2008 Midwest Regional Sankaran Hazard Evaluation Procedures
Transcript of 2008 Midwest Regional Sankaran Hazard Evaluation Procedures
1
Hazard EvaluationProcedures UPDATE
By Review of CCPS bookGuidelines for Hazard Evaluation Procedures, Third Edition
(Purchase Book from www.wiley.com)by
N. Sankaran – UOP - Honeywell
AIChE Midwest Regional Conference-Sept. 2008University of Illinois (UIC) Chicago
*The views and opinions expressed in this presentation are those of the author and do not represent those of UOP LLC or Honeywell International Inc.
2
Historical
Dec. 3, 1984 – Catastrophic toxic release of MIC at Bhopal, India over 100,000 injured.1985 – Industry leaders asked AIChE to lead effort to eliminate such catastrophic events.March, 1985 – CCPS formed to
Advance Process Safety technologyServe as Process Safety resourceFoster – P.S. knowledge in EducationPromote – Process Safety as key value
3
Historical (cont’d)
First step forward – write a book on “Guidelines for Process Hazard Evaluation Procedures”Mother of all future project effortsDedicated to Tom Cararody – 1st Director
4
Guidelines for HEP Book
Keeps Process Engineers updated on the effective methodologies that process safety demands.Includes information not included in previous editions, giving a comprehensive overview of this topic area.Almost 200 pages of worked examples are included to facilitate understanding.
5
Guidelines for HEP Book(cont’d)
ContentsHazard Evaluation Procedures – 9 chaptersWorked Examples – 13 chaptersAppendices – FiveComprehensive References
(Purchase Book from www.wiley.com)
6
Progress in 23 Years
Product of various company sponsor groupsNational & International interactionForms integrated companion to other AIChE guidelines / publications
DetailedKept-Introductory
90 glossary items
15 glossary items
150 tables6 tables80 figures22 figures550 pages120 Pages
20081985
3rd Edition1st Edition
7
HEP-3 GlossaryBasic process control system (BPCS): A system that responds to input signals from the process and its associated equipment, other programmable systems, and/or from an operator, and generates output signals causing the process and its associated equipment to operate in the desired manner and within normal production limits.Common cause failure: The occurrence of two or more failures that result from a single event or circumstance.Hazard evaluation: Identification of individual hazards of a system, determination of the mechanisms by which they could give rise toundesired events, and evaluation of the consequences of these events on health (including public health), environment, and property. Uses qualitative techniques to pinpoint weaknesses in design and operation of facilities that could lead to incidents.Layer of protection: A physical entity supported by a management system that is capable of preventing an initiating cause from propagating to a specific loss event or impact.Worst credible case: The most severe incident considered plausible or reasonably believable.
Illustrate:Precise & thorough – adopted in other guidelinesAbove illustrate interaction with other disciplines
8
Importance of HEP-3
Unprecedented interest in hazard evaluationPrevention of incidents, economic impactsStriving for zero accidentsPublic/Governmental agency interestProcess Safety ManagementLaws & Regulations
OSHA – 29CFR 1910.119Clean Air Act – 49 CFR.68International Standards – IEC-61511 (ANSI/ISA-84.00
9
Changes in 3rd Edition
New section added on Inherent Safety Review (p.64)
Reorganized into Non-scenario based (Ch.4 checklists)and scenario based (Ch.5 HAZOPs) methodologiesScenario Risk Estimation (Ch.7)
Hazard Evaluation as applied to:Procedure Based OperationsProgrammable SystemsFacility SitingHuman Factors
Emphasis on Process Life Cycle considerationsAdditional checklists & forms in Appendix A
10
Interrelation of Book Chapters
11
H.E. OverviewEffort to identify/analyze hazardous situations associated with processes (11)Identify weaknesses in designs & operation of facilities which can lead to releases, fires, explosionsNeeded to improve safety & manage risksCompliments traditional Industrial Safety & HealthCornerstone of the PSM programUsed in investigation of causes of accidentsManaging change to processesIdentify critical equipment & special needs (M, I, T, etc.)
Should be performed throughout Life Cycle of Process(De, D, C, O DC)
12
H.E. Overview (cont’d)
Two Parts of BookPart 1 – (Page 1-292)
Specific steps to perform HE using 11 techniquesSome more common than others
Part 2 – (Page 292-460 pages)Examples to assist in developing scope, organize, lead and document hazard analysis
Benefits based on experience of many PS Professionals
3 x 30 x 25 - 2,250 years
13
Benefits of Hazard Evaluation (12)
Fewer incidents over life of processReduced consequencesImproved emergency responseImproved understanding of process and trainingMore efficient & productive operationsImproved regulatory/community relations
Need significant investment over life of facility
LimitationsAnalysis never complete/perfectResults cannot be verifiedBased on present subjective judgementBased on existing knowledge
HE is an essential to reduce process risksMaintain process safety cultureEnsures compliance with C, S, R, LEstablishes/enhances organizational competence
Maintains interaction among all stakeholders (E, C, N)
14
Introductory (Ch.1)
Hazard Evaluation – 1st steps in managing process risksPrevents Episode Events – fires, releases, explosionsHistorically handled by good engineering design/operating practicesHE focuses on equipment failures, software problems, human errors, external factorsFor High Quality – continued effort of multi-disciplinary groupsIdentify if more detailed methods are needed – LOPA, CPQRAGuidance on HI, Select Methods, How to Use, ImplementationLimitations of Hazard Evaluation (p.31)
15
Process Risk Management
As Related to PSEvaluate hazards and risk (Hazard Analysis)Manage the Risk (9 items-Op. Procedures-17)Learn from Experience (metrics, audits)
Aspects of Risk Management
16
Anatomy of a Loss EventElements of Loss Events
Process hazards (24), initiating causes (18), incident causes (10)-p.19Normal, abnormal, emergency stages of an event
Hazard Evaluation Regulations29 CFR 1910.119 – Process Safety Management40 CFR 68 – EPA Risk Management Program
Limitations of Hazard Evaluations (31)
17
Preparation for HE (Ch.2)
Success of entire project is dependent on adequate preparationAn infrastructure to support HEVarious phases of process have different objectives (p.37)Scope and boundariesInformation requirements (p.40)Sept-up project on softwareSkills – Leader, ScribeOther professionals needed for team (p.44)Team leader responsibilities (p.46)Initial session important – process overview, facility walk-down, etc.
18
Information Needs for HEInformation needs for HE during Project Life Cycle(p.39)
19
Hazard Identification (Chapter 3)
First part of hazard evaluationTypes of consequences – human, environmental, economic (52)Material property data for HazID – (Pyrophonic) p.53Hazardous compounds (Acids) p.55Chemical interaction matrix p.57Hazard Identification results (hazard list) p.58Hazard Identification checklist (Polymerize) p.60Application of Inherent Safety p.65
20
Inherent Safety Strategy & Application
IS design strategies – More reliable/safe than passive, active, procedural approachesFour basic strategies include:
Minimize (e.g. reduce the quantity of a hazardous materialSubstitute (e.g. substitute the hazardous material with a less hazardous materialModerate (e.g. use less hazardous conditions, a less hazardous form of a material, or facilities that minimize the impact of a release of a hazardous materialSimplifiy (e.g. design facilities that eliminate unnecessary complexity and make operating errors less likely, and that are forgiving of errors that are made)
21
Application of Inherent Safety
22
Non-Scenario Based HE Techniques (Ch.4)
4 TechniquesPreliminary Hazard Analysis (MIL-STD-882)Safety ReviewRelative Risk Ranking Methods (6 Index-Discussion-p.67)Checklist Analysis
Common FeaturesBroad brush look at hazardsDone during early stages of design
TypesSmall System – chemical unloading facilityLarge Process – a petroleum process
Hazard CategoriesHC-I - NegligibleHC-II - MarginalHC-III - CriticalHC-IV - Catastrophic
23
Examples for Discussion
PHA - H2S feed system to a plantSafety Review - Extend life of a plant, update to current standardChecklist - DAP Process, materials, equipment, processRisk Index - Substance hazard index of various chemicals in plant
24
Time Estimates (p.74)
Sample Worksheet
25
Scenario Based HE Procedures
Predictive, analytical method based on incident scenarios
What-If/Checklist AnalysisHazard & Operability Slides (HAZOP)Fault-Tree Analysis (FTA)Failure Modes & Effects Analysis (FMEA)Event-Tree Analysis (ETA)Other Techniques
All 8 techniques generate/evaluate incident scenarios
26
Scenario Based HE Procedures
FeaturesPerform very detailed Hazard AnalysisQualitative but can be structured for detailed studies (SIS, LOPA)Need special training and skills (FTA, ETA, etc.)Need more time and effortEach method illustrated by example
What-IfExperienced personnel brainstorming process with a series
of questions – each representing potential failure or mis-operation.
Question AreasEquipment failure, human error, external events
27
Scenario Based HE Procedures
Sample worksheet structure – p.105
Typical questions – p.110
Sample HE checklist – p.111
Hazards checklist – p.113
SummaryMost commonly used methodLeast structuredCan be used at any stage of Life CycleUseful when focusing on MOC reviews
28
Hazard & Operability Studies
Identify Hazards (S, H, E)Problems which prevent efficient operationDeviation of a parameter with a consequence for which safeguards are neededGuide Word + Parameter = DeviationMore + Flow = More FlowGeneral & specific parametersLibrary of deviations for specific equipment (p.117)DAP Process HAZOP example & worksheet (p.132)
29
Overview of HAZOP Technique
30
Overview of HAZOP Technique
Example library of relevant deviations for process section types
31
FMEA-Failure Modes, Effects Analysis
Analysis of consequences of component, module or subsystem failuresBottoms up analysisSpreadsheet where FM, causes, probability of occurrence, consequences, proposed safeguards are notedExample of FM of equipment – HE (p.138)
Sample worksheet of a DAP Batch Reactor (p.139)
32
Fault Tree Analysis
Starts with a TOP event & identifies causesTop down analysisIntermediate events – related to top event using logical operations such as AND andOR gatesExample of damage to reactor due to high process temperature (p.156)
33
Damage to Reactor
Development of the Top event for the emergency cooling system example
34
Other Techniques
Event Tree Analysis – Evaluates protective system failuresLoss of cooling to oxidation reactor – p.166
Cause – Consequence Analysis – p.167
Loss of Containment AnalysisFive other methods with references – p.173
35
Selection of HE Techniques
Factors of influence areMotivation for the studyType of information availableResource availabilityAnalyst/Management preference
Typical effort needed for12 methods – Large/Small systems (p.185)
Example Flowcharts (p.190-194)
Is relevant checklist available – use CLIs detailed design info available – consider HAZOPIs the process a mechanical or electric system – consider FMEA
Integrating S, E, REL, Maint, Q & Sec into HE, combined reviews (p.204)
36
Applications of HE Techniques During a Process Life Cycle
37
Risk Based Adequacy of Safeguards(Ch.7)
Layer of Protection AnalysisSimplified quantitative Risk AnalysisCCPS – Concept bookFive step procedure (p.226)
Example LOPA (Runaway Reactors – p.231)
Scenario descriptionFrequency of unmitigated consequenceTotal PFD of all IPLsFrequency of mitigated consequenceRisk tolerance criteria met
38
Follow-up of Hazard Evaluation
Development of Recommendation –immediate action, scheduled, further evaluationSimple Risk Matrix (p.244)
Documentation for follow-upDevelopment of Management responsesSpecial findings/sharing of informationHE results useful over Life Cycle of the plant (p.255)
39
4 x 4 Risk Matrix
40
Special Hazard Analysis Applications
60-70% of accidents in 2 decades occurred during non-routine modes of operations.
Hazard Analysis of Procedure-based Operations Unloading a Toxic Chemical – p.266Programmable Logic Controllers-Control of ProcessesChemical Reactivity Hazards *- Inadequate Venting of GasesCombination Methods – HAZOP/LOPAHuman Factors Study – Negative Factors Leading to Errors. P.277-9HRA – Human Reliability AnalysisFacility Siting issues *
* Separate CCPS/guideline books available
41
HE Methods – Worked Examples (Ch. 10-22, p. 293-460
11 methods (e.g. Event Tree Analysis)Cover – 9 phases of Life Cycle (e.g. plant expansionsCovers 2 aspects – How to Perform; TrainingApplied to VCM – Manufacture operationsIllustrative – block flow diagrams, process descriptions, scope, worksheets, tables, checklists, discussions, observations, conclusions.Sample worksheet for every method – FMEA, p.448
42
Useful Appendices (A)
Checklist items – corrosion types (464)Management of Change – Impact Evaluation List (456)Reactivity checklist – Reactivity with air (470)Inherent safety checklist – 5 categories – 3 pages (472)
43
Supplemental HAZID Questions (Appendix B)
Process (20)Unit siting/layout (16)Equipment
Pressure relief (20)Piping & valves (30)Pumps (6)Compressors (6)Reactors (8)Vessels (9)HE (8)Furnaces (4)Instrumentation (23)Elec. Power (12)
Miscellaneous (2)How are equipment & piping protected from corrosion?
Operations (22)Maintenance (13)Personnel Safety (68)Environmental Protection (24)Management Issues (21)
44
Hazard Evaluation Software
9 samples listedPHA - Unwin Co. - USAHAZOP - Isograph - UKPHA-PRO – Dyadem – CanadaPHA-Works – PrimaTech - USA
45
Process Safety Enhancement Resources Organizations Listed
40 premier organizations listed, including AIChE-CCPS
National Safety Council - Safety Video ProgramWorld Bank – Hazard Evaluation manualUS Chemical Safety Board – Hazard InvestigationIChemE (UK) – Sister org. to AIChEUS EPA – Risk Management Program, WCS.
244 references for more detailed studies
46
How Do You Participate?
How do you participate in a project like this?CCPS Member Co.Join new project sub-committeeProject examples:
Guidelines/concept booksDatabases (PERD), (PSID)Web-based Safety ProjectsSpecial Interest items
List of Current Projects (30)Benefits:
Trade knowledgeContribute diversity of experienceLesson in concensus approach
47
Participation (cont’d)
New projects submitted to Technical Steering CommitteeSub-committee formed – Leader, Eng. Contractor, MembersImportance of subjects takes precedence over sales volume.
48
Index1. Title Slide2. Historical (2,3)3. Guidelines for HEP Book - General Comments (4,5)4. Progress Update (6)5. Sample Glossary (7)6. Importance of HEP-3 (8)7. Changes in 3rd Edition (9)8. Interrelation of Chapters (10)9. HE Overview, Benefits (11-13)10. Introductory-Ch. 1 (14)11. Concept of Risk Management (15)12. Anatomy of a Loss Event (16)13. Preparation for HE (17)14. Information Needs (18)
49
Index
15. Hazard Identification-Ch. 3 (19)16. Inherent Safety Strategy & Application (20,21)17. Non-Scenario Based Techniques (22-24)18. Scenario Based HE Procedures (25-34)19. Selection of Techniques (35, 36)20. LOPA (37)21. Follow-up of Hazard Evaluation (38, 39)22. Special Applications (40)23. Appendices (42)24. Supplemental Checklist (43)25. Software (44)26. Process Safety Organizations (43)27. Participation (46, 47)