121120 support & Technical - Duro...kango & hilti electric order line; 01909 552470 duro support ......
12
duro support merchandisers, support services, technical information, terms & conditions 121 support & Technical
Transcript of 121120 support & Technical - Duro...kango & hilti electric order line; 01909 552470 duro support ......
breaker steels120
KANGO & HILTI ELECTRIC
ORDER LINE; 01909 552470 www.duro-diamonds.com
duro supportmerchandisers, support services, technical information, terms & conditions
121
support& Technical
122merchandisinginstore support
ORDER LINE; 01909 552470 www.duro-diamonds.com
(A) Dp-DST-13L 13 litre water tankDURO can provide a complete merchandising or point of sale solution for every showroom environment, regardless of space availability or restrictions.
Both one metre and 1/2 metre width tool bars are available from DURO. DURO has a solution for every type and size of distributor showroom.
ORDER LINE; 01909 552470 www.duro-diamonds.com
123merchandising
instore support
Dp-DST-13L 13 litre water tank(A)
DURO have developed a fully modular point of sale system that can cater for all product types. These units can be free standing, wall mounted or part of a tool wall system - offering the distributor a full list of options.
DURO can supply the following in-store support items:
• product range cards • product posters • individual product cards, • application charts • literature • product videos
.....and much more to further enhance the appearance of our merchandising units, and more importantly provide the customer with more detailed and informative product, application and performance recommendations.
DURO also offer tool bar / slat wall components that enable distributors to utilise available in store space with as much product as possible. Angled hooks for blades, modular unit hanging shelves & more options are available.
CORE DRILL LECTURNS
FREE-STANDING / COUNTER TOP OR WALL MOUNTED MODULAR UNITS - OPTIONAL BRACKETS AVAILABLE
COUNTERTOP &WALL HANGING
UNITS
SMALL METALPOINT OF SALE
SMALL CARD POINT OF SALE UNITS
Dp-DST-13L 13 litre water tank(A)bespoke TOOLBAR INSTALLATIONSDURO can work with individual distributors to create bespoke toolbar and point of sale installations.
We have the ability to design & install personalised / dual branded toolbar backdrops with high impact visuals to fully promote any cross section of DURO products stocked.
This is a joint venture with DURO distributors and involves working closely with store managers and marketing teams.
In addition to this DURO can design in-store dual branded product / promotions posters and sales literature.
Ask your DURO Area Sales Manager for further information on how we can help you develop your DURO instore presence.
abrasives terminologybonded abrasives - coated abrasives
• Bonded abrasive wheels are manufactured by bonding thousands of abrasive grains together to form a single cutting tool.
• The abrasive wheel begins to cut and grind material away when it comes in contact with the target surface.
• As it grinds and cuts, the material being worked on fractures the surface of the grains and wears the bond exposing fresh grains in the process.
• The wheel is slowly worn away as more and more grains are exposed and then released during the cutting process.
• Coated abrasives are products that have a solid backing with a single layer of abrasive grain bonded to its surface.
• The grain starts to cut and grind the target material when it comes in contact with it.
• The grains fracture during the cutting process to form new cutting points. This extends the life of the abrasive.
• Eventually the grains will be fractured to the point where they are no longer exposed above the bond - at this point they can no longer effectively cut and grind and the abrasive needs replacing.
BOnded abrasives coated abrasives
types of abrasive grain used in duro abrasivesAluminium Oxide - Grain that is tough and durable. Used in bonded abrasives for - cutting, grinding and finishing of metal Used in coated abrasives for - cutting, grinding and finishing metal, wood and coatings
Zirconia - Grain that is tough and durable with a fine crystal structure Used in bonded abrasives for - rugged stock removal of metal Used in coated abrasives for - rugged stock removal of metal and wood
Silicon Carbide - Grain that is very hard and brittle Used in bonded abrasives for - cutting, grinding and finishing of concrete and very hard / very soft metals Used in coated abrasives for - very fine finishing of metals and coatings
diamond blade terminologycut through industry terminology -
specify the correct blade to match your application
narrow gullets continuous turbo rim cooling holes
conical segments 30 degree gullets key hole gullets
turbo segmented deep draft segments wide gullets
inclined wedge segment reinforced flange
If a diamond blade has narrow gullets there will be less chipping of material and a slight reduction
in vibration.
If a diamond blade has a continuous turbo rim then there will be less chipping than with segmented
blades and faster cutting due to the castellation of the rim. This clears debris quicker and keeps the blade
cool by trapping air in motion.
Cooling holes in a blade as the description says, will keep
the steel core cool and will prevent distortion of that core. Keeping the diamond matrix cool in segments
will improve speed and life.
Conical segments will lower vibration thanks to the consistent gap between
the segments. There will be an increase in product life thanks to the
greater size of the segment and a decrease in noise due to there being
less air distortion in motion.
In line, 30 degree gullets help clear debris faster and they
improve life as a result.
Similar to narrow gullets, key-hole gullets result in less
chipping of the material being cut and a reduction in vibration levels.
Similar to continuous turbo rims, there is less chipping of the
material and faster cutting thanks to the castellation of the segment.
The debris is cleared quicker and the blade is kept cooler.
Deep draft segments give the diamond blade undercut protection, whilst cutting in abrasive materials such as asphalt or abrasive stone.
Wide gullets clear debris faster when cutting through abrasive materials.
Inclined wedge segments give the diamond blade undercut protection,whilst cutting in abrasive materials such as asphalt or abrasive stone.
A reinforced flange gives the diamond blade more stability under extreme use and keeps the steel core in line, therefore giving a cleaner, straighter cut.
MICRO segmentsUsing 25mm micro segments reduces
the contact area with the material and therefore increases cutting speed. The increased number of
gullets also improves the clearance of debris, extending the life of the blade.
abrasives terminology
BLADE APPLICATION GUIDE APPLICATION BY LABEL COLOUR CODe
METALS
HARD MATERIALS
ASPHALT
CONCRETE
ASPHALT
METAL/STONE
ASPHALT
CONSTRUCTION MATERIALS
UNIVERSAL CONCRETE
HARD MATERIALS
BUILDING MATERIALS
All DURO diamond blades (except DURO BASE) have a colour coded bandon the label to give a quick reference to the material application type.
Please ensure that your blade selection matches the material you intend to cut - however, this is a guide only and some blades may crossover more materials than suggested below.
WhiteFor highly dense and very hard materials such as granite, slate, Class A engineering bricks, clay products, flint concrete, heavily reinforced concrete.
GREY For universal use in most hard to medium hard materials such as reinforced concrete, Class B engineering bricks, kerbs, lintels, beams, cast pipes, flags and general building materials.
Yellow For the longest lifetimes with high in-feed rates in the widest possible range of construction materials, from the hardest engineering bricks & reinforced concretes to paviors, soft blocks and roof tiles - and even the ability to occasionally cut asphalt - all in one blade.
Black For extremely abrasive materials such as soft cement screed, lightweight concrete & cellular block, abrasive sandstone and grit stone, as well as tarmac and hot rolled asphalt on roads and pavements.
Red For all construction site materials including, but not exclusively, types of metal. Uniquely shaped with air cooling holes drilled into the steel core & use of a very large diamond grit.
BOTH GREY & BLACKFor both concrete and asphalt applications. Either application is possible exclusively or jointly, with similar results.
FOUR COLOUR CODESFor universal applications. Cut almost any material, excluding heavy metal applications (above 10mm gauge) with absolute ease and security and very high life times. These products are of the very highest level of performance.
DURO BASE Entry line blades for universal use on most medium to hard building materials, including lightly reinforced concrete, medium hard bricks and stones.
300DUSCMCONSTRUCTION MATERIALS / BAUMATERIALIEN
CONSTRUCTION MATERIALS
OBSERVE SAFETY RECOMMENDATIONS / FAITES ATTENTION AU CONSEILS DE SECURITE BEOBACHTE DIE SICHERHEITSVORSCHRIFT / LET OP DE VEILIGHEIDSVOORSCHRIFTEN
USE WET OR DRY / USAGE A SEC OU SOUS ARROSAGE /VERWENDE TROCKEN ODER NASS /
GEBRUIK DROOG OF NATISO 9001 - EN13236
300 x 2.6 x 20.0012" x 1/8" x 25/32"100m/s 6400rpm
CONCRETE
DURO SUPPORT300DUSCMCONSTRUCTION MATERIALS / BAUMATERIALIEN
CONSTRUCTION MATERIALS
OBSERVE SAFETY RECOMMENDATIONS / FAITES ATTENTION AU CONSEILS DE SECURITE BEOBACHTE DIE SICHERHEITSVORSCHRIFT / LET OP DE VEILIGHEIDSVOORSCHRIFTEN
USE WET OR DRY / USAGE A SEC OU SOUS ARROSAGE /VERWENDE TROCKEN ODER NASS /
GEBRUIK DROOG OF NATISO 9001 - EN13236
300 x 2.6 x 20.0012" x 1/8" x 25/32"100m/s 6400rpm
product identificationBRAND NAME
DIRECTION OF ROTATION.
BARCODE.
PRODUCT APPROVAL BY ORGANISATION FOR THE SAFETY OF ABRASIVES.
EUROPEAN MANUFACTURING STANDARD.
MATERIAL APPLICATION.
DURO SPECIFICATION.
DURO ISO CERTIFICATION
MACHINE USEPICTOGRAMS
BLADE DIMENSIONS& MAX WORKING
SPEED
USE & SAFETY PICTOGRAMS
BRAND NAME
PRODUCT APPROVAL BY ORGANISATION FOR THE SAFETY OF ABRASIVES.
MAX SPEEDRPM
MATERIALAPPLICATION
DURO SPECIFICATION
EUROPEAN MANUFACTURING STANDARD.
USE & SAFETY PICTOGRAMS
BLADE DIMENSIONS USAGE
HINTS
DIRECTIONOF ROTATION
UNIQUE SERIAL NUMBER
DURO ensure full product identification on all product labels and product etching.
PERFORMANCE LEVEL.
blade label
blade etching
BLADE APPLICATION GUIDE APPLICATION BY LABEL COLOUR CODe
PERFORMANCE LEVEL.
128application chartsdiamond blades
IMPORTANT USAGE INFORMATIONOn these pages and the one following you will find product application guides, a converter for cross referring blade speeds from m/s to rpm and vice versa, and a guide to recommended speed settings when using core drills. For further assistance on any technical aspect please contact your DURO representative.
PG NO. GLASS / REINFORCED PLASTIC
FIBREGLASS MARBLE STEEL BARS, PIPE & SECTIONS SG & GREY IRON PORCELAIN & HARD TILES CERAMIC TILES INDIAN STONE GRANITE SLATE CLASS A ENGINEERING BRICKS CLAY PAVIORS / PIPES / TILES FLINT AGGREGATE PRODUCT CLASS B ENGINEERING BRICKS HEAVILY REINFORCED CONCRETE MEDIUM REINFORCED CONCRETE LIGHTLY REINFORCED CONCRETE CONCRETE HARD YORK STONE QUARTZITE LONDON BRICK HARD CONCRETE PRODUCTS KERBS / LINTELS / BEAMS CAST PIPES BRICKS / CONCRETE FLAGS HAND MADE BRICKS FACING BRICKS CONCRETE ROOF TILES SOFT CONCRETE PAVIORS SAND BASED PAVIORS GREEN CONCRETE CEMENT SCREED LIGHTWEIGHT CONCRETE BLOCK HOT ROLLED ASPHALT ABRASIVE SAND / GRITSTONE ASPHALT OVER CONCRETE ASPHALT ABRASIVE MORTAR
POLYURETHANE
HARD / DENSE MATERIAL
SOFT / ABRASIVE MATERIAL
DU
HB
23
DP
HB
23
DP
H
22 D
PU
/C
12
DS
BM
17
DU
/C
1314
10
15
DU
SC
M
14
DC
M
15
DP
A
20
DU
M-S
18
DA
21
DC
M-T
19
DP
CM
-T
18 D
PA
/C
11
DU
A/
C
10
DA
/C
11
DU
U/
C-S
DT
12
DU
A/
C-S
ILENT
DU
CM
-SILE
NT
DU
A-S
DT
20
DP
CM
-SH
AR
K
DS
BM
-PT
17
Highly suited Suitable with reservations Not Suitable
diamondBLADES
application chartsdiamond blades
129application charts
speciality and multi-purpose blades
DU
-CU
RV
EX
DP
T
DU
T
25 26 25
DP
M
DM
DS
M38 3938
DU
U/
C LO
OP
DU
-RIN
G
2827
GLASS / REINFORCED PLASTIC
FIBREGLASS MARBLE STEEL BARS, PIPE & SECTIONS SG & GREY IRON PORCELAIN & HARD TILES CERAMIC TILES INDIAN STONE GRANITE SLATE CLASS A ENGINEERING BRICKS CLAY PAVIORS / PIPES / TILES FLINT AGGREGATE PRODUCT CLASS B ENGINEERING BRICKS HEAVILY REINFORCED CONCRETE MEDIUM REINFORCED CONCRETE LIGHTLY REINFORCED CONCRETE CONCRETE HARD YORK STONE QUARTZITE LONDON BRICK HARD CONCRETE PRODUCTS KERBS / LINTELS / BEAMS CAST PIPES BRICKS / CONCRETE FLAGS HAND MADE BRICKS FACING BRICKS CONCRETE ROOF TILES SOFT CONCRETE PAVIORS SAND BASED PAVIORS GREEN CONCRETE CEMENT SCREED LIGHTWEIGHT CONCRETE BLOCK HOT ROLLED ASPHALT ABRASIVE SAND / GRITSTONE ASPHALT OVER CONCRETE ASPHALT ABRASIVE MORTAR
POLYURETHANE
Highly suited Suitable with reservations Not Suitable
PG NO.HARD / DENSE MATERIAL
SOFT / ABRASIVE MATERIAL
GLASS / REINFORCED PLASTIC
FIBREGLASS STEEL BARS, PIPE & SECTIONS SG & GREY IRON STEEL STAINLESS STEEL REBAR CAST IRON CARBON STEELS TOOLS STEELS NON-FERROUS METALS PORCELAIN/CERAMIC/HARD TILES INDIAN STONE GRANITE / MARBLE / SLATE CLASS A&B ENGINEERING BRICKS CLAY PAVIORS / PIPES / TILES FLINT AGGREGATE PRODUCT ALL CONCRETE TYPES HARD YORK STONE QUARTZITE ALL BRICK TYPES PAVIORS (ALL TYPES) CEMENT SCREED LIGHTWEIGHT CONCRETE BLOCK RUBBER WOOD (ALL TYPES) CARBON FIBRE RAILWAY SLEEPERS DUCTING TREE ROOTS / GROUNDWORK FLASHING / FLAT ROOFS GROUNDWORK PLASTICS PLASTER BOARD PVC CEMENT FIBRE BOARDS COMPOSITE BOARDS
POLYURETHANE
PG NO.
LAMINATE / MELANINE
DU
RB
DP
VB
42 48 46
PC
D-FB
-A
50
TILE CUTTING / CURVEX
SPECIALITYBLADES
MORTAR RAKING
DP
WB
94
DP
CN
G
MULTI APPLICATIONS
IMPORTANT USAGE INFORMATIONOn these pages and the one following you will find product application guides, a converter for cross referring blade speeds from m/s to rpm and vice versa, and a guide to recommended speed settings when using core drills. For further assistance on any technical aspect please contact your DURO representative.
DU
-MITA
L
44
multi-purposeblades
speciality BLADES
130application chartsDIAMOND BLADE SPEEDS & CORE DRILL APPLICATION CHARTS
SOFT / ABRASIVE MATERIAL
DIAMOND BLADE SPEED RECOMMENDATIONS
3,100
2,700
2,450
2,050
1,700
1,550
1,350 1,250
1,050
875
765
680
615
510
100
115
125
150
180
200
230
250
300
350
400
450
500
600
3,850
3,350
3,100
2,550
2,150
1,950
1,700
1,550
1,300
1,100
960
850
765
640
4,800
4,200
3,850
3,200
2,700
2,400
2,100
1,950
1,600
1,400
1,200
1,100
960
800
6,150
5,350
4,900
4,100
3,400
3,100
2,700
2,450
2,050
1,750
1,550
1,400
1,250
1,050
6,700
5,850
5,350
4,500
3,750
3,350
2,950
2,700
2,250
1,950
1,700
1,500
1,350
1,150
7,650
6,650
6,150
5,100
4,250
3,850
3,350
3,100
2,550
2,200
1,950
1,700
1,550
1,300
9,560
8,350
7,650
6,400
5,350
4,800
4,200
3,850
3,200
2,750
2,400
2,150
1,950
1,600
12,100
10,500
9,650
8,050
6,700
6,050
5,250
4,850
4,050
3,450
3,050
2,700
2,450
2,050
15,300
13,300
12,250
10,200
8,500
7,650
6,650
6,150
5,100
4,400
3,850
3,400
3,100
2,550
19,100
16,650
15,300
12,750 10,650
9,550
8,350
7,650
6,400
5,500
4,800
4,250
3,850
3,200
23,900
20,800
19,100
16,000
13,300
11,950
10,400
9,550
8,000
6,850
6,000
5,350
4,800
4,000
16ø
mm 20 25 32 35 40 50 63 80 100 125
Metres per second (m/s)
CLASS A ENGINEERING BRICKS
FLINT AGGREGATE COMMON
CLASS B ENGINEERING BRICKS
LIGHTLY REINFORCED CONCRETE
CONCRETE
HARD YORK STONE
LONDON BRICK
GENERAL HOUSE BRICK
HANDMADE BRICKS
FACING BRICKS
LIGHTWEIGHT CONCRETE BLOCK
BREEZE BLOCK
ABRASIVE SAND / GRIT STONE
DSDC(dry)
DDC(dry)
DPDC(dry)
DUSDC(dry)
CORE DRILL APPLICATIONS
HARD /DENSE
MATERIAL
SOFT / ABRASIVE MATERIAL
material type
CORE drill specification - dry / wet
DPWC(wet)
CORE SIZE
22mm
28mm
32mm
38mm
42mm
48mm
52mm
65mm
78mm
102mm
107mm
117mm
127mm
152mm
158mm
RPM 380 440 520 570 625 750 860 1030 1280 1400 1600 1760 1900 2380 3000
• Speed may be adjusted to suit site conditions. • For very abrasive materials an increase
in drill speed (rpm) will prolong life.• For harder materials, decrease the
drill speed to prevent overheating.• Machine and material are the controlling
factors to the life and speed of the core.• Ultimately, machine and operator determine
the overall performance.
DRY CORE DRILL SPEED RECOMMENDATIONS
Highly suited Suitable with reservations Not Suitable
CONDITIONS OF SALE – DURO UK Limited1. Definitions1.1 "Buyer" means the person who buys or agrees
to buy the goods from the seller1.2 "Conditions" means the terms and conditions
of sale set out in this document and any special terms and conditions agreed in writing by the seller
1.3 "Delivery date" means the date specified by the seller when the goods are to be delivered
1.4 "Goods" means the articles which the buyer agrees to buy from the seller
1.5 "Price" means the price for the goods excluding carriage, packing, insurance and VAT
1.6 "Seller" means DURO UK Limited of Sheffield in the county of South Yorkshire.
2. Conditions Applicable2.1 These conditions shall apply to all contracts for
the sale of goods by the seller to the buyer to the exclusion of all other terms and conditions including any terms of purchase or similar documentation supplied by the buyer at point of order.
2.2 All orders for goods shall be deemed to be an offer by the buyer to purchase goods pursuant to these terms.
2.3 Acceptance of delivery of goods shall be deemed conclusive evidence of the buyer’s acceptance of these conditions.
3. Price & Payment3.1 The price shall be the sellers quoted price. The
price is exclusive of VAT at the current rate.3.2 Payment of the price and VAT shall be due and
payable on the date shown on the invoice. Time for payment shall be of the essence.
3.3 If the buyer is a partnership, and fails to pay the price in accordance with the seller’s terms as noted by the date specified on the invoice, the partners shall be jointly and severally liable to pay to the seller any unpaid invoices addressed to the buyer. Any demand for payment by the seller to any one or more of the partners of the buyer, shall be deemed to be a demand made to all such persons as are jointly and severally liable upon the default of the buyer. The seller shall be at liberty to release or discharge from liability any one or more of the partners of the buyer, or to compound with, accept compositions from or make any other arrangements with any of the partners, without in consequence releasing or discharging any other party which is subject to the seller’s conditions, or otherwise prejudicing or affecting the seller’s rights and remedies against such party.4. The Goods4.1 The quantity and description of the goods shall
be as set out in the seller’s quotation. 5. Warranties and liability5.1 The seller warrants that the goods will at the
time of delivery correspond to the description given by the seller.
5.2 It is the responsibility of the buyer to return any faulty goods sufficiently packaged so as to avoid damage in transit, along with the original documentation to the seller’s address shown in clause 1.6 above. No refund will be issued until the goods are received as aforesaid.
5.3 In the event that upon inspection or testing the returned goods are found to be free of any faults, the seller may refuse to issue a full refund or may make a reasonable charge for time spent
6. Delivery of Goods6.1 Delivery of goods shall be made to the buyer’s
address or as instructed by the buyer on the delivery date. The buyer shall make all arrangements to accept delivery of the goods whenever they are tendered for delivery.
6.2 While the seller will endeavour to deliver the goods by any date or within any period agreed upon, such dates and periods are only estimates given in good faith and the seller will not be liable for any failure to deliver by such a date or within such a period. The seller will also not be liable for any costs arising from such failure.
7. Acceptance of Goods7.1 The buyer shall be deemed to have accepted
goods 48 hours after delivery to the buyer.7.2 After acceptance the buyer shall not be entitled
to reject goods, which are not in accordance with the contract.
8. Title and Risk8.1 The goods shall remain the property of the seller
until:8.1.1 The buyer has paid for the goods in full including
VAT at the current rate.8.1.2 No other sums whatever shall be due from the
buyer to the seller.8.2 The goods shall be at the buyers risk as from
delivery. 8.3 Until title of the goods passes to the buyer in
accordance with clause 8.1, the buyer shall hold the goods and each of them on a fiduciary basis as bailee for the seller. The buyer shall store the goods (at no cost to the seller) separately from all other goods in its possession and marked in such a way that they are clearly identifiable as the seller’s property.
8.4 Not withstanding that the goods (or any of them) remain the property of the seller, the buyer may sell or use the goods in the course of the buyers ordinary business at full market value for the account of the seller. Any such sale or dealing shall be a sale or use of the seller’s property by the buyer on the buyer’s own behalf and the buyer shall act as principal whilst making such sales or dealings. Until property of the goods passes to the buyer the entire proceeds of sale or otherwise of the goods shall be held in trust for the seller and shall not be mixed with any other money or paid into any overdrawn bank account and shall be at all material times identified as the sellers money.
8.5 The seller shall be entitled to recover the price including VAT not withstanding that the property in any of the goods has passed from the seller.
8.6 Until such time as the property of the goods transfers to the buyer from the seller, the buyer shall upon request deliver such goods as have not ceased to be in existence or resold to the seller. If the buyer fails to do so the seller may enter upon any premises owned occupied or controlled by the buyer where the goods are situated and repossess the goods. On the making of such a request the rights of the buyer under clause 8.4 shall cease.
8.7 The buyer shall not pledge or in any way charge by way of security for any indebtedness any of the goods, which are the property of the seller. Without prejudice to the other rights of the seller, if the buyer does so all sums whatever owing by the buyer to the seller shall forthwith become due and payable.
8.8 The buyer shall insure and keep insured the goods to the full price against "all risks" to the reasonable satisfaction of the seller until the date that the property of the goods passes to the buyer and shall whenever requested by the seller produce a copy of the policy of insurance. Without prejudice to the other rights of the seller, if the buyer fails to do so all sums whatever owing by the buyer to the seller shall forthwith become due and payable.
8.9 The buyer shall promptly deliver the prescribed particulars of this contract to the registrar in accordance of the companies act 1985 part XII as amended. Without prejudice to the other rights of the seller, if the buyer fails to do so all sums whatever owing by the buyer to the seller shall forthwith become due and payable.
9. Remedies of Buyer9.1 Where the buyer rejects any goods then the
buyer shall have no further rights whatever in respect of the supply to the buyer of such goods or the failure by the seller to supply goods which conform to the contract of sale.
9.2 Where the buyer accepts or is deemed to have accepted any goods then the seller shall have no liability whatever to the buyer in respect of those goods.
9.3 The seller shall not be liable to the buyer for late delivery or short delivery of the goods.
The provisions of this clause shall apply to rights claims or liability arising directly, consequently or otherwise.
10. Proper Contract of Law10.1 This contract is subject to the law of England
and Wales.11. Order Value and Carriage Terms• Minimum carriage paid order value is £150.00
net for most mainland postcodes. • Ireland, Isle of Man, Channel Islands and other UK postcodes - minimum carriage paid order value is £250 net.• Standard transportation will be NEXT WORKING
DAY.• Alternative transportation services are available
on all orders as detailed below: (net values) º NEXT WORKING DAY - orders under £150.00
- £9.00 - (FREE OF CHARGE over £150.00) º NEXT WORKING DAY before 12.00 noon
- £12.00 (£6.00 for orders over £150.00) º NEXT WORKING DAY before 10.30a.m.
- £17.00 (£8.00 for orders over £150.00) º NEXT DAY Saturday delivery before 12.00 noon
- £34.00 (£25.00 for orders over £150.00 net)• Every effort will be made to despatch orders received before 4.30pm on the same day - however this cannot be guaranteed. • The above timings do not apply to Ireland, Isle of Man and some Scottish regions. These are generally a 2 day service, but this cannot be guaranteed. • Delivery times for Channel Islands are generally 3 days but this cannot be guaranteed.
© DURO UK - JUNE 2018
TERMS AND CONDITIONSTERMS AND CONDITION OF SALE
PLEASE CONTACT
YOUR DISCOUNT
131
GDPR COMPLIANCEThe GDPR (General Data Protection Regulation) strengthens data protection rules across all of the European Economic Area and gives residents greater control over their personal data. DURO have taken steps to ensure the full security of any data that we hold and are fully compliant in the GDPR regulations that have come into force on 25th May 2018. Please contact our compliance manager on 01909 552470 with any questions that may have regarding this. Our full data protection policy can be found at www.duro-diamonds.com.
DURo UK
WWW.DURO-DIAMONDS.COM
A RANGE OF PNEUMATIC CONSTRUCTION TOOLS NOW AVAILABLE FROM OUR SISTER COMPANY - YOKOTA UK LTDASK YOUR DURO REPRESENTATIVE FOR FURTHER DETAILS ON THIS EXTENSIVE RANGE OF HIGH QUALITY TOOLS
DURO-06-2018
EUROPEAN OFFICEDURO EUROPE nv / NIJVERHEIDSLAAN 12G / 3200 AARSCHOT / BELGIUM
T: +32 (0)16 94 60 60 / F: +32 (0)16 94 60 69 / E: [email protected]
DURO UK LTD / LOW COMMON ROAD BROOKLANDS PARK INDUSTRIAL ESTATE
DINNINGTON / SHEFFIELD / S25 2RJ
T: 01909 552470F: 01909 552472
