1908

download 1908

of 52

  • date post

    29-Nov-2015
  • Category

    Documents

  • view

    32
  • download

    2

Embed Size (px)

description

User manual andInstallation instructionsRIVA COMPACTModels:M90E.24SM90E.28SM90E.32S

Transcript of 1908

  • User manual andInstallation instructionsRIVA COMPACTModels:

    M90E.24SM90E.28SM90E.32S

  • Congratulations on your choice.Your boiler is electronically controlled and has electronic ignition.The materials it is made of and the control systems it is equipped with give you safety, a highlevel of comfort and energy savings to allow you to get the greatest benefit out of independentheating.

    Remember that...n Themanualmust be read thoroughly, sothat youwill be able to use the boiler in a safeand sensible way;must be carefully kept. It may be necessaryfor reference in the future.

    n First lighting up must be carried out bycompetent and responsible engineer.

    n Themanufacturer disclaimall liability forany translations of the present manual fromwhich incorrect interpretation may occur;cannot be held responsible for non---observ-ance of instructions contained in thismanualor for the consequences of any procedurenot specifically described.

    Using the boiler...n Before lighting the boiler, you are ad-vised to have a professionally qualified per-son check that the installation of the gassupply:--- is gas--- tight;--- is of the correct gauge for the flow to theboiler;--- is fitted with all the safety and control de-vices required by the current Regulations;

    Ensure that the installer has connected thepressure relief valve outlet to a drain pipe.The manufacturers are not responsible fordamage caused by opening of the pressurerelief valve and consequent escape of water,if not connected correctly to the drain.

    n On detecting the smell of gas--- dont operate any electrical switches, thetelephone or any device that may producesparks;--- open the windows and doors at once tocreate a draught of air which will purge thearea;--- shut off the gas cocks;--- get the assistance of a qualified person.

    n Donot touch the appliancewith parts ofthe body that are wet or damp and/or barefeet.

    n In case of structural work or mainten-ance near the exhaust duct and/or fume ex-haust devices or their attachments, turn offthe appliance. On completion of the work,have a professionally qualified person checktheir efficiency.

    n Repairs (under guarantee) must be car-ried out only by an approved engineer, usinggenuine spare parts. Thus do no more thanswitching off the boiler yourself (see the in-structions).

    n Your boiler allows heating up of water toa temperature less than boiling point;--- must be connected to a central heatingsystem and/or a hot water supply system,compatible with its performance and output;--- can be used only for those purposes forwhich it has been specially designed;--- must not be touched by children or bythose unfamiliar with its operation;--- must not be exposed to weather condi-tions.

  • Safe handling ofsubstances

    Biasi products are manufactured in accordancewith ISO 9000 and do not, and will not, contain anyhazardous materials or substances such as as-bestos, mercury or C.F.C.s.The appliance packaging does not contain anysubstances,whichmaybe considered a hazard tohealth.

    Combustion chamber panelsMaterial: mineral fibersKnown hazards --- Some people can suffer red-dening and itching of the skin. Fibre entry into theeye will cause foreign body irritation, which cancause severe irritation to people wearing contactlenses. Irritation to respiratory tract.Precautions --- Dust goggles will protect eyes.People with a history of skin complaints may beparticularly susceptible to irritation. High dust le-

    vels are only likely to arise following harsh ab-rasion. In general, normal handling and use willnot present high risk, follow good hygiene prac-tices,washhandsbefore, touching eyes, consum-ing food, drinking or using the toilet.First aid --- Medical attention must be sought fol-lowing eye contact or prolonged reddening of theskin.

    Thermostat / Temperature gaugeDescription --- Sealed phial and capillary contain-ing liquid.Known hazards --- irritating to skin, eyes andthroat. Vapour is harmful. Inflammable --- do notextinguish with water.Precautions --- Do not incinerate. Avoid contactwith broken/leaking phials. Do not purposelypuncture.First aid medical attention must be sought follow-ing eyes/skin contact, wash with clean water.

    Appliance category II2H3+ Gas G20 20 mbar, G30 29 mbar, G31 37 mbarCountry of destination: United Kingdom (GB) Irealnd (IE)This appliance conformswith the EEC directive 90/396 and, consequently, it has the right tomakeuseof the brand nameMoreover, theapplianceconformswith theEECdirective87/308 relative to theprevention andelimina-tion of radio disturbances.The appliance is built to comply with the regulation now in force regarding gas appliances safety andthe European regulation now in force relative to safety of household and similar electrical appliances.The manufacturer, in the continuous pocess to improve his products, reserves the right to modify thedata expressed in the present documentation at any time and without prior notice.The present documentation is an informative support and it cannot be considered as a contract to-wards third parties.

  • Boiler installation and commissioning tipsn The installation must be carried out bya qualified personwhowill be responsible forobserving the current Regulations.

    Installing the boiler...n Do not forget to remove the transit capsand plugs from the boiler connections theseare fitted to every boiler.

    n Keep the boiler clear of dust during in-stallation and in particular do not allow anydust or debris to enter the top of the boilerwhere the flue connection is made. It is rec-ommended that youput adust sheet over thetop of the boiler until you are ready to makethe flue connection.

    n Because every boiler is fired and testedlive at the factory, a small amount of water re-mains within the boiler. It is possible for thiswater to initially cause the pump to seize. It istherefore recommended that the pump rotorbe manually turned to free its rotation beforeturning the boiler on.

    n Remember to release the auto air purgebefore filling theboiler. See the instructions toidentify the location of this device.

    n Do not remove the cap of the pressuretest points of the air switch (top left side of theboiler).

    n You are strongly advised to flush out thesystem both cold and hot in order to removesystem and installation debris.

    n It is also sensible to initially fire and com-mission the boiler before connecting any ex-ternal controls suchas a room thermostat. Bythis method if you have a subsequent prob-lem following the addition of an external con-trol you can eliminate the boiler from yourfault analysis.

    n Do not forget to range rate the boiler tosuit the system requirements. This pro-cedure is covered in the commissioning sec-tion of the installation manual.

    n If the boiler is fitted with a digital pro-grammer, when setting the times for auto-matic operation, remember that for everyON time theremustbean OFF time to fol-low and that on every occasion you enter atime you must also indicate which days thatyou want the boiler to follow the timed set-tings.

    n Some products incorporate an anti cycl-ing time delay. It is normal when first switch-ing the boiler on for the boiler to operate onheating for a few seconds then switch off.After 3---4 minutes has elapsed the boiler willthen re ignite and operate perfectly normally.The ignition delay cycle does not preventnormal operation of the boiler to provided.h.w.

    n If you are in any doubts as to the installa-tion or operation of the boiler please read theinstruction manuals thoroughly and then ifnecessary contact Biasi UK for advice andassistance.

    Please remember that if you are in any doubt about the installation of this product you can contact ourTechnical Helpline on tel. 0121 506 1350

  • TABLE OF CONTENTS

    1 Appliance description 1. . . . . . . . . .1.1 Overview 1. . . . . . . . . . . . . . . . . . . . . .1.2 Control panel 1. . . . . . . . . . . . . . . . . .1.3 Isolation valves 1. . . . . . . . . . . . . . . . .1.4 Technical data 1. . . . . . . . . . . . . . . . .

    2 Instructions for use 2. . . . . . . . . . . .2.1 Warnings 2. . . . . . . . . . . . . . . . . . . . . .2.2 Refilling procedure 2. . . . . . . . . . . . . .2.3 Ignition 3. . . . . . . . . . . . . . . . . . . . . . . .2.4 C.h. circuit temperature 3. . . . . . . . . .

    2.5 D.h.w. temperature 4. . . . . . . . . . . . . .2.6 Extinguishing 4. . . . . . . . . . . . . . . . . .2.7 Built in time switch A 5. . . . . . . . . . . .2.8 Built in time switch B 7. . . . . . . . . . . .

    3 Useful advice 9. . . . . . . . . . . . . . . . .3.1 Central heating 9. . . . . . . . . . . . . . . . .3.2 Frost protection 9. . . . . . . . . . . . . . . .3.3 Periodic maintenance 9. . . . . . . . . . .3.4 External cleaning 9. . . . . . . . . . . . . . .3.5 Operational faults 9. . . . . . . . . . . . . . .

    4 Technical information 11. . . . . . . . . .4.1 Overview 11. . . . . . . . . . . . . . . . . . . . . .4.2 Main diagram 12. . . . . . . . . . . . . . . . . .4.3 Hydraulic specifications 13. . . . . . . . .4.4 Expansion vessel 13. . . . . . . . . . . . . . .4.5 Technical data M90E.24S 14. . . . . . . .4.6 Technical data M90E.28S 16. . . . . . . .4.7 Technical data M90E.32S 18. . . . . . . .

    5 General requirements 20. . . . . . . . . .5.1 Related documents 20. . . . . . . . . . . . .5.2 Location of appliance 20. . . . . . . . . . .5.3 Flue system 20. . . . . . . . . . . . . . . . . . . .5.4 Gas supply 21. . . . . . . . . . . . . . . . . . . .5.5 Air supply 21. . . . . . . . . . . . . . . . . . . . .5.6 Ventilation 21. . . . . . . . . . . . . . . . . . . . .5.7 Water circulation (c.h.) 21. . . . . . . . . . .5.8 Domestic water 22. . . . . . . . . . . . . . . . .5.9 Water treatment 22. . . . . . . . . . . . . . . .5.10 Electrical supply 22. . . . . . . . . . .