2 4 OBDLink MX Wi-Fi - ScanTool.net › scantool › downloads › 182 › ... · the ‘Wi-Fi’...
Transcript of 2 4 OBDLink MX Wi-Fi - ScanTool.net › scantool › downloads › 182 › ... · the ‘Wi-Fi’...
. .
Wi-Fi Key:
OBD HOSTPOWER Wi-FiOBD H Wi-Fi
LOCK
ACC ONSTART
‘POWER’ LED will turn ON, and the white ‘Wi-Fi’ LED will emit a � ash every 3 seconds.
– LEDs are o� ? Check vehicle for blown fuses.
Vehicles with push button start: press the button without stepping on the brake pedal.
Android Quick Start GuideOBDLink MX Wi-Fi
Android
2
1
4Scan the QR code or visit the URL from your Android device to download the OBDLink app:
The factory default Wi-Fi Key is found on the bottom of the unit. It is lowercase and includes periods.
obdlink.com/app
Download & install OBDLink appTurn ignition to Key On, Engine O� position
Write down the 14-digit Wi-Fi Key
[instructions continue on reverse ]
The DLC is usually found on the driver’s side, under the dash.
– Can’t � nd your DLC? Visit dlc-locator.com
3 Plug MX Wi-Fi into the diagnostic link connector (DLC) 5 Open ‘Settings’ app, and tap ‘Wi-Fi’
Thank you for your purchase!
If you like OBDLink MX Wi-Fi,please post your review on
9 Launch OBDLink app, tap ‘Connect’
8 Enter the Wi-Fi Key from step #1 in the ‘Password’ � eld, and tap ‘Connect’
– Need help? Go to obdlink.com/support or scan the QR code
– For advanced configurations, go to obdlink.com/setup or scan the QR code
6 Turn Wi-Fi on
7 Select ‘OBDLink MX’ from the list of networks
The network status will change to ‘Connected,’ and the ‘Wi-Fi’ LED will change to a slow blink.
– Remember that the Password is lowercase and includes periods.
OBD HOSTPOWER Wi-Fi
10 Choose ‘Wi-Fi’
Once the app establishes a connection with MX, the ‘Wi-Fi’ LED will turn on solid. Tap ‘Diagnostics’ to start a scan.