VMTX-12P-HDMI12 Input Multi Format Video Switcher

With HDBASE-T, VGA and HDMI OutputsINSTRUCTION MANUAL

118 W. Streetsboro Street, Ste. 125 | Hudson, OH 44236 | Toll Free: (866) 865-7737V.1.1

TABLE OF CONTENTS

SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fi re, electrical shock and injury to persons. To prevent fi re or shock hazard, do not expose the unit to rain, moisture or install this product near water. Never spill liquid of any kind on or into this product. Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside

the unit. Do not attach the power supply cabling to building surfaces. Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged. Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it. To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for

suffi cient space for air to circulate around the unit.

CONTENTS Introduction & Contents .........................................................1

Features ................................................................................ 2

Specifi cation ......................................................................... 3

Front and Real Panel ...........................................................4

Video/Audio Description ........................................................5

OSD Operation (On-Screen-Display) .................................... 7

IR Remote Description ........................................................9

RS-232 Cable Pins Used .....................................................10

RS-232 Control Command Introduction ...............................11

TCP/IP Controlling .............................................................13

Firmware Updating / System Diagram..................................15

DISCLAIMERSThe information in this manual has been carefully checked and is believed to be accurate. We assume no responsibility for any infringements of patents or other rights of third parties which may result from its use.

We assume no responsibility for any inaccuracies that may be contained in this document. We make no commitment to update or to keep current the information contained in this document.

We reserve the right to make improvements to this document and/or product at any time and without notice.

COPYRIGHT NOTICENo part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer fi le, in any form or by any meanselectronic, mechanical, magnetic, optical, chemical, manual, or otherwisewithout express written permission and consent

Copyright 2011. All Rights Reserved.Version 1.1 October 2012

TRADEMARK ACKNOWLEDGMENTSAll products or service names mentioned in this document may be trademarks of the companies with which they are associated.

INTRODUCTION, CONTENTS, OPERATION NOTICE

INTRODUCTIONThis is a manual for Presentation Scaler switcher VMTX-12P-HDMI.

This manual is only for operating procedures, not for any maintenance or servicing. The functions described in this version were updated October 2011. Any changes of functions and parameters since then will be informed separately. Please refer to the dealers for the latest details.

This manual is copyright A-NeuVideo, inc. All rights reserved. No part of this publication may be copied or reproduced without the prior written consent of A-NeuVideo, Inc.

PACKAGE CONTENTSVMTX-12P-HDMI Switch IR Remote Control IR extender HDBASE-T Receiver Rack Mounts RS-232 driver CD (All Windows Operating Systems) Users Guide AC Power Cord (North America)

1

FEATURES

FEATURESVMTX-12P-HDMIis a presentation scaler switcher with digital amplifi er, it is designed for multi-signal processing, signals of C-Video, S-Video, YPbPr, VGA and HDMI can be scaled to high-resolution HDMI & VGA format. It supports fi rmware updating via USB.

1. 12 channels video inputs: 4x HDMI, 4x VGA, 1xYPbPr(Component Video), 2xC-Video (Composite Video), 1x S-Video. All of these inputs will be scaled/switched to HDBaseT, HDMI & VGA outputs.

2. Supports VESA standard, including: 640x480, 800x600, 1024x768, 1280x1024, 1280x768, 1360x768/60Hz & 1920x1080, supporting the DDC2/B plug and play.

3. Video signal formats include NTSC, PAL, SECAM. It is auto-adjustable.

4. Video gain-compensation technology, 10Bit processing.

5. Component (YPbPr) supports interlaced scanning and progressive scanning, from 480i to 1080p with its built in 1080i up-scaling function.

6. Clear graphical user interface, easy for operation.

7. Adjustable aspect ratio, zoom in/out the output image, special mode for computer with HDMI.

8. Brightness, Contrast, Sharpness and Color Temperature can be adjusted.

9. The HDMI input supports 1920*1080 full-digital signal, supporting Bit Synchronous Digital audio decoding

10. VGA input can be adjusted, including phase, clock, H position and V position.

11. USB port for fi rmware updates.

12. 2 MIC inputs with level control, MIC with pre-amplifi cation, line for direct connection. Volume of both MICs can be adjusted at the same time.

13. Power-fail memory function. When power restored, last know state will restore.

14. Advanced picture adjust, including DNR, CTI, Flesh Tone and Adaptive Luma Control.

15. Freeze Picture feature.

16. HDMI output resolution supports XGA (1024768), 720P(1280x720), WXGA(1280800), HD(1360768), 1080P(19201080).

17. TCP/IP control.

2

SPECIFICATIONS

SPECIFICATIONSVideo Input Video OutputInput 4 HDMI

4 VGA 1 YPbPr2 C-Video1 S-Video

Output 1 HDMI1 VGA 1 HDMI TP

Input Connector HDMI female connectorVGA(15 pin HD), female connectorRCA female connector4 pin mini DIN connector

Output Connector HDMI female connector VGA(15 pin HD), female connectorRJ-45 connector

Video Signal HDMI 1.3RGBHV, RGBs, RGsB, RsBsGs,NTSC 3.58, NTSC 4.42,PAL,SECAM

Video Signal HDMI 1.3VGAHDMI TP

Video GeneralResolution Range 1080P:1920*1080

HD: 1360*768720P: 1280*720WXGA:1280*800XGA: 1024*768

Bandwidth HDMI: 4.95Gbps(1.65Gbps per color) C-Video/S-Video: 150MHz YPbPr: 170MHz VGA: 375MHz

Maximum Pixel Clock

145MHz Video Impedance 75

Gain 0dB Input / Output Level 0.5V~2.0Vp-pHDCP management Compliant with High-bandwidth Digital Content Protection(HDCP) with DVI & HDMI 1.3 standards

Audio Input Audio OutputInput 6 Stereo Audio for line audio

2 MIC audioOutput Stereo audio for line audio

2x10W@8 amplifi er Input Connector 4 RCA female connector for YPbPr

C-Video & S-Video audio 4 3.5mm jack for VGA audio HDMI for HDMI embedded audio

Output Connector RCA connectorAmplifi er connector

Audio Input Impedance

>10k Audio Output Impedance

50

Audio GeneralStereo Channel Separation

>80dB @1KHz CMRR >90dB @20Hz to 20K Hz

Frequency Response

20Hz~20K Hz

Control PartsControl/Remote IR remote, Buttons & RS-232, TCP/IP Pin Confi gurations 2 = TX, 3 = RX, 5 = GNDGeneralTemperature -20 ~ +70C Humidity 10% ~ 90%Power Supply 100VAC ~ 240VAC, 50/60Hz Power Consumption 65WCase Dimension 19 x 1.75x 9.25 (inches) (WXHXD) Product Weight 7 lbs

3

FRONT AND REAR PANEL

FRONT PANEL

(1) Power indicator LED. It will display red when the unit is connected to power. (2) IR receive sensor for IR remote control.(3) Input Signal source type LED status.(4) Video signal source type selection buttons. VIDEO source type (HDMI, VGA, Component Composite and or S-Video.)(5) Signal source channel selection buttons.(6) Resolution selection buttons. 1024768, 1280x720p, 1280800, 1360768, 19201080p.(7) MIC volume control buttons. MUTE for mute MIC volume, for MIC volume up, for MIC volume down, loop controlling.(8) Line volume control buttons. MUTE for mute line volume, for line volume up, for line volume down, loop controlling.

REAR PANEL

(1) Two RCA connectors for stereo audio output, one VGA output, one HDMI output with audio embedded, one HDBASE-T for HDMI extending (works with ANI-402R) included.

(2) Four VGA connectors for VGA inputs.(3) Four HDMI connectors for HDMI inputs.(4) Four 3.5mm stereo audio connectors for VGA audio inputs.(5) One Component video input (Y/Pb/Pr) two composite video inputs and one S-Video input, two sets stereo analog audio input.(6) One RS232 port for series control, one USB port for fi rmware update. (7) Two MIC connectors: MIC with pre-amplifi cation, LINE for audio direct input. One TCP/IP port for network control.(8) Amplifi er with 2x10W@8 output.(9) Connector for POWER.(10) Grounding connection.

4

1 3 5 6 7 8

2 4

1 2 5 6 8

310 4 7 9

VIDEO/AUDIO DESCRIPTION

Below are the detailed descriptions of inputs and outputs.

COMPOSITE VIDEO AND S-VIDEO INPUTSupports PAL/SECAM/NTSCChangeable aspect ratio. (Full-screen, wide screen, 4:3)Color RGB adjustable

COMPONENT INPUTInput

ResolutionDisplay Parameter

Frame Frequency

Frame Frequency

Frame Frequency

720x480I 2:1 525 15.75 60 4:3720x480P 1:1 525 31.5 60 4:3720x576I 2:1 625 15.625 50 4:3720x576P 1:1 625 31.25 50 4:31280x720P 1:1 750 45 60 16:91280x720P 1:1 750 37.50 50 16:91920x1080I 2:1 1125 28.125 50 16:91920x1080I 2:1 1125 33.75 60 16:91920x1080I 2:1 1250 31.25 50 16:91920x1080P 1:1 1250 62.5 50 16:91920x1080P 1:1 1250 67.5 50 16:9The bandwidth is up to 170MHz.

Changeable aspect ratio. (Full-screen, wide screen, 4:3, auto-adjust)Supports HDTV input.

VGA INPUTThe VGA resolution is VESA standard, supporting:

No. Resolution No. Resolution1 720400@70 Hz 8 1024768@70 Hz2 640480@60 Hz 9 1024768@75 Hz3 640480@72 Hz 10 12807684 800600@60 Hz 11 12801024@75 Hz5 800600@72 Hz 12 1360768@60Hz6 800600@75 Hz 13 192010807 1024768@60 Hz

Bandwidth up to 375MHz. Adjustable Audio bass & treble Changeable aspect ratio. (Full-screen, 4:3)

5

VIDEO/AUDIO DESCRIPTION CONTD

HDMI INPUTHDMI resolution support:

No. Resolution No. Resolution1 640480@60 Hz 9 1024768@70 Hz2 640480@72 Hz 10 1024768@75 Hz3 640480@75 Hz 11 12801024@75 Hz4 800600@56 Hz 12 1280720P5 800600@60 Hz 13 13607686 800600@72 Hz 14 19205407 800600@75 Hz 15 19201080I8 1024768@60 Hz 16 19201080P

Digital embedded audio decoding. Changeable aspect ratio. (Full-screen, wide screen, 4:3, auto-adjust)Supports HDCP1.3, compatible with DVI signal

AUDIO INPUT/OUTPUT2 pairs of Left & Right stereo analog audio input4 VGA audio inputs2 MIC audio inputs2x10W@8 amplifi er outputLeft & Right stereo audio outputHDMI embedded audio.Volume/Bass/Treble adjustableAudio status presets, changeable scene mode

6

OSD OPERATION (ON-SCREEN-DISPLAY)

The VMTX-12P-HDMI provides a nice OSD operation menu, with various functions and language. The operation introduction is:

PICTURE SETTINGThe fi rst icon from left of OSD menu is to set the picture parameters. It includes the pictures mode preset, color temperature, contrast, brightness, hue, saturation, sharpness, scale, VGA setting and Advance picture adjust.

Some parameters are only available on certain inputs. For example: VGA setting can be set only with VGA input.

The Advance Picture Adjust can set the Digital Noise Reduction, dynamic color, skin tone and Adaptive Luma adjustment function on or off. DNR is recommended to be set to ON as it makes the output image clear and smooth.

Figure 1: OSD Display

AUDIO SETTINGThe Second icon from left of OSD menu is to set the audio/sound parameters. It includes the sound effect preset, bass, treble, balance, scene mode, surround and smart volume setting. Some parameters are only available depending on the input type.

Figure 2: OSD Sound Effect

7

OSD OPERATION (ON-SCREEN-DISPLAY) CONTD

SYSTEM SETTINGThe Third icon from left of OSD menu is the System Setting. It includes the OSD language setting, audio listen only, and freeze output picture etc.

Figure 3: OSD System Setting

8

IR REMOTE DESCRIPTION

REMOTE OPERATION

9

Menu/Volume MUTE for line and MIC audio mute.

Source Select 12 Input Channels:

4 HDMI4 VGA2 Composite Video1 S-Video1 Component

Line Volume Active when not in MENU

MIC Volume Active when not in MENU

Direction and OK, these buttons are available only in MENU mode.

Output Resolution 720P: 1280x7201080P: 1920x1080XGA: 1024x768WXGA: 1280x800HD: 1360x768

RS-232 CABLE PINS USED

1. Transmission Rate: 9600 bps2. Data Format: 8 data bits, No parity , 1 start bit, and 1 stop bit3. Flowing Control: NoneAlso known as 9600,8,n,1

10

RS-232 CONTROL COMMAND INTRODUCTION

Note:1: The letter inside the bracket [ ] is the variable code, which is changeable.2: The bracket [ ] is not part of the command.3: Any dot . after the letters is part of the command.

Example 1:Switch the Input 2 to the line out. RS-232 command: [2A1.]Example 2:Turn up the volume on line audio. RS-232 command: [603%]Example 3:Preset the MIC volume to 21 degree. RS-232 command: [521%]Example 4:Check the status of Zoom function [0608%]To cycle thru the Zoom functions, send the command repeatedly [0608%][0608%]

COMMUNICATION PROTOCOL:Command

(ASCII) Function DescriptionFeed back

(example) (ASCII)0600% MUTE Line LINE Mute On0601% UnMute Line LINE Mute Off0602% Audio turn up LINE Volume: XX0603% Audio turn down LINE Volume: XX0604% Lock the front panel button Panel Locked0605% Unlock the front panel button Panel UnLocked01XX% Preset the volume. The XX is ranging from 00 to 99 Volume: XX02XX% Preset the brightness. The XX is ranging from 00 to 99 Brightness: XX03XX% Preset the contrast. The XX is ranging from 00 to 99 Contrast: XX04XX% Preset the saturation. The XX is ranging from 00 to 99 Saturation: XX05XX% Preset the sharpness. The XX is ranging from 00 to 07 Sharpness: XX0606% Auto-adjust the input parameter(VGA only) Adjustment0607% Auto-adjust the color temperature Color Temp: XX0608% ZOOM the image, set the aspect ratio Aspect Ratio: XX0609% OK, for OSD selection OK0610% Left of OSD Left0611% Right of OSD Right0612% Up of OSD Up0613% Down of OSD Down0614% Set the picture mode Picture Mode : XX0615% Sound Mode Sound Mode: XX0616% MENU of OSD MENU0617% Command to reset to factory defaults Factory reset0618% Change the resolution to 1360X768 HD Resolution: HD 1360X7680626% Change the resolution to 1024X768 XGA Resolution: XGA 1024X7680627% Change the resolution to 1280X720 720P Resolution: 720P 1280X7200628% Change the resolution to 1280X800 WXGA Resolution: WXGA 1280X8000629% Change the resolution to 1920X1080 1080P Resolution: 1080P 1920X1080

11

RS-232 CONTROL COMMAND INTRODUCTION CONTD

0630% Check the volume level LINE Volume: XX/MIC Volume: XX0631% Check the input source Source: XXXXXX0632% Check the output resolution Resolution: XXXXXXXX0633% Check the image mode Picture Mode : XX0634% Check the audio mode Sound Mode: XX0635% Check the image aspec ratio Aspect Ratio: XX0636% Check the brightness Brightness: XX0637% Check the contrast Contrast: XX0638% Check the saturation Saturation: XX0639% Check the sharpness Sharpness: XX0640% Check the color temperature Color Temp: XX0644% OSD CHANNEL display enabled OSD Source: Display0646% Volume Bar display enabled Volume Bar: Display0647% Volume Bar display disabled Volume Bar: No Display0648% Digital audio (HDMI and SPDIF) output enabled Digital Sound Ouput: Enabled0649% Shield digital audio (HDMI and SPDIF) output Digital Sound Ouput: Disable0650% Check OSD CHANNEL display status OSD Source: Display0651% Check Volume Bar display status Volume Bar: Display0652% Check Digital audio output status Digital Sound Ouput: Enabled0655% Freeze output image Freeze: Enabled0656% Cancel the freezing of output image Freeze: Disable0698% Firmware update0699% Check Current Firmware Version0701% Switching to HDMI1 input Source: HDMI 10702% Switching to HDMI2 input Source: HDMI 20703% Switching to HDMI3 input Source: HDMI 30704% Switching to HDMI4 input Source: HDMI 40705% Switching to VGA1 input Source: VGA10706% Switching to VGA2 input Source: VGA20707% Switching to VGA3 input Source: VGA30708% Switching to VGA4 input Source: VGA40709% Switching to composite video AV1 input Source: CVIDEO10710% Switching to YPbPr input Source: YPbPr0711% Switching to S-Video input Source: SVIDEO0712% Switching to composite video AV2 input Source: CVIDEO20720% Mute Line and MIC LINE Mute On/MIC Mute On0721% UnMute Line and MIC LINE Mute Off/MIC Mute Off0722% MUTE MIC MIC Mute On0723% UnMute MIC MIC Mute Off0724% MIC volume turn up MIC Volume: XX0725% MIC volume turn down MIC Volume: XX08XX% Preset MIC volume. The XX is ranging from 00 to 99 MIC Volume: XX

12

TCP/IP CONTROLLING

The TP port of VMTX-12P-HDMI is used for TCP/IP control. Below is the introduction of TCP/IP control. The VMTX-12P-HDMI does not have a build-in webserver for control. The TCP/IP connection requires you either send comments manually or from a third-party controller.

IP CONFIGURATION1) Connect a computer to the TP port, set its IP to the same IP section as the default IP of VMTX-12P-HDMI (192.168.0.178).

Figure 4: TCP/IP Setup

2) Enter 192.168.0.178 in your web browser, you should see the LOGIN page.

Figure 5: TCP/IP Login Screen

3) Enter the password 88888, you will be presented with IPort Confi guration Web Server page. From this page, you can manage system settings like IP address, IP reset, PW reset etc. See Figure 6: TCP/IP IPort Confi guration Web ServerNote: Serial confi guration is fi xed and cannot be changed.

Figure 6: TCP/IP IPort Confi guration Web Server13

Same IP section but cannot be 192.168.0.178

TCP/IP CONTROLLING CONTD

After confi guration, reset the device, then you can use the new IP address for controlling.a) Connection and Command Control

1) Connect a computer and VMTX-12P-HDMI to the same network. Open the NET software (or any other TCP/IP communication software) and create a connection, enter the IP address and port of VMTX-12P-HDMI (default IP: 192.168.0.178, port:4001):

Figure 7: Connection and Command Control

2) After successful connection; you can enter commands to control the VMTX-12P-HDMI.

Figure 8: commands to control via TCP/IP

14

FIRMWARE UPDATING / SYSTEM DIAGRAM

FIRMWARE UPDATINGThe VMTX-12P-HDMI supports fi rmware fi eld-updating by USB fl ash disk. Note: VMTX-12P-HDMIUpdateFile.bin fi le is provided by A-NeuVideo engineering department and is not available as a public download.

The procedure is as follows:

1: Copy the fi le VMTX-12P-HDMIUpdateFile.bin to a USB fl ash disk.

2: Plug the USB fl ash disk into the USB port on the VMTX-12P-HDMI.

3: Pressing the button HDMI on the front panel for 6 seconds or sending RS-232 command 0698% for updating, then press the button OK on the remote or send RS-232 command 0609% to confi rm update. The VMTX-12P-HDMI will capture the new fi rmware from USB fl ash disk.

4: After updating fi nish, reboot and send the command 0617% to reset to factory settings.

5: After reset, reboot again.

SYSTEM DIAGRAM

15

16

END OF DOCUMENT

TERMS AND CONDITIONS OF USE

PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER KVM SWITCH TECH, INC (COLLECTIVELY, THE PRODUCT). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions. If you do not agree to these Terms and Conditions, do not use the Product and return the Product to KVM SWITCH TECH, Inc. at the return address set forth on the Products packing label at your expense. KVM SWITCH TECH, Inc. may modify these Terms and Conditions at anytime, without notice to you.

RESTRICTIONS ON USE OF THE PRODUCTIt is your responsibility to read and understand the installation and operation instructions, both verbal and in writing, provided to you with respect to the Product. You are authorized to use the Product solely in connection with such instructions. Any use of the Product not in accordance with such instructions shall void any warranty pertaining to the Product. Any and all damages that may occur in the use of the Product that is not strictly in accordance with such instructions shall be borne by you and you agree to indemnify and hold harmless KVM SWITCH TECH, Inc. from and against any such damage.

The Product is protected by certain intellectual property rights owned by or licensed to KVM SWITCH TECH. Any intellectual property rights pertaining to the Product are licensed to you by KVM SWITCH TECH, Inc. and/or its affi liates, including any manufacturers or distributors of the Product (collectively, KVM SWITCH TECH) for your personal use only, provided that you do not change or delete any proprietary notices that may be provided with respect to the Product.

The Product is sold to you and any use of any associated intellectual property is deemed to be licensed to you by KVM SWITCH TECH for your personal use only. KVM SWITCH TECH does not transfer either the title or the intellectual property rights to the Product and KVM SWITCH TECH retains full and complete title to the intellectual property rights therein. All trademarks and logos are owned by KVM SWITCH TECH or its licensors and providers of the Product, and you may not copy or use them in any manner without the prior written consent of KVM SWITCH TECH, which consent may be withheld at the sole discretion of KVM SWITCH TECH.

The functionality and usability of the Product is controlled by KVM SWITCH TECH, Inc. from its offi ces within the State of Texas, United States of America. KVM SWITCH TECH makes no representation that materials pertaining to the Product are appropriate or available for use in other locations other than the shipping address you provided with respect thereto. You are advised that the Product may be subject to U.S. export controls. Disclaimers and Limitation of Liability

KVM SWITCH TECH may change or modify the Product at any time, from time to time.

THE PRODUCT IS PROVIDED AS IS AND WITHOUT WARRANTIES OF ANY KIND EITHER EXPRESS OR IMPLIED. KVM SWITCH TECH DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE PRODUCTS CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE.

KVM SWITCH TECH has no duty or policy to update any information or statements pertaining to the Product and, therefore, such information or statements should not be relied upon as being current as of the date you use the Product. Moreover, any portion of the materials pertaining to the Product may include technical inaccuracies or typographical errors. Changes may be made from time to time without notice with respect to the Product.

TO THE FULLEST EXTENT PERMISSABLE PURSUANT TO APPLICABLE LAW, KVM SWITCH TECH DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. KVM SWITCH TECH DOES NOT WARRANT THE ACCURACY, COMPLETENESS OR USEFULNESS OF ANY INFORMATION WITH RESPECT TO THE PRODUCT. KVM SWITCH TECH DOES NOT WARRANT THAT THE FUNCTIONS PERTAINING TO THE PRODUCT WILL BE ERROR-FREE, THAT DEFECTS WITH RESPECT TO THE PRODUCT WILL BE CORRECTED, OR THAT THE MATERIALS PERTAINING THERETO ARE FREE OF DEFECTS OR OTHER HARMFUL COMPONENTS. KVM SWITCH TECH WILL USE ITS REASONABLE EFFORTS TO CORRECT ANY DEFECTS IN THE PRODUCT UPON TIMELY WRITTEN NOTICE FROM YOU NOT TO EXCEED 10 BUSINESS DAYS AFTER RECEIPT BY YOU OF THE PRODUCT, BUT YOU (AND NOT KVM SWITCH TECH) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR AND CORRECTION THAT WAS CAUSED BY YOU UNLESS OTHERWISE AGREED TO IN A SEPARATE WRITING BY KVM SWITCH TECH.

UNDER NO CIRCUMSTANCES, INCLUDING, BUT NOT LIMITED TO, NEGLIGENCE, SHALL KVM SWITCH TECH BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE USE OF, OR THE INABILITY TO USE THE PRODUCT IN ACCORDANCE WITH ITS SPECIFICATIONS, EVEN IF KVM SWITCH TECH OR ITS REPRESENTATIVES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL KVM SWITCHS TOTAL LIABILITY TO YOU FROM ALL DAMAGES, LOSSES, AND CAUSES OF ACTION (WHETHER IN CONTRACT, OR OTHERWISE) EXCEED THE AMOUNT YOU PAID TO KVM SWITCH TECH, IF ANY, FOR THE PRODUCT.