1994 10 C547 07770 rv 1994 10 C547 07770 rv 15.04.10 08...
Transcript of 1994 10 C547 07770 rv 1994 10 C547 07770 rv 15.04.10 08...
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 1
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 2
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 3
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 4
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 5
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 6
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 7
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 8
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 9
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 10
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 11
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 12
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 13
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 14
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 15
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 16
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 17
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 18
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 19
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 20
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 21
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 22
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 23
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 24
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 25
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 26
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 27
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 28
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 29
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:29 Seite 30
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:30 Seite 31
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:30 Seite 32
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:30 Seite 33
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:30 Seite 34
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:30 Seite 35
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:30 Seite 36
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:30 Seite 37
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:30 Seite 38
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
1994_10_C547_07770_rv_1994_10_C547_07770_rv 15.04.10 08:30 Seite 39
Prinect Printready ColorCarverPage is color controlled with Prinect Printready ColorCarver 4.0.76Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): Print Gray.icm
RGB Image:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: ECI_RGB.icmRendering Intent: PerceptualBlack Point Compensation: no
CMYK Image:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
CMYK Graphic:Profile: ISOcoated_v2_eci.iccRendering Intent: PerceptualBlack Point Compensation: noPreserve Black: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: noGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: yes Limit: 98%Turn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: noDelete "All" Colors: noConvert "All" to K: no
-
Mikrofone · Kopfhörer · Drahtlosmikrofone · Drahtloskopfhörer · Kopfsprechgarnituren · Akustische KomponentenMicrophones · Headphones · Wireless Microphones · Wireless Headphones · Headsets · Electroacoustical ComponentsMicrophones · Casques HiFi · Microphones sans fil · Casques sans fil · Micros-casques · Composants acoustiquesMicrofoni · Cuffie HiFi · Microfoni senza filo · Cuffie senza filo · Cuffie-microfono · Componenti acusticiMicrófonos · Auriculares · Micrófonos inalámbricos · Auriculares inalámbricos · Auriculares con micrófono · Componentes acústicosMicrofones · Fones de ouvido · Microfones s/fios · Fones de ouvido s/fios · Microfones de cabeça · Componentes acústicos
Technische Änderungen vorbehalten. Specifications subject to change without notice. Ces caractéristiques sont susceptibles de modifications.Ci riserviamo il diritto di effettuare modifiche tecniche. Nos reservamos el derecho de introducir modificaciones técnicas. Especificações sujeitas a mudanças sem aviso prévio.
05/16/5069157_B
AKG Acoustics GmbH Laxenburger Straße 254, A-1230 Vienna/AUSTRIA, phone: (+43-1) 86654-0*, e-mail: [email protected]
For CE declaration please contact [email protected] other products and distributors worldwide visit www.akg.com
PAP
22