15. Mining Catalogue 2013 A3 - Couplers Malaga · HOSE & FITTINGS Mining Equipment Catalogue 2013...

HOSE & FITTINGS

Mining Equipment Catalogue 2013

Unit 8/2 Carson Rd

Malaga, WA 6090

Phone: 9248 9994

Fax: 9248 9995

www.couplers.com.au

15– Mining Equipment

MINSUP CLAW COUPLINGS

Minsup safety claw couplings are commonly used in the mining industry, and are manufactured in

three styles: European (Type A), American (Type B) and Australian (Surelock). The standard coupling

heads ensure interchangeability of all sizes, regardless of whether the coupling is male threaded,

female threaded or hosetail. All threads are BSP, with NPT available on order. The Surelock coupling is

the first coupling designed specifically for 1 1/2” and 2” hoses. There are two body sizes in the

Surelock coupling, 3/8” to 1.1/4” and 1.1/2” to 2”. The most commonly used coupling is the Type A.

Body Material: SG Iron AS1831 Seal: Natural Rubber

TYPE A TYPE B SURELOCK

WORKING

PRESSURE

BURST

PRESSURE

WORKING

PRESSURE

BURST

PRESSURE

WORKING

PRESSURE

BURST

PRESSURE

500 psi

3.5 MPa

1000 psi

7MPa

500 psi

3.5MPa

1000 psi

7MPa

1000 psi

7MPa

4000 psi

28MPa

© COPYRIGHT COUPLERS MALAGA, 2013 Page 304

Minsup Fittings

MALE

COUPLING

SIZE TYPE A TYPE B SURELOCK

3/8¨ D/MI-AF-010 D/MI-BF-010 D/MI-SF-010



1¨ D/MI-AF-025 D/MI-BF-025 D/MI-SF-025

1.1/4¨ - - D/MI-SF-032

1.1/2¨ - - D/MI-SF-038

2¨ - - D/MI-SF-050

3¨ D/MI-SF-075

FEMALE

COUPLING


3/8¨ D/MI-AM-010 D/MI-BM-010 D/MI-SM-010



1¨ D/MI-AM-025 D/MI-BM-025 D/MI-SM-025

1.1/4¨ D/MI-AM-032 D/MI-BM-032 D/MI-SM-032

1.1/2¨ - - D/MI-SM-038

2¨ - - D/MI-SM-050

3¨ - - D/MI-SM-075

MINSUP CLAW COUPLINGS

© COPYRIGHT COUPLERS MALAGA, 2013 05

Minsup Fittings

HOSETAIL

COUPLING


3/8¨ D/MI-AH-010 D/MI-BH-010 D/MI-SH-010



1¨ D/MI-AH-025 D/MI-BH-025 D/MI-SH-025

1.1/4¨ D/MI-AH-032 D/MI-BH-032 D/MI-SH-032

1.1/2¨ - - D/MI-SH-038

2¨ - - D/MI-SH-050

3¨ - - D/MI-SH-075

BLANK END


3/8¨ to

1.1/4” D/MI-AC-032 D/MI-BC-032 D/MI-SC-032

1.1/2”

to 2” - - D/MI-SC-050

3-WAY

COUPLING



3/8¨ to

1.1/4” D/MI-AT-032 D/MI-BT-032 D/MI-ST-032

1.1/2”

to 2” - - D/MI-ST-050

SEALS


3/8¨ to

1.1/4” D/MI-SEAL-AB D/MI-SEAL-AB

D/MI-SEAL-

SURE-032

1.1/2”

to 2” - -

D/MI-SEAL-

SURE-050

3” - - D/MI-SEAL-

LOCKING

PIN

The locking pin remains the same for all systems.

PART NUMBER: D/MI-PIN

CLAMPS FOR MINSUP COUPLINGS

HOSE ID

(mm)

HOSE OD (mm) PART NUMBER

FROM TO

1/2” 22 28 D/MI-CLAW-012

3/4” 29 34 D/MI-CLAW-020

1” 35 40 D/MI-CLAW-025

1.1/4” 42 45 D/MI-CLAW-032

1.1/2” 51 58 D/MI-CLAW-038

2” 63 71 D/MI-CLAW-050

Minsup claw clamps are designed specifically for use with Minsup Surelock couplings. The claw sits

above the ridge on the coupling, preventing the coupling from being pulled out of the hose. A two

bolt clamp is suitable for most pressures. Where higher pressures are used, four bolt clamps are also

available.

These double bolt saddle clamps are plain bore type for use on rubber hose.


Heavy Duty Clamps

DOUBLE BOLT CLAW CLAMPS

LUDECKI DOUBLE BOLT SADDLE CLAMP

HOSE ID

(mm)

HOSE OD (mm) PART NUMBER

FROM TO

1/2” 22 29 C/DBL 022-029

3/4” 28 34 C/DBL 028-034

1” 32 40 C/DBL 032-040

1.1/4” 39 49 C/DBL 039-049

1.1/2” 48 60 C/DBL 048-060

2” 56 72 C/DBL 056-072

2” 60 76 C/DBL 060-076

3” 94 114 C/DBL 094-114

2.1/2” 77 94 C/DBL 077-094

HOSE OD (mm) PART

NUMBER FROM TO

29 30 C/DB 029-030-J48

30 35 C/DB 030-035-J49

37 39 C/DB 037-039-JX49

41 46 C/DB 041-046-DL14

44 52 C/DB 044-052-DL20

54 58 C/DB 054-058-DL24

59 67 C/DB 059-067-DL32

63 70 C/DB 063-070-DL275

70 78 C/DB 070-078-DL306

78 86 C/DB 078-086-DL328

82 89 C/DB 082-089-DL350

HOSE OD (mm) PART

NUMBER FROM TO

89 97 C/DB 089-097-400

96 103 C/DB 096-103-431

102 109 C/DB 102-109-463

108 125 C/DB 108-125-525

114 128 C/DB 114-128-550

130 144 C/DB 130-144-600

144 150 C/DB 144-150-639

151 165 C/DB 151-165-675

165 192 C/DB 165-192-769

195 208 C/DB 195-208-818

209 225 C/DB 209-225-875

227 251 C/DB 227-251-988

252 289 C/DB 252-289-1125

284 330 C/DB 284-330-1275

335 381 C/DB 335-381-1450

382 444 C/DB 382-444-1700

These double bolt clamps are adjustable for use where variations exist between outside diameters of

different types of hoses. Rugged, plated malleable iron clamp with machine bolts and hex nuts. The

inner surface has dual gripping ridges. Bolt lugs are reinforced to prevent bending out of alignment.

Sizes up to 89mm are manufactured without saddles.



Heavy Duty Clamps

ADJUSTABLE DOUBLE BOLT CLAW CLAMPS

WITHOUT

SADDLE

WITH

SADDLE

High Pressure Clamps

HOSE ID (mm)

HOSE OD PART NUMBER FROM TO

6 14.3 16.7 D/CB-2-006-BD BD

10 17.5 22.2 D/CB-2-010-CD CD

15

20.6 23.8 D/CB-2-012-DD DD

23.8 27.0 D/CB-2-012-B4 B4

27.0 30.2 D/CB-2-012-B5 B5

20

29.4 32.5 D/CB-2-020-BU9S BU9S

30.2 33.3 D/CB-2-020-BU9 BU9

33.3 38.1 D/CB-2-020-B9 B9

38.1 42.9 D/CB-2-020-B10 B10

MARKING ON FITTING

BOSS CLAMPS

2-BOLT

4-BOLT

2 Gripping teeth

or

4 Gripping teeth (*)

HOSE ID (mm)

HOSE OD PART NUMBER

MARKING ON FITTING FROM TO

25

35.7 39.7 D/CB-4-025-156 156*

38.9 43.7 D/CB-4-025-BU14 BU14

42.9 49.2 D/CB-4-025-B14 B14

49.2 54.0 D/CB-4-025-B15 B15

32

38.1 45.2 D/CB-4-032-BU18 BU18

42.9 47.6 D/CB-4-032-187 187*

54.0 60.3 D/CB-4-032-B19 B19

38

46.0 50.8 D/CB-4-038-BU22 BU22

50.8 56.4 D/CB-4-038-B22 B22

50.8 54.0 D/CB-4-038-212 212*

52.4 57.2 D/CB-4-038-225 225*

55.6 60.3 D/CB-4-038-BU24 BU24

60.3 65.1 D/CB-4-038-B24 B24

65.1 69.9 D/CB-4-038-B25 B25


BOSS GROUND JOINT COUPLINGS

3 Piece

Construction



High Pressure Clamps

4-BOLT

CONTINUED…...

HOSE ID (mm)

HOSE OD PART NUMBER


50

59.5 64.3 D/CB-4-050-BU28 BU28

63.5 70.6 D/CB-4-050-BU29 BU29

69.9 77.8 D/CB-4-050-B29 B29

78.6 87.3 D/CB-4-050-B30 B30

63 88.9 100 D/CB-4-063-B34 B34

75 96.8 103.2 D/CB-4-075-B35 B35

103.2 112.7 D/CB-4-075-B39 B39

6-BOLT

HOSE ID (mm)

HOSE OD PART NUMBER


75 108.0 122.2 D/CB-6-075-BS39 BS39

100

117.5 127.0 D/CB-6-100-B45 B45

123.8 133.4 D/CB-6-100-BS49 BS49

133.4 142.1 D/CB-6-100-BU49 BU49

140.5 150.8 D/CB-6-100-B49 B49

150 174.6 187.3 D/CB-6-150-750 750

CAMPBELL INTERLOCKING U-BOLT CLAMPS

HOSE ID

(mm)

HOSE OD PART

NUMBER FROM TO

1/2" 13/16 1.1/32 D/CC-2-012-026 2

3/4" 1.1/32 1.3/8 D/CC-2-020-034 2

1" 1.5/16 1.1/2 D/CC-4-025-038 4

1.1/2 1.11/16 D/CC-4-025-042 4

1 1/4" 1.9/16 2 D/CC-4-032-050 4

1 1/2" 1.15/16 2.3/16 D/CC-4-038-055 4

2.3/16 2.3/8 D/CC-4-038-060 4

2" 2.11/32 2.11/16 D/CC-4-050-068 4

2.11/16 2.15/16 D/CC-4-050-074 4

NUMBER

OF BOLTS

NUT

TORQUE

15 ft.lbs

25 ft.lbs

25 ft.lbs

25 ft.lbs

25 ft.lbs

35 ft.lbs

35 ft.lbs

55 ft.lbs

55 ft.lbs

Ground Joint Couplings

STEM

FEMALE

SPUD (NPT)

MALE

SPUD (NPT)

DOUBLE

SPUD

SIZE

(mm)

PART

NUMBER

MARKING

ON FITTING

1/2” D/GJ-STEM-0012 GB1

3/4” D/GJ-STEM-0020 GB6

1” D/GJ-STEM-0025 GB11

1.1/4” D/GJ-STEM-0032 GB16

1.1/2” D/GJ-STEM-0038 GB21

2.1/2” D/GJ-STEM-0063 GB31




SIZE

(mm)

PART

NUMBER

MARKING

ON FITTING

1/2” D/GJ-SPUD-M-N-1212 GM3

3/4” D/GJ-SPUD-M-N-2520 GM8

1” D/GJ-SPUD-M-N-2525 GM13

1.1/4” D/GJ-SPUD-M-N-3832 GM18

1.1/2” D/GJ-SPUD-M-N-3838 GM23

2.1/2” D/GJ-SPUD-M-N-6363 GM33




SIZE

(mm)

PART

NUMBER

MARKING

ON FITTING

1/2” D/GJ-SPUD-D-0012 GDB3

3/4” D/GJ-SPUD-D-0020 GDB8

1” D/GJ-SPUD-D-0025 GDB13

1.1/4” D/GJ-SPUD-D-0032 GDB18

1.1/2” D/GJ-SPUD-D-0038 GDB23

2.1/2” D/GJ-SPUD-D-0063 GDB33




SIZE

(mm)

PART

NUMBER

MARKING

ON FITTING

1/2” D/GJ-SPUD-F-N-1212 GB3

3/4” D/GJ-SPUD-F-N-2520 GB8

1” D/GJ-SPUD-F-N-2525 GB13

1.1/4” D/GJ-SPUD-F-N-3832 GB18

1.1/2” D/GJ-SPUD-F-N-3838 GB23

2.1/2” D/GJ-SPUD-F-N-6363 GB33


4” D/GJ-SPUD-F-N-100100 GB48






Ground Joint Couplings

WING

NUT

SIZE

(mm)

PART

NUMBER

MARKING

ON FITTING

1/2” D/GJ-NUT-0012 B2

3/4” D/GJ-NUT-0025 B12

1”

1.1/4” D/GJ-NUT-0038

1.1/2”

2” D/GJ-NUT-0050 B27

2.1/2” D/GJ-NUT-0063 B32

B17

3” D/GJ-NUT-0075 B37

4” D/GJ-NUT-0100 B47

HOSE

JOINER

SIZE

(mm)

PART

NUMBER

MARKING

ON FITTING

1/2” D/GJ-P3N-1212 MS1

3/4” D/GJ-P3N-2020 MS6

1” D/GJ-P3N-2525 MS11

1.1/4” D/GJ-P3N-3232 MS16

1.1/2” D/GJ-P3N-3838 MS21

2.1/2” D/GJ-P3N-6363 MS31

3” D/GJ-P3N-7575 MS36

4” D/GJ-P3N-0100 MS46

2” D/GJ-P3N-5050 MS26

SIZE

(mm)

PART

NUMBER

MARKING

ON FITTING

1/2” D/GJ-P7-0012 M1

3/4” D/GJ-P7-0020 M6

1” D/GJ-P7-0025 M11

1.1/4” D/GJ-P7-0032 M16

1.1/2” D/GJ-P7-0038 M21

2” D/GJ-P7-0050 M26

2.1/2” D/GJ-P7-0063 M31

3” D/GJ-P7-0075 M36

SIZE

(mm)

PART

NUMBER

MARKING

ON FITTING

1/2” D/GJ-P3B-1212 MS1A

3/4” D/GJ-P3B-2020 MS6A

1” D/GJ-P3B-2525 MS11A

1.1/4” D/GJ-P3B-1212 MS16A

1.1/2” D/GJ-P3B-2520 MS21A

2.1/2” D/GJ-P3B-6363 MS31A

3” D/GJ-P3B-7575 MS36A

4” D/GJ-P3B-0100 MS46A

2” D/GJ-P3B-2525 MS26A

MALE STEM

NPT

MALE STEM

BSP

Shank Fittings


SIZE

(mm)

PLATED STEEL

BSP

PLATED STEEL

NPT

1/2” D/MSP3-0012 D/MSP3N-0012

3/4” D/MSP3-0020 D/MSP3N-0020

1” D/MSP3-0025 D/MSP3N-0025

1.1/4” D/MSP3-0032 D/MSP3N-0032

1.1/2” D/MSP3-0038 D/MSP3N-0038

2” D/MSP3-0050 D/MSP3N-0050

2.1/2” D/MSP3-0063 D/MSP3N-0063

3” D/MSP3-0075 D/MSP3N-0075

4” D/MSP3-0100 D/MSP3N-0100

5” D/MSP3-0125 D/MSP3N-0125

6” D/MSP3-0150 D/MSP3N-0150

8” D/MSP3-0200 D/MSP3N-0200

COMBINATION

NIPPLE

*** AVAILABLE IN STAINLESS STEEL ON REQUEST

HOSE JOINER

SIZE

(mm)

PLATED STEEL

BSP

1/2” D/MSP7-0012

3/4” D/MSP7-0020

1” D/MSP7-0025

1.1/4” D/MSP7-0032

1.1/2” D/MSP7-0038

2” D/MSP7-0050

2.1/2” D/MSP7-0063

3” D/MSP7-0075

4” D/MSP7-0100

5” D/MSP7-0125

6” D/MSP7-0150

8” D/MSP7-0200




Safety Accessories

Whip checks are an essential safety feature for high pressure hoses. These spring loaded cables

prevent hose whip in case of accidental separation of coupling or clamp. Whipchecks should be

installed in the extended position (with no slack).

WHIPCHECKS

HOSE SIZE

(mm)

PART

NUMBER

3/8” to 1.1/4” D/WHIP-032

1.1/2” to 2” D/WHIP-050

3” to 4” D/WHIP-100

Safety stockings eliminate the chance of hose “blow-off” from the fittings, and eliminate hose whip

should the hose burst. These safety stockings have a 12 tonne breaking strain. The shackle eye loops

make it easy to attach to the rig and weave pattern wires grip the hose tighter the more it tries to

move.

SAFETY STOCKINGS

HOSE SIZE

(mm)

PART

NUMBER

20-30mm D/HOSESOCK-2030



Victaulic Couplings

SIZE

(mm)

STANDARD

CLAMP

QUICK RELEASE

CLAMP

SHOULDERED

RING

NITRILE

SEAL

2” D/VI-SH-STD-0050 D/VI-SH-QR-0050 D/VI-SH-RING-0050 D/VI-SH-SEAL-0050



6” (165) D/VI-SH-STD-0150 D/VI-SH-QR-0150 D/VI-SH-RING-0150 D/VI-SH-SEAL-0150

6” (168) - - D/VI-SH-RING-0152 -


SHOULDERED FITTINGS

STANDARD

CLAMP

QUICK RELEASE

CLAMP

SHOULDERED

RING

NITRILE

SEAL

Included below is a small range of the shouldered and roll grooved fittings available. Please ask staff

for more details regarding a broader range of fitting types and sizes.

ROLL GROOVED

SIZE

(mm)

RIGID

COUPLING

FLEXIBLE

COUPLING

EPDM

SEAL CAP

2” D/VI-RG-RI-0050 D/VI-RG-FL-0050 D/VI-RG-SEAL-EP-0050 D/VI-RG-STUD-0050

2.1/2” D/VI-RG-RI-0063 D/VI-RG-FL-0063 D/VI-RG-SEAL-EP-0063 D/VI-RG-STUD-0063




RIGID

COUPLING

FLEXIBLE

COUPLING

EPDM

SEAL

MALE

STUD

15. Mining Catalogue 2013 A3 - Couplers Malaga · HOSE & FITTINGS Mining Equipment Catalogue 2013...

Documents

Transcript of 15. Mining Catalogue 2013 A3 - Couplers Malaga · HOSE & FITTINGS Mining Equipment Catalogue 2013...