2008 IES Catalog
description
Transcript of 2008 IES Catalog
Sellador de costuras y unionesSellador de costuras y uniones
Adhesivo para panelesAdhesivo para paneles
Reparación PlásticaReparación Plástica
Espumas AutomotorasEspumas Automotoras
INTERNATIONAL EPOXIES & SEALERS
Manufacturers of SpecialtyManufacturers of Specialty
Adhesives, Sealers and FoamsAdhesives, Sealers and Foams
SEAM SEALERSSEAM SEALERS
PANEL BONDINGPANEL BONDING
PLASTIC REPAIRPLASTIC REPAIR
AUTOMOTIVE FOAMSAUTOMOTIVE FOAMS
ProductCatalog
2008-2009
ProductCatalog
2008-2009
MEMBER
Thank you for your interest in International Epoxies & Sealers! It is our objective to provide our customers with the highest quality products and services at the fairest prices. This is backed by a professional Sales force and professional office, warehouse, manufacturing and research/development staffs which, when combined, result in an unbeatable team to serve our customer’s needs.
International Epoxies & Sealers™P.O. Box 185
San Antonio, FL 33576
Toll Free Phone (800) 451-7206Toll Free Fax (866) 239-0328
© International Epoxies & Sealers™ All Rights Reserved.
Our Customer Service Department is available to take your order or to answer
questions from 7:30 to 4:00 pm EST.Faxed orders can be sent 24 hours a day,
TOLL FREE, to 1-866-239-0328.
We look forward to serving you!
MISSION STATEMENT
INTER-MIX™ Application Chart 1-2Product Interchange Chart 3Body Sealers 4-6Panel Bonding Adhesives 6-7Expandable Foams 7Plastic Repair 8-11Static Mixers/Zip-Tips 12Applicator Guns 12-13General Adhesives 13-14Glass Sealers/Adhesives 15Coatings 16Primers 17
INTER-MIX™ Application Chart 1-2Product Interchange Chart 3Body Sealers 4-6Panel Bonding Adhesives 6-7Expandable Foams 7Plastic Repair 8-11Static Mixers/Zip-Tips 12Applicator Guns 12-13General Adhesives 13-14Glass Sealers/Adhesives 15Coatings 16Primers 17
TABLE OF CONTENTSTABLE OF CONTENTS
Paints 17Specialty Cleaners 18Service Aids 19-20Cleaning Aids 21Body/Emblem Moulding Tape 22Miscellaneous Tape 23Weatherstrip 23Drill Bits 24Abrasives 25Miscellaneous 26Cabinet/Wall Rack 27
Paints 17Specialty Cleaners 18Service Aids 19-20Cleaning Aids 21Body/Emblem Moulding Tape 22Miscellaneous Tape 23Weatherstrip 23Drill Bits 24Abrasives 25Miscellaneous 26Cabinet/Wall Rack 27
NUMERICAL INDEXNUMERICAL INDEX
219. ... ... ... ... ... ...14225. ... ... ... ... ... ...14226. ... ... ... ... ... ...14230. ... ... ... ... ... ...13612. ... ... ... ... .. 9,14622. ... ... ... ... ... 9,14631. ... ... ... ... ... 9,14650. ... ... ... ... ... 9,14670. ... ... ... ... ... ...15722. ... ... ... ... ... ...19723. ... ... ... ... ... ...19724. ... ... ... ... ... ...19742. ... ... ... ... ... ...19743. ... ... ... ... ... ...19744. ... ... ... ... ... ...19771. ... ... ... ... ... ...19772. ... ... ... ... ... ...19774. ... ... ... ... ... ...19790. ... ... ... ... ... ...19791. ... ... ... ... ... ...19794. ... ... ... ... ... ...191000... ... ... ... ... ...211015... ... ... ... ... ...211201... ... ... ... 15,191203... ... ... ... 15,191210... ... ... ... ... ...191211... ... ... ... ... ...191212... ... ... ... ... ...191412... ... ... ... ... ...201450... ... ... ... ... ...191470... ... ... ... ... ...201508... ... ... ... ... ... 51511... ... ... ... ... ... 41512... ... ... ... ... ... 41514... ... ... ... ... ...151515... ... ... ... ... ...151516... ... ... ... ... ...151525... ... ... ... ... ...141535... ... ... ... ... ...141540... ... ... ... ... ... 41541... ... ... ... ... ... 41545... ... ... ... ... ... 41546... ... ... ... ... ... 41548... ... ... ... ... ... 41560... ... ... ... ... ... 51565... ... ... ... ... ... 51570... ... ... ... ... ... 5
1571... ... ... ... ... 5,131575... ... ... ... ... ...131576... ... ... ... ... ...131577... ... ... ... ... ...131578... ... ... ... ... ...131581... ... ... ... ... ... 51585... ... ... ... ... ... 51587... ... ... ... ... ... 51588... ... ... ... ... ... 51600... ... ... ... ... ...161601... ... ... ... ... ...161660... ... ... ... ... ...161680... ... ... ... ... ...161685... ... ... ... ... ...161690... ... ... ... ... ...161700... ... ... ... ... 9,181701... ... ... ... ... 9,181702... ... ... ... ... 9,181703... ... ... ... ... 9,181750... ... ... ... ... ...181752... ... ... ... ... ...181753... ... ... ... ... ...181840... ... ... ... ... 7,174004... ... ... ... ... ...154010... ... ... ... ... ...154016... ... ... ... ... ...154182... ... ... ... ... 9,174185... ... ... ... ... 9,174186... ... ... ... ... ...174187... ... ... ... ... ...174189... ... ... ... ... ...174192... ... ... ... ... ...174193... ... ... ... ... ...174195... ... ... ... ... ...174201... ... ... ... ... ...174203... ... ... ... ... ...174205... ... ... ... ... ...174503... ... ...... 14,194504... ... ... ... ... ...204505... ... ... ... ... ...204509... ... ... ... ... ...164511... ... ... ... ... ...214513... ... ... ... ... ...164516... ... ... ... ... ...204518... ... ... ... ... ...174519... ... ... ... ... ...174520... ... ... ... ... ...14
4521... ... ... ... ... ...184522... ... ... ... ... 9,164523... ... ... ... ... ...164524... ... ... ... ... ...164525... ... ... ... ... ...174526... ... ... ... ... ...174530... ... ... ... ... ...174535... ... ... ... ... ...214537... ... ... ... ... ...214538... ... ... ... ... ...214540... ... ... ... ... ...184540-55 . ... ... ... ...184550... ... ... ... ... ...194557... ... ... ... ... ...164558... ... ......5,15,164559... ... ... ... ... ...164560... ... ... ... ... ...204570... ... ... ... ... ...204577... ... ... ... ... ...184580... ... ... ... ... ...204585... ... ... ... ... ...204586... ... ... ... ... ...204590... ... ... ... ... 5,154591... ... ......5,15,164700... ... ... ... ... 9,184750... ... ... ... ... ...184777... ... ... ... ... ...195023... ... ... ... ... ...235024... ... ... ... ... ...235025... ... ... ... ... ...235026... ... ... ... ... ...235027... ... ... ... ... ...235028... ... ... ... ... ...235201... ... ... ... ... ...235202... ... ... ... ... ...235203... ... ... ... ... ...235204... ... ... ... ... ...235205... ... ... ... ... ...235206... ... ... ... ... ...235207... ... ... ... ... ...235208... ... ... ... ... ...235209... ... ... ... ... ...235210... ... ... ... ... ...235211... ... ... ... ... ...235212... ... ... ... ... ...235213... ... ... ... ... ...235214... ... ... ... ... ...23
5215... ... ... ... ... ...235216... ... ... ... ... ...235217... ... ... ... ... ...235218... ... ... ... ... ...235219... ... ... ... ... ...235220... ... ... ... ... ...235250... ... ... ... ... ...235255... ... ... ... ... ...236011... ... ... ... ... ...106012... ... ... ... ... ...106013... ... ... ... ... ...106014... ... ... ... ... ...106016... ... ... ... ... ...106017... ... ... ... ... ...106018... ... ... ... ... ...106080... ... ... ... ... ...106999... ... ... ... ... ...256999-100... ... ... ...257000... ... ... ... ... ...257000-100... ... ... ...257001... ... ... ... ... ...257002... ... ... ... ... ...257002-50 . ... ... ... ...257004... ... ... ... ... ...257004-50 . ... ... ... ...257005... ... ... ... ... ...267006... ... ... ... ... ...267007... ... ... ... ... ...267043... ... ... ... ... ...267050... ... ... ... ... ...257055... ... ... ... ... ...257060... ... ... ... ... ...257065... ... ... ... ... ...257070... ... ... ... ... ...257073... ... ... ... ... ...257085... ... ... ... ... ...257090... ... ... ... ... ...257180... ... ... ... ... ...257185... ... ... ... ... ...258001... ... ... ... ... ... 88002... ... ... ... ... ... 88004... ... ... ... ... ... 88006... ... ... ... ... ... 88010... ... ... ... ... ... 88011... ... ... ... ... ... 88013... ... ... ... ... ... 88015... ... ... ... ... ... 8
8030... ... ... ... ... ...138080... ... ... ... ... ... 88245... ... ... ... ... ...128249... ... ... ... ... ...128250... ... ... ... ... ...128250-1000. ... ... ...128252... ... ... ... ... ...128253... ... ... ... ... ...128254... ... ... ... ... ...128260... ... ... ... ... ...128260-1000. ... ... ...128261... ... ... ... ... ...128262... ... ... ... ... ...128266... ... ... ... ... ...128267... ... ... ... ... ...128408... ... ... ... ... ... 88409... ... ... ... ... ... 88410... ... ... ... ... ... 48411... ... ... ... ... ... 48412... ... ... ... ... ... 48413... ... ... ... ... ... 48414... ... ... ... ... ... 78415... ... ... ... ... ... 78416... ... ... ... ... ... 88417... ... ... ... ... ... 88420... ... ... ... ... ... 78440... ... ... ... ... 8,138449... ... ... ... ... ... 78451... ... ... ... ... ... 78455... ... ... ... ... ... 78460... ... ... ... ... ...138515... ... ... ... ... ... 68560... ... ... ... ... ... 69000... ... ... ... ... ...219001... ... ... ... ... ...219002... ... ... ... ... ...2112000. ... ... ... ... ...2412000-144. ... ... ...2412020. ... ... ... ... ...2412025. ... ... ... ... ...2412026. ... ... ... ... ...2412027. ... ... ... ... ...2412029. ... ... ... ... ...2412030. ... ... ... ... ...2412031. ... ... ... ... ...2412032. ... ... ... ... ...2412033. ... ... ... ... ...24
12035. ... ... ... ... ...2412036. ... ... ... ... ...2412037. ... ... ... ... ...2412038. ... ... ... ... ...2412046. ... ... ... ... ...2412047. ... ... ... ... ...2412049. ... ... ... ... ...2412070. ... ... ... ... ...2412071. ... ... ... ... ...2412072. ... ... ... ... ...2412073. ... ... ... ... ...2412080. ... ... ... ... ...2412085. ... ... ... ... ...2412086. ... ... ... ... ...2412087. ... ... ... ... ...2412090. ... ... ... ... ...2412095. ... ... ... ... ...2412096. ... ... ... ... ...2412097. ... ... ... ... ...2458020. ... ... ... ... ...2658022. ... ... ... ... ...2670506. ... ... ... ... ...2670508. ... ... ... ... ...2670510. ... ... ... ... ...2670525. ... ... ... ... 9,2370528. ... ... ... ... 9,2370530. ... ... ... ... ...2370535. ... ... ... ... 9,2370540. ... ... ... ... ... 970559. ... ... ... ... ...2370560. ... ... ... ... ...2370580. ... ... ... ... ...2670595. ... ... ... ... ...2370704. ... ... ... ... ... 670705. ... ... ... ... ... 670706. ... ... ... ... ... 670710. ... ... ... ... ...2370715. ... ... ... ... ...2370720. ... ... ... ... ... 670721. ... ... ... ... ... 670730. ... ... ... ... ... 670778. ... ... ... ... ...2270779. ... ... ... ... ...2270780. ... ... ... ... ...2270785. ... ... ... ... ...2270787. ... ... ... ... ...2270790. ... ... ... ... ...22
70879. ... ... ... ... ...2270880. ... ... ... ... ...2270885. ... ... ... ... ...2270887. ... ... ... ... ...2270890. ... ... ... ... ...2270987. ... ... ... ... ...2296066. ... ... ... ... ...1596074. ... ... ... ... ...1596075. ... ... ... ... ...1596110. ... ... .....15,2696111 . ... ... .....15,2696199. ... ... ... ... ...1396204. ... ... ... ... ...1396206. ... ... ... ... ...1396208. ... ... ... ... ...1396211. ... ... ... ... ...1296212. ... ... ... ... ...1296213. ... ... ... ... ...1296214. ... ... ... ... ...1296215. ... ... ... ... ...1297069. ... ... ... ... ...2697069-50... ... ... ...2697070. ... ... ... ... ...2697070-50... ... ... ...2697071. ... ... ... ... ...2697072. ... ... ... ... ...2697073. ... ... ... ... ...2699817. ... ... ... ... ...2799818. ... ... ... ... ...2799819. ... ... ... ... ...27222400 .. ... ... ... ...24222401 .. ... ... ... ...24335285 .. ... ... ... ...26335286 .. ... ... ... ...26335287 .. ... ... ... ...26335290 .. ... ... ... ...26335291 .. ... ... ... ...26335292 .. ... ... ... ...26MS07362... ... ... ...18MS1000 . ... ... ... ...18MS8000PL ... ... ...18PRA1 . ... ... ... ... ...11PRA2 . ... ... ... ... ...11PUMP4540-55.. ...18
Prod No. Page Prod No. Page Prod No. Page Prod No. Page Prod No. Page Prod No. Page Prod No. Page
Thank you for your interest in International Epoxies & Sealers! It is our objective to provide our customers with the highest quality products and services at the fairest prices. This is backed by a professional Sales force and professional office, warehouse, manufacturing and research/development staffs which, when combined, result in an unbeatable team to serve our customer’s needs.
International Epoxies & Sealers™P.O. Box 185
San Antonio, FL 33576
Toll Free Phone (800) 451-7206Toll Free Fax (866) 239-0328
© International Epoxies & Sealers™ All Rights Reserved.
Our Customer Service Department is available to take your order or to answer
questions from 7:30 to 4:00 pm EST.Faxed orders can be sent 24 hours a day,
TOLL FREE, to 1-866-239-0328.
We look forward to serving you!
MISSION STATEMENT
INTER-MIX™ Application Chart 1-2Product Interchange Chart 3Body Sealers 4-6Panel Bonding Adhesives 6-7Expandable Foams 7Plastic Repair 8-11Static Mixers/Zip-Tips 12Applicator Guns 12-13General Adhesives 13-14Glass Sealers/Adhesives 15Coatings 16Primers 17
INTER-MIX™ Application Chart 1-2Product Interchange Chart 3Body Sealers 4-6Panel Bonding Adhesives 6-7Expandable Foams 7Plastic Repair 8-11Static Mixers/Zip-Tips 12Applicator Guns 12-13General Adhesives 13-14Glass Sealers/Adhesives 15Coatings 16Primers 17
TABLE OF CONTENTSTABLE OF CONTENTS
Paints 17Specialty Cleaners 18Service Aids 19-20Cleaning Aids 21Body/Emblem Moulding Tape 22Miscellaneous Tape 23Weatherstrip 23Drill Bits 24Abrasives 25Miscellaneous 26Cabinet/Wall Rack 27
Paints 17Specialty Cleaners 18Service Aids 19-20Cleaning Aids 21Body/Emblem Moulding Tape 22Miscellaneous Tape 23Weatherstrip 23Drill Bits 24Abrasives 25Miscellaneous 26Cabinet/Wall Rack 27
NUMERICAL INDEXNUMERICAL INDEX
219. ... ... ... ... ... ...14225. ... ... ... ... ... ...14226. ... ... ... ... ... ...14230. ... ... ... ... ... ...13612. ... ... ... ... .. 9,14622. ... ... ... ... ... 9,14631. ... ... ... ... ... 9,14650. ... ... ... ... ... 9,14670. ... ... ... ... ... ...15722. ... ... ... ... ... ...19723. ... ... ... ... ... ...19724. ... ... ... ... ... ...19742. ... ... ... ... ... ...19743. ... ... ... ... ... ...19744. ... ... ... ... ... ...19771. ... ... ... ... ... ...19772. ... ... ... ... ... ...19774. ... ... ... ... ... ...19790. ... ... ... ... ... ...19791. ... ... ... ... ... ...19794. ... ... ... ... ... ...191000... ... ... ... ... ...211015... ... ... ... ... ...211201... ... ... ... 15,191203... ... ... ... 15,191210... ... ... ... ... ...191211... ... ... ... ... ...191212... ... ... ... ... ...191412... ... ... ... ... ...201450... ... ... ... ... ...191470... ... ... ... ... ...201508... ... ... ... ... ... 51511... ... ... ... ... ... 41512... ... ... ... ... ... 41514... ... ... ... ... ...151515... ... ... ... ... ...151516... ... ... ... ... ...151525... ... ... ... ... ...141535... ... ... ... ... ...141540... ... ... ... ... ... 41541... ... ... ... ... ... 41545... ... ... ... ... ... 41546... ... ... ... ... ... 41548... ... ... ... ... ... 41560... ... ... ... ... ... 51565... ... ... ... ... ... 51570... ... ... ... ... ... 5
1571... ... ... ... ... 5,131575... ... ... ... ... ...131576... ... ... ... ... ...131577... ... ... ... ... ...131578... ... ... ... ... ...131581... ... ... ... ... ... 51585... ... ... ... ... ... 51587... ... ... ... ... ... 51588... ... ... ... ... ... 51600... ... ... ... ... ...161601... ... ... ... ... ...161660... ... ... ... ... ...161680... ... ... ... ... ...161685... ... ... ... ... ...161690... ... ... ... ... ...161700... ... ... ... ... 9,181701... ... ... ... ... 9,181702... ... ... ... ... 9,181703... ... ... ... ... 9,181750... ... ... ... ... ...181752... ... ... ... ... ...181753... ... ... ... ... ...181840... ... ... ... ... 7,174004... ... ... ... ... ...154010... ... ... ... ... ...154016... ... ... ... ... ...154182... ... ... ... ... 9,174185... ... ... ... ... 9,174186... ... ... ... ... ...174187... ... ... ... ... ...174189... ... ... ... ... ...174192... ... ... ... ... ...174193... ... ... ... ... ...174195... ... ... ... ... ...174201... ... ... ... ... ...174203... ... ... ... ... ...174205... ... ... ... ... ...174503... ... ...... 14,194504... ... ... ... ... ...204505... ... ... ... ... ...204509... ... ... ... ... ...164511... ... ... ... ... ...214513... ... ... ... ... ...164516... ... ... ... ... ...204518... ... ... ... ... ...174519... ... ... ... ... ...174520... ... ... ... ... ...14
4521... ... ... ... ... ...184522... ... ... ... ... 9,164523... ... ... ... ... ...164524... ... ... ... ... ...164525... ... ... ... ... ...174526... ... ... ... ... ...174530... ... ... ... ... ...174535... ... ... ... ... ...214537... ... ... ... ... ...214538... ... ... ... ... ...214540... ... ... ... ... ...184540-55 . ... ... ... ...184550... ... ... ... ... ...194557... ... ... ... ... ...164558... ... ......5,15,164559... ... ... ... ... ...164560... ... ... ... ... ...204570... ... ... ... ... ...204577... ... ... ... ... ...184580... ... ... ... ... ...204585... ... ... ... ... ...204586... ... ... ... ... ...204590... ... ... ... ... 5,154591... ... ......5,15,164700... ... ... ... ... 9,184750... ... ... ... ... ...184777... ... ... ... ... ...195023... ... ... ... ... ...235024... ... ... ... ... ...235025... ... ... ... ... ...235026... ... ... ... ... ...235027... ... ... ... ... ...235028... ... ... ... ... ...235201... ... ... ... ... ...235202... ... ... ... ... ...235203... ... ... ... ... ...235204... ... ... ... ... ...235205... ... ... ... ... ...235206... ... ... ... ... ...235207... ... ... ... ... ...235208... ... ... ... ... ...235209... ... ... ... ... ...235210... ... ... ... ... ...235211... ... ... ... ... ...235212... ... ... ... ... ...235213... ... ... ... ... ...235214... ... ... ... ... ...23
5215... ... ... ... ... ...235216... ... ... ... ... ...235217... ... ... ... ... ...235218... ... ... ... ... ...235219... ... ... ... ... ...235220... ... ... ... ... ...235250... ... ... ... ... ...235255... ... ... ... ... ...236011... ... ... ... ... ...106012... ... ... ... ... ...106013... ... ... ... ... ...106014... ... ... ... ... ...106016... ... ... ... ... ...106017... ... ... ... ... ...106018... ... ... ... ... ...106080... ... ... ... ... ...106999... ... ... ... ... ...256999-100... ... ... ...257000... ... ... ... ... ...257000-100... ... ... ...257001... ... ... ... ... ...257002... ... ... ... ... ...257002-50 . ... ... ... ...257004... ... ... ... ... ...257004-50 . ... ... ... ...257005... ... ... ... ... ...267006... ... ... ... ... ...267007... ... ... ... ... ...267043... ... ... ... ... ...267050... ... ... ... ... ...257055... ... ... ... ... ...257060... ... ... ... ... ...257065... ... ... ... ... ...257070... ... ... ... ... ...257073... ... ... ... ... ...257085... ... ... ... ... ...257090... ... ... ... ... ...257180... ... ... ... ... ...257185... ... ... ... ... ...258001... ... ... ... ... ... 88002... ... ... ... ... ... 88004... ... ... ... ... ... 88006... ... ... ... ... ... 88010... ... ... ... ... ... 88011... ... ... ... ... ... 88013... ... ... ... ... ... 88015... ... ... ... ... ... 8
8030... ... ... ... ... ...138080... ... ... ... ... ... 88245... ... ... ... ... ...128249... ... ... ... ... ...128250... ... ... ... ... ...128250-1000. ... ... ...128252... ... ... ... ... ...128253... ... ... ... ... ...128254... ... ... ... ... ...128260... ... ... ... ... ...128260-1000. ... ... ...128261... ... ... ... ... ...128262... ... ... ... ... ...128266... ... ... ... ... ...128267... ... ... ... ... ...128408... ... ... ... ... ... 88409... ... ... ... ... ... 88410... ... ... ... ... ... 48411... ... ... ... ... ... 48412... ... ... ... ... ... 48413... ... ... ... ... ... 48414... ... ... ... ... ... 78415... ... ... ... ... ... 78416... ... ... ... ... ... 88417... ... ... ... ... ... 88420... ... ... ... ... ... 78440... ... ... ... ... 8,138449... ... ... ... ... ... 78451... ... ... ... ... ... 78455... ... ... ... ... ... 78460... ... ... ... ... ...138515... ... ... ... ... ... 68560... ... ... ... ... ... 69000... ... ... ... ... ...219001... ... ... ... ... ...219002... ... ... ... ... ...2112000. ... ... ... ... ...2412000-144. ... ... ...2412020. ... ... ... ... ...2412025. ... ... ... ... ...2412026. ... ... ... ... ...2412027. ... ... ... ... ...2412029. ... ... ... ... ...2412030. ... ... ... ... ...2412031. ... ... ... ... ...2412032. ... ... ... ... ...2412033. ... ... ... ... ...24
12035. ... ... ... ... ...2412036. ... ... ... ... ...2412037. ... ... ... ... ...2412038. ... ... ... ... ...2412046. ... ... ... ... ...2412047. ... ... ... ... ...2412049. ... ... ... ... ...2412070. ... ... ... ... ...2412071. ... ... ... ... ...2412072. ... ... ... ... ...2412073. ... ... ... ... ...2412080. ... ... ... ... ...2412085. ... ... ... ... ...2412086. ... ... ... ... ...2412087. ... ... ... ... ...2412090. ... ... ... ... ...2412095. ... ... ... ... ...2412096. ... ... ... ... ...2412097. ... ... ... ... ...2458020. ... ... ... ... ...2658022. ... ... ... ... ...2670506. ... ... ... ... ...2670508. ... ... ... ... ...2670510. ... ... ... ... ...2670525. ... ... ... ... 9,2370528. ... ... ... ... 9,2370530. ... ... ... ... ...2370535. ... ... ... ... 9,2370540. ... ... ... ... ... 970559. ... ... ... ... ...2370560. ... ... ... ... ...2370580. ... ... ... ... ...2670595. ... ... ... ... ...2370704. ... ... ... ... ... 670705. ... ... ... ... ... 670706. ... ... ... ... ... 670710. ... ... ... ... ...2370715. ... ... ... ... ...2370720. ... ... ... ... ... 670721. ... ... ... ... ... 670730. ... ... ... ... ... 670778. ... ... ... ... ...2270779. ... ... ... ... ...2270780. ... ... ... ... ...2270785. ... ... ... ... ...2270787. ... ... ... ... ...2270790. ... ... ... ... ...22
70879. ... ... ... ... ...2270880. ... ... ... ... ...2270885. ... ... ... ... ...2270887. ... ... ... ... ...2270890. ... ... ... ... ...2270987. ... ... ... ... ...2296066. ... ... ... ... ...1596074. ... ... ... ... ...1596075. ... ... ... ... ...1596110. ... ... .....15,2696111 . ... ... .....15,2696199. ... ... ... ... ...1396204. ... ... ... ... ...1396206. ... ... ... ... ...1396208. ... ... ... ... ...1396211. ... ... ... ... ...1296212. ... ... ... ... ...1296213. ... ... ... ... ...1296214. ... ... ... ... ...1296215. ... ... ... ... ...1297069. ... ... ... ... ...2697069-50... ... ... ...2697070. ... ... ... ... ...2697070-50... ... ... ...2697071. ... ... ... ... ...2697072. ... ... ... ... ...2697073. ... ... ... ... ...2699817. ... ... ... ... ...2799818. ... ... ... ... ...2799819. ... ... ... ... ...27222400 .. ... ... ... ...24222401 .. ... ... ... ...24335285 .. ... ... ... ...26335286 .. ... ... ... ...26335287 .. ... ... ... ...26335290 .. ... ... ... ...26335291 .. ... ... ... ...26335292 .. ... ... ... ...26MS07362... ... ... ...18MS1000 . ... ... ... ...18MS8000PL ... ... ...18PRA1 . ... ... ... ... ...11PRA2 . ... ... ... ... ...11PUMP4540-55.. ...18
Prod No. Page Prod No. Page Prod No. Page Prod No. Page Prod No. Page Prod No. Page Prod No. Page
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Please refer to Product Technical Instructions for applications and directionsPlease refer to Product Technical Instructions for applications and directions
8412 10 oz. cartridgeINTER–MIX 5
Adhesive/Sealer
5 Minute
A non-sagging, semi-flexible adhesive/sealant.
A firm, yet flexible seam sealer with excellentadhesion to: SMC, fiberglass, metal, aluminum and most plastics. Used for sealing vertical & horizontal seams and joints.
Working 5 to 10 min.
Handling 10 to 20 min.
Sandable 20 to 30 min.
Paintable 20 to 30 min.
Full Cure 6 to 8 hours
8411 10 oz. cartridgeINTER–MIX 15
Adhesive/Sealer
15 Minute
A non-sagging, semi-flexible adhesive/sealant.
A firm, yet flexible seam sealer with excellentadhesion to: SMC, fiberglass, metal, aluminum and most plastics. Used for sealing vertical & horizontal seams and joints.
Working 15 to 20 min.
Handling 20 to 30 min.
Sandable 45 min.
Paintable 45 min.
Full Cure 6 to 8 hours
Flowable Seam Sealer
30 Minute
INTER–MIX 308410 10 oz. cartridge A flowable, self-leveling
semi-flexible seam sealer with no tooling required.
Designed for sealing roof seams, drip rails and other horizontal seams. For roof panels and various other horizontal applications on F-Series Truck’s & SUV’s.
Working 20 to 30 min.
Handling 30 to 45 min.
Sandable 60 min.
Paintable 60 min.
Full Cure 6 to 8 hours
INTER–MIX 15
Adhesive/Sealer
15 Minute
8413 10 oz. cartridge A non-sagging, extremelyflexible adhesive/sealant.
A firm, very flexible seam sealer with excellent adhesion to: SMC, fiberglass, metal, aluminum and most plastics. Used for sealing vertical & horizontal seams and joints.
Working 15 to 20 min.
Handling 20 to 30 min.
Sandable 45 min.
Paintable 45 min.
Full Cure 6 to 8 hours
TIMESAPPLICATIONS/USESNUMBERS DESCRIPTIONPRODUCT
INTER–MIX™ • INTER-WELD™ • INTER-FOAM™INTER–MIX™ • INTER-WELD™ • INTER-FOAM™ & HAND MIX APPLICATION GUIDES& HAND MIX APPLICATION GUIDES
SEALERSSEALERS
INTER–MIX 45
Door Skin Adhesive
45 Minute
8415 10 oz. cartridge A high strength two part epoxy/adhesive.
Designed for bonding and sealing primed metal and SMC plastic-type door skins and panels with flanges. NOTE: Not for Camaro or Firebird late model door skins!
NOTE: Not for Camaro or Firebird late model door skins!
Working 40 to 60 min.
Handling 60 min.
Sandable 60 min.
Paintable 60 min.
Full Cure 6 to 8 hours
INTER–MIX 60
Metal Panel Bond
60 Minute
8420 10 oz. cartridge A heavy bodied, high strength epoxy adhesive.For Non-Structural Use Only!
Designed for bonding and sealing all automotive type steels and aluminum. Used in the replacement of qtr. panels, roof panels, door skins, truck box sides & other outer body sheet metal.
Working 50 to 60 min.
Handling 4 to 6 hours
Full Cure 24 hours
INTER-WELD 60 MSA is a 1:1 methacrylate structural adhesive featuring an extended open time.
Formulated for outstanding adhesion to a wide variety of materials, including metal, fiberglass, composites, vinyl esters, gelcoats and thermoplastics.
INTER–WELD 60
MSA Adhesive
60 Minute
8560 10 oz. cartridge
Working 55 to 60 min.
Handling 90 to 130 min.
Full Cure 24 hours
8515 10 oz. cartridge INTER-WELD 60 MSA is a 1:1 methacrylatestructural adhesive.
Fo r m u l a t e d t o b o n d e n g i n e e r e d thermoplastics, thermosets, composites and metal structural elements together in any combination. Forms a tough, high strength, high impact resistant bond in all gaps.
INTER–WELD 15
MSA Adhesive
15 Minute Working 10 to 15 min.
Handling 25 to 30 min.
Full Cure 24 hours
BONDING ADHESIVESBONDING ADHESIVES
11 Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Please refer to Product Technical Instructions for applications and directionsPlease refer to Product Technical Instructions for applications and directions
INTER–MIX™ • INTER-WELD™ • INTER-FOAM™INTER–MIX™ • INTER-WELD™ • INTER-FOAM™ & HAND MIX APPLICATION GUIDES& HAND MIX APPLICATION GUIDES
Full Cure 30 to 45 min.
22
INTER–MIX 5
Epoxy Clear QuickSetting Adhesive
5 Minute
8460 5 oz. cartridge A two part rigid/semi-rigid high strength adhesive, filler, laminator and surfacer.
Bonding, repairing or surfacing SMC, fiberglass, most plastics, steel, aluminum, glass, wood and concrete.
(Hand-Mix)
8485 50mL. cartridge
8030 30 mL syringe kit
Working 5 min.
Handling 10 to 15 min.
Sandable 15 to 30 min.
Paintable 15 to 30 min.
Full Cure 6 to 8 hours
A fast set, two part high strength adhesive, filler, and surfacer.
A fast set epoxy repair compound used for bonding, filling and finishing. Used on plastics, FRP, SMC, fiberglass and metal parts.
Working 40 to 50 sec.
Handling 5 to 10 min.
Full Cure 6 to 8 hours
QUICKIE-FIX 40
Repairs Plastic &Metal Parts
40 Seconds
8440 50mL. cartridge
Sandable 15 to 30 min.
Paintable 20 to 30 min.
GENERAL REPAIRGENERAL REPAIR
PLASTIC REPAIRPLASTIC REPAIR
TIMESAPPLICATIONS/USESNUMBERS DESCRIPTIONPRODUCT
FOAMSFOAMS
INTER–FOAM 10
Rigid Foam
10 Seconds
8455 10 oz. cartridge A two part rigid urethane foam formulated to expand 10 times its original volume.
Fills and reinforces pillar posts & box sections. Also stops wind, water and dust leaks. Eliminated panel flutter on cross members & provides sound deadening & compressive strength.
Working 10 to 25 sec.
Handling 3 to 4 min.
Sandable not applicable
Paintable 10 to 15 min.
Full Cure 30 to 45 min.
INTER–FOAM 5
Flexible Foam
5 Seconds
8451 10 oz. cartridge A two part flexible urethane foam formulated to ex-pand 10 times its original volume. Will not bow out body panels.
Stops wind noise, water leaks & flutter in pillar posts, quarter panels, wheel housings & weather strips. Adds reinforcement to panels such as door skin brace, roof & hood panels.
Working 3 to 5 sec.
Handling 2 to 3 min.
Sandable not applicable
Paintable 10 to 15 min.
Full Cure 10 to 15 min.
8449 50 mL cartridge
INTER–MIX 40sec
Flexible/Semi-Flexible
40 Seconds
8409 10 oz. cartridge Designed for bonding flexible/semi-flexible substrates such as polyurethane, rubber and other automotive parts.
An extra-fast setting, two part high strength epoxy adhesive, filler and surfacer.
Working 40 to 50 sec.
Handling 5 to 10 min.
Sandable 15 to 20 min.
Paintable 20 to 30 min.
Full Cure 6 to 8 hours
INTER–MIX 5
Hi–Stress Epoxy
5 Minute
An two part high strength rigid to semi-rigid epoxy adhesive, filler and surfacer.
8416 10 oz. cartridge
8001 10 oz. tube kit(Hand-Mix)
Bonding, repairing or surfacing SMC, TPO, rigid plastics, fiberglass, steel, aluminum, glass and other rigid/semi-rigid type materials.
Working 5 to 10 min.
Handling 10 to 15 min.
Sandable 10 to 20 min.
Paintable 10 to 20 min.
Full Cure 6 to 8 hours
INTER–MIX 40sec
Rigid/Semi-Rigid
40 Seconds
8408 10 oz. cartridge Bonding, repairing or surfacing SMC, TPO, rigid plastics, fiberglass, steel, aluminum, glass and other rigid/semi-rigid type materials.
An extra fast, two-part high strength semi-rigid to rigid epoxy adhesive, filler & surfacer.
Working 40 to 50 sec.
Handling 5 to 10 min.
Sandable 15 to 20 min.
Paintable 20 to 30 min.
Full Cure 6 to 8 hours
EASY–SAND
Rigid/Flexible
5 Minute
An easy sanding two part epoxy adhesive, filler and surfacer designed for repairing most plastics.
8080 10 oz. tube kit EASY-SAND was designed for use on rigid and flexible parts as an adhesive, filler and surfacer, in thin amounts (skim coat). Use of EASY-SAND in thick layers will result in less flexibility.
(Hand-Mix)
Working 5 min. approx.
Handling 10 to 15 min.
Sandable 15 to 30 min.
Paintable 10 to 20 min.
Full Cure 6 to 8 hours
INTER–MIX 5
Epoxyflex
5 Minutes
8417 10 oz. cartridge A two part high strength flexible epoxy adhesive, filler & surfacer.
Bonding, repairing or surfacing urethane and TPO bumpers, filler panels and most flexible plastic parts and window channels.(Hand-Mix)
Working 5 to 10 min.
Handling 10 to 15 min.
Sandable 10 to 20 min.
Paintable 10 to 20 min.
Full Cure 6 to 8 hours
8010 10 oz. tube kit
8414 10 oz. cartridge A non-sag, high strength epoxy /adhesive. For use in truck, automotive & marine applications
Designed to provide tough, durable bonds to SMC panels, metal space frames and fiberglass. This product is ideal for splicing as well as complete panel replacement.
INTER–MIX 60INTER–MIX 60
SMC Panel BondSMC Panel Bond
60 Minute60 Minute Working 50 to 60 min.
Handling 4 to 6 hours
Full Cure 24 hours
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Please refer to Product Technical Instructions for applications and directionsPlease refer to Product Technical Instructions for applications and directions
8412 10 oz. cartridgeINTER–MIX 5
Adhesive/Sealer
5 Minute
A non-sagging, semi-flexible adhesive/sealant.
A firm, yet flexible seam sealer with excellentadhesion to: SMC, fiberglass, metal, aluminum and most plastics. Used for sealing vertical & horizontal seams and joints.
Working 5 to 10 min.
Handling 10 to 20 min.
Sandable 20 to 30 min.
Paintable 20 to 30 min.
Full Cure 6 to 8 hours
8411 10 oz. cartridgeINTER–MIX 15
Adhesive/Sealer
15 Minute
A non-sagging, semi-flexible adhesive/sealant.
A firm, yet flexible seam sealer with excellentadhesion to: SMC, fiberglass, metal, aluminum and most plastics. Used for sealing vertical & horizontal seams and joints.
Working 15 to 20 min.
Handling 20 to 30 min.
Sandable 45 min.
Paintable 45 min.
Full Cure 6 to 8 hours
Flowable Seam Sealer
30 Minute
INTER–MIX 308410 10 oz. cartridge A flowable, self-leveling
semi-flexible seam sealer with no tooling required.
Designed for sealing roof seams, drip rails and other horizontal seams. For roof panels and various other horizontal applications on F-Series Truck’s & SUV’s.
Working 20 to 30 min.
Handling 30 to 45 min.
Sandable 60 min.
Paintable 60 min.
Full Cure 6 to 8 hours
INTER–MIX 15
Adhesive/Sealer
15 Minute
8413 10 oz. cartridge A non-sagging, extremelyflexible adhesive/sealant.
A firm, very flexible seam sealer with excellent adhesion to: SMC, fiberglass, metal, aluminum and most plastics. Used for sealing vertical & horizontal seams and joints.
Working 15 to 20 min.
Handling 20 to 30 min.
Sandable 45 min.
Paintable 45 min.
Full Cure 6 to 8 hours
TIMESAPPLICATIONS/USESNUMBERS DESCRIPTIONPRODUCT
INTER–MIX™ • INTER-WELD™ • INTER-FOAM™INTER–MIX™ • INTER-WELD™ • INTER-FOAM™ & HAND MIX APPLICATION GUIDES& HAND MIX APPLICATION GUIDES
SEALERSSEALERS
INTER–MIX 45
Door Skin Adhesive
45 Minute
8415 10 oz. cartridge A high strength two part epoxy/adhesive.
Designed for bonding and sealing primed metal and SMC plastic-type door skins and panels with flanges. NOTE: Not for Camaro or Firebird late model door skins!
NOTE: Not for Camaro or Firebird late model door skins!
Working 40 to 60 min.
Handling 60 min.
Sandable 60 min.
Paintable 60 min.
Full Cure 6 to 8 hours
INTER–MIX 60
Metal Panel Bond
60 Minute
8420 10 oz. cartridge A heavy bodied, high strength epoxy adhesive.For Non-Structural Use Only!
Designed for bonding and sealing all automotive type steels and aluminum. Used in the replacement of qtr. panels, roof panels, door skins, truck box sides & other outer body sheet metal.
Working 50 to 60 min.
Handling 4 to 6 hours
Full Cure 24 hours
INTER-WELD 60 MSA is a 1:1 methacrylate structural adhesive featuring an extended open time.
Formulated for outstanding adhesion to a wide variety of materials, including metal, fiberglass, composites, vinyl esters, gelcoats and thermoplastics.
INTER–WELD 60
MSA Adhesive
60 Minute
8560 10 oz. cartridge
Working 55 to 60 min.
Handling 90 to 130 min.
Full Cure 24 hours
8515 10 oz. cartridge INTER-WELD 60 MSA is a 1:1 methacrylatestructural adhesive.
Fo r m u l a t e d t o b o n d e n g i n e e r e d thermoplastics, thermosets, composites and metal structural elements together in any combination. Forms a tough, high strength, high impact resistant bond in all gaps.
INTER–WELD 15
MSA Adhesive
15 Minute Working 10 to 15 min.
Handling 25 to 30 min.
Full Cure 24 hours
BONDING ADHESIVESBONDING ADHESIVES
11 Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Please refer to Product Technical Instructions for applications and directionsPlease refer to Product Technical Instructions for applications and directions
INTER–MIX™ • INTER-WELD™ • INTER-FOAM™INTER–MIX™ • INTER-WELD™ • INTER-FOAM™ & HAND MIX APPLICATION GUIDES& HAND MIX APPLICATION GUIDES
Full Cure 30 to 45 min.
22
INTER–MIX 5
Epoxy Clear QuickSetting Adhesive
5 Minute
8460 5 oz. cartridge A two part rigid/semi-rigid high strength adhesive, filler, laminator and surfacer.
Bonding, repairing or surfacing SMC, fiberglass, most plastics, steel, aluminum, glass, wood and concrete.
(Hand-Mix)
8485 50mL. cartridge
8030 30 mL syringe kit
Working 5 min.
Handling 10 to 15 min.
Sandable 15 to 30 min.
Paintable 15 to 30 min.
Full Cure 6 to 8 hours
A fast set, two part high strength adhesive, filler, and surfacer.
A fast set epoxy repair compound used for bonding, filling and finishing. Used on plastics, FRP, SMC, fiberglass and metal parts.
Working 40 to 50 sec.
Handling 5 to 10 min.
Full Cure 6 to 8 hours
QUICKIE-FIX 40
Repairs Plastic &Metal Parts
40 Seconds
8440 50mL. cartridge
Sandable 15 to 30 min.
Paintable 20 to 30 min.
GENERAL REPAIRGENERAL REPAIR
PLASTIC REPAIRPLASTIC REPAIR
TIMESAPPLICATIONS/USESNUMBERS DESCRIPTIONPRODUCT
FOAMSFOAMS
INTER–FOAM 10
Rigid Foam
10 Seconds
8455 10 oz. cartridge A two part rigid urethane foam formulated to expand 10 times its original volume.
Fills and reinforces pillar posts & box sections. Also stops wind, water and dust leaks. Eliminated panel flutter on cross members & provides sound deadening & compressive strength.
Working 10 to 25 sec.
Handling 3 to 4 min.
Sandable not applicable
Paintable 10 to 15 min.
Full Cure 30 to 45 min.
INTER–FOAM 5
Flexible Foam
5 Seconds
8451 10 oz. cartridge A two part flexible urethane foam formulated to ex-pand 10 times its original volume. Will not bow out body panels.
Stops wind noise, water leaks & flutter in pillar posts, quarter panels, wheel housings & weather strips. Adds reinforcement to panels such as door skin brace, roof & hood panels.
Working 3 to 5 sec.
Handling 2 to 3 min.
Sandable not applicable
Paintable 10 to 15 min.
Full Cure 10 to 15 min.
8449 50 mL cartridge
INTER–MIX 40sec
Flexible/Semi-Flexible
40 Seconds
8409 10 oz. cartridge Designed for bonding flexible/semi-flexible substrates such as polyurethane, rubber and other automotive parts.
An extra-fast setting, two part high strength epoxy adhesive, filler and surfacer.
Working 40 to 50 sec.
Handling 5 to 10 min.
Sandable 15 to 20 min.
Paintable 20 to 30 min.
Full Cure 6 to 8 hours
INTER–MIX 5
Hi–Stress Epoxy
5 Minute
An two part high strength rigid to semi-rigid epoxy adhesive, filler and surfacer.
8416 10 oz. cartridge
8001 10 oz. tube kit(Hand-Mix)
Bonding, repairing or surfacing SMC, TPO, rigid plastics, fiberglass, steel, aluminum, glass and other rigid/semi-rigid type materials.
Working 5 to 10 min.
Handling 10 to 15 min.
Sandable 10 to 20 min.
Paintable 10 to 20 min.
Full Cure 6 to 8 hours
INTER–MIX 40sec
Rigid/Semi-Rigid
40 Seconds
8408 10 oz. cartridge Bonding, repairing or surfacing SMC, TPO, rigid plastics, fiberglass, steel, aluminum, glass and other rigid/semi-rigid type materials.
An extra fast, two-part high strength semi-rigid to rigid epoxy adhesive, filler & surfacer.
Working 40 to 50 sec.
Handling 5 to 10 min.
Sandable 15 to 20 min.
Paintable 20 to 30 min.
Full Cure 6 to 8 hours
EASY–SAND
Rigid/Flexible
5 Minute
An easy sanding two part epoxy adhesive, filler and surfacer designed for repairing most plastics.
8080 10 oz. tube kit EASY-SAND was designed for use on rigid and flexible parts as an adhesive, filler and surfacer, in thin amounts (skim coat). Use of EASY-SAND in thick layers will result in less flexibility.
(Hand-Mix)
Working 5 min. approx.
Handling 10 to 15 min.
Sandable 15 to 30 min.
Paintable 10 to 20 min.
Full Cure 6 to 8 hours
INTER–MIX 5
Epoxyflex
5 Minutes
8417 10 oz. cartridge A two part high strength flexible epoxy adhesive, filler & surfacer.
Bonding, repairing or surfacing urethane and TPO bumpers, filler panels and most flexible plastic parts and window channels.(Hand-Mix)
Working 5 to 10 min.
Handling 10 to 15 min.
Sandable 10 to 20 min.
Paintable 10 to 20 min.
Full Cure 6 to 8 hours
8010 10 oz. tube kit
8414 10 oz. cartridge A non-sag, high strength epoxy /adhesive. For use in truck, automotive & marine applications
Designed to provide tough, durable bonds to SMC panels, metal space frames and fiberglass. This product is ideal for splicing as well as complete panel replacement.
INTER–MIX 60INTER–MIX 60
SMC Panel BondSMC Panel Bond
60 Minute60 Minute Working 50 to 60 min.
Handling 4 to 6 hours
Full Cure 24 hours
PRO
DUC
T INTER
CH
AN
GE R
EFEREN
CE - D
ua
l Co
mp
on
en
t Prod
uc
tsPRO
DUC
T INTER
CH
AN
GE R
EFEREN
CE - D
ua
l Co
mp
on
en
t Prod
uc
ts
RU
Su
ty
SD
LS
-L
Re
PO
DC
TIE
Ken
tD
ramix
Oa
eE
Mo
min
ion
Tran-
ord
UC
Crest
Wu
rthU
PO
ub
br
3MS
S
rl
se
UE
Bo
dy
Titeu
e Sea
Star
Fu
or
Sal
Pn
8
27
F7
20
88
SM
C
aelB
ond414
CW
454188
800
39337R
NT
R12
020
218
88
9A
dhesive560
3933012
021
8515a
a
ln
13
89
00
Met
lPne
Bo
d8420
06384176
3957
108
1.0125U
P9
428115
hT
68
9P
0A
desive
8560K
1238
41710
U9
529
8515417
Me
aa
cP
n5
Pt
l Pt
h a
el8
15U
9032B
nod MS
A15
Sl
e4
48
38
00
4C
-3
P-
2e
fLveling
810
F-61
2282013
937
100
412
122F
SL
8939100
U9082
EU
75
08305S
l
30
4eam
Sea
er9380
125890.
1208307
Nn
S
8-
46
03
50
59
4P
7-
2o
ag
411F
6022
8214
937000
0141
2123
CF
-SS
89310
0U
902
EU
74
08306S
4
00
33
eamS
ealer8
12126
89.
1208
084813
0
70
61
0P
89
22
Door
Skin
8415D
S-A
417782
083934
300
102
082
35C
F-
A93
100
0828
ev
12
Adh
sie
150009
0829
gC
09
74
1R
89
U2
2R
iid
8416W
II4036
8202
376
013021082
022010
CF
-S93
1017P
902
0836
ie
i8
10
97
11
92
Plastc R
par
00*
440
393
101
110203
20208
0900208
37n
09
7(5 m
i.)
450
394
15008931017891.0129
s
06
0P
Rigid
Pla
tic84
810
134
40U
911208234
a4
K1
0U
2R
epir (
0 sec.)T
31394
50P
90108235
li
c1
0
09
48
10
16
3F
exble P
lasti84
7C
WI
430
8201
3927
00105*
10520
0C
F-F
X8939
01082
2*
00
10
03
Repair (5 m
in.)8010
431
1407C1
620
089
903
0823
31
8910
6l
ic
03
Fex
ble Plasti
84094040
820
(0
s0
3R
epair 4
ec.)
405082
1l
ia
1-
34
2F
92
06
Fex
ble Fo
m845
UW
S4320
3957
1761
1C
F-
UP
1284
29
32
90
6844
430
14
UP
13284
35
430
ia
85
90
Rgid F
om
45U
W-R
3997
UP
9142E
U-723
845708458
le
a8
01
96
Cear G
enr
l43
P0561
3987
1400821
p
se
80
-1
7P
urose
Adhe
iv46
CB
114
0821
n8
50
01
Side
Cha
nel440
P1059
893319
00864
lss
eve
8P
5G
a A
dhsi
41768
1s
n8
1/
4E
ay-S
ad
800*
421
3e
F0
Flexibl
/Sem
i-lex
8409U
P9
62
pe
GP
0D
ualDis
ens
un96212
U9
02
Se
*queez
Tube
33 Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Body SealersBody Sealerswww.internationalepoxies.comwww.internationalepoxies.com
44
INTER-MIX™ 5 SEAM SEALER / ADHESIVESets in approx. 5 minutes*
A non-sagging, firm, semi-flexible adhesive/sealant used for sealing vertical and horizontal seams and joints on automobiles and trucks. Can be used to reinforce and eliminate flutter and vibration of body panel cross members.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8412 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
INTER-MIX™ 15 SEAM SEALER / ADHESIVESets in approx. 15 minutes*
A non-sagging, firm, semi-flexible adhesive/sealant used for sealing vertical and horizontal seams and joints on automobiles and trucks. Can be used to reinforce and eliminate flutter and vibration of body panel cross members.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8411 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
INTER-MIX™ 30 FLOWABLE SEAM SEALERSets in approx. 30 minutes*
A self leveling seam sealer designed for sealing roof seams and drip rails on Ford F-Series Pick Ups, Vans, SUV’s and various other horizontal applications.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8410 10 fl. oz. kit (300mL) 4
(w/ 2 static mixers and one 1/2”and one 1” Ribbon Zip-Tip)
INTER-MIX™ 15 SEAM SEALER / ADHESIVEFLEXIBLESets in approx. 15 minutes*
A non-sagging, extremely flexible adhesive/sealant used for sealing vertical and horizontal seams and joints on automobiles and trucks. Can be used to reinforce and eliminate flutter and vibration of body panel cross members. Excellent for pickup beds and around hinges.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8413 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
Prod. No. Size Units/Case
1512 10.5 fl. oz. cartridge 12
INTER-SEAL™ (WHITE)High Technology Joint & Seam Sealer
A permanent, flexible, all purpose automotive sealant for autobody drip rails, seams, cracks and joints. Can be smoothed to a fine feathered edge, even after it has skinned, by using IES #1700 or #4700 Super Cleaning Solvent.
Seals wet or dry.Fast skinning, can be painted after skin is formed.
BRUSHABLE SEAM SEALER WHITE
A fast setting, permanent flexible sealant. Used for sealing vertical and horizontal seams and joints on automotive and truck floor pans, trunks. firewalls, lab seams, etc.
Matches OEM brushed in sealers. Can be painted over in 20-30 minutes. Excellent adhesion to painted, bare or primed metal. Seals wet or dry.
Prod. No. Size Units/Case
1511 32 fl. oz. can 4
FIRM & FLEXIBLE CLEAR
Firm & Flexible Clear Automotive Seam Sealer is a fast setting, firm yet flexible clear sealant with excellent adhesion to most surfaces.
Can be painted over within 30 minutes. Will not crack or peel and stays clear. Most automotive paints can be mixed directly into Firm & Flexible. Clear to match the color-coat of the vehicle. Seals wet or dry. Can be smoothed to a fine feathered edge, even after it has skinned, by using IES #1700 or #4700 Super Cleaning Solvent.
Prod. No. Size Units/Case
1548 5 fl. oz. tube 12
FIRM & FLEXIBLE SEAM SEALERHigh Technology Joint & Seam Sealer
A fast setting, firm yet flexible automotive seam sealant. Material skins in approx. 1 minute. Can be painted in 20-30 minutes. Sets to a firm yet flexible consistency with tremendous adhesion. Will not peel or crack. Seals wet or dry. Can be smoothed to a fine feathered edge, even after it has skinned, by using IES #1700 or #4700 Super Cleaning Solvent.
1540 Black 10.5 fl. oz. cartridge 121541 Black 5 fl. oz. tube 12
1545 White 10.5 fl. oz. cartridge 121546 White 5 fl. oz. tube 12
Prod. No. Size Units/Case
PO
U IN
TERE
EFERE
CE
- Da
o
oe
nt P
dc
tsR
DC
TC
HA
NG
RN
u
lC
mp
nro
uP
OU
INTER
E EFER
EC
E- D
a
oo
en
t Pd
cts
RD
CT
CH
AN
GR
N
ulC
mp
nro
u
PR
DU
TE
St
Du
rax
ty
SM
Dm
ii
n-
Lo
US
reu
hU
-O
LR
ber
OC
IK
enm
iO
ae
Eo
no
Tranrd
CC
stW
rtP
ub
3MU
SB
d
iS
r
el
Sa
Fso
Sea
Eo
yT
teu
eS
at
ru
rl
S P
ne
o84
W4
48
207
337
RF
NT
17
200
828
MC
alB
nd14
C
518
80
93R
22
01
Ahe
v85
330
18
829
dsi
e60
932
01
8515M
etal an
lBnd
410
84
639
371
891
05
UP
0408
1P
e
o8
2063
175
08
.12
92
15
Ahe
ve56
KT
163
418
19
UP
05d
si8
02
87
09
251
419
85
7M
etalPatch P
ne51
UP
3
al
85
902
Bnd
MS
1o
A
5S
lf ev
ig
41-
142
801
3987
000
442
1C
-L
891
30U
P82
U-
2530
eL
eln8
0F
62
823
31
01
22F
S93
090
E7
085
Sm
e
le39
01
0.014
30ea
Sa
r38
2589
208
7N
n Sa
84
1-
042
68
0139
050
004
5212
FS
8991
40U
P9
72U
-24
30o
g1
F6
22
437
01
13
C-S
30
0E
708
6S
m
ee
4112
80.01
30
30ea
Sal
r8
26
92
88
418
3r
ki1
D-A
18
0093
73
001
6210
03C
-P89
9120
022
Doo
Sn
845
S4
772
83
40
08
25
FA
30
88
des
ve1
010
022
Ah
i50
98
9gi
16C
II03
800
977
4002
12
101
FS
R89
917
U9
220
23R
id
84W
4
62
23
613
082
200
C-
301
P0
86
lsti
Rep
ir80
1*04
997
1010
1020
9002
023
Pa
c a
04
03
31
11
23
208
908
7in.
0599
71
03
17(5 m
)4
03
450
8910
8.
1291
09
ii
l
stc8
0861
04U
P1
034
Rg
dP
ai
410
34
091
282
eai
(40se
K13
905
U90
20
35R
pr
c.)
T13
40
P1
82l
ie
Pa
c8
17C
03
8201
9940
81
5*05
200
FF
9310
608
32F
exbl
l
sti4
WI
40
03
270
101
0C
-X
89
12
ei (
n
)01
*03
17C
062
108
0903
0833
Rpa
r5
mi
.8
04
140
10
90
28
3116
90
leib
eP
aic
89
4008
30F
xl
l
st40
402
ei (
0 se)
5008
31R
par
4c.
402
leib
eF
am8
1W
-20
335
4121
C-F
P91
208
62F
xl
o
45U
S43
97
761
FU
24
849
430
24P
9108
634
31
U32
44
503
Ri
dF
am84
5W
399
P1
E-72
087
gi
o5
U-R
97
U9
42U
345
88
045
Cl
re
eral84
0P
101
398
082
6ea
Gn
356
97
140
1P
rpo
dhsi
e84
0B
-1
827
use
Ae
v6
C1
140
1S
d
hnn
84P
055
9301
0086
1i
eC
ael
401
98
39
04
Gl
ss d
esive84
P6
51a
Ah
178
Esy-S
nd8
8014
/43
aa
0*
21
Fex
ble/e
-Fl
x4
UP
06l
iS
mi
e8
099
2D
al i
pee G
n9
12U
P00
uD
sns
u62
92
*Se
e Tuqu
ezbe
33 Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Body SealersBody Sealerswww.internationalepoxies.comwww.internationalepoxies.com
44
INTER-MIX™ 5 SEAM SEALER / ADHESIVESets in approx. 5 minutes*
A non-sagging, firm, semi-flexible adhesive/sealant used for sealing vertical and horizontal seams and joints on automobiles and trucks. Can be used to reinforce and eliminate flutter and vibration of body panel cross members.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8412 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
INTER-MIX™ 15 SEAM SEALER / ADHESIVESets in approx. 15 minutes*
A non-sagging, firm, semi-flexible adhesive/sealant used for sealing vertical and horizontal seams and joints on automobiles and trucks. Can be used to reinforce and eliminate flutter and vibration of body panel cross members.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8411 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
INTER-MIX™ 30 FLOWABLE SEAM SEALERSets in approx. 30 minutes*
A self leveling seam sealer designed for sealing roof seams and drip rails on Ford F-Series Pick Ups, Vans, SUV’s and various other horizontal applications.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8410 10 fl. oz. kit (300mL) 4
(w/ 2 static mixers and one 1/2”and one 1” Ribbon Zip-Tip)
INTER-MIX™ 15 SEAM SEALER / ADHESIVEFLEXIBLESets in approx. 15 minutes*
A non-sagging, extremely flexible adhesive/sealant used for sealing vertical and horizontal seams and joints on automobiles and trucks. Can be used to reinforce and eliminate flutter and vibration of body panel cross members. Excellent for pickup beds and around hinges.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8413 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
Prod. No. Size Units/Case
1512 10.5 fl. oz. cartridge 12
INTER-SEAL™ (WHITE)High Technology Joint & Seam Sealer
A permanent, flexible, all purpose automotive sealant for autobody drip rails, seams, cracks and joints. Can be smoothed to a fine feathered edge, even after it has skinned, by using IES #1700 or #4700 Super Cleaning Solvent.
Seals wet or dry.Fast skinning, can be painted after skin is formed.
BRUSHABLE SEAM SEALER WHITE
A fast setting, permanent flexible sealant. Used for sealing vertical and horizontal seams and joints on automotive and truck floor pans, trunks. firewalls, lab seams, etc.
Matches OEM brushed in sealers. Can be painted over in 20-30 minutes. Excellent adhesion to painted, bare or primed metal. Seals wet or dry.
Prod. No. Size Units/Case
1511 32 fl. oz. can 4
FIRM & FLEXIBLE CLEAR
Firm & Flexible Clear Automotive Seam Sealer is a fast setting, firm yet flexible clear sealant with excellent adhesion to most surfaces.
Can be painted over within 30 minutes. Will not crack or peel and stays clear. Most automotive paints can be mixed directly into Firm & Flexible. Clear to match the color-coat of the vehicle. Seals wet or dry. Can be smoothed to a fine feathered edge, even after it has skinned, by using IES #1700 or #4700 Super Cleaning Solvent.
Prod. No. Size Units/Case
1548 5 fl. oz. tube 12
FIRM & FLEXIBLE SEAM SEALERHigh Technology Joint & Seam Sealer
A fast setting, firm yet flexible automotive seam sealant. Material skins in approx. 1 minute. Can be painted in 20-30 minutes. Sets to a firm yet flexible consistency with tremendous adhesion. Will not peel or crack. Seals wet or dry. Can be smoothed to a fine feathered edge, even after it has skinned, by using IES #1700 or #4700 Super Cleaning Solvent.
1540 Black 10.5 fl. oz. cartridge 121541 Black 5 fl. oz. tube 12
1545 White 10.5 fl. oz. cartridge 121546 White 5 fl. oz. tube 12
Prod. No. Size Units/Case
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Body SealersBody Sealers www.internationalepoxies.comwww.internationalepoxies.com
55
STRIP PUTTY Black 3/16" Bead
A thumbable, easily tooled caulk. Seals cracks, seams, joints, housings etc.
Will not dry out. Remains flexible. Seals out moisture, air and dust. Paintable immediately. Super feathered edge.
Prod. No. Size Units/Case
1508 2 lb. box 4
SALAMI-PACK URETHANE SEALANT/ADHESIVE (Gray)
Use on: Automotive seams and joints that need a strong bond and have a lot of mechanical stress, shock, vibration and sudden impact. Bonds: Steel, aluminum, SMC, FRP, galvanized, ABS, fiberglass, most rigid plastics, wood and glass. Do not use for windshields or backglass installation. Each case contains 6 replacement tips. May be brushed for OE look.
Prod. No. Size Units/Case
1570 10.3 fl. oz. foil pouch 61571 Replacement Tips 6
INTEGRA-GRAY URETHANE SEALANT/ADHESIVE
A one component gray polyurethane sealant formulated for a wide variety of bonding and sealing applications for the automotive industry. Do not use for windshield or backglass installations.
Tack free time: 15-25 minutes. Paintable in 15 minutes.Gray color provides contrast on new black body partsto ensure seam is sealed. May be brushed for OE look.
™
Prod. No. Size Units/Case
1565 10.5 fl. oz. cartridge 12
INTEGRA-360 BLACKURETHANE ADHESIVE & SEALANT
A one-component polyurethane sealant formulated for a wide variety of bonding and sealing applications for the automotive industry. Do not use for windshield or backglass installations.
Tremendous strength and adhesion. Tack free time in 15-25 minutes. Paintable in 15 minutes. Adheres to: steel, aluminum, fiberglass, SMC, most plastics, wood & concrete. Non-corrosive to metallic substrates. Ideal for Uni-body type vehicles. May be brushed for OE look.
Prod. No. Size Units/Case
1560 10.5 fl. oz. cartridge 12
SOUND DEADENER PADS
Used to replace factory installed pan insulators damaged in collisions. Reduces road noise. Use on floor pans, trunks and door skins. Self sticking and paintable. Can be heated to 300°F to conform to irregular surfaces.
Prod. No. Size Units/Case
1581 12” x 12” x 1/16” thick 10
SOUND DEADENER PADSElastomeric Type, Self-Adhering Gray
Also used to replace factory installed pan insulators and general sound deadening applications. Easily conforms to irregular surfaces without heating. Easily cuts to shape. Can be painted with flexible paint.
Prod. No. Size Units/Case
1585 10” x 20” x 3/32” thick 10
SPRAY LEAK SEALER (Black)
Formulated to be sprayed through an extension tube to reach hard to get areas. Seals firewalls, cowl seams, plenum seams, wheel housings, etc. Comes with a 12" extension tube.
Prod. No. Size Units/Case
4590 24 fl.oz. aerosol 12
4591 12” ext. tube/button 6
4558 36” ext. tube/button 6
RUBBER BASESPRAYABLE SEAM SEALER
A permanently flexible rubber base sprayable seam sealer formulated to duplicate automotive OEM coarse textured and beaded seams. Paintable when cured and has excellent adhesion to metal, galvanized steel, rigid plastics, fiberglass and aluminum. Contains no silicone.
Applied with #1575 air operated spray applicator gun.
Prod. No. Size Units/Case
1587 BEIGE 10.5 fl. oz. cart. 12
1588 GREY 10.5 fl. oz. cart. 12
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Body SealersBody Sealerswww.internationalepoxies.comwww.internationalepoxies.com
66
INTER-SEAL URETHANE SEAMTAPE
INTER-SEAL Urethane Seamtape is a flexible self-adhesive sealing material, designed to cover large-gap body seams. Designed to replace OEM sealing tape used by General Motors, Ford, Chrysler and various other late model passenger cars, vans and light duty trucks. Common applications; OEM trunk lip seams, door edge, post and frame seams, rocker panel seams and tailgate frame seams.
Clear in color. Easily conforms to irregular surfaces.Easily cut to different shapes and sizes. Flexible at low temperatures. Paintable immediately. Excellent resistance to weather, sunlight, salt spray, solvents and chemicals. INTER-SEAL tape is 3/64” thick.
Clear!
Prod. No. Size Units/Case
70704 3/8” wide x 30 ft roll 4
70705 7/8” wide x 30 ft roll 4
70706 6” x 9” sheet (8/pack) 4 packs
Panel Bonding AdhesivesPanel Bonding Adhesives
INTER-WELD™ 60 MSAMethacrylate Structural Adhesive
INTER-WELD 60 MSA is a 1:1 methacrylate structural adhesive that features an extended open time for bonding large components or for prolonged assembly operations. INTER-WELD 60 MSA offers outstanding adhesion to a wide variety of materials, including metal, fiberglass, composites, vinyl esters, gelcoats and thermoplastics. INTER-WELD 60 MSA exhibits high strength and superior toughness over a wide temperature range, including sub-zero temperatures. The formulation has specials materials to curtail odor after application and during long open time. This product has a unique benefit to end-users concerned with read-through, it has a low exotherm in large masses to prevent sensitive parts from seeing distortion. Contains glass beads to prevent adhesive squeeze-out. Tremendous impact resistance.
Working Time: approx. 60 minutes.Handling Time: approx. 1-1/2 to 2-1/2 hours.Full Cure Time: a p p r o x . 2 4 h o u r s .
Dispenses with any IES 300mL cartridge applicator gun.
For optimum performance on aluminum substrates,use IES #1840 RUST-RAIDER Surface Prep.
Prod. No. Size Units/Case
8560 10 fl. oz. kit (300mL) 4(w/ 2 static mixers and one 1/2”
and one 1” Ribbon Zip-Tip)
INTER-WELD™ 15 MSAMethacrylate Structural Adhesive
INTER-WELD 15 MSA is a 1:1 methacrylate structural adhesive formulated to bond engineered thermoplastics, thermosets, composites and metal structural elements together in any combination. INTER-WELD 15 MSA forms tough, high strength, high impact resistant bonds. It features a medium cure time for flexibility in positioning and multiple operations, but provides for faster fixturing. INTER-WELD 15 MSA has outstanding durability and environmental resistance to most common industrial cleaners, fuels, lubricants and environmental conditions. This product is formulated as a non-sag, creamy gel to dispense through static mixer tubes and bulk dispensing equipment. Contains glass beads to prevent adhesive squeeze-out. Tremendous impact resistance.
Working Time: approx. 10-15 minutes.Handling Time: approx. 25-30 minutes.Full Cure Time: approx. 24 hours.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8515 10 fl. oz. kit (300mL) 4(w/ 2 static mixers and one 1/2”
and one 1” Ribbon Zip-Tip)
NU SEAM SEALANT TAPE
IES™ introduces a new line of Seam Sealant Tapes that provides an innovative solution to the problem of applying sealants. NU-SEAM™ Sealant Tape quickly duplicates the factory appearance, is immediately paintable, and has excellent adhesion.
Prod. No. Size Units/Case
70720 5/16” (6mm) x 19.6 ft 4
70721 3/8” (10mm) x 19.6 ft 4
70730 NU-SEAM Kit 1Kit contains: 1-70720, 1-70721, 1-4700 (IES™ Super Clean),1-4186 (IES™ Self-Etching Primer), 1-70725 (Roller Tool).
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Body SealersBody Sealers www.internationalepoxies.comwww.internationalepoxies.com
55
STRIP PUTTY Black 3/16" Bead
A thumbable, easily tooled caulk. Seals cracks, seams, joints, housings etc.
Will not dry out. Remains flexible. Seals out moisture, air and dust. Paintable immediately. Super feathered edge.
Prod. No. Size Units/Case
1508 2 lb. box 4
SALAMI-PACK URETHANE SEALANT/ADHESIVE (Gray)
Use on: Automotive seams and joints that need a strong bond and have a lot of mechanical stress, shock, vibration and sudden impact. Bonds: Steel, aluminum, SMC, FRP, galvanized, ABS, fiberglass, most rigid plastics, wood and glass. Do not use for windshields or backglass installation. Each case contains 6 replacement tips. May be brushed for OE look.
Prod. No. Size Units/Case
1570 10.3 fl. oz. foil pouch 61571 Replacement Tips 6
INTEGRA-GRAY URETHANE SEALANT/ADHESIVE
A one component gray polyurethane sealant formulated for a wide variety of bonding and sealing applications for the automotive industry. Do not use for windshield or backglass installations.
Tack free time: 15-25 minutes. Paintable in 15 minutes.Gray color provides contrast on new black body partsto ensure seam is sealed. May be brushed for OE look.
™
Prod. No. Size Units/Case
1565 10.5 fl. oz. cartridge 12
INTEGRA-360 BLACKURETHANE ADHESIVE & SEALANT
A one-component polyurethane sealant formulated for a wide variety of bonding and sealing applications for the automotive industry. Do not use for windshield or backglass installations.
Tremendous strength and adhesion. Tack free time in 15-25 minutes. Paintable in 15 minutes. Adheres to: steel, aluminum, fiberglass, SMC, most plastics, wood & concrete. Non-corrosive to metallic substrates. Ideal for Uni-body type vehicles. May be brushed for OE look.
Prod. No. Size Units/Case
1560 10.5 fl. oz. cartridge 12
SOUND DEADENER PADS
Used to replace factory installed pan insulators damaged in collisions. Reduces road noise. Use on floor pans, trunks and door skins. Self sticking and paintable. Can be heated to 300°F to conform to irregular surfaces.
Prod. No. Size Units/Case
1581 12” x 12” x 1/16” thick 10
SOUND DEADENER PADSElastomeric Type, Self-Adhering Gray
Also used to replace factory installed pan insulators and general sound deadening applications. Easily conforms to irregular surfaces without heating. Easily cuts to shape. Can be painted with flexible paint.
Prod. No. Size Units/Case
1585 10” x 20” x 3/32” thick 10
SPRAY LEAK SEALER (Black)
Formulated to be sprayed through an extension tube to reach hard to get areas. Seals firewalls, cowl seams, plenum seams, wheel housings, etc. Comes with a 12" extension tube.
Prod. No. Size Units/Case
4590 24 fl.oz. aerosol 12
4591 12” ext. tube/button 6
4558 36” ext. tube/button 6
RUBBER BASESPRAYABLE SEAM SEALER
A permanently flexible rubber base sprayable seam sealer formulated to duplicate automotive OEM coarse textured and beaded seams. Paintable when cured and has excellent adhesion to metal, galvanized steel, rigid plastics, fiberglass and aluminum. Contains no silicone.
Applied with #1575 air operated spray applicator gun.
Prod. No. Size Units/Case
1587 BEIGE 10.5 fl. oz. cart. 12
1588 GREY 10.5 fl. oz. cart. 12
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Body SealersBody Sealerswww.internationalepoxies.comwww.internationalepoxies.com
66
INTER-SEAL URETHANE SEAMTAPE
INTER-SEAL Urethane Seamtape is a flexible self-adhesive sealing material, designed to cover large-gap body seams. Designed to replace OEM sealing tape used by General Motors, Ford, Chrysler and various other late model passenger cars, vans and light duty trucks. Common applications; OEM trunk lip seams, door edge, post and frame seams, rocker panel seams and tailgate frame seams.
Clear in color. Easily conforms to irregular surfaces.Easily cut to different shapes and sizes. Flexible at low temperatures. Paintable immediately. Excellent resistance to weather, sunlight, salt spray, solvents and chemicals. INTER-SEAL tape is 3/64” thick.
Clear!
Prod. No. Size Units/Case
70704 3/8” wide x 30 ft roll 4
70705 7/8” wide x 30 ft roll 4
70706 6” x 9” sheet (8/pack) 4 packs
Panel Bonding AdhesivesPanel Bonding Adhesives
INTER-WELD™ 60 MSAMethacrylate Structural Adhesive
INTER-WELD 60 MSA is a 1:1 methacrylate structural adhesive that features an extended open time for bonding large components or for prolonged assembly operations. INTER-WELD 60 MSA offers outstanding adhesion to a wide variety of materials, including metal, fiberglass, composites, vinyl esters, gelcoats and thermoplastics. INTER-WELD 60 MSA exhibits high strength and superior toughness over a wide temperature range, including sub-zero temperatures. The formulation has specials materials to curtail odor after application and during long open time. This product has a unique benefit to end-users concerned with read-through, it has a low exotherm in large masses to prevent sensitive parts from seeing distortion. Contains glass beads to prevent adhesive squeeze-out. Tremendous impact resistance.
Working Time: approx. 60 minutes.Handling Time: approx. 1-1/2 to 2-1/2 hours.Full Cure Time: a p p r o x . 2 4 h o u r s .
Dispenses with any IES 300mL cartridge applicator gun.
For optimum performance on aluminum substrates,use IES #1840 RUST-RAIDER Surface Prep.
Prod. No. Size Units/Case
8560 10 fl. oz. kit (300mL) 4(w/ 2 static mixers and one 1/2”
and one 1” Ribbon Zip-Tip)
INTER-WELD™ 15 MSAMethacrylate Structural Adhesive
INTER-WELD 15 MSA is a 1:1 methacrylate structural adhesive formulated to bond engineered thermoplastics, thermosets, composites and metal structural elements together in any combination. INTER-WELD 15 MSA forms tough, high strength, high impact resistant bonds. It features a medium cure time for flexibility in positioning and multiple operations, but provides for faster fixturing. INTER-WELD 15 MSA has outstanding durability and environmental resistance to most common industrial cleaners, fuels, lubricants and environmental conditions. This product is formulated as a non-sag, creamy gel to dispense through static mixer tubes and bulk dispensing equipment. Contains glass beads to prevent adhesive squeeze-out. Tremendous impact resistance.
Working Time: approx. 10-15 minutes.Handling Time: approx. 25-30 minutes.Full Cure Time: approx. 24 hours.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8515 10 fl. oz. kit (300mL) 4(w/ 2 static mixers and one 1/2”
and one 1” Ribbon Zip-Tip)
NU SEAM SEALANT TAPE
IES™ introduces a new line of Seam Sealant Tapes that provides an innovative solution to the problem of applying sealants. NU-SEAM™ Sealant Tape quickly duplicates the factory appearance, is immediately paintable, and has excellent adhesion.
Prod. No. Size Units/Case
70720 5/16” (6mm) x 19.6 ft 4
70721 3/8” (10mm) x 19.6 ft 4
70730 NU-SEAM Kit 1Kit contains: 1-70720, 1-70721, 1-4700 (IES™ Super Clean),1-4186 (IES™ Self-Etching Primer), 1-70725 (Roller Tool).
Panel Bonding AdhesivesPanel Bonding Adhesives www.internationalepoxies.comwww.internationalepoxies.com
RUST-RAIDER™ Surface Prep
RUST-RAIDER™ etches steel & aluminum to improve adhesion of adhesives. It is the ideal item for you to use when you want to ready a rusted surface for painting! Conveniently packaged in a 32 oz. bottle with a heavy-duty spray head, RUST-RAIDER™ is a snap to use! Fast acting and easy to apply. Professional strength. Extends life of coatings. Neutralizes rust, Prevents further corrosion. Converts rust to a phosphate polymer coating.
Prod. No. Size Units/Case
1840 32 oz. bottle 6(w/ spray applicator)
77
INTER-MIX™ 45 DOOR SKIN ADHESIVESets in 40 to 60 minutes*
A high strength structural adhesive designed for bonding and sealing flanged type door skins. Specially formulated to provide the proper degree of flexibility that is necessary to withstand the repeated shock caused by slamming doors.
Dispenses with any IES 300mL cartridge applicator gun.
NOTE: Not for Camaro or Firebird late model door skins!
NOTE: Not for Camaro or Firebird late model door skins!
Prod. No. Size Units/Case
8415 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
Prod. No. Size Units/Case
8414 10 fl. oz. kit (300mL) 4(w/ 2 static mixers and one 1/2”
and one 1” Ribbon Zip-Tip)
INTER-MIX™ 60 SMC Panel Bonding Adhesive
Work Time: 50 to 60 min. @ 75° FHandling Strength: 4 to 6 hours Approx.Full Cure Strength: 24 Hours
A non-sag, high strength, two part epoxy based adhesive that provides tough, durable bonds to sheet moulding compound (SMC) panels, metal space frames, fiberglass and composites. SMC Panel Bonding Adhesive is ideal for splicing as well as complete panel replacement. Contains glass beads to prevent adhesive squeeze-out.
For optimum performance on aluminum substrates, use IES #1840 RUST-RAIDER Surface Prep
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8420 10 fl. oz. kit (300mL) 4(w/ 2 static mixers and one 1/2”
and one 1” Ribbon Zip-Tip)
INTER-MIX™ 60 Metal Panel Bonding Adhesive
Work Time: 50 to 60 min. @ 75° FHandling Strength: 4 to 6 hours Approx.Full Cure Strength: 24 Hours
A heavy-bodied, high strength two part epoxy adhesive that will bond to; Cold Rolled Steel, Galvanized Steel and Aluminum. When used according to specific directions, IES Metal Panel Bonding Adhesive may be used in the replacement of: Quarter Panels, Door Skins, Roof Panels, Truck Box Sides and other Outer Body Sheet Metal. Contains glass beads to prevent adhesive squeeze-out.
For optimum performance on aluminum substrates, use IES #1840 RUST-RAIDER Surface Prep.
Dispenses with any IES 300mL cartridge applicator gun.
Expandable FoamsExpandable Foams
INTER-FOAM™ 5sec FLEXIBLE FOAM
A two part flexible urethane foam formulated to expandup to 10 times its original volume. Used to stop wind noise and water leaks in pillar posts. Adds reinforcement to panels. Stops panel flutter. Provides sound deadening.
Expands in 5 to 10 seconds. Handling Strength in 2 to 3 minutes. Duplicates OEM Foams. Paintable. Excellent Memory - Compresses Up to 55% of it's expanded size.
Dispenses with #96211 or #96212 gun.
Prod. No. Size Units/Case
8451 10 fl. oz. kit (300mL) 4
(#8451 comes w/ 2 static mixers. #8449 comes w/ 1 static mixer and 1 hand dispenser)
8449 50 mL kit 6
INTER-FOAM™ 10sec RIGID FOAM
A two part expandable rigid urethane foam formulated to fill and reinforce pillar posts and box sections. Expands up to 10 times its original volume. Also stops wind, water and dust leaks. Eliminates panel flutter on cross members and provides sound deadening and compressive strength.
Expands in 10 to 25 seconds. Tack free in 3 to 4 minutes. Cures in less than 1 hour. Compressive Strength 170 PSI. Density: 5.5 to 6.5 lbs. per cubic foot. Paintable and sets up hard.
Dispenses with #96211 or #96212 gun.
Prod. No. Size Units/Case
8455 10 fl. oz. kit (300mL) 4(w/ 2 static mixers)
Plastic RepairPlastic Repair
88
Prod. No. Size Units/Case
8010 10 fl. oz. tube kit 4
8011 22 fl. oz. cartridge kit 4
8013 32 fl. oz. (can) kit 4
8015 2 gallon (can) kit 1
EPOXYFLEX (FLEXIBLE SET)Sets in approx. 5 minutes*
A superb flexible two-part epoxy adhesive, filler and resurfacer. Formulated for repairing urethane bumpers, filler panels, valances, flexible vinyl or plastic parts. May be used to reinforce major tears and cuts. As a resurfacer it has excellent feathering characteristics. Adheres to glass and metal and is an excellent door glass channel adhesive. EPOXYFLEX sets up in approximately 5 minutes and achieves handling strength in 10 to 20 minutes.
HI-STRESS EPOXY (RIGID SET)Sets in approx. 5 minutes*
A superb rigid two-part epoxy adhesive, filler and resurfacer. Adheres to metal, aluminum, fiberglass, most plastics, urethane, SMC, glass, wood and concrete. Resistant to gasoline, acid and solvents. Handling strength in 10 to 20 minutes. Sandable in 20 minutes.
Prod. No. Size Units/Case
8001 10 fl. oz. tube kit 4
8002 22 fl. oz. cartridge kit 4
8004 32 fl. oz. (can) kit 4
8006 2 gallon (can) kit 1
INTER-MIX™ 5 HI-STRESS EPOXY (RIGID)Sets in approx. 5 minutes*
A superb rigid adhesive, filler and resurfacer. Adheres to metal, aluminum, fiberglass, most plastics, urethane, SMC, glass, wood and concrete. Resistant to gasoline, acid and solvents. Handling strength in 10 to 20 minutes. Sandable in 20 minutes. Our automatic mixing system eliminates errors which are common in manual mixing.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8416 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
INTER-MIX™ 5 EPOXYFLEX (FLEXIBLE)Sets in approx. 5 minutes*
A superb flexible adhesive, filler and resurfacer. Formulated for repairing urethane bumpers, filler panels, valances, flexible vinyl or plastic parts. May be used to reinforce major tears and cuts. As a resurfacer it has excellent feathering characteristics. Adheres to glass and metal and is an excellent door glass channel adhesive. EPOXYFLEX sets up in approximately 5 minutes and achieves handling strength in 10 to 20 minutes. Our automatic mixing system eliminates errors which are common in manual mixing.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8417 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
INTER-MIX™ 40sec RSRRIGID/SEMI-RIGID(General Purpose)Sets in approx. 40 seconds*
A extra fast set, two-part epoxy adhesive filler and surfacer. Designed for bonding rigid/semi-rigid substrates such as: polyurethane and other automotive plastic parts. Handling strength in 5-10 minutes.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8408 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
INTER-MIX™ 40sec FSF BLACKFLEXIBLE/SEMI-FLEXIBLE(General Purpose)Sets in approx. 40 seconds*
A extra fast set, two-part epoxy adhesive filler and surfacer. Designed for bonding flexible/semi-flexible substrates such as: polyurethane and other automotive plastic parts. Handling strength in 5-10 minutes.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8409 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
EASY-SAND (RIGID/FLEXIBLE)Filler / Surfacer Repair CompoundSets in approx. 5 minutes*
An easy sanding two-part epoxy adhesive, filler and surfacer designed for repairing most plastics, SMC, fiberglass and other materials. Use over top of IES™ repair compounds to fill sander marks, low spots and other imperfections (skim coat). Quick dry, superior
Prod. No. Size Units/Case
8080 10 oz. tube kit 4
QUICKIE-FIX 4040 Second Repair Adhesive / CompoundSets in approx. 40 seconds*
A fast set epoxy repair compound used for bonding, filling and finishing. Used on plastics, FRP, SMC, fiberglass and metal parts. Excellent bonding and sanding characteristics. Accepts automotive primers and paints.
Dispenses with #96204 gun.
Prod. No. Size Units/Case
8440 50 mL kit 6(w/ 2 #8249 static mixers)
Panel Bonding AdhesivesPanel Bonding Adhesives www.internationalepoxies.comwww.internationalepoxies.com
RUST-RAIDER™ Surface Prep
RUST-RAIDER™ etches steel & aluminum to improve adhesion of adhesives. It is the ideal item for you to use when you want to ready a rusted surface for painting! Conveniently packaged in a 32 oz. bottle with a heavy-duty spray head, RUST-RAIDER™ is a snap to use! Fast acting and easy to apply. Professional strength. Extends life of coatings. Neutralizes rust, Prevents further corrosion. Converts rust to a phosphate polymer coating.
Prod. No. Size Units/Case
1840 32 oz. bottle 6(w/ spray applicator)
77
INTER-MIX™ 45 DOOR SKIN ADHESIVESets in 40 to 60 minutes*
A high strength structural adhesive designed for bonding and sealing flanged type door skins. Specially formulated to provide the proper degree of flexibility that is necessary to withstand the repeated shock caused by slamming doors.
Dispenses with any IES 300mL cartridge applicator gun.
NOTE: Not for Camaro or Firebird late model door skins!
NOTE: Not for Camaro or Firebird late model door skins!
Prod. No. Size Units/Case
8415 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
Prod. No. Size Units/Case
8414 10 fl. oz. kit (300mL) 4(w/ 2 static mixers and one 1/2”
and one 1” Ribbon Zip-Tip)
INTER-MIX™ 60 SMC Panel Bonding Adhesive
Work Time: 50 to 60 min. @ 75° FHandling Strength: 4 to 6 hours Approx.Full Cure Strength: 24 Hours
A non-sag, high strength, two part epoxy based adhesive that provides tough, durable bonds to sheet moulding compound (SMC) panels, metal space frames, fiberglass and composites. SMC Panel Bonding Adhesive is ideal for splicing as well as complete panel replacement. Contains glass beads to prevent adhesive squeeze-out.
For optimum performance on aluminum substrates, use IES #1840 RUST-RAIDER Surface Prep
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8420 10 fl. oz. kit (300mL) 4(w/ 2 static mixers and one 1/2”
and one 1” Ribbon Zip-Tip)
INTER-MIX™ 60 Metal Panel Bonding Adhesive
Work Time: 50 to 60 min. @ 75° FHandling Strength: 4 to 6 hours Approx.Full Cure Strength: 24 Hours
A heavy-bodied, high strength two part epoxy adhesive that will bond to; Cold Rolled Steel, Galvanized Steel and Aluminum. When used according to specific directions, IES Metal Panel Bonding Adhesive may be used in the replacement of: Quarter Panels, Door Skins, Roof Panels, Truck Box Sides and other Outer Body Sheet Metal. Contains glass beads to prevent adhesive squeeze-out.
For optimum performance on aluminum substrates, use IES #1840 RUST-RAIDER Surface Prep.
Dispenses with any IES 300mL cartridge applicator gun.
Expandable FoamsExpandable Foams
INTER-FOAM™ 5sec FLEXIBLE FOAM
A two part flexible urethane foam formulated to expandup to 10 times its original volume. Used to stop wind noise and water leaks in pillar posts. Adds reinforcement to panels. Stops panel flutter. Provides sound deadening.
Expands in 5 to 10 seconds. Handling Strength in 2 to 3 minutes. Duplicates OEM Foams. Paintable. Excellent Memory - Compresses Up to 55% of it's expanded size.
Dispenses with #96211 or #96212 gun.
Prod. No. Size Units/Case
8451 10 fl. oz. kit (300mL) 4
(#8451 comes w/ 2 static mixers. #8449 comes w/ 1 static mixer and 1 hand dispenser)
8449 50 mL kit 6
INTER-FOAM™ 10sec RIGID FOAM
A two part expandable rigid urethane foam formulated to fill and reinforce pillar posts and box sections. Expands up to 10 times its original volume. Also stops wind, water and dust leaks. Eliminates panel flutter on cross members and provides sound deadening and compressive strength.
Expands in 10 to 25 seconds. Tack free in 3 to 4 minutes. Cures in less than 1 hour. Compressive Strength 170 PSI. Density: 5.5 to 6.5 lbs. per cubic foot. Paintable and sets up hard.
Dispenses with #96211 or #96212 gun.
Prod. No. Size Units/Case
8455 10 fl. oz. kit (300mL) 4(w/ 2 static mixers)
Plastic RepairPlastic Repair
88
Prod. No. Size Units/Case
8010 10 fl. oz. tube kit 4
8011 22 fl. oz. cartridge kit 4
8013 32 fl. oz. (can) kit 4
8015 2 gallon (can) kit 1
EPOXYFLEX (FLEXIBLE SET)Sets in approx. 5 minutes*
A superb flexible two-part epoxy adhesive, filler and resurfacer. Formulated for repairing urethane bumpers, filler panels, valances, flexible vinyl or plastic parts. May be used to reinforce major tears and cuts. As a resurfacer it has excellent feathering characteristics. Adheres to glass and metal and is an excellent door glass channel adhesive. EPOXYFLEX sets up in approximately 5 minutes and achieves handling strength in 10 to 20 minutes.
HI-STRESS EPOXY (RIGID SET)Sets in approx. 5 minutes*
A superb rigid two-part epoxy adhesive, filler and resurfacer. Adheres to metal, aluminum, fiberglass, most plastics, urethane, SMC, glass, wood and concrete. Resistant to gasoline, acid and solvents. Handling strength in 10 to 20 minutes. Sandable in 20 minutes.
Prod. No. Size Units/Case
8001 10 fl. oz. tube kit 4
8002 22 fl. oz. cartridge kit 4
8004 32 fl. oz. (can) kit 4
8006 2 gallon (can) kit 1
INTER-MIX™ 5 HI-STRESS EPOXY (RIGID)Sets in approx. 5 minutes*
A superb rigid adhesive, filler and resurfacer. Adheres to metal, aluminum, fiberglass, most plastics, urethane, SMC, glass, wood and concrete. Resistant to gasoline, acid and solvents. Handling strength in 10 to 20 minutes. Sandable in 20 minutes. Our automatic mixing system eliminates errors which are common in manual mixing.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8416 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
INTER-MIX™ 5 EPOXYFLEX (FLEXIBLE)Sets in approx. 5 minutes*
A superb flexible adhesive, filler and resurfacer. Formulated for repairing urethane bumpers, filler panels, valances, flexible vinyl or plastic parts. May be used to reinforce major tears and cuts. As a resurfacer it has excellent feathering characteristics. Adheres to glass and metal and is an excellent door glass channel adhesive. EPOXYFLEX sets up in approximately 5 minutes and achieves handling strength in 10 to 20 minutes. Our automatic mixing system eliminates errors which are common in manual mixing.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8417 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
INTER-MIX™ 40sec RSRRIGID/SEMI-RIGID(General Purpose)Sets in approx. 40 seconds*
A extra fast set, two-part epoxy adhesive filler and surfacer. Designed for bonding rigid/semi-rigid substrates such as: polyurethane and other automotive plastic parts. Handling strength in 5-10 minutes.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8408 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
INTER-MIX™ 40sec FSF BLACKFLEXIBLE/SEMI-FLEXIBLE(General Purpose)Sets in approx. 40 seconds*
A extra fast set, two-part epoxy adhesive filler and surfacer. Designed for bonding flexible/semi-flexible substrates such as: polyurethane and other automotive plastic parts. Handling strength in 5-10 minutes.
Dispenses with any IES 300mL cartridge applicator gun.
Prod. No. Size Units/Case
8409 10 fl. oz. kit (300mL) 4(w/ 3 static mixers)
EASY-SAND (RIGID/FLEXIBLE)Filler / Surfacer Repair CompoundSets in approx. 5 minutes*
An easy sanding two-part epoxy adhesive, filler and surfacer designed for repairing most plastics, SMC, fiberglass and other materials. Use over top of IES™ repair compounds to fill sander marks, low spots and other imperfections (skim coat). Quick dry, superior
Prod. No. Size Units/Case
8080 10 oz. tube kit 4
QUICKIE-FIX 4040 Second Repair Adhesive / CompoundSets in approx. 40 seconds*
A fast set epoxy repair compound used for bonding, filling and finishing. Used on plastics, FRP, SMC, fiberglass and metal parts. Excellent bonding and sanding characteristics. Accepts automotive primers and paints.
Dispenses with #96204 gun.
Prod. No. Size Units/Case
8440 50 mL kit 6(w/ 2 #8249 static mixers)
ULTRA-FINE TEXTURE COATING BLACK
A fast-drying "ultra-fine" texture coating that has excellent adhesion. Blendable to a variety of both interior and exterior textures. Used on bumpers, step plates, mirrors, side mouldings, impact strips, dash/trim panels, etc. ULTRA-FINE is not UV resistant and must be top coated. Matches OEM finish. Paintable in 30-60 minutes. Free of PVC's and Isocyanates!
Prod. No. Size Units/Case
4522 20 oz. aerosol can 12
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
SUPER CLEANING SOLVENT
A quick, safe, multi-purpose solvent. Excellent for removing silicone wax, adhesives, tar, undercoating, sealers, paint overspray and bugs. Safe on most fully cured paints, fabric, vinyl, glass and most plastics. Non-staining. Film free. Contains no Chlorinated Solvents or CFC'S.
Prod. No. Size Units/Case
4700 24 oz. size can 12
1700 32 fl. oz. can 12
1701 1 gallon can 4
1702 5 gallon pail 1
1703 55 gallon drum 1INTER-BOND ADHESION PROMOTER
A specially designed formula to promote super strong adhesion to all TPO-polyolefin based materials before painting or repairing. Seals in oils and plasticizers that are an integral part of any polyolefin based substrate. Fast tacking. Non isocyanate.
Prod. No. Size Units/Case
4182 16 oz. aerosol can 12
FLEXIBLE PRIMER SURFACER (Gray)
A fast drying, easy sanding, flexible primer formulated for all flexible/rigid plastic autobody parts. Good filing and easy sanding. Dries in 5-10 minutes and can be feathered. High solids content. Compatible with most automotive paint.
Prod. No. Size Units/Case
4185 20 oz. aerosol can 12
Plastic RepairPlastic Repair www.internationalepoxies.comwww.internationalepoxies.com
99
QUICK-WELD #2A high viscosity (thicker), cyanoacrylate adhesive. Used to bond irregular surfaces or when gap filling requirements are needed. Used on grilles, knobs, mouldings, emblems and countless other automotive plastic parts. Cures to a film strength of 5000 PSI.
Prod. No. Size Units/Case
622 1 fl. oz. bottle 4
QUICK-WELD #1A low viscosity, water thin cyanoacrylate adhesive. Used mainly for bonding close fitting parts or where penetration is needed. Used on grilles, knobs, mouldings, emblems and countless other automotive plastic parts. Cures to a film strength of 5000 PSI.
Prod. No. Size Units/Case
612 1 fl. oz. bottle 4
QUICK SET ACTIVATORUsed to activate QUICK-WELD adhesives or other instant adhesives. Can also be used to prime one of the mating surfaces to insure a successful bond. Can also be used to spray over a bonded area for a quick set.
Prod. No. Size Units/Case
650 4 fl. oz. spray pump 2
QUICK-WELD ADHESIVE KITAn excellent cyanoacrylate repair adhesive kit for most plastics, urethane, SMC and fiberglass. Used on grilles, knobs, mouldings, emblems and countless other automotive plastic parts.
Includes: 1 QUICK-WELD #1, 1 QUICK-WELD #2,1 QUICK-SET ACTIVATOR
Prod. No. Size Units/Case
631 6 fl. oz. kit 1
FIBERGLASS BODY REPAIR TAPE
A fiberglass mesh tape with a high-tack adhesive on one side for easy positioning. Used with epoxy repair compounds to give additional strength and support.
Prod. No. Size Units/Case
70528 1-7/8” wide x 150 ft roll 1
70535 6” wide x 75 ft roll 1
PLASTIC REPAIR RELEASE FILM
A release film used in conjunction with IES #70528 Fiberglass Body Repair Tape. For repair of bumper covers, tabs and panel patches. Used with IES Repair Products.
Prod. No. Size Units/Case
70540 4” wide x 30 ft roll 1
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
www.internationalepoxies.comwww.internationalepoxies.com Plastic RepairPlastic Repair
1010
Prod. No. Description Units/Case
6011 R-1 Polyurethane Rod (1/8” x 30 ft.) 1
6012 R-2 Polypropylene Rod (1/8” x 12”) 30
6013 R-3 ABS Rod (1/8” x 12”) 30
6014 R-4 Polyethylene Rod (1/8” x 12”) 30
6016 R-6 Nylon Rod (3/32” x 30 ft.) 1
6017 R-7 Polycarbonate Rod (1/8” x 12”) 15
PLASTIC WELDING RODS
UNIVERSAL PLASTIC WELDING ROD
UNI-FLEX Fiber Ribbon Rod is a thermal plastic adhesive that sticks to most plastics. It also contains carbon and glass fibers to give greater reinforcing strength. Works fantastic on TPO!
Prod. No. Description Units/Case
6018 R-10 UNI-FLEX Fiber Ribbon (1/4” x 12”) 30
A I R L E S S P L A S T I C WELDER KIT
This 80-watt Airless Plastic Welder is ideal for making super-strong repairs on polyurethane, TPO, Xenoy and other automotive plastic body parts. This welding kit features an 80-watt welding iron controlled by a variable integral control switch and comes with an assortment of welding rods. Made in the U.S.A.
Prod. No. Description Units/Case
6080 Plastic Welder Kit 1
Model 6080 Airless Plastic WelderInstructions
ROD APPLICATION CHARTROD APPLICATION CHART
POLYURETHANERODS WELD:
(R-1) Part No. 6011
POLYPROPYLENERODS WELD:
(R-2) Part No. 6012
ABS RODS WELD:(R-3) Part No. 6013
POLYETHYLENERODS WELD:
(R-4) Part No. 6014
NYLONRODS WELD:
(R-6) Part No. 6016
POLYCARBONATERODS WELD:
(R-7) Part No. 6017
UNIWELD RIBBON::(R-10) Part No. 6018
POLYURETHANERODS WELD:
(R-1) Part No. 6011
POLYPROPYLENERODS WELD:
(R-2) Part No. 6012
ABS RODS WELD:(R-3) Part No. 6013
POLYETHYLENERODS WELD:
(R-4) Part No. 6014
NYLONRODS WELD:
(R-6) Part No. 6016
POLYCARBONATERODS WELD:
(R-7) Part No. 6017
UNIWELD RIBBON::(R-10) Part No. 6018
Plastic bumper covers, both foreign and domestic, padded dashes.Plastic bumper covers, both foreign and domestic, padded dashes.
Fan shrouds, fender housings, heater housings, interior panels.Fan shrouds, fender housings, heater housings, interior panels.
Grills, headlight housings, instrument panels, consoles, etc.Grills, headlight housings, instrument panels, consoles, etc.
Overflow tanks, washer bottles, battery cases, etc.Overflow tanks, washer bottles, battery cases, etc.
Both foreign and domestic radiator tanks.Both foreign and domestic radiator tanks.
Various Ford products.Various Ford products.
When regular rods will not stick. Formulated to adhere to and repair most types of plastic.
When regular rods will not stick. Formulated to adhere to and repair most types of plastic.
EASY APPLICATION - 3 STEPS!
STEP 1: Groove Cut or Torn Area.
STEP 2: Insert Rod In Tip.Gently force the rod into the melt tube on welder tip - when you see melted plastic come out around the edge of the welder tip - slowly - begin to move the welder tip in desired direction of weld. Continue to force welding rod into tip as you feel it melt. Be sure to completely fill groove with melted plastic.
NOTE: Be sure to hold flat shoe part of tip flat against material to be welded, so that the tip bridges across the groove.
NOTE: To weld both sides - quick cool weld with water or air - remove aluminum tape - groove and weld other side.
WRONGRIGHT
MIN. 1/2”
To weld ONE side only
STEP 3: Smooth Out Weld.Use flat shoe of tip to smooth out weld to desired contour.
NOTE: To fill cavities in padded dash covers and hard to reach areas, rotate welder so that the flat part of the tip is up. Slowly feed rod through tip as it melts. when cavity is filled, rotate tip and smooth out weld with flat part of tip.
Weld Rod
Melt Tube
Alum. Body Tape
Melt Plastic Rod Into Groove
Welding Rod FlatPart ofTip Up
Use aluminum body repair tape to hold, cut or tear in place of weld.
ALUMINUM FOIL BODY REPAIR TAPE
Ideal for reinforcing parts to be repaired when using epoxy repair compounds. Special "high-tack" adhesive.
Prod. No. Size Units/Case
70525 2” wide x 50 ft roll 1
ULTRA-FINE TEXTURE COATING BLACK
A fast-drying "ultra-fine" texture coating that has excellent adhesion. Blendable to a variety of both interior and exterior textures. Used on bumpers, step plates, mirrors, side mouldings, impact strips, dash/trim panels, etc. ULTRA-FINE is not UV resistant and must be top coated. Matches OEM finish. Paintable in 30-60 minutes. Free of PVC's and Isocyanates!
Prod. No. Size Units/Case
4522 20 oz. aerosol can 12
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
SUPER CLEANING SOLVENT
A quick, safe, multi-purpose solvent. Excellent for removing silicone wax, adhesives, tar, undercoating, sealers, paint overspray and bugs. Safe on most fully cured paints, fabric, vinyl, glass and most plastics. Non-staining. Film free. Contains no Chlorinated Solvents or CFC'S.
Prod. No. Size Units/Case
4700 24 oz. size can 12
1700 32 fl. oz. can 12
1701 1 gallon can 4
1702 5 gallon pail 1
1703 55 gallon drum 1INTER-BOND ADHESION PROMOTER
A specially designed formula to promote super strong adhesion to all TPO-polyolefin based materials before painting or repairing. Seals in oils and plasticizers that are an integral part of any polyolefin based substrate. Fast tacking. Non isocyanate.
Prod. No. Size Units/Case
4182 16 oz. aerosol can 12
FLEXIBLE PRIMER SURFACER (Gray)
A fast drying, easy sanding, flexible primer formulated for all flexible/rigid plastic autobody parts. Good filing and easy sanding. Dries in 5-10 minutes and can be feathered. High solids content. Compatible with most automotive paint.
Prod. No. Size Units/Case
4185 20 oz. aerosol can 12
Plastic RepairPlastic Repair www.internationalepoxies.comwww.internationalepoxies.com
99
QUICK-WELD #2A high viscosity (thicker), cyanoacrylate adhesive. Used to bond irregular surfaces or when gap filling requirements are needed. Used on grilles, knobs, mouldings, emblems and countless other automotive plastic parts. Cures to a film strength of 5000 PSI.
Prod. No. Size Units/Case
622 1 fl. oz. bottle 4
QUICK-WELD #1A low viscosity, water thin cyanoacrylate adhesive. Used mainly for bonding close fitting parts or where penetration is needed. Used on grilles, knobs, mouldings, emblems and countless other automotive plastic parts. Cures to a film strength of 5000 PSI.
Prod. No. Size Units/Case
612 1 fl. oz. bottle 4
QUICK SET ACTIVATORUsed to activate QUICK-WELD adhesives or other instant adhesives. Can also be used to prime one of the mating surfaces to insure a successful bond. Can also be used to spray over a bonded area for a quick set.
Prod. No. Size Units/Case
650 4 fl. oz. spray pump 2
QUICK-WELD ADHESIVE KITAn excellent cyanoacrylate repair adhesive kit for most plastics, urethane, SMC and fiberglass. Used on grilles, knobs, mouldings, emblems and countless other automotive plastic parts.
Includes: 1 QUICK-WELD #1, 1 QUICK-WELD #2,1 QUICK-SET ACTIVATOR
Prod. No. Size Units/Case
631 6 fl. oz. kit 1
FIBERGLASS BODY REPAIR TAPE
A fiberglass mesh tape with a high-tack adhesive on one side for easy positioning. Used with epoxy repair compounds to give additional strength and support.
Prod. No. Size Units/Case
70528 1-7/8” wide x 150 ft roll 1
70535 6” wide x 75 ft roll 1
PLASTIC REPAIR RELEASE FILM
A release film used in conjunction with IES #70528 Fiberglass Body Repair Tape. For repair of bumper covers, tabs and panel patches. Used with IES Repair Products.
Prod. No. Size Units/Case
70540 4” wide x 30 ft roll 1
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
www.internationalepoxies.comwww.internationalepoxies.com Plastic RepairPlastic Repair
1010
Prod. No. Description Units/Case
6011 R-1 Polyurethane Rod (1/8” x 30 ft.) 1
6012 R-2 Polypropylene Rod (1/8” x 12”) 30
6013 R-3 ABS Rod (1/8” x 12”) 30
6014 R-4 Polyethylene Rod (1/8” x 12”) 30
6016 R-6 Nylon Rod (3/32” x 30 ft.) 1
6017 R-7 Polycarbonate Rod (1/8” x 12”) 15
PLASTIC WELDING RODS
UNIVERSAL PLASTIC WELDING ROD
UNI-FLEX Fiber Ribbon Rod is a thermal plastic adhesive that sticks to most plastics. It also contains carbon and glass fibers to give greater reinforcing strength. Works fantastic on TPO!
Prod. No. Description Units/Case
6018 R-10 UNI-FLEX Fiber Ribbon (1/4” x 12”) 30
A I R L E S S P L A S T I C WELDER KIT
This 80-watt Airless Plastic Welder is ideal for making super-strong repairs on polyurethane, TPO, Xenoy and other automotive plastic body parts. This welding kit features an 80-watt welding iron controlled by a variable integral control switch and comes with an assortment of welding rods. Made in the U.S.A.
Prod. No. Description Units/Case
6080 Plastic Welder Kit 1
Model 6080 Airless Plastic WelderInstructions
ROD APPLICATION CHARTROD APPLICATION CHART
POLYURETHANERODS WELD:
(R-1) Part No. 6011
POLYPROPYLENERODS WELD:
(R-2) Part No. 6012
ABS RODS WELD:(R-3) Part No. 6013
POLYETHYLENERODS WELD:
(R-4) Part No. 6014
NYLONRODS WELD:
(R-6) Part No. 6016
POLYCARBONATERODS WELD:
(R-7) Part No. 6017
UNIWELD RIBBON::(R-10) Part No. 6018
POLYURETHANERODS WELD:
(R-1) Part No. 6011
POLYPROPYLENERODS WELD:
(R-2) Part No. 6012
ABS RODS WELD:(R-3) Part No. 6013
POLYETHYLENERODS WELD:
(R-4) Part No. 6014
NYLONRODS WELD:
(R-6) Part No. 6016
POLYCARBONATERODS WELD:
(R-7) Part No. 6017
UNIWELD RIBBON::(R-10) Part No. 6018
Plastic bumper covers, both foreign and domestic, padded dashes.Plastic bumper covers, both foreign and domestic, padded dashes.
Fan shrouds, fender housings, heater housings, interior panels.Fan shrouds, fender housings, heater housings, interior panels.
Grills, headlight housings, instrument panels, consoles, etc.Grills, headlight housings, instrument panels, consoles, etc.
Overflow tanks, washer bottles, battery cases, etc.Overflow tanks, washer bottles, battery cases, etc.
Both foreign and domestic radiator tanks.Both foreign and domestic radiator tanks.
Various Ford products.Various Ford products.
When regular rods will not stick. Formulated to adhere to and repair most types of plastic.
When regular rods will not stick. Formulated to adhere to and repair most types of plastic.
EASY APPLICATION - 3 STEPS!
STEP 1: Groove Cut or Torn Area.
STEP 2: Insert Rod In Tip.Gently force the rod into the melt tube on welder tip - when you see melted plastic come out around the edge of the welder tip - slowly - begin to move the welder tip in desired direction of weld. Continue to force welding rod into tip as you feel it melt. Be sure to completely fill groove with melted plastic.
NOTE: Be sure to hold flat shoe part of tip flat against material to be welded, so that the tip bridges across the groove.
NOTE: To weld both sides - quick cool weld with water or air - remove aluminum tape - groove and weld other side.
WRONGRIGHT
MIN. 1/2”
To weld ONE side only
STEP 3: Smooth Out Weld.Use flat shoe of tip to smooth out weld to desired contour.
NOTE: To fill cavities in padded dash covers and hard to reach areas, rotate welder so that the flat part of the tip is up. Slowly feed rod through tip as it melts. when cavity is filled, rotate tip and smooth out weld with flat part of tip.
Weld Rod
Melt Tube
Alum. Body Tape
Melt Plastic Rod Into Groove
Welding Rod FlatPart ofTip Up
Use aluminum body repair tape to hold, cut or tear in place of weld.
ALUMINUM FOIL BODY REPAIR TAPE
Ideal for reinforcing parts to be repaired when using epoxy repair compounds. Special "high-tack" adhesive.
Prod. No. Size Units/Case
70525 2” wide x 50 ft roll 1
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Plastic RepairPlastic Repair www.internationalepoxies.comwww.internationalepoxies.com
1111 Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
www.internationalepoxies.comwww.internationalepoxies.com Static Mixers/Zip-TipsStatic Mixers/Zip-Tips
Prod. No. Units/Pkg
STATIC MIXER NOZZLES
For use with 5oz. and 10oz. cartridges that require a separate nut.
#8250, #8253 & #8254 are compatible with Zip-Tips.#8252 are oversized and are not compatible with Zip-Tips
#8254 are used with INTER-FOAM products #8451 & #8455
Size
8250 3/8” ID x 18 elements 10
8250-1000 3/8” ID x 18 elements 1000
8253 3/8” ID x 24 elements 10
STATIC MIXER NOZZLERIBBON & HALF ROUND ZIP-TIPS
For use with #8250, #8253 and #8260 nozzles only.
Prod. No. Size Units/Pkg
8261 1/2” Ribbon Zip-Tip 10
8262 1” Ribbon Zip-Tip 10
8266 1/2” Half Round Zip-Tip 10
1” Half Round Zip-Tip 108267To attach Zip-Tip snap or cut off nozzle as shown. Zip-Tips only fit on the #8250 and #8253 static mixer nozzles.
8261 8266
8262 8267
MANUAL DUAL CARTRIDGE GUN
A heavy duty gun designed for use with 10 fl. oz. (300 mL) and 5 fl. oz. (150 mL) INTER-MIX, INTER-FOAM and INTER-WELD products.
Designed for high viscosity products. Provides extra thrust and power. Mechanical advantage 18:1
96211 Mfg. by Cox
96212 Mfg. by Newborn
Prod. No. Description Units/Case
96211 Manual Dual Cart. Gun 1
96212 Manual Dual Cart. Gun 1
EXTRA-THRUSTMANUAL DUAL CARTRIDGE GUN
A heavy duty gun designed for use with 10 fl. oz. (300 mL) and 5 fl. oz. (150 mL) INTER-MIX, INTER-FOAM and INTER-WELD products.
Designed for high viscosity products. Provides extra super thrust and power. Mechanical advantage 26:1
MFG: Newborn
Prod. No. Description Units/Case
96213 Manual Dual Cart. Gun 1
Applicator GunsApplicator Guns
1212
STATIC MIXER NOZZLES
For 50mL Kits. NOT compatible with ZIP-Tips.
Size Units/PkgProd. No.
8245 1/4” ID x 20 elements 10
8249 1/4” ID x 20 elements 10#8245 are used with #8485 Clear Epoxy.#8249 are used with #8449 INTER-FOAM™ & #8440 Quickie-Fix 40
8252 1/2” ID x 18 elements 10
STATIC MIXER NOZZLE
For use with new 2008 screw-on style cartridges.Compatible with Zip-Tips.
Size Units/PkgProd. No.
8260 3/8” ID x 18 elements 10
8260-1000 3/8” ID x 18 elements 1000
AIR DUAL CARTRIDGE GUN
A heavy duty "Air-Dual Component" gun designed for use with 10 fl. oz. (300 mL) and 5 fl. oz. (150 mL) INTER-MIX, INTER-FOAM and INTER-WELD products.
Designed for high viscosity products. Provides extra thrust and power. Nominal thrust 484 lbs. Features: TruAir Regulator - 100 PSI Max, plus a Dump Valve to stop material flow and an adjustment knob to control the flow.
96214 Mfg. by Cox
96215 Mfg. by Newborn
Prod. No. Description Units/Case
96214 Air Dual Cartridge Gun 1
96215 Air Dual Cartridge Gun 1
8254 3/8” ID x 36 elements 10
6080 Airless Plastic Welder
Kit Includes:
612 - Quick-Weld #1Low Viscosity Adhesive For Plastic Parts622 - Quick-Weld #2 A High Viscosity Adhesive For Plastic Parts650 - Quick Set ActivatorFor Activating Quick-Weld Adhesives4182 - Inter-Bond Adhesion PromoterPromotes Adhesion To Plastic4185 - Flexible Primer SurfacerFor Priming And Resurfacing Plastics4522 - Ultra-Fine Texture Coating BlackMatches most OEM Finishes4700 - Super Cleaning SolventFor Surface Preparation Of Plastics8001 - Hi-Stress EpoxyRigid to Semi-Rigid Epoxy Repair Adhesive And Resurfacer8010 - EpoxyflexFlexible to Semi-Flexible Epoxy Repair Adhesive And Surfacer8080 - Easy-SandUsed For Skim Coat8408 - INTER-MIX 40sec RSR - General PurposeRigid to Semi-Rigid Epoxy Repair Adhesive And Resurfacer8409 - INTER-MIX 40sec FSF - General PurposeFlexible to Semi-Flexible Epoxy Repair Adhesive And Surfacer8416 - INTER-MIX 5 Hi-Stress EpoxyRigid to Semi-Rigid Epoxy Repair Adhesive And Resurfacer8417 - INTER-MIX 5 EpoxyflexFlexible to Semi-Flexible Epoxy Repair Adhesive And Surfacer70525 - Fiberglass Repair TapeFor Reinforcing Repairs70528 - Aluminum Foil Body Repair TapeFor Reinforcing Repairs70540 - Plastic Repair Release FilmFor Prepping Repair Adhesive With Fiberglass Tape 96212 - Manual Dual Cartridge GunFor Dispensing Dual Cartridge Products
PLASTIC REPAIR KIT
All the items you need for plastic repair. Product #PRA2 also includes a #6080 Plastic Welder Kit.
Description Units/Case
Plastic Repair Kit 1
Prod. No.
PRA1
PRA2 Repair Kit w/Welder 1
PLASTIC REPAIR KITS
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Plastic RepairPlastic Repair www.internationalepoxies.comwww.internationalepoxies.com
1111 Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
www.internationalepoxies.comwww.internationalepoxies.com Static Mixers/Zip-TipsStatic Mixers/Zip-Tips
Prod. No. Units/Pkg
STATIC MIXER NOZZLES
For use with 5oz. and 10oz. cartridges that require a separate nut.
#8250, #8253 & #8254 are compatible with Zip-Tips.#8252 are oversized and are not compatible with Zip-Tips
#8254 are used with INTER-FOAM products #8451 & #8455
Size
8250 3/8” ID x 18 elements 10
8250-1000 3/8” ID x 18 elements 1000
8253 3/8” ID x 24 elements 10
STATIC MIXER NOZZLERIBBON & HALF ROUND ZIP-TIPS
For use with #8250, #8253 and #8260 nozzles only.
Prod. No. Size Units/Pkg
8261 1/2” Ribbon Zip-Tip 10
8262 1” Ribbon Zip-Tip 10
8266 1/2” Half Round Zip-Tip 10
1” Half Round Zip-Tip 108267To attach Zip-Tip snap or cut off nozzle as shown. Zip-Tips only fit on the #8250 and #8253 static mixer nozzles.
8261 8266
8262 8267
MANUAL DUAL CARTRIDGE GUN
A heavy duty gun designed for use with 10 fl. oz. (300 mL) and 5 fl. oz. (150 mL) INTER-MIX, INTER-FOAM and INTER-WELD products.
Designed for high viscosity products. Provides extra thrust and power. Mechanical advantage 18:1
96211 Mfg. by Cox
96212 Mfg. by Newborn
Prod. No. Description Units/Case
96211 Manual Dual Cart. Gun 1
96212 Manual Dual Cart. Gun 1
EXTRA-THRUSTMANUAL DUAL CARTRIDGE GUN
A heavy duty gun designed for use with 10 fl. oz. (300 mL) and 5 fl. oz. (150 mL) INTER-MIX, INTER-FOAM and INTER-WELD products.
Designed for high viscosity products. Provides extra super thrust and power. Mechanical advantage 26:1
MFG: Newborn
Prod. No. Description Units/Case
96213 Manual Dual Cart. Gun 1
Applicator GunsApplicator Guns
1212
STATIC MIXER NOZZLES
For 50mL Kits. NOT compatible with ZIP-Tips.
Size Units/PkgProd. No.
8245 1/4” ID x 20 elements 10
8249 1/4” ID x 20 elements 10#8245 are used with #8485 Clear Epoxy.#8249 are used with #8449 INTER-FOAM™ & #8440 Quickie-Fix 40
8252 1/2” ID x 18 elements 10
STATIC MIXER NOZZLE
For use with new 2008 screw-on style cartridges.Compatible with Zip-Tips.
Size Units/PkgProd. No.
8260 3/8” ID x 18 elements 10
8260-1000 3/8” ID x 18 elements 1000
AIR DUAL CARTRIDGE GUN
A heavy duty "Air-Dual Component" gun designed for use with 10 fl. oz. (300 mL) and 5 fl. oz. (150 mL) INTER-MIX, INTER-FOAM and INTER-WELD products.
Designed for high viscosity products. Provides extra thrust and power. Nominal thrust 484 lbs. Features: TruAir Regulator - 100 PSI Max, plus a Dump Valve to stop material flow and an adjustment knob to control the flow.
96214 Mfg. by Cox
96215 Mfg. by Newborn
Prod. No. Description Units/Case
96214 Air Dual Cartridge Gun 1
96215 Air Dual Cartridge Gun 1
8254 3/8” ID x 36 elements 10
6080 Airless Plastic Welder
Kit Includes:
612 - Quick-Weld #1Low Viscosity Adhesive For Plastic Parts622 - Quick-Weld #2 A High Viscosity Adhesive For Plastic Parts650 - Quick Set ActivatorFor Activating Quick-Weld Adhesives4182 - Inter-Bond Adhesion PromoterPromotes Adhesion To Plastic4185 - Flexible Primer SurfacerFor Priming And Resurfacing Plastics4522 - Ultra-Fine Texture Coating BlackMatches most OEM Finishes4700 - Super Cleaning SolventFor Surface Preparation Of Plastics8001 - Hi-Stress EpoxyRigid to Semi-Rigid Epoxy Repair Adhesive And Resurfacer8010 - EpoxyflexFlexible to Semi-Flexible Epoxy Repair Adhesive And Surfacer8080 - Easy-SandUsed For Skim Coat8408 - INTER-MIX 40sec RSR - General PurposeRigid to Semi-Rigid Epoxy Repair Adhesive And Resurfacer8409 - INTER-MIX 40sec FSF - General PurposeFlexible to Semi-Flexible Epoxy Repair Adhesive And Surfacer8416 - INTER-MIX 5 Hi-Stress EpoxyRigid to Semi-Rigid Epoxy Repair Adhesive And Resurfacer8417 - INTER-MIX 5 EpoxyflexFlexible to Semi-Flexible Epoxy Repair Adhesive And Surfacer70525 - Fiberglass Repair TapeFor Reinforcing Repairs70528 - Aluminum Foil Body Repair TapeFor Reinforcing Repairs70540 - Plastic Repair Release FilmFor Prepping Repair Adhesive With Fiberglass Tape 96212 - Manual Dual Cartridge GunFor Dispensing Dual Cartridge Products
PLASTIC REPAIR KIT
All the items you need for plastic repair. Product #PRA2 also includes a #6080 Plastic Welder Kit.
Description Units/Case
Plastic Repair Kit 1
Prod. No.
PRA1
PRA2 Repair Kit w/Welder 1
PLASTIC REPAIR KITS
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Applicator GunsApplicator Guns www.internationalepoxies.comwww.internationalepoxies.com
INTER-TACKA premium grade contact adhesive designed for automotive and industrial applications. Features: fast dry, high tack, long open time, heat resistant, high strength. Bonds to a wide variety of materials; metal, cloth, fiberglass insulation, wood, decorative laminates, foam and plastics. Can be used with IES #1660 Adjustable Siphon Gun.
Prod. No. Size Units/Case
230 32 oz. can 4
www.internationalepoxies.comwww.internationalepoxies.com
INTER-MIX™ 5 EPOXY-CLEARQUICK SETTING ADHESIVESets in approx. 5 minutes*
A two part high strength adhesive, filler, laminator and surfacer designed for bonding or repairing. Work Time: 5 min. Handling Strength: 15 min. Cures: 6 to 8 hours. Sandable/Paintable: 15 to 30 min.
Dispenses with #96211, #96212 or #96214 gun.
5 fl. oz. kit (150mL)
Prod. No. Size Units/Case
8460 4(w/ 2 static mixers)
CLEAR EPOXY ADHESIVESets in approx. 5 minutes*
Used wherever a clear high strength bond is needed. Bonds to: steel, aluminum, SMC, fiberglass, glass and most other plastics. Handling strength in 10 to 20 minutes.
Dispenses with Hand Dispenser or #96204 Gun.
Prod. No. Size Units/Case
8030 30 mL kit (syringe) 12(Includes 1 Hand Dispenser)
QUICKIE-FIX 4040 Second Repair Adhesive / CompoundSets in approx. 40 seconds*
A fast set epoxy repair compound used for bonding, filling and finishing. Used on plastics, FRP, SMC, fiberglass and metal parts. Excellent bonding and sanding characteristics. Accepts automotive primers and paints.
Dispenses with #96204 gun.
Prod. No. Size Units/Case
8440 50 mL kit 6(w/ 2 #8249 static mixers)
1313
CONVERSION KIT
Converts a standard caulking gun into a dual cartridge gun that will dispense 50 mL kits.
Prod. No. Description Units/Case
Conversion Kit 196206
50 ML DUAL CARTRIDGE GUN
A high quality, heavy-duty gun designed for use with 50 mL cartridge kits. This gun features an automatic pressure release to minimize dripping.
Prod. No. Description Units/Case
50 mL Dual Cart. Gun 196204
OEM PATTERNSPRAYABLE/CAULKINGSEAM SEALER GUNThis applicator spray gun, when used with IES #1587 & #1588 Rubber Base Seam Sealer, makes it easy to duplicate OEM finish on seams and provides various beads and textures needed during vehicle body repair work. Applications: Body Seams, Spoilers, Wheel Wells, Welded Seams, Side Walls, Door Skins, Engine Compartments, Floor & Bottom Panels.
Prod. No. Size Units/Case
1575 Gun Kit 1
Kit includes: nozzles for applying various bead patterns;2 #1576 spray nozzles, 2 #1577 nozzles and 1 #1578 nozzle.
1576 Round Nozzle-Beads 12
1577 Notched Nozz.-Door Skin 12
1578 Grey Nozzle-Precision 3
SAUSAGE TYPE APPLICATOR GUNMechanical advantage (12:1)
This heavy duty gun is for 10.5 oz. sausage packs. All component parts are replaceable. Light weight, barrel is made of drawn aluminum and the handle is die cast aluminum. Provides easy pumping with precise application.
96208 Sausage Type Gun 1
1571 Replacement Tips 6
Prod. No. Description Units/Case
CAULKING GUN Heavy Duty, Extra ThrustMechanical advantage (18:1)
This heavy duty skeleton style caulking gun can be used with standard 11 oz. cartridges. All component parts are replaceable. Barrel turns for application around corners. Built-in ladder hook and puncture tool. Thumb release.
96199 Heavy Duty Gun 1
Prod. No. Description Units/Case
General AdhesivesGeneral Adhesives
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
General AdhesivesGeneral Adhesiveswww.internationalepoxies.comwww.internationalepoxies.com
MOULD FASTA fast tacking contact adhesive formulated to quickly reattach body side mouldings, bumper mouldings and emblems. Heat resistant.
Prod. No. Size Units/Case
219 8 fl. oz. brush top can 12
STIK-UMMA high-strength, multi-purpose adhesive. Wet/dry. Water clear when dry. Use on weatherstrip, gaskets, trim, etc. Flexible.
Prod. No. Size Units/Case
225 8 fl. oz. brush top can 12
226 5 fl. oz. tube 12
QUICK-WELD #2A high viscosity (thicker), cyanoacrylate adhesive. Used to bond irregular surfaces or when gap filling requirements are needed. Cures to a film strength of 5000 PSI.
QUICK-WELD #1A low viscosity, water thin cyanoacrylate adhesive. Used mainly for bonding close fitting parts or where penetration is needed. Cures to a film strength of 5000 PSI.
Prod. No. Size Units/Case
612 1 fl. oz. bottle 4
QUICK SET ACTIVATORUsed to activate QUICK-WELD adhesives or other instant adhesives. Can also be used to prime one of the mating surfaces to insure a successful bond. Can also be used to spray over a bonded area for a quick set.
Prod. No. Size Units/Case
650 4 fl. oz. spray pump 2
QUICK-WELD ADHESIVE KITAn excellent repair adhesive kit for most plastics, urethane, SMC and fiberglass. Used on grilles, knobs, mouldings, emblems and countless other uses.
Includes: 1 QUICK-WELD #1, 1 QUICK-WELD #2,1 QUICK-SET ACTIVATOR
Prod. No. Size Units/Case
631 6 fl. oz. kit 1
1414
SPRAY ADHESIVEFast tacking cement for use on cork, rubber, paper and metal gaskets. Used for holding gaskets in place during assembly. Long tack time. High heat resistance. High strength. Sprays evenly.
Prod. No. Size Units/Case
4503 20 fl. oz. aerosol can 12
WEATHERSTRIP REPAIR (BLACK)Repairs torn or cut weatherstrip gaskets. Feathers and smooths so evenly, repair is virtually unnoticeable. Additional feathering can be achieved after repair has skinned, by using IES Super Cleaning Solvent on a cloth.BLACK.
SUPER WEATHERSTRIP ADHESIVE (BLACK)A fast setting high bond adhesive for bonding all types of rubber weatherstrip gaskets, vinyl's and other trim pieces. An excellent adhesive for rubber, paper and cork gaskets. Resists oil, grease, solvents, heat, cold and moisture resistant. Remains flexible, will not become brittle. BLACK.
Prod. No. Size Units/Case
1535 5 fl. oz. tube 12
SUPER SPRAY TRIM ADHESIVEDesigned for a wide variety of bonding applications. Excellent adhesion to urethane foam, cloth, carpet, leather and cloth-backed vinyl. High viscosity. 5-way spray pattern.
Prod. No. Size Units/Case
4520 20 fl. oz. size aerosol 12
Prod. No. Size Units/Case
1525 5 fl. oz. tube 12
Prod. No. Size Units/Case
622 1 fl. oz. bottle 4
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Applicator GunsApplicator Guns www.internationalepoxies.comwww.internationalepoxies.com
INTER-TACKA premium grade contact adhesive designed for automotive and industrial applications. Features: fast dry, high tack, long open time, heat resistant, high strength. Bonds to a wide variety of materials; metal, cloth, fiberglass insulation, wood, decorative laminates, foam and plastics. Can be used with IES #1660 Adjustable Siphon Gun.
Prod. No. Size Units/Case
230 32 oz. can 4
www.internationalepoxies.comwww.internationalepoxies.com
INTER-MIX™ 5 EPOXY-CLEARQUICK SETTING ADHESIVESets in approx. 5 minutes*
A two part high strength adhesive, filler, laminator and surfacer designed for bonding or repairing. Work Time: 5 min. Handling Strength: 15 min. Cures: 6 to 8 hours. Sandable/Paintable: 15 to 30 min.
Dispenses with #96211, #96212 or #96214 gun.
5 fl. oz. kit (150mL)
Prod. No. Size Units/Case
8460 4(w/ 2 static mixers)
CLEAR EPOXY ADHESIVESets in approx. 5 minutes*
Used wherever a clear high strength bond is needed. Bonds to: steel, aluminum, SMC, fiberglass, glass and most other plastics. Handling strength in 10 to 20 minutes.
Dispenses with Hand Dispenser or #96204 Gun.
Prod. No. Size Units/Case
8030 30 mL kit (syringe) 12(Includes 1 Hand Dispenser)
QUICKIE-FIX 4040 Second Repair Adhesive / CompoundSets in approx. 40 seconds*
A fast set epoxy repair compound used for bonding, filling and finishing. Used on plastics, FRP, SMC, fiberglass and metal parts. Excellent bonding and sanding characteristics. Accepts automotive primers and paints.
Dispenses with #96204 gun.
Prod. No. Size Units/Case
8440 50 mL kit 6(w/ 2 #8249 static mixers)
1313
CONVERSION KIT
Converts a standard caulking gun into a dual cartridge gun that will dispense 50 mL kits.
Prod. No. Description Units/Case
Conversion Kit 196206
50 ML DUAL CARTRIDGE GUN
A high quality, heavy-duty gun designed for use with 50 mL cartridge kits. This gun features an automatic pressure release to minimize dripping.
Prod. No. Description Units/Case
50 mL Dual Cart. Gun 196204
OEM PATTERNSPRAYABLE/CAULKINGSEAM SEALER GUNThis applicator spray gun, when used with IES #1587 & #1588 Rubber Base Seam Sealer, makes it easy to duplicate OEM finish on seams and provides various beads and textures needed during vehicle body repair work. Applications: Body Seams, Spoilers, Wheel Wells, Welded Seams, Side Walls, Door Skins, Engine Compartments, Floor & Bottom Panels.
Prod. No. Size Units/Case
1575 Gun Kit 1
Kit includes: nozzles for applying various bead patterns;2 #1576 spray nozzles, 2 #1577 nozzles and 1 #1578 nozzle.
1576 Round Nozzle-Beads 12
1577 Notched Nozz.-Door Skin 12
1578 Grey Nozzle-Precision 3
SAUSAGE TYPE APPLICATOR GUNMechanical advantage (12:1)
This heavy duty gun is for 10.5 oz. sausage packs. All component parts are replaceable. Light weight, barrel is made of drawn aluminum and the handle is die cast aluminum. Provides easy pumping with precise application.
96208 Sausage Type Gun 1
1571 Replacement Tips 6
Prod. No. Description Units/Case
CAULKING GUN Heavy Duty, Extra ThrustMechanical advantage (18:1)
This heavy duty skeleton style caulking gun can be used with standard 11 oz. cartridges. All component parts are replaceable. Barrel turns for application around corners. Built-in ladder hook and puncture tool. Thumb release.
96199 Heavy Duty Gun 1
Prod. No. Description Units/Case
General AdhesivesGeneral Adhesives
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
General AdhesivesGeneral Adhesiveswww.internationalepoxies.comwww.internationalepoxies.com
MOULD FASTA fast tacking contact adhesive formulated to quickly reattach body side mouldings, bumper mouldings and emblems. Heat resistant.
Prod. No. Size Units/Case
219 8 fl. oz. brush top can 12
STIK-UMMA high-strength, multi-purpose adhesive. Wet/dry. Water clear when dry. Use on weatherstrip, gaskets, trim, etc. Flexible.
Prod. No. Size Units/Case
225 8 fl. oz. brush top can 12
226 5 fl. oz. tube 12
QUICK-WELD #2A high viscosity (thicker), cyanoacrylate adhesive. Used to bond irregular surfaces or when gap filling requirements are needed. Cures to a film strength of 5000 PSI.
QUICK-WELD #1A low viscosity, water thin cyanoacrylate adhesive. Used mainly for bonding close fitting parts or where penetration is needed. Cures to a film strength of 5000 PSI.
Prod. No. Size Units/Case
612 1 fl. oz. bottle 4
QUICK SET ACTIVATORUsed to activate QUICK-WELD adhesives or other instant adhesives. Can also be used to prime one of the mating surfaces to insure a successful bond. Can also be used to spray over a bonded area for a quick set.
Prod. No. Size Units/Case
650 4 fl. oz. spray pump 2
QUICK-WELD ADHESIVE KITAn excellent repair adhesive kit for most plastics, urethane, SMC and fiberglass. Used on grilles, knobs, mouldings, emblems and countless other uses.
Includes: 1 QUICK-WELD #1, 1 QUICK-WELD #2,1 QUICK-SET ACTIVATOR
Prod. No. Size Units/Case
631 6 fl. oz. kit 1
1414
SPRAY ADHESIVEFast tacking cement for use on cork, rubber, paper and metal gaskets. Used for holding gaskets in place during assembly. Long tack time. High heat resistance. High strength. Sprays evenly.
Prod. No. Size Units/Case
4503 20 fl. oz. aerosol can 12
WEATHERSTRIP REPAIR (BLACK)Repairs torn or cut weatherstrip gaskets. Feathers and smooths so evenly, repair is virtually unnoticeable. Additional feathering can be achieved after repair has skinned, by using IES Super Cleaning Solvent on a cloth.BLACK.
SUPER WEATHERSTRIP ADHESIVE (BLACK)A fast setting high bond adhesive for bonding all types of rubber weatherstrip gaskets, vinyl's and other trim pieces. An excellent adhesive for rubber, paper and cork gaskets. Resists oil, grease, solvents, heat, cold and moisture resistant. Remains flexible, will not become brittle. BLACK.
Prod. No. Size Units/Case
1535 5 fl. oz. tube 12
SUPER SPRAY TRIM ADHESIVEDesigned for a wide variety of bonding applications. Excellent adhesion to urethane foam, cloth, carpet, leather and cloth-backed vinyl. High viscosity. 5-way spray pattern.
Prod. No. Size Units/Case
4520 20 fl. oz. size aerosol 12
Prod. No. Size Units/Case
1525 5 fl. oz. tube 12
Prod. No. Size Units/Case
622 1 fl. oz. bottle 4
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Glass Sealers/Adhesives, Etc.Glass Sealers/Adhesives, Etc. www.internationalepoxies.comwww.internationalepoxies.com
CUT-OUT COLD KNIFE
For cutting sealants from windshields and backlites.
Prod. No. Description Units/Case
96074 Cold Knife 1
96066 Heavy Duty Blades 6
96075 Cold Knife Blades 6
BUTYL AUTO GLASS REPLACEMENT TAPE(ROUND BEAD
A non-sagging solid butyl tape for auto and truck windshields and back lights. Bonds and seals immediately on contact. Powerful adhesion.Will not break away from glass
Prod. No. Size Units/Case
4004 1/4” size 6
4010 5/16” size 6
4016 3/8” size 6
PLASTIC PUTTY STICKS
These multi-purpose tools are molded from break-resistant, self-lubricating plastic. The #96111 is beveled to a chisel on one end that can also be used as a scraper. Can be used as: a putty knife, a paddle for backfilling windshields, a pry bar for removing and installing glass that's set in a rubber channel.
Prod. No. Description Units/Case
96110 Putty Stick
96111 Putty Stick w/chisel 6
6
1515
INTERTHANE BlackUrethane Adhesive / Sealer
IES #1514 is a easy-gunning, fast curing, high viscosity windshield adhesive & sealant for replacement of bonded glass. It stays where you put it and will not run off or squeeze out after glass installation.
Use IES #1515 Urethane Cleaner Activator on pinch weld and glass areas to be bonded and then prime with IES #1516 Urethane Primer Black to ensure a proper bond. Refer to technical data sheet for specific instructions.
Meets MVSS 212 & 216 specifications when used with #1515 Cleaner and #1516 Primer. Excellent gunability. Powerful adhesion to glass, metal and all factory installed sealants.
Applied with #96199 applicator gun.
Prod. No. Size Units/Case
1514 10.5 fl. oz. cartridge 12
URETHANE CLEANER/ACTIVATOR
A specialty cleaner/activator used on the pinchweld and bonding areas of the glass prior to using IES #1516 Urethane Primer Black.
Prod. No. Size Units/Case
1515 30 mL bottle 4
URETHANE PRIMER BLACK
A specialty primer applied to the pinchweld and bonding areas of the glass prior to using IES #1514 INTER-THANE.
Prod. No. Size Units/Case
1516 30 mL bottle 4
SPRAY LEAK SEALER (Black)
Formulated to be sprayed through an extension tube to reach hard to get areas. Seals firewalls, cowl seams, plenum seams, wheel housings, etc. Comes with a 12" extension tube.
Prod. No. Size Units/Case
4590 24 fl.oz. aerosol 12
4591 12” ext. tube/button 6
4558 36” ext. tube/button 6
RTV - SILICONE SEALANT
A specially formulated gasket sealant for Automotive, Truck, R.V., Marine and Industrial applications. Seals glass, aluminum, fiberglass and foam. Adheres to painted surfaces, most plastics, rubber and wood. Also can be used for plumbing and electrical applications. When cured, stays flexible from -60°F to +500°F. Replaces cork and rubber gaskets on engines and transmissions.
Prod. No. Size Units/Case
1201 Clear 10.3 fl. oz. cartridge 12
1203 Black 10.3 fl. oz. cartridge 12
STIK-UPP REAR VIEW MIRROR ADHESIVEFor mounting rear view mirrors to windshields. Mounts over 200 mirrors. Kit contains a .50 fl. oz. of Adhesive and a .50 fl. oz. of Primer
Prod. No. Size Units/Case
670 1 fl. oz. kit 6
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
CoatingsCoatingswww.internationalepoxies.comwww.internationalepoxies.com
ULTRA-FINE TEXTURE COATING BLACK
A fast-drying "ultra-fine" texture coating that has excellent adhesion. Blendable to a variety of both interior and exterior textures. Used on bumpers, step plates, mirrors, side mouldings, impact strips, dash/trim panels, etc. ULTRA-FINE is not UV resistant and must be top coated. Matches OEM finish. Paintable in 30-60 minutes. Free of PVC's and Isocyanates!
Prod. No. Size Units/Case
4522 20 oz. aerosol can 12
INTER-TEX CHIP GUARD
Use INTER-TEX Chop Guard to restore OEM texture, finish & chip resistance to rocker panels, lower sides of quarter panels and fenders. Paintable in 30-45 minutes.Fast drying. Matches OEM finish. Flexible. High chip resistance. (20 oz. size can, net wt. 16.25 fl. oz.)
Prod. No. Description Units/Case
4523 Black INTER-TEX 12
4524 White INTER-TEX 12
FAST DRYING RUBBERIZED UNDERCOAT
Premium quality, rubber based undercoating with outstanding adhesion and abrasion resistance. Dries quickly and is tack free. Use on undercarriage, doors, trunks and fenders. Good texture and is paintable.Seals and protects. Prevents rust. Fast drying. Sound deadening. Paintable - no bleed-through. Will not chip, crack or peel.
Prod. No. Size Units/Case
4509 24 oz. aerosol can 12
ECON-O-COAT RUBBERIZED UNDERCOAT
An economy grade rubberized undercoat that protects against rust and corrosion. Quick drying, effective sound deadener, great for fender and panel replacements - NON-PAINTABLE.
Prod. No. Size Units/Case
4513 20 oz. aerosol can 12
RUBBERIZED UNDERCOAT - Solvent Based
A fast drying rubberized coating formulated with polymer resins to protect against rust, corrosion and to deaden sound on undercarriages, doors, fenders, trunks & hoods. Paintable.
Apply with #1660 Gun.
Prod. No. Size Units/Case
1600 32 fl. oz. can 6
1601 41 gallon can
ADJUSTABLE SIPHON GUN
Sprays all types of materials. Kit comes with a empty 32 oz. can. This enables you to spray a wide variety of materials with a various spectrum of patterns and textures. For use with #1600 Rubberized Undercoat.
Prod. No. Description Units/Case
1660 Adjustable Siphon Gun 1
INTER-GUARD RUST PROOFING WAX(HONEY COATING)
INTER-GUARD is a fast drying wax-based barrier film which flows readily into cracks and seams to protect metals from rust and corrosion. Offers long-term protection against weather and water. Will not crack, chip or peel. Will not attack copper, brass, steel or aluminum. Does not contain silicone.
Prod. No. Size Units/Case
4557 12
4591 12” ext. tube/button 6
20 fl.oz. aerosol can
4558 36” ext. tube/button 6
4559 36” ext. tube/spec. tip* 6* #4559 comes with a 36” extension tube & multi-directional brass spray tip.
Prod. No. Size Units/Case
1685 1Euro Economy Spray Gun
EURO ECONOMY SPRAY GUN
All metal spray gun designed for the application of soundproofing, gravel protection and bituminous/wax-based rust proofing and undercoating. Threaded collar allows for direct attachment to standard European 1 liter cans. For use with #1680 only.
Waterbourne IES STONEGUARDMulti-Purpose Texture Coating
A liquid plastic coating, water based, specially formulated for the automotive industry as an exceptional rustproofing and abrasion protection (gravelguard) material. Also provides outstanding corrosion protection and sound deadening qualities. IES Stoneguard substitutes the traditional asphalt/rubber based product with a solvent-free plastic product that is non toxic. 100% paintable. Environmentally safe - no PVC’S or VOC’S. Dispenses with #1685 or #1690 Guns.
Prod. No. Size Units/Case
1680 1232 fl. oz. bottle
Prod. No. Size Units/Case
1690 1Euro Multi Spray Gun
EURO MULTI SPRAY GUN
Designed for the spraying of undercoating, protective waxes, sound proofing and gravel protection. Gun is hermetically sealed which prevents the product from hardening during work breaks. User cab control air flow, product flow or product atomization. Set up to spray 32 oz. / 1 Liter Euro bottles or loose fill. Comes with a set of spray wands to apply wax based rustproofing in doors, cavities, beams, etc..
1616
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Glass Sealers/Adhesives, Etc.Glass Sealers/Adhesives, Etc. www.internationalepoxies.comwww.internationalepoxies.com
CUT-OUT COLD KNIFE
For cutting sealants from windshields and backlites.
Prod. No. Description Units/Case
96074 Cold Knife 1
96066 Heavy Duty Blades 6
96075 Cold Knife Blades 6
BUTYL AUTO GLASS REPLACEMENT TAPE(ROUND BEAD
A non-sagging solid butyl tape for auto and truck windshields and back lights. Bonds and seals immediately on contact. Powerful adhesion.Will not break away from glass
Prod. No. Size Units/Case
4004 1/4” size 6
4010 5/16” size 6
4016 3/8” size 6
PLASTIC PUTTY STICKS
These multi-purpose tools are molded from break-resistant, self-lubricating plastic. The #96111 is beveled to a chisel on one end that can also be used as a scraper. Can be used as: a putty knife, a paddle for backfilling windshields, a pry bar for removing and installing glass that's set in a rubber channel.
Prod. No. Description Units/Case
96110 Putty Stick
96111 Putty Stick w/chisel 6
6
1515
INTERTHANE BlackUrethane Adhesive / Sealer
IES #1514 is a easy-gunning, fast curing, high viscosity windshield adhesive & sealant for replacement of bonded glass. It stays where you put it and will not run off or squeeze out after glass installation.
Use IES #1515 Urethane Cleaner Activator on pinch weld and glass areas to be bonded and then prime with IES #1516 Urethane Primer Black to ensure a proper bond. Refer to technical data sheet for specific instructions.
Meets MVSS 212 & 216 specifications when used with #1515 Cleaner and #1516 Primer. Excellent gunability. Powerful adhesion to glass, metal and all factory installed sealants.
Applied with #96199 applicator gun.
Prod. No. Size Units/Case
1514 10.5 fl. oz. cartridge 12
URETHANE CLEANER/ACTIVATOR
A specialty cleaner/activator used on the pinchweld and bonding areas of the glass prior to using IES #1516 Urethane Primer Black.
Prod. No. Size Units/Case
1515 30 mL bottle 4
URETHANE PRIMER BLACK
A specialty primer applied to the pinchweld and bonding areas of the glass prior to using IES #1514 INTER-THANE.
Prod. No. Size Units/Case
1516 30 mL bottle 4
SPRAY LEAK SEALER (Black)
Formulated to be sprayed through an extension tube to reach hard to get areas. Seals firewalls, cowl seams, plenum seams, wheel housings, etc. Comes with a 12" extension tube.
Prod. No. Size Units/Case
4590 24 fl.oz. aerosol 12
4591 12” ext. tube/button 6
4558 36” ext. tube/button 6
RTV - SILICONE SEALANT
A specially formulated gasket sealant for Automotive, Truck, R.V., Marine and Industrial applications. Seals glass, aluminum, fiberglass and foam. Adheres to painted surfaces, most plastics, rubber and wood. Also can be used for plumbing and electrical applications. When cured, stays flexible from -60°F to +500°F. Replaces cork and rubber gaskets on engines and transmissions.
Prod. No. Size Units/Case
1201 Clear 10.3 fl. oz. cartridge 12
1203 Black 10.3 fl. oz. cartridge 12
STIK-UPP REAR VIEW MIRROR ADHESIVEFor mounting rear view mirrors to windshields. Mounts over 200 mirrors. Kit contains a .50 fl. oz. of Adhesive and a .50 fl. oz. of Primer
Prod. No. Size Units/Case
670 1 fl. oz. kit 6
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
CoatingsCoatingswww.internationalepoxies.comwww.internationalepoxies.com
ULTRA-FINE TEXTURE COATING BLACK
A fast-drying "ultra-fine" texture coating that has excellent adhesion. Blendable to a variety of both interior and exterior textures. Used on bumpers, step plates, mirrors, side mouldings, impact strips, dash/trim panels, etc. ULTRA-FINE is not UV resistant and must be top coated. Matches OEM finish. Paintable in 30-60 minutes. Free of PVC's and Isocyanates!
Prod. No. Size Units/Case
4522 20 oz. aerosol can 12
INTER-TEX CHIP GUARD
Use INTER-TEX Chop Guard to restore OEM texture, finish & chip resistance to rocker panels, lower sides of quarter panels and fenders. Paintable in 30-45 minutes.Fast drying. Matches OEM finish. Flexible. High chip resistance. (20 oz. size can, net wt. 16.25 fl. oz.)
Prod. No. Description Units/Case
4523 Black INTER-TEX 12
4524 White INTER-TEX 12
FAST DRYING RUBBERIZED UNDERCOAT
Premium quality, rubber based undercoating with outstanding adhesion and abrasion resistance. Dries quickly and is tack free. Use on undercarriage, doors, trunks and fenders. Good texture and is paintable.Seals and protects. Prevents rust. Fast drying. Sound deadening. Paintable - no bleed-through. Will not chip, crack or peel.
Prod. No. Size Units/Case
4509 24 oz. aerosol can 12
ECON-O-COAT RUBBERIZED UNDERCOAT
An economy grade rubberized undercoat that protects against rust and corrosion. Quick drying, effective sound deadener, great for fender and panel replacements - NON-PAINTABLE.
Prod. No. Size Units/Case
4513 20 oz. aerosol can 12
RUBBERIZED UNDERCOAT - Solvent Based
A fast drying rubberized coating formulated with polymer resins to protect against rust, corrosion and to deaden sound on undercarriages, doors, fenders, trunks & hoods. Paintable.
Apply with #1660 Gun.
Prod. No. Size Units/Case
1600 32 fl. oz. can 6
1601 41 gallon can
ADJUSTABLE SIPHON GUN
Sprays all types of materials. Kit comes with a empty 32 oz. can. This enables you to spray a wide variety of materials with a various spectrum of patterns and textures. For use with #1600 Rubberized Undercoat.
Prod. No. Description Units/Case
1660 Adjustable Siphon Gun 1
INTER-GUARD RUST PROOFING WAX(HONEY COATING)
INTER-GUARD is a fast drying wax-based barrier film which flows readily into cracks and seams to protect metals from rust and corrosion. Offers long-term protection against weather and water. Will not crack, chip or peel. Will not attack copper, brass, steel or aluminum. Does not contain silicone.
Prod. No. Size Units/Case
4557 12
4591 12” ext. tube/button 6
20 fl.oz. aerosol can
4558 36” ext. tube/button 6
4559 36” ext. tube/spec. tip* 6* #4559 comes with a 36” extension tube & multi-directional brass spray tip.
Prod. No. Size Units/Case
1685 1Euro Economy Spray Gun
EURO ECONOMY SPRAY GUN
All metal spray gun designed for the application of soundproofing, gravel protection and bituminous/wax-based rust proofing and undercoating. Threaded collar allows for direct attachment to standard European 1 liter cans. For use with #1680 only.
Waterbourne IES STONEGUARDMulti-Purpose Texture Coating
A liquid plastic coating, water based, specially formulated for the automotive industry as an exceptional rustproofing and abrasion protection (gravelguard) material. Also provides outstanding corrosion protection and sound deadening qualities. IES Stoneguard substitutes the traditional asphalt/rubber based product with a solvent-free plastic product that is non toxic. 100% paintable. Environmentally safe - no PVC’S or VOC’S. Dispenses with #1685 or #1690 Guns.
Prod. No. Size Units/Case
1680 1232 fl. oz. bottle
Prod. No. Size Units/Case
1690 1Euro Multi Spray Gun
EURO MULTI SPRAY GUN
Designed for the spraying of undercoating, protective waxes, sound proofing and gravel protection. Gun is hermetically sealed which prevents the product from hardening during work breaks. User cab control air flow, product flow or product atomization. Set up to spray 32 oz. / 1 Liter Euro bottles or loose fill. Comes with a set of spray wands to apply wax based rustproofing in doors, cavities, beams, etc..
1616
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
PrimersPrimers www.internationalepoxies.comwww.internationalepoxies.com
CoatingsCoatingsRUST-RAIDER™ Surface Prep
RUST-RAIDER™ etches steel & aluminum to improve adhesion of adhesives. It is the ideal item for you to use when you want to ready a rusted surface for painting! Conveniently packaged in a 32 oz. bottle with a heavy-duty spray head, RUST-RAIDER™ is a snap to use! Fast acting and easy to apply. Professional strength. Extends life of coatings. Neutralizes rust, Prevents further corrosion. Converts rust to a phosphate polymer coating.
Prod. No. Size Units/Case
1840 32 oz. bottle 6(w/ spray applicator)
INTER-WELD (WELD THRU PRIMER)
A high solids zinc rich primer, formulated to provide corrosion protection between panels when spot welding with MIG welders. Meets MIL Spec MIL-p-46105 (MR).
Prod. No. Size Units/Case
4525 16 oz. aerosol can 12
4526 8 fl. oz. brush top can 12
INTER-BOND ADHESION PROMOTER
A specially designed formula to promote super strong adhesion to all TPO-polyolefin based materials. before painting or repairing. Seals in oils and plasticizers that are an integral part of any polyolefin based substrate. Fast tacking. Non isocyanate.
Prod. No. Size Units/Case
4182 16 oz. aerosol can 12
FLEXIBLE PRIMER SURFACER (Gray)
A fast drying, easy sanding, flexible primer formulated for all flexible/rigid plastic autobody parts. Good filing and easy sanding. Dries in 5-10 minutes and can be feathered. High solids content. Compatible with most common automotive paint.
Prod. No. Size Units/Case
4185 20 oz. aerosol can 12
IES SELF-ETCHING PRIMER (GREEN)
This primer chemically etches the surface of bare metal to replace the "metal conditioning" (E-Coat) step on bare metal. May be used for the repair of small rub-throughs to bare metal or the complete coating of new panels. Professional fan spray. Corrosion resistant. Excellent adhesion. Dries fast. Easy to use. No measuring, mixing or gun cleaning.
Prod. No. Size Units/Case
4186 20 oz. aerosol can 12
AEROSOL TRIM PAINT
High quality, heat resistant paints that match OEM trim colors. Excellent adhesion and resistance to the suns ultraviolet rays. All paints are in 16 fl. oz. aerosol cans.
Prod. No. Description Units/Case
4192 Flat black enamel 12
4187 Semi-gloss black enamel 12
4193 Gloss black enamel 12
4195 Gloss white enamel 12
4518 Semi-gloss black lacquer 12
4201 Silver-Tone lacquer 12
4203 Clear gloss lacquer 12
FLEXIBLE BUMPER COAT
Matches OEM low gloss bumper and trim parts. Can be used on rigid and flexible surfaces. Polyurethane Enamel. Excellent UV resistance.
Prod. No. Size Units/Case
4189 16 fl. oz. aerosol can 12
EUROPEAN BLACK TRIM PAINT
Matches OEM European bumper and trim parts. Can be used on rigid and flexible surfaces. Polyurethane Enamel. Excellent UV resistance.
Prod. No. Size Units/Case
4519 16 fl. oz. aerosol can 12
PaintsPaints
1717
JAMB IT Clear
JAMB-IT Clear is a convenient, fast-drying acrylic clearcoat for use on door jamb areas, under the hood, trunk areas & small spot repairs. Provides excellent gloss, clarity & image depth.
Fast DryingExceptional ClarityExcellent Gloss
Prod. No. Size Units/Case
4205 20 fl. oz. aerosol can 12
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Specialty CleanersSpecialty Cleanerswww.internationalepoxies.comwww.internationalepoxies.com
PrimersPrimers
EZ STRIP PAINT & GASKET REMOVER
A fast acting formula that quickly penetrates through layers of paint, vinyl decals and baked gaskets to strip them from the surface.
Prod. No. Description Units/Case
4521 20 fl. oz. aerosol can 12
SUPER CLEANING SOLVENT
A quick, safe, multi-purpose solvent. Excellent for removing silicone wax, adhesives, tar, undercoating, sealers, paint overspray and bugs. Safe on most fully cured paints, fabric, vinyl, glass and most plastics. Non-staining. Film free. Contains no Chlorinated Solvents or CFC'S.
Prod. No. Size Units/Case
4700 24 oz. aerosol can 12
1700 32 fl. oz. can 12
1701 1 gallon can 4
1702 5 gallon pail 1
1703 55 gallon drum 1
QUICKIE 5000ADHESIVE / CEMENT REMOVER
An extra strength, fast acting solvent for removing dried rubber cement, sealers, overspray, undercoating, tar, silicone and wax. Fast drying. Non-staining. Film free.Contains no Chlorinated Solvents or CFC'S.
Prod. No. Size Units/Case
4750 24 oz. aerosol can 12
1750 32 fl. oz. can 12
1752 5 gallon pail 1
1753 55 gallon drum 1
THROTTLE BODY & CARBURETOR CLEANER
Cleans and frees automatic chokes, air intake manifolds, throttle bodies, carburetor valves, PVC valves and transmission valve body assemblies from varnish, gum, etc. High pressure spray. Leaves no residue
Prod. No. Description Units/Case
4577 20 fl. oz. aerosol can 12
1818
STANDARD DUTY LEVER BARREL PUMP
A pump designed for use with our #4540-55. Fits 5 to 55 gallon drums with Standard Bung. Ideal for water, water based chemicals, alcohol, kerosene, petroleum based products, gas, diesel and mild acid and alkali solutions.
Prod. No. Description Units/CasePUMP4540-55 Standard Pump 1
ALUMINUM SPRAYER
A refillable and rechargeable sprayer that looks and works much like an aerosol. 16 oz. Sprayer.
Prod. No. Description Units/CaseMS8000PL Aluminum Sprayer 1
Measuring Cup - 1 Qt. 1MS07362
STEEL SPRAYER
A steel sprayer that can be used with most oil and solvent based materials. 32 oz. Sprayer.
Prod. No. Description Units/CaseMS1000 Steel Sprayer 1
Measuring Cup - 1 Qt. 1MS07362
BRAKE CLEANER - 55 GALLON DRUM
A premium quality cleaner for removing oil, grease and brake fluid from conventional and disc brake components. Will not harm rubber parts. Leaves no residue. Non-Chlorinated.
BRAKE CLEANER
A premium quality cleaner for removing oil, grease and brake fluid from conventional and disc brake components. Will not harm rubber parts. Leaves no residue. 20 fl. oz. aerosol can
Prod. No. Description Units/Case4540 Non-Chlorinated 12
Prod. No. Description Units/Case
4540-55 Non-Chlor. 55 gal. drum 1
ZINC PHOSPHATE PRIMER
Used to prime aluminum and galvanized surfaces to prevent color coats from peeling off. Excellent adhesion. Also provides excellent corrosion protection.
Prod. No. Size Units/Case
4530 16 fl. oz. aerosol can 12
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
PrimersPrimers www.internationalepoxies.comwww.internationalepoxies.com
CoatingsCoatingsRUST-RAIDER™ Surface Prep
RUST-RAIDER™ etches steel & aluminum to improve adhesion of adhesives. It is the ideal item for you to use when you want to ready a rusted surface for painting! Conveniently packaged in a 32 oz. bottle with a heavy-duty spray head, RUST-RAIDER™ is a snap to use! Fast acting and easy to apply. Professional strength. Extends life of coatings. Neutralizes rust, Prevents further corrosion. Converts rust to a phosphate polymer coating.
Prod. No. Size Units/Case
1840 32 oz. bottle 6(w/ spray applicator)
INTER-WELD (WELD THRU PRIMER)
A high solids zinc rich primer, formulated to provide corrosion protection between panels when spot welding with MIG welders. Meets MIL Spec MIL-p-46105 (MR).
Prod. No. Size Units/Case
4525 16 oz. aerosol can 12
4526 8 fl. oz. brush top can 12
INTER-BOND ADHESION PROMOTER
A specially designed formula to promote super strong adhesion to all TPO-polyolefin based materials. before painting or repairing. Seals in oils and plasticizers that are an integral part of any polyolefin based substrate. Fast tacking. Non isocyanate.
Prod. No. Size Units/Case
4182 16 oz. aerosol can 12
FLEXIBLE PRIMER SURFACER (Gray)
A fast drying, easy sanding, flexible primer formulated for all flexible/rigid plastic autobody parts. Good filing and easy sanding. Dries in 5-10 minutes and can be feathered. High solids content. Compatible with most common automotive paint.
Prod. No. Size Units/Case
4185 20 oz. aerosol can 12
IES SELF-ETCHING PRIMER (GREEN)
This primer chemically etches the surface of bare metal to replace the "metal conditioning" (E-Coat) step on bare metal. May be used for the repair of small rub-throughs to bare metal or the complete coating of new panels. Professional fan spray. Corrosion resistant. Excellent adhesion. Dries fast. Easy to use. No measuring, mixing or gun cleaning.
Prod. No. Size Units/Case
4186 20 oz. aerosol can 12
AEROSOL TRIM PAINT
High quality, heat resistant paints that match OEM trim colors. Excellent adhesion and resistance to the suns ultraviolet rays. All paints are in 16 fl. oz. aerosol cans.
Prod. No. Description Units/Case
4192 Flat black enamel 12
4187 Semi-gloss black enamel 12
4193 Gloss black enamel 12
4195 Gloss white enamel 12
4518 Semi-gloss black lacquer 12
4201 Silver-Tone lacquer 12
4203 Clear gloss lacquer 12
FLEXIBLE BUMPER COAT
Matches OEM low gloss bumper and trim parts. Can be used on rigid and flexible surfaces. Polyurethane Enamel. Excellent UV resistance.
Prod. No. Size Units/Case
4189 16 fl. oz. aerosol can 12
EUROPEAN BLACK TRIM PAINT
Matches OEM European bumper and trim parts. Can be used on rigid and flexible surfaces. Polyurethane Enamel. Excellent UV resistance.
Prod. No. Size Units/Case
4519 16 fl. oz. aerosol can 12
PaintsPaints
1717
JAMB IT Clear
JAMB-IT Clear is a convenient, fast-drying acrylic clearcoat for use on door jamb areas, under the hood, trunk areas & small spot repairs. Provides excellent gloss, clarity & image depth.
Fast DryingExceptional ClarityExcellent Gloss
Prod. No. Size Units/Case
4205 20 fl. oz. aerosol can 12
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Specialty CleanersSpecialty Cleanerswww.internationalepoxies.comwww.internationalepoxies.com
PrimersPrimers
EZ STRIP PAINT & GASKET REMOVER
A fast acting formula that quickly penetrates through layers of paint, vinyl decals and baked gaskets to strip them from the surface.
Prod. No. Description Units/Case
4521 20 fl. oz. aerosol can 12
SUPER CLEANING SOLVENT
A quick, safe, multi-purpose solvent. Excellent for removing silicone wax, adhesives, tar, undercoating, sealers, paint overspray and bugs. Safe on most fully cured paints, fabric, vinyl, glass and most plastics. Non-staining. Film free. Contains no Chlorinated Solvents or CFC'S.
Prod. No. Size Units/Case
4700 24 oz. aerosol can 12
1700 32 fl. oz. can 12
1701 1 gallon can 4
1702 5 gallon pail 1
1703 55 gallon drum 1
QUICKIE 5000ADHESIVE / CEMENT REMOVER
An extra strength, fast acting solvent for removing dried rubber cement, sealers, overspray, undercoating, tar, silicone and wax. Fast drying. Non-staining. Film free.Contains no Chlorinated Solvents or CFC'S.
Prod. No. Size Units/Case
4750 24 oz. aerosol can 12
1750 32 fl. oz. can 12
1752 5 gallon pail 1
1753 55 gallon drum 1
THROTTLE BODY & CARBURETOR CLEANER
Cleans and frees automatic chokes, air intake manifolds, throttle bodies, carburetor valves, PVC valves and transmission valve body assemblies from varnish, gum, etc. High pressure spray. Leaves no residue
Prod. No. Description Units/Case
4577 20 fl. oz. aerosol can 12
1818
STANDARD DUTY LEVER BARREL PUMP
A pump designed for use with our #4540-55. Fits 5 to 55 gallon drums with Standard Bung. Ideal for water, water based chemicals, alcohol, kerosene, petroleum based products, gas, diesel and mild acid and alkali solutions.
Prod. No. Description Units/CasePUMP4540-55 Standard Pump 1
ALUMINUM SPRAYER
A refillable and rechargeable sprayer that looks and works much like an aerosol. 16 oz. Sprayer.
Prod. No. Description Units/CaseMS8000PL Aluminum Sprayer 1
Measuring Cup - 1 Qt. 1MS07362
STEEL SPRAYER
A steel sprayer that can be used with most oil and solvent based materials. 32 oz. Sprayer.
Prod. No. Description Units/CaseMS1000 Steel Sprayer 1
Measuring Cup - 1 Qt. 1MS07362
BRAKE CLEANER - 55 GALLON DRUM
A premium quality cleaner for removing oil, grease and brake fluid from conventional and disc brake components. Will not harm rubber parts. Leaves no residue. Non-Chlorinated.
BRAKE CLEANER
A premium quality cleaner for removing oil, grease and brake fluid from conventional and disc brake components. Will not harm rubber parts. Leaves no residue. 20 fl. oz. aerosol can
Prod. No. Description Units/Case4540 Non-Chlorinated 12
Prod. No. Description Units/Case
4540-55 Non-Chlor. 55 gal. drum 1
ZINC PHOSPHATE PRIMER
Used to prime aluminum and galvanized surfaces to prevent color coats from peeling off. Excellent adhesion. Also provides excellent corrosion protection.
Prod. No. Size Units/Case
4530 16 fl. oz. aerosol can 12
LIQUID GASKET LOW VOLATILERTV SILICONE SEALANT
A specially formulated gasket sealant for automotive, marine and industrial applications. Full-bodied, will not sag or run. Replaces rubber and cork gaskets.Sensor safe. High temp. range: Black and Clear: 500°F, Red: 600°F Remains flexible, skins over rapidly.
Packaged in a 7.25 oz. Auto-Tube. The Auto-Tube dispenses an even 1/8" bead of silicone and is faster than standard tubes. Advantages include 95% evacuation and superior flow control.
Prod. No. Description Units/Case
1210 Clear, Non-corrosive 12
1211 Black, Non-corrosive 12
1212 Red, Low-Volatile 12
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
RTV - SILICONE SEALANT
A specially formulated gasket sealant for Automotive, Truck, R.V., Marine and Industrial applications. Seals glass, aluminum, fiberglass and foam. Adheres to painted surfaces, most plastics, rubber and wood. Also can be used for plumbing and electrical applications. When cured, stays flexible from -60°F to +500°F. Replaces cork and rubber gaskets on engines and transmissions.
Prod. No. Size Units/Case
1201 Clear 10.3 fl. oz. cartridge 12
1203 Black 10.3 fl. oz. cartridge 12
INTER-LOCK #90 (GREEN)
A wicking mid-grade strength thread locker used on pre-assembled fasteners. Eliminates bolt removal. Secures set screws and other adjustable assemblies after adjusting.
Prod. No. Size Units/Case
794 1.5 gram tube 25
790 10 mL bottle 4
791 50 mL bottle 4
INTER-LOCK #71 (RED)
A high strength thread locker used in applications where extreme shock, vibration and/or environmental conditions are present. used on fasteners up to 1" diameter.
Prod. No. Size Units/Case
774 1.5 gram tube 25
771 10 mL bottle 4
772 50 mL bottle 4
1.5 gram tube
INTER-LOCK #42 (BLUE)
A medium strength, general purpose thread locker for nuts, bolts and screws 1/4" (6mm) and larger. Prevents vibration loosening and is removable with hand tools.
Prod. No. Size Units/Case
744 25
742 10 mL bottle 4
743 50 mL bottle 4
INTER-LOCK #22 (PURPLE)
A low strength thread locker where easy disassembly is required. Designed for precision fasteners under 1/4" (6mm) that require occasional adjustment.
Prod. No. Size Units/Case
724 1.5 gram tube 25
722 10 mL bottle 4
723 50 mL bottle 4
Service AidsService Aids www.internationalepoxies.comwww.internationalepoxies.com
RUST BUSTERPENETRATING OIL with Graphite
RUST-BUSTER penetrates deep and fast to release rusty bolts, nuts and fittings almost instantly. A long lasting lubricant that protects against further rusting. Fast capillary action. Excellent penetration. High graphite content for additional lubrication. Contains no silicone - Body Shop safe! No chlorinated solvents.
CLEAR PEN-LUBE
A multi-purpose clear lubricant. Penetrates instantly. Prevents rust. Sprays thin - changes to a grease. No silicone - Body Shop safe! Tenacious adhesion. Safe on paint. Will not wash off.
Prod. No. Size Units/Case
4550 20 fl. oz. aerosol can 12
BRAKE SILENCER
Specially formulated to help prevent brake squeal on disc brake systems. IES Brake Silencer soaks into pad surface to fill voids and pits. Reduces comebacks and improves customer satisfaction.
Prod. No. Size Units/Case
1450 8 fl. oz. can 12
SPRAY ADHESIVEFast tacking cement for use on cork, rubber, paper and metal gaskets. Used for holding gaskets in place during assembly. Long tack time. High heat resistance. High strength. Sprays evenly.
Prod. No. Size Units/Case
4503 20 fl. oz. aerosol can 12
1919 Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Service AidsService Aidswww.internationalepoxies.comwww.internationalepoxies.com
LEAK FINDER TRACING POWDER
Locates: wind, water and dust leaks easily. Finds leaks around glass, doors, trunks, hatchbacks, body seams, transmissions, engines, etc.
Prod. No. Size Units/Case
4580 12 fl. oz. aerosol can 12
WHITE LITHIUM GREASE
A heavy-bodied, lithium based lubricant used to lubricate hinges, latches, window regulators, cables and other metal to metal contact parts. Heat resistant. Will not wash off. Will not run or drip.
Prod. No. Size Units/Case
4505 16 fl. oz. aerosol can 12
IES-2000 ANTI-SEIZE LUBRICANT
A special copper and graphite lubricant used to prevent seizing, galling, reduce friction and prevent corrosion. Withstands temperatures of 2000°F. Uses: brake parts, bolts, nuts, etc. Will not wash off. Excellent on frame machine bolts.
Prod. No. Size Units/Case
1470 8 fl. oz. brush top can 12
4570 16 fl. oz. aerosol can 12
DRY-TEF LUBE
A non-greasy, non-staining, clear, dry lubricant for most surfaces. Eliminates squeaking and chirping due to friction. Will not attract dust and dirt or stain fabric. No silicone - Body Shop safe!
Prod. No. Size Units/Case
4560 20 fl. oz. aerosol can 12
5 WAY LUBE CORROSION FIGHTER (CLEAR)
Designed for fast penetration and lubrication of rusted or corroded parts. Lubricates. Demoisturizes. Prevents rust. Safe on rubber, plastic and electrical parts. No silicone - Body Shop Safe! Clear. Meets government spec. MIL-C-23411.
Prod. No. Size Units/Case
4516 20 fl. oz. aerosol can 12
SLC SILICONE LUBRICATING COMPOUND
A transparent, heavy consistency silicone grease. reconditions rubber and vinyl. Can be used on: electrical connections as a dielectric grease, fan belts, rubber brake parts, o-rings, etc.
Prod. No. Size Units/Case
1412 8 fl. oz. brush top can 12
SILICONE SPRAY 100%
Lubricates, waterproofs and protects various surfaces. Stops squeaks and prevents weatherstrips and windows from sticking. Provides lubrication from -70°F to +400°F.
Prod. No. Size Units/Case
4504 16 fl. oz. aerosol can 12
BATTERY PROTECTOR & SEALER
Everybody knows that air and moisture combine to form corrosion on your battery terminals. Battery Protector & Sealer form IES seals and protects your terminals from that corrosion, which is a major cause of hard starting and battery failure. Prevents corrosion. Long-lasting protection. Seals terminals, cables and ignition systems. Extends battery life. Helps stop acid leaks around terminals.
Prod. No. Size Units/Case
4585 20 fl. oz. aerosol can 12
BATTERY CLEANER/LEAK DETECTOR/ACID NEUTRALIZER
Provides an easy way to remove power-sapping corrosion from all battery parts. This superior foaming cleaner will also detect acid leaking terminal joints and cracked cases (by changing color), which rob batteries of power and shorten battery life. Excellent clean-up and neutralizer for broken batteries in the body shop.
Prod. No. Size Units/Case
4586 16 fl. oz. aerosol can 12
2020
Prod No. Size Units/Case
4777 20 oz. size can 12
LIQUID GASKET LOW VOLATILERTV SILICONE SEALANT
A specially formulated gasket sealant for automotive, marine and industrial applications. Full-bodied, will not sag or run. Replaces rubber and cork gaskets.Sensor safe. High temp. range: Black and Clear: 500°F, Red: 600°F Remains flexible, skins over rapidly.
Packaged in a 7.25 oz. Auto-Tube. The Auto-Tube dispenses an even 1/8" bead of silicone and is faster than standard tubes. Advantages include 95% evacuation and superior flow control.
Prod. No. Description Units/Case
1210 Clear, Non-corrosive 12
1211 Black, Non-corrosive 12
1212 Red, Low-Volatile 12
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
RTV - SILICONE SEALANT
A specially formulated gasket sealant for Automotive, Truck, R.V., Marine and Industrial applications. Seals glass, aluminum, fiberglass and foam. Adheres to painted surfaces, most plastics, rubber and wood. Also can be used for plumbing and electrical applications. When cured, stays flexible from -60°F to +500°F. Replaces cork and rubber gaskets on engines and transmissions.
Prod. No. Size Units/Case
1201 Clear 10.3 fl. oz. cartridge 12
1203 Black 10.3 fl. oz. cartridge 12
INTER-LOCK #90 (GREEN)
A wicking mid-grade strength thread locker used on pre-assembled fasteners. Eliminates bolt removal. Secures set screws and other adjustable assemblies after adjusting.
Prod. No. Size Units/Case
794 1.5 gram tube 25
790 10 mL bottle 4
791 50 mL bottle 4
INTER-LOCK #71 (RED)
A high strength thread locker used in applications where extreme shock, vibration and/or environmental conditions are present. used on fasteners up to 1" diameter.
Prod. No. Size Units/Case
774 1.5 gram tube 25
771 10 mL bottle 4
772 50 mL bottle 4
1.5 gram tube
INTER-LOCK #42 (BLUE)
A medium strength, general purpose thread locker for nuts, bolts and screws 1/4" (6mm) and larger. Prevents vibration loosening and is removable with hand tools.
Prod. No. Size Units/Case
744 25
742 10 mL bottle 4
743 50 mL bottle 4
INTER-LOCK #22 (PURPLE)
A low strength thread locker where easy disassembly is required. Designed for precision fasteners under 1/4" (6mm) that require occasional adjustment.
Prod. No. Size Units/Case
724 1.5 gram tube 25
722 10 mL bottle 4
723 50 mL bottle 4
Service AidsService Aids www.internationalepoxies.comwww.internationalepoxies.com
RUST BUSTERPENETRATING OIL with Graphite
RUST-BUSTER penetrates deep and fast to release rusty bolts, nuts and fittings almost instantly. A long lasting lubricant that protects against further rusting. Fast capillary action. Excellent penetration. High graphite content for additional lubrication. Contains no silicone - Body Shop safe! No chlorinated solvents.
CLEAR PEN-LUBE
A multi-purpose clear lubricant. Penetrates instantly. Prevents rust. Sprays thin - changes to a grease. No silicone - Body Shop safe! Tenacious adhesion. Safe on paint. Will not wash off.
Prod. No. Size Units/Case
4550 20 fl. oz. aerosol can 12
BRAKE SILENCER
Specially formulated to help prevent brake squeal on disc brake systems. IES Brake Silencer soaks into pad surface to fill voids and pits. Reduces comebacks and improves customer satisfaction.
Prod. No. Size Units/Case
1450 8 fl. oz. can 12
SPRAY ADHESIVEFast tacking cement for use on cork, rubber, paper and metal gaskets. Used for holding gaskets in place during assembly. Long tack time. High heat resistance. High strength. Sprays evenly.
Prod. No. Size Units/Case
4503 20 fl. oz. aerosol can 12
1919 Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Service AidsService Aidswww.internationalepoxies.comwww.internationalepoxies.com
LEAK FINDER TRACING POWDER
Locates: wind, water and dust leaks easily. Finds leaks around glass, doors, trunks, hatchbacks, body seams, transmissions, engines, etc.
Prod. No. Size Units/Case
4580 12 fl. oz. aerosol can 12
WHITE LITHIUM GREASE
A heavy-bodied, lithium based lubricant used to lubricate hinges, latches, window regulators, cables and other metal to metal contact parts. Heat resistant. Will not wash off. Will not run or drip.
Prod. No. Size Units/Case
4505 16 fl. oz. aerosol can 12
IES-2000 ANTI-SEIZE LUBRICANT
A special copper and graphite lubricant used to prevent seizing, galling, reduce friction and prevent corrosion. Withstands temperatures of 2000°F. Uses: brake parts, bolts, nuts, etc. Will not wash off. Excellent on frame machine bolts.
Prod. No. Size Units/Case
1470 8 fl. oz. brush top can 12
4570 16 fl. oz. aerosol can 12
DRY-TEF LUBE
A non-greasy, non-staining, clear, dry lubricant for most surfaces. Eliminates squeaking and chirping due to friction. Will not attract dust and dirt or stain fabric. No silicone - Body Shop safe!
Prod. No. Size Units/Case
4560 20 fl. oz. aerosol can 12
5 WAY LUBE CORROSION FIGHTER (CLEAR)
Designed for fast penetration and lubrication of rusted or corroded parts. Lubricates. Demoisturizes. Prevents rust. Safe on rubber, plastic and electrical parts. No silicone - Body Shop Safe! Clear. Meets government spec. MIL-C-23411.
Prod. No. Size Units/Case
4516 20 fl. oz. aerosol can 12
SLC SILICONE LUBRICATING COMPOUND
A transparent, heavy consistency silicone grease. reconditions rubber and vinyl. Can be used on: electrical connections as a dielectric grease, fan belts, rubber brake parts, o-rings, etc.
Prod. No. Size Units/Case
1412 8 fl. oz. brush top can 12
SILICONE SPRAY 100%
Lubricates, waterproofs and protects various surfaces. Stops squeaks and prevents weatherstrips and windows from sticking. Provides lubrication from -70°F to +400°F.
Prod. No. Size Units/Case
4504 16 fl. oz. aerosol can 12
BATTERY PROTECTOR & SEALER
Everybody knows that air and moisture combine to form corrosion on your battery terminals. Battery Protector & Sealer form IES seals and protects your terminals from that corrosion, which is a major cause of hard starting and battery failure. Prevents corrosion. Long-lasting protection. Seals terminals, cables and ignition systems. Extends battery life. Helps stop acid leaks around terminals.
Prod. No. Size Units/Case
4585 20 fl. oz. aerosol can 12
BATTERY CLEANER/LEAK DETECTOR/ACID NEUTRALIZER
Provides an easy way to remove power-sapping corrosion from all battery parts. This superior foaming cleaner will also detect acid leaking terminal joints and cracked cases (by changing color), which rob batteries of power and shorten battery life. Excellent clean-up and neutralizer for broken batteries in the body shop.
Prod. No. Size Units/Case
4586 16 fl. oz. aerosol can 12
2020
Prod No. Size Units/Case
4777 20 oz. size can 12
HQ PREMIUM GLASS CLEANER
This unique cleaner has been formulated to create a residue-free product that eliminates spots, film and streaks. may be used on any surface not harmed by water. Dissolves grease, oil, finger marks, smudges and soils on contact. Overspray dries crystal clear. Use on windows, mirrors, showcases, CRT screens, window film, fine lens, plexiglass, chrome, enamel, tile, porcelain, plastic, stainless steel, etc.
Prod. No. Size Units/Case
4538 20 fl. oz. aerosol can 12
ECONOMY GLASS CLEANER
Safe and easy to use cleaner that dissolves smudges, film, scum, smears, bugs and other soil. Non Ammoniated. Leaves no film. Leaves fresh, clean scent.
Prod. No. Size Units/Case
4511 20 fl. oz. aerosol can 12
SUPER FOAM HEAVY DUTY CLEANER
This concentrated butyl cleaner was formulated to clean hard to remove grease and soil which are normally unaffected by other cleaners. Its clinging foam permits long lasting contact with surfaces to be cleaned. Dissolves: wax, ink, oils, dyes, dirt, grease, road grime, and carbon.
Prod. No. Size Units/Case
4535 20 fl. oz. aerosol can 12
IES-303 SUPER WINDSHIELD WASHER TABLETS
IES-303 Windshield Washer Tablets are a super-concentrated formula. Non-toxic, biodegradable and engineered safe for rubber and paint. Each tablet makes up to one gallon of sparkling blue cleaner. NOTE: Not to be used in temperatures below 32°F without adding proper additives to keep from freezing. Super concentrated. Non-poisonous. Saves on freight costs and valuable space. Can work as a glass cleaner too!
Prod. No. Description Units/Case
9000 IES-303 Washer Tablets 25
9001 IES-303 Washer Tablets 50
9002 IES-303 Washer Tablets 100
PGC-123™ HAND CLEANER
PGC-123™ is a top of the line hand cleaner that removes the toughest paint, grease and grime in just 3 easy steps! A safe alternative to harsh solvents and thinners, PGC-123™ has a specially formulated fine pumice that is designed to remove even the toughest: Paints, Lacquers, Primers, Resins, Inks, Urethane Paints, Sealants, Adhesives, Grease/Grime and more!
PGC-123™ is non-toxic and biodegradable, containing no harsh mineral spirits or thinners - making it environmentally safe!
With a special mixture of Aloe Vera, Jojoba and Vitamin E, PGC-123™ helps condition your hands, and keep them conditioned, without that 'greasy' feel left behind with most hand cleaners.
Prod. No. Size Units/Case
1015 1 Gallon Jug w/pump 4
Cleaning AidsCleaning Aids www.internationalepoxies.comwww.internationalepoxies.com
2121
IES-1000 RESTORE-IT
A unique cleaner and protector that has been formulated to remove compound and white haze from textured plastic, door handles and fender flares. RESTORE-IT also leaves a long lasting dressing without silicone. Restores old faded mouldings and cladding.
Prod. No. Size Units/Case
1000 8 fl. oz. bottle 12
INTER-SHINERubber, Vinyl & Plastic Protectant/Conditioner
A convenient ready-to-use aerosol dressing that creates a high-gloss finish on rubber, plastic, vinyl and most other surfaces. It shines and protects against weathering, aging and ultra-violet rays without the use of silicone. Keeps rubber resilient an the harsh summer conditions. Restores rubber that is drying out, fading or cracking. Brightens exterior trim and remove wax deposits without harming painted surfaces.
Prod. No. Size Units/Case
4537 20 oz. aerosol can 12
Body Emblem/Mldg. TapeBody Emblem/Mldg. Tapewww.internationalepoxies.comwww.internationalepoxies.com
www.internationalepoxies.comwww.internationalepoxies.com
MTP-1 Moulding Tape Primer
MTP-1 Moulding Tape Primer is designed to work in conjunction with IES Conform Tape, Y2K Acrylic HIGH-BOND and INTER-MOUNT moulding tapes. Specifically designed to leave an acrylic polymer film (adhesion promoter) on the surface to achieve maximum adhesion of attachment tape to the moulding. Mouldings made out of PVC and other certain plastics (see Moulding Tape Application Chart inside of tape package) require use of MTP-1 Moulding Tape Primer to prevent expensive mouldings from falling off.
Prod. No. Size Units/Case
70778 8 oz. brush top can 12
Prod. No. Size Units/Case
70779 1/4” x 54 ft 4
70785 5/8” x 54 ft 4
70787 3/4” x 54 ft 4
70790 1” x 54 ft 4
70780 1/2” x 54 ft 4
Y2K Acrylic HIGH-BONDDouble Coated Moulding TapeSolid Acrylic Base / Acrylic AdhesiveInstant Bonding
U S E S : B o d y S i d e M o u l d i n g s , Accessories, Emblems, Interior Trim Panels, Garnish Mouldings and Rocker Panels.
OEM-APPROVED TAPE: GM Specification GM3802M Type 14 Chrysler Specification MS-CH59-C Ford Specification W58-M3G-138-B
Instant Pressure Sensitive Bonding.Solid Acrylic composition for clean cutting.Isolates and dampens vibration and shock.Maintains adhesion at sub-zero temperatures.Will not absorb moisture.Conforms to irregular substrates.Translucent - appears to be the color of the painted surface!
Use with #70778 MTP-1 Moulding Tape Primer for maximum performance.
Conform Tape PREMIUM DOUBLE SIDED ACRYLICFOAM TAPEAcrylic Foam / Acrylic AdhesiveRE-POSITIONAL
APPLICATIONS: Body Side Mouldings, Accessories, Emblems, Garnish Mouldings, Rocker Panel Mouldings,Interior Trim Panels.
Prod. No. Size Units/Case
70879 1/4” x 54 ft 4
70880 1/2” x 54 ft 4
70885 5/8” x 54 ft 4
70887 3/4” x 54 ft 4
70890 1” x 54 ft 4
High strength acrylic re-positional adhesive.Closed-cell acrylic foam for clean cutting.Isolates and dampens vibration and shock.Maintains adhesion at sub-zero temperatures.Conforms to irregular substrates.
Use with #70778 MTP-1 Moulding Tape Primer for maximum performance.
2222
INTER-MOUNTDouble Coated Urethane Foam TapeWhite
A high-strength urethane foam tape combined with a pressure sensitive acrylic adhesive on both sides to provide instant bonding and conform ability. Typical Applications: Body Side Mouldings, Interior Trim, Visors, Kick Panels, Ground Effects, Signs, Emblems, Mirrors, Cladding and more!
Prod. No. Size Units/Case
70987 1/8” x 3/4” wide x 100 ft. 4
Ideal For Mouldings With A Lip! Instant AdhesionAcrylic Adhesive Provides A Durable Bond Promotes Maximum Surface ContactAbsorbs Vibration Can Withstand The Effects Of Temperature-Induced
Expansion & Contraction
Using #70987 tape, gap is full.
BO
DSI
D
OUL
ING
/ LI
PY
EM
DW
Regular moulding tape will not fill the
gap.
LBO
DY
SID
E M
OULD
ING
W/
IP
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity. Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Use with #70778 MTP-1 Moulding Tape Primer for maximum performance.
HQ PREMIUM GLASS CLEANER
This unique cleaner has been formulated to create a residue-free product that eliminates spots, film and streaks. may be used on any surface not harmed by water. Dissolves grease, oil, finger marks, smudges and soils on contact. Overspray dries crystal clear. Use on windows, mirrors, showcases, CRT screens, window film, fine lens, plexiglass, chrome, enamel, tile, porcelain, plastic, stainless steel, etc.
Prod. No. Size Units/Case
4538 20 fl. oz. aerosol can 12
ECONOMY GLASS CLEANER
Safe and easy to use cleaner that dissolves smudges, film, scum, smears, bugs and other soil. Non Ammoniated. Leaves no film. Leaves fresh, clean scent.
Prod. No. Size Units/Case
4511 20 fl. oz. aerosol can 12
SUPER FOAM HEAVY DUTY CLEANER
This concentrated butyl cleaner was formulated to clean hard to remove grease and soil which are normally unaffected by other cleaners. Its clinging foam permits long lasting contact with surfaces to be cleaned. Dissolves: wax, ink, oils, dyes, dirt, grease, road grime, and carbon.
Prod. No. Size Units/Case
4535 20 fl. oz. aerosol can 12
IES-303 SUPER WINDSHIELD WASHER TABLETS
IES-303 Windshield Washer Tablets are a super-concentrated formula. Non-toxic, biodegradable and engineered safe for rubber and paint. Each tablet makes up to one gallon of sparkling blue cleaner. NOTE: Not to be used in temperatures below 32°F without adding proper additives to keep from freezing. Super concentrated. Non-poisonous. Saves on freight costs and valuable space. Can work as a glass cleaner too!
Prod. No. Description Units/Case
9000 IES-303 Washer Tablets 25
9001 IES-303 Washer Tablets 50
9002 IES-303 Washer Tablets 100
PGC-123™ HAND CLEANER
PGC-123™ is a top of the line hand cleaner that removes the toughest paint, grease and grime in just 3 easy steps! A safe alternative to harsh solvents and thinners, PGC-123™ has a specially formulated fine pumice that is designed to remove even the toughest: Paints, Lacquers, Primers, Resins, Inks, Urethane Paints, Sealants, Adhesives, Grease/Grime and more!
PGC-123™ is non-toxic and biodegradable, containing no harsh mineral spirits or thinners - making it environmentally safe!
With a special mixture of Aloe Vera, Jojoba and Vitamin E, PGC-123™ helps condition your hands, and keep them conditioned, without that 'greasy' feel left behind with most hand cleaners.
Prod. No. Size Units/Case
1015 1 Gallon Jug w/pump 4
Cleaning AidsCleaning Aids www.internationalepoxies.comwww.internationalepoxies.com
2121
IES-1000 RESTORE-IT
A unique cleaner and protector that has been formulated to remove compound and white haze from textured plastic, door handles and fender flares. RESTORE-IT also leaves a long lasting dressing without silicone. Restores old faded mouldings and cladding.
Prod. No. Size Units/Case
1000 8 fl. oz. bottle 12
INTER-SHINERubber, Vinyl & Plastic Protectant/Conditioner
A convenient ready-to-use aerosol dressing that creates a high-gloss finish on rubber, plastic, vinyl and most other surfaces. It shines and protects against weathering, aging and ultra-violet rays without the use of silicone. Keeps rubber resilient an the harsh summer conditions. Restores rubber that is drying out, fading or cracking. Brightens exterior trim and remove wax deposits without harming painted surfaces.
Prod. No. Size Units/Case
4537 20 oz. aerosol can 12
Body Emblem/Mldg. TapeBody Emblem/Mldg. Tapewww.internationalepoxies.comwww.internationalepoxies.com
www.internationalepoxies.comwww.internationalepoxies.com
MTP-1 Moulding Tape Primer
MTP-1 Moulding Tape Primer is designed to work in conjunction with IES Conform Tape, Y2K Acrylic HIGH-BOND and INTER-MOUNT moulding tapes. Specifically designed to leave an acrylic polymer film (adhesion promoter) on the surface to achieve maximum adhesion of attachment tape to the moulding. Mouldings made out of PVC and other certain plastics (see Moulding Tape Application Chart inside of tape package) require use of MTP-1 Moulding Tape Primer to prevent expensive mouldings from falling off.
Prod. No. Size Units/Case
70778 8 oz. brush top can 12
Prod. No. Size Units/Case
70779 1/4” x 54 ft 4
70785 5/8” x 54 ft 4
70787 3/4” x 54 ft 4
70790 1” x 54 ft 4
70780 1/2” x 54 ft 4
Y2K Acrylic HIGH-BONDDouble Coated Moulding TapeSolid Acrylic Base / Acrylic AdhesiveInstant Bonding
U S E S : B o d y S i d e M o u l d i n g s , Accessories, Emblems, Interior Trim Panels, Garnish Mouldings and Rocker Panels.
OEM-APPROVED TAPE: GM Specification GM3802M Type 14 Chrysler Specification MS-CH59-C Ford Specification W58-M3G-138-B
Instant Pressure Sensitive Bonding.Solid Acrylic composition for clean cutting.Isolates and dampens vibration and shock.Maintains adhesion at sub-zero temperatures.Will not absorb moisture.Conforms to irregular substrates.Translucent - appears to be the color of the painted surface!
Use with #70778 MTP-1 Moulding Tape Primer for maximum performance.
Conform Tape PREMIUM DOUBLE SIDED ACRYLICFOAM TAPEAcrylic Foam / Acrylic AdhesiveRE-POSITIONAL
APPLICATIONS: Body Side Mouldings, Accessories, Emblems, Garnish Mouldings, Rocker Panel Mouldings,Interior Trim Panels.
Prod. No. Size Units/Case
70879 1/4” x 54 ft 4
70880 1/2” x 54 ft 4
70885 5/8” x 54 ft 4
70887 3/4” x 54 ft 4
70890 1” x 54 ft 4
High strength acrylic re-positional adhesive.Closed-cell acrylic foam for clean cutting.Isolates and dampens vibration and shock.Maintains adhesion at sub-zero temperatures.Conforms to irregular substrates.
Use with #70778 MTP-1 Moulding Tape Primer for maximum performance.
2222
INTER-MOUNTDouble Coated Urethane Foam TapeWhite
A high-strength urethane foam tape combined with a pressure sensitive acrylic adhesive on both sides to provide instant bonding and conform ability. Typical Applications: Body Side Mouldings, Interior Trim, Visors, Kick Panels, Ground Effects, Signs, Emblems, Mirrors, Cladding and more!
Prod. No. Size Units/Case
70987 1/8” x 3/4” wide x 100 ft. 4
Ideal For Mouldings With A Lip! Instant AdhesionAcrylic Adhesive Provides A Durable Bond Promotes Maximum Surface ContactAbsorbs Vibration Can Withstand The Effects Of Temperature-Induced
Expansion & Contraction
Using #70987 tape, gap is full.
BO
DSI
D
OUL
ING
/ LI
PY
EM
DW
Regular moulding tape will not fill the
gap.
LBO
DY
SID
E M
OULD
ING
W/
IP
Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity. Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.Note: All times stated are approximate depending on temperature and humidity. All times are based on 70°F to 75°F at 50% relative humidity.
Use with #70778 MTP-1 Moulding Tape Primer for maximum performance.
Size Units/Case
5026 1/4” wide x 50 ft roll
5027 3/8” wide x 50 ft roll 1
5028 1/2” wide x 50 ft roll 1
1
Full Round
5023
5024
5025
Half Round
RUBBER CORD CLOSED CELL
Perfect for reinforcing weatherstrip.
Full Half
TOPPER CAP WEATHERSTRIP
A closed-cell vinyl foam weatherstrip developed to provide a seal between pick-up truck cabs and body side rails. One side has a permanent pressure sensitive adhesive, the other side has a polyester liner to protect against paint damage.
Prod. No. Size Units/Case
5250 1” wide x 30 ft roll 1
5255 1-1/2” wide x 30 ft roll 1Weatherstrip is 3/16”thick
WEATHERSTRIPPING ADHESIVE BACK
A medium density, closed cell, vinyl foam sponge weatherstrip with permanent acrylic adhesive. Temperature range -40°F to 200°F. One per box
WidthWidthSizeSize
5201
1/2”1/2”
5/8”5/8”
3/4”3/4”
1”1”
1/8” x 75 ft1/8” x 75 ftPart No.Part No.
1/4” x 35 ft1/4” x 35 ftPart No.Part No.
3/8” x 30 ft3/8” x 30 ftPart No.Part No.
1/2” x 25 ft1/2” x 25 ftPart No.Part No.
5206 5211 5216
5202 5207 5212 5217
5203 5208 5213 5218
5204 5209 5214 5219
5205 5210 5215 5220
3/8”3/8”
Misc. TapeMisc. Tape www.internationalepoxies.comwww.internationalepoxies.com
SNOT-ON-A-ROLL Tape is 2 mil thick
SKNOT-ON-A-ROLL Acrylic Transfer Adhesive
This labor saving product is used primarily for reattaching nameplates and emblems. this adhesive eliminates the need to remove the old tape off the back of emblems and nameplates. Also saves time in trimming.
Prod. No. Size Units/Case
70710 1/2” wide x 108 ft roll 4
70715 3/4” wide x 108 ft roll 4
WATER-PROOF CLOTH TAPE (Black)
A high quality, strong cloth backed tape. Designed for long life applications. Provides excellent protection to autobody parts when sanding, grinding or sandblasting nearby. Moisture resistant and has instant adhesion.
Prod. No. Size Units/Case
70530 2” wide x 60 yds 1
FIBERGLASS BODY REPAIR TAPE
A fiberglass mesh tape with a high-tack adhesive on one side for easy positioning. Used with epoxy repair compounds to give additional strength and support.
Prod. No. Size Units/Case
70528 1-7/8” wide x 150 ft roll 1
70535 6” wide x 75 ft roll 1
ALUMINUM FOIL BODY REPAIR TAPE
Ideal for reinforcing parts to be repaired when using epoxy repair compounds. Special "high-tack" adhesive.
Prod. No. Size Units/Case
70525 2” wide x 50 ft roll 1
INTER-FUSE AMALGAMATING TAPE
A self-fusing cold shrink tape. Seals out moisture and insulates. Requires no heat. For insulating electrical, pipe, automotive and marine repairs. Insulates up to 430 volts.
Prod. No. Size Units/Case
70560 3/4” wide x 30 ft 1
70559 1” wide x 11 ft 6
A/C INSULATION TAPE (Cork-Rubber)
This tape eliminates sweating, condensation and dripping of refrigeration lines. Insulates A/C components to prevent dripping and ice buildup. Also improves A/C efficiency. Tape is 1/8” thick.
Prod. No. Size Units/Case
70595 2” wide x 30 ft 1
WeatherstripWeatherstrip
2323
Drill BitsDrill Bitswww.internationalepoxies.comwww.internationalepoxies.com
1/8" DOUBLE ENDED DRILL BITSMADE IN THE USA
Made of high speed steel for superb durability. 135° Split Point prevents the bit from walking. Long life. Will not break under normal use.
12000 1/8” Diameter 12
12000-144 1/8” Diameter 144
Prod. No. Size Units/Pkg
SUPER COBALT Spot Weld Cutting BitsMADE IN THE USA
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super Cobalt steel. Performs best at low RPM. Cuts extremely fast.
6.5mm (1/4”) Diameter
8mm (5/16”) Diameter
10mm (3/8”) Diameter
Size
12070
12030
12035
Pkg/1
12071
12031
12036
Pkg/5
12072
12033
12038
Pkg/10
12073
12032
12037
Pkg/25
Also available: #222400 Cobalt Assortment(includes 5-8mm bits and 5-10mm bits).
8mm x 1.69” 12026 12027 12029
8mm x 1.49”
Size
12046
Pkg/1
12047
Pkg/5
12049
Pkg/25
COBALT SPOTWELD REPLACEMENT BITSMADE IN THE USA
A very popular replacement bit for some pneumatic spot weld removal tools. Top quality.
The 1.49” has a .44 Flat On Shank.The 1.69” has a .75 Flat On Shank.
8mm (5/16”) Diameter
10mm (3/8”) Diameter
Size
12086
12096
Pkg/1
12085
12095
Pkg/5
12080
12090
Pkg/10
12087
12097
Pkg/25
SUPER M7 High Speed Spot Weld Cutting BitsMADE IN THE USA
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super M7 High Speed steel. Performs best at low RPM. Cuts extremely fast.
2424
Prod. No. Size Units/Case
12020 1230g Tin Can
IES BORON BUSTER
Extends the life of drill bits and saw blades. Reduces friction and heat on cutting edge for longer tool life and better finish. For use when drilling or cutting Boron & Hi Strength Steel.
Prod. No. Size Units/Case
222401 1Drill Bit Assortment
IES DRILL BIT ASSORTMENT
A popular drill bit assortment containing the following:
6 - 12000 1/8” Double Ended Drill Bit1 - 12025 Step Point Drill Bitt 1 - 12086 8mm (5/16”) Super M7 Spot Weld Bit1 - 12096 10mm (3/8”) Super M7 Spot Weld Bit1 - 12070 6.5mm (1/4”) Super Cobalt Spot Weld Bit2 - 12030 8mm (5/16”) Super Cobalt Spot Weld Bit1 - 12035 10mm (3/8”) Super Cobalt Spot Weld Bit
Prod. No. Size Units/Case
12025 1Step Point Drill Bit
STEP POINT DRILL BIT
A High Speed Steel. Drills holes 1/8” - 1/2” in 1/32” Increments.13 Different Sizes.Self-Starting Point.Automatically deburrs holes with next cutting edge.
Made in North America or England
Size Units/Case
5026 1/4” wide x 50 ft roll
5027 3/8” wide x 50 ft roll 1
5028 1/2” wide x 50 ft roll 1
1
Full Round
5023
5024
5025
Half Round
RUBBER CORD CLOSED CELL
Perfect for reinforcing weatherstrip.
Full Half
TOPPER CAP WEATHERSTRIP
A closed-cell vinyl foam weatherstrip developed to provide a seal between pick-up truck cabs and body side rails. One side has a permanent pressure sensitive adhesive, the other side has a polyester liner to protect against paint damage.
Prod. No. Size Units/Case
5250 1” wide x 30 ft roll 1
5255 1-1/2” wide x 30 ft roll 1Weatherstrip is 3/16”thick
WEATHERSTRIPPING ADHESIVE BACK
A medium density, closed cell, vinyl foam sponge weatherstrip with permanent acrylic adhesive. Temperature range -40°F to 200°F. One per box
WidthWidthSizeSize
5201
1/2”1/2”
5/8”5/8”
3/4”3/4”
1”1”
1/8” x 75 ft1/8” x 75 ftPart No.Part No.
1/4” x 35 ft1/4” x 35 ftPart No.Part No.
3/8” x 30 ft3/8” x 30 ftPart No.Part No.
1/2” x 25 ft1/2” x 25 ftPart No.Part No.
5206 5211 5216
5202 5207 5212 5217
5203 5208 5213 5218
5204 5209 5214 5219
5205 5210 5215 5220
3/8”3/8”
Misc. TapeMisc. Tape www.internationalepoxies.comwww.internationalepoxies.com
SNOT-ON-A-ROLL Tape is 2 mil thick
SKNOT-ON-A-ROLL Acrylic Transfer Adhesive
This labor saving product is used primarily for reattaching nameplates and emblems. this adhesive eliminates the need to remove the old tape off the back of emblems and nameplates. Also saves time in trimming.
Prod. No. Size Units/Case
70710 1/2” wide x 108 ft roll 4
70715 3/4” wide x 108 ft roll 4
WATER-PROOF CLOTH TAPE (Black)
A high quality, strong cloth backed tape. Designed for long life applications. Provides excellent protection to autobody parts when sanding, grinding or sandblasting nearby. Moisture resistant and has instant adhesion.
Prod. No. Size Units/Case
70530 2” wide x 60 yds 1
FIBERGLASS BODY REPAIR TAPE
A fiberglass mesh tape with a high-tack adhesive on one side for easy positioning. Used with epoxy repair compounds to give additional strength and support.
Prod. No. Size Units/Case
70528 1-7/8” wide x 150 ft roll 1
70535 6” wide x 75 ft roll 1
ALUMINUM FOIL BODY REPAIR TAPE
Ideal for reinforcing parts to be repaired when using epoxy repair compounds. Special "high-tack" adhesive.
Prod. No. Size Units/Case
70525 2” wide x 50 ft roll 1
INTER-FUSE AMALGAMATING TAPE
A self-fusing cold shrink tape. Seals out moisture and insulates. Requires no heat. For insulating electrical, pipe, automotive and marine repairs. Insulates up to 430 volts.
Prod. No. Size Units/Case
70560 3/4” wide x 30 ft 1
70559 1” wide x 11 ft 6
A/C INSULATION TAPE (Cork-Rubber)
This tape eliminates sweating, condensation and dripping of refrigeration lines. Insulates A/C components to prevent dripping and ice buildup. Also improves A/C efficiency. Tape is 1/8” thick.
Prod. No. Size Units/Case
70595 2” wide x 30 ft 1
WeatherstripWeatherstrip
2323
Drill BitsDrill Bitswww.internationalepoxies.comwww.internationalepoxies.com
1/8" DOUBLE ENDED DRILL BITSMADE IN THE USA
Made of high speed steel for superb durability. 135° Split Point prevents the bit from walking. Long life. Will not break under normal use.
12000 1/8” Diameter 12
12000-144 1/8” Diameter 144
Prod. No. Size Units/Pkg
SUPER COBALT Spot Weld Cutting BitsMADE IN THE USA
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super Cobalt steel. Performs best at low RPM. Cuts extremely fast.
6.5mm (1/4”) Diameter
8mm (5/16”) Diameter
10mm (3/8”) Diameter
Size
12070
12030
12035
Pkg/1
12071
12031
12036
Pkg/5
12072
12033
12038
Pkg/10
12073
12032
12037
Pkg/25
Also available: #222400 Cobalt Assortment(includes 5-8mm bits and 5-10mm bits).
8mm x 1.69” 12026 12027 12029
8mm x 1.49”
Size
12046
Pkg/1
12047
Pkg/5
12049
Pkg/25
COBALT SPOTWELD REPLACEMENT BITSMADE IN THE USA
A very popular replacement bit for some pneumatic spot weld removal tools. Top quality.
The 1.49” has a .44 Flat On Shank.The 1.69” has a .75 Flat On Shank.
8mm (5/16”) Diameter
10mm (3/8”) Diameter
Size
12086
12096
Pkg/1
12085
12095
Pkg/5
12080
12090
Pkg/10
12087
12097
Pkg/25
SUPER M7 High Speed Spot Weld Cutting BitsMADE IN THE USA
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super M7 High Speed steel. Performs best at low RPM. Cuts extremely fast.
2424
Prod. No. Size Units/Case
12020 1230g Tin Can
IES BORON BUSTER
Extends the life of drill bits and saw blades. Reduces friction and heat on cutting edge for longer tool life and better finish. For use when drilling or cutting Boron & Hi Strength Steel.
Prod. No. Size Units/Case
222401 1Drill Bit Assortment
IES DRILL BIT ASSORTMENT
A popular drill bit assortment containing the following:
6 - 12000 1/8” Double Ended Drill Bit1 - 12025 Step Point Drill Bitt 1 - 12086 8mm (5/16”) Super M7 Spot Weld Bit1 - 12096 10mm (3/8”) Super M7 Spot Weld Bit1 - 12070 6.5mm (1/4”) Super Cobalt Spot Weld Bit2 - 12030 8mm (5/16”) Super Cobalt Spot Weld Bit1 - 12035 10mm (3/8”) Super Cobalt Spot Weld Bit
Prod. No. Size Units/Case
12025 1Step Point Drill Bit
STEP POINT DRILL BIT
A High Speed Steel. Drills holes 1/8” - 1/2” in 1/32” Increments.13 Different Sizes.Self-Starting Point.Automatically deburrs holes with next cutting edge.
Made in North America or England
®MANDRELS FOR TRIM-KUT ABRASIVE DISCS
Prod. No. Description Units/Case
7070 1/4” Mandrel 1
7073 7/16-20 Mandrel 1
HAND SCUFF PADS
A non-woven synthetic fibre, coated with abrasive and bonded together with a special abrasive system.
Maroon - Medium, for scuffingGrey - Fine. for final sanding
Prod. No. Description Units/Case
7180 Maroon-Medium 20
7185 Grey-Fine 20
WELD GRINDING WHEELS
Externally reinforced cutting and grinding wheel. For notching, bending, freehand cutting in hard to reach areas. Also for grinding down spot welds. For use in automotive, aerospace industries and plant maintenance. Reinforced to resist lateral pressure. Long lasting, high quality.
Maximum operating speed for this 3” disc is 20,300 RPM
APPLICATIONS
Diameter: 3” Stainless SteelCenter Hole: 3/8” Ferrous MetalsThickness: 1/4”
Prod. No. Description Units/Case
7002 3” x 1/4” x 3/8”
7002-50 3” x 1/4” x 3/8” 50
7001 Arbor (1/4” Shank) 1
5
®TRIM-KUT ABRASIVE DISCS®The Trim-Kut Abrasive Disc is a versatile
tool used for grinding, sanding, cleaning and general surface preparation in Autobody Repair. It can be used for rust/paint removal, leveling welded seams and MIG-weld residue removal.
®Trim-Kut Abrasive Discs are a unique one-piece design, with the grinding surface bonded to a hard copolymer backing. It is a highly durable grinding unit that will not fly off during use and eliminates the need for additional backing pads. The disc can be trimmed when the outside edge has been sufficiently “loaded” to the point where it is not grinding effectively. By simply placing the back of the disc against a sharp edge or
object, and with activation of the electric/air tool, the “loaded” portion on the outside edge can be removed from the rest of the disc creating a new edge ready for
®use. Trim-Kut Abrasive Discs can be trimmed in such a manner right up to the mandrel.
®Each box of 25 Trim-Kut Abrasive Discs comes with 1 mandrel.
Prod. No. Description Units/Case
7050 3” 120 grit (Green) 25
7055 3” 60 grit (Orange) 25
7060 3” 36 grit (Red) 25
Maximum operating speed for a 3” Disc is 21,000 RPMMaximum operating speed for a 5” Disc is 12,000 RPM
7065 3” 24 grit (Black) 25
7085 5” 36 grit 25
7090 5” 24 grit 25
Rear view images.
ZIRCONIUM CUT-OFF WHEELS
A special blend of zirconium grain is used to avoid overheating, glazing and discoloration. Used for finishing applications, smooth cutting and burr-free finish. Easily cuts sheet metal, tubes, pipes, etc. Fast cutting. Long lasting, high quality.
Maximum operating speed: 3” disc - 25,000 RPM
4” disc - 19,000 RPM
APPLICATIONS
Diameter: 3” Stainless SteelCenter Hole: 3/8” Hard Ferrous MetalsThickness: 1/32” (.035) and 1/16” Ferrous Metals
Prod. No. Description Units/Case
6999 3” x 1/32” x 3/8” 10
6999-100 3” x 1/32” x 3/8” 100
7000 3” x 1/16” x 3/8” 10
7000-100 3” x 1/16” x 3/8” 100
7004-50 4” x 1/16” x 3/8” 50
7004 4” x 1/16” x 3/8” 5
7001 Arbor (1/4” Shank) 1
AbrasivesAbrasives www.internationalepoxies.comwww.internationalepoxies.com
2525
MiscellaneousMiscellaneouswww.internationalepoxies.comwww.internationalepoxies.com
SUPERASER™ ABRASIVE WHEEL KIT
Innovative material to remove double faced tape from the back side of mouldings. Also excellent for removing decals and pin striping. Long lasting, lasts 2 to 3 times longer than competitive cheaper wheels. Will not leave a sticky adhesive residue.
Prod. No. Description Units/Case
7043 2 Wheels, 1 Mandrel Kit 1
SPARK / WELDING BLANKET
For light to medium duty welding. Protects fabric, glass, trim and painted surfaces from sparks.
1000°F Constant Heat100% Fiberglass YarnAbrasion Resistant
Prod. No. Description Units/Case
70506 5 ft. x 6 ft.
70508 5 ft. x 8 ft. 1
70510 5 ft. x 10 ft. 1
1
SLAG BUSTER WELDING BLANKET
Made from a carbon fibre fabric that withstands intermittent temperatures to 3000°F. Protects from sparks and small slag. 100% flame resistant. heat and tear resistant. Soft. Lightweight. Non-abrasive, will not scratch clearcoats.
70580 5 ft. x 6 ft. 8 in. 1
Prod. No. Size Units/Case
(60” x 80”, 1/4” thick)
PAINTERS HELPER™
A unique "Hour Glass Shaped" tool used with 1500 grit or 2000 grit sanding discs to remove paint runs and clearcoat runs. The sanding discs attach to the tool using the easy Hook & Loop fastening system. Works best in a twisting motion. Wet sand only.
Prod. No. Description Units/Case
7005 Hour Glass Holder
7006 1500 grit sanding disc 25
7007 2000 grit sanding disc 25
1
PATRIOT UTILITY KNIFE
Retractable blade. Button retracts blades to 3 positions. Lightweight die-cast construction. Replacement blades for Patriot Knife are heavy duty, two-notch blades.
Prod. No. Description Units/Case
97073 Patriot Utility Knife
97072 Replacement Blades 100
1
DELUXE HAND RAZOR SCRAPER
For use with single edge blades.
Prod. No. Description Units/Case
97071 Deluxe Scraper 1
PLASTIC PUTTY STICKS
These multi-purpose tools are molded from break-resistant, self-lubricating plastic. The #96111 is beveled to a chisel on one end that can also be used as a scraper. Can be used as: a putty knife, a paddle for backfilling windshields, a pry bar for removing and installing glass that's set in a rubber channel.
Prod. No. Description Units/Case
96110 Putty Stick
96111 Putty Stick w/chisel 6
6
C-TYPE SHIMS
These C-Type body shims work well in areas that require the shim to remain virtually unseen. Zinc plated steel.
3/8" slot, 7/8" O.D.
Prod. No. Description Units/Case
335285 1/16” thick
335286 1/16” thick 250
335287 1/16” thick 500
50
335290 1/8” thick
335291 1/8” thick 250
335292 1/8” thick 500
50
NYLON CABLE TIE ANCHOR
Multiple use. For 1/4” Dia. holes. Accepts up to 5/16” width cable ties. Black.
Prod. No. Description Units/Case
58022 Black Cable Tie Anchor 25
NYLON CABLE TIE ANCHOR
Multiple use. For 1/4” Dia. holes. Accepts up to 3/16” width cable ties. White
Prod. No. Description Units/Case
58020 White Cable Tie Anchor 25
INDUSTRIAL SINGLE EDGE BLADES
Fabricated from surgical steel and are made specifically for auto trim, glass and autobody applications.
The Single Faceted blades provide durability for more abusive applications. Single honed blades.
The Double Faceted blades provide exceptional sharpness for those hard to cut applications. Double honed blades.
2626
Prod. No. Description Units/Case
97070 Double Faceted Blades 100
97070-50 Double Faceted Blades 5000
Prod. No. Description Units/Case
97069 Single Faceted Blades 100
97069-50 Single Faceted Blades 5000
®MANDRELS FOR TRIM-KUT ABRASIVE DISCS
Prod. No. Description Units/Case
7070 1/4” Mandrel 1
7073 7/16-20 Mandrel 1
HAND SCUFF PADS
A non-woven synthetic fibre, coated with abrasive and bonded together with a special abrasive system.
Maroon - Medium, for scuffingGrey - Fine. for final sanding
Prod. No. Description Units/Case
7180 Maroon-Medium 20
7185 Grey-Fine 20
WELD GRINDING WHEELS
Externally reinforced cutting and grinding wheel. For notching, bending, freehand cutting in hard to reach areas. Also for grinding down spot welds. For use in automotive, aerospace industries and plant maintenance. Reinforced to resist lateral pressure. Long lasting, high quality.
Maximum operating speed for this 3” disc is 20,300 RPM
APPLICATIONS
Diameter: 3” Stainless SteelCenter Hole: 3/8” Ferrous MetalsThickness: 1/4”
Prod. No. Description Units/Case
7002 3” x 1/4” x 3/8”
7002-50 3” x 1/4” x 3/8” 50
7001 Arbor (1/4” Shank) 1
5
®TRIM-KUT ABRASIVE DISCS®The Trim-Kut Abrasive Disc is a versatile
tool used for grinding, sanding, cleaning and general surface preparation in Autobody Repair. It can be used for rust/paint removal, leveling welded seams and MIG-weld residue removal.
®Trim-Kut Abrasive Discs are a unique one-piece design, with the grinding surface bonded to a hard copolymer backing. It is a highly durable grinding unit that will not fly off during use and eliminates the need for additional backing pads. The disc can be trimmed when the outside edge has been sufficiently “loaded” to the point where it is not grinding effectively. By simply placing the back of the disc against a sharp edge or
object, and with activation of the electric/air tool, the “loaded” portion on the outside edge can be removed from the rest of the disc creating a new edge ready for
®use. Trim-Kut Abrasive Discs can be trimmed in such a manner right up to the mandrel.
®Each box of 25 Trim-Kut Abrasive Discs comes with 1 mandrel.
Prod. No. Description Units/Case
7050 3” 120 grit (Green) 25
7055 3” 60 grit (Orange) 25
7060 3” 36 grit (Red) 25
Maximum operating speed for a 3” Disc is 21,000 RPMMaximum operating speed for a 5” Disc is 12,000 RPM
7065 3” 24 grit (Black) 25
7085 5” 36 grit 25
7090 5” 24 grit 25
Rear view images.
ZIRCONIUM CUT-OFF WHEELS
A special blend of zirconium grain is used to avoid overheating, glazing and discoloration. Used for finishing applications, smooth cutting and burr-free finish. Easily cuts sheet metal, tubes, pipes, etc. Fast cutting. Long lasting, high quality.
Maximum operating speed: 3” disc - 25,000 RPM
4” disc - 19,000 RPM
APPLICATIONS
Diameter: 3” Stainless SteelCenter Hole: 3/8” Hard Ferrous MetalsThickness: 1/32” (.035) and 1/16” Ferrous Metals
Prod. No. Description Units/Case
6999 3” x 1/32” x 3/8” 10
6999-100 3” x 1/32” x 3/8” 100
7000 3” x 1/16” x 3/8” 10
7000-100 3” x 1/16” x 3/8” 100
7004-50 4” x 1/16” x 3/8” 50
7004 4” x 1/16” x 3/8” 5
7001 Arbor (1/4” Shank) 1
AbrasivesAbrasives www.internationalepoxies.comwww.internationalepoxies.com
2525
MiscellaneousMiscellaneouswww.internationalepoxies.comwww.internationalepoxies.com
SUPERASER™ ABRASIVE WHEEL KIT
Innovative material to remove double faced tape from the back side of mouldings. Also excellent for removing decals and pin striping. Long lasting, lasts 2 to 3 times longer than competitive cheaper wheels. Will not leave a sticky adhesive residue.
Prod. No. Description Units/Case
7043 2 Wheels, 1 Mandrel Kit 1
SPARK / WELDING BLANKET
For light to medium duty welding. Protects fabric, glass, trim and painted surfaces from sparks.
1000°F Constant Heat100% Fiberglass YarnAbrasion Resistant
Prod. No. Description Units/Case
70506 5 ft. x 6 ft.
70508 5 ft. x 8 ft. 1
70510 5 ft. x 10 ft. 1
1
SLAG BUSTER WELDING BLANKET
Made from a carbon fibre fabric that withstands intermittent temperatures to 3000°F. Protects from sparks and small slag. 100% flame resistant. heat and tear resistant. Soft. Lightweight. Non-abrasive, will not scratch clearcoats.
70580 5 ft. x 6 ft. 8 in. 1
Prod. No. Size Units/Case
(60” x 80”, 1/4” thick)
PAINTERS HELPER™
A unique "Hour Glass Shaped" tool used with 1500 grit or 2000 grit sanding discs to remove paint runs and clearcoat runs. The sanding discs attach to the tool using the easy Hook & Loop fastening system. Works best in a twisting motion. Wet sand only.
Prod. No. Description Units/Case
7005 Hour Glass Holder
7006 1500 grit sanding disc 25
7007 2000 grit sanding disc 25
1
PATRIOT UTILITY KNIFE
Retractable blade. Button retracts blades to 3 positions. Lightweight die-cast construction. Replacement blades for Patriot Knife are heavy duty, two-notch blades.
Prod. No. Description Units/Case
97073 Patriot Utility Knife
97072 Replacement Blades 100
1
DELUXE HAND RAZOR SCRAPER
For use with single edge blades.
Prod. No. Description Units/Case
97071 Deluxe Scraper 1
PLASTIC PUTTY STICKS
These multi-purpose tools are molded from break-resistant, self-lubricating plastic. The #96111 is beveled to a chisel on one end that can also be used as a scraper. Can be used as: a putty knife, a paddle for backfilling windshields, a pry bar for removing and installing glass that's set in a rubber channel.
Prod. No. Description Units/Case
96110 Putty Stick
96111 Putty Stick w/chisel 6
6
C-TYPE SHIMS
These C-Type body shims work well in areas that require the shim to remain virtually unseen. Zinc plated steel.
3/8" slot, 7/8" O.D.
Prod. No. Description Units/Case
335285 1/16” thick
335286 1/16” thick 250
335287 1/16” thick 500
50
335290 1/8” thick
335291 1/8” thick 250
335292 1/8” thick 500
50
NYLON CABLE TIE ANCHOR
Multiple use. For 1/4” Dia. holes. Accepts up to 5/16” width cable ties. Black.
Prod. No. Description Units/Case
58022 Black Cable Tie Anchor 25
NYLON CABLE TIE ANCHOR
Multiple use. For 1/4” Dia. holes. Accepts up to 3/16” width cable ties. White
Prod. No. Description Units/Case
58020 White Cable Tie Anchor 25
INDUSTRIAL SINGLE EDGE BLADES
Fabricated from surgical steel and are made specifically for auto trim, glass and autobody applications.
The Single Faceted blades provide durability for more abusive applications. Single honed blades.
The Double Faceted blades provide exceptional sharpness for those hard to cut applications. Double honed blades.
2626
Prod. No. Description Units/Case
97070 Double Faceted Blades 100
97070-50 Double Faceted Blades 5000
Prod. No. Description Units/Case
97069 Single Faceted Blades 100
97069-50 Single Faceted Blades 5000
EPOXY, INTER-MIX WALL RACK
A Convenient wall rack that can be put virtually anywhere. Heavy duty rack that can be used for your epoxies, sealers, tools and more.
Prod. No. Description Units/Case
99818 Epoxy Wall Rack 1
Features:
Tilt back design prevents product from falling out forward.
Powder coated for long lasting finish.
Holds up to 24 INTER-MIX cartridges (8 slots that hold up to 3 cartridges each).
Use as a stand alone rack or in conjunction with the #99817 Aerosol/Utility Cabinet.
AEROSOL & EPOXY CABINET
A heavy duty cabinet that can be used for aerosols, epoxies, sealers, tools and more.
Prod. No. Description Units/Case
99817 Aerosol/Epoxy Cabinet 1
Features:
Convenience. Store products and tools in a central location, near work areas.
Saves time and money. Reduces lost time searching for products or tools.
Inventory control. Locking double doors help secure materials to reduce “evaporation”. Also saves time when checking stock for inventory.
Quality. Powder coated for long lasting finish.
Custom configuration. Includes one fixed slotted shelf to store caulking products and two solid shelves to store other products or tools on. Both are adjustable with 8 different height positions. Will store up to 48 dual cartridge products and from 38-44 aerosol cans.
Configuration Example #1: Contains 1 adjustable shelf. Will hold up to 48 dual cartridges and 38 to 44 aerosol cans.
Configuration Example #2: Contains 2 adjustable shelves. Will hold up to 48 dual cartridges, several packages of mixing tips. 1 manual dual cartridge application gun, 1 air dual cartridge application gun and other small miscellaneous products.
2727
Cabinet/Wall RackCabinet/Wall Rack www.internationalepoxies.comwww.internationalepoxies.com
Prod. No. Description Units/Case
99819 Cabinet Legs for #99817 1 set
AEROSOL/EPOXY CABINET LEGS
A leg set for the #99817 Aerosol/Utility Cabinet. Allows the cabinet to be free standing. Blue powder coated.One set (4 legs) per box.
2828
NotesNoteswww.internationalepoxies.comwww.internationalepoxies.com
Manufacturer ofEpoxiesSealers
and Adhesives.
EPOXY, INTER-MIX WALL RACK
A Convenient wall rack that can be put virtually anywhere. Heavy duty rack that can be used for your epoxies, sealers, tools and more.
Prod. No. Description Units/Case
99818 Epoxy Wall Rack 1
Features:
Tilt back design prevents product from falling out forward.
Powder coated for long lasting finish.
Holds up to 24 INTER-MIX cartridges (8 slots that hold up to 3 cartridges each).
Use as a stand alone rack or in conjunction with the #99817 Aerosol/Utility Cabinet.
AEROSOL & EPOXY CABINET
A heavy duty cabinet that can be used for aerosols, epoxies, sealers, tools and more.
Prod. No. Description Units/Case
99817 Aerosol/Epoxy Cabinet 1
Features:
Convenience. Store products and tools in a central location, near work areas.
Saves time and money. Reduces lost time searching for products or tools.
Inventory control. Locking double doors help secure materials to reduce “evaporation”. Also saves time when checking stock for inventory.
Quality. Powder coated for long lasting finish.
Custom configuration. Includes one fixed slotted shelf to store caulking products and two solid shelves to store other products or tools on. Both are adjustable with 8 different height positions. Will store up to 48 dual cartridge products and from 38-44 aerosol cans.
Configuration Example #1: Contains 1 adjustable shelf. Will hold up to 48 dual cartridges and 38 to 44 aerosol cans.
Configuration Example #2: Contains 2 adjustable shelves. Will hold up to 48 dual cartridges, several packages of mixing tips. 1 manual dual cartridge application gun, 1 air dual cartridge application gun and other small miscellaneous products.
2727
Cabinet/Wall RackCabinet/Wall Rack www.internationalepoxies.comwww.internationalepoxies.com
Prod. No. Description Units/Case
99819 Cabinet Legs for #99817 1 set
AEROSOL/EPOXY CABINET LEGS
A leg set for the #99817 Aerosol/Utility Cabinet. Allows the cabinet to be free standing. Blue powder coated.One set (4 legs) per box.
2828
NotesNoteswww.internationalepoxies.comwww.internationalepoxies.com
Manufacturer ofEpoxiesSealers
and Adhesives.
Distributed By:
INTERNATIONAL EPOXIES & SEALERSP.O. Box 185
San Antonio, FL 33576
Toll Free Phone (800) 451-7206Toll Free Fax (866) 239-0328