1055 Load Chart
1
TATA MODEL 1055B LC-100 TON-CRANE CLASS 15-530 HEAVY DUTY ANGULAR BOOM RATED CRANE LOADS IN LBS.(Kg)- Main Boom BOOM ON WHICH IT IS BEING USED.WHEN BOOM IS EQUIPPED WITH JIB MAIN HOOK RATINGS SHOULD BE REDUCED BY 1500 Lbs. (680Kgs.). FOR 20 FT. JIB (6.10m) JIB, 2000Lbs. (905Kg.) FOR 30 FT. (9.14m) JIB. BACK STOPS RECOMMENDED FOR ALL BOOM LENGTHS. AT RADII OR BOOM LENGTHS WHERE NO RATINGS ARE SHOWN ON CHART, OPERATION IS NOT TENDERED OR APPROVED. RATINGS ARE BASED UPON FREELY SUSPENDED LOADS & MACHINE STANDING ON FIRM, LEVEL UNIFORMLY SUPPORTED SURFACE. SAFE LOADS DEPEND UPON GROUND CONDITIONS, BOOM LENGTHS, RADIUS OF OPERATIONAND PROPER HANDLING, ALL OF WHICH MUST BE TAKEN IN TO ACCOUNT BY THE USER. RATINGSARE CONTINGENT UPON MACHINE BEING EQUIPPED WITH PROPER BOOM. NOTE: OPERATION OF THIS EQUIPMENT IN EXCESS OF RATED LOADSAND DISREGARD OF INSTRUCTIONS VOIDS WARRANTY. CRANE SPECIFICATIONS HOIST REEVING NO OF PARTS OF LINE 1 2 4 6 8 FOR LOADS UPTO 25000 Lbs 11340 Kg. 50000 Lbs 22680 Kg. 100000 Lbs 45360 Kg. 150000 Lbs 68040 Kg. 200000 Lbs 90720 Kg. NOTE: OPERATING RADIUS IS HORIZONTAL DISTANCE FROM THE CENTRE LINE OF ROTATION TOAVERTICAL LINE THROUGH THE GRAVITY CENTRE OF THE LOAD CAPACITIES SHOWNARE NOT MORE THAN 75% OF THE TIPPING LOADS WITH MACHINE STANDING ON A FIRM, LEVEL, UNIFORMLY SUPPORTING SURFACE. THE CRANE RATINGS INCLUDE WEIGHT OF HOOK, BLOCKS, SLINGS & OTHER LOAD HANDLING ACCESSORIES. MACHINES EQUIPPED WITH FOLDING GANTRY MUST NOT BE USED FOR LIFTING OPERATIONS WITH GANTRY IN LOWERED POSITION MACHINE WITH BASIC LENGTH BOOM MAY BE TRANSPORTED OR CRAWLED WITH GANTRY IN LOWERED POSITION. STANDARD BOOM HOIST REEVING FOR CRANE AND CLAMSHELL: 8 PARTS OF THE LINE FOR BOOM LENGTHS UP THRU 70 FT. (21.34m), 10 PARTS OF THE LINE FOR BOOM LENGTHS 80 FT. (24.38m) & OVER. STANDARD BOOM HOIST REEVING FOR DRAGLINE: 8 PARTS OF THE LINE FORALL BOOM LENGTHS CENTRE HITCH REQUIRED FOR BOOM LENGTHS 80 FT. (24.38m) & OVER. WEIGHT OF LOAD HANDLING ACCESSORIES SINGLE SHEAVE HOOK BLOCK 575 Lbs 260 Kg. FOUR SHEAVE HOOK BLOCK 2875 Lbs 1305 Kg. SLINGS 2OO Lbs Approx (80 Kg. Approx.) CLAMSHELL/DRAGLINE BUCKET DEPENDS ON SIZE & MAKE JIB CRANE RATING AT ANY RADIUS FROM THE CENTRE OF ROTATION IS SAME AS CRANE RATING SHOWN IN TABLE FOR MAIN BOOM WHEN OPERATED AT THAT RADIUS BUT NOT TO EXCEED MAXIMUM JIB RATINGS SHOWN. FOR BUCKET RATINGS ON JIB DEDUCT 20% FROM JIB RATINGS. MAXIMUM JIB OPERATING RADIUS NOT TO EXCEED LENGTH OF MAIN OFFSET ANGLE JIB TO BOOM UNDER FULL LOAD MAXIMUM JIB RATINGS 20 FT. JIB (6.10m JIB) POUND (Kg.) 30 FT. JIB (9.14m JIB) POUND (Kg.) 5 16000 (7255) 15000 (6805) 10 15500 (7030) 14500 (6575) 15 15000 (6805) 14000 (6350) TATA ENGINEERING AND LOCOMOTIVE COMPANY LIMITED Jamshedpur, India. A - Width of Cab B - Height of top of Cab C - Radius of rear end D - Centre of rotation to boom to foot pin E - Height from ground to boom foot pin F - Clearance Height over fixed or folding Gantries (working position) F -Clearance height over high gantry -folded G - Counterweight ground clearance S - Overall length of crawlers Centre to centre of sprockets T - Overall width of crawlers with 42”Shoes Y - Ground clearance of carbody (lowest point) 1 10’10” 13’00” 16’07” 04’07” 07’00” 21’06” 15’3½” 04’00” 21’00” 18’00” 15’02” 14’00” 30° 35° 40° 45° 50° 55° 60° 65° 70° 75° 25° 20° 15° 80° 85° 78° 82° 15 20 25 30 35 40 10 45 50 55 60 65 70 75 80 85 90 100 105 110 115 120 95 125 130 135 140 145 150 60’ BOOM 70’ BOOM 80’ BOOM 90’ BOOM 100’ BOOM 110’ BOOM 120’ BOOM 130’ BOOM 140’ BOOM 150’ BOOM 150’ BOOM WITH 30’ FLY JIB RADIUS (IN FEETS) FROM CENTRE OF ROTATION GROUND LEVEL CENTRE OF ROTATION HEIGHT ABOVE GROUND 15° MAX AROUND 11’ 11’4’’ 16’4’’ 21’4’’ 26’4’’ 31’4’’ 36’4’’ 41’4’’ 46’4’’ 51’4’’ 56’4’’ 61’4’’ 66’4’’ 71’4’’ 76’4’’ 81’4’’ 86’4’’ 91’4’’ 96’4’’ 101’4’’ 106’4’’ 110’4’’ 116’4’’ 121’4’’ 126’4’’ 131’4’’ 136’4’’ 141’4’’ 146’4’’ 151’4’’ 156’4’’ 161’4’’ 166’4’’ 171’4’’ 176’4’’ 181’4’’ 186’4’’ 191’4’’ 155 150’ BOOM WITH 20’ FLY JIB
-
Upload
md-shahnawaz-islam -
Category
Documents
-
view
763 -
download
49
description
1055 Load Chart
Transcript of 1055 Load Chart
TATA MODEL 1055B LC-100 TON-CRANE CLASS 15-530HEAVY DUTY ANGULAR BOOM
RATED CRANE LOADS IN LBS.(Kg)- Main Boom
BOOM ON WHICH IT IS BEING USED.WHEN BOOM IS EQUIPPED WITH JIB MAIN HOOKRATINGS SHOULD BE REDUCED BY 1500 Lbs. (680Kgs.). FOR 20 FT. JIB (6.10m) JIB,2000Lbs. (905Kg.) FOR 30 FT. (9.14m) JIB.
BACK STOPS RECOMMENDED FORALL BOOM LENGTHS.AT RADII OR BOOM LENGTHSWHERE NO RATINGS ARE SHOWN ON CHART, OPERATION IS NOT TENDERED ORAPPROVED. RATINGS ARE BASED UPON FREELY SUSPENDED LOADS & MACHINESTANDING ON FIRM, LEVEL UNIFORMLY SUPPORTED SURFACE. SAFE LOADSDEPEND UPON GROUND CONDITIONS, BOOM LENGTHS, RADIUS OF OPERATIONANDPROPER HANDLING, ALL OF WHICH MUST BE TAKEN IN TO ACCOUNT BY THE USER.RATINGSARE CONTINGENT UPON MACHINE BEING EQUIPPED WITH PROPER BOOM.
NOTE: OPERATION OF THIS EQUIPMENT IN EXCESS OF RATED LOADS AND DISREGARD OF INSTRUCTIONS VOIDS WARRANTY.
CRANE SPECIFICATIONS
HOIST REEVING
NO OF PARTS OF LINE 1 2 4 6 8
FOR LOADS UPTO25000 Lbs11340 Kg.
50000 Lbs22680 Kg.
100000 Lbs
45360 Kg.150000 Lbs68040 Kg.
200000 Lbs90720 Kg.
NOTE: OPERATING RADIUS IS HORIZONTAL DISTANCE FROM THE CENTRE LINE OF ROTATION TOAVERTICAL LINE THROUGH THE GRAVITY CENTRE OF THE LOAD CAPACITIES SHOWNARENOT MORE THAN 75% OF THE TIPPING LOADS WITH MACHINE STANDING ON A FIRM, LEVEL, UNIFORMLY SUPPORTING SURFACE. THE CRANE RATINGS INCLUDE WEIGHT OF HOOK,BLOCKS, SLINGS & OTHER LOAD HANDLING ACCESSORIES. MACHINES EQUIPPED WITH FOLDING GANTRY MUST NOT BE USED FOR LIFTING OPERATIONS WITH GANTRY IN LOWEREDPOSITION MACHINE WITH BASIC LENGTH BOOM MAY BE TRANSPORTED OR CRAWLED WITH GANTRY IN LOWERED POSITION. STANDARD BOOM HOIST REEVING FOR CRANE ANDCLAMSHELL: 8 PARTS OF THE LINE FOR BOOM LENGTHS UP THRU 70 FT. (21.34m), 10 PARTS OF THE LINE FOR BOOM LENGTHS 80 FT. (24.38m) & OVER. STANDARD BOOM HOIST REEVINGFOR DRAGLINE: 8 PARTS OF THE LINE FORALLBOOM LENGTHS CENTRE HITCH REQUIRED FOR BOOM LENGTHS 80 FT. (24.38m) & OVER.
WEIGHT OF LOAD HANDLING ACCESSORIES
SINGLE SHEAVE HOOK BLOCK575 Lbs260 Kg.
FOUR SHEAVE HOOK BLOCK2875 Lbs1305 Kg.
SLINGS2OO Lbs Approx(80 Kg. Approx.)
CLAMSHELL/DRAGLINE BUCKETDEPENDS ONSIZE & MAKE
JIB CRANE RATING AT ANYRADIUS FROM THE CENTRE OFROTATION IS SAME AS CRANERATING SHOWN IN TABLE FORMAIN BOOM WHEN OPERATEDAT THAT RADIUS BUT NOT TOE X C E E D M A X I M U M J I BR AT I N G S S H O W N . F O RBUCKET RATINGS ON JIBDEDUCT 20% FROM JIBR AT I N G S . M A X I M U M J I BOPERATING RADIUS NOT TOEXCEED LENGTH OF MAIN
OFFSET ANGLEJIB TO BOOM
UNDER FULL LOAD
MAXIMUM JIB RATINGS
20 FT. JIB(6.10m JIB)
POUND(Kg.)
30 FT. JIB(9.14m JIB)
POUND(Kg.)
516000(7255)
15000(6805)
1015500(7030)
14500(6575)
1515000(6805)
14000(6350)
TATA ENGINEERING AND LOCOMOTIVE COMPANY LIMITEDJamshedpur, India.
A- Width of CabB - Height of top of CabC - Radius of rear endD - Centre of rotation to boom to foot pinE - Height from ground to boom foot pinF - Clearance Height over fixed or folding
Gantries (working position)F -Clearance height over high gantry -folded
G - Counterweight ground clearanceS - Overall length of crawlers
Centre to centre of sprocketsT - Overall width of crawlers with 42”ShoesY - Ground clearance of carbody (lowest point)
1
10’10”13’00”16’07”04’07”07’00”
21’06”15’3½”04’00”21’00”18’00”15’02”14’00”
30°
35°
40°
45°
50°
55°
60°
65°
70°
75°
25°
20°
15°
80°
85°
78°
82°
15 20 25
30 35 40
10 45 50 55 60 65 70 75 80 85
90
100
105
110
115
120
95
125
130
135
140
145
150
60’ BOOM
70’ BOOM
80’ BOOM
90’ BOOM
100’ BOOM
110’ BOOM
120’ BOOM
130’ BOOM
140’ BOOM
150’ BOOM
150’ BOOMWITH 30’ FLY JIB
RADIUS (IN FEETS) FROM CENTRE OF ROTATION
GROUND LEVEL
CE
NT
RE
OF
RO
TA
TIO
N
HE
IGH
TA
BO
VE
GR
OU
ND
15° M
AX
AR
OU
ND
11’
11’4’’
16’4’’
21’4’’
26’4’’
31’4’’
36’4’’
41’4’’
46’4’’
51’4’’
56’4’’
61’4’’
66’4’’
71’4’’
76’4’’
81’4’’
86’4’’
91’4’’
96’4’’
101’4’’
106’4’’
110’4’’
116’4’’
121’4’’
126’4’’
131’4’’
136’4’’
141’4’’
146’4’’
151’4’’
156’4’’
161’4’’
166’4’’
171’4’’
176’4’’
181’4’’
186’4’’
191’4’’
155
150’ BOOM
WITH 20’ FLY JIB
