1.5 - 3.2 Tonne - Bil- og Truckservice AS€¦ · Model (LPG/Diesel powered) DX-15 DX-18 DX-20...

8
NISSAN FORKLIFT EUROPE B.V. http://www.Nissan-nfe.com CEN-1D-01.NFE/12-07-20000 Printed in the Netherlands Nissan Motor Co., Ltd. reserves the right to make any changes without notice concerning colours, equipment or specifications detailed in this brochure, or to discontinue individual models. The colours of vehicles delivered may differ slightly from those in this brochure. The specifications vary for different countries depending on local market conditions. Please consult your local dealer to ensure that the vehicle delivered accords with your expectations. All values are determined based on the standard condition and may vary, due to motor and system tolerances, condition of the truck and operational conditions. Some equipment shown on photos are optional. Load centre mm 500 500 500 500 500 500 Turning radius mm 1,970 2,000 2,190 2,250 2,390 2,390 Length to fork face mm 2,260 2,300 2,530 2,605 2,770 2,770 Series 1.5 - 3.2 Tonne Model (LPG/Diesel powered) DX-15 DX-18 DX-20 DX-25 DX-30 DX-32 Load capacity kg 1,500 1,750 2,000 2,500 3,000 3,200 Load centre mm 500 500 500 500 500 500 Overall width mm 1,080 1,080 1,157 1,157 1,230 1,230 Turning radius mm 1,970 2,000 2,190 2,250 2,390 2,390 Overhead guard height mm 2,115 2,115 2,130 2,130 2,155 2,155 Length to fork face mm 2,260 2,300 2,530 2,605 2,770 2,770 DX MAIN SPECIFICATIONS

Transcript of 1.5 - 3.2 Tonne - Bil- og Truckservice AS€¦ · Model (LPG/Diesel powered) DX-15 DX-18 DX-20...

Page 1: 1.5 - 3.2 Tonne - Bil- og Truckservice AS€¦ · Model (LPG/Diesel powered) DX-15 DX-18 DX-20 DX-25 DX-30 DX32 Load capacity kg 1,500 1,750 2,000 2,500 3,000 3,200 Load centre mm

NISSAN FORKLIFT EUROPE B.V.

http://www.Nissan-nfe.com CEN-1D-01.NFE/12-07-20000 Printed in the Netherlands

Nissan Motor Co., Ltd. reserves the right to make any changes without notice concerning colours, equipment or specifi cations detailed in this brochure, or to discontinue individual

models. The colours of vehicles delivered may differ slightly from those in this brochure. The specifi cations vary for different countries depending on local market conditions. Please

consult your local dealer to ensure that the vehicle delivered accords with your expectations. All values are determined based on the standard condition and may vary, due to motor

and system tolerances, condition of the truck and operational conditions. Some equipment shown on photos are optional.

Model (LPG/Diesel powered) DX-15 DX-18 DX-20 DX-25 DX-30 DX32Load capacity kg 1,500 1,750 2,000 2,500 3,000 3,200

Load centre mm 500 500 500 500 500 500

Overall width mm 1,080 1,080 1,157 1,157 1,230 1,230

Turning radius mm 1,970 2,000 2,190 2,250 2,390 2,390

Overhead guard height mm 2,115 2,115 2,130 2,130 2,155 2,155

Length to fork face mm 2,260 2,300 2,530 2,605 2,770 2,770

Series

1.5 - 3.2 Tonne

Model (LPG/Diesel powered) DX-15 DX-18 DX-20 DX-25 DX-30 DX-32Load capacity kg 1,500 1,750 2,000 2,500 3,000 3,200

Load centre mm 500 500 500 500 500 500

Overall width mm 1,080 1,080 1,157 1,157 1,230 1,230

Turning radius mm 1,970 2,000 2,190 2,250 2,390 2,390

Overhead guard height mm 2,115 2,115 2,130 2,130 2,155 2,155

Length to fork face mm 2,260 2,300 2,530 2,605 2,770 2,770 DXMAIN SPECIFICATIONS

Page 2: 1.5 - 3.2 Tonne - Bil- og Truckservice AS€¦ · Model (LPG/Diesel powered) DX-15 DX-18 DX-20 DX-25 DX-30 DX32 Load capacity kg 1,500 1,750 2,000 2,500 3,000 3,200 Load centre mm

DXDXDX

3Seeking symbiosis of people, vehicles and nature

Nissan’s environmental philosophy is encapsulated in the phrase “symbiosis of

people, vehicles and nature”. This expresses our ideal picture of a sustainable

mobile society.

For the future of our planet and generations to come, we are doing everything

we can to help our natural environment, by reducing the environmental load

in real-world terms and providing customers with innovative products that

contribute to the development of a sustainable mobile society.

Nissan’s ultimate environmental goal is to manage the environmental impact

generated by our corporate activities, customer use of Nissan vehicles, and the

company’s use of resources to a level that is within nature’s capacity to absorb.

We have established specifi c targets to achieve this goal on three key issues,

and are intensifying our efforts to achieve them. Nissan regards the following

three issues as paramount: reducing carbon dioxide (CO2) emissions; cleaner

emissions to preserve the atmosphere, water and soil; and recycling of

resources. Among these three, Nissan is treating the issue of reduction in

CO2 emissions as a high priority. Nissan’s targets for this and other key

issues, as well as measures to achieve them by 2010, are spelled out in the

Nissan Green Program 2010, our medium-term environmental action plan.

We are moving steadily forward to achieve the Program’s goals.

Eco-friendly engine designMaking use of advanced engine technologies developed for passenger cars, Nissan

Forklift products meet emission standards that surpass the strictest regulations laid

down in Europe, the USA and Japan. They also offer productivity-boosting performance

balanced with impressive fuel economy.

To ease the environmental burden and

reduce resource utilisation by Nissan’s

cars, forklift and business activities

ISO14001 certifi ed production facilitiesNissan Forklift’s production facilities are strategically located in Europe, the USA and

Japan. Each factory has the environmental ISO 14001 certifi cate, targeted at reduction

of water and energy consumption, visual and noise disturbances and the avoidance of

releasing pollutants into the air and water.

Maximum re-cyclingEvery Nissan Forklift truck is carefully designed so that up to 98% of the vehicle can

be recycled. Re-use of materials contributes to the effective use of our planet’s limited,

precious natural resources.

Page 3: 1.5 - 3.2 Tonne - Bil- og Truckservice AS€¦ · Model (LPG/Diesel powered) DX-15 DX-18 DX-20 DX-25 DX-30 DX32 Load capacity kg 1,500 1,750 2,000 2,500 3,000 3,200 Load centre mm

DXDXDX

5

Industry leading engine technology

Extreme low exhaust emissions are

achieved by the electronic LPG fuel

injection system. It relies on engine

sensors and the Engine Control

Module (ECM). Accurate delivery of

the best air/fuel ratio provides

optimum combustion, resulting in

better fuel effi ciency and exceptionally

low emissions.

Cle ar air from clean technology

Care for our environment is rightly at the

top of everybody’s agenda. For Nissan,

as the world’s leading manufacturer of

LPG engines used in numerous forklift

truck brands, no-one appreciates this

more. Nissan’s contribution to protecting

and sustaining the environment is eviden-

ced by its new, ultra-clean electronically

controlled K21 and K25 LPG engines

with standard 3-way catalyst, delivering

exceptionally low emissions levels that

are well below the most stringent environ-

mental requirements.

Nissan’s new QD32 diesel engine also

fully complies with the latest European

Stage 3A emission requirements. An op-

tional DPF system is available to reduce

diesel exhaust particles even further.

Ultra low emission levels

Based on our extensive automotive

experience, emissions from Nissan’s

LPG engine are massively reduced.

The resulting ultra low NOx, HC and CO

emission levels contribute to a cleaner

and safer environment. It complies within

the emission limits for 5 year operation.

Standard 3-way catalyst

LPG System

Page 4: 1.5 - 3.2 Tonne - Bil- og Truckservice AS€¦ · Model (LPG/Diesel powered) DX-15 DX-18 DX-20 DX-25 DX-30 DX32 Load capacity kg 1,500 1,750 2,000 2,500 3,000 3,200 Load centre mm

DXDXDX

7

79 dB(A)

77 dB(A) -2 dB(A)

Floating cabin

Nissan’s unique 4-point patented shock

absorption system effi ciently dampens

the cab from engine and road vibrations,

creating a comfortable working environ-

ment for the operator and reducing

noise levels.

The already low noise levels are even

more reduced by selecting the ECO

mode on the LPG models

ECO Noise

Because no two operators are identical,

the steering wheel has ample ad-

justments fore-and-aft (with memory

function) and for height.

Adjustable steering

Keeping the operator comfortable,

relaxed, alert and safe is the primary

objective. The entire operator platform

is designed using the latest ergonomics.

There is easy access, a comfortable,

multi-adjustable suspension seat with

hip supports and seat belt, and generous

legroom. The series offers optional

FINGERTIP control levers. In combina-

tion with the electric forward/reverse

lever (both located on the arm rest),

they make material handling operations

easy, fast and comfortable. The Nissan-

designed CLEAR-VISION cabin is

factory installed option for even greater

comfort and protection. The wide, glass

doors and panoramic front wind-screen

offer unparalleled all-round visibility, all

translating into an excellent working

environment for every operator.

Operator’s well-being

An optional high-comfort seat is

available to further enhance the

operators’ working environment and

minimise physical fatigue during the

most demanding shift.

High comfort seat

Standard 2.5 tonne LPG

ECO mode

EN 12053, operator’s ear

Page 5: 1.5 - 3.2 Tonne - Bil- og Truckservice AS€¦ · Model (LPG/Diesel powered) DX-15 DX-18 DX-20 DX-25 DX-30 DX32 Load capacity kg 1,500 1,750 2,000 2,500 3,000 3,200 Load centre mm

DXDXDX

9

Stability while turning

The standard Nissan-exclusive main-

tenance free Cushion Stability Control

system (CSC), improves lateral stability

and provides confi dent driving while

making turns.

(CSC cannot completely eliminate the possibility

of tipping over)

Standard on all models, the system

automatically locks all lifting and tilting

functions when the operator leaves

the seat to prevent accidental operation.

It is accompanied by an audible alarm

and visual warning on the dashboard.

Mast Lock System

Safety all the time

The DX Series incorporates

Nissan’s Risk Reduction System, a full

range of safety features to help make

your daily operations safer:

• Cushioned Stability Control

• Return-to-Neutral Transmission

• Mast Lock System

• Parking Brake Warning

• Seat Belt Warning

The seat actuated Return-to-Neutral

system is engaged when the operator

leaves the seat while the transmission

is in gear. It disengages the forward and

reverse transmission solenoids within

three seconds to prevent further forklift

movement.

A low, wide step and grab handle provi-

de easy and safe access to the operator

platform, while the low centre of gravity

ensures excellent stability during load

handling. In short, the DX Series offers

total safety for your operations.

With both FINGERTIP and the mecha-

nical forward/reverse levers convenien-

tly located at the right-hand side, the

operator can keep his left hand safely

on the steering wheel at all times.

Hands-on safety

Page 6: 1.5 - 3.2 Tonne - Bil- og Truckservice AS€¦ · Model (LPG/Diesel powered) DX-15 DX-18 DX-20 DX-25 DX-30 DX32 Load capacity kg 1,500 1,750 2,000 2,500 3,000 3,200 Load centre mm

DXDXDX

11

Single lever control

With one lever, lifting and tilting func-

tions can be conducted at the same

time. This system is available for both

mechanical and FINGERTIP levers.

Excellent handling

The DX Series provide excellent hand-

ling performance. The maximum lift

speed is 700 mm/sec. The truck can

be operated slowly with excellent

controllability, or at speed - up to

19 km/hrs - for long distance travel.

OPTIVIEW mast

The optional OPTIVIEW (3V) mast has

full free lift. With its two full free lift

cylinders to the side, there is nothing in

the centre to obstruct the operator’s

visibility.

Productivity on the up

Every model in the DX Series is designed

and built to be a productive workhorse.

Rapid travel and lift speeds, or slow

with excellent controllability. Whatever

is required.

No matter what you have to handle,

powerful Nissan engines, high capacity

hydraulic pumps and excellent stability

make this series one of the fastest and

most productive in its class.

The FINGERTIP levers for right-hand

operation mean you can work faster,

saving up to 10% of your valuable time,

without jeopardising control of the load.

A wide choice of different mast types

(ranging from the standard 2-stage

wide view to the unique 3-stage OPTI-

VIEW type), various tyre and side shift

versions can complement the DX Series

for maximum performance.

Tilt Levelling (option)

Productivity can be improved at the simple

touch of a button on the FINGERTIP

control. It brings the forks completely

horizontal, enabling the operator to posi-

tion the forks to the load quick and easy.

Page 7: 1.5 - 3.2 Tonne - Bil- og Truckservice AS€¦ · Model (LPG/Diesel powered) DX-15 DX-18 DX-20 DX-25 DX-30 DX32 Load capacity kg 1,500 1,750 2,000 2,500 3,000 3,200 Load centre mm

DXDXDX

13

Diagnostics Menu

The on-board Built-In-Test-Equipment

(BITE) has integrated self-check and

dialogue-type functions and allows for

easy troubleshooting and less time.

In the event of a malfunction, a warning

will appear on the LCD display.

Service reminder

When activated, a reminder indication is

shown in the LCD at startup whenever

a specifi ed operating hour or day and

date has been reached, reminding of

the need for regular service.

PIN-code access

The standard 4-digit PIN access system

avoids unauthorised truck usage. Up

to fi ve PIN-codes can be registered.

It allows readout of operating hours

for each code or operator.

Cost effective maintenance

With more than 50 years’ experience

of forklift design, Nissan Forklift has

always built its products to the highest

quality standards and with the objective

of the lowest possible maintenance

costs. Today, that philosophy is no better

demonstrated than with the DX. From

its unique lifting system for excellent

access to the engine compartment,

through to its electronically managed

control systems, maintenance require-

ments can be defi ned and addressed

with the minimum of downtime and

expense.

Engine Concentrated Control System (ECCS)

Engine and vehicle functions are

monitored and controlled continually

through integrated systems that offer

rapid troubleshooting together with the

best truck performance at all times and

under all conditions.

Page 8: 1.5 - 3.2 Tonne - Bil- og Truckservice AS€¦ · Model (LPG/Diesel powered) DX-15 DX-18 DX-20 DX-25 DX-30 DX32 Load capacity kg 1,500 1,750 2,000 2,500 3,000 3,200 Load centre mm

DXDXDX

15

Customer value design

Nissan’s commitment to creating value

for its customers is well known in the

industry and the DX Series offers plenty

reasons why. Consider the ECCS model

engine/transmission protection and

warning system, designed for securing

long engine life. Together with the long

service intervals, the up-time potential is

increased.

Power / ECO and Ground Speed Control

The Standard Power/ECO switch (LPG)

provides even greater fuel savings and

lower noise levels. The optional Ground

Speed Control switch permits selection

of maximum speed based on operator

skill level or operational requirements.

ECOnomics for a lifetime

Whatever the task, you can base your

operations on a DX Series forklift with

complete confi dence. Its Nissan engine

is designed for use in the toughest

conditions, with a worldwide reputation

for reliability, durability, optimum fuel

consumption and low emission levels.

Its quiet working environment and

extensive safety package make the

DX Series an ideal choice. Like all

Nissan forklift trucks, it gives you many

more advantages. There are fewer

breakdowns, the full lifecycle main-

tenance costs are lower and the residual

values are higher. Any way you look at

it, Nissan forklifts are the right tools for

the job.

LPG Swing-down (option)

This ergonomical design uses a gas

spring assist for effortless swing-down

motion to minimise back strain during

tank replacement. It is easier and

quicker.

100%Power mode

ECO mode

82%

(Not available on DX-15)