10

305
GSM/EDGE BSS, Rel. RG20(BSS), Operating Documentation, Issue 10 PRFILE and FIFILE Parameter List DN9979835 Issue 13-2 Approval Date 2011-08-16 Confidential Nokia Siemens Networks is continually striving to reduce the adverse environmental effects of its products and services. We would like to encourage you as our customers and users to join us in working towards a cleaner, safer environment. Please recycle product packaging and follow the recommendations for power use and proper disposal of our products and their compo- nents. If you should have questions regarding our Environmental Policy or any of the environmental services we offer, please contact us at Nokia Siemens Networks for any additional information.

Transcript of 10

Page 1: 10

GSM/EDGE BSS, Rel. RG20(BSS), Operating Documentation, Issue 10

PRFILE and FIFILE Parameter List

DN9979835

Issue 13-2Approval Date 2011-08-16

Confidential

Nokia Siemens Networks is continually striving to reduce the adverse environmental effects of its products and services. We would like to encourage you as our customers and users to join us in working towards a cleaner, safer environment. Please recycle product packaging and follow the recommendations for power use and proper disposal of our products and their compo-nents.

If you should have questions regarding our Environmental Policy or any of the environmental services we offer, please contact us at Nokia Siemens Networks for any additional information.

Page 2: 10

2 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

The information in this document is subject to change without notice and describes only the product defined in the introduction of this documentation. This documentation is intended for the use of Nokia Siemens Networks customers only for the purposes of the agreement under which the document is submitted, and no part of it may be used, reproduced, modified or transmitted in any form or means without the prior written permission of Nokia Siemens Networks. The documentation has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using it. Nokia Siemens Networks welcomes customer comments as part of the process of continuous development and improvement of the documentation.

The information or statements given in this documentation concerning the suitability, capacity, or performance of the mentioned hardware or software products are given "as is" and all liability arising in connection with such hardware or software products shall be defined conclusively and finally in a separate agreement between Nokia Siemens Networks and the customer. However, Nokia Siemens Networks has made all reasonable efforts to ensure that the instructions contained in the document are adequate and free of material errors and omissions. Nokia Siemens Networks will, if deemed necessary by Nokia Siemens Networks, explain issues which may not be covered by the document.

Nokia Siemens Networks will correct errors in this documentation as soon as possible. IN NO EVENT WILL Nokia Siemens Networks BE LIABLE FOR ERRORS IN THIS DOCUMENTA-TION OR FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDI-RECT, INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA,THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT.

This documentation and the product it describes are considered protected by copyrights and other intellectual property rights according to the applicable laws.

The wave logo is a trademark of Nokia Siemens Networks Oy. Nokia is a registered trademark of Nokia Corporation. Siemens is a registered trademark of Siemens AG.

Other product names mentioned in this document may be trademarks of their respective owners, and they are mentioned for identification purposes only.

Copyright © Nokia Siemens Networks 2011. All rights reserved

f Important Notice on Product SafetyThis product may present safety risks due to laser, electricity, heat, and other sources of danger.

Only trained and qualified personnel may install, operate, maintain or otherwise handle this product and only after having carefully read the safety information applicable to this product.

The safety information is provided in the Safety Information section in the “Legal, Safety and Environmental Information” part of this document or documentation set.

The same text in German:

f Wichtiger Hinweis zur Produktsicherheit Von diesem Produkt können Gefahren durch Laser, Elektrizität, Hitzeentwicklung oder andere Gefahrenquellen ausgehen.

Installation, Betrieb, Wartung und sonstige Handhabung des Produktes darf nur durch geschultes und qualifiziertes Personal unter Beachtung der anwendbaren Sicherheits-anforderungen erfolgen.

Die Sicherheitsanforderungen finden Sie unter „Sicherheitshinweise“ im Teil „Legal, Safety and Environmental Information“ dieses Dokuments oder dieses Dokumentations-satzes.

Page 3: 10

DN9979835 3

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

Table of contentsThis document has 305 pages.

Summary of changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

1 Overview of PRFILE and FIFILE parameters . . . . . . . . . . . . . . . . . . . . 17

2 PRFILE and FIFILE parameter classes . . . . . . . . . . . . . . . . . . . . . . . . . 182.1 Parameter class: 000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182.2 Parameter class: 001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182.3 Parameter class: 002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182.4 Parameter class: 003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182.5 Parameter class: 004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182.6 Parameter class: 005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192.7 Parameter class: 006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192.8 Parameter class: 007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192.9 Parameter class: 008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192.10 Parameter class: 009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192.11 Parameter class: 010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202.12 Parameter class: 011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202.13 Parameter class: 012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202.14 Parameter class: 013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202.15 Parameter class: 014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202.16 Parameter class: 015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212.17 Parameter class: 016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212.18 Parameter class: 017 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212.19 Parameter class: 018 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212.20 Parameter class: 019 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222.21 Parameter class: 020 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222.22 Parameter class: 021 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222.23 Parameter class: 022 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222.24 Parameter class: 023 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222.25 Parameter class: 024 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232.26 Parameter class: 025 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232.27 Parameter class: 026 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232.28 Parameter class: 027 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232.29 Parameter class: 028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232.30 Parameter class: 029 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242.31 Parameter class: 030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242.32 Parameter class: 031 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242.33 Parameter class: 032 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242.34 Parameter class: 033 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242.35 Parameter class: 034 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252.36 Parameter class: 035 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252.37 Parameter class: 036 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252.38 Parameter class: 037 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252.39 Parameter class: 038 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252.40 Parameter class: 039 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Page 4: 10

4 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

2.41 Parameter class: 040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262.42 Parameter class: 041 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262.43 Parameter class: 042 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262.44 Parameter class: 043 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262.45 Parameter class: 044 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272.46 Parameter class: 045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272.47 Parameter class: 046 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272.48 Parameter class: 047 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272.49 Parameter class: 048 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282.50 Parameter class: 049 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282.51 Parameter class: 050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282.52 Parameter class: 051 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282.53 Parameter class: 052 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282.54 Parameter class: 053 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292.55 Parameter class: 054 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292.56 Parameter class: 055 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292.57 Parameter class: 056 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292.58 Parameter class: 057 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292.59 Parameter class: 058 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302.60 Parameter class: 059 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302.61 Parameter class: 060 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302.62 Parameter class: 061 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302.63 Parameter class: 062 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302.64 Parameter class: 063 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312.65 Parameter class: 064 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312.66 Parameter class: 065 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312.67 Parameter class: 066 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312.68 Parameter class: 067 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3 PRFILE and FIFILE parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323.1 Parameter class 002 SYSTEM_FUNCT_CONFIGUR . . . . . . . . . . . . . . 323.1.1 Parameter 002:0035 PRIMARY_RATE_INTERFACE . . . . . . . . . . . . . . 323.1.2 Parameter 002:0093 DOUBLE_BA_LIST . . . . . . . . . . . . . . . . . . . . . . . . 333.1.3 Parameter 002:0094 TRANSM_EQ_MML_ENABLE . . . . . . . . . . . . . . . 333.1.4 Parameter 002:0173 REMOTE_MMI . . . . . . . . . . . . . . . . . . . . . . . . . . . 343.1.5 Parameter 002:0188 T1_ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . 343.1.6 Parameter 002:0241 Q3_DX_ALARMS_FORW_ON . . . . . . . . . . . . . . . 353.1.7 Parameter 002:0283 HR_FEATURE_IN_BSC . . . . . . . . . . . . . . . . . . . . 363.1.8 Parameter 002:0361 NORTH_AMERICAN_NUMBER. . . . . . . . . . . . . . 363.1.9 Parameter 002:0371 AEC_USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373.1.10 Parameter 002:0372 TFO_USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373.1.11 Parameter 002:0380 ALLOW_OVER_16TRX . . . . . . . . . . . . . . . . . . . . 383.1.12 Parameter 002:0399 THREE_DIGIT_MNC . . . . . . . . . . . . . . . . . . . . . . 383.1.13 Parameter 002:0417 FH_IUO_USAGE . . . . . . . . . . . . . . . . . . . . . . . . . 393.1.14 Parameter 002:0418 SMSCB_LAST_BLOCK_INFO . . . . . . . . . . . . . . . 403.1.15 Parameter 002:0444 BTS_HW_DB_Q3_INT_IN_USE. . . . . . . . . . . . . . 403.1.16 Parameter 002:0461 BIN_HEADER_TYPE . . . . . . . . . . . . . . . . . . . . . . 413.1.17 Parameter 002:0466 FLEX_MAIO_USAGE . . . . . . . . . . . . . . . . . . . . . . 41

Page 5: 10

DN9979835 5

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

3.1.18 Parameter 002:0470 SMSCB_INDEPEN_MULTIPAGE . . . . . . . . . . . . 423.1.19 Parameter 002:0500 ALLOW_48_OR_64_TRX . . . . . . . . . . . . . . . . . . 433.1.20 Parameter 002:0511 ABIS_AUTOCONF_IN_USE . . . . . . . . . . . . . . . . 433.1.21 Parameter 002:0558 MS_CAP_IND_USAGE . . . . . . . . . . . . . . . . . . . . 443.1.22 Parameter 002:0602 TRE_SW_DL_MC_ADDRESS. . . . . . . . . . . . . . . 443.1.23 Parameter 002:0623 NOISE_SUPPRESSION_USAGE . . . . . . . . . . . . 453.1.24 Parameter 002:0626 DAC_USAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . 453.1.25 Parameter 002:0628 FER_USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463.1.26 Parameter 002:0643 REV_HUNT_USED . . . . . . . . . . . . . . . . . . . . . . . 473.1.27 Parameter 002:0644 DYN_ABIS_IN_USE . . . . . . . . . . . . . . . . . . . . . . 473.1.28 Parameter 002:0654 PBS_USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483.1.29 Parameter 002:0664 COMMON_BCCH_EGSM900 . . . . . . . . . . . . . . . 493.1.30 Parameter 002:0665 SEGMENT_USAGE. . . . . . . . . . . . . . . . . . . . . . . 493.1.31 Parameter 002:0666 COMMON_BCCH_GSM900 . . . . . . . . . . . . . . . . 503.1.32 Parameter 002:0667 COMMON_BCCH_GSM1800 . . . . . . . . . . . . . . . 513.1.33 Parameter 002:0668 MULTI_BCF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 513.1.34 Parameter 002:0693 FIRST_FREE_NUMBERED_CGR. . . . . . . . . . . . 523.1.35 Parameter 002:0701 S9_LOCATION_SYSTEM . . . . . . . . . . . . . . . . . . 533.1.36 Parameter 002:0702 TTY_USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 533.1.37 Parameter 002:0711 NEMU_IS_PRESENT . . . . . . . . . . . . . . . . . . . . . 543.1.38 Parameter 002:0733 COMMON_BCCH_GSM800 . . . . . . . . . . . . . . . . 543.1.39 Parameter 002:0734 COMMON_BCCH_GSM1900 . . . . . . . . . . . . . . . 553.1.40 Parameter 002:0737 GSM800_1900_USAGE . . . . . . . . . . . . . . . . . . . 563.1.41 Parameter 002:0738 GSM800_1800_USAGE . . . . . . . . . . . . . . . . . . . 563.1.42 Parameter 002:0739 ISHO_SUPPORT_IN_BSC . . . . . . . . . . . . . . . . . 573.1.43 Parameter 002:0749 LB_USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 583.1.44 Parameter 002:0750 LB_PLUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 583.1.45 Parameter 002:0764 CITARX_USAGE . . . . . . . . . . . . . . . . . . . . . . . . . 593.1.46 Parameter 002:0776 EMR_SUPPORT_IN_BSC. . . . . . . . . . . . . . . . . . 603.1.47 Parameter 002:0790 HW_INVENTORY_IN_USE . . . . . . . . . . . . . . . . . 603.1.48 Parameter 002:0809 ANTENNA_HOPPING_USAGE. . . . . . . . . . . . . . 613.1.49 Parameter 002:0814 Q3_IN_USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 623.1.50 Parameter 002:0820 TOTAL_FEP_USAGE . . . . . . . . . . . . . . . . . . . . . 623.1.51 Parameter 002:0829 LB_STACK_IN_BCSU . . . . . . . . . . . . . . . . . . . . . 633.1.52 Parameter 002:0839 BTS_METRO_SITE_BATBU_PR . . . . . . . . . . . . 643.1.53 Parameter 002:0843 BTS_ULTRA_SITE_BATBU_PR . . . . . . . . . . . . . 643.1.54 Parameter 002:0857 CHILD_CELL_BAR . . . . . . . . . . . . . . . . . . . . . . . 653.1.55 Parameter 002:0899 EXT_UTBF_USAGE . . . . . . . . . . . . . . . . . . . . . . 663.1.56 Parameter 002:0905 UTDOA_SUPPORT . . . . . . . . . . . . . . . . . . . . . . . 663.1.57 Parameter 002:0921 HW_CHANGE_NOTIF_IN_USE . . . . . . . . . . . . . 673.1.58 Parameter 002:0947 BSR_SUPPORT_IN_BSC . . . . . . . . . . . . . . . . . . 673.1.59 Parameter 002:1006 UTDOA_COMMERCIAL . . . . . . . . . . . . . . . . . . . 683.1.60 Parameter 002:1114 EQOS_TESTING_MODE . . . . . . . . . . . . . . . . . . 693.1.61 Parameter 002:1120 LAN_ADMINISTRATION . . . . . . . . . . . . . . . . . . . 703.1.62 Parameter 002:1167 COMBI_CONF_ALLOWED . . . . . . . . . . . . . . . . . 703.1.63 Parameter 002:1264 EMR_RESTRICTED . . . . . . . . . . . . . . . . . . . . . . 713.1.64 Parameter 002:1475 RNW_OM_LOG_USAGE. . . . . . . . . . . . . . . . . . . 71

Page 6: 10

6 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

3.1.65 Parameter 002:1500 BSC_PCMMAP_PATH_CTRL . . . . . . . . . . . . . . . 723.1.66 Parameter 002:1521 DUPU_WITH_CDPC. . . . . . . . . . . . . . . . . . . . . . . 733.1.67 Parameter 002:1554 SEL_OCTFIL_VARIANT_TO . . . . . . . . . . . . . . . . 743.1.68 Parameter 002:1587 HW_AUTOMATIC_CMP_IN_USE . . . . . . . . . . . . 743.1.69 Parameter 002:1588 HW_MISMATCH_ALD_IN_USE . . . . . . . . . . . . . . 753.1.70 Parameter 002:1705 MAX_WAIT_TIME_BSC_RST . . . . . . . . . . . . . . . 763.1.71 Parameter 002:1829 LOW_OVERLOAD_LIMIT. . . . . . . . . . . . . . . . . . . 763.1.72 Parameter 002:1830 HIGH_OVERLOAD_LIMIT . . . . . . . . . . . . . . . . . . 773.1.73 Parameter 002:1831 CRIT_OVERLOAD_LIMIT. . . . . . . . . . . . . . . . . . . 783.1.74 Parameter 002:1832 LOAD_HYSTERESIS . . . . . . . . . . . . . . . . . . . . . . 783.1.75 Parameter 002:1833 TIME_HYSTERESIS. . . . . . . . . . . . . . . . . . . . . . . 793.1.76 Parameter 002:1870 BASE_RTP_PORT_ETPA . . . . . . . . . . . . . . . . . . 793.1.77 Parameter 002:1871 BASE_RTP_PORT_ETPC . . . . . . . . . . . . . . . . . . 803.1.78 Parameter 002:1872 PKT_DELAY_VAR . . . . . . . . . . . . . . . . . . . . . . . . 813.1.79 Parameter 002:1873 CS_CALL_LENGTH . . . . . . . . . . . . . . . . . . . . . . . 813.1.80 Parameter 002:2035 LOW_OVERLOAD_LIMIT_ETPC . . . . . . . . . . . . . 823.1.81 Parameter 002:2036 HIGH_OVRLOAD_LMT_ETPC. . . . . . . . . . . . . . . 833.1.82 Parameter 002:2037 CRIT_OVRLOAD_LMT_ETPC . . . . . . . . . . . . . . . 833.2 Parameter class 009 SYSTEM_SUPERVISION. . . . . . . . . . . . . . . . . . . 843.2.1 Parameter 009:0008 LOAD_RATE_SAMPLE_INTERV. . . . . . . . . . . . . 843.2.2 Parameter 009:0010 CRC4_TRH_FOR_DEGRAD_MIN . . . . . . . . . . . . 853.2.3 Parameter 009:0011 CRC4_TRH_FOR_ERRORE_SEC. . . . . . . . . . . . 853.2.4 Parameter 009:0028 SEC_EVENT_ALARM_LIMIT . . . . . . . . . . . . . . . . 863.2.5 Parameter 009:0029 SEC_EVENT_MON_PERIOD. . . . . . . . . . . . . . . . 863.2.6 Parameter 009:0037 BTS_SITE_BATBU_PROC. . . . . . . . . . . . . . . . . . 873.2.7 Parameter 009:0044 EXCL_EST_CAUSES_HO_REF . . . . . . . . . . . . . 873.2.8 Parameter 009:0049 BITMAP_CHECK_RECORDS . . . . . . . . . . . . . . . 883.2.9 Parameter 009:0050 BITMAP_CHECK_BYTES . . . . . . . . . . . . . . . . . . 893.2.10 Parameter 009:0051 BITMAP_SUPERV_INTERVAL . . . . . . . . . . . . . . 893.2.11 Parameter 009:0052 CHKSUM_SUPERV_INTERVAL . . . . . . . . . . . . . 903.2.12 Parameter 009:0055 TR_EQU_COLL_START_TIM . . . . . . . . . . . . . . . 903.2.13 Parameter 009:0072 CBC_INDIC_FILT_TIMER . . . . . . . . . . . . . . . . . . 913.2.14 Parameter 009:0075 NUMBER_OF_Q1_CHANNELS . . . . . . . . . . . . . . 923.2.15 Parameter 009:0079 TRE_CHKSUM_COLL_COUNT . . . . . . . . . . . . . . 923.2.16 Parameter 009:0090 BTS_Q1_RT_UPDATE_COUNT . . . . . . . . . . . . . 933.2.17 Parameter 009:0098 SDCCH_SIGN_SUP_BTS_MSC . . . . . . . . . . . . . 943.2.18 Parameter 009:0137 SEC_EVENT_LOAD_LIMIT . . . . . . . . . . . . . . . . . 943.2.19 Parameter 009:0138 SEC_EVENT_UNSUC_LIMIT. . . . . . . . . . . . . . . . 953.2.20 Parameter 009:0172 ONE_BIT_ERRORS_LIMIT . . . . . . . . . . . . . . . . . 963.3 Parameter class 010 IMPLEMENTA_OF_CALL_CTRL . . . . . . . . . . . . . 963.3.1 Parameter 010:0004 PCM_MAINT_ANNOUNCE_TL . . . . . . . . . . . . . . 963.3.2 Parameter 010:0005 DR_USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 973.3.3 Parameter 010:0006 IDR_USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 973.3.4 Parameter 010:0007 TR_USAGE_IN_MTC . . . . . . . . . . . . . . . . . . . . . . 983.3.5 Parameter 010:0008 TR_USAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 993.3.6 Parameter 010:0011 CM_BASED_SUBS_TYPE . . . . . . . . . . . . . . . . . . 993.3.7 Parameter 010:0012 PRIOR_BASED_SERV_SEP . . . . . . . . . . . . . . . 100

Page 7: 10

DN9979835 7

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

3.3.8 Parameter 010:0014 C2_CELL_RESEL . . . . . . . . . . . . . . . . . . . . . . . 1003.3.9 Parameter 010:0015 FACCH_CALL_SET_UP . . . . . . . . . . . . . . . . . . 1013.3.10 Parameter 010:0016 PREEMPT_USAGE . . . . . . . . . . . . . . . . . . . . . . 1013.3.11 Parameter 010:0019 CI_BASED_HO_EVAL_P . . . . . . . . . . . . . . . . . 1023.3.12 Parameter 010:0020 EXT_CELL_USAGE_P . . . . . . . . . . . . . . . . . . . 1023.3.13 Parameter 010:0021 MS_PWR_OPT_IN_HO_P. . . . . . . . . . . . . . . . . 1033.3.14 Parameter 010:0022 SDCCH_HO_USAGE_P . . . . . . . . . . . . . . . . . . 1033.3.15 Parameter 010:0023 UNDERLAY_OVERLAY_US_P . . . . . . . . . . . . . 1043.3.16 Parameter 010:0024 CHAINED_CELL_USAGE_P. . . . . . . . . . . . . . . 1053.3.17 Parameter 010:0025 FMMS_USAGE_P . . . . . . . . . . . . . . . . . . . . . . . 1053.3.18 Parameter 010:0026 DUAL_BAND_USAGE_P. . . . . . . . . . . . . . . . . . 1063.3.19 Parameter 010:0027 RNOS_USAGE_P . . . . . . . . . . . . . . . . . . . . . . . 1063.3.20 Parameter 010:0028 RXQ_HAC_USAGE_P. . . . . . . . . . . . . . . . . . . . 1073.3.21 Parameter 010:0030 DISTANCE_VERIFYING . . . . . . . . . . . . . . . . . . 1073.3.22 Parameter 010:0031 SATELL_ABIS_IN_USE. . . . . . . . . . . . . . . . . . . 1083.3.23 Parameter 010:0032 Q3_BTS_HW_REM_INQ_USE . . . . . . . . . . . . . 1093.3.24 Parameter 010:0033 EFR_SUPPORT_IN_BSC . . . . . . . . . . . . . . . . . 1093.3.25 Parameter 010:0034 SMS_CB_DRX_USD_IN_BSC . . . . . . . . . . . . . 1103.3.26 Parameter 010:0035 HOT_SPOT_USAGE_P. . . . . . . . . . . . . . . . . . . 1113.3.27 Parameter 010:0036 CI_STATISTICS_USAGE_P . . . . . . . . . . . . . . . 1113.3.28 Parameter 010:0042 DYNAMIC_SDCCH . . . . . . . . . . . . . . . . . . . . . . 1123.3.29 Parameter 010:0044 SMS_CBC_USD_IN_BSC . . . . . . . . . . . . . . . . . 1133.3.30 Parameter 010:0045 ICE_USAGE_P . . . . . . . . . . . . . . . . . . . . . . . . . 1133.3.31 Parameter 010:0046 ERFD_USAGE_P . . . . . . . . . . . . . . . . . . . . . . . 1143.3.32 Parameter 010:0047 HSCSD_USAGE . . . . . . . . . . . . . . . . . . . . . . . . 1153.3.33 Parameter 010:0048 DATA_144_USAGE. . . . . . . . . . . . . . . . . . . . . . 1153.3.34 Parameter 010:0050 DADLB_USAGE_P . . . . . . . . . . . . . . . . . . . . . . 1163.3.35 Parameter 010:0051 DC_OBSERVATION_USAGE . . . . . . . . . . . . . . 1173.3.36 Parameter 010:0052 FCS_SET_USAGE . . . . . . . . . . . . . . . . . . . . . . 1173.3.37 Parameter 010:0053 AMH_USAGE_P . . . . . . . . . . . . . . . . . . . . . . . . 1183.3.38 Parameter 010:0065 CHAN_FIN_USAGE_P . . . . . . . . . . . . . . . . . . . 1193.3.39 Parameter 010:0068 RCS_FER_FILTER . . . . . . . . . . . . . . . . . . . . . . 1193.3.40 Parameter 010:0071 DTM_CALL_PENALTY_TIMER. . . . . . . . . . . . . 1203.4 Parameter class 012 OVERLOAD. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1213.4.1 Parameter 012:0039 NAMETBL_MAX_SERV. . . . . . . . . . . . . . . . . . . 1213.5 Parameter class 016 ALARM_SYSTEM . . . . . . . . . . . . . . . . . . . . . . . 1213.5.1 Parameter 016:0000 ALARM_PRINT_END_MARK . . . . . . . . . . . . . . 1213.5.2 Parameter 016:0001 LAMP_PANEL_POLARITY . . . . . . . . . . . . . . . . 1223.5.3 Parameter 016:0002 ALARM_DRIVEN_OUTPUTS . . . . . . . . . . . . . . 1233.5.4 Parameter 016:0003 LAMP_PANEL_BUZZER . . . . . . . . . . . . . . . . . . 1233.5.5 Parameter 016:0007 BTS_ALARM_FILTERING_USE . . . . . . . . . . . . 1243.6 Parameter class 037 RADIO_NW_CTRL_REL . . . . . . . . . . . . . . . . . . 1253.6.1 Parameter 037:0000 ATTN_FOR_2_GEN_BTS . . . . . . . . . . . . . . . . . 1253.6.2 Parameter 037:0001 ATTN_FOR_3_GEN_BTS . . . . . . . . . . . . . . . . . 1263.6.3 Parameter 037:0002 ATTN_FOR_4_GEN_BTS . . . . . . . . . . . . . . . . . 1263.6.4 Parameter 037:0003 ATTENUATED_CH_NBR_1 . . . . . . . . . . . . . . . 1273.6.5 Parameter 037:0004 ATTENUATED_CH_NBR_2 . . . . . . . . . . . . . . . 127

Page 8: 10

8 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

3.6.6 Parameter 037:0005 ATTENUATED_CH_NBR_3 . . . . . . . . . . . . . . . . 1283.6.7 Parameter 037:0006 ATTENUATED_CH_NBR_4 . . . . . . . . . . . . . . . . 1283.6.8 Parameter 037:0007 ATTENUATED_CH_NBR_5 . . . . . . . . . . . . . . . . 1293.6.9 Parameter 037:0008 ATTENUATED_CH_NBR_6 . . . . . . . . . . . . . . . . 1303.6.10 Parameter 037:0009 ATTENUATED_CH_NBR_7 . . . . . . . . . . . . . . . . 1303.6.11 Parameter 037:0010 ATTENUATED_CH_NBR_8 . . . . . . . . . . . . . . . . 1313.6.12 Parameter 037:0011 ATTENUATED_CH_NBR_9 . . . . . . . . . . . . . . . . 1313.6.13 Parameter 037:0012 ATTENUATED_CH_NBR_10 . . . . . . . . . . . . . . . 1323.6.14 Parameter 037:0013 ATTENUATED_CH_NBR_11 . . . . . . . . . . . . . . . 1323.6.15 Parameter 037:0014 ATTENUATED_CH_NBR_12 . . . . . . . . . . . . . . . 1333.6.16 Parameter 037:0015 ATTENUATED_CH_NBR_13 . . . . . . . . . . . . . . . 1333.6.17 Parameter 037:0016 ATTENUATED_CH_NBR_14 . . . . . . . . . . . . . . . 1343.6.18 Parameter 037:0017 ATTENUATED_CH_NBR_15 . . . . . . . . . . . . . . . 1343.6.19 Parameter 037:0018 ATTENUATED_CH_NBR_16 . . . . . . . . . . . . . . . 1353.6.20 Parameter 037:0019 ATTENUATED_CH_NBR_17 . . . . . . . . . . . . . . . 1353.6.21 Parameter 037:0022 ATTN_FOR_METROSITE_BTS . . . . . . . . . . . . . 1363.6.22 Parameter 037:0024 ATTN_FOR_ULTRASITE_BTS . . . . . . . . . . . . . 1373.6.23 Parameter 037:0025 ATTN_FOR_INSITE_BTS. . . . . . . . . . . . . . . . . . 1373.6.24 Parameter 037:0026 ATT_850_CH_NBR_1. . . . . . . . . . . . . . . . . . . . . 1383.6.25 Parameter 037:0027 ATT_850_CH_NBR_2. . . . . . . . . . . . . . . . . . . . . 1383.6.26 Parameter 037:0028 ATT_850_CH_NBR_3. . . . . . . . . . . . . . . . . . . . . 1393.6.27 Parameter 037:0029 ATT_850_CH_NBR_4. . . . . . . . . . . . . . . . . . . . . 1393.6.28 Parameter 037:0030 ATT_850_CH_NBR_5. . . . . . . . . . . . . . . . . . . . . 1403.6.29 Parameter 037:0031 ATT_850_CH_NBR_6. . . . . . . . . . . . . . . . . . . . . 1403.6.30 Parameter 037:0032 ATT_850_CH_NBR_7. . . . . . . . . . . . . . . . . . . . . 1413.6.31 Parameter 037:0033 ATT_850_CH_NBR_8. . . . . . . . . . . . . . . . . . . . . 1413.6.32 Parameter 037:0034 ATT_850_CH_NBR_9. . . . . . . . . . . . . . . . . . . . . 1423.6.33 Parameter 037:0035 ATT_850_CH_NBR_10. . . . . . . . . . . . . . . . . . . . 1423.6.34 Parameter 037:0036 INC_SIGNAL_WAITING_TIME. . . . . . . . . . . . . . 1433.6.35 Parameter 037:0037 ATTN_FOR_800_CH_6_ULTRA . . . . . . . . . . . . 1443.6.36 Parameter 037:0038 ATTN_FOR_800_CH_7_ULTRA . . . . . . . . . . . . 1443.6.37 Parameter 037:0039 IUO_RECOVERY_NOT_DONE . . . . . . . . . . . . . 1453.6.38 Parameter 037:0040 MAX_BSC_TRE_SW_DL_COUNT. . . . . . . . . . . 1453.6.39 Parameter 037:0041 MAX_BTS_TRE_SW_DL_COUNT . . . . . . . . . . . 1463.6.40 Parameter 037:0042 SYNC_RECOV_ENABLED. . . . . . . . . . . . . . . . . 1463.6.41 Parameter 037:0043 LMUSYN_LOSS_ALARM_LIMIT . . . . . . . . . . . . 1473.6.42 Parameter 037:0044 LMUSYN_LOSS_RESET_LIMIT . . . . . . . . . . . . 1483.6.43 Parameter 037:0046 LMUSYN_LOSS_C_RESET_LIM . . . . . . . . . . . . 1483.7 Parameter class 038 MML_COMMAND_LOG . . . . . . . . . . . . . . . . . . . 1493.7.1 Parameter 038:0000 WRITE_CACHE_TIMEOUT . . . . . . . . . . . . . . . . 1493.7.2 Parameter 038:0001 STORAGE_LENGTH . . . . . . . . . . . . . . . . . . . . . 1503.7.3 Parameter 038:0002 MAX_FILE_COUNT . . . . . . . . . . . . . . . . . . . . . . 1503.7.4 Parameter 038:0003 ADMINISTRATION_HOUR. . . . . . . . . . . . . . . . . 1513.7.5 Parameter 038:0004 ADMINISTRATION_MINUTES . . . . . . . . . . . . . . 1523.8 Parameter class 044 MML_SESSION . . . . . . . . . . . . . . . . . . . . . . . . . 1523.8.1 Parameter 044:0000 PW_CHAR_TO_PRINT . . . . . . . . . . . . . . . . . . . 1523.8.2 Parameter 044:0001 FIRST_MMI_LOGIN_DELAY . . . . . . . . . . . . . . . 153

Page 9: 10

DN9979835 9

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

3.8.3 Parameter 044:0002 MAX_MMI_LOGIN_DELAY . . . . . . . . . . . . . . . . 1533.8.4 Parameter 044:0003 OVERFLOW_LOGIN_DELAY . . . . . . . . . . . . . . 1543.8.5 Parameter 044:0005 DISCLAIMER_TEXT . . . . . . . . . . . . . . . . . . . . . 1553.8.6 Parameter 044:0006 DEF_MAIN_HEADING_TEXT . . . . . . . . . . . . . . 1553.9 Parameter class 046 PCU_TELECOM_PARAMETERS . . . . . . . . . . . 1563.9.1 Parameter 046:0046 MEMORY_OUT_FLAG_SUM . . . . . . . . . . . . . . 1563.9.2 Parameter 046:0047 EGPRS_UPLINK_PENALTY . . . . . . . . . . . . . . . 1573.9.3 Parameter 046:0048 EGPRS_UPLINK_THRESHOLD . . . . . . . . . . . . 1583.9.4 Parameter 046:0049 EGPRS_DOWNLINK_PENALTY. . . . . . . . . . . . 1583.9.5 Parameter 046:0050 EGPRS_DWNLINK_THRESHOLD . . . . . . . . . . 1593.9.6 Parameter 046:0051 GPRS_UPLINK_PENALTY . . . . . . . . . . . . . . . . 1603.9.7 Parameter 046:0052 GPRS_UPLINK_THRESHOLD . . . . . . . . . . . . . 1603.9.8 Parameter 046:0053 GPRS_DOWNLINK_PENALTY . . . . . . . . . . . . . 1613.9.9 Parameter 046:0054 GPRS_DOWNLINK_THRESHOLD . . . . . . . . . . 1623.9.10 Parameter 046:0055 UPLNK_RX_LEV_FRG_FACTOR. . . . . . . . . . . 1623.9.11 Parameter 046:0059 TERRIT_BALANCE_THRSHLD . . . . . . . . . . . . 1633.9.12 Parameter 046:0060 TERRIT_UPD_GTIME_GPRS. . . . . . . . . . . . . . 1643.9.13 Parameter 046:0061 TBF_LOAD_GUARD_THRSHLD. . . . . . . . . . . . 1653.9.14 Parameter 046:0062 TBF_SIGNAL_GRD_THRSHLD . . . . . . . . . . . . 1653.9.15 Parameter 046:0064 PRE_EMPTIVE_TRANSMISSIO . . . . . . . . . . . . 1663.9.16 Parameter 046:0066 BCCH_BAND_TBF_THRSHLD . . . . . . . . . . . . . 1663.9.17 Parameter 046:0067 DL_TBF_RELEASE_DELAY . . . . . . . . . . . . . . . 1673.9.18 Parameter 046:0068 UL_TBF_RELEASE_DELAY . . . . . . . . . . . . . . . 1683.9.19 Parameter 046:0071 UL_TBF_REL_DELAY_EXT . . . . . . . . . . . . . . . 1683.9.20 Parameter 046:0072 UL_TBF_SCHED_RATE_EXT. . . . . . . . . . . . . . 1693.9.21 Parameter 046:0085 POLLING_INTERVAL_STRM . . . . . . . . . . . . . . 1693.9.22 Parameter 046:0086 POLLING_INTERVAL_IA. . . . . . . . . . . . . . . . . . 1703.9.23 Parameter 046:0087 POLLING_INTERVAL_BG. . . . . . . . . . . . . . . . . 1713.9.24 Parameter 046:0090 PFC_PFT_LEGACY_STRM . . . . . . . . . . . . . . . 1713.9.25 Parameter 046:0091 EGPRS_GPRS_MUX_PENALTY . . . . . . . . . . . 1723.9.26 Parameter 046:0092 GPRS_UL_MUX_DEC_FACTOR . . . . . . . . . . . 1723.9.27 Parameter 046:0093 EGPRS_DL_MUX_DEC_FACTOR . . . . . . . . . . 1733.9.28 Parameter 046:0096 NCCR_NON_DRX_PERIOD . . . . . . . . . . . . . . . 1743.9.29 Parameter 046:0097 NCCR_MEAS_REPORT_TYPE . . . . . . . . . . . . 1743.9.30 Parameter 046:0099 SUSPEND_PCU_LOAD_NOTIF . . . . . . . . . . . . 1753.9.31 Parameter 046:0100 CHA_CONC_UL_TBF_FAV_DIR . . . . . . . . . . . 1763.9.32 Parameter 046:0101 CHA_CONC_DL_TBF_FAV_DIR . . . . . . . . . . . 1773.9.33 Parameter 046:0102 PFC_PFT_MAX_NRT . . . . . . . . . . . . . . . . . . . . 1773.9.34 Parameter 046:0103 PFC_PFT_MAX_RT. . . . . . . . . . . . . . . . . . . . . . 1783.9.35 Parameter 046:0105 DTM_CALL_ASSIGN_TIMER . . . . . . . . . . . . . . 1793.9.36 Parameter 046:0106 MAX_LAPD_LENGHT . . . . . . . . . . . . . . . . . . . . 1793.9.37 Parameter 046:0107 DTM_MS_CL_11_SUPP_EDA . . . . . . . . . . . . . 1803.9.38 Parameter 046:0109 IBNACC_POLLING_TIME . . . . . . . . . . . . . . . . . 1813.9.39 Parameter 046:0110 LBNCCR_MIN_INTERVAL_PLR . . . . . . . . . . . . 1813.9.40 Parameter 046:0111 QOS_UPGRADE_TIME. . . . . . . . . . . . . . . . . . . 1823.9.41 Parameter 046:0113 POLLING_INTERVAL_BG_LOW. . . . . . . . . . . . 1823.9.42 Parameter 046:0114 POLLING_INTERVAL_IA_LOW . . . . . . . . . . . . 183

Page 10: 10

10 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

3.9.43 Parameter 046:0115 POLLING_INTERVAL_ST_LOW . . . . . . . . . . . . 1843.9.44 Parameter 046:0116 DL_DTM_TBF_REL_DELAY . . . . . . . . . . . . . . . 1843.9.45 Parameter 046:0117 UL_DTM_TBF_RELDELAY_EXT . . . . . . . . . . . . 1853.9.46 Parameter 046:0118 UL_DTM_TBF_REL_DELAY . . . . . . . . . . . . . . . 1863.9.47 Parameter 046:0119 RESEGMENT_MODE. . . . . . . . . . . . . . . . . . . . . 1863.9.48 Parameter 046:0123 PCU_COLD_RST_ALLOWED . . . . . . . . . . . . . . 1873.9.49 Parameter 046:0126 BTS_DLDC_TSL_BALANC_THR . . . . . . . . . . . . 1883.10 Parameter class 049 GB_INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . 1883.10.1 Parameter 049:0000 TNS_BLOCK. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1883.10.2 Parameter 049:0001 TNS_RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1893.10.3 Parameter 049:0002 TNS_TEST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1893.10.4 Parameter 049:0003 TNS_ALIVE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1903.10.5 Parameter 049:0005 NS_BLOCK_RETRIES . . . . . . . . . . . . . . . . . . . . 1903.10.6 Parameter 049:0006 NS_UNBLOCK_RETRIES . . . . . . . . . . . . . . . . . 1913.10.7 Parameter 049:0007 NS_ALIVE_RETRIES . . . . . . . . . . . . . . . . . . . . . 1913.10.8 Parameter 049:0008 NS_RESET_RETRIES . . . . . . . . . . . . . . . . . . . . 1923.10.9 Parameter 049:0009 TGB_BLOCK. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1933.10.10 Parameter 049:0010 TGB_RESET. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1933.10.11 Parameter 049:0011 TGB_SUSPEND . . . . . . . . . . . . . . . . . . . . . . . . . 1943.10.12 Parameter 049:0013 BVC_BLOCK_RETRIES . . . . . . . . . . . . . . . . . . . 1943.10.13 Parameter 049:0014 BVC_UNBLOCK_RETRIES . . . . . . . . . . . . . . . . 1953.10.14 Parameter 049:0015 BVC_RESET_RETRIES . . . . . . . . . . . . . . . . . . . 1953.10.15 Parameter 049:0016 SUSPEND_RETRIES . . . . . . . . . . . . . . . . . . . . . 1963.10.16 Parameter 049:0020 FC_R_DIF_TRG_LIMIT . . . . . . . . . . . . . . . . . . . 1963.10.17 Parameter 049:0021 FC_MS_R_DEF . . . . . . . . . . . . . . . . . . . . . . . . . 1973.10.18 Parameter 049:0022 FC_MS_R_DEF_EGPRS . . . . . . . . . . . . . . . . . . 1973.10.19 Parameter 049:0023 FC_MS_R_MIN. . . . . . . . . . . . . . . . . . . . . . . . . . 1983.10.20 Parameter 049:0024 FC_MS_B_MAX_DEF. . . . . . . . . . . . . . . . . . . . . 1983.10.21 Parameter 049:0025 FC_MS_B_MAX_DEF_EGPRS . . . . . . . . . . . . . 1993.10.22 Parameter 049:0026 FC_R_TSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1993.10.23 Parameter 049:0027 FC_R_TSL_EGPRS . . . . . . . . . . . . . . . . . . . . . . 2003.10.24 Parameter 049:0028 FC_B_MAX_TSL. . . . . . . . . . . . . . . . . . . . . . . . . 2003.10.25 Parameter 049:0029 FC_B_MAX_TSL_EGPRS . . . . . . . . . . . . . . . . . 2013.10.26 Parameter 049:0031 TSNS_PROV . . . . . . . . . . . . . . . . . . . . . . . . . . . 2023.10.27 Parameter 049:0032 SNS_ADD_RETRIES . . . . . . . . . . . . . . . . . . . . . 2023.10.28 Parameter 049:0033 SNS_CONFIG_RETRIES . . . . . . . . . . . . . . . . . . 2033.10.29 Parameter 049:0034 SNS_CHANGEWEIGHTS_RETRI . . . . . . . . . . . 2033.10.30 Parameter 049:0035 SNS_DELETE_RETRIES . . . . . . . . . . . . . . . . . . 2043.10.31 Parameter 049:0036 SNS_SIZE_RETRIES . . . . . . . . . . . . . . . . . . . . . 2043.10.32 Parameter 049:0037 TGB_RAC_UPDATE. . . . . . . . . . . . . . . . . . . . . . 2053.10.33 Parameter 049:0038 RAC_UPDATE_RETRIES . . . . . . . . . . . . . . . . . 2053.10.34 Parameter 049:0052 CONVERSATIONAL_ARP1 . . . . . . . . . . . . . . . . 2063.10.35 Parameter 049:0053 CONVERSATIONAL_ARP2 . . . . . . . . . . . . . . . . 2063.10.36 Parameter 049:0054 CONVERSATIONAL_ARP3 . . . . . . . . . . . . . . . . 2073.10.37 Parameter 049:0055 STREAMING_ARP1 . . . . . . . . . . . . . . . . . . . . . . 2083.10.38 Parameter 049:0056 STREAMING_ARP2 . . . . . . . . . . . . . . . . . . . . . . 2083.10.39 Parameter 049:0057 STREAMING_ARP3 . . . . . . . . . . . . . . . . . . . . . . 209

Page 11: 10

DN9979835 11

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

3.10.40 Parameter 049:0058 INTERACT_PRIOR_1_ARP1 . . . . . . . . . . . . . . 2093.10.41 Parameter 049:0059 INTERACT_PRIOR_1_ARP2 . . . . . . . . . . . . . . 2103.10.42 Parameter 049:0060 INTERACT_PRIOR_1_ARP3 . . . . . . . . . . . . . . 2113.10.43 Parameter 049:0061 INTERACT_PRIOR_2_ARP1 . . . . . . . . . . . . . . 2113.10.44 Parameter 049:0062 INTERACT_PRIOR_2_ARP2 . . . . . . . . . . . . . . 2123.10.45 Parameter 049:0063 INTERACT_PRIOR_2_ARP3 . . . . . . . . . . . . . . 2123.10.46 Parameter 049:0064 INTERACT_PRIOR_3_ARP1 . . . . . . . . . . . . . . 2133.10.47 Parameter 049:0065 INTERACT_PRIOR_3_ARP2 . . . . . . . . . . . . . . 2143.10.48 Parameter 049:0066 INTERACT_PRIOR_3_ARP3 . . . . . . . . . . . . . . 2143.10.49 Parameter 049:0067 BACKGROUND_ARP1 . . . . . . . . . . . . . . . . . . . 2153.10.50 Parameter 049:0068 BACKGROUND_ARP2 . . . . . . . . . . . . . . . . . . . 2153.10.51 Parameter 049:0069 BACKGROUND_ARP3 . . . . . . . . . . . . . . . . . . . 2163.10.52 Parameter 049:0072 RESUME_RETRIES . . . . . . . . . . . . . . . . . . . . . 2173.10.53 Parameter 049:0073 TGB_RESUME . . . . . . . . . . . . . . . . . . . . . . . . . 2173.10.54 Parameter 049:0082 PS_NULL_NRI_SUPPORT . . . . . . . . . . . . . . . . 2183.11 Parameter class 050 REPORT_FORMING. . . . . . . . . . . . . . . . . . . . . 2183.11.1 Parameter 050:0001 MEA_REPORT_FORMATS. . . . . . . . . . . . . . . . 2183.12 Parameter class 053 MSC_SERVER_PARAMETERS . . . . . . . . . . . . 2193.12.1 Parameter 053:0000 MSC_SERVER_SUPPORTED . . . . . . . . . . . . . 2193.12.2 Parameter 053:0009 DSCP_FOR_SIGNALLING . . . . . . . . . . . . . . . . 2203.13 Parameter class 056 STLOG_FACILITIES . . . . . . . . . . . . . . . . . . . . . 2213.13.1 Parameter 056:0000 LOG_ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2213.14 Parameter class 058 OAM_SECURITY. . . . . . . . . . . . . . . . . . . . . . . . 2223.14.1 Parameter 058:0000 PW_POLICY_FEATURE . . . . . . . . . . . . . . . . . . 2223.14.2 Parameter 058:0001 UA_POLICY_FEATURE . . . . . . . . . . . . . . . . . . 2233.14.3 Parameter 058:0002 SSH_SERVER_FEATURE . . . . . . . . . . . . . . . . 2243.14.4 Parameter 058:0003 SFTP_SERVER_FEATURE . . . . . . . . . . . . . . . 2243.14.5 Parameter 058:0004 USER_ACCOUNT_LOCK_LIMIT . . . . . . . . . . . 2253.14.6 Parameter 058:0005 CONF_INTERFACES_FEATURE . . . . . . . . . . . 2263.15 Parameter class 060 MANAGEMENT_PROTOCOLS. . . . . . . . . . . . . 2273.15.1 Parameter 060:0000 Q3_FM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2273.15.2 Parameter 060:0001 Q3_PM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2273.15.3 Parameter 060:0002 Q3_CM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2283.15.4 Parameter 060:0003 Q3_SW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2293.15.5 Parameter 060:0004 Q3_HW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2293.15.6 Parameter 060:0005 Q3_TRACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2303.15.7 Parameter 060:0006 Q3_UM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2303.15.8 Parameter 060:0007 NE3S_FM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2313.15.9 Parameter 060:0008 NE3S_PM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2323.15.10 Parameter 060:0009 NE3S_CM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2323.15.11 Parameter 060:0010 NE3S_SW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2333.15.12 Parameter 060:0011 NE3S_LM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2333.15.13 Parameter 060:0012 NE3S_HW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2343.15.14 Parameter 060:0013 NE3S_UM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2353.15.15 Parameter 060:0014 NE3S_TRACE . . . . . . . . . . . . . . . . . . . . . . . . . . 2353.15.16 Parameter 060:0015 NE3S_ATL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2363.15.17 Parameter 060:0016 NE3S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

Page 12: 10

12 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

4 PRFILE and FIFILE parameter index by parameter class . . . . . . . . . . 238

5 PRFILE and FIFILE parameter index by parameter name . . . . . . . . . . 256

6 PRFILE and FIFILE parameter index by parameter function . . . . . . . . 272

7 PRFILE and FIFILE parameter index by parameter number . . . . . . . . 289

Page 13: 10

DN9979835 13

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

List of tablesTable 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Table 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Table 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Table 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187Table 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237Table 6 Index by parameter class. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238Table 7 Index by parameter name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256Table 8 Index by parameter function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272Table 9 Index by parameter number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289

Page 14: 10

14 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d80580895687Confidential

Page 15: 10

DN9979835 15

PRFILE and FIFILE Parameter List Summary of changes

Id:0900d805808a9397Confidential

Summary of changesChanges between document issues are cumulative. Therefore, the latest document issue contains all changes made to previous issues.

Changes made between issues 13-2 and 13-1The following parameters are new:

• 002:2035 LOW_OVERLOAD_LIMIT_ETPC • 002:2036 HIGH_OVRLOAD_LMT_ETPC • 002:2037 CRIT_OVRLOAD_LMT_ETPC

Changes made between issues 13-1 and 13-0The following parameters are new:

• 009:0172 ONE_BIT_ERRORS_LIMIT

Changes made between issues 13-0 and 12-0Added new parameter class 66 and 67.

Added new parameter index by parameter class NE3S.

The following parameters are new:

• 002:1521 DUPU_WITH_CDPC • 002:1587 HW_AUTOMATIC_CMP_IN_USE • 002:1588 HW_MISMATCH_ALD_IN_USE • 002:1705 MAX_WAIT_TIME_BSC_RST • 002:1829 LOW_OVERLOAD_LIMIT • 002:1830 HIGH_OVERLOAD_LIMIT • 002:1831 CRIT_OVERLOAD_LIMIT • 002:1832 LOAD_HYSTERESIS • 002:1833 TIME_HYSTERESIS • 002:1870 BASE_RTP_PORT_ETPA • 002:1871 BASE_RTP_PORT_ETPC • 002:1872 PKT_DELAY_VAR • 002:1873 CS_CALL_LENGTH • 046:0123 PCU_COLD_RST_ALLOWED • 060:0016 NE3S

The following parameters have been modified:

• 002:0188 T1_ENVIRONMENT • 002:0664 COMMON_BCCH_EGSM900 • 002:0666 COMMON_BCCH_GSM900 • 050:0001 MEA_REPORT_FORMATS

Changes made between issues 12-0 and 11-2Added new parameter class 59.

The following parameters are new:

• 002:1475 RNW_OM_LOG_USAGE • 002:1500 BSC_PCMMAP_PATH_CTRL • 002:1554 SEL_OCTFIL_VARIANT_TO

Page 16: 10

16 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9397Confidential

Summary of changes

• 046:0119 RESEGMENT_MODE • 046:0126 BTS_DLDC_TSL_BALANC_THR • 056:0000 LOG_ON • 058:0004 USER_ACCOUNT_LOCK_LIMIT • 058:0005 CONF_INTERFACES_FEATURE

Changes made between issues 11-2 and 11-1Parameter 002:0858 ADJC_INDEX_USAGE_IN_Q3 has been removed.

Changes made between issues 11-1 and 11-0Parameter 046:0112 NEW_DL_TBF_RET_DELAY has been removed.

The maximum value of parameter 049:0008 NS_RESET_RETRIES has been changed.

Page 17: 10

DN9979835 17

PRFILE and FIFILE Parameter List Overview of PRFILE and FIFILE parameters

Id:0900d8058075d096Confidential

1 Overview of PRFILE and FIFILE parametersParameters are handled in the BSC with the aid of three parameter files: PRFILE (General Parameter File), FIFILE (Feature Information Control File) and PAFILE (BSC Control Parameter File). All the information about controlling the basic software and application software of the BSC is stored in the PRFILE and FIFILE. The files are admin-istered (modification, output) with the Parameter Handling MML (WO command group). PAFILE is used for storing modified values of GSM/BSC parameters.

PRFILE and FIFILEThe BSC has a set of application software solutions which are not included in the basic software but the customer can choose them to be included (optional). There is also a set of application software solutions which are typical in all BSCs but the extent of their use depends on the delivery (standard).

All the information about controlling the above software is assembled in the BSC in the PRFILE (General Parameter File) and the FIFILE (Feature Information Control File). The FIFILE file has been created for optionality parameters from the PRFILE. The FIFILE file is located in all computer units into which it is loaded from OMU disk. The FIFILE contains parameters which control the new application software and the activa-tion status of the new optionality parameters. Both the FIFILE and the PRFILE are generic files. The same FIFILE(GX) is used for every network element. You can modify and interrogate the contents of the files with the Parameter Handling MML WO command group commands.

For more detailed instructions on the commands and their parameters, see WO - Parameter Handling under Reference/Commands/MML Commands.

Interrogating and modifying standard, S9 and previous releases' optional param-etersTo interrogate the value of a standard delivery parameter, use the command WOI.

To modify the value of a standard delivery parameter, or S9 and previous releases' optional delivery parameter, use the command WOC.

Interrogating and modifying S10 and later optional parametersTo list and output BSC S10 or later application software, use the command WOS.

To activate or deactivate a BSC S10 or later application software, use the command WOA.

Page 18: 10

18 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d099Confidential

PRFILE and FIFILE parameter classes

2 PRFILE and FIFILE parameter classes

2.1 Parameter class: 000ANNOUNCEMENT_DEVICE

Descriptive NameTechnical parameters of announcement device

DescriptionThis class includes technical parameters of the announcement device that are related to time supervision and release sequences.

2.2 Parameter class: 001CHARGING

Descriptive NameCharging

DescriptionThis class includes charging parameters.

2.3 Parameter class: 002SYSTEM_FUNCT_CONFIGUR

Descriptive NameSystem functions configuration

DescriptionParameters in this class specify the functional configuration of each delivery, i.e. the functions that are included or excluded.

2.4 Parameter class: 003SUBSCRIBER_FACILITIES

Descriptive NameParameters of subscriber facilities

DescriptionThe parameter class includes information on the use of subscriber facilities in the delivery configuration.

2.5 Parameter class: 004THREE_PARTY_FACILITIES

Page 19: 10

DN9979835 19

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter classes

Id:0900d8058075d099Confidential

Descriptive NameThree party facilities

DescriptionThis parameter class includes information on the delivery configuration of three party facilities.

2.6 Parameter class: 005OPERATOR_CALL

Descriptive NameOperator call parameters

DescriptionThe class includes technical parameters of operator calls. These parameters are related to time limits, audible tones and queuing parameters of calls.

2.7 Parameter class: 006CALL_TECHNIC_TIM_LIMI

Descriptive NameTime limits

DescriptionThis class includes definitions for call time limits.

2.8 Parameter class: 007CALL_CONTROL

Descriptive NameCall control

DescriptionThis class includes call control definitions.

2.9 Parameter class: 008ACCESS_SERVER

Descriptive NameAccess Server parameters

DescriptionThe parameter class contains parameters related to IP Access Server.

2.10 Parameter class: 009SYSTEM_SUPERVISION

Page 20: 10

20 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d099Confidential

PRFILE and FIFILE parameter classes

Descriptive NameSystem supervision limit values

DescriptionThis class includes limit values related to the monitoring of system functions.

2.11 Parameter class: 010IMPLEMENTA_OF_CALL_CTRL

Descriptive NameImplementation of call control

DescriptionThis class includes implementation values of call control.

2.12 Parameter class: 011SYSTEM_DIMENSIONING

Descriptive NameSystem dimensioning

DescriptionParameters in this class are used to set exchange dimensions that can vary from one delivery to another.

2.13 Parameter class: 012OVERLOAD

Descriptive NameOverload handling

DescriptionThe class includes parameters needed in overload handling.

2.14 Parameter class: 013PRIORITY_CALLS

Descriptive NameParameters of the Priority facility

DescriptionThe class includes the parameters needed in implementing the Priority subscriber facil-ity.

2.15 Parameter class: 014INCOM_CALL_BARRING

Page 21: 10

DN9979835 21

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter classes

Id:0900d8058075d099Confidential

Descriptive NameIncoming Call Barring facility definitions

DescriptionThe parameters of this class define how an incoming call barring category is handled. At least 32 bits are needed for each barring category (3 words because the field value cannot be 0FFFFH). Each bit corresponds to a subscriber class. If the value of the bit corresponding to the A-subscriber class is 0, the call cannot be established. There are three barring categories.

2.16 Parameter class: 015SUBSC_NBR_ANALYSIS

Descriptive NameSubscriber number analysis

DescriptionThis class includes parameters related to the subscriber number analysis.

2.17 Parameter class: 016ALARM_SYSTEM

Descriptive NameAlarm system

DescriptionThis class includes parameters of the alarm system.

2.18 Parameter class: 017CALL_FORWARDING

Descriptive NameCall forwarding

DescriptionThis class includes parameters of call forwarding.

2.19 Parameter class: 018DX_SCP

Descriptive NameParameters for DX-based IN-services

DescriptionAmongst IN-services that are implemented as DX-processes some details are made user-adaptable. These details contain e.g. method codes and number of retrials, which by parameterization can be set delivery specific.

Page 22: 10

22 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d099Confidential

PRFILE and FIFILE parameter classes

2.20 Parameter class: 019WAKE_UP_FACILITY

Descriptive NameWake-up facility

DescriptionThis class includes definitions for the attributes used by the wake-up facility.

2.21 Parameter class: 020CARRIER_ACCESS_CODES

Descriptive NameCarrier access codes

DescriptionThe class includes the carrier access codes identified by the exchange.

2.22 Parameter class: 021COMPLETION_OF_CALL

Descriptive NameCall completion

DescriptionThis class includes parameters for completion of calls.

2.23 Parameter class: 022DX_RF_CODES

Descriptive NameDX RF codes

DescriptionThe class includes parameters for facilities that are implemented using the IN technique.

2.24 Parameter class: 023DN_SIGNAL

Descriptive NameSignalling of DAXnode

DescriptionThis class includes the signalling parameters of the DAXnode.

Page 23: 10

DN9979835 23

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter classes

Id:0900d8058075d099Confidential

2.25 Parameter class: 024V5_INTERFACE

Descriptive NameV5 interface

DescriptionThe class includes parameters of the V5 interface.

2.26 Parameter class: 025DIGITAL_CROSS_CONNECT

Descriptive NameParameters for digital cross-connection

DescriptionThe class includes general parameters for the DX 200 DCS digital cross-connection system.

2.27 Parameter class: 026OWN_ADDR

Descriptive NameOwn address of the exchange

DescriptionThe class includes the parameters that are used to address to the own exchange.

2.28 Parameter class: 027EOS_ATTRIBUTES

Descriptive NameEOS attribute parameters

DescriptionAll EOS attribute parameters are described in this parameter class (FN597).

2.29 Parameter class: 028ROUTING_ATTRIBUTES

Descriptive NameRouting attributes

DescriptionAll attribute parameters of routing are described in this parameter class (FN597).

Page 24: 10

24 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d099Confidential

PRFILE and FIFILE parameter classes

2.30 Parameter class: 029AIF_ATTRIBUTES

Descriptive NameAttributes of A-interface

DescriptionAll attribute parameters of the A-interface are described in this class (FN597).

2.31 Parameter class: 030CHARGING_ATTRIBUTES

Descriptive NameCharging attributes

DescriptionAll attribute parameters for charging are described in this parameter class (FN597).

2.32 Parameter class: 031SHORT_MESSAGE_SERVICE

Descriptive NameShort message service parameters

DescriptionThe short message service parameter class includes special parameters for controlling CP-DATA message resending and short message queueing.

2.33 Parameter class: 032CM_ATTRIBUTE_CONTROL

Descriptive NameControl parameters for central memory attributes

DescriptionThe class includes general control parameters of attribute-directed routing. These parameters are used for adjusting the functionality of attribute-directed routing features.

2.34 Parameter class: 033CM_ATTRIBUTES

Descriptive NameCentral memory attribute types

Page 25: 10

DN9979835 25

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter classes

Id:0900d8058075d099Confidential

DescriptionThe class includes parameters for controlling the visibility of attribute types existing in the exchange. These parameters are used to define the nature of the attribute set used by the customer. All parameters of this class are secret to the customer.

2.35 Parameter class: 034NTN_COMM_OPTIONS

Descriptive NameNTNSYS commercial options

DescriptionThis parameter class includes commercial options of the Nokia Siemens Networks Tetra Network system.

2.36 Parameter class: 035CALL_PARK

Descriptive NameCall park

DescriptionThe class includes parameters of the Centrex feature Call Park.

2.37 Parameter class: 036SUBSC_IDENTIFICATION

Descriptive NameSubscriber identification

DescriptionThe class includes parameters of the features CLIP/CLIR and COLP/COLR.

2.38 Parameter class: 037RADIO_NW_CTRL_REL

Descriptive NameRadio network controlling

DescriptionThe parameter class contains parameters that are used in controlling the functioning of the radio network in BSC, i.e. the minimum attenuation of TX-power in certain frequen-cies.

2.39 Parameter class: 038MML_COMMAND_LOG

Page 26: 10

26 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d099Confidential

PRFILE and FIFILE parameter classes

Descriptive NameMML Command Log parameters

DescriptionThe parameter class includes parameters to define timeout values and disk usage restrictions of the MML Command Log.

2.40 Parameter class: 039CHA_MODIFICATION

Descriptive NameCharging modification parameters

DescriptionParameter class for charging modification attributes (30138).

2.41 Parameter class: 040ECT_PARAMETERS

Descriptive NameExplict Call Transfer parameters

DescriptionThis class contains parameters of the Explicit Call Transfer feature.

2.42 Parameter class: 041CAMEL_PARAMETERS

Descriptive NameCAMEL parameters

DescriptionThis parameter class contains parameters related with CAMEL.

2.43 Parameter class: 042QSIG_PARAMETERS

Descriptive NameQSIG parameters

DescriptionThis parameter class contains parameters related with QSIG.

2.44 Parameter class: 043IWF_CTRL_PARAMETER

Page 27: 10

DN9979835 27

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter classes

Id:0900d8058075d099Confidential

Descriptive NameControl parameters of interworking functions configuration

DescriptionThis parameter class defines the control parameters of the features or functions used by the IWF.

2.45 Parameter class: 044MML_SESSION

Descriptive NameMML Session parameters

DescriptionThis parameter class includes parameters concerning MML session.

2.46 Parameter class: 045NTN_FEATURE_AND_ATTRI

Descriptive NameNTNSYS features and attributes

DescriptionThis parameter class includes some features and attributes of the Nokia Tetra System, e.g. the default routing DXT for the own exchange.

2.47 Parameter class: 046PCU_TELECOM_PARAMETERS

Descriptive NamePCU Telecom Parameters

DescriptionThe parameter class contains parameters related to PCU Telecom.

2.48 Parameter class: 047V5_PSTN_MAPPING_PARAM

Descriptive NameV5 PSTN mapping parameters

DescriptionThe class includes the parameters which determine the operation of the V5 PSTN mapping (PSTN = Public Switched Telephone Network).

Page 28: 10

28 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d099Confidential

PRFILE and FIFILE parameter classes

2.49 Parameter class: 048V5_PSTN_MAPPING_PARAM_2

Descriptive NameAlternative V5 PSTN mapping 2 parameters

DescriptionThe class includes the alternative parameters which determine the operation of the V5 PSTN mapping 2 (PSTN = Public Switched Telephone Network).

2.50 Parameter class: 049GB_INTERFACE

Descriptive NameGb interface parameters in BSC

DescriptionThe parameter class contains parameters related to Gb interface.

2.51 Parameter class: 050REPORT_FORMING

Descriptive NameParameters of Report Forming Service

DescriptionThis parameter class includes parameters concerning Report Forming Service.

2.52 Parameter class: 051AAL2_SIG_PARAMETERS

Descriptive NameAAL type 2 signalling protocol parameter support information

DescriptionThis class contains information of which AAL type 2 signalling protocol parameters are supported.

2.53 Parameter class: 052SIP_SIGNALLING_PARAM

Descriptive NameSIP signalling specific parameters

DescriptionThis parameter class contains the Session Initiation Protocol (RFC 2543) parameters.

Page 29: 10

DN9979835 29

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter classes

Id:0900d8058075d099Confidential

2.54 Parameter class: 053MSC_SERVER_PARAMETERS

Descriptive NameMSC Server specific parameters

DescriptionThe parameter class includes the parameters that are related to the MSC Server func-tionality of the standalone and integrated MSC Servers and Gateway Control Servers (GCS).

2.55 Parameter class: 054TCPIP_PARAMETERS

Descriptive NameTCP/IP parameters

DescriptionParameters related to TCP/IP protocols of DX200/IPA2800 platforms.

2.56 Parameter class: 055LCS_PARAMETERS

Descriptive NameLocation-related parameters

DescriptionThis class includes parameters related to Location Services (LCS).

2.57 Parameter class: 056STLOG_FACILITIES

Descriptive Nameparameters of stlog

DescriptionThe parameter class contains parameters related to collecting of service terminal com-mands.

2.58 Parameter class: 057IIN_ATTRIBUTES

Descriptive NameIIN attribute parameters

DescriptionAll IIN attribute parameters are described in this parameter class (FN1620).

Page 30: 10

30 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d099Confidential

PRFILE and FIFILE parameter classes

2.59 Parameter class: 058OAM_SECURITY

Descriptive NameO&M Security Parameters

DescriptionThis parameter class includes parameters concerning O&M security.

2.60 Parameter class: 059UMA_PARAMS

Descriptive Name2G-SGSN UMA Access related parameters

DescriptionThis parameter class contains parameters related to 2G-SGSN UMA access.

2.61 Parameter class: 060MANAGEMENT_PROTOCOLS

Descriptive NameManagement protocol parameters

DescriptionThis parameter class includes parameters that manage the use of management frag-ments of management protocols.

2.62 Parameter class: 061IN_ATTRIBUTES

Descriptive NameIN attribute parameters

DescriptionThis parameter class includes all IN attribute parameters (FN1620).

2.63 Parameter class: 062OLCM

Descriptive NameInterception related parameters

DescriptionThis parameter class includes all parameters that are related to interception (FN703, FN895, FN1745, SORM, and LAES)

Page 31: 10

DN9979835 31

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter classes

Id:0900d8058075d099Confidential

2.64 Parameter class: 063SIEMENS_INAP

Descriptive NameSiemens_INAP

DescriptionThis parameter class contains the parameters related to Siemens INAP.

2.65 Parameter class: 064SERVICE_ATTRIBUTES

Descriptive NameService attribute parameters

DescriptionThis parameter class includes all Service attribute parameters (FN1841).

2.66 Parameter class: 065MGW_LICENCE_HANDLING

Descriptive NameMGW specific licence handling parameters

DescriptionThe parameter class includes the parameters that are related to the licensed features of the MGW.

2.67 Parameter class: 066WEB_SERVICE_ATTRIBUTES

Descriptive NameWeb Service Attributes

DescriptionThe PRFILE parameter class WEB_SERVICE_ATTRIBUTES is used to store PRFILE parameters related to WEB SERVICE AA.

2.68 Parameter class: 067AUX_PARAMETERS

Descriptive NameAuxiliary parameters

DescriptionThese parameters are planned to be used only in case of urgent PDCs when sack is not available.

Page 32: 10

32 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3 PRFILE and FIFILE parameters

3.1 Parameter class 002 SYSTEM_FUNCT_CONFIGURDescriptive NameSystem functions configuration

DescriptionParameters in this class specify the functional configuration of each delivery, i.e. the functions that are included or excluded.

3.1.1 Parameter 002:0035 PRIMARY_RATE_INTERFACE

Descriptive nameExchange has possibility to primary rate interface connections

ModifiableNO

DescriptionThe parameter determines whether an ISDN primary rate interface can be connected to the network element or not.

Default value(s) G: 00H (FALSE) WX: 0FFH (TRUE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature227 - PRIMARY RATE ACCESS

347 - DPNSS

840 - 23B+D

Value Meaning

TRUE ISDN primary rate interface can be connected to the network element.

FALSE ISDN primary rate interface cannot be connected to the network element.

Page 33: 10

DN9979835 33

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.1.2 Parameter 002:0093 DOUBLE_BA_LIST

Descriptive nameDouble BCCH allocation list

ModifiableON/OFF

DescriptionThis parameter defines that the feature "Double BCCH Allocation List" is available only if the parameter value is PR_OP_T_DOUBLE_DA_LIST_C.

Default value(s)G: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.1.3 Parameter 002:0094 TRANSM_EQ_MML_ENABLE

Descriptive nameBSS Transmission Equipment Handling MML enabling parameter

ModifiableON/OFF

DescriptionThis parameter defines the customer access control to the BSS transmission equipment handling MML (TREHAN).

Default value(s)G: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Page 34: 10

34 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Feature -

3.1.4 Parameter 002:0173 REMOTE_MMI

Descriptive nameRemote MMI flag

ModifiableON/OFF

DescriptionThis parameter defines whether the remote MMI facility is on or off.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.1.5 Parameter 002:0188 T1_ENVIRONMENT

Descriptive nameT1 environment

ModifiableNO

DescriptionWith parameter value TRUE, the system functions in the T1 environment. All ETs have 24 time slots and a capacity of 1.544 Mbit/s.

Default value(s) G: 00H (FALSE)

Value Meaning

PR_OP_T_REMOTE_MMI_TRUE_C facility on

FALSE facility off

Page 35: 10

DN9979835 35

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature907 - MSCandHLR T1 INTERFACE

3.1.6 Parameter 002:0241 Q3_DX_ALARMS_FORW_ON

Descriptive nameQ3 DX alarm forwarding enabled

ModifiableYES

DescriptionThe parameter determines whether the Q3 interface is in use when the alarm events concerning a DX 200 based network element are transmitted to the OMC.

Default value(s)G: 0D D: 1D OX: 1D

Allowed values0D, 1D

Forbidden values

DependenceThe parameter is dependent on feature(s):

170 - CMIS (Q3 INTERFACE)

451 - APPL. FOR CMIS: ALARM INFORMATION TRANSFER

Feature170 - CMIS (Q3 INTERFACE)

Value Meaning

1D The alarm system sends the alarm events of the network element to the EHFRON program block to be forwarded to the Q3 interface.

0D The TXFSEB formats the alarm events into logical file OMCALARM. From the OMCALARM the alarms can be transferred to the OMC by using an OandM connection.

Page 36: 10

36 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

451 - APPL. FOR CMIS: ALARM INFORMATION TRANSFER

3.1.7 Parameter 002:0283 HR_FEATURE_IN_BSC

Descriptive nameHalf Rate feature installed in BSC

ModifiableON/OFF

DescriptionThis parameter defines whether the feature BSS5010 Half Rate is allowed in the BSC or not.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS5010 - HALF RATE

3.1.8 Parameter 002:0361 NORTH_AMERICAN_NUMBER

Descriptive nameNorth American (World Zone 1) numbering

ModifiableYES

DescriptionThe parameter defines whether the North American Numbering is in use.

Value Meaning

TRUE Feature is allowed.

FALSE Feature is not allowed.

Value Meaning

T Numbering is used.

F Numbering is not used.

Page 37: 10

DN9979835 37

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s) G: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature818 - WORLD ZONE 1 EQUAL ACCESS AND NUMBERING PLAN

3.1.9 Parameter 002:0371 AEC_USAGE

Descriptive nameUsage of Acoustic Echo Canceller

ModifiableON/OFF

DescriptionThis parameter defines whether acoustic echo canceller is allowed or not.

Default value(s)G: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS6142 - ACOUSTIC ECHO CANCELLATION

3.1.10 Parameter 002:0372 TFO_USAGE

Descriptive nameUse of Tandem-Free Operation

ModifiableON/OFF

Page 38: 10

38 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionThis parameter defines the tandem-free operation.

Default value(s)G: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS6 -

3.1.11 Parameter 002:0380 ALLOW_OVER_16TRX

Descriptive nameCreating more than 16 TRXs in a BCSU

ModifiableON/OFF

DescriptionThis parameter defines that it is possible to create over 16 TRXs in a BCSU. Note that BSC SW also verifies that the BSC HW is able to handle more than 16 TRXs.

Default value(s)G: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS6009 - LARGE CAPACITY BSC

3.1.12 Parameter 002:0399 THREE_DIGIT_MNC

Descriptive nameThree digit MNC

Page 39: 10

DN9979835 39

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

ModifiableON/OFF

DescriptionThis parameter defines with the parameter value TRUE that the system works in an environment where MNC consists of three digits.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7069 - ---

3.1.13 Parameter 002:0417 FH_IUO_USAGE

Descriptive nameFrequency hopping for intelligent underlay overlay usage.

ModifiableON/OFF

DescriptionThis parameter defines whether the Frequency Hopping for Intelligent Underlay Overlay option is allowed or not in the BSC.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Feature9843 - ---

Page 40: 10

40 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.1.14 Parameter 002:0418 SMSCB_LAST_BLOCK_INFO

Descriptive nameSMS CB last block information used in BSC

ModifiableYES

DescriptionThe parameter defines whether the SMS CB last block information is used or not in the BSC. SMS Short Message Service CB Cell Broadcast Feature number: BSS6084.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS6084 - CELL BROADCAST ENHANCEMENTS

3.1.15 Parameter 002:0444 BTS_HW_DB_Q3_INT_IN_USE

Descriptive nameBTS HW Database Q3 Interface application is in use

ModifiableON/OFF

DescriptionThis parameter defines that events that the BTS HW Database object class emits to the Q3 interface are allowed to be sent to the manager. The Q3 interface is an object-oriented management interface between a network element and a network manage-ment element.

Default value(s)SX:

Allowed valuesTRUE / FALSE

Forbidden values

Page 41: 10

DN9979835 41

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DependenceDependence on other parameters does not exist.

FeatureBSS7001 - ---

3.1.16 Parameter 002:0461 BIN_HEADER_TYPE

Descriptive nameBinary report header type

ModifiableYES

DescriptionThe parameter determines what kind of header is added into binaryreports. The NMS, for example, uses a binary report header for the identification of these reports. If the parameter value is changed, NMS may not recognise the reports.

Default value(s)G: 0D M: 1D S: 1D W1: 1D

Allowed values0D, 1D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature30095 - REPORT FORMING SERVICE

3.1.17 Parameter 002:0466 FLEX_MAIO_USAGE

Descriptive nameFlexible maio management usage.

ModifiableON/OFF

Value Meaning

0D Header is of a shorter format and does not contain block length.

1D Header is of a longer format and contains block length.

Page 42: 10

42 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionThis parameter defines whether the Flexible Maio management option is allowed or not in the BSC.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Feature9807 - FLEXIBLE MAIO MANAGEMENT

3.1.18 Parameter 002:0470 SMSCB_INDEPEN_MULTIPAGE

Descriptive nameSMS CB pages considered independent by the BSC

ModifiableYES

DescriptionThe parameter defines whether the pages of multipage SMS CB message are consid-ered as independent or not by the BSC scheduling algorithm. If the pages are consid-ered as independent it allows another CB message broadcast to the mobile between the pages of a multipage message. SMS Short Message Service CB Cell Broadcast.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7002 - CELL BROADCAST INTERFACE TO CELL BROADCAST CENTRE

Page 43: 10

DN9979835 43

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.1.19 Parameter 002:0500 ALLOW_48_OR_64_TRX

Descriptive nameLarger Capacity BSC: Creation of 48 TRXs (BSCE) and 64 TRXs (BSC2E/A ) in a BCSU

ModifiableON/OFF

DescriptionThis parameter defines that it is possible to create more than 16 TRXs in a BCSU. The maximum TRX number in a BCSU depends on the BSC type. With the BSCE the maximum number is 48 TRXs in a BCSU and with the BSC2E/A it is 64 TRXs in a BCSU.

Default value(s)G: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS8129 - LARGER CAPACITY BSC

3.1.20 Parameter 002:0511 ABIS_AUTOCONF_IN_USE

Descriptive nameBSC Support for Autoconfiguration: Abis autoconfiguration in use

ModifiableNO

DescriptionThe parameter defines whether the operator has the abis autoconfiguration feature in use. If the value is TRUE, operator has the abis autoconfiguration feature in use in the BSC.

Default value(s)SX: FALSE

Allowed valuesFALSE / PR_OP_T_AUTOCONF_IN_USE_C

Forbidden values

Page 44: 10

44 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DependenceDependence on other parameters does not exist.

FeatureBSS8125 - BSC SUPPORT FOR AUTOCONFIGURATION

3.1.21 Parameter 002:0558 MS_CAP_IND_USAGE

Descriptive nameAuthorisation of the use of the MS Capability Indication measurement

ModifiableON/OFF

DescriptionThis parameter defines whether use of the MS Capability Indication measurement is allowed or not in the BSC.

Default value(s): FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9018 - MS CAPABILITY INDICATION

3.1.22 Parameter 002:0602 TRE_SW_DL_MC_ADDRESS

Descriptive nameTransmission equipment software download multicast address

ModifiableYES

Value Meaning

TRUE Use of MS Capability Indication measurement is allowed

FALSE Use of MS Capability Indication measurement is not allowed

Page 45: 10

DN9979835 45

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThe parameter defines the Q1 implemented transmission equipment multicast address which is used when transmission equipment software is downloaded with multicast mode.

Default value(s)SX: 4050D

Allowed values4050D-4059D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9023 - SW DL SUPPORT FOR METROSITE TRANSMISSION EQUIPMENT

3.1.23 Parameter 002:0623 NOISE_SUPPRESSION_USAGE

Descriptive nameNoise Suppression, use of

ModifiableON/OFF

DescriptionThis parameter defines whether noise suppression is allowed or not.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9069 - NOISE SUPPRESSION

3.1.24 Parameter 002:0626 DAC_USAGE

Descriptive nameDefined Adjacent Cell measurement, use of

Page 46: 10

46 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableON/OFF

DescriptionThe parameter determines whether use of the optional Defined Adjacent Cell measure-ment is allowed in the BSS or not. If the customer has the feature, he can activate or deactivate it by changing the parameter value. Possible values are ON and OFF.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10072 - AUTOMATED FREQUENCY PLANNING

3.1.25 Parameter 002:0628 FER_USAGE

Descriptive nameFER measurement

ModifiableON/OFF

DescriptionThe parameter determines whether use of the optional FER measurement is allowed in the BSS or not. If the customer has the feature, he can activate/deactivate it by changing the parameter value, the possible values are ON/OFF.

Default value(s)SX: FALSE

Value Meaning

ON The Defined Adjacent Cell Measurement feature is active.

OFF The Defined Adjacent Cell Measurement is inactive. If the customer has bought the feature, this is the default value.

Value Meaning

ON The FER measurement feature is active.

OFF The FER measurement feature is inactive. If the customer has bought the feature, this is the default value.

Page 47: 10

DN9979835 47

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10022 - FER MEASUREMENT

3.1.26 Parameter 002:0643 REV_HUNT_USED

Descriptive nameReversed hunting

ModifiableON/OFF

DescriptionThe parameter determines whether the optional feature Reversed hunting is allowed in the BSS or not. If the customer has the feature, it can be activated or deactivated by changing the value of the parameter. Possible values are ON and OFF.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10005 - REVERSED HUNTING

3.1.27 Parameter 002:0644 DYN_ABIS_IN_USE

Descriptive nameDynamic Abis allocation in use

Value Meaning

ON The Reversed hunting feature is active.

OFF The Reversed hunting feature is inactive. This is the default value.

Page 48: 10

48 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableON/OFF

DescriptionThis parameter defines whether the dynamic Abis feature is in use or not in the BSC.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10045 - DYNAMIC ABIS

3.1.28 Parameter 002:0654 PBS_USAGE

Descriptive namePosition Based Services

ModifiableON/OFF

DescriptionThe Position Based Services feature is for locating valid mobile equipment. The param-eter determines whether use of the optional Position Base Services is allowed in the BSS or not. Possible values are ON and OFF.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Value Meaning

PR_OP_T_DYN_ABIS_IN_USE_C The feature is in use.

FALSE The feature is not in use.

Value Meaning

ON Position Based Services is activated.

OFF Position Based Services is deactivated. This is the default value.

Page 49: 10

DN9979835 49

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10012 - POSITION BASED SERVICES (PBS) IN BSC

3.1.29 Parameter 002:0664 COMMON_BCCH_EGSM900

Descriptive nameCOMMON BCCH EGSM900

ModifiableON/OFF

DescriptionThis parameter defines whether SEG can have TRXs from the EGSM900 band or not.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10016 - COMMON BCCH and MULTI BCF

3.1.30 Parameter 002:0665 SEGMENT_USAGE

Descriptive nameSEGMENT USAGE

ModifiableON/OFF

Value Meaning

TRUE A cell can have TRXs from the EGSM900 band. So a SEG object can include BTS objects from the EGSM900 band.

FALSE A cell cannot have TRXs from the EGSM900 band.

Page 50: 10

50 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionThis parameter defines whether SEG is shown to the user or not.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10016 - COMMON BCCH and MULTI BCF

3.1.31 Parameter 002:0666 COMMON_BCCH_GSM900

Descriptive nameCOMMON BCCH GSM900

ModifiableON/OFF

DescriptionThis parameter defines whether SEG can have TRXs from the GSM900 band or not.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

Value Meaning

TRUE SEG is shown to the user.

FALSE SEG is not shown to the user.

Value Meaning

TRUE A cell can have TRXs from the PGSM900 band. So a SEG object can include BTS objects from the GSM900 band.

FALSE A cell cannot have TRXs from the PGSM900 band.

Page 51: 10

DN9979835 51

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DependenceDependence on other parameters does not exist.

FeatureBSS10016 - COMMON BCCH

3.1.32 Parameter 002:0667 COMMON_BCCH_GSM1800

Descriptive nameCOMMON BCCH GSM1800

ModifiableON/OFF

DescriptionThis parameter defines whether SEG can have TRXs from the GSM1800 band or not.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10016 - COMMON BCCH

3.1.33 Parameter 002:0668 MULTI_BCF

Descriptive nameMULTI BCF

ModifiableON/OFF

DescriptionThis parameter defines whether a cell can have TRXs from different base stations (BCF objects).

Value Meaning

TRUE A cell can have TRXs from the GSM1800 band. So a SEG object can include BTS objects from the GSM1800 band.

FALSE A cell cannot have TRXs from the GSM1800 band.

Page 52: 10

52 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10046 - MULTI BCF

3.1.34 Parameter 002:0693 FIRST_FREE_NUMBERED_CGR

Descriptive nameFirst allowed circuit group number for free numbered circuit groups.

ModifiableYES

DescriptionThe parameter defines the first allowed circuit group number for circuit groups to which system allocates circuit group numbers.

Default value(s)GX: 1D SX: 300D

Allowed values1D - 2048D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature30581 - ROUTING ARCHITECTURE

Value Meaning

TRUE A cell can have TRXs from different base stations. So a SEG object can include BTS objects of different base stations (BCF objects).

FALSE A cell cannot have TRXs from different base stations. So a SEG object cannot include BTS objects of differ-ent base stations (BCF objects).

Page 53: 10

DN9979835 53

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.1.35 Parameter 002:0701 S9_LOCATION_SYSTEM

Descriptive nameCell ID, TA and RxLevel delivery to Standalone SMLC

ModifiableON/OFF

DescriptionThe parameter determines whether use of the optional Cell ID, TA and RxLevel to S/O SMLC(Serving Mobile Location Center) is allowed in the BSS or not. If the customer has the feature, he can activate/deactivate it by changing the parameter value. Possible values are ON/OFF.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9089 - BSC SUPPORT FOR MCATCH 1.0 AND 1.5

3.1.36 Parameter 002:0702 TTY_USAGE

Descriptive nameText Telephone (TTY)

ModifiableON/OFF

DescriptionThe parameter defines whether Text Telephone (TTY) support is enabled or not. If TTY support is enabled Cellular Text Telephone Modem (CTM) is used in the Transcoder Submultiplexer (TCSM2).

Default value(s)SX: FALSE

Value Meaning

ON Cell ID, TA and RxLevel delivery service is activated

OFF Cell ID, TA and RxLevel delivery service is deactivated_ this is the default value

Page 54: 10

54 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10112 - TEXT TELEPHONY (TTY) FOR US MARKETS

3.1.37 Parameter 002:0711 NEMU_IS_PRESENT

Descriptive nameNEMU is present in the network element

ModifiableYES

DescriptionWhen the parameter value is T (True, 1), NEMU unit is present in the network element.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature30881 - EXTERNAL MESSAGE TRANSFER

3.1.38 Parameter 002:0733 COMMON_BCCH_GSM800

Descriptive nameCOMMON BCCH GSM800

ModifiableON/OFF

Value Meaning

0 NEMU is not present in Network Element

1 NEMUis present in Network Element

Page 55: 10

DN9979835 55

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThis parameter defines whether the Common BCCH Segment can have TRXs from the GSM800 band or not.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10118 - COMMON BCCH FOR GSM800/GSM1900

3.1.39 Parameter 002:0734 COMMON_BCCH_GSM1900

Descriptive nameCOMMON BCCH GSM1900

ModifiableON/OFF

DescriptionThis parameter defines whether the Common BCCH Segment can have TRXs from the GSM1900 band or not.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Value Meaning

TRUE A cell can have TRXs from the GSM800 band. So a SEG object can include BTS objects from the GSM800 band.

FALSE A cell cannot have TRXs from the GSM800 band.

Value Meaning

TRUE A cell can have TRXs from the GSM1900 band. So a SEG object can include BTS objects from the GSM1900 band.

FALSE A cell cannot have TRXs from the GSM1900 band.

Page 56: 10

56 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10118 - COMMON BCCH FOR GSM800/GSM1900

3.1.40 Parameter 002:0737 GSM800_1900_USAGE

Descriptive nameDual Band for GSM800/GSM1900 usage

ModifiableON/OFF

DescriptionThis parameter defines the optionality of the Dual Band for GSM800/GSM1900 feature.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10118 - DUAL BAND FOR GSM800/GSM1900

3.1.41 Parameter 002:0738 GSM800_1800_USAGE

Descriptive nameDual Band for GSM800/GSM1800 usage

ModifiableON/OFF

Value Meaning

TRUE The Dual Band for GSM800/GSM1900 is activated. The BSC is able to manage cells from GSM800 and GSM1900 bands.

FALSE The Dual Band for GSM800/GSM1900 is not activated. This is the default value.

Page 57: 10

DN9979835 57

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThis parameter defines the optionality of the Dual Band for GSM800/GSM1800 feature.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11116 - DUAL BAND FOR GSM800/GSM1800

3.1.42 Parameter 002:0739 ISHO_SUPPORT_IN_BSC

Descriptive nameInter-System HO support in BSC

ModifiableON/OFF

DescriptionThis parameter defines whether neighbour WCDMA RAN cells can be defined and used for a serving GSM cell or not.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Value Meaning

TRUE The Dual Band for GSM800/GSM1800 is activated. The BSC is able to manage cells from GSM800 and GSM1800 bands.

FALSE The Dual Band for GSM800/GSM1800 is not activated. This is the default value.

Value Meaning

TRUE Neighbour WCDMA RAN cells can be defined for serving GSM cells.

FALSE Neighbour WCDMA RAN cells cannot be defined for a serving GSM cell in the BSC, nor is any data of UADJCs sent in system information messages.

Page 58: 10

58 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10101 - INTER-SYSTEM HANDOVER

3.1.43 Parameter 002:0749 LB_USAGE

Descriptive namePosition Based Services

ModifiableON/OFF

DescriptionThe Position Based Services feature is for locating valid mobile equipment. The param-eter determines whether use of the optional Lb usage is allowed in the BSS or not. Possible values are ON and OFF.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11114 -

3.1.44 Parameter 002:0750 LB_PLUS

Descriptive namePosition Based Services

ModifiableON/OFF

Value Meaning

ON Lb usage is activated.

OFF Lb usage is deactivated. This is the default value.

Page 59: 10

DN9979835 59

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionLB+ allows or disables access to RNW DB if PBS_USAGE is deactivated. The param-eter determines whether use of the optional LB+ is allowed in the BSS or not. Possible values are ON and OFF.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11114 -

3.1.45 Parameter 002:0764 CITARX_USAGE

Descriptive nameCITARX usage

ModifiableON/OFF

DescriptionThis parameter indicates to the BSC integrated SMLC that if the CITARX position cal-culation method can be used. Possible values are TRUE and FALSE.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

Value Meaning

ON LB+ is activated.

OFF LB+ is deactivated. This is the default value.

Value Meaning

TRUE CITARX calculation method is activated and it can be used.

FALSE CITARX calculation method is deactivated and it can not be used. This is the default value.

Page 60: 10

60 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DependenceDependence on other parameters does not exist.

FeatureBSS20070 - BSC Integrated SMLC Enhancement

3.1.46 Parameter 002:0776 EMR_SUPPORT_IN_BSC

Descriptive nameSupport for Enhanced Measurement Report

ModifiableON/OFF

DescriptionThis parameter defines whether or not the Support for Enhanced Measurement Report is in use in the BSC.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11086 - SUPPORT FOR ENHANCED MEASUREMENT REPORT

3.1.47 Parameter 002:0790 HW_INVENTORY_IN_USE

Descriptive nameHW Inventory ON/OFF

ModifiableYES

Value Meaning

TRUE Support for Enhanced Measurement Report is in use in the BSC.

FALSE Support for Enhanced Measurement Report is not in use in the BSC.

Page 61: 10

DN9979835 61

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionHW Inventory feature can be switched ON/OFF by this parameter. The HW Inventory feature is OFF by default.

Default value(s) GX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.1.48 Parameter 002:0809 ANTENNA_HOPPING_USAGE

Descriptive nameAntenna hopping for UltraSite

ModifiableON/OFF

DescriptionThe parameter defines whether or not the Antenna hopping for UltraSite is in use in the BSC.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11134 - ANTENNA HOPPING FOR ULTRASITE BTS

Value Meaning

TRUE Antenna hopping for UltraSite is in use in the BSC.

FALSE Antenna hopping for UltraSite is not in use in the BSC.

Page 62: 10

62 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.1.49 Parameter 002:0814 Q3_IN_USE

Descriptive nameQ3 Interface in Use

ModifiableYES

DescriptionThe parameter defines whether or not the events occurring in the network element (NE) are converted into Q3 notifications as they occur.

Default value(s) GX: 1 (T)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature10184 -

3.1.50 Parameter 002:0820 TOTAL_FEP_USAGE

Descriptive nameTotal FEP usage

ModifiableON/OFF

DescriptionThis parameter defines if the optional feature Total FEP is included in the BSC software or not.

Value Meaning

1 The events occurring in the NE are converted into Q3 notifications.

0 The events occurring in the NE are not converted into Q3 notifications.

Value Meaning

TRUE The total FEP feature is included in the BSC software.

FALSE The total FEP feature is not included in the BSC software.

Page 63: 10

DN9979835 63

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11085 - AUTOMATED PLANNING ENHANCEMENTS

3.1.51 Parameter 002:0829 LB_STACK_IN_BCSU

Descriptive namePosition Based Services

ModifiableON/OFF

DescriptionThe parameter defines if the SCCP/M3UA/SCTP/IP/Ethernet is located in the MCMU or in the BCSU. Possible values are TRUE and FALSE.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11114 -

Value Meaning

TRUE The Lb interface protocol stack is in the BCSU.

FALSE The Lb interface protocol stack is in the MCMU.

Page 64: 10

64 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.1.52 Parameter 002:0839 BTS_METRO_SITE_BATBU_PR

Descriptive nameIntelligent Shutdown for MetroSite BTS

ModifiableON/OFF

DescriptionThe parameter defines whether or not the Intelligent Shutdown for MetroSite BTS is in use in the BSC.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11047 - INTELLIGENT SHUTDOWN FOR ULTRASITE AND METROSITE BTS -FEATURE ACTIVATION

3.1.53 Parameter 002:0843 BTS_ULTRA_SITE_BATBU_PR

Descriptive nameIntelligent Shutdown for UltraSite BTS

ModifiableON/OFF

DescriptionThe parameter defines whether or not the Intelligent Shutdown for UltraSite BTS is in use in the BSC.

Value Meaning

TRUE The Intelligent Shutdown for MetroSite BTS is in use in the BSC.

FALSE The Intelligent Shutdown for MetroSite BTS is not in use in the BSC.

Value Meaning

TRUE The Intelligent Shutdown for UltraSite BTS is in use in the BSC.

Page 65: 10

DN9979835 65

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Featurebss11047 - INTELLIGENT SHUTDOWN FOR ULTRASITE AND METROSITE BTS -FEATURE ACTIVATION

3.1.54 Parameter 002:0857 CHILD_CELL_BAR

Descriptive nameChild Cell Barred Check

ModifiableON/OFF

DescriptionThe parameter determines whether the Intelligent Underlay Overlay child cells are allowed without cell barring.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FALSE The Intelligent Shutdown for UltraSite BTS is not in use in the BSC.

Value Meaning

Value Meaning

FALSE The child cells need cell barring.

TRUE The child cells are allowed without cell barring.

Page 66: 10

66 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

FeatureBSC4016 - Intelligent Underlay-Overlay

3.1.55 Parameter 002:0899 EXT_UTBF_USAGE

Descriptive nameExtended uplink TBF mode feature usage

ModifiableON/OFF

DescriptionThis parameter defines whether the extended uplink TBF mode feature is in use in the BSC or not.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11151 - Extended uplink TBF mode

3.1.56 Parameter 002:0905 UTDOA_SUPPORT

Descriptive nameSupport for the UTDOA system

ModifiableON/OFF

DescriptionThis parameter defines if the U-TDOA (Uplink Time Difference of Arrival) positioning method is on or off in the BSC.

Default value(s)SX: FALSE

Value Meaning

ON UTDOA_SUPPORT is activated.

OFF UTDOA_SUPPORT is deactivated (default).

Page 67: 10

DN9979835 67

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11155 - Support for U-TDOA system

3.1.57 Parameter 002:0921 HW_CHANGE_NOTIF_IN_USE

Descriptive nameEquipment database change notifications ON/OFF

ModifiableYES

DescriptionThis parameter determines whether the change notifications from the changes made in equipment database (EQUIPM) are switched ON or OFF.

Default value(s) GX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on parameter(s):

002:0790

Feature31344 - HW inventory

3.1.58 Parameter 002:0947 BSR_SUPPORT_IN_BSC

Descriptive nameBSR Usage

Value Meaning

FALSE The parameter is OFF. This is the default value.

Page 68: 10

68 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableON/OFF

DescriptionThis parameter defines if the optional feature BSR Support in BSC is included in the BSC software or not.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.1.59 Parameter 002:1006 UTDOA_COMMERCIAL

Descriptive nameSupport for the commercial location request in UTDOA system

ModifiableON/OFF

DescriptionThis parameter defines if commercial location request support is on or off for U-TDOA (Uplink Time Difference of Arrival) positioning method in BSC.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Value Meaning

TRUE The BSR Support in BSC is included in the BSC software.

FALSE The BSR Support in BSC is not included in the BSC soft-ware.

Value Meaning

ON UTDOA_COMMERCIAL is activated.

OFF UTDOA_COMMERCIAL is deactivated (default).

Page 69: 10

DN9979835 69

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11155 - Support for U-TDOA System

3.1.60 Parameter 002:1114 EQOS_TESTING_MODE

Descriptive nameAllowing configure PCU2 with EQoS enabled in a same track with PCUs.

ModifiableON/OFF

DescriptionThis parameter defines that is it allowed to configure PCU2 with EQoS enabled in a same track with PCUs for testing and trialing purposes. For example, trialing and testing new features with buying single PCU2, testing of corrections; the customer can test cor-rections with a single PCU. The meaning of the parameter: - if EQOS_TESTING_MODE = ON, then a single PCU2 will have EQOS active if EQOS was enabled. - EQOS_TESTING_MODE = OFF, then EQOS is active in PCU2s in a track where there was all BCSUs equipped with PCU2s.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

Value Meaning

FALSE If this parameter is false, all PCUs in same track has to be PCU2, before EQoS enabled information is sent to PCU.

TRUE If this parameter is true, EQoS enabled information is allways sent to PCU.

Page 70: 10

70 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.1.61 Parameter 002:1120 LAN_ADMINISTRATION

Descriptive nameIntegrated LAN Administration feature activation

ModifiableYES

DescriptionThe parameter determines the usage of the feature LAN Device Integration.

Default value(s) GX: 1 (T)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature31500 - LAN Device Integration

3.1.62 Parameter 002:1167 COMBI_CONF_ALLOWED

Descriptive nameCombi BSC3i/TCSM3i configuration allowed

ModifiableYES

DescriptionTCSM3i for combined BSC/TCSM installation can be configured into this BSC.

Default value(s) SX: 0 (F) 2X: 0 (F) 4X: 0 (F) WX: 0 (F) JX: 0 (F)

Value Meaning

T TRUE Feature is in use.

F FALSE Feature is not in use.

Value Meaning

1 Allowed

0 Not allowed

Page 71: 10

DN9979835 71

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature31446 - OC-3/T1 Tributary Interface

3.1.63 Parameter 002:1264 EMR_RESTRICTED

Descriptive nameEMR activation restricted in BSC

ModifiableON/OFF

DescriptionThis parameter defines whether the activation of EMR feature is restricted in the BSC or not. When EMR_RESTRICTED is true the EMR feature is activated in BSC only for phones that support either UMTS FDD or the GERAN feature package 1 (or both). When EMR_RESTRICTED is false there are no restrictions in EMR activation.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.1.64 Parameter 002:1475 RNW_OM_LOG_USAGE

Descriptive nameAutomated RNW O&M log collection feature control usage

ModifiableON/OFF

Page 72: 10

72 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionWith this parameter you can activate/deactivate the automated log collection feature.

Default value(s)SX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20097 - Automated RNW O&M log collection

3.1.65 Parameter 002:1500 BSC_PCMMAP_PATH_CTRL

Descriptive namePCM transfer selection path for BSC3i upgrade

ModifiableYES

DescriptionThis parameter defines the conversion path along which the PCM is transferred in the GSW when the BSC3i upgrade is done.

Value Meaning

FALSE The automated log collection feature is deactive.

TRUE The automated log collection feature is active.

Value Meaning

0x1 BSC3i 660 (GSWB) --> BSC3i 660 (GSW1KB)

0x2 BSC3i 660 (GSWB) upgrade to BSC3i 1000 (GSW2KB)

0x3 BSC3i 660 (GSW1KB) upgrade to BSC3i 1000 (GSW2KB)

0x4 BSC3i 1000 -> Flexi BSC

0x5 Combined BSC/TCSM installation, where the BSC part is BSC3i 1000 (1 TCSA cap) -> Combined BSC/TCSM installation evo-lution (3 TCSA cab), where the BSC part is BSC3i 1000

Page 73: 10

DN9979835 73

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)GX: 0H SX: 0H

Allowed values0 - 0xF

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.1.66 Parameter 002:1521 DUPU_WITH_CDPC

Descriptive nameDUPU SSNM message extended with concerned DPC field

ModifiableON/OFF

DescriptionThe parameter determines whether the DUPU message contains the concerned DPC field or not. If IPSEP does not initiate DUPU message, the originating point code does not know that the user part is unavailable, and keeps sending message to this point code, causing operation failure or call loss. If DUPU is sent with the concerned destina-tion parameter field, signalling monitoring system can locate the problem on time.

Default value(s)GX: FALSE

Allowed valuesTRUE / FALSE

0x6 Combined BSC/TCSM installation (TCSA,0), where the BSC part is BSC3i 1000 -> Combined BSC/TCSM installa-tion, where the BSC part is Flexi BSC

Value Meaning

Value Meaning

TRUE DUPU message with concerned DPC field (TAG 206).

FALSE DUPU message without concerned DPC field (TAG 206).

Table 1

Page 74: 10

74 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Forbidden values

DependenceDependence on other parameters does not exist.

Feature50035 - SS7 MTP3-User Adaptation Layer (M3UA)

3.1.67 Parameter 002:1554 SEL_OCTFIL_VARIANT_TO

Descriptive nameSELECT OCTFIL VARIANT TO USE

ModifiableYES

DescriptionThe parameter determines the OCTFIL variant to be used in the network element. The default value is zero and it means that the base variant of OCTFIL_FN file is used.

Default value(s)JX: 0H 2X: 0H JX: 0H 4X: 0H WX: 0H

Allowed values0 and 1

Forbidden values>2

DependenceDependence on other parameters does not exist.

Feature31446 - OC-3 tributary interface

3.1.68 Parameter 002:1587 HW_AUTOMATIC_CMP_IN_USE

Descriptive nameAutomatic comparison ON/OFF

ModifiableYES

Value Meaning

0 OCTFILSX, OCTFILJX, OCTFILMX, OCT-FILGX, OCTFILWX, OCTFILW2.

1 OCTFILSU used in new S14 HW, OCTFILJU used in SG7 HW.

Page 75: 10

DN9979835 75

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThis parameter is used to switch ON/OFF the automatic comparison between physical hardware and hardware description in equipment database (EQUIPM).

Default value(s)GX: 0FFH (TRUE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on parameter(s):

002:0790

Feature31344 - HW inventory

3.1.69 Parameter 002:1588 HW_MISMATCH_ALD_IN_USE

Descriptive nameEnable/Disable the alarm HW_AND_DB_CONF_MISMATCH_A

ModifiableYES

DescriptionThis parameter is used to enable/disable the alarm (HW_AND_DB_CONF_MISMATCH_A) related to the mismatches between physical hardware and hardware description in equipment database (EQUIPM).

Default value(s)GX: 0FFH (TRUE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Value Meaning

TRUE The parameter is ON. This is the default value.

Table 2

Value Meaning

TRUE The parameter is ON. This is the default value.

Table 3

Page 76: 10

76 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Forbidden values

DependenceThe parameter is dependent on parameter(s):

002:0790

Feature31344 - HW inventory

3.1.70 Parameter 002:1705 MAX_WAIT_TIME_BSC_RST

Descriptive nameMAXIMUM WAITING TIME FOR BSC RESET COMMAND

ModifiableNO

DescriptionThis parameter determines the maximum waiting time to get all Fast BSS restart feature supporting BTSs informed about coming BSC restart. The MMI will stay reserved during the waiting time, after "BSC restart without RNW reset" command is given. The used time unit is minute. The parameter is not modifiable by the User.

Default value(s)SX: 03H

Allowed values1-5

Increments1

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS21362 - Fast BSS Restart

3.1.71 Parameter 002:1829 LOW_OVERLOAD_LIMIT

Descriptive nameLow Overload Limit

ModifiableNO

Page 77: 10

DN9979835 77

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThis is used by ETP to configure Low Overload Threshold parameter. The value is per-centage. New value will be provided to ETPA/C during ETPC/A restart and with AoIP related BSC parameter modification.

Default value(s)SX: 60D

Allowed values0D-100D

Increments1

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS21341 - A Over IP

3.1.72 Parameter 002:1830 HIGH_OVERLOAD_LIMIT

Descriptive nameHigh Overload Limit

ModifiableNO

DescriptionThis is used by ETP to configure High Overload Threshold parameter. The value is per-centage. New value will be provided to ETPA/C during ETPA/C restart and with AoIP related BSC parameter modification.

Default value(s)SX: 70D

Allowed values0D-100D

Increments1

Forbidden values

DependenceDependence on other parameters does not exist.

Page 78: 10

78 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

FeatureBSS21341 - A Over IP

3.1.73 Parameter 002:1831 CRIT_OVERLOAD_LIMIT

Descriptive nameCritical Overload Limit

ModifiableNO

DescriptionThis is used by ETP to configure Critical Overload Threshold parameter. The value is percentage. New value will be provided to ETPA/C during ETPA/C restart and with AoIP related BSC parameter modification.

Default value(s)SX: 80D

Allowed values0D-100D

Increments1

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS21341 - A Over IP

3.1.74 Parameter 002:1832 LOAD_HYSTERESIS

Descriptive nameLoad Hysteresis

ModifiableNO

DescriptionThis is used by ETP to configure Load Hysteresis parameter. The value is percentage. New value will be provided to ETPA/C during ETPA/C restart and with AoIP related BSC parameter modification.

Default value(s)SX: 5D

Page 79: 10

DN9979835 79

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Allowed values0D-10D

Increments1

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS21341 - A Over IP

3.1.75 Parameter 002:1833 TIME_HYSTERESIS

Descriptive nameTime Hysteresis

ModifiableNO

DescriptionThis is used by ETP to configure Time Hysteresis parameter. The value is in seconds. New value will be provided to ETPA/C during ETPA/C restart and with AoIP related BSC parameter modification.

Default value(s)SX: 10D

Allowed values0D-30D

Increments1

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS21341 - A Over IP

3.1.76 Parameter 002:1870 BASE_RTP_PORT_ETPA

Descriptive nameBase RTP port ETPA

Page 80: 10

80 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableYES

DescriptionThe range of UDP ports that shall be used for CS U-Plane RTP traffic when AoIP is used shall be configurable using this parameter. Only even numbers are allowed as value for this parameter. New value will be provided to ETPA during ETPA restart only.

Default value(s)SX: 49152D

Allowed values49152 - 49535

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS21341 - A Over IP

3.1.77 Parameter 002:1871 BASE_RTP_PORT_ETPC

Descriptive nameBase RTP port ETPC

ModifiableYES

DescriptionThe range of UDP ports that shall be used for CS U-Plane RTP traffic when AoIP is used shall be configurable using this parameter. Only even numbers are allowed as value for this parameter New value will be provided to ETPC during ETPC restart only.

Default value(s)SX: 57344D

Allowed values57344 - 57535

Increments2

Forbidden values

Page 81: 10

DN9979835 81

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DependenceDependence on other parameters does not exist.

FeatureBSS21341 - A Over IP

3.1.78 Parameter 002:1872 PKT_DELAY_VAR

Descriptive namePacket Delay Variation

ModifiableYES

DescriptionPacket Delay Variation parameter is used by ETP-C for creating de-jitter buffering. Value is indicated in msec. New value will be provided to ETPC during ETPC restart and with AoIP related BSC parameter modification.

Default value(s)SX: 0D

Allowed values0 - 50

Increments1

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS21341 - A Over IP

3.1.79 Parameter 002:1873 CS_CALL_LENGTH

Descriptive nameCS Call Length

ModifiableYES

DescriptionETPA shall monitor call which are longer than this parameter for detecting hanging calls. The call duration is indicated in minutes. New value will be provided to ETPA during ETPA restart and with AoIP related BSC parameter modification.

Page 82: 10

82 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s)SX: 180D

Allowed values0-180

Increments1

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS21341 - A Over IP

3.1.80 Parameter 002:2035 LOW_OVERLOAD_LIMIT_ETPC

Descriptive nameLow Overload Limit ETPC

ModifiableNo

DescriptionThis is used by ETPC to configure Low Overload Threshold parameter. Value is percent-age.

Default value(s)SX: 95D

Allowed values0D-100D

Increments1

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS21341 - A Over IP

Page 83: 10

DN9979835 83

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.1.81 Parameter 002:2036 HIGH_OVRLOAD_LMT_ETPC

Descriptive nameHigh Overload Limit ETPC

ModifiableNo

DescriptionThis is used by ETPC to configure High Overload Threshold parameter. Value is per-centage.

Default value(s)SX: 97D

Allowed values0D-100D

Increments1

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS21341 - A Over IP

3.1.82 Parameter 002:2037 CRIT_OVRLOAD_LMT_ETPC

Descriptive nameCritical Overload Limit ETPC

ModifiableNo

DescriptionThis is used by ETPC to configure Critical Overload Threshold parameter. Value is per-centage.

Default value(s)SX: 99D

Allowed values0D-100D

Increments1

Page 84: 10

84 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS21341 - A Over IP

3.2 Parameter class 009 SYSTEM_SUPERVISIONDescriptive NameSystem supervision limit values

DescriptionThis class includes limit values related to the monitoring of system functions.

3.2.1 Parameter 009:0008 LOAD_RATE_SAMPLE_INTERV

Descriptive nameProcessor load rate measurement interval

ModifiableYES

DescriptionThe parameter defines the time interval after which the Processor Load Observation Program Block (LRMPRO) reads its own computer processor load. The time is given in seconds. The parameter affects concurrently all computer units where the LRMPRO is running.

Default value(s)G: 04H

Allowed values04H - 012CH

Forbidden values

DependenceDependence on other parameters does not exist.

Feature71 - PERFORMANCE MANAGEMENT: LOAD OBSERVATION

Page 85: 10

DN9979835 85

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.2.2 Parameter 009:0010 CRC4_TRH_FOR_DEGRAD_MIN

Descriptive nameThreshold value for degraded minutes

ModifiableNO

DescriptionThe parameter indicates the threshold value of CRC4 errors for degraded minutes (TRH 2). CRC4_TRH_FOR_ERRORE_SEC parameter (009:0011) defines the threshold value for seconds.

Default value(s)G: 123D

Allowed values

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.2.3 Parameter 009:0011 CRC4_TRH_FOR_ERRORE_SEC

Descriptive nameThreshold value for errored seconds

ModifiableNO

DescriptionThe parameter indicates the threshold value of CRC4-errors for severely errored seconds (TRH 1). CRC4_TRH_FOR_DEGRAD_MIN parameter (009:0010) defines the threshold value for minutes.

Default value(s)G: 871D

Allowed values

Forbidden values

Page 86: 10

86 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DependenceDependence on other parameters does not exist.

Feature -

3.2.4 Parameter 009:0028 SEC_EVENT_ALARM_LIMIT

Descriptive nameSecurity event alarm limit

ModifiableYES

DescriptionThe parameter defines the alarm limit in per cents of the filling ratio of the Security Reporting Transaction Data File (LETTER). If the number of security events during the monitoring period (defined in the SEC_EVENT_MON_PERIOD parameter (009:0029)) has reached the alarm limit, the security reporting program block gives an alarm.

Default value(s)G: 70D

Allowed values1D - 100D

Forbidden values0D, 101D - 65534D

DependenceDependence on other parameters does not exist.

Feature218 - SECURITY REPORTING

3.2.5 Parameter 009:0029 SEC_EVENT_MON_PERIOD

Descriptive nameMonitoring period for number of security events

ModifiableYES

DescriptionThe parameter defines the monitoring period in days. If the number of security events in the Security Reporting Event Data File (LETTER) reaches the alarm limit (defined in the SEC_EVENT_ALARM_LIMIT parameter (009:0028)) during the monitoring period, the security reporting program block gives an alarm.

Page 87: 10

DN9979835 87

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)G: 7D

Allowed values1D - 65534D

Forbidden values0D

DependenceDependence on other parameters does not exist.

Feature218 - SECURITY REPORTING

3.2.6 Parameter 009:0037 BTS_SITE_BATBU_PROC

Descriptive nameBTS site battery backup procedure

ModifiableYES

DescriptionThe parameter is a BSC-specific parameter that defines whether the BTS site battery backup procedure is in use or not.

Default value(s) SX: 0FFH (TRUE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

Feature -

3.2.7 Parameter 009:0044 EXCL_EST_CAUSES_HO_REF

Descriptive nameExclusion of establishment cause values from handover reference.

ModifiableYES

Page 88: 10

88 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionWhen this parameter is set to True the handover reference will be formed in such a way that it will not include any values which could be interpreted as valid establishment causes if the handover access burst is overheard to another cell as a random access burst. For this overhearing to take place the BSIC values and the frequencies have to be the same in these two cells.

Default value(s) SX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature- -

3.2.8 Parameter 009:0049 BITMAP_CHECK_RECORDS

Descriptive nameMaximum count of records checked in one bitmap supervision interval

ModifiableYES

DescriptionThe parameter defines the maximum count of records checked during one supervision interval of bitmap files. When the value is 0, bitmap supervision is not used.

Default value(s)G: 512D MX: 50D

Allowed values0H - 0FF00H

Forbidden values

DependenceDependence on other parameters does not exist.

Value Meaning

0D Bitmap supervision is off.

Page 89: 10

DN9979835 89

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Feature10482 - SUPERVISION OF FILES

3.2.9 Parameter 009:0050 BITMAP_CHECK_BYTES

Descriptive nameMaximum count of bytes checked in one bitmap supervision interval

ModifiableYES

DescriptionThe parameter defines the maximum count of bytes checked during one supervision interval of bitmap files. When the value is 0, bitmap supervision is not used.

Default value(s)G: 25000D

Allowed values0H - 0FF00H

Forbidden values

DependenceDependence on other parameters does not exist.

Feature10482 - SUPERVISION OF FILES

3.2.10 Parameter 009:0051 BITMAP_SUPERV_INTERVAL

Descriptive nameBitmap supervision interval

ModifiableYES

DescriptionThe parameter defines the bitmap supervision interval. The unit is 0.01 seconds. When the value is 0, bitmap supervision is not used.

Default value(s)G: 50D MX: 500D

Value Meaning

0 Bitmap supervision is off.

Page 90: 10

90 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Allowed values0H - 0FF00H

Increments10

Forbidden values

DependenceDependence on other parameters does not exist.

Feature10482 - SUPERVISION OF FILES

3.2.11 Parameter 009:0052 CHKSUM_SUPERV_INTERVAL

Descriptive nameChecksum supervision interval

ModifiableYES

DescriptionThe parameter defines the checksum supervision interval. The unit is 0.01 seconds. When the value is 0, checksum supervision is not used.

Default value(s)G: 500D

Allowed values0H - 0FF00H

Increments10

Forbidden values

DependenceDependence on other parameters does not exist.

Feature10482 - SUPERVISION OF FILES

3.2.12 Parameter 009:0055 TR_EQU_COLL_START_TIM

Descriptive nameStarting Time of Existence Data Collection of BTS-Controlled Transmission Equipment

Page 91: 10

DN9979835 91

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

ModifiableYES

DescriptionThe parameter defines the starting time of the collection of the transmission equipment existence data. The time is in hours after midnight. The unit used is one hour. The col-lection of data is started every day at the time defined in this parameter. Zero is used to deny the collection. Feature number: 06023

Default value(s)SX: 4D

Allowed values0D-24D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS6023 - PCM DOWNTIME STATISTICS

3.2.13 Parameter 009:0072 CBC_INDIC_FILT_TIMER

Descriptive nameTime limit for indicating cell broadcast interruptions to CBC

ModifiableYES

DescriptionThe parameter defines the time limit (in seconds) of cell broadcast interruptions which causes an indication to the CBC. CBC Cell Broadcast Centre Feature number: BSS7002 / Cell Broadcast Centre Interface to Cell Broadcast Centre.

Default value(s)SX: 180D

Allowed values0D - 1200D

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS7002 - CELL BROADCAST INTERFACE TO CELL BROADCAST CENTRE

Page 92: 10

92 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

FeatureBSS7002 - CELL BROADCAST CENTRE INTERFACE TO CELL BROADCAST CENTRE

3.2.14 Parameter 009:0075 NUMBER_OF_Q1_CHANNELS

Descriptive nameNumber of Q1 channels to be reserved

ModifiableYES

DescriptionThe parameter defines the number of time slots reserved from the AS7 plug-in unit to be used for Q1 channels. The S12 feature "High Capacity BSC3i" introduces the new values for this parameter. The new default value is 255D(FFH), and the value range is increased to 56. If the parameter value is the default, then the OMUs AS7-specific values are used. If the parameter value is not the default, the value of the parameter is used to determine the number of the Q1 channels.

Default value(s)SX: 255D

Allowed values0 - 56, 255D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature30239 - AS7 LAPD SUPPORT FOR Q1

3.2.15 Parameter 009:0079 TRE_CHKSUM_COLL_COUNT

Descriptive nameTransmission equipment checksum collection count

ModifiableYES

DescriptionThe parameter defines the count of the executions per day for Q1 implemented trans-mission equipment checksum collection. Collection is done every day starting from 03:00. E.g. parameter value 3 means that collection is done three times per day, the first collection at 03:00 and the next at 11:00. Value 0 means that checksum collection is not done.

Page 93: 10

DN9979835 93

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)SX: 1D

Allowed values0D-24D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature8120 - PETS TRANSMISSION EQUIPMENT STATISTICS

3.2.16 Parameter 009:0090 BTS_Q1_RT_UPDATE_COUNT

Descriptive nameNumber of BTS realtime updates in a day

ModifiableYES

DescriptionThe BTS makes realtime update to Q1 bus transmission equipment periodically. BTS clock is quite inaccurate, 6 to 8 seconds per day. Therefore transmission equipment realtime varies quite a lot. The BTS realtime updating is done periodically by using existing update feature. The TQHPRB sends periodically time_changed_event_s message to the GUPDAT that sends new time to each BTS found from RNW DB. This parameter defines the number of realtime updates made in a day. Possible values are 0 to 4 times per day, zero means that updating is not on and 1 is default value. First realtime update is made at 05:00.

Default value(s)SX: 1D

Allowed values0D-4D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10012 - POSITION BASED SERVICES OandM AND TALKFAMILY DF6 SUPPORT IN BSC

Page 94: 10

94 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.2.17 Parameter 009:0098 SDCCH_SIGN_SUP_BTS_MSC

Descriptive nameGuard timer for long SDCCH reservations

ModifiableYES

DescriptionThe parameter indicates the value of the guard timer in seconds for idle time between two interface messages. If no messages are received during this time, the SDCCH channel is released. Allowed parameter values are 32 (default), 110, 290, 590 and 890. Parameter value is dependent on timer T9105 (min 2sec, max 240sec, def 10sec). For example: 32 sec + T9105 = 42 sec (default).

Default value(s)SX: 32D

Allowed values32D,110D,290D,590D,890D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature- -

3.2.18 Parameter 009:0137 SEC_EVENT_LOAD_LIMIT

Descriptive nameSecurity reporting event load limit

ModifiableYES

DescriptionThis parameter defines the limit for normal load by events per second. If the limit is exceeded the alarm normal load of security reporting exceeded (3320) is raised.

Default value(s)GX: 10D

Allowed values1D-1000D

Increments1

Page 95: 10

DN9979835 95

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Forbidden values

DependenceDependence on other parameters does not exist.

Feature10206 - Security Reporting

3.2.19 Parameter 009:0138 SEC_EVENT_UNSUC_LIMIT

Descriptive nameUnsuccessful security reporting event alarm limit

ModifiableYES

DescriptionThis parameter defines the limit for unsuccessful events in a half minute period. If the limit is exceeded, the alarm limit of unsuccessful security events reached (3319) is raised.

Default value(s)GX: 50D

Allowed values1D-1000D

Increments1

Forbidden values

DependenceDependence on other parameters does not exist.

Feature10206 - Security Reporting

Page 96: 10

96 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.2.20 Parameter 009:0172 ONE_BIT_ERRORS_LIMIT

Descriptive nameOne bit errors limit value

ModifiableYES

DescriptionThis parameter is used to change the limit value, based on how many one bit RAM error occurs in one hour before the alarm is raised.

Default value(s)GX: 100D

Allowed values0 - 0FF00H

Increments

Forbidden values

DependenceDependence on other parameters does not exist.

Feature-

3.3 Parameter class 010 IMPLEMENTA_OF_CALL_CTRLDescriptive NameImplementation of call control

DescriptionThis class includes implementation values of call control.

3.3.1 Parameter 010:0004 PCM_MAINT_ANNOUNCE_TL

Descriptive nameStart time of the prompt maintenance alarm indication

ModifiableNO

DescriptionThe parameter affects the starting time of maintenance functions of faulty PCM circuits. Usually these maintenance functions mean that ongoing calls in the trunk circuits are released.

Page 97: 10

DN9979835 97

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)G: 1000D

Allowed values200D - 2000D

Increments10

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.3.2 Parameter 010:0005 DR_USAGE

Descriptive nameDirected Retry

ModifiableYES

DescriptionThe parameter (DR_USAGE) is a BSC-specific parameter that defines whether the Directed Retry procedure is in use or not.

Default value(s) MX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

Feature -

3.3.3 Parameter 010:0006 IDR_USAGE

Descriptive nameIntelligent Directed Retry

Page 98: 10

98 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableYES

DescriptionThe parameter (IDR_USAGE) is a BSC-specific parameter that defines whether the Intelligent Directed Retry procedure is in use or not.

Default value(s) MX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

Feature -

3.3.4 Parameter 010:0007 TR_USAGE_IN_MTC

Descriptive nameTrunk Reservation in mobile terminated call

ModifiableYES

DescriptionThe parameter (TR_USAGE_IN_MTC) is a BSC-specific parameter that defines whether the Trunk Reservation procedure is in use or not for mobile terminated calls.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

Feature -

Page 99: 10

DN9979835 99

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.3.5 Parameter 010:0008 TR_USAGE

Descriptive nameTrunk Reservation

ModifiableYES

DescriptionThe parameter (TR_USAGE) is a BSC-specific parameter that defines whether the Trunk Reservation procedure is in use or not.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

Feature -

3.3.6 Parameter 010:0011 CM_BASED_SUBS_TYPE

Descriptive nameClassmark-based subscriber type

ModifiableYES

DescriptionThe parameter determines which MS power classes indicate GSM subscribers and which indicate MCN subscribers.

Default value(s)SX: 0H

Allowed values0-1FH

Forbidden values20H-0FF00H

Dependence

Page 100: 10

100 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Feature -

3.3.7 Parameter 010:0012 PRIOR_BASED_SERV_SEP

Descriptive namePriority-based service separation

ModifiableYES

DescriptionThe parameter determines whether the MS classmark or the MS priority level is used to distinguish between GSM subscribers and MCN subscribers. (Default: false; means that MS classmark is used.)

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

Feature -

3.3.8 Parameter 010:0014 C2_CELL_RESEL

Descriptive nameC2 microcell re-selection parameter in use

ModifiableYES

DescriptionThe parameter determines whether the C2 microcell re-selection parameter shall be used or not. The C2 microcell re-selection parameter is located in the radio network database of the BSC.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Page 101: 10

DN9979835 101

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Forbidden values

Dependence

Feature -

3.3.9 Parameter 010:0015 FACCH_CALL_SET_UP

Descriptive nameFACCH call set-up in use

ModifiableYES

DescriptionThe parameter determines whether the FACCH call set-up shall be used or not.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

Feature -

3.3.10 Parameter 010:0016 PREEMPT_USAGE

Descriptive namePreemption usage.

ModifiableYES

DescriptionThe parameter determines whether the preemption feature is in use or not.

Value Meaning

TRUE The preemption feature is in use.

FALSE The preemption feature is not in use.

Page 102: 10

102 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

Feature -

3.3.11 Parameter 010:0019 CI_BASED_HO_EVAL_P

Descriptive nameC/I based HO candidate evaluation

ModifiableYES

DescriptionThe parameter CI_BASED_HO_EVAL_P defines whether the feature C/I Based handover Candidate Evaluation is in use or not. Feature number: 03153

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

FeatureBSC3153 - C/I BASED HANDOVER CANDIDATE EVALUATION

3.3.12 Parameter 010:0020 EXT_CELL_USAGE_P

Descriptive nameThe usage of extended cell radius

ModifiableYES

Page 103: 10

DN9979835 103

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThis parameter defines whether Extended Cell Radius is in use or not.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

FeatureBSC4015 - EXTENDED CELL RADIUS

3.3.13 Parameter 010:0021 MS_PWR_OPT_IN_HO_P

Descriptive nameMS power optimization in handover

ModifiableYES

DescriptionThe parameter MS_PWR_OPT_IN_HO_P defines whether the feature Optimization of the MS Power Level in Handover is in use or not. Feature number: BSC3151.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

FeatureBSC3151 - OPTIMIZATION OF MS POWER LEVEL IN HANDOVERS

3.3.14 Parameter 010:0022 SDCCH_HO_USAGE_P

Descriptive nameSDCCH Handover

Page 104: 10

104 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableYES

DescriptionThe parameter SDCCH_HO_USAGE_P is a BSC-specific parameter that defines whether the SDCCH Handover procedure is in use or not. Feature number: B241.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

FeatureB241 - SDCCH HANDOVER

3.3.15 Parameter 010:0023 UNDERLAY_OVERLAY_US_P

Descriptive nameIntelligent underlay-overlay

ModifiableYES

DescriptionThe parameter UNDERLAY_OVERLAY_USAGE_P defines whether the underlay-overlay handover procedure and the underlay-overlay statistics are in use or not. Feature number: 04016

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

FeatureBSC4016 - INTELLIGENT OVERLAY-UNDERLAY

Page 105: 10

DN9979835 105

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.3.16 Parameter 010:0024 CHAINED_CELL_USAGE_P

Descriptive nameThe usage of chained cells in rapid field drop

ModifiableYES

DescriptionThe parameter CHAINED_CELL_USAGE_P defines whether Chained cells in rapid field drop is in use or not. Feature number: 04013.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

FeatureBSC4013 - CHAINED CELLS IN RAPID FIELD DROP

3.3.17 Parameter 010:0025 FMMS_USAGE_P

Descriptive nameFast Moving MS Handling Usage

ModifiableYES

DescriptionThe parameter is BSC-specific and defines whether the feature Fast Moving MS Handling in Macro Cell is in use or not. Feature number: BSS5221.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS5221 - FAST MOVING MS HANDLING IN MACRO CELL

Page 106: 10

106 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

FeatureBSS5221 - FAST MOVING MS HANDLING IN MARCO CELL

3.3.18 Parameter 010:0026 DUAL_BAND_USAGE_P

Descriptive nameDual Band GSM/DCS Network Operation usage

ModifiableYES

DescriptionThis parameter defines whether the feature Dual Band GSM/DCS Network Operation is in use or not. This parameter is BSC-specific. Feature number: BSS5050.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS5050 - DUAL BAND GSM/DCS

FeatureBSS5050 - DUAL BAND GSM/DCS

3.3.19 Parameter 010:0027 RNOS_USAGE_P

Descriptive nameRadio Network Optimization Statistics Usage

ModifiableYES

DescriptionThe parameter defines whether the Radio Network Optimization Statistics is in use or not. The Radio Network Optimization Statistics contains the following features: - Rx level statistics (BSC4091) - Link balance per MS classmark (BSC4092) - Timing advance sta-tistics (BSC4093) Feature number: BSC4090.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Page 107: 10

DN9979835 107

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSC4090 -

FeatureBSC4090 - RADIONETWORK OPTIMIZATION STATISTICS

3.3.20 Parameter 010:0028 RXQ_HAC_USAGE_P

Descriptive nameRX Quality Statistics and Handover Adjacent Cell Measurement

ModifiableYES

DescriptionThe parameter defines whether RX quality statistics and handover adjacent cell mea-surement are in use or not. Feature number: BSC3701.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

FeatureBSC3701 - RXQUAL STATISTICS

3.3.21 Parameter 010:0030 DISTANCE_VERIFYING

Descriptive nameDistance Verifying

Value Meaning

FALSE RX quality statistics and handover adjacent cell measure-ment are not in use.

TRUE RX quality statistics and handover adjacent cell measure-ment are in use.

Page 108: 10

108 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableYES

DescriptionThe parameter is a BSC-specific parameter which is used to define whether the Distance Verifying feature is used in the BSC or not.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature5280 -

3.3.22 Parameter 010:0031 SATELL_ABIS_IN_USE

Descriptive nameSatellite Abis

ModifiableYES

DescriptionThe parameter indicates to certain BSC processes whether satellite circuits are used between the BSC and the BTS. When the customer orders the satellite Abis feature, the parameter is set to FALSE in the delivered BSC. By changing the parameter value the customer can later change the state of the feature by himself.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Value Meaning

TRUE satellite circuits are used

FALSE satellite circuits are not used

Page 109: 10

DN9979835 109

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Dependence

Feature -

3.3.23 Parameter 010:0032 Q3_BTS_HW_REM_INQ_USE

Descriptive nameRemote interrogation of the BTS serial and version numbers feature

ModifiableYES

DescriptionThis parameter determines whether the remote interrogation of BTS serial and version numbers (HW configuration) through the Q3 interface is in use or not.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Dependence

Feature -

3.3.24 Parameter 010:0033 EFR_SUPPORT_IN_BSC

Descriptive nameEFR speech coder support in BSC

ModifiableYES

DescriptionThe parameter defines whether the EFR speech coder is supported by the BSC or not. The use of this parameter depends on the optionality handling parameter EFR_OPTION_IN_BSC.

Value Meaning

TRUE BSC supports EFR

FALSE BSC does not support EFR

Page 110: 10

110 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS5360 - ENHANCED FULL RATE FOR DCS 1900 TRAU

Feature -

3.3.25 Parameter 010:0034 SMS_CB_DRX_USD_IN_BSC

Descriptive nameSMS CB DRX in BSC; Usage

ModifiableYES

DescriptionThe parameter defines whether the SMS CB DRX feature is used or not in the BSC. Dis-continuous reception of cell broadcasted short messages. SMS Short Message Service CB Cell Broadcast DRX Discontinuous Reception Feature number: BSS6025.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS6025 - SMS-CB DRX

FeatureBSS6025 - SMS-CB DRX

Value Meaning

TRUE The SMS CB DRX feature is used in the BSC.

FALSE The SMS CB DRX feature is not used in the BSC.

Page 111: 10

DN9979835 111

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.3.26 Parameter 010:0035 HOT_SPOT_USAGE_P

Descriptive nameHot Spot Location usage

ModifiableYES

DescriptionThe parameter defines whether the Hot Spot Location feature is in use or not. Feature number: 06082

Default value(s) G: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS6082 - HOT SPOT LOCATION AND CAPACITY PREDICTION

FeatureBSS6082 - HOT SPOT LOCATION AND CAPACITY PREDICTION

3.3.27 Parameter 010:0036 CI_STATISTICS_USAGE_P

Descriptive nameC/I Ratio Statistics

ModifiableYES

DescriptionThe parameter defines whether the C/I ratio statistics measurement is in use or not. Feature number: 06081.

Value Meaning

TRUE The Hot Spot Location feature is in use.

FALSE The Hot Spot Location feature is not in use

Value Meaning

TRUE C/I ratio statistics measurement is in use

FALSE C/I ratio statistics measurement is not in use

Page 112: 10

112 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s) G: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS6081 - C/I RATIO STATISTICS

FeatureBSS6081 - C/I RATIO STATISTICS

3.3.28 Parameter 010:0042 DYNAMIC_SDCCH

Descriptive nameDynamic SDCCH in BSC

ModifiableYES

DescriptionThe parameter determines whether the Dynamic SDCCH option is activated or not in the BSC. Feature number: BSS7036 / Dynamic SDCCH.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS7036 - DYNAMIC SDCCH ALLOCATION

FeatureBSS7036 - DYNAMIC SDCCH

Value Meaning

TRUE The Dynamic SDCCH feature is activated in the BSC.

FALSE The Dynamic SDCCH feature is not activated in the BSC.

Page 113: 10

DN9979835 113

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.3.29 Parameter 010:0044 SMS_CBC_USD_IN_BSC

Descriptive nameUse of CBC interface in BSC

ModifiableYES

DescriptionThe parameter defines whether the SMS CBC interface is activated or not in the BSC. Cell broadcast centre for short message service. SMS Short Message Service CBC Cell Broadcast Centre Feature number: BSS7002.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS7002 - CELL BROADCAST INTERFACE TO CELL BROADCAST CENTRE

FeatureBSS7002 - CELL BROADCAST INTERFACE TO CELL BROADCAST CENTRE

3.3.30 Parameter 010:0045 ICE_USAGE_P

Descriptive nameHandover Support for Coverage Enhancements

ModifiableYES

DescriptionThe parameter determines whether the Handover Support for Coverage Enhancements option is activated or not in the BSC. Feature number: BSS7064/Handover Support for Coverage Enhancements.

Value Meaning

TRUE The SMS CBC interface is activated.

FALSE The SMS CBC interface is not activated

Value Meaning

TRUE The Handover Support for Coverage Enhancements option is activated in the BSC.

Page 114: 10

114 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS7064 - HANDOVER SUPPORT FOR

FeatureBSS7064 - HANDOVER SUPPORT FOR

3.3.31 Parameter 010:0046 ERFD_USAGE_P

Descriptive nameEnhanced Rapid Field Drop

ModifiableYES

DescriptionThe parameter determines whether the Enhanced Rapid Field Drop option is activated or not in the BSC. Feature number: BSS7031 / Enhanced Rapid Field Drop.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

FALSE The Handover Support for Coverage Enhancements option is not activated in the BSC.

Value Meaning

Value Meaning

TRUE The Enhanced Rapid Field Drop option is activated in the BSC.

FALSE The Enhanced Rapid Field Drop option is not activated in the BSC.

Page 115: 10

DN9979835 115

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

BSS7031 - ENHANCED RAPID

FeatureBSS7031 - ENHANCED RAPID

3.3.32 Parameter 010:0047 HSCSD_USAGE

Descriptive nameHSCSD in BSC

ModifiableYES

DescriptionThe parameter determines whether the HSCSD option is activated or not in the BSC. Feature number: BSS7003 / HSCSD.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS7003 - HIGH SPEED CIRCUIT SWITCHED DATA

FeatureBSS7003 - HIGH SPEED CIRCUIT SWITCHED DATA

3.3.33 Parameter 010:0048 DATA_144_USAGE

Descriptive name14.4 kbit/s in BSC

ModifiableYES

DescriptionThe parameter determines whether 14.4 kbit/s channel coding is used in the BSC or not. Feature number: BSS7037 / 14.4 kbit/s data services.

Value Meaning

TRUE The HSCSD option is activated in the BSC.

FALSE The HSCSD option is not activated in the BSC.

Page 116: 10

116 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS7037 - 14.4 KBIT/S GSM DATA SERVICES

FeatureBSS7037 - 14.4 KBIT/S GSM DATA SERVICES

3.3.34 Parameter 010:0050 DADLB_USAGE_P

Descriptive nameDirect Access to Desired Layer/Band Usage

ModifiableYES

DescriptionThe BSC-specific parameter DALDB_USAGE_P defines whether the feature Direct Access to Desired Layer/Band is in use or not.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Value Meaning

TRUE 14.4 kbit/s channel coding is used in the BSC.

FALSE 14.4 kbit/s channel coding is not used in the BSC

Value Meaning

TRUE The feature Direct Access to Desired Layer/Band is in use in the BSC.

FALSE The feature Direct Access to Desired Layer/Band is in not use in the BSC.

Page 117: 10

DN9979835 117

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DependenceThe parameter is dependent on feature(s):

BSS8032 - DIRECT ACCESS TO DESIRED LAYER/BAND

FeatureBSS8032 - DIRECT ACCESS TO DESIRED LAYER/BAND

3.3.35 Parameter 010:0051 DC_OBSERVATION_USAGE

Descriptive nameUse of Trace Window for Dropped Calls feature

ModifiableYES

DescriptionThis parameter defines the use of the optional BSC feature Trace Window for Dropped Calls, which is implemented as observation type Dropped Call Observation (DC_OBS).

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS8121 - TRACE WINDOW FOR DROPPED CALLS

FeatureBSS8121 - TRACE WINDOW FOR DROPPED CALLS

3.3.36 Parameter 010:0052 FCS_SET_USAGE

Descriptive nameUsage of the feature Flexible counter selection set

ModifiableYES

Value Meaning

TRUE The Trace Window for Dropped Calls feature is activated.

FALSE The Trace Window for Dropped Calls feature is deacti-vated.

Page 118: 10

118 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionThe parameter defines whether the optional feature Flexible counter selection set is in use or not in BSC.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS8128 - FLEXIBLE COUNTER

FeatureBSS8128 - FLEXIBLE COUNTER SELECTION SET

3.3.37 Parameter 010:0053 AMH_USAGE_P

Descriptive nameAdvanced Multilayer Handling Usage

ModifiableYES

DescriptionThe parameter defines whether the feature Advanced Multilayer Handling is in use or not in the BSC.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

Value Meaning

TRUE Flexible counter selection set is in use in BSC.

FALSE Flexible counter selection set is not in use in BSC.

Value Meaning

TRUE Advanced Multilayer Handling is in use in the BSC.

FALSE Advanced Multilayer Handling is not in use in the BSC.

Page 119: 10

DN9979835 119

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DependenceThe parameter is dependent on feature(s):

BSS8123 - ADVANCED MULTILAYER HANDLING

FeatureBSS8123 - ADVANCED MULTILAYER HANDLING

3.3.38 Parameter 010:0065 CHAN_FIN_USAGE_P

Descriptive nameChannel Finder measurement, use of

ModifiableYES

DescriptionThe parameter determines whether the optional feature Channel Finder measurement is on or off in the BSS.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceThe parameter is dependent on feature(s):

BSS9041 - CHANNEL FINDER MEASUREMENT

FeatureBSS9041 - CHANNEL FINDER MEASUREMENT

3.3.39 Parameter 010:0068 RCS_FER_FILTER

Descriptive nameData filtering from FER measurement

ModifiableYES

Value Meaning

TRUE The Channel Finder measurement option is on in the BSS.

FALSE The Channel Finder measurement option is off in the BSS.

Page 120: 10

120 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionData filtering from Frame Erasure (FER) measurement if RX Level is below -98dBm

Default value(s) SX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.3.40 Parameter 010:0071 DTM_CALL_PENALTY_TIMER

Descriptive nameDTM call assignment penalty timer

ModifiableYES

DescriptionThis parameter defines the value for the Wait Indication. When a MO DTM call estab-lishment is rejected with a DTM REJECT message, the Wait Indication within the message determines the time period during which the MS is not allowed to make a new packet access attempt to the same cell.

Default value(s)SX: 6D

Allowed values1D-255D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20088 - Dual Transfer Mode

Value Meaning

0 Feature Disabled

1 Feature Enabled

Page 121: 10

DN9979835 121

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.4 Parameter class 012 OVERLOADDescriptive NameOverload handling

DescriptionThe class includes parameters needed in overload handling.

3.4.1 Parameter 012:0039 NAMETBL_MAX_SERV

Descriptive nameMaximum number of services in nametable

ModifiableYES

DescriptionThe parameter defines the maximum number of services in the nametable. The name server, which is located in every computer, allocates space in the nametable for the number of services indicated by this parameter.

Default value(s)G: 3E8H 2X: 02731H

Allowed values1-1400H

Forbidden values0, 1401-0FF00H

DependenceDependence on other parameters does not exist.

Feature10353 - NAME -SERVER

3.5 Parameter class 016 ALARM_SYSTEMDescriptive NameAlarm system

DescriptionThis class includes parameters of the alarm system.

3.5.1 Parameter 016:0000 ALARM_PRINT_END_MARK

Descriptive nameAlarm print end mark

Page 122: 10

122 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableYES

DescriptionThe parameter determines the end mark of an alarm printout.

Default value(s)G: 0D

Allowed values0D, 1D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.5.2 Parameter 016:0001 LAMP_PANEL_POLARITY

Descriptive nameLamp panel polarity

ModifiableYES

DescriptionThe parameter determines the lamp panel polarity.

Default value(s)G: 1D

Allowed values0D, 1D

Forbidden values

Value Meaning

0D No end text.

1D END OF MESSAGE.

Value Meaning

0D Reverse polarity.

1D Normal polarity.

Page 123: 10

DN9979835 123

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DependenceDependence on other parameters does not exist.

Feature10166 - HARDWARE ALARMS INTERFACE

10170 - ALARM OUTPUT CONTROL

3.5.3 Parameter 016:0002 ALARM_DRIVEN_OUTPUTS

Descriptive nameNumber of alarm outputs directed by alarms

ModifiableYES

DescriptionThe parameter defines the number of alarm outputs which can be controlled on the basis of the alarms handled by the alarm system. The rest of the alarm outputs can be used for other purposes.

Default value(s)G: 16D S: 0D

Allowed values0D, 8D, 12D, 16D

Forbidden valuesALL OTHER VALUES

DependenceDependence on other parameters does not exist.

Feature -

3.5.4 Parameter 016:0003 LAMP_PANEL_BUZZER

Descriptive nameActivation of lamp panel buzzer by alarms

Value Meaning

0D There are no outputs directed by alarms.

8D 8 first outputs out of a maximum of 16 can be directed by alarms.

12D 12 first outputs out of a maximum of 16 can be directed by alarms.

16D All outputs can directed by alarms.

Page 124: 10

124 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableYES

DescriptionThe parameter defines the way in which the state of alarm outputs is updated in order to control the lamp panel buzzer in case an alarm controlling the alarm output is set. The lamp panel is controlled by the alarm outputs and, by default, the buzzer of the lamp panel is activated only when a new lamp is lit.

Default value(s)G: 0D MX: 1D

Allowed values0D, 1D

Forbidden valuesALL OTHER VALUES

DependenceDependence on other parameters does not exist.

Feature517 - AUDIBLE ALARMS

3.5.5 Parameter 016:0007 BTS_ALARM_FILTERING_USE

Descriptive nameBase Station alarm filtering in BSC, use of

ModifiableYES

DescriptionThe operator can use the parameter to prevent filtering of base station alarms in the BSC. However, filtering of the base station alarms to the recovery interface remains in use after prevention.

Value Meaning

0D The state of alarm outputs is updated only when the first alarm controlling a certain alarm output is set, or when the last alarm controlling a certain alarm output is cancelled. Thus the lamp panel buzzer is activated only when no alarms controlling a certain alarm output are active and the first alarm of the kind is set. New alarms controlling an alarm output which is already in alarm state do not cause activation of the buzzer.

1D Each time a new alarm controlling an alarm output is set, the state of all the alarm outputs is first reset and then immediately set again according to the current alarm situation. With this, the lamp panel buzzer is activated each time a new alarm control-ling an alarm output is set.

Page 125: 10

DN9979835 125

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s) 1 (T)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9022 - FILTERING ALARMS

3.6 Parameter class 037 RADIO_NW_CTRL_RELDescriptive NameRadio network controlling

DescriptionThe parameter class contains parameters that are used in controlling the functioning of the radio network in BSC, i.e. the minimum attenuation of TX-power in certain frequen-cies.

3.6.1 Parameter 037:0000 ATTN_FOR_2_GEN_BTS

Descriptive nameAttenuation value for 2nd generation BTS

ModifiableNO

DescriptionThe parameter defines the customer-specific minimum TX-power attenuation for 2nd generation base stations in certain channels. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 10D

Allowed values0...0XFF00H

Value Meaning

T Base station alarm filtering is in use in the BSC

F Base station alarm filtering is not in use in the BSC

Page 126: 10

126 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL MANAGEMENT

3.6.2 Parameter 037:0001 ATTN_FOR_3_GEN_BTS

Descriptive nameAttenuation value for Talk-family BTS

ModifiableNO

DescriptionThe parameter defines the customer-specific minimum TX-power attenuation for Talk-family of base stations in certain channels. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 8D

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.3 Parameter 037:0002 ATTN_FOR_4_GEN_BTS

Descriptive nameAttenuation value for PrimeSite BTS

ModifiableNO

DescriptionThe parameter defines the customer-specific minimum TX-power attenuation for Pri-meSite base stations in certain channels. Feature number: 09828 / Guard Channel Man-agement.

Page 127: 10

DN9979835 127

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)G: 0D SX: 4D

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.4 Parameter 037:0003 ATTENUATED_CH_NBR_1

Descriptive name1. attenuated channel number

ModifiableNO

DescriptionThe parameter defines the first channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 512D

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.5 Parameter 037:0004 ATTENUATED_CH_NBR_2

Descriptive name2. attenuated channel number

ModifiableNO

Page 128: 10

128 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionThe parameter defines the second channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 585D

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.6 Parameter 037:0005 ATTENUATED_CH_NBR_3

Descriptive name3. attenuated channel number

ModifiableNO

DescriptionThe parameter defines the third channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 587D

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.7 Parameter 037:0006 ATTENUATED_CH_NBR_4

Descriptive name4. attenuated channel number

Page 129: 10

DN9979835 129

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

ModifiableNO

DescriptionThe parameter defines the fourth channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 610D

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.8 Parameter 037:0007 ATTENUATED_CH_NBR_5

Descriptive name5. attenuated channel number

ModifiableNO

DescriptionThe parameter defines the fifth channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 612D

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

Page 130: 10

130 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.6.9 Parameter 037:0008 ATTENUATED_CH_NBR_6

Descriptive name6. attenuated channel number

ModifiableNO

DescriptionThe parameter defines the sixth channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 685D

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.10 Parameter 037:0009 ATTENUATED_CH_NBR_7

Descriptive name7. attenuated channel number

ModifiableNO

DescriptionThe parameter defines the seventh channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 687D

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

Page 131: 10

DN9979835 131

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

FeatureBSS7063 - GUARD CHANNEL

3.6.11 Parameter 037:0010 ATTENUATED_CH_NBR_8

Descriptive name8. attenuated channel number

ModifiableNO

DescriptionThe parameter defines the eighth channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 710D

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.12 Parameter 037:0011 ATTENUATED_CH_NBR_9

Descriptive name9. attenuated channel number

ModifiableNO

DescriptionThe parameter defines the ninth channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 712D

Allowed values0...0XFF00H

Forbidden values

Page 132: 10

132 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.13 Parameter 037:0012 ATTENUATED_CH_NBR_10

Descriptive name10. attenuated channel number

ModifiableNO

DescriptionThe parameter defines the tenth channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 735D

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.14 Parameter 037:0013 ATTENUATED_CH_NBR_11

Descriptive name11. attenuated channel number

ModifiableNO

DescriptionThe parameter defines the eleventh channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 737D

Allowed values0...0XFF00H

Page 133: 10

DN9979835 133

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.15 Parameter 037:0014 ATTENUATED_CH_NBR_12

Descriptive name12. attenuated channel number

ModifiableNO

DescriptionThe parameter defines the twelfth channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 810D

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.16 Parameter 037:0015 ATTENUATED_CH_NBR_13

Descriptive name13. attenuated channel number (spare)

ModifiableNO

DescriptionThe parameter defines the thirteenth channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 0FF00H

Page 134: 10

134 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Allowed values0...0FF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.17 Parameter 037:0016 ATTENUATED_CH_NBR_14

Descriptive name14. attenuated channel number (spare)

ModifiableNO

DescriptionThe parameter defines the fourteenth channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Manage-ment.

Default value(s)SX: 0FF00H

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.18 Parameter 037:0017 ATTENUATED_CH_NBR_15

Descriptive name15. attenuated channel number (spare)

ModifiableNO

Page 135: 10

DN9979835 135

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThe parameter defines the fifteenth channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 0FF00H

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.19 Parameter 037:0018 ATTENUATED_CH_NBR_16

Descriptive name16. attenuated channel number (spare)

ModifiableNO

DescriptionThe parameter defines the sixteenth channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Management.

Default value(s)SX: 0FF00H

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.20 Parameter 037:0019 ATTENUATED_CH_NBR_17

Descriptive name17. attenuated channel number (spare)

Page 136: 10

136 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableNO

DescriptionThe parameter defines the seventeenth channel number in which the TX-power of the base station must be attenuated. Feature number: 09828 / Guard Channel Manage-ment.

Default value(s)SX: 0FF00H

Allowed values0...0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.21 Parameter 037:0022 ATTN_FOR_METROSITE_BTS

Descriptive nameAttenuation value for MetroSite BTS

ModifiableNO

DescriptionThe parameter defines the customer-specific minimum TX-power attenuation for Met-roSite base stations in certain channels.

Default value(s)SX: 0

Allowed values0-0FF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

BSS8103 - MANAGEMENT

Page 137: 10

DN9979835 137

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.6.22 Parameter 037:0024 ATTN_FOR_ULTRASITE_BTS

Descriptive nameAttenuation value for UltraSite BTS

ModifiableNO

DescriptionThe parameter defines the customer-specific minimum TX-power attenuation for Ultra-Site base stations in certain channels.

Default value(s)SX: 10D

Allowed values0-0XFF00H

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS7063 - GUARD CHANNEL

3.6.23 Parameter 037:0025 ATTN_FOR_INSITE_BTS

Descriptive nameAttenuation value for InSite BTS

ModifiableNO

DescriptionThe parameter defines the customer-specific minimum TX-power attenuation for InSite base stations in certain channels.

Default value(s)SX: 0

Allowed values0-0FF00H

Forbidden values

DependenceDependence on other parameters does not exist.

Page 138: 10

138 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

FeatureBSS7063 - GUARD CHANNEL

BSS8126 - MANAGEMENT

3.6.24 Parameter 037:0026 ATT_850_CH_NBR_1

Descriptive nameAttenuated channel number 128

ModifiableNO

DescriptionThe parameter defines the first channel number for 850MHz frequency in which the TX-power of the base station must be attenuated.

Default value(s)SX: 128D

Allowed values0 - 65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10087 - SUPPORT FOR 850 FREQUENCIES

3.6.25 Parameter 037:0027 ATT_850_CH_NBR_2

Descriptive nameAttenuated channel number 181

ModifiableNO

DescriptionThe parameter defines the second channel number for 850MHz frequency in which the TX-power of the base station must be attenuated.

Default value(s)SX: 181D

Allowed values0 - 65280D

Page 139: 10

DN9979835 139

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10087 - SUPPORT FOR 850 FREQUENCIES

3.6.26 Parameter 037:0028 ATT_850_CH_NBR_3

Descriptive nameAttenueted channel number 183

ModifiableNO

DescriptionThe parameter defines the third channel number for 850MHz frequency in which the TX-power of the base station must be attenuated.

Default value(s)SX: 183D

Allowed values0 - 65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10087 - SUPPORT FOR 850 FREQUENCIES

3.6.27 Parameter 037:0029 ATT_850_CH_NBR_4

Descriptive nameAttenuated channel number 231

ModifiableNO

DescriptionThe parameter defines the fourth channel number for 850MHz frequency in which the TX-power of the base station must be attenuated.

Default value(s)SX: 231D

Page 140: 10

140 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Allowed values0 - 65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10087 - SUPPORT FOR 850 FREQUENCIES

3.6.28 Parameter 037:0030 ATT_850_CH_NBR_5

Descriptive nameAttenuated channel number 233

ModifiableNO

DescriptionThe parameter defines the fifth channel number for 850MHz frequency in which the TX-power of the base station must be attenuated.

Default value(s)SX: 233D

Allowed values0 - 65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10087 - SUPPORT FOR 850 FREQUENCIES

3.6.29 Parameter 037:0031 ATT_850_CH_NBR_6

Descriptive nameSpare attenuated channel number

ModifiableNO

DescriptionThe parameter defines the sixth channel number for 850MHz frequency in which the TX-power of the base station must be attenuated.

Page 141: 10

DN9979835 141

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)SX: 65280D

Allowed values0...65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10087 - SUPPORT FOR 850 FREQUENCIES

3.6.30 Parameter 037:0032 ATT_850_CH_NBR_7

Descriptive nameSpare attenuated channel number

ModifiableNO

DescriptionThe parameter defines the seventh channel number for 850MHz frequency in which the TX-power of the base station must be attenuated.

Default value(s)SX: 65280D

Allowed values0...65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10087 - SUPPORT FOR 850 FREQUENCIES

3.6.31 Parameter 037:0033 ATT_850_CH_NBR_8

Descriptive nameAttenuated channel number 251

ModifiableNO

Page 142: 10

142 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionThe parameter defines the eighth channel number for 850MHz frequency in which the TX-power of the base station must be attenuated.

Default value(s)SX: 251D

Allowed values0 - 65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10087 - SUPPORT FOR 850 FREQUENCIES

3.6.32 Parameter 037:0034 ATT_850_CH_NBR_9

Descriptive nameAttenuated spare channel number

ModifiableNO

DescriptionThe parameter defines the spare channel number for 850MHz frequency in which the TX-power of the base station must be attenuated.

Default value(s)SX: 65280D

Allowed values0...65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10087 - SUPPORT FOR 850 FREQUENCIES

3.6.33 Parameter 037:0035 ATT_850_CH_NBR_10

Descriptive nameAttenuated second spare channel number

Page 143: 10

DN9979835 143

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

ModifiableNO

DescriptionThe parameter defines the second spare channel number for 850MHz frequency in which the TX-power of the base station must be attenuated.

Default value(s)SX: 65280D

Allowed values0...65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS10087 - SUPPORT FOR 850 FREQUENCIES

3.6.34 Parameter 037:0036 INC_SIGNAL_WAITING_TIME

Descriptive nameIncoming signal waiting time

ModifiableNO

DescriptionThis parameter defines incoming signal waiting time value for UltraSite and MetroSite BTSs.

Default value(s)SX: 0D

Allowed values

Increments1

Forbidden values

Value Meaning

255 indefinite

Page 144: 10

144 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DependenceDependence on other parameters does not exist.

FeatureBSS11073 - RECOVERY FOR BSS AND SITE SYNCH

3.6.35 Parameter 037:0037 ATTN_FOR_800_CH_6_ULTRA

Descriptive nameAttenuation value for UltraSite BTS

ModifiableNO

DescriptionMinimum TX-power attenuation of UltraSite BTS for attenuated channel number 6

Default value(s)SX: 16D

Allowed values0 - 65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11020 - OandM enhancements

3.6.36 Parameter 037:0038 ATTN_FOR_800_CH_7_ULTRA

Descriptive nameAttenuation value for UltraSite BTS

ModifiableNO

DescriptionMinimum TX-power attenuation of UltraSite BTS for attenuated channel number 7

Default value(s)SX: 12D

Allowed values0 - 65280D

Page 145: 10

DN9979835 145

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11020 - OandM enhancements

3.6.37 Parameter 037:0039 IUO_RECOVERY_NOT_DONE

Descriptive nameIUO_RECOVERY_NOT_DONE

ModifiableYES

DescriptionThis parameter defines how IUO recovery is handled by the BSC. If the value of this parameter is TRUE, then IUO recovery actions are prevented.

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS5310 - IUO improvements

3.6.38 Parameter 037:0040 MAX_BSC_TRE_SW_DL_COUNT

Descriptive nameBSC site maximum concurrent software downloading count

ModifiableYES

Value Meaning

FALSE IUO recovery is done.

TRUE IUO recovery is prevented.

Page 146: 10

146 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionThis parameter defines how many software downloadings can be active concurrently to BSC site.

Default value(s)SX: 3D

Allowed values1D-5D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS115166 - Transmission equipment SW DL improvement

3.6.39 Parameter 037:0041 MAX_BTS_TRE_SW_DL_COUNT

Descriptive nameBTS site maximum concurrent software downloading count

ModifiableYES

DescriptionThis parameter defines how many software downloadings can be active concurrently to BTS site.

Default value(s)SX: 100D

Allowed values1D-100D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS115166 - Transmission equipment SW DL improvement

3.6.40 Parameter 037:0042 SYNC_RECOV_ENABLED

Descriptive nameSYNC_RECOV_ENABLED

Page 147: 10

DN9979835 147

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

ModifiableYES

DescriptionThis parameter defines the automatic synchronisation recovery which is allowed to the BSS synchronisation from unsynchronised mode after the alarm 8048 has been can-celled if the abis synchronisation recovery functionality for the BCF chain is defined into use in the RNW database (BCF: CS=LAB).

Default value(s) SX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.6.41 Parameter 037:0043 LMUSYN_LOSS_ALARM_LIMIT

Descriptive nameLOSS OF LMU SYNCHRONISATION ALARM LIMIT

ModifiableYES

DescriptionThis parameter defines how long BCF(s) in the chain work(s) in abis synchronisation mode without setting of alarm 7788 LONG LOSS OF LMU SYNCHRONISATION. The value of the LMUSYN_LOSS_RESET_LIMIT / LMUSYN_LOSS_C_RESET_LIM parameter(s) shall be higher than the value of the LMUSYN LOSS ALARM LIMIT parameter.

Value Meaning

FALSE If abis synchronisation recovery functionality is defined into use and the BCF chain is not in BSS synchronisation, then nothing synchronisation recovery is not done in case of alarm 8048 cancel.

TRUE If abis synchronisation recovery functionality is defined into use and the BCF chain is not in BSS synchronisation, then BCF chain is recovered to BSS synchronisation automatic with BCF restarts in case of alarm 8048 cancel.

Page 148: 10

148 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s)SX: 1D

Allowed values0 - 36D

Forbidden values>36D

DependenceDependence on other parameters does not exist.

Feature -

3.6.42 Parameter 037:0044 LMUSYN_LOSS_RESET_LIMIT

Descriptive nameTIME LIMIT FOR ULTRASITE BCF RESTART DUE TO LOSS OF LMU SYNC

ModifiableYES

DescriptionThis parameter defines how long UltraSite BCF(s) in the chain work(s) in abis synchro-nisation mode without restarting the BCF(s) to work in unsynchronised mode. The value of the parameter shall be higher than the value of the LMUSYN_LOSS_ALARM_LIMIT parameter. Feature: BSS Synchronisation Recovery Improvement (BSS20371)

Default value(s)SX: 24D

Allowed values1D - 180D

Forbidden values0, >180D

DependenceDependence on other parameters does not exist.

Feature -

3.6.43 Parameter 037:0046 LMUSYN_LOSS_C_RESET_LIM

Descriptive nameTIME LIMIT FOR METROSITE BCF RESTART DUE TO LOSS OF LMU SYNC

Page 149: 10

DN9979835 149

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

ModifiableYES

DescriptionThis parameter defines how long MetroSite BCF(s) in the chain work(s) in abis synchro-nisation mode without restarting the BCF(s) to work in unsynchronised mode. The value of the parameter shall be higher than the value of the LMUSYN_LOSS_ALARM_LIMIT parameter. Feature: BSS Synchronisation Recovery Improvement (BSS20371).

Default value(s)SX: 3D

Allowed values1D - 180D

Forbidden values0, >180D

DependenceDependence on other parameters does not exist.

Feature -

3.7 Parameter class 038 MML_COMMAND_LOGDescriptive NameMML Command Log and Service Terminal Log parameters

DescriptionThe parameter class includes parameters defining timeout values and disk usage restrictions of the MML Command Log and Service Terminal Log.

3.7.1 Parameter 038:0000 WRITE_CACHE_TIMEOUT

Descriptive nameMML Command Log: write cache timeout

ModifiableYES

DescriptionThe parameter restricts the maximum time an MML command log record is kept in the internal write cache. Its minimum value is ten (10) seconds and maximum value is six hundred (600) seconds.

Default value(s)G: 60D

Page 150: 10

150 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Allowed values10D - 600D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature10498 - MML COMMAND LOG

3.7.2 Parameter 038:0001 STORAGE_LENGTH

Descriptive nameMML Command Log: storage length of log contents

ModifiableYES

DescriptionThe parameter defines the maximum time for keeping MML command log files on disks. The minimum value is three (3) days and the maximum value is thirty (30) days.

Default value(s)G: 30D

Allowed values3D - 30D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature10498 - MML COMMAND LOG

3.7.3 Parameter 038:0002 MAX_FILE_COUNT

Descriptive nameMML Command Log and Service Terminal Log: Maximum file count

ModifiableYES

Page 151: 10

DN9979835 151

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThe parameter defines the maximum number of MML command log files and service terminal log files on disks. The minimum value is five (5) and the maximum value is thirty thousand (30 000).

Default value(s)G: 30000D

Allowed values5D - 30000D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature10498 - MML COMMAND LOG

30314 - Service terminal log

50041 - Remote User Event Log Management

3.7.4 Parameter 038:0003 ADMINISTRATION_HOUR

Descriptive nameMML Command Log: Hour part of administration time

ModifiableYES

DescriptionIn this parameter the operator can define the hour part of the time which the administra-tion of MML command log is due.

Default value(s)G: 1D

Allowed values0D - 23D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature10498 - MML COMMAND LOG

Page 152: 10

152 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.7.5 Parameter 038:0004 ADMINISTRATION_MINUTES

Descriptive nameMML Command Log and Service Terminal Log: Minutes part of administration time

ModifiableYES

DescriptionWith this parameter the operator can define the minutes part of the time in which the administration of the MML command log and the service terminal log are due.

Default value(s)G: 25D

Allowed values0D - 59D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature10498 - MML COMMAND LOG

30314 - Service terminal log

50041 - Remote User Event Log Management

3.8 Parameter class 044 MML_SESSIONDescriptive NameMML Session parameters

DescriptionThis parameter class includes parameters concerning MML session.

3.8.1 Parameter 044:0000 PW_CHAR_TO_PRINT

Descriptive nameCharacter to be printed on terminal when entering password.

ModifiableYES

DescriptionThis parameter defines the character to be displayed on terminal when user enters the password.

Page 153: 10

DN9979835 153

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)G: 02AH

Allowed values0H, 07H, 020H - 07EH

Forbidden values

DependenceDependence on other parameters does not exist.

Feature30512 - MMI PASSWORD ENCRYPTION BASED ON PUBLIC ALGORITHMS

3.8.2 Parameter 044:0001 FIRST_MMI_LOGIN_DELAY

Descriptive nameFirst login delay in MMI User Identification.

ModifiableYES

DescriptionThe parameter defines the first delay bigger than zero that a user might notice when starting an MML session before getting the username and password request. At each step the delay is increased by doubling the previous value.

Default value(s)GX: 10D

Allowed values5D - 60D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature30711 - DELAY IN MMI USER IDENTIFICATION

31434 - Login delay to all session types

3.8.3 Parameter 044:0002 MAX_MMI_LOGIN_DELAY

Descriptive nameMaximum login delay in MMI User Identification.

Page 154: 10

154 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableYES

DescriptionThe parameter defines the maximum delay that a user might notice when starting an MML session before getting the username and password request.

Default value(s)GX: 1440D

Allowed values1D - 1440D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature30711 - DELAY IN MMI USER IDENTIFICATION

31434 - Login delay to all session types

3.8.4 Parameter 044:0003 OVERFLOW_LOGIN_DELAY

Descriptive nameOverflow login delay in MMI User Identification

ModifiableYES

DescriptionThe parameter defines the delay that a user might notice when starting an MML session before getting the username and password request. It is applied to those Telnet connec-tions which cannot use unique delay.

Default value(s)GX: 5D

Allowed values01D - 60D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature30711 - DELAY IN MMI USER IDENTIFICATION

Page 155: 10

DN9979835 155

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

31434 - Login delay to all session types

3.8.5 Parameter 044:0005 DISCLAIMER_TEXT

Descriptive nameActivation parameter for feature MMI Disclaimer Display

ModifiableYES

DescriptionUpon opening an MML session, the system may first display an informative disclaimer text. The contents of this disclaimer are defined by an administrator. The value of the parameter defines whether the feature is activated or not. When the feature is activated, the parameter defines the functionality of this feature.

Default value(s)GX: 0H

Allowed values0H, 01H, 02H

Forbidden values

DependenceDependence on other parameters does not exist.

Feature30941 - MMI DISCLAIMER DISPLAY

3.8.6 Parameter 044:0006 DEF_MAIN_HEADING_TEXT

Descriptive nameThe default NE name text used in main heading printout

ModifiableYES

DescriptionWith this parameter the end user can select if she wants the DX 200 in B series and IPA2800 in A series to be printed in the main heading, or if the real network element text according to the nw_elem_t type is fetched from DIPFIL and printed in the main heading.

Value Meaning

0H The feature is not activated.

01H The feature is activated without a confirmation request.

02H The feature is activated with a confirmation request.

Page 156: 10

156 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s) GX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature1332 - Traffic Measurement in MSC Server

3.9 Parameter class 046 PCU_TELECOM_PARAMETERSDescriptive NamePCU Telecom Parameters

DescriptionThe parameter class contains parameters related to PCU Telecom.

3.9.1 Parameter 046:0046 MEMORY_OUT_FLAG_SUM

Descriptive nameMemory out flag sum

ModifiableYES

DescriptionIf a mobile station having an EGPRS TBF in DL direction has not enough memory to perform Incremental Redundancy operations, it will indicate this to the network by setting the MS Out of Memory flag in the EGPRS Packet Downlink Ack/Nack message to the value of 1. If the PCU receives from the mobile station memory_out_of_flag_sum consecutive EGPRS Packet Downlink Ack/Nack messages having MS Out of Memory flag set to 1, then the MS Out of Memory condition is activated by the PCU. During the MS Out of Memory condition the PCU applies to the DL TBF a more robust MCS than suggested by the LA algorithm. The MS Out of Memory condition is cleared when the

Value Meaning

TRUE When application software calls the main_heading routine from OAMLIB, the default text DX 200 in B series and IPA2800 in A series is printed.

FALSE When application software calls the main_heading routine from OAMLIB, the real network element text according the nw_elem_t type is fetched from DIPFIL and printed.

Page 157: 10

DN9979835 157

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

PCU receives an EGPRS Packet Downlink Ack/Nack message having MS Out of Memory flag set to 0.

Default value(s)SX: 3D

Allowed values0-7D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.2 Parameter 046:0047 EGPRS_UPLINK_PENALTY

Descriptive nameEGPRS uplink penalty

ModifiableYES

DescriptionThe parameter is used by the RLC acknowledgement algorithm to determine how fre-quently Packet Uplink Ack/Nack messages are transmitted to the mobile station having a UL TBF in EGPRS mode. The PCU has a counter which is incremented by one whenever an RLC data block is received successfully. The counter is incremented by (1 EGPRS_UPLINK_PENALTY) whenever an RLC data block is received unsuccessfully. The acknowledgement message is triggered when the counter exceeds the threshold value of EGPRS_UPLINK_THRESHOLD. Separate parameters are applied to GPRS and EGPRS TBFs due to the differences in the RLC protocol operation, e.g. the RLC window size of an EGPRS TBF is larger than that of a GPRS TBF.

Default value(s)GX: 2D SX: 1D

Allowed values1D - 255D

Forbidden values

Value Meaning

0 Deactivates algorithm use.

Page 158: 10

158 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.3 Parameter 046:0048 EGPRS_UPLINK_THRESHOLD

Descriptive nameEGPRS uplink threshold

ModifiableYES

DescriptionThe parameter is used by the RLC acknowledgement algorithm to determine how fre-quently Packet Uplink Ack/Nack messages are transmitted to the mobile station having a UL TBF in EGPRS mode. The PCU has a counter which is incremented by one whenever an RLC data block is received successfully. The counter is incremented by (1 EGPRS_UPLINK_PENALTY) whenever an RLC data block is received unsuccessfully. The acknowledgement message is triggered when the counter exceeds the threshold value of EGPRS_UPLINK_THRESHOLD. Separate parameters are applied to GPRS and EGPRS TBFs due to the differences in the RLC protocol operation, e.g. the RLC window size of an EGPRS TBF is larger than that of a GPRS TBF.

Default value(s)GX: 84D SX: 25D

Allowed values1D - 255D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.4 Parameter 046:0049 EGPRS_DOWNLINK_PENALTY

Descriptive nameEGPRS downlink penalty

ModifiableYES

Page 159: 10

DN9979835 159

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThe parameter is used by the RLC acknowledgement algorithm to determine how fre-quently the PCU polls the mobile station having a DL TBF in EGPRS mode. The PCU has a counter, which is incremented by one whenever an RLC data block is transmitted for the first time or retransmitted pre-emptively. The counter is incremented by (1 EGPRS_DOWNLINK_PENALTY) whenever a negatively acknowledged RLC data block is retransmitted. The mobile station is polled when the counter exceeds the thresh-old value of EGPRS_DOWNLINK_THRESHOLD. Separate parameters are applied to GPRS and EGPRS TBFs due to the differences in the RLC protocol operation, e.g. the RLC window size of an EGPRS TBF is larger than that of a GPRS TBF.

Default value(s)GX: 2D SX: 1D

Allowed values1D - 255D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.5 Parameter 046:0050 EGPRS_DWNLINK_THRESHOLD

Descriptive nameEGPRS downlink threshold

ModifiableYES

DescriptionThe parameter is used by the RLC acknowledgement algorithm to determine how fre-quently the PCU polls the mobile station having a DL TBF in EGPRS mode. The PCU has a counter, which is incremented by one whenever an RLC data block is transmitted for the first time or retransmitted pre-emptively. The counter is incremented by (1 EGPRS_DOWNLINK_PENALTY) whenever a negatively acknowledged RLC data block is retransmitted. The mobile station is polled when the counter exceeds the thresh-old value of EGPRS_DOWNLINK_THRESHOLD. Separate parameters are applied to GPRS and EGPRS TBFs due to the differences in the RLC protocol operation, e.g. the RLC window size of an EGPRS TBF is larger than that of a GPRS TBF.

Default value(s)GX: 60D SX: 25D

Allowed values1D - 255D

Page 160: 10

160 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.6 Parameter 046:0051 GPRS_UPLINK_PENALTY

Descriptive nameGPRS uplink penalty

ModifiableYES

DescriptionThe parameter is used by the RLC acknowledgement algorithm to determine how fre-quently Packet Uplink Ack/Nack messages are transmitted to the mobile station having a UL TBF in GPRS mode. The PCU has a counter that is incremented by one whenever an RLC block is received successfully. The counter is incremented by (1 GPRS_UPLINK_PENALTY) whenever an RLC block is received unsuccessfully. The acknowledgement message is triggered when the counter exceeds the threshold value of GPRS_UPLINK_THRESHOLD.

Default value(s)SX: 3D

Allowed values1-255D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.7 Parameter 046:0052 GPRS_UPLINK_THRESHOLD

Descriptive nameGPRS uplink threshold

ModifiableYES

Page 161: 10

DN9979835 161

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThe parameter is used by the RLC acknowledgement algorithm to determine how fre-quently Packet Uplink Ack/Nack messages are transmitted to the mobile station having a UL TBF in GPRS mode. The PCU has a counter, which is incremented by one whenever an RLC block is received successfully. The counter is incremented by (1 GPRS_UPLINK_PENALTY) whenever an RLC block is received unsuccessfully. The acknowledgement message is triggered when the counter exceeds the threshold value of GPRS_UPLINK_THRESHOLD.

Default value(s)SX: 22D

Allowed values1-255D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.8 Parameter 046:0053 GPRS_DOWNLINK_PENALTY

Descriptive nameGPRS downlink parameters

ModifiableYES

DescriptionThe parameter is used by the RLC acknowledgement algorithm to determine how fre-quently the PCU polls the mobile station having a DL TBF in GPRS mode. The PCU has a counter, which is incremented by one whenever an RLC block is transmitted for the first time or retransmitted pre-emptively. The counter is incremented by (1 + GPRS_DOWNLINK_PENALTY) whenever a negatively acknowledged RLC block is retransmitted. The mobile station is polled when the counter exceeds the threshold value of GPRS_DOWNLINK_THRESHOLD.

Default value(s)SX: 2D

Allowed values1-255D

Forbidden values

Page 162: 10

162 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.9 Parameter 046:0054 GPRS_DOWNLINK_THRESHOLD

Descriptive nameGPRS downlink threshold

ModifiableYES

DescriptionThe parameter is used by the RLC acknowledgement algorithm to determine how fre-quently the PCU polls the mobile station having a DL TBF in GPRS mode. The PCU has a counter, which is incremented by one whenever an RLC block is transmitted for the first time or retransmitted pre-emptively. The counter is incremented by (1 + GPRS_DOWNLINK_PENALTY) whenever a negatively acknowledged RLC block is retransmitted. The mobile station is polled when the counter exceeds the threshold value of GPRS_DOWNLINK_THRESHOLD.

Default value(s)RX: 16D

Allowed values1-255D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.10 Parameter 046:0055 UPLNK_RX_LEV_FRG_FACTOR

Descriptive nameUplink Rx-level forgetting factor

ModifiableYES

DescriptionDuring TBF lifetime the PCU averages the uplink Rx-lev value as follows: Cn = (1-a) * Cn-1 a * Cblock n, where Cn is the new averaged value, Cn-1 is the old averaged value, Cblock n is the C-value of the block and a is the forgetting factor whose value is defined

Page 163: 10

DN9979835 163

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

by the UPLNK_RX_LEV_FRG_FACTOR parameter. If the average uplink Rx-lev value goes below the BTSs GPRS_non_BCCH_layer_rxlev_lower_limit parameter then the TBF is allocated to another BTS in the segment, if possible.

Default value(s)SX: 50D

Allowed values0-99D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.11 Parameter 046:0059 TERRIT_BALANCE_THRSHLD

Descriptive nameTerritory balance threshold

ModifiableYES

DescriptionThe relative difference between EGPRS and GPRS TBF count in a segment, which acti-vates the territory_balance_info_s message to the DX RRM. If there are GPRS and EGPRS territories within the same segment, then the PSWRRM may use the territory_balance_info_s message to indicate to the CSWRRM which type of territory (GPRS/EGPRS) could be subjected to the next downgrade territory operation. The ter-ritory type having the lowest load is indicated in this context. The territory_balance_info_s message is sent if the relative load difference between the GPRS and EGPRS territories is larger than the value of the territ_balance_thrshld parameter provided that the new territory_balance_info_s message indicates a different type of territory than the previously sent territory_balance_info_s message and that at least territ_upd_gtime_gprs seconds have passed from the last territory operation.

Default value(s)SX: 50D

Value Meaning

0 Deactivates algorithm use.

Value Meaning

0 Deactivates algorithm use.

Page 164: 10

164 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Allowed values0-99D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.12 Parameter 046:0060 TERRIT_UPD_GTIME_GPRS

Descriptive nameGPRS territory update guard time

ModifiableYES

DescriptionPR_NR_T_TERRIT_UPD_GTIME_GPRS Time in which territory_balance_info_s message must be sent to DXRRM. If there are GPRS and EGPRS territories within the same segment, then the PSWRRM may use the territory_balance_info_s message to indicate to the CSWRRM which type of territory (GPRS/EGPRS) could be subjected to the next downgrade territory operation. The territory type having the lowest load is indi-cated in this context. The territory_balance_info_s message is sent if the relative load difference between the GPRS and EGPRS territories is larger than the value of the territ_balance_thrshld parameter provided that the new territory_balance_info_s message indicates a different type of territory than the previously sent territory_balance_info_s message and that at least territ_upd_gtime_gprs seconds have passed from the last territory operation.

Default value(s)SX: 5D

Allowed values1-255D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

Page 165: 10

DN9979835 165

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.9.13 Parameter 046:0061 TBF_LOAD_GUARD_THRSHLD

Descriptive nameTBF load guard threshold

ModifiableYES

DescriptionThe parameter is used to prevent too frequent BTS load reallocation checks.

Default value(s)SX: 50D

Allowed values0-255D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.14 Parameter 046:0062 TBF_SIGNAL_GRD_THRSHLD

Descriptive nameTBF signal guard threshold

ModifiableYES

DescriptionThe parameter is used to prevent too frequent Rx-signal level reallocation checks.

Default value(s)SX: 5D

Allowed values0-255D

Value Meaning

0 Deactivates algorithm use.

Value Meaning

0 Deactivates algorithm use.

Page 166: 10

166 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.15 Parameter 046:0064 PRE_EMPTIVE_TRANSMISSIO

Descriptive namePre-emptive transmission

ModifiableYES

DescriptionThe parameter is used to activate or deactivate MS uplink pre-emptive transmission.

Default value(s) SX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.16 Parameter 046:0066 BCCH_BAND_TBF_THRSHLD

Descriptive nameBCCH band TBF threshold

ModifiableNO

Value Meaning

FALSE MS uplink pre-emptive transmission is activated.

TRUE MS uplink pre-emptive transmission is deactivated.

Page 167: 10

DN9979835 167

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionWhen the TBF allocations in the BCCH band exceed this threshold value, the new TBFs of MSS capable of using other bands are forced to be allocated to another band. The threshold value is a percentage of the maximum capacity of the BCCH band.

Default value(s)SX: 80D

Allowed values10-100D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.17 Parameter 046:0067 DL_TBF_RELEASE_DELAY

Descriptive nameDownlink temporary block flow release delay

ModifiableYES

DescriptionThis parameter is used to adjust the delay in downlink TBF release. An appropriate delay time increases the system performance, since the possibly following uplink TBF can be established faster, and frequent releases and re-establishments of downlink TBF can be avoided.

Default value(s)SX: 1000D

Allowed values100D - 5000D

Increments100

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

Page 168: 10

168 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.9.18 Parameter 046:0068 UL_TBF_RELEASE_DELAY

Descriptive nameUplink temporary block flow release delay

ModifiableYES

DescriptionThis parameter is used to adjust the delay in uplink TBF release. An appropriate delay time increases the system performance, since the possibly following downlink TBF can be established faster. This parameter is used with mobile stations not supporting Extended UL TBF Mode (or support not known).

Default value(s)GX: 1000D SX: 500D

Allowed values100D - 3000D

Increments100

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.9.19 Parameter 046:0071 UL_TBF_REL_DELAY_EXT

Descriptive nameUplink TBF release delay in extended mode

ModifiableYES

DescriptionThis parameter defines the uplink TBF release delay time for mobile stations supporting the Extended UL TBF Mode. (Note that in some cases PCU does not know whether the mobile station supports Extended UL TBF Mode or not. In this case the old parameter, UL TBF release delay, defines the delay time.)

Default value(s)SX: 1000D

Allowed values300D - 3000D

Page 169: 10

DN9979835 169

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Increments100

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11151 - Extended uplink TBF mode

3.9.20 Parameter 046:0072 UL_TBF_SCHED_RATE_EXT

Descriptive nameUplink TBF scheduling rate in extended mode release delay

ModifiableYES

DescriptionThis parameter defines how often a USF is scheduled for the MS during the inactivity period in Extended UL TBF Mode. Parameter value unit is 20 ms (block period). For example, value 4 means 80 ms (4 block periods).

Default value(s)SX: 4D

Allowed values2D - 50D

Increments1

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11151 - Extended uplink TBF mode

3.9.21 Parameter 046:0085 POLLING_INTERVAL_STRM

Descriptive namePOLLING INTERVAL STRM

ModifiableYES

Page 170: 10

170 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionThis parameter defines during delayed downlink TBF release, the mobile is polled time to time, depending on the most demanding delay requirement of the PFCs sharing the TBF. During delayed uplink TBF release, the USFs are scheduled to the mobile time to time, based on the same delay value.

Default value(s)SX: 4D

Allowed values1D-100D

Increments20

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11111 - Enhanced Quality of Service

3.9.22 Parameter 046:0086 POLLING_INTERVAL_IA

Descriptive namePOLLING INTERVAL IA

ModifiableYES

DescriptionThis parameter defines during delayed downlink TBF release, the mobile is polled time to time, depending on the most demanding delay requirement of the PFCs sharing the TBF. During delayed uplink TBF release, the USFs are scheduled to the mobile time to time, based on the same delay value.

Default value(s)SX: 4D

Allowed values1D-100D

Increments20

Forbidden values

Page 171: 10

DN9979835 171

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DependenceDependence on other parameters does not exist.

FeatureBSS11111 - Enhanced Quality of Service

3.9.23 Parameter 046:0087 POLLING_INTERVAL_BG

Descriptive namePOLLING INTERVAL BG

ModifiableYES

DescriptionThis parameter defines during delayed downlink TBF release, the mobile is polled from time to time, depending on the most demanding delay requirement of the PFCs sharing the TBF. During delayed uplink TBF release, the USFs are scheduled to the mobile from time to time, based on the same delay value.

Default value(s)SX: 4D

Allowed values1D-100D

Increments20

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11111 - Enhanced Quality of Service

3.9.24 Parameter 046:0090 PFC_PFT_LEGACY_STRM

Descriptive namePFC PFT LEGACY STRM

ModifiableYES

DescriptionThis parameter defines Packet Flow Timer (PFT) for Legacy Streaming PFCs.

Page 172: 10

172 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s)SX: 2D

Allowed values0D-60D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11111 - Enhanced Quality of Service

3.9.25 Parameter 046:0091 EGPRS_GPRS_MUX_PENALTY

Descriptive nameEGPRS GPRS MUX PENALTY

ModifiableYES

DescriptionThis parameter defines the multiplexing penalty that is added to the load of a channel having DL EGPRS TBFs when searching resources for an UL GPRS TBF.

Default value(s)SX: 25D

Allowed values0D-100D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11111 - Enhanced Quality of Service

3.9.26 Parameter 046:0092 GPRS_UL_MUX_DEC_FACTOR

Descriptive nameGPRS UL MUX DEC FACTOR

ModifiableYES

Page 173: 10

DN9979835 173

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThis parameter defines the estimate used by Admission Control and Channel Allocation for the reduction of UL GPRS throughput when using USF granularity 4.

Default value(s)SX: 10D

Allowed values0D-100D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11111 - Enhanced Quality of Service

3.9.27 Parameter 046:0093 EGPRS_DL_MUX_DEC_FACTOR

Descriptive nameEGPRS DL MUX DEC FACTOR

ModifiableYES

DescriptionThis parameter defines the estimate used by Admission Control and Channel Allocation for the reduction of DL EGPRS throughput when UL GPRS TBFs are allocated on the same timeslots.

Default value(s)SX: 15D

Allowed values0D-100D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBss11111 - Enhanced Quality of Service

Page 174: 10

174 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.9.28 Parameter 046:0096 NCCR_NON_DRX_PERIOD

Descriptive nameNCCR Non DRX Period

ModifiableYES

DescriptionThis parameter defines how to set the parameter NC_NON_DRX_PERIOD sent to the MS. NC_NON_DRX_PERIOD indicates the minimum time the MS shall stay in non-DRX mode after a measurement report has been sent. The NCCR Non DRX Period should be set long enough. In case the MS has left Non DRX period, it will not receive the PACKET CELL CHANGE ORDER.

Default value(s)SX: 4D

Allowed values0-7

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.9.29 Parameter 046:0097 NCCR_MEAS_REPORT_TYPE

Descriptive nameNCCR measurement report type

ModifiableYES

Value Meaning

0 No non-DRX mode

1 0.24 s

2 0.48 s

3 0.72 s

4 0.96 s

5 1.20 s

6 1.44 s

7 1.92 s

Page 175: 10

DN9979835 175

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThis parameter defines the REPORT TYPE parameter value in SI2quater, PSI5, and PACKET MEASUREMENT ORDER messages. Although support of PACKET ENHANCED MEASUREMENT REPORT is mandatory for the 3GPP release 99, MS vendors have not had the possibility to test the MSS in real networks and thus the old MSS may not work properly when commanded to send PACKET ENHANCED MEA-SUREMENT REPORT messages.

Default value(s) SX: 1 (T)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.9.30 Parameter 046:0099 SUSPEND_PCU_LOAD_NOTIF

Descriptive namePCU Load Notification lifetime

ModifiableYES

DescriptionThis parameter defines the lifetime of the PCU Load Notification. If the parameter has value 0xFF (255), the PCU Load Notification is suspended. Other values (0x00 .. 0xFE) define the lifetime of the notification in seconds, 0..254 seconds.

Default value(s)SX: 0FFH

Allowed values000H-0FFH

Value Meaning

F (0) 0 = MS shall use PACKET ENHANCED MEASUREMENT REPORT when applicable

T (1) 1 = MS shall use PACKET MEASUREMENT REPORT

Value Meaning

0FFH PCU Load Notification is suspended.

Page 176: 10

176 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS115167 - PCU Memory Overload Protection and Capacity Enhancements

3.9.31 Parameter 046:0100 CHA_CONC_UL_TBF_FAV_DIR

Descriptive nameCHA_CONC_UL_TBF_FAVOR_DIR

ModifiableYES

DescriptionThis parameter defines which direction is favoured when establishing a concurrent UL TBF. Depending on traffic profile, operator may favour DL, favour UL or share resources more evenly between the directions. Parameter value share resources is added in S12. - 0D, UL direction is favoured when establishing concurrent UL TBF (DL TBF exists). - 1D, DL direction is favoured when establishing concurrent UL TBF (DL TBF exists). - 2D, resources are shared when establishing concurrent UL TBF (DL TBF exists). Note that in PCU1 share resources value is interpreted as favour UL.

Default value(s)SX: 1D

Allowed values0D-2D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureCR69 S11.5 - PRFILE parameters for concurrent TBF establishing

BSS20089 BSS20084 - Extended Dynamic Allocation and High Multislot Classes

Value Meaning

0D 0D, UL direction is favoured when establishing concurrent UL TBF (DL TBF exists)

1D 1D, DL direction is favoured when establishing concurrent UL TBF (DL TBF exists)

2D 2D, resources are shared when establishing concurrent UL TBF (DL TBF exists)

Page 177: 10

DN9979835 177

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.9.32 Parameter 046:0101 CHA_CONC_DL_TBF_FAV_DIR

Descriptive nameCHA_CONC_DL_TBF_FAVOR_DIR

ModifiableYES

DescriptionThis parameter defines which direction is favoured when establishing a concurrent DL TBF. Depending on traffic profile, operator may favour DL, favour UL or share resources more evenly between the directions. Parameter value share resources is added in S12. - 0D, UL direction is favoured when establishing concurrent DL TBF (UL TBF exists). - 1D, DL direction is favoured when establishing concurrent DL TBF (UL TBF exists). - 2D, resources are shared when establishing concurrent DL TBF (UL TBF exists). Note that in PCU1 share resources value is interpreted as favour UL.

Default value(s)SX: 1D

Allowed values0D-2D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureCR69 S11.5 - PRFILE parameters for concurrent TBF establishing

BSS20089 BSS20084 - Extended Dynamic Allocation and High Multislot Classes

3.9.33 Parameter 046:0102 PFC_PFT_MAX_NRT

Descriptive namePFC_PFT_MAX_NRT

ModifiableYES

Value Meaning

0D 0D, UL direction is favoured when establishing concurrent DL TBF (UL TBF exists)

1D 1D, DL direction is favoured when establishing concurrent DL TBF (UL TBF exists)

2D 2D, resources are shared when establishing concurrent DL TBF (UL TBF exists)

Page 178: 10

178 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionThis parameter defines the maximum time accepted for a Packet Flow Timer (PFT) during a BSS Packet Context Creation or Modification procedure. A PFT timer indicates the maximum time that the BSS may store the non-Real Time BSS packet flow context. The PFT timer is started when the BSS packet flow context is stored in the BSS and when an LLC frame is received from the MS. When the BSS packet flow timer expires, the BSS shall delete the BSS packet flow context.

Default value(s)SX: 44D

Allowed values1D-111600D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS11111 - Enhanced Quality of Service

3.9.34 Parameter 046:0103 PFC_PFT_MAX_RT

Descriptive namePFC_PFT_MAX_RT

ModifiableYES

DescriptionThis parameter defines the maximum time accepted for a Packet Flow Timer (PFT) during a BSS Packet Context Creation or Modification procedure. A PFT timer indicates the maximum time that the BSS may store the Real Time BSS packet flow context. The PFT timer is started when the BSS packet flow context is stored in the BSS and when an LLC frame is received from the MS. When the BSS packet flow timer expires, the BSS shall delete the BSS packet flow context.

Default value(s)SX: 5D

Allowed values1D-111600D

Forbidden values

DependenceDependence on other parameters does not exist.

Page 179: 10

DN9979835 179

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

FeatureBSS11111 - Enhanced Quality of Service

3.9.35 Parameter 046:0105 DTM_CALL_ASSIGN_TIMER

Descriptive nameDTM call assignment timer

ModifiableYES

DescriptionThis parameter defines the length for a timer that is used to supervise the DTM call establishment procedure at the PCU. The value of this parameter is larger than the value of the timer T3107. The DTM call assignment is successful when the PCU receives a valid RLC/MAC block from the mobile. The timer is then stopped. The DTM call assign-ment is unsuccessful when the supervising timer expires. The assigned TBF is then abnormally released.

Default value(s)SX: 7D

Allowed values1D-10D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20088 - DUAL TRANSFER MODE

3.9.36 Parameter 046:0106 MAX_LAPD_LENGHT

Descriptive nameMaximum LAPD message length

ModifiableYES

DescriptionThis parameter defines the maximum length for a GTTP message. ABI converts the MAX_LAPD_LENGTH parameter value to bytes by using the formula MAX_LAPD_LENGTH * 18 8.

Default value(s)SX: 10D

Page 180: 10

180 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Allowed values5D-12D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20088 - Dual Transfer Mode

3.9.37 Parameter 046:0107 DTM_MS_CL_11_SUPP_EDA

Descriptive nameDTM Multislot Class 11 mobile extended dynamic allocation mode support

ModifiableYES

DescriptionThis parameter determines whether the PCU is allowed to assume that a DTM Multislot Class 11 mobile supports extended dynamic allocation mode.The assumption is possible because the only difference between the capabilities of DTM Multislot Class 9 and DTM Multislot Class 11 is the configuration that requires EDA for operation.With this assumption the PCU is able to allocate 2 UL PS timeslots for a DTM Multislot Class 11 at the MO DTM call establishment if EDA is supported in the network.Note that in the MO DTM call establishment there is no explicit indication available about the mobiles EDA capability.

Default value(s) SX: 1 (T)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20088 - Dual Transfer Mode

Value Meaning

T (1) PCU is allowed to assume that a DTM Multislot Class 11 mobile supports extended dynamic allocation mode.

F (0) PCU is not allowed to assume that a DTM Multislot Class 11 mobile supports extended dynamic allocation mode.

Page 181: 10

DN9979835 181

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.9.38 Parameter 046:0109 IBNACC_POLLING_TIME

Descriptive nameIBNACC polling time

ModifiableYES

DescriptionThis parameter defines the time interval, used by the IBNACC feature to resend any BSSGP message towards another BSS in cases when no response has been received from the BSS.

Default value(s)SX: 5D

Allowed values1D-30D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20083 - Inter-BSC Network Assisted Cell Change

3.9.39 Parameter 046:0110 LBNCCR_MIN_INTERVAL_PLR

Descriptive nameLBNCCR Minimum Interval Between PS Load Reports

ModifiableYES

DescriptionThis parameter defines the minimum interval time value, which is needed between con-secutive PS load report sendings from the same cell.

Default value(s)SX: 7D

Allowed values4D-15D

Forbidden values

DependenceDependence on other parameters does not exist.

Page 182: 10

182 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

FeatureBSS20087 - Load Balancing with NCCR

3.9.40 Parameter 046:0111 QOS_UPGRADE_TIME

Descriptive nameQoS upgrade time

ModifiableYES

DescriptionThis parameter defines supervision time, how long BSS PFC shall be served with undis-turbed QoS, before trying AC with the original QoS parameters. The parameter value 0 means that feature is off.

Default value(s)SX: 0D

Allowed values0D-1000D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20112 - QOS Upgrade to Originally Requested Level

3.9.41 Parameter 046:0113 POLLING_INTERVAL_BG_LOW

Descriptive namePOLLING INTERVAL BG LOW

ModifiableYES

DescriptionThis parameter defines the alternative polling interval for Background class traffic. This value is used in scheduling instead of POLLING INTERVAL BG when the traffic intensity is low and there is no TSL sharing.

Value Meaning

0D 0D, means that feature is off

1D-1000D 1D-1000D, means block periods. One block is 20 ms.

Page 183: 10

DN9979835 183

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)SX: 1D

Allowed values1D-100D

Increments20

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20966 - Dynamic Extended UL TBF Scheduling

3.9.42 Parameter 046:0114 POLLING_INTERVAL_IA_LOW

Descriptive namePOLLING INTERVAL IA LOW

ModifiableYES

DescriptionThis parameter defines the alternative polling interval for Interactive class traffic. This value is used in scheduling instead of POLLING INTERVAL IA when the traffic intensity is low and there is no TSL sharing.

Default value(s)SX: 1D

Allowed values1D-100D

Increments20

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20966 - Dynamic Extended UL TBF Scheduling

Page 184: 10

184 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.9.43 Parameter 046:0115 POLLING_INTERVAL_ST_LOW

Descriptive namePOLLING INTERVAL ST LOW

ModifiableYES

DescriptionThis parameter defines the alternative polling interval for Streaming class traffic. This value is used in scheduling instead of POLLING INTERVAL STRM when the traffic intensity is low and there is no TSL sharing.

Default value(s)SX: 1D

Allowed values1D-100D

Increments20

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20966 - Dynamic Extended UL TBF Scheduling

3.9.44 Parameter 046:0116 DL_DTM_TBF_REL_DELAY

Descriptive nameDownlink temporary block flow release delay for DTM call

ModifiableYES

DescriptionThis parameter defines the delay in downlink TBF release during a DTM call. An appro-priate delay time increases the system performance because the possibly following downlink data packet can be transmitted within the same TBF, and frequent releases and re-establishments of DTM call can thus be avoided.

Default value(s)SX: 4000D

Allowed values100D - 5000D

Page 185: 10

DN9979835 185

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Increments100

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20088 - Dual Transfer Mode

3.9.45 Parameter 046:0117 UL_DTM_TBF_RELDELAY_EXT

Descriptive nameUplink TBF release delay for DTM call in extended mode

ModifiableYES

DescriptionThis parameter defines the uplink TBF release delay time during a DTM call when the Extended UL TBF Mode is used. (Note that in some cases PCU does not know whether the mobile station supports Extended UL TBF Mode or not. In this case the other param-eter, UL_DTM_TBF_REL_DELAY, defines the delay time.) An appropriate delay time increases the system performance, because the possibly following uplink data packet can be transmitted within the same TBF, and frequent releases and re-establishments of DTM call can thus be avoided.

Default value(s)SX: 5000D

Allowed values300D - 10000D

Increments100

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20088 - Dual Transfer Mode

Page 186: 10

186 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.9.46 Parameter 046:0118 UL_DTM_TBF_REL_DELAY

Descriptive nameUplink temporary block flow release delay for DTM call

ModifiableYES

DescriptionThis parameter is used to adjust the delay in uplink TBF release during a DTM call. An appropriate delay time increases the system performance, because the possibly follow-ing downlink TBF can be established beside the existing UL TBF, and frequent releases and re-establishments of DTM call can thus be avoided . This parameter is used with mobile stations not supporting Extended UL TBF Mode (or support not known).

Default value(s)SX: 2000D

Allowed values100D - 4000D

Increments100

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20088 - Dual Transfer Mode

3.9.47 Parameter 046:0119 RESEGMENT_MODE

Descriptive nameResegment mode selector

ModifiableYES

DescriptionThis parameter is used for selecting the approach to the subject matter.

Value Meaning

0 0 : Never

1 1 : Normal

2 2 : Always

Page 187: 10

DN9979835 187

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)SX: 1D

Allowed values0D - 2D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20459 - Robust EDGE Retransmission

3.9.48 Parameter 046:0123 PCU_COLD_RST_ALLOWED

Descriptive namePCU cold restart due the fault by recovery system

ModifiableYES

DescriptionThe parameter is for allowing PCU cold restart as a recovery function instead of forced BCSU switchover.

Default value(s)GX: 00H (FALSE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature30796 - Supervision of Preprocessors

Value Meaning

FALSE PCU cold restart is not allowed.

TRUE PCU cold restart is allowed.

Table 4

Page 188: 10

188 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.9.49 Parameter 046:0126 BTS_DLDC_TSL_BALANC_THR

Descriptive nameBTS DLDC TSL BALANCE THRESHOLD

ModifiableYES

DescriptionDefines the threshold for triggering an intra-BTS reallocation for a single carrier DL TBF when DLDC resources are available within the BTS.

Default value(s)SX: 100D

Allowed values

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10 Parameter class 049 GB_INTERFACEDescriptive NameGb interface parameters in BSC

DescriptionThe parameter class contains parameters related to Gb interface.

3.10.1 Parameter 049:0000 TNS_BLOCK

Descriptive nameNS level block timer

ModifiableYES

DescriptionThe parameter guards the blocking and unblocking procedures.

Default value(s)SX: 300D

Page 189: 10

DN9979835 189

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Allowed values100D-12000D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.2 Parameter 049:0001 TNS_RESET

Descriptive nameTimer for NS level reset

ModifiableYES

DescriptionThe parameter guards the reset procedure.

Default value(s)SX: 300D

Allowed values100D-12000D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.3 Parameter 049:0002 TNS_TEST

Descriptive nameTimer for NS level test

ModifiableYES

DescriptionThe parameter defines the periodicity of the test procedure.

Page 190: 10

190 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s)SX: 500D

Allowed values100D-6000D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.4 Parameter 049:0003 TNS_ALIVE

Descriptive nameTimer for NS level alive procedure

ModifiableYES

DescriptionThe parameter guards the NS_VC test procedure.

Default value(s)SX: 300D

Allowed values100D-6000D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.5 Parameter 049:0005 NS_BLOCK_RETRIES

Descriptive nameNS block retries

ModifiableYES

Page 191: 10

DN9979835 191

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThis parameter defines how many times NS level block is retried.

Default value(s)SX: 3D

Allowed values0D-255D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.6 Parameter 049:0006 NS_UNBLOCK_RETRIES

Descriptive nameNS unblock retries

ModifiableYES

DescriptionThe parameter determines how many times the NS level unblock procedure is retried.

Default value(s)SX: 3D

Allowed values0D-255D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.7 Parameter 049:0007 NS_ALIVE_RETRIES

Descriptive nameNS alive retries

Page 192: 10

192 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableYES

DescriptionThis parameter defines how many times the NS level alive procedure is retried.

Default value(s)SX: 10D

Allowed values0D - 255D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.8 Parameter 049:0008 NS_RESET_RETRIES

Descriptive nameNS reset retries

ModifiableYES

DescriptionThis parameter defines how many times the NS level reset procedure is retried.

Default value(s)SX: 255D

Allowed values0D-65820D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

Value Meaning

255 infinity

Page 193: 10

DN9979835 193

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.10.9 Parameter 049:0009 TGB_BLOCK

Descriptive nameTimer of GB block

ModifiableYES

DescriptionThe parameter guards the (un)blocking procedures.

Default value(s)SX: 300D

Allowed values100D-3000D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.10 Parameter 049:0010 TGB_RESET

Descriptive nameTimer for Gb reset

ModifiableYES

DescriptionThe parameter guards the reset procedure of the Gb interface.

Default value(s)SX: 300D

Allowed values100D-12000D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

Page 194: 10

194 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.10.11 Parameter 049:0011 TGB_SUSPEND

Descriptive nameTimer for Gb suspend

ModifiableYES

DescriptionThis parameter defines the supervision time for a suspend procedure of the Gb inter-face.

Default value(s)SX: 60D

Allowed values10D-1000D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.12 Parameter 049:0013 BVC_BLOCK_RETRIES

Descriptive nameBVC block retries

ModifiableYES

DescriptionThis parameter defines how many times the BVC block procedure is retried.

Default value(s)SX: 3D

Allowed values1D-100D

Forbidden values

DependenceDependence on other parameters does not exist.

Page 195: 10

DN9979835 195

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.13 Parameter 049:0014 BVC_UNBLOCK_RETRIES

Descriptive nameBVC unblock retries

ModifiableYES

DescriptionThis parameter defines how many times the BVC unblock procedure is retried.

Default value(s)SX: 3D

Allowed values1D-100D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.14 Parameter 049:0015 BVC_RESET_RETRIES

Descriptive nameBVC reset retries

ModifiableYES

DescriptionThis parameter defines how many times BVC reset procedure is retried.

Default value(s)SX: 3D

Allowed values1D-100D

Forbidden values

Page 196: 10

196 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.15 Parameter 049:0016 SUSPEND_RETRIES

Descriptive nameSuspend retries

ModifiableYES

DescriptionThis parameter defines how many times the suspend procedure is retried in the BSSGB interface.

Default value(s)SX: 3D

Allowed values1D-100D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.16 Parameter 049:0020 FC_R_DIF_TRG_LIMIT

Descriptive nameR_dif limit value

ModifiableYES

DescriptionThe limit value for r_dif that triggers a flow control message (r_dif>0.1).

Default value(s)SX: 100D

Allowed values0-1000D

Page 197: 10

DN9979835 197

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.17 Parameter 049:0021 FC_MS_R_DEF

Descriptive nameMS-specific leak rate default value

ModifiableYES

DescriptionThis parameter defines the default value for MS-specific leak rate parameter (in bytes).

Default value(s)GX: 3000D SX: 4500D

Allowed values1000-65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.18 Parameter 049:0022 FC_MS_R_DEF_EGPRS

Descriptive nameMS-specific leak rate default value for EGPRS

ModifiableYES

DescriptionThis parameter defines the default value for MS-specific leak rate. This may be used for EGPRS capable MSes. The value is given in Bytes/s.

Default value(s)SX: 15000D

Page 198: 10

198 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Allowed values1000-65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.19 Parameter 049:0023 FC_MS_R_MIN

Descriptive nameMinimum value of MS leak rate

ModifiableYES

DescriptionMinimum value of leak rate for MS. If flow control calculations produce smaller value, fc_ms_r_min is sent to SGSN instead. (40 B/s)

Default value(s)SX: 40D

Allowed values20D - 200D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.20 Parameter 049:0024 FC_MS_B_MAX_DEF

Descriptive nameBuffering capacity default value

ModifiableYES

DescriptionThis parameter defines the default value for MS-specific buffering capacity (in bytes).

Page 199: 10

DN9979835 199

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)GX: 5000D SX: 10000D

Allowed values2000-65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.21 Parameter 049:0025 FC_MS_B_MAX_DEF_EGPRS

Descriptive nameBuffering capacity default value

ModifiableYES

DescriptionThis parameter defines the default value for MS-specific buffering capacity. This may be used for EGPRS capable MSes. (5 kB).

Default value(s)SX: 25000D

Allowed values2000-65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.22 Parameter 049:0026 FC_R_TSL

Descriptive nameGPRS timeslot transmission capacity

ModifiableYES

Page 200: 10

200 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DescriptionThis parameter defines the transmission capacity of one GPRS timeslot in Bytes/s.

Default value(s)SX: 1500D

Allowed values1000-65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.23 Parameter 049:0027 FC_R_TSL_EGPRS

Descriptive nameEGPRS timeslot transmission capacity

ModifiableYES

DescriptionThis parameter defines the transmission capacity of one EGPRS timeslot. This param-eter is used instead of fc_r_tsl, if the segment has EGPRS capability (given in Bytes/s).

Default value(s)SX: 4500D

Allowed values1000-65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.24 Parameter 049:0028 FC_B_MAX_TSL

Descriptive nameGPRS timeslot buffering capacity

Page 201: 10

DN9979835 201

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

ModifiableYES

DescriptionBuffering capacity of one GPRS timeslot. (25 kB)

Default value(s)SX: 25000D

Allowed values5000-65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.25 Parameter 049:0029 FC_B_MAX_TSL_EGPRS

Descriptive nameEGPRS timeslot buffering capacity

ModifiableYES

DescriptionBuffering capacity of one EGPRS timeslot. This parameter is used instead of fc_b_max_tsl, if the segment has EGPRS capability. (25 kB)

Default value(s)SX: 25000D

Allowed values5000-65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

Page 202: 10

202 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.10.26 Parameter 049:0031 TSNS_PROV

Descriptive nameTimer for sub-network service procedures

ModifiableYES

DescriptionThis parameter defines the time for a timer that guards the sub-network service proce-dures.

Default value(s)SX: 3D

Allowed values1-10D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.27 Parameter 049:0032 SNS_ADD_RETRIES

Descriptive nameSub-network service add retries

ModifiableYES

DescriptionThis parameter defines the number of retries for sending SNS-ADD PDU.

Default value(s)SX: 3D

Allowed values1-65280D

Forbidden values

DependenceDependence on other parameters does not exist.

Page 203: 10

DN9979835 203

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

FeatureBSS9006 - PCU&GB

3.10.28 Parameter 049:0033 SNS_CONFIG_RETRIES

Descriptive nameSub-network service config retries

ModifiableYES

DescriptionThis parameter defines the number of retries for sending SNS-CONFIG PDU.

Default value(s)SX: 3D

Allowed values1-65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.29 Parameter 049:0034 SNS_CHANGEWEIGHTS_RETRI

Descriptive nameSub-network service changeweights retries

ModifiableYES

DescriptionThis parameter defines the number of retries for sending SNS-CHANGEWEIGHTS PDU.

Default value(s)SX: 3D

Allowed values1-65280D

Forbidden values

Page 204: 10

204 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.30 Parameter 049:0035 SNS_DELETE_RETRIES

Descriptive nameSub-network service delete retries

ModifiableYES

DescriptionThis parameter defines the number of retries for sending SNS-DELETE PDU.

Default value(s)SX: 3D

Allowed values1-65280D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.31 Parameter 049:0036 SNS_SIZE_RETRIES

Descriptive nameSub-network service size retries

ModifiableYES

DescriptionThis parameter defines the number of retries for sending SNS-SIZE PDU before an alarm is raised. The size procedure will continue until SGSN responds to the message.

Default value(s)SX: 10D

Allowed values1-65280D

Page 205: 10

DN9979835 205

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - PCU&GB

3.10.32 Parameter 049:0037 TGB_RAC_UPDATE

Descriptive nameTGB RAC UPDATE

ModifiableYES

DescriptionThis parameter defines timer used in the Radio Access Capability Update (RA-CAPA-BILITY-UPDATE) procedure. The timer is referred as T5 in 3GPP 48.018.

Default value(s)SX: 3D

Allowed values1D-30D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.33 Parameter 049:0038 RAC_UPDATE_RETRIES

Descriptive nameRAC UPDATE RETRIES

ModifiableYES

DescriptionThis parameter defines how many times the Radio Access Capability (RA-CAPABILITY-UPDATE) procedure is retried.

Default value(s)SX: 3D

Page 206: 10

206 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Allowed values1D-100D

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.34 Parameter 049:0052 CONVERSATIONAL_ARP1

Descriptive namePriority class conversational and traffic class 1

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 46D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.35 Parameter 049:0053 CONVERSATIONAL_ARP2

Descriptive namePriority class conversational and traffic class 2

ModifiableYES

Page 207: 10

DN9979835 207

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 44D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.36 Parameter 049:0054 CONVERSATIONAL_ARP3

Descriptive namePriority class conversational and traffic class 3

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 42D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

Page 208: 10

208 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.10.37 Parameter 049:0055 STREAMING_ARP1

Descriptive namePriority class streaming and traffic class 1

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 38D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.38 Parameter 049:0056 STREAMING_ARP2

Descriptive namePriority class streaming and traffic class 2

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 36D

Allowed values0D-62D

Increments2

Page 209: 10

DN9979835 209

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.39 Parameter 049:0057 STREAMING_ARP3

Descriptive namePriority class streaming and traffic class 3

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 34D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.40 Parameter 049:0058 INTERACT_PRIOR_1_ARP1

Descriptive namePriority class interactive 1 and traffic class 1

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Page 210: 10

210 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s): 30D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.41 Parameter 049:0059 INTERACT_PRIOR_1_ARP2

Descriptive namePriority class interactive 1 and traffic class 2

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 28D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

Page 211: 10

DN9979835 211

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.10.42 Parameter 049:0060 INTERACT_PRIOR_1_ARP3

Descriptive namePriority class interactive 1 and traffic class 3

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 26D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.43 Parameter 049:0061 INTERACT_PRIOR_2_ARP1

Descriptive namePriority class interactive 2 and traffic class 1

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 22D

Allowed values0D-62D

Increments2

Page 212: 10

212 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.44 Parameter 049:0062 INTERACT_PRIOR_2_ARP2

Descriptive namePriority class interactive 2 and traffic class 2

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 20D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.45 Parameter 049:0063 INTERACT_PRIOR_2_ARP3

Descriptive namePriority class interactive 2 and traffic class 3

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Page 213: 10

DN9979835 213

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)SX: 18D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.46 Parameter 049:0064 INTERACT_PRIOR_3_ARP1

Descriptive namePriority class interactive 3 and traffic class 1

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 14D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

Page 214: 10

214 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

3.10.47 Parameter 049:0065 INTERACT_PRIOR_3_ARP2

Descriptive namePriority class interactive 3 and traffic class 2

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 12D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.48 Parameter 049:0066 INTERACT_PRIOR_3_ARP3

Descriptive namePriority class interactive 3 and traffic class 3

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 10D

Allowed values0D-62D

Increments2

Page 215: 10

DN9979835 215

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.49 Parameter 049:0067 BACKGROUND_ARP1

Descriptive namePriority class background and traffic class 1

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 4D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.50 Parameter 049:0068 BACKGROUND_ARP2

Descriptive namePriority class background and traffic class 2

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Page 216: 10

216 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s)SX: 2D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.10.51 Parameter 049:0069 BACKGROUND_ARP3

Descriptive namePriority class background and traffic class 3

ModifiableYES

DescriptionThis parameter defines how the IP header DSCP bits are mapped to EQoS traffic and priority classes.

Default value(s)SX: 0D

Allowed values0D-62D

Increments2

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

Page 217: 10

DN9979835 217

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.10.52 Parameter 049:0072 RESUME_RETRIES

Descriptive nameResume retries

ModifiableYES

DescriptionThis parameter defines how many times the resume procedure is retried in the BSSGB interface.

Default value(s)SX: 1D

Allowed values1D-100D

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.53 Parameter 049:0073 TGB_RESUME

Descriptive nameTimer for Gb resume

ModifiableYES

DescriptionThis parameter defines the resume procedure of the Gb interface.

Default value(s)SX: 20D

Allowed values0D-1000D

Forbidden values

DependenceDependence on other parameters does not exist.

Page 218: 10

218 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

FeatureBSS9006 - GPRS RNW MANAGEMENT

3.10.54 Parameter 049:0082 PS_NULL_NRI_SUPPORT

Descriptive namePS_NULL_NRI support

ModifiableYES

DescriptionThis parameter defines whether null NRI support is enabled in the BSC. If this parameter and Multipoint Gb licence are activated, null NRI is visible and can be edited by the operator (MML command FXF).

Default value(s) SX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

FeatureBSS20086 - MULTIPOINT GB

3.11 Parameter class 050 REPORT_FORMINGDescriptive NameParameters of Report Forming Service

DescriptionThis parameter class includes parameters concerning Report Forming Service.

3.11.1 Parameter 050:0001 MEA_REPORT_FORMATS

Descriptive nameMeasurement Report Formats

Value Meaning

T null NRI is supprted in BSC

F null NRI is not supported in BSC

Page 219: 10

DN9979835 219

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

ModifiableYES

DescriptionAllowed formats of Measurement Reports.

Default value(s)GX: 03H MX: 05H

Allowed values01H - 07H

Forbidden values

DependenceDependence on other parameters does not exist.

Feature30095 - REPORT FORMING SERVICE

1258 - XML FILE FORMAT FOR STATISTICS

1713 - Binary Reports Removal

3.12 Parameter class 053 MSC_SERVER_PARAMETERSDescriptive NameMSC Server specific parameters

DescriptionThe parameter class includes the parameters that are related to the MSC Server func-tionality of the standalone and integrated MSC Servers and Gateway Control Servers (GCS).

3.12.1 Parameter 053:0000 MSC_SERVER_SUPPORTED

Descriptive nameMSC Server functionality active

Value Meaning

01H Ascii format allowed.

02H Binary format allowed.

03H Ascii and Binary formats allowed.

04H XML format allowed.

05H Ascii and XML formats allowed.

06H Binary and XML formats allowed.

07H Ascii, Binary and XML formats allowed.

Page 220: 10

220 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableON/OFF

DescriptionThe parameter defines if the MSC Server functionality is in use in the network element.

Default value(s)MX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Feature1330 - BICC

1331 - SIP

1334 - MEGACO INTERFACE MEASUREMENT

1335 - TRFO AND TFO

1367 - CONTEXT MANAGER IN MSC Server

1370 - MSC CONTROL PLANE ROUTING

1371 - USER PLANE ROUTING

1373 - H.248 PROTOCOL IN MSC Server

1629 - User Plane Routing architecture improvements

3.12.2 Parameter 053:0009 DSCP_FOR_SIGNALLING

Descriptive nameDifferentiated Services codepoint for signalling traffic

ModifiableYES

Value Meaning

TRUE The MSC Server functionality is available in the network element.

FALSE The MSC Server functionality is not available in the network element.

ON The feature is active.

OFF The feature is inactive. This is the default value.

Page 221: 10

DN9979835 221

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionSignalling applications (BICC, SIP, H.248, M3UA, LDAP client in SCPU unit of NVS and IWF control protocol (NPI)) use this parameter to set the Differentiated Services code-point carried in the Type of Service or Traffic Class field in IPv4 and IPv6 headers, respectively. The parameter can be set to any value between 0H and 03FH. For defini-tions of the diffServ codepoints and respective values, see RFC2474, RFC2597, and RFC2598. Refer to QoS DSCP mapping instructions of site routers.

Default value(s)GX: 0H MX: 030H 3X: 030H

Allowed values0H - 03FH

Forbidden values

DependenceDependence on other parameters does not exist.

Feature1330 - BICC

1331 - SIP

1349 - H.248

1373 - H.248 PROTOCOL IN MSC Server

1429 - ANSI BICC

50035 - SS7 MTP3-USER ADAPTATION LAYER (M3UA)

1328 - Data calls in MSC Server

3.13 Parameter class 056 STLOG_FACILITIESDescriptive Nameparameters of stlog

DescriptionThe parameter class contains parameters related to collecting of service terminal com-mands.

3.13.1 Parameter 056:0000 LOG_ON

Descriptive nameService terminal commands collecting allowed

Value Meaning

0H Best Effort

030H Assured Forwarding (AF41)

Page 222: 10

222 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableYES

DescriptionThe parameter defines whether the service terminal commands will be saved or not.

Default value(s) GX: 1 (T)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature30314 - Service terminal log

3.14 Parameter class 058 OAM_SECURITYDescriptive NameO&M Security Parameters

DescriptionThis parameter class includes parameters concerning O&M security.

3.14.1 Parameter 058:0000 PW_POLICY_FEATURE

Descriptive namePassword Policy Feature

ModifiableON/OFF

DescriptionThe parameter defines whether feature Password Policy is in use or not.

Value Meaning

T The commands will be saved to the disk.

F The commands will not be saved.

Value Meaning

FALSE Optional feature is not in use.

TRUE Optional feature is in use.

Page 223: 10

DN9979835 223

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)GX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Feature31390 - Password Policy

3.14.2 Parameter 058:0001 UA_POLICY_FEATURE

Descriptive nameUser Account Policy Feature

ModifiableON/OFF

DescriptionThis parameter defines whether feature User Account Policy (31391) is in use or not.

Default value(s)GX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

ON Optional feature is in use and has been activated.

OFF Optional feature is in use and has not been activated (default).

Value Meaning

Value Meaning

FALSE Optional feature is not in use.

TRUE Optional feature is in use.

ON Optional feature is in use and has been activated.

OFF Optional feature is in use and has not been activated (default).

Page 224: 10

224 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

DependenceDependence on other parameters does not exist.

Feature31391 - User Account Policy

3.14.3 Parameter 058:0002 SSH_SERVER_FEATURE

Descriptive nameSecure Shell (SSH) Server feature

ModifiableON/OFF

DescriptionThe parameter defines whether the feature Secure Shell (SSH) Server is in use or not.

Default value(s)GX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Feature31458 - Secure Shell (SSH) Server

3.14.4 Parameter 058:0003 SFTP_SERVER_FEATURE

Descriptive nameSFTP Server feature

ModifiableON/OFF

DescriptionThe parameter defines whether the feature SFTP Server is in use or not.

Value Meaning

FALSE Optional feature is not in use.

TRUE Optional feature is in use.

ON Optional feature is in use and has been activated.

OFF Optional feature is in use and has not been activated.

Page 225: 10

DN9979835 225

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s)GX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Feature31458 - Secure Shell (SSH) Server

31459 - Secure FTP (SFTP) Server

3.14.5 Parameter 058:0004 USER_ACCOUNT_LOCK_LIMIT

Descriptive nameUser Account Lock Limit

ModifiableYES

DescriptionThis parameter defines how many unsuccessful login attempts are allowed for a user before the user account will be locked, i.e. the user name and password can be used for login no more. When the number of unsuccessful login attempts exceeds the value defined with this parameter, the user account will be locked. Note that users who are attached to an administrative profile will not be locked. This parameter is usable only if the User Account Policy feature is enabled in the network element.

Default value(s)GX: 0D

Allowed values

Value Meaning

FALSE Optional feature is not in use.

TRUE Optional feature is in use.

ON Optional feature is in use and has been activated.

OFF Optional feature is in use and has not been activated.

Value Meaning

0 User accounts do not get locked.

Page 226: 10

226 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Forbidden values

DependenceThe parameter is dependent on feature(s):

31391 - User Account Policy

Feature -

3.14.6 Parameter 058:0005 CONF_INTERFACES_FEATURE

Descriptive nameConfigurable O&M Interfaces Feature

ModifiableON/OFF

DescriptionThe parameter determines whether the feature Configurable O&M Interfaces is in use or not.

Default value(s)MX: FALSE

Allowed valuesTRUE / FALSE

Forbidden values

DependenceDependence on other parameters does not exist.

Feature31583 - Configurable O&M Interfaces

Value Meaning

TRUE Optional feature is in use.

FALSE Optional feature is not in use.

ON Optional feature is in use and has been activated.

OFF Optional feature is in use and has not been activated.

Page 227: 10

DN9979835 227

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.15 Parameter class 060 MANAGEMENT_PROTOCOLSDescriptive NameParameters of management protocols

DescriptionParameters that manage the use of management fragments of management protocols.

3.15.1 Parameter 060:0000 Q3_FM

Descriptive nameQ3 FM in use

ModifiableYES

DescriptionSpecifies whether Q3 Fault Management is in use or not.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.15.2 Parameter 060:0001 Q3_PM

Descriptive nameQ3 PM in use

ModifiableYES

DescriptionSpecifies whether Q3 Performance Management is in use or not.

Value Meaning

T In use

F Not in use

Page 228: 10

228 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.15.3 Parameter 060:0002 Q3_CM

Descriptive nameQ3 CM in use

ModifiableYES

DescriptionSpecifies whether Q3 Configuration Management is in use or not.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

Value Meaning

T In use

F Not in use

Value Meaning

T In use

F Not in use

Page 229: 10

DN9979835 229

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.15.4 Parameter 060:0003 Q3_SW

Descriptive nameQ3 SW in use

ModifiableYES

DescriptionSpecifies whether Q3 SW Management is in use or not.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.15.5 Parameter 060:0004 Q3_HW

Descriptive nameQ3 HW in use

ModifiableYES

DescriptionSpecifies whether Q3 HW Management is in use or not.

Default value(s) GX: 0 (F)

Value Meaning

T In use

F Not in use

Value Meaning

T In use

F Not in use

Page 230: 10

230 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.15.6 Parameter 060:0005 Q3_TRACE

Descriptive nameQ3 Trace in use

ModifiableYES

DescriptionSpecifies whether Q3 Trace is in use or not.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.15.7 Parameter 060:0006 Q3_UM

Descriptive nameQ3 UM in use

ModifiableYES

Value Meaning

T In use

F Not in use

Page 231: 10

DN9979835 231

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DescriptionSpecifies whether Q3 User Management is in use or not.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.15.8 Parameter 060:0007 NE3S_FM

Descriptive nameNE3S FM in use

ModifiableYES

DescriptionSpecifies whether NE3S Fault Management is in use or not.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Value Meaning

T In use

F Not in use

Value Meaning

T In use

F Not in use

Page 232: 10

232 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Feature -

3.15.9 Parameter 060:0008 NE3S_PM

Descriptive nameNE3S PM in use

ModifiableYES

DescriptionSpecifies whether NE3S Performance Management is in use or not.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.15.10 Parameter 060:0009 NE3S_CM

Descriptive nameNE3S CM in use

ModifiableYES

DescriptionSpecifies whether NE3S Configuration Management is in use or not.

Value Meaning

T In use

F Not in use

Value Meaning

T In use

F Not in use

Page 233: 10

DN9979835 233

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.15.11 Parameter 060:0010 NE3S_SW

Descriptive nameNE3S SW in use

ModifiableYES

DescriptionSpecifies whether NE3S SW Management is in use or not.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.15.12 Parameter 060:0011 NE3S_LM

Descriptive nameNE3S LM in use

Value Meaning

T In use

F Not in use

Page 234: 10

234 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

ModifiableYES

DescriptionSpecifies whether NE3S Licence Management is in use or not.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.15.13 Parameter 060:0012 NE3S_HW

Descriptive nameNE3S HW in use

ModifiableYES

DescriptionSpecifies whether NE3S HW Management is in use or not.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

Value Meaning

T In use

F Not in use

Value Meaning

T In use

F Not in use

Page 235: 10

DN9979835 235

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

DependenceDependence on other parameters does not exist.

Feature -

3.15.14 Parameter 060:0013 NE3S_UM

Descriptive nameNE3S UM in use

ModifiableYES

DescriptionSpecifies whether NE3S User Management is in use or not.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.15.15 Parameter 060:0014 NE3S_TRACE

Descriptive nameNE3S Trace in use

ModifiableYES

DescriptionSpecifies whether NE3S Trace is in use or not.

Value Meaning

T In use

F Not in use

Page 236: 10

236 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d805808a9388Confidential

PRFILE and FIFILE parameters

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

3.15.16 Parameter 060:0015 NE3S_ATL

Descriptive nameNE3S Audit Trail in use

ModifiableYES

DescriptionSpecifies whether NE3S Audit Trail is in use or not.

Default value(s) GX: 0 (F)

Allowed values1 (T) / 0 (F)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature -

Value Meaning

T In use

F Not in use

Value Meaning

T In use

F Not in use

Page 237: 10

DN9979835 237

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameters

Id:0900d805808a9388Confidential

3.15.17 Parameter 060:0016 NE3S

Descriptive nameNE3S Interface

ModifiableYES

DescriptionThe parameter determines whether NE3S interface is in use or not.

Default value(s)GX: 0FFH (TRUE)

Allowed values0FFH (TRUE) / 00H (FALSE)

Forbidden values

DependenceDependence on other parameters does not exist.

Feature31493 - NE3S Framework

Value Meaning

TRUE NE3S Interface is in use.

FALSE NE3S Interface is not in use.

Table 5

Page 238: 10

238 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d09fConfidential

PRFILE and FIFILE parameter index by parameter class

4 PRFILE and FIFILE parameter index by parameter class

Class Number F/M Name Function

002 0035 F PRIMARY_RATE_INTERFACE

Exchange has possibility to primary rate inter-face connections

002 0093 No DOUBLE_BA_LIST Double BCCH allocation list

002 0094 No TRANSM_EQ_MML_ENABLE

BSS Transmis-sion Equipment Handling MML enabling parame-ter

002 0173 No REMOTE_MMI Remote MMI flag

002 0188 F T1_ENVIRONMENT T1 environment

002 0241 M Q3_DX_ALARMS_FORW_ON

Q3 DX alarm for-warding enabled

002 0283 No HR_FEATURE_IN_BSC Half Rate feature installed in BSC

002 0361 M NORTH_AMERICAN_NUMBER

North American (World Zone 1) numbering

002 0371 No AEC_USAGE Usage of Acoustic Echo Canceller

002 0372 No TFO_USAGE Use of Tandem-Free Operation

002 0380 No ALLOW_OVER_16TRX Creating more than 16 TRXs in a BCSU

002 0399 No THREE_DIGIT_MNC Three digit MNC

002 0417 No FH_IUO_USAGE Frequency hopping for intelli-gent underlay overlay usage.

002 0418 M SMSCB_LAST_BLOCK_INFO

SMS CB last block information used in BSC

002 0444 No BTS_HW_DB_Q3_INT_IN_USE

BTS HW Database Q3 Interface applica-tion is in use

002 0461 M BIN_HEADER_TYPE Binary report header type

Table 6 Index by parameter class.

Page 239: 10

DN9979835 239

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterclass

Id:0900d8058075d09fConfidential

002 0466 No FLEX_MAIO_USAGE Flexible maio management usage.

002 0470 M SMSCB_INDEPEN_MULTIPAGE

SMS CB pages considered inde-pendent by the BSC

002 0500 No ALLOW_48_OR_64_TRX Larger Capacity BSC: Creation of 48 TRXs (BSCE) and 64 TRXs (BSC2E/A ) in a BCSU

002 0511 F ABIS_AUTOCONF_IN_USE

BSC Support for Autoconfigura-tion: Abis auto-configuration in use

002 0558 No MS_CAP_IND_USAGE Authorisation of the use of the MS Capability Indica-tion measurement

002 0602 M TRE_SW_DL_MC_ADDRESS

Transmission equipment software download multi-cast address

002 0623 No NOISE_SUPPRESSION_USAGE

Noise Suppres-sion, use of

002 0626 No DAC_USAGE Defined Adjacent Cell measure-ment, use of

002 0628 No FER_USAGE FER measure-ment

002 0643 No REV_HUNT_USED Reversed hunting

002 0644 No DYN_ABIS_IN_USE Dynamic Abis allocation in use

002 0654 No PBS_USAGE Position Based Services

002 0664 No COMMON_BCCH_EGSM900

COMMON BCCH EGSM900

002 0665 No SEGMENT_USAGE SEGMENT USAGE

002 0666 No COMMON_BCCH_GSM900

COMMON BCCH GSM900

002 0667 No COMMON_BCCH_GSM1800

COMMON BCCH GSM1800

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 240: 10

240 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d09fConfidential

PRFILE and FIFILE parameter index by parameter class

002 0668 No MULTI_BCF MULTI BCF

002 0693 M FIRST_FREE_NUMBERED_CGR

First allowed circuit group number for free numbered circuit groups.

002 0701 No S9_LOCATION_SYSTEM Cell ID, TA and RxLevel delivery to Standalone SMLC

002 0702 No TTY_USAGE Text Telephone (TTY)

002 0711 M NEMU_IS_PRESENT NEMU is present in the network element

002 0733 No COMMON_BCCH_GSM800

COMMON BCCH GSM800

002 0734 No COMMON_BCCH_GSM1900

COMMON BCCH GSM1900

002 0737 No GSM800_1900_USAGE Dual Band for GSM800/GSM1900 usage

002 0738 No GSM800_1800_USAGE Dual Band for GSM800/GSM1800 usage

002 0739 No ISHO_SUPPORT_IN_BSC Inter-System HO support in BSC

002 0749 No LB_USAGE Position Based Services

002 0750 No LB_PLUS Position Based Services

002 0764 No CITARX_USAGE CITARX usage

002 0776 No EMR_SUPPORT_IN_BSC Support for Enhanced Mea-surement Report

002 0790 M HW_INVENTORY_IN_USE HW Inventory ON/OFF

002 0809 No ANTENNA_HOPPING_USAGE

Antenna hopping for UltraSite

002 0814 M Q3_IN_USE Q3 Interface in Use

002 0820 No TOTAL_FEP_USAGE Total FEP usage

002 0829 No LB_STACK_IN_BCSU Position Based Services

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 241: 10

DN9979835 241

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterclass

Id:0900d8058075d09fConfidential

002 0839 No BTS_METRO_SITE_BATBU_PR

Intelligent Shutdown for Met-roSite BTS

002 0843 No BTS_ULTRA_SITE_BATBU_PR

Intelligent Shutdown for UltraSite BTS

002 0857 No CHILD_CELL_BAR Child Cell Barred Check

002 0899 No EXT_UTBF_USAGE Extended uplink TBF mode feature usage

002 0905 No UTDOA_SUPPORT Support for the UTDOA system

002 0921 M HW_CHANGE_NOTIF_IN_USE

Equipment database change notifications ON/OFF

002 0947 No BSR_SUPPORT_IN_BSC BSR Usage

002 1006 No UTDOA_COMMERCIAL Support for the commercial location request in UTDOA system

002 1114 No EQOS_TESTING_MODE Allowing config-ure PCU2 with EQoS enabled in a same track with PCUs.

002 1120 M LAN_ADMINISTRATION Integrated LAN Administration feature activation

002 1167 M COMBI_CONF_ALLOWED Combi BSC3i/TCSM3i configuration allowed

002 1264 No EMR_RESTRICTED EMR activation restricted in BSC

002 1475 No RNW_OM_LOG_USAGE Automated RNW O&M log collec-tion feature control usage

002 1500 M BSC_PCMMAP_PATH_CTRL

PCM transfer selection path for BSC3i upgrade

002 1554 M SEL_OCTFIL_VARIANT_TO

Select OCTFIL variant to use

009 0008 M LOAD_RATE_SAMPLE_INTERV

Processor load rate measure-ment interval

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 242: 10

242 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d09fConfidential

PRFILE and FIFILE parameter index by parameter class

009 0010 F CRC4_TRH_FOR_DEGRAD_MIN

Threshold value for degraded minutes

009 0011 F CRC4_TRH_FOR_ERRORE_SEC

Threshold value for errored seconds

009 0028 M SEC_EVENT_ALARM_LIMIT

Security event alarm limit

009 0029 M SEC_EVENT_MON_PERIOD

Monitoring period for number of security events

009 0037 M BTS_SITE_BATBU_PROC BTS site battery backup procedure

009 0044 M EXCL_EST_CAUSES_HO_REF

Exclusion of establishment cause values from handover refer-ence.

009 0049 M BITMAP_CHECK_RECORDS

Maximum count of records checked in one bitmap supervision interval

009 0050 M BITMAP_CHECK_BYTES Maximum count of bytes checked in one bitmap super-vision interval

009 0051 M BITMAP_SUPERV_INTERVAL

Bitmap supervi-sion interval

009 0052 M CHKSUM_SUPERV_INTERVAL

Checksum super-vision interval

009 0055 M TR_EQU_COLL_START_TIM

Starting Time of Existence Data Collection of BTS-Controlled Trans-mission Equip-ment

009 0072 M CBC_INDIC_FILT_TIMER Time limit for indi-cating cell broad-cast interruptions to CBC

009 0075 M NUMBER_OF_Q1_CHANNELS

Number of Q1 channels to be reserved

009 0079 M TRE_CHKSUM_COLL_COUNT

Transmission equipment checksum collec-tion count

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 243: 10

DN9979835 243

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterclass

Id:0900d8058075d09fConfidential

009 0090 M BTS_Q1_RT_UPDATE_COUNT

Number of BTS realtime updates in a day

009 0098 M SDCCH_SIGN_SUP_BTS_MSC

Guard timer for long SDCCH res-ervations

009 0137 M SEC_EVENT_LOAD_LIMIT Security reporting event load limit

009 0138 M SEC_EVENT_UNSUC_LIMIT

Unsuccessful security reporting event alarm limit

010 0004 F PCM_MAINT_ANNOUNCE_TL

Start time of the prompt mainte-nance alarm indi-cation

010 0005 M DR_USAGE Directed Retry

010 0006 M IDR_USAGE Intelligent Directed Retry

010 0007 M TR_USAGE_IN_MTC Trunk Reserva-tion in mobile ter-minated call

010 0008 M TR_USAGE Trunk Reserva-tion

010 0011 M CM_BASED_SUBS_TYPE Classmark-based subscriber type

010 0012 M PRIOR_BASED_SERV_SEP

Priority-based service separa-tion

010 0014 M C2_CELL_RESEL C2 microcell re-selection parame-ter in use

010 0015 M FACCH_CALL_SET_UP FACCH call set-up in use

010 0016 M PREEMPT_USAGE Preemption usage.

010 0019 M CI_BASED_HO_EVAL_P C/I based HO candidate evalua-tion

010 0020 M EXT_CELL_USAGE_P The usage of extended cell radius

010 0021 M MS_PWR_OPT_IN_HO_P MS power optimi-zation in handover

010 0022 M SDCCH_HO_USAGE_P SDCCH Handover

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 244: 10

244 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d09fConfidential

PRFILE and FIFILE parameter index by parameter class

010 0023 M UNDERLAY_OVERLAY_US_P

Intelligent underlay-overlay

010 0024 M CHAINED_CELL_USAGE_P

The usage of chained cells in rapid field drop

010 0025 M FMMS_USAGE_P Fast Moving MS Handling Usage

010 0026 M DUAL_BAND_USAGE_P Dual Band GSM/DCS Network Opera-tion usage

010 0027 M RNOS_USAGE_P Radio Network Optimization Sta-tistics Usage

010 0028 M RXQ_HAC_USAGE_P RX Quality Statis-tics and Handover Adjacent Cell Measurement

010 0030 M DISTANCE_VERIFYING Distance Verifying

010 0031 M SATELL_ABIS_IN_USE Satellite Abis

010 0032 M Q3_BTS_HW_REM_INQ_USE

Remote interroga-tion of the BTS serial and version numbers feature

010 0033 M EFR_SUPPORT_IN_BSC EFR speech coder support in BSC

010 0034 M SMS_CB_DRX_USD_IN_BSC

SMS CB DRX in BSC Usage

010 0035 M HOT_SPOT_USAGE_P Hot Spot Location usage

010 0036 M CI_STATISTICS_USAGE_P

C/I Ratio Statistics

010 0042 M DYNAMIC_SDCCH Dynamic SDCCH in BSC

010 0044 M SMS_CBC_USD_IN_BSC Use of CBC inter-face in BSC

010 0045 M ICE_USAGE_P Handover Support for Coverage Enhancements

010 0046 M ERFD_USAGE_P Enhanced Rapid Field Drop

010 0047 M HSCSD_USAGE HSCSD in BSC

010 0048 M DATA_144_USAGE 14.4 kbit/s in BSC

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 245: 10

DN9979835 245

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterclass

Id:0900d8058075d09fConfidential

010 0050 M DADLB_USAGE_P Direct Access to Desired Layer/Band Usage

010 0051 M DC_OBSERVATION_USAGE

Use of Trace Window for Dropped Calls feature

010 0052 M FCS_SET_USAGE Usage of the feature Flexible counter selection set

010 0053 M AMH_USAGE_P Advanced Multi-layer Handling Usage

010 0065 M CHAN_FIN_USAGE_P Channel Finder measurement, use of

010 0068 M RCS_FER_FILTER Data filtering from FER measure-ment

010 0071 M DTM_CALL_PENALTY_TIMER

DTM call assign-ment penalty timer

012 0039 M NAMETBL_MAX_SERV Maximum amount of services in nametable

016 0000 M ALARM_PRINT_END_MARK

Alarm print end mark

016 0001 M LAMP_PANEL_POLARITY Lamp panel polarity

016 0002 M ALARM_DRIVEN_OUTPUTS

Number of alarm outputs directed by alarms

016 0003 M LAMP_PANEL_BUZZER Activation of lamp panel buzzer by alarms

016 0007 M BTS_ALARM_FILTERING_USE

Base Station alarm filtering in BSC, use of

037 0000 F ATTN_FOR_2_GEN_BTS Attenuation value for 2nd generation BTS

037 0001 F ATTN_FOR_3_GEN_BTS Attenuation value for Talk-family BTS

037 0002 F ATTN_FOR_4_GEN_BTS Attenuation value for PrimeSite BTS

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 246: 10

246 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d09fConfidential

PRFILE and FIFILE parameter index by parameter class

037 0003 F ATTENUATED_CH_NBR_1 1. attenuated channel number

037 0004 F ATTENUATED_CH_NBR_2 2. attenuated channel number

037 0005 F ATTENUATED_CH_NBR_3 3. attenuated channel number

037 0006 F ATTENUATED_CH_NBR_4 4. attenuated channel number

037 0007 F ATTENUATED_CH_NBR_5 5. attenuated channel number

037 0008 F ATTENUATED_CH_NBR_6 6. attenuated channel number

037 0009 F ATTENUATED_CH_NBR_7 7. attenuated channel number

037 0010 F ATTENUATED_CH_NBR_8 8. attenuated channel number

037 0011 F ATTENUATED_CH_NBR_9 9. attenuated channel number

037 0012 F ATTENUATED_CH_NBR_10

10. attenuated channel number

037 0013 F ATTENUATED_CH_NBR_11

11. attenuated channel number

037 0014 F ATTENUATED_CH_NBR_12

12. attenuated channel number

037 0015 F ATTENUATED_CH_NBR_13

13. attenuated channel number (spare)

037 0016 F ATTENUATED_CH_NBR_14

14. attenuated channel number (spare)

037 0017 F ATTENUATED_CH_NBR_15

15. attenuated channel number (spare)

037 0018 F ATTENUATED_CH_NBR_16

16. attenuated channel number (spare)

037 0019 F ATTENUATED_CH_NBR_17

17. attenuated channel number (spare)

037 0022 F ATTN_FOR_METROSITE_BTS

Attenuation value for MetroSite BTS

037 0024 F ATTN_FOR_ULTRASITE_BTS

Attenuation value for UltraSite BTS

037 0025 F ATTN_FOR_INSITE_BTS Attenuation value for InSite BTS

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 247: 10

DN9979835 247

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterclass

Id:0900d8058075d09fConfidential

037 0026 F ATT_850_CH_NBR_1 Attenuated channel number 128

037 0027 F ATT_850_CH_NBR_2 Attenuated channel number 181

037 0028 F ATT_850_CH_NBR_3 Attenueted channel number 183

037 0029 F ATT_850_CH_NBR_4 Attenuated channel number 231

037 0030 F ATT_850_CH_NBR_5 Attenuated channel number 233

037 0031 F ATT_850_CH_NBR_6 Spare attenuated channel number

037 0032 F ATT_850_CH_NBR_7 Spare attenuated channel number

037 0033 F ATT_850_CH_NBR_8 Attenuated channel number 251

037 0034 F ATT_850_CH_NBR_9 Attenuated spare channel number

037 0035 F ATT_850_CH_NBR_10 Attenuated second spare channel number

037 0036 F INC_SIGNAL_WAITING_TIME

Incoming signal waiting time

037 0037 F ATTN_FOR_800_CH_6_ULTRA

Attenuation value for UltraSite BTS

037 0038 F ATTN_FOR_800_CH_7_ULTRA

Attenuation value for UltraSite BTS

037 0039 M IUO_RECOVERY_NOT_DONE

IUO_RECOVERY_NOT_DONE

037 0040 M MAX_BSC_TRE_SW_DL_COUNT

BSC site maximum concur-rent software downloading count

037 0041 M MAX_BTS_TRE_SW_DL_COUNT

BTS site maximum concur-rent software downloading count

037 0042 M SYNC_RECOV_ENABLED SYNC_RECOV_ENABLED

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 248: 10

248 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d09fConfidential

PRFILE and FIFILE parameter index by parameter class

037 0043 M LMUSYN_LOSS_ALARM_LIMIT

LOSS OF LMU SYNCHRONISA-TION ALARM LIMIT

037 0044 M LMUSYN_LOSS_RESET_LIMIT

TIME LIMIT FOR ULTRASITE BCF RESTART DUE TO LOSS OF LMU SYNC

037 0046 M LMUSYN_LOSS_C_RESET_LIM

TIME LIMIT FOR METROSITE BCF RESTART DUE TO LOSS OF LMU SYNC

038 0000 M WRITE_CACHE_TIMEOUT MML Command Log: write cache timeout

038 0001 M STORAGE_LENGTH MML Command Log: storage length of log contents

038 0002 M MAX_FILE_COUNT MML Command Log and Service Terminal Log: Maximum file count

038 0003 M ADMINISTRATION_HOUR MML Command Log: Hour part of administration time

038 0004 M ADMINISTRATION_MINUTES

MML Command Log and Service Terminal Log: Minutes part of administration time

044 0000 M PW_CHAR_TO_PRINT Character to be printed on terminal when entering pass-word.

044 0001 M FIRST_MMI_LOGIN_DELAY

First login delay in MMI User Identifi-cation.

044 0002 M MAX_MMI_LOGIN_DELAY Maximum login delay in MMI User Identification.

044 0003 M OVERFLOW_LOGIN_DELAY

Overflow login delay in MMI User Identification

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 249: 10

DN9979835 249

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterclass

Id:0900d8058075d09fConfidential

044 0005 M DISCLAIMER_TEXT Activation param-eter for feature MMI Disclaimer Display

044 0006 M DEF_MAIN_HEADING_TEXT

The default NE name text used in main heading printout

046 0046 M MEMORY_OUT_FLAG_SUM

Memory out flag sum

046 0047 M EGPRS_UPLINK_PENALTY

EGPRS uplink penalty

046 0048 M EGPRS_UPLINK_THRESHOLD

EGPRS uplink threshold

046 0049 M EGPRS_DOWNLINK_PENALTY

EGPRS downlink penalty

046 0050 M EGPRS_DWNLINK_THRESHOLD

EGPRS downlink threshold

046 0051 M GPRS_UPLINK_PENALTY GPRS uplink penalty

046 0052 M GPRS_UPLINK_THRESHOLD

GPRS uplink threshold

046 0053 M GPRS_DOWNLINK_PENALTY

GPRS downlink parameters

046 0054 M GPRS_DOWNLINK_THRESHOLD

GPRS downlink threshold

046 0055 M UPLNK_RX_LEV_FRG_FACTOR

Uplink Rx-level forgetting factor

046 0059 M TERRIT_BALANCE_THRSHLD

Territory balance threshold

046 0060 M TERRIT_UPD_GTIME_GPRS

GPRS territory update guard time

046 0061 M TBF_LOAD_GUARD_THRSHLD

TBF load guard threshold

046 0062 M TBF_SIGNAL_GRD_THRSHLD

TBF signal guard threshold

046 0064 M PRE_EMPTIVE_TRANSMISSIO

Pre-emptive transmission

046 0066 F BCCH_BAND_TBF_THRSHLD

BCCH band TBF threshold

046 0067 M DL_TBF_RELEASE_DELAY

Downlink tempo-rary block flow release delay

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 250: 10

250 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d09fConfidential

PRFILE and FIFILE parameter index by parameter class

046 0068 M UL_TBF_RELEASE_DELAY

Uplink temporary block flow release delay

046 0071 M UL_TBF_REL_DELAY_EXT

Uplink TBF release delay in extended mode

046 0072 M UL_TBF_SCHED_RATE_EXT

Uplink TBF scheduling rate in extended mode release delay

046 0085 M POLLING_INTERVAL_STRM

POLLING INTERVAL STRM

046 0086 M POLLING_INTERVAL_IA POLLING INTERVAL IA

046 0087 M POLLING_INTERVAL_BG POLLING INTERVAL BG

046 0090 M PFC_PFT_LEGACY_STRM PFC PFT LEGACY STRM

046 0091 M EGPRS_GPRS_MUX_PENALTY

EGPRS GPRS MUX PENALTY

046 0092 M GPRS_UL_MUX_DEC_FACTOR

GPRS UL MUX DEC FACTOR

046 0093 M EGPRS_DL_MUX_DEC_FACTOR

EGPRS DL MUX DEC FACTOR

046 0096 M NCCR_NON_DRX_PERIOD

NCCR Non DRX Period

046 0097 M NCCR_MEAS_REPORT_TYPE

NCCR measure-ment report type

046 0099 M SUSPEND_PCU_LOAD_NOTIF

PCU Load Notifi-cation lifetime

046 0100 M CHA_CONC_UL_TBF_FAV_DIR

CHA_CONC_UL_TBF_FAVOR_DIR

046 0101 M CHA_CONC_DL_TBF_FAV_DIR

CHA_CONC_DL_TBF_FAVOR_DIR

046 0102 M PFC_PFT_MAX_NRT PFC_PFT_MAX_NRT

046 0103 M PFC_PFT_MAX_RT PFC_PFT_MAX_RT

046 0105 M DTM_CALL_ASSIGN_TIMER

DTM call assign-ment timer

046 0106 M MAX_LAPD_LENGHT Maximum LAPD message length

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 251: 10

DN9979835 251

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterclass

Id:0900d8058075d09fConfidential

046 0107 M DTM_MS_CL_11_SUPP_EDA

DTM Multislot Class 11 mobile extended dynamic alloca-tion mode support

046 0109 M IBNACC_POLLING_TIME IBNACC polling time

046 0110 M LBNCCR_MIN_INTERVAL_PLR

LBNCCR Minimum Interval Between PS Load Reports

046 0111 M QOS_UPGRADE_TIME QoS upgrade time

046 0113 M POLLING_INTERVAL_BG_LOW

POLLING INTERVAL BG LOW

046 0114 M POLLING_INTERVAL_IA_LOW

POLLING INTERVAL IA LOW

046 0115 M POLLING_INTERVAL_ST_LOW

POLLING INTERVAL ST LOW

046 0116 M DL_DTM_TBF_REL_DELAY

Downlink tempo-rary block flow release delay for DTM call

046 0117 M UL_DTM_TBF_RELDELAY_EXT

Uplink TBF release delay for DTM call in extended mode

046 0118 M UL_DTM_TBF_REL_DELAY

Uplink temporary block flow release delay for DTM call

046 0119 M RESEGMENT_MODE Resegment mode selector

046 0126 M BTS_DLDC_TSL_BALANC_THR

BTS DLDC TSL BALANCE THRESHOLD

049 0000 M TNS_BLOCK NS level block timer

049 0001 M TNS_RESET Timer for NS level reset

049 0002 M TNS_TEST Timer for NS level test

049 0003 M TNS_ALIVE Timer for NS level alive procedure

049 0005 M NS_BLOCK_RETRIES NS block retries

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 252: 10

252 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d09fConfidential

PRFILE and FIFILE parameter index by parameter class

049 0006 M NS_UNBLOCK_RETRIES NS unblock retries

049 0007 M NS_ALIVE_RETRIES NS alive retries

049 0008 M NS_RESET_RETRIES NS reset retries

049 0009 M TGB_BLOCK Timer of GB block

049 0010 M TGB_RESET Timer for Gb reset

049 0011 M TGB_SUSPEND Timer for Gb suspend

049 0013 M BVC_BLOCK_RETRIES BVC block retries

049 0014 M BVC_UNBLOCK_RETRIES BVC unblock retries

049 0015 M BVC_RESET_RETRIES BVC reset retries

049 0016 M SUSPEND_RETRIES Suspend retries

049 0020 M FC_R_DIF_TRG_LIMIT R_dif limit value

049 0021 M FC_MS_R_DEF MS-specific leak rate default value

049 0022 M FC_MS_R_DEF_EGPRS MS-specific leak rate default value for EGPRS

049 0023 M FC_MS_R_MIN Minimum value of MS leak rate

049 0024 M FC_MS_B_MAX_DEF Buffering capacity default value

049 0025 M FC_MS_B_MAX_DEF_EGPRS

Buffering capacity default value

049 0026 M FC_R_TSL GPRS timeslot transmission capacity

049 0027 M FC_R_TSL_EGPRS EGPRS timeslot transmission capacity

049 0028 M FC_B_MAX_TSL GPRS timeslot buffering capacity

049 0029 M FC_B_MAX_TSL_EGPRS EGPRS timeslot buffering capacity

049 0031 M TSNS_PROV Timer for sub-network service procedures

049 0032 M SNS_ADD_RETRIES Sub-network service add retries

049 0033 M SNS_CONFIG_RETRIES Sub-network service config retries

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 253: 10

DN9979835 253

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterclass

Id:0900d8058075d09fConfidential

049 0034 M SNS_CHANGEWEIGHTS_RETRI

Sub-network service change-weights retries

049 0035 M SNS_DELETE_RETRIES Sub-network service delete retries

049 0036 M SNS_SIZE_RETRIES Sub-network service size retries

049 0037 M TGB_RAC_UPDATE TGB RAC UPDATE

049 0038 M RAC_UPDATE_RETRIES RAC UPDATE RETRIES

049 0052 M CONVERSATIONAL_ARP1 Priority class con-versational and traffic class 1

049 0053 M CONVERSATIONAL_ARP2 Priority class con-versational and traffic class 2

049 0054 M CONVERSATIONAL_ARP3 Priority class con-versational and traffic class 3

049 0055 M STREAMING_ARP1 Priority class streaming and traffic class 1

049 0056 M STREAMING_ARP2 Priority class streaming and traffic class 2

049 0057 M STREAMING_ARP3 Priority class streaming and traffic class 3

049 0058 M INTERACT_PRIOR_1_ARP1

Priority class interactive 1 and traffic class 1

049 0059 M INTERACT_PRIOR_1_ARP2

Priority class interactive 1 and traffic class 2

049 0060 M INTERACT_PRIOR_1_ARP3

Priority class interactive 1 and traffic class 3

049 0061 M INTERACT_PRIOR_2_ARP1

Priority class interactive 2 and traffic class 1

049 0062 M INTERACT_PRIOR_2_ARP2

Priority class interactive 2 and traffic class 2

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 254: 10

254 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d09fConfidential

PRFILE and FIFILE parameter index by parameter class

049 0063 M INTERACT_PRIOR_2_ARP3

Priority class interactive 2 and traffic class 3

049 0064 M INTERACT_PRIOR_3_ARP1

Priority class interactive 3 and traffic class 1

049 0065 M INTERACT_PRIOR_3_ARP2

Priority class interactive 3 and traffic class 2

049 0066 M INTERACT_PRIOR_3_ARP3

Priority class interactive 3 and traffic class 3

049 0067 M BACKGROUND_ARP1 Priority class background and traffic class 1

049 0068 M BACKGROUND_ARP2 Priority class background and traffic class 2

049 0069 M BACKGROUND_ARP3 Priority class background and traffic class 3

049 0072 M RESUME_RETRIES Resume retries

049 0073 M TGB_RESUME Timer for Gb resume

049 0082 M PS_NULL_NRI_SUPPORT PS_NULL_NRI support

050 0001 M MEA_REPORT_FORMATS Measurement Report Formats

053 0000 No MSC_SERVER_SUPPORTED

MSC Server func-tionality active

053 0009 M DSCP_FOR_SIGNALLING Differentiated Services code-point for signalling traffic

056 0000 M LOG_ON Service terminal commands col-lecting allowed

058 0000 No PW_POLICY_FEATURE Password Policy Feature

058 0001 No UA_POLICY_FEATURE User Account Policy Feature

058 0002 No SSH_SERVER_FEATURE Secure Shell (SSH) Server feature

058 0003 No SFTP_SERVER_FEATURE SFTP Server feature

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 255: 10

DN9979835 255

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterclass

Id:0900d8058075d09fConfidential

058 0004 M USER_ACCOUNT_LOCK_LIMIT

User Account Lock Limit

058 0005 No CONF_INTERFACES_FEATURE

Configurable O&M Interfaces Feature

060 0000 M Q3_FM Q3 FM in use

060 0001 M Q3_PM Q3 PM in use

060 0002 M Q3_CM Q3 CM in use

060 0003 M Q3_SW Q3 SW in use

060 0004 M Q3_HW Q3 HW in use

060 0005 M Q3_TRACE Q3 Trace in use

060 0006 M Q3_UM Q3 UM in use

060 0007 M NE3S_FM NE3S FM in use

060 0008 M NE3S_PM NE3S PM in use

060 0009 M NE3S_CM NE3S CM in use

060 0010 M NE3S_SW NE3S SW in use

060 0011 M NE3S_LM NE3S LM in use

060 0012 M NE3S_HW NE3S HW in use

060 0013 M NE3S_UM NE3S UM in use

060 0014 M NE3S_TRACE NE3S Trace in use

060 0015 M NE3S_ATL NE3S Audit Trail in use

060 0016 M NE3S NE3S Interface

Class Number F/M Name Function

Table 6 Index by parameter class. (Cont.)

Page 256: 10

256 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a2Confidential

PRFILE and FIFILE parameter index by parameter name

5 PRFILE and FIFILE parameter index by parameter name

Name Number Class F/M Function

ABIS_AUTOCONF_IN_USE

0511 002 F BSC Support for Autoconfiguration: Abis autoconfigura-tion in use

ADMINISTRATION_HOUR

0003 038 M MML Command Log: Hour part of adminis-tration time

ADMINISTRATION_MINUTES

0004 038 M MML Command Log and Service Terminal Log: Minutes part of administration time

AEC_USAGE 0371 002 No Usage of Acoustic Echo Canceller

ALARM_DRIVEN_OUTPUTS

0002 016 M Number of alarm outputs directed by alarms

ALARM_PRINT_END_MARK

0000 016 M Alarm print end mark

ALLOW_48_OR_64_TRX

0500 002 No Larger Capacity BSC: Creation of 48 TRXs (BSCE) and 64 TRXs (BSC2E/A ) in a BCSU

ALLOW_OVER_16TRX 0380 002 No Creating more than 16 TRXs in a BCSU

AMH_USAGE_P 0053 010 M Advanced Multilayer Handling Usage

ANTENNA_HOPPING_USAGE

0809 002 No Antenna hopping for UltraSite

ATTENUATED_CH_NBR_1

0003 037 F 1. attenuated channel number

ATTENUATED_CH_NBR_10

0012 037 F 10. attenuated channel number

ATTENUATED_CH_NBR_11

0013 037 F 11. attenuated channel number

ATTENUATED_CH_NBR_12

0014 037 F 12. attenuated channel number

ATTENUATED_CH_NBR_13

0015 037 F 13. attenuated channel number (spare)

Table 7 Index by parameter name.

Page 257: 10

DN9979835 257

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parametername

Id:0900d8058075d0a2Confidential

ATTENUATED_CH_NBR_14

0016 037 F 14. attenuated channel number (spare)

ATTENUATED_CH_NBR_15

0017 037 F 15. attenuated channel number (spare)

ATTENUATED_CH_NBR_16

0018 037 F 16. attenuated channel number (spare)

ATTENUATED_CH_NBR_17

0019 037 F 17. attenuated channel number (spare)

ATTENUATED_CH_NBR_2

0004 037 F 2. attenuated channel number

ATTENUATED_CH_NBR_3

0005 037 F 3. attenuated channel number

ATTENUATED_CH_NBR_4

0006 037 F 4. attenuated channel number

ATTENUATED_CH_NBR_5

0007 037 F 5. attenuated channel number

ATTENUATED_CH_NBR_6

0008 037 F 6. attenuated channel number

ATTENUATED_CH_NBR_7

0009 037 F 7. attenuated channel number

ATTENUATED_CH_NBR_8

0010 037 F 8. attenuated channel number

ATTENUATED_CH_NBR_9

0011 037 F 9. attenuated channel number

ATTN_FOR_2_GEN_BTS

0000 037 F Attenuation value for 2nd generation BTS

ATTN_FOR_3_GEN_BTS

0001 037 F Attenuation value for Talk-family BTS

ATTN_FOR_4_GEN_BTS

0002 037 F Attenuation value for PrimeSite BTS

ATTN_FOR_800_CH_6_ULTRA

0037 037 F Attenuation value for UltraSite BTS

ATTN_FOR_800_CH_7_ULTRA

0038 037 F Attenuation value for UltraSite BTS

ATTN_FOR_INSITE_BTS

0025 037 F Attenuation value for InSite BTS

ATTN_FOR_METROSITE_BTS

0022 037 F Attenuation value for MetroSite BTS

ATTN_FOR_ULTRASITE_BTS

0024 037 F Attenuation value for UltraSite BTS

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 258: 10

258 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a2Confidential

PRFILE and FIFILE parameter index by parameter name

ATT_850_CH_NBR_1 0026 037 F Attenuated channel number 128

ATT_850_CH_NBR_10 0035 037 F Attenuated second spare channel number

ATT_850_CH_NBR_2 0027 037 F Attenuated channel number 181

ATT_850_CH_NBR_3 0028 037 F Attenueted channel number 183

ATT_850_CH_NBR_4 0029 037 F Attenuated channel number 231

ATT_850_CH_NBR_5 0030 037 F Attenuated channel number 233

ATT_850_CH_NBR_6 0031 037 F Spare attenuated channel number

ATT_850_CH_NBR_7 0032 037 F Spare attenuated channel number

ATT_850_CH_NBR_8 0033 037 F Attenuated channel number 251

ATT_850_CH_NBR_9 0034 037 F Attenuated spare channel number

BACKGROUND_ARP1 0067 049 M Priority class back-ground and traffic class 1

BACKGROUND_ARP2 0068 049 M Priority class back-ground and traffic class 2

BACKGROUND_ARP3 0069 049 M Priority class back-ground and traffic class 3

BCCH_BAND_TBF_THRSHLD

0066 046 F BCCH band TBF threshold

BIN_HEADER_TYPE 0461 002 M Binary report header type

BITMAP_CHECK_BYTES

0050 009 M Maximum count of bytes checked in one bitmap supervision interval

BITMAP_CHECK_RECORDS

0049 009 M Maximum count of records checked in one bitmap supervi-sion interval

BITMAP_SUPERV_INTERVAL

0051 009 M Bitmap supervision interval

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 259: 10

DN9979835 259

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parametername

Id:0900d8058075d0a2Confidential

BSC_PCMMAP_PATH_CTRL

1500 002 M PCM transfer selec-tion path for BSC3i upgrade

BSR_SUPPORT_IN_BSC

0947 002 No BSR Usage

BTS_ALARM_FILTERING_USE

0007 016 M Base Station alarm fil-tering in BSC, use of

BTS_DLDC_TSL_BALANC_THR

0126 046 M BTS DLDC TSL BALANCE THRESH-OLD

BTS_HW_DB_Q3_INT_IN_USE

0444 002 No BTS HW Database Q3 Interface applica-tion is in use

BTS_METRO_SITE_BATBU_PR

0839 002 No Intelligent Shutdown for MetroSite BTS

BTS_Q1_RT_UPDATE_COUNT

0090 009 M Number of BTS realtime updates in a day

BTS_SITE_BATBU_PROC

0037 009 M BTS site battery backup procedure

BTS_ULTRA_SITE_BATBU_PR

0843 002 No Intelligent Shutdown for UltraSite BTS

BVC_BLOCK_RETRIES

0013 049 M BVC block retries

BVC_RESET_RETRIES

0015 049 M BVC reset retries

BVC_UNBLOCK_RETRIES

0014 049 M BVC unblock retries

C2_CELL_RESEL 0014 010 M C2 microcell re-selec-tion parameter in use

CBC_INDIC_FILT_TIMER

0072 009 M Time limit for indicat-ing cell broadcast interruptions to CBC

CHAINED_CELL_USAGE_P

0024 010 M The usage of chained cells in rapid field drop

CHAN_FIN_USAGE_P 0065 010 M Channel Finder mea-surement, use of

CHA_CONC_DL_TBF_FAV_DIR

0101 046 M CHA_CONC_DL_TBF_FAVOR_DIR

CHA_CONC_UL_TBF_FAV_DIR

0100 046 M CHA_CONC_UL_TBF_FAVOR_DIR

CHILD_CELL_BAR 0857 002 No Child Cell Barred Check

CHKSUM_SUPERV_INTERVAL

0052 009 M Checksum supervi-sion interval

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 260: 10

260 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a2Confidential

PRFILE and FIFILE parameter index by parameter name

CITARX_USAGE 0764 002 No CITARX usage

CI_BASED_HO_EVAL_P

0019 010 M C/I based HO candi-date evaluation

CI_STATISTICS_USAGE_P

0036 010 M C/I Ratio Statistics

CM_BASED_SUBS_TYPE

0011 010 M Classmark-based subscriber type

COMBI_CONF_ALLOWED

1167 002 M Combi BSC3i/TCSM3i con-figuration allowed

COMMON_BCCH_EGSM900

0664 002 No COMMON BCCH EGSM900

COMMON_BCCH_GSM1800

0667 002 No COMMON BCCH GSM1800

COMMON_BCCH_GSM1900

0734 002 No COMMON BCCH GSM1900

COMMON_BCCH_GSM800

0733 002 No COMMON BCCH GSM800

COMMON_BCCH_GSM900

0666 002 No COMMON BCCH GSM900

CONF_INTERFACES_FEATURE

0005 058 No Configurable O&M Interfaces Feature

CONVERSATIONAL_ARP1

0052 049 M Priority class conver-sational and traffic class 1

CONVERSATIONAL_ARP2

0053 049 M Priority class conver-sational and traffic class 2

CONVERSATIONAL_ARP3

0054 049 M Priority class conver-sational and traffic class 3

CRC4_TRH_FOR_DEGRAD_MIN

0010 009 F Threshold value for degraded minutes

CRC4_TRH_FOR_ERRORE_SEC

0011 009 F Threshold value for errored seconds

DAC_USAGE 0626 002 No Defined Adjacent Cell measurement, use of

DADLB_USAGE_P 0050 010 M Direct Access to Desired Layer/Band Usage

DATA_144_USAGE 0048 010 M 14.4 kbit/s in BSC

DC_OBSERVATION_USAGE

0051 010 M Use of Trace Window for Dropped Calls feature

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 261: 10

DN9979835 261

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parametername

Id:0900d8058075d0a2Confidential

DEF_MAIN_HEADING_TEXT

0006 044 M The default NE name text used in main heading printout

DISCLAIMER_TEXT 0005 044 M Activation parameter for feature MMI Dis-claimer Display

DISTANCE_VERIFYING

0030 010 M Distance Verifying

DL_DTM_TBF_REL_DELAY

0116 046 M Downlink temporary block flow release delay for DTM call

DL_TBF_RELEASE_DELAY

0067 046 M Downlink temporary block flow release delay

DOUBLE_BA_LIST 0093 002 No Double BCCH alloca-tion list

DR_USAGE 0005 010 M Directed Retry

DSCP_FOR_SIGNALLING

0009 053 M Differentiated Services codepoint for signalling traffic

DTM_CALL_ASSIGN_TIMER

0105 046 M DTM call assignment timer

DTM_CALL_PENALTY_TIMER

0071 010 M DTM call assignment penalty timer

DTM_MS_CL_11_SUPP_EDA

0107 046 M DTM Multislot Class 11 mobile extended dynamic allocation mode support

DUAL_BAND_USAGE_P

0026 010 M Dual Band GSM/DCS Network Operation usage

DYNAMIC_SDCCH 0042 010 M Dynamic SDCCH in BSC

DYN_ABIS_IN_USE 0644 002 No Dynamic Abis alloca-tion in use

EFR_SUPPORT_IN_BSC

0033 010 M EFR speech coder support in BSC

EGPRS_DL_MUX_DEC_FACTOR

0093 046 M EGPRS DL MUX DEC FACTOR

EGPRS_DOWNLINK_PENALTY

0049 046 M EGPRS downlink penalty

EGPRS_DWNLINK_THRESHOLD

0050 046 M EGPRS downlink threshold

EGPRS_GPRS_MUX_PENALTY

0091 046 M EGPRS GPRS MUX PENALTY

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 262: 10

262 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a2Confidential

PRFILE and FIFILE parameter index by parameter name

EGPRS_UPLINK_PENALTY

0047 046 M EGPRS uplink penalty

EGPRS_UPLINK_THRESHOLD

0048 046 M EGPRS uplink thresh-old

EMR_RESTRICTED 1264 002 No EMR activation restricted in BSC

EMR_SUPPORT_IN_BSC

0776 002 No Support for Enhanced Measurement Report

EQOS_TESTING_MODE

1114 002 No Allowing configure PCU2 with EQoS enabled in a same track with PCUs.

ERFD_USAGE_P 0046 010 M Enhanced Rapid Field Drop

EXCL_EST_CAUSES_HO_REF

0044 009 M Exclusion of estab-lishment cause values from handover refer-ence.

EXT_CELL_USAGE_P 0020 010 M The usage of extended cell radius

EXT_UTBF_USAGE 0899 002 No Extended uplink TBF mode feature usage

FACCH_CALL_SET_UP

0015 010 M FACCH call set-up in use

FCS_SET_USAGE 0052 010 M Usage of the feature Flexible counter selection set

FC_B_MAX_TSL 0028 049 M GPRS timeslot buffer-ing capacity

FC_B_MAX_TSL_EGPRS

0029 049 M EGPRS timeslot buff-ering capacity

FC_MS_B_MAX_DEF 0024 049 M Buffering capacity default value

FC_MS_B_MAX_DEF_EGPRS

0025 049 M Buffering capacity default value

FC_MS_R_DEF 0021 049 M MS-specific leak rate default value

FC_MS_R_DEF_EGPRS

0022 049 M MS-specific leak rate default value for EGPRS

FC_MS_R_MIN 0023 049 M Minimum value of MS leak rate

FC_R_DIF_TRG_LIMIT 0020 049 M R_dif limit value

FC_R_TSL 0026 049 M GPRS timeslot trans-mission capacity

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 263: 10

DN9979835 263

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parametername

Id:0900d8058075d0a2Confidential

FC_R_TSL_EGPRS 0027 049 M EGPRS timeslot transmission capacity

FER_USAGE 0628 002 No FER measurement

FH_IUO_USAGE 0417 002 No Frequency hopping for intelligent underlay overlay usage.

FIRST_FREE_NUMBERED_CGR

0693 002 M First allowed circuit group number for free numbered circuit groups.

FIRST_MMI_LOGIN_DELAY

0001 044 M First login delay in MMI User Identifica-tion.

FLEX_MAIO_USAGE 0466 002 No Flexible maio man-agement usage.

FMMS_USAGE_P 0025 010 M Fast Moving MS Handling Usage

GPRS_DOWNLINK_PENALTY

0053 046 M GPRS downlink parameters

GPRS_DOWNLINK_THRESHOLD

0054 046 M GPRS downlink threshold

GPRS_UL_MUX_DEC_FACTOR

0092 046 M GPRS UL MUX DEC FACTOR

GPRS_UPLINK_PENALTY

0051 046 M GPRS uplink penalty

GPRS_UPLINK_THRESHOLD

0052 046 M GPRS uplink thresh-old

GSM800_1800_USAGE

0738 002 No Dual Band for GSM800/GSM1800 usage

GSM800_1900_USAGE

0737 002 No Dual Band for GSM800/GSM1900 usage

HOT_SPOT_USAGE_P

0035 010 M Hot Spot Location usage

HR_FEATURE_IN_BSC

0283 002 No Half Rate feature installed in BSC

HSCSD_USAGE 0047 010 M HSCSD in BSC

HW_CHANGE_NOTIF_IN_USE

0921 002 M Equipment database change notifications ON/OFF

HW_INVENTORY_IN_USE

0790 002 M HW Inventory ON/OFF

IBNACC_POLLING_TIME

0109 046 M IBNACC polling time

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 264: 10

264 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a2Confidential

PRFILE and FIFILE parameter index by parameter name

ICE_USAGE_P 0045 010 M Handover Support for Coverage Enhance-ments

IDR_USAGE 0006 010 M Intelligent Directed Retry

INC_SIGNAL_WAITING_TIME

0036 037 F Incoming signal waiting time

INTERACT_PRIOR_1_ARP1

0058 049 M Priority class interac-tive 1 and traffic class 1

INTERACT_PRIOR_1_ARP2

0059 049 M Priority class interac-tive 1 and traffic class 2

INTERACT_PRIOR_1_ARP3

0060 049 M Priority class interac-tive 1 and traffic class 3

INTERACT_PRIOR_2_ARP1

0061 049 M Priority class interac-tive 2 and traffic class 1

INTERACT_PRIOR_2_ARP2

0062 049 M Priority class interac-tive 2 and traffic class 2

INTERACT_PRIOR_2_ARP3

0063 049 M Priority class interac-tive 2 and traffic class 3

INTERACT_PRIOR_3_ARP1

0064 049 M Priority class interac-tive 3 and traffic class 1

INTERACT_PRIOR_3_ARP2

0065 049 M Priority class interac-tive 3 and traffic class 2

INTERACT_PRIOR_3_ARP3

0066 049 M Priority class interac-tive 3 and traffic class 3

ISHO_SUPPORT_IN_BSC

0739 002 No Inter-System HO support in BSC

IUO_RECOVERY_NOT_DONE

0039 037 M IUO_RECOVERY_NOT_DONE

LAMP_PANEL_BUZZER

0003 016 M Activation of lamp panel buzzer by alarms

LAMP_PANEL_POLARITY

0001 016 M Lamp panel polarity

LAN_ADMINISTRATION

1120 002 M Integrated LAN Administration feature activation

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 265: 10

DN9979835 265

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parametername

Id:0900d8058075d0a2Confidential

LBNCCR_MIN_INTERVAL_PLR

0110 046 M LBNCCR Minimum Interval Between PS Load Reports

LB_PLUS 0750 002 No Position Based Services

LB_STACK_IN_BCSU 0829 002 No Position Based Services

LB_USAGE 0749 002 No Position Based Services

LMUSYN_LOSS_ALARM_LIMIT

0043 037 M LOSS OF LMU SYN-CHRONISATION ALARM LIMIT

LMUSYN_LOSS_C_RESET_LIM

0046 037 M TIME LIMIT FOR METROSITE BCF RESTART DUE TO LOSS OF LMU SYNC

LMUSYN_LOSS_RESET_LIMIT

0044 037 M TIME LIMIT FOR ULTRASITE BCF RESTART DUE TO LOSS OF LMU SYNC

LOAD_RATE_SAMPLE_INTERV

0008 009 M Processor load rate measurement interval

LOG_ON 0000 056 M Service terminal commands collecting allowed

MAX_BSC_TRE_SW_DL_COUNT

0040 037 M BSC site maximum concurrent software downloading count

MAX_BTS_TRE_SW_DL_COUNT

0041 037 M BTS site maximum concurrent software downloading count

MAX_FILE_COUNT 0002 038 M MML Command Log and Service Terminal Log: Maximum file count

MAX_LAPD_LENGHT 0106 046 M Maximum LAPD message length

MAX_MMI_LOGIN_DELAY

0002 044 M Maximum login delay in MMI User Identifi-cation.

MEA_REPORT_FORMATS

0001 050 M Measurement Report Formats

MEMORY_OUT_FLAG_SUM

0046 046 M Memory out flag sum

MSC_SERVER_SUPPORTED

0000 053 No MSC Server function-ality active

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 266: 10

266 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a2Confidential

PRFILE and FIFILE parameter index by parameter name

MS_CAP_IND_USAGE 0558 002 No Authorisation of the use of the MS Capa-bility Indication mea-surement

MS_PWR_OPT_IN_HO_P

0021 010 M MS power optimiza-tion in handover

MULTI_BCF 0668 002 No MULTI BCF

NAMETBL_MAX_SERV

0039 012 M Maximum amount of services in nametable

NCCR_MEAS_REPORT_TYPE

0097 046 M NCCR measurement report type

NCCR_NON_DRX_PERIOD

0096 046 M NCCR Non DRX Period

NE3S_ATL 0015 060 M NE3S Audit Trail in use

NE3S_CM 0009 060 M NE3S CM in use

NE3S_FM 0007 060 M NE3S FM in use

NE3S_HW 0012 060 M NE3S HW in use

NE3S_LM 0011 060 M NE3S LM in use

NE3S_PM 0008 060 M NE3S PM in use

NE3S_SW 0010 060 M NE3S SW in use

NE3S_TRACE 0014 060 M NE3S Trace in use

NE3S_UM 0013 060 M NE3S UM in use

NEMU_IS_PRESENT 0711 002 M NEMU is present in the network element

NOISE_SUPPRESSION_USAGE

0623 002 No Noise Suppression, use of

NORTH_AMERICAN_NUMBER

0361 002 M North American (World Zone 1) num-bering

NS_ALIVE_RETRIES 0007 049 M NS alive retries

NS_BLOCK_RETRIES 0005 049 M NS block retries

NS_RESET_RETRIES 0008 049 M NS reset retries

NS_UNBLOCK_RETRIES

0006 049 M NS unblock retries

NUMBER_OF_Q1_CHANNELS

0075 009 M Number of Q1 channels to be reserved

OVERFLOW_LOGIN_DELAY

0003 044 M Overflow login delay in MMI User Identifi-cation

PBS_USAGE 0654 002 No Position Based Services

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 267: 10

DN9979835 267

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parametername

Id:0900d8058075d0a2Confidential

PCM_MAINT_ANNOUNCE_TL

0004 010 F Start time of the prompt maintenance alarm indication

PFC_PFT_LEGACY_STRM

0090 046 M PFC PFT LEGACY STRM

PFC_PFT_MAX_NRT 0102 046 M PFC_PFT_MAX_NRT

PFC_PFT_MAX_RT 0103 046 M PFC_PFT_MAX_RT

POLLING_INTERVAL_BG

0087 046 M POLLING INTERVAL BG

POLLING_INTERVAL_BG_LOW

0113 046 M POLLING INTERVAL BG LOW

POLLING_INTERVAL_IA

0086 046 M POLLING INTERVAL IA

POLLING_INTERVAL_IA_LOW

0114 046 M POLLING INTERVAL IA LOW

POLLING_INTERVAL_STRM

0085 046 M POLLING INTERVAL STRM

POLLING_INTERVAL_ST_LOW

0115 046 M POLLING INTERVAL ST LOW

PREEMPT_USAGE 0016 010 M Preemption usage.

PRE_EMPTIVE_TRANSMISSIO

0064 046 M Pre-emptive trans-mission

PRIMARY_RATE_INTERFACE

0035 002 F Exchange has possi-bility to primary rate interface connections

PRIOR_BASED_SERV_SEP

0012 010 M Priority-based service separation

PS_NULL_NRI_SUPPORT

0082 049 M PS_NULL_NRI support

PW_CHAR_TO_PRINT 0000 044 M Character to be printed on terminal when entering pass-word.

PW_POLICY_FEATURE

0000 058 No Password Policy Feature

Q3_BTS_HW_REM_INQ_USE

0032 010 M Remote interrogation of the BTS serial and version numbers feature

Q3_CM 0002 060 M Q3 CM in use

Q3_DX_ALARMS_FORW_ON

0241 002 M Q3 DX alarm forward-ing enabled

Q3_FM 0000 060 M Q3 FM in use

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 268: 10

268 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a2Confidential

PRFILE and FIFILE parameter index by parameter name

Q3_HW 0004 060 M Q3 HW in use

Q3_IN_USE 0814 002 M Q3 Interface in Use

Q3_PM 0001 060 M Q3 PM in use

Q3_SW 0003 060 M Q3 SW in use

Q3_TRACE 0005 060 M Q3 Trace in use

Q3_UM 0006 060 M Q3 UM in use

QOS_UPGRADE_TIME

0111 046 M QoS upgrade time

RAC_UPDATE_RETRIES

0038 049 M RAC UPDATE RETRIES

RCS_FER_FILTER 0068 010 M Data filtering from FER measurement

REMOTE_MMI 0173 002 No Remote MMI flag

RESEGMENT_MODE 0119 046 M Resegment mode selector

RESUME_RETRIES 0072 049 M Resume retries

REV_HUNT_USED 0643 002 No Reversed hunting

RNOS_USAGE_P 0027 010 M Radio Network Opti-mization Statistics Usage

RNW_OM_LOG_USAGE

1475 002 No Automated RNW O&M log collection feature control usage

RXQ_HAC_USAGE_P 0028 010 M RX Quality Statistics and Handover Adjacent Cell Mea-surement

S9_LOCATION_SYSTEM

0701 002 No Cell ID, TA and RxLevel delivery to Standalone SMLC

SATELL_ABIS_IN_USE

0031 010 M Satellite Abis

SDCCH_HO_USAGE_P

0022 010 M SDCCH Handover

SDCCH_SIGN_SUP_BTS_MSC

0098 009 M Guard timer for long SDCCH reservations

SEC_EVENT_ALARM_LIMIT

0028 009 M Security event alarm limit

SEC_EVENT_LOAD_LIMIT

0137 009 M Security reporting event load limit

SEC_EVENT_MON_PERIOD

0029 009 M Monitoring period for number of security events

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 269: 10

DN9979835 269

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parametername

Id:0900d8058075d0a2Confidential

SEC_EVENT_UNSUC_LIMIT

0138 009 M Unsuccessful security reporting event alarm limit

SEGMENT_USAGE 0665 002 No SEGMENT USAGE

SEL_OCTFIL_VARIANT_TO

1554 002 M Select OCTFIL variant to use

SFTP_SERVER_FEATURE

0003 058 No SFTP Server feature

SMSCB_INDEPEN_MULTIPAGE

0470 002 M SMS CB pages con-sidered independent by the BSC

SMSCB_LAST_BLOCK_INFO

0418 002 M SMS CB last block information used in BSC

SMS_CBC_USD_IN_BSC

0044 010 M Use of CBC interface in BSC

SMS_CB_DRX_USD_IN_BSC

0034 010 M SMS CB DRX in BSC; Usage

SNS_ADD_RETRIES 0032 049 M Sub-network service add retries

SNS_CHANGEWEIGHTS_RETRI

0034 049 M Sub-network service changeweights retries

SNS_CONFIG_RETRIES

0033 049 M Sub-network service config retries

SNS_DELETE_RETRIES

0035 049 M Sub-network service delete retries

SNS_SIZE_RETRIES 0036 049 M Sub-network service size retries

SSH_SERVER_FEATURE

0002 058 No Secure Shell (SSH) Server feature

STORAGE_LENGTH 0001 038 M MML Command Log: storage length of log contents

STREAMING_ARP1 0055 049 M Priority class stream-ing and traffic class 1

STREAMING_ARP2 0056 049 M Priority class stream-ing and traffic class 2

STREAMING_ARP3 0057 049 M Priority class stream-ing and traffic class 3

SUSPEND_PCU_LOAD_NOTIF

0099 046 M PCU Load Notification lifetime

SUSPEND_RETRIES 0016 049 M Suspend retries

SYNC_RECOV_ENABLED

0042 037 M SYNC_RECOV_ENABLED

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 270: 10

270 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a2Confidential

PRFILE and FIFILE parameter index by parameter name

T1_ENVIRONMENT 0188 002 F T1 environment

TBF_LOAD_GUARD_THRSHLD

0061 046 M TBF load guard threshold

TBF_SIGNAL_GRD_THRSHLD

0062 046 M TBF signal guard threshold

TERRIT_BALANCE_THRSHLD

0059 046 M Territory balance threshold

TERRIT_UPD_GTIME_GPRS

0060 046 M GPRS territory update guard time

TFO_USAGE 0372 002 No Use of Tandem-Free Operation

TGB_BLOCK 0009 049 M Timer of GB block

TGB_RAC_UPDATE 0037 049 M TGB RAC UPDATE

TGB_RESET 0010 049 M Timer for Gb reset

TGB_RESUME 0073 049 M Timer for Gb resume

TGB_SUSPEND 0011 049 M Timer for Gb suspend

THREE_DIGIT_MNC 0399 002 No Three digit MNC

TNS_ALIVE 0003 049 M Timer for NS level alive procedure

TNS_BLOCK 0000 049 M NS level block timer

TNS_RESET 0001 049 M Timer for NS level reset

TNS_TEST 0002 049 M Timer for NS level test

TOTAL_FEP_USAGE 0820 002 No Total FEP usage

TRANSM_EQ_MML_ENABLE

0094 002 No BSS Transmission Equipment Handling MML enabling param-eter

TRE_CHKSUM_COLL_COUNT

0079 009 M Transmission equip-ment checksum col-lection count

TRE_SW_DL_MC_ADDRESS

0602 002 M Transmission equip-ment software download multicast address

TR_EQU_COLL_START_TIM

0055 009 M Starting Time of Exis-tence Data Collection of BTS-Controlled Transmission Equip-ment

TR_USAGE 0008 010 M Trunk Reservation

TR_USAGE_IN_MTC 0007 010 M Trunk Reservation in mobile terminated call

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 271: 10

DN9979835 271

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parametername

Id:0900d8058075d0a2Confidential

TSNS_PROV 0031 049 M Timer for sub-network service procedures

TTY_USAGE 0702 002 No Text Telephone (TTY)

UA_POLICY_FEATURE

0001 058 No User Account Policy Feature

UL_DTM_TBF_RELDELAY_EXT

0117 046 M Uplink TBF release delay for DTM call in extended mode

UL_DTM_TBF_REL_DELAY

0118 046 M Uplink temporary block flow release delay for DTM call

UL_TBF_RELEASE_DELAY

0068 046 M Uplink temporary block flow release delay

UL_TBF_REL_DELAY_EXT

0071 046 M Uplink TBF release delay in extended mode

UL_TBF_SCHED_RATE_EXT

0072 046 M Uplink TBF schedul-ing rate in extended mode release delay

UNDERLAY_OVERLAY_US_P

0023 010 M Intelligent underlay-overlay

UPLNK_RX_LEV_FRG_FACTOR

0055 046 M Uplink Rx-level forget-ting factor

USER_ACCOUNT_LOCK_LIMIT

0004 058 M User Account Lock Limit

UTDOA_COMMERCIAL

1006 002 No Support for the com-mercial location request in UTDOA system

UTDOA_SUPPORT 0905 002 No Support for the UTDOA system

WRITE_CACHE_TIMEOUT

0000 038 M MML Command Log: write cache timeout

Name Number Class F/M Function

Table 7 Index by parameter name. (Cont.)

Page 272: 10

272 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a5Confidential

PRFILE and FIFILE parameter index by parameter function

6 PRFILE and FIFILE parameter index by parameter function

Function Number Class F/M Name

1. attenuated channel number

0003 037 F ATTENUATED_CH_NBR_1

10. attenuated channel number

0012 037 F ATTENUATED_CH_NBR_10

11. attenuated channel number

0013 037 F ATTENUATED_CH_NBR_11

12. attenuated channel number

0014 037 F ATTENUATED_CH_NBR_12

13. attenuated channel number (spare)

0015 037 F ATTENUATED_CH_NBR_13

14. attenuated channel number (spare)

0016 037 F ATTENUATED_CH_NBR_14

14.4 kbit/s in BSC 0048 010 M DATA_144_USAGE

15. attenuated channel number (spare)

0017 037 F ATTENUATED_CH_NBR_15

16. attenuated channel number (spare)

0018 037 F ATTENUATED_CH_NBR_16

17. attenuated channel number (spare)

0019 037 F ATTENUATED_CH_NBR_17

2. attenuated channel number

0004 037 F ATTENUATED_CH_NBR_2

3. attenuated channel number

0005 037 F ATTENUATED_CH_NBR_3

4. attenuated channel number

0006 037 F ATTENUATED_CH_NBR_4

5. attenuated channel number

0007 037 F ATTENUATED_CH_NBR_5

6. attenuated channel number

0008 037 F ATTENUATED_CH_NBR_6

7. attenuated channel number

0009 037 F ATTENUATED_CH_NBR_7

8. attenuated channel number

0010 037 F ATTENUATED_CH_NBR_8

9. attenuated channel number

0011 037 F ATTENUATED_CH_NBR_9

Table 8 Index by parameter function.

Page 273: 10

DN9979835 273

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterfunction

Id:0900d8058075d0a5Confidential

Activation of lamp panel buzzer by alarms

0003 016 M LAMP_PANEL_BUZZER

Activation parame-ter for feature MMI Disclaimer Display

0005 044 M DISCLAIMER_TEXT

Advanced Multi-layer Handling Usage

0053 010 M AMH_USAGE_P

Alarm print end mark

0000 016 M ALARM_PRINT_END_MARK

Allowing configure PCU2 with EQoS enabled in a same track with PCUs.

1114 002 No EQOS_TESTING_MODE

Antenna hopping for UltraSite

0809 002 No ANTENNA_HOPPING_USAGE

Attenuated channel number 128

0026 037 F ATT_850_CH_NBR_1

Attenuated channel number 181

0027 037 F ATT_850_CH_NBR_2

Attenuated channel number 183

0028 037 F ATT_850_CH_NBR_3

Attenuated channel number 231

0029 037 F ATT_850_CH_NBR_4

Attenuated channel number 233

0030 037 F ATT_850_CH_NBR_5

Attenuated channel number 251

0033 037 F ATT_850_CH_NBR_8

Attenuated second spare channel number

0035 037 F ATT_850_CH_NBR_10

Attenuated spare channel number

0034 037 F ATT_850_CH_NBR_9

Attenuation value for InSite BTS

0025 037 F ATTN_FOR_INSITE_BTS

Attenuation value for MetroSite BTS

0022 037 F ATTN_FOR_METROSITE_BTS

Attenuation value for 2nd generation BTS

0000 037 F ATTN_FOR_2_GEN_BTS

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 274: 10

274 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a5Confidential

PRFILE and FIFILE parameter index by parameter function

Attenuation value for PrimeSite BTS

0002 037 F ATTN_FOR_4_GEN_BTS

Attenuation value for Talk-family BTS

0001 037 F ATTN_FOR_3_GEN_BTS

Attenuation value for UltraSite BTS

0024 037 F ATTN_FOR_ULTRASITE_BTS

Attenuation value for UltraSite BTS

0037 037 F ATTN_FOR_800_CH_6_ULTRA

Attenuation value for UltraSite BTS

0038 037 F ATTN_FOR_800_CH_7_ULTRA

Authorisation of the use of the MS Capability Indica-tion measurement

0558 002 No MS_CAP_IND_USAGE

Automated RNW O&M log collection feature control usage

1475 002 No RNW_OM_LOG_USAGE

Base Station alarm filtering in BSC, use of

0007 016 M BTS_ALARM_FILTERING_USE

BCCH band TBF threshold

0066 046 F BCCH_BAND_TBF_THRSHLD

Binary report header type

0461 002 M BIN_HEADER_TYPE

Bitmap supervi-sion interval

0051 009 M BITMAP_SUPERV_INTERVAL

BSC site maximum concurrent software down-loading count

0040 037 M MAX_BSC_TRE_SW_DL_COUNT

BSC Support for Autoconfiguration: Abis autoconfigu-ration in use

0511 002 F ABIS_AUTOCONF_IN_USE

BSR Usage 0947 002 No BSR_SUPPORT_IN_BSC

BSS Transmission Equipment Handling MML enabling parame-ter

0094 002 No TRANSM_EQ_MML_ENABLE

BTS DLDC TSL BALANCE THRESHOLD

0126 046 M BTS_DLDC_TSL_BALANC_THR

BTS HW Database Q3 Interface appli-cation is in use

0444 002 No BTS_HW_DB_Q3_INT_IN_USE

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 275: 10

DN9979835 275

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterfunction

Id:0900d8058075d0a5Confidential

BTS site battery backup procedure

0037 009 M BTS_SITE_BATBU_PROC

BTS site maximum concurrent software down-loading count

0041 037 M MAX_BTS_TRE_SW_DL_COUNT

Buffering capacity default value

0024 049 M FC_MS_B_MAX_DEF

Buffering capacity default value

0025 049 M FC_MS_B_MAX_DEF_EGPRS

BVC block retries 0013 049 M BVC_BLOCK_RETRIES

BVC reset retries 0015 049 M BVC_RESET_RETRIES

BVC unblock retries

0014 049 M BVC_UNBLOCK_RETRIES

C/I based HO can-didate evaluation

0019 010 M CI_BASED_HO_EVAL_P

C/I Ratio Statistics 0036 010 M CI_STATISTICS_USAGE_P

C2 microcell re-selection parame-ter in use

0014 010 M C2_CELL_RESEL

Cell ID, TA and RxLevel delivery to Standalone SMLC

0701 002 No S9_LOCATION_SYSTEM

Channel Finder measurement, use of

0065 010 M CHAN_FIN_USAGE_P

Character to be printed on terminal when entering password.

0000 044 M PW_CHAR_TO_PRINT

Checksum supervi-sion interval

0052 009 M CHKSUM_SUPERV_INTERVAL

Child Cell Barred Check

0857 002 No CHILD_CELL_BAR

CHA_CONC_DL_TBF_FAVOR_DIR

0101 046 M CHA_CONC_DL_TBF_FAV_DIR

CHA_CONC_UL_TBF_FAVOR_DIR

0100 046 M CHA_CONC_UL_TBF_FAV_DIR

CITARX usage 0764 002 No CITARX_USAGE

Classmark-based subscriber type

0011 010 M CM_BASED_SUBS_TYPE

Combi BSC3i/TCSM3i configuration allowed

1167 002 M COMBI_CONF_ALLOWED

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 276: 10

276 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a5Confidential

PRFILE and FIFILE parameter index by parameter function

COMMON BCCH EGSM900

0664 002 No COMMON_BCCH_EGSM900

COMMON BCCH GSM1800

0667 002 No COMMON_BCCH_GSM1800

COMMON BCCH GSM1900

0734 002 No COMMON_BCCH_GSM1900

COMMON BCCH GSM800

0733 002 No COMMON_BCCH_GSM800

COMMON BCCH GSM900

0666 002 No COMMON_BCCH_GSM900

Configurable O&M Interfaces Feature

0005 058 No CONF_INTERFACES_FEATURE

Creating more than 16 TRXs in a BCSU

0380 002 No ALLOW_OVER_16TRX

Data filtering from FER measurement

0068 010 M RCS_FER_FILTER

Defined Adjacent Cell measurement, use of

0626 002 No DAC_USAGE

Differentiated Services code-point for signalling traffic

0009 053 M DSCP_FOR_SIGNALLING

Direct Access to Desired Layer/Band Usage

0050 010 M DADLB_USAGE_P

Directed Retry 0005 010 M DR_USAGE

Distance Verifying 0030 010 M DISTANCE_VERIFYING

Double BCCH allo-cation list

0093 002 No DOUBLE_BA_LIST

Downlink tempo-rary block flow release delay

0067 046 M DL_TBF_RELEASE_DELAY

Downlink tempo-rary block flow release delay for DTM call

0116 046 M DL_DTM_TBF_REL_DELAY

DTM call assign-ment penalty timer

0071 010 M DTM_CALL_PENALTY_TIMER

DTM call assign-ment timer

0105 046 M DTM_CALL_ASSIGN_TIMER

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 277: 10

DN9979835 277

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterfunction

Id:0900d8058075d0a5Confidential

DTM Multislot Class 11 mobile extended dynamic allocation mode support

0107 046 M DTM_MS_CL_11_SUPP_EDA

Dual Band for GSM800/GSM1800 usage

0738 002 No GSM800_1800_USAGE

Dual Band for GSM800/GSM1900 usage

0737 002 No GSM800_1900_USAGE

Dual Band GSM/DCS Network Operation usage

0026 010 M DUAL_BAND_USAGE_P

Dynamic Abis allo-cation in use

0644 002 No DYN_ABIS_IN_USE

Dynamic SDCCH in BSC

0042 010 M DYNAMIC_SDCCH

EFR speech coder support in BSC

0033 010 M EFR_SUPPORT_IN_BSC

EGPRS downlink penalty

0049 046 M EGPRS_DOWNLINK_PENALTY

EGPRS downlink threshold

0050 046 M EGPRS_DWNLINK_THRESHOLD

EGPRS DL MUX DEC FACTOR

0093 046 M EGPRS_DL_MUX_DEC_FACTOR

EGPRS GPRS MUX PENALTY

0091 046 M EGPRS_GPRS_MUX_PENALTY

EGPRS timeslot buffering capacity

0029 049 M FC_B_MAX_TSL_EGPRS

EGPRS timeslot transmission capacity

0027 049 M FC_R_TSL_EGPRS

EGPRS uplink penalty

0047 046 M EGPRS_UPLINK_PENALTY

EGPRS uplink threshold

0048 046 M EGPRS_UPLINK_THRESHOLD

EMR activation restricted in BSC

1264 002 No EMR_RESTRICTED

Enhanced Rapid Field Drop

0046 010 M ERFD_USAGE_P

Equipment database change notifications ON/OFF

0921 002 M HW_CHANGE_NOTIF_IN_USE

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 278: 10

278 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a5Confidential

PRFILE and FIFILE parameter index by parameter function

Exchange has pos-sibility to primary rate interface con-nections

0035 002 F PRIMARY_RATE_INTERFACE

Exclusion of estab-lishment cause values from handover refer-ence.

0044 009 M EXCL_EST_CAUSES_HO_REF

Extended uplink TBF mode feature usage

0899 002 No EXT_UTBF_USAGE

Fast Moving MS Handling Usage

0025 010 M FMMS_USAGE_P

FACCH call set-up in use

0015 010 M FACCH_CALL_SET_UP

FER measurement 0628 002 No FER_USAGE

First allowed circuit group number for free numbered circuit groups.

0693 002 M FIRST_FREE_NUMBERED_CGR

First login delay in MMI User Identifi-cation.

0001 044 M FIRST_MMI_LOGIN_DELAY

Flexible maio man-agement usage.

0466 002 No FLEX_MAIO_USAGE

Frequency hopping for intelligent underlay overlay usage.

0417 002 No FH_IUO_USAGE

GPRS downlink parameters

0053 046 M GPRS_DOWNLINK_PENALTY

GPRS downlink threshold

0054 046 M GPRS_DOWNLINK_THRESHOLD

GPRS territory update guard time

0060 046 M TERRIT_UPD_GTIME_GPRS

GPRS timeslot buffering capacity

0028 049 M FC_B_MAX_TSL

GPRS timeslot transmission capacity

0026 049 M FC_R_TSL

GPRS uplink penalty

0051 046 M GPRS_UPLINK_PENALTY

GPRS uplink threshold

0052 046 M GPRS_UPLINK_THRESHOLD

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 279: 10

DN9979835 279

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterfunction

Id:0900d8058075d0a5Confidential

GPRS UL MUX DEC FACTOR

0092 046 M GPRS_UL_MUX_DEC_FACTOR

Guard timer for long SDCCH reser-vations

0098 009 M SDCCH_SIGN_SUP_BTS_MSC

Half Rate feature installed in BSC

0283 002 No HR_FEATURE_IN_BSC

Handover Support for Coverage Enhancements

0045 010 M ICE_USAGE_P

Hot Spot Location usage

0035 010 M HOT_SPOT_USAGE_P

HSCSD in BSC 0047 010 M HSCSD_USAGE

HW Inventory ON/OFF

0790 002 M HW_INVENTORY_IN_USE

IBNACC polling time

0109 046 M IBNACC_POLLING_TIME

Incoming signal waiting time

0036 037 F INC_SIGNAL_WAITING_TIME

Integrated LAN Administration feature activation

1120 002 M LAN_ADMINISTRATION

Intelligent Directed Retry

0006 010 M IDR_USAGE

Intelligent Shutdown for Met-roSite BTS

0839 002 No BTS_METRO_SITE_BATBU_PR

Intelligent Shutdown for Ultra-Site BTS

0843 002 No BTS_ULTRA_SITE_BATBU_PR

Intelligent underlay-overlay

0023 010 M UNDERLAY_OVERLAY_US_P

Inter-System HO support in BSC

0739 002 No ISHO_SUPPORT_IN_BSC

IUO_RECOVERY_NOT_DONE

0039 037 M IUO_RECOVERY_NOT_DONE

Lamp panel polarity

0001 016 M LAMP_PANEL_POLARITY

Larger Capacity BSC: Creation of 48 TRXs (BSCE) and 64 TRXs (BSC2E/A ) in a BCSU

0500 002 No ALLOW_48_OR_64_TRX

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 280: 10

280 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a5Confidential

PRFILE and FIFILE parameter index by parameter function

LBNCCR Minimum Interval Between PS Load Reports

0110 046 M LBNCCR_MIN_INTERVAL_PLR

LOSS OF LMU SYNCHRONISA-TION ALARM LIMIT

0043 037 M LMUSYN_LOSS_ALARM_LIMIT

Maximum amount of services in nametable

0039 012 M NAMETBL_MAX_SERV

Maximum count of bytes checked in one bitmap super-vision interval

0050 009 M BITMAP_CHECK_BYTES

Maximum count of records checked in one bitmap super-vision interval

0049 009 M BITMAP_CHECK_RECORDS

Maximum login delay in MMI User Identification.

0002 044 M MAX_MMI_LOGIN_DELAY

Maximum LAPD message length

0106 046 M MAX_LAPD_LENGHT

Measurement Report Formats

0001 050 M MEA_REPORT_FORMATS

Memory out flag sum

0046 046 M MEMORY_OUT_FLAG_SUM

Minimum value of MS leak rate

0023 049 M FC_MS_R_MIN

MML Command Log and Service Terminal Log: Minutes part of administration time

0004 038 M ADMINISTRATION_MINUTES

MML Command Log and Service Terminal Log: Maximum file count

0002 038 M MAX_FILE_COUNT

MML Command Log: Hour part of administration time

0003 038 M ADMINISTRATION_HOUR

MML Command Log: storage length of log contents

0001 038 M STORAGE_LENGTH

MML Command Log: write cache timeout

0000 038 M WRITE_CACHE_TIMEOUT

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 281: 10

DN9979835 281

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterfunction

Id:0900d8058075d0a5Confidential

Monitoring period for number of security events

0029 009 M SEC_EVENT_MON_PERIOD

MS-specific leak rate default value

0021 049 M FC_MS_R_DEF

MS-specific leak rate default value for EGPRS

0022 049 M FC_MS_R_DEF_EGPRS

MS power optimi-zation in handover

0021 010 M MS_PWR_OPT_IN_HO_P

MSC Server func-tionality active

0000 053 No MSC_SERVER_SUPPORTED

MULTI BCF 0668 002 No MULTI_BCF

NCCR measure-ment report type

0097 046 M NCCR_MEAS_REPORT_TYPE

NCCR Non DRX Period

0096 046 M NCCR_NON_DRX_PERIOD

NE3S Audit Trail in use

0015 060 M NE3S_ATL

NE3S CM in use 0009 060 M NE3S_CM

NE3S FM in use 0007 060 M NE3S_FM

NE3S HW in use 0012 060 M NE3S_HW

NE3S LM in use 0011 060 M NE3S_LM

NE3S PM in use 0008 060 M NE3S_PM

NE3S SW in use 0010 060 M NE3S_SW

NE3S Trace in use 0014 060 M NE3S_TRACE

NE3S UM in use 0013 060 M NE3S_UM

NEMU is present in the network element

0711 002 M NEMU_IS_PRESENT

Noise Suppres-sion, use of

0623 002 No NOISE_SUPPRESSION_USAGE

North American (World Zone 1) numbering

0361 002 M NORTH_AMERICAN_NUMBER

NS alive retries 0007 049 M NS_ALIVE_RETRIES

NS block retries 0005 049 M NS_BLOCK_RETRIES

NS level block timer

0000 049 M TNS_BLOCK

NS reset retries 0008 049 M NS_RESET_RETRIES

NS unblock retries 0006 049 M NS_UNBLOCK_RETRIES

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 282: 10

282 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a5Confidential

PRFILE and FIFILE parameter index by parameter function

Number of alarm outputs directed by alarms

0002 016 M ALARM_DRIVEN_OUTPUTS

Number of BTS realtime updates in a day

0090 009 M BTS_Q1_RT_UPDATE_COUNT

Number of Q1 channels to be reserved

0075 009 M NUMBER_OF_Q1_CHANNELS

Overflow login delay in MMI User Identification

0003 044 M OVERFLOW_LOGIN_DELAY

Password Policy Feature

0000 058 No PW_POLICY_FEATURE

PCM transfer selection path for BSC3i upgrade

1500 002 M BSC_PCMMAP_PATH_CTRL

PCU Load Notifica-tion lifetime

0099 046 M SUSPEND_PCU_LOAD_NOTIF

PFC PFT LEGACY STRM

0090 046 M PFC_PFT_LEGACY_STRM

PFC_PFT_MAX_NRT

0102 046 M PFC_PFT_MAX_NRT

PFC_PFT_MAX_RT

0103 046 M PFC_PFT_MAX_RT

Position Based Services

0654 002 No PBS_USAGE

Position Based Services

0749 002 No LB_USAGE

Position Based Services

0750 002 No LB_PLUS

Position Based Services

0829 002 No LB_STACK_IN_BCSU

POLLING INTERVAL BG

0087 046 M POLLING_INTERVAL_BG

POLLING INTERVAL BG LOW

0113 046 M POLLING_INTERVAL_BG_LOW

POLLING INTERVAL IA

0086 046 M POLLING_INTERVAL_IA

POLLING INTERVAL IA LOW

0114 046 M POLLING_INTERVAL_IA_LOW

POLLING INTERVAL ST LOW

0115 046 M POLLING_INTERVAL_ST_LOW

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 283: 10

DN9979835 283

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterfunction

Id:0900d8058075d0a5Confidential

POLLING INTERVAL STRM

0085 046 M POLLING_INTERVAL_STRM

Pre-emptive trans-mission

0064 046 M PRE_EMPTIVE_TRANSMISSIO

Preemption usage. 0016 010 M PREEMPT_USAGE

Priority-based service separation

0012 010 M PRIOR_BASED_SERV_SEP

Priority class back-ground and traffic class 1

0067 049 M BACKGROUND_ARP1

Priority class back-ground and traffic class 2

0068 049 M BACKGROUND_ARP2

Priority class back-ground and traffic class 3

0069 049 M BACKGROUND_ARP3

Priority class con-versational and traffic class 1

0052 049 M CONVERSATIONAL_ARP1

Priority class con-versational and traffic class 2

0053 049 M CONVERSATIONAL_ARP2

Priority class con-versational and traffic class 3

0054 049 M CONVERSATIONAL_ARP3

Priority class inter-active 1 and traffic class 1

0058 049 M INTERACT_PRIOR_1_ARP1

Priority class inter-active 1 and traffic class 2

0059 049 M INTERACT_PRIOR_1_ARP2

Priority class inter-active 1 and traffic class 3

0060 049 M INTERACT_PRIOR_1_ARP3

Priority class inter-active 2 and traffic class 1

0061 049 M INTERACT_PRIOR_2_ARP1

Priority class inter-active 2 and traffic class 2

0062 049 M INTERACT_PRIOR_2_ARP2

Priority class inter-active 2 and traffic class 3

0063 049 M INTERACT_PRIOR_2_ARP3

Priority class inter-active 3 and traffic class 1

0064 049 M INTERACT_PRIOR_3_ARP1

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 284: 10

284 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a5Confidential

PRFILE and FIFILE parameter index by parameter function

Priority class inter-active 3 and traffic class 2

0065 049 M INTERACT_PRIOR_3_ARP2

Priority class inter-active 3 and traffic class 3

0066 049 M INTERACT_PRIOR_3_ARP3

Priority class streaming and traffic class 1

0055 049 M STREAMING_ARP1

Priority class streaming and traffic class 2

0056 049 M STREAMING_ARP2

Priority class streaming and traffic class 3

0057 049 M STREAMING_ARP3

Processor load rate measurement interval

0008 009 M LOAD_RATE_SAMPLE_INTERV

PS_NULL_NRI support

0082 049 M PS_NULL_NRI_SUPPORT

Q3 CM in use 0002 060 M Q3_CM

Q3 DX alarm for-warding enabled

0241 002 M Q3_DX_ALARMS_FORW_ON

Q3 FM in use 0000 060 M Q3_FM

Q3 HW in use 0004 060 M Q3_HW

Q3 Interface in Use 0814 002 M Q3_IN_USE

Q3 PM in use 0001 060 M Q3_PM

Q3 SW in use 0003 060 M Q3_SW

Q3 Trace in use 0005 060 M Q3_TRACE

Q3 UM in use 0006 060 M Q3_UM

QoS upgrade time 0111 046 M QOS_UPGRADE_TIME

Radio Network Optimization Sta-tistics Usage

0027 010 M RNOS_USAGE_P

RAC UPDATE RETRIES

0038 049 M RAC_UPDATE_RETRIES

Remote interroga-tion of the BTS serial and version numbers feature

0032 010 M Q3_BTS_HW_REM_INQ_USE

Remote MMI flag 0173 002 No REMOTE_MMI

Resegment mode selector

0119 046 M RESEGMENT_MODE

Resume retries 0072 049 M RESUME_RETRIES

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 285: 10

DN9979835 285

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterfunction

Id:0900d8058075d0a5Confidential

Reversed hunting 0643 002 No REV_HUNT_USED

RX Quality Statis-tics and Handover Adjacent Cell Mea-surement

0028 010 M RXQ_HAC_USAGE_P

R_dif limit value 0020 049 M FC_R_DIF_TRG_LIMIT

Satellite Abis 0031 010 M SATELL_ABIS_IN_USE

SDCCH Handover 0022 010 M SDCCH_HO_USAGE_P

Secure Shell (SSH) Server feature

0002 058 No SSH_SERVER_FEATURE

Security event alarm limit

0028 009 M SEC_EVENT_ALARM_LIMIT

Security reporting event load limit

0137 009 M SEC_EVENT_LOAD_LIMIT

SEGMENT USAGE

0665 002 No SEGMENT_USAGE

Select OCTFIL variant to use

1554 002 M SEL_OCTFIL_VARIANT_TO

Service terminal commands collect-ing allowed

0000 056 M LOG_ON

SFTP Server feature

0003 058 No SFTP_SERVER_FEATURE

SMS CB DRX in BSC; Usage

0034 010 M SMS_CB_DRX_USD_IN_BSC

SMS CB last block information used in BSC

0418 002 M SMSCB_LAST_BLOCK_INFO

SMS CB pages considered inde-pendent by the BSC

0470 002 M SMSCB_INDEPEN_MULTIPAGE

Spare attenuated channel number

0031 037 F ATT_850_CH_NBR_6

Spare attenuated channel number

0032 037 F ATT_850_CH_NBR_7

Start time of the prompt mainte-nance alarm indi-cation

0004 010 F PCM_MAINT_ANNOUNCE_TL

Starting Time of Existence Data Collection of BTS-Controlled Trans-mission Equipment

0055 009 M TR_EQU_COLL_START_TIM

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 286: 10

286 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a5Confidential

PRFILE and FIFILE parameter index by parameter function

Sub-network service add retries

0032 049 M SNS_ADD_RETRIES

Sub-network service change-weights retries

0034 049 M SNS_CHANGEWEIGHTS_RETRI

Sub-network service config retries

0033 049 M SNS_CONFIG_RETRIES

Sub-network service delete retries

0035 049 M SNS_DELETE_RETRIES

Sub-network service size retries

0036 049 M SNS_SIZE_RETRIES

Support for Enhanced Mea-surement Report

0776 002 No EMR_SUPPORT_IN_BSC

Support for the commercial location request in UTDOA system

1006 002 No UTDOA_COMMERCIAL

Support for the UTDOA system

0905 002 No UTDOA_SUPPORT

Suspend retries 0016 049 M SUSPEND_RETRIES

SYNC_RECOV_ENABLED

0042 037 M SYNC_RECOV_ENABLED

T1 environment 0188 002 F T1_ENVIRONMENT

TBF load guard threshold

0061 046 M TBF_LOAD_GUARD_THRSHLD

TBF signal guard threshold

0062 046 M TBF_SIGNAL_GRD_THRSHLD

Territory balance threshold

0059 046 M TERRIT_BALANCE_THRSHLD

Text Telephone (TTY)

0702 002 No TTY_USAGE

TGB RAC UPDATE

0037 049 M TGB_RAC_UPDATE

The default NE name text used in main heading printout

0006 044 M DEF_MAIN_HEADING_TEXT

The usage of chained cells in rapid field drop

0024 010 M CHAINED_CELL_USAGE_P

The usage of extended cell radius

0020 010 M EXT_CELL_USAGE_P

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 287: 10

DN9979835 287

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameterfunction

Id:0900d8058075d0a5Confidential

Three digit MNC 0399 002 No THREE_DIGIT_MNC

Threshold value for degraded minutes

0010 009 F CRC4_TRH_FOR_DEGRAD_MIN

Threshold value for errored seconds

0011 009 F CRC4_TRH_FOR_ERRORE_SEC

Time limit for indi-cating cell broad-cast interruptions to CBC

0072 009 M CBC_INDIC_FILT_TIMER

Timer for Gb reset 0010 049 M TGB_RESET

Timer for Gb resume

0073 049 M TGB_RESUME

Timer for Gb suspend

0011 049 M TGB_SUSPEND

Timer for NS level alive procedure

0003 049 M TNS_ALIVE

Timer for NS level reset

0001 049 M TNS_RESET

Timer for NS level test

0002 049 M TNS_TEST

Timer for sub-network service procedures

0031 049 M TSNS_PROV

Timer of GB block 0009 049 M TGB_BLOCK

TIME LIMIT FOR METROSITE BCF RESTART DUE TO LOSS OF LMU SYNC

0046 037 M LMUSYN_LOSS_C_RESET_LIM

TIME LIMIT FOR ULTRASITE BCF RESTART DUE TO LOSS OF LMU SYNC

0044 037 M LMUSYN_LOSS_RESET_LIMIT

Total FEP usage 0820 002 No TOTAL_FEP_USAGE

Transmission equipment checksum collec-tion count

0079 009 M TRE_CHKSUM_COLL_COUNT

Transmission equipment software download multicast address

0602 002 M TRE_SW_DL_MC_ADDRESS

Trunk Reservation 0008 010 M TR_USAGE

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 288: 10

288 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a5Confidential

PRFILE and FIFILE parameter index by parameter function

Trunk Reservation in mobile termi-nated call

0007 010 M TR_USAGE_IN_MTC

Unsuccessful security reporting event alarm limit

0138 009 M SEC_EVENT_UNSUC_LIMIT

Uplink Rx-level for-getting factor

0055 046 M UPLNK_RX_LEV_FRG_FACTOR

Uplink temporary block flow release delay

0068 046 M UL_TBF_RELEASE_DELAY

Uplink temporary block flow release delay for DTM call

0118 046 M UL_DTM_TBF_REL_DELAY

Uplink TBF release delay for DTM call in extended mode

0117 046 M UL_DTM_TBF_RELDELAY_EXT

Uplink TBF release delay in extended mode

0071 046 M UL_TBF_REL_DELAY_EXT

Uplink TBF sched-uling rate in extended mode release delay

0072 046 M UL_TBF_SCHED_RATE_EXT

Usage of Acoustic Echo Canceller

0371 002 No AEC_USAGE

Usage of the feature Flexible counter selection set

0052 010 M FCS_SET_USAGE

Use of CBC inter-face in BSC

0044 010 M SMS_CBC_USD_IN_BSC

Use of Tandem-Free Operation

0372 002 No TFO_USAGE

Use of Trace Window for Dropped Calls feature

0051 010 M DC_OBSERVATION_USAGE

User Account Lock Limit

0004 058 M USER_ACCOUNT_LOCK_LIMIT

User Account Policy Feature

0001 058 No UA_POLICY_FEATURE

Function Number Class F/M Name

Table 8 Index by parameter function. (Cont.)

Page 289: 10

DN9979835 289

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameternumber

Id:0900d8058075d0a8Confidential

7 PRFILE and FIFILE parameter index by parameter number

Number Class F/M Name Function

0035 002 F PRIMARY_RATE_INTERFACE

Exchange has pos-sibility to primary rate interface con-nections

0093 002 No DOUBLE_BA_LIST Double BCCH allo-cation list

0094 002 No TRANSM_EQ_MML_ENABLE

BSS Transmission Equipment Handling MML enabling parame-ter

0173 002 No REMOTE_MMI Remote MMI flag

0188 002 F T1_ENVIRONMENT T1 enviroment

0241 002 M Q3_DX_ALARMS_FORW_ON

Q3 DX alarm for-warding enabled

0283 002 No HR_FEATURE_IN_BSC Half Rate feature installed in BSC

0361 002 M NORTH_AMERICAN_NUMBER

North American (World Zone 1) numbering

0371 002 No AEC_USAGE Usage of Acoustic Echo Canceller

0372 002 No TFO_USAGE Use of Tandem-Free Operation

0380 002 No ALLOW_OVER_16TRX Creating more than 16 TRXs in a BCSU

0399 002 No THREE_DIGIT_MNC Three digit MNC

0417 002 No FH_IUO_USAGE Frequency hopping for intelligent underlay overlay usage.

0418 002 M SMSCB_LAST_BLOCK_INFO

SMS CB last block information used in BSC

0444 002 No BTS_HW_DB_Q3_INT_IN_USE

BTS HW Database Q3 Interface appli-cation is in use

0461 002 M BIN_HEADER_TYPE Binary report header type

0466 002 No FLEX_MAIO_USAGE Flexible maio man-agement usage.

Table 9 Index by parameter number.

Page 290: 10

290 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a8Confidential

PRFILE and FIFILE parameter index by parameter number

0470 002 M SMSCB_INDEPEN_MULTIPAGE

SMS CB pages considered inde-pendent by the BSC

0500 002 No ALLOW_48_OR_64_TRX Larger Capacity BSC: Creation of 48 TRXs (BSCE) and 64 TRXs (BSC2E/A ) in a BCSU

0511 002 F ABIS_AUTOCONF_IN_USE BSC Support for Autoconfiguration: Abis autoconfigu-ration in use

0558 002 No MS_CAP_IND_USAGE Authorisation of the use of the MS Capability Indica-tion measurement

0602 002 M TRE_SW_DL_MC_ADDRESS

Transmission equipment software download multicast address

0623 002 No NOISE_SUPPRESSION_USAGE

Noise Suppres-sion, use of

0626 002 No DAC_USAGE Defined Adjacent Cell measurement, use of

0628 002 No FER_USAGE FER measurement

0643 002 No REV_HUNT_USED Reversed hunting

0644 002 No DYN_ABIS_IN_USE Dynamic Abis allo-cation in use

0654 002 No PBS_USAGE Position Based Services

0664 002 No COMMON_BCCH_EGSM900

COMMON BCCH EGSM900

0665 002 No SEGMENT_USAGE SEGMENT USAGE

0666 002 No COMMON_BCCH_GSM900 COMMON BCCH GSM900

0667 002 No COMMON_BCCH_GSM1800 COMMON BCCH GSM1800

0668 002 No MULTI_BCF MULTI BCF

0693 002 M FIRST_FREE_NUMBERED_CGR

First allowed circuit group number for free numbered circuit groups.

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 291: 10

DN9979835 291

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameternumber

Id:0900d8058075d0a8Confidential

0701 002 No S9_LOCATION_SYSTEM Cell ID, TA and RxLevel delivery to Standalone SMLC

0702 002 No TTY_USAGE Text Telephone (TTY)

0711 002 M NEMU_IS_PRESENT NEMU is present in the network element

0733 002 No COMMON_BCCH_GSM800 COMMON BCCH GSM800

0734 002 No COMMON_BCCH_GSM1900 COMMON BCCH GSM1900

0737 002 No GSM800_1900_USAGE Dual Band for GSM800/GSM1900 usage

0738 002 No GSM800_1800_USAGE Dual Band for GSM800/GSM1800 usage

0739 002 No ISHO_SUPPORT_IN_BSC Inter-System HO support in BSC

0749 002 No LB_USAGE Position Based Services

0750 002 No LB_PLUS Position Based Services

0764 002 No CITARX_USAGE CITARX usage

0776 002 No EMR_SUPPORT_IN_BSC Support for Enhanced Mea-surement Report

0790 002 M HW_INVENTORY_IN_USE HW Inventory ON/OFF

0809 002 No ANTENNA_HOPPING_USAGE

Antenna hopping for UltraSite

0814 002 M Q3_IN_USE Q3 Interface in Use

0820 002 No TOTAL_FEP_USAGE Total FEP usage

0829 002 No LB_STACK_IN_BCSU Position Based Services

0839 002 No BTS_METRO_SITE_BATBU_PR

Intelligent Shutdown for Met-roSite BTS

0843 002 No BTS_ULTRA_SITE_BATBU_PR

Intelligent Shutdown for Ultra-Site BTS

0857 002 No CHILD_CELL_BAR Child Cell Barred Check

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 292: 10

292 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a8Confidential

PRFILE and FIFILE parameter index by parameter number

0899 002 No EXT_UTBF_USAGE Extended uplink TBF mode feature usage

0905 002 No UTDOA_SUPPORT Support for the UTDOA system

0921 002 M HW_CHANGE_NOTIF_IN_USE

Equipment database change notifications ON/OFF

0947 002 No BSR_SUPPORT_IN_BSC BSR Usage

1006 002 No UTDOA_COMMERCIAL Support for the commercial location request in UTDOA system

1114 002 No EQOS_TESTING_MODE Allowing configure PCU2 with EQoS enabled in a same track with PCUs.

1120 002 M LAN_ADMINISTRATION Integrated LAN Administration feature activation

1167 002 M COMBI_CONF_ALLOWED Combi BSC3i/TCSM3i configuration allowed

1264 002 No EMR_RESTRICTED EMR activation restricted in BSC

1475 002 No RNW_OM_LOG_USAGE Automated RNW O&M log collection feature control usage

1500 002 M BSC_PCMMAP_PATH_CTRL

PCM transfer selection path for BSC3i upgrade

1554 002 M SEL_OCTFIL_VARIANT_TO Select OCTFIL variant to use

0008 009 M LOAD_RATE_SAMPLE_INTERV

Processor load rate measurement interval

0010 009 F CRC4_TRH_FOR_DEGRAD_MIN

Threshold value for degraded minutes

0011 009 F CRC4_TRH_FOR_ERRORE_SEC

Threshold value for errored seconds

0028 009 M SEC_EVENT_ALARM_LIMIT Security event alarm limit

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 293: 10

DN9979835 293

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameternumber

Id:0900d8058075d0a8Confidential

0029 009 M SEC_EVENT_MON_PERIOD

Monitoring period for number of security events

0037 009 M BTS_SITE_BATBU_PROC BTS site battery backup procedure

0044 009 M EXCL_EST_CAUSES_HO_REF

Exclusion of estab-lishment cause values from handover refer-ence.

0049 009 M BITMAP_CHECK_RECORDS

Maximum count of records checked in one bitmap super-vision interval

0050 009 M BITMAP_CHECK_BYTES Maximum count of bytes checked in one bitmap super-vision interval

0051 009 M BITMAP_SUPERV_INTERVAL

Bitmap supervi-sion interval

0052 009 M CHKSUM_SUPERV_INTERVAL

Checksum supervi-sion interval

0055 009 M TR_EQU_COLL_START_TIM

Starting Time of Existence Data Collection of BTS-Controlled Trans-mission Equipment

0072 009 M CBC_INDIC_FILT_TIMER Time limit for indi-cating cell broad-cast interruptions to CBC

0075 009 M NUMBER_OF_Q1_CHANNELS

Number of Q1 channels to be reserved

0079 009 M TRE_CHKSUM_COLL_COUNT

Transmission equipment checksum collec-tion count

0090 009 M BTS_Q1_RT_UPDATE_COUNT

Number of BTS realtime updates in a day

0098 009 M SDCCH_SIGN_SUP_BTS_MSC

Guard timer for long SDCCH reser-vations

0137 009 M SEC_EVENT_LOAD_LIMIT Security reporting event load limit

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 294: 10

294 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a8Confidential

PRFILE and FIFILE parameter index by parameter number

0138 009 M SEC_EVENT_UNSUC_LIMIT Unsuccessful security reporting event alarm limit

0004 010 F PCM_MAINT_ANNOUNCE_TL

Start time of the prompt mainte-nance alarm indi-cation

0005 010 M DR_USAGE Directed Retry

0006 010 M IDR_USAGE Intelligent Directed Retry

0007 010 M TR_USAGE_IN_MTC Trunk Reservation in mobile termi-nated call

0008 010 M TR_USAGE Trunk Reservation

0011 010 M CM_BASED_SUBS_TYPE Classmark-based subscriber type

0012 010 M PRIOR_BASED_SERV_SEP Priority-based service separation

0014 010 M C2_CELL_RESEL C2 microcell re-selection parame-ter in use

0015 010 M FACCH_CALL_SET_UP FACCH call set-up in use

0016 010 M PREEMPT_USAGE Preemption usage.

0019 010 M CI_BASED_HO_EVAL_P C/I based HO can-didate evaluation

0020 010 M EXT_CELL_USAGE_P The usage of extended cell radius

0021 010 M MS_PWR_OPT_IN_HO_P MS power optimi-zation in handover

0022 010 M SDCCH_HO_USAGE_P SDCCH Handover

0023 010 M UNDERLAY_OVERLAY_US_P

Intelligent underlay-overlay

0024 010 M CHAINED_CELL_USAGE_P The usage of chained cells in rapid field drop

0025 010 M FMMS_USAGE_P Fast Moving MS Handling Usage

0026 010 M DUAL_BAND_USAGE_P Dual Band GSM/DCS Network Operation usage

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 295: 10

DN9979835 295

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameternumber

Id:0900d8058075d0a8Confidential

0027 010 M RNOS_USAGE_P Radio Network Optimization Sta-tistics Usage

0028 010 M RXQ_HAC_USAGE_P RX Quality Statis-tics and Handover Adjacent Cell Mea-surement

0030 010 M DISTANCE_VERIFYING Distance Verifying

0031 010 M SATELL_ABIS_IN_USE Satellite Abis

0032 010 M Q3_BTS_HW_REM_INQ_USE

Remote interroga-tion of the BTS serial and version numbers feature

0033 010 M EFR_SUPPORT_IN_BSC EFR speech coder support in BSC

0034 010 M SMS_CB_DRX_USD_IN_BSC

SMS CB DRX in BSC; Usage

0035 010 M HOT_SPOT_USAGE_P Hot Spot Location usage

0036 010 M CI_STATISTICS_USAGE_P C/I Ratio Statistics

0042 010 M DYNAMIC_SDCCH Dynamic SDCCH in BSC

0044 010 M SMS_CBC_USD_IN_BSC Use of CBC inter-face in BSC

0045 010 M ICE_USAGE_P Handover Support for Coverage Enhancements

0046 010 M ERFD_USAGE_P Enhanced Rapid Field Drop

0047 010 M HSCSD_USAGE HSCSD in BSC

0048 010 M DATA_144_USAGE 14.4 kbit/s in BSC

0050 010 M DADLB_USAGE_P Direct Access to Desired Layer/Band Usage

0051 010 M DC_OBSERVATION_USAGE

Use of Trace Window for Dropped Calls feature

0052 010 M FCS_SET_USAGE Usage of the feature Flexible counter selection set

0053 010 M AMH_USAGE_P Advanced Multi-layer Handling Usage

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 296: 10

296 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a8Confidential

PRFILE and FIFILE parameter index by parameter number

0065 010 M CHAN_FIN_USAGE_P Channel Finder measurement, use of

0068 010 M RCS_FER_FILTER Data filtering from FER measurement

0071 010 M DTM_CALL_PENALTY_TIMER

DTM call assign-ment penalty timer

0039 012 M NAMETBL_MAX_SERV Maximum amount of services in nametable

0000 016 M ALARM_PRINT_END_MARK Alarm print end mark

0001 016 M LAMP_PANEL_POLARITY Lamp panel polarity

0002 016 M ALARM_DRIVEN_OUTPUTS Number of alarm outputs directed by alarms

0003 016 M LAMP_PANEL_BUZZER Activation of lamp panel buzzer by alarms

0007 016 M BTS_ALARM_FILTERING_USE

Base Station alarm filtering in BSC, use of

0000 037 F ATTN_FOR_2_GEN_BTS Attenuation value for 2nd generation BTS

0001 037 F ATTN_FOR_3_GEN_BTS Attenuation value for Talk-family BTS

0002 037 F ATTN_FOR_4_GEN_BTS Attenuation value for PrimeSite BTS

0003 037 F ATTENUATED_CH_NBR_1 1. attenuated channel number

0004 037 F ATTENUATED_CH_NBR_2 2. attenuated channel number

0005 037 F ATTENUATED_CH_NBR_3 3. attenuated channel number

0006 037 F ATTENUATED_CH_NBR_4 4. attenuated channel number

0007 037 F ATTENUATED_CH_NBR_5 5. attenuated channel number

0008 037 F ATTENUATED_CH_NBR_6 6. attenuated channel number

0009 037 F ATTENUATED_CH_NBR_7 7. attenuated channel number

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 297: 10

DN9979835 297

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameternumber

Id:0900d8058075d0a8Confidential

0010 037 F ATTENUATED_CH_NBR_8 8. attenuated channel number

0011 037 F ATTENUATED_CH_NBR_9 9. attenuated channel number

0012 037 F ATTENUATED_CH_NBR_10 10. attenuated channel number

0013 037 F ATTENUATED_CH_NBR_11 11. attenuated channel number

0014 037 F ATTENUATED_CH_NBR_12 12. attenuated channel number

0015 037 F ATTENUATED_CH_NBR_13 13. attenuated channel number (spare)

0016 037 F ATTENUATED_CH_NBR_14 14. attenuated channel number (spare)

0017 037 F ATTENUATED_CH_NBR_15 15. attenuated channel number (spare)

0018 037 F ATTENUATED_CH_NBR_16 16. attenuated channel number (spare)

0019 037 F ATTENUATED_CH_NBR_17 17. attenuated channel number (spare)

0022 037 F ATTN_FOR_METROSITE_BTS

Attenuation value for MetroSite BTS

0024 037 F ATTN_FOR_ULTRASITE_BTS

Attenuation value for UltraSite BTS

0025 037 F ATTN_FOR_INSITE_BTS Attenuation value for InSite BTS

0026 037 F ATT_850_CH_NBR_1 Attenuated channel number 128

0027 037 F ATT_850_CH_NBR_2 Attenuated channel number 181

0028 037 F ATT_850_CH_NBR_3 Attenueted channel number 183

0029 037 F ATT_850_CH_NBR_4 Attenuated channel number 231

0030 037 F ATT_850_CH_NBR_5 Attenuated channel number 233

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 298: 10

298 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a8Confidential

PRFILE and FIFILE parameter index by parameter number

0031 037 F ATT_850_CH_NBR_6 Spare attenuated channel number

0032 037 F ATT_850_CH_NBR_7 Spare attenuated channel number

0033 037 F ATT_850_CH_NBR_8 Attenuated channel number 251

0034 037 F ATT_850_CH_NBR_9 Attenuated spare channel number

0035 037 F ATT_850_CH_NBR_10 Attenuated second spare channel number

0036 037 F INC_SIGNAL_WAITING_TIME

Incoming signal waiting time

0037 037 F ATTN_FOR_800_CH_6_ULTRA

Attenuation value for UltraSite BTS

0038 037 F ATTN_FOR_800_CH_7_ULTRA

Attenuation value for UltraSite BTS

0039 037 M IUO_RECOVERY_NOT_DONE

IUO_RECOVERY_NOT_DONE

0040 037 M MAX_BSC_TRE_SW_DL_COUNT

BSC site maximum concurrent software down-loading count

0041 037 M MAX_BTS_TRE_SW_DL_COUNT

BTS site maximum concurrent software down-loading count

0042 037 M SYNC_RECOV_ENABLED SYNC_RECOV_ENABLED

0043 037 M LMUSYN_LOSS_ALARM_LIMIT

LOSS OF LMU SYNCHRONISA-TION ALARM LIMIT

0044 037 M LMUSYN_LOSS_RESET_LIMIT

TIME LIMIT FOR ULTRASITE BCF RESTART DUE TO LOSS OF LMU SYNC

0046 037 M LMUSYN_LOSS_C_RESET_LIM

TIME LIMIT FOR METROSITE BCF RESTART DUE TO LOSS OF LMU SYNC

0000 038 M WRITE_CACHE_TIMEOUT MML Command Log: write cache timeout

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 299: 10

DN9979835 299

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameternumber

Id:0900d8058075d0a8Confidential

0001 038 M STORAGE_LENGTH MML Command Log: storage length of log contents

0002 038 M MAX_FILE_COUNT MML Command Log and Service Terminal Log: Maximum file count

0003 038 M ADMINISTRATION_HOUR MML Command Log: Hour part of administration time

0004 038 M ADMINISTRATION_MINUTES

MML Command Log and Service Terminal Log: Minutes part of administration time

0000 044 M PW_CHAR_TO_PRINT Character to be printed on terminal when entering password.

0001 044 M FIRST_MMI_LOGIN_DELAY First login delay in MMI User Identifi-cation.

0002 044 M MAX_MMI_LOGIN_DELAY Maximum login delay in MMI User Identification.

0003 044 M OVERFLOW_LOGIN_DELAY

Overflow login delay in MMI User Identification

0005 044 M DISCLAIMER_TEXT Activation parame-ter for feature MMI Disclaimer Display

0006 044 M DEF_MAIN_HEADING_TEXT

The default NE name text used in main heading printout

0046 046 M MEMORY_OUT_FLAG_SUM Memory out flag sum

0047 046 M EGPRS_UPLINK_PENALTY EGPRS uplink penalty

0048 046 M EGPRS_UPLINK_THRESHOLD

EGPRS uplink threshold

0049 046 M EGPRS_DOWNLINK_PENALTY

EGPRS downlink penalty

0050 046 M EGPRS_DWNLINK_THRESHOLD

EGPRS downlink threshold

0051 046 M GPRS_UPLINK_PENALTY GPRS uplink penalty

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 300: 10

300 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a8Confidential

PRFILE and FIFILE parameter index by parameter number

0052 046 M GPRS_UPLINK_THRESHOLD

GPRS uplink threshold

0053 046 M GPRS_DOWNLINK_PENALTY

GPRS downlink parameters

0054 046 M GPRS_DOWNLINK_THRESHOLD

GPRS downlink threshold

0055 046 M UPLNK_RX_LEV_FRG_FACTOR

Uplink Rx-level for-getting factor

0059 046 M TERRIT_BALANCE_THRSHLD

Territory balance threshold

0060 046 M TERRIT_UPD_GTIME_GPRS

GPRS territory update guard time

0061 046 M TBF_LOAD_GUARD_THRSHLD

TBF load guard threshold

0062 046 M TBF_SIGNAL_GRD_THRSHLD

TBF signal guard threshold

0064 046 M PRE_EMPTIVE_TRANSMISSIO

Pre-emptive trans-mission

0066 046 F BCCH_BAND_TBF_THRSHLD

BCCH band TBF threshold

0067 046 M DL_TBF_RELEASE_DELAY Downlink tempo-rary block flow release delay

0068 046 M UL_TBF_RELEASE_DELAY Uplink temporary block flow release delay

0071 046 M UL_TBF_REL_DELAY_EXT Uplink TBF release delay in extended mode

0072 046 M UL_TBF_SCHED_RATE_EXT

Uplink TBF sched-uling rate in extended mode release delay

0085 046 M POLLING_INTERVAL_STRM POLLING INTERVAL STRM

0086 046 M POLLING_INTERVAL_IA POLLING INTERVAL IA

0087 046 M POLLING_INTERVAL_BG POLLING INTERVAL BG

0090 046 M PFC_PFT_LEGACY_STRM PFC PFT LEGACY STRM

0091 046 M EGPRS_GPRS_MUX_PENALTY

EGPRS GPRS MUX PENALTY

0092 046 M GPRS_UL_MUX_DEC_FACTOR

GPRS UL MUX DEC FACTOR

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 301: 10

DN9979835 301

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameternumber

Id:0900d8058075d0a8Confidential

0093 046 M EGPRS_DL_MUX_DEC_FACTOR

EGPRS DL MUX DEC FACTOR

0096 046 M NCCR_NON_DRX_PERIOD NCCR Non DRX Period

0097 046 M NCCR_MEAS_REPORT_TYPE

NCCR measure-ment report type

0099 046 M SUSPEND_PCU_LOAD_NOTIF

PCU Load Notifica-tion lifetime

0100 046 M CHA_CONC_UL_TBF_FAV_DIR

CHA_CONC_UL_TBF_FAVOR_DIR

0101 046 M CHA_CONC_DL_TBF_FAV_DIR

CHA_CONC_DL_TBF_FAVOR_DIR

0102 046 M PFC_PFT_MAX_NRT PFC_PFT_MAX_NRT

0103 046 M PFC_PFT_MAX_RT PFC_PFT_MAX_RT

0105 046 M DTM_CALL_ASSIGN_TIMER

DTM call assign-ment timer

0106 046 M MAX_LAPD_LENGHT Maximum LAPD message length

0107 046 M DTM_MS_CL_11_SUPP_EDA

DTM Multislot Class 11 mobile extended dynamic allocation mode support

0109 046 M IBNACC_POLLING_TIME IBNACC polling time

0110 046 M LBNCCR_MIN_INTERVAL_PLR

LBNCCR Minimum Interval Between PS Load Reports

0111 046 M QOS_UPGRADE_TIME QoS upgrade time

0113 046 M POLLING_INTERVAL_BG_LOW

POLLING INTERVAL BG LOW

0114 046 M POLLING_INTERVAL_IA_LOW

POLLING INTERVAL IA LOW

0115 046 M POLLING_INTERVAL_ST_LOW

POLLING INTERVAL ST LOW

0116 046 M DL_DTM_TBF_REL_DELAY Downlink tempo-rary block flow release delay for DTM call

0117 046 M UL_DTM_TBF_RELDELAY_EXT

Uplink TBF release delay for DTM call in extended mode

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 302: 10

302 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a8Confidential

PRFILE and FIFILE parameter index by parameter number

0118 046 M UL_DTM_TBF_REL_DELAY Uplink temporary block flow release delay for DTM call

0119 046 M RESEGMENT_MODE Resegment mode selector

0126 046 M BTS_DLDC_TSL_BALANC_THR

BTS DLDC TSL BALANCE THRESHOLD

0000 049 M TNS_BLOCK NS level block timer

0001 049 M TNS_RESET Timer for NS level reset

0002 049 M TNS_TEST Timer for NS level test

0003 049 M TNS_ALIVE Timer for NS level alive procedure

0005 049 M NS_BLOCK_RETRIES NS block retries

0006 049 M NS_UNBLOCK_RETRIES NS unblock retries

0007 049 M NS_ALIVE_RETRIES NS alive retries

0008 049 M NS_RESET_RETRIES NS reset retries

0009 049 M TGB_BLOCK Timer of GB block

0010 049 M TGB_RESET Timer for Gb reset

0011 049 M TGB_SUSPEND Timer for Gb suspend

0013 049 M BVC_BLOCK_RETRIES BVC block retries

0014 049 M BVC_UNBLOCK_RETRIES BVC unblock retries

0015 049 M BVC_RESET_RETRIES BVC reset retries

0016 049 M SUSPEND_RETRIES Suspend retries

0020 049 M FC_R_DIF_TRG_LIMIT R_dif limit value

0021 049 M FC_MS_R_DEF MS-specific leak rate default value

0022 049 M FC_MS_R_DEF_EGPRS MS-specific leak rate default value for EGPRS

0023 049 M FC_MS_R_MIN Minimum value of MS leak rate

0024 049 M FC_MS_B_MAX_DEF Buffering capacity default value

0025 049 M FC_MS_B_MAX_DEF_EGPRS

Buffering capacity default value

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 303: 10

DN9979835 303

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameternumber

Id:0900d8058075d0a8Confidential

0026 049 M FC_R_TSL GPRS timeslot transmission capacity

0027 049 M FC_R_TSL_EGPRS EGPRS timeslot transmission capacity

0028 049 M FC_B_MAX_TSL GPRS timeslot buffering capacity

0029 049 M FC_B_MAX_TSL_EGPRS EGPRS timeslot buffering capacity

0031 049 M TSNS_PROV Timer for sub-network service procedures

0032 049 M SNS_ADD_RETRIES Sub-network service add retries

0033 049 M SNS_CONFIG_RETRIES Sub-network service config retries

0034 049 M SNS_CHANGEWEIGHTS_RETRI

Sub-network service change-weights retries

0035 049 M SNS_DELETE_RETRIES Sub-network service delete retries

0036 049 M SNS_SIZE_RETRIES Sub-network service size retries

0037 049 M TGB_RAC_UPDATE TGB RAC UPDATE

0038 049 M RAC_UPDATE_RETRIES RAC UPDATE RETRIES

0052 049 M CONVERSATIONAL_ARP1 Priority class con-versational and traffic class 1

0053 049 M CONVERSATIONAL_ARP2 Priority class con-versational and traffic class 2

0054 049 M CONVERSATIONAL_ARP3 Priority class con-versational and traffic class 3

0055 049 M STREAMING_ARP1 Priority class streaming and traffic class 1

0056 049 M STREAMING_ARP2 Priority class streaming and traffic class 2

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 304: 10

304 DN9979835

PRFILE and FIFILE Parameter List

Id:0900d8058075d0a8Confidential

PRFILE and FIFILE parameter index by parameter number

0057 049 M STREAMING_ARP3 Priority class streaming and traffic class 3

0058 049 M INTERACT_PRIOR_1_ARP1 Priority class inter-active 1 and traffic class 1

0059 049 M INTERACT_PRIOR_1_ARP2 Priority class inter-active 1 and traffic class 2

0060 049 M INTERACT_PRIOR_1_ARP3 Priority class inter-active 1 and traffic class 3

0061 049 M INTERACT_PRIOR_2_ARP1 Priority class inter-active 2 and traffic class 1

0062 049 M INTERACT_PRIOR_2_ARP2 Priority class inter-active 2 and traffic class 2

0063 049 M INTERACT_PRIOR_2_ARP3 Priority class inter-active 2 and traffic class 3

0064 049 M INTERACT_PRIOR_3_ARP1 Priority class inter-active 3 and traffic class 1

0065 049 M INTERACT_PRIOR_3_ARP2 Priority class inter-active 3 and traffic class 2

0066 049 M INTERACT_PRIOR_3_ARP3 Priority class inter-active 3 and traffic class 3

0067 049 M BACKGROUND_ARP1 Priority class back-ground and traffic class 1

0068 049 M BACKGROUND_ARP2 Priority class back-ground and traffic class 2

0069 049 M BACKGROUND_ARP3 Priority class back-ground and traffic class 3

0072 049 M RESUME_RETRIES Resume retries

0073 049 M TGB_RESUME Timer for Gb resume

0082 049 M PS_NULL_NRI_SUPPORT PS_NULL_NRI support

0001 050 M MEA_REPORT_FORMATS Measurement Report Formats

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)

Page 305: 10

DN9979835 305

PRFILE and FIFILE Parameter List PRFILE and FIFILE parameter index by parameternumber

Id:0900d8058075d0a8Confidential

0000 053 No MSC_SERVER_SUPPORTED

MSC Server func-tionality active

0009 053 M DSCP_FOR_SIGNALLING Differentiated Services code-point for signalling traffic

0000 056 M LOG_ON Service terminal commands collect-ing allowed

0000 058 No PW_POLICY_FEATURE Password Policy Feature

0001 058 No UA_POLICY_FEATURE User Account Policy Feature

0002 058 No SSH_SERVER_FEATURE Secure Shell (SSH) Server feature

0003 058 No SFTP_SERVER_FEATURE SFTP Server feature

0004 058 M USER_ACCOUNT_LOCK_LIMIT

User Account Lock Limit

0005 058 No CONF_INTERFACES_FEATURE

Configurable O&M Interfaces Feature

0000 060 M Q3_FM Q3 FM in use

0001 060 M Q3_PM Q3 PM in use

0002 060 M Q3_CM Q3 CM in use

0003 060 M Q3_SW Q3 SW in use

0004 060 M Q3_HW Q3 HW in use

0005 060 M Q3_TRACE Q3 Trace in use

0006 060 M Q3_UM Q3 UM in use

0007 060 M NE3S_FM NE3S FM in use

0008 060 M NE3S_PM NE3S PM in use

0009 060 M NE3S_CM NE3S CM in use

0010 060 M NE3S_SW NE3S SW in use

0011 060 M NE3S_LM NE3S LM in use

0012 060 M NE3S_HW NE3S HW in use

0013 060 M NE3S_UM NE3S UM in use

0014 060 M NE3S_TRACE NE3S Trace in use

0015 060 M NE3S_ATL NE3S Audit Trail in use

Number Class F/M Name Function

Table 9 Index by parameter number. (Cont.)