1756 ControlLogix Chassis Specifications Technical Data

1756 ControlLogix Chassis Specifications1756 ControlLogix Chassis Specifications Catalog Numbers 1756-A4/B, 1756-A4K/B, 1756-A4/C, 1756-A4K/C, 1756-A7/B, 1756-A7K/B, 1756-A7/C, 1756-A7K/C, 1756-A10/B, 1756-A10K/B, 1756-A10/C, 1756-A10K/C, 1756-A13/B, 1756-A13K/B, 1756-A13/C, 1756-A13K/C, 1756-A17/B, 1756-A17K/B, 1756-A17/C, 1756-A17K/C, 1756-A4LXT/B, 1756-A5XT/B, 1756-A7LXT/B, 1756-A7XT/B, 1756-A7XT/C, 1756-A10XT/C
The ControlLogix® system is a modular system that requires a 1756 ControlLogix chassis. The chassis are designed for only horizontal back-panel mounting. Place any module into any slot. The backplane provides a high-speed communication path between modules.
AutoCAD product drawings are available at http://www.rockwellautomation.com/global/support/drawings.page.
Topic Page
ControlLogix-XT Chassis Specifications 4
Spacing Requirements 6
Series B ControlLogix Chassis with Standard and Slim Power Supply Mounting Dimensions 8
Series C ControlLogix Chassis with Standard and Slim Power Supply Mounting Dimensions 12
Series B ControlLogix Chassis with Redundant Power Supply Mounting Dimensions 15
Series C ControlLogix Chassis with Redundant Power Supply Mounting Dimensions 19
ControlLogix Chassis Accessories 20
The chassis backplane provides a high-speed communication path between modules and distributes power to each of the modules within the chassis.
Technical Specifications - ControlLogix Standard Chassis (Series B)
Attribute 1756-A4/B 1756-A7/B 1756-A10/B 1756-A13/B 1756-A17/B
Backplane current, chassis/slot max @ 1.2V DC 1.5 A/–
Backplane current, chassis/slot max @ 3.3V DC 4 A/4 A
Backplane current, chassis/slot max @ 24V DC 2.8 A/2.8 A
Power dissipation, max 4 W 4.5 W 5 W 5.4 W 6 W
Isolation voltage Determined by installed power supply and modules
Slots 4 7 10 13 17
Mounting method Only horizontal
Cabinet size (HxWxD), min 50.8 x 50.8 x 20.3 cm (20 x 20 x 8 in.)
50.8 x 60.9 x 20.3 cm (20 x 24 x 8 in.)
50.8 x 76.2 x 20.3 cm (20 x 30 x 8 in.)
60.9 x 76.2 x 20.3 cm (24 x 30 x 8 in.)
76.2 x 91.4 x 20.3 cm (30 x 36 x 8 in.)
Weight, approx 0.75 kg (1.7 lb) 1.10 kg (2.4 lb) 1.45 kg (3.2 lb) 1.90 kg (4.2 lb) 2.20 kg (4.8 lb)
Location Panel
Wire size Functional Earth Ground - 8.3 mm2 (8 AWG) solid or stranded copper wire rated at 90 °C (194 °F) or greater
Protective Earth Ground - 2.1 mm2 (14 AWG) solid or stranded copper wire rated at 90 °C (194 °F) or greater
North American temperature code T5
IEC temperature code T4 T5
Enclosure type rating None (open-style)
Technical Specifications - ControlLogix Standard Chassis (Series C)
Attribute 1756-A4/C 1756-A7/C 1756-A10/C 1756-A13/C 1756-A17/C
Backplane current, chassis/slot max @ 24V DC 2.8 A/2.8 A
Power dissipation, max 4 W 4.5 W 5 W 5.4 W 6 W
Slots 4 7 10 13 17
Mounting method Only horizontal
50.8 x 60.9 x 20.3 cm (20 x 24 x 8 in.)
50.8 x 76.2 x 20.3 cm (20 x 30 x 8 in.)
60.9 x 76.2 x 20.3 cm (24 x 30 x 8 in.)
76.2 x 91.4 x 20.3 cm (30 x 36 x 8 in.)
Location Panel
Wire size Functional earth ground - 8.3 mm2 (8 AWG) solid or stranded copper wire rated at 90 °C (194 °F) or greater
Protective earth ground - 2.1 mm2 (14 AWG) solid or stranded copper wire rated at 90 °C (194 °F) or greater
North American temperature code T4
IEC temperature code T4
2 Rockwell Automation Publication 1756-TD006F-EN-E - March 2017
1756 ControlLogix Chassis Specifications
Attribute 1756-A4/B, 1756-A7/B, 1756-A10/B, 1756-A13/B, 1756-A17/B
1756-A4/C, 1756-A7/C, 1756-A10/C, 1756-A13/C, 1756-A17/C
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
0…60 °C (32…140 °F) -25…+60 °C (-13…+140 °F)
Temperature, surrounding air 60 °C (140 °F)
Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…+85 °C (-40…+185 °F)
Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
5…95% noncondensing
2 g @ 10…500 Hz
Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
50 g 30 g
Radiated RF immunity IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 80…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz
Certifications - ControlLogix Standard Chassis
Certification(1)
(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-A4/B 1756-A7/B, 1756-A10/B, 1756-A13/B, 1756-A17/B 1756-A4/C, 1756-A7/C, 1756-A10/C, 1756-A13/C, 1756-A17/C
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CSA CSA Certified Process Control Equipment. See CSA File 54689.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File 69960.
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations.
CE
RCM Australian Radiocommunications Act, compliant with: EN 61000-6-4; Industrial Emissions
Ex
European Union 94/9/EC ATEX Directive, compliant with: • EN 60079-15; Potentially Explosive Atmospheres,
Protection “n” • EN 60079-0; General Requirements • II 3 G Ex nA IIC T4 Gc X
Protection “n” • EN 60079-0; General Requirements • II 3 G Ex nA IIC T5 Gc X
Protection “n” • EN 60079-0; General Requirements • II 3 G Ex nA IIC T4 Gc • DEMKO13ATEX1325026X
IECEx N/A
IECEx System, compliant with: • IEC 60079-15; Potentially Explosive Atmospheres,
Protection "n" • IEC 60079-0; General Requirements • II 3 G Ex nA IIC T4 Gc • IECExUL14.0008X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
Rockwell Automation Publication 1756-TD006F-EN-E - March 2017 3
Technical Specifications - ControlLogix-XT Chassis
Backplane current, chassis/slot max @ 5.1V DC 10 A/6 A 15 A/6 A
Backplane current, chassis/slot max @ 24V DC 2 A/2 A 2.8 A/2.8 A
Power dissipation, max 3.7 W 4.1 W 4.4 W 4.5 W 5.0 W
Slots 4 7 5 7 10
Mounting method Horizontal only
50.8 x 60.9 x 20.3 cm (20 x 24 x 8 in.)
50.8 x 76.2 x 20.3 cm (20 x 30 x 8 in.)
50.8 x 60.9 x 20.3 cm (20 x 24 x 8 in.)
50.8 x 85.75 x 20.3 cm (20 x 33.75 x 8 in.)
Location Panel
Wire size Functional earth ground - 8.3 mm2 (8 AWG) solid or stranded copper wire rated at 90 °C (194 °F) or greater
Protective earth ground - 2.1 mm2 (14 AWG) solid or stranded copper wire rated at 90 °C (194 °F) or greater
North American temperature code T5 T4A T4
IEC temperature code T5 T4
Enclosure type rating None (open-style)
Environmental Specifications - ControlLogix-XT Chassis
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-25…+60 °C (-13…+140 °F) -25…+70 °C (-13…+158 °F)
Temperature, surrounding air 60 °C (140 °F) 70 °C (158 °F)
Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…+85 °C (-40…+185 °F)
Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat)
5…95% noncondensing
IEC 60068-2-6 (Test Fc, Operating) 2 g @ 10…500 Hz
Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock)
30 g
50 g 30 g
Radiated RF immunity IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 80…2000 MHz 10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz 3V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz
4 Rockwell Automation Publication 1756-TD006F-EN-E - March 2017
Certification(1) 1756-A4LXT/B, 1756-A7LXT/B 1756-A5XT/B, 1756-A7XT/B, 1756-A7XT/C, 1756-A10XT/C
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations.
CE
RCM Australian Radiocommunications Act, compliant with:
EN 61000-6-4; Industrial Emissions
Ex
European Union 94/9/EC ATEX Directive, compliant with: • EN 60079-15; Potentially Explosive Atmospheres, Protection “n” • EN 60079-0; General Requirements • II 3 G Ex nA IIC T4 Gc X • DEMKO13ATEX1325026X
IECEx
IECEx System, compliant with: • IEC 60079-15; Potentially Explosive Atmospheres, Protection "n" • IEC 60079-0; General Requirements • II 3 G Ex nA IIC T5 Gc • IECExUL14.0008X
IECEx System, compliant with: • IEC 60079-15; Potentially Explosive Atmospheres, Protection "n" • IEC 60079-0; General Requirements • II 3 G Ex nA IIC T4 Gc • IECExUL14.0008X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
Spacing Requirements
When you mount a ControlLogix chassis with a standard power supply in an enclosure, follow these spacing requirements (series C chassis depicted).
IMPORTANT The 1756-CPR2 cable has a bend radius of 12.7 cm (5.0 in.). The chassis must have a minimum clearance of 12.7 cm (5.0 in.)
on the left side to route and connect the 1756-CPR2 cable. The redundant power supplies must have a minimum clearance of
12.7 cm (5.0 in.) below the supply to route and connect the 1756-CPR2 cable.
5.1 cm (2.0 in.)
7.7 cm (3.0 in.)
plus the width of
15.3 cm (6.0 in.) 10.2 cm (4.0 in.)
plus the width
of the power
When you mount a ControlLogix chassis with a redundant power supply and a chassis adapter in an enclosure, follow these spacing requirements (series C chassis depicted).
Series C chassis offer these features: • Improved slot guidelines • Improved ventilation • Stronger mounting tabs • Additional hole in mounting tab • Additional ground screw
15.3 cm (6.0 in.)
15.3 cm (6.0 in.)
15.3 cm (6.0 in.)
Series B ControlLogix Chassis with Standard and Slim Power Supply Mounting Dimensions
Dimensions are in cm (in.).
Chassis Common Dimensions
1.1 (0.433)
16.9
(6.65)
14.5
(5.71)
16.9
(6.65)
14.9
(5.87)
0.55
(0.217)
17.5 (6.89)
14.5 (5.70)
16.9 (6.65)
36.7 (14.47)
15.8 (6.22)
4.71 (1.85)
14.5 (5.70)
16.9 (6.65)
48.3 (19.02)
15.8 (6.22)
5.7 (2.25)
14.0 (5.51)
14.0 (5.51)
14.5 (5.70)
16.9 (6.65)
58.8 (23.13)
15.8 (6.22)
5.7 (2.25)
14.0 (5.51)
14.0 (5.51)
10.5 (4.13)
14.5 (5.70)
16.9 (6.65)
73.8 (29.04)
15.8 (6.22)
4.7 (1.85)14.0
(5.51) 14.0
11.3
(4.45)
14.55
(5.73)
49.88
(19.64)
15.8
(6.22)
Standard
Slim
Series C ControlLogix Chassis with Standard and Slim Power Supply Mounting Dimensions
1.1 (0.433)
16.9
(6.65)
14.5
(5.71)
16.9
(6.65)
14.9
(5.87)
0.55
(0.217)
11.3
(4.45)
14.55
(5.73)
14.48
(5.70)
23.01
(9.06)
15.8
(6.22)
26.26
(10.34)
7.0
(2.76)
4.71
(1.85)
16.9
(6.65)
Standard
Slim
11.3
(4.45)
14.5
(5.70)
16.9
(6.65)
33.51
(13.19)
15.8
(6.22)
17.5
(6.89)
14.55
(5.73)
4.71
(1.85)
36.76
(14.47)
Standard
Slim
14.48
(5.70)
16.9
(6.65)
73.76
(29.04)
15.8
(6.22)
4.71
(1.85)
14.0
(5.51)
14.0
(5.51)
13.25
(5.22)
13.25
(5.22)
14.55
(5.73)11.3
(4.45)
70.54
(27.76)
Series B ControlLogix Chassis with Redundant Power Supply Mounting Dimensions
Redundant Power Supplies
IMPORTANT The 1756-CPR2 cable has a bend radius of 12.7 cm (5.0 in.). The chassis must have a minimum clearance of 12.7 cm (5.0 in.) on
the left side to route and connect the 1756-CPR2 cable. The redundant power supplies must have a minimum clearance of
1.1 (0.433)
16.9
(6.65)
14.5
(5.71)
0.78
(0.31)
7.0 (2.76)
4.7 (1.85)
16.9 (6.65)
18.6 (7.32)
1756-A4LXT/B Chassis and Chassis Adapter
14.5 (5.70)
16.9 (6.65)
51.1 (20.12)
15.8 (6.22)
5.71 (2.25)
14.0 (5.51)
14.0 (5.51)
10.5 (4.13)
14.5 (5.70)
16.9 (6.65)
66.1 (26.02)
15.8 (6.22)
4.7 (1.85)14.0
(5.51) 14.0
14.5 (5.70)
16.9 (6.65)
42.1 (16.57)
15.8 (6.22)
7.3 (2.87)14.0
(5.51) 14.0
Series C ControlLogix Chassis with Redundant Power Supply Mounting Dimensions
Redundant Power Supplies
IMPORTANT The 1756-CPR2 cable has a bend radius of 12.7 cm (5.0 in.). The chassis must have a minimum clearance of 12.7 cm (5.0 in.)
on the left side to route and connect the 1756-CPR2 cable. The redundant power supplies must have a minimum clearance of
1.1 (0.433)
16.9
(6.65)
14.5
(5.71)
0.78
(0.31)
0.55
(0.217)
ControlLogix Chassis Accessories
Additional Resources These documents contain additional information concerning related products from Rockwell Automation.
You can view or download publications at http://www.rockwellautomation.com/literature/. To order paper copies of technical documentation, contact your local Allen-Bradley® distributor or Rockwell Automation sales representative.
Cat. No. Description
1756-N2 Slot filler module for empty slots in standard ControlLogix chassis
1756-N2XT Slot filler module for empty slots in ControlLogix-XT chassis
Resource Description
ControlLogix Selection Guide, publication 1756-SG001 Provides an overview of the ControlLogix system and its products.
ControlLogix Power Supplies Specifications Technical Data, publication 1756-TD005 Provides technical specifications for ControlLogix power supplies.
ControlLogix System User Manual, publication 1756-UM001 Provides information on how to install, configure, program, and use ControlLogix controllers.
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation® industrial system.
Product Certifications website, http://www.ab.com Provides declarations of conformity, certificates, and other certification details.
14.5 (5.70)
16.9 (6.65)
42.1 (16.57)
15.8 (6.22)
7.3 (2.87)
14.0 (5.51)
14.0 (5.51)
Allen-Bradley, ControlLogix, ControlLogix-XT, LISTEN. THINK. SOLVE, Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 1756-TD006F-EN-E - March 2017
Rockwell Automation Support Use the following resources to access support information.
Documentation Feedback Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the How Are We Doing? form at http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf.
Technical Support Center Knowledgebase Articles, How-to Videos, FAQs, Chat, User Forums, and Product Notification Updates.
www.rockwellautomation.com/knowledgebase
Local Technical Support Phone Numbers Locate the phone number for your country. www.rockwellautomation.com/global/support/get-support- now.page
Direct Dial Codes Find the Direct Dial Code for your product. Use the code to route your call directly to a technical support engineer.
www.rockwellautomation.com/global/support/direct- dial.page
www.rockwellautomation.com/literature
Product Compatibility and Download Center (PCDC)
Get help determining how products interact, check features and capabilities, and find associated firmware.
www.rockwellautomation.com/global/support/pcdc.page
Rockwell Otomasyon Ticaret A.., Kar Plaza Merkezi E Blok Kat:6 34752 çerenköy, stanbul, Tel: +90 (216) 5698400
Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Supersedes Publication 1756-TD006E-EN-E - October 2014 Copyright © 2017 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Spacing Requirements
Series B ControlLogix Chassis with Standard and Slim Power Supply Mounting Dimensions
Series C ControlLogix Chassis with Standard and Slim Power Supply Mounting Dimensions
Series B ControlLogix Chassis with Redundant Power Supply Mounting Dimensions
Series C ControlLogix Chassis with Redundant Power Supply Mounting Dimensions
ControlLogix Chassis Accessories
Introduction_Category Types
This tab summarizes Rockwell Automation Global Sales and Marketing preferred printing standards. It also provides guidance on whether a publication should be released as JIT (print on demand) or if it requires an RFQ for offset printing. Find your publication type in the first section below. Use the assigned Printing Category information to determine the standard print specifications for that document type. The Printing Categories are defined below the Publication Type section. Note there may be slightly different print specifications for the categories, depending on the region (EMEA or Americas). For more information on Global Sales and Marketing Printing Standards, see publication RA-CO004 in DocMan.
Publication Type and Print Category
Publication Type
JIT Spec. (See table below)
Description
AD
5
100
(press releases should not be checked into DocMan or printed)
AT
PP
A3
D1
Profile (Single Product or Service). NOTE: Application Solutions are to be assigned the AP pub type.
5
100
NA
Sales Promotion NOTE: Service profiles are to be assigned the PP pub type.
5
100
D5, D6
Technical Data
Presale / External
** Minimum order quantities on all JIT items are based on the publication length. **
Publication length
33 to 76 pages
Pre-sale / Marketing
All paper in this category is White Brightness, 90% or better. Opacity 90% or better
Category
A1
A2
A3
80# gloss cover, 80# gloss text
A4
A5
A6
A7
Category being deleted
A8
2 color text
Selection Guide
Post Sale / Technical Communication
B1
B3
B4
B5
Catalogs
Category
C1
JIT / POD
All paper in this category is White Brightness, 82% or better. Opacity 88% or better
Category
D1
D2
D3
80# gloss cover, 80# gloss text coated 2 sides
D4
90# index, 20# bond
90# index, 20# bond
Cover 160gsm with Body 80gsm
90# index, 20# bond
Just In Time (JIT) or Off Set (OS)?
Use these guidelines to determine if your publication should be JIT (just in time/print on demand) or if it would be more economical to print OS (offset/on a press). OS print jobs require an RFQ (Request For Quote) in US. If your job fits into the “Either” category, an RFQ is recommended, but not required. In the US, RA Strategic Sourcing will discourage or reject RFQs for jobs that fall within the JIT category. Guidelines differ for black & white and color printing, so be sure to check the correct tables.
Black & White Printing
1756 ControlLogix Chassis Specifications Technical Data
Sample: ElectroGuard Selling Brief 80 character limit - must match DocMan Title
8.25” x 11” (RA product profile std)
PLASTCOIL - Plastic Coil (Coil Bound)
A4
BOTTOM
SIDE
NO
YES or NO - If Yes, must have Part No. listed below
8.25” x 10.875”
STAPLED1 -1 position
NO
If SAP Part Number, be sure to enter PN- before the number
7.385” x 9” (RSI Std)
STAPLED1B - bottom 1 position
D5
Select Print Category A,B,C or D from category list, on "Introduction_Category Types" tab
6” x 4”
STAPLED2 - 2 positions
5.5” x 8.5” (half-size)
A7
Ink Color:
One color assumes BLACK / 4 color assume CMYK / Indicate PMS number here
4.75” x 7.75”
A8
24
Total page count including cover. Enter PAGE count, not SHEET count
4.75” x 7” (slightly smaller half-size)
A9
8.5” x 11”
4.25" x 5.50"
Review key below. Leave blank if folded for saddle stitching
4” x 6”
3” x 5”
A4 (8 ¼” x 11 ¾”) (210 x 297 mm)
B4
Drill Hole (Yes/No):
YES
All drilled publications use the 5-hole standard, 5/16 inch-size hole and a minimum of ¼ inch from the inner page border.
A5 (5.83” x 8.26”) (148 x 210 mm)
B5
36” x 24” Poster
Average sheets of paper. 25, 50 75,100 Max
24” x 36” Poster
(required) Business Group:
IA-19134
If your Business Unit is Marketing Commercial, add the appropriate division name after 19134 using the chart on the right. All other Business Units: Enter only the number as in DocMan, no description. Example - 19021
19134 - Commerc 19134 - OEM 19134 - Compone 19134 - Power C 19134 - Global 19134 - Process 19134 - IA 19134 - Service 19134 - IMC 19134 - Safety 19134 - Industr 19134 - Softwar 19134 - Mkt Dig 19134 - US Marke
D1
Microfold or French Fold - designate no. of folds in Comments - intended for single sheet only to be put in box for manufacturing
Comments:
D2
Double Gate
Folds Half, V, Single C or Tri Dble Parll Z or Accordian Microfold or French Double Gate Short Fold
Saddle-Stitch Items All page quantities must be divisible by 4. Note: Stitching is implied for Saddle-Stitch - no need to specify in Stitching Location. 80 pgs max. on 20# (text and cover) 76 pgs max. on 20# (text) and 24# (cover) 72 pgs max. on 24# (text and cover) Perfect Bound Items 940 pgs max. w/cover (90# index unless indicated otherwise) 70 pgs. min. for spine without words 200 pgs min. for spine with words Plastcoil Bound Items 530 pgs max. of 20# (if adding cover deduct equivalent number of pages to equal cover thickness) (90# index unless indicated otherwise) Tape Bound Items 250 pgs max. on 20# no cover 240 pgs max. w/cover (90# index unless indicated otherwise)
D3
D4
D5
D6
D7
D8
D9
MBD000B0209.bin
MBD000B020B.bin
MBD000B020C.bin
MBD000B020A.bin
MBD000B0205.bin
MBD000B0207.bin
MBD000B0208.bin
MBD000B0206.bin
MBD000B0203.bin
MBD000B0204.bin

1756 ControlLogix Chassis Specifications Technical Data

Documents

Transcript of 1756 ControlLogix Chassis Specifications Technical Data