1.KingTech Telemetry Flow

1.JR2.JETI3.FUTABA4.Graupner

Setting Fuel Tank

Telemetry Select

Press <2> Enter to Telemetry MenuPress <3> or <4> Go to Learn RC Menu

KtTele01 0.03 20170427

Set Pump Factor

Twin :1. Enable2. Disable

Rpm Disp Scale:1. 12. 103. 1004. 1000

KtTele01 0.02 20170427

Save 3 para.:1. RC System2. Fuel Tank3. Pump Factor4. Twin support5. Rpm Display X

Show KT Telemetry1.Serial Number 2.Firmware Version

KtTele01 0.01 20170427

Goto Telemetry 1/8

2.Pump Fact Tunning:

Input Fuel Tank Capacity

Fill Fuel

Do a Normal Fly with Timer, Don't Care Cap/Fuel report from telemetry.

After Landing, Check remain capacity from fuel tank and telemtry report

Report >Tank

Yes

No

INC PumpFactor

DEC PumpFactor

Telemetry. Disp remain > fuel TANKTelemetry. Disp remain < fuel TANK

Telemetry calculated more fuel consumption with higher Pump Factor .

KtTele01 0.03 20170331

3.Telemetry Install:3.Telemetry Install:

KT Telemetry have dual streaming :(a) SPEKTRUM(b) JR/JETI/Futaba/Graupner

KtTele01 0.04 20170427

3.1 Single Engine mode: 3.1.1 Main port conect to ECU (slot: GSU). 3.1.2 Second port , plug a GSU (LCD screen) devie

3.2 Twin Engine mode: 3.2.1 Main port conect to ECU (slot: GSU). 3.2.2 Second port connect to the second ECU (slot: GSU).

Blue led: Main port received data.Green led: info output to receiver(RX).

3.3 Twin Function Flow:

KT Telemetry Power ON

KtTele01 0.01 20170427

Is Twin Enabled?

Single andSetting Mode Twin Mode

SecondPortReceviced

WaitTimeOut 5Sec No

Yes

Yes

No

Yes

No

Telemetry wait the second port received a data for 5Sec. If Twin function be enabled.