11341838 Car Rental System Documentation
-
Upload
reetee-rambojun -
Category
Documents
-
view
435 -
download
9
Transcript of 11341838 Car Rental System Documentation
ProjectIn
Database Management System
CAR RENTAL SYSTEM DOCUMENTATION
Submitted By:Cabunot, Joanna MarieLubrico, JanenMagallanes, Mary CrisNahudan, Eiman
Submitted To:Ms. Marinella T. Tose
Car Rental System Analysis
A Car company rents a car. Car (Plate_no, Car_Name,
Color, Speed, and rental) is identified by its Car_Id rents by a
customer. Customer (Lastname, Firstname, Birthdate,
Telephone_no, Cellphone_no and Address) is identified by a
Cus_Id processed the transaction by the employee. Employee
(Lastname, Firstname, Address, Position, Telephone_no,
Cellphone_no and Birthdate) is identified by its Emp_Id.
Whenever a customer rents a car date_rented, amount,
deposit and the no_of_days are kept. In returning the car the
date_returned, date_rented and the who processed the
transaction are recorded.
OVERVIEW OF THE FUNCTIONALITIES
This System will facilitate the functioning of a "typical"
Rental Car store. Each type of car should have a different
rental fee per day. Rental fee depends on number of day, brand
and how fast the car runs.
The system should have the following functionalities:
Rent: The system equipped to answer Customer's inquiries
about the availability and rental fee of various "types" of cars
for certain dates in the
future. When the customer makes a decision about the "Type"
of car and the
Dates, the system should be able to "Reserve" or "Earmark"
the requested type of car for requested dates. The customer
should be given a "Confirmation Number".
Pick Up: The system process a Car Pick Up. Customer
walks
in and supplies either the confirmation number, or name. The
system should pull up all the reservation information about this
customer. The customer is then asked to supply a drivers’
license.
Return: The system process a return. The system should
record the date, time and processed by Depending on these
parameters, the system
calculate the final rental amount.
Name: Cabunot, Joana Marie Z.Address: San Roque, Z.CBirthday: November 5, 1989Work Assigned: System Analyst (is responsible for researching, planning, coordinating and recommending software and system choices to meet an organization's business requirements)Contribution: bond papers, folder, venue, food, and latop
Name: Lubrico, Janen A.Address: San Roque, Z.CBirthday: July 9, 1990Work Assigned: Programmer (who writes the code of this system.)Contribution: food, fare rate, and water
Name: Magallanes, Mary Cris G.Address: Baliwasan Z.CBirthday: December 25, 1990Work Assigned: Error Corrector and detector (has great practical importance in maintaining data (information) integrity across noisy channels and less-than-reliable storage media.)Contribution: food ,venue, and fare rate
Name: Nahudan, Eiman S.Address: San Roque, Z.CBirthday: March 18, 1989Work Assigned: System Designer (who designs the UI of the system.)Contribution: printing, free internet, food, and venue
CAR RENTAL SYSTEM ERD
N N
Cus _Id Deposit N Lastname N Date_rentedDate_rent Firstname Date_returnedNo_of_days Birthdate Processed_ByAmount Telephone_No Car_Id * Car_Id* Address Cus_Id* Cus_Id* N N
Car_Id Plate_no Car_name Brand Color Speed Rental
Car_Id* Emp_Id Emp_Id 1
Lastname Firstname
Address Position
RENTS RETURN
ISSUED BY
Birthdate Telephon
e_no Cellphone
_no
CAR RENTAL SYSTEM TABLEScartable
Car_Id Plate_no BrandColo
rSpeed Rental Status
1JKL 900 CRV RED 230 mph 200 12KLI 567 RANGER BLUE 300 mph 300 13AAZ 123 HONDA
CIVICGREY 300 mph 300 1
4ZXC 435 TOYOTA BLACK
250mph 500 1
5QQQ 123 adventure blue 550mph 1000 1
customertableCus_
IdLastna
meFirstna
meAddress Telephone_no
Cellphone_no
Birthdate
1Magallanes
Marycris caumpang 584641976 4545485 12/25/2008
2Bacus Ricky RQEREQR 56624 776 10/6/20083Columbr
esRheanette
XFGVSZDV 65378 5464563 9/30/2008
4De asis Shiella sdjfsadkjfsd 992 0918 10/6/20085Ablao Gian
CarloSDFASDFDS 9919191 0919 3/18/1989
6Gubantes
Ferr Jane
jdafsda 9912345 0905123456 9/29/2008
employeetableEmp_
IdLastname
Firstname
Address
Telephone_no
cellphone_no
Birthdate
Date_hired
MyPosition
1LUBRICO JANEN FDGHDF
756765765 5475456 10/14/2008
10/6/2008
Cashier
2TWIEUTIWRUT
TIRUTIR TWTWT
4545 4545 9/30/2008
12:00:00 AM
cashier
3DACAY SHEENAMAE
TABUK 993 90512345 10/6/2008
12:00:00 AM
manager
4PANDAY HAZEL CHCO 993 9076543221
10/22/2008
12:00:00 AM
cashier
renttable
Car_IdCus_
IdDate_Ren
tedNo_of_da
ysAmount Deposit Status
1 2 10/15/2008
2 1500 15002
returntableLastna
meFirstna
mePlate_
NoCarna
meDate_Rented Date_Returned Process_by
Magallanes
Marycris QQQ 123
CRV 10/05/2008 10/07/2008 Janen
CAR RENTAL SYSTEM USER INTERFACE
FORM USER AUTHENTICATION
FORM
CARRENTAL
If you click Customer Profile, Customer Table will appear.
If you click new command Customer Entity form will appear.
Whenever you did not fill up the required information, this dialog box will appear.
When a record is successfully saved, this dialog box will appear.
When you click Edit command , this form will appear.
When a record is successfully updated, this dialog box will appear.
When we click the Search command, this form will appear.
A message box will appear if you want to continue to delete a record.
When a record is successfully deleted, this dialog box will appear.
If you click Employee Profile, Employee Table will appear.
If you click new command Employee Entity form will appear.
Whenever you did not fill up the required information, this dialog box will appear.
When a record is successfully saved, this dialog box will appear.
When you click Edit command , this form will appear.
When a record is successfully updated, this dialog box will appear.
When we click the Search command, this form will appear.
A message box will appear if you want to continue to delete a record.
When a record is successfully deleted, this dialog box will appear.
This form will appear whenever there’s a transaction made or when you click the transaction menu bar.
Whenever there’s a new transaction’s made, this form will appear.
Whenever you did not fill up the required information, this dialog box will appear.
When you click the transaction details at the menu bar, this form will appear.
CAR RENTAL SYSTEM CODESFRMCARRENTAL
Private Sub car_rent_Click()frmrenttbl.ShowEnd SubPrivate Sub logoutsub_Click()Unload Mefrmlogin.ShowEnd Sub
Private Sub mnucustomerprofile_Click()frmcustbl.ShowEnd Sub
Private Sub mnuemployeeprofile_Click()frmemptbl.ShowEnd Sub
Private Sub mnusearch_Click()'frmsearch.ShowEnd Sub
Private Sub mnutransaction_Click()'frmrent.ShowEnd Sub
Private Sub quitsub_Click()EndEnd Sub
Private Sub retcars_Click()frmreturntbl.ShowEnd Sub
FRMCUSTBL
Private Sub Command1_Click()cust_opt = 1frmnewcust.Show (1)End Sub
Private Sub Command2_Click()Dim did
did = DataGrid1.Columns(0).TextIf Not did = "" Then custid = did cust_opt = 2 frmnewcust.cmd_save.Caption = "Update" frmnewcust.Show (1)End If
End Sub
Private Sub Command3_Click()Dim pr
Call connectmeconn.Open pr = InputBox("Please Enter Any Key to Search!" & Chr(10) & Chr(13) & "CUS ID/LASTNAME/FIRSTNAME", "Searching...")If pr = "" Then
ElseIf Val(pr) >= 1 Then query = "SELECT * FROM customertable WHERE Cus_Id=" & pr rs.Open query, conn Set DataGrid1.DataSource = rs
ElseIf pr = "All" Or pr = "all" Then query = "SELECT * FROM customertable ORDER BY Lastname" rs.Open query, conn Set DataGrid1.DataSource = rs
Else query = "SELECT * FROM customertable WHERE Lastname LIKE '" & pr & "%' or Firstname LIKE '" & pr & "%' ORDER BY Lastname" rs.Open query, conn Set DataGrid1.DataSource = rs
End If
End Sub
Private Sub Command4_Click()Dim confirmDim did
did = DataGrid1.Columns(0).Text
If Not did = "" Then confirm = MsgBox("This will delete the selected Record!..proceed anyway!", vbOKCancel + vbExclamation, "Warning!") If confirm = vbOK Then Call connectme conn.Open conn.Execute "DELETE FROM customertable WHERE Cus_Id=" & did MsgBox "The Record was successfully Deleted!", vbInformation conn.Close Call myquery End IfElse MsgBox "There are no records to delete!", vbCriticalEnd If
End Sub
Private Sub Command5_Click()Unload MeEnd Sub
Private Sub Form_Load()
Call myquery ''************ USER LEVEL
If userlevel = 3 Then Command1.Enabled = False Command2.Enabled = False Command4.Enabled = FalseElse Command1.Enabled = True Command2.Enabled = True Command4.Enabled = TrueEnd If End Sub
Public Sub myquery() Call connectme conn.Open query = "SELECT * FROM customertable ORDER BY Cus_Id desc" rs.Open query, conn Set DataGrid1.DataSource = rs If Not rs.EOF Then rs.MoveLast reccnt.Caption = rs.RecordCount Else reccnt.Caption = 0 End If Call datgrid DataGrid1.MarqueeStyle = 3End Sub
Public Sub datgrid() DataGrid1.Font.Size = 11 DataGrid1.Font.Name = "Arial" DataGrid1.HeadFont.Size = 11 DataGrid1.HeadFont.Bold = True DataGrid1.HeadFont.Name = "Arial"DataGrid1.Columns(0).Caption = "Cust ID"DataGrid1.Columns(0).Width = 1000DataGrid1.Columns(1).Width = 3200DataGrid1.Columns(2).Width = 3200DataGrid1.Columns(3).Caption = "Telephone No."DataGrid1.Columns(3).Width = 1700
DataGrid1.Columns(4).Caption = "CellPhone No."DataGrid1.Columns(4).Width = 1600
End Sub
FRM EMPTBL
Private Sub Command1_Click()emp_opt = 1frmnewemp.Show (1)End Sub
Private Sub Command2_Click()Dim did
did = DataGrid1.Columns(0).TextIf Not did = "" Then empid = did emp_opt = 2 frmnewemp.cmd_save.Caption = "Update" frmnewemp.Show (1)End If
End Sub
Private Sub Command3_Click()Dim pr
Call connectmeconn.Open pr = InputBox("Please Enter Any Key to Search!" & Chr(10) & Chr(13) & "EMP ID/LASTNAME/FIRSTNAME", "Searching...")If pr = "" Then
ElseIf Val(pr) >= 1 Then query = "SELECT * FROM employeetable WHERE Emp_Id=" & pr rs.Open query, conn Set DataGrid1.DataSource = rs
ElseIf pr = "All" Or pr = "all" Then query = "SELECT * FROM employeetable ORDER BY Lastname" rs.Open query, conn Set DataGrid1.DataSource = rs
Else query = "SELECT * FROM employeetable WHERE Lastname LIKE '" & pr & "%' or Firstname LIKE '" & pr & "%' ORDER BY Lastname" rs.Open query, conn Set DataGrid1.DataSource = rs
End If
End Sub
Private Sub Command4_Click()Dim confirmDim did
did = DataGrid1.Columns(0).Text
If Not did = "" Then confirm = MsgBox("This will delete the selected Record!..proceed anyway!", vbOKCancel + vbExclamation, "Warning!") If confirm = vbOK Then Call connectme conn.Open conn.Execute "DELETE FROM employeetable WHERE Emp_id=" & did MsgBox "The Record was successfully Deleted!", vbInformation conn.Close Call myquery End IfElse MsgBox "There are no records to delete!", vbCriticalEnd IfEnd Sub
Private Sub Command5_Click()Unload MeEnd Sub
Private Sub Form_Load()
Call myquery''************ USER LEVEL
If userlevel = 1 Then Command1.Enabled = True Command2.Enabled = True Command4.Enabled = True Else Command1.Enabled = False Command2.Enabled = False Command4.Enabled = FalseEnd If
End Sub
Public Sub myquery() Call connectme conn.Open query = "SELECT * FROM employeetable ORDER BY Emp_Id desc"
rs.Open query, conn Set DataGrid1.DataSource = rs If Not rs.EOF Then rs.MoveLast reccnt.Caption = rs.RecordCount Else reccnt.Caption = 0 End If Call datgrid DataGrid1.MarqueeStyle = 3
End SubPublic Sub datgrid() DataGrid1.Font.Size = 11 DataGrid1.Font.Name = "Arial" DataGrid1.HeadFont.Size = 11 DataGrid1.HeadFont.Bold = True DataGrid1.HeadFont.Name = "Arial"DataGrid1.Columns(0).Caption = "Emp ID"DataGrid1.Columns(0).Width = 1000DataGrid1.Columns(4).Caption = "Telephone No."DataGrid1.Columns(4).Width = 1700DataGrid1.Columns(5).Caption = "CellPhone No."DataGrid1.Columns(5).Width = 1600DataGrid1.Columns(7).Caption = "Date Hired"DataGrid1.Columns(7).Width = 1600
End Sub
FRMLOGIN
Private Sub Command1_Click()
Call connectme conn.Open ssql = "SELECT * FROM myusers WHERE myusername='" & txt_user.Text & "' AND mypassword='" & txt_pass.Text & "'"rs.Open ssql, conn If Not rs.EOF Then With rs userlevel = !user_level myuser = txt_user.Text frmcarrental.Enabled = True Unload Me End With Else
MsgBox "Invalid username and password !", vbCritical, "KRIN" txt_user.SetFocus frmcarrental.Enabled = False End If conn.Close End Sub
Private Sub Command2_Click()EndEnd Sub
Private Sub Form_Load()frmcarrental.ShowEnd Sub
FRMNEWCUST
Private Sub cmd_cancel_Click()Unload MeEnd SubPrivate Sub clearfields()txt_Lastname.Text = ""txt_Firstname.Text = ""txt_Address.Text = ""txt_tp.Text = ""txt_cp.Text = ""txt_Position.Text = ""dtdatehired.Value = NowEnd Sub
Private Sub cmd_save_Click()
If txt_Lastname.Text = "" Then MsgBox "Please enter Customer Name", vbQuestion, "KRIN" txt_Lastname.SetFocus
ElseIf txt_Address.Text = "" Then MsgBox "Please enter Address", vbQuestion, "KRIN" txt_Address.SetFocus
Else If cust_opt = 1 Then Call addrec MsgBox "Record was successfully saved!", vbInformation, "KRIN" Unload Me ElseIf cust_opt = 2 Then Call editrec MsgBox "Record was successfully updated!", vbInformation, "KRIN"
End If Call frmcustbl.myqueryEnd IfEnd Sub
Private Sub Form_Load()
Dim rs1 As ADODB.Recordset Dim rs2 As ADODB.Recordset Set rs1 = New ADODB.Recordset Set rs2 = New ADODB.Recordset Call connectme If cust_opt = 2 Then conn.Open ssqlsub = "SELECT * FROM customertable WHERE Cus_Id=" & custid rs2.Open ssqlsub, conn If Not rs2.EOF Then With rs2 txt_Lastname.Text = !lastname txt_Firstname.Text = !firstname dtbirthdate.Value = !Birthdate txt_tp.Text = !Telephone_no txt_cp.Text = !Cellphone_no txt_Address.Text = !Address End With End If conn.Close End If
End SubPublic Sub addrec()
'******** save recordCall connectmeconn.Openconn.Execute "INSERT INTO customertable(Lastname,Birthdate,Telephone_no,Cellphone_no,Address) VALUES('" & txt_Lastname & "','" & txt_Firstname & "','" & dtbirthdate.Value & "','" & txt_tp.Text & "','" & txt_cp.Text & "','" & txt_Address.Text & "')" End SubPublic Sub editrec()
'******** update recordCall connectme conn.Open
conn.Execute "UPDATE customertable set Firstname='" & txt_Firstname.Text & "', Lastname='" & txt_Lastname.Text & "',Birthdate='" & dtbirthdate.Value & "',Telephone_no='" & txt_tp.Text & "', Cellphone_no='" & txt_cp.Text & "', Address='" & txt_Address & "' WHERE Cus_Id=" & custid End Sub
FRMNEWEMP
Private Sub cmd_cancel_Click()Unload MeEnd SubPrivate Sub clearfields()txt_Lastname.Text = ""txt_Firstname.Text = ""txt_Address.Text = ""txt_tp.Text = ""txt_cp.Text = ""txt_Position.Text = ""dtdatehired.Value = NowEnd Sub
Private Sub cmd_save_Click()
If txt_Lastname.Text = "" Then MsgBox "Please enter Lastname", vbQuestion, "KRIN" txt_Lastname.SetFocusElseIf txt_Firstname.Text = "" Then MsgBox "Please enter Firstname", vbQuestion, "KRIN" txt_Firstname.SetFocus
ElseIf txt_Address.Text = "" Then MsgBox "Please enter Address", vbQuestion, "KRIN" txt_Address.SetFocus
Else If emp_opt = 1 Then Call addrec MsgBox "Record was successfully saved!", vbInformation, "KRIN" Unload Me ElseIf emp_opt = 2 Then Call editrec MsgBox "Record was successfully updated!", vbInformation, "KRIN" End If Call frmemptbl.myqueryEnd IfEnd Sub
Private Sub Form_Load()
Dim rs1 As ADODB.Recordset Dim rs2 As ADODB.Recordset Set rs1 = New ADODB.Recordset Set rs2 = New ADODB.Recordset Call connectme If emp_opt = 2 Then conn.Open ssqlsub = "SELECT * FROM employeetable WHERE Emp_Id=" & empid rs2.Open ssqlsub, conn If Not rs2.EOF Then With rs2 txt_Lastname.Text = !lastname txt_Firstname.Text = !firstname txt_Position.Text = !MyPosition dtbirthdate.Value = !Birthdate dtdatehired.Value = !Date_hired txt_tp.Text = !Telephone_no txt_cp.Text = !Cellphone_no txt_Address.Text = !Address End With End If conn.Close End If
End SubPublic Sub addrec()
'******** save recordCall connectmeconn.Openconn.Execute "INSERT INTO employeetable(Lastname,Firstname,MyPosition,Birthdate,Date_hired,Telephone_no,Cellphone_no,Address) VALUES('" & txt_Lastname & "','" & txt_Firstname & "', '" & txt_Position.Text & "', '" & dtbirthdate.Value & "','" & dtdatehired.Value & "','" & txt_tp.Text & "','" & txt_cp.Text & "','" & txt_Address.Text & "')" End SubPublic Sub editrec()
'******** update recordCall connectme conn.Open conn.Execute "UPDATE employeetable set Firstname='" & txt_Firstname.Text & "', Lastname='" & txt_Lastname.Text & "',Birthdate='" & dtbirthdate.Value & "',Date_hired='" & dtdatehired.Value & "',Telephone_no='" & txt_tp.Text & "', Cellphone_no='" & txt_cp.Text &
"', Address='" & txt_Address & "', MyPosition='" & txt_Position.Text & "' WHERE Emp_Id=" & empid End Sub
FRMNEWRENT
Private Sub cmd_cancel_Click()Unload MeEnd SubPrivate Sub clearfields()txt_Lastname.Text = ""txt_Firstname.Text = ""txt_Address.Text = ""txt_tp.Text = ""txt_cp.Text = ""txt_Position.Text = ""dtdatehired.Value = NowEnd Sub
Private Sub cmd_save_Click()
If txt_custid.Text = "" Then MsgBox "Please enter Custmer Information", vbQuestion, "KRIN" customer.SetFocusElseIf txt_carid.Text = "" Then MsgBox "Please enter Car Information", vbQuestion, "KRIN" txt_plateno.SetFocusElseIf txt_days.Text = "" Then MsgBox "Please enter No. of days!", vbQuestion, "KRIN" txt_days.SetFocusElseIf txt_deposit.Text = "" Then MsgBox "Please enter Amount Deposit/Paid!", vbQuestion, "KRIN" txt_deposit.SetFocus
Else If rent_opt = 1 Then Call addrec MsgBox "Record was successfully saved!", vbInformation, "KRIN" Unload Me ElseIf rent_opt = 2 Then Call editrec MsgBox "Record was successfully updated!", vbInformation, "KRIN" End If Call frmrenttbl.myqueryEnd IfEnd Sub
Private Sub customer_KeyPress(KeyAscii As Integer)If KeyAscii = 13 Then If Not customer.Text = "" Then
ssqlsub = "SELECT * FROM customertable WHERE Customer_Name='" & Trim(customer.Text) & "'" rs.Open ssqlsub, conn If Not rs.EOF Then With rs txt_custid.Text = !Cus_Id txt_cp.Text = !Cellphone_no txt_tp.Text = !Telephone_no txt_Address.Text = !Address End With End If rs.CloseEnd If
End IfEnd Sub
Private Sub Form_Load() Dim cus, car
Dim rs1 As ADODB.Recordset Dim rs2 As ADODB.Recordset Dim rs3 As ADODB.Recordset Set rs1 = New ADODB.Recordset Set rs2 = New ADODB.Recordset Set rs3 = New ADODB.Recordset Call connectme conn.Open
If rent_opt = 2 Then ssqlsub = " SELECT * FROM renttable WHERE Rent_Id=" & rentid rs2.Open ssqlsub, conn If Not rs2.EOF Then With rs2 cus = !Cus_Id car = !Car_Id ssqlcus = "SELECT * FROM customertable WHERE Cus_Id=" & cus rs.Open ssqlcus, conn With rs txt_custid.Text = cus lastname.Text = !lastname txt_cp.Text = !Cellphone_no txt_tp.Text = !Telephone_no txt_Address.Text = !Address End With ssqlcar = "SELECT * FROM cartable WHERE Car_Id=" & car rs3.Open ssqlcar, conn With rs3 txt_carid = car txt_plateno.Text = !Plate_no
txt_carname.Text = !Brand txt_color.Text = !Color txt_rental.Text = !Rental End With txt_days.Text = !No_of_days txt_due.Text = !Amount txt_deposit.Text = !Deposit End With End If End If ssql2 = "SELECT lastname FROM customertable" rs1.Open ssql2, conn Set customer.RowSource = rs1 customer.ListField = rs1.Fields("lastname").Name End SubPublic Sub addrec()
'******** save recordCall connectmeconn.Openconn.Execute "INSERT INTO renttable(Cus_Id,Car_Id,Date_Rented,No_of_days,Amount,Deposit,Status) VALUES('" & txt_custid & "','" & txt_carid & "', '" & daterent.Value & "', '" & txt_days.Text & "','" & txt_due.Text & "','" & txt_deposit.Text & "','1')"conn.Execute "Update cartable set Status='2' WHERE Car_Id=" & txt_carid End SubPublic Sub editrec()
'******** update recordCall connectme conn.Open conn.Execute "UPDATE renttable set Cus_Id='" & txt_custid.Text & "', Car_id='" & txt_carid.Text & "',No_of_days='" & txt_days.Text & "', Amount='" & txt_due.Text & "',Deposit='" & txt_deposit.Text & "', Date_Rented='" & daterent.Value & "' WHERE Rent_Id=" & rentid End SubPrivate Sub txt_days_Change()If Not txt_days.Text = "" Then txt_due.Text = Val(txt_rental.Text) * Val(txt_days.Text) txt_due.Text = Format(txt_due.Text, "#########.00")End IfEnd Sub
Private Sub txt_plateno_KeyPress(KeyAscii As Integer)If KeyAscii = 13 Then If Not txt_plateno.Text = "" Then
ssqlsub = "SELECT * FROM cartable WHERE Plate_no='" & Trim(txt_plateno.Text) & "' AND Status='1'" rs.Open ssqlsub, conn If Not rs.EOF Then With rs txt_carid.Text = !Car_Id txt_carname.Text = !Brand txt_color.Text = !Color txt_rental.Text = !Rental End With Else MsgBox "The Car is not Available at the moment!", vbCritical Call clearme End If rs.Close End If
End IfEnd SubPublic Sub clearme() txt_carid.Text = "" txt_carname.Text = "" txt_color.Text = "" txt_rental.Text = ""End Sub
FRMRENTBL
Private Sub Command6_Click()frmlistcar.ShowEnd SubPrivate Sub Command1_Click()rent_opt = 2frmnewrent.Show (1)End Sub
Private Sub Command2_Click()Dim did
did = DataGrid1.Columns(0).TextIf Not did = "" Then rentid = did rent_opt = 1 frmnewrent.cmd_save.Caption = "Update" frmnewrent.Show (1)End If
End Sub
Private Sub Command3_Click()Dim pr
Call connectme
conn.Open pr = InputBox("Please Enter Any Key to Search!" & Chr(10) & Chr(13) & "PLATE NO./CUSTOMER ", "Searching...")If pr = "" Then
ElseIf pr = "All" Or pr = "all" Then Call myqueryElse rs.Open query, conn Set DataGrid1.DataSource = rs Call datgridEnd If
End Sub
Private Sub Command4_Click()Dim confirmDim did
did = DataGrid1.Columns(0).Textlastname = DataGrid1.Columns(1).Textfirstname = DataGrid1.Columns(2).Textplateno = DataGrid1.Columns(3).Textcarname = DataGrid1.Columns(4).Textdaterent = DataGrid1.Columns(5).Textdateret = Format(Now, "mm/dd/yyyy")If Not did = "" Then confirm = MsgBox("This will RETURN the Car Now?..proceed anyway!", vbOKCancel + vbExclamation, "Warning!") If confirm = vbOK Then Call connectme conn.Open conn.Execute "Update cartable set Status='1' WHERE Plate_no='" & plateno & "'" conn.Execute "Update renttable set Status='2' WHERE Rent_Id=" & did conn.Execute "Insert into returntable(Rent_Id,lastname,firstname,Plate_No,Carname,Date_Rented,Date_Returned,Process_by) VALUES ('" & did & "','" & lastname & "','" & firstname & "','" & plateno & "','" & carname & "','" & daterent & "','" & dateret & "','" & myuser & "')" MsgBox "The Return Transaction was successfully saved!", vbInformation conn.Close Call myquery End IfElse MsgBox "There are no records to delete!", vbCriticalEnd IfEnd Sub
Private Sub Command5_Click()Unload MeEnd Sub
Private Sub Form_Load()
Call myquery
''************ USER LEVEL
If userlevel = 3 Then Command1.Enabled = False Command2.Enabled = False Command4.Enabled = FalseElse Command1.Enabled = True Command2.Enabled = True Command4.Enabled = TrueEnd If
End Sub
Public Sub myquery() Call connectme conn.Open query = "SELECT c.Rent_ID,a.lastname,a.firstname,b.Plate_No,b.Brand,c.Date_Rented,c.No_of_days FROM customertable a, cartable b, renttable c WHERE a.Cus_Id = c.Cus_Id AND b.Car_Id = c.Car_Id AND c.Status='1' ORDER BY c.Date_Rented DESC" rs.Open query, conn Set DataGrid1.DataSource = rs If Not rs.EOF Then rs.MoveLast reccnt.Caption = rs.RecordCount Else reccnt.Caption = 0 End If Call datgrid DataGrid1.MarqueeStyle = 3
End SubPublic Sub datgrid() DataGrid1.Font.Size = 11 DataGrid1.Font.Name = "Arial" DataGrid1.HeadFont.Size = 11 DataGrid1.HeadFont.Bold = True DataGrid1.HeadFont.Name = "Arial"DataGrid1.Columns(0).Caption = "Rent ID"DataGrid1.Columns(0).Width = 1000DataGrid1.Columns(1).Caption = "Lastname"DataGrid1.Columns(1).Width = 2000DataGrid1.Columns(2).Caption = "Firstname"DataGrid1.Columns(2).Width = 2000DataGrid1.Columns(3).Caption = "Plate NO."DataGrid1.Columns(3).Width = 1200
DataGrid1.Columns(4).Caption = "Car Name"DataGrid1.Columns(4).Width = 2400DataGrid1.Columns(5).Caption = "Date Rented"DataGrid1.Columns(5).Width = 1200DataGrid1.Columns(6).Caption = "No.Days"DataGrid1.Columns(6).Width = 1200
End Sub
FRMRETURNTBL
Private Sub Command1_Click()Call connectmeconn.Open query = "SELECT * FROM returntable WHERE Date_Returned='" & dtsearch.Value & "' ORDER BY lastname"rs.Open query, connSet DataGrid1.DataSource = rsCall datgrid
End Sub
Private Sub Command3_Click()Dim pr
Call connectmeconn.Open pr = InputBox("Please Enter Any Key to Search!" & Chr(10) & Chr(13) & "LASTNAME/FIRSTNAME", "Searching...")If pr = "" ThenElseIf Val(pr) >= 1 Then
ElseIf pr = "All" Or pr = "all" Then query = "SELECT * FROM returntable ORDER BY Date_Returned DESC" rs.Open query, conn Set DataGrid1.DataSource = rs
Else query = "SELECT * FROM returntable WHERE Lastname LIKE '" & pr & "%' or Firstname LIKE '" & pr & "%'" rs.Open query, conn Set DataGrid1.DataSource = rs
End If
End SubPrivate Sub Command5_Click()Unload MeEnd Sub
Private Sub Form_Load()
Call myquery End Sub
Public Sub myquery() Call connectme conn.Open query = "SELECT * FROM returntable ORDER BY Date_Returned desc" rs.Open query, conn Set DataGrid1.DataSource = rs If Not rs.EOF Then rs.MoveLast reccnt.Caption = rs.RecordCount Else reccnt.Caption = 0 End If Call datgrid DataGrid1.MarqueeStyle = 3
End SubPublic Sub datgrid() DataGrid1.Font.Size = 11 DataGrid1.Font.Name = "Arial" DataGrid1.HeadFont.Size = 11 DataGrid1.HeadFont.Bold = True DataGrid1.HeadFont.Name = "Arial"DataGrid1.Columns(0).Caption = "Ret. ID"DataGrid1.Columns(0).Width = 1000DataGrid1.Columns(1).Width = 0DataGrid1.Columns(2).Width = 3200
End Sub
FORM NEW CAR
Private Sub cmd_cancel_Click()Unload MeEnd Sub
Private Sub clearfields()txt_plate_no.Text = ""txt_brand.Text = ""txt_color.Text = ""txt_speed.Text = ""
txt_rental.Text = ""txt_status.Text = ""End Sub
Private Sub cmd_save_Click()
If txt_plate_no.Text = "" Then MsgBox "Please enter Plate no", vbQuestion, "KRIN" txt_plate_no.SetFocus
ElseIf txt_brand.Text = "" Then MsgBox "Please enter Brand", vbQuestion, "KRIN" txt_brand.SetFocus
Else If car_opt = 1 Then Call addrec MsgBox "Record was successfully saved!", vbInformation, "KRIN" Unload Me ElseIf car_opt = 2 Then Call editrec MsgBox "Record was successfully updated!", vbInformation, "KRIN" Unload Me End If Call frmcartbl.myqueryEnd IfEnd Sub
Private Sub Form_Load()
Dim rs1 As ADODB.Recordset Dim rs2 As ADODB.Recordset Set rs1 = New ADODB.Recordset Set rs2 = New ADODB.Recordset Call connectme If car_opt = 2 Then conn.Open ssqlsub = "SELECT * FROM cartable WHERE Car_Id=" & carid rs2.Open ssqlsub, conn If Not rs2.EOF Then With rs2 txt_plate_no.Text = !Plate_no txt_brand.Text = !Brand txt_color.Text = !Color txt_speed.Text = !Speed txt_rental.Text = !Rental txt_status.Text = !status
End With End If conn.Close End If
End SubPublic Sub addrec()
'******** save recordCall connectmeconn.Openconn.Execute "INSERT INTO cartable(Plate_no, Brand, Color, Speed, Rental, Status) VALUES('" & txt_plate_no & "','" & txt_brand & "','" & txt_color & "','" & txt_speed.Text & "','" & txt_rental.Text & "','" & txt_status.Text & "')" End SubPublic Sub editrec()
'******** update recordCall connectme conn.Open conn.Execute "UPDATE cartable set Plate_no='" & txt_plate_no.Text & "',Brand='" & txt_brand.Text & "',Color='" & txt_color.Text & "', Speed='" & txt_speed.Text & "', Rental='" & txt_rental & "', Status='" & txt_status & "' WHERE Car_Id=" & carid End Sub
Class Module
Global variable
Public userlevelPublic myuserPublic rent_optPublic rentidPublic emp_optPublic empidPublic cust_optPublic custidPublic car_optPublic caridOption ExplicitPublic conn As ADODB.ConnectionPublic rs As ADODB.Recordset
Public Function connectme() Set conn = New ADODB.Connection Set rs = New ADODB.Recordset conn.CursorLocation = adUseClient conn.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=databasecar.mdb;Persist Security Info=False"
'conn.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=;Data Source=databasecar.mdb; Persist Security Info=False" End Function