2-channel power amplifier, 2 x 600 watts @ 4 ohms filecombination CH1 subwoofer and CH2 trafo...
3
REVAMP2600 2-channel power amplifier, 2 x 600 watts @ 4 ohms TECHNICAL SPECIFICATIONS 19" (483 mm wide) rack mounting Yes depth (build in) in mm 334 power supply in volts 230 VAC power consumption (max) in watts 1840 output power RMS 8 ohms in watts 2 x 300 minimum impedance load in ohms 4 line input balanced 2 Channel separation > 67 dB @ 1 kHz frequency response (in Hz) 10 - 24K applicable low impedance Yes height- rack units (1U=44 mm) in U 2 depth (incl front) in mm 340 Power supply technology toroidal transformer output power RMS 4 ohms in watts 2 x 600 dynamic output power in watts 2 x 840 output channels 2 line input unbalanced 2 Power amp topology Class-H cooling system fan REVAMP2600 is a professional 2-channel power amplifier with 2 x 600 watts output power @ 4 ohms. The digital signal processor inside operates with one simple push button at the back of the unit to select an operating mode (10 presets) what makes this amplifier the ideal multipurpose tool for applications where you need a lot of power in two different zones like fitness centres or stereo applications. The amplifier contains an intelligent variable speed cooling fan. The REVAMP2600 also temporally decreases the output power to a safe limit whenever a thermal overload occurs (indicated by a LED light on the front panel). The very intuitive front display shows what is going on with one blink of an eye. Thanks to our own designed automatic protection system (patent pending) with smart use of a compressor/limiter topology we bring our power supply to an unexpected high level! This manifests itself in a great dynamic power with an unseen musicality and exceptional dynamic sound. There are 9 presets available which can be selected by the button at the back of the unit. An example of a preset is the combination CH1 subwoofer and CH2 trafo load. In this example you have a low-pass filter for increased stability when using 100 volt transformers on the output, allowing you to use 100 volt speakers as top speakers combined with a standard low impedance subwoofer. With the other presets channels can be linked, high pass filters can be applied to a channel... Ease of use, high-tech, reliability and big output power has never been as cleverly combined as in this REVAMP2600 amplifier. www.apart-audio.com | [email protected] REVAMP2600
Transcript of 2-channel power amplifier, 2 x 600 watts @ 4 ohms filecombination CH1 subwoofer and CH2 trafo...
REVAMP26002-channel power amplifier, 2 x 600
watts @ 4 ohms
TECHNICAL SPECIFICATIONS
19" (483 mm wide) rack mounting
Yes
depth (build in) in mm 334
power supply in volts 230 VAC
power consumption (max) in watts
1840
output power RMS 8 ohms in watts
2 x 300
minimum impedance load in ohms
4
line input balanced 2
Channel separation > 67 dB @ 1 kHz
frequency response (in Hz) 10 - 24K
applicable low impedance Yes
height- rack units (1U=44 mm) in U
2
depth (incl front) in mm 340
Power supply technology toroidal transformer
output power RMS 4 ohms in watts
2 x 600
dynamic output power in watts 2 x 840
output channels 2
line input unbalanced 2
Power amp topology Class-H
cooling system fan
REVAMP2600 is a professional 2-channel power amplifier with 2 x 600 watts output power @ 4 ohms. The digital signal processor inside operates with one simple push button at the back of the unit to select an operating mode (10 presets) what makes this amplifier the ideal multipurpose tool for applications where you need a lot of power in two different zones like fitness centres or stereo applications.
The amplifier contains an intelligent variable speed cooling fan. The REVAMP2600 also temporally decreases the output power to a safe limit whenever a thermal overload occurs (indicated by a LED light on the front panel). The very intuitive front display shows what is going on with one blink of an eye. Thanks to our own designed automatic protection system (patent pending) with smart use of a compressor/limiter topology we bring our power supply to an unexpected high level! This manifests itself in a great dynamic power with an unseen musicality and exceptional dynamic sound.
There are 9 presets available which can be selected by the button at the back of the unit. An example of a preset is the combination CH1 subwoofer and CH2 trafo load. In this example you have a low-pass filter for increased stability when using 100 volt transformers on the output, allowing you to use 100 volt speakers as top speakers combined with a standard low impedance subwoofer. With the other presets channels can be linked, high pass filters can be applied to a channel...
Ease of use, high-tech, reliability and big output power has never been as cleverly combined as in this REVAMP2600 amplifier.
www.apart-audio.com | [email protected]
REVAMP2600
