP-10-16-JSS Profile Gage- API Numbered Connections #10, #12, #13, #16, M.T. (Macaroni 68.00

19 TP-11-1/2V Profile Gage-11½ V API Line Pipe, American Std. NPT, ¾” TPF, 11½ TPI, 11½ V Thread

68.00

19 TP-23-50-JSS Profile Gage- 2⅜” - 5½” API INT Flush, API Numbered Connections #23 - #50, 2” TPF, 4 TPI, V-0.038R

68.00

19 TP-415/076 Profile Gage- 2⅜” - 3½” P.A.C. Connections, 2⅜” - 4½” American Open Hole, 1.5” TPF, 4 TPI, V-0.076

68.00

19 TP-453-JSS Profile Gage- 2⅜” - 4½” API REG, 3½” & 4½” API Full Hole, 3” TPF, 5 TPI, V-0.040 68.00

19 TP-542-JSS Profile Gage- 6⅝” API REG, 5½” & 6⅝” API Full Hole, 2” TPF, 4 TPI, V-0.050 68.00

19 TP-543-JSS Profile Gage- 5½”, 7⅝”, & 8⅝” API REG, 3” TPF, 4 TPI, V-0.050 68.00

19 TP-56-77-JSS Profile Gage- API Numbered Connections #56 - #77, 3” TPF, 4 TPI, V-0.038R 68.00

19 TP-5BTC1-EXT Profile Gage- API Buttress Casing, External, 16” - 20”, 1” TPF, 5 TPI 68.00



19 TP-5BTC1-INT Profile Gage- API Buttress Casing, Internal, 16” - 20”, 1” TPF, 5 TPI 68.00

19 TP-5BTC75-EXT Profile Gage-API Buttress Casing, External, 4½” - 13⅜”, ¾” TPF, 5 TPI 68.00

19 TP-5BTC75-INT Profile Gage-API Buttress Casing, Internal, 4½” - 13⅜”, ¾” TPF, 5 TPI 68.00

19 TP-6232-JSS Profile Gage- 2⅜” - 2⅞” Hughes External Flush, 2” TPF, 6 TPI, V-0.032R 68.00

19 TP-642-H-JSS Profile Gage- 2⅞” Hughes Xtra Hole, 2⅜” Hughes Slim Hole, 2” TPF, 4 TPI, V-0.038R 68.00

19 TP-642-JSS Profile Gage- 4” API Full Hole, 2⅞” - 5” Hughes Xtra Hole, 2⅜” - 4½” Hughes Slim Hole, 2” TPF, 4 TPI, V-0.038R

68.00

19 TP-8V Profile Gage- 8V API Line Pipe, American Std. NPT, ¾” TPF, 8 TPI, 8 V Thread 68.0019 TP-9060LS-JSS Profile Gage- 90° & 60° Threads, Tool Grinding & Setting Gage 68.0019 TP-931-1/4-JSS Profile Gage- 2⅜” - 3½” Hughes Slim Line, 1.25” TPF, 3TPI, H-90 68.0019 TP-935-2-JSS Profile Gage- 3½” - 6⅝” Hughes H-90, 2” TPF, 3.5 TPI, H-90 68.0019 TP-935-3-JSS Profile Gage- 7” - 8⅝” Hughes H-90, 3” TPF, 3.5 TPI, H-90 68.0026 TPD .020 R, Pit Depth Gage, PD-3003, PD-3004 19.0018 TP-GPA-__P Internal/External general purpose ACME thread profile gage 119.0018 TP-ME-__P External ISO Metric series thread profile gage 119.0018 TP-MI-__P Internal ISO Metric series thread profile gage 119.0019 TP-NPT-14 NPT Threads, ¾” TPF, 14TPI 68.0019 TP-RTC-10R All API 10R Tubing, ¾” TPF, 10 TPI 10 Round 68.0019 TP-RTC-8R All API 8R Casing, Tubing & Drill Pipe, ¾” TPF, 8 TPI, 8 Round 68.0018 TP-SA-__P Internal/external Stub ACME thread profile gage 119.0018 TP-UNVE-__P External UN series thread profile gage 119.0018 TP-UNVI-__P Internal UN series thread profile gage 119.0030 TR-10R MRP Thread Roll- All API 10 Round Tubing (Set of 2) 442.0030 TR-11LP MRP Thread Roll- 11½ “V” API Line Pipe, American Std. NPT (Set of 2) 442.0030 TR-312SLH9 MRP Thread Roll- 2⅜” - 3½” Hughes Slim Line (Set of 2) 643.0030 TR-352H9 MRP Thread Roll- 3½” - 6⅝” Hughes H-90 (Set of 2) 643.0030 TR-353H9 MRP Thread Roll- 7” - 8⅝” Hughes H-90 (Set of 2) 643.00

30 TR-41576 MRP Thread Roll- P.A.C. Connections, 2⅜” - 3½”, 2 “ - 4½” American Open Hole (Set of 2)

552.00

30 TR-4238 MRP Thread Roll- 4” API Full Hole, API Numbered Connections #23 - #50, 2⅞” - 5” Hughes Xtra Hole, 5½” & 6⅝” API Full Hole, 2⅜” - 4½” Hughes Slim Hole, 6⅝” API REG, 2⅜” - 5½” API INT Flush (Set of 2)

552.00

30 TR-4338 MRP Thread Roll- API Numbered Connections #56 - #77, 5½”, 7⅝”, & 8⅝” API REG (Set of 2)

552.00

30 TR-5340 MRP Thread Roll- 2⅜” - 4½” API REG, 3½” - 4½” API Full Hole 552.00

30 TR-61555 MRP Thread Roll- API Numbered Connections #10, #12, #13, #16M.T. (Macaroni Tubing) (Set of 2)

552.00

30 TR-6232 MRP Thread Roll- 2⅜” & 2⅞” External Flush (Set of 2) 643.0030 TR-8LP MRP Thread Roll- 8V API Line Pipe, American Std. NPT (Set of 2) 442.0030 TR-8R MRP Thread Roll- All API 8 Round Tubing (Set of 2) 442.0015 TRA-10P Thread Roll- 10 pitch ACME (Set of 2) 354.0015 TRA-12P Thread Roll- 12 pitch ACME (Set of 2) 354.0015 TRA-14P Thread Roll- 14 pitch ACME (Set of 2) 354.0015 TRA-16P Thread Roll- 16 pitch ACME (Set of 2) 354.0015 TRA-18P Thread Roll- 18 pitch ACME (Set of 2) 354.0015 TRA-2P Thread Roll- 2 pitch ACME (Set of 2) 389.0015 TRA-3P Thread Roll- 3 pitch ACME (Set of 2) 389.0015 TRA-4P Thread Roll- 4 pitch ACME (Set of 2) 389.0015 TRA-5P Thread Roll- 5 pitch ACME (Set of 2) 354.0015 TRA-6P Thread Roll- 6 pitch ACME (Set of 2) 354.0015 TRA-8P Thread Roll- 8 pitch ACME (Set of 2) 354.0044 TRAC-2012 CAL FL Calibration Mic Trac 2012 with Force Lok 389.0044 TRAC-2012 CAL NF Calibration Mic Trac 2012 Non Force Lok 319.0044 TRAC-2012 with SLEC Calibration Mic Trac 2012 with SLEC file 533.00



44 TRAC-2024 CAL FL Calibration Mic Trac 2024 with Force Lok 457.0044 TRAC-2024 CAL NF Calibration Mic Trac 2024 Non Force Lok 389.0044 TRAC-2024 with SLEC Calibration Mic Trac 2024 with SLEC file 617.0044 TRAC-2036 CAL FL Calibration Mic Trac 2036 with Force Lok 527.0044 TRAC-2036 CAL NF Calibration Mic Trac 2036 Non Force Lok 457.0044 TRAC-2036 with SLEC Calibration Mic Trac 2036 with SLEC file 687.0044 TRAC-2048 CAL FL Calibration Mic Trac 2048 with Force Lok 595.0044 TRAC-2048 CAL NF Calibration Mic Trac 2048 Non Force Lok 527.0044 TRAC-2048 with SLEC Calibration Mic Trac 2048 with SLEC file 899.0044 TRAC-2060 CAL FL Calibration Mic Trac 2060 with Force Lok 735.0044 TRAC-2060 CAL NF Calibration Mic Trac 2060 Non Force Lok 595.008 Training Options Option B: Training at Gagemaker’s facility (per day, per person) 750.008 Training Options Option A: Training at customer’s facility (per day, plus airfare) 2500.0030 TR-B10E Thread Roll- API Buttress Casing, External, 16” - 20” (Set of 2) 552.0030 TR-B10I Thread Roll- API Buttress Casing, Internal, 16” - 20” (Set of 2) 552.0015 TRB745-10P Thread Roll- 10 pitch, 7°x 45° (Set of 2) 354.0015 TRB745-12P Thread Roll- 12 pitch, 7°x 45° (Set of 2) 354.0015 TRB745-16P Thread Roll- 16 pitch, 7°x 45° (Set of 2) 354.0015 TRB745-2P Thread Roll- 2 pitch, 7°x 45° (Set of 2) 389.0015 TRB745-3.5P Thread Roll- 3.5 pitch, 7°x 45° (Set of 2) 389.0015 TRB745-4P Thread Roll- 4 pitch, 7°x 45° (Set of 2) 389.0015 TRB745-6P Thread Roll- 6 pitch, 7°x 45° (Set of 2) 354.0015 TRB745-8P Thread Roll- 8 pitch, 7°x 45° (Set of 2) 354.0030 TR-B75E MRP Thread Roll- API Buttress Casing, External, 4½” - 13⅜” (Set of 2) 552.0030 TR-B75I MRP Thread Roll- API Buttress Casing, Internal, 4½” - 13⅜” (Set of 2) 552.0030 TR-BL Blank Thread roll set 108.0015 TRME-15P Thread Roll- 1.5mm pitch (Set of 2) 354.0015 TRME-175P Thread Roll- 1.75mm pitch (Set of 2) 354.0015 TRME-25P Thread Roll- 2.5mm pitch (Set of 2) 354.0015 TRME-2P Thread Roll- 2mm pitch (Set of 2) 354.0015 TRME-35P Thread Roll- 3.5mm pitch (Set of 2) 354.0015 TRME-3P Thread Roll- 3mm pitch (Set of 2) 354.0015 TRME-4P Thread Roll- 4mm pitch (Set of 2) 354.0015 TRMI-15P Thread Roll- 1.5mm pitch (Set of 2) 354.0015 TRMI-175P Thread Roll- 1.75mm pitch (Set of 2) 354.0015 TRMI-25P Thread Roll- 2.5mm pitch (Set of 2) 354.0015 TRMI-2P Thread Roll- 2mm pitch (Set of 2) 354.0015 TRMI-35P Thread Roll- 3.5mm pitch (Set of 2) 354.0015 TRMI-3P Thread Roll- 3mm pitch (Set of 2) 354.0015 TRMI-4P Thread Roll- 4mm pitch (Set of 2) 354.0015 TRSA-10P Thread Roll- 10 pitch Stub ACME (Set of 2) 354.0015 TRSA-12P Thread Roll- 12 pitch Stub ACME (Set of 2) 354.0015 TRSA-14P Thread Roll- 14 pitch Stub ACME (Set of 2) 354.0015 TRSA-16P Thread Roll- 16 pitch Stub ACME (Set of 2) 354.0015 TRSA-18P Thread Roll- 18 pitch Stub ACME (Set of 2) 354.0015 TRSA-2P Thread Roll- 2 pitch Stub ACME (Set of 2) 389.0015 TRSA-3P Thread Roll- 3 pitch Stub ACME (Set of 2) 389.0015 TRSA-4P Thread Roll- 4 pitch Stub ACME (Set of 2) 389.0015 TRSA-5P Thread Roll- 5 pitch Stub ACME (Set of 2) 354.0015 TRSA-6P Thread Roll- 6 pitch Stub ACME (Set of 2) 354.0015 TRSA-8P Thread Roll- 8 pitch Stub ACME (Set of 2) 354.0015 TRT-10P Thread Roll- 10 mm pitch Trapezoidal (Set of 2) 389.0015 TRT-12P Thread Roll- 12 mm pitch Trapezoidal (Set of 2) 389.0015 TRT-2P Thread Roll- 2 mm pitch Trapezoidal (Set of 2) 354.0015 TRT-3P Thread Roll- 3 mm pitch Trapezoidal (Set of 2) 354.00



15 TRT-4P Thread Roll- 4 mm pitch Trapezoidal (Set of 2) 354.0015 TRT-5P Thread Roll- 5 mm pitch Trapezoidal (Set of 2) 354.0015 TRT-6P Thread Roll- 6 mm pitch Trapezoidal (Set of 2) 354.0015 TRT-8P Thread Roll- 8 mm pitch Trapezoidal (Set of 2) 389.0015 TRT-9P Thread Roll- 9 mm pitch Trapezoidal (Set of 2) 389.0015 TRVE-10P Thread Roll- 10 pitch external 60° “V” (Set of 2) 354.0015 TRVE-12P Thread Roll- 12 pitch external 60° “V” (Set of 2) 354.0015 TRVE-14P Thread Roll- 14 pitch external 60° “V” (Set of 2) 354.0015 TRVE-16P Thread Roll- 16 pitch external 60° “V” (Set of 2) 354.0015 TRVE-18P Thread Roll- 18 pitch external 60° “V” (Set of 2) 354.0015 TRVE-20P Thread Roll- 20 pitch external 60° “V” (Set of 2) 354.0015 TRVE-4P Thread Roll- 4 pitch external 60° “V” (Set of 2) 389.0015 TRVE-5P Thread Roll- 5 pitch external 60° “V” (Set of 2) 354.0015 TRVE-6P Thread Roll- 6 pitch external 60° “V” (Set of 2) 354.0015 TRVE-8P Thread Roll- 8 pitch external 60° “V” (Set of 2) 354.0015 TRVI-10P Thread Roll- 10 pitch internal 60° “V” (Set of 2) 354.0015 TRVI-12P Thread Roll- 12 pitch internal 60° “V” (Set of 2) 354.0015 TRVI-14P Thread Roll- 14 pitch internal 60° “V” (Set of 2) 354.0015 TRVI-16P Thread Roll- 16 pitch internal 60° “V” (Set of 2) 354.0015 TRVI-18P Thread Roll- 18 pitch internal 60° “V” (Set of 2) 354.0015 TRVI-20P Thread Roll- 20 pitch internal 60° “V” (Set of 2) 354.0015 TRVI-4P Thread Roll- 4 pitch internal 60° “V” (Set of 2) 389.0015 TRVI-5P Thread Roll- 5 pitch internal 60° “V” (Set of 2) 354.0015 TRVI-6P Thread Roll- 6 pitch internal 60° “V” (Set of 2) 354.0015 TRVI-8P Thread Roll- 8 pitch internal 60° “V” (Set of 2) 354.0038 TS-1000 Shoulder Depth Gage, Base Length 6” 726.0038 TS-4000 Shoulder Depth Gage (Specify Taper) 1107.0038 TSS-1000 TS-1000 Setting Standard 722.0038 TSS-4000 TS-4000 Setting Standard 752.009 TW-50 50 in-lb torque wrench w/ 5/32” hex wrench adapter 246.0043 WOOD-A Wooden Case, 54” X 17” X 3.5” Call43 WOOD-B Wooden Case, 48” X 10” X 3.5” Call43 WOOD-B-1 Wooden Case, 46” X 26” X 3.5” Call43 WOOD-C Wooden Case, 44” X 8” X 3.5” Call43 WOOD-D Wooden Case, 42” X 24” X 3.5” Call43 WOOD-E Wooden Case, 42” X 10” X 3.5” Call43 WOOD-F Wooden Case, 35” X 12” X 3.5” Call43 WOOD-G Wooden Case, 34” X 10” X 3.5” Call43 WOOD-H Wooden Case, 34” X 8” X 3.5” Call43 WOOD-I Wooden Case, 33” X 21” X 3.5” Call43 WOOD-J Wooden Case, 27” X 10” X 3.5” Call43 WOOD-J-1 Wooden Case, 27” X 9” X 3.5” Call43 WOOD-K Wooden Case, 26” X 15” X 3.5” Call43 WOOD-L Wooden Case, 25” X 10” X 3.5” Call43 WOOD-M Wooden Case, 22” X 12” X 3.5” Call43 WOOD-N Wooden Case, 22” X 8” X 3.5” Call43 WOOD-O Wooden Case, 21” X 8” X 3.5” Call43 WOOD-P Wooden Case, 17” X 10” X 3.5” Call43 WOOD-Q Wooden Case, 15” X 15” X 3.5” Call41 WT-9001 Wall Thickness Gage, 2⅜” - 4½” 439.0041 WT-9002 Wall Thickness Gage, 4½” - 9⅝” 497.0041 WT-9003 Wall Thickness Gage, 4½” - 13⅜” 538.00

CUSTOMER SERVICE For any questions, quotations, requests, technical support or any other information, please contact one of our representatives at any of the following:

Address: Gagemaker LP 712 East Southmore Ave.

Pasadena, TX 77502 Fax: 713-472-7241 (24/7) Phone: 713-472-7360

Monday - Friday: 7am - 5pm CST/CDT Saturday: 7am - 12pm CST/CDT

Website: http://www.gagemaker.com E-mail: [email protected]

TECHNICAL SUPPORT Gagemaker technical support is available through contacting our friendly Customer Service department at any of the above options.

QUOTATIONS Quotations are valid for no more than 30 days after the date originally provided. Please refer to the Customer Service section for contact information for quotations.

PICK UP/WALK-IN/COLLECTION Our products are available for pick up directly from our Pasadena facility. However, please notify us of your intentions to pick up products a minimum of 2 hours in advance of your arrival.

OUT-OF-STOCK GOODS Ordered goods which are out-of-stock will be automatically back-ordered. If you do not wish to place items on back-order, please mark your order as Ex-stock or contact our Customer Service.

HANDLING CHARGE Gagemaker will charge a $10 handling fee for ALL orders on products invoiced for LESS than $50. No fee will be applied to orders invoicing for over $50.

RETURN POLICY Gagemaker requires a 15% restocking fee on all non-defective returns, except for MIC TRACs (either the MT-3000 or MT-4000) which will be charged a 20% restocking fee. Items not listed in our catalog are not returnable. Returns will be accepted up to 30 days after the date of the invoice. Please return products to the address listed in our Customer Service section. Please contact Gagemaker for a Return Goods Authorization (RGA). Contact our Customer Service for any questions regarding your return.

Defective products must be returned 90 days from the invoice date in order to be eligible for a full refund. Defective products are not subject to any restocking fee. For defective product information, please see our Product Warranty section.

PRODUCT WARRANTY GAGEMAKER warrants its products to be free from defects in material and workmanship for one year from the date of shipment. After 90 days, at our option, we will repair or replace any defective product upon postage prepaid return of a properly packed product to our factory in Pasadena, Texas. During the first 90 days, a defective product will be eligible for a full refund. This warranty applies to all products when used in a normal industrial environment. Any unauthorized tampering, misuse or neglect will make this warranty null and void. Under no circumstances will GAGEMAKER or any affiliate have any liabilities for loss or for any indirect or consequential damages. The foregoing warranties are in lieu of all other warranties expressed or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Return products for repair or calibration to:

Gagemaker LP 712 East Southmore Ave. Pasadena, TX 77502

Gagemaker LP, P.O. Box 87709, Houston, Texas 77287-7709 712 East Southmore Ave., Pasadena, Texas 77502

Phone: 713-472-7360 Fax: 713-472-7241

Web site: www.gagemaker.com

2008 Pricing Supplement · Thank you for acquiring Gagemaker’s September 2008 Price Supplement....

Documents

Transcript of 2008 Pricing Supplement · Thank you for acquiring Gagemaker’s September 2008 Price Supplement....