Basic dimensionsThis is the dimensions and shape of the 1st level of the 2 storey building, this is just to show the measurements of all the sides and windows.

This is the dimensions of the 2nd level of the 2 storey building, this is also to give an idea of dimensions and placements.

3d model I made a rather rough model using a cutting knife, glue, glue gun and a type of polystyrene board. I have had the model 3D printed as well and both models should be at this venue (some windows have changed on this shown model).

3d images

This is a 3D view of the south (front) and east side of the building. I've included these to give an idea of how the building would look fully constructed.

This is a 3D view of the north (back) and west of the 3d model, it shows how the back of the building would work with shaded areas and balcony's as well as giving a good idea of how it would look.

Floor plans

This is the floor plan for the first level, I added in a toilet downstairs a tad late so to save time included the dimensions in this picture, this shows the basic layout (subject to some change on the persons will who lives there).

The layout of the second floor I didn’t change between first submission and now so it is still the same.

For further information, feel free to check out any of the following hard copies:

• Document 1- materials + specification + cost estimate.• Document 2- eco systems design.• Document 3- assembly ideas/ joining of rooms.• Document 4- reference points and interior looks.• Document 5- phase 3 bungalow design.• Document 6- any possible changes to original layout after power point

submission.

HARL

OW C

OLLE

GE

16-18 AGE CATEGORY