122183.pdf

download 122183.pdf

of 4

Transcript of 122183.pdf

  • 7/27/2019 122183.pdf

    1/4

    Qick Gideresidential floor& roof stems

    GP La

    LvL

    Wd i Ba ji

    FiBrrnG

    ri Bar

    What you dontsee matters

    ngineered

    Lmber edition

    5

  • 7/27/2019 122183.pdf

    2/4

  • 7/27/2019 122183.pdf

    3/4

    Ask your GP salesrepresentative aboutsizes and availability

    o GP Glulam.

    Resists shrinking, warping, splitting and checking

    2.0E has high design values or bending, stiness and shear strength

    FiberGuard sealant provides short-term protection rom moisture

    during the construction phase

    Available in 2.0E, and 1349 and 3129 thicknesses (1129 by special order),

    and depths rom 3129 to 249

    Available in value lengths rom 248 to 488 (lengths up to 608 by special order)

    Ideally suited or foor systems congured with Georgia-Pacic

    Wood I Beam joists

    Available in 128 lengths (1189 thick)

    Available in depths rom 9129 to 169

    Referenced dimensions are nominal and used for design purposes.

    apacitiesVertical Load:

    Rim or star ter joist = 4850 pl.

    Horizontal load (lateral seismic or wind):

    200 pl using a load duration actor o 160%

    9 lag or through astener attaching ledger to rim board:

    350 lbs. lateral load per astener

    Lateral loads or nails in wide ace o rim board:

    Design per 2012 & 2005 NDS using Douglas Fir-Larch values

    P

    aGe n Gi n r d L u B r Q u i c k Gu i d juLy 2013GrGia-PaciFic Wd Prduc 3

    Modulus o Elasticity E = 2.0 x 106 psi

    Shear Modulus o Elasticity G = 0.125 x 106 psi

    Flexural Stress Fb2 = 2,900 psi

    Horizontal Shear Fv = 285 psi

    CompressionPerpendicular to Grain

    Fc = 845 psi

    1. No increase is allowed to E, G or Fc or duration o load.

    2. For depths (d) other than 129 multiply Fb by (12/d)1/9 or 2.0E.

    PL--u FW

    Georgia-Pacics FASTBeam

    design sotware is an

    application package thathelps determine the most

    cost-ecient and eective

    alternatives or use o

    Georgia-Pacic engineered

    lumber products, while

    FASTPlan raming sotware

    analyzes and designs foor

    members, and generates a

    complete material list.

    2.0 GP Lam allowable edgewise design stresses1

  • 7/27/2019 122183.pdf

    4/4

    GP Lam LVL

    GP Lam LVL

    GP Lam LVL

    Wood I Beam Joists

    Wood I Beam Joist

    Wood I Beam Joist

    Wood I Beam Joists

    FiberStrong Rim Board

    FiberStrong Rim Board

    GP Lam LVL

    Wha yu dn ar

    Georgia-Pacic Wood Products LLC

    133 Peachtree Str eet

    Atlanta, Georgia 30303

    877-437-9759

    * See manuacturers warranty or ter ms, conditions and limitations (www.gp.com/build).

    Georgia-Paciic, GP, Wood I Beam, GP Lam, FiberStrong, FiberGuard, FASTBeam, FASTPlan, and What You Dont See Matters aretrademarks owned by or licensed to Georgia-Paciic Wood Products LLC. The NAHB Research Center Green Approved logo is atrademark o the NAHB Research Center. Sustainable Forestry Initiative and SFI are trademarks o Sustainable Forestry Initiative, Inc.

    2013 Georgia-Paciic Wood Products LLC. All rights reserved. Printed in the U.S.A. 6/13 TM Lit. Item #122183.

    This NAHB Research CenterGreen Approved mark is yourassurance that a product iseligible or points toward NationalGreen Building Certifcation. Visitwww.GreenApprovedProducts.com

    Engineered lumber rom Georgia-Pacifc is made rom wood thatis sourced through a system that is third-party certifed to theSustainable Forestry Initiative (SFI) procurement standard.

    ngineered For Performance

    istribted B: