192.168.1.10 Username: user Password: user - Thorbroadcast · 192.168.1.xx , The xx could be set...
Transcript of 192.168.1.10 Username: user Password: user - Thorbroadcast · 192.168.1.xx , The xx could be set...
Thor Fiber Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
The IP Address for H-HDMI-RF-PETIT is
192.168.1.10
The PC NIC Etherent card IP Address need to be set up to the same subnet as our modulator 192.168.1.xx , The xx could be set betwwen 1 and 254, but not 10 becauseDuplicate IP is not allowed on the networkThe PC NIC Ethernet card IP Address needs to be set up on the same subnet as our modulator
192.168.1.xx ,The xx could be set betwwen 1 and 254, but not 10 because
Duplicate IP is not allowed on the network
Username: userPassword: user
Equipment default IP address – 192.168.1.10
Thor Fiber Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
Network Setup :
1) Go to “Windows Start”
2) Go to Windows Settings
3) Go to “Network & Internet”
Equipment default IP address – 192.168.1.10
Thor Fiber Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
4) Go to “Ethernet” on the Left side of the Menu
5) Go to “Change adapter options”
Equipment default IP address – 192.168.1.10
Thor Fiber Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
6) Double click on the Ethernet Source or Right Click and Select “Properties”
7) Open Properties
Equipment default IP address – 192.168.1.10
Thor Fiber Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
8) Go to “Internet Protocol Version 4 (TCP/IPv4)”
9) Go to “Properties”
10) Go to “Use the following IP address”
Equipment default IP address – 192.168.1.10
Thor Fiber Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
11) Set IP address
IP address : 192.168.0.100
Subnet mask: 255.255.255.0
12) Save All the Settings
13 ) Open Internet browser, Enter the IP address - 192.168.1.10
192.168.1.10
Username: user Password: user