121 master catalog

MANUFACTURERS Products OfferedAEROQUIP HOSE, FITTINGS, ADAPTERS, FLEXMASTER JOINTSALEMITE FLUID CONTROL VALVES, HOSE REELSBAND-IT PUNCH TYPE CLAMPS & TOOLS BOSTON AIR, WATER, FUEL, CHEMICAL HOSEBRAND HYDRAULICS VALVES, STACKABLE, MONO BLOCKBUCHER MONOBLOCK & SECTIONAL DIRECTIONAL CONTROL VALVESC.H.I . DISCHARGE & SUCTION HOSE WITH CAM-LOCK FITTINGSC.H.I. BRASS PUSH-TO-CONNECT AND COMPRESSION DOT AIR FITTINGSCROSS MFG. CYLINDERS, VALVES, PUMPSDELTROL NEEDLE, FLOW CONTROL, CHECK & CARTRIDGE VALVESDIXON VALVES AND COUPLINGS, CAMLOCKSDONALDSON HYDRAULIC FILTERS & COMPONENTSDYNAMIC PRESSURE GAUGES, HIGH PRESSURE BALL VALVESFILL-RITE FUEL TRANSFER PUMPS & METERSFOSTER WATER & AIR DISCONNECTSGRACO BULK FLUID AND GREASE DISPENSING AIR PUMPSHANNAY HOSE REELSHUSKY FUEL NOZZLES & ACCESSORIESHYDRAULICS INC. FULL TIME HYDRAULIC 3000psi LIVE SWIVELSPERMCO GEAR PUMPS, MOTORS, & DUMP PUMPSRAM-PAC PORTABLE POWER UNITS, PUMPS, & RAMSSUPER SWIVELS LIVE SWIVELS WATER & AIR TO 5000psiSYNFLEX THERMOPLASTIC HOSE / CONDUCTIVE & NON-CONDUCTIVEVOSS METRIC ADAPTERS & FITTINGSWHITE DRIVE PRODUCTS MOTORS, LOW SPEED HIGH TORQUEYUKEN SOLENOID OPERATED DIRECTIONAL CONTROL VALVES

D01, D03, D05 SIZESINTERCHANGEABLE WITH VICKERS, PARKER, REXROTH, NACHI, ETC...

WHITEWHITEDRIVE PRODUCTSDRIVE PRODUCTS

DonaldsonFilters

084-F-07

Central Hydraulics Inc.Specializing in OEM sales and repairs

of hydraulic hose, pumps, motors,cylinders, valves, & components

1-800-264-9571

Central Hydraulics Inc. 1-800-264-9571 DAYTONA BEACH COCOA LEESBURG OCALA 386-253-2568 321-639-9967 352-323-8008 352-840-0842

www.CentralHydraulics.com

Central Hydraulics Inc.Specializing in wholesale and OEM sales of hydraulic hose,

pumps, motors, cylinders, valves, & components1-800-264-9571

DAYTONA BEACH 386-253-2568 (Fax)386-257-5728

COCOA 321-639-9967 (Fax)321-636-3156

LEESBURG 352-323-8008 (Fax)352-323-8533

OCALA 352-840-0842 (Fax)352-840-0858


060-F-01Part # Max. Operating Pressure (psi) Min. Bend Radius (in)GH663-4 3250 4.00GH663-6 3000 5.00GH663-8 2500 7.00GH663-12 1800 9.50GH663-16 1300 12.00

One Wire SAE100R1AT Type S, EN853 1SN, ISO 1436-1 Type 1SN-40°F. To +212°F. Uses: Hydraulic system service with petroleum and water-glycol base fluids, for general industrial service.

Part # Max. Operating Pressure (psi) Min. Bend Radius (in)GH781-4 5750 2.00GH781-6 5000 2.50GH781-8 4250 3.50GH781-10 3625 4.00GH781-12 3125 4.75GH781-16 2500 6.00GH781-20 2250 8.25GH781-24 1800 10GH781-32 1300 12.5

Two Wire Meets or Exceeds SAE 100R16 Type S, EN857 2SC, ISO 11237-1 Type 2SC-40°F. To +212°F. Uses: Hydraulic system service with petroleum and water-basefluids, for general industrial service.

Part # Max. Operating Pressure (psi) Min. Bend Radius (in)GH793-4 5750 4.00GH793-6 5000 5.00GH793-8 4250 7.00GH793-10 3625 8.00GH793-12 3125 9.50GH793-16 2500 12.00GH793-20 2250 16.5GH793-24 1800 20GH793-32 1300 25

Two Wire Meets or exceeds SAE 100R2AT Type S, EN853 2SN, ISO 1436-1 Type 2SN-40°F. To +212°F. Uses: Hydraulic system service with petroleum and water-basefluids, for general industrial service.



061-F-01

Part # Max. Operating Pressure (psi) Min. Bend Radius (in)GH195-4 5750 4.00GH195-6 5000 5.00GH195-8 4250 7.00GH195-10 3250 8.00GH195-12 3000 9.50GH195-16 2500 12.00

Two Wire Meets or Exceeds SAE 100R2AT Type S, EN853 2SN, ISO 1436-1 Type 2SN-40°F. To +300°F. Uses: Hydraulic system service with petroleum, fire resistantand water base fluids, fuel and lubricating systems.

Part # Max. Operating Pressure (psi) Min. Bend Radius (in)GH493-6 4000 5.00GH493-8 4000 7.00GH493-10 4000 9.50GH493-12 4000 9.50GH493-16 4000 12.00GH493-20 3000 16.5GH493-24 2500 20GH493-32 2500 25

Four Spiral Wire SAE 100R12, EN 856 Type R12-40°F. To +250°F. Hydraulic system service with petroleum and water-basefluids, for general industrial service.

Part # Max. Operating Pressure (psi) Min. Bend Radius (in)FC254-12 6250 11.00FC254-16 5000 12.00

Four Heavy Spiral Wire Exceeds SAE 100R11, EN 856 4SP-40°F. To +250°F. Hydraulic system service with petroleum and water-base fluids, for general industrial service.

Part # Max. Operating Pressure (psi) Min. Bend Radius (in)FC273-20 5000 16.50FC273-24 5000 20.00

Six Spiral Wire SAE 100R13, EN 856 TYPE R13, ISO 3862 Type R13-40°F. To +250°F. Hydraulic system service with petroleum and water-base fluids, for general industrial service.


COCOA 321-639-9967 (Fax)321-636-3156

LEESBURG 352-323-8008 (Fax)352-323-8533

OCALA 352-840-0842 (Fax)352-840-0858





COCOA 321-639-9967 (Fax)321-636-3156

LEESBURG 352-323-8008 (Fax)352-323-8533

OCALA 352-840-0842 (Fax)352-840-0858


073-F-01

-55°F. To +300°F. *Except air +250°F.Part # Max. Operating Pressure (psi) Min. Bend Radius (in)

FC300-4 3000 3.00FC300-5 3000 3.38FC300-6 2250 4.00FC300-8 2000 4.62FC300-10 1750 5.50FC300-12 1500 6.50FC300-16 800 7.38FC300-20 625 9.00FC300-24 500 10.50FC300-32 300 13.25

Single Wire Braid Exceeds SAE100R5

-40°F. To +300°F.Part # Max. Operating Pressure (psi) Min. Bend Radius (in)

FC234-5 1500 1FC234-6 1500 1.25FC234-8 1250 1.75FC234-10 1250 2.25FC234-12 750 2.75FC234-16 400 3.5

High Temperature Fuel and Oil Fire Resistant USCG/MMT, NMMA/BIA

Textile Braid-40°F. To +300°F. *Except air +250°F. Water +180°F.

Part # Max. Operating Pressure (psi) Min. Bend Radius (in)FC332-4 250 3FC332-6 250 3FC332-8 250 5FC332-10 250 6FC332-12 250 7

SYNFLEXNon Conductive Single and Twin-Line Hose


www.CentralHydraulics.com 081-F-01

Features• SAE J517,100R7 Non-Conductive Hose Construction• Less Than 50 Micro-Amperes Leakage When Subjected to 75,000 volts/ft for 5 Minutes• Temperature Range: -65°F to 212°F (-54°C to 100°C) or to 140°F (60°C), With Water-Based or Fire Resistant Fluids• Flexible in Low Temperatures• Abrasion Resistant Cover• UV Resistant Cover• Can Use Both Permanently Attached and Reusable Couplings• Long Continuous Lengths

Applications• Electric Utility Truck Hydraulic Systems• Mobile Equipment (Picker, Utility Vehicles)

Construction• Orange Non-Perforated Non-Stick Polyurethane Cover• Braided Synthetic Fiber Reinforcement• Polyester Core Tube

SYNFLEX® 37AL NONCONDUCTIVE SAE 100R7 3000 PSI WPSYNFLEX® 37AL NONCONDUCTIVE SAE 100R7 3000 PSI WP

Central Hydraulics Inc.

NPT (National Pipe Thread) to NPT Adapters

094-F-01



20832081

2040

2082

2045

2046

2096

2049

2088

2085

2089

2047

2252

2048

2092

2087

2091

2090

2080

Many other styles availableThese are the most popular


NPT (National Pipe Thread) to JIC (37° Flare) Adapters

095-F-01



2021


2240

2022

2239

2242

9100

20232024

202411

2250

2249

2028

2025

2030 2031


096-F-01



2246

2066

ORB (O-Ring Boss)

to JIC(37° Flare)Adapters

NPT(National Pipe Thread)

to ORB(O-Ring Boss)Adapters

2216

2067

2068

206801

Split Flange (Code 61)to JIC (37° Flare)

Adapters


202702

206209

203005

203003

500025Split Flange (Code 62)to JIC (37° Flare)

Adapters

FF5541500023 FF5539

FF5540500024

2061

2062


JIC (37° Flare) Union Adapters

097-F-01Central Hydraulics Inc. 1-800-264-9571

DAYTONA BEACH COCOA LEESBURG OCALA 386-253-2568 321-639-9967 352-323-8008 352-840-0842


2027


2041

900599

203102

2020

210292

2406

207020392043

2071

504095

500454

2033

203101

DAYTONA BEACH 386-253-2568 (Fax)386-257-5728COCOA 321-639-9967 (Fax)321-636-3156LEESBURG 352-323-8008 (Fax)352-323-8533OCALA 352-840-0842 (Fax)352-840-0858


089-F-01

Central Hydraulics Inc.O-Ring Face Seal X Split Flange Adapter

90°O-Ring Face Seal X Split Flange Adapter

High-grade silicone rubber bonded to fiberglass sleeving

We have the best pricing anywhere!Sizes ranging from ½” to 3½”

Designed to protect hoses, wires and cables from the hazards of high heat and occasional flame. It protects continuously to 500°F and will withstand a molten splash at 2200°F. Made of either knitted or braided fiberglass yarns in a flexible substrate that is then coated with high-grade silicone rubber.Resistant to hydraulic fluids, lubricating oils, and fuels, it insulates against energy loss in piping and hosing; protects employees from burns; and allows “bundling” of wires, hoses, and cables. The braided version allows qualified hose assemblies to pass AS1055D testing under stated flow and pressure conditions.





090-F-01

Central Hydraulics Inc.We are one of the largest stocking distributors of White brand hydraulic motors and parts in the U.S.

&

We can replace your Char-Lynn, TRW Ross, Parker, Danfoss, & others!

Directional Control Valves12v – 24v – 110v – 220vD01 – D03 – D05 - etc...



088-F-01


Subplates, manifolds, and header

blocks

We can interchange Vickers, Parker, Rexroth, Nachi, etc...



Central Hydraulics Inc.Gear Pumps

SAE A - 2 BOLT FLANGE MOUNT-12 O-RING BOSS INLET -10 O-RING BOSS OUTLET

3,000 RPM MAX.

5/8” KEYED SHAFT

5/8” 9 TOOTH SPLINED SHAFT

102-F-02

PART NUMBER DESCRIPTIONCGP GP-F20-06-P-A .36 CUBIC INCH 3,650 MAX PSI C.C.W. 2.81CGP GP-F20-06-P-C .36 CUBIC INCH 3,650 MAX PSI C.W. 2.81CGP GP-F20-08-P-A .48 CUBIC INCH 3,650 MAX PSI C.C.W. 3.74CGP GP-F20-08-P-C .48 CUBIC INCH 3,650 MAX PSI C.W. 3.74CGP GP-F20-10-P-A .61 CUBIC INCH 3,650 MAX PSI C.C.W. 4.75CGP GP-F20-10-P-C .61 CUBIC INCH 3,650 MAX PSI C.W. 4.75CGP GP-F20-12-P-A .73 CUBIC INCH 3,650 MAX PSI C.C.W. 5.69CGP GP-F20-12-P-C .73 CUBIC INCH 3,650 MAX PSI C.W. 5.69CGP GP-F20-14-P-A .85 CUBIC INCH 3,650 MAX PSI C.C.W. 6.62CGP GP-F20-14-P-C .85 CUBIC INCH 3,650 MAX PSI C.W. 6.62CGP GP-F20-16-P-A .97 CUBIC INCH 2,900 MAX PSI C.C.W. 7.56CGP GP-F20-16-P-C .97 CUBIC INCH 2,900 MAX PSI C.W. 7.56CGP GP-F20-20-P-A 1.22 CUBIC INCH 2,900 MAX PSI C.C.W. 9.51CGP GP-F20-20-P-C 1.22 CUBIC INCH 2,900 MAX PSI C.W. 9.51CGP GP-F20-25-P-A 1.52 CUBIC INCH 2,900 MAX PSI C.C.W. 11.84CGP GP-F20-25-P-C 1.52 CUBIC INCH 2,900 MAX PSI C.W. 11.84

GPM @1800rpm

PART NUMBER DESCRIPTIONCGP GP-F20-06-S9-A .36 CUBIC INCH 3,650 MAX PSI C.C.W. 2.81CGP GP-F20-06-S9-C .36 CUBIC INCH 3,650 MAX PSI C.W. 2.81CGP GP-F20-08-S9-A .48 CUBIC INCH 3,650 MAX PSI C.C.W. 3.74CGP GP-F20-08-S9-C .48 CUBIC INCH 3,650 MAX PSI C.W. 3.74CGP GP-F20-10-S9-A .61 CUBIC INCH 3,650 MAX PSI C.C.W. 4.75CGP GP-F20-10-S9-C .61 CUBIC INCH 3,650 MAX PSI C.W. 4.75CGP GP-F20-12-S9-A .73 CUBIC INCH 3,650 MAX PSI C.C.W. 5.69CGP GP-F20-12-S9-C .73 CUBIC INCH 3,650 MAX PSI C.W. 5.69CGP GP-F20-14-S9-A .85 CUBIC INCH 3,650 MAX PSI C.C.W. 6.62CGP GP-F20-14-S9-C .85 CUBIC INCH 3,650 MAX PSI C.W. 6.62CGP GP-F20-16-S9-A .97 CUBIC INCH 2,900 MAX PSI C.C.W. 7.56CGP GP-F20-16-S9-C .97 CUBIC INCH 2,900 MAX PSI C.W. 7.56CGP GP-F20-20-S9-A 1.22 CUBIC INCH 2,900 MAX PSI C.C.W. 9.51CGP GP-F20-20-S9-C 1.22 CUBIC INCH 2,900 MAX PSI C.W. 9.51CGP GP-F20-25-S9-A 1.52 CUBIC INCH 2,900 MAX PSI C.C.W. 11.84CGP GP-F20-25-S9-C 1.52 CUBIC INCH 2,900 MAX PSI C.W. 11.84

GPM @1800rpm



Gear Pump Formulas

075-F-02

To figure out GPM at 1800rpm by measurements of the pump.

47xWx(2D-L)x (L-D) 2

= Cubic Inch

L = Length of Chamber

D= Gear O.D.

= Length of

tooth

Cubic inch x Speed 231

GPMx231 Speed

W

To figure out the GPM if you know displacement & speed.

To figure the cubic inch displacement if you have GPM & speed.

= GPM

Inch lbs of torque x RPM63024

To figure out the HP if you know the torque and speed of the motor.

= HP

Pressure x GPM1714

To figure out the HP required if you know the pressure and GPM of the pump.

= HP Required to drive the pump







Monobloc and sectional directional control valvesCustom designs available

We keep the monobloc styles in stock!


100-F-01

HDM11P – 2 spool

HDM11P – 3 spool

HDM11P – 4 spool

HDM11P – 5 spool

HDM11P – 6 spool

Part# 200061127007

Part# 200061137011

Part# 200061147007

Part# 200061157003

Part# 200061167007

HDM140 – 1 spool Part# 200051417006




Monoblock-8 O-Ring BossMax. 12 GPM3600PSI

Monoblock-10 O-Ring BossMax. 18 GPM5000PSI

Monoblock-8 O-Ring BossMax. 10 GPM3600PSI(SOLD SEPERATELY)6” HANDLE P/N 200702210190Detent Kit P/N 200768520010

(SOLD SEPERATELY)7-1/4” HANDLEP/N 200702220010Detent KitP/N 200968620140Power Beyond OptionP/N 200770000460

(SOLD SEPERATELY)6” HANDLE P/N 200702210190Detent Kit P/N 200768520010Power Beyond Option P/N 200527160201

101-F-02

Tandem Center 4-way (T4)- Powers cylinder or motor in both directions. Pump unloads to tank when spool is in neutral. Cylinder or motor blocked when spool is in neutral

HDM18 – 1 spool

HDM18 – 2 spool

HDM18 – 3 spool

HDM18 – 4 spool

Part# 200071818007

Part# 200071828010

Part# 200071838025

Part# 200071848007



3/4”NPT Spin-on Hydraulic FilterFlow Range to 30gpm.Up to 150psi

Single Filter Head:P561131

Many other sizes and styles available!

P562198

P562199

P565059

P5650608.6”5.4”



1¼”NPT Spin-on Hydraulic FilterFlow Range to 60gpm.Up to 150psi

Single Filter Head:P563268

Many other sizes and styles available!

P550388

P550387

P550251

P550252

Central Hydraulics Inc.Hydraulic Tie Rod Cylinders (HTR)

Hydraulic Tie Rod

076-F-02



140-F-02

119-F-01



Central Hydraulics Inc.Specializing in OEM sales of hydraulic hose, pumps, motors,

cylinders, valves, & components

1-800-264-9571

114-F-01



PART NUMBER DescriptionNORMALLY

OPEN

DSV2-080-2NOPUp to 5gpm

DSV2-100-2NOPUp to 16gpm

A cartridge valve designed with positive shut off to be used in load holding applications.OPERATION When de-energized, the DSV-2NOP is open to allow flow from ➁ to ➀ . When energized, the poppet closes to block flow from ➁ to ➀ . In this condition, the cartridge allows reverse flow from ➀ to .➁

2-Way 2-Position Cartridge Valves

POPPET TYPE(10v 12v 110v 220v)

Internal leakage: 5 drops/ min. max at 3000psi


CLOSED

DSV-080-2NCPUp to 5gpm

DSV2-100-2NCPUp to 16gpm

A cartridge valve designed with positive shut off to be used in load holding applications.OPERATION When de-energized, the DSV-2NCP acts as a check valve, allowing flow from ➀ to ➁ , while blocking flow from ➁ to ➀ . When energized, the poppet lifts to open the

➁ to ➀ flow path.

126-F-01


OPEN

DSV2-080-2NOSUp to 3gpm

DSV2-100-2NOSUp to 6gpm

A cartridge valve designed to operate as a bi-directional blocking valve.OPERATION When de-energized, the DSV-2NOS allows flow in both directions. When energized, the cartridge's spool shifts to block flow in either direction.


SPOOL TYPE(10v 12v 110v 220v)





CLOSED

DSV2-080-2NCSUp to 3gpm

DSV2-100-2NCSUp to 3gpm

A cartridge valve designed to operate as a bi-directional blocking valve.OPERATION When de-energized, the DSV-2NCS blocks flow in both directions. When energized, the cartridge's spool shifts to allow flow in either direction.

127-F-01

PART NUMBER Description

DSV2-080-3BUp to 5gpm

DSV2-100-3BUp to 6gpm

A cartridge valve designed as a three-way, spool-type, directional control valve.OPERATION When de-energized, the DSV-3B allows flow between ➁ and ➀ ,while blocking flow at ➂ . When energized, the cartridge’s spool shifts to allow flow between ➁ and ➂ while blocking flow at ➀ .




DSV-080-3SHOWN


DSV2-080-3Up to 4gpm

DSV2-100-3Up to 6gpm

A cartridge valve designed as a three-way, spool-type, directional control valve.OPERATION When de-energized, the DSV-3 allows flow between ➁ and ➀ ,while blocking flow at ➂ . When energized, the cartridge’s spool shifts to allow flow between ➀ and ➂ while blocking flow at ➁ .



129-F-01




OPEN

DSV2-080-4COUp to 3gpm

DSV2-100-4COUp to 6gpm

spool-type, directional control valve with all ports normally-open.OPERATION When de-energized, the DSV2-4CO allows flow from to , and from to .➂ ➁ ➃ ➀ When energized, the cartridge’s spool shifts and allows flow from to and from to ➂ ➃ ➁

.➀




DSV-080-4NCSHOWN


CLOSED

DSV2-080-4NCUp to 3gpm

DSV2-100-4NCUp to 6gpm

spool-type, directional control valve with all ports normally-closed.OPERATION When de-energized, the DSV2-4NC flow paths are blocked. When energized, the cartridge’s spool shifts and allows flow from to and from to ➂ ➃ ➁

.➀

130-F-01




DSV2-080-4TCUp to 3gpm

DSV2-100-4TCUp to 3gpm

spool-type, directional control valve, with two ports normally-closed and two ports normally-open.OPERATION When de-energized, the DSV2-4TC allows flow from to and is blocked at and .➃ ➀ ➁ ➂ When energized, the cartridge's spool shifts and allows flow from to and from to ➃ ➂ ➁

.➀




098-F-01



DEL F25B

DEL S450S1

DEL EDC35B

Flow Control Valves

Globe NeedleValves

Carbon Steel- 10,000psiEasy Read

Needle Valves


Ball Check ValvesCracking Pressure 1-2.5psi

DEL EF25S

Easy ReadFlow Control Valves

DEL EN25S

Normal OperatingPressuresBrass- 2,000psiCarbon Steel- 5,000psiStainless Steel- 5,000psi(UNLESS OTHERWISE SPECIFIED)

Many other

styles

available

SIZE BRASS CARBON STEEL1/8” EF10B EF10S1/4” EF20B EF20S3/8” EF25B EF25S1/2” EF30B EF30S3/4” EF35B EF35S1” EF40B EF40S

SIZE BRASS CARBON STEEL1/8” EN10B EN10S1/4” EN20B EN20S3/8” EN25B EN25S1/2” EN30B EN30S3/4” EN35B EN35S1” EN40B EN40S

SIZE CARBON STEEL1/4” S250S13/8” S350S11/2” S450S13/4” S650S11” S850S1

SIZE BRASS CARBON STEEL1/8” F10B F10S1/4” F20B F20S3/8” F25B F25S1/2” F30B F30S3/4” F35B ------------

SIZE BRASS CARBON STEEL1/8” EC10B ------------1/4” EC20B EC20S3/8” EDC25B EDC25S1/2” EDC30B EDC30S3/4” EDC35B EDC35S1” EC40B EC40S

YF-PACK



087-F-01


PART# YF-16-H-2U-2.2-H-20950IN STOCK AT WAREHOUSE!

240V AC3 phase power pack

Generates 170 - 3050 psi1.9-7.6 gpm

SPACE SAVING AND LOW NOISE



Central Hydraulics Inc.Ball Valves

(Full Port) Brass

103-F-01

PART NUMBER DESCRIPTIONBII SSBV2000-02 1/4” 2000PSI SS BALL VALVEBII SSBV2000-03 3/8” 2000PSI SS BALL VALVEBII SSBV2000-05 1/2” 2000PSI SS BALL VALVEBII SSBV2000-07 3/4” 2000PSI SS BALL VALVEBII SSBV2000-10 1” 1500PSI SS BALL VALVEBII SSBV2000-12 1-1/4” 1500PSI SS BALL VALVEBII SSBV2000-15 1-1/2” 1500PSI SS BALL VALVE

StainlessSteel (316)

All ball valves have locking handles, Teflon seals, and blow-out proof stems.

Female NPT threads

PART NUMBER DESCRIPTIONBVI BV025 1/4” 600PSI BRASS BALL VALVEBVI BV038 3/8” 600PSI BRASS BALL VALVEBVI BV050 1/2” 600PSI BRASS BALL VALVEBVI BV075 3/4” 600PSI BRASS BALL VALVEBVI BV100 1” 600PSI BRASS BALL VALVEBVI BV125 1-1/4” 600PSI BRASS BALL VALVEBVI BV150 1-1/2” 600PSI BRASS BALL VALVEBVI BV200 2” 600PSI BRASS BALL VALVEBVI BV250 2-1/2” 400PSI BRASS BALL VALVEBVI BV300 3” 400PSI BRASS BALL VALVEBVI BV400 4” 400PSI BRASS BALL VALVE

Central Hydraulics Inc.DOT air brake fittings DOT air brake fittings “Push-To-Connect” “Push-To-Connect”

PART NUMBER TUBE O.D.DQ62DOT04 1/4”DQ62DOT06 3/8”DQ62DOT08 1/2” PART NUMBER TUBE O.D.

DQ64DOT06 3/8”

PART NUMBER TUBE O.D. THREADDQ69DOTS0402 1/4” 1/8”DQ69DOTS0404 1/4” 1/4”DQ69DOTS0406 1/4” 3/8”DQ69DOTS0602 3/8” 1/8”DQ69DOTS0604 3/8” 1/4”DQ69DOTS0606 3/8” 3/8”DQ69DOTS0608 3/8” 1/2”DQ69DOTS0804 1/2” 1/4”DQ69DOTS0806 1/2” 3/8”DQ69DOTS0808 1/2” 1/2”DQ69DOTS1008 5/8” 1/2”

PART NUMBER TUBE O.D. THREADDQ68DOT0402 1/4” 1/8”DQ68DOT0404 1/4” 1/4”DQ68DOT0604 3/8” 1/4”DQ68DOT0606 3/8” 3/8”DQ68DOT0608 3/8” 1/2”DQ68DOT0804 1/2” 1/4”DQ68DOT0806 1/2” 3/8”DQ68DOT0808 1/2” 1/2”DQ68DOT1006 5/8” 3/8”DQ68DOT1008 5/8” 1/2”

099-F-03



Many other sizes available!

We have the best prices

available for OEM and

large volume orders

Brass



Central Hydraulics Inc.Specializing in OEM sales


1-800-264-9571

072-F-01

MONARCH 6101 6104-XP 7050 7059CCW, TANG 6102 6119 7057 7068Heavy Duty 6104 7057-A 7027 4005SERIES 6001 6001-S 4001 4001-AMDY,MHA,MHN 7003 7005-S 7004 6106MMY,MUE 7005 7003-S 7006

Our Part #D-4000HD

MONARCH 8111 8111-A 8110 8112CCW, TANG * 8111-DHeavy Duty *Use for motors with metal shield. Hot post

location in different position.

FENNER (SPX) 6116-S 7032 A 7039 7061CW, TANG 7022 7032 B 7039-S 7063Heavy Duty 7031 7037 7042 7066SERIES 7032 7037-S 7042-A 7066-SMDY,MFX,MMY 4002 4001-S 4001

Our Part #D-4100HD

Our Part #D-5000HD

FENNER (SPX) 1175-AC 1197-AC 1787-ACCW, 9-SPLINE 1789-AC 1185-AC 1931-ACHeavy Duty 1785-AC

Our Part #D-6000HD

12V Heavy DutyLift Gate MotorsReplaces

085-F-01

Tie-Rod StyleClevis Mount



Tailgate Cylinders

3½” Air OperatedTie-rod style aluminum cylinder with 3/4” dia. stainless steel piston rod. One 3½” dia. cylinder, one integral rear clevis, two ½” clevis pins, one 5/8”-18 Thd. clevis with ½” pin and cotter.

Part No. DescriptionTGC32506V 6” Stroke Clevis Mount CylinderTGC32508V 8” Stroke Clevis Mount Cylinder

2½” Air OperatedTie-rod style aluminum cylinder with 5/8” dia. stainless steel piston rod. One 2½” dia. cylinder, one integral rear clevis, two ½” clevis pins, one 5/8”-18 Thd. clevis with ½” pin and cotter.

Part No. DescriptionTGC25006V 6” Stroke Clevis Mount CylinderTGC25008V 8” Stroke Clevis Mount Cylinder

Product

Made in U.S.A.

New

1”,1¼”,1½” Diesel fuel oil hose with custom lengths made.

¾” or 1” custom length curb pump hoses

15940410GPM

Unleaded

2273DisposableBreakaway

3360Reusable

Breakaway

03503/4” Z Swivel



1-800-264-9571



065-F-01

3/4”AutomaticShut-off

1”AutomaticShut-off

1.5”AutomaticShut-off

169010100GPM100psi

33700418GPMFor 12V pumps

045704Unleaded15GPM045710Diesel

00871” Z Swivel

17331075GPMDiesel45psi

2276Reusable

Breakaway

1¼” & 1½” In-line

swivels



1-800-264-9571



052-F-01

●12 Volt DC●Rotary Vane Pump●

●Part # FR1210C● ¼ H.P. 20 amp motor● U/L listed● Cast iron pump housing● 1” inlet 3/4” outlet with a 2” tank adapter●

●Included In Box:● Pump● Owners manual● Pipe fitting● Teflon tape● Steel telescoping suction tube● 3/4” Manual nozzle● 18' power cable● 3/4” X 12' static guard hose●

●Typical●Applications:● Diesel fuel● Gasoline● Kerosene● Mineral spirits● Stoddard solvent● Heptane

15GPM

FR901

OptionalAccessories:

FR807C

3/4” Automatic Shut off nozzle

337004

3/4” Z Swivel 0350

Filter Head CIM 50003

Filter Element CIM 70002

FR901



1-800-264-9571



053-F-01

●12 Volt DC●Rotary Vane Pump●

●Part # FR4210● ¼ H.P. 22 amp motor● U/L listed● Cast iron pump housing● 1” inlet 1” outlet with a 2” tank adapter●

●Included In Box:● Pump● Owners manual● Pipe fitting● Teflon tape● Steel telescoping suction tube● 1” Manual nozzle● 18' power cable● 1” X 12' static guard hose●


20GPM

FR807C

1” Automatic Shut off nozzle

045704

1” Z Swivel 0087






1-800-264-9571



054-F-01

●115 Volt AC High Flow●Rotary Vane Pump●

●Part # FR700● 1/3 H.P.● U/L listed● Cast iron pump housing● 1” inlet 3/4” outlet with a 2” tank adapter●

●Included In Box:● Pump● Owners manual● 2” Tank Adapter● Teflon tape● 3/4” Manual nozzle● 3/4” 12' static guard hose●


20GPM

FR901


FR807C

3/4” Automatic Shut off nozzle

337004

3/4” Z Swivel 0350



Suction TubeALE 338370-2



1-800-264-9571



055-F-01

●Piston Hand Pump●20 Gallons per 100 strokes●

● Part # FR152● U/L listed● Aluminum body with stainless steel liner● 1” inlet 3/4” outlet with a 2” tank adapter●

●Included In Box:● Pump● Owners manual● 2” Tank Adapter● Teflon tape● Telescoping suction tube● 3/4” nozzle● 3/4” 8' static guard hose●

●Typical●Applications:● Diesel fuel● Gasoline● Kerosene● Light oils● Most non-corrosive● petroleum based fluids


3/4” Z Swivel 0350

Filter Element With Drain For Gasoline and Diesel FuelNAS NS10



1-800-264-9571



056-F-01

●Rotary Hand Pump●10 Gallons per 100 revolutions●

● Part # FR112● U/L listed● Aluminum body with cast iron rotor● 1” inlet 3/4” outlet with a 2” tank adapter●

●Included In Box:● Pump● Owners manual● 2” Tank Adapter● Teflon tape● 3/4” nozzle● 3/4” 8' static guard hose● Telescoping suction tube● Pipe fittings● Water Deflector●

●Typical●Applications:● Diesel fuel● Gasoline● Motor oils● Most non-corrosive● petroleum based fluids● Hydraulic oils● Lube oils● Light oils


3/4” Z Swivel 0350

Filter Element With Drain For Gasoline and Diesel FuelNAS NS10





1-800-264-9571

Accessories:55 Gallon Drum Adapter DTBUSHINGAir Regulator 109075Telescoping Suction Tube 100KTG8127

1:1 Air Powered Double Diaphragm Pumps

3/8” 7 GPM Free Flow RateAcetal Plastic Housing / Hytrel DiaphragmPart# D31255

3/4” 16 GPM Free Flow RateAluminum Housing / Buna N DiaphragmPart # 241906

1” 40 GPM Free Flow RateAluminum Housing / Hytrel DiaphragmPart # D73525

1” 40 GPM Free Flow RateAluminum Housing / Hytrel DiaphragmPart # 236265

1.5” 90 GPM Free Flow RateAluminum Housing / Hytrel DiaphragmPart # DB3525

●Applications:●Oil Transfer●Water / Anti-freeze●Windshield Washer Fluid

●Applications:●Oil Transfer●Oil Evacuation●Water / Anti-freeze●Windshield Washer Fluid

●Applications:●Oil Transfer●Oil Evacuation●Water / Anti-freeze

●Applications: (UL Listed)●Diesel Fuel Transfer●Oil Evacuation●Water / Anti-freeze

●Applications:●Oil Transfer●Oil Evacuation●Water / Anti-freeze

036-F-01

Oil Pump Specifications

Grease Pump Specifications

049-F-01

Central Hydraulics Inc. 800-264-9571 DAYTONA BEACH COCOA LEESBURG OCALA 386-253-2568 321-639-9967 352-323-8008 352-840-0842


●Pump for Oil / ATF / Gear Lube 5:1 55gal or 275gal Bung Mounted●Air operated from 40 to 180 psi●

●Perfect for high pressure fluid oil transfer in medium volume applications!

● This pump has been the 'crown jewel' of Graco since the 1950's and is the pump of choice in the most demanding environments.

●Features and Benefits● Corrosion-resistant design utilizes liquid salt nitriding, nickel

plating, stainless steel, aluminum and chrome on key components for longer life

● Few moving parts in the air motor assembly means less downtime and low repair cost

● Displacement rods have minimal wear due to a proprietary Graco manufacturing process

● Large air porting design provides efficient use of compressed air supply for continuous pump operation without icing

● Thick cast aluminum air motor housing offers unmatched durability

●Key Applications●Fluid oil transfer to●multiple metered●dispense points●

●Key Materials●Motor oil●Synthetic oil●Hydraulic oil●Gear oil●ATF

Recommended For● Service Shops●Construction Equip. Maintenance●Service Shops●Fast Lubes●Fleet

Non Metered Valves

Metered Valves

Digital238461

Hose Reelswith 1/2”x50ft Fluid

Hose Assy.



* included in package

Mechanical3685-F

222413ATF8078-D

130-050Gear Oil

130-051Gear Oil

130-052Oils,ATF,&Anti-freeze


045-F-01

●Stub pump for bulk oil●5:1 Air operated from 40 to 180 psi●

●Perfect for high pressure fluid oil transfer in medium volume applications!

● This pump has been the 'crown jewel' of Graco since the 1950's and is the pump of choice in the most demanding environments.

●Features and Benefits● Corrosion-resistant design utilizes liquid salt nitriding, nickel

plating, stainless steel, aluminum and chrome on key components for longer life





●Key Applications●Fluid oil transfer to●multiple metered●dispense points●

●Key Materials●Motor oil●Synthetic oil●Hydraulic oil●Gear oil●ATF

Recommended For● Service Shops●Construction Equip. Maintenance●Service Shops●Fast Lubes●Fleet

Non Metered Valves

Metered Valves

Digital238461

Hose Reelswith 1/2”x50ft Fluid

Hose Assy.



Mechanical3685-F

222413ATF

130-050Gear Oil

130-051Gear Oil



Stub Pump203876 Fire-Ball 300, 5:1 pump universal

Optional Accessories109075 3/8” Air regulator/gauge222308 2” bung adapter

Suction adaptersSVF HB150X100 1-1/2” to 1” BushingLIN DTBUSHING Tank bushing for telescoping tubeTUT 100KTG-8127 Telescoping suction tube

8078-D

044-F-01

●Key Applications●High-pressure grease dispense

●Key Materials●NLGI #00 Grease ●NLGI #0 Grease ●NLGI #1 Grease ●NLGI #2 Grease

Recommended For● Service Shops●Construction Equip. Maintenance●Service Shops●Automotive Dealerships●Fast Lubes●Fleet

* included in package

Container Size 35 lbPackage No. 222069*Pump No. 239877*Dispense Kits 222070* Fluid Hose 12 ft x 1/4 in* Control Handle 242056* Z Swivel 202577*Follower Plate 220653*Cover 222059*

Optional AccessoriesAir regulator w/gauge 109075Flex Hose for gun 5812Hose Reel 8078-B

Hose Reelswith 1/4”x50ft Grease

Hose Assy.

8078-B

Regulator & Guage109075

046-F-03Central Hydraulics Inc. 800-264-9571 DAYTONA BEACH COCOA LEESBURG OCALA 386-253-2568 321-639-9967 352-323-8008 352-840-0842


●Pump for Grease●50:1 For 5 Gallon (35lb) Containers●Air operated from 30 to 140 psi

●Perfect for high pressure grease dispense!● Graco’s Fire-Ball pumps are built to last. For almost 50 years the Fire-

Ball 300, 50:1 ratio has been a mainstay in the lubrication marketplace for its durability and long life. A package including a trusty Fire-Ball is sure to last!

●Features and Benefits● Corrosion-resistant design utilizes liquid salt nitriding, nickel plating,

stainless steel, aluminum and chrome on key components for longer life





●Key Applications●High-pressure grease dispense●


Recommended For● Service Shops●Construction Equip. Maintenance●Service Shops●Automotive Dealerships●Fast Lubes●Fleet●


Hose Assy.8078-B

●Pump for Grease●50:1 For 120lb Containers●Air operated from 30 to 140 psi●



●






● Thick cast aluminum air motor housing offers unmatched durability ●

`* included in package

Container Size 120 lbPackage No. 225014*Pump No. 239887*Dispense Kits 222072* Fluid Hose 6 ft x 1/4 in* Air Hose 6 ft x 3/8 in*Follower Plate 220654*Cover 204574*

Optional AccessoriesAir regulator w/gauge 109075Flex Hose for gun 5812Control Handle 242056Z Swivel 202577Hose Reel 8078-B

Z Swivel202577


Pro Shot Grease Gun242056



●Key Applications●High-pressure grease dispense●


Recommended For● Service Shops●Construction Equip. Maintenance●Service Shops●Automotive Dealerships●Fast Lubes●Fleet●

`* included in package

Container Size 400 lbPackage No. 225016*Pump No. 239888*Dispense Kits 222072* Fluid Hose 6 ft x 1/4 in* Air Hose 6 ft x 3/8 in*Follower Plate 223845*Cover 200326*

Optional AccessoriesAir regulator w/gauge 109075Flex Hose for gun 5812Control Handle 242056Z Swivel 202577Hose Reel 8078-B


Hose Assy.8078-B

Pro Shot Grease Gun242056

Z Swivel202577




●Pump for Grease●50:1 For 400lb Containers●Air operated from 30 to 140 psi●



●






● Thick cast aluminum air motor housing offers unmatched durability ●

Central Hydraulics Inc.1-800-264-9571


www.CentralHydraulics.com 014-S-03



1-800-264-9571



058-F-01

●14.4V Cordless Grease Gun

Part # 585-B● 10 Cartridges of Grease per battery charge ● 10,000 psi● Chrome Plated Barrel● 3' Ultra-Flexible Hose with Grease Coupler● Air Bleed Valve● High Flow Check Valve● Cartridge, or Bulk Loading●

●Included In Box:● Cordless Grease Gun● 2 High Capacity NiCd Batteries● Grease Cartridge Holder● One Hour Fast Charger


14 oz. Grease CartridgeROZ GATOR


091-F-01

Oil Reel # 8078-DWith Hose Type:● 1/2”X 50' (1,500psi)●Grease Reel # 8078-BWith Hose Type:● 1/4”X 50' (5,000psi)●Air\Water Reel # 8078-FWith Hose Type:● 3/8”X 50' (200psi)●Air\Water Reel # 8078-MWith Hose Type:● 1/2”X 50' (200 psi)



Hoses

Included!

Alemite HeavyDuty Reels

Central Hydraulics Inc.PVC Lay-flat discharge hose assemblies

109-F-01



SIZE AND LENGTH ASSY PRESSURE RATING PART NUMBER1-½” x 50 FT 60 PSI 1.5X50BLUE

2”x 50 FT 60 PSI 2X50BLUE3”x 50 FT 60 PSI 3X50BLUE4”x 50 FT 60 PSI 4”X50BLUE6”x 50 FT 60 PSI 6X50BLUE

SIZE AND LENGTH ASSY PRESSURE RATING PART NUMBER1-½” x 50 FT 150 PSI 1.5X50RED

2” x 50 ft 150 PSI 2X50RED3” x 50 FT 150 PSI 3X50RED4”x 50 FT 125 PSI 4X50RED6”x 50 FT 115 PSI 6X50RED

Assembled with Male by Female Cam-locks

Green PVCSuction Hose

PART NUMBER HOSE SIZEPAC 113-075 3/4”PAC113-100 1”PAC113-125 1-1/4”PAC 113-150 1-1/2”PAC 113-200 2”PAC 113-250 2-1/2”PAC 113-300 3”PAC 113-400 4”PAC 113-600 6”PAC 113-800 8”

Red

Blue



1-800-264-9571

110-F-01

Size Part #A

1/2” CCC A050-A3/4” CCC A075-A1” CCC A100-A

1 1/4” CCC A125-A1 1/2” CCC A150-A

2” CCC A200-A2 1/2” CCC A250-A

3” CCC A300-A4” CCC A400-A5” CCC A500-A6” CCC A600-A8” CCC A800-A

Size Part #B

1/2” CCC B050-A3/4” CCC B075-A1” CCC B100-A

1 1/4” CCC B125-A1 1/2” CCC B150-A

2” CCC B200-A2 1/2” CCC B250-A

3” CCC B300-A4” CCC B400-A5” CCC B500-A6” CCC B600-A8” CCC B800-A

Size Part #C

1/2” CCC C050-A3/4” CCC C075-A1” CCC C100-A

1 1/4” CCC C125-A1 1/2” CCC C150-A

2” CCC C200-A2 1/2” CCC C250-A

3” CCC C300-A4” CCC C400-A5” CCC C500-A6” CCC C600-A8” CCC C800-A

Size Part #D

1/2” CCC D050-A3/4” CCC D075-A1” CCC D100-A

1 1/4” CCC D125-A1 1/2” CCC D150-A

2” CCC D200-A2 1/2” CCC D250-A

3” CCC D300-A4” CCC D400-A5” CCC D500-A6” CCC D600-A8” CCC D800-A

Size Part #E

1/2” CCC E050-A3/4” CCC E075-A1” CCC E100-A

1 1/4” CCC E125-A1 1/2” CCC E150-A

2” CCC E200-A2 1/2” CCC E250-A

3” CCC E300-A4” CCC E400-A5” CCC E500-A6” CCC E600-A8” CCC E800-A

Size Part #F

1/2” CCC F050-A3/4” CCC F075-A1” CCC F100-A

1 1/4” CCC F125-A1 1/2” CCC F150-A

2” CCC F200-A2 1/2” CCC F250-A

3” CCC F300-A4” CCC F400-A5” CCC F500-A6” CCC F600-A8” CCC F800-A

Size Part #V

1/2” CCC V050-A3/4” CCC V075-A1” CCC V100-A

1 1/4” CCC V125-A1 1/2” CCC V150-A

2” CCC V200-A2 1/2” CCC V250-A

3” CCC V300-A4” CCC V400-A5” CCC V500-A6” CCC V600-A8” CCC V800-A

Size Part #W

1/2” CCC W050-A3/4” CCC W075-A1” CCC W100-A

1 1/4” CCC W125-A1 1/2” CCC W150-A

2” CCC W200-A2 1/2” CCC W250-A

3” CCC W300-A4” CCC W400-A5” CCC W500-A6” CCC W600-A8” CCC W800-A



KING NIPPLESize Part #NPT1/2” ST13/4” ST51” ST10

1 1/4” ST151 1/2” ST20

2” ST252 1/2” ST30

3” ST354” ST406” ST608” ST80

Size Part #NPT

1 1/2” RHS1502” RHS200

2 1/2” RHS2503” RHS3004” RHS4006” RHS600

Size Part #NPSH1 1/4” S151 1/2” S20

2” S252 1/2” S30

3” S364” S40

Size Part #STEEL

NST1 1/2” S2012 1/2” S301

Size Part #NPSH1 1/4” S171 1/2” S22

2” S272 1/2” S32

3” S384” S42

Size Part #NST

1 1/2” S22N2 1/2” S32N

SUCTION STRAINER

PLATED IRON MALE PIN LUG

PLATED IRON FEMALE PIN LUG

STEEL WITH IRON NUT



1-800-264-9571

111-F-01



CoupledMill Discharge Hose

PART NUMBER HOSE SIZE AND ENDSSNA MD15X50-NPSH 1.5” X 50' NPSHSNA MD15X50-NST 1.5” X 50' NSTSNA MD15X100-NPSH 1.5” X 100' NPSHSNA MD15X100-NST 1.5” X 100' NSTSNA MD20X50-NPSH 2” X 50 NPSHSNA MD20X100-NPSH 2” X 100 NPSH

SIZE PART NUMBER1-1/2” NST JSI FN150BNST1-1/2” NPSH JSI FN150B2-1/2” NST JSI FN250B

SIZE PART NUMBER1-1/2” NST JSI FN150NST1-1/2” NPSH JSI FN1502” NPSH DIX CFB20155

Fog Nozzles

BulkMill Discharge Hose

PART NUMBER HOSE SIZESNA MD15X50W 1.5” X 50'SNA MD15X100W 1.5” X 100'SNA MD20X50W 2” X 50'SNA MD20X100W 2” X 100'SNA MD25X50W 2.5” X 50'SNA MD25X100W 2.5” X 100'SNA MD30X50W 3” X 50'SNA MD30X100W 3” X 100'

Brass Plastic

125psi

125psi



1-800-264-9571

113-F-01



Control Cables

PART NUMBER LENGTH5203BBU036 36”5203BBU048 48”5203BBU060 60”5203BBU072 72”5203BBU084 84” 5203BBU096 96” 5203BBU108 108” 5203BBU120 120” 5203BBU144 144”

BBU SERIES(BULKHEAD TO BULKHEAD)

INCLUDES NUTS AND WASHERS

5200 Series1/4”-28 Thread S.S. Rod3” Travel 8” Bend Radius.125 Core40-100LB Load Range

PART NUMBER LENGTH6203BBU048 48”6203BBU060 60”6203BBU072 72”6203BBU084 84”6203BBU096 96”6203BBU108 108”6203BBU120 120”

6200 Series5/16”-24 Thread S.S. Rod3” Travel 10” Bend Radius.188 Core110-200LB Load Range

Many other sizes available




Twin Clamps

PART NUMBER I.D. OF CLAMPS-1004S 0.250S-1006S 0.375S-1007S 0.405S-2008S 0.500S-2009S 0.540S-2010S 0.625S-2011S 0.675S-3012S 0.750S-3014S 0.840S-3015S 0.875S-3016S 1.000S-4017S 1.050S-4018S 1.125S-5020S 1.250S-5021S 1.315S-5024S 1.500S-5027S 1.660S-6028S 1.750S-6030S 1.900S-6032S 2.000S-7038S 2.375

Single Clamps Measure the O.D of yourhose, tube, or pipe to figureout which clamp you need.Bottom plate welds in place

PART NUMBER I.D. OF CLAMPT-1004S 0.250T-1006S 0.375T-1007S 0.405T-2008S 0.500T-2009S 0.540T-2010S 0.625T-2011S 0.675T-3012S 0.750T-3014S 0.840T-3015S 0.875T-3016S 1.000T-4017S 1.050T-4018S 1.125T-5020S 1.250T-5021S 1.315T-5024S 1.500T-5027S 1.660


128-F-01

131-F-01



Pump/valve assembly for heavy and medium duty dump trucks and dump

trailers

Central Hydraulics Series IN³DM-640-25/DMD-25 6.40 21.0 29.0 37.5

GPM/900 RPM/ 2000 PSI



Permco Dump Pump Features ý Direct mount SAE "B" 4 bolt or twin shafted remote mount with bracket (DM-640) or built-in mounting bracket (DMR-400) ý Manual shift, "OEM" air shift (DM-640 and DMD-25 only), or after market air shift, each with full metering capabilities ý 100% factory tested ý Heavy duty "controlled stress" roller bearings ý Pump and cylinder protected in the raise and neutral position of the spool ý 2 extended studs for easy installation of pump support bracket on direct mount (DMD-25 only) ý Built-in load check maintains dump body angle and is installed in the cylinder port for superior self-cleaning ý Built-in direct acting relief valve set at factory ý Neutral lock-out safety cap for use with pull-out cable ý High strength alloy steel gear and shaft set ý

IN³DMR/DMD-300 3.00 10.0 14.0 17.5DMR/DMD-400 4.00 13.5 19.0 24.0

Central HydraulicsSeries




DM-640(C101)

DMD-25(C102)

AccessoriesControlConsoleDCC1229

H 10"L 6 3/8"W 3 1/2"

The PRM P1229 air valvecontrols both the DumpPump and the PTO inone lever. Thereare options fordetent of thelever controllingthe pump anda PTO kick-out.

The APS C-3505-DM is an air shift cylinder that fits the DMD-25 and DM-640 Dump Pump as well as allother units of similar design.

Pump/valve assembly for medium and light duty

dump trucksDMD-400 DMR-400

Dump Pumps and Accessories

133-F-01



AUXILIARY PORT

WORK PORT B

AUXILIARY PORT A

SUPPLY

Move Lever to Raise

Hoist

Move Lever to Lower

Hoist

Pull Yellow Sleeve to

Disengage P.T.O.

Push Red Button and Pull Yellow

Sleeve to Engage P.T.O.

AIR SHIFT CYLINDER

HYDRAULIC DUMP PUMP

POWER TAKE-OFF

●Safety Lock for P.T.O.●Convenient Location

●Easy Installation

Central Hydraulics Inc.5-way, 3-position, Stackable Air Control Valve

The P1229 is a 5-way, 3-position, Stackable Air Control Valve with a push button auxiliary function capable of many applications including P.T.O./Hoist control. Movement of the handle in either direction allows controlled pressure output to work ports A or B respectively, in a proportional manner, allowing feathering.This Unique and Versatile controller is capable of: • P.T.O./Hoist Control. • Operation of two double acting functions with one controller. (e.g. side & rear tipping of truck dump bodies, snow plow wing blade & wing blade positioner. • Operation of plow blades, requiring power-up & power-down with float option on demand.

P1229AIR CONTROL

VALVE

CF Series1 ½ - 2 and 2 ½ Inch

Glycerin Filled• Stainless Steel Case & Bezel• Brass & Phosphor Bronze Bourdon Tube• Vacuum to 6,000 PSI Range• Dual Scale PSI & BAR• Accuracy ± 1.6% FSD• Temperature Range -40º to 180º F• Brass Connection

INSTALLATION DATA

*Note: 1½ inch available only as a center back mountport size - 1/8 npt. Limited to 5000 PSI.

Port Sizes for 2” and 2 1/2” are 1/4 nptSpecial sizes subject to minimum order qty.



112-F-02



Hydraulic Oil

PART NUMBER OIL TYPEOIL AW321 1 GAL 5 WT HYD OILOIL AW681 1 GAL 20 WT HYD OILOIL UTF-ULT1 1 GAL JD20 TRACTOR FLUIDOIL DEX1 1 GAL DEXTRON 3

PART NUMBER OIL TYPEOIL AW325 5 GAL 5 WT HYD OILOIL AW465 5 GAL 10 WT HYD OILOIL AW685 5 GAL 20 WT STANDARD HYD OILOIL AW1005 5 GAL 30WT HYD OILOIL UTF5 5 GAL UNIVERSAL TRACTOR FLUIDOIL UTF-ULT5 5 GAL JD20 TRACTOR FLUIDOIL DEX5 5 GAL DEXTRON 3OIL BIO5 5 GAL BIODEGRADABLE HYD OILOIL DTE13M5 5 GAL NON CONDUCTIVE AERIAL FLUID

PART NUMBER OIL TYPEOIL AW4655 55 GAL 10 WT HYD OILOIL AW6855 55 GAL 20 WT STANDARD HYD OILOIL UTF55 55 GAL UNIVERSAL TRACTOR FLUIDOIL BIO55 55 GAL BIODEGRADABLE HYD OIL

By the Gallon

5 Gallon Pail

55 Gallon Drum

Central Hydraulics Inc.Specializing in OEM sales and repairs


1-800-264-9571DAYTONA BEACH 386-253-2568 (Fax)386-257-5728COCOA 321-639-9967 (Fax)321-636-3156LEESBURG 352-323-8008 (Fax)352-323-8533OCALA 352-840-0842 (Fax)352-840-0858

www.CentralHydraulics.comOur catalog is a work in progress.

We are constantly updating it.Feel free to e-mail [email protected] with any

corrections or suggestions you may have. Thanks!

http://www.CentralHydraulics.com/

mailto:[email protected]

121 master catalog

Documents

Transcript of 121 master catalog