2006-09 Ford Fusion Mercury Milan - scosche.com · Images Front Speaker Rear Tweeter Radio removal...
Transcript of 2006-09 Ford Fusion Mercury Milan - scosche.com · Images Front Speaker Rear Tweeter Radio removal...
+12V Constant = Blue/Red
+12v Acc. Switched = DATA
-12V Chassis Ground = Black/Blue
+12V Illumination = DATA
+12V Dimmer = DATA
Amp Remote = Yellow/Violet
LF+ = White
LF- = White/Brown
RF+ = White/Violet
RF- = White/Orange
LR+ = Brown/Green
LR- = Brown/Yellow
RR+= Brown/White
Dash Type: Double DINKit: FD1432ABHarness: FDSRAntenna Adapter: CRAB/CRARB
About the Vehicle
Make: FordModel: FusionYear: 2006-09
In Dash Application
Wire Color Codes
Speaker Notes
Front Speaker Sizes
Rear
Ford Fusion
RR- = Brown/Blue
NOTES
Speaker Sizes
Dimensions:
Dimensions: W= 4 7/8'' L= 6 3/4''D= 4 3/8''
NOTES
Rear Door : 6x8'' MidrangeRear Deck: 6x9'' in rear deck (w/Premium)Speaker Adapter: SA68Factory Assembly: (4) T-15 Torx screws securingspeaker.
OPTIONSMP3-compatible CD Audio controls on the steering wheelAudiophile 8 Speaker SystemIn-Dash 6 CD Changer
W= 4 7/8'' L= 6 3/4''D= 3 5/8''
Upper Door: 1'' TweeterLower Door: 6X8” MidrangeSpeaker Adapter: SA68Speaker Harness: TBAFactory Assembly: (4) T-15 Torx screws securingspeaker.
2006-09 Mercury Milan
Images
Front Speaker
Rear
Tweeter
Radio removal
Front Speaker
Rear Speaker
1. Unsnap tweeter pod from door using a PRT.Lift away disconnect and remove.
Tweeter Removal
1. Extract (2) T15 torx surrounding the perimeter of the door panel.2. Extract (1) 7mm hex screw located in the door handle pocket. Lift away disconnect and remove.3. Extract (1) T15 torx located in the doorhandle release cup.4. Using a PRT unsnap the perimeter of the door panel. Lift away disconnect and remove.5. Unsnap tweeter pod from door using a PRT.Lift away disconnect and remove.6. Extract (4) T15 torx securing factory speaker.Lift away disconnect and remove.
1. Extract (1) T15 torx surrounding the perimeter of the door panel.2. Extract (1) 7mm hex screw located in the door handle pocket. Lift away disconnect and remove.3. Extract (1) T15 torx located in the doorhandle release cup.4. Using a PRT unsnap the perimeter of the door panel. Lift away disconnect and remove.5. Extract (4) T15 torx securing factory speaker.Lift away disconnect and remove.
1. Using a panel removal tool remove the trimaround the radio.2. Remove the (4) 7mm screws holding the radio in place. Disconnect and remove
Radio
Ford Fusion2006-09 Mercury Milan