2003 Packer Service Tools Catalog

PACKERSERVICE TOOLS

1Table of Contents

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02Manufacturing or what are we putting here? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04Packer Application Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05

Retrievable Bridge Plugs

HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34DLT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36V-III Unloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38CSTH Storm Packer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40ECV Storm Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42ANC Storm Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4432A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46SC Unloader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48StradaSet II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Model B Perforation Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52B Rotational Unloader Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54ARM Selective Treating Packer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56TTV Tubing Tester Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Tubing Tester Valve (Flapper Type) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Casing Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Service Tools

WRP c/w Retrieving Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6TSU c/w Retrieving Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8BI & BII Cup type Bridge Plug c/w Retrieving Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

FracGuard Bridge Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12FracGuard Frac Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14FracGuard 2 Frac Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16FracGuard Convertible Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18BRS Bit Release Sub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20238 DB - 10 Bridge Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22958 DB - 8 BridgePlug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24HM-1 Bridge Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26HM-2 Bridge Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28PCR Cement Retainer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30238 CR Cement Retainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Bridge Plugs and Cement Retainers

Retrievable Service Packers

The products in this catalog may be covered by one or more United States and/or InternationalPatents. Please address all inquiries concerning Intellectual Property to:

Weatherford International - Legal Department515 Post Oak Blvd., Suite 600Houston, Texas 77027 USATel.: +1-713-693-4000Fax.: +1-713-621-0994

2Introduction

Weatherford International Ltd. is one of the largest global providers of innovativemechanical solutions, technology and services for the drilling and production sectors ofthe oil and gas industry. Weatherford has been in business for more than 55 years and isknown for the quality of its products, customer service, safety and commitment todeveloping our people.

Headquartered in Houston, Weatherford employs more than 15,000 people worldwide,operating out of 440 locations in approximately 100 countries. The company markets itstechnologies and services through three divisions: Drilling & Intervention, CompletionSystems and Artificial Lift Systems.

Breadth of Completion ProductsWeatherford Completion Systems is the world's third-largest completion company. Wecombine Weatherford's tradition of superior service and the most developed globalinfrastructure in the business with a comprehensive range of integrated completion systemsfor cased and open-hole applications.

We are new technologies ranging from our revolutionary, world-record-setting expandable technologies to our new range of subsurface safety valves. Wealso continue to expand our product offerings with product line extensions such as packersfor high-end applications and proven liners systems for deepwater and extended reachsituations. Other strengths include:

continuously introducing

A Full Range ofCompletion

Products andServices

!

!

!

!

!

!

!

!

Packers

Liners

Inflatable Packers

Safety Valves

ExpandableTechnology

Conventional SandScreens

InterventionlessCompletion Products

Intelligent Wells

3Industry-Leading Testing, R&D and Training Facilities

Enhanced Manufacturing Facilities

Engineering Depth

Weatherford has two of the industry's largest R&D, testing and training facilities in the world.Our Houston-based Technology and Training Facility houses the world's most advancedsafety valve engineering lab and three hot cells that simulate downhole conditions,including temperatures of up to 500 F. Our Downhole Technology Ltd. (DTL) in Aberdeen isEurope's foremost research, testing and development center for offshore well services. Itincludes two fully operational drilling rigs, test bore holes, Well Intervention Center; andRigTrain, the market leader in providing high-quality education training and services

Weatherford Completion Systems has 15 certified manufacturing facilities locatedin the United States, Canada, South America, Europe and Asia. In the year 2002 alone, wedoubled our manufacturing capacity by adding new facilities, expanding existing ones andspending millions of dollars on the latest CNC machine equipment. Additionally, all of ouremployees involved in manufacturing are trained in internal apprenticeship programs andexternal programs as well to ensure the highest level of quality control.

Weatherford Completion Systems product engineering resources are based around theworld in 14 locations. We also employ more than 280 engineers, designers and technicalsupport staff whose breadth and depth of experience ranges from mechanical and electricalengineering to highly specialized disciplines of optical scientists and metallurgists.

HPHT

API/ISO

QHS&E

Weatherford providespremium qualityproducts and serviceswithout compromisingthe health and safety ofits workforce or itscustomers. Committedto protecting theintegrity of all itsresources, Weatherfordstrictly complies with allsafety andenvironmental laws andregulations. Health andsafety is a top priority,company-wide policythat is strictly enforced.Weatherford alsocontinually seeks andadopts environmentallyresponsible workpractices, services andmaterials to promote asafe andenvironmentallyresponsible workenvironment.

4Weatherfords Packer Systems

Weatherford has more than 40 years ofexperience in providing packer systems andcompletion accessories for a wide range ofdownhole conditions. From mechanical,hydraulic, wireline, multistring and feed-through packers to permanent andretrievable sealbore packers, Weatherfordoffers breadth and depth of in our packerproduct line, sound engineering,comprehensive testing and dedication toquality.

Our packers have been proven indemanding applications around the world,including deepwater North Sea, Gulf ofMexico, Asia Pacific and the Middle East.We continue to develop new product tomeet the present and future needs of ourcustomers, especially in high pressure/hightemperature environments.

5Packer Application Matrix

WIRELINESET

HYDRAULICSET

MECHANICAL,TUBING SET

SEAL BORE MONOBORELARGE UPPER

BORETHERMAL

Single String Retreivable Packers ArrowSet IX ArrowSet IX WildCat ArrowTherm

Seal Bore Retrievable Packers BlackCat BlackCat H BlackCat BlackCat BlackCat U BlackCat Thermal

Hydraulic Set Single String Retrievable Packers Hydrow I WildCat

Hydraulic Set Multistring Retrievable Packers Hydrow II

Permanent Packers UltraPak UltraPak H UltraPak UltraPak HH UltraPak U

Gravel Pack Packers BlackCat GP BlackCat GP BlackCat GP BlackCat Thermal

Service Packers DLT

Straddle Tools StradaSet

Retrievable Bridge Plugs WRP TS-U, B, BII

Permanent Bridge Plugs DB DB

Composite Bridge Plugs FracGuard

Cement Retainers PCR PCR

Weatherford products and services are subject to Weatherfords standard terms andconditions. For more information concerning the full line of Weatherford products andservices, please contact your authorized Weatherford representative. Unless notedotherwise, trademarks and service marks noted herein are the property of Weatherford.6

2002. Weatherford. All rights reserved.

WRP Bridge PlugThe Weatherford WRP Bridge Plug is a wireline-set, retrievable plug capableof holding differential pressure from above or below. The WRP may be set onconventional wireline or hydraulic packer-setting tools, such as the HSTsetting tool. Short design is easy to retrieve on tubing, coil tubing, or sandline,using the appropriate retrieval tool. When the retrieval tool engages the top ofthe bridge plug, the equalizing valve opens before the bridge plug is released,preventing the bridge plug from moving with differential pressure.

Features

Benefits

Applications

!!!!!!!!

!!!!!

!!!!

Wireline-, hydraulic- or coiled tubing-setCaged bi-directional slipsEqualizing valve opens before plug is releasedStraight-pull releaseOvershot washes to gage ring for easy retrievalRotational safety-release mechanismOptional sandline or coiled tubing retrievalSwab-resistant packing element system

Carbide slips are standard for long life and durabilityCompact design for tight doglegs, short lubricatorsSimple, rig-friendly operationHolds pressure from above and belowEasy, dependable retrieval

Acidizing, fracturing, and cementingCasing-pressure testingWellhead repair or replacementZonal isolation




WRP Bridge Plug

OD Weight Min. I.D. Max ID Max OD

in/mm Lbs./ft. in/mm in/mm in/mm2.922 2.922 2.78174.22 74.22 70.642.992 3.068 2.86776.00 77.93 72.82

4-1/2 3.920 4.000 3.771114.3 99.57 101.60 95.78

4.250 4.408 4.125107.95 111.96 104.784.408 4.560 4.250

111.96 115.82 107.954.408 4.560 4.250

111.96 115.82 107.954.625 4.777 4.500

117.48 121.34 114.304.778 4.950 4.641

121.36 125.73 117.884.950 5.190 4.781

125.73 131.83 121.445.675 5.920 5.484

144.15 150.37 139.295.938 6.135 5.812

150.83 155.83 147.625.830 5.937 5.656

148.08 150.80 143.665.938 6.135 5.812

150.83 155.83 147.626.136 6.276 5.968

155.85 159.41 151.596.276 6.366 6.078

159.41 161.70 154.386.456 6.578 6.266

163.98 167.08 159.165.579 6.797 6.453

141.71 172.64 163.916.798 7.025 6.672

172.67 178.44 169.477.025 7.125 6.812

178.44 180.98 173.027.511 7.625 7.312

190.78 193.68 185.727.725 7.921 7.531

196.22 201.19 191.298.017 8.191 7.781

203.63 208.05 197.648.343 8.681 8.218

211.91 220.50 208.748.681 8.835 8.437

220.50 224.41 214.308.836 9.063 8.593

224.43 230.20 218.26

6-5/8168.3 17-20

26-29

23-26

51WRP.1003

32-35

47WRP.1013

47WRP.101520-24

44-49 49WRP.1001

9.5-13.5

Base ProductNumber

43WRP.1001

26

11.5-15

43WRP.1007

43WRP.1007

15-18

45WRP.1003

47WRP.1001

45WRP.1001

43WRP.1003

47WRP.1009

51WRP.1001

47WRP.1007

45WRP.1005

47WRP.1003

45WRP.1009

47WRP.1003

47WRP.1005

49WRP.1003

20-28

51WRP.1005

47WRP.1011

24-29.7

33.7-39

49WRP.1005

32-40

47-53.5

40-47

29.3-36

Bridge Plug

10.2 35WRP.1002

7.7-9.2 35WRP.1001

Casing

7177.8

20-23

15.5-20

13-15.5

5-1/2139.7

17-20

24-32

38

9-5/8244.5

3-1/288.9

5127.0

8-5/8219.1

7-5/8193.7



TS-U Retrievable Bridge PlugThe Weatherford TS-U Retrievable Bridge Plug is a high-pressure packerstyle bridge plug used for multiple selective zone treating and testingoperations. The TS-U bridge plug is a superior field proven design. The TS-Ubridge plug is designed to set in tension or compression, which makes it idealfor shallow applications to test wellhead or for deep, high pressureapplications. The plug is designed with a large internal by-pass to preventswabbing when running and retrieving. The by-pass closes during the settingof the plug and opens prior to releasing the upper slips to equalize pressurewhen unsetting.

Features

Benefits

Applications

!!!!!

!!!!!

!!!!!!

Field-proven superior designLeft-hand rotation releases setting tool from plugStandard packing element system rated at 275 FOptional elastomers available for hostile environmentsPatented upper releasing system

right hand turn to set and right hand turn to releaseLarge internal by-passPressure equalizes prior to releasing upper slipsCan be set shallow or deepUtilizes a spring loaded retrieving tool

Temporary zonal isolationShallow set to test wellheadDeep high pressure testingSqueeze cementingFracturingMulti selective zone treating and testing operations




OD W eight Min. I.D. Max ID Tool OD

in/mm Lbs./ft. in/mm in/mm in/mm3.920 4.090 3.75099.57 103.89 95.254.408 4.560 4.280

111.96 115.82 108.714.156 4.276 4.000

105.56 108.61 101.604.670 4.778 4.500

118.62 121.36 114.304.778 5.004 4.625

121.36 127.10 117.485.675 5.921 5.500

144.15 150.39 139.706.276 6.456 5.969

159.41 163.98 151.616.875 7.025 6.672

174.63 178.44 169.476.625 6.765 6.453

168.28 171.83 163.917.725 8.017 7.531

196.22 203.63 191.298.535 8.835 8.250

216.79 224.41 209.55

7177.8

7-5/8193.7

8-5/8219.19-5/8244.5

5127.0

4-1/2114.3

5-1/2139.7

6-5/8168.3

577-75-000

577-76-000

577-85-000

577-95-000

577-56-000

577-55-000

577-65-000

577-70-000

577-45-000

RetrievingTool

Bridge Plug

20-23

725-45-00C9.5-13.5

Casing

Base ProductNumber

577-50-000

577-50-000

13-20

725-56-000PREM

11.5-15

725-55-00C

18-20.8 725-52-006

725-51-005

24-32 725-66-013

20-26 725-70-00C

24-29.7 725-75-003P

33.7-39 725-76-000

40-53.5 725-95-005

28-40 725-85-000

TS-U Retrievable Bridge Plug



B & BII Retrievable BridgePlugsThe Weatherford B and BII Retrievable Bridge Plugs are used toselectively isolate zones for acidizing, fracturing, squeeze cementing, ortesting in shallow applications. The B and BII plugs are also aninexpensive way to temporarily plug a well for installation or removal ofwellhead equipment. The controlled bypass allows the plugs to be run andretrieved without danger of swabbing. Pressure from above or below theplug is used to set the slips and anchor the plug.

The BII bridge plug is identical to the B bridge plug in operation, but it hasthe added feature of enclosed slips for easy entry into liners.

Both the B and BII bridge plugs are available with a sealer ball catcher toprevent problems during plug retrieval.

Features

Benefits

Applications

!!!!!

!!!!

!!!!

Large bypass areaTubing or sandline retrievalAvailable with sealer ball catchersEnclosed slips on BII plug provide for easy liner entryOptional right-hand or left-hand retrieving tool

Holds pressure differential from above or belowReduces danger of swabbing while running and retrievingMay be run with a service packer for straddling zonesStraight pull to retrieve

Acidizing, fracturing, squeeze cementing, and testing applicationsTemporary abandonmentsGeneral purpose service workDeviated wells or liners

B BII




B & BII Retrievable Bridge Plugs

O.D. WeightMin.I.D.

Max.I.D.

Max.O.D.

in./mm Lbs./ft. in/mm in/mm in/mm3.920 4.090 3.75099.57 103.89 95.254.156 4.276 4.000

105.56 108.61 101.604.276 4.494 4.125

108.61 114.15 104.784.670 4.778 4.500

118.62 121.36 114.304.778 4.892 4.625

121.36 124.26 117.484.892 5.012 4.750

124.26 127.30 120.654.892 4.950 4.625

124.26 125.73 117.485.791 5.921 5.575

147.09 150.39 141.616.184 6.276 5.875

157.07 159.41 149.236.366 6.538 5.875

161.70 166.07 149.236.625 7.025 6.500

168.28 178.44 165.107.725 7.825 7.500

196.22 198.76 190.508.535 8.755 8.250

216.79 222.38 209.559.560 10.050 9.313

242.82 255.27 236.5512.347 12.715 12.000313.61 322.96 304.80

9-5/8244.4810-3/4273.0513-3/8339.73

5127.00

5-1/2139.70

6-5/8168.28

7177.80

7-5/8193.688-5/8

219.08

24 - 29 710-75-000

28 - 40 710-85-000

715-55-000

N/A

715-70-000

26 - 29 710-72-000 N/A

17 - 23 N/A

710-52-000 715-52-00018 - 20.8

15.5 - 17 N/A 715-58-002

13 - 18 715-50-000710-50-000

14 - 17

Bridge PlugCasing

B Bridge Plug

9.5 - 13.5 N/A710-45-0004-1/2

114.30

B II Bridge Plug

24 - 29 710-65-000 715-65-000

20 - 23 N/A 715-57-002

17 - 20 N/A 715-58-000

710-55-000

N/A

43.5 - 53.5 710-95-000 N/A

54.5 - 72 710-07-000 N/A

40.5 - 65.7 710-10-000 N/A



FracGuard SeriesComposite Bridge Plug

TM

( BP6 and BP10 )The Weatherford FracGuard Series Composite Bridge Plug isolates zonesduring high-pressure stimulation. The composite body and componentconstruction of the plug allows rapid drillout with common workover-type bits.The lightweight cuttings produced lift easily and do not pile up on plugs belowwhen used in multiple-plug applications.

FracGuard composite bridge plugs are available in standard and high-pressure/high-temperature (HPHT) versions. The BP6 standard bridge plug israted to 6,000 psi differential pressure from above and below at temperaturesup to 250F. The Bp10 HPHT version is rated to 10,000 psi differentialpressure from above and below at temperatures up to 300F.

Both the standard and the HPHT bridge plugs can be run on tubing, drillpipe,coiled tubing, or wireline using conventional bridge-plug setting equipment.

Holds full differential pressure from above and belowBeveled bottom prevents body from spinning, thus decreasing drillout time

Allows multiple plugs to be run to isolate a series of zonesSaves time by allowing quick drillout with conventional tri-cone or junk-millbitsLightweight cuttings lift easily and minimize plugging of surface equipmentAllows underbalanced drillout of multiple plugs, which protects sensitiveformations

Single or multiple-zone stimulationVertical, deviated, horizontal, or multilateral wellboresUnderbalanced, multiple-zone completionsTemporary well plugging

Features

Benefits

Applications

!!

!!

!!

!!!!

Bridge Plugs & Cement Retainers



FracGuard Series Composite Bridge PlugTM

OD Weight Min. I.D. Max ID Max OD Part No.

in/mm Lbs./ft. in/mm in/mm in/mm3-1/2 2.750 2.750 2.56088.9 69.85 69.85 65.02

3.920 4.090 3.66099.57 103.89 92.963.754 3.826 3.59595.35 97.18 91.31

5-1/2 4.670 4.950 4.370139.7 118.62 125.73 111.00

7 6.094 6.456 5.800177.8 154.79 163.98 147.32

* 12,000 psi rating available upon request. Contact your Weatherford representative.**10,000 psi rating from above, 8,000 psi rating from below

CBP-55-PLUG10K*10000

4-1/2114.3

300

300

9.5-13.5

CBP-46-PLUG10K

Tubing / Casing

TemperatureRating F

Pressure Ratingpsi

30015.5-23

*10000

*10000

Composite Bridge Plug

CBP-36-PLUG10K12.95

20-32 300 8,000 CBP-70-PLUG8K

300 ** 10,000

CBP-45-PLUG10K

15.1-16.6



FracGuard SeriesComposite Frac Plug

TM

( FP6 and FP10 )The Weatherford FracGuard Series Composite Frac Plug isolates a lowerzone from an upper zone undergoing a high-pressure stimulation. The integralcheck ball holds differential pressure from above, but allows flowback frombelow the plug.

FracGuard composite frac plugs are available in standard and high-pressure/high-temperature (HPHT) versions. The FP6 standard frac plug israted to 6,000 psi differential pressure from above at temperatures up to250F. The FP10 HPHT version is rated to 10,000 psi differential pressurefrom above at temperatures up to 300F.

Both the standard and the HPHT frac plugs can be run on tubing, drillpipe,coiled tubing, or wireline using conventional frac-plug setting equipment..

Features

Benefits

Applications

!

!!

!!

!

!!!

Holds full differential pressure from above and allows flow through themandrel from belowBeveled bottom prevents body from spinning, thus decreasing drillout timeBall is pinned in place in the plug to eliminate possible seating problemsassociated with floating balls

Multiple plugs may be run to isolate a series of zonesSaves time by allowing quick drillout with conventional tri-cone or junk-millbitsLightweight cuttings lift easily and minimize plugging of surface equipment

Single or multiple-zone stimulationVertical, deviated, horizontal, or multilateral wellboresUnderbalanced, multiple-zone completions




FracGuard Series Composite Frac PlugTM

OD Weight Min. I.D. Max ID Max OD Part No.


3.920 4.090 3.66099.57 103.89 92.963.754 3.826 3.59595.35 97.18 91.31

5-1/2 4.670 4.950 4.370139.7 118.62 125.73 111.00

7 6.094 6.456 5.800177.8 154.79 163.98 147.32

* 12,000 psi rating available upon request. Contact your Weatherford representative.

CBP-55-FRAC10K*10000

4-1/2114.3

300

300

9.5-13.5

CBP-46-FRAC10K

Tubing / Casing

TemperatureRating F

Pressure Ratingpsi

30015.5-23

*10000

*10000

Composite Frac Plug

CBP-36-FRAC10K12.95

20-32 300 8,000 CBP-70-FRACG8K

300 10,000

CBP-45-FRAC10K

15.1-16.6



FracGuard 2 SeriesComposite Frac Plug

TM

The Weatherford FracGuard 2 Series Composite Frac Plug isolates a lowerzone from an upper zone undergoing a high-pressure stimulation. The floatingcheck ball holds differential pressure from above, but allows flowback frombelow the plug.

FracGuard 2 composite frac plug has a pressure rating of 10,000 psi at300F. The plug utilizes a 2.125 diameter phenolic frac ball with a specificgravity of 3.6 located on top of the frac plug.

The Weatherford FracGuard 2 frac plug can be run on tubing, drillpipe,coiled tubing, or wireline using conventional frac-plug setting equipment.

Features

Benefits

Applications

!

!!

!!

!!

!!!

Holds full differential pressure from above and allows flow through themandrel from belowBeveled bottom prevents body from spinning, thus decreasing drillout timeBall is pinned in place in the plug to eliminate possible seating problemsassociated with floating balls

Multiple plugs may be run to isolate a series of zonesSaves time by allowing quick drillout with conventional tri-cone or junk-millbitsLightweight cuttings lift easily and minimize plugging of surface equipmentAvailable in sizes for 3-1/2 in. tubing and 4-1/2 in. through 7 in. casing





FracGuard 2 Series Composite Frac PlugTM

O.D. WeightMin.I.D.

MaxI.D.

MaxO.D.

in/mm Lbs./ft. in/mm in/mm in/mm4-1/2 3.920 4.090 3.660

114.30 99.57 103.89 92.96

Part No.

300 10,000

Casing

TemperatureRating F

Pressure Ratingpsi

Composite Frac Plug

CBP-45-FRACFB10K9.5 - 13.5



FracGuard Series CompositePlug Convertible 6KBridge/Frac Plug

TM

In the image of the successful FracGuard 10,000 psi Composite Plug comesthe FracGuard 6,000 psi Convertible 6K Composite Plug series. An enhanceddesign that is shorter than the 10K model, it also has less metallic material in theslips. This means faster drillup times. Fabricated from mostly non-metallicmaterial, the plug design provides a variety of mills and bits that can be used inits removal.

This unique design of a removeable core allows the onsite tool-hand the ability toconvert the plug from a bridge plug to a frac plug within minutes. Onceconverted to a Frac Plug, the captured ball design permits the plug to be used ina variety of completion scenarios.

TM

TM

Features

Benefits

Applications

!

!!

!!!

!!!!!

!!!

Holds full differential pressure from above and allows flow through themandrel from below (Frac Plug design)Beveled bottom prevents body from spinning, decreasing drillout timeBall is pinned in place in the plug to eliminate possible seating problemsassociated with floating ballsReduced lengthReduced metallic material in slipsConvertible Bridge to Frac design

Multiple plugs may be run to isolate a series of zonesSaves time by allowing quick drillout with conventional tri-cone or junk-mill bitsLightweight cuttings lift easily and minimize plugging of surface equipmentReduced length means faster drillup timeOn site conversion gives more choices during the completion operation





FracGuard Series Composite Plug Convertible6K Bridge/Frac Plug

TM

O.D. WeightMin.I.D.

Max.I.D.

Max.O.D.

Length

in./mm Lbs./ft. in./mm in./mm in./mm in./mm4-1/2 3.920 4.090 3.665 31.340114.3 99.57 103.89 93.09 796.045-1/2 4.670 4.950 4.375 31.800139.7 118.62 125.73 111.13 807.72

9.5 - 13.5 250 6,000

PartNumber

CBP-55-PLUG6K6,000

Tubing / Casing

TemperatureRating F

Pressure Ratingpsi

25015.5 - 23

Composite Plug

CBP-45-PLUG6K



BRS Bit-Release SubThe Weatherford BRS Bit-Release Sub uses pump pressure to drop thedrillbit from the tubing string after the drillout run. This eliminates the need totrip out with drillbit and trip in with production string, saving rig time. Theoptional drillpipe float valve prevents wellbore fluids from entering the tubingstring.

Features

Benefits

Applications

!!!!!

!!!

!!!

!

Ball-drop disconnect uses pump pressure to release bitCannot release before actuationIdeal for flanged-up completionsStandard drillpipe float profileTorque, tensile, and compression ratings exceed those for productiontubingFull tubing ID after disconnectWireline entry profile on bottom of tubing stringFishing neck on lower sub simplifies bit retrieval

Saves rig time by eliminating tripsSaves money by eliminating work string rentalReliable and dependable design, as shown by the hundreds that havebeen run to date

Only a single trip is needed to clean out and flange up for production




in/mm in/mm in/mm2.000 1.500 0.7550.80 38.10 19.05

2-3/8" API REG 3.250 2.100 1.500 BRS202-7/8" API REG 82.55 53.34 38.10 BRS212-3/8" API REG 3.500 2.500 1.500 BRS252-7/8" API REG 88.90 63.50 38.10 BRS262-7/8" API REG 4.250 2.992 1R 1.625 BRS343-1/2" API REG 107.95 76.00 1F-2R 41.28 BRS35

* Alternate connections may be available on special order**After release of bit

Part No.

2-7/8" EUE 8RD

Max OD

1R

1R

Tubing Box Up Box DownMin ID**

3-1/2" EUE 8RD

Standard Connection* PhenolicBall Size

Float ValveSize

1.900" IJ 10 Rd 1R BRS194THD N-ROD

2-3/8" EUE 8 Rd

BRS Bit-Release Sub



238DB-10 Through 858DB-10Bridge PlugsPremium Cast Iron Bridge Plugs designed to run on electric line.

Premium Cast Iron Bridge Plug rated at 10,000 psi differential and 300 Ffrom above and below.

Features

Benefits

Applications

!!!!!

!!!!!!

!!!!

Field-proven designConstructed of drillable materialsStandard packing element rated at 300FOne-piece slipsTop set with shear stud

Rated at 10,000 PSI differential from above and below at 300 FRuns on existing electric line setting toolsSets in P-110 CasingHigher temperature packing elements available upon requestNo tension mandrel requiredRetaining rings to assist in preventing element extrusion

Well abandonmentTemporary and permanent zonal isolationSqueeze cementingFracturing




in. /mm lbs. in./mm Min. Max. lbs.

2-3/8 1.750 1.780 2.07460.3 44.45 45.21 52.682-7/8 2.220 2.340 2.52573.0 56.39 59.44 64.14

2.750 2.867 3.2583-1/2 69.85 72.82 82.7588.9 2.430 2.548 2.764

61.72 64.72 70.214 3.140 3.340 3.732

101.6 79.76 84.84 94.794-1/2 3.562 3.826 4.090114.3 90.47 97.18 103.89

5 3.937 4.154 4.560127.0 100.00 105.51 115.825-1/2 4.312 4.580 5.044139.7 109.52 116.33 128.125-3/4 4.699 4.890 5.290146.1 119.35 124.21 134.376-5/8 5.375 5.595 6.135168.3 136.53 142.11 155.83

7 5.687 6.000 6.538177.8 144.45 152.40 166.077-5/8 6.312 6.625 7.125193.7 160.32 168.28 180.988-5/8 7.125 7.310 8.097219.1 180.98 185.67 205.66

* Setting Force for GO/Owens 12,000 lbs

CASINGO.D.

T & CWEIGHT

PLUGO.D.

SETTINGRANGE in./mm

24-49 50,000 858DB10-00

17-35 50,000 700DB10-00

20-39 50,000 758DB10-00

14-25.2 33,000 575DB10-00

17-32 50,000 658DB10-00

11.5-20.8 33,000 500DB10-00

13-23 33,000 550DB10-00

400DB10-00

9.5-15.1 33,000 450DB10-00

5.6-14 20,000

6.4-6.5 *9,000 278DB10-00

12.8-15.8 *9,000

5.75-10.3 *9,000 350DB10-00

351DB10-00

PRODUCTNO.

238DB10-004-5.8 *9,000

SETFORCE

238DB-10 Through 858DB-10 Bridge Plugs



958DB-8 Through 2000DB-2Bridge PlugsPremium Cast Iron Bridge Plugs designed to run on electric line.

Premium Cast Iron Bridge Plug rated from 8,000 to 2,000 psi differential and300 F from above and below depending on the size of bridge plug

Features

Benefits

Applications

!!!!!

!!!!!

!!!!

Field-proven designConstructed of drillable materialsStandard packing element rated at 300FOne-piece slipsTop set with shear stud

Runs on existing electric line setting toolsSets in P-110 CasingHigher temperature packing elements available upon requestNo tension mandrel requiredRetaining rings to assist in preventing element extrusion

Well abandonmentTemporary and permanent zonal isolationSqueeze cementingFracturing




in./mm lbs. in./mm Min. Max. lbs.

9-5/8 8.125 8.435 9.063244.5 206.38 214.25 230.2010-3/4 9.437 9.660 10.192273.0 239.70 245.36 258.88

10.437 10.772 11.15011-3/4 265.10 273.61 283.21298.5 9.937 10.192 10.772

252.40 258.88 273.6113-3/8 11.880 12.175 12.175339.7 301.75 309.25 309.2516 14.125 14.576 15.250406.4 358.78 370.23 387.3520 18.375 18.730 19.124508.0 466.73 475.74 485.75

CASINGO.D.

T & CWEIGHT

PLUGO.D.

SETTINGRANGE in./mm

PRODUCTNO.

958DB-829.3-58.4 50,000

SET

32.7-60.7 50,000 1075DB-5

60-83 50,000

38-60 50,000 1175DB-4

1176DB-4

94-133 50,000 2000DB-2

1338DB-3

65-118 50,000 1600DB-2

48-84.5 50,000

958DB-8 Through 2000DB-2 Bridge Plugs



HM-1 Bridge PlugThe HM-1 permanent cast iron bridge plug is designed to set with acombination of hydraulic pressure and mechanical pull.

The HM-1 bridge plug requires a setting tool.

Features

Benefits

Applications

!!!!

!

!!!

!!!!!

Field-proven designConstructed of drillable materialsRight-hand rotation releases setting tool from plugOne-piece slips

One setting tool sets plugs for 4 -in. through 5 -in. casing by changingsetting sleevesSets with a combination of hydraulic pressure and mechanical pullExcellent for use in deviated applicationsAvailable in high pressure and low pressure on most sizes

Well abandonmentTemporary and permanent zonal isolationSqueeze cementingFracturingDeviated wellbores

SETTING TOOL




CASINGO.D.

T & CWEIGHT

PLUGO.D.

SURFACEPRESSURE

in./mm lbs. in./mm Min. Max. psi Min. Max.

3.562 3.826 4.0904 1/2 90.47 97.18 103.89114.3 3.562 3.826 4.090

90.47 97.18 103.895 3.937 4.154 4.560

127.0 100.00 105.51 115.824.312 4.580 5.044

5 1/2 109.52 116.33 128.12139.7 4.312 4.580 5.044

109.52 116.33 128.125 3/4" 4.699 4.890 5.290146.1 119.35 124.21 134.376 5/8 5.375 5.595 6.135168.3 136.53 142.11 155.83

5.687 6.000 6.5387 144.45 152.40 166.07

177.8 5.687 6.000 6.538144.45 152.40 166.07

7 5/8 6.312 6.625 7.125193.7 160.32 168.28 180.988 5/8 7.125 7.310 8.097219.1 180.98 185.67 205.669 5/8 8.175 8.435 9.063244.5 207.65 214.25 230.2010 3/4 9.437 9.660 10.192273.1 239.70 245.36 258.88

10.437 10.772 11.15011 3/4 265.10 273.61 283.21298.5 9.937 10.192 10.772

252.40 258.88 273.6113 3/8 11.880 12.175 12.175339.7 301.75 309.25 309.25

16 14.125 14.576 15.250406.4 358.78 370.23 387.35

20 18.375 18.730 19.124508.0 466.73 475.74 485.75

2000HM1-294-133 2,000 45,000 50,000

1338HM1-3

65-118 2,000 45,000 50,000 1600HM1-2

48-84.5 1,500 45,000 50,000

1175HM1-5

60-83 1,500 45,000 50,000 1176HM1-5

38-60 1,500 45,000 50,000

958HM1-8

32.7-60.7 1,500 45,000 50,000 1075HM1-5

29.3-58.4 1,500 45,000 50,000

758HM1-10

24-49 1,500 45,000 50,000 858HM1-10

20-39 1,500 45,000 50,000

700HM1-5

17-35 1,500 45,000 50,000 700HM1-10

17-35 1,500 45,000 50,000

575HM1-10

17-31 1,500 45,000 50,000 658HM1-10

14-25.2 1,500 30,000 33,000

550HM1-10

11.5 - 20.8 1,500 28,000 30,000 550HM1-10

13-23 1,500 28,000 30,000

28,000 30,000 4450HM1-10

13-23 1,500 28,000 30,000 550HM1-5

9.5 - 16.6 1,500

9.5-15.1 1,500

SETTING RANGEin./mm

PULL FORCE PRODUCTNO.

28,000 30,000 450HM1-5

HM-1 Bridge Plug



HM-2 Bridge PlugThe HM-2 Permanent Cast Iron Bridge Plug is designed especially for use inhigh-pressure situations.

The HM-2 bridge plug is designed to set with a combination of hydraulicpressure and mechanical pull and is designed with built in setting tool forgreater efficiency.

Features

Benefits

Applications

!!!!!

!!!!

!!!!!

Field-proven designConstructed of drillable materialsRight-hand rotation releases setting tool from plugStandard packing element rated at 300FOne-piece slips

Built-in setting toolSets with a combination of hydraulic pressure and mechanical pullExcellent for use in deviated applicationsThermal version available

Well abandonmentTemporary and permanent zonal isolationSqueeze cementingFracturingDeviated wellbores




CASINGO.D.

T & CWEIGHT

PLUGO.D.

SURFACEPRESSURE

in./mm lbs. in./mm Min. Max. psi Min. Max.

3 1/2 2.750 2.867 3.25888.9 69.85 72.82 82.75

4 3.190 3.340 3.732101.6 81.03 84.84 94.794 1/2 3.562 3.826 4.090114.3 90.47 97.18 103.89

5 3.937 4.154 4.560127.0 100.00 105.51 115.825 1/2 4.312 4.580 5.044139.7 109.52 116.33 128.125 3/4 4.699 4.890 5.290146.1 119.35 124.21 134.376 5/8 5.375 5.595 6.135168.3 136.53 142.11 155.83

7 5.687 6.000 6.538177.8 144.45 152.40 166.077 5/8 6.312 6.625 7.125193.7 160.32 168.28 180.988 5/8 7.125 7.310 8.097219.1 180.98 185.67 205.669 5/8 8.175 8.435 9.063244.5 207.65 214.25 230.2010 3/4 9.437 9.660 10.192273.1 239.70 245.36 258.88

10.437 10.772 11.15011 3/4 265.10 273.61 283.21298.5 60-83 9.937 10.192 10.772

252.40 258.88 273.6113 3/8 11.880 12.175 12.175339.7 301.75 309.25 309.25

1338HM2-3

1,400 45,000 50,000 1176HM2-5

48-84.5 1,400 45,000 50,000

45,000 50,000 1075HM2-5

38-60 1,400 45,000 50,000 1175HM2-5

SETTINGRANGE in.

PULL FORCE PRODUCTNO.

10,000 13,000 350HM2-105.75-10.3 1,400

32.7-60.7 1,400

9.5-15.1 1,400

14-25.2 1,400

17-35 1,400

28,000 30,000 450HM2-10

5.6-14 1,400 17,000 20,000 400HM2-10

500HM2-10

13-23 1,400 28,000 30,000 550HM2-10

11.5-20.8 1,400 28,000 30,000

30,000 33,000 575HM2-10

658HM2-10

45,000 50,000 700HM2-10

17-32 1,400 45,000 50,000

958HM2-8

20-39 1,400 45,000 50,000 758HM2-10

29.3-58.4 1,400 45,000 50,000

858HM2-1024-49 1,400 45,000 50,000

HM-2 Bridge Plug



PCR Cement RetainerThe PCR Cast Iron Drillable Cement Retainer's modular, field proven designmakes it a versatile tool in a variety of settings, especially in sensitive zones.

Features

Benefits

Applications

!!

!!

!!!!

!!!!

Modular, drillable designSimple, surface-controlled valve automatically closes to lock in thesqueeze pressure when the stinger is removedMechanical or wireline setComponents rotationally locked for easy drillout

Allows pressure-testing before squeezeValve protects sensitive zones in low-fluid wellsSimple conversion to bridge plug and from mechanical to wireline setFast drillout

AcidizingFracturingCementingWell abandonment




TOOLO.D. WEIGHT MIN. I.D. MAX. I.D. MAX. O.D.

in in in inmm mm mm mm4 1/2 3.826 4.09 3.593

114.30 97.18 103.89 96.265 4.276 4.56 3.937

127.00 108.61 115.82 100.005 1/2 4.67 5.044 4.312

139.70 118.62 128.12 109.526 5/8 5.575 6.135 5.375

168.28 144.61 155.83 136.537 5.72 6.094 5.375

177.80 145.29 154.79 136.537 6.004 6.538 5.688

177.80 152.50 166.07 144.487 5/8 6.625 7.125 6.312

193.68 168.28 180.98 160.328 5/8 7.435 8.097 7.125

224.48 188.85 205.66 180.989 5/8 8.375 9.063 8.125

224.48 212.73 230.22 206.3810 3/4 9.66 10.192 9.437273.05 245.36 258.88 239.7011 3/4 10.772 11.15 10.437298.45 273.61 283.21 265.1013 3/8 12.347 12.715 12339.73 313.61 322.96 304.80

16 14.438 15.25 14.125406.40 366.73 387.35 358.78

20 18.33 19.124 18.375508.00 475.74 485.74 166.72

CASINGBASE

PRODUCTNUMBER

43PCR

44PCR

lb/ft

9.5 - 15.1

11.5 - 18.0

45PCR

46PCR

47PCR

47PCR

48PCR

49PCR

51PCR

53PCR

54PCR

55PCR

57PCR

2000 CR-00

13.0 - 23.0

17.0 - 34.5

32.0 - 44.0

17.0 - 35.0

20.0 - 39.0

24.0 - 52.0

29.3 - 61.1

32.75 - 60.7

38.0 - 60.7

48.0 - 72.0

65.0 - 128.0

94.0 - 133.0

PCR Cement Retainer



238CR-400CR CementRetainerThe 238CR-400CR Cast Iron Drillable Cement Retainer is designed to holdpressure from one direction for sizes 2-3/8 inches through 4 inches.

Features

Benefits

Applications

!!!!!!

!!!!

!!

Modular, drillable designSimple, Spring loaded valve holds differential pressure from below onlyWireline setComponents rotationally locked for easy drilloutRetaining rings to assist in preventing element extrusionRated at 10,000 psi at 300 F

Valve protects sensitive zones in low-fluid wellsSimple conversion to bridge plug and from mechanical to wireline setFast drilloutSets in p-110 casing

CementingWell abandonment




CONNECTIONCONNECTION O.D.

in./mmSTINGER O.D.

in./mmSTINGER I.D.

in./mm

238CR-00.718

18.24 1.050 EU - 10 RD.1.75

44.45.71318.11

.3759.53

278CR-000.81220.63 1.050 EU - 10 RD

2.2256.39

.80720.50

.50012.70

350CR-000.81220.63 1.050 EU - 10 RD

2.2256.39 .807 20.5

.50012.70

400CR-000.81220.63 1.050 EU - 10 RD

2.2256.39 .807 20.5

.50012.70

SEAL STINGERCEMENTRETAINER

NO.

CEMENTRETAINER

I.D.(in./mm )

238CR-400CR Cement Retainer

in.mm MIN MAX (LBS)

1.7544.45

1.7845.21

2.07452.68 9,000 238CR-00

2.2256.39

2.3459.44

2.52564.14 9,000 278CR-00

2.7569.85

2.86772.82

3.25882.75 9,000 350CR-00

3.1479.76

3.3484.84

3.73294.79 20,000 400CR-00

PLUGO.D.

SETTING RANGE(in./mm )

SETFORCE PRODUCT

NO.



HD Compression-SetRetrievable Service PackerThe Weatherford HD Compression-Set Retrievable Service Packer isdesigned for general-purpose service work. The hydraulically operated upperhold-down buttons anchor the packer during high differential pressures frombelow. The packer's internal unloader allows circulation below the hold-downbuttons, making it easier to retrieve. Internal bypass provides circulationaround the tool and faster trip times with less swabbing. The HD can be run inconjunction with a mechanical-set bridge plug for straddling intervals.

Features

Benefits

Applications

!!!!!!

!!!

!!!!

Heavy-duty mandrel supports high hang-off weightsTubing connections are standard on full-bore mandrelQuarter-turn set, pickup unsetPressure-balanced mandrel hold-down counteracts pressure from belowAutomatic or manual jay mechanism availableCarbide slips and buttons available for long life

Large-diameter hold-down buttons reduce casing damageWide range of sizes availableSimple, rig-friendly operation

Testing and treating operationsGeneral-purpose service workSqueeze cementingCased-hole production testing




OD Weight Min. I.D. Max ID Max OD Min ID

in/mm Lbs./ft. in/mm in/mm in/mm in/mm4 3.476 3.548 3.313 1.500

101.6 88.29 90.12 84.15 38.104-1/2 3.920 4.090 3.750 1.875114.3 99.57 103.89 95.25 47.63

4.156 4.276 3.969 1.8755 105.56 108.61 100.81 47.63

127.0 4.276 4.560 4.125 1.875108.61 115.82 104.78 47.634.670 4.778 4.500 2.000

118.62 121.36 114.30 50.805-1/2 4.892 5.012 4.625 2.000139.7 124.26 127.30 117.48 50.80

4.892 5.012 4.625 2.375124.26 127.30 117.48 60.335.595 5.791 5.375 2.500

6-5/8 142.11 147.09 136.53 63.50168.3 5.675 5.921 5.500 2.500

144.15 150.39 139.70 63.506.004 6.184 5.875 2.500

152.50 157.07 149.23 63.507 6.094 6.276 5.954 2.500

177.8 154.79 159.41 151.23 63.506.276 6.538 6.188 2.500

159.41 166.07 157.18 63.506.625 6.765 6.453 2.500

7-5/8 168.28 171.83 163.91 63.50193.7 6.875 7.025 6.688 2.500

174.63 178.44 169.88 63.509-5/8 8.535 8.755 8.250 4.000244.5 216.79 222.38 209.55 101.60

Packer

Standard ThreadConnections

BaseProductNumber

9.5-11 1.900" EU 10 Rd 613-40

18-20.8

9.5-13.5

11.5-18

Casing

2-3/8" EUE 8 Rd 613-45

2-3/8" EUE 8 Rd 613-51

613-76

613-72

2-3/8" EUE 8 Rd

14-17 2-7/8" EUE 8 Rd

20-23 2-3/8" EUE 8 Rd

14-17 2-3/8" EUE 8 Rd

29-35

4-1/2" EUE 8 Rd 613-9543.5-53.5

17-26 2-7/8" EUE 8 Rd

24-29.7 2-7/8" EUE 8 Rd

33.7-39 2-7/8" EUE 8 Rd 613-75

613-50

26-32 2-7/8" EUE 8 Rd 613-70

2-7/8" EUE 8 Rd

613-58

613-71

613-57

24-32 2-7/8" EUE 8 Rd 613-65

613-55

28-35 2-7/8" EUE 8 Rd 613-67

HD Compression-Set Retrievable Service Packer



DLT Compression-Set ServicePackerThe Weatherford DLT Compression-Set Service Packer is designed for high-pressure, high-temperature service work. The hydraulically operated upperhold-down buttons anchor the packer during high differential pressures frombelow. The DLT includes positive rotational locks on all internal connections,allowing transmission of extreme torque through the packer. Backup rings onall O-rings provide reliable sealing at high temperature and pressure. Thepacker also comes with tool joint connections on extra-long top and bottomsubs for hydraulic tong makeup and breakout.

Features

Benefits

Applications

!!!!!!

!!!!

!!!

Heavy-duty mandrel supports high hang-off weightsBackup rings on O-rings seal for high pressure and temperatureTool joint connections are standardRotationally locked end connections for torque transmissionQuarter-turn set, pickup unsetStandard automatic jay mechanism

Large-diameter hold-down buttons reduce casing damageHigh-torque rating for manipulating heavy drillpipe into tight spotsWide range of sizes availableSimple, rig-friendly operation

High-pressure and high-temperature testing and treating operationsStorm packer applicationsDrillstem and production testing




DLT Compression-Set Service Packer

OD Weight Min. I.D. Max ID Max OD Min ID

in/mm Lbs./ft. in/mm in/mm in/mm in/mm3.696 3.826 3.593 1.750

4-1/2 93.88 97.18 91.26 44.45114.3 3.920 4.000 3.781 1.750

99.57 101.60 96.04 44.454.276 4.408 4.125 1.750

5 108.61 111.96 104.78 44.45127.0 4.408 4.560 4.250 1.750

111.96 115.82 107.95 44.454.670 4.892 4.500 1.750

5-1/2 118.62 124.26 114.30 44.45139.7 4.892 5.044 4.641 1.750

124.26 128.12 117.88 44.455.626 5.920 5.525 2.688

142.90 150.37 140.34 68.285.920 6.094 5.781 2.688

7 150.37 154.79 146.84 68.28177.8 6.094 6.276 5.954 2.688

154.79 159.41 151.23 68.286.366 6.538 6.188 2.688

161.70 166.07 157.18 68.286.625 6.765 6.453 2.688

7-5/8 168.28 171.83 163.91 68.28193.7 6.875 7.025 6.670 2.688

174.63 178.44 169.42 68.288.407 8.435 8.250 3.750

213.54 214.25 209.55 95.259-5/8 8.535 8.755 8.365 3.750244.5 216.79 222.38 212.47 95.25

8.755 9.001 8.584 3.750222.38 228.63 218.03 95.259.406 9.450 9.125 3.750

10-3/4 238.91 240.03 231.78 95.25273.1 9.760 9.850 9.500 3.750

247.90 250.19 241.30 95.2511-3/4 10.586 10.772 10.406 3.750298.5 268.88 273.61 264.31 95.2513-3/8 12.275 12.715 12.000 3.750339.7 311.79 322.96 304.80 95.25

688-50

26-32 3-1/2" I.F 688-73B

38-46.4 3-1/2" I.F

688-55

3-1/2" I.F 688-73C

688-73D

48-77 4-1/2" I.F. 688-13

60-71 4-1/2" I.F. 688-11B

688-10A

32.3-43.5 4-1/2" I.F. 688-96

71.1-73.2 4-1/2" I.F.

51-55.5 4-1/2" I.F.

4-1/2" I.F.

58.4-59.4 4-1/2" I.F.

688-10C

688-9543.5-53.5

17-23 3-1/2" I.F

24-29.7 3-1/2" I.F

33.7-39 3-1/2" I.F 688-75B

688-75A

688-94

688-73A

2-3/8" I.F.

13-17 2-3/8" I.F.

17-23 2-3/8" I.F.

32-38

2-3/8" I.F.

2-3/8" I.F.

688-45

2-3/8" I.F. 688-51

688-55B

15-18

11.6-13.5

11.5-15

Casing


15.1-17.7 688-46

BaseProductNumber

Packer



V-III Unloader ValveThe Weatherford V-III Unloader Valve is a high-pressure accessory tool for acompression-set service packer. The V-III allows pressure to equalize aboveand below the packer before the packer is unset, and permits fluid bypassduring running in or out of the hole. It can be locked in the open or closedposition by a quarter-turn of the pipe. The valve can be equipped with tooljoint connections, making it compatible with the DLT packer.

Features

Benefits

Applications

!!!!!!

!!!!!

!!

Can be locked in open or closed positionLarge bypass area for fluid circulationTool joint or tubing connections availableTop connection keyed to prevent torque overloadUnloader seals protected from fluid flow in open positionHigh-strength alloy steel construction

Torque rating compatible with DLT PackerHigh-pressure and high-temperature rating for severe serviceAllows high circulation ratesHigh hanging weight capacity for long tailpipe below packerSimple, rig-friendly operation

High-pressure and high-temperature testing and treating operationsDrillstem and production testing




V-III Unloader Valve

Size Max OD Min ID

in/mm in/mm in/mm

2-7/8 4.118 2.12573.0 104.60 53.983-1/2 5.500 2.68888.9 139.70 68.284-1/2 7.250 3.750114.3 184.15 95.25

3-1/2" I.F. 527-35-021

4-1/2" I.F. 527-45-021

60.3

2-7/8" EU 8RD

95.25 44.452-3/8

2-3/8" EU 8RD3.750 1.750

527-25-001

527-20-0212-3/8" I.F.


527-20-000

Base ProductNumber




CSTH Storm PackerThe Weatherford CSTH Storm Packer is a heavy-duty, three-quarter-turn,compression-set, retrievable service packer capable of holding differentialpressure from above or below. The packer has a heavy-wall mandrel with tooljoint connections that allow it to be set shallow, with the drillstring suspendedbelow. When run in conjunction with a back check valve system, the CSTHpacker secures the well during weather-related emergencies or wellheadrepair. The packer can also be used for conventional service work such asacidizing, fracturing, squeeze cementing, and casing tests.

Features

Benefits

Applications

!!!!!!!!

!!!!!

!

!!!!

Heavy-wall mandrel with tool joint connectionsHydraulic hold-down pistons for pressure from belowLarge bypass area for equalization and circulationCaged slips with carbide buttonsKeyed upper and lower connections for high-torque ratingThree-quarter turn to set; pick up to releaseBuilt-in bypass allows equalization and circulationRight- or left-hand set available

Easy to run and set, even on floating rigsMakes directly to drillpipe without crossoversHigh tailpipe rating for long drillstringsAllows high torque through mandrel without overloading connectionsCarbide buttons are standard on slips and hold-down buttons for long lifeand durabilityEasy and economical to redress

Shallow set with drillpipe suspended belowWeather-related emergencies or wellhead repairCased-hole DST or production testingSqueeze cementing or treating operations



CSTH Storm Packer

OD Weight Min. I.D. Max ID Max OD


5 4.408 4.560 4.125127.0 111.96 115.82 104.78

8.535 8.681 8.218216.79 220.50 208.74

9-5/8 8.681 8.835 8.437244.5 220.50 224.41 214.30

8.921 9.063 8.593226.59 230.20 218.269.660 9.760 9.375

245.36 247.90 238.139.850 10.192 9.625

250.19 258.88 244.4811-3/4 10.532 11.150 10.250298.5 267.51 283.21 260.35

11.899 12.275 11.62513-3/8 302.23 311.79 295.28339.7 12.347 12.715 12.125

313.61 322.96 307.9814.438 14.688 14.182

16 366.73 373.08 360.22406.4 15.010 15.396 14.755

381.25 391.06 374.78

5-1/2" I.F. 55CSTH.1002

38-73.6 4-1/2" I.F. 54CSTH.1001

53CSTH.1002

29.3-36 4-1/2" I.F. 51CSTH.1003

55.5-60.7 4-1/2" I.F.

51CSTH.1002

51CSTH.1001

40-47 4-1/2" I.F.

47-53.5 4-1/2" I.F.

2-3/8" I.F. 43CSTH.100115-18

9.5-13.5 2-3/8" I.F.

52.5-84 5-1/2" I.F. 57CSTH.1002

32.7-51 4-1/2" I.F. 53CSTH.1003

77-102 5-1/2" I.F. 55CSTH.1001

48-72

10-3/4273.1

Packer

109-128 5-1/2" I.F. 57CSTH.1001

Casing


Base ProductNumber

43CSTH.1002



ECV Storm ValveThe Weatherford ECV Storm Valve, which is run above the DLT Compression-Set Packer or the CSTH Storm Packer, provides a means to isolate the tubingbelow the packer and disconnect the running string. The ECV features a J-type overshot running tool, which is disconnected by quarter-turn rotation. Theisolation valve can be opened and closed repeatedly, independent of thedisconnect feature, allowing pressure testing before disconnecting from thepacker. The heavy-duty bearing assembly allows free valve operation with therunning string in compression, allowing easier operation on floating rigs. Therunning string may be reconnected and the valve opened to equalize pressurebefore packer retrieval. The Storm Valve features an expendable plug thatprovides through-bore access for circulation or wireline passage.

Features

Benefits

Applications

!!!!!!!

!!!!!

!!

Valve closes prior to disconnecting the running stringJ-type overshot disconnects with quarter turn of running stringHeavy-duty bearings allow valve operation while in compressionQuick-turn valve opens and closes with two turnsExpendable plug for through-bore accessRugged alloy-steel constructionTool-joint connections

Simple to operate, even on floating rigsPacker can be pressure-tested before disconnectingCompatible with compression packer operationDependable designEasy to redress

Weather-related emergenciesWellhead repair




ECV Storm Valve

CasingGage Ring

O.D.Min.I.D.

in./mm in./mm in./mm7 5.500 1.500

177.80 139.70 38.107-5/8 6.380 1.500

193.68 162.05 38.109-5/8 8.000 1.500

244.48 203.20 38.109-5/8 8.000 2.130

244.48 203.20 54.1011-3/4 10.250 2.130298.45 260.35 54.1013-3/8 11.500 2.130339.73 292.10 54.10

16 14.000 2.130406.40 355.60 54.10

Tool Size

406 4-1/2" IF PECV406000

340 4-1/2" IF PECV340000

4-1/2" IF PECV244000

298 4-1/2" IF PECV298000

178

194

243

244

PECV2430003-1/2" IF

3-1/2" IF PECV194000


Box x Pin

PECV178000

Base ProductNumber

3-1/2" IF



ANC Storm ValveThe Weatherford ANC Storm Valve, which is run above the DLT Compression-Set Packer or the CSTH Storm Packer, provides a means to isolate the tubingbelow the packer and disconnect the running string by 15 turns of left-handrotation. The running string can be reconnected and the valve opened toequalize pressure for packer retrieval. The Storm Valve features anexpendable plug that provides through-bore access for circulation or wirelinepassage.

Features

Benefits

Applications

!!!!!

!!!!

!!

Valve closes automatically when disconnecting the running stringValve equalizes automatically when reconnecting running stringExpendable plug for through-bore accessRugged alloy-steel constructionTool-joint connections

Simple to operateCompatible with compression packer operationDependable designEasy to redress

Weather-related emergenciesWellhead repair




ANC Storm Valve

ValveSize

Max.O.D.*

Min.I.D.

in./mm in./mm in./mm4-3/4 4.750 1.490

120.65 120.65 37.856.125 2.000

155.58 50.807.160 2.000

181.86 50.80* Tools listed without gage ring. Consult gage ring chart for options.

6-1/8155.58

682-20-0175-1/2" HT55-375

4-1/2" IF 682-20-016


682-10-015

Base ProductNumber

3-1/2" IF



32-A Tension Set PackerThe Weatherford 32-A Tension Set Packer is a tension set service tool, whichholds differential pressure from above and below. It is designed to run set,reset and retrieve easily even under adverse conditions. The 32-A tension setpacker is a rugged design that is the preferred tension set service tool in ourindustry today. Field proven for well over 40 years, it is a versatile and easy touse service packer for shallow applications. The 32-A also incorporates builtin safety features that allow retrieving of the tool in the event debris preventsnormal retrieving operations.

The 32-A is run with the Weatherford SC Unloader which allows circulation ofwell fluids through and around the tool during run in and to equalizetubing/annulus differential pressure to retrieve.

Features

Benefits

Applications

!!!!!

!!

!!!

!!!!

Bi-directional slips hold differential pressure from above and belowSimple rig friendly 1/3 turn at the tool to set and releaseFull openingInternal safety joint above J-pinsField proven design

Safety release allows circulation above the slipsRuns with Weatherford SC Unloader which allows circulation of well fluidsduring run-inAvailable in right or left hand setCan be run with Weatherford TS Bridge plug for testing and remedial workAvailable in sizes 2-7/8 through 13-3/8

Shallow testing and treating operationsGeneral-purpose service workSqueeze cementingCased-hole production testing




32-A Tension Set Packer

2-7/873.03

6.4 - 6.5 2.27557.79

2.46962.71

2.25057.15

0.75019.05

620-25-000 525-04-000

3.0088.90 7.7 - 10.2

2.99276.00

3.06877.93

2.78170.84

0.75019.05 620-30-000 525-04-000

4101.60

9.5 - 11.0 3.47688.29

3.54890.12

3.2582.55

1.62541.28

2-3/8" EU 8 RD 620-40-000 525-06-000

4-1/2114.30 15.1 - 16.6

3.75495.35

3.82697.18

3.59491.29

1.62541.28 2-3/8" EU 8 RD 620-41-000 525-06-000

4-1/2114.30

9.5 - 13.5 3.92099.57

4.090103.87

3.75095.25

2.00050.80

2-3/8" EU 8 RD 620-45-000 525-20-000

5127.00 11.5 - 15.0

4.408111.96

4.560115.83

4.125104.78

2.00050.80 2-3/8" EU 8 RD 620-50-000 525-20-000

5-1/227.63

14.0 - 17.0 4.892124.26

5.012127.30

4.625117.48

2.00050.80

2-3/8" EU 8 RD 620-55-000 525-20-000

5-1/227.63 20.0 - 23.0

4.67118.62

4.778121.36

4.500114.30

2.00050.80 2-3/8" EU 8 RD 620-57-000 525-20-000

6152.40

15.0 - 20.0 5.352135.94

5.524140.31

5.000127.00

2.00050.80

2-3/8" EU 8 RD 620-60-000 525-20-000

6-5/8168.28

24.0 - 28.0 5.791147.09

5.921150.39

5.500139.70

2.50063.50

2-7/8" EU 8 RD 620-65-000 525-25-000

7177.80

26.0 - 32.0 6.094154.79

6.276159.41

5.812147.62

2.50063.50

2-7/8" EU 8 RD 620-70-000 525-25-000

7177.80

17.0 - 23.0 6.366161.70

6.538166.07

6.200157.48

2.50063.50

2-7/8" EU 8 RD 620-72-000 525-25-000

7-5/8193.68

26.4 - 33.7 6.765171.83

6.969177.01

6.453163.91

2.50063.50

2-7/8" EU 8 RD 620-75-000 525-25-000

8-5/8219.08

24.0 - 40.0 7.725196.22

8.097205.66

7.500190.50

3.00076.20

3-1/2" EU 8 RD 620-85-000 525-35-000

9-5/8244.48

32.3 - 40.0 8.835224.41

9.001228.63

8.500215.90

3.00076.20

3-1/2" EU 8 RD 620-95-000 525-35-000

9-5/8244.48

43.5 - 53.5 8.535216.79

8.755222.38

8.250209.55

2.50063.50

2-7/8" EU 8 RD 620-96-000 525-25-000

10-3/4273.05

32.7 - 55.5 9.76247.90

10.192258.88

9.500241.30

4.000101.60

4-1/2" EU 8 RD 620-10-000 525-45-000

11-3/4298.45

42.0 - 60.0 10.772273.61

11.084281.53

10.500266.70

4.000101.60

4-1/2" EU 8 RD 620-11-000 525-45-000

13-3/8339.73 48.0 - 77.0

12.275311.79

12.715322.96

12.000304.80

4.000101.60 4-1/2" EU 8 RD 620-13-000 525-45-000

SC UnloaderP/N

1.050" EU 10 RD BOX1.250" EU 10 RD PIN

Max.O.D. OfPacker

(in./mm )

Min.I.D. OfPacker

(in./mm)

ThreadConnection

Box UpPin Down

ProductNumber

Casing

Size(in./mm )

Weight(lbs./ft.)

RecommendedCasing RangeMin.

(in./mm )Max.

(in./mm )




SC Tension Unloader ValveThe Weatherford SC Tension Unloader Valve is an accessory tool for atension-set service packer such as the T-32 Service Packer. The SC allowspressure to equalize above and below the packer before the packer is unset,and permits fluid bypass during running in or out of the hole, or when spottingtreating fluids. It locates in the open or closed position by a high-strengthcollet.

Features

Benefits

Applications

!!!!!!!!

!!!

!!!!

Opens by set-down weight; closes by upstrainUnloads pressure from either directionLarge bypass area for fluid circulationDetent in the open or closed positionBonded seal allows repeated openingProvides torque transmission for packer operationsHigh-strength alloy steel constructionUnloader seals protected from fluid flow in open position

Allows high circulation ratesSimple, rig-friendly operationNo rotation required to operate

Testing and treating operationsGeneral-purpose service workSqueeze cementingCased-hole production testing



SC Tension Unloader Valve

TubingOD

Max OD Min ID

in/mm in/mm in/mm1-1/4 2.250 0.75031.8 57.15 19.051-1/2 3.250 1.62538.1 82.55 41.282-3/8 3.750 2.00060.3 95.25 50.802-7/8 4.500 2.50073.0 114.30 63.503-1/2 5.469 3.00088.9 138.91 76.204-1/2 6.250 4.000114.3 158.75 101.60

525-25

525-202-3/8" EU 8RD

1.900" EU 8RD 525-06

2-7/8" EU 8RD


525-04

Base ProductNumber

1.660" EU 10 RD

3-1/2" EU 8 RD 525-35

4-1/2" EU 8 RD 525-45



Stradaset II Compression-SetPackerThe Weatherford Stradaset II Compression-Set Packer is a straddle packerassembly designed to isolate and selectively stimulate or test predeterminedintervals or perforations. The spacing between the elements is adjustable toany length, down to a minimum of 12 in. The Stradaset II is normally run inconjunction with a Fluid Control Valve and retrievable Equalizing StandingValve.

Features

Benefits

Applications

!!!!!!!!

!!!

!!

Three-element packoff on either side of intervalInternal bypass across both sets of elementsBooster sleeve between elements reduces packoff forceHydraulic hold-down buttonsAdjustable interval spacingTubing connections are standard on full-bore mandrelQuarter-turn initial set, pickup unset, slack off resetManual Jay mechanism allows repositioning without rotating pipe

Easy to run and operateEasy and economical to redressSimple to operate over long intervals

Perforation cleanoutSelective acidizing and stimulation




Stradaset II Compression-Set Packer

Size Weight Min. I.D. Max I.D.GageO.D.

MandrelI.D.

in./mm Lbs./ft. in./mm in./mm in,/mm in./mm3.920 4.000 3.750 1.500

4-1/2 99.57 101.60 95.25 38.10114.3 4.000 4.090 3.813 1.500

101.60 103.89 96.85 38.104.276 4.408 4.125 1.500

5 108.61 111.96 104.78 38.10127.0 4.408 4.560 4.250 1.500

111.96 115.82 107.95 38.104.670 4.778 4.500 1.750

5-1/2 118.62 121.36 114.30 44.45139.7 4.778 5.012 4.625 1.750

121.36 127.30 117.48 44.456-5/8 5.921 6.135 5.750 2.000168.3 150.39 155.83 146.05 50.80

5.920 6.184 5.750 2.000150.37 157.07 146.05 50.80

7 6.004 6.276 5.875 2.000177.8 152.50 159.41 149.23 50.80

6.276 6.538 6.125 2.000159.41 166.07 155.58 50.80

20-23 2-3/8" EU 8RD

17-24 2-7/8" EU 8RD

Casing


11.6-13.5

Packer

Base ProductNumber

646-462-3/8" EU 8RD

646-57

9.5-11.6 2-3/8" EU 8RD 646-45

11.5-15 2-3/8" EU 8RD 646-50

15-18 646-522-3/8" EU 8RD

2-7/8" EU 8RD 646-72

2-7/8" EU 8RD

646-552-3/8" EU 8RD

646-68

646-70

2-7/8" EU 8RD 646-68

14-20

29-38

26-35

17-26



B Perforation WasherThe Weatherford B Perforation Washer isolates selected intervals betweenheavy-duty packer cups to allow injection of stimulation fluids. The spacingbetween the cups is adjustable from 1 ft. minimum to optimize formationstimulation. No rotation is required to use the tool. The tool has a bypass tubeto equalize pressure above and below the tool, and to allow reversecirculation around the tool. A reversing cup on the top of the tool prevents fluidfrom re-entering perforations.

Features

Benefits

Applications

!!!!!

!!!

!!

Heavy-wall wire-reinforced packer cupsBackup cups to ensure reliable sealingInternal bypass tube for equalization and circulationReversing cup prevents fluid from re-entering formationNo rotation required to operate tool

Easy to run and operateVersatile tool spacing can be adjusted on wellsiteEasy and economical to redress

Perforation cleanout prior to gravel packingSelective acidizing and stimulation




B Perforation Washer

OD W eight Min. I.D. Max I.D.Thimble

O.D.

in./mm Lbs./ft. in./mm in./mm in./mm2-7/8 2.441 2.441 2.21573.0 62.00 62.00 56.264-1/2 3.920 4.090 3.765114.3 99.57 103.89 95.635-1/2 4.892 5.012 4.640139.7 124.26 127.30 117.86

7 6.184 6.276 5.766177.8 157.1 159.4 146.5

9.5 - 13.5 460-452-3/8" EUE 8 Rd

14 - 17 461-452-7/8" EUE 8 Rd

Casing

Part No.

3-1/2" EUE 8 Rd 460-70

StandardConnections

Wash Tool

460-251.900" NU 10 Rd6.4 - 6.5

26 - 29



B Rotational Unloader ValveThe Weatherford B Rotational Unloader Valve is a rotationally opened andclosed device used to provide fluid communication between the tubing andannulus above a packer or service tool such as the Weatherford B PerforationWasher. The B Rotational Unloader Valve may be used for spotting treatingfluid, equalizing pressure and draining the tubing when retrieving the toolsfrom the well.

Features

Benefits

Applications

!!!!!!!!

!!!

!!!

Rotationally opened and closedDrag blocks provide dependable operationLarge bypass area for fluid circulationFull Bore through toolRemains in the open or closed positionProvides torque transmission for packer operationsHigh Strength alloy steel constructionSeals protected from fluid flow in open position

Allows high circulation ratesSimple, Rig-Friendly operationMay be opened and closed repeatedly

Testing and treating operationsGeneral-purpose service workSqueeze cementing




B Rotational Unloader Valve

OD Weight Min. I.D. Max ID Max OD ID

in/mm Lbs./ft. in/mm in/mm in/mm in/mm4 1/2" 3.920 4.090 3.750 1.938114.3 99.57 103.89 95.25 49.23

4.154 4.276 3.750 1.9385" 105.51 108.61 95.25 49.23

127.0 4.408 4.560 3.750 1.938111.96 115.82 95.25 49.23

5 1/2" 4.548 5.105 4.411 1.938139.7 115.52 129.67 112.04 49.236 5/8" 5.575 6.049 5.380 2.484168.3 141.61 153.64 136.65 63.09

5.516 1.9387" 5.920 6.465 140.11 49.23

177.8 150.37 164.21 5.723 2.484145.36 63.09

7 5/8" 6.435 7.125 6.250 2.484193.7 163.45 180.98 158.75 63.098 5/8" 7.600 8.097 7.500 2.907219.1 193.04 205.66 190.50 73.84

2-7/8 EU 8RD 551-68

20-38

20-34

2-7/8 EU 8RD 551-72

2-3/8 EU 8RD 551-70

551-55

551-512-3/8 EU 8RD

13-26 2-3/8 EU 8RD

Casing


Packer

Base ProductNumber

9.5-10.5 2-3.8 EU 8RD 551-45

13-15 2-3/8 EU 8RD 551-50

18-21

2-7/8 EU 8RD 551-7624-29.7

24-40 3-1/2 EU 8RD 551-85



ARM Selective TreatingPackerThe Weatherford ARM Selective-Treating Packer is a compression-set isolationpacker t

2003 Packer Service Tools Catalog

Documents

Transcript of 2003 Packer Service Tools Catalog