songcong.com.vnsongcong.com.vn/public/files/MySC110-WN 1port +wifi.docx · Web viewIt provides one...

10
MYSC110-WN ADSL Modem Product Specifications

Transcript of songcong.com.vnsongcong.com.vn/public/files/MySC110-WN 1port +wifi.docx · Web viewIt provides one...

MYSC110-WNADSL Modem

Product Specifications

Copyright © T&W 2011 All rights reserved .

Product Specifications

OverviewThe MYSC110-WN is a high-performance wire less ADSL router, uplink rate up to 1

Mbps and downlink rate up to 24 Mbps. It provides one RJ11 telephone interface, 1 RJ45

Ethernet interface. The telephone interface is used for connecting to the Internet provided

by the telecom carrier. The Ethernet interface is used for connecting to the computer,

through which you can access the Internet. The MYSC110-WN is an ideal broadband

CPE solution for both home users who wish to share high-speed Internet access and small

offices that wish to do business on the Internet.

The MYSC110-WN has Web-based graphic user interface (GUI), in which you can

easily modify the settings and connect to your ISP. It also provides flow statistics,

connection status, and other detailed information. It supports static IP address, dynamic IP

address, and PPPoE connection. The MYSC110-WN is easily upgraded and provides

terminal users and ISP with the guarantee of future.

Main FeaturesWireless Ethernet IEEE 802.11n support

Back PanelPage 2

On/Off

Copyright © T&W 2011 All rights reserved .

Application w Home gateway

w SOHOs

w Small enterprise

w Higher data rate broadband sharing

w Shared broadband Internet access

w Audio and video streaming and transfer

w PC file and application sharing

w Network and online gaming

Page 3

Copyright © T&W 2011 All rights reserved .

Parameters and Specifications

Parameter Specification

System SpecificationsChipset RT63363 +RT5390

RAM 16MB

Flash 4MB

Wi-Fi 2.4G 11b/g/nFeature and Technical Specifications

w 1 x RJ11w 1 x RJ45 for 10/100 Base-T Ethernet LANw 1 x Reset button for factory default settings

External Connectors

LED Indicators

ADSL Features

Wireless Features

Routing Features

w 1 x WPS buttonw 1 x WLAN buttonw 1 x Antenna

w POWERw DSLw INTERNETw LANw WLANw WPSw Annex A, I, J, L & Mw ANSI T1.413i2w ITU G.992.1 (G.dmt)w ITU G.992.2 (G.lite)w ITU G.992.3 ADSL2 (G.dmt.bis)w ITU G.992.4 (G.lite.bis)w ITU G.992.5 (G.dmt.bisplus)w ITU G.994.1 (G.hs)w ITU G.995.1, ITU G.996.1, ITU G.997.1, ITU-T K.2.1w Power Saving Mode, L3 to L0 initializationw Support 8 PVCs 4w Support Traffic Shaping (ATM QoS) UBR, CBR, VBR-rt,VBR-nrtw Support OAM F4/F5 loop-back, AIS, and RDI OAM cellsw UNI 3.1/4.0 Permanent Virtual Circuits

w Compatible with IEEE 802.11b\IEEE 802.11g and IEEE 802.11nw Support auto channel selectionw Support WPSw Support 64/128-bit WEP, WPA-PSK & WPA2-PSK for wireless securityw Support MAC address filteringw Wireless frequency range, 2400~2488 MHz ISM band

w Routing (TCP/IP/UDP/ARP/ICMP)w 802.1D MAC Bridgew RIP v1 (RFC1058), RIP v2 (RFC1723)w IGMP Snooping v1/v2/v3

Management w Web based Configuration

Parameter Specificationw Telnet managementw Command-line Interpreter (CLI)w Web Page/X-Modem/FTP/TFTP Firmware upgradew Remote ManagementAdvanced Features

Network

Security

Environment Requirements

w Diagnostic Tool for ADSL and IP Pingw CPE WAN Management Protocolw Universal Plug and Play (UPnP) Internet Gateway Device (IGDv1.0)w IETF RFC 2030 SNTP (Simple Network Time Protocol) Client

w IPv4w IPv6 (IPv6 ready logo Phase II core for router, Dual stack)w DHCP Server/Relay, DHCP Client (WAN Port)w PPPoE, PPPoA, IPoA , RFC 2684 Bridging/Routingw NAT and PATw Static Routingw ALG (MSN Messenger, PPTP, L2TP, FTP, RTSP (RealTime Streaming

Protocol), SIP v1/v2, H.323, IPSECw DMZ, Virtual Server ( Port forwarding) w PPPoE passthrough (Bridge Interface) w VPN (IPSec, PPTP, L2TP) pass-through

w Management Access Control for LAN/WAN sidesw Prevent port scanning & illeagle packet attackw Stateful Packet Inspection(SPI)w IP Spoofing, IP with zero lengthw IP/ MAC filtering, Application filtering, URL filter

Operating Temperature 0ºC - 40ºC

Storage Temperature -20ºC - 70ºC

Operating Humidity 10% - 95%, non-condensing

Storage Humidity 5% - 95%, non-condensing

Power adapter input 100V - 240V AC, 50/60Hz

Power adapter output 12V DC, 0.5A

Consumption 5W

EMC and Safety

Regulatory ComplianceFCC CE

Safety Regulations UL

Green Standard RoHS

Physical CharacteristicsPhysical Dimension L*W*H=109mm*102mm*33mm

Parameter Specification

Weight 153 g (not including power adapter)

Copyright © T&W 2011 All rights reserved