17db07 Mb35 Analog Sw Upload

1Eğitim & Servis Geliştirme Müdürlüğü / Hazırlayan: Mustafa Özer

Vestel Customer Technical

Support Department

ANALOG SOFTWARE

UPLOD TRAINING

17MB35 LCD TV Mustafa ÖZER-ErcanÖZ

2008


17DB07 Module 03

17DB07-6 Đnstallation 04 - 26

Uploading New Software 28 - 47

Checking SW version 48

Subjects:


V20371033MD.ASY.17DB07-DEBUG BOARD(MB30)

17DB07 MODULE

Code info of the 17DB07 , You can order from web page.


17DB07 INSTALLATION

USB Connection

Socket

SCART connection

socket

HDMI Socket VGA Socket

Connection sockets description of 17DB07 Module.

Uploading info leds


Necessary programs:

Open the MB35 folderon the “Desktop”


Đnstallation of 17DB07-6 Module on the PC.

Firstly, you must unzipping “DB07-6 DRIVER” file.


Run the Setup.Exe program.

Setup.Exe


Steps of the Setup.Exe



You must choose this

option


Choose Continue Anyway option.


Finish first part with Close of the Setup.Exe


Desctop view, after first part installation of Setup.Exe


Starting second part of Setup.Exe



option



Finish second part with Finish of the Setup.Exe



option

Starting third part of Setup.Exe



option



Finish third part with Finish of the Setup.Exe


Desktop view, after third part installation of Setup.Exe When you connect, DB07 module to USB input of the PC, it will automatically recognize.


DB07 Module Connection to PC

After installation Setup.Exe, connect the DB07 Module to PC.


Software Uploading via 17DB07

Preparing new software Uploading


17MB35 Main Board

SCART 1


17DB07 with PC and Main Board connection diagram

USB Connection Cable

SCARTConnection Cable


17MB35

17DB07 SCART-1

!..Attention, You have to do this connection while TV Power OFF.



Đt is possible to uploading new analog software via Scart-1



Checking old Software Version of 17MB35 before Uploading

MENU,4,7,2,5

Analog TV Menu

Service Menu

Viewing OLD software version on servis menu


Uploading New Software

Sofrware Uploading with 17DB07



Run the ISP_ToolV4.3.9.9 .exe in the MB35 folder.


Click Connect icon and if you see above message, it means DB07 module is connected , than you can click OK



You must choose your new software file with Read icon.



Choose new software and click Open



New Software selected.



Click Auto icon and you must do disable ReConnect – Blank – Verifyoptions.



Click Run for starting Upload new software

New software is loading now



Continue uploading new software.



End of the uploading, you must see Pass message.



St-By Blue Led will be blinking short time end of SW uploading. When Blue led light continue, it means uploading is succeed. After this case you can turn OFF the TV and remove all connections



You must again turn ON TV and enter “Service Mode”

6. Preset4. All Adj.’ click right arrow on the RC.

Click “TV” ket on the RC for exit “Service Mode”

You must turn OFF and again turn ON via POWER Switch of TV.

Eeprom RESET operation


Checking New Software version and EEPROM Reset operetion

MENU, 4,7,2,5

Analog TV Menu

Service Menu

Viewing NEW software version on servis menu

17db07 Mb35 Analog Sw Upload

Documents

Transcript of 17db07 Mb35 Analog Sw Upload