Objectives

Paulson offers the most comprehensive training and service package available to the plastics industry. Paulson Training Programs provides a board range of molding training solution to help businesses grow and compete on a global scale. It has always been our goal to provide convenient, high-quality, and affordable solutions while utilizing the latest technology.

Our extensive Injection Molding Training library provides solutions for every area of your company – from front office to shop floor. It’s a total solution for any company.

1.PAULSON Training Program on Injection Molding Process

Total No. of Hours to Complete the Course – 25Hrs minimum

Injection Molding Part – Problems & Solutions6

For People concerned with Design of plastic parts & Molds

Skill Builder – for Problems & Solutions5

Skill Builder – for M/C Optimizing`4

Practical Injection Molding - Expert Series3

Practical Injection Molding - M/c & Process Optimizing2

For People Concerned with Product of injection molded Parts

Practical Injection Molding - Basic1

RelevanceModule Name#

Paulson’s Training Program Contents Overview

2.PAMSTAMP – Software Solution for Sheet Metal Stamping

PAM-DIEMAKER PAM-QUICK STAMP PAM-AUTOSTAMP

Objectives

PAM-STAMP 2G is a complete software solution for sheet metal stamping to simulate the entire industrial chain from die design feasibility to process validation and optimization.

PAM-DIEMAKER

Rapid Die Design

With its robust and fast parametric surface engine, PAM-DIEMAKER allows focusing on rapid draw die design and optimization. It also ensure optimal data transfer with user’s standard CAD geometry.

PAMSTAMP – Software Solution for Sheet Metal Stamping

PAM-QUIKSTAMP

Fast Feasibility Assessment

With its new incremental formulation PAM-QUIKSTAMP enables a quick evaluation of the draw die design. It represents the optimal solution between accuracy and computation time.

PAM-AUTOSTAMP

Simulation for production Validation

With its newly re-engineered platform PAM-AUTOSTAMP allows the final validation quality control, tolerances, trimming, improved spring back and flanging.

PAM-STAMP 2G allows users to make decision on-line in a continuous improvement process within a collaborative environment bringing together the design engineer, the material provider, the die designer and the try-out press shop from an early stage of the design right through to production. Projects results are easily shared within the project team by making use of integrated reporting tools. This web-enabled technology allows images, annotation, text and 3D, models to be shared, thus supporting a truly collaborative engineering environment.

3. DFMA – Software for Design for Manufacturability & Assimilability

Objectives

The goal is to help companies stimulate the creativity, innovation, and teamwork necessary for the development of world-class product by imparting systematic training in the DFMA software.

Boothroyd Dew Hurst DFMA Software tools allow companies to develop product with fewer parts at lower coast and with higher quality than was previously possible. Its disciplined approach to product development provides an early and accurate understanding of product cost and the capability to manage cost during the product development process. Finally it puts manufacturing information in the hands of design teams.

Industries all over the world have been using DFMA software tools since 1983.

Our aim is to train our client for competitive advantage in their marketplace, and they understand the importance of crating products that are simple in structure, low in cost, and high in quality.

5. GD&T – Software for Geometric Dimensioning & Toleranceing vide ASME-Y14.5-1998

Objectives

One can evaluate his/her knowledge on Geometric Dimensioning & Tolerancing from fundamentals to advanced levels, The topics covered are

Circularity6

Straightness5

Flatness4

Rules3

Modifiers & Symbols2

Introduction 1

TopicsSI.No

Total Runout17

Circular Runout16

Profile of a Surface15

Profile of a Line 14

Concentricity13

Symmetry12

Position11

Angularity10

Perpendicularity9

Parallelism8

Cylindricity7

TopicsSI.No

FREQUENTLY ASKED QUESTIONS (FAQ’S)

ABOUT

COMPUTER BASED TRAINING (CBT)

AT NTTF-TAGMA LIBRARY

1. What are the Computer Based Training (CBT) Modules available at NTTF TAGMA library?

1.1 Paulson’s Training on Injection Molding Process from USA

1.2 Mold flow Analysis for injection Molded Plastic Part from USA

1.3 Formability Analysis for Sheet metal components ‘Pamstamp’ from France

1.4 Design For Manufacturing & Assembly (DFMA) Software from USA

1.5 Geometric Dimension & Tolerancing software from NTTF

2.Where is NTTF-TAGMA Library Located?

NTTF-TAGMA Library

At NTTF Training Centre

23/24, 2nd Phase, Peenya Industrial Area

Banglore-560058

Ph: 080-41271054

Mob: +91-9945776517

Rs. 7,500/-Rs. 6,000/-3 DaysGeometric Dimensioning & Tolerancing

Rs. 10,000/-Rs. 8,000/-4 DaysPaulson's Training Programme

For non MembersFor Members

Course FeesDurationCourse

3. What is the programme fee and how to send it?The training charges for using the CBT Lab are as follows:

Course Details:

Payment to be made by DD in favour of NTTF Bangalore.

(Fee includes 2 Tea and 1 working Lunch)

4. Who can attend?Anybody interested in improving his / her knowledge in areas mentioned in #1.

5. Where do I stay? What is the cost?Accommodation booking will be done by NTTF in hotel ‘Krishna Chandra Residence’ or Vishwas Lodge’ at TVS cross, 1 km from Training venue.Boarding and Lodging charges to be borne by the participants.

Tariff:

Rs. 500 / day

Rs. 500 / day

Double

Not Available

Not available

Rs.700-800 / day

A/c

Rs. 350 / day Vishwas Lodge 2

Single Krishna Chandra Residency

1

Deluxe Room Hotel Name #

For accommodation, booking should be informed 2 days minimum in advance.

6. What is the training duration and timings?4days (Any consecutive working days in a week. (In special cases, we can accommodate On Sundays also)Timings: 09-00a.m. to 05-00p.m.

7. What are the other facilities available at NTTF-TAGMA Library?

News papers, Magazines, Internet Browsing, Reference books and

following Video and Knowledge based CD’s

8. Contact Person:

Librarian

NTTF – TAGMA Library

Ph: 080-41271054

Mob: +91-9945776517

Email: library@tagmaindia.org

Mark a copy of your mail to pgschool@nttf.co.in for additional information

9. Remarks:

9.1 Maximum number of participants for CBT program is limited to 10 at any given time.

9.2 It is recommended that participants come in group of not less than five.

9.3 Video CD’s & other knowledge base CD”S can be viewed only. They cannot be copied as they are meant only for training by NTTF.