i731-411 2006-2007 Moto Morini Corsaro 1200 - PCIII USB - 1

2006-2007 Moto Morini

Installation Instructions

Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com

Parts List1 Power Commander1 USB Cable1 CD-ROM1 Installation Guide1 Power Adapter2 Power Commander Decals2 Dynojet Decals2 Velcro® Strip1 Alcohol Swab

You can also download the PowerCommander software and latest mapsfrom our web site at:

www.powercommander.com

The ignition MUST be turnedOFF before installation!

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

Button Adjustment Display

Faceplate Buttons

USB PortExpansion Port

Corsaro 1200

1. Remove passenger and main seat

2. Remove battery cover and battery

3. Prop up the fuel tank

4. Locate the injector connector. (Fig. A)

5 Unscrew this connection.

6. Place the PC temporarily in thebattery trunk. (Fig.B)

7 Route the PCIII harness underneaththe subframe and go towards thethrottle bodies.

7 Route the PCIII harness underneaththe subframe and go towards thethrottle bodies (Fig. C).

Fig.

AFi

g. B

Fig.

C

i731-411 2006-2007 Moto Morini Corsaro 1200 - PCIII USB - 2

Loosen these bolts

PCII Iharness

8 Screw the PCIII harness into theconnection at the air box (Fig.D).

9 Screw the other end of the PCIII intothe stock wiring harness.

10 Attach the ground the wire from thePCIII to the negative side of thebattery.

11 Secure the PCIII under the batterycover using the supplied velcro.

12 Reinstall the battery cover and fueltank.

Fig.

D

i731-411 2006-2007 Moto Morini Corsaro 1200 - PCIII USB - 3

PCIII

Stock harness