1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter...

52
1329 & 1330 Scavenger Spreaders PARTS MANUAL Form No. 907523 Revision C

Transcript of 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter...

Page 1: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

1329 & 1330 Scavenger

Spreaders

PARTS MANUAL

Form No.907523Revision C

Page 2: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

IntroductionWhen ordering service parts, specify the correct partnumber, full description, quantity required, the unitmodel number and serial number.

The Spreader model and serial numbers are on a platelocated on the front, left corner of the tank. “Right” and“left” are determined from a position standing behindthe Spreader and facing in the direction of travel. Fromthis position, the expeller is on the “right” side.

Gehl Company reserves the right to make changes orimprovements in the design or construction of any partof the unit without incurring the obligation to installsuch changes on any previously delivered units.

NOTE: On original tire replacement, Companypolicy prohibits the sale of replacement tires for allGehl machinery. Replacement wheel sets areavailable and tire size information is called out withthe wheel sets to facilitate replacement tire selec-tion. ALL REPLACEMENT TIRES MUST BEPURCHASED LOCALLY.

Refer to the abbreviations table located on this page forthe various fastener descriptions. Standard attachinghardware torque values are also provided on the insideback cover.

Items shown in the parts list that do not have ReferenceNumbers are shown for reference purposes only and areNOT available for purchase.

Unless otherwise specified, all cap screws or bolts areGrade 5, cadmium or zinc plated; hexagon nuts forGrade 5 screws or bolts are Grade B; hexagon nuts forother screws or bolts are Grade A.

NOTE: The following abbreviations may beused herein:ASSD - AssembledASSY - AssemblyCB - Carriage BoltCCW - CounterclockwiseCP - Cotter Pin

CS - Cap Screw (Hexagon Head)CTR - CenterCW - ClockwiseDEG - DegreeDIA - DiameterFCS - Flanged Cap ScrewFHMS - Flat Head Machine ScrewFL - FlangedFLN - Flanged Lock Nut (Hexagon)FLS - Flanged Lock Screw (Hexagon)FW - Flat WasherGA - GaugeGR - GradeHD - Hard or HeadHN - Hex NutINCL - IncludesJT - JointLFLN - Large Flanged Lock Nut (Hexagon)LG - LargeLH - Left HandLN - Lock NutLW - Lock WasherLT - LeftM - MetricMM/mm - MillimeterNF - National FinePB - Plow BoltPTO - Power Take OffRH - Right HandRHMS - Round Head Machine ScrewRPM - Revolutions Per MinuteRT - RightSERR - SerratedSHCS - Socket Head Cap ScrewSHSS - Socket Head Set ScrewSN - Serial Number or Slotted NutSQ - SquareT - Tooth or TeethTFS - Thread Forming ScrewTHMS - Truss Head Machine ScrewTHRD - ThreadWLDMT - Weldment

Page 3: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 1 907523/CP0605

TABLE OF CONTENTS

Subject Page No.

Introduction Inside Front Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Decal Locations 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Auger, Liner & Slides 4-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Auger & Expeller Drive 6-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Expeller & Discharge Gate 8-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hydraulics 10-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Guards & Shields 14-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tandem Axles (Standard 12K & Heavy-Duty 15K) 16-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tandem Axles (w/Brakes) 18-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tandem Axles (Brake Hydraulics) 20-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Transport Lights 22-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tank Repair Panels 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Component Parts Listing 25-31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hydraulic Cylinders 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Gearbox 26-27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Auger 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PTO 29-30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hitchjacks 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Options & Accessories 32-37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety Chain (20-Ton) 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Splash Guards & Rails 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Solids Spill Guards 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chain Oiler 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lubeminder System 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hydraulic Lid Kit 37-41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index 42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Numerical Index 43-47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hydraulic Fitting Data 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Standard Hardware Torque Specifications Inside Back Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Page 4: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 2 Printed in U.S.A.

DECAL LOCATIONS

GENERAL INFORMATIONDecal locations information is provided to assist in theproper selection and application of new decals, in theevent the original decals become damaged or themachine is repainted. Refer to the listing for theillustration reference number, part number, descriptionand quantity of each decal provided in the kit. Refer tothe appropriate illustrations for replacement locations.

NOTE: Refer to the SAFETY Chapter forinformation on the safety decals in the decal kit.

To ensure proper selection for correct replacementdecals, compare all of the various close-up locationphotographs to your machine BEFORE starting torefinish the unit. Then circle each pictured decal(applicable to your machine) while checking off its partnumber in the listing. After you have verified all thedecals needed for replacement, set aside unneededdecals for disposal. The decal kit number for safetydecals in the French language is 174812.

NEW DECAL APPLICATIONSurfaces MUST be free from dirt, dust, grease and otherforeign material before applying the new decal. Toapply a solid-formed decal, remove the smaller portionof the decal backing paper and apply this part of theexposed adhesive backing to the clean surface whilemaintaining proper position and alignment. Slowly peeloff the other portion of the backing paper while applyinghand pressure to smooth out the decal surface.

WARNINGALWAYS observe safety precautions shownon decals. If decals become damaged, or if theunit is repainted, replace the decals. Ifrepainting, BE SURE that ALL decals from thekits that apply to your machine are affixed toyour unit.

PAINT NOTICEUse this list to order paint for refinishing:906315 One Gal. AG Red906324 One Qt. Light Grey906316 6 (12 oz. Spray Cans) AG Red906325 6 (12 oz. Spray Cans) Light Grey

The decal kit number for the 1329 & 1330 Scavenger

Spreaders is 141263. The set includes the following:

Ref. PartNo. No. Description & Quantity

1 145234 SMV Decal2 060510 Jack Storage Position3 060511 Jack Lifting Position4 145216 Red Reflector Strip (2 Places)5 091444 DANGER - Rotating Drive Line6 093020 Lubrication Symbol (7 Places W/Tandem

Axles, 5 Places W/Single Axles)7 093208 Rotating Spiral Symbol8 093366 IMPORTANT - Store Manual Here9 093367 WARNING - Owner’s Responsibility &

Read Manual10 093373 WARNING - General Safety Precautions11 093457 WARNING - Keep Door Closed12 093638 DANGER - Rotating Expeller (2 Places)13 093653 WARNING - Rotating Drive Line14 093639 DANGER - Manure Gas15 094912 Colorbar (2 Places)16 094913 GEHL (2 Places, All models)17 094951 Made in USA18 115628* Decal - All Model Numbers (2 Places)19 120399 DANGER - Rotating Auger (3 Places)20 120740 Scavenger Decal (2 Places, All models)21 141249 Decal - Patent22 122736 GEHL (2 Places, All models)23 145217 Amber Reflector Strip (5 Places)** 093202 DANGER - Electrical** 093793 DANGER - Manure Gas for Lid On** 120399 DANGER - Auger** 157332 WARNING - Valve Lockout

* 115628 Model number decal covers all Scavenger

model numbers.** Not included in decal kit. Decals only on units with op-

tional hydraulic lid 808951. See Options & Acces-sories chapter for decal locations.

Page 5: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 3 907523/CP0605

Front View

15

Rear View

161918 4

1

22

6

4

3

2

21

19

15

12

1819

20

14

22

6

6

13

7

20

17

6

16

12

5

9

10

11

6 8

6

23

BothSides

23

BothSides

23

Page 6: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 4 Printed in U.S.A.

Rear View

for Clarity

519

12

20

10

9

21

2527

29

8

1

2

3

4

6

7

13

17

28

26

24

15

14

1122

2628

23

30

24

182628

Items 7 & 17, 8 & 16 to be adhered

together with 3M #90, NAPA #08088

adhesive, or equivalent

16

14

6

31

32

2

32

33

1329 & 1330 - AUGER, LINER & SLIDES

Page 7: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 5 907523/CP0605

Ref. Part QuantityNo. No. Description 1329 1330

1 053894 FITTING/GREASE 5 5

2 061845d CONNECTOR/STRAIGHT TUBE (INCL 31) 10 -(BEFORE SN4714-1329)

142302 CONNECTOR 6 6(AFTER SN4713-1329 & ALL 1330)

3 061847 ADAPTER/BULKHEAD 5 -(BEFORE SN4714-1329)

4 061848 NUT/BULKHEAD ADAPTER 5 55 070856 FLN 3/8 14 56 075105 FITTING/GREASE 5 57 083228 LINER/REAR 1 18 083252 LINER/FRONT 1 19 083255 TRUNNION/ASSY 1 1

10 083256 BUSHING/BRONZE 1 111 088749 COLLAR/SET (INCL 22) 1 112 094842 LINER/TANK 1 113 098088 BEARING/FIBER AUGER 1 114 120334 PLATE/ADJUSTMENT 8 815 120527 COVER/TANK REAR ASSY 1 116 120531 SLIDE/AUGER ASSY FRONT 1 117 120532 SLIDE/AUGER ASSY REAR 1 118 120600 ROD/INDICATOR 1 1

19 120590a AUGER/ASSY 1 1

20 141782 RETAINER/LINER (7 SLOTS) 2 221 606676 BUSHING/OILITE 2 222 650221 SHSS 1/2X1/2 2 223 650490 CS 3/8X1 4 424 650773 CB 3/8X1-1/2 16 1625 651187 CS 3/4X1-3/4 GR8 2 226 653010 HN 3/8 24 2427 654014 FW 3/4 2 228 654026 LW 3/8 24 2429 654034 LW 3/4 2 230 655016 CP 3/16X1 2 231 061846 NUT/COMPRESSION 10 -

(BEFORE SN4714-1329)

32 065185b KIT/GREASE TUBING 5 -(BEFORE SN4714-1329)

142303c KIT/GREASE LINE 5 5(AFTER SN4713-1329 & ALL 1330)

33 142301 ELBOW/90 DEG 4 4(AFTER SN4713-1329 & ALL 1330)

a) For Auger repair see Component Parts Listing page titled Auger.b) Kit contains 5-ft Steel Tubing, two 061846 Compression Nuts and one 061844 Compression Nut.c) Kit contains 3-ft Nylon Tubing, one 142301 Elbow and one 142302 Connector.d) For Compression Nut order 061846.

1329 & 1330 - AUGER, LINER & SLIDES

Page 8: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 6 Printed in U.S.A.

AugerDrive Chain

Jackshaft SprocketDrive Chain

41 464

16

14

11

3237

41 464

16

14

11 15

32

38

25

3435

1943

10

10 36

3

14

29

42

48

22

12

5

1720

20

6

4544 47

39

399

8

3321

31

40

13

6

47

44

181

26

2

24

30

6

45

28

23

49

3027

5

17

18

7

5

ExpellerDrive Chain

508

1

1329 & 1330 - AUGER & EXPELLER DRIVE

Page 9: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 7 907523/CP0605

Ref. Part QuantityNo. No. Description 1329 1330

1 B11433A HOOK-S 2 22 053894 FITTING/GREASE 1 13 056230 KEY/SQUARE 3/8 1 14 057557 FW 17-32 2 25 064331 LN 3/4 3 36 071703 LN 3/8 3 37 080646 SPRING/EXTENSION 1 18 080834 FW 2-17/32 6 69 080846 BRACE/JACKSHAFT 1 1

10 081135 SPACER/PTO 3 3

11 082022a SPROCKET/DRIVE (#80X14T) 2 212 083254 SPACER 1 113 083259 JACKSHAFT/ASSY 1 114 083281 FW 1.760/1.775 SPECIAL 6 615 083283 SPACER 1 116 083289 FW 1.760/1.775 SPECIAL AR AR17 091918 SPROCKET/IDLER#80X12T 2 218 095026 BOLT/EYE 2 219 095027 FW .780 SQ ID 1 120 099242 BUSHING/MACH 3/4X1-1/4 7 721 120331b SPROCKET/JACKSHAFT ASSY (#80X70T, #140X11T) 1 122 120332 SPROCKET/ASSY 140B54 1 123 120339 IDLER ARM ASSY 1 124 120341 IDLER/ASSY 1 125 120344 CHAIN/ROLLER #140X77 1 126 120347 SPRING/EXTENSION 1 127 120539 ROLLER/IDLER 1 128 120604 SHIM/TRANSMISSION 4 429 120615 SPROCKET/80B17 1 130 128015 FW 1-1/32 SPECIAL AR AR

31 NSc GEARBOX/1000 RPM 1 132 500195 COUPLER/PLAIN (#80) 2 233 570000 FITTING/GREASE 1 134 601155 LINK/OFFSET (#140) 1 135 601237 LINK/CONNECTOR (#140) 1 136 056640 EXT.RETAIN.RING(SEEBEAR.).109 THK X 1 137 606662 CHAIN/ROLLER #80X98 1 138 606663 CHAIN/ROLLER #80X82 1 139 650307 CS 5/8 X 1-1/2 14 1440 650492 CS 3/8 X 2-1/2 1 141 650495 CS 1/2 X 1-1/4 2 242 651090 CS 3/4 X 2 GR8 8 843 651292 CB 3/4 X 3 1 144 653021 HN 5/8 14 145 654006 FW 3/8 2 246 654030 LW 1/2 2 247 654032 LW 5/8 14 1448 654034 LW 3/4 8 849 655020 CP 3/16 X 1-1/2 3 350 080605 BUSHING/BRONZE (REQUIRES BORE SIZING AFTER INSTALLATION) 2 2

a) See Operator’s Manual Operation chapter for optional Sprockets and their function.b) Includes Qty. 2 of 080605 2-1/2 X 3” Bronze Bush 3” W/Grease G.c) Not available as a complete assembly. For individual parts, see Component Parts Listing page titled Gearbox.

1329 & 1330 - AUGER & EXPELLER DRIVE

Page 10: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 8 Printed in U.S.A.

119

2

1

19

3

329

55

21

22

16

20

11

2

2410

10 1232

27

3129

14

32

15

28626

3028

1817

5

33

13

257

22

17

18

9

32

434

23288

29

1329 & 1330 - EXPELLER & DISCHARGE GATE

Page 11: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 9 907523/CP0605

Ref. Part QuantityNo. No. Description 1329 1330

1 R13216 HOUSING/BEARING 2 22 071703 LN 3/8 6 63 071706 LN 1/2 8 84 076373 PIN/RETAINER 2 25 081380 FLS 5/16 X 3/4 16 166 082010 WIPER/RUBBER 1 17 094474 TOOTH/EXPELLER 12 128 120240 PAN ASSY 1 19 120245 PANEL/ASSY 1 1

10 120249 ANGLE/GATE RETAINER 2 211 120544 GATE/ASSY 1 112 120587 COVER/SLOT ASSY DISCHARGE 1 113 120725 EXPELLER/ASSY 4 SECTION 1 114 120742 PLATE/COVER REAR 1 115 120751 STRIP/HOLDDOWN 1 116 141247 BAR/INDICATOR 1 117 520194 BEARING/BALL 2 218 520195 COLLAR/BEARING 2 219 570002 FITTING/GREASE 2 220 650490 CS 3/8 X 1 1 121 650495 CS 1/2 X 1-1/4 2 222 650569 CS 1/2 X 1-3/4 8 823 650553 CP 1/8 X 3/4 2 224 650786 CB 3/8 X 1-1/4 8 825 651100 CB 1/2X1-1/4 GR8 24 2426 653010 HN 3/8 8 827 653018 HN 1/2 2 228 654006 FW 3/8 15 1529 654009 FW 1/2 8 830 654026 LW 3/8 8 831 654030 LW 1/2 2 232 210-19470 FLN 5/16 16 1633 210-19530 FLN 1/2 (LARGE FLANGE) 24 2434 380-13297 SPRING 2 2

1329 & 1330 - EXPELLER & DISCHARGE GATE

Page 12: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 10 Printed in U.S.A.

4

10

13

5

18

19

9

1

34

8

25

5

29

35

11

17

21

21

3

8

31

14

28

3033

5

16

24

6

23

2

27

20

20

22

22

12

7

15

32

26

17

35

11

1329 & 1330 - HYDRAULICS (AFTER SN5338-1329)

Page 13: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 11 907523/CP0605

Ref. Part No. No. Description Qty.

1 018453 CLAMP/HOSE 12 054994 UNION/HYD FITTING 13 055021 CLAMP/HOSE 64 056080 QUICK-DISCONNECT (MALE) 45 068938 ELBOW/HYD FITTING 90 DEG 36 071700 LN 1/4 27 071701 LN 5/16 38 071703 LN 3/8 79 074091 TIE/NYLON 4

10 076099 COTTER/HAIR PIN 411 076581 PIN/CLEVIS 412 079098 PLATE/TWIN COVER 313 080629 PIN/GATE CYLINDER 214 087107 UNION/HYD FITTING 215 088904 CLAMP/TUBE 316 094164 VALVE/DIVIDER COMBINER 1

17 095145a CYLINDER/HYDRAULIC 2 X 8 218 095147 HOSE/ASSY 119 095148 HOSE/ASSY 120 095149 HOSE/ASSY 221 095150 HOSE/ASSY 222 095151 HOSE/ASSY 223 114824 ELBOW/HYD FITTING 90 DEG 124 115607 CHANNEL/MOUNT 125 118757 GROMMET 126 119257 ELBOW/JIC 227 119258 TEE/JIC9 128 119694 TUBE 4

29 120362a CYLINDER/HYD 2 X 16 1

30 650019 CS 1/4 X 4 231 650490 CS 3/8 X 1 132 650692 CS 5/16X1-3/4 333 654002 FW 1/4 234 654006 FW 3/8 135 655022 CP 3/16 X 1-3/4 4

a) See Component Parts Listing page entitled Hydraulic Cylinders.

1329 & 1330 - HYDRAULICS (AFTER SN5338-1329)

Page 14: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 12 Printed in U.S.A.

4

10

13

5

18

19

9

1

6

8

25

5

24

2

11

17

21

21

3

8

23

14

28

27

20

20

22

22

12

7

15

16

26

17

2

11

27

1329 - HYDRAULICS (BEFORE SN5339-1329)

Page 15: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 13 907523/CP0605

Ref. Part No. No. Description Qty.

1 018453 CLAMP/HOSE 12 655022 CP 3/16 X 1-3/4 43 055021 CLAMP/HOSE 64 056080 QUICK-DISCONNECT (MALE) 45 068938 ELBOW/HYD FITTING 90 DEG 26 654006 FW 3/8 17 071701 LN 5/16 38 071703 LN 3/8 79 074091 TIE/NYLON 4

10 076099 COTTER/HAIR PIN 411 076581 PIN/CLEVIS 412 079098 PLATE/TWIN COVER 313 080629 PIN/GATE CYLINDER 214 087107 UNION/HYD FITTING 215 088904 CLAMP/TUBE 316 650692 CS 5/16X1-3/4 3

17 095145a CYLINDER/HYDRAULIC 2 X 8 218 095147 HOSE/ASSY 119 095148 HOSE/ASSY 120 095149 HOSE/ASSY 221 095150 HOSE/ASSY 222 095151 HOSE/ASSY 223 650490 CS 3/8 X 1 1

24 120362a CYLINDER/HYD 2 X 16 1

25 118757 GROMMET 126 119257 ELBOW/JIC 227 119258 TEE/JIC9 128 119694 TUBE 4

a) See Component Parts Listing page titled Hydraulic Cylinders.

1329 & 1330 - HYDRAULICS (BEFORE SN5339-1329)

Page 16: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 14 Printed in U.S.A.

7

39

26 32

16

3028

2

13

15

35

31

11

33

5

3

8

25

22

37

1834 36

14

1

17

4

12

6

9

29

10

824

20

38

23

33

33

3

3

2735

31

8

19

38

21

1329 & 1330 - GUARDS & SHIELDS

Page 17: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 15 907523/CP0605

Ref. Part QuantityNo. No. Description 1329 1330

1 059272 HOLDER/SHEARBOLT 1 12 064331 LN 3/4 4 43 070648 FLN 5/16 19 194 071700 LN 1/4 4 45 071703 LN 3/8 1 16 075274 RIVET/BLIND 4 4

7 170695a JACK/ASSY (HAMMERBLOW) 1 1

082027a JACK/ASSY (THURSTON) 1 1

8 081380 FLS 5/16 X 3/4 19 199 091899 HOOK/RUBBER 2 2

10 092665 PIN/CLEVIS 2 211 110032 SUPPORT HYD HOSE 1 112 111421 CLEVIS/BRACKET 2 213 116786 BRACKET/PIVOT 1 114 120291 PROP ROD ASSY 1 115 120618 ROD/PTO SUPPORT 1 116 120755 HITCH/ASSY 1 117 127119 KIT/8 SHEARBOLTS GR9 (4 HELD IN BOLT HOLDER) 4 418 141811 PIN/HINGE 2 219 142097 PANEL/RT 1 120 142098 PANEL/LT 1 121 142102 SHIELD/LT 1 1

22 142368b COVER/FRONT ASSY 1 1

23 142371c SHIELD/FRONT ASSY 1 1

24 142372d SHIELD/ASSY PTO 1 1

25 142373e SHIELD/RT 1 126 650216 SHSS 3/8 X 3/4 2 227 650490 CS 3/8 X 1 2 228 650491 CS 3/8 X 1-1/4 1 129 650590 CP 1/16 X 1/2 2 230 651090 CS 3/4 X 2 GR8 4 431 653010 HN 3/8 3 332 653038 JN 3/8 2 233 654006 FW 3/8 7 734 654009 FW 1/2 2 235 654026 LW 3/8 3 336 655016 CP 3/16 X 1 2 237 220-10238 PIN 2 238 420-19509 STOP/RUBBER 3 3

39 NS f UNIVERSAL DRIVE ASSEMBLY 1 1

a) See Component Parts Listing page titled Hitchjacks for individual parts.b) Includes 093653 & 120399 Decals.c) Includes 093367 & 093373 Decals.d) Includes 080247 Decal.e) Includes 093638 Decal.f) NOT sold as a complete assembly. See Component Breakdowns page titled PTO for individual parts.

1329 & 1330 - GUARDS & SHIELDS

Page 18: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 16 Printed in U.S.A.

1

15

323

13

14

10

12

18

17

165

4

6

79

198

222

20

11

21

24

1329 & 1330 - TANDEM AXLES (STANDARD 12K & HEAVY-DUTY 15K)

Page 19: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 17 907523/CP0605

Ref. Part QuantityNo. No. Description 1329 1330

1 045581 VALVE/TIRE 4 42 070755 FW 1-9/32 SPECIAL 8 8

173477 FW 1.25 HT 8 83 071706 LN 1/2 8 84 112190 CUP/BEARING 4 4

078943 BEARING/CUP 15K HEAVY-DUTY AXLE 4 45 112191 CONE/BEARING 4 4

167021 BEARING CONE 33275 15K HEAVY-DUTY AXLE 4 46 173528 BOLT/WHEEL 3/4X2-3/4 F 40 407 120408 HUB/12K SUBASSY W/BRAKE 4 4

172322 HUB/15K SUBASSY HEAVY-DUTY AXLE 4 48 120434 CONE/BEARING 4 49 120538 NUT/FLANGE 3/4-16 40 40

10 120565 AXLE/TANDEM RT 1 1173230 15K HEAVY-DUTY AXLE/TANDEM RIGHT (NOT SHOWN) 1 1120566 AXLE/TANDEM LT (NOT SHOWN) 1 1173231 15K HEAVY-DUTY AXLE/TANDEM LEFT (NOT SHOWN) 1 1

11 120617 CAP/HUB 4 412 120575 BUSHING/NYLON 2 213 120576 WASHER/RETAINER 4 414 120577 TUBE/RETAINER 2 2

15 141266a WHEEL/W18C X 16.1 4 4

141268b WHEEL/ASSY 13.5 X 22.5 4 4

142496C RIM/ASSY 15 X 20 10 BOLT 4 4141853 RIM/24.0 X 22.5 15K 10BOLT HEAVY-DUTY AXLE 4 4

16 141827 SEAL 4 4078947 SEAL/OIL 15K HEAVY-DUTY AXLE 4 4

17 142369 KIT/SPINDLE REPAIR 4 4174735 KIT/SPINDLE REPAIR 15K HEAVY-DUTY AXLE 4 4

18 570002 FITTING/GREASE 2 2075105 ZERK, GREASE ST 1/8 NPT ST 15K HEAVY-DUTY AXLE 6 6

19 120433 CUP/BEARING 4 420 650484 CS 5/16 X 1/2 16 1621 650640 CP 1/4 X 2-1/2 4 422 651381 SN 1-1/4 4 423 651277 CS 1/2X1-1/2 GR8 8 824 654002 FW 1/4 AWZY 16 16

a) Used with 21.5L x 16.1 14-ply tires.b) Used with 18.0 x 22.5 tires.c) Used with 49 x 17 x 20 recapped aircraft tires with implement tread.

1329 & 1330 - TANDEM AXLES (STANDARD 12K & HEAVY-DUTY 15K)

Page 20: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 18 Printed in U.S.A.

1

1426

27

229

1224 13

11

10

6

217

22

331

19

16

17

23

15

45

32

33

25

8

9

2830

33

20

18

16

1723

1329 & 1330 - TANDEM AXLES (W/BRAKES)

Page 21: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 19 907523/CP0605

Ref. Part QuantityNo. No. Description 1329 1330

1 045581 VALVE/TIRE 4 42 070755 FW 1-9/32 SPECIAL 4 43 071706 LN 1/2 8 84 093995 AXLE/TANDEM RT 1 15 093996 AXLE/TANDEM LT 1 16 112190 CUP/BEARING 4 47 112191 CONE/BEARING 4 48 112208 KIT/CYLINDER REPAIR 4 49 113247 SHOE/BRAKE ASSY 4 4

10 173528 BOLT/WHEEL 3/4X2-3/4 F 40 4011 120408 HUB/12K SUBASSY W/BRAKE 4 412 120434 CONE/BEARING 4 413 120538 NUT/FLANGE 3/4-16 40 4014 120617 CAP/HUB 4 415 120575 BUSHING/NYLON 2 216 120576 WASHER/RETAINER 2 217 120577 TUBE/RETAINER 2 218 141274 FLANGE/BRAKE 4 4

19 141266a WHEEL/W18C X 16.1 4 4

141268b WHEEL/ASSY 13.5 X 22.5 4 4

142496c RIM/ASSY 15 X 20 10 BOLT 4 420 158573 DRUM/BRAKE 13 X 2.5 4 421 141827 SEAL 4 422 142369 KIT/SPINDLE REPAIR 4 423 570002 FITTING/GREASE 2 224 120433 CUP/BEARING 4 425 606127 BRAKE/ASSY RH (INCL 8 & 9) 2 2

606128 BRAKE/ASSY LH (INCL 8 & 9) (NOT SHOWN) 2 226 650484 CS 5/16 X 1/2 16 1627 650640 CP 1/4 X 2-1/2 4 428 650858 CS 1/2X1-1/2 NF 16 1629 651381 SN 1-1/4 4 430 651011 CS 1/2X1 NF 32 3231 651277 CS 1/2X1-1/2 GR8 8 832 653019 HN 1/2 NF 16 1633 654030 LW 1/2 48 48

a) Used with 21.5L x 16.1 14-ply tires.b) Used with 18.0 x 22.5 tires.c) Used with 49 x 17 x 20 recapped aircraft tires with implement tread.

1329 & 1330 - TANDEM AXLES (W/BRAKES)

Page 22: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 20 Printed in U.S.A.

15

9

14

16

9

9

15

8

8

8

11

Pressure

Return

1

3

2

18

2321

4

1224

6

7

19

13

18

18

18

5

5

10

20

20

2017

22

22

1329 & 1330 - TANDEM AXLES (BRAKE HYDRAULICS)

Page 23: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 21 907523/CP0605

Ref. Part QuantityNo. No. Description 1329 1330

1 054997 ELBOW/HYD FITTING 90 DEG 2 22 056080 QUICK-DISCONNECT (MALE) 2 23 067880 CLAMP/HOSE 1 14 074091 TIE/NYLON 4 45 075274 RIVET/BLIND 8 86 098369 VALVE/HYDRAULIC 1 17 115415 TUBE/BRAKE LINE ASSY (125″) 1 18 115416 BRAKE LINE TEE 3 39 115418 HOSE/BRAKE 2 2

10 115504 HOLDER/HOSE 2 211 142837 HOSE/ASSY 2 212 142943 VALVE/RELIEF 1100 PSI 1 113 606119 ELBOW/HYD FITTING 90 DEG 1 114 606124 CLIP/BRAKE HOSE 2 215 606130 CLAMP/BRAKE LINE 8 816 606170 TUBE/BRAKE LINE ASSY (12″) 1 117 606173 TUBE/BRAKE LINE ASSY (36″) 1 118 607181 TUBE 41″/BRAKE LINE 4 419 607185 U-CLAMP 1 120 650985 5/16 X 3/4 THREAD CUTTING SCREW 3 321 653007 HN 5/16 2 222 654004 FW 5/16 6 623 654024 LW 5/16 2 224 660044 BUSHING/HEX REDUCING 1/2 TO 1/8 1 1

1329 & 1330 - TANDEM AXLES (BRAKE HYDRAULICS)

Page 24: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 22 Printed in U.S.A.

Route harness withhydraulic lines.

7

16

17

1

1

1

1

8

9

4

3

1011

14

8 65

212

12

15

13

13

Amber lightto be on outside,

both sides.

Ref. Part QuantityNo. No. Description 1329 1330

1 055648 TIE/WIRE 7 7 2 074257 CLIP/CUSHIONED HALF 4 4 3 084175 HLN INST #10-24 4 4 4 156836 MODULE/LIGHT 1 1

5 157123a LIGHT 2 2 6 157711 SHIELD/LIGHT 2 2 7 159696 HARNESS/LIGHT 1 1 8 159697 HARNESS/LAMP 2 2 9 650815 RHMS SLT #10-24 4 410 650943 THMS SLTD 1/4X1/2 4 411 651456 HLN INS M5 4 412 653005 HN 1/4 4 413 654022 LW 1/4 4 414 650584 FW #10 4 415 170938 COVER 2 216 112917 PLUG/7-PIN W/CABLE 1 117 112886 HOLDER/PLUG (OPTIONAL, HARDWARE FIELD SUPPLIED) 1 1

a) Replacement bulbs (Amber 1156 12V, Red 1157 12V). Obtain locally.

1329 & 1330 - TRANSPORT LIGHTS (AFTER SN5441-1329)

Page 25: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 23 907523/CP0605

Typical

both sides

Nylon tie harness

to hydraulic lines

dkdd

Auxiliary

light connector

Loop excess harness

& nylon tie together

6

6

5

34

1

1

1 1

10

9

2

8

1

7

11

12

Ref. Part QuantityNo. No. Description 1329 1330

1 074091 TIE/NYLON 7 7 2 074257 CLIP/CUSHIONED HALF 4 4 3 119532 BEZEL/WARNING LIGHT 4 4 4 119533 SOCKET/WARNING LIGHT 4 4 5 119665 LIGHT ASSY/AMBER 2 2 6 119666 LIGHT ASSY/RED 2 2 7 120726 HARNESS/WARNING LIGHTS 1 1 8 650943 THMS 1/4X1/2 4 4 9 653005 HN 1/4 4 410 654022 LW 1/4 4 411 112917 PLUG/7-PIN W/CABLE 1 112 112886 HOLDER/PLUG (OPTIONAL, MOUNTING HARDWARE FIELD SUPPLIED) 1 1

1329 & 1330 - TRANSPORT LIGHTS (BEFORE SN5442-1329)

Page 26: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 24 Printed in U.S.A.

Ref. Part QuantityNo. No. Description 1329 1330

1a 171787 LINER/FRONT (42.5″) 1 1 2 171793 LINER/TROUGH (49.6″) 3 3

a) Panel 1 is adjacent to discharge.

1329 & 1330 - TANK REPAIR PANELS

Page 27: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 25 907523/CP0605

Hydraulic Cylinders

12

1

3

1

1

4

1

5

Quantity

Ref. Part 095145 095146 120362No. No. Description (2x8) (2x18) (2x16)

1 089693 KIT/SEAL 1 1 -129829 KIT/SEAL - - 1

2 089689 RING/SNAP 1 1 13 128372 HEAD/HYD CYL 1 1 -

129831 HEAD/HYD CYL - - 14 089690 PISTON/HYD CYL 1 1 -

129834 PISTON/HYD CYL - - 15 073788 NUT/LOCK 1 1 1

1329 & 1330 - COMPONENT PARTS LISTING

Page 28: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 26 Printed in U.S.A.

1

2

22

1518

16

17

14

15

16

1717

16

1815

3011

11

30

1810

28

26

2231

3229

1934

32

31

22

20

2521

24

23

33

34

75

6

Gearbox

1329 & 1330 - COMPONENT PARTS LISTING

Page 29: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 27 907523/CP0605

Ref. Part QuantityNo. No. Description 1329 1330

1 080856 GEARBOX ASSY 1 12 660004 PLUG/PIPE 1/2 SQ HD 1 13 083284 SPACER 1 14 651113 CS 7/16 X 1-3/4 4 45 654028 LW 7/16 4 46 653015 HN 7/16 4 47 606678 BEARING/ROLLER 1 1

10 083288 SHAFT 1 111 059566 KEY 2 212 083283 SPACER 1 114 083287 SHAFT 1 115 650569 CS 1/2 X 1-3/4 12 1216 654030 LW 1/2 12 1217 653018 FW 1/2 12 1218 606541 BEARING/FLANGE 3 319 083282 SPACER 1 120 080845 GASKET/GEARBOX COVER 1 121 083285 TOP/TRANSMISSION 1 122 083281 FW 1.760/1.775 SPECIAL AR AR23 660044 BUSHING/HEX RED 1/2 X 1/8 1 124 045668 FITTING/RELIEF 1 125 650396 CS 3/8 X 1-1/4 4 426 654049 FW 3/8 4 428 067847 NILN 3/8 4 429 606673 GEAR/ 1-3/4 SPUR 1 130 056230 KEY/SQUARE 3 331 083289 FW 1.760/1.775 SPECIAL AR AR32 042858 FW 1-25/32 SPECIAL AR AR33 606672 GEAR/ 1-3/4 SPUR 1 134 570005 FITTING/GREASE 1 1

1329 & 1330 - COMPONENT PARTS LISTING

Page 30: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 28 Printed in U.S.A.

1

2

3

4

5

Auger

Ref. Part QuantityNo. No. Description 1329 1330

1 120590 AUGER/ASSY 1 12 141269 PADDLE/FRONT REPAIR (WELD IN) 2 23 141270 PADDLE/REAR REPAIR (WELD IN) 32 324 120593 SHAFT/ASSY IDLE (WELD IN) 1 15 120594 SHAFT/ASSY DRIVE (WELD IN) 1 1

1329 & 1330 - COMPONENT PARTS LISTING

Page 31: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 29 907523/CP0605

PTO - 1329 & 1330

3

4

5

6

98

7

11

1

2

1810

14

16

19

17

15

139

5

1329 & 1330 - COMPONENT PARTS LISTING

Page 32: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 30 Printed in U.S.A.

Ref. Part QuantityNo. No. Description 1329 1330

1 173016a JOINT & TUBE HALF W/GUARD (1-3/8 X 21”) 1 1173018b JOINT & TUBE HALF W/GUARD (1-3/4” OPTION) 1 1

2 088818 GUARD/PLASTIC (FOR STEEL GUARD SET ONLY) 1 13 084248 YOKE/SLIDE LOCK ASSY (1-3/8 X 21”) 1 1

173811 YOKE W/SLIDE LOCK (1-3/4” OPTION) 1 14 144629 AUTO-LOCK REPAIR KIT (1-3/8 X 21”) 1 1

094539 KIT/SLIDE LOCK REPAIR (1-3/4” OPTION) 1 15 084241c KIT/CROSS 2 26 084239d HOUSING/CENTER ASSY 1 17 084238e YOKE & TUBE/ASSY 1 18 172986 KIT/NYLON REPAIR (FOR PLASTIC GUARD SET ONLY) 1 1

095132 KIT/REPAIR (INCL REF. 09) (FOR STEEL GUARD SET ONLY) 1 19 510100 RETAINER/BEARING (FOR STEEL GUARD SET ONLY) 2 2

10 173014f GUARD SET 1 111 084242 BEARING/CENTRALIZER (FOR STEEL GUARD SET ONLY) 1 113 172594 KIT/NYLON REPAIR (FOR PLASTIC GUARD SET ONLY) 1

095130 KIT/REPAIR (INCL REF. 09) (FOR STEEL GUARD SET ONLY) 1 114 112772 YOKE & SHAFT/ASSY 1 115 045327g KIT/CENTER CROSS 35R 1 116 112771h BALL/SHEAR ASSY 1 117 112767 BALL SHEAR REPAIR KIT 1 118 173017i JOINT & SHAFT HALF W/GUARD 1 119 127119 KIT/8 SHEAR BOLTS GR 9 1 1

a) Includes 173014, 172986, 084238, 084241, 084239, 084248,144629 Auto-Lock Repair Kit (not shown), and 143007Safety Sign (not shown).

b) Includes 173014, 172986, 084238, 084241, 084239, 173811,094539, and 143007 Safety Sign (not shown).

c) Includes Qty. 2 of 570009 Fitting/Grease (not shown).d) Includes 570014 Fitting/Grease (not shown).e) Includes 570001 Fitting/Grease (long) and 570002 Fitting/

Grease (not shown).f) Includes 172986 Kit/Nylon Repair.g) Includes 570009 Zerk/Grease 1/4-28 45 Degree (not shown).h) Includes 570002 Fitting/Grease (not shown).i) Includes 091444 DANGER Decal.

1329 & 1330 - COMPONENT PARTS LISTING

Page 33: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 31 907523/CP0605

15

13

14

12

64

5 1

23

7

1011

98

082027 HitchjackCapacity - 8000 lbs.Travel - 13 inches

THURSTON

Ref. Part Qty.No. No. Description Req.

082027 HITCHJACK - THURSTON 1. . . . . . . .

CONSISTS OF:

1 082650 PIN/BALL LOCK ASSY 1. . . . . . . . . . .

2 082649 CAP/POLY 1. . . . . . . . . . . . . . . . . . . . . .

3 082660 GEAR/12T 1. . . . . . . . . . . . . . . . . . . . . .

4 082645 KEY/SQUARE 1/4X3/4 2. . . . . . . . . . . .

5 082659 SHAFT/PINION 1. . . . . . . . . . . . . . . . . .

6 082647 CRANK/ASSY W/GRIP 1. . . . . . . . . . .

7 082658 GEAR/18T 1. . . . . . . . . . . . . . . . . . . . . .

8 082657 SCREW/LOCK CAP 1. . . . . . . . . . . . . .

9 082656 WASHER/GEAR RETAINER 1. . . . . . .

10 082644 WASHER/SPACER 1. . . . . . . . . . . . . .

11 082655 BEARING/THRUST 1. . . . . . . . . . . . . .

12 082654 SCREW/LH ACME ASSY 1. . . . . . . . .

13 082653 TUBE/OUTER 1. . . . . . . . . . . . . . . . . . .

14 082652 PIN/RETAINING 3/8 NUT 1. . . . . . . . .

15 082651 TUBE/INNER 2. . . . . . . . . . . . . . . . . . . .

Ref. Part Qty.No. No. Description Req.

170695 HITCHJACK - HAMMERBLOW 1. . . .

CONSISTS OF:

1 082650 PIN/BALL LOCK ASSY 1. . . . . . . . . . .

2 170770 INNER TUBE/SCREW & NUT 1. . . . .

3 170771 FINAL ASSY KIT 1. . . . . . . . . . . . . . . . .

4 170772 CRANK ASSY 1. . . . . . . . . . . . . . . . . . . HAMMERBLOW

170695 HitchjackCapacity - 8000 lbs.Travel - 13 inches

4

1 3

2

1329 & 1330 - COMPONENT PARTS LISTING

Page 34: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 32 Printed in U.S.A.

Safety Chain158120 20-Ton - 1329 & 1330

1

2

7

56

8

9

3

4

10

11

Ref. Part QuantityNo. No. Description 1329 1330

1 650695 CS 5/8X3-1/2 1 12 080894 CLEVIS 1 13 654032 LW 5/8 1 14 653021 HN 5/8 1 15 653026 HN 3/4 1 16 654034 LW 3/4 1 17 654014 FW 3/4 1 18 069076 FW 25/32 1 19 651073 CS 3/4X3-1/4 GR8 1 1

10 043912 FW 1-1/32 1 111 143369 CHAIN/SAFETY 1 1

1329 & 1330 - OPTIONS & ACCESSORIES

Page 35: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 33 907523/CP0605

Splash Guards & Rails

1

1

2

2

4

4

3

3

5

6

7

7

8

8

8

9

9

Ref. Part QuantityNo. No. Description 1329 1330

1 099979 SHIELD/RIGHT 2 22 099980 SHIELD/LEFT 2 23 111347 SHIELD 2 24 112137 RAIL/WOOD 2 25 650490 CS 3/8X1 24 246 650540 CB 3/8X3-1/2 8 87 653010 HN 3/8 32 328 654006 FW 3/8 56 569 654026 LW 3/8 32 32

1329 & 1330 - OPTIONS & ACCESSORIES

Page 36: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 34 Printed in U.S.A.

Solids Spill Guards

1

1

2

2

3

3

4

5

6

7

Ref. Part QuantityNo. No. Description 1329 1330

1 141258 SHIELD FRONT R.H. 2 22 141259 SHIELD L.H. 2 23 141257 SHIELD/FRONT 2 24 650704 CB 3/8X1 34 345 653010 HN 3/8 34 346 654006 FW 3/8 34 347 654026 LW 3/8 34 34

1329 & 1330 - OPTIONS & ACCESSORIES

Page 37: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 35 907523/CP0605

158510 Chain Oiler(Field Installed)

54

2010

16

19

8

1114

1713

18

1

21

3

6

9

712

Attaching hardware varies

Ref.

FromTractor

15

2

20 Ref.

1523

22

**

Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.

1 055648 TIE/WIRE 8. . . . . . . . . . . . . . . . . . . . . . . . . . .

2 072806 TEE/HYD FITTING 1. . . . . . . . . . . . . . . . . . .

3 091210 BRUSH/ASSY 4. . . . . . . . . . . . . . . . . . . . . . .

5 172736 BRACKET 1. . . . . . . . . . . . . . . . . . . . . . . . . .

6 157982 BRACKET 4. . . . . . . . . . . . . . . . . . . . . . . . . .

7 650487 CS 5/16X1 1. . . . . . . . . . . . . . . . . . . . . . . . . .

8 650491 CS 3/8X1-1/4 4. . . . . . . . . . . . . . . . . . . . . . . .

9 650510 TCS 5/16X1/2 3. . . . . . . . . . . . . . . . . . . . . . .

10 653007 HN 5/16 3. . . . . . . . . . . . . . . . . . . . . . . . . . . .

11 653010 HN 3/8 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12 654004 FW 5/16 2. . . . . . . . . . . . . . . . . . . . . . . . . . . .

13 654022 LW 1/4 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14 654026 LW 3/8 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15 158729 HOSE/ASSY - 54″ 1. . . . . . . . . . . . . . . . . . .

16 158006 U-BOLT 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

17 650758 CB 1/4X3/4 4. . . . . . . . . . . . . . . . . . . . . . . . . .

18 653005 HN 1/4 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19 079340 TIE/NYLON 2. . . . . . . . . . . . . . . . . . . . . . . . .

20 158379 TUBE/NYLON 360 1. . . . . . . . . . . . . . . . . . .

21 172744a LUBEMINDER SYSTEM 1. . . . . . . . . . . . . .

22 158730b HOSE/ASSY - 24″ 1. . . . . . . . . . . . . . . . . . .

23 230-17076b UNION/HYD FITTING 1. . . . . . . . . . . . . . . .

a) See following page for further breakdown.b) Use as required on certain models.

1329 & 1330 - OPTIONS & ACCESSORIES

Page 38: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 36 Printed in U.S.A.

Ref. Part Qty.No. No. Description Req.

1 091213 TUBE 1. . . . . . . . . . . . . . . . . . . . . . . . . .

2 172916 OILER PUMP KIT 1. . . . . . . . . . . . . . . .

3 420-21748 CLAMP 2. . . . . . . . . . . . . . . . . . . . . . . . .

4 172743 MANIFOLD ASSY 4. . . . . . . . . . . . . . . .

5 119565a KIT/VALVE 4. . . . . . . . . . . . . . . . . . . . . .

6 091209 TANK/OIL 1. . . . . . . . . . . . . . . . . . . . . . .

7 112269 CAP/OIL TANK 1. . . . . . . . . . . . . . . . . .

a) Kit contains four Sleeve Nuts and four Ferrules.

172744 Lubeminder System7

6

3

1

3

2

5

4

1329 & 1330 - OPTIONS & ACCESSORIES

Page 39: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 37 907523/CP0605

808951 Hydraulic LidParts list - Inlet

26

17

31

5 21

30

25

18

8

24

33

25

29

2

12

30

33

29

12

19

30

29

33

30

13

13

Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.

2 071703 LN CTR 3/8 CBZY 4. . . . . . . . . . . . . . . . . . .

5 084175 HLN INST #1024 CZY 4. . . . . . . . . . . . . . . .

8 089079 PIN/KLIK 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

12 093202 DECAL/DANGER ELECTRICAL 2. . . . . . . .

13 093639 DECAL/DANGER MANURE GAS 2. . . . .

17 155176 BUMPER/RUBBER 4. . . . . . . . . . . . . . . . . .

18 156845 INLET/FILLER 1. . . . . . . . . . . . . . . . . . . . . . .

19 156890 COVER 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

21 157446 COVER/TOP 2. . . . . . . . . . . . . . . . . . . . . . . .

24 157848 PLATE/LOCK 1. . . . . . . . . . . . . . . . . . . . . . . .

25 650059 CS 3/8X1 C2 6. . . . . . . . . . . . . . . . . . . . . . . .

26 650815 RHMS SLT #1024X3/4 CZY 4. . . . . . . . . . . .

29 653010 HN 3/8 C2ZY 22. . . . . . . . . . . . . . . . . . . . . . .

30 654006 FW 3/8 AWZY 28. . . . . . . . . . . . . . . . . . . . . .

31 654017 FW #10 A 4. . . . . . . . . . . . . . . . . . . . . . . . . . .

33 654026 LW 3/8 RZY 22. . . . . . . . . . . . . . . . . . . . . . . .

1329 & 1330 - OPTIONS & ACCESSORIES

Page 40: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 38 Printed in U.S.A.

808951 Hydraulic LidParts list - Lid/Frame

22

9

11

20

16

16

15

23

3

35

10

34

14

14

6

6

1

47

2832

27

Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.

1 071701 LN 5/16 CBZY 4. . . . . . . . . . . . . . . . . . . . . . .

3 074090 PIN/SPRING 3/16X1-1/2 Z 4. . . . . . . . . . . .

4 079098 PLATE/TWIN COVER 4. . . . . . . . . . . . . . . .

6 087107 CONNECTOR/UNION 37 DEG JIC 2. . . . .

7 088904 CLAMP/TUBE 2PC SET 4. . . . . . . . . . . . . .

9 092809 SEAL/LID SIDE 6” X 185.5 2. . . . . . . . . . . .

10 092810 .875 CD ROUND 18.87 PIN/HINGE 3. . . . .

11 092824 SEAL/LID END 6X103.7 2. . . . . . . . . . . . . . .

14 119694 TUBE/HYDRAULIC 96.75” 4. . . . . . . . . . . .

15 120362 CYLINDER/HYDRAULIC 2 X 16 2. . . . . . . .

16 120399 DECAL/DANGER AUGER 2. . . . . . . . . . . . .

20 157434 SUBFRAME 1. . . . . . . . . . . . . . . . . . . . . . . . .

22 157603 LID/TANK WELDMENT 1. . . . . . . . . . . . . . .

23 157632 PIN/PIVOT 4. . . . . . . . . . . . . . . . . . . . . . . . . .

27 651069 FCH ELVTR BOLT 5/16X1-1/2 C2ZY 48. .

28 653007 HN 5/16 C2ZY 48. . . . . . . . . . . . . . . . . . . . . .

32 654024 LW 5/16 RZY 48. . . . . . . . . . . . . . . . . . . . . . .

34 655018 CP EPSC 3/16X1-1/4 Z 6. . . . . . . . . . . . . . .

35 7H37 SPACER 4. . . . . . . . . . . . . . . . . . . . . . . . . . .

1329 & 1330 - OPTIONS & ACCESSORIES

Page 41: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 39 907523/CP0605

808951 Hydraulic LidParts list - Frame Hardware

72

75

76

74

73

54

6556

7059

52

ref.62

6367

67

7153

66

64

Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.

52 071701 LN 5/16 CBZY 2. . . . . . . . . . . . . . . . . . . . . . .

53 071703 LN CTR 3/8 CBZY 4. . . . . . . . . . . . . . . . . . .

54 081374 LN SER FL 1/2 CZY 4. . . . . . . . . . . . . . . . . .

56 092164 CS FL LOCK 1/2X1-1/4 C5ZY 4. . . . . . . . .

59 141492 VALVE/LOCKOUT 1. . . . . . . . . . . . . . . . . . .

62 156727 WLDMT/LATCH 2. . . . . . . . . . . . . . . . . . . . . .

63 156734 PIN/TRUNNION 2. . . . . . . . . . . . . . . . . . . . .

64 156798 PIN/LOCK 2. . . . . . . . . . . . . . . . . . . . . . . . . .

65 157332 DECAL/WARNING VALVE LOCKOUT 1. . .

66 157918 HANDLE 2. . . . . . . . . . . . . . . . . . . . . . . . . . .

67 157979 PLATE 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

70 170691 ANGLE/SIGN 1. . . . . . . . . . . . . . . . . . . . . . .

71 650535 CS 3/8X2-1/4 C5ZY 4. . . . . . . . . . . . . . . . . .

72 650704 CB 3/8X1 C5ZY 18. . . . . . . . . . . . . . . . . . . . .

73 650733 CS 5/16X2-1/2 C5ZY 2. . . . . . . . . . . . . . . . .

74 653010 HN 3/8 C2ZY 18. . . . . . . . . . . . . . . . . . . . . . .

75 654005 FW 3/8 AW 18. . . . . . . . . . . . . . . . . . . . . . . . .

76 654026 LW 3/8 RZY 18. . . . . . . . . . . . . . . . . . . . . . . .

1329 & 1330 - OPTIONS & ACCESSORIES

Page 42: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 40 Printed in U.S.A.

808951 Hydraulic LidParts list - Hydraulics

57

51

57

51

51

51

51

5169

58

68

69

69

55

61

60

Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.

51 068938 ELBOW/90 DEG ADJUSTABLE 7. . . . . . . .

55 091039 ELBOW/HYDR. FITT 90 DEG 6500-6-6 1.

57 119257 ELBOW/JIC (SPECIAL) 3. . . . . . . . . . . . . . .

58 119258 TEE/JIC (SPECIAL) 1. . . . . . . . . . . . . . . . . .

60 154160 HOSE/ASSY 2. . . . . . . . . . . . . . . . . . . . . . . .

61 154615 COUPLER/MALE 2. . . . . . . . . . . . . . . . . . . .

68 170683 HOSE/ASSY 1. . . . . . . . . . . . . . . . . . . . . . . .

69 170684 HOSE/ASSY 4. . . . . . . . . . . . . . . . . . . . . . . .

1329 & 1330 - OPTIONS & ACCESSORIES

Page 43: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

Printed in U.S.A. 41 907523/CP0605

808951 Hydraulic LidParts list - Ladder

72

78

72

79

81

5374

74

74

76

76 7672

80

Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.

53 071703 LN CTR 3/8 CBZY 2. . . . . . . . . . . . . . . . . . .

72 650704 CB 3/8X1 C5ZY 6. . . . . . . . . . . . . . . . . . . . . .

74 653010 HN 3/8 C2ZY 6. . . . . . . . . . . . . . . . . . . . . . . .

76 654026 LW 3/8 RZY 6. . . . . . . . . . . . . . . . . . . . . . . . .

78 170782 LADDER ASSY 1. . . . . . . . . . . . . . . . . . . . . .

79 170796 STEP 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

80 170799 BRACKET/MOUNT 1. . . . . . . . . . . . . . . . . . .

81 650579 CS 3/8X1-3/4 C5ZY 2. . . . . . . . . . . . . . . . . .

1329 & 1330 - OPTIONS & ACCESSORIES

Page 44: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 42 Printed in U.S.A.

IndexA

Auger, 28

CComponent Breakdowns

Auger, 28Hitchjacks, 31Hydraulic Cylinders, 25PTO - 1329 & 1330, 29

DDecal Application, 2

Decal Kit and list, 2Decal Locations, 2–4

HHitchjacks, 31Hydraulic Cylinders, 25Hydraulics, 10–13

OOptions & Accessories

Safety Chain, 32Solids Spill Guards, 34Splash Guards & Rails, 33

PPaint Notice, 2PTO - 1329 & 1330, 29

SSafety Chain, 32Solids Spill Guards, 34Splash Guards & Rails, 33

TTank Repair Panels, 24Transport Lights, 22–23

Page 45: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

1329 & 1330 - NUMERICAL INDEX

Part Page Ref. Part Page Ref. Part Page Ref. Part Page Ref.No. No. No. No. No. No. No. No. No. No. No. No.

Printed in U.S.A. 43 907523/CP0605

7H37 38 35

B11433A 07 01

R13216 09 01

018453 11 01

018453 13 01

042858 27 32

043912 32 10

045327 30 15

045581 17 01

045581 19 01

045668 27 24

053894 05 01

053894 07 02

054994 11 02

054997 21 01

055021 11 03

055021 13 03

055648 22 01

055648 35 01

056080 11 04

056080 13 04

056080 21 02

056230 07 03

056230 27 30

056640 07 36

057557 07 04

059272 15 01

059566 27 11

060510 02 02

060511 02 03

061845 05 02

061846 05 31

061847 05 03

061848 05 04

064331 07 05

064331 15 02

065185 05 32

067847 27 28

067880 21 03

068938 11 05

068938 13 05

068938 40 51

069076 32 08

070648 15 03

070755 17 02

070755 19 02

070856 05 05

071700 11 06

071700 15 04

071701 11 07

071701 13 07

071701 38 01

071701 39 52

071703 07 06

071703 09 02

071703 11 08

071703 13 08

071703 15 05

071703 37 02

071703 39 53

071703 41 53

071706 09 03

071706 17 03

071706 19 03

072806 35 02

073788 25 05

074090 38 03

074091 11 09

074091 13 09

074091 21 04

074091 23 01

074257 22 02

074257 23 02

075105 05 06

075105 17 18

075274 15 06

075274 21 05

076099 11 10

076099 13 10

076373 09 04

076581 11 11

076581 13 11

078943 17 04

078947 17 16

079098 11 12

079098 13 12

079098 38 04

079340 35 19

080629 11 13

080629 13 13

080646 07 07

080834 07 08

080845 27 20

080846 07 09

080856 27 01

080894 32 02

081135 07 10

081374 39 54

081380 09 05

081380 15 08

082010 09 06

082022 07 11

082027 31 00

082644 31 10

082645 31 04

082647 31 06

082649 31 02

082650 31 01

082650 31 01

082651 31 15

082652 31 14

082653 31 13

082654 31 12

082655 31 11

082656 31 09

082657 31 08

082658 31 07

082659 31 05

082660 31 03

083228 05 07

083252 05 08

083254 07 12

083255 05 09

083256 05 10

083259 07 13

083281 07 14

083281 27 22

083282 27 19

083283 07 15

083283 27 12

083284 27 03

083285 27 21

083287 27 14

083288 27 10

083289 07 16

083289 27 31

084175 22 03

084175 37 05

084238 30 07

084239 30 06

084241 30 05

084242 30 11

084248 30 03

087107 11 14

087107 13 14

087107 38 06

088749 05 11

088818 30 02

088904 11 15

088904 13 15

088904 38 07

089079 37 08

089689 25 02

089690 25 04

089693 25 01

091039 40 55

091209 36 06

091210 35 03

091213 36 01

091444 02 05

091899 15 09

091918 07 17

092164 39 56

092665 15 10

092809 38 09

092810 38 10

092824 38 11

093020 02 06

093202 02 **

093202 37 12

093208 02 07

093366 02 08

093367 02 09

093373 02 10

093457 02 11

093638 02 12

093639 02 14

093653 02 13

093793 02 **

093793 38 13

093995 19 04

093996 19 05

094164 11 16

094474 09 07

094539 30 04

Page 46: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

1329 & 1330 - NUMERICAL INDEX

Part Page Ref. Part Page Ref. Part Page Ref. Part Page Ref.No. No. No. No. No. No. No. No. No. No. No. No.

907523/CP0605 44 Printed in U.S.A.

094842 05 12

094912 02 15

094913 02 16

094951 02 17

095026 07 18

095027 07 19

095130 30 13

095132 30 08

095145 11 17

095145 13 17

095147 11 18

095147 13 18

095148 11 19

095148 13 19

095149 11 20

095149 13 20

095150 11 21

095150 13 21

095151 11 22

095151 13 22

098088 05 13

098369 21 06

099242 07 20

099979 33 01

099980 33 02

110032 15 11

111347 33 03

111421 15 12

112137 33 04

112190 17 04

112190 19 06

112191 17 05

112191 19 07

112208 19 08

112269 36 07

112767 30 17

112771 30 16

112772 30 14

112886 22 17

112886 23 12

112917 22 16

112917 23 11

113247 19 09

114824 11 23

115415 21 07

115416 21 08

115418 21 09

115504 21 10

115607 11 24

115628 02 18

116786 15 13

118757 11 25

118757 13 25

119257 11 26

119257 13 26

119257 40 57

119258 11 27

119258 13 27

119258 40 58

119532 23 03

119533 23 04

119565 36 05

119665 23 05

119666 23 06

119694 11 28

119694 13 28

119694 38 14

120240 09 08

120245 09 09

120249 09 10

120291 15 14

120331 07 21

120332 07 22

120334 05 14

120339 07 23

120341 07 24

120344 07 25

120347 07 26

120362 11 29

120362 13 24

120362 38 15

120399 02 19

120399 02 **

120399 38 16

120408 17 07

120408 19 11

120433 17 19

120433 19 24

120434 17 08

120434 19 12

120527 05 15

120531 05 16

120532 05 17

120538 17 09

120538 19 13

120539 07 27

120544 09 11

120565 17 10

120566 17 10

120575 17 12

120575 19 15

120576 17 13

120576 19 16

120577 17 14

120577 19 17

120587 09 12

120590 05 19

120590 28 01

120593 28 04

120594 28 05

120600 05 18

120604 07 28

120615 07 29

120617 17 11

120617 19 14

120618 15 15

120725 09 13

120726 23 07

120740 02 20

120742 09 14

120751 09 15

120755 15 16

122736 02 22

127119 15 17

127119 30 19

128015 07 30

128372 25 03

129829 25 01

129831 25 03

129834 25 04

141247 09 16

141249 02 21

141257 34 03

141258 34 01

141259 34 02

141266 17 15

141266 19 19

141268 17 15

141268 19 19

141269 28 02

141270 28 03

141274 19 18

141492 39 59

141782 05 20

141811 15 18

141827 17 16

141827 19 21

141853 17 15

142097 15 19

142098 15 20

142102 15 21

142301 05 33

142302 05 02

142303 05 32

142368 15 22

142369 17 17

142369 19 22

142371 15 23

142372 15 24

142373 15 25

142496 17 15

142496 19 19

142837 21 11

142943 21 12

143369 32 11

144629 30 04

145216 02 04

145217 02 23

145234 02 01

154160 40 60

154615 40 61

155176 37 17

156727 39 62

156734 39 63

156798 39 64

156836 22 04

156845 37 18

156890 37 19

157123 22 05

157332 02 **

157332 39 65

157434 38 20

157446 37 21

157603 38 22

157632 38 23

Page 47: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

1329 & 1330 - NUMERICAL INDEX

Part Page Ref. Part Page Ref. Part Page Ref. Part Page Ref.No. No. No. No. No. No. No. No. No. No. No. No.

Printed in U.S.A. 45 907523/CP0605

157711 22 06

157848 37 24

157918 39 66

157979 39 67

157982 35 06

158006 35 16

158379 35 20

158573 19 20

158729 35 15

158730 35 22

159696 22 07

159697 22 08

167021 17 05

170683 40 68

170684 40 69

170691 39 70

170695 15 07

170695 31 00

170770 31 02

170771 31 03

170772 31 04

170782 41 78

170796 41 79

170799 41 80

170938 22 15

171787 24 01

171793 24 02

172322 17 07

172594 30 13

172736 35 05

172743 36 04

172916 36 02

172986 30 08

173014 30 10

173016 30 01

173017 30 18

173018 30 01

173230 17 10

173231 17 10

173477 17 02

173528 17 06

173528 19 10

173811 30 03

174735 17 17

500195 07 32

510100 30 09

520194 09 17

520195 09 18

570000 07 33

570001 30 07

570002 09 19

570002 17 18

570002 19 23

570002 30 07

570002 30 16

570005 27 34

570009 30 05

570014 30 06

601155 07 34

601237 07 35

606119 21 13

606124 21 14

606127 19 25

606128 19 25

606130 21 15

606170 21 16

606173 21 17

606541 27 18

606662 07 37

606663 07 38

606672 27 33

606673 27 29

606676 05 21

606678 27 07

607181 21 18

607185 21 19

650019 11 30

650059 37 25

650201 05 22

650216 15 26

650307 07 39

650396 27 25

650484 17 20

650484 19 26

650487 35 07

650490 05 23

650490 09 20

650490 11 31

650490 13 23

650490 15 27

650490 33 05

650491 15 28

650491 35 08

650492 07 40

650495 07 41

650495 09 21

650510 35 09

650535 39 71

650540 33 06

650553 09 23

650569 09 22

650569 27 15

650579 41 81

650584 22 14

650590 15 29

650640 17 21

650640 19 27

650692 11 32

650692 13 16

650695 32 01

650704 34 04

650704 39 72

650704 41 72

650733 39 73

650758 35 17

650773 05 24

650786 09 24

650815 22 09

650815 37 26

650858 19 28

650943 22 10

650943 23 08

650985 21 20

651011 19 30

651069 38 27

651073 32 09

651090 07 42

651090 15 30

651100 09 25

651113 27 04

651187 05 25

651277 17 23

651277 19 31

651292 07 43

651381 17 22

651381 19 29

651456 22 11

653005 22 12

653005 23 09

653005 35 18

653007 21 21

653007 35 10

653007 38 28

653010 05 26

653010 09 26

653010 15 31

653010 33 07

653010 34 05

653010 35 11

653010 37 29

653010 39 74

653010 41 74

653015 27 06

653018 09 27

653018 27 17

653019 19 32

653021 07 44

653021 32 04

653026 32 05

653038 15 32

654002 11 33

654002 17 24

654004 21 22

654004 35 12

654005 39 75

654006 07 45

654006 09 28

654006 11 34

654006 13 06

654006 15 33

654006 33 08

654006 34 06

654006 37 30

654009 09 29

654009 15 34

654014 05 27

654014 32 07

654017 37 31

654022 22 13

654022 23 10

654022 35 13

654024 21 23

654024 38 32

654026 05 28

654026 09 30

Page 48: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

1329 & 1330 - NUMERICAL INDEX

Part Page Ref. Part Page Ref. Part Page Ref. Part Page Ref.No. No. No. No. No. No. No. No. No. No. No. No.

907523/CP0605 46 Printed in U.S.A.

654026 15 35

654026 33 09

654026 34 07

654026 35 14

654026 37 33

654026 39 76

654026 41 76

654028 27 05

654030 07 46

654030 09 31

654030 19 33

654030 27 16

654032 07 47

654032 32 03

654034 05 29

654034 07 48

654034 32 06

654049 27 26

655016 05 30

655016 15 36

655018 38 34

655020 07 49

655022 11 35

655022 13 02

660004 27 02

660044 21 24

660044 27 23

210-19470 09 32

210-19530 09 33

220-10238 15 37

230-17076 35 23

380-13297 09 34

420-19509 15 38

420-21748 36 03

Page 49: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

1329 & 1330 - NUMERICAL INDEX

Part Page Ref. Part Page Ref. Part Page Ref. Part Page Ref.No. No. No. No. No. No. No. No. No. No. No. No.

Printed in U.S.A. 47 907523/CP0605

NOTES:

Page 50: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 48 Printed in U.S.A.

Page 51: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

TORQUE SPECIFICATIONSNOTE: Use these torque values when tightening hardware (excluding: locknuts and self -tapping, thread forming and sheet metal screws) unless specified otherwise.

All torque values are in Lb-Ft, except those marked with an *, which are Lb-In.(For metric torque value Nm, multiply Lb-Ft value by 1.355 or Lb-In value by 0.113)

Unified Grade 2 Grade 5 Grade 8National Thread Dry Lubed Dry Lubed Dry Lubed

8-32 19* 14* 30* 22* 41* 31*8-328-36

1920*

1415*

3031*

2223*

4143*

31 32*

10-24 27* 21* 43* 32* 60* 45*10-2410-32

2731*

2123*

4349*

3236*

6068*

45 51*

1/4-20 66* 50* 9 75* 12 91/4-201/4-28

6676*

5056*

910

7586*

1214

9 10

5/16-18 11 9 17 13 25 185/16-185/16-24

1112 9 17

191314 25 18

20

3/8-16 20 15 30 23 45 353/8-163/8-24

2023

1517

3035

2325

4550 35

7/16-14 32 24 50 35 70 557/16-147/16-20

3236

2427

5055

3540

7080

55 60

1/2-13 50 35 75 55 110 801/2-131/2-20

5055

3540

7590

5565

110120

80 90

9/16-12 70 55 110 80 150 1109/16-129/16-18

7080

5560

110120

8090

150170

110 130

5/8-11 100 75 150 110 220 1705/8-115/8-18

100110

7585

150180

110130

220240

170 180

3/4-10 175 130 260 200 380 2803/4-103/4-16

175200

130150

260300

200220

380420

280 320

7/8-9 170 125 430 320 600 4607/8-97/8-14

170180

125140

430470

320360

600660

460 500

1-8 250 190 640 480 900 6801-81-14

250270

190210

640710

480530

9001000

680 740

Metric Grade 8.8 8.8 Grade 10.9 10.9 Grade 12.9 12.9

Course Thread Dry Lubed Dry Lubed Dry Lubed

M6-1 8 6 11 8 13.5 10

M8-1.25 19 14 27 20 32.5 24

M10-1.5 37.5 28 53 39 64 47

M12-1.75 65 48 91.5 67.5 111.5 82

M14-2 103.5 76.5 145.5 108 176.5 131

M16-2 158.5 117.5 223.5 165.5 271 200

Page 52: 1329 & 1330cdnmedia.endeavorsuite.com/images/organizations... · CCW - Counterclockwise CP - Cotter Pin CS - Cap Screw (Hexagon Head) CTR - Center CW - Clockwise DEG - Degree DIA

907523/CP0605 2005 GEHL Company. All Rights Reserved. Printed in U.S.A.

Gehl Company 143 Water Street, P.O. Box 179, West Bend, WI 53095-0179 U.S.A.www.gehl.com