2. OWB101700 BTS3900 WCDMA V200R014 Operation and Maintenanc.ppt
description
Transcript of 2. OWB101700 BTS3900 WCDMA V200R014 Operation and Maintenanc.ppt
www.huawei.com
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.
英文标题 :40-47pt
副标题 :26-30pt
字体颜色 : 反白内部使用字体 :
FrutigerNext LT Medium
外部使用字体 : Arial
中文标题 :35-47pt
字体 : 黑体 副标题 :24-28pt
字体颜色 : 反白字体 : 细黑体
BTS3900 WCDMA V200R014 Operation and Maintenance
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page3
Foreword
BTS3900 Base Station is the fourth generation base
station developed by Huawei. It features a multi-
mode modular design and supports multiple working
modes: GSM(GO) mode, UMTS(UO) mode ,LTE(LO)
mode ,GSM+UMTS(GU) dual mode, GSM+LTE(GL)
dual mode, UMTS+LTE(UL) dual mode through
different software configuration. Two BBU3900s can
be interconnected to support GSM/UMTS/LTE triple-
mode operation
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page4
References
“3900 Series Multi-Mode Base Station Product
Description”
“3900 Series Multi-Mode Macro Base Station
Commissioning Guide”
“NodeB LMT User Guide”
“NodeB MML Command Reference”
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page5
Objectives
Upon completion of this course, you will be able to:
Describe the structure of operation and maintenance
system
Detail routine operation of NodeB
Detail routine maintenance of NodeB
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page6
Contents
1. Operation and Maintenance System Overview
2. NodeB Routine Operation
3. NodeB Routine Maintenance
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page7
Operation and Maintenance System Structure The NodeB supports the following OM modes:
Local maintenance (default IP: 17.21.2.15)
Remote maintenance (configured IP: OMIP)
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page8
Operation and Maintenance Tool Component
LMT: Local Maintenance Terminal
Trace Viewer
Monitor Viewer
Traffic Review
Operation Mode
GUI (Graphic User Interface)
MML (Man Machine Language)
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page9
Operation and Maintenance Interface
1 - Menu bar 2 - Tool bar 3 - Navigation tree pane 4 - Object pane 5 - Output window 6 - Status bar
12
3
4
5
6
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page10
Contents
1. Operation and Maintenance System Overview
2. NodeB Routine Operation
3. NodeB Routine Maintenance
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page11
NodeB Routine Operation System Management
Alarm Management
Equipment Management
Cell Management
Real-time Monitoring
Software Management
File Management
Tracing Management
TrafficReview
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page12
System Management Login
IP address
User name: admin
Password: NodeB
Common Operations Locking/Unlocking LMT
Executing MML command Single MML command
Batch MML command
Setting the properties of the system
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page13
System Management (Cont.)
MML command structure : Action + Object
Main action: ADD/MOD/RMV/SET/DSP/LST/SWP/BLK
Main objective: BRD/LOCELL/E1T1/IMAGRP
Example:
DSP LOCELL
LST LOCELL
BLK BRD
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page14
System Management (Cont.)
Executing single MML command
Choose View > Command Window
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page15
System Management (Cont.)
Executing batch MML command
Choose System > Batch Commands, or press Ctrl
+ E
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page16
Alarm Management – Alarm Types Classified by
nature Fault alarm Event alarm
Classified by alarm state
Active alarm Recovery alarm
Classified by network management
Power system alarms Environment system alarms Signaling system alarms Trunk system alarms Hardware system alarms Software system alarms System running alarms Communication system
alarms QoS alarms
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page17
Alarm Management – Alarm Severity Critical Alarm
Major Alarm
Minor Alarm
Warning
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page18
Alarm Management Browsing alarm
Choose Fault Management/ Browse Alarm or click
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page19
Alarm Management (Cont.) Querying alarm details
Double click an alarm record in the alarm browse window
Click the button of “Solution” to query related information
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page20
Alarm Management (Cont.) Querying alarm logs
Choose Fault Management > Query Alarm Log or click the shortcut icon
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page21
Alarm Management (Cont.)
Manually Recovering an
Alarm
In the Browse Alarm
window, select an alarm
report
Right-click the alarm report.
A shortcut menu is
displayed.
Select Manually Recover
Alarm from the shortcut
menu.
The Confirm dialog box is
displayed
Click Yes
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page22
Alarm Management (Cont.) Saving the Information of a
NodeB Alarm
Save all or part of the alarm
records displayed in the Alarm
Browse window. The Save
dialog box is displayed
Right-click the alarm you would
like to save, and select Save
Selected Alarms
Enter a file name and specify a
path and a file type, Click Save
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page23
Alarm Management (Cont.) Manually Printing Alarm Information
Right-click in the window and choose Print All Alarms from the shortcut menu
Querying Alarm Handling Suggestions
In the Browse Alarm window or the Query Alarm Log window, double-click an alarm. The Alarm Detailed Information dialog box is displayed
Clearing the Alarms
Right-click in the Alarm Browse window or Query Alarm Log window. The shortcut menu is displayed, Select the operation from the shortcut menu as needed, such as Clear All Recovery Alarms , Clear Active Window , Clear Selected Recovery Alarms
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page24
Alarm Management (Cont.) Shielding NodeB Alarms-GUI mode
Select Fault Management > Query Alarm Configuration. The Query Alarm Configuration dialog box is displayed
Set the search conditions in the dialog box Click OK. The Query Alarm Configuration window is
displayed with the query result Select an alarm record to be modified in the window.
Right-click the alarm record and select Modify Alarm Configuration on the shortcut menu. The Modify Alarm Configuration dialog box is displayed
Modify Shield Flag in the dialog box , Click OK. Shielding NodeB Alarms-MML mode Run the command SET ALMSHLD to set alarm
shielding flag
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page25
Equipment Management
NodeB device panel
In the navigation tree
of the Local
Maintenance Terminal
window, click the
Device Panel tab
Select Device
Management >
Cabinet Name. The
device panel is
displayed
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page26
Equipment Management (Cont.) Operating the physical topology
In the navigation pane, click the Maintenance tab Double-click Topology Management > RRU
Physical Topology. The physical topology is displayed
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page27
Equipment Management (Cont.) Operations on the NodeB
List Current Software Version
LST VER List the information about the software stored on the
NE
LST SOFTWARE Reset Base Station
RST NODEB
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page28
Equipment Management (Cont.) Operations on the board
Querying Board Status
DSP BRD Querying Board Version
DSP BRDVER Blocking/ Unblocking Board
BLK BRD / UBL BRD Resetting Board
RST BRD
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page30
Equipment Management (Cont.) Time and clock operation
Querying NodeB Present Time
DSP TIME Modifying NodeB Present Time
SET TIME Listing the parameters of the SNTP client of the NE
LST SNTPCLTPARA Displaying Current Clock Status of NodeB
DSP CLKSTAT Modifying the reference clock source of NodeB
SET CLKMODE
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page31
Iub Interface Protocol (ATM)
SAAL UNI SAAL UNI
ALCAP
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page32
Iub Interface management
Querying physical layer status
Display E1T1 Status and work mode
DSP E1T1
Display STM-1 Status
DSP STM1
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page33
Iub Interface management (Cont.) Querying link layer status
Display UNILNK status
DSP UNILNK Display IMA link status
DSP IMALNK Display IMA group status
DSP IMAGRP
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page34
Iub Interface management (Cont.) Querying transport layer status
Display the status of all NCP/CCP ports
DSP IUBCP Display AAL2 node status
DSP AAL2NODE Display AAL2 path status
DSP AAL2PATH Display SAAL link status
DSP SAALLNK
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page36
Iub Interface Protocol (IP)
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page37
Iub Interface management_IPRAN Querying physical layer status
Display Ethernet Port
DSP ETHPORT
List Device IP Address
LST DEVIP
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page38
Iub Interface management_IPRAN Querying link layer status
Display PPP Link Status
DSP PPPLNK
Display Multilink PPP Group Status
DSP MPGRP Display PPP Link Status in Multilink PPP Group
DSP MPLNK Display Ethernet Trunk Group Status
DSP ETHTRK
Display the status of a member port of an Ethernet trunk
DSP ETHTRKLNK
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page39
Iub Interface management_IPRAN Querying transport layer status
Display IP Route
DSP IPRT
Display IP Path State
DSP IPPATH
Display ARP
DSP ARP
Display SCTP Link State
DSP SCTPLNK
List DHCP Server IP Address
LST DHCPSVRIP
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page41
Real-time State Monitoring
Classification of monitoring task CPU/DSP Usage
Cell Service Resource
Board Service Resource
NodeB Output Power
NodeB RTWP
Create a monitoring task
Choose Maintenance > Common Monitoring >
CPU/DSP Usage
Choose Add Task to create a monitor task
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page42
Software Management
NodeB software
NodeB BOOTROM : Firmware.csp
NodeB software : Software.csp
Cold patch software : SwCPatch.csp
Hot patch software : SwHPatch.csp
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page43
Software Management (Cont.) Update BootROM software
Double-click Software Management >Software Update >Upgrade BootROM
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page44
Software Management (Cont.) Update NodeB software
Double-click Software Management >Software Update >Upgrade NodeB Software
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page45
Software Management (Cont.)
Procedure of loading NodeB software
Copy NodeB software to flash disk
Insert the USB flash drive into the USB port on the
WMPT/UMPT of the BBU3900
Wait until the NodeB automatically downloads the
software and data configuration file, and activates the
software and resets
Remove the USB flash drive after the commissioning is
complete
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page46
File Management File types of the NodeB
Data Configuration File
Operating Log
One-Click Log DSP Memory Log
RTWP Routine Test Log
Device Archive File
Obtaining NodeB files
Upload the files to the server, then log in to the FTP server to browse
the files
Browse the operation log on the M2000
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page47
File Management (Cont.) Download/Backup the NodeB configuration file
GUI Mode: double-click Software Management > Data Configuration File Transfer
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page48
File Management (Cont.) Download/Backup the NodeB configuration file
MML Mode: Step 1: BKP CFGFILE Step 2: DLD CFGFILE
BKP CFGFILE
ULD CFGFILE
Database
Magnetic disk
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page49
File Management (Cont.)
Procedure of downloading NodeB configuration file
Copy NodeB configuration file to flash disk
Insert the USB flash drive into the USB port on the
WMPT/UMPT of the BBU3900
Wait until the NodeB automatically downloads the
software and data configuration file, and activates the
software and resets
Remove the USB flash drive after the commissioning is
complete
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page50
File Management (Cont.)
Upload NodeB logs to FTP server
Double-click Software Management > Other File
Transfer
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page51
File Management (Cont.)
Upload a device archive to FTP service
Double-click Software Management > Device
Archives Transfer
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page52
Tracing Management Classification of tracing task
Tracing Iub interface Messages
IP Message Statistics
Tracing SCTP Messages
Tracing Cell Messages
Creating a tracing task
In the navigation pane tree, click the Maintenance tab
Choose Trace Management > Interface Trace Task
Then double-click Standard Signaling Interface
Tracing
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page53
TrafficReview Management
The TrafficReViewer works in offline mode, and
permits you to browse saved messages in .mmf
format
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page54
Contents
1. Operation and Maintenance System Overview
2. NodeB Routine Operation
3. NodeB Routine Maintenance
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page55
Basic Mission of Maintenance (ATM) Item Operation guide Reference standard
Software version LST VER
List Current Software Version of NE
Indicator state Boards or device panel ALM is off
Fault alarmAlarm management system
No fault alarms
Event alarmAlarm management system
No event alarms that affect system services
Cell state DSP LOCELL Local Cell Available Physical layer DSP E1T1 The states are available
Link layerDSP IMAGRP, DSP IMALNK
The states are available
Transport layer
DSP IUBCPDSP AAL2NODEDSP AAL2PATH
The states are available
Clock DSP CLKSTAT The state are normal
RTWPReal-time state monitoring
The value is within normal range
Tx powerReal-time state monitoring
Transmit power between the NodeB and the RNC is consistent
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page56
Questions
What’s the differences between the command LST
VER and LST SOFTWARE?
Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved. Page57
Thank youwww.huawei.com