10 th Annual GeoElections Conference .
15
10 th Annual GeoElections Conference www.icwmaps.com GeoAutho GeoAutho r r
-
Upload
stanley-eaton -
Category
Documents
-
view
214 -
download
0
Transcript of 10 th Annual GeoElections Conference .
10th Annual GeoElections Conference
www.icwmaps.com
Distribute Addresses - Proportionate
10th Annual GeoElections Conference
www.icwmaps.com
Add Segment
10th Annual GeoElections Conference
www.icwmaps.com
Create IntersectionThere are 3 methods for creating intersections:Method 1: Creating an intersection on a lineStep 1: Select lineStep 2: Right click to open floating GeoAuthor menu and select Create Intersection
Method 2: Creating an intersection on a line or a polylineStep 1: Using the Symbol tool place a point along the line/polylineStep 2: Select the point and the line/polyline you want the intersection to be created.Step 3: Right click and select create intersection.
**Rob’s Tool Tips Method 3: Creating an intersection on a polylineStep 1: Select a node on the poly within proximity of where you want to create your intersection and press Ctrl + C to copy the node and Ctrl + V to paste the node. Step 3: Then select the polyline and the newly pasted node, right click and select create intersection. **
10th Annual GeoElections Conference
www.icwmaps.com
Shape PointThe Shape Point tool allows the user to reshape a part of polyline or the entire polyline.
Step 1: Select the Polyline toolStep 2: Draw your new polyline. Step 3: Select your old line and your new line, right click and select Shape Point.
When using the Shape Point there is a short cut!When drawing in your new line you can use the autotrace feature within MapInfo! Step 1: Select the Polyline toolStep 2: After you put your end point down, draw up to your first node within the polyline.Step 3: Press the “T” key on the keyboard.Step 4: Continue Drawing your line skipping ahead a few nodes on the line. Finish drawing your line.Step 5: Select your old line and your new line, Right click and select Shape Point.
10th Annual GeoElections Conference
www.icwmaps.com
Node Split & Node Combine
Node Split
Node Combine
10th Annual GeoElections Conference
www.icwmaps.com
Node SplitStep 1: Right Click, MDN Off Step 2: Move the existing line
work to make room for the new line
Step 3: Select the line tool and draw in the new line making sure to connect your end points.
Step 4: Select three lines the middle one being the new line. Right click and select Node Split.
10th Annual GeoElections Conference
www.icwmaps.com
Node Combine
Step 1: Select the line (Middle Segment) you want to node combine. Right click and select node Combine.
Step 2: Move the node combined line off to the side.
10th Annual GeoElections Conference
www.icwmaps.com
MDN On
MDN Off
10th Annual GeoElections Conference
www.icwmaps.com
Erase LineThe erase line tool is a safety measure for deleting lines. It will only delete a line that you have created.
Retire TLIDIf there is line work you want to retire from the map but still want to keep in the event it needs to be reactivated you can retire it and move it aside. Simply select the line, right click and select retire TLID.
10th Annual GeoElections Conference
www.icwmaps.com
Preferences On
Preferences that can be altered within GeoAuthor > Preferences On:
1.Symbology by Line Type (Edit/Verify)2.MTFCC Preferences (On/OFF)3.Drag Drop Threshold Time 4.Distributed Addressing5.Postal Standards
10th Annual GeoElections Conference
www.icwmaps.com
The EndAny
Questions?
